Accessories. Inlet nozzles 550. Guard grilles 553. Lead connections, capacitors 558. Terminal boxes, air filters 562
|
|
|
- Lionel Wiggins
- 5 years ago
- Views:
Transcription
1 Accessories Generl informtion Inlet nozzles 550 Gurd grilles 553 Led connections, cpcitors 558 Terminl boxes, ir filters 562 Speed setting, motor protection switch, third-prty ccessories 564 Technology Accessories EC-SYSTEMS for clen rooms 549 Contcts
2 Inlet nozzles o Vers. Vers. 2 Vers. 3 Mteril: Glvnised sheet steel Øk r 4x r2 r ,3 Øs 242 R42,8 5 Øu Øm Øn q t 6x60 5,5 7 6x60 Inlet nozzles for curved centrifugl fns Size () Vers. k m n o q r r 2 r 3 s t u (P) x (P) x / 90 (P) x (P) (P) x (P/S) x / 280 (S) x (P) (A) x (2) (A) x / 355 (P) x (A) x (2) (A) x (A) x (A) x (A) x (A) x (A) x (A) x (A) x () size with key for impeller mteril: (P) = plstic, (S) = sheet steel, (A) = luminium (2) short inlet nozzle 550
3 Inlet nozzles with pressure-mesuring point for ir flow mesurement Generl informtion D 0,5xD Air flow mesurement: The differentil pressure pproch compres the sttic pressure before the inlet nozzle with the sttic pressure inside the inlet nozzle. Air flow cn be clculted on the bsis of the differentil pressure (difference in pressure of the sttic pressures) in keeping with the following eqution: V = k. p W V in [m 3 /h] nd p W in [P] If constnt ir flow control is used, then the nozzle pressure hs to be kept constnt: p W = V 2 :k 2 k tkes into ccount the specific nozzle chrcteristics. or 4 pressure mesuring points re spced long the circumference of the inlet nozzle. Connection on the customer side is ccomplished vi premounted T tube connector. This tube connector is suited for pneumtic hoses with n internl dimeter of 4 mm. Inlet nozzles with mesuring device to determine ir flow for curved centrifugl fns with nozzle with 4 nozzles (Piezometer ring) Size k-vlue For dditionl informtion, refer to p Technology Accessories for clen rooms EC-SYSTEMS 55 Contcts
4 Inlet nozzles Vers. Vers. 2 Vers. 3 Mteril: Glvnised sheet steel 06 6x Øb Øu Ø f r c c 4, (2) 4x90 92 d e e 6x60 5,5 Inlet nozzles for curved centrifugl fns Size Vers. b c d e f r u / 085 () () / / (3) (3) (3) (3) (3) (3) (2) x x x x x x x x x x x x x x () 3 drilled holes stggered by 20 (2) only for (3) 6 drilled holes stggered by
5 Gurd grille Vers. Generl informtion 4x90 Vers. 2 Mteril: Steel wire, plstic coted, silver-metllic gloss Ød e b 3x20 Ød e b Gurd grille for curved centrifugl fns (ccording to EN 294) Size Vers. b d e Technology Accessories EC-SYSTEMS for clen rooms 553 Contcts
6 Gurd grille Mteril: Welded grille mde of glvnised steel, frme mde of tinned sheet iron 0.4 mm thick b c 4,5 Ø00 (4) Size 60 Gurd grilles for centrifugl blowers with single inlet Size b c / 085 (3) / (4) (5) (3) 3 drilled holes stggered by 20 (5) not suitble for G2E80-EH03-0 c 2 Mteril: Steel wire mx. e d b Gurd grilles for centrifugl blowers with single inlet Size b c d e / / (6) Coting plstic coted, silver-metllic gloss plstic coted, silver-metllic gloss glvnised, chromtised in blue glvnised, chromtised in blue phosphted, plstic coted in RAL no (6) only suitble for G2E80-EH
7 Gurd grille Generl informtion b mx. 8 Mteril: Steel wire 4,3 c 3x20 2 Gurd grilles for centrifugl blowers with dul inlet Size b c () (2) / () for D2E097-CH (2) for D2E097-B* Coting phosphted, plstic coted in RAL no phosphted, plstic coted in RAL no phosphted, plstic coted in RAL no phosphted, plstic coted in RAL no plstic coted, silver-metllic gloss for clen rooms 3x20 b mx. 8 Mteril: Phosphted steel wire, plstic coted, silver-metllic gloss e c d EC-SYSTEMS Gurd grilles for centrifugl blowers with dul inlet (versions with EW motor) Size b c d e / Accessories Technology 555 Contcts
8 Gurd grille 33 3 Mteril: PA plstic 6.6 GV25 V0, blck Specil feture: Tringulr, rised contour Suitble for: D2E40-HR; D2E46-KA; D2E46-KB; D2E46-HR; D2E46-HS; D2E46-HT; D4E46-LV 3 Gurd grilles for blowers with dul inlet with plstic housing (cble exit side of blower) Mteril: PA plstic 6.6 GV25 V0, blck Specil feture: Outer two rings re closed Suitble for: D2E40-HR; D2E46-KA; D2E46-KB; D2E46-HR; D2E46-HS; D2E46-HT; D4E46-LV; K4E46-AB 3 Gurd grilles for blowers with dul inlet with plstic housing (side of blower opposite cble exit)
9 Gurd grille Generl informtion 6x60 Mteril: Phosphted steel wire, plstic coted in RAL no. 9005, blck mx. 8 b c Gurd grilles (e.g. for xil fns) Size b c Technology Accessories EC-SYSTEMS for clen rooms 557 Contcts
10 Connection leds AMP Universl Mte-N-Lok, suitble for: Connector shell AMP Plug pin AMP Jcketed cble, internl leds H03VV-F6G0.5 blck 6 85 Brss led tips Suitble for: D2E40-HR; D2E46-KA; D2E46-KB; D2E46-HR; D2E46-HS; D2E46-HT; D2E60-FI; D2E60-FK Plug ssignment: = Step (white) 2 = Step 2 (red) 3 = Step 3 (grey) 4 = Step 4 (blck) 5 = N (blue) 6 = PE (green/yellow) Led connections for centrifugl blowers AMP Universl Mte-N-Lok suitble for: Connector shell AMP Plug pin AMP Jcketed cble, internl leds H03VV-F6G0.5 blck 6 Brss led tips Suitble for: D4E46-LV; K4E46-AB Plug ssignment: = Step (white) 2 = Step 2 (red) 3 = Step 3 (grey) 4 = Step 4 (ornge) 5 = Step 5 (blck) 8 = N (blue) 9 = PE (green/ yellow) Led connections for centrifugl blowers
11 Connection leds Generl informtion AMP Mte-N-Lok femle connector Core-end sleeves Plug ssignment: = N (blck 2) 2 = L (blck ) 3 = PE (green / yellow) Line led for EC centrifugl fns (clen room technology) Molex Mini-Fit femle connector Core-end sleeves Plug ssignment: = RSB (white) 2 = RSA (yellow) 3 = +5 V (red) 4 = 0 V (blue) Control line for EC centrifugl fns (clen room technology) Technology Accessories for clen rooms EC-SYSTEMS 559 Contcts
12 Cpcitors Ø M8 0 b c ±0 7 ± Mteril: Housing mde of Thermoplst Connection led: Multi-led PVC cble 0.5 mm 2 with brss led tips Approvl: VDE ccording to DIN EN (VDE 0560/8) Clculted life time: 400 V; -25 to +85 C; 30,000 hrs; clss A 450 V; -25 to +85 C; 0,000 hrs; clss B MKP motor cpcitors (without fuse) Cpcity b (mx.) c µf µf µf µf µf µf µf µf µf µf µf µf µf µf µf µf
13 Cpcitors Generl informtion Ø M8 0 b 7± c Ø + 3,5 Mteril: Plstic cp, luminium cup Designtion: FPU or P2 ccording to IEC 252 (non-flmmble, non-explosive, circuit-breking) Approvl: VDE ccording to DIN EN (VDE 0560/8) Clculted life time: 420 V; -25 to +85 C; 30,000 hrs; clss A 470 V; -25 to +85 C; 0,000 hrs; clss B 500 V; -25 to +85 C; 3,000 hrs; clss C MKP motor cpcitors FPU or P2 (with fuse) Cpcity b (mx.) c (mx.) µf µf µf µf µf µf µf µf µf µf µf µf µf µf µf µf for clen rooms mx. 9 mm Pull-off protector: The housing expnds by mx. 9 mm. The protector responds to overlod by the generted excess pressure snpping off the internl led in predetermined breking point. Mounting: c is the overll dimension of the cpcitor which hs to be tken into ccount when mounting the prt. The cpcitor design, however, depends on the mnufcturer. The expnsion (9 mm) is either dded to dimension b, or it is lredy integrted in the cpcitor. Technology EC-SYSTEMS Accessories 56 Contcts
14 Terminl box 9,5 94 Ø 29 b 56 2 = = Mteril: ABS 3 Description: Two-piece terminl box for AC motors of size 068 or 074, terminl strip with 4- or 7-pole. Suitble for instlltion of cpcitor with 0 µf mx. Type of protection: IP 54 c ,5 Terminl box AC motor b c (4 poles) (7 poles) (4 poles) 2x (7 poles) 2x
15 Air filter b e c Mteril: Steel wire / sheet steel, plstic coted in RAL no. 9005, blck Filter: Viledon filter type R: PSB / 29 OS (ccording to DIN 2485) Seprtion cpcity: < 86 % Efficiency: < 20 % Dust binding cpcity: 650 g/m 2 d Air filters for centrifugl blowers (with die-cst luminium housing) Size / 20 b c d e Spre filter / 46 / Technology Accessories EC-SYSTEMS Generl informtion for clen rooms 563 Contcts
16 Speed setting, 3-phse (with 5 steps) for wll ssembly Technicl fetures: Input for TOP Voltge steps: 3~ 400 / 280 / 230 / 80 / 40 VAC Type of protection: IP 20 (with verticl instlltion) Nominl dt Nominl voltge Frequency Current drw Mss Type VAC Hz A kg TCD 020-AA0-05 3~ / TCD 040-AA0-05 3~ / TCD 070-AA0-05 3~ / xØ5,
17 Speed setting, single-phse (with 5 steps) for wll ssembly Generl informtion Technicl fetures: Input for TOP Voltge steps: ~ 230 / 60 / 45 / 30 / 05 VAC Type of protection: IP 40 Nominl dt Nominl voltge Frequency Current drw Mss Type VAC Hz A kg TCE 02-AA0-05 ~ / TCE 040-AA0-05 ~ / TCE 075-AA0-05 ~ / EC-SYSTEMS 86 4xØ7 for clen rooms Accessories 200 Technology 565 Contcts
18 Motor protection switch, 3-phse for ssembly inside cbinet Technicl fetures: Input for TOP Nominl dt Nominl voltge Frequency Current drw Mss Type TPD 250-AB0-0 TPD 250-AB0-02 TPD 250-AB0-03 VAC Hz A kg 3~ / ~ / ~ / Auxiliry contctor without uxiliry contctor with brek contct with mke contct Electr. connection: ,5 66,5 566
19 Motor protection switch, single-phse for ssembly inside cbinet Generl informtion Technicl fetures: Input for TOP Nominl dt Nominl voltge Frequency Current drw Mss Type VAC Hz A kg Auxiliry contctor TPE 00-AB0-0 TPE 00-AB0-02 TPE 00-AB0-03 3~ / ~ / ~ / without uxiliry contctor with brek contct with mke contct 52,5 Electr. connection: Technology Accessories for clen rooms EC-SYSTEMS 567 Contcts
20 Motor-protection switch, single phse nd three-phse for wll ssembly Technicl fetures: Input for TOP Type of protection: IP 55 Nominl dt Nominl voltge Frequency Current drw Mss Type TPD 250-AA0-0 TPD 250-AA0-02 TPD 250-AA0-03 TPE 00-AA0-0 TPE 00-AA0-02 TPE 00-AA0-03 VAC Hz A kg 3~ / ~ / ~ / ~ / ~ / ~ / Auxiliry contctor without uxiliry contctor with brek contct with mke contct without uxiliry contctor with brek contct with mke contct Electr. connection, three-phse: 4 Electr. connection, single-phse:
21 Str-delt switch / repir switch Third-prty ccessories from Möller Electric GmbH Generl informtion More informtion: for wll instlltion Str-delt switch (vilble from Möller Electric GmbH) Designtion Instlltion T /I Wll instlltion T /E Cbinet instlltion More informtion: for wll instlltion Repir switch, lockble (vilble from Möller Electric GmbH) Designtion Instlltion T /I/SVB-SW Wll instlltion T /EA/SVB-SW Cbinet instlltion Technology Accessories for clen rooms EC-SYSTEMS 569 Contcts
22 570
Accessories. Inlet rings 306. Guard grilles 309. Lead connections, capacitors 313. Terminal boxes, air filters 316
Inlet rings 306 Generl informtion Gurd grilles 309 Led onnetions, pitors 33 Terminl boxes, ir filters 36 Motor protetion swith, speed setting, str-delt swith, repir swith 37 Contts Tehnology Aessories
Accessories. Guard grilles, streamers 362. Wall rings 372. Connection lines 374. Accessories for Q-motors and energy-saving motors (ESM) 374
Aessories Generl informtion Gurd grilles, stremers 362 Wll rings 372 fns Connetion lines 374 Aessories for Q-motors nd energy-sving motors (ESM) 374 Terminl boxes, pitors, speed setting devies, motor protetion
Accessories. Guard grille, streamers 238. Wall rings 248. Connection leads 250. Accessories for ESM and Q-motor 250
Generl informtion Gurd grille, stremers 238 Wll rings 248 Connetion leds 250 Aessories for nd 250 Terminl ox, motor protetion swith, speed setting, str-delt swith, repir swith, pitors 256 237 Contts Tehnology
JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
TA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
JUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")
Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533
Incremental encoders Solid shaft with square flange pulses per revolution
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil
Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
Amendment Sheet. Code : ADB-FR Date : Superceded : nil REFRIGERANT CIRCUIT DIAGRAM
mendment Sheet Code : DB-FR-007-0001 Date : 18-0-008 Superceded : nil REFRIGERNT CIRCUIT DIGRM GENERL DT HETPUMP (R) NOMINL COOLING CPCITY NOMINL HETING CPCITY NOMINL TOTL INPUT POER (COOLING) NOMINL TOTL
Two-Position Electric Duplex Room Thermostats
TC-xx Series, TC-xx Series, TF- Series Two-Position Electric Duplex Room Thermostts These thermostts provide on-off control of heting/cooling systems. Fetures: Seprte units for C nd F. All units except
4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
BIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
Data Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class" Special features. Dimensions (in mm) B en
P3IC / P3ICP Absolute pressure trnsducer Industril Clss" Dtenbltt Specil fetures For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions Nominl (rted) pressure 10 br to 3000 br Strin
RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
Proportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
MixMate series the high-capacity connectors
MixMte series the high-cpcity connectors RockStr inserts MixMte series the high-cpcity connectors MixMte integrtes xil screw contcts nd TOP connection technology in one plug-in connector. The compct design
The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)
elivery ddress: Mckenrodtstrße 14 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Fx: +49 661 6003-607 Emil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: +44 1279 62 50 29 Emil: sles@jumo.co.uk
Product range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
SINEAX C 402 Alarm unit
for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely
RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH
TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH This rnge hs been used to monitor very smll chnges in vcuums nd hs been specified extensively for offshore
DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class. Special features. Dimensions (in mm) B en 1
P3IC / P3ICP Absolute pressure trnsducer Industril Clss Dtenbltt Specil fetures - For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions - Nominl (rted) pressure 10 br to 3000 br -
SSAB Water mains PIPES AND FITTINGS
SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted
RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
Spring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
Section 6. Transformers. Table of Contents. General Purpose, Dry Type, 600 Volts and Below. Industrial Control. Instrument, 600 Volt Class
Tble of ontents Section Trnsformers Generl Purpose, Dry Type, 00 Volts nd elow Three-Phse, Energy Efficient Trnsformers -2 Single-Phse, Energy Efficient Trnsformers -2 K-Rted Trnsformers -3 Drive Isoltion
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
Hand-operated Actuator Type 3273
Hnd-operted Actutor Type 3273 Appliction Hnd-operted ctutor for ttchment to vlves, especilly for Series 240, 250 nd 260 Control Vlves. Rted trvels of 5 nd 30 mm. Nominl thrusts up to 32 kn The Type 3273
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
GUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
JUMO dtrans T06 Multifunctional Four-Wire Transmitter in Mounting Rail Case in Accordance with DIN EN and EN ISO 13849
Dt sheet 777 Pge / JUMO dtrans T6 Multifunctionl Four-Wire Trnsmitter in Mounting Ril Cse in Accordnce with DIN EN 658 nd EN ISO 3849 Brief description The trnsmitter cquires the temperture through n RTD
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
PERSEUS ULTRA LOW PRESSURE
PERSEUS ULTRA LOW PRESSURE PF60 ATEX & IECEx Exd, Exi & INDUSTRIAL ULTRA LOW PRESSURE SWITCH This rnge of switches fetures robust high qulity housing with 1 or 2 seled SPDT microswitches nd hs been designed
DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets
ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd
Pneumatic. PVL Inline Valves. Catalogue No.
Pneumtic PVL Inline Vlves Ctlogue No. GB-c PVL High flow, compct size Push-in threded connection DIN ril block mounting Light weight construction Inline stnd lone stckble version Avilble in 2 x 3/2-5/3
CS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
Solenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
Fire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance
FKA-EU/DE/BE/en Fire dmpers Type FKA-EU tested to EN 1366-2 ccording to Declrtion of Performnce DoP / FKA-EU / DE / 2013 / 001 The rt of hndling ir Contents Description Description 2 Correct use 3 Construction
330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
TopWing - Air heater TLHD
TopWing - Air heter TLHD 1 TopWing Air heter TLHD The TLHD unit is extremely quiet nd in comintion with the continuous speed control, the TopWing concentrtes on the essentil while reducing noise. The ir
2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version
EAT-SINK ALUMINIUM ENCLOSURE Y SERIES NE size dded nd selectble in 5 sizes. Excellent Cooling Performnce The wved surfce on the fins increses cooling performnce. ved surfce Added new length version New
HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version
EAT-SINK ALUMINIUM ENCLOSURE Y SERIES NEW size dded nd selectble in 5 sizes. Excellent Cooling Performnce The wved surfce on the fins increses cooling performnce. Wved surfce Added new length version New
SHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
Solenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
Press control block PSB Type approved according to DIN EN 693
Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording
Plug-in connectors for power electronics
Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 480 PHOENIX CONTACT Plug-in
switch disconnectors switch disconnectors fuses
SWITCHGER R switch disconnectors RB switch disconnectors fuses R switch disconnectors and RB switch disconnectors fuses are designed for distribution of electricity, making and breaking currents and protection
LTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption
LTV 29-2 nd 39-2 ngle nutrunners Higher speed, lower energy consumption Thumbs up for the LTV 9 series in customer trils LTV 29 tril rouses Ford s interest The Ford plnt in Cologne, Germny, with cpcity
* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
Energy Recovery Ventilator
PEG1610044CE Version:1601 Service Mnul Energy Recovery Ventiltor (North meric Mrket) WRNING This service informtion is designed for experienced repir technicins only nd is not designed for use by the generl
Cable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
drylin stainless steel Lubrication free Temperature resistant up to +250 C Corrosion resistant Chemical resistant Standard parts with quick delivery
drylin ubriction free emperture resistnt up to +0 C Corrosion resistnt Cemicl resistnt Stnrd prts wit quick delivery 67 drylin dvntges drylin R plin berings Product rnge Closed pter mde from 1.45 drylin
MINI COMBICON Double-Level Headers for Through Hole Reflow Processes, MCDN 1,5/ 3.5 mm Pitch
MINI COMBICON Double-Level Heders for Through Hole Reflow Processes, MCDN 1,5/ The MCDN(V) 1,5/ double-level heders feture minimum spce requirement on the PCB, nd t the sme time, high contct density. It
BERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve
Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,
Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
Control stations and enclosures Control station enclosures : insulated, metal and flush mounting
Chrcteristics Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil
In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.
In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V
Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
Murtfeldt Internet Chain Tensioners for Roller Chains to DIN8187
Murtfeldt Internet www.murtfeldt.de Chin Tensioners for Roller Chins to DIN8187 185 186 Murtfeldt E-mil info@murtfeldt.de Murtfeldt Fxline +49-231- 25 10 21 Chin Tensioners with Arc Segment Profile for
Atlas Copco Drills. Higher level of performance
Atls Copco Higher level of performnce Pistol Grip LBB, COMBI Regrdless of which model you choose, you'll get product with superior ergonomics nd productivity. Quiet Very low noise level. Comfortble grip
Teile und Zubehör- Einbauanleitung
Teile und Zubehör- Einbunleitung F 46 052 EVA BMW Prts nd Accessories Instlltion Instruction Sun blind, electric BMW 3 Series Sloon (E46/4), BMW 3 Series Coupé (E46/2) Best.-Nr. 0 29 0 000 58 I/99 Printed
Quality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x
Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,
* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
DC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
Control stations and enclosures
Chrcteristics Control sttions nd enclosures Control sttion enclosures: insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil version:
UNIVERSAL ALUMINIUM CASE
UC SERIES UNIVERSAL ALUMINIUM CASE 3 2 4 Simple structure nd tough cse with extruded luminium covers. 36 sizes nd 3 different colors for totl of 108 different combintions re vilble. 2 or 3 grooves vilble
2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
INTRODUCTION CP 06 F C - A 4 L - F GENERAL DESCRIPTION DESIGN PARAMETER DUCTED CONCEALED WITH PLENUM. F - c/w Filter
INTRODUCTION GENERL DESCRIPTION Ducted Direct Drive Fan Coil ir Conditioners are designed to fulfill the air conditioning requirements of today s living. These requirements include dependable trouble-free
ALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800
Fcts nd figures ALLROUNDER 12 T Tble dimeter: 12 mm Clmping force: 8, 1, 16, 2 kn (cc. to EUROMAP): 7, 1, 17, 29, 4, 8 www.rburg.com 12 T Mchine dimensions up to 1 kn 385 1) 323 2) 3545 3) 366 4) 391 5)
JUMO dtrans T06 Multifunctional Four-Wire Transmitter in Mounting Rail Case in Accordance with DIN EN and EN ISO 13849
Dt sheet 777 Pge / JUMO dtrans T6 Multifunctionl Four-Wire Trnsmitter in Mounting Ril Cse in Accordnce with DIN EN 658 nd EN ISO 3849 Brief description The trnsmitter cquires the temperture through n RTD
HA series the slim connectors
HA series the slim connectors RockStr inserts HA series the slim connectors When spce is tight, the smll nd nrrow HA series comes into its own. Technicl dt Stndrds / pprovls Stndrds DIN EN 61984 Approvls
CATALYST GROUP) B"sic Mech"nic"l Engineering
CATALYST GROUP) B"sic Mech"nic"l Engineering 1. In " split ph"se motor, the running winding should h"ve (") high resist"nce "nd low induct"nce (b) low resist"nce "nd high induct"nce (c) high resist"nce
Hose Claw Couplings SKG 13-DR SKG 19-DR SKG 25-DR
Swivelling, IN 89 High qulity couplings, hed of mlleble iron, thred connections nd hose stem of turned steel with specil profile, zinc-plted nd yellow pssivted (free of chrome VI) with sfety notches 30
Special Accessories. 3G3IV-PCN329-E Inverter to PC cable. JVOP-160-OY Digital Operator (LCD display) JVOP-161-OY Digital Operator (LED display)
PE R52 C24 U11 C16 C26 R6 U8 C28 C22 U7 R131 C33 U6 T1 Y1 U14 JP3 R25 R15 R15 R15 R10 R10 R105 R21 R5 C11 U10 R102 C12 R7 + + U9 R28 C5 R20 R30 R U10 C3 JP1 C1 + C17 R14 R1 R2 R5 R11 U1 C2 C21 R3 R120