CONTROL OF POLLUTANTS WITH CATALYTIC CONVERTER AND COPPER COATED CYLINDER HEAD IN METHANOL- GASOLINE BLEND OPERATED TWO STROKE SI ENGINE
|
|
- Archibald Norman
- 5 years ago
- Views:
Transcription
1 International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 6, June 2015, pp , Article ID: IJMET_06_06_013 Available online at Journal Impact Factor (2015): (Calculated by GISI) ISSN Print: and ISSN Online: IAEME Publication CONTROL OF POLLUTANTS WITH CATALYTIC CONVERTER AND COPPER COATED CYLINDER HEAD IN METHANOL- GASOLINE BLEND OPERATED TWO STROKE SI ENGINE Dr. K. Kishor Assistant Professor, Mechanical Engineering Department, CBIT, Hyderabad, India ABSTRACT Experiments were conducted to evaluate and control the exhaust emissions from two stroke single cylinder, spark ignition (SI) engine, with alcohol blended gasoline (80% gasoline, 20% methanol, by volume) having copper coated engine [C, copper-(thickness, 300 μ) coated on inner surface of the cylinder head] provided with catalytic converter with sponge iron and manganese as as catalysts and compared with conventional SI engine () with pure gasoline operation. The exhaust emissions of Carbon Monoxide (CO) and Unburnt Hydrocarbons (UBHC) were determined at different values of Brake Mean Effective Pressure (BMEP) with Netel Chromatograph CO/UBHC analyzer. Aldehyde levels were determined by Dinitrophenyl Hydrazine (DNPH) method. Copper coated combustion chamber with alcohol blended gasoline with catalytic converter using sponge iron catalyst with air injection significantly reduced the pollutants in comparison with with pure gasoline operation. Key words: Aldehydes, CO, DNPH, Exhaust emissions, UBHC Cite this Article: Dr. K. Kishor. Control of Pollutants with Catalytic Converter and Copper Coated Cylinder Head In Methanol- Gasoline Blend Operated Two Stroke Si Engine, International Journal of Mechanical Engineering and Technology, 6(6), 2015, pp INTRODUCTION The paper is divided into i) Introduction, ii) Materials and methods, iii) Results and discussion, iv) Conclusions, research findings, future scope of work followed by references
2 Control of Pollutants with Catalytic Converter and Copper Coated Cylinder Head In Methanol- Gasoline Blend Operated Two Stroke Si Engine Alcohols are the promising substitutes for the base fuel (gasoline) being used in SI engines, as their properties are compatible to those of gasoline fuels. The use of alcohol in small quantities poses no problem in SI engines. Performance of the engine can also be improved with the change of fuel composition with alcohol-gasoline blends in SI engines. Out of the two alcohols available (methyl alcohol and ethyl alcohol), methyl alcohol is preferred to ethyl alcohol, as it is not harmful. Methyl alcohol has got properties compatible to those of gasoline and its octane rating is m than 100. Also, methyl alcohol can be manufactured even from the municipal solid wastes. When SI engines are run with alcohols, the major emissions are CO and UBHC, besides aldehydes. As the exhaust emissions of CO (%), UBHC (ppm) and aldehydes (% concentration) cause harmful health hazards on human beings and on environment, necessary steps are to be taken in the form of changing the fuel composition or engine design modification or both, to decrease them. Coupling catalytic converter to the engine is a simple technique to decrease the exhaust emissions from the engine. Catalytic converters are to be provided with suitable and cheap catalysts like sponge iron and manganese, to reduce the exhaust emissions. Murali Krishna et al. [1] conducted experiments for controlling the pollutants from an engine [2]. The engine parameters have substantial effects in reducing the emissions. Injection of heated air in to the catalytic converter has drastically reduced the emissions. Methyl alcohol blend in catalytically activated engine decreased the pollutants in comparison with the base engine. In this work, experiments were conducted on a single cylinder, air-cooled, Bajaj make, two-stroke SI engine, with a brake power of 2.2 kw at a rated speed of 3000 rpm with a compression ratio of 7.5:1 with base fuel (gasoline) and methyl alcohol blend (gasoline-80%, methanol- 20% by volume), for various configurations of the engine such as base engine () and catalytically activated engine (C, inner surface of the cylinder head being coated with copper) and being provided with catalytic converter along with air injection employing sponge iron ()/manganese () catalyst and the experimental results were compared with the base engine. Exhaust emissions of CO, UBHC aldehydes (formaldehydes and acetaldehydes) were controlled by catalytic converter with sponge iron as catalyst. 2. MATERIALS AND METHODS This section deals with fabrication of copper coated engine (C, inner surface of the cylinder head being coated with copper), description of experimental set up employing catalytic converter using sponge iron/manganese catalysts. In the copper coated engine, by flame spraying technique, a high thermal conductive catalytic material like copper was coated on the inner surface of cylinder head. A bond coating of nickel-cobalt-chromium was sprayed for a thickness of 100µ. On this coating, an alloy of copper (89.5%), aluminium (9.5%) and iron (1%) was coated for 300µ thickness, with a METCO flame spray gun. Dhandapani et al. [3, 4] conducted experiments on copper coated SI engine with gasoline as fuel and life test was carried out for 50 hours. During these 50 hours, wear and tear was not reported from the engine editor@iaeme.com
3 Dr. K. Kishor Plate-1 shows the photographic view of copper coated cylinder head. Plate 1 Photographic view of copper coated cylinder head Figure 1 shows the schematic diagram of the experimental set up that was employed to analyze the exhaust emissions from the engine. 1. Engine, 2. Electrical swinging field dynamometer, 3. Loading arrangement, 4. Fuel tank, 5. Torque indicator/controller sensor, 6. Fuel rate indicator sensor, 7. Hot wire gas flow indicator, 8. Multi- channel temperature indicator, 9. Speed indicator, 10. Air flow indicator, 11. Exhaust gas temperature indicator, 12. Mains ON 13. Engine ON/OFF switch, 14. Mains OFF, 15. Motor/Generator option switch, 16. Heater controller, 17. Speed indicator, 18. Directional valve, 19. Air compressor, 20. Rotometer, 21. Heater, 22. Air chamber, 23. Catalytic chamber, 24. CO/HC analyzer, 25. Filter, 26. Round bottom flasks containing DNPH solution Figure 1 Schematic diagram of the experimental set up An air-cooled single-cylinder 2.2 kw BP two-stroke SI engine with a rated speed of 3000 rpm was provided with an electrical swinging field dynamometer for the measurement of brake power (BP). CO and UBHC emissions in engine exhaust were measured with Netel Chromatograph analyzer. Aldehyde emissions (formaldehydes and acetaldehydes) are measured with wet chemical (DNPH) method [5]. A catalytic converter [6] (Figure.2) is fitted to exhaust pipe of engine [7]. Provision is also made to inject a definite quantity of air into catalytic converter. Air quantity drawn from compressor and injected into converter is kept constant so that backpressure does not increase. Aluminium was coated at the inner surface of catalytic converter for a thickness of 500 microns and was superior to existing one in order to reduce the editor@iaeme.com
4 Control of Pollutants with Catalytic Converter and Copper Coated Cylinder Head In Methanol- Gasoline Blend Operated Two Stroke Si Engine pollutants effectively. The catalytic converter was tested with a number of catalysts and out of which Sponge Iron and Manganese were proved to be effective in reducing the pollutants. Hence they were selected as catalysts and the performance of one catalyst was compared with the performance of other catalyst. Note: All dimensions are in mm Air chamber, 2. Inlet for air chamber from engine, 3. Inlet for air chamber from compressor, 4. Outlet for air chamber, 5. Catalytic chamber, 6. Outer cylinder, 7. Intermediate-cylinder, 8. Inner-cylinder, 9. Inner sheet, 10. Intermediate sheet, 11. Outer sheet, 12. Outlet for exhaust gases, 13. Provision to deposit the catalyst, and, 14. Insulation. Figure 2 Details of Catalytic converter 3. RESULTS AND DISCUSSION This section deals with i). Variation of CO emissions with BMEP, ii) variation of UBHC emissions with BMEP, and iii) data of Aldehyde emissions (Formaldehydes and Acetaldehydes) Exhaust Emissions Provision of catalytic converter and different operating conditions of catalytic converter are, Set-A: Without catalytic converter and without air injection; Set-B: With catalytic converter and without air injection; and Set-C: With catalytic converter and with air injection. The data of CO emissions {magnitude and the % deviation over the base condition (base engine-base fuel-set-a catalyst)} from the base engine and catalytic coated engine (copper coated cylinder head) using experimental fuels under various sets of catalytic converter with (Sponge Iron) / (Manganese) catalyst was presented in the TABLE editor@iaeme.com
5 Dr. K. Kishor TABLE 1 Data of CO emissions (%) at full load operation and the % deviation over base condition operation Engine version Base engine Catalytic coated engine Fuel used Base fuel Methyl alcohol blend Base fuel Methyl alcohol blend Set-A Set-B Set-C Catalyst Conditions Magnitude % deviation % % -18.1% -18.1% -49.1% % Magnitude % deviation -40% -20% % % -50.9% -34.5% -69.5% % Magnitude % deviation -60% -40% % % -67.2% -50.9% -79.6% % Table-1 indicated that, C was m effective in reducing the pollutants in comparison with the base engine with both catalysts, as good combustion is achieved due to turbulence with copper coating. Air injection further reduced the pollutants due to oxidation reactions in both the engine versions. catalyst was found to be m effective in reducing the CO emissions in comparison with for both engine versions using experimental fuels. Methyl alcohol blend in C reduced the CO emissions with the use of sponge iron catalyst and that with air injection in to the catalytic converter, CO emissions were decreased further. The data of UBHC emissions {magnitude and the % deviation over the base condition (base engine-base fuel-set-a catalyst)} from the base engine and catalytic coated engine (copper coated cylinder head) using experimental fuels under various sets of catalytic converter with (Sponge Iron) / (Manganese) catalyst was presented in the TABLE.2. TABLE 2 Data of UBHC emissions (PPM) at full load operation and the % deviation over Engine version Base engine Catalytic coated engine Fuel used Base fuel Methanol blend Base fuel Methanol blend Catalyst Conditions Set-A Set-B Set-C Magnitude % deviation % % -18.4% -18.4% -43.4% -43.4% Magnitude % deviation -40% -20% -57.3% -43.1% -51% -34.7% - 66% - 54% Magnitude % deviation -60% -40% % % -67.3% -51% -77.3% -66 % It was seen in the TABLE.2 that, UBHC emissions followed the similar trends that were observed with CO emissions. However, UBHC emissions depends on quenching area (accumulation of fuel in crevices), while CO emissions depend on editor@iaeme.com
6 Control of Pollutants with Catalytic Converter and Copper Coated Cylinder Head In Methanol- Gasoline Blend Operated Two Stroke Si Engine incomplete combustion. There may be quantitative difference between these two, but qualitatively their behavior is the same. Methyl alcohol blend reduced the UBHC emissions with the use of sponge iron catalyst and that with air injection in to the catalytic converter, UBHC emissions were decreased further. TABLE.3 shows the data of Formaldehyde and Acetaldehyde emissions. TABLE 3 Data of aldehyde emissions (% concentration) at full load and the % deviation over Aldehyde emissions Cataly st Test fuel Base fuel Methyl alcohol blend Engine Condition C % variation of C over C % variation of C over Formaldehyde emissions Acetaldehyde emissions Sponge iron Sponge iron Set-A % % Set-B % % Set-C % % Set-A % % Set-B % % Set-C % % Set-A % % Set-B % % Set-C % % Set-A % % Set-B % % Set-C % % From the TABLE.3 it was observed that, with the provision of catalytic converter coupled with injection of air, both the aldehyde emissions were decreased. C decreased both aldehyde emissions in comparison with the base engine using the experimental fuels. This was due to improved combustion so that there was no formation of incomplete combustion products. Sponge iron catalyst effectively reduced both the aldehyde emissions over for both engine configurations using experimental fuels. Hence C with Sponge iron catalyst along with air injection in to catalytic converter was m suitable in reducing both the aldehyde 4. CONCLUSIONS 1. Catalytic coated engine with methyl alcohol blend and sponge iron catalyst decreased the CO emissions and UBHC emissions by 69.5% and 66% respectively without air injection, while the emissions were decreased by 79.6% and 77.3% respectively with air injection in comparison with the base engine. 2. With methyl alcohol blend and manganese catalyst, catalytic coated engine decreased the CO emissions and UBHC emissions by 59.3% and 54% respectively without air injection, while they were decreased by 69.4% and 66% respectively with air injection, in comparison with the base engine operation. 3. Formaldehyde emissions and acetaldehyde emissions, from the base engine and catalytic coated engine using both experimental fuels, were decreased with injection of air in to catalytic converter. 4. Sponge iron catalyst was m effective in reducing exhaust emissions in comparison with manganese for both configurations of the engine using experimental fuels editor@iaeme.com
7 Dr. K. Kishor 4.1. Research findings and future scope of work The control of exhaust emissions with copper coating on the inner surface of cylinder head with catalytic converter employing catalysts was systematically investigated. Copper coating can also be done on the top surface of piston crown in addition to the inner surface of cylinder head to decrease the pollutants further. ACKNOWLEDGEMENTS Authors thank authorities of Chaitanya Bharathi Institute of Technology, Hyderabad for facilities provided. Financial assistance from Andhra Pradesh Council of Science and Technology (APCOST), Hyderabad, is greatly acknowledged. Authors sincerely thank authorities of M/S Sai Surface Coating (P) Limited, Patancheru, Hyderabad, for extending the cooperation in coating the components of the SI engine. REFERENS [1] M.V.S. Murali Krishna, and K. Kishor, Control of pollutants from copper coated spark ignition engine with methanol blended gasoline, Indian Journal of Environmental Protection, 25 (8), 2005, [2] M.V.S. Murali Krishna, and K. Kishor, Investigations on catalytic coated spark ignition engine with methanol blended gasoline with catalytic converter, Indian Journal (CSIR) of Scientific and Industrial Research, 67, 2008, ,. [3] S. Dhandapani, Thetical and experimental investigation of catalytically activated lean burn combustion, doctoral diss., Indian Institute of Technology, Madras, [4] N. Nedunchezhian, and S. Dhandapani, Experimental investigation of cyclic variation of combustion parameters in a catalytically activated two-stroke SI engine combustion chamber, Engg Today, ISSN: , 2, 2000, [5] Inove To Kuta, Oishi Kiyohiko, and Tanaka To Shiaki, Determination of aldehydes in the automobile exhaust by HPLC, Toyota Automobile Company, Technical Improvement Division, Toyota, Japan, 21(4), 1980, [6] M.V.S. Murali Krishna, K. Kishor, and Ch. V. Ramana Reddy, Control of carbon monoxide emission in spark ignition engine with methanol blended gasoline and sponge iron catalyst, Ecology, Environment &Conservation. 13(4), 2008, [7] K. D. Sapate and A. N. Tikekar. Comparative Study of Two Stroke Spark Ignition Carburettor Mode with Direct Injection Mode Engine, International Journal of Mechanical Engineering and Technology, 4(5), 2013, pp [8] M.V.S. Murali Krishna, K. Kishor, P.V.K. Murthy, A.V.S.S.K.S. Gupta, and S. Narasimha Kumar, Comparative studies on performance evaluation of four stroke copper coated spark ignition engine with catalytic converter with alcohols, International Journal of Advances in Engineering Research, ISSN: , 2(6), 2011, [9] Ch. Indira Priyadarsini, M.V.S. Murali Krishna and P. Ushasri, Studies on Control of Aldehydes From Four Stroke Copper Coated Spark Ignition Engine with Methanol Blended Gasoline with Improved Design of Catalytic Converter, International Journal of Mechanical Engineering and Technology, 5(4), 2015, pp editor@iaeme.com
COMPARATIVE STUDIES ON PERFORMANCE PARAMETERS OF TWO STROKE SPARK IGNITION ENGINE WITH COPPER COATED PISTON WITH METHANOL BLENDED GASOLINE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 5, Issue 12, Dec 2014, pp. 139-145, Article ID: 30120140512014 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=5&itype=12
More informationD.Baswaraj, 2 P.V.Krishna Murthy, 3 K.Prasanna Lakshmi 1 Jayaprakash Narayan College of Engineering, Dharmapur, Mahabubnagar.
International Journal of Advanced Mechanical Engineering. ISSN 2250-3234 Volume 8, Number 1 (2018), pp. 25-38 Research India Publications http://www.ripublication.com A Review on Significant Parameters
More informationComparative Studies on Exhaust Emissions from Two Stroke Copper Coated Spark Ignition Engine with Alcohol Blended Gasoline with Catalytic Converter
Comparative Studies on Exhaust Emissions from Two Stroke Copper Coated Spark Ignition Engine with Blended with Catalytic Converter K. Kishor 1, M. V. S. Murali Krishna 1, P. V. K. Murthy 2 1 Mechanical
More informationI. INTRODUCTION. International Journal of Scientific Research Engineering & Technology (IJSRET), ISSN Volume 6, Issue 4, April 2017
301 Performance Parameters and Exhaust Emissions of Four Stroke Copper Coated Spark Ignition Engine with Alcohol Blended Gasoline with Catalytic Converter - A Review B.Raja Narender 1 Dr.P.V.Krishna Murthy
More informationComparative Studies on Emissions of Four Stroke Copper Coated Spark Ignition Engine with Catalytic Converter with Different Catalysts with Gasohol
Y. Nagini et al. / International Energy Journal 13 (2012) 161-168 161 Comparative Studies on Emissions of Four Stroke Copper Coated Spark Ignition Engine with Catalytic Converter with Different Catalysts
More informationINTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL Volume 2, No 1, 2011
Performance of copper coated two stroke spark ignition engine with Gasohol with Catalytic converter with different catalysts Narasimha Kumar.S 1, Murali Krishna M.V.S. 2, Murthy P.V.K. 3, Reddy D.N. 4,
More informationInternational Journal of Innovative Research in Science, Engineering and Technology. (An ISO 3297: 2007 Certified Organization)
Comparative Studies on Performance Parameters and Exhaust Emissions from Four Stroke Copper Coated Spark Ignition Engine with Alcohol Blended Gasoline with Catalytic Converter K. Kishor 1, M.V.S. Murali
More informationAccepted 25 November 2013, Available online 01 December 2013, Vol.3, No.5 (December 2013)
Research Article International Journal of Current Engineering and Technology ISSN 2277-4106 2013 INPRESSCO. All Rights Reserved. Available at http://inpressco.com/category/ijcet Comparative Studies on
More informationResearch Article Studies on Exhaust Emissions from Copper-Coated Gasohol Run Spark Ignition Engine with Catalytic Converter
International Scholarly Research Network ISRN Mechanical Engineering Volume, Article ID 779, 6 pages doi:.//779 Research Article Studies on Exhaust Emissions from Copper-Coated Gasohol Run Spark Ignition
More informationInternational Journal of Innovative Research in Science, Engineering and Technology. (An ISO 3297: 2007 Certified Organization)
Influence of Ethanol Gasoline Blends on Performance Parameters and Combustion Characteristics Of Copper Coated Two Stroke Spark Ignition Engine With Gasohol S.Narasimha Kumar Asst. Professor, Department
More informationPerformance of copper coated spark ignition engine with methanol-blended gasoline with catalytic converter
Journal of Scientific & Industrial Research KRISHNA & KISHOR: COPPER-COATED SI ENGINE WITH METHANOL BLENDED GASOLINE 543 Vol. 67, July 2008, pp. 543-548 Performance of copper coated spark ignition engine
More informationINTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET)
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 6340(Print), ISSN 0976 6340 (Print) ISSN 0976 6359
More informationVol. 2, Issue IV, April 2014 ISSN
Control of Aldehydes from Four Stroke Spark Ignition Engine with Copper Coated Combustion Chamber with Gasohol with Improved Design of Catalytic Converter Y.Nagini 1, M.V.S. Murali Krishna 2, S.Naga Sarada
More informationControl Of Pollution Levels of Four Stroke Spark Ignition Engine Fuelled With Methanol Blended Gasoline
Control Of Pollution Levels of Four Stroke Spark Ignition Engine Fuelled With Methanol Blended Gasoline Ch. Indira Priyarsini 1, Maddali V. S. Murali Krishna 2, P.Ushasri 3, Machiraju Aditya Seshu 4 1,2,4
More informationINVESTIGATIONS ON REDUCTION OF CARBON MONOXIDE FROM CATALYTIC COATED SPARK IGNITION ENGINE WITH CATALYTIC CONVERTER
CHAPTER 11 c c. t= - - s--= pe-1 - co -l,r t: c. c. INVESTIGATIONS ON REDUCTION OF CARBON MONOXIDE FROM CATALYTIC COATED SPARK IGNITION ENGINE WITH CATALYTIC CONVERTER M. V.S. Murali Krishna 1, T. Ratna
More informationEXPERIMENTAL INVESTIGATION OF THERMAL PERFORMANCE OF PETROL ENGINE USING FUEL CATALYST
EXPERIMENTAL INVESTIGATION OF THERMAL PERFORMANCE OF PETROL ENGINE USING FUEL CATALYST Sagar.A.Patil 1, Priyanka.V.Kadam 2, Mangesh.S.Yeolekar 3, Sandip.B.Sonawane 4 1 Student (Final Year), Department
More informationChandra Prasad B S, Sunil S and Suresha V Asst. Professor, Dept of Mechanical Engineering, SVCE, Bengaluru
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 7, July 2018, pp. 997 1004, Article ID: IJMET_09_07_106 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=7
More informationInfluence of Fuel Injector Position of Port-fuel Injection Retrofit-kit to the Performances of Small Gasoline Engine
Influence of Fuel Injector Position of Port-fuel Injection Retrofit-kit to the Performances of Small Gasoline Engine M. F. Hushim a,*, A. J. Alimin a, L. A. Rashid a and M. F. Chamari a a Automotive Research
More informationPERFORMANCE AND EMISSION ANALYSIS OF DIESEL ENGINE BY INJECTING DIETHYL ETHER WITH AND WITHOUT EGR USING DPF
PERFORMANCE AND EMISSION ANALYSIS OF DIESEL ENGINE BY INJECTING DIETHYL ETHER WITH AND WITHOUT EGR USING DPF PROJECT REFERENCE NO. : 37S1036 COLLEGE BRANCH GUIDES : KS INSTITUTE OF TECHNOLOGY, BANGALORE
More informationAnalysis of Emission characteristics on Compression Ignition Engine using Dual Fuel Mode for Variable Speed
International Journal of Engineering Research and Development e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.com Volume 4, Issue 3 (October 2012), PP. 23-27 Analysis of Emission characteristics on Compression
More informationINTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET)
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN ISSN 0976-6480 (Print) ISSN 0976-6499
More informationEXPERIMENTAL INVESTIGATIONS ON 4- STROKE SINGLE CYLINDER DIESEL ENGINE (C.I) WITH CHANGING GEOMETRY OF PISTON
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 218, pp. 693 7, Article ID: IJMET_9_13_72 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=13
More informationEXPERIMENTAL ANALYSIS OF THERMAL BARRIER COATING IN TWO STROKE SI ENGINE
EXPERIMENTAL ANALYSIS OF THERMAL BARRIER COATING IN TWO STROKE SI ENGINE Er. Ganesh V. Thorve, Prof. Sulas Borkar Gurunanak Institute of Engineering and Management, Nagpur ABSTRACT The demand for energy
More informationInternational Journal of Environmental Science: Development and Monitoring (IJESDM) ISSN No , Volume 4 No. 2 (2013)
Improved and Latest Design of a Nanosized Catalytic Converter for Pollution Prevention Implemented to Four Stroke Engine with Experimental Validation by Modeling Mukesh Thakur 1 and N.K. Saikhedkar 2 1
More informationStudy of Performance and Emission Characteristics of a Two Stroke Si Engine Operated with Gasoline Manifold Injectionand Carburetion
Indian Journal of Science and Technology, Vol 9(37), DOI: 10.17485/ijst/2016/v9i37/101984, October 2016 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 Study of Performance and Emission Characteristics
More informationStudy of the Effect of CR on the Performance and Emissions of Diesel Engine Using Butanol-diesel Blends
International Journal of Current Engineering and Technology E-ISSN 77 416, P-ISSN 47 5161 16 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Study of the
More informationParvezalam Shaikh and S.P. Yeole Department of Mechanical Engineering, P.R Pote (Patil) Group of Educational Institutions, Amravati, India
International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 11, Nov 215, pp. 132-144, Article ID: IJMET_6_11_16 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=6&itype=11
More informationInvestigations on reduction of carbon monoxide -in spark ignition engine with catalytic converter with gasohol
Eco. Env. & Cons. 16 (3): 2010; pp. (389-393) Copyright@ EM International Investigations on reduction of carbon monoxide -in spark ignition engine with catalytic converter with gasohol M.V.S. Murali Krishna\
More information4. With a neat sketch explain in detail about the different types of fuel injection system used in SI engines. (May 2016)
SYED AMMAL ENGINEERING COLLEGE (Approved by the AICTE, New Delhi, Govt. of Tamilnadu and Affiliated to Anna University, Chennai) Established in 1998 - An ISO 9001:2000 Certified Institution Dr. E.M.Abdullah
More informationThe influence of thermal regime on gasoline direct injection engine performance and emissions
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS The influence of thermal regime on gasoline direct injection engine performance and emissions To cite this article: C I Leahu
More informationPerformance Evaluation of a High Grade Low Heat Rejection Diesel Engine with Waste Fried Vegetable Oil
International Journal of Engineering and Technology Volume 2 No. 3, March, 2012 Performance Evaluation of a High Grade Low Heat Rejection Diesel Engine with Waste Fried Vegetable Oil R.P. Chowdary 1, M.V.S.
More informationDevelopment of the Micro Combustor
Development of the Micro Combustor TAKAHASHI Katsuyoshi : Advanced Technology Department, Research & Engineering Division, Aero-Engine & Space Operations KATO Soichiro : Doctor of Engineering, Heat & Fluid
More informationREDUCTION OF EMISSIONS BY ENHANCING AIR SWIRL IN A DIESEL ENGINE WITH GROOVED CYLINDER HEAD
REDUCTION OF EMISSIONS BY ENHANCING AIR SWIRL IN A DIESEL ENGINE WITH GROOVED CYLINDER HEAD Dr.S.L.V. Prasad 1, Prof.V.Pandurangadu 2, Dr.P.Manoj Kumar 3, Dr G. Naga Malleshwara Rao 4 Dept.of Mechanical
More informationExperimental Investigation of Performance and Exhaust Emission Characteristics of Diesel Engine by Changing Piston Geometry
Experimental Investigation of Performance and Exhaust Emission Characteristics of Diesel Engine by Changing Piston Geometry 1 Vaibhav Bhatt, 2 Vandana Gajjar 1 M.E. Scholar, 2 Assistant Professor 1 Department
More informationComparative performance and emissions study of a lean mixed DTS-i spark ignition engine operated on single spark and dual spark
26 IJEDR Volume 4, Issue 2 ISSN: 232-9939 Comparative performance and emissions study of a lean mixed DTS-i spark ignition engine operated on single spark and dual spark Hardik Bambhania, 2 Vijay Pithiya,
More informationEXPERIMENTAL INVETIGATIONN ON PERFORMANCE AND EMISSION CHARACTERISTICS OF DI- CI ENGINE FUELED WITH PREHEATED SHEA OLEIN BIODIESEL
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 11, November 2018, pp. 2006 2014, Article ID: IJMET_09_11 211 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtype=
More informationUse of Alternative Fuel in Lower Heat Rejection Engine with Different Insulation Levels
International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 6, Number 4 (2013), pp. 499-506 International Research Publication House http://www.irphouse.com Use of Alternative Fuel
More informationPerformance Enhancement & Emission Reduction of Single Cylinder S.I. Engine using Tri Fuels -An Experimental Investigation
IJSTE - International Journal of Science Technology & Engineering Volume 1 Issue 11 May 2015 ISSN (online): 2349-784X Performance Enhancement & Emission Reduction of Single Cylinder S.I. Engine using Tri
More informationInvestigation of Effect of Intake Air Preheating By Heat Wheel on Performance and Emission Characteristics of Diesel Engine
Investigation of Effect of Intake Air Preheating By Heat Wheel on Performance and Emission Characteristics of Diesel Engine Pradip G. Karale 1, Dr. J.A. Hole 2 1 PG Student Mechanical Engineering Dept.
More informationEXPERIMENTAL INVESTIGATION OF THE EFFECT OF HYDROGEN BLENDING ON THE CONCENTRATION OF POLLUTANTS EMITTED FROM A FOUR STROKE DIESEL ENGINE
EXPERIMENTAL INVESTIGATION OF THE EFFECT OF HYDROGEN BLENDING ON THE CONCENTRATION OF POLLUTANTS EMITTED FROM A FOUR STROKE DIESEL ENGINE Haroun A. K. Shahad hakshahad@yahoo.com Department of mechanical
More informationExperimental Investigation of Ethanol-Methanol- Gasoline Blend on Multi cylinder SI Engine using Catalytic Converter
Experimental Investigation of Ethanol-Methanol- Gasoline Blend on Multi cylinder SI Engine using Catalytic Converter #1 A. R. Pattiwar, #2 V. N. Kapatkar, #3 S. A. Kulkarni #123 Mechanical Engineering
More informationEffect of Thermal Barrier Coating on Piston Head of 4-Stroke Spark Ignition Engine
International Journal of Advances in Scientific Research and Engineering (ijasre) E-ISSN : 2-8006 Vol.3, Special Issue Aug - 207 Effect of Thermal Barrier Coating on Piston Head of -Stroke Spark Ignition
More informationA STUDY ON DIESEL ENGINE PERFORMANCE DEPENDS ON BP AND BSFC BY APPLYING DIFFERENT INJECTION PRESSURE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 11, November 2018, pp. 599 603, Article ID: IJMET_09_11_059 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=11
More informationME 74 AUTOMOTIVE POLLUTION AND CONTROL Automobile Engineering-vii sem Question Bank( )
ME 74 AUTOMOTIVE POLLUTION AND CONTROL Automobile Engineering-vii sem Question Bank(2013-2014) UNIT I INTRODUCTION 1. How the transient operation of S.I engine will cause CO formation? (may /June 2007)
More informationAn Experimental Analysis of IC Engine by using Hydrogen Blend
IJSTE - International Journal of Science Technology & Engineering Volume 2 Issue 11 May 2016 ISSN (online): 2349-784X An Experimental Analysis of IC Engine by using Hydrogen Blend Patel Chetan N. M.E Student
More informationA.S.P. Sri Vignesh 1, Prof C. Thamotharan 2 1 (Department of Automobile Engineering, Bharath Institute of Science and Technology, Bharath University
International Journal of Engineering Science Invention ISSN (Online): 2319 6734, ISSN (Print): 2319 6726 Volume 4 Issue 3 March 2015 PP.01-06 Engine Performance and Emission Test of Waste Plastic Pyrolysis
More informationInfluence of Injection Timing and Preheating on Exhaust Emissions of Di Diesel Engine with Air Gap Insulation with Linseed Biodiesel
International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347 5161 2016 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Influence
More informationInternational Journal of Scientific & Engineering Research, Volume 7, Issue 8, August-2016 ISSN
ISSN 2229-5518 2417 Experimental Investigation of a Two Stroke SI Engine Operated with LPG Induction, Gasoline Manifold Injection and Carburetion V. Gopalakrishnan and M.Loganathan Abstract In this experimental
More informationEffect of Tangential Grooves on Piston Crown Of D.I. Diesel Engine with Retarded Injection Timing
International Journal of Engineering Research and Development e-issn: 2278-067X, p-issn : 2278-800X, www.ijerd.com Volume 5, Issue 10 (January 2013), PP. 01-06 Effect of Tangential Grooves on Piston Crown
More informationCOMPARATIVE STUDIES ON MEDIUM GRADE LOW HEAT REJECTION DIESEL ENGINE AND CONVENTIONAL DIESEL ENGINE WITH CRUDE COTTON SEED OIL
COMPARATIVE STUDIES ON MEDIUM GRADE LOW HEAT REJECTION DIESEL ENGINE AND CONVENTIONAL DIESEL ENGINE WITH CRUDE COTTON SEED OIL D. Srikanth 1, M.V.S. Murali Krishna 2, P.Ushasri 3 and P.V. Krishna Murthy
More informationMODELING AND THERMAL ANALYSIS OF SI ENGINE PISTON USING FEM
Int. J. Mech. Eng. & Rob. Res. 2014 K Ramesh Babu et al., 2014 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 3, No. 1, January 2014 2014 IJMERR. All Rights Reserved MODELING AND THERMAL ANALYSIS OF
More informationSingle Cylinder 4 Stroke VCR Diesel Engine Performance And Analysis At Various Blends Of Fuels Under Various Cooling Rates
ISSN: 2278 0211 (Online) Single Cylinder 4 Stroke VCR Diesel Engine Performance And Analysis At Various Blends Of Fuels Under Various Cooling Rates B Lakshmana Swamy Associate Professor, Mechanical Engineering
More informationEFFECT OF EMULSIFIER ON PERFORMANCE AND EMISSION CHARACTERISTICS OF DIESEL ENGINE USING PALM BIODIESEL
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 8, Issue 2, Apr 2018, 1243-1248 TJPRC Pvt. Ltd. EFFECT OF EMULSIFIER
More informationGRD Journals- Global Research and Development Journal for Engineering Volume 1 Issue 12 November 2016 ISSN:
GRD Journals- Global Research and Development Journal for Engineering Volume 1 Issue 12 November 2016 ISSN: 2455-5703 Effect of Brake Thermal Efficiency of a Variable Compression Ratio Diesel Engine Operating
More informationModifications on a Small Two Wheeler Two Stroke SI Engine for Reducing Fuel Consumption and Exhaust Emissions
RIO 5 - World Climate & Energy Event, 15-17 February 5, Rio de Janeiro, Brazil Modifications on a Small Two Wheeler Two Stroke SI Engine for Reducing Fuel Consumption and Exhaust Emissions Kunam Anji Reddy,
More informationCHAPTER 8 EFFECTS OF COMBUSTION CHAMBER GEOMETRIES
112 CHAPTER 8 EFFECTS OF COMBUSTION CHAMBER GEOMETRIES 8.1 INTRODUCTION Energy conservation and emissions have become of increasing concern over the past few decades. More stringent emission laws along
More informationEffect of Preheating Air in Petrol Engine by Using Exhaust Gas Heat Energy
ISSN 2395-1621 Effect of Preheating Air in Petrol Engine by Using Exhaust Gas Heat Energy #1 Ghorpade Sangram D., #2 Lokhande Akshay R., #3 Lagad Pradeep B. #4 Jangam Raviraj S. 1 sangramghorpade1996@gmail.com
More information6340(Print), ISSN (Online) Volume 4, Issue 5, September - October (2013) IAEME AND TECHNOLOGY (IJMET)
International INTERNATIONAL Journal of Mechanical JOURNAL Engineering OF MECHANICAL and Technology (IJMET), ENGINEERING ISSN 0976 AND TECHNOLOGY (IJMET) ISSN 0976 6340 (Print) ISSN 0976 6359 (Online) Volume
More informationResearch Article. Effect of exhaust gas recirculation on NOx emission of a annona methyl ester operated diesel engine
Available online www.jocpr.com Journal of Chemical and Pharmaceutical Research, 2015, 7(5):723-728 Research Article ISSN : 0975-7384 CODEN(USA) : JCPRC5 Effect of exhaust gas recirculation on NOx emission
More informationEXHAUST EMISSIONS OF 4 STROKE SPARK IGNITION ENGINE WITH INDIRECT INJECTION SYSTEM USING GASOLINE-ETHANOL FUEL
Vol. 04 No. 01, July 2017, Pages 44-49 EXHAUST EMISSIONS OF 4 STROKE SPARK IGNITION ENGINE WITH INDIRECT INJECTION SYSTEM USING GASOLINE-ETHANOL FUEL Mega Nur Sasongko 1, Widya Wijayanti 1, Fernando Nostra
More informationEXPERIMENTAL INVESTIGATION OF EXHAUST FROM COMPRESSION IGNITION ENGINE BASED AUTOMOBILES USING AN INNOVATIVE CATALYTIC CONVERTER DURING EMISSIONS TEST
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 2018, pp. 906 912, Article ID: IJMET_09_13_094 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=13
More informationDevelopment of In-Line Coldstart Emission Adsorber System (CSEAS) for Reducing Cold Start Emissions in 2 Stroke SI Engine
Development of In-Line Coldstart Emission Adsorber System (CSEAS) for Reducing Cold Start Emissions in 2 Stroke SI Engine Wing Commander M. Sekaran M.E. Professor, Department of Aeronautical Engineering,
More informationPotential of Large Output Power, High Thermal Efficiency, Near-zero NOx Emission, Supercharged, Lean-burn, Hydrogen-fuelled, Direct Injection Engines
Available online at www.sciencedirect.com Energy Procedia 29 (2012 ) 455 462 World Hydrogen Energy Conference 2012 Potential of Large Output Power, High Thermal Efficiency, Near-zero NOx Emission, Supercharged,
More informationPower Performance and Exhaust Gas Analyses of Palm Oil and Used Cooking Oil Methyl Ester as Fuel for Diesel Engine
ICCBT28 Power Performance and Exhaust Gas Analyses of Palm Oil and Used Cooking Oil Methyl Ester as Fuel for Diesel Engine R. Adnan *, Universiti Tenaga Nasional, MALAYSIA I. M. Azree, Universiti Tenaga
More informationEFFECT OF H 2 + O 2 GAS MIXTURE ADDITION ON EMISSONS AND PERFORMANCE OF AN SI ENGINE
EFFECT OF H 2 + O 2 GAS MIXTURE ADDITION ON EMISSONS AND PERFORMANCE OF AN SI ENGINE M.Sc. Karagoz Y. 1, M.Sc. Orak E. 1, Assist. Prof. Dr. Sandalci T. 1, B.Sc. Uluturk M. 1 Department of Mechanical Engineering,
More informationEffects of Ethanol-Gasoline blends on Performance and Emissions of Gasoline Engines
Effects of Ethanol-Gasoline blends on Performance and Emissions of Gasoline Engines Er. Kapil Karadia 1, Er. Ashish Nayyar 2 1 Swami Keshvanand Institute of Technology, Management &Gramothan, Jaipur,Rajasthan
More informationEXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF FOUR STROKE SINGLE CYLINDER PETROL ENGINE USING A PRE-HEATING SET-UP FOR METHANOL BLENDS
International Journal of Mechanical Engineering and Technology (IJMET) Volume 10, Issue 02, February 2019, pp. 351-360, Article ID: IJMET_10_02_036 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=10&itype=2
More informationEXPERIMENTAL INVESTIGATION ON 4 STROKE SINGLE CYLINDER DIESEL ENGINE BLENDED WITH TYRE OIL
EXPERIMENTAL INVESTIGATION ON 4 STROKE SINGLE CYLINDER DIESEL ENGINE BLENDED WITH TYRE OIL D.Sravani 1, R.Jyothu Naik 2, P. Srinivasa Rao 3 1 M.Tech Student, Mechanical Engineering, Narasaraopet Engineering
More informationVivek Pandey 1, V.K. Gupta 2 1,2 Department of Mechanical Engineering, College of Technology, GBPUA&T, Pantnagar, India
Study of Ethanol Gasoline Blends for Powering Medium Duty Transportation SI Engine Vivek Pandey 1, V.K. Gupta 2 1,2 Department of Mechanical Engineering, College of Technology, GBPUA&T, Pantnagar, India
More informationExperimental Investigation of Performance and Emission Characteristics of Hybrid Fuel Engine
IJIRST International Journal for Innovative Research in Science & Technology Volume 1 Issue 11 April 2015 ISSN (online): 2349-6010 Experimental Investigation of Performance and Emission Characteristics
More informationPOLLUTION CONTROL IN GASOLINE ENGINE USING METAL CATALYTIC CONVERTER
Volume 119 No. 7 2018, 1235-1242 ISSN: 1311-8080 (printed version); ISSN: 1314-3395 (on-line version) url: http://www.ijpam.eu ijpam.eu POLLUTION CONTROL IN GASOLINE ENGINE USING METAL CATALYTIC CONVERTER
More informationMaterial Science Research India Vol. 7(1), (2010)
Material Science Research India Vol. 7(1), 201-207 (2010) Influence of injection timing on the performance, emissions, combustion analysis and sound characteristics of Nerium biodiesel operated single
More informationReceived 13 October 2010; revised 23 January 2011; accepted 28 January 2011
2 Journal of Scientific & Industrial Research J SCI IND RES VOL 7 MARCH 11 Vol. 7, March 11, pp. 2-224 Effects of advanced injection timing on performance and emission of a supercharged dual-fuel diesel
More informationEvaluation of Exhaust Emissions Reduction of a Retrofitted Bi-Fuel Spark Ignition Engine
M. A. Kalam et al./journal of Energy & Environment, Vol. 5, May 2006 101 Evaluation of Exhaust Emissions Reduction of a Retrofitted Bi-Fuel Spark Ignition Engine M. A. Kalam, H. H. Masjuki and I. I. Yaacob
More informationPERFORMANCE OF DIRECT INJECTION C.I. ENGINE USING KARANJA OIL AT DIFFERENT INJECTION PRESSURES
IJRET: International Journal of Research in Engineering and Technology eissn: 239-63 pissn: 232-738 PERFORMANCE OF DIRECT INJECTION C.I. ENGINE USING KARANJA OIL AT DIFFERENT INJECTION PRESSURES A.G. Matani,
More informationEFFECT ON PERFORMANCE AND COMBUSTION CHARACTERISTICS OF DIESEL ENGINE ENRICHED WITH HYDROGEN WITH VARIED PISTON BOWL GEOMETRY
International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 10, Oct 2015, pp. 39-47, Article ID: IJMET_06_10_005 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=6&itype=10
More informationFAULT ANALYSIS FOR VOLTAGE SOURCE INVERTER DRIVEN INDUCTION MOTOR DRIVE
International Journal of Electrical Engineering & Technology (IJEET) Volume 8, Issue 1, January- February 2017, pp. 01 08, Article ID: IJEET_08_01_001 Available online at http://www.iaeme.com/ijeet/issues.asp?jtype=ijeet&vtype=8&itype=1
More informationAvailable online Journal of Scientific and Engineering Research, 2018, 5(9): Research Article
Available online www.jsaer.com, 2018, 5(9):62-67 Research Article ISSN: 2394-2630 CODEN(USA): JSERBR A Study on Engine Performance and Emission Characteristics of LPG Engine with Hydrogen Addition Sung
More informationModule7:Advanced Combustion Systems and Alternative Powerplants Lecture 32:Stratified Charge Engines
ADVANCED COMBUSTION SYSTEMS AND ALTERNATIVE POWERPLANTS The Lecture Contains: DIRECT INJECTION STRATIFIED CHARGE (DISC) ENGINES Historical Overview Potential Advantages of DISC Engines DISC Engine Combustion
More informationModule 2:Genesis and Mechanism of Formation of Engine Emissions Lecture 3: Introduction to Pollutant Formation POLLUTANT FORMATION
Module 2:Genesis and Mechanism of Formation of Engine Emissions POLLUTANT FORMATION The Lecture Contains: Engine Emissions Typical Exhaust Emission Concentrations Emission Formation in SI Engines Emission
More informationPerformance and Emission Analysis of Two Stroke Four Spark Plug Single Cylinder SI Engine With Gasoline Fuel
IJIRST International Journal for Innovative Research in Science & Technology Volume 1 Issue 12 May 2015 ISSN (online): 2349-6010 Performance and Emission Analysis of Two Stroke Four Spark Plug Single Cylinder
More informationThe Effect of Volume Ratio of Ethanol Directly Injected in a Gasoline Port Injection Spark Ignition Engine
10 th ASPACC July 19 22, 2015 Beijing, China The Effect of Volume Ratio of Ethanol Directly Injected in a Gasoline Port Injection Spark Ignition Engine Yuhan Huang a,b, Guang Hong a, Ronghua Huang b. a
More informationEXPERIMENTAL INVESTIGATION OF THE EFFECT OF BTE AND NOX IN A DIRECT INJECTION VCR DIESEL ENGINE RUNNING WITH RICE BRAN METHYL ESTER
EXPERIMENTA INVESTIGATION OF THE EFFECT OF BTE AND NOX IN A DIRECT INJECTION VCR ENGINE RUNNING WITH RICE BRAN METHY ESTER Mr.V.Nageswara Reddy 1, Dr.G.Sreenivasa Rao 2. vnredd7@gmail.com 1, R.G.M. College
More informationExperimental Analysis of Utilization of Heat Using Methanol - Diesel Blended Fuel in Four Stroke Single Cylinder Water Cooled Diesel Engine
Experimental Analysis of Utilization of Heat Using Methanol - Diesel Blended Fuel in Four Stroke Single Cylinder Water Cooled Diesel Engine T. Singha 1, S. Sakhari 1, T. Sarkar 1, P. Das 1, A. Dutta 1,
More informationGandipet, Hyderabad Telangana State, India. Chevella, Rangareddy (dist) , Telangana, India
Experimental investigations of comparative performance and exhaust emissions of cottonseed biodiesel fuelled DI diesel engine with low grade LHR combustion chamber M.V.S. Murali Krishna 1, D. Srikanth
More informationHydrogen addition in a spark ignition engine
Hydrogen addition in a spark ignition engine F. Halter, C. Mounaïm-Rousselle Laboratoire de Mécanique et d Energétique Orléans, FRANCE GDRE «Energetics and Safety of Hydrogen» 27/12/2007 Main advantages
More informationConversion of Naturally Aspirated Genset Engine to Meet III A Norms for Tractor Application by Using Turbocharger
Conversion of Naturally Aspirated Genset Engine to Meet III A Norms for Tractor Application by Using Turbocharger M. Karthik Ganesh, B. Arun kumar Simpson co ltd., Chennai, India ABSTRACT: The small power
More informationExperimental investigation on constant-speed diesel engine fueled with. biofuel mixtures under the effect of fuel injection
Experimental investigation on constant-speed diesel engine fueled with biofuel mixtures under the effect of fuel injection 1 I. Vinoth kanna *, 2 K. Subramani, 3 A. Devaraj 1 2 3 Department of Mechanical
More informationPOLLUTION CONTROL AND INCREASING EFFICIENCY OF DIESEL ENGINE USING BIODIESEL
POLLUTION CONTROL AND INCREASING EFFICIENCY OF DIESEL ENGINE USING BIODIESEL Deepu T 1, Pradeesh A.R. 2, Vishnu Viswanath K 3 1, 2, Asst. Professors, Dept. of Mechanical Engineering, Ammini College of
More informationPERFORMANCE AND EMISSION ANALYSIS OF CI ENGINE FUELLED WITH THE BLENDS OF PALM OIL METHYL ESTERS AND DIESEL
ISSN: 2455-2631 July 217 IJSDR Volume 2, Issue 7 PERFORMANCE AND EMISSION ANALYSIS OF CI ENGINE FUELLED WITH THE BLENDS OF PALM OIL METHYL ESTERS AND DIESEL 1 K.Sandeep Kumar, 2 Taj, 3 B. Prashanth Assistant
More informationStudies on Performance Parameters of Di Diesel Engine with Low Grade LHR Combustion Chamber Fuelled with Linseed Biodiesel
Research Article International Journal of Current Engineering and Technology E-ISSN 2277 406, P-ISSN 2347-56 204 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Studies
More informationImproving The Emission Characteristics of Diesel Engine by Using EGR at Different Cooling Rates
Improving The Emission Characteristics of Diesel Engine by Using EGR at Different Cooling Rates G SujeevaRaju 1, G Naresh Babu 2 1M.Tech Student, Dept. Of Mechanical Engineering, Siddhartha Institute of
More informationExperimental Investigations on a Four Stoke Diesel Engine Operated by Jatropha Bio Diesel and its Blends with Diesel
International Journal of Manufacturing and Mechanical Engineering Volume 1, Number 1 (2015), pp. 25-31 International Research Publication House http://www.irphouse.com Experimental Investigations on a
More informationPerformance and Emission Characteristics of LPG-Fuelled Variable Compression Ratio SI Engine
Turkish J. Eng. Env. Sci. 32 (28), 7 12. c TÜBİTAK Performance and Emission Characteristics of LPG-Fuelled Variable Compression Ratio SI Engine Syed YOUSUFUDDIN Department of Mechanical Engineering, Vasavi
More informationThe Effect of Turbocharging on Volumetric Efficiency in Low Heat Rejection C.I. Engine fueled with Jatrophafor Improved Performance
The Effect of Turbocharging on Volumetric Efficiency in Low Heat Rejection C.I. Engine fueled with Jatrophafor Improved Performance R. Ganapathi *, Lecturer, Mechanical Engineering department, JNTUA College
More informationExperimental Investigation on Diesel Engines by Swirl Induction with Different Manifolds
Research Article International Journal of Current Engineering and Technology E-ISSN 2277 416, P-ISSN 2347-5161 214 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Experimental
More informationEFFECT OF EXHAUST GAS RECIRCULATION (EGR) IN INTERNAL COMBUSTION ENGINE
EFFECT OF EXHAUST GAS RECIRCULATION (EGR) IN INTERNAL COMBUSTION ENGINE 1 Ajinkya B. Amritkar, 2 Nilesh Badge 1ajinkyaamritkar333@gmail.com, 2 badgenilesh6@gmail.com 1,2B.E.Student, Department of Mechanical
More informationCFD ANALYSIS ON LOUVERED FIN
CFD ANALYSIS ON LOUVERED FIN P.Prasad 1, L.S.V Prasad 2 1Student, M. Tech Thermal Engineering, Andhra University, Visakhapatnam, India 2Professor, Dept. of Mechanical Engineering, Andhra University, Visakhapatnam,
More informationInternational Journal of Advanced Engineering Technology E-ISSN
International Journal of Advanced Engineering Technology E-ISS 976-3945 Research Article EXPERIMETAL WORKSTUDY O THE EFFECT OF ETHAOL GASOLIE BLEDS O THE PERFORMACE OF TWO STROKE PETROL EGIE Prof. Viral
More informationSTUDY ON THE PERFORMANCE ANALYSIS OF FOUR STROKE SINGLE CYLINDER DIESEL ENGINE FUELLED WITH TOBACCO SEED METHYL ESTERS AND CASTOR SEED METHYL ESTERS.
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 11, November 2017, pp. 1071 1082, Article ID: IJMET_08_11_109 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=11
More information