Inductors for Power Circuits
|
|
- Harry Cooper
- 5 years ago
- Views:
Transcription
1 Inductors for Power Circuits Wound/STD magnetic shielded CLF-D series Type: CLF7-D (.9x7. mm) Issue date: May Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
2 (/) Inductors for Power Circuits Wound/STD Magnetic Shielded Conformity to RoHS Directive CLF-D Series CLF7-D This automotive product offers C heat resistance with magnetic shielding. FEATURES It is miniature size of the magnetic shield type. Mount area:.9 7.mm Height:.±.mm Capable of operating under a wide range of temperatures. to + C (Including self-temperature rise) Compliant with AEC-Q. Available for automatic mounting in tape and real package. The products do not contain lead and support lead-free soldering. APPLICATIONS For on-board equipment(ecm, SRS Air Bag, HID, EPS, Transmission control, Brake control, etc.) SHAPES AND DIMENSIONS 7.±..±. PRODUCT IDENTIFICATION CLF 7 T - D () () () () () () () Series name () Dimensions H mm ()Packaging style T () Inductance value R.µH µh µh () Inductance tolerance M ±% N ±% () TDK-EPC internal code Taping (Embossed carrier tape).9±..±. PACKAGING STYLE AND QUANTITIES Packaging style Quantity Taping pieces/reel Manufacturing number.±. Inductance print RECOMMENDED PC BOARD PATTERN (.).±. Weight:.7g HANDLING AND PRECAUTIONS Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed C. When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed ± C. Soldering time should not exceed seconds RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING CIRCUIT DIAGRAM ± C C s s Natural cooling C C to s Preheating Time(s) Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. - / 9 / e_clf-d
3 (/) ELECTRICAL CHARACTERISTICS Part No. Inductance (µh) Inductance tolerance(%) Test frequency (khz) DC resistance ( ) Rated current(a) Based on inductance change CLF7T-RN-D ± 9.m±%.9. CLF7T-RN-D. ±.m±% 7..9 CLF7T-RN-D. ±.m±%.. CLF7T-RN-D. ±.m±%.. CLF7T-R7N-D.7 ± m±%.. CLF7T-RN-D. ± 7m±%.. CLF7T-M-D ± m±%.7. CLF7T-M-D ± m±%.. CLF7T-M-D ± 9m±%.9. CLF7T-M-D ±.±%.. CLF7T-7M-D 7 ±.±%.. CLF7T-M-D ±.±%..9 CLF7T-M-D ±.±%.9.7 CLF7T-M-D ±.±%.7. CLF7T-M-D ±.±%.. CLF7T-M-D ±.±%.9. CLF7T-7M-D 7 ±.±%..7 Based on temperature rise Rated current: Value obtained when current flows and the temperature has risen to C or when DC current flows and the nominal value of inductance has fallen by %, whichever is smaller. Operating temperature range: to + C (Including self-temperature rise) Test equipment Inductance: A PRECISION LCR METER, HP or equivalent Rdc: MILLIOHM METER VP-9A, MATSUSHITA or equivalent Rated current: A PRECISION LCR METER, HP with A BIAS CURRENT SOURCE, HP/C TEST FIXTURE, HP or equivalent CLF7T-RN-D..... CLF7T-RN-D... 7 CLF7T-R7N-D CLF7T-RN-D CLF7T-RN-D.... CLF7T-RN-D 7 - / 9 / e_clf-d
4 (/) CLF7T-M-D.... CLF7T-M-D... CLF7T-7M-D CLF7T-M-D.... CLF7T-M-D... CLF7T-M-D.. CLF7T-M-D CLF7T-M-D / 9 / e_clf-d
5 (/) CLF7T-M-D CLF7T-7M-D CLF7T-M-D TEST CIRCUIT A L=.H Sample C=,μF : LCR meter A f=khz : DC constant current source PACKAGING STYLES REEL DIMENSIONS TAPE DIMENSIONS.±..max. ø.min. ø. +..±..±..±. (ø.) 7.±..7±..±. (7.) (.) (.9) (7.) Cumulative pitches=±.mm (.) ø.± ø.±. ø.±.. + (.) - / 9 / e_clf-d
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF series Type: CLF7045 (6.9x7.2 mm) CLF0040 (9.7x0.0 mm) Issue date: September 202 (/4) Inductors for Power Circuits Wound/STD Magnetic Shielded
More informationInductors for High-frequency Circuits
Inductors for High-frequency Circuits Multilayer/STD MLG series Type: MLG0603S MLG1005S MLG1608 0603[0201 inch]* 1005[0402 inch] 1608[0603 inch] * Dimensions Code JIS[EIA] Issue date: November 2011 Conformity
More informationJuly terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 215 3-terminal Filters For Large-current Power Line YFF31HC 3216 [126 inch]* Feed through filter * Dimensions Code JIS[EIA] (1/4) 3-terminal Filters For Large-current Power
More informationElectromagnetic Buzzers
Electromagnetic Buzzers SMD Without oscillator circuit SDR series Issue date: August 2007 Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury,
More informationSurface Mount Shielded Power Inductors
SCRB Series ( ------SCRB Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,
More informationVLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
More informationCGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
More informationSLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
More informationSurface Mount Shielded Power Inductors
SDRH Series ( ------SDRH Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,
More informationShielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More informationElectromagnetic Buzzers
Electromagnetic Buzzers Pin terminal Without oscillator circuit SD series Issue date: February 2013 Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium,
More informationC Series Mid Voltage Application
C Series Mid Application Type: C1005 [EIA CC0402] C1608 [EIA CC0603] C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] C5750 [EIA CC2220] Issue date: April 2011 TDK MLCC US Catalog
More informationUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
More informationTYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
More informationMLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015
January 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series (For automobiles) MLK1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before
More informationMCF3 DC86V11CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: Cover: Terminal substrate metal: Terminal primary plating: Terminal surface plating: Adhesive: Marking: Ceramic Ceramic Copper t=0.1 mm Nickel plated copper,
More informationMCF3 25CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: End-cap substrate metal: End-cap primary plating: End-cap surface plating: Adhesive: Marking: Ceramic Copper t=0.25 mm Nickel plated, 0.5 μm or more Tin
More informationMLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015
December 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLG Series (For automobiles) MLG1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] Caution Nov.4, 2015 Dec.29, 2016 Jan.30, 2017 (2/12)
More information74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
More informationNovember Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series (for automotive) MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS
More informationFrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
More informationFrelTec GmbH. Multilayer Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Multilayer Ceramic Chip Inductors SMD 10/12/2010 1/12 Freltec GmbH www.freltec.com SPECIFICATION Part Number 090 02 * 101 * J * T04 Type Size Value Tolerance
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
More informationDecember Inductors for high frequency circuits. Multilayer ceramic. MLG series (for automotive) MLG1005S type. * Dimensions Code JIS[EIA]
I N D U C T O R S December 2017 Inductors for high frequency circuits Multilayer ceramic MLG series (for automotive) MLG1005S 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/16) REMINDERS FOR USING THESE
More informationFeatures. Isolation PFM. Block Diagram
Features SMT Technology 2:1 Input Range Efficiency up to 85 I/O Isolation 00 Remote on/off Control Short Circuit Protection MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
More informationPlatinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751
Data Sheet 906125 Page 1/5 Platinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751 Design type PCS/PCF For temperatures from -50 to +150 C (-70 to +250 C) In accordance with DIN
More informationContact: Customer Service Phone: Fax: esales.electrocube.com Website:
Supplier: Electrocube, Inc., 3366 Pomona Blvd., Pomona, California 91768 Contact: Customer Service Phone: 909-595-4037 Fax: 909-595-0186 Email: esales..com Website: www..com Date: 01/02/13 Quality Assurance
More informationCM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
*RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)
More informationFebruary Inductors for High Frequency Circuits. Multilayer Ceramic. MLK Series. MLK0603 Type [0201 inch]* * Dimensions Code JIS[EIA]
February 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series MLK0603 0603 [0201 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100807 - R12 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationSurface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
More informationType TDL Solid Tantalum Capacitors
Dipped, Radial Leaded, Solid Tantalum Capacitors Specifications Capacitance Range: Voltage Range: Tolerance: Operating Temperature Range: The Type TDL, like the Type TDC, is a low cost alternative to molded
More informationMolded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
More informationSMD Common Mode Choke - CUW Series. CUW Series For USB 2.0, IEEE1394b, LVDS Applications. Product Identification
SMD Common Mode Choke - CUW Series CUW Series For USB 2.0, IEEE1394b, LVDS Applications A full series of common mode choke is designed for excellent noise attenuation with compact sizing for use in wide
More informationNovember Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS Before using
More informationPower Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
More informationJuly Inductors for High Frequency. Multilayer Ceramic. MLG series. * Dimensions Code JIS[EIA]
July 2013 Inductors for High Frequency Multilayer Ceramic MLG series MLG0603S MLG1005S MLG1608 0603 [0201 inch]* 1005 [0402 inch] 1608 [0603 inch] * Dimensions Code JIS[EIA] (1/23) REMINDERS FOR USING
More informationPower Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
More informationSRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
More informationChip beads. For power line Large current/low DC resistance type. MPZ-H series. MPZ1005-H type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s September 27 Chip beads For power line Large current/low DC resistance type MPZ-H series MPZ5-H type MPZ5-H 5[42 inch]* * Dimensions code JIS[EIA] (2/) REMINDERS FOR USING THESE
More informationChip beads. For power line Soft termination. KPZ-HR series (for automobiles) KPZ1608-HR type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s March 217 Chip beads For power line Soft termination KPZ-HR series (for automobiles) KPZ168-HR 168[63 inch]* * Dimensions code JIS[EIA] (2/1) REMINDERS FOR USING THESE PRODUCTS
More information2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationAutomotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
More informationThis specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for Warn : This product series can t be used in synchronous rectification circuit that is over 24V. PRODUCT INDENTIFICATION
More informationZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
More informationLead-free glass Nickel plated brass Ceramic Tin plated copper Sn-1.5Cu Pb87.5-Sn10.0-Ag2.5* SOC NSD9 D32V [rated current]
* RoHS Dimensions and construction: (mm) Tube: End-cap: Core: Lead wire: Solder: Marking: Lead-free glass Nickel plated brass Ceramic Tin plated copper Sn-1.5Cu Pb87.5-Sn10.0-Ag2.5* SOC NSD9 D32V [rated
More informationSMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
More informationPower Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
More informationJapan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
More informationHigh Current Inductors / PIL Series
.Features: 1. Surface mount inductor with high current rating. 2. Low resistance to keep power loss minimum..applications: Excellent for power line DC-DC conversion applications used in hard disk, notebook
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationFebruary Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0402P Type. * Dimensions Code JIS[EIA]
I N D U C T O R S February 2017 Inductors for High Frequency Circuits Multilayer Ceramic MLG-P Series MLG0402P 0402 [01005 inch]* * Dimensions Code JIS[EIA] (2/16) REMINDERS FOR USING THESE PRODUCTS Before
More informationFebruary Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0603P Type. * Dimensions Code JIS[EIA]
I N D U C T O R S February 2017 Inductors for High Frequency Circuits Multilayer Ceramic MLG-P Series MLG0603P 0603 [0201 inch]* * Dimensions Code JIS[EIA] (2/17) REMINDERS FOR USING THESE PRODUCTS Before
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationSMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
More informationAfter 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity
FEATURES SIZES K(0402), J (0603), D (0805) AND C (1008) HIGH Q, HIGH CURRENT AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE* HIGH AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE
More informationPower Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
More informationTDK. SMD Inductor(Coils)(TDK) For signal line(wound) NLV Series NLV25. capasen.com. Recommended soldering conditions.
SMD Inductor(Coils)(TDK) For signal line(wound) NLV Series NLV25 Conformity to RoHS Directive FEATURES The product has good heat durability that withstands lead-free compatible reflow soldering conditions.
More informationTube: End-cap: Core: Solder: Lead-free glass Nickel plated brass Ceramic Sn-1.5Cu. Pb87.5-Sn10-Ag2.5* ma less than 1 A.
* 1 RoHS Dimensions and construction: Tube: End-cap: Core: Solder: Lead-free glass Nickel plated brass Ceramic Sn-1.5Cu (mm) Marking: Pb87.5-Sn10-Ag2.5* 1 100 ma less than 1 A 1 A 15 A SOC [rated current]
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
More informationReference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
More informationMulti-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
More informationLead-free glass Nickel plated brass Ceramic 100 ma 15 A. Tube: End-cap: Core: Solder: 200 A. Marking: 100 ma 8 A Over 8 A 20 A. Rated breaking current
* RoHS Dimensions and construction: (mm) Tube: End-cap: Core: Solder: Marking: Lead-free glass Nickel plated brass Ceramic 100 ma 15 A 20 A 100 ma 8 A Over 8 A 20 A Sn-1.5Cu Pb87.5-Sn10.0-Ag2.5* Pb90-Cu*
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationPower Inductor SMT Type
SMD SERIES WIRE WOUND SMD CHIP INDUCTORS Applications :.DSC, DVC products..pcs.hard disk drives and computer peripherals..telecommunications devices..tv circuits..test equipment. Shape and Dimensions (Dimensions
More informationTX³ RCCBs 2P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 TX³ RCCBs CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationContent (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
More informationSPECIFICATION FOR APPROVAL
PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: Marking Dot is start winding & Inductance code 101 : 5.6±0.2 B : 4.5±0.3 C : 2.3 ref. D : 5.8 ref. E : 6.0 ref. F : 1.7 ref. B C D F E ( PCB Pattern ) Ⅱ. SCHEMTIC DIGRM:
More informationReference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
More informationLead-free glass Nickel plated brass 62 ma 1.25 A Over 1.25 A 3 A Epoxy resin 62 ma less than 1 A. Tube: End-cap: Solder: Adhesive: Marking: 1 A 3 A
RoHS Pb Dimensions and construction: (mm) Tube: End-cap: Solder: Adhesive: Marking: Lead-free glass Nickel plated brass 62 ma 1.25 A Over 1.25 A 3 A Epoxy resin 62 ma less than 1 A 1 A 3 A Sn-0.7Cu Sn-3.0Ag-0.5Cu
More informationDX³ RCCBs - ID 4P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ s - ID CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationType AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
More informationApproval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
More informationSRP7030F Series - Shielded Power Inductors
*RoHS COMPLIANT 8R2 Features Shielded construction Flat wire Unit height as low as 3. mm Inductance range:.1 to 1 μh Rated current up to 32 A RoHS compliant* This series is currently available but not
More informationReference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
More informationVAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
More informationApproval sheet. WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors. *Contents in this sheet are subject to change without prior notice.
WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLCM Series_V7.0 Jul. 2017 FEATURES 1. Ceramic structure
More information2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
More informationRADIAL LEADED INDUCTORS
RADIAL LEADED INDUCTORS WAVE PARTS NUMBER *Operating Temp. : -25~+105 (Including self-generated heat) L H L 0 8 T B 1 0 1 K =Blank space 1 2 3 4 5 6 7 INDUCTORS /LEADED INDUCTORS 1Series name Code LH 2Characteristics
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationDISCONTINUED CONTACT KEMET FOR EQUIVALENT REPLACEMENT
Dipped, Radial Leaded, Solid Tantalum Capacitors Specifications Capacitance Range: Voltage Range: Tolerance: Operating Temperature Range: DC Leakage: Capacitance Change imum: Reverse Voltage (Non-continuous):
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
More informationWire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More informationMultilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
More informationWLPM Series SMD Molded Power Inductors
WLPM545230 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLPM545230 Series_V3.0 June. 2015 FEATURES 1. Shielded construction. 2.
More informationP7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
More informationX-CON CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
X-CON CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS 2016-2017 Series Table P.3 Index Contents Index Series Chart P.3 Application Guidelines P.4 Part Number System P.8 Taping Specifications P.9 Lead Forming
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More informationFC Type 2520 (1008) Dimensions in mm (not to scale) Marking Recommended Land Pattern in mm (not to scale) ± ± ± ±0.1
3. General Use FC, F, F Features General use wire wound, resin molded chip inductor. Capable of being Re-fl ow or fl ow soldered. ide line-up from 2520 to 4532 case sizes. Good for mounting. RoHS compliant
More informationTechnical Report No A Dated
Client: Xiamen Guangpu Electronics Co.,Ltd Address: No.608,West Lingdou Road,Siming District,Xiamen,China. Attn.: Mr. Zhang Description: Panel light (LED PANEL LIGHT) Model No.: Country of origin: GPPS15033X,
More informationLow-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
More informationSMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR1307 Series
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR17 Series CONFIGURATION & DIMENSIONS(m/m) 101 A A FEATURES Excellent solderability and high heat resistance Excellent terminal strength construction
More informationOctober Circulator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Circulator SMD 5x5mm* * Dimensions Code JIS Circulator SMD Product compatible with RoHS directive Overview of PART NUMBER CONSTRUCTION CU4S0506 C - - Series name A
More information