TNC Series Series C TN 114
|
|
|
- Lawrence Poole
- 5 years ago
- Views:
Transcription
1 TNC Series TNC Series 114
2 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A B C D E F G H J K L M N P Q FEMALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A B C D E F G H J K L M N P Q R S Notes: 1. I.D. to meet VSWR and contact resistance when mated with.053 +/-.001 inches ( / millimeters) diameter pin. 2. When fully engaged, the two reference planes must coincide with metal-to-metal contact. 3. Metric equivalents (to the nearest 0.01mm) are given for general information only and are based on 1 inch = 25.4 millimeters. 115 The SF suffix in the part number designates passivated stainless finish ; all others are gold finish
3 TNC Connectors Cable Connectors The specifications below are general specifications for TNCA connectors. Specific data is available from the factory upon request. The General, Electrical, Mechanical and Environmental Specifications in the following table are recommended for any procurement documents or drawings. In the event of any conflict between requirements of the text specifications, General Specification MIL-PRF and the special details of this table, the latter shall govern. These specifications are subject to change according to the latest revision of Specification MIL- PRF Requirement General Material Steel corrosion resistant per ASTM A-582, 300 Series, ASTM A-743, ASTM A-744 Brass Alloy per ASTM B-16 Beryllium copper per ASTM B-196 or B-197 PTFE Fluorocarbon per ASTM D-1457 Silicone Rubber per MIL-R-5847 and ZZ-R-765. Finish Center contacts shall be gold plated to a minimum thickness of inch in accordance with ASTM B-488, Type 3, Code C over nickel underplate. All other metal parts shall be finished so as to provide a connector which meets the corrosion requirements of this table. Design The design shall be such that the outline dimensions in this catalog are met. In addition, the assembled connector shall meet the interface dimensions. Dimensions are reference only unless stated. Electrical Insulation Resistance Dielectric Withstanding Voltage RF High Potential Withstanding Voltage Contact Resistance Voltage Standing Wave Ratio (VSWR) RF Leakage Insertion Loss Corona Level Mechanical Force to Engage and Disengage Coupling Nut Retention Force Coupling Proof Torque Cable Retention Force Specifications The insulation resistance shall not be less than 5,000 megaohms. The torque required to engage and disengage shall not exceed 2 inch-pounds. The longitudinal force is not applicable. 100 lbs. minimum. Applicable to male connectors only. 15 in.-lbs. minimum. Applicable to male connectors only. Mating Characteristics See interface dimensions shown. Applicable to females only: oversize pin / diameter.125 deep; Insertion force 2 lbs. maximum with.054 minimum diameter pin; withdrawal force 2 oz. minimum with.052 maximum diameter pin. Connector Durability The connector to be tested and its mating connector shall be subjected to 500 insertion and withdrawal cycles at 12 cycles per minute max. The connector shall show no evidence of mechanical failure and the connector shall meet the mating characteristic requirements. Recommended Mating Torque inch-pounds. Environmental Vibration Specification MIL-STD-202, Method 204, Test Condition B. Shock Specification MIL-STD-202, Method 213, Test Condition I. Thermal Shock Corrosion (Salt Spray) Specification MIL-STD-202, Method 101, Test Condition B. The salt solution shall be five percent Moisture Resistance Specification MIL-STD-202, Method 106. No measurement at high humidity. Insulation resistance shall be 200 megaohms min. within 5 minutes after removal from humidity. TNC Specifications Complete specifications on every connector in this catalog are available from the factory. 116 The SF suffix in the part number designates passivated stainless finish ; all others are gold finish
4 TNC Connectors 9009 Straight male cable SF.143 min SF.088 min SF.143 min..141* Standard units have stainless steel finish. The cable adapter section is gold plated for solderability. Figure 1 Figure 2 TNC Connectors 9010 Staight cable female min min min..141* Standard units are gold plated Bulkhead feedthrough cable female SF.143 min SF.088 min SF.143 min..141* Standard units have stainless steel finish. The cable adapter section is gold plated for solderability Flange mount cable female min min min..141* Standard units are gold plated. 117
5 TNC Connectors 9031 flange mount cable female (.141 ) Max. VSWR DC GHz CC.143 min fghz CC.088 min fghz CC.143 min..141* fghz.185 and A diameters will be gold plated on SF units for solderability. Standard units are gold plated. Add suffix SF to Part No. for stainless steel finish. 9030SF Part Number 9030SF Max. VSWR DC GHz fghz Add suffix CC to Part No. for captivated contact. Standard units have stainless steel finish. TNC Connectors 9032 A Slot Max. VSWR Part Number +.003/-.001 Position DC GHz SF.02 Horizontal fghz SF.018 Horizontal fghz SF.028 Horizontal fghz SF.02 Vertical fghz SF.018 Vertical fghz SF.028 Vertical fghz SF.036 Vertical fghz Add suffix CC to Part No. for captivated contact. Standard units have stainless steel finish min min min..141* Standard units are gold plated. Add suffix CC to Part No. for captivated contact. 118
6 TNC Connectors 9028 Straight termination panel mount female Max. VSWR Part Number DC GHz 9028CCSF 1.25:1 TNC Connectors 9045 Slot termination Max. VSWR Part Number DC GHz 1.25:1 A Slot, +.003/ CCSF CCSF CCSF CCSF Female contact termination panel mount female Max. VSWR Part Number DC GHz 1.25:1 A Dia. ± CCSF CCSF CCSF CCSF CCSF CCSF Max. VSWR Part Number DC GHz 1.25:1 A Dia. ± CCSF CCSF CCSF CCSF CCSF CCSF
7 TNC Connectors In-Series Adapters 9052CCSF male to male adapter Part Number 9052CCSF Max. VSWR DC GHz fghz 9051CCSF female to female adapter Part Number 9051CCSF Max. VSWR DC GHz fghz TNC In-Series Adapters 9050CCSF female to male adapter Part Number 9050CCSF Max. VSWR DC GHz fghz 120 The SF suffix in the part number designates passivated stainless finish ; all others are gold finish
8 121 The SF suffix in the part number designates passivated stainless finish ; all others are gold finish
- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
Type N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
2.92mm connectors DIVIDER PAGE
connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A
2.4mm connectors 155
connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.
mcx connectors DIVIDER PAGE
mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM
PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
Interface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
smpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
Interface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
Table of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
SERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
SMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
SMPM. SMPM High Frequency Push-on. Module to Module (board to board) Misalignment. Application Notes SMPM
29 High Frequency Push-on Application Notes The connector, which is 30% smaller than its cousin, the, has similar features and applications. This is a multi-functional high frequency push-on connector
Apr11 Rev A
Product Specification SMA In-Series Adapters 04Apr11 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) SMA In-Series Adapters.
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001
Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
Amphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
Amphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL
THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
MIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
Series 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
MCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES
Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-83536/15A 12 July 2004 SUPERSEDING MIL-PRF-83536/15 27 March 1992 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, PERMANENT
... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
SMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
MMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
SMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
MIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
R Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
DATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
onlinecomponents.com
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
Triax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
HT STRAIGHT ADAPTER, WRENCH FLATS ( )
HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS
3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810
1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9
Product Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version
Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and
3M Three-Wall and Four-Wall Headers. Series 3XXX
1 of 7 M Three-Wall and Four-Wall Headers Series XXX Product 78-10-0008-0 Released: 0-0-11 of 7 Table of Contents Section Page 1. Scope........ M Customer Documents....... Performance and Test Descriptions...
EN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED
INCH-POUND MIL-PRF-8805/77H 19 September, 2000 SUPERSEDING MIL-PRF-8805/77G 3 September 1999 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED This
Cannon 50 Ohm RF Connectors. Electronic Components
Cannon 50 Ohm RF Connectors Electronic Components Over 90 year history... ITT Electronic Components is an innovative and dynamic company with the in-depth experience of a 90 plus year industry leader.
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
Multi-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series
MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable
ArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
Amphenol 67 and 165 Series Miniaturized Standard Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................
AMPSEAL 16* Connector System 24 JUN 13 Rev C
Application Specification 114-13065 AMPSEAL 16* Connector System 24 JUN 13 i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 15 kv or 25 kv Separable Insulated Connector (elbow) Equipment Connection Power Cable Power Cable ELRIM Cycloaliphatic
Integrated Backshell Fire Proof Connector
8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines
nterconnect compatibility new SEALED CONNECTORS harsh environment dual seals for harsh environments ergonomic locking tab for easier mating
new harsh environment SEALED CONNECTORS nterconnect dual seals for harsh environments ergonomic locking tab for easier mating compatibility AT Series plug wedges ensure a proper seal placement and contact
35-kV 200-kV BIL Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection 35 kv Separable Insulated Connector (elbow) Bus Bar or Other Component Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other
35-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 35 kv Separable Insulated Connector (elbow) Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other
HyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
D X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
for Quadrax and ELIO 8
1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467
1Rack and Panel Connectors
Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3
Cold Resistance (Ohm) Note 1
P700L Series Part Numbering System P700L - 72-1.0 Fuse Type Voltage Amp Part Number/Rating Cold Resistance (Ohm) Note 1 Overload Interrupt Time (Second) Nominal Rating - Note 2/3 Maximum I 2 T (Ampere
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS
Amphenol Australia. ATM Series PRODUCT SHORTFORM. Amphenol Australia Pty Ltd. ATM Series
EX-STOCK AUSTRALIA ATM Series PRODUCT SHORTFORM Amphenol Australia Pty Ltd ATM Series ATM Series connectors are a high-performance, cost-effective solution specifically designed for smaller AWG applications,
FISCHER CORE SERIES STAINLESS STEEL
TECHNICAL SPECIFICATIONS FISCHER CORE SERIES Fischer Connectors SA All rights reserved Web version 1.6-06.2017 Changes without prior notice FISCHER CORE SERIES FISCHER CORE SERIES KEY FEATURES The Fischer
PRODUCT SPECIFICATION
of 3 C Section : For the 200222, 2002323, 2002444, 20025, 200252, 200252, 20026, 200262, 200262, 20028, 200283, 200284, 2002822, 2002824, 200283, 2002832, 2002833, 2002834 and 2002835 series parts..0 GENERAL
Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
PRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
PRODUCT SPECIFICATION
ML-XT COMMERCIAL VEHICLE CONNECTOR SERIES 1.0 SCOPE This Product Specification relates to the ML-XT Commercial Vehicle, (CV), Power and/or Signal wire-to-wire connector system. This system consists of
MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK05
INCH-POUND MIL-C-11015/18E 14 May 2001 SUPERSEDING MIL-C-11015/18D 28 September 1970 MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK05 The requirements for
PART NUMBER BREAKDOWN CP A 70 1 W D H - 10
SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental
25 kv Apparatus Bushings
Page 1 2001 ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric strength, dielectric loss and power factor Choice of shapes allows design innovation
Luminus Series Amphenol Pcd
Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located
Broadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
SPECIFICATION SHEET P700L CURRENT LIMITING FUSE SURFACE MOUNT MODEL
11525 Sorrento Valley Rd. San Diego, California 92121 (858) 481-0210 SPECIFICATION SHEET P700L CURRENT LIMITING FUSE SURFACE MOUNT MODEL REVISION: A B C D E F G H J DATE: 10/95 2/96 2/00 10/95 2/96 10/98
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, 10 AMPERES AND LOW LEVEL, UNSEALED
INCH-POUND 2 January 201 SUPERSEDING 1 May 200 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, AMPERES AND LOW LEVEL, UNSEALED This specification is approved for use by all Departments and Agencies
38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
HERMETIC. Hermetic Connectors. High Performance Sealing Solutions
HERMETIC Hermetic Connectors High Performance Sealing Solutions Hermetic Connectors 38999 QPL Qualified Presentation Based on glass to metal seal technology, SOURIAU offers hermetic connectors to cover
DTP Series : Contacts (Open Barrel) Type Barrel Type GA Size
Deutsch Connectors DTP Series Deutsch s DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed
MINIATURE MIL-DTL TYPE AUDIO FREQUENCY CONNECTORS
SERIES 151 MINIATURE MIL-DTL-55116 TYPE AUDIO FREQUENCY CONNECTORS FEBRUARY 2012 SERIES 151 MINIATURE MIL-DTL-55116 TYPE AUDIO FREQUENCY CONNECTORS HIGH RELIABILITY PERFORMANCE FOR MISSION-CRITICAL COMMUNICATION
Electrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms
Applications Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Description Screw
Single Pole Circuit Protectors 55. Multi-Pole Circuit Protectors 56. Configurations 58. Operating Characteristics 59.
Single Pole Circuit Protectors 55 Multi-Pole Circuit Protectors 56 Configurations 58 Operating Characteristics 59 Delay Curves 60 Specifications 61 Decision Tables 62 SINGLE POLE CIRCUIT PROTECTORS The
Fuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
SPECIFICATION AND PERFORMANCE TABLE OF CONTENT. 1. Scope Reference Documents Material and Components... 2
TABLE OF CONTENT 1. Scope... 2 2. Reference Documents.. 2 3. Material and Components...... 2 4. Design and Construction..... 2 5. Rating.. 2 6. Performance and Test Descriptions. 2 7. Test Requirements
PRODUCT SPECIFICATION
MICRO-FIT BMI FLOATING CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) connector system terminated with 20 to 30 AWG wire using crimp technology
DETAIL SPECIFICATION SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES
INCH-POUND MIL-DTL-83731/1B July 010 SUPERSEDING MIL-S-83731/1A 0 March 1987 DETAIL SPECIFICATI SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES Inactive for
Mini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
CONTENTS HMK SERIES X.100 CONNECTORS
HMK SERIES CONTENTS HMK SERIES -.100 X.100 CONNECTORS PAGE 5 Introduction 6 Specifications 7 Ordering Chart - 2 & 3 Row 2 ROW UNINTERRUPTED (17-65 CONTACTS) 8 FC, FD, FS, FW, SC, SD, SS, SW- Socket, Straight