July terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]
|
|
- Jennifer Crawford
- 6 years ago
- Views:
Transcription
1 E M C C o m p o n e n t s July terminal Filters For Large-current Power Line YFF31HC 3216 [126 inch]* Feed through filter * Dimensions Code JIS[EIA]
2 (1/4) 3-terminal Filters For Large-current Power Line Conformity to RoHS Directive Lead-free Compatible Overview of FEATURES Small and high-performance EMC components. Good attenuation characteristic in a wide band range. For large current (6A to 1A) applications. APPLICATIONS Power line of AV (LCD, PDP) products and information products (PC, server). Countermeasures against power-supply noise of communications infrastructure PA. PART NUMBER IDENTIFICATION YFF 31 HC 2A 15 M T N Series name L W Product Rated TDK Capacitance dimensions internal voltage Tolerance Taping internal Reel size Code mm code Code V Code pf code Code mm HC Large current 1H , M ±2 ø178 2A , 9 ø ,, (1.μF) Internal electrode Ni PACKAGING STYLE AND SPECIFICATIONS Package quantity (piece/reel) Type Single weight (g) ø178 ø33 YFF31HC 2, 1,.342 Conformity to RoHS Directive: This means that, in conformity with EU Directive 22/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Please contact our Sales office when your application is considered the following: The device s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
3 (2/4) Overview of RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 26 C max. Temperature( C) HAND SOLDERING Preheating 6 seconds or more 1s max. Soldering Slow cooling (Natural cooling) 15 C max. PRECAUTIONS FOR USE Before soldering, be sure to preheat components. The T preheating temperature must be 15 C max. with attention paid to thermal shock. Natural cooling of components in the air is recommended. On the other hand, when dipping them in a solvent for purposes, such as cleaning, make sure that the temperature difference ( T) is 1 When performing hand soldering for circuit modification, apply the soldering iron to the copper foil area of the printed circuit board for 3 seconds or less. The temperature of the iron tip should not exceed 3 C. Use a wrist band to discharge static electricity in your body through the grounding wire. When incorporating the printed circuit board on which this product is mounted into a frame, etc., do not apply stress to the product through local bending of the board by tightening of screws, etc. 3 Temperature( C) 15 C max. Preheating Make as short as possilble (within three seconds)
4 (3/4) YFF31HC Type(Feed Through Filter) 1.6±.2 SHAPES AND DIMENSIONS 1 IN/OUT 1.2±.3.4±.3 GND 4 2 GND 3.2±.2 3 OUT/IN 1.3 RECOMMENDED LAND PATTERN Land pattern+solder resist Land pattern 1.3±.2 * Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between them is the shortest. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Insertion loss Rated voltage Rated current Operating Storage temperature 4dB bandwidth Edc Idc temperature range range(after mount) Part No. (MHz) (V) (A) ( C) ( C).8 to to to 125 YFF31HC2A15MT N 7 to to to 125 YFF31HC2A14MT N 4 to to to 125 YFF31HC1H153MT N 6 to to to 125 YFF31HC2A13MT N The part numbers are TDK s standard specification products. : Please specify reel size code, (ø178) or 9 (ø33) Insertion Loss(dB) ELECTRICAL CHARACTERISTICS GRAPH (EXAMPLE) INSERTION LOSS vs. FREQUENCY CHARACTERISTICS 1 2 2A13 1H A A Frequency(MHz) Rated Current(A) RATED CURRENT vs. TEMPERATURE CHARACTERISTICS (DERATING) A13, 2A14, 1H153 2A Ambient temperature( C)
5 (4/4) Packing Style REEL DIMENSIONS C E B r D A W t Reel A B C D E W t r ø178 ø178±2. ø6±2. ø13±.5 ø21±.8 2.±.5 9.±.3 2.±.5 1. ø33 ø382 max.(ø33 nom.) ø5 min. ø13±.5 ø21±.8 2.±.5 1.±1.5 2.±.5 1. TAPE DIMENSIONS Plastic tape Round sprocket holes J Square punch hole for component mounting B D C E K t A H G F Q Type A B C D E F G H J K t Q YFF31HC 1.9 typ. 3.5 typ. 8.±.3 3.5± ±.1 4.±.1 2.±.5 4.±.1 ø1.5+.1/ 2.5 max..3 max. ø.5 min.
Inductors for High-frequency Circuits
Inductors for High-frequency Circuits Multilayer/STD MLG series Type: MLG0603S MLG1005S MLG1608 0603[0201 inch]* 1005[0402 inch] 1608[0603 inch] * Dimensions Code JIS[EIA] Issue date: November 2011 Conformity
More informationInductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF-D series Type: CLF7-D (.9x7. mm) Issue date: May Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead,
More informationElectromagnetic Buzzers
Electromagnetic Buzzers SMD Without oscillator circuit SDR series Issue date: August 2007 Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury,
More informationJune Multilayer Low Pass Filter. For MHz DEA160960LT-5044C1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 699-960MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 699-960MHz Conformity to RoHS Directive SHAPES
More informationChip beads. For power line Large current/low DC resistance type. MPZ-H series. MPZ1005-H type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s September 27 Chip beads For power line Large current/low DC resistance type MPZ-H series MPZ5-H type MPZ5-H 5[42 inch]* * Dimensions code JIS[EIA] (2/) REMINDERS FOR USING THESE
More informationVLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
More informationJuly Multilayer Band Pass Filter. For MHz DEA162450BT-1210A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s July 2017 Multilayer Band Pass Filter For 2400-2500MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 2400-2500MHz Conformity to RoHS Directive
More informationCGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
More informationJune Multilayer Band Pass Filter. For MHz DEA162450BT-1260B2. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 2015 Multilayer Band Pass Filter For 2400-2500MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 2400-2500MHz Conformity to RoHS Directive
More informationJune Multilayer Band Pass Filter. For MHz DEA203600BT-1240B2. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 2015 Multilayer Band Pass Filter For 3300-3900MHz 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 3300-3900MHz Conformity to RoHS Directive
More informationJune Multilayer Low Pass Filter. For MHz DEA163800LT-5017C1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 3300-3800MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 3300-3800MHz Conformity to RoHS Directive SHAPES
More informationFebruary Inductors for High Frequency Circuits. Multilayer Ceramic. MLK Series. MLK0603 Type [0201 inch]* * Dimensions Code JIS[EIA]
February 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series MLK0603 0603 [0201 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationChip beads. For power line Soft termination. KPZ-HR series (for automobiles) KPZ1608-HR type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s March 217 Chip beads For power line Soft termination KPZ-HR series (for automobiles) KPZ168-HR 168[63 inch]* * Dimensions code JIS[EIA] (2/1) REMINDERS FOR USING THESE PRODUCTS
More informationJune Multilayer Low Pass Filter. For MHz DEA162500LT-1217A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 2400-2500MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 2400-2500MHz Conformity to RoHS Directive SHAPES
More informationDecember Inductors for high frequency circuits. Multilayer ceramic. MLG series (for automotive) MLG1005S type. * Dimensions Code JIS[EIA]
I N D U C T O R S December 2017 Inductors for high frequency circuits Multilayer ceramic MLG series (for automotive) MLG1005S 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/16) REMINDERS FOR USING THESE
More informationMLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015
December 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLG Series (For automobiles) MLG1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] Caution Nov.4, 2015 Dec.29, 2016 Jan.30, 2017 (2/12)
More informationMLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015
January 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series (For automobiles) MLK1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before
More informationJuly Inductors for High Frequency. Multilayer Ceramic. MLG series. * Dimensions Code JIS[EIA]
July 2013 Inductors for High Frequency Multilayer Ceramic MLG series MLG0603S MLG1005S MLG1608 0603 [0201 inch]* 1005 [0402 inch] 1608 [0603 inch] * Dimensions Code JIS[EIA] (1/23) REMINDERS FOR USING
More informationFebruary Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0402P Type. * Dimensions Code JIS[EIA]
I N D U C T O R S February 2017 Inductors for High Frequency Circuits Multilayer Ceramic MLG-P Series MLG0402P 0402 [01005 inch]* * Dimensions Code JIS[EIA] (2/16) REMINDERS FOR USING THESE PRODUCTS Before
More informationJanuary Multilayer Low Pass Filter. For MHz DEA101990LT-6302B1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s January 2016 Multilayer Low Pass Filter For 1710-1990MHz 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 1710-1990MHz Conformity to RoHS Directive
More informationFebruary Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0603P Type. * Dimensions Code JIS[EIA]
I N D U C T O R S February 2017 Inductors for High Frequency Circuits Multilayer Ceramic MLG-P Series MLG0603P 0603 [0201 inch]* * Dimensions Code JIS[EIA] (2/17) REMINDERS FOR USING THESE PRODUCTS Before
More informationInductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF series Type: CLF7045 (6.9x7.2 mm) CLF0040 (9.7x0.0 mm) Issue date: September 202 (/4) Inductors for Power Circuits Wound/STD Magnetic Shielded
More informationNovember Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS Before using
More informationNovember Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series (for automotive) MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS
More informationC Series Mid Voltage Application
C Series Mid Application Type: C1005 [EIA CC0402] C1608 [EIA CC0603] C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] C5750 [EIA CC2220] Issue date: April 2011 TDK MLCC US Catalog
More informationSeptember Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-Q, MLG-Pseries. * Dimensions Code JIS[EIA]
September 2014 Inductors for High Frequency Circuits Multilayer Ceramic MLG-Q, MLG-Pseries MLG0402P MLG0402Q MLG0603P 0402 [01005 inch]* 0402 [01005 inch] 0603 [0201 inch] * Dimensions Code JIS[EIA] (2/38)
More informationElectromagnetic Buzzers
Electromagnetic Buzzers Pin terminal Without oscillator circuit SD series Issue date: February 2013 Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium,
More informationNov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
More informationApril Multilayer Phase Shifter (Delay Line) For MHz DEA101910DT-6016A1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s April 2015 Multilayer Phase Shifter (Delay Line) For 1710-1910MHz 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA] Multilayer Phase Shifter (Delay Line) For 1710-1910MHz Conformity
More informationSPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF ROHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF-14871365 ROHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
More informationJune 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM
June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM-0902094710 Application: GSM 900 Duplexer ISSUED CHECKED CHECKED
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF-10300024 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 6/04/04 ** 5/13/2010 SRJ 5/13/2010
More informationFrelTec GmbH. Multilayer Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Multilayer Ceramic Chip Inductors SMD 10/12/2010 1/12 Freltec GmbH www.freltec.com SPECIFICATION Part Number 090 02 * 101 * J * T04 Type Size Value Tolerance
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-10000064 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 1/31/11 DS
More informationSPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-22505105 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 7/6/07**
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
More informationInput Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.
END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional
More informationMCF3 DC86V11CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: Cover: Terminal substrate metal: Terminal primary plating: Terminal surface plating: Adhesive: Marking: Ceramic Ceramic Copper t=0.1 mm Nickel plated copper,
More informationFrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
More informationType TDL Solid Tantalum Capacitors
Dipped, Radial Leaded, Solid Tantalum Capacitors Specifications Capacitance Range: Voltage Range: Tolerance: Operating Temperature Range: The Type TDL, like the Type TDC, is a low cost alternative to molded
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503 Revision Made: ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
More informationANT025020LCT1575MA1. Multilayer Antenna (Triple Band type) For MHz / MHz / MHz. 2.5x2.0mm [EIA 1008]* September 2016
R F C o m p o n e n t s September 216 Multilayer Antenna (Triple Band type) For 1574-1577MHz / 24-2484MHz / 515-585MHz ANT252LCT1575MA1 2.5x2.mm [EIA 18]* * Dimensions Code JIS[EIA] Multilayer Antenna
More informationMCF3 25CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: End-cap substrate metal: End-cap primary plating: End-cap surface plating: Adhesive: Marking: Ceramic Copper t=0.25 mm Nickel plated, 0.5 μm or more Tin
More informationPackaging (1) Package
Features Switching Regulator RoHS / conform (% lead free) High reflow temperature SMD package Adjustable output voltage Short circuit protection, thermal shutdown Remote ON/OFF control very low shutdown
More informationOct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-14200604 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS
More informationDesign number. RC filtering circuit for USB interface
hip R Networks hip R Networks Type: EZDLU n Features. Smallest SMD R/ filter for USB interface l Including 2 circuits of p type R/ filter in a chip (hip size:3.2 mm.6 mm ) l Space saving and low placing
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF DOCUMENT CHECKED 9/28/11 DS 12/01/2011 TFG 12/01/2011 GL
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-32002005 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN DOCUMENT CHECKED
More informationLead-free glass Nickel plated brass Ceramic Tin plated copper Sn-1.5Cu Pb87.5-Sn10.0-Ag2.5* SOC NSD9 D32V [rated current]
* RoHS Dimensions and construction: (mm) Tube: End-cap: Core: Lead wire: Solder: Marking: Lead-free glass Nickel plated brass Ceramic Tin plated copper Sn-1.5Cu Pb87.5-Sn10.0-Ag2.5* SOC NSD9 D32V [rated
More information0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
More informationPressure sensor with built-in amplification and temperature compensation circuit
sensor with built-in amplification and temperature compensation circuit PS-A PRESSURE SENSOR (built-in amplification and temperature compensating circuit) NEW FEATURES 1. Contains built-in amplification
More informationonlinecomponents.com
lamp Filters (Ferrite ore with ase) For cable ZT series Type: Issue date: ZT ZT- ZT- ZT-/-T June 202 ll specifications are subject to change without notice. onformity to RoHS irective: This means that,
More informationCRYSTAL OSCILLATOR DSA321SDA MHz 1XTV20000CAA RECEIPT. Serial No. : A DATE : 2009/10/16 ITEM : TYPE : NOMINAL FREQUENCY : SPEC No.
Serial No. : 2009-0602A DATE : 2009/10/16 ITEM : CRYSTAL OSCILLATOR TYPE : NOMINAL FREQUENCY : SPEC No. : DSA321SDA ---------------------------------------------------------------------------------------------------------------------------------
More informationContact: Customer Service Phone: Fax: esales.electrocube.com Website:
Supplier: Electrocube, Inc., 3366 Pomona Blvd., Pomona, California 91768 Contact: Customer Service Phone: 909-595-4037 Fax: 909-595-0186 Email: esales..com Website: www..com Date: 01/02/13 Quality Assurance
More informationFeatures. Isolation PFM. Block Diagram
Features SMT Technology 2:1 Input Range Efficiency up to 85 I/O Isolation 00 Remote on/off Control Short Circuit Protection MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
More informationDAISHINKU CORP. 1. Device Name TCXO 2. Model Name DSB321SDA 3. Nominal Frequency MHz 4. Mass 0.03g max. 5. Absolute Maximum Ratings
1. Device Name TCXO 2. Model Name DSB321SD 3. Nominal Frequency 26.000 MHz 4. Mass 0.03g max. 5. bsolute Maximum Ratings Item Symbol Rating unit 1 Supply Voltage V CC -0.3 ~ +6.0 V 2 Storage Temperature
More informationFeatures. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,
More informationMULTILAYER CERAMIC CHIP CAPACITORS
April 2018 Commercial grade, Soft termination (Low resistance type) CNC series CNC5 CNC6 3216 [1206 inch] 3225 [1210 inch] * Dimensions code: JIS[EIA] (2/6) REMINDERS FOR USING THESE PRODUCTS Before using
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
More informationCRYSTAL OSCILLATOR
Serial No. : 20160181 DATE : ITEM : CRYSTAL OSCILLATOR TYPE : NOMINAL FREQUENCY : SPEC No. : DSB321SDN 14.7456MHz 1XTW14745MDA RECEIPT DATE RECEIVED (signature) (name) General Manufacture of Quartz Devices
More informationApril Multilayer Directional Coupler. For MHz HHM2220SA3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s April 2015 Multilayer Directional Coupler For 1920-1980MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Directional Coupler For 1920-1980MHz Conformity to RoHS Directive
More informationSinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationSpecification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationNo. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
More informationPP1199FB-TR. Standard Product Reference Sheet. Features. Recommended Applications
Standard Product Reference Sheet Features Package Product features Smaller, thinner, right angle (side view) package, Visible ray cut resin Photo diode (Photo detector) (Peak wavelength : 900nm) Outer
More informationDISCONTINUED CONTACT KEMET FOR EQUIVALENT REPLACEMENT
Dipped, Radial Leaded, Solid Tantalum Capacitors Specifications Capacitance Range: Voltage Range: Tolerance: Operating Temperature Range: DC Leakage: Capacitance Change imum: Reverse Voltage (Non-continuous):
More informationFeatures. Unregulated Converters. 2 Watt SIP7 Single and Dual Output RKZE. RKZE- _/_ Protection (4) Isolation Option (3) Single or Dual
Features Unregulated Converters Low cost 2W converter Industry standard SIP7 package 3kVDC or 4kVDC isolation options Single or dual outputs Short circuit protected (/P versions) EN62368-1 DC/DC Converter
More informationPlatinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751
Data Sheet 906125 Page 1/5 Platinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751 Design type PCS/PCF For temperatures from -50 to +150 C (-70 to +250 C) In accordance with DIN
More informationSPECIFICATION FOR APPROVAL
FEB 25, 2004 CERAMIC DIPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION FOR APPROVAL ITEM: CERAMIC DIPLEX FILTER PART NUMBER: CFD-122715756 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS Inc FEB 25,
More informationAutomotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
More informationMHz Filter
Applications Broadband tuners DOCSIS 3.0 gateways DOCSIS 3.0 cable modems SMP12D 3.00 x 3.00 x 1.22 mm Product Features Usable bandwidth 100 MHz High attenuation Balanced operation Small Size: 3.00 x 3.00
More informationTDK. SMD Inductor(Coils)(TDK) For signal line(wound) NLV Series NLV25. capasen.com. Recommended soldering conditions.
SMD Inductor(Coils)(TDK) For signal line(wound) NLV Series NLV25 Conformity to RoHS Directive FEATURES The product has good heat durability that withstands lead-free compatible reflow soldering conditions.
More informationWLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
More informationReference Only. Spec.No. JENF243H-0008M-01 P 1/ 14. Rated Current. Withstanding Voltage 20A 125V (DC) (DC) 250V (DC) 20A (DC) 20A 40V (DC) (DC) (DC)
Spec.No. JENF243H-0008M-01 P 1/ 14 SMD Block Type EMIFIL BNX02-01 Reference Specification 1.Scope This reference specification applies to SMD Block Type EMIFIL. 2.Part Numbering BN X 022-01 L Product ID
More informationCC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
More informationSPECIFICATION VOLTAGE REGULATOR PQ200WNA1ZPH
SPEC. No. ED-04Q048 ISSUE March 30, 2005 OPTO-ELECTRONIC DEVICES DIVISION ELECTRONIC COMPONENTS GROUP SHARP CORPORATION SPECIFICATION DEVICE SPECIFICATION FOR VOLTAGE REGULATOR MODEL No. PQ200WNA1ZPH Specified
More informationOctober Circulator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Circulator SMD 5x5mm* * Dimensions Code JIS Circulator SMD Product compatible with RoHS directive Overview of PART NUMBER CONSTRUCTION CU4S0506 C - - Series name A
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
More informationLANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
More informationCYG Wayon Circuit Protection CO., LTD.
CATALOG (2014) CYG Wayon Circuit Protection CO., LTD. CONTENTS Surface Mount Fuses 1206F Series. 2 0603F Series.5 1206S Series.8 0603S Series.11 Applications..14 Product Identification...14 Reliability
More informationWLFI2012 Ferrite Chip Inductors
WLFI2012 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI2012 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationSinglFuse SF-1206HIxxxM Series Features
E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen
More informationApplications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
More informationRatings 0402 inch size : Type ERBRD ERBRD R X 0R25 0R3 0R37 0R50 0R75 R00 R25 R50 2R00 2R50 3R00 Rated Current (A)
Micro Chip Fuse Type: ERBRD Features Small size Fast-acting and withstanding in-rush current characteristics RoHS compliant Approved Safety Standards UL248-4 : File No.E94052 c-ul C22.2 No.248-4 : File
More informationMULTILAYER CERAMIC CHIP CAPACITORS
April 2018 Automotive grade, Soft termination (Low resistance type) CNA series CNA5 CNA6 3216 [1206 inch] 3225 [1210 inch] * Dimensions code: JIS[EIA] (2/6) REMINDERS FOR USING THESE PRODUCTS Before using
More informationApplications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More informationMULTILAYER CERAMIC CHIP CAPACITORS
August 2017 Automotive Grade, Soft Termination CGA series CGA2 CGA3 CGA4 CGA5 CGA6 CGA7 CGA8 CGA9 CGAD 1005 [0402 inch] 1608 [0603 inch] 2012 [0805 inch] 3216 [1206 inch] 3225 [1210 inch] 4520 [1808 inch]
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationOctober Isolator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Isolator SMD CU4S0506 Series 5x5mm* * Dimensions Code JIS Isolator SMD Product compatible with RoHS directive Overview of CU4S0506 Series PART NUMBER CONSTRUCTION CU4S0506
More informationSMD Wire Wound Chip Inductors / NLF TYPE(For Signal Line)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics. 3.Low DC resistance design is ideal for low loss. 4.RoHS compliant..applications: 1.Personal
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationSafety Standards. Model Number:
Highlights & Features RoHS Compliant Relay alarm indirection Built-in 2 channel DC OK signal Caused by rugged handing Conformal coating on PCBA to protect against chemical and dust pollutants Class I,
More information