Product range MEGAlife
|
|
|
- Patrick Hill
- 6 years ago
- Views:
Transcription
1 Product rnge Fx enquiries: MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible. This is the cse in clen nd dry surroundings or in pplictions with diffi cult lubriction pssge. MEGAlife mintennce free chins re corrosion resistnt due to nickel-plted prts nd cn be utilized in temperture rnge from 40 C up to +160 C. The chins re supplied either dry or with specil-purpose lubriction in line with the requirements of the pplied ppliction. 3
2 Telephone enquiries:
3 Product rnge Fx enquiries: MEGAlife I nd MEGAlife II The mintennce free iwis chins PROBLEM/INITIAL SITUATION Lubriction is not t ll or only prtly possible Clen & dry surroundings re required Difficult/obstructed lubriction pssge Contmintion of mnufcturing outlet nd conveyor pprtus due to chin lubriction OUR SOLUTION A high performnce, mintennce-free chin with redesigned joints. Innovtive technicl detils which result in n, s yet, unbetble service life, even without re-lubriction. CUSTOMER BENEFITS Excellent wer resistnce even t high speeds nd lods where conventionl mintennce free chins stretch Extremly high levels of ftigue nd breking strength Esy to dismntle Reduced overll mintennce cost Less production still-time Environmentlly-friendly due to bsence of excess lubriction Protected from corrosion Instlltions hve fewer down times Environmentlly friendly becuse lubriction is not necessry TECHNICAL FEATURES Avilble dry or with dditionl specil lubricnt Corrosion resistnt Temperture rnge from -40 C up to +160 C Avilble s roller chin ccording to ISO 606 for driving purposes or s conveyor chin with ttchments nd extended components. Semless roller with specil coting resistnt to wer nd corrosion Pin with n extremly hrdend surfce nd wer-resistnt coting Semless sintering bush mde of hrdened specil mteril 34
4 Telephone enquiries: HIGHLIGHTS MEGAlife I HIGHLIGHTS MEGAlife II AREAS OF APPLICATION Excellent wer resistnce even t high speeds nd lods where conventionl mintennce free chins stretch Mintennce free under certin conditions Extremly high levels of ftigue nd breking strenght Protected from corrosion Esy to dismntle Reduced overll mintennce cost Less production still-time Environmentlly friendly becuse lubriction is not necessry A distictive longer lifetime due to: A considerbly improved wer resistnce s result of specil thermo-chemicl tretment of the pins. Especilly by fst running chin drives v > 3 m/s Pckging & Food Industry Printing Industry Conveyor-Equipment Textile & Clothing Industry Pper Mnufcture & Book Binding Industry Electronic Industry & Circuit Bord Mnufcture Wood, Glss & Cermic Industry Medicl technology nd of course in ll res where re-lubriction is not t ll or only prtly possible. MEGAlife chins Tril without re-lubriction t high speeds. Grphic representtion corresponds to iwis test results. Stndrd chins iwis stndrd chins chin elongtion Mintennce free chins MEGAlife Lifetime competitive mintennce free chins MEGAlife I MEGAlife II Operting hours Chin type 35
5 Product rnge Fx enquiries: MEGAlife I roller chins Complying with DIN , ISO 606: 004 Breking strength F B Inner link Outer link DIN ISO no. Ref. no. iwis Pitch p ( ) Pitch p min. iwis (N) med. Stndrd (N) min. Breking re f (cm ) Weight per m q (kg/m) b min. g mx. mx. 1) mx. 1) Roller Pin mx. d mx. Trnsverse pitch e Article No. Simplex 06 B-1 G 67 ML* 3/8 9,55 5, ,8 0,41 8,53 8,0 1,90 16,70 6,35 3, B-1 L 85 ML 1/ 1,70 7, ,50 0,70 11,30 1,0 16,90 18,50 8,51 4, B-1 M 106 ML 5/8 15,875 9, ,67 0,95 13,8 14,40 19,50 0,90 10,16 5, B-1 M 17 ML 3/4 19,05 11, ,89 1,5 15,6 16,0,70 3,60 1,07 5, B-1 M 1611 ML 1 5,4 17, ,10,70 5,45 1,10 36,10 36,90 15,88 8, Duplex 06 B- D 67 ML 3/8 9,55 5, ,56 0,78 8,53 8,0 3,40 4,60 6,35 3,31 10, B- D 85 ML 1/ 1,70 7, ,00 1,35 11,30 1,0 30,80 3,40 8,51 4,45 13, B- D 106 ML 5/8 15,875 9, ,34 1,85 13,8 14,40 36,00 37,50 10,16 5,08 16, B- D 17 ML 3/4 19,05 11, ,78,50 15,6 16,40 4,10 43,00 1,07 5,7 19, B- D 1611 ML 1 5,40 17, ,1 5,40 9,45 1,10 68,00 68,80 15,85 8,8 31, B- D 01 ML 1 1/4 31,75 19, ,84 7,36 9,01 5,40 79,70 8,90 19,05 10,19 36, Triplex 08 B-3 TR 85 ML 1/ 1,70 7, ,50,00 11,30 1,0 44,70 46,30 8,51 4,45 13, B-3 TR 106 ML 5/8 15,875 9, ,0,80 13,8 14,40 5,50 54,00 10,16 5,08 16, B-3 TR 17 ML 3/4 19,05 11, ,68 3,80 15,6 16,40 61,50 6,50 1,07 5,7 19, B-3 TR 1611 ML 1 5,40 17, ,3 8,00 5,45 1,10 99,0 100,70 15,88 8,8 31, Simplex/duplex - MEGAlife roller chins with stright side pltes 10 B-1 M 106 ML-GL 5/8 15,875 9, ,67 0,95 13,8 13,90 19,50 0,90 10,16 5, B- D 106 ML-GL 5/8 15,875 9, ,34 1,85 13,8 13,90 36,00 37,50 10,16 5,08 16, B-1 M 17 ML-GL 3/4 19,05 11, ,89 1,30 15,6 16,10,70 3,60 1,07 5, B- D 17 ML-GL 3/4 19,05 11, ,78,50 15,6 16,10 4,10 43,00 1,07 5,7 19, * lso vilble in 10 m length (Art ), with stright side pltes 1) Differing dimensions for crnked links If crnked links re fitted, it should be noted tht the breking strength of the chin my be reduced by pproximtely 0%. g b p b d e b e d d 36
6 Telephone enquiries: MEGAlife I conveyor chins with stright ttchment pltes bsed on iwis roller chins complying with DIN 8187 DIN ISO no. Ref. no. iwis p ( ) Pitch ) p b d Simplex chins e 1 Duplex chins e Triplex chins e 3 g i l s M Threded insert m mx. Shpe B-1 L 85 ML 1) 1/ 1,7 13,0 19,0 4, 11,6 5,5 39,4 5,4 18,0 1,5 4 5, 10 B-1 M 106 ML 1) 5/8 15,875 16,3 4,3 5, 13,6 30,1 46,6 6,8 4,0 1,6 5 5,3 1 B-1 M 17 ML 1) 3/4 19,05 19,1 9,1 6, 15,9 35,3 54,7 7,4 8,0 1,8 5 5,5 16 B-1 M 1611 ML 1 5,4 4,6 36,6 8, 5,9 57,8 89,7 10,4 36, 3,0 6 8, Shpe n B-1 L 85 ML 1) 1/ 1,7 17,0 3,0 4, 11,6 5,5 39,4 5,4 1,7 3,6 1,5 4 5, 10 B-1 M 106 ML 1) 5/8 15,875 16,3 5,8 5, 13,6 30,1 46,6 7,5 15,8 31,0 1,6 5 5,3 1 B-1 M 17 ML 1) 3/4 19,05 18,3 9,0 6, 15,9 35,3 54,7 9,0 19,0 37, 1,8 5 5,5 MEGAlife chins 16 B-1 M 1611 ML 1 5,4 8,45 41,55 8, 5,9 57,8 89,7 10,35 5,4 47, 3,0 6 8, 1) lso for the corresponding duplex nd triplex chins ) Nominl pitch e 1 e e 3 Simplex chins Duplex chins Triplex chins STRAIGHT ATTACHMENTS The types illustrted re lso obtinble for connector nd outer links for finl ssembly nd repir. Fitting ttchments on one or both sides, on ech outer link or t greter spcing is possible. Other conveying chins nd threded inserts on request with threded insert with threded insert with threded insert 37
7 Product rnge Fx enquiries: MEGAlife I conveyor chins with bent ttchment pltes bsed on iwis roller chins complying with DIN 8187 Pitch 3) Simplex chins Duplex chins Triplex chins Threded insert DIN ISO no. Ref. no. iwis p ( ) p c d e 1 f 1 e f e 3 f 3 g h i l s M m mx. Shpe B-1 L 85 ML 1) 1/ 1,7 8,0 4, 7,6 39,6 41,5 53,5 55,4 67,4 5,4 14,0-18,1 1,5 4 5, 10 B-1 M 106 ML 1) 5/8 15,875 9,0 5, 33,6 49,6 50,1 66,1 66,6 8,6 6,8 18,0-4,0 1,6 5 5,3 1 B-1 M 17 ML 1) 3/4 19,05 10,0 6, 41,1 61,1 60,5 80,5 79,9 99,9 7,4,6-8,0 1,8 5 5,5 16 B-1 M 1611 ML 1 5,4 16,0 8, 53,9 77,9 85,8 109,8 117,7 141,7 10,4 6,0-36, 3,0 6 8, Shpe 03.1 nd B-1 L 85 ML 1) ) 1/ 1,7 9,5 4, 3,6 44,6 46,5 58,5 60,4 7,4 5,4 16,5 1,7 3,6 1,5 4 5, 10 B-1 M 106 ML 1) ) 5/8 15,875 11,0 5, 30,6 49,6 47,1 66,1 63,6 8,6 7,5 18,0 15,8 31,0 1,6 5 5,3 1 B-1 M 17 ML 1) ) 3/4 19,05 1,0 6, 35,5 56,9 54,9 76,3 74,3 95,7 9,0 0,5 19,0 37, 1,8 5 5,5 16 B-1 M 1611 ML 1 5,4 18,0 8, 57,7 83,9 89,6 115,8 11,5 147,8 10,4 9,0 5,4 47, 3,0 6 8, Conveyor chins D 1611 ML nd TR 1611 ML on request 1) Also for the corresponding duplex nd triplex chins ) Assembly of the bent ttchments lso possible inwrd over the chin except when fitted on both sides to D 85 ML, D 106 ML nd D 17 ML 3) Nominl pitch f 1 f f 3 e 1 h e h e 3 h Simples chins Duplex chins Triplex chins BENT ATTACHMENTS The types illustrted re lso obtinble for connector nd outer link for finl ssembly nd repir. Assembly of the bent ttchments with threded insert over the chin fcing inwrds is not possible. Fitting bent ttchments on one or both sides on ech outer link or t greter spcing is possible. Other conveying chins nd threded inserts on request with threded insert with threded insert 03.3 with threded insert 38
8 Telephone enquiries: MEGAlife I conveyor chins with extended pins bsed on iwis roller chins complying with DIN 8187 Pin type A, B, C 08 B-1 L 85 ML 1) 1/ 1,7 7,75 8,51 4,45 5,5 10,0 40,5 5,0 13,0 10 B-1 M 106 ML 1) 5/8 15,875 9,65 10,16 5,08 30,0 1,0 48,0 30,0 15,5 1 B-1 M 17 ML 1) 3/4 19,05 11,75 1,07 5,7 36,0 15,0 51,0 30,0 15,5 16 B-1 M 1611 ML 1 5,4 17,0 15,88 8,8 53,8 0,0 68,5 35,0 18,0 1) For multiple chins on request ) Nominl pitch Other pin lengths nd shpes on request EXTENDED PINS MEGAlife chins l1 L 1 l L Pitch ) Design A Design B nd C DIN ISO no. Ref. no. iwis 1) p ( ) p Inner width Roll dimeter Pin dimeter d L 1 I 1 L I I 3 The types illustrted re lso vilble s connecting links nd outer links for finl ssembly nd repir (C only s outer link). L d l3 A B d C d SPECIAL MEGAlife VERSIONS MEGAlife roller chins re lso vilble in the following specil versions: For exmple: MEGAlife trnsfer chins with high resistnt plstic support brckets or mintennce free power nd free conveyor chins. Contct us, our Sles Tem will be plesed to dvice you. 39
9 Product rnge Fx enquiries: MEGAlife II Roller chins Complying with DIN , ISO 606: 004 Breking strength F B Inner link Outer link 5 m Versions DIN ISO no. Ref. no. iwis Pitch p ( ) Pitch p iwis (N) med. Stndrd (N) min. Bering re f (cm ) Weight per m q (kg/m) min. b min. g mx. mx. 1) mx. 1) Roller mx. Pin d mx. Trnsverse pitch e Article No. Simplex 06 B-1 G 67 ML- * 3/8 9, ,8 0,41 5,7 8,53 8,0 1,90 14,10 6,35 3, B-1 L 85 ML- 1/ 1, ,50 0,70 7,75 11,30 1,0 16,90 18,50 8,51 4, B-1 M 106 ML- 5/8 15, ,67 0,95 9,65 13,8 14,40 19,50 0,90 10,16 5, B-1 M 17 ML- 3/4 19, ,89 1,5 11,75 15,6 16,40,70 3,60 1,07 5, B-1 M 1611 ML- 1 5, ,10,70 17,0 5,45 1,10 36,10 36,90 15,88 8, B-1 M 01 ML- 1 5, ,84 7,36 19,56 9,10 6,60 77,00 79,70 19,05 10,17 36, Duplex 06 B- D 67 ML- 3/8 9, ,56 0,78 5,7 8,53 8,0 3,40 4,60 6,35 3,31 10, B- D 85 ML- 1/ 1, ,00 1,35 7,75 11,30 1,0 30,80 3,40 8,51 4,45 13, B- D 106 ML- 5/8 15, ,34 1,85 9,65 13,8 14,40 36,00 37,50 10,16 5,08 16, B- D 17 ML- 3/4 19, ,78,50 11,75 15,6 16,40 4,10 43,00 1,07 5,7 19, Triplex ML- roller chins on request Simplex ANSI roller chins, complying with DIN , Americn stndrd, ISO 606: A-1 ANSI 60 M 18 AML- 3/4 19, ,06 1,47 1,70 17,75 18,00 5,30 6,70 11,91 5, A-1 ANSI 80 M 1610 AML- 3/4 19, ,79,57 15,88,40,80 3,00 33,90 15,88 7, ML- conveyor chins on request 1) Differing dimensions for crnked links. If crnked links re fitted, it should be noted tht the breking strength of the chin my be reduced by pproximtely 0%. g b p b d e b e d d INDIVIDUAL COMPONENTS AND CONNECTING LINKS 40 Nr. Inner link Stndrd designtion B Nr. 3 Connecting link with spring clip Stndrd designtion E Nr. 7 Double crnked link Stndrd designtion C Nr. 8 Outer link Stndrd designtion A
10 Telephone enquiries: MEGAlife conveyor chins Exmples of specil chin designs MEGAlife conveyor chin with stright ttchment pltes MEGAlife conveyor chin with extendend pins MEGAlife chins MEGAlife conveyor chin with bent ttchment pltes MEGAlife conveyor chin with specil ttchment pltes 41
Roller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
Cable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
CCS-810 KIT SERIES INSTRUCTION SHEET
(COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED
JUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
FINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
Murtfeldt Internet Chain Tensioners for Roller Chains to DIN8187
Murtfeldt Internet www.murtfeldt.de Chin Tensioners for Roller Chins to DIN8187 185 186 Murtfeldt E-mil info@murtfeldt.de Murtfeldt Fxline +49-231- 25 10 21 Chin Tensioners with Arc Segment Profile for
e lif GA ME MEGAlife 31
intennce free roller n conveyor chin cn be lie in ll re where ot intlltion lubriction i not t ll or only rtly oible. Thi i the ce in clen n ry urrouning or in liction with ifficult lubriction ge. intennce
CCD-493 KIT SERIES INSTRUCTION SHEET
(COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED
Free Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
Brazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
Spark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
TECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS
TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS INTERNAL CLEARANCE - TYPES AND NORMS Internl clernce is the distnce which the two rings of non-instlled bering
4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
Quality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x
Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,
Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10
@ ECV Technicl Dt High Lift Pllet Truck ECV 10 C ECV 10i C ECV 10 Lifting Mde Esy This specifiction sheet to VDI Guideline 198, only provides the technicl vlues for the stndrd truck. Different tyres, other
CC-410 KIT SERIES INSTRUCTION SHEET
(COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
Fire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance
FKA-EU/DE/BE/en Fire dmpers Type FKA-EU tested to EN 1366-2 ccording to Declrtion of Performnce DoP / FKA-EU / DE / 2013 / 001 The rt of hndling ir Contents Description Description 2 Correct use 3 Construction
tel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves
ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets
ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd
POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
HAZET Range of Pullers / Extractors
HAZET Rnge of 2-Arm Pullers Forged qulity 3-Arm Pullers Prcticl nd proven tools Hydrulic Pullers New innovtive rnge of pullers ll ering Extrctors For industry, utomotive sector, commercil see Specilty
Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
Chain conveyors with endless chains with feed dogs in closed troughs are suitable for the transport of bulky material.
C o n v e y ing PPliCtiON Chin conveyors with endless chins with feed dogs in closed troughs re suitble for the trnsport of bulky mteril. This version of Vecopln-chin conveyors trnsports the mteril in
u-tec UT Our change system, that makes EVERYTHING possible
u-tec UT Our chnge system, tht mkes EVERYTHING possible Terms nd conditions: You will find them on our website www.heimtec.com Home/Imprint/Terms nd Conditions This ctlogue, including ll its prts, is protected
4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR
Innovtion in Technology for Aircrft Mintennce Equipment, Airline Support through Engineering & Trining Advnced Composite & Metllic Structures Cge Code - NATO Code : F7856 - Eur VAT- ID: FR90 328961073
HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version
EAT-SINK ALUMINIUM ENCLOSURE Y SERIES NEW size dded nd selectble in 5 sizes. Excellent Cooling Performnce The wved surfce on the fins increses cooling performnce. Wved surfce Added new length version New
SSAB Water mains PIPES AND FITTINGS
SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted
RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
Data Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
BIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. Technical data Protection class IP40. CAD data is downloadable from our website.
MSR SERIES Technicl dt Protection clss IP40 MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our website. Avilble rnge W-30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce for sophisticted
drylin stainless steel Lubrication free Temperature resistant up to +250 C Corrosion resistant Chemical resistant Standard parts with quick delivery
drylin ubriction free emperture resistnt up to +0 C Corrosion resistnt Cemicl resistnt Stnrd prts wit quick delivery 67 drylin dvntges drylin R plin berings Product rnge Closed pter mde from 1.45 drylin
HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version
EAT-SINK ALUMINIUM ENCLOSURE Y SERIES NE size dded nd selectble in 5 sizes. Excellent Cooling Performnce The wved surfce on the fins increses cooling performnce. ved surfce Added new length version New
JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. CAD data is downloadable from our web. Available in 16 sizes. Screws are not appeared on the surface.
MSR SERIES MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our web. Avilble rnge -30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce. Esy to punching or hole milling on front nd rer
Electrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
drylin Stainless Steel Lubricant free Temperature resistant up to +250 C Corrosion resistant Chemical resistant Standard parts with quick delivery
drylin Stinless Steel ubricnt free emperture resistnt up to +0 C Corrosion resistnt Cemicl resistnt Stnrd prts wit quick delivery 67 drylin Stinless Steel dvntges drylin R iner Plin ering Product Rnge
The quick jaw change chuck KNCS-NB / KNCS-NBX can use all existing top jaws KNCS-NB
Fst chngeover, fst pybck: The quick jw chnge chuck KNCS-NB / cn use ll existing top jws KNCS-NB/: cn use existing jws Miniml set-up times Jw chnge in less thn 1 minute KNCS -NB High repetbility when chnging
Solenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
BERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve
Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,
January per. White. Pap. systems. Abstract. look and. Page 1/6
Jnury 2019 White Pp per Pros nd cons of n upgrde for chrger systems Abstrct Th pper outlines the dvntges nd ddvntges of n upgrde with retrofitting (lter referred to s n upgrde ) of bttery chrgers. Such
DC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
Lincoln Under-cabinet Light Installation Instructions
Lincoln Under-cbinet Light Instlltion Instructions #1500178 Rev A Congrtultions on your new Lincoln Under-cbinet Light! Whether purchsed for its significnt energy svings nd efficiency, lower lifetime costs,
4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
Metering pumps LK series
PDF-A 00-07 Metering pumps LK series Applicble to the mny diverse needs of chemicl Accurte trnsfer of strong cid Proportionl feeding of dditive Automtic dilution of chemicl liquid Chemicl liquid concentrtion
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
The original quick jaw change power chuck KNCS -NB KNCS -NBX >> ALL EXISTING TOP JAWS CAN USED.
Fst chngeover, fst pybck: The originl quick jw chnge power chuck KC - KC -X ARE TROU OE EXTRA ARE TROU OE >> A EXITI TOP JAW CA UED. Miniml set-up times Jw chnge in less thn 1 minute igh repetbility when
Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
REPLACEMENT. 4. REMOVE WINDSHIELD MOULDING OUTSIDE (a) Using a knife, cut off the moulding, as shown in the illustration.
7012 REPLCEMENT The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion re included. 1. REMOVE ROOF HEDLINING SSY (See pge
RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
Hose Claw Couplings SKG 13-DR SKG 19-DR SKG 25-DR
Swivelling, IN 89 High qulity couplings, hed of mlleble iron, thred connections nd hose stem of turned steel with specil profile, zinc-plted nd yellow pssivted (free of chrome VI) with sfety notches 30
Plug-in connectors for power electronics
Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 480 PHOENIX CONTACT Plug-in
Directional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
STEEL WIRE & ROPE FITTINGS
6 Contents Bever mintins wie rnge of wire rope n fittings tht cn be use for towing n lifting, pplictions. Furthermore Bever hs the bility to offer mnufcture slings me to orer. With Bever s ISO Qulity n
TECHNICAL DOCUMENTATION CRANE SYSTEM GISKB I GISKB II
TECHNICAL DOCUMENTATION CRANE SYSTEM GISKB I GISKB II 12.17 Trnsltion 9309.9710.1.docx Tle of contents 0 Generl instructions... 4 0.1 Explntion of signs... 4 1 Overview... 5 1.1 Overview suspensions...
FRONT SIDE FIX WINDOW
WINSHIEL/WINOWGLSS/MIRROR FRONT SIE FIX WINOW REPLEMENT FRONT SIE FIX WINOW The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion
Decor Radiators Baseboard
Decor Rditors Bsebord Pedestl 11 (with fins) Avilble in outputs from 1,561 to 10,282 Btu/hr; 2, nd 4 tubes high. 28 (igh Output, with fins) Avilble in outputs from 5,05 to 19,552 Btu/hr; 2 nd 4 tubes high.
Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
41set. redhen MODUL GABION SYSTEM. 41 means:
1 MODUL GABION SYSTEM redhen 41set 41 mens: module system which llows you to build vrious forms of gbion rchitecture using just few components 4 pcs. d41x68 8 pcs. n41 "while you wit order reliztion with
Accessories. Inlet nozzles 550. Guard grilles 553. Lead connections, capacitors 558. Terminal boxes, air filters 562
Accessories Generl informtion Inlet nozzles 550 Gurd grilles 553 Led connections, cpcitors 558 Terminl boxes, ir filters 562 Speed setting, motor protection switch, third-prty ccessories 564 Technology
WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
LTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption
LTV 29-2 nd 39-2 ngle nutrunners Higher speed, lower energy consumption Thumbs up for the LTV 9 series in customer trils LTV 29 tril rouses Ford s interest The Ford plnt in Cologne, Germny, with cpcity
DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
DRIVE SHAFTS INDEX
DRIVE SHAFTS 8 70237 Tble of Contents Pge Specifictions............................... 8-1 Torque Specifictions..................... 8-1 Specil Tools............................ 8-1 Lubricnts, Selnts,
WINDSHIELD / WINDOWGLASS
WINSHIEL / WINOWGLSS QURTER WINOW GLSS QURTER WINOW GLSS OY WINSHIEL / WINOWGLSS OMPONENTS 97 RER SIE SETK FRME LH RER SIE SETK FRME RH RER SET USHION SSEMLY RER OOR OPENING TRIM WETHERSTRIP LH TONNEU
UNIVERSAL ALUMINIUM CASE
UC SERIES UNIVERSAL ALUMINIUM CASE 3 2 4 Simple structure nd tough cse with extruded luminium covers. 36 sizes nd 3 different colors for totl of 108 different combintions re vilble. 2 or 3 grooves vilble
DryLin W Modular Guide Systems Product Range
! !!! Dryin W Dryin W Modulr Guide Systems Product Rnge Single ril nd ousing bering, round Order key complete pge 785 Ril Bering block K1 C3 G1 A3 WJ200UM-01-.. d d1 C6 C4 C5 di 1 WS-.. Illustrted rils
GUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
Thermocouple Thermometer omnigrad S- TC 88
Technicl informtion TI 279T/02/en 60022508 Thermocouple Thermometer omnigrd S- TC 88 Thermocouple ssembly with extension neck Replceble insert PCP (4...20 ma), HART or PROFIBUS-PA electronics The TC 88
Press control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
World s Leading Supplier of Fastener Inspection Equipment
World s Leding Supplier of Fstener Inspection Equipment clibrtion Price list Qulity Service for your Qulity Deprtment Plese include the following with your clibrtion order: 1 PO Number 1 Clibrtion Cycle
Directional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation
/, / nd / directionl set vlve with mechnicl, mnul or fluidic opertion RE 0/10.06 /1 ype M-.S.. Sizes 6 nd 10 Component series X Mximum operting pressure 0/ r Mximum flow 0 l/min H701+70+70 le of contents
RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX SI R1
d03161 RECOMMENDED AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX ENGINE TYPE 912 AND 914 (SERIES) Repeting symbols: Plese, py ttention to the following symbols throughout
TA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
HEKO products and services
HEKO products nd services Elements for ucket elevtors Components for chin conveyors Chins nd ccessories for rotry kilns Clcultions, dvice nd servicing of conveyors HEKO Ketten GmH Postfch 1262 D-58732
UBAN Series. Direct operated pressure reducing valve. Suitable for: Air & process gases. Liquids. Steam. Markets: Oil & gas. Blanketing systems
UBAN Series Direct operted pressure reducing vlve Suitble for: Air & process gses Liquids Stem Mrkets: Oil & gs Blnketing systems Generl industry Power CC0032E - Rev. 1 14/01/2010 UB REGULATORS UBAN Series:
Screwdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers
Screwdrivers TBI Screwdrivers R Screwdrivers NI Screwdrivers VE Screwdrivers VE TBI Screwdrivers Bits Impct screwdrivers Other ccessories Ergonomiclly designed hndles The superior qulity of mterils used
Directional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4
Directionl Vlve NG 04 WL4.04 Instlltion dimensions ISO 4401/ DIN 4340 4 Functionl Description he directionl control vlves WL 4/04 consists of housing (1), control spool (5) with two centering springs (4)