Product Catalogue. northernstrands.com. Northern Strands is the largest supplier of rigging, towing and material handling products in Western Canada

Size: px

Start display at page:

Download "Product Catalogue. northernstrands.com. Northern Strands is the largest supplier of rigging, towing and material handling products in Western Canada"

Shana Alisha Carpenter
5 years ago
Views:

1 Our competitive advantage... Technically trained sales staff. We have the answers to your questions. Compliance certified equipment with documentation. Safe and approved for every job. Custom built products. i.e. material baskets, chain slings, wire rope slings and more. Canadian owned and operated since 1970 Product Catalogue Northern Strands is the largest supplier of rigging, towing and material handling products in Western Canada

2 1 Table of Contents 2 Welcome to Northern Strands 3 rigging 4 Wire rope slings 5 Wire rope sling CHRT 6 Web and Round slings 7 SHCKles 8 Rigging ccessories 9 Forged eye Bolts 10 Links 11 Thimbles 12 Turnbuckles 13 Malleable Clips and Heavy duty DRop forged clips 14 Wire Rope 15 Bright Steel Cable 16 Galvanized ircrft Cble 17 STinless Steel ircrft Cable 18 high PerfoRMNCe CRNe Ropes 19 CRNeMX L8K 20 CRNeMax XL35K 21 High performnce CRNe ropes 22 High performnce CRNe ropes NRHD 24-35x7 23 Lube & Lube Systems 24 Wire Rope & Cable 25 Chain and ccessories 26 grde 80 & 100 sling chain CHRTS 27 grde 100 Sling chain ConfiguRTions 29 grde 80 & 100 lloy Chain 31 grde 100 Links and Hooks 33 TRNSpoRT Chain and ccessories 34 Material Handling 35 Plain Trolley KW-II G geared Trolley KW-III 36 BeM ClMp TBC Quick instll Trolley QIT 37 Spreader bems 39 Hand Winch 40 Chain and Lever HoiSTS 41 Chain HoiSTS 43 Lever HoiSTS 45 Thern Power Winches Rail Car Pulling Winch 46 4WS Series 47 Series 4WS Worm/Spur Gear Power Winches 48 3WG4 Series 49 Series 3WG4 Worm Gear Power Winches 50 Series 4WP2D8 51 Series 4WP2D High Speed Worm Gear Power Winches 52 Series 4WP2 54 Series W40 Series Worm Gear Hand Winches 57 Thern Worm gear 58 Thern Worm gear Hand Winches 59 Thern Spur Gear 62 Thern ir Winches 71 Fall Protection Equipment 73 Synthetic Ropes STRND DyneeM Rope 75 Double brided PolyEster Tow Rope 76 8 STRND Tow Rope 77 3 STRND generl purpose poly rope 78 Tow STRps 79 Crosby Rigging Products 80 Crosby Hooks and Swivels 87 Crosby Rigging ccessories 90 Wire rope End fittings 99 SNTCH Blocks 100 eye Bolt - Regular 101 eye - Bolt Shoulder Machine 102 eye - Bolt Shoulder 103 SLeeves 104 SWge CuTTer Call or visit us today... TOLL FREE: EMIL: info@northernstrands.com WEBSITE:

3 2 Welcome to Northern Strands With health and safety in mind, Northern Strands has been supplying industry since 1970, evolving into five major divisions that offer needed tools and technical knowledge in mine hoisting and attachments, general rigging, engineered fall protection, suspended access and training. Northern Strands Mining, Wire Rope, ttachments & Equipment Division excels by providing a wide range of equipment and services, by being the best full service provider of wire ropes, attachments, equipment and service. Truly Mine Hoisting Solutions. Our Rigging Division is a full-service facility operating out of Saskatoon and Regina with the ability to fabricate custom chain and wire rope slings. We have a vast inventory of synthetic lifting slings, chain hoists, lever hoists, shackles, trolleys, winches (tuggers), and other general rigging hardware. Our network of suppliers and in-house expertise is leveraged for the benefit of our customers. We have Vertical and horizontal test bed services which we can use to certify that equipment is in compliance with applicable standards. The Engineered Fall Protection Division offers a variety of fall protection systems, solutions and services. Custom-engineered solutions can be designed to suit specific requirements. Services and equipment include: inspection and replacement services for overhead and vertical lifelines, consulting, supply and installation services for single point anchors, guardrail systems, walkways, platforms and structural assessments. Northern Strands has a large and diverse Suspended ccess Division. Our suspended access solutions have been used on sloped roof buildings, glazing applications, sheeting, insulation and concrete restoration, surface and underground in the mining sector along with many other uses throughout Saskatchewan and Western Canada. ll of our equipment goes through a rigorous inspection and recertification process each time before it leaves our shop to ensure that our equipment will provide the most dependable solution for your needs. We provide onsite technical assistance with all suspended access rigging and setup ranging from simple to highly engineered set-ups. Northern Strands offers a multitude of safety training courses for construction, mining and agriculture industries. We have the ability to provide flexible on-site training. Please call us to discuss booking training for dates that are not listed in our online calendar. Our seminars are taught by knowledgeable and experienced instructors who hold several accreditations from industry leaders such as Crosby, Capital Safety, Honeywell, International Critical Incident Stress Foundation and Occupational Health and Safety. The Courses offered are: Fall arrest, Overhead Crane, Crosby Rigging, Tugger Safety, Wirelock Socketing, Suspended ccess Equipment and General Mine Safety wareness training. Northern Strands Training Seminars offer the most up-to-date information on the topics they discuss, and can be delivered on a tight schedule with courses like Tugger Safety and Fall rrest averaging four hours in duration to more extensive programs such as the 40 hour Overhead Crane course which can be completed in four 10 hour days or five 8 hour days. Northern Strands is able to accommodate this training seminar on-site, provided a suitable work area is available, or at one of Northern Strands facilities. Northern Strands Certifications and ssociations: COR Safety certified, ISNET, Mission Zero Charter Member, Canadian Dam ssociation Sustaining Member, WRF, SI Call or visit us today... TOLL FREE: EMIL: info@northernstrands.com WEBSITE:

4 Rigging

4 Wire rope Slings (standard Flemish eye each end) Wire Rope

for heavy loads and rugged conditions Flexible and abrasion

3/8" 6x26 2,400 lbs 4, 6, 8, 10, 12, 14 Ft.

5/8" 6x26 6,800 lbs 4, 6, 8, 10, 12, 14, 16, 20 Ft.

7/8 6x36 13,200 lbs 6, 8, 10, 12, 16, 20 FT.

1-1/8" 6x36 20,000 lbs 8, 10, 12, 16, 20 Ft.

5 4 Wire rope Slings (standard Flemish eye each end) Wire Rope Sling Features: Lowest cost per ton of lift of all slings Ideal for heavy loads and rugged conditions Flexible and abrasion resistant Wide range of possible end terminations Cable Size Cable Construction W.L.L. (Vertical) Length 1/4" 6x26 1,120 lbs 4, 6, 8, 10 Ft. 3/8" 6x26 2,400 lbs 4, 6, 8, 10, 12, 14 Ft. 1/2" 6x26 4,400 lbs 4, 6, 8, 10, 12, 14, 20 Ft. 5/8" 6x26 6,800 lbs 4, 6, 8, 10, 12, 14, 16, 20 Ft. 3/4" 6x26 9,800 lbs 6, 8, 10, 12, 16, 20 Ft. 7/8 6x36 13,200 lbs 6, 8, 10, 12, 16, 20 FT. 1" 6x36 17,000 lbs 6, 8, 10, 12, 16, 20 Ft. 1-1/8" 6x36 20,000 lbs 8, 10, 12, 16, 20 Ft. 1 3/8 6x36 30,000 lbs 8, 12, 16, 20 FT. 1-1/4" 6x36 26,000 lbs 8, 10, 12, 16, 20 Ft. 1-1/2" 6x36 36,000 lbs 8, 10, 12, 14, 16, 20 Ft. Larger Sizes & Lengths vailable Upon Request. Other Configurations lso vailable. W.L.L. based on IPS cable

Sling Selection Reference Chart Wire rope Slings 5 www.northernstrands.

Vertical Hitch Basket 30 45 60 Vertical 30 45 60 B 1/4 1120 820 2200 1120 1580 1940 3400 1680 2400 3000 2 4 5/16 1740 1280 3400 1740 2400 3000 5200 2600 3600 4600 2-1/2 5 3/8 2400 1840 5000 2400 3600

11600 14400 4-1/2 9 5/8 6800 5000 13600 6800 9600 11800 20000 10200 14400 17600 5 10 3/4 9800 7200 19400 9800 13800 16800 30000 14600 20000 26000 6 12 7/8 13200 9600 26000 13200 18600 22000 40000

44000 78000 38000 54000 66000 10 20 1-3/8 30000 24000 62000 30000 44000 54000 92000 46000 66000 80000 11 22 1-1/2 36000 28000 74000 36000 52000 64000 110000 54000 78000 96000 12 24 1-5/8 42000 32000

16 32 2-1/4 78000 60000 154000 78000 110000 134000 232000 116000 164000 202000 18 36 2-1/2 94000 74000 188000 94000 134000 164000 282000 142000 200000 246000 20 40 2-3/4 114000 88000 226000 114000

6 Sling Selection Reference Chart Wire rope Slings 5 RTED CPCITY IN POUNDS Basket and 3 Leg Bridles 2 Leg Bridles Eye Dimensions (pproximate) Width Inches Length Inches Choker Vertical Diam. Vertical Hitch Basket Vertical B 1/ / /2 5 3/ / /2 7 1/ / /2 9 5/ / / / / / / / / / / / ttach this chart to wall for easy reference. NOTE: DESIGN FCTOR = 5 : 1 WRNING: DO NOT EXCEED RTED CPCITIES Rated capacities basket hitch based on D/d ratio of 25 Rated capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter Horizontal sling angles less than 30 degrees shall not be used Rated capacities shown apply only to 6 x 19 and 6 x 37 Improved Plow Steel IWRC classification wire rope WRNING! Wire Rope WILL FIL if worn-out, overloaded, misused, damaged, improperly maintained or abused. Wire rope failure may cause serious injury or death! Protect yourself and others. LWYS INSPECT wire rope for WER, DMGE or BUSE BEFORE USE. NEVER USE wire rope that is WORN-OUT, DMGED or BUSED, NEVER OVERLOD a wire rope. INFORM YOURSELF: Read and understand manufacturer s literature or Wire Rope and Wire Rope Sling Safety Bulletin. REFER TO PPLICBLE CODES, STNDRDS and REGULTIONS for INSPECTION REQUIREMENTS and REMOVL CRITERI *For additional information or the BULLETIN, ask your employer or wire rope supplier. Flemish Eye Splice Call us about all of your material handling and rigging needs. Saskatoon P (306) Millar venue Saskatoon SK. S7K 5Y3 FX: (306) Regina P (306) Henderson Drive Regina SK. S4N 68 FX: (306) TOLL FREE:

6 Web & round Slings Product listing UNITEX BRND SUPPLIED BY NORTHERN STRNDS.

6400lbs Vertical 3 2 ply from 4 up to 20 WLL 8600lbs Vertical 4 2 ply from 4 up to 20 WLL

ll eyes have a protective covering. ll eyes are tapered. Endless web slings.

Vertical WLL, Green sleeve, up to 20 9,000lbs Vertical WLL, Yellow sleeve, up to 20 12,000lbs

Vertical WLL, Brown, up to 20 21,000lbs Vertical WLL, Blue, up to 20 23,000lbs Vertical WLL,

40,000lbs Vertical WLL, Orange, up to 20 54,000lbs Vertical WLL, Brown, up to 20 68,000lbs

7 6 Web & round Slings Product listing UNITEX BRND SUPPLIED BY NORTHERN STRNDS. Polyester Web Slings 1 2 ply from 3 up to 12 WLL 3200lbs Vertical 2 2 ply from 2 up to 20 WLL 6400lbs Vertical 3 2 ply from 4 up to 20 WLL 8600lbs Vertical 4 2 ply from 4 up to 20 WLL 11500lbs Vertical ll other sizes and configurations available upon request. ll eyes have a protective covering. ll eyes are tapered. Endless web slings. Polyester Round Slings (Double Sleeved) 3,000lbs Vertical WLL, Purple sleeve, up to 20 6,000lbs Vertical WLL, Green sleeve, up to 20 9,000lbs Vertical WLL, Yellow sleeve, up to 20 12,000lbs Vertical WLL, Tan sleeve, up to 20 14,000lbs Vertical WLL, Red sleeve, up to 20 17,000lbs Vertical WLL, Brown, up to 20 21,000lbs Vertical WLL, Blue, up to 20 23,000lbs Vertical WLL, Blue, up to 20 26,000lbs Vertical WLL, Orange, up to 20 32,000lbs Vertical WLL, Grey, up to 20 40,000lbs Vertical WLL, Orange, up to 20 54,000lbs Vertical WLL, Brown, up to 20 68,000lbs Vertical WLL, Olive, up to 20 90,000lbs Vertical WLL, Black, up to 20 Other sizes and lengths available upon request. ll round slings have hidden I.D. tag. Up to 9,000lbs

7 Shackles Screw Pin nchor Bow Shackle Federal Specification

aprox. Forged Quenched and Tempered, lloy Pins.

) Working Load Limit (tonne) 3/16 1/3 1/4 1/2 5/16 3/4 3/8 1 7/16

1-3/8 13-1/2 1-1/2 17 1-3/4 25 2 35 2-1/2 55 Safety nchor Bow Shackle

Galvanized, dimensions To assure traceability, Yellow Pin shackles

) Working Load Limit (tonne) 1/4 1/2 5/16 3/4 3/8 1 7/16 1-3/8 13-1/2

Nominal size (in.) Working Load Limit (lbs.

8 7 Shackles Screw Pin nchor Bow Shackle Federal Specification RR-C-271D, Type IV, Grade, Class 2 (6:1 WLL) Galvanized, dimensions aprox. Forged Quenched and Tempered, lloy Pins. Meets or exceeds all requirements of SME B Nominal size (in.) Working Load Limit (tonne) 3/16 1/3 1/4 1/2 5/16 3/4 3/8 1 7/16 1-1/2 1/2 2 5/8 3-1/4 3/4 4-3/4 7/8 6-1/ /2 1-1/8 9-1/2 1-1/ /8 13-1/2 1-1/ / /2 55 Safety nchor Bow Shackle Federal Specification RR-C-271D, Type IV, Grade, Class 3 (6:1 WLL) Galvanized, dimensions aprox. Forged Quenched and Tempered, lloy Pins. To assure traceability, Yellow Pin shackles are embossed to exceed SME B30.26 requirements Nominal size (in.) Working Load Limit (tonne) 1/4 1/2 5/16 3/4 3/8 1 7/16 1-1/2 1/2 2 5/8 3-1/4 3/4 4-3/4 7/8 6-1/ /2 1-1/8 9-1/2 1-1/ /8 13-1/2 1-1/ / Long Reach Screw Pin Shackle Design factor of 5:1 Meets the requirements of SME B30.26 lloy Steel WLL forged on body Durable orange powder coated finish Nominal size (in.) Working Load Limit (lbs.) 5/8 7,000 3/4 10, , /4 28, /2 34, /4 50,000

9 Rigging CCESSORIES

10 9 Rigging ccessories Forged Eye Bolts Forged Steel - Quenched and Tempered. Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles. ll Bolts Hot Dip galvanized after threading (UNC). Furnished with standard Hot Dip galvanized hex nuts. Recommended for in-line pull. Meet or exceeds all requirements of SME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by SME B G-291 Regular Nut Eye Bolt G-291 Regular Nut Eye Bolts * Shank Dia. & Length (in.) Working Load Limit (lbs.) * Weight Per 100 (lbs.) Dimensions (in.) B C D E F G H 1/4 x /4 x /16 x 2-1/ /16 x 4-1/ /8 x 2-1/ /8 x 4-1/ /8 x /2 x 3-1/ /2 x /2 x /2 x /2 x /8 x /8 x /8 x /8 x /8 x /4 x 4-1/ /4 x /4 x /4 x /4 x /4 x /8 x /8 x /8 x x x x x /4 x /4 x /4 x

11 10 41 Rigging ccessories Pear Shaped Links lloy Steel - Quenched and Tempered Individually Proof - Tested at 2 times Working Load Limit with certifications. Proof Test certification shipped with each link. Sizes 1/2, 5/8, 3/4, 7/8, 1, 1-1/2, and 1-3/8 are forged lloy Pear Shaped Links -314 lloy Pear Shaped Links * Working Load Limit Dimensions (in.) Size () (in.) (lbs.)* (t) Weight Each (lbs.) B C F 1/ / / / / / / / / / / / / / / / S-341 Weldless Sling Link Forged carbon steel - Quenched and Tempered Self coloured or Hot Dip galvanized. G-341 / S-341 Weldless Sling Links * Working Load Limit Single Pull (lbs.) * Weight Each (lbs.) G-341 / S-341 Weldless Sling Link Dimensions (in.) Size () (in.) B C F 3/ / / / / / /

11 Thimbles Light Duty Thimbles Rope Size

5 lbs 1/4" 3.5 lbs 5/16" 4.0 lbs 3/8" 6.

9 lbs 1-1/8"-1-1/4" 400 lbs 1 1/4"-1-3/8"

2" 2,775 lbs Stainless Steel Thimbles Light

12 11 Thimbles Light Duty Thimbles Rope Size Weight (100 pcs.) 1/8" 3.5 lbs 3/16" 3.5 lbs 1/4" 3.5 lbs 5/16" 4.0 lbs 3/8" 6.7 lbs 1/2" 12.5 lbs 5/8" 34.5 lbs 3/4" 47.1 lbs 7/8" 84.6 lbs 1" 97.5 lbs Heavy Duty Thimbles Rope Size Weight (100 pcs.) 1/4" 6.5 lbs 5/16" 11.8 lbs 3/8" 21.6 lbs 7/16" 34.7 lbs 1/2" 51 lbs 9/16" 51 lbs 5/8" 75.7 lbs 3/4" 158 lbs 7/8" 177 lbs 1" lbs 1-1/8"-1-1/4" 400 lbs 1 1/4"-1-3/8" 811 lbs 1-1/2" 1,295 lbs 1-3/4" 1,775 lbs 2" 2,775 lbs Stainless Steel Thimbles Light Duty Rope Size Weight (100 pcs.) 1/16" 0.5 lbs 1/8" 0.75 lbs 3/16" 1.0 lbs Rope Size Heavy Duty Weight (100 pcs.) 1/4" 6.5 lbs 5/16" 11.8 lbs 3/8" 21.6 lbs 1/2" 51 lbs 5/8" 75.7 lbs 3/4" lbs

12 Forged Yellow End TM Turnbuckles Turnbuckles End fittings are quenched and tempered, bodies heat treated by normalizing.

26 Ends painted Yellow for quick recognition Sizes 1/4 through 1/2 c/w nut & bolt, sizes 5/8 through 2-3/4 c/w pin & cotter ll sizes provided with Lock Nuts Turnbuckle Jaw & Jaw Galvanized.

Conforms to Federal Specification FF-T-791B, Type 1, Form 1 Class 4 Turnbuckle Stub End Self Colored, Conforms to Federal Specification FFT-T-791B, Type 1, Form 1 Class 3 Size WLL (lbs.

13 12 Forged Yellow End TM Turnbuckles Turnbuckles End fittings are quenched and tempered, bodies heat treated by normalizing. Hot dip Galvanized Steel Embossed with OCEN, size and product identification for traceability to meet SME B30.26 Ends painted Yellow for quick recognition Sizes 1/4 through 1/2 c/w nut & bolt, sizes 5/8 through 2-3/4 c/w pin & cotter ll sizes provided with Lock Nuts Turnbuckle Jaw & Jaw Galvanized. Conforms to Federal Specification FF-T-791B and STM F1145,Type 1, Form 1 Turnbuckle Eye & Eye Galvanized. Conforms to Federal Specification FF-T-791B, Type 1, Form 1 Class 4 Turnbuckle Stub End Self Colored, Conforms to Federal Specification FFT-T-791B, Type 1, Form 1 Class 3 Size WLL (lbs.) open length closed length 1/4" x 4" " 7.9" 5/16" x 4 1/2" " 9.4" 3/8" x 6" 1, " 11.4" 1/2" x 6" 2, " 13.0" 1/2" x 9" 2, " 16.0" 1/2" x 12" 2, " 19.0" 5/8" x 6" 3, " 14.9" 5/8" x 9" 3, " 17.9" 5/8" x 12" 3, " 20.9" 3/4" x 6" 5, " 16.6" 3/4" x 9" 5, " 19.6" 3/4" x 12" 5, " 22.6" 3/4" x 18" 5, " 28.6" 1" x 6" 10, " 20.1" 1" x 12" 10, " 26.1" 1"x 18" 10, " 32.1" 1" x 24" 10, " 38.1" Size WLL (lbs.) open length closed length 5/16" x 4-1/2" " 9.62" 3/8" x 6" 1, " 12.16" 1/2" x 6" 2, " 13.96" 1/2" x 9" 2, " 16.96" 1/2" x 12" 2, " 19.08" 5/8" x 6" 3, " 15.68" 5/8" x 9" 3, " 18.68" 5/8" x 12" 3, " 21.68" 3/4" x 9" 5, " 20.62" 3/4" x 12" 5, " 23.62" 7/8" x 12" 7, " 24.82" 1" x 12" 10, " Size WLL (lbs.) overll length 1/2" x 6" 2,200 16" 5/8" x 6" 3,500 16" 3/4" x 6" 5,200 17" 7/8" x 6 7,200 18" 1" x 6" 10,000 19" 1-1/4" x 6" 15,200 20" 1-1/2" x 12" 21, "

13 Stainless steel, malleable and heavy duty drop forged clips To be used for light

Typical uses includes guard line and fencing, Federal Specifications FF-C-450, Type

Forged Wire Rope Clip Meets Federal Specification FF-C-450, Type 1 Class 1.

size to meet SME B30.26 Entire clip galvanized with powder coated Yellow U-Bolt.

Stainless steel clips Rope Size malleable clips (Light Duty) Rope Size Weight (100

7 lbs 1/2 45 lbs Weight (100 pcs.) 1/8" 4 lbs 3/16" 6.

125 lbs 1" 166 lbs drop forged clips (Heavy Duty) Rope Size Weight (100 pcs.

14 13 Stainless steel, malleable and heavy duty drop forged clips To be used for light Duty, NON CRITICL applications only. Typical uses includes guard line and fencing, Federal Specifications FF-C-450, Type 1 Class 2. Forged Wire Rope Clip Meets Federal Specification FF-C-450, Type 1 Class 1. Each base has product identification code for material traceability, the name OCEN & size to meet SME B30.26 Entire clip galvanized with powder coated Yellow U-Bolt. Only genuine OCEN clips have yellow U-Bolt for instant recognition. Stainless steel clips Rope Size malleable clips (Light Duty) Rope Size Weight (100 pcs.) 1/8 2.4 lbs 3/16 4 LBS 1/4 6.8 lbs 5/ lbs 3/ lbs 1/2 45 lbs Weight (100 pcs.) 1/8" 4 lbs 3/16" 6.3 lbs 1/4" 13 lbs 5/16" 15 lbs 3/8" 21 lbs 1/2" 37 lbs 5/8" 59 lbs 3/4" 84 lbs 7/8" 125 lbs 1" 166 lbs drop forged clips (Heavy Duty) Rope Size Weight (100 pcs.) 1/8" 6 lbs 3/16" 10 lbs 1/4" 20 lbs 5/16" 30 lbs 3/8" 47 lbs 1/2" 80 lbs 9/16" 104 lbs 5/8" 106 lbs 3/4" 150 lbs 7/8" 212 lbs 1" 260 lbs 1-1/8" 290 lbs 1-1/4" 430 lbs 1-1/2" 540 lbs 1-3/4" 925 lbs 2" 1,300 lbs 2-1/4" 1,540 lbs 2-1/2" 1,980 lbs 2-3/4" 2,200 lbs 3" 3,080 lbs 3-1/2" 3,960 lbs

15 Wire ROPE

1-1/8" 6x26 130,000 6x36 Rope Size Const. M.B.S. (lbs.

16 15 Bright Steel Cable Bright Steel (IWrc) General Purpose RRL Wire Rope 6x26 Rope Size Const. M.B.S. (lbs.) 3/8" 6x26 15,100 7/16" 6x26 20,400 1/2" 6x26 26,600 9/16" 6x26 33,600 5/8" 6x26 41,200 3/4" 6x26 58,800 7/8" 6x26 79,600 1" 6x26 103, /8" 6x26 130,000 6x36 Rope Size Const. M.B.S. (lbs.) 3/8" 6x36 15,100 7/16" 6x36 20,400 1/2" 6x36 26,600 9/16" 6x36 33,600 5/8" 6x36 41,200 3/4" 6x36 58,800 7/8" 6x36 79,600 1" 6x36 103, /8" 6x36 143, /4" 6x36 175, /8" 6x36 212,000 Custom lengths available from 1ft to 5000ft continuous.

16 Galvanized ircraft Cable Galvanized ircraft Cable (7x7, 7x19 IWrc RL) 7x7 Rope Size ll aircraft cable can be cut to custom lengths, starting at 1ft. Break Strength (lbs.) Const.

17 16 Galvanized ircraft Cable Galvanized ircraft Cable (7x7, 7x19 IWrc RL) 7x7 Rope Size ll aircraft cable can be cut to custom lengths, starting at 1ft. Break Strength (lbs.) Const. 1/16" 480 lbs 7x7 3/32" 920 lbs 7x7 7x19 Rope Size Break Strength Const. 1/8" 2,000 lbs 7x19 5/32" 2,800 lbs 7x19 3/16" 4,200 lbs 7x19 1/4" 7,000 lbs 7x19 5/16" 9,800 lbs 7x19 3/8" 14,000 lbs 7x19

17 Stainless steel ircraft Cable Stainless Steel ircraft Cable (7x7, 7x19 IWrc RL) Rope Size Break Strength (lbs.) Const. 7x7 7x19 For corrosive environments. Water use. dverse weather.

18 17 Stainless steel ircraft Cable Stainless Steel ircraft Cable (7x7, 7x19 IWrc RL) Rope Size Break Strength (lbs.) Const. 7x7 7x19 For corrosive environments. Water use. dverse weather. ny conditions where long term durability is required. 1/16" 480 7x7 3/32" 920 7x7 1/8" 1,700 7x19 5/32" 2,400 7x19 3/16" 3,700 7x19 1/4" 6,400 7x19 5/16" 9,000 7x19 3/8" 12,000 7x19 Custom lengths available from 1ft to 5000ft continuous.

18 HIGH performance crane ropes 6-Strand Hoist Rope to Suit European Overhead Cranes 8-Strand European Style Hoisting Rope to Suit Demag Ovrehead Cranes 6x36 Not

27 8x19 Not Dyformed Not Galvanized Rope DiMeter MM Minimum Breaking Strength kn Weight Kg Per Meter 6.5 24.8 0.10 7.5 37.3 0.16 8 42.3 0.27 9 53.8 0.34 9 53.4 0.

19 18 HIGH performance crane ropes 6-Strand Hoist Rope to Suit European Overhead Cranes 8-Strand European Style Hoisting Rope to Suit Demag Ovrehead Cranes 6x36 Not Dyformed Not Galvanized 6 x 19 Constuction Rope DiMeter MM Minimum Breaking Strength kn Weight Kg Per Meter x19 Not Dyformed Not Galvanized Rope DiMeter MM Minimum Breaking Strength kn Weight Kg Per Meter

20 19 Cranemax L8K Special Hoist

21 20 Cranemax XL35K Rotation Resistant

22 21 High Performance Crane Ropes 8 x 36 IWrc Ultra Strength 8-Strand Ordinary Lay - Galvanized (ISO Class B) Ultra Strength Steel 2160 MPa 8x 36 Not Dyformed Not Galvanized Rope DiMeter MM Minimum Breaking Strength kn Weight Kg Per Meter x19 SIG Not Dyformed Not Galvanized Rope DiMeter MM Minimum Breaking Strength kn Weight Kg Per Meter 6.4/ x 25 IWrc 8-FIG Not Dyformed Not Galvanized Rope DiMeter MM Minimum Breaking Strength kn Weight Kg Per Meter

23 22 High Performance Crane Ropes NRHD x 7 Dyformed Galvanized Ordinary Lay - Galvanized Ultra Strength Steel 2160 Mpa NRHD24 (7 Wires of 84 Outer Wires) Rope DiMeter MM Minimum Breaking Strength kn Weight Kg Per Meter 7.0/ x 17 Dyformed Galvanized Ordinary Lay - Galvanized NRHD24 (17 Wires of 204 Outer Wires) Rope DiMeter MM Minimum Breaking Strength kn Weight Kg Per Meter High Performance Crane Ropes 35 x 7 HP-28 Dyformed Galvanized Ordinary Lay - Galvanized Ultra Strength Steel 2160 Mpa Construction 28 x 7 Notor HP Rope DiMeter MM Minimum Breaking Strength kn Weight Kg Per Meter HP-32 Dyformed Galvanized 35 x 7 Class - Construction: 32 x 7 Notor HP Rope DiMeter MM Minimum Breaking Strength kn Weight Kg Per Meter

24 Lube & LUBE SYSTEMS

24 Wire Rope & Cable t Northern Strands we know first-hand the importance of wire rope lubrication.

Different hoists and applications require different types of lubrication.

With Northern Strands knowledge of wire rope, we can recommend and supply appropriate lubrication products and suggest the best

25 24 Wire Rope & Cable t Northern Strands we know first-hand the importance of wire rope lubrication. It is required during manufacturing, installation, and ongoing maintenance. Different hoists and applications require different types of lubrication. We carry everything from basic asphalt lube to soap grease and no- petroleum based lubes. With Northern Strands knowledge of wire rope, we can recommend and supply appropriate lubrication products and suggest the best lubrication methods. Types of product and equipment we supply lube and lube systems for: Tower cranes Overhead traveling cranes Construction and industrial wire rope Mining surface ropes Drum and slope hoist ropes Progressioner rope Plus many more types of products and equipment. Contact us to inquire about the correct lubrication for your product or equipment.

26 Chain ND CCESSORIES

27 26 Grade 80 & 100 sling Chain Charts Grade 80 Chain Slings Working Load Limits In Pounds* SIZE OF CHIN TYPES OR C DOUBLE BRNCH TYPE D INCHES MM. POUNDS LIFT WHEN USED SINGLE POUNDS LIFT WHEN USED T 60 NGLE NOTE: DESIGN FCTOR = 4 : 1 POUNDS LIFT WHEN USED T 45 NGLE POUNDS LIFT WHEN USED T 30 NGLE TRIPLE/QUD 60 NGLE WRNING: DO NOT EXCEED RTED CPCITIES Grade 100 Chain Slings Working Load Limits In Pounds* SIZE OF CHIN TYPES OR C DOUBLE BRNCH TYPE D INCHES MM. POUNDS LIFT WHEN USED SINGLE POUNDS LIFT WHEN USED T 60 NGLE NOTE: DESIGN FCTOR = 4 : 1 POUNDS LIFT WHEN USED T 45 NGLE POUNDS LIFT WHEN USED T 30 NGLE TRIPLE/QUD 60 NGLE WRNING: DO NOT EXCEED RTED CPCITIES TRIPLE/QUD 45 NGLE TRIPLE/QUD 45 NGLE WRNING IMPROPER USE ND CRE OF CHIN SLINGS CN RESULT IN BODILY INJURY. TO VOID INJURY: NEVER EXCEED THE WORKING LOD LIMIT. PROTECT CHIN FROM SHRP CORNERS ND OBJECTS. LWYS INSPECT SLING BEFORE ECH USE. PROTECT SLINGS FROM CORROSION. DO NOT IMPCT LOD OR JERK THE SLING. Use Use TRIPLE/QUD 30 NGLE TRIPLE/QUD 30 NGLE Observing the following precautions when using chain slings will help protect both operators and materials. 1. Inspect chain slings before use as indicated in inspection section. 2. Do not exceed working load limit as indicated on sling identification tag. ny of the following factors can lower the load the chain will hold: Rapid load application can produce dangerous overloading. Variation in the angle of the load to the sling. s the angle decreases, the working load of the sling will decrease. Refer to Working Load Limit Chart. Twisting, knotting and kinking subjects links to undesirable loading which decreases the working load limit of the sling. Conditions other than that for which slings are intended can reduce the working load limit of the sling. For example, use at elevated temperatures will result in a reduction in working limit. 3. Free all twists, knots and kinks. 4. Center load in hook(s). Hook latches must not support load. 5. void sudden jerks when lifting and lowering. 6. Balance all loads, avoid tipping of loads. 7. Use pads around sharp corners. 8. Don t drop load on chairs. 9. Select attachments such as hooks or rings for use with chain to match the size and working load limit of the chain. 10. Use only GR. 80 and 100 lloy Chain. The identification tag is found on the master coupling link of each chain sling and contains the following information: Grade Size Reach Type Working Load Limit (at a specific angle of lift) Serial Number Care Chain slings require proper care as follows: 1. Store slings on an Frame in a clean, dry place. 2. void corrosion. Oil chains before prolonged storage. 3. Never alter the thermal treatment of GR. 80 and 100 chain by heating. 4. Do not plate or change surface finish of sling. Contact Northern Strands for special requirements. Inspection It is important to inspect chain slings regularly and to keep a record of each chain inspection. The following is a guide for such an inspection procedure. Northern Strands will supply sling record cards or sheets as requested. Before inspecting, clean the chain sling so that marks, nicks, wear and other defects can be seen. Use a non-acid/non-caustic solvent. Each chain link and sling component should be individually inspected for the following conditions: 1. Twists or bends. 2. Nicks or gouge. 3. Excessive wear at bearing points. Refer to Wear llowance Chart. 4. Stretch. 5. Distorted, worn or damaged master links, coupling links, or attachments, especially spread in throat opening of hooks. Each link or component having any condition listed above is to be marked with paint to plainly indicate rejection and eliminated from service until properly repaired. NOTE: Northern Strands and Manufacturer assume no responsibility for the misuse or misapplication of any of its products. Products are provided with the express understanding that the purchaser and/or user are thoroughly familiar with the correct application and proper use. Warnings and definitions are provided as an aid to the user in understanding correct application and proper use. Working Load Limit Refers to the maximum load (rated capacity) in pounds that shall be applied to the chain sling. Refer to Working Load Limit Chart. The manufacturer does not accept any liability for damages which result from the sling being used in excess of the working load limit or from abuse.

27 Grade 100 Chain Sling Configurations Type Description Type Description

Sling with Master Link and Sling Hook DOG Double Chain Sling with Master

DOS DOG DOCH Double Chain Sling with Master Link and Foundry Hook djustable

Sling with Master Link and Grab Hook Double with 1355 Choker TOF TOCH QOS

1355 Choker Quadruple Chain Sling with Master Link and Sling Hook Quadruple

28 27 Grade 100 Chain Sling Configurations Type Description Type Description DOS Double Chain Sling with Master Link and Sling Hook TOS Triple Chain Sling with Master Link and Sling Hook DOG Double Chain Sling with Master Link and Grab Hook Tog Triple Chain Sling with Master Link and Grab Hook DOF DOS DOG DOCH Double Chain Sling with Master Link and Foundry Hook djustable Double Chain Sling with Master Link and Sling Hook djustable Double Chain Sling with Master Link and Grab Hook Double with 1355 Choker TOF TOCH QOS QOG QOF Triple Chain Sling with Master Link and Foundry Hook Triple with 1355 Choker Quadruple Chain Sling with Master Link and Sling Hook Quadruple Chain Sling with Master Link and Grab Hook Quadruple Chain Sling with Master Link and Foundry Hook

28 Grade 100 Chain Sling Configurations To Make Your Grade 100 lloy Chain Sling: Follow these simple steps in making a sling assembly: 1. Determine the maximum load to be lifted by the sling assembly.

The decision must take into account the angle of the sling legs in multileg slings. 3. Determine the overall reach from bearing point of master link to bearing point on hook (see Fig. 1). 4.

29 28 Grade 100 Chain Sling Configurations To Make Your Grade 100 lloy Chain Sling: Follow these simple steps in making a sling assembly: 1. Determine the maximum load to be lifted by the sling assembly. 2. Choose the type of sling assembly suited for the shape of the load and the size of the sling assembly for the load to be lifted. The decision must take into account the angle of the sling legs in multileg slings. 3. Determine the overall reach from bearing point of master link to bearing point on hook (see Fig. 1). 4. Select components, assemble chain and components. 5. ffix sling identification tag to sling. The tag is available from your uthorized Crosby Distributor. Each sling shall be marked to show: name or trademark of manufacturer, grade, nominal chain size, number of legs, rated load for the type(s) of hitch(es) used and angle upon which it is based (reach). If measurement comes in the link, cut the following link. For two leg type slings, count the links and use an even number for clevis hooks and an odd number for eye hooks. This will position hooks in the same plane. In multileg slings always use the same number of links in each leg. When using chain slings in choker applications, the Working Load Limit must be reduced by 20%. Recommended minimum angle of choke of 120 degrees. Consult Northern Strands when planning to use an angle of choke of less than 120 degrees. If cradle grab hooks are used at a minimum angle of choke of 120 degrees, the full sling rated WLL can be utilized. In shortening applications, a 20% reduction of the Working Load Limit is required except when using the Cradle Grab Hooks, S-1311 Chain Shortener Link, the Chain Choker Hook in conjunction with the S-1325 Chain Coupler Link, or the shortener link. They can be used without any reduction to the Working Load Limit. Type CO SOS SOG SOF SSS SGS SOS SOF SOG SOCH Description Single Chain Sling with Master Link each end Single Chain Sling with Master Link and Sling Hook Single Chain Sling with Master Link and Grab Hook Single Chain Sling with Master Link and Foundry Hook Single Chain Sling with Sling Hook each end Single Chain Sling with Grab Hook and Sling Hook djustable Single Chain with Master Link and Sling Hook djustable Single Chain Sling with Master Link and Foundry Hook djustable Single Chain Sling with Master Link and Grab Hook Single with 1355 Choker

30 29 Grade 80 & 100 alloy Chain Caution Only Grade 80 and Grade 100 chain, should be used for overhead lifting applications. General Usage It must be recognized that certain factors in the usage of chain and attachments can be abusive and lessen the load that the chain or attachments can withstand. Some examples are twisting of the chain; disfigurement; deterioration by straining; usage; weathering and corrosion; rapid application of load or jerking; applying excessive loads; sharp corner cutting action and non-symmetrical loading effects. When using chain slings in choker applications, the Working Load Limit must be reduced by 20%. Northern Strands recommends a minimum angle of choke of 120 degrees. Consult Northern Strands when planning to use an angle of choke of less than 120 degrees. If Northern Strands cradle grab hooks are used at a minimum angle of choke of 120 degrees, the full sling rated WLL can be utilized. In shortening applications, a 20% reduction of the Working Load Limit is required except when using the Northern Strands Cradle Grab Hooks, Chain Shortener Link, the Chain Choker Hook in conjunction with a Chain Coupler Link, or the Crosby ELIMINTOR shortener link. They can be used without any reduction to the Working Load Limit. Care should be taken to observe these derated applications or chain may fracture or permanently stretch at loads less than the advertised chain ultimate strength and proof load respectively. Temperature Extreme temperatures will reduce the performance of alloy steel chain slings. Normal operating temperature is - 40 F to 400 F (-40 C to 204 C). See the temperature exposure chart (Table 1) to determine reduction of WLL due to operation at, and exposure to, elevated temperatures. Chemically ctive Environments can have detrimental effects on the performance of chain. The effects can be both visible loss of material and undetectable material degradation causing significant loss of strength. Usage Exposure Exposure to chemically active environments such as acids or corrosive liquids or fumes can reduce the performance of the chain. Special Surface Coating/Plating/Galvanizing Chain should not be subjected to galvanizing, or any plating process. If it is suspected that the chain has been exposed to chemically active environment, remove from service. Environmental Effects Excessive high or low temperatures, or exposure to chemically active environments such as acids or corrosive liquids or fumes, can reduce the performance of the chain.

30 Grade 80 & 100 lloy Chain General Information WORKING LOD LIMIT The Working Load Limit is the maximum load in pounds which should ever be applied to chain, when the chain is new or in as-new

ProoF TEST The Proof Test is a term designating the tensile test applied to new chain for the sole purpose of detecting injurious defects in the material or manufacture.

31 30 Grade 80 & 100 lloy Chain General Information WORKING LOD LIMIT The Working Load Limit is the maximum load in pounds which should ever be applied to chain, when the chain is new or in as-new condition, and when the load is uniformly applied in direct tension to a straight length of chain. ProoF TEST The Proof Test is a term designating the tensile test applied to new chain for the sole purpose of detecting injurious defects in the material or manufacture. It is the load that the chain has withstood under a test in which the load has been applied in direct tension to a straight length of chain. MINIMUM ULtimate LOD The Minimum U ltimate Load is the minimum load at which new chain will break when tested by applying direct tension to a straight length of chain at a uniform rate of speed in a testing machine. attachments ny attachments, such as hooks or links, should have a rated Working Load Limit at least equal to the chain with which it is used. symmetrical LODING Rated Working Load Limit assumes symmetrical loading of all sling legs. SPECIFications: SME B Paragraph Prior to initial use, all new and repaired chain and components of an alloy steel chain sling, either individually or as an assembly, shall be proof tested by the sling manufacturer or qualified person.

31 Grade 100 Links and Hooks G-100 Clevis Self-Locking Hook G-100 Swivel Self-Locking Hook Grade 100 WLL Dimensions (in.) Wt.

2 5/8 22,600 2.00 8.39 2.36 1.42 12.3 3/4 35,300 2.56 9.61 2.76 2.09 19.8 7/8 42,700 2.80 10.75 3.15 1.93 24.

34 0.79 2.4 3/8 8,800 1.61 1.34 0.63 1.34 8.58 1.73 1.02 4.4 1/2 15,000 1.81 1.69 0.83 1.50 10.87 2.01 1.18 8.8 5/8 22,600 2.40 2.

6 1 59,700 4.84 4.53 2.01 3.11 21.06 3.90 2.20 69.3 (with Ball Bearing) Grade 100 WLL Dimensions (in.) Wt.

8 7/8 42,700 3.82 3.74 1.30 2.80 17.99 3.15 2.09 39.6 G-100 Eye Foundry Hook Grade 100 Chain WLL Dimensions (in.) Wt.

32 31 Grade 100 Links and Hooks G-100 Clevis Self-Locking Hook G-100 Swivel Self-Locking Hook Grade 100 WLL Dimensions (in.) Wt. Chain (lbs) H K P T lbs 1/4-5/16 5, /8 8, /2 15, /8 22, /4 35, /8 42, (with Brass Bushing) Grade 100 WLL Dimensions (in.) Wt. Chain (lbs) B D H K P T lbs 1/4-5/16 5, /8 8, /2 15, /8 22, /4 35, /8 42, , (with Ball Bearing) Grade 100 WLL Dimensions (in.) Wt. Chain (lbs) B D H K P T lbs 5/8 22, /4 35, /8 42, G-100 Eye Foundry Hook Grade 100 Chain WLL Dimensions (in.) Wt. (lbs) K P D T H lbs 3/8 8, /2 15, /8 22, /4 35,

32 Grade 100 Links and Hooks G - 100 Forged Oblong Master Link WLL 5:1 Pounds TRDe Size Inside Length (in)

4 15,200 7/8 6.30 3.74 0.87 3.5 26,000 1 7.48 4.33 0.98 5.1 30,000 1-1/8 7.09 4.13 1.10 5.9 39,100 1-1/4 7.

lbs G-100 Connecting Link Grade 100 WLL Dimensions (in.) Wt. Chain (lbs) B D K lbs 9/32 5,700 0.71 0.81 0.

98 2.6 3/4 35,300 1.65 1.97 0.91 4.80 4.2 7/8 42,700 1.93 2.48 0.95 5.98 7.7 1 59,700 2.17 2.60 1.18 6.38 11.

Chain (lbs) D H K P T lbs 1/4-5/16 5,700 0.39 1.18 0.87 2.09 3.66 0.39 0.7 3/8 8,800 0.43 1.61 1.14 3.03 5.

33 32 Grade 100 Links and Hooks G Forged Oblong Master Link WLL 5:1 Pounds TRDe Size Inside Length (in) Inside WiDTH (in) 7,400 1/ ,000 5/ ,300 3/ ,200 7/ , , / , / , / , / Dia. (in) Wt. lbs G-100 Connecting Link Grade 100 WLL Dimensions (in.) Wt. Chain (lbs) B D K lbs 9/32 5, /8 8, /2 15, /8 22, /4 35, /8 42, , /4 90, G-100 Clevis Grab Hook Grade 100 WLL Dimensions (in.) Wt. Chain (lbs) D H K P T lbs 1/4-5/16 5, /8 8, /2 15, /8 22, /4 35,

34 33 Transport Chain and accessories Transport Chain, Grade 70 1/4, 5/16, 3/8, 1/2 High tensile carbon steel. Heat treated. Minimum Ultimate load is 4 times the Working Load Limit. Design factor of 4 to 1. Ggold dichromate finish. Meets STM & NCM standards. vailable in custom lengths. Grade 70 grab and slip hooks Did you know? Load Binders Ratchet and Lever Style 5/16-3/8, 3/8-1/2 Grade 70 transport chain assemblies have distinct advantages over Grade 43 assemblies. Grade 70 assemblies have a higher load rating and are smaller in size. This makes Grade 70 assemblies easier to work with, lighter and makes for convenient storage. Who benefits from these advantages? nyone who needs to tow, haul, lash, or tie down a load.

35 Material HNDLINg

35 Plain Trolley KW-II Geared Trolley KW-III Vitali-INTL Plain Trolley KW-II Model No.

5 15 I-Beam Width (mm) 64-203 88-203 100-203 114-203 125-210 296 313 334 363 410 B 257 300 340 380 389 Dimensions C 181 214.

8 33.7 50.7 88 Vitali-INTL Geared Trolley KW-III Model No.

5 30 I-Beam Width (mm) 64-203 88-203 100-203 144-203 125-210 125-210 125-210 344 362 383 416 461 480 480 B 257 300 340 380

36 35 Plain Trolley KW-II Geared Trolley KW-III Vitali-INTL Plain Trolley KW-II Model No. KW010 KW020 KW030 KW050 KW100 Capacity (t) Proof Load (t) I-Beam Width (mm) B Dimensions C (mm) D E Min. Radius (m) Curve Net Weight (kg) Vitali-INTL Geared Trolley KW-III Model No. KW010b KW020b KW030b KW050b KW100b KW150b KW200b Capacity (t) Proof Load (t) I-Beam Width (mm) B Dimensions C (mm) D E Min. Radius (m) Curve Net Weight (kg) Standard 3 meter length hand chain. Custom lengths available.

36 Beam Clamp tbc Quick Install Trolley QIT Vitali-INTL Beam Clamp TBC Vitali-INTL Quick Install Trolley qit Model No.

5 15 I-Beam Width (mm) 75-220 75-220 80-320 80-320 80-350 (max.) 260 260 354 354 400 B (min.

) 360 360 490 490 520 C 64 74 103 110 120 Dimensions (mm) D 5 6 8 10 12 E 215 215 260 260 280 F (max.

0 14.6 Net Weight (kg) 4.5 5.1 9.6 12.0 15.6 Model No. QIT10 QIT30 QIT50 Capacity (tonnes) 1 3 5 Proof Load (tonnes) 1.

37 36 Beam Clamp tbc Quick Install Trolley QIT Vitali-INTL Beam Clamp TBC Vitali-INTL Quick Install Trolley qit Model No. TBC-1 TBC-2 TBC-3 TBC-5 TBC-10 Capacity (tonnes) Proof Load (tonnes) I-Beam Width (mm) (max.) B (min.) B (max.) C Dimensions (mm) D E F (max.) F (min.) G H Net Weight (kg) Net Weight (kg) Model No. QIT10 QIT30 QIT50 Capacity (tonnes) Proof Load (tonnes) I-Beam Width (mm) B C D Dimensions (mm) E F G H J K Min. Radius Curve (m) Net Weight (kg)

37 Spreader Beams djustable Spreader Beams Ideal where headroom is not limited. dds stability to lift. Telescopic spread standard. Spread adjusts in 1 increments.

38 37 Spreader Beams djustable Spreader Beams Ideal where headroom is not limited. dds stability to lift. Telescopic spread standard. Spread adjusts in 1 increments. vailable with standard chain or wire rope rigging. Wide range of additional sizes and capacities available. Custom spreader beam quotes available upon request. Custom spreader beam form found at Complies with SME standards. djustable Spreader Beam Shown with Option C SPECIFICTIONS HR Headroom Weight B C F - Hook O - Hook Chain Spread Min./Max. Beam & Oblong Oblong Oblong To Beam Opening Rigging Capacity (ft.) w/chain Hooks Dia. Width Height Bottom w/latch Weight (tons) Min./Max. (in.) (lbs.) (in.) (in.) (in.) (in.) (in.) (lbs.) 4 / 6 48/ / 10 72/ / / 14 96/ / / / 6 55/ / 10 79/ / / / / / 6 60/ / 10 74/ / / / / / / 6 64/ / 10 87/ / / / / / OPTION C Chain top rigging from beam to crane hook with coupler attachment. TOP RIGGING OPTIONS OPTION W Wire rope top rigging from beam to crane hook. WR Lug required for TON capacity beams. O

Model 30 - Fixed Spreader Beams northernstrands.com 38 Spreader Beams Fixed Spreader Beams Ideal where headroom is not limited. dds stability to lift.

39 Model 30 - Fixed Spreader Beams northernstrands.com 38 Spreader Beams Fixed Spreader Beams Ideal where headroom is not limited. dds stability to lift. vailable with standard chain or wire rope rigging. Wide range of additional sizes and capacities available. Custom spreader beam quotes available upon request. Custom spreader beam form found at Complies with SME standards. Shown with Option C Specify Top Rigging Fixed Spreader Beam Shown with Option C SPECIFICTIONS SPECIFICTIONS Spread (feet) Capacity HR Headroom (in.) Spread (feet) Other (tons) Weight (lbs.) Capacity HR Headroom (in.) Dimensions (in.) Other HR Headroom 34 (tons) 46Weight (lbs.) =1/2 20 F=4-1/4 24 Dimensio 2 Weight 45 60HR Headroom B=2-1/2 132 O=31/ =1/2 2 Weight C= B=2-1/2 HR Headroom =1 F=6 C=5 5 Weight 62 78HR Headroom B=3-1/2 134 O=1-1/ =1 5 Weight C= B=3-1/2 HR Headroom =1-1/4 F=8-1/8 C=7 10 Weight HR Headroom B=4-3/8 138 O=1-1/2 163 =1-1/4 10 Weight C=8-3/ B=4-3/8 HR Headroom =1-1/2 F=9-1/4 C=8-3/4 15 Weight HR Headroom B=5-1/4 140 O=1-3/4 167 =1-1/2 15 Weight C=10-1/ B=5-1/4 HR Headroom =1-3/4 F=9-3/4 C=10-1/2 20 Weight HR Headroom B=6 140 O=2 170 =1-3/4 20 Weight C= B=6 HR Headroom =1-3/4 F=9-3/4 C=12 30 Weight 285 HR Headroom B=6 145 O=2 =1-3/4 30 Weight C= B=6 HR Headroom =2 F=13 C=12 40 Weight 563 HR Headroom B=7 O=2-3/4 =2 40 Weight C=14 B=7 C=14 NOTE: Weight = Beam and hooks only - (no top rigging). OPTION C OPTION W OPTION C Chain top rigging from beam to crane hook. TOP RIGGING OPTIONS OPTION W Wire rope top rigging from beam to crane hook. OPTION OPTION djust--leg sling top riggin for off-center load adjustment

39 Hand Winch Vitali-INTL Hand Winch Vitali-INTL Backward & Forward lever placed in tandem providing a slim design and

The pins can be replaced without removing the load. Safety pin fastens the anchor bolt.

Spare shear pins Two pieces of spare shear pins located in the carrying handle.

High strength cast aluminum alloy body Light weight, simple to operate.

tested to 150% of the rated capacity and is issued with an individual test certificate. Model No.

40 39 Hand Winch Vitali-INTL Hand Winch Vitali-INTL Backward & Forward lever placed in tandem providing a slim design and assuring power transfer along the center. Built-in shearing pin prevent overload. It functions at approx. 25% overload. The pins can be replaced without removing the load. Safety pin fastens the anchor bolt. nchor bolt offers numerous and versatile connection possibilities with load hooks, sling ropes and sling chains. Spare shear pins Two pieces of spare shear pins located in the carrying handle. Rope clamp system easily disengaged with a lever allowing smooth installation of the wire rope. High strength cast aluminum alloy body Light weight, simple to operate. Smooth contour design with large, flat bottom surface for increased stability in horizontal as well as vertical working position. Stamped serial number for easy identification Galvanized steel wire rope mounted on a reel Every rope is operationally tested to 150% of the rated capacity and is issued with an individual test certificate. Model No. YL008 YL016 YL032 Lifting Capacity (Rated Load) (tonnes) *Pulling Capacity (tonnes) Lever Pull at Rated Load (N) Forward Travel (mm) Wire Rope Diameter (mm) Net Weight (Body) (kg) Net Weight (20 metres Wire Rope) (kg) Net Weight (Lever Handle) (kg) Dimensions (Body) L x W x H (mm) 440 x 70 x x 100 x x 120 x 350 *Observe local regulations

40 Chain and lever hoists Vitali International offers easy to use lever and chain hoists of the highest quality at affordable prices.

Chain and Lever hoists are used regularly by agriculture, automotive, construction, manufacturing and mining industries. Hoists have thousands of uses, from lifting vehicle engines to steel erection.

5 Tonne Chain Hoists - 12m Fall 2 Tonne Chain Hoists - 3m Fall 2 Tonne Chain Hoists - 6m Fall 2 Tonne Chain Hoists - 12m Fall 3 Tonne Chain Hoists - 3m fall 3 Tonne Chain Hoists - 6m fall 3 Tonne

41 40 Chain and lever hoists Vitali International offers easy to use lever and chain hoists of the highest quality at affordable prices. These benefits combined with fast local service make Vitali-Intl hoists the perfect choice for all your material handling needs. Did you know? Chain and Lever hoists are used regularly by agriculture, automotive, construction, manufacturing and mining industries. Hoists have thousands of uses, from lifting vehicle engines to steel erection. Chain Hoists 1 Tonne Chain Hoists - 3m Fall 1 Tonne Chain Hoists - 6m Fall 1 Tonne Chain Hoists - 12m Fall 1.5 Tonne Chain Hoists - 3m Fall 1.5 Tonne Chain Hoists - 6m Fall 1.5 Tonne Chain Hoists - 12m Fall 2 Tonne Chain Hoists - 3m Fall 2 Tonne Chain Hoists - 6m Fall 2 Tonne Chain Hoists - 12m Fall 3 Tonne Chain Hoists - 3m fall 3 Tonne Chain Hoists - 6m fall 3 Tonne Chain Hoists - 12m fall 5 Tonne Chain Hoists - 3m Fall 5 Tonne Chain Hoists - 6m Fall 5 Tonne Chain Hoists - 12m Fall 10 Tonne Chain Hoists - 3m Fall 10 Tonne Chain Hoists - 6m Fall 10 Tonne Chain Hoists - 12m Fall 15 Tonne Chain Hoists - 3m Fall 15 Tonne Chain Hoists - 6m Fall 15 Tonne Chain Hoists - 12m Fall 20 Tonne Chain Hoists - 3m fall 20 Tonne Chain Hoists - 6m fall 20 Tonne Chain Hoists - 12m fall Lever HoiSTS 0.25 Tonne Lever Hoist - 1.5m Fall 0.5 Tonne Lever Hoist - 1.5m Fall 0.8 Tonne Lever Hoist - 1.5m Fall 0.8 Tonne Lever Hoist - 4.5m Fall 1.6 Tonne Lever Hoist - 1.5m Fall 1.6 Tonne Lever Hoist - 3m Fall 1.6 Tonne Lever Hoist - 4.5m Fall 1.6 Tonne Lever Hoist - 6m Fall 3.2 Tonne Lever Hoist - 1.5m Fall 3.2 Tonne Lever Hoist - 3m Fall 3.2 Tonne Lever Hoist - 4.5m Fall 3.2 Tonne Lever Hoist - 6m Fall 6.3 Tonne Lever Hoist - 1.5m Fall 6.3 Tonne Lever Hoist - 3m Fall 6.3 Tonne Lever Hoist - 4.5m Fall 6.3 Tonne Lever Hoist - 6m Fall 9 Tonne Lever Hoist - 1.5m Fall 9 Tonne Lever Hoist - 4.5m Fall *Custom lifts available. 30 and 50 tonne available upon request.

42 41 Chain HoiSTS We have the right Hoist for your job. Standard Features Seal type caged ball bearings #21 & #21 on load sprocket Seal type caged ball bearings #21B & caged roller bearings #31B on the pinion shaft (minimize manual effort thanks to efficient drive train) Superior design of top hook holders for double / several columns of load chains Experience exceptional durability thanks to all-steel construction featuring rugged gear case enclosure and handwheel cover Enjoy increased lifting height thanks to low headroom Grade 100 heat-treated black finish load chain Reinforced double pawl brake system and larger dia. pawl springs ensure reliable brake Optional Features Overload protection system Patent fused brake disc Thrust bearings in bottom hook assembly Easy removable top hook

42 Chain Hoists Capacity (tonnes) 1 1.5 2 3 5 10 15 20 30 50 Model No. K100 K150 K200 K300 K500 K1000 K1500 K2000 K3000 K5000 No. of Falls 1 1 1 2 2 4 6 8 12 20 Load Chain (mm) 6.

1 x 21 9 x 27 9 x 27 9 x 27 9 x 27 10 x 28 10 x 28 Load Chain Grade 100 100 100 100 100 100 100 100 100 100 Pull to Rated Load (N) 284 343 353 353 333 353 363 353 x 2 345 x 2 345x 2

9 153 205 284 - Gross Weight (kg) 12.9 16.4 21 24.8 42.5 105 166 219 301 - Extra Wt. per m (kg) 1.8 2.1 2.3 3.2 4.4 7.9 11.4 15.8 29.3 46 a (mm) 161.5 170 183.

43 42 Chain Hoists Capacity (tonnes) Model No. K100 K150 K200 K300 K500 K1000 K1500 K2000 K3000 K5000 No. of Falls Load Chain (mm) 6.3 x x 21 8 x x 21 9 x 27 9 x 27 9 x 27 9 x x x 28 Load Chain Grade Pull to Rated Load (N) x x 2 345x 2 Proof Load (tonnes) Hand Chain (mm) Standard Lift (m) Net Weight (kg) Gross Weight (kg) Extra Wt. per m (kg) a (mm) b (mm) c (mm) Dimensions d (mm) e (mm) f (mm) g (mm) h (mm) ,000 1,150 1,250 1,700 Custom chain lengths available. 30t to 50t available upon request.

43 Lever hoists We have the right Hoist for your job. Main Features More compact, very robust but light weight, short lever handle and low headroom. Grade 100 load chain.

44 43 Lever hoists We have the right Hoist for your job. Main Features More compact, very robust but light weight, short lever handle and low headroom. Grade 100 load chain. Interchangeable parts for standard and overload protected hoist. Reasonable pulling force to rated capacity. Unique hand wheel & knob design. No preload required. Innovative & patent fused brake disc. Heavy duty cast latches. Improved hook tip design. Caged roller bearings on load sprocket. Phosphoric surface treatment for the #3 driving shaft. Sizes range from.25,.5,.8, 1.6, , and 9 tonnes.

45 44 Lever Hoists Capacity (tonnes) Model No. KX025 KX050 KV008 KV016 KV032 KV063 KV090 No. of Falls Load Chain (mm) 3.2 x x x x x x x 28 Pull to Rated Load (N) Proof Load (tonnes) Standard Lift (m) Net Weight (kg) Gross Weight (kg) Extra Wt. per m (kg) a (mm) b (mm) c (mm) d (mm) Dimensions e (mm) f (mm) g (mm) h (mm) i (mm)

46 45 thern power winches Rail Car Pulling Winch Problem to position up to ten railcars during loading and unloading process. Solution closed loop, single winch system to move large loads in two directions Product Features Load Rating: 30,000 lb Line Speed: 40 fpm Travel Distance: 625 ft Power: 380 VC, 3 phase, 50 hertz. Extended grooved drum for single layer wrapping and uniform speed. Chain driven rotary limit switch to limit travel in both directions. Epoxy gray finish for improved corrosion resistance in marine environment.

47 46 thern power winches POWER WINCHES Side View Front View Top View R M S (hole dia.) drum CL N H drum C L P D 4WS Series - Winch Dimensions (in) B Model Extension 4 B 4 C D E H J K M n P R S (hole dia.) 4WS1M WS1M WS1M WS1M WS1M WS1M WS1M WS1M WS1M WS3M WS3M WS3M WS3M WS3M WS3M WS3M WS3M WS6M WS6M WS6M WS6M WS6M WS6M WS6M Dimensions are for reference only and subject to change without notice. 4 Dimensions and B may vary with motor selection. E 4WS Series - Drum Dimensions Model Drum Diameter Flange Diameter Drum Width Flange ngle Distance 5 (in) (mm) (in) (mm) (in) (mm) (ft) (m) 4WS1M WS3M WS6M Dimensions are for reference only and subject to change without notice. 5 Recommended minimum distance between drum and lead sheave for smooth drum. K C J

47 POWER WINCHES PORTBLE Model 3WG4-B3500-9S6 thern power winches Series 3WG4 Worm Gear Power Winches Machine Cut Gears provide high efficiency and smooth operation.

48 47 POWER WINCHES PORTBLE Model 3WG4-B3500-9S6 thern power winches Series 3WG4 Worm Gear Power Winches Machine Cut Gears provide high efficiency and smooth operation. Series 4WS3M10 Series 4WS Worm/Spur Gear Power Winches Enclosed Oil Bath reduced wear on gears for long shown with clutch operating Modular life. Design Oil seals allows keep us to make-to-order oil in and dirt each out. winch to meet your exact needs. Cast luminum combines rugged work site durability Standard with Features a lightweight include TEFC package. brake motors. enclosed machine cut gearing and flange style ball bearings. Internal Mechanical or Motor Brake provides positive Custom load Modifications control for available lifting and include lowering grooved operations. drums, special drum lengths and diameters, limit switches, roller pressure bars, and special finishes. Wire rope assemblies and Ball Pneumatics, Bearings hydraulic provide and smooth alternate and motor efficient voltages operation. are also available. controls sold separately Lifting Two-year Handles Limited aid Warranty in work leads site the lifting industry. and positioning. Dual Function Cable nchor has both standard set Series Series 4WS 4WS Electric Electric Configurations Configurations and and Performance Performance screw Characteristics Characteristics slot and keyhole slot on drum for quick disconnect Model number Extensions Load Rating with 3/8 inch Wire Line Speed swaged ball ends. Drum Capacity 1 pprox. Model Load Line Motor Clutch 1st Mid Full Rope 1st Full 1st Mid Full Ship Mounting number Rating Speed Codes Opt Motor Layer Drum Drum Dia. Options include floor, wall and ceiling Layer Drum Layer Drum Drum Weight 2 (lb) (kg) (fpm) (mpm) (hp) (lb) (kg) (lb) (kg) (lb) (kg) (in) configurations. (mm) (fpm) (mpm) (fpm) (mpm) (ft) (m) (ft) (m) (ft) (m) (lb) (kg) Drum features 4WS1M6 dual function 15 4 BDEF C / Modular Design for easy product customization and cable anchors. 4WS1M BDEF C / WS1M BDEF C /16 quick 4.8 lead times WS1M BDEF C / Year Limited Warranty leads the industry. 4WS1M BDEF C / WS1M DEF C / WS1M BDEF C / WS1M DEF C / WG4 Series Performance Characteristics 4WS1M BDEF C / Brake Duty Motor Clutch Motor option for 4WS1M6 (for horizontal pulling Load only) Rating Line Speed add: pprox. 5 3 Model 4WS3M Style Rating 4 1 BDEF CodesC HP st 907 Layer Mid 453Drum 5/ Full Drum st Layer Full 67Drum Ship Wt. 2 4WS3M DEF C / (mins) (lb) (kg) (lb) (kg) (lb) (kg) (fpm) (mpm) (fpm) (mpm) (lb) (kg) 4WS3M BDEF C / WG4-B3500-9S6 4WS3M Internal DEFB,C,D,EC / WG4-B S6 4WS3M Internal BDEF B,C,D,EC / WG4-B4000-9S6 4WS3M Internal BDEF C / WG4-B4600-9S6 4WS3M Internal BDEF B,C,D,EC / WS3M DEF C / WG4-B S6 Internal 15 C,D,E Clutch option for 4WS3M10 (for horizontal pulling only) add: 8 4 3WG4-M3500-9S6 Motor 60 D,E WS6M DEF C / WG4-M S6 4WS6M Motor BDEFB,D,E C / WG4-M4000-9S6 4WS6M Motor BDEF C / WG4-M4600-9S6 4WS6M Motor DEFB,D,E C / WG4-M S6 4WS6M Motor BDEFD,E C / WS6M DEF C / Please contact Thern or nearest Thern Distributor for firm fixed price and delivery. 1 Duty rating 4WS6M12 represents 6000 maximum 2721 operating 20 time 6 at DEF full load. Rating C includes 5 lifting 6400and 2902 lowering. 4200llow 1905components to cool 9/16 between 14.2 cycles Weight may vary with motor selection. Clutch option for 4WS6M12 (for horizontal pulling only) add: 12 6 When ordering, please indicate Model Number and Extensions. Examples: 4WS1M (without clutch); 4WS1M C (with clutch). Please contact Thern or nearest Thern Distributor for firm, fixed price and delivery. 1 Control ctual drum Options capacities 25-30% and less due ccessories to nonuniform winding. Wire rope tension will also affect drum capacity. 2 Weight may vary with motor. Notes: Model Description 115/1/60 230/1/60 230/3/60 460/3/60 NOTES: Motor Codes Electric Drum Control 10L21 NEM 1 Drum Control Control Drum to 1.5 Switches hp to 2 hp Order - Order to 3 hp Separately to 3 hp For more information and 115 volt 1 phase other control options, please B 230 volt 1 phase 10L7E1 NEM 1 to 1.5 hp to 3 hp to 5 hp to 7.5 hp Model Description 115/1/ /1/60 230/3/60 460/3/60 see see pages?? C 208 volt 3 phase 10L24 10L21NEM NEM 4 - watertight 1 to to hp hp to to 22 hp hp to to 3 hp to 3 hp hp Custom controls are available Custom controls are D 230 volt 3 phase 10L7E4 10L7E1NEM NEM 4 - watertight 1 to to hp hp to to 33 hp to 5 hp to 7.5 hp including wireless remote available including wireless E 460 volt 3 phase 10L24 NEM 4 watertight to 1.5 hp to 2 hp to 3 hp to 3 hp control, variable speed Please contact Thern or nearest Thern Distributor for firm, fixed price and delivery. remote 10L7E4 NEM 4 watertight to 3 hp to 5 hp to 7.5 hp F ll other voltages, please contact control, control, electronic variable overload, speed the Thern. 10P146 6-foot pendant control to 1 hp and enclosures control, electronic for special overload, environments. and enclosures Please contact Thern or nearest Thern Distributor for firm, fixed price and delivery. 3 for special environments Controls for 115V single phase motors up to 1.5 hp, include an 8-foot power cord with grounded plug. 20 Complete, downloadable details on line These products are not for lifting people or things over people. FLCL-0916

49 M 20 9/32 K northernstrands.com J N drum CL 48 R P 20 9/ /32 M 20 9/ /32 M J M CK N K drum CJ K M drum CL J K WINCHES thern powerpower winches PORTBLE 3WG4 Options and ccessories R S C POWER WINCHES POWER WINCHES POWER WINCHES POWER WINCHES C S C M 20 9/ / /32 H temperaturewith environments - up tomotors 65 C for (149 temperature environments -F). upavailable to 65 G C (149 F). G special seals and high Temperature Extreme Temperature Option Extreme Option available temperature environments up to 65 C (149 special seals and motors forhhighf). F with specialwith seals and motors for high H temperature environments - (149 up to F). 65 C (149 F). (in) 3WG4 Series Winch Dimensions (in) temperature environments up to 65 C drum CLH Winch 3WG4 Series Dimensions drum CL Winch Dimensions (in) 3WG4 Series pprox. drum CL Winch H H 3WG4 Series Dimensions Model CF (in)b D pprox. Model B 3 Ship Wt. C D E T F 3 D drum C Ship Wt. pprox. drum CLDimensions 3WG4 Series Winch Dimensions (in) 3WG4Model Series (in) B C D E T L Winch 3WG4-B3500-9S D Ship Wt. 3 3 E pprox pprox. 3WG4-B S6 F Model ModelE 3WG4-B3500-9S6 B 3Ship Wt. D D Ship Wt. E 3WG4-B4000-9S WG4-B S63WG4-B S E F 5.63 T D F G E G 1.88 E F H F F 3 H WG4-M S T G J E H3 K 1 7 J 1 M D D D T T 9.5 J 18.5 K T T D E T D drum CL E D D E BD C F9.5 G H 3K1 18.5J M E5.63 F G H J 23 T F 3WG4-B3500-9S WG4-B3500-9S WG4-B4600-9S WG4-B4000-9S63WG4-B4000-9S6 E E WG4-B S WG4-B S6 F F WG4-B S WG4-B4600-9S63WG4-B4600-9S WG4-B4000-9S6 3WG4-B4000-9S WG4-M3500-9S WG4-B S WG4-B S6 3WG4-B4600-9S6 3WG4-B4600-9S WG4-M S WG4-M3500-9S WG4-M3500-9S WG4-B S6 3WG4-M4000-9S WG4-B S WG4-M S WG4-M4600-9S WG4-M S WG4-M3500-9S6 3WG4-M3500-9S WG4-M4000-9S6 3WG4-M S WG4-M S63WG4-M S WG4-M4000-9S with motor 21selection are to without 1notice WG4-M4600-9S WG4-M4000-9S6 Dimensions, B and H may vary Dimensions for reference only and subject change WG4-M4000-9S WG4-M4600-9S WG4-M S WG4-M4600-9S6 3WG4-M4600-9S C 24.5 drum CL D 3 3 3WG4-B3500-9S6 F K n M 7 n M n P P R 9 P 1.25 R 6 R S S10.5 S T9/16 T T Kn n 61.25P / M P R6 S 6 R9/16 T 10.5 S 0.59/16 T /16 9/ / /16 9/ / /16 9/ / /16 9/ /16 9/ / /16 9/ /16 9/ / /16 9/ /16 9/ / / / /16 9/ /16 9/ / / / / / / /16 9/ / / / / / / / /16 Drum Layer Dimensions, B and H may vary with motor selection. Dimensions are for only and subjectseries to change17.75 without notice. 3WG4 19.5reference Capacities Drum WG4-M S63WG4-M S6 Dimensions, B and H may vary with motor selection. Dimensions are for reference only and subject to change without notice. 3 3 B and H may vary with motor selection. Dimensions forsubject reference only andwithout subjectnotice. to change without notice. Breaking Wire Rope Dimensions, B anddimensions H may vary,with selection. Dimensions are for reference onlyareand to change 4 It ismotor the owner or operator s responsibility to Model 3WG4 Series DrumDiameter Capacities Strength 1st Layer Mid Drum Full Drum determine the suitability of the equipment to its intended use. Study all applicable codes, manuals Drum Layer 3WG4 Series Drum Capacities 3WG4 Series Drum Capacities Wire Rope Breaking (in) (mm) (lb) (kg) (ft) (m) (ft) (m) (ft) (m) It is the owner or operator s responsibility to Model and regulations. Be sure to read the Owner s Diameter Strength 1st LayerDrum Mid Drum Full Drum determine the suitability of the equipment to its Drum Layer Manual supplied with the equipment before Layer Layer WG4-B/M 5/16Breaking 1.9 Breaking Wire RopeWire Rope Wire Rope Breaking It use. is theresponsibility owner or operator s responsibility to It is theitowner orintended operator s to is the owner or operator s responsibility to Model Study all applicable Model operating it. codes, manuals Model Diameter Diameter (in) (mm)strength (lb) 9.5 Strength (kg) (ft) (ft)4.2 (m)65 (ft) (m) Diameter 1st(m) Layer Drum Full Drum 42.6 determine thesure suitability theowner s equipment to its 1st6 Layer Mid Full Drum determine the suitability the equipment Drum 19.8 Full 140 3WG4-B/M 3/8 Strength 15,100 1st Layer MidMid Drum Drum determine the suitability of theof Be equipment to toofits and regulations. to read theits use. Study all applicable codes, manuals3wg4-b/m 5 use. Study all applicable manuals Manual supplied withcodes, thecodes, equipment before / intendedintended use. Study allintended applicable manuals (mm) (kg) 18 (ft)tension (m) rope (ft) affect (m) drum (in) capacities be 25-30% less, due (ft) to nonuniform winding. will also drum(m) capacity. (in)(in) ctual (mm) (lb) may (kg) (lb) (m) (ft) in wire (m) (ft)(m) (m) (ft)(ft) 60.9 (m) (mm) (lb) (kg) (ft) (m) (ft) and regulations. Be sure to read the Owner s and regulations. Be sure to read Owner s 5 operating it. read Values based on 7x19 Galvanized ircraft cable. and regulations. Be sure to the the Owner s /8 15,100 Manual supplied with the equipment before 3WG4-B/M Manual supplied with the equipment before on 9.5 6x37 EIPS wire rope WG4-B/M 3WG4-B/M 5/16 6 Values 1.9based5/ Manualoperating suppliedit.with the equipment before WG4-B/M 5/ operating it. 4 capacities may be 25-30% less,69.5 due to nonuniform Tension in wire14 affect drum capacity WG4-B/M 15,100 6winding. operating it rope will 65also WG4-B/M5 ctual drum 3/ /815,100 6 IMPORTNT: IMPORTNT: 4 ControlDrum Options and ccessories 3WG4 Series Capacities IMPORTNT: IMPORTNT: IMPORTNT: 3WG Series Drum Dimensions Values based on3/8 7x19 Galvanized cable WG4-B/M 9.5 ircraft15, ctual capacities less,winding. due to nonuniform winding. wire drum rope will also affect drum capacity. Values based ondrum 6x37 EIPS wire rope. ctual drum capacities may be 25-30% less,may duebeto25-30% nonuniform Tension in wire rope Tension will alsoinaffect capacity. Fleet ngle 5 Values based on 7x19 Galvanized cable. 7x19 Galvanized cable. ctual based drum on capacities may Sheave beircraft 25-30% less, dueircraft to nonuniform winding.model Tension in wiredrum rope will also affect drumdia. capacity.drum Width Dia. Flange Lead 6 Values based on 6x37 EIPScable. wire rope. 56 Values based on 6x37 EIPS wire rope. Values based on 7x19 Galvanized ircraft Fleet ngle Distance 7 Center 3WG Series Drum Dimensions Load (in) (mm) (in) (mm) (in) (mm) (ft) (m) 6 Line Values based on 6x37 EIPS wire rope. Fleet ngle 3WG4-M Fleet 166 ngle Model 3WG Series Drum Drum Dia. FlangeDimensions Dia. Drum Width 3WG Series Drum Dimensions 7 Lead Sheave Distance Dimensions are for reference only and subject to change without notice. Fleet ngle Distance Fleet ngle 7 Fleet ngle Fleet ngle Load Recommended minimum distance between drum and lead sheave for smooth drum. (in) (mm) (in) (mm) (in) (mm) (ft) (m) Model Dia. Drum Width 7 Distance 7 Model Drum Dia. Drum FlangeDia. Dia. Flange Drum Width Lead Sheave Lead Sheave Distance 3WG4-M Fleet3.2ngle Fleet ngle Load (in) (in) (mm) (in)(ft) (mm) (m) Load (in) Drum (mm) Dia. (in) (mm) (mm) (in) (mm) (m) (ft) Model Flange Dia. Drum Lead Sheave Dimensions are forcomplete, reference onlydownloadable and subject to change withouton notice. details line Width Distance3.27 3WG4-M Distance These products are not for lifting people or things over people. 3WG4-M 4.00 minimum 102 distance 8.50between 216drum and for smooth 10.5drum Recommended lead sheave 45 Values 3WG Series Drum Dimensions Center Line Center Line Center Line Center Line FLCL-0916 Distance Distance Load These products are not for lifting people or things over people. Distance FLCL-0916 These not for lifting people or things over people. These products are notproducts for liftingare people or things over people. FLCL-0916 (in) (mm) (in) (mm) (in) (mm) (ft) Dimensions forsubject reference only andwithout subjectnotice. to change without notice. Dimensions are for reference onlyareand to change 7 7 Recommended minimum distance between drum and lead6.50 sheave for smooth 3WG4-M 4.00 between drum.10.5 Recommended minimum distance drum and8.50 lead sheave for smooth drum. Complete, downloadable details on line Dimensions are for reference only and subject to change without notice. 7 Recommended minimum downloadable distance and on leadline sheave for smooth drum. Complete, details Complete, downloadable detailsbetween on linedrum FLCL-0916 These products are not for lifting people or things over people. FLCL-0916 P P S C S Side View N N R M Series B Series M Series Emergency Hand Crank for manual K J PORTBLE PORTBLE B M N operation in power loss situations. drum C G L PORTBLE PORTBLE K J - Top Mounting 3WG4and Options and ccessories Mounting View - Top View Side View Side View Options ccessories 3WG4 3WG4 Rotary3WG4 Limit Winches provide secondary P M M M Series B Series R N M Series M Series B Series 3WG4 Options and ccessories Series Emergency Hand Crank for manual M Series Mounting View Series drum- CL Mounting Top View - Top3WG4 Side View Side View 3WG4 Options and ccessories K J Emergency Hand for manual 3WG4 and shut-off foroptions load travel inccessories onecrank or two 3WG4 K J B B M M M operation in power loss situations. M Series B Series S N M operation in power loss drum Series B Series MM Series Series GN CL M Series directions. drum C Emergency Hand Crank for in manual Emergency Hand Crank forsituations. manual K J P K Series K H J G L Emergency Hand Crank for manual operation R J K B J B Rotary Limit Winches provide secondary P M N operation in power loss situations. Rotary Limit Winches provide secondary M N drum C operation in power loss situations. P C N drum C R G L Internal Mechanical Brake available drum CL loss situations. case of power G L drum N CL shut-off forinload travel infor one or two K drum J J CL K shut-off for load travel one or two models Rotary Limit Winches provide P Rotary Limit Winches provide secondary P motor brake to provide dual braking.secondary SR S directions. R N H N S directions. DP Rotary Limit Switches provide secondary shut-off drum CL P R H shut-off for in load travel in one or twoto limit drum CL shut-off for load travel one or two T R C Internal Mechanical Brake available for drum CL C C Special Finishes for harsh or hazardous in one or two directions. loaddirections. travel S directions. Internal Mechanical Brake available for S P E drum CL H P H RS motor brake models to provide dual braking. R environments. F C D motor brake models to provide dual braking. for C S Mechanical Internal Mechanical Brake available drum CL T Internal Brake available for drum CL D Internal Mechanical Brake available for motor brake models to C T Special Finishes for harsh or hazardous motor brake models toare provide dual braking. CS View Special Finishes for harsh orbraking. hazardous Special Motors and Cable Install Back S motor brake models tocontrols provide dual E provide dual braking. D environments. D FE M Series B Series T T M Series environments. FC available in afinishes wide range of standard and hazardous Special Finishes harsh C Special for harsh orfor hazardous Special Motors andorcontrols are Install disconnect Back View E B CableQuick Set screw anchor Special for hazardous environments. Finishes E environments. custom configurations for single variable M Series B Series Special Motors andincontrols areof standard and F Back ViewF Cable Install G environments. M Series available a or wide range form1/4 to 1/2 inch anchor for 1/4 to 3/8 Series B Series M Series B Set screw anchor Quick disconnect available acustom wide range ofare standard and wire rope. inch wire rope with Motors Special Motors and Controls arerange speed. and in Controls are available in for a wide of Back View Special Motors configurations single or variable Cable Install Back View Special and Controls Cable Install B inch Quick disconnect G for 1/4 to 3/8 for 1/4 to 1/2 anchor Set screw anchor M Series B Seriesfitting. Series B Series custom configurations for single or variable anchor MM Series M Series speed. available in a wide range of standard and wire rope. inch wire rope with G for 1/4 standard and custom configurations for single or variable speed. available in a wide range of standard and for 1/4 to 1/2 inch anchor to 3/8 M Series B Series Torque Limiters as part of the motor M Series B B anchor Set screw Quick anchor fitting. Set screw anchor Quick disconnect wire rope. inch wire ropedisconnect with custom single variable customspeed. configurations for single orforvariable M B Series configurations Torque Limiters as partor ofbseries the motor M Series G for for 1/4 to 1/2 inch 1/4 to 3/8 G for 1/4 anchor controls. for 1/4 to 1/2 anchor toanchor 3/8 fitting. H inch Torque Limiters as part of the motor controls. M Series B Series speed. Torque Limiters wire rope. speed. Series as part of the motor Mcontrols. B wire rope. inch wire rope inch with wire rope with H G drum CL anchor fitting. anchor fitting. Extreme Extreme Temperature Option available B controls. G M B Series Torque Limiters as motor part ofseries the motor M Series B Series drum CL H M Series Temperature available with special seals and Torque Limiters as part of the Option Extreme Temperature Option available M Series G D with special and motors forseals high seals B F) D controls. Extreme Temperature Option available B 65 with special and- up motors forchigh controls. motors for high temperature environments to (149 D drum CL H 20 9/ WG4 Series 20 9/32 P Mounting - Top View L N drum C P L drum CL S J Complete, downloadable details on line (m) Regina Henderson Drive, Regina SK S4N 5W R R R

49 thern power winches Drum features dual function cable anchors Model 3WG4-B3500-9S6 3WG4 Series Performance Characteristics Series 3WG4 Worm Gear Power Winches Machine Cut Gears provide high

Cast luminum combines rugged work site durability with a lightweight package. Internal Mechanical Brake provides positive load control for lifting and lowering operations.

50 49 thern power winches Drum features dual function cable anchors Model 3WG4-B3500-9S6 3WG4 Series Performance Characteristics Series 3WG4 Worm Gear Power Winches Machine Cut Gears provide high efficiency and smooth operation. Enclosed Oil Bath reduced wear on gears for long operating life. Oil seals keep oil in and dirt out. Cast luminum combines rugged work site durability with a lightweight package. Internal Mechanical Brake provides positive load control for lifting and lowering operations. Ball Bearings provides smooth and efficient operation. Pressure Plate applies pressure to drum and wire rope to help maintain uniform winding. Not available on clutch models. Lifting Handles aid in work site lifting and positioning. Dual Function Cable nchor has both standard set screw slot and keyhole slot on drum for quick disconnect with 3/8 inch swaged ball ends. Mounting Options include floor, wall, and ceiling configurations Modular Design for easy product customization and quick lead times. Two-year Limited Warranty leads the industry. Model Brake Style Duty Rating 1 Motor Codes Motor HP Model Description 115/1/ /1/60 230/3/60 460/3/60 10L21 NEM 1 to 1.5 hp to 2 hp to 3 hp to 3 hp 10L7E1 NEM 1 to 1.5 hp to 3 hp to 5 hp to 7.5 hp 10L24 NEM 4 - watertight to 1.5 hp to 2 hp to 3 hp to 3 hp 10L7E4 NEM 4 - watertight to 1.5 hp to 3 hp to 5 hp to 7.5 hp Load Rating Line Speed pprox. Ship. Wt. 2 1st Layer Mid Drum Full Drum 1st Layer Full Drum (mins) (lb) (kg) (lb) (kg) (lb) (kg) (fpm) (mpm) (fpm) (mpm) (lb) (kg) 3WG4-B3500-9S6 Internal 15 B,C,D,E WG4-B S6 Internal 15 B,C,D,E WG4-B4000-9S6 Internal WG4-B4600-9S6 Internal 15 B,C,D,E WG4-B S6 Internal 15 C,D,E WG4-M3500-9S6 Motor 60 D,E WG4-M S6 Motor 60 B,D,E WG4-M4000-9S6 Motor WG4-M4600-9S6 Motor 60 B,D,E WG4-M S6 Motor 60 D,E Please contact Thern or nearest Thern Distributor for firm fixed price and delivery. 1 Duty rating represents maximum operating time at full load. Rating includes lifting and lowering. llow components to cool between cycles. 2 Weight may vary with motor selection. Notes: Motor Codes Control Options and ccessories Please contact Thern or nearest Thern Distributor for firm, fixed price and delivery. Controls for 115V single phase motors up to 1 hp, include an 8-foot power cord with grounded plug. For more information and other control options, please see pages?? Custom controls are available including wireless remote control, variable speed control, electronic overload, and enclosures for special environments 115 volt 1 phase B 230 volt 1 phase C 208 volt 3 phase D 230 volt 3 phase E 460 volt 3 phase F ll other voltages, please contact the Thern.

51 50 thern power winches Options Options and and ccessories Emergency Emergency Hand Hand Crank Crank for Options and manual ccessories for operation manual in operation case of in Emergency Hand power Crank case failure. for ofmanual Does power not operation failure. include in case of power failure. handle. Does not include handle. Two-Part Two-Part Line Kit to convert Line Part to double Line Kit to Kit convert line to rigging. convert line to rigging. double line rigging. to double Rotary Limit Switches Rotary Rotary for Limit secondary Limit Switches Switches shut-off for to limit load travel in one secondary or two for secondary directions. shut-off to Not limit shut-off available load to on clutch models. travel in limit one load or two travel directions. in one or not available Special Motors and Controls two directions. clutch including Not severe available on clutch models. models. duty and explosion proof. Special Special Motors Motors and and Special Finishes Controls for hazardous Controls including environments including severe severe duty and explosion Torque Limiters as part duty of the and proof. motor explosion controls proof. on electric models. Special Special Finishes Finishes for for hazardous hazardous environments. environments. Torque Limiters as part of Torque Limiters as part the motor controls on electric of the motor controls on models. electric models. Important: It is the owner's or operator's It is the owner or operator s responsibility to determine to determine the suitability the of the equipment to its intended IMPORTNT: use. suitability Study all applicable of the equipment codes, manuals toand regulations. Be sure to read its the intended Owner s Manual use. supplied Study with all the equipment It is the owner before operating it. applicable or operator s codes, responsibility manuals, to determine and the suitability regulations. of the equipment Be sure to its to intended use. read Study the all Owner's applicable codes, Manual manuals and regulations. supplied Be sure with to read the the equipment Owner s Manual supplied with before the equipment operating before it. operating it. Series 4WP2D Dimensions Series 4WP2D Dimensions Series Series 4WP2D 4WP2D Dimensions (in) Series 4WP2D Dimensions (in) PORTBLE POWER WINCHES Side View Rear View Top View Side View Rear View Top M View Series 4WP2D8 Side View Rear View KTop View J Series Series 4WP2D8 4WP2D8 S C M (hole dia.) K J N S C (hole dia.) H drum C L P N R B Series 4WP2DC Series 4WP2DC R B R R B B motor D F F H H D M M E drum C L Install wire rope correctly as shown, or Install brake wire will rope correctly not operate as properly. shown, or brake will not operate properly. E K S S (hole dia.) (hole dia.) C Model 1 B 1 C D E F H 1 J K M n P R S (hole dia.) series in (mm) Model in (mm) 1 1 in (mm) B 1 1 in C(mm) C Din D(mm) E in E(mm) F in F (mm) H 1 H in 1 (mm) J J in (mm) K K in M(mm) M in N(mm) n Pin (mm) P R in (mm) R S (hole S (hole in (mm) dia.) dia.) 4WP2D WP2D8 series in (mm) 2.75 in (mm) 1 in 5.00 (mm) B 1 in C1.50 (mm) Din (mm) 9.50 E in (mm) F in (mm) H in (mm) J 5.81in (mm) K in M(mm) 1.25 in N(mm) P7.00 in (mm) R in (mm) S (hole in.41 (mm) dia.) 4WP2DC ( ) ( ) ( ) 4.00 ( 127 ) 5.00 ( 38.1 ) 3.50( ) ( ) ( ) ( ) ( ) 1.25 ( ) 7.00 ( ) ( ).41 ( ) 4WP2D WP2DC Dimensions WP2D8 are 4WP2DC for ( reference ) 4.00 ( only ) and ( subject ) 4.00 ( to ) change 5.00 ( without ) 3.50( notice ) ( ) ( ) 5.81( ) ( ) ( ) ( ) ( ).41 ( ) 1 Dimensions ( ) Dimensions, ( B and ) H ( are may for ) vary reference ( with 4.00 only motor ) and ( selection. subject ) ( to change ) 9.50 ( without ) notice. ( ) 2.25 ( ) ( ) ( ) ( ) ( ) ( ) 4WP2DC Dimensions are for reference only 1 Dimensions and ( subject ) to, ( change B and ) without H ( may notice. ) vary ( with motor ) ( 88.9 selection. ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 1 Dimensions, B and Dimensions H may vary are for with reference motor selection. only and subject to change without notice. 1 Dimensions, B and H may vary with motor selection. Fleet ngle Recommended Distance From Drum to Sheave motor F F Series 4WP2DC H D D M E drum C L Series Series 4WP2D Drum Dimensions 4WP2D Drum Dimensions M M K J drum C L C drum C L Drum Flange Drum Fleet ngle Model Diameter Drum Diameter Flange Width Drum Fleet Distance ngle Model Series 4WP2D Diameter Drum Diameter Dimensions Width Distance 2 2 (in) (mm) (in) (mm) (in) (mm) (ft) (m) model (in) (mm) drum (in) flange (mm) (in) drum (mm) fleet (ft) angle (m) 4WPD8 4WPD8 extension diameter diameter width distance WPD in 7.00 in 8.00 in 13 ft 4WPDC 4WPDC WPDC 2.50 in 7.00 in 5.50 in 9 ft Dimensions Dimensions Dimensions are for reference are for reference are only for and only reference subject and subject to change to change only without without and subject notice. notice. to change without notice. 2 2 Recommended Recommended 2 minimum minimum distance distance between between drum drum and lead and lead sheave sheave for for smooth drum. Recommended minimum distance between drum and lead sheave for smooth drum. Load E drum C L M drum C L drum C L Install wire rope correctly as shown, or brake will not operate properly. J P N N P P FLCL-0916 These products are not for lifting people or things over people. Complete, downloadable details on line 19

51 thern power winches Series 4WP2D High Speed Worm Gear Power Winches (Up to 1500 lb Capacity) tlas Model 4WP2D8-1500-40 shown with wire rope Direct Drive Design delivers high speed operation in

52 51 thern power winches Series 4WP2D High Speed Worm Gear Power Winches (Up to 1500 lb Capacity) tlas Model 4WP2D shown with wire rope Direct Drive Design delivers high speed operation in both directions, even under full load. Machine Cut Bronze Worm Gears provide accurate operation and long lasting service. Enclosed Oil Bath provides continuous lubrication of gears to minimize wear. Oil seals keep oil in and dirt out. Internal Mechanical Brake provides positive load control for lifting and lowering operations. Ball Bearings and self-aligning bronze bearings provide smooth and efficient operation. Pressure Plate applies pressure to drum and wire rope to help maintain uniform winding. Not available on clutch models. Dual Function Cable nchor for quick disconnect of wire rope with swaged ball fitting, or recessed cable anchor with set screw for wire rope with unfinished end. Mounting Options include floor, wall, or ceiling. Two-year Limited Warranty Cast luminum construction for lightweight strength. Wire rope assemblies sold separately Corrosion Resistant durable paint finish protects against corrosion in harsh environments. Large Diameter Drums minimize wear to the wire rope and help extend its life. Clutch Model allows operator to manually disengage the drum to rapidly unwind wire rope. Clutch models do not include pressure plates. Series 44WP2 4WP2 and and 4WP2T 4WP2T Performance Performance Characteristics Characteristics Model number Model number Extensions Load Rating Wire Line Speed Drum Capacity 2 pprox. Load Line Motor 1st Mid Full Rope 1st Full 1st Mid Full Ship Rating Speed Codes Motor Layer Drum Drum Dia. 1 Layer Drum Layer Drum Drum Weight 3 (lb) (kg) (fpm) (mpm) (hp) (lb) (kg) (lb) (kg) (lb) (kg) (in) (mm) (fpm) (mpm) (fpm) (mpm) (ft) (m) (ft) (m) (ft) (m) (lb) (kg) High Speed tlas winches for lifting or pulling 4WP2D ,B,D,E / WP2D D,E / WP2D D,E / WP2D B,D,E / High Speed Clutch Models for HORIZOnTL PULLInG OnLY 4WP2DC ,B,D,E / WP2DC D,E / WP2DC D,E / WP2DC B,D,E / When ordering, please indicate Model Number and Extensions. Examples: 4WP2D (without clutch); 4WP2DC (with clutch). Please contact Thern or nearest Thern Distributor for firm, fixed price and delivery. 1 Minimum wire rope diameter is 1/4 inch. 2 ctual drum capacities 25-30% less due to nonuniform winding. Wire rope tension will also affect drum capacity. 3 Weight may vary with motor. Control Options and ccessories Model Description 115/1/ /1/60 230/3/60 460/3/60 10L21 NEM 1 to 1.5 hp to 2 hp to 3 hp to 3 hp 10L7E1 NEM 1 to 1.5 hp to 3 hp to 5 hp to 7.5 hp 10L24 NEM 4 - watertight to 1.5 hp to 2 hp to 3 hp to 3 hp 10L7E4 NEM 4 - watertight to 1.5 hp to 3 hp to 5 hp to 7.5 hp 10P146 6-foot pendant control to 1 hp TPL-4WP2T8 Two-Part Line Kit Please contact Thern or nearest Thern Distributor for firm, fixed price and delivery. 4 Controls for 115V single phase motors up to 1 hp, include an 8-foot power cord with grounded plug. Motor Codes 115 volt 1 phase B 230 volt 1 phase D 230 volt 3 phase E 460 volt 3 phase F ll other voltages, please contact Thern. PN Please contact Thern Notes: Custom controls are available including wireless remote control, variable speed control, electronic overload, and enclosures for special environments

53 52 thern power winches Options and ccessories Emergency Hand Crank for manual operation in case of power failure. Two-Part Line Kit to convert to double line rigging. Not available for 4WP2 Series. Rotary Limit Switches for secondary shut-off to limit load travel in one or two directions. Not available on clutch models. Special Motors and Controls including severe duty and explosion proof. Special Finishes for hazardous environments Torque Limiters as part of the motor controls on electric models. Series 4WP2 Series 4WP2T8 Side View Rear View Top View B Install wire rope correctly as shown, or brake will not operate properly. H Install wire rope correctly as shown, or brake will not operate properly. (hole dia.) S M K J C drum C L M K C (hole dia.) S J N P H P drum C L drum C L D It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner s Manual supplied with the equipment before operating it. R Series 4WP2tc clutch models B F Install wire rope correctly as shown, or brake will not operate properly. M E (hole dia.) S M K C J N P H drum C L drum C L D Series 4WP2 and 4WP2T Dimensions Model 1 B 1 C D E F H 1 J K M N P R S (hole dia.) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) 4WP ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 4WP2T ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 4WP2TC ( ) ( ) 4.02 ( ) Dimensions are for reference only and subject to change without notice. 1 Dimensions, B and H may vary with motor selection ( ) 2.16 ( ) 6.43 ( ) ( ) 2.25 ( ) R B 5.81 ( ) F ( ) 1.25 ( ) Series 4WP2 and 4WP2T Drum Dimensions Model Drum Diameter Flange Diameter M 7.00 ( ) E Drum Width ( ).41 ( ) Fleet ngle Distance 2 (in) (mm) (in) (mm) (in) (mm) (ft) (m) 4WP WP2T WP2TC Dimensions are for reference only and subject to change without notice. 2 Recommended minimum distance between drum and lead sheave for smooth drum.

53 thern power winches Series 4WP2 and 4WP2T Worm Gear Power Winches (Up to 2000 lb Capacity) tlas Model 4WP2T8-2000-8 shown with wire rope 115 Volt Single Phase Electric Motor includes power cord

54 53 thern power winches Series 4WP2 and 4WP2T Worm Gear Power Winches (Up to 2000 lb Capacity) tlas Model 4WP2T shown with wire rope 115 Volt Single Phase Electric Motor includes power cord with grounded plug and a momentary contact-type push button pendant control on a control cord. Machine Cut Worm Gears provide accurate and long lasting service. operation Enclosed Oil Bath provides continuous lubrication of gears to minimize wear. Oil seals keep oil in and dirt out. Internal Mechanical Brake provides positive load control for lifting and lowering operations. Ball Bearings and self-aligning bronze bearings provide smooth and efficient operation. Pressure Plate on series 4WP2T8 only, applies pressure to drum and wire rope to help maintain uniform winding. Dual Function Cable nchor for quick disconnect of wire rope with swaged ball fitting, or recessed cable anchor with set screw for wire rope with unfinished end. Series 44WP2 and 4WP2T Performance Characteristics Mounting Options include floor, wall, or ceiling. Two-year Limited Warranty Cast luminum construction for lightweight strength. Corrosion Resistant durable paint finish protects against corrosion in harsh environments. Large Diameter Drums minimize wear to the wire rope and help extend its life. Clutch Model allows operator to manually disengage the drum to rapidly unwind wire rope. Clutch models do not include pressure plates. Load Rating Model Number Motor Description Motor Wire Line Speed Drum Capacity 2 pprox. HP 1st Mid Full Rope 1st Full 1st Mid Full Ship Layer Drum Drum Dia. 1 Layer Drum Layer Drum Drum Weight (lb) (lb) (lb) (in) (fpm) (fpm) (ft) (ft) (ft) (lb) 4WP2 3 includes controls / WP2T includes controls / TLS winch - 8" drum - for pulling or lifting 5/ WP2T includes controls / clutch model drum - for horizontal pulling only Motor Options Standard motor is 115/1/60 VC TENV. For other configurations, add motor code to model number when ordering. EX: 4WP2T PN (pneumatic winch) 5 B 5 D 5 E 5 F PN 6 DC 115 volt 1 phase no controls or power cord TENV 230 volt 1 phase no controls or power cord TEFC 230 volt 3 phase no controls or power cord TEFC 460 volt 3 phase no controls or power cord TEFC all other voltages or hertz 8-vane air motor with controls (mounted) 12 volt DC with 10-foot pendant control Notes: Custom controls are available including wireless remote control, variable speed control, electronic overload, and enclosures for special environments 1 Minimum wire rope diameter is 1/4 inch. 2 ctual drum capacities may be 25-30% less, due to nonuniform winding. Tension in wire rope will also affect drum capacity. 3 Model 4WP2, 115 VC motor includes 8-foot power cord with grounded plug and NEM 4 push button pendant control on 6-foot cord. 4 Models 4WP2T8 and 4WP2TC, 115 VC motor includes 16-foot power cord with grounded plug and push button pendant control on 16-foot cord. 5 Controls are sold separately for all non-standard electric motors (, B, D and E). See table below. 6 For PN models, ratings are for 80 cfm at 100 psi. Please contact Thern or nearest Thern Distributor for firm, fixed price and delivery. Control Options and ccessories Model Description pprox. Ship Wt. 10L21 7 NEM 1 control switch - mounted and wired 3 lb 10L24 7 NEM 4 watertight control switch - mounted and wired 7 lb TPL-4WP2T8 Two Part Line Kit not available for 4WP2 Series 4 lb 7 Controls for 115 volt, single phase, 60 cycle include 8-foot power cord with grounded plug. Please contact Thern or nearest Thern Distributor for firm, fixed price and delivery. Wire rope assemblies sold separately

55 54 thern power winches Series 477 Options and ccessories Emergency Hand Crank for manual operation in case of power failure. Does not include handle. Rotary Limit Switches for secondary shut-off to limit load travel in one or two directions. Special Motors and Controls including severe duty and explosion proof. Special Finishes for hazardous environments. Torque Limiters as part of the motor controls on electric models. L Series Winch Winch Dimensions Dimensions Model B C H K L P Q S (hole dia) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) in) (mm) (in) (mm) (in) (mm) (in) (mm) C-1PH C-1PH C-3PH DC PN HY DC Dimensions are for reference only and subject to change without notice. It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner s Manual supplied with the equipment before operating it. Series Series Drum Drum Dimensions Dimensions Model Drum Diameter Flange Diameter Drum Width Fleet ngle Distance 1 (in) (mm) (in) (mm) (in) (mm) (ft) (m) C-1PH C-1PH C-3PH DC PN HY DC Dimensions are for reference only and subject to change without notice. 1 Recommended minimum distance between drum and lead sheave for smooth drum.

55 thern power winches Dura-Hoist Model 4771 shown with wire rope Wire rope assemblies sold separately Model 4771PN Series 477 Helical/Worm Gear Power Winches (Up to 2000 lb Capacity) Machine Cut

Internal Mechanical Brake for positive load control. Cast luminum construction for lightweight strength, with durable paint finish to resist corrosion.

ccessory Options include limit switches, cable pressure plates, torque limiting controls, and manual overrides. Large Diameter Drums minimize wear to the wire rope and help extend its life.

56 55 thern power winches Dura-Hoist Model 4771 shown with wire rope Wire rope assemblies sold separately Model 4771PN Series 477 Helical/Worm Gear Power Winches (Up to 2000 lb Capacity) Machine Cut Gears for accurate and long lasting service. Enclosed Oil Bath provides continuous lubrication of gears to minimize wear. Oil seals keep oil in and dirt out. Internal Mechanical Brake for positive load control. Cast luminum construction for lightweight strength, with durable paint finish to resist corrosion. Ball Bearings ensure smooth and efficient operation. Series 4777 is designed with a 4-inch wide drum for tight fleet angle installations. ccessory Options include limit switches, cable pressure plates, torque limiting controls, and manual overrides. Large Diameter Drums minimize wear to the wire rope and help extend its life. Mounting Options include floor, wall, or ceiling. Two-year Limited Warranty Series Configurations and Performance Characteristics Load Rating Model number Motor Description Motor Wire Line Speed Drum Capacity 1 pprox. HP 1st Mid Full Rope 1st Full 1st Mid Full Ship Layer Drum Drum Dia. Layer Drum Layer Drum Drum Weight (lb) (lb) (lb) (in) (fpm) (fpm) (ft) (ft) (ft) (lb) /1/60 VC - 6 ft pendant / C-1PH 115/1/60 VC - less controls / C-1PH /230/1/60 VC - less controls / C-3PH 3 230/460/3/60 VC - less controls / DC 4 12 VDC - 10 ft pendant / PN 4,5 Pneumatic - less controls / HY 4,5 Hydraulic - less controls / /1/60 VC - 6 ft pendant / DC 4,6 12 VDC - 10 ft pendant / Please contact Thern or nearest Thern Distributor for firm fixed price and delivery. 1 ctual drum capacities may be 25-30% less, due to nonuniform winding. Tension in wire rope will also affect drum capacity. 2 Motor includes an 8-ft power cord with grounded plug and a push button pendant control on 6-ft cord. 3 For Models 4771C-1PH2 and 4771C-3PH, please specify voltage when ordering. 4 For pneumatic, hydraulic and DC models, line speed is based on rated load. ctual line speed varies with load weight and power supply. 5 For Model 4771PN, ratings are for 80 cfm at 100 psi. For Model 4771HY, ratings are for 4 gpm at 1000 psi. 6 Controls are separate. Series Controls Model Description pprox. Ship Wt. (lb) (kg) 10L21 6 NEM 1 control switch mounted and wired L24 6 NEM 4 watertight control switch mounted and wired PN-CNTRL Pneumatic control valve not mounted or plumbed, no hoses PN-HS6 6-ft hoses for pneumatic controls not plumbed HY-CNTRL Hydraulic control valve not mounted or plumbed, no hoses HY-HS6 6-ft hoses for hydraulic controls not plumbed 4 2 Please contact Thern or nearest Thern Distributor for firm, fixed price and delivery. 6 Controls for 115 volt, single phase, 60 cycle include an 8-ft power cord with grounded plub. Notes: Custom controls are available including wireless remote control, variable speed control, electronic overload, and enclosures for special environments.

57 56 thern WORM gear M L Model 2W40-L and 2W40-M J K S Model 2W40-BM and 2W40-BL 2W40 Series Worm Gear Hand Winches - Dimensions Model B C D E F G H J K L M S (hole dia) (in) (in) (in) (in) (in) (in) in) (in) (in) (in) in) (in) (in) (in) (in) (in) (in) 2W40-L / W40-M / W40-BL / W40-BM / Dimensions are for reference only and subject to change without notice. T Flange Dia Drum Width Drum Dia 2W40 Series Performance Characteristics - Drill Drive 1 Load Rating Drill Model: ED300-DW11 Model 1st Layer Mid Drum Full Drum RPM Volts 2 Duty Cycle (lb) (kg) (lb) (kg) (lb) (kg) Maximum 2W40-M ft of life or 5 min of operation 2W40-BM ft of life or 5 min of operation 1 Performance Characteristics refer to standard products. Non-standard products may vary from the original design. Contact Thern for this information. 2 Duty cycle includes lifting and lowering and may vary depending on load or application. llow components to cool between cycles. Dimensions are for reference only and subject to change without notice.

58 57 R HND WINCHES thern WORM Install wire rope gear correctly as shown, or brake will not operate properly. Model MWM2 E F B S Models 462 and 472 handle rotation C L J K C G H L M handle rotation UP C Models 462 and 472 G handle rotation C L E drum C L D T M J K (hole dia.) S in. hex input D H drum CL L S J K F B L M E handle rotation C L G Model 465 T drum C L C D H F B Model 4622PB Wire Rope Installation Model 465 S Model 4622PB J K L M C G handle rotation C L E handle rotation UP T D H drum CL bolt Wire Rope Installation Model 462 and 4633PB F B nstallation nsibility quipapplicas. mine Bethe udy pplied all re g to it. read the re operating it. Worm Worm Gear Gear Hand Worm Hand Winches Winches Gear Hand - Dimensions Dimensions Winches (in) Dimensions PB PB B 472 4WM2 4WM2 drum dia. 1.50(in) 1.50 (mm) (in) 1.50 (mm) 2.50(in) 4.00 (mm) (in) 4.00 (mm) 2.50 (in) (mm) flange Drum Diameter dia drum Flange width Diameter Drum Width B CB DC ED FE GF G H J K L M S (hole diameter) T Dimensions are for reference only and subject to change without notice. set screw Wire Rope Installation Model 472 Install wire rope correctly as shown, or brake will not operate properly. It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner s Manual supplied with the equipment before operating it.

Models 4WM2 and 2W40* can be power driven with a maximum 300 rpm drill-motor. utomatic Brake Models provide positive load control for lifting. Brake models have a PB or B suffix.

59 58 thern worm gear Worm Gear Hand Winches Machine Cut Worm Gears provide accurate operation and long lasting service. Enclosed Oil Bath provides continuous lubrication of gears to minimize wear, except on Model 465. On Models 4WM2 and 2W40, oil seals keep oil in and dirt out. Hex Drive and handle are included. Models 4WM2 and 2W40* can be power driven with a maximum 300 rpm drill-motor. utomatic Brake Models provide positive load control for lifting. Brake models have a PB or B suffix. Models 4WM2 and 2W40-B feature an internal mechanical brake. Corrosion Resistant durable paint finish protects against corrosion in harsh environments. Bronze Bearings on most models for smooth operation. Large Diameter Drums minimize wire rope wear. Handles djust in length to change force required to move the load. Mounting Options include floor, wall, or ceiling. dapter plate may be required, contact Thern. Two-year Limited Warranty. Model 2W40-BM Model 4WM2 shown with wire rope Model 465 Wire rope assemblies sold separately *See Drill Drive performance chart on page 11. Worm Gear Hand Winches Configurations and Performance Characteristics Model Description 1st Layer Load Rating Mid Drum Full Drum Wire Rope Dia. 1st Layer Drum Capacity 1 Mid Drum Full Drum Gear Ratio Force 2 to lift 1000 lbs pprox. Ship Weight (lb) (kg) (lb) (kg) (lb) (kg) (in) (mm) (ft) (m) (ft) (m) (ft) (m) (lb) (kg) (lb) (kg) lb open gears / : (recommended for pulling only) 3/ lb enclosed gearing / : (recommended for pulling only) 3/ PB 1000 lb enclosed gearing with brake / : (for lifting) 3/ lb enclosed gearing / : (recommended for pulling only) 1/ / WM lb enclosed gearing with brake / : (for lifting) Drill Driveable 3/16 (not recommended for this winch) 2W40-L 4000 lb enclosed gearing / : (recommended for pulling only) 3/ W40-BL 4000 lb enclosed gearing with brake / (for lifting) 3/ W40-M 4600 lb enclosed gearing / : (recommended for pulling only) Drill Driveable* 3/ W40-BM 4600 lb enclosed gearing with brake / (for lifting) Drill Driveable* 3/ Please contact Thern or nearest Thern Distributor for firm fixed price and delivery. 1 ctual drum capacities may be 25-30% less, due to nonuniform winding. Wire rope tension will also affect drum capacity. 2 pproximate handle force required to lift 1000 lb with an empty drum, and maximum handle length.

60 59 thern SPUR gear Model M4312PB, M4412PB ND M4312PBSS S L M Wire Rope Installation - Models M4312, M4312PB, M4312PBSS. M4412 ND M4412PB J K H G wire rope drum CL D C handle rotation CL E T Quick Disconnect nchor Models M4312 and M4412 F B S L M H J K G Flange Clip nchor C drum C L D F T B handle rotation CL E IMPORTNT: It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and It is the owner or operator s regulations. responsibility Be sure to read to determine the Owner s the suitability Manual supplied of the equipment with the equipment to its intended use. Study before all operating applicable it. codes, manuals and regulations. Be sure to read the Owner s Manual supplied with the equipment before operating it. Spur Spur Gear Gear Hand Hand Winches Winches - Dimensions Dimensions Model Drum Dia. Flange Dia. Drum Width B C D E F (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) M M4312PB M4312PBSS M M4412PB Model G 1 H 1 J K L M S (hole dia.) T (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) M M4312PB M4312PBSS M M4412PB Models M4312PB, M4312PBSS and M4412PB handles are adjustable. Dimension shown is for maximum handle length. Dimensions are for reference only and subject to change without notice.

61 60 thern SPUR gear Model M401 M S L Wire Rope Installation - Model M401 S L M Model M4042PBSS J T K F B Model M4022 and M4032 handle rotation CL E G Model M4022 and M4022 PB Base S D C H L M drum CL J K G H drum CL handle D C T E rotation CL F B Wire Rope Installation - Model M4042PBSS Quick Disconnect nchor wire rope G H J K Flange Clip nchor H handle rotation CL C E T F B Model M4022PB and M4032PB drum C L G J K C D drum C L Model M4032 and M4032 PB Base S D E T B F Wire Rope Installation - M4022, M4032,Model M4022PB and M4032PB L M handle rotation CL Spur Gear Hand Winches - Dimensions (in) M401 M401 M4022 M4022 M4022PB M4022PB M4032 M4032 M4032PB M4032PB M4042PBSS M4042PBSS drum Drum dia. Diameter flange Flange dia. Diameter drum width Drum Width B B C C D D E E F F G G H J H J K K L ML M S(hole dia.) T S (hole dia.) T Dimensions are for reference only and subject to change without notice. 1 Dimensions are for reference only and subject to change without notice. Models M401, M4022PB, M4032PB and M4042PBSS handles are 1 Models M401, M4022PB, M4032PB and M4042PBSS handles are adjustable. adjustable, Dimension shown is dimension for maximum handle shown length. is for maximum handle length. wire rope Quick Disconnect nchor Flange Clip nchor It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner s Manual supplied with the equipment before operating it.

Corrosion Resistant trivalent zinc plated finish protects against corrosion in harsh environments.

62 61 thern SPUR gear Spur Gear Hand Winches (Up to 2000 lb Capacity) Machine Cut Spur Gears for accurate and long lasting service. utomatic Brake Models provide positive load control for lifting and lowering operations. Brake models have a PB or B suffix. Corrosion Resistant trivalent zinc plated finish protects against corrosion in harsh environments. Quick Disconnect nchor 1 for quickly attaching or removing wire rope equipped with a swaged ball fitting. Worm Gear Hand Winches Bronze and Radial Ball Bearings provide smooth and efficient operation. Large Diameter Drums minimize wear to extend wire rope life. Gear Covers protect gears and help prevent injuries. Stainless Steel Models vailable for harsh environments, see models with SS suffix. Stainless steel models are electro-polished for added corrosion resistance. Two-year Limited Warranty Model M4022PB Model M4312PBSS Shown with wire rope Wire rope assemblies sold separately Model Description 1st Layer LOD RTInG Mid Drum Full Drum Wire Rope Dia. 1 1st Layer DRUM CPCITY 2 Mid Drum Full Drum Single Gear Ratio Double Gear Ratio Force 3 pprox. to lift Ship 1000 lb Weight (lb) (kg) (lb) (kg) (lb) (kg) (in) (mm) (ft) (m) (ft) (m) (ft) (m) (lb) (kg) (lb) (kg) M lb marine duty (for pulling only) / / M lb marine duty (for pulling only) / : / M4022PB 1000 lb marine duty with brake / : (for lifting) 3/ M lb marine duty (for pulling only) / : / M4032PB 1000 lb marine duty with brake / : (for lifting) 3/ M4042PBSS 1000 lb stainless steel with brake / : (for lifting) 3/ (sgl gear) 1/ M lb marine duty (for pulling only) / :1 14.7: / (dbl gear) 5/ M4312PB 2000 lb marine duty with brake / : (for lifting) 1/ (dbl gear) 5/ M4312PBSS 2000 lb stainless steel with brake / : (for lifting) 1/ (dbl gear) 5/ M lb marine duty (for pulling only) / :1 14.7: / (dbl gear) 5/ M4412PB 2000 lb marine duty with brake / : (for lifting) 1/ (dbl gear) 5/ Please contact Thern or nearest Thern Distributor for firm fixed price and delivery. 1 For Models M4022, M4022PB, M4032, M4032PB, ball end is available for 1/8-inch and 3/16-inch only. For Models 4042PBSS, M4312, M4312PB, M4312PBSS, M4412, M4412PB, ball end is available for 3/16-inch and 1/4-inch only. 2 ctual drum capacities may be 25-30% less due to nonuniform winding. Wire rope tension will also affect drum capacity. 3 pproximate handle force required to lift 1000 lbs with an empty drum and maximum handle length.

63 62 thern ir Winches BIG RED T Series UTILITY RTED ir Winch Performance Characteristics T2 Series T2H Series T2.5 Series T5 Series T7 Series Load Rating 1st Layer 7200 lb 3265 kg 3600 lb 1632 kg 7200 lb 3265 kg 18,000 lb 8164 kg 23,600 lb 10,704 kg Load Rating Mid-Drum 5700 lb 2585 kg 2900 lb 1315 kg 5900 lb 2676 kg 14,000 lb 6350 kg 19,000 lb 8618 kg Load Rating Full Drum 4700 lb 2131 kg 2400 lb 1088 kg 5000 lb 2268 kg 11,500 lb 5216 kg 15,900 lb 7212 kg Line Speed 1st Layer * 30 fpm 9.1 m/min 61 fpm 18.6 m/min 79 fpm 24.1 m/min 30 fpm 9.1 m/min 19 fpm 5.8 m/min Line Speed Mid-Drum * 38 fpm 11.6 m/min 77 fpm 23.5 m/min 96 fpm 29.3 m/min 39 fpm 11.9 m/min 24 fpm 7.3 m/min Line Speed Full Drum * 46 fpm 14.0 m/min 94 fpm 28.7 m/min 114 fpm 34.7 m/min 47 fpm 14.3 m/min 29 fpm 8.8 m/min Input HP 7.1 hp 7.1 hp 7.1 hp 7.1 hp 18.3 hp 18.3 hp 17.8 hp 17.8 hp 14.4 hp 14.4 hp Max Stall Pull 1st Layer 9000 lb 4082 kg 4500 lb ** 2041kg ** 11,000 lb 4,989 kg 33,000 lb 14,968 kg 38,000 lb 17,236 kg Pressure 90 psi 6.3 kgf/cm2 90 psi 6.3 kgf/cm2 90 psi 6.3 kgf/cm2 90 psi 6.3 kgf/cm2 90 psi 6.3 kgf/cm2 Flow 250 scfm 7.0 m3/min 250 scfm 7.0 m3/min 600 scfm 17.0 m3/min 550 scfm 15.6 m3/min 550 scfm 15.6 m3/min Pipe Inlet Size 1 in 25.4 mm 1 in 25.4 mm 1.5 in 38.1 mm 1.5 in 38.1 mm 1.5 in 38.1 mm Hose Size 1.25 in 31.8 mm 1.25 in 31.8 mm 1.5 in 38.1 mm 1.5 in 38.1 mm 1.5 in 38.1 mm Minimum Design Temp (-4 º) F (-20 º) C (-4 º) F (-20 º) C (-4 º) F (-20 º) C (-4 º) F (-20 º) C (-4 º) F (-20 º) C ** ** Estimated value. BIG RED T Series UTILITY RTED ir Winch Drum Capacities * Drum Width Wire Rope 16 in (407 mm) 24 in (610 mm) 30 in (762 mm) 36 in (915 mm) Model Diameter Breaking Strength** 1st Layer Mid Drum Full Drum 1st Layer Mid Drum Full Drum 1st Layer Mid Drum Full Drum 1st Layer Mid Drum Full Drum (in) (mm) (lb) (kg) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) T ,600 12, T2H ,600 12, T ,200 18, T ,800 26, T ,600 36, ** ** Values based on 6x37 IWRC EIPS wire rope. Model Drum Diameter Flange Diameter Drum Width Fleet ngle Distance (in) (mm) (in) (mm) (in) (mm) (ft) (m) T T T2H T2H T T T T T T T T BIG RED T10 Series UTILITY RTED ir Winch Fleet ngle Requirements

64 63 thern ir Winches F C (drum C) L S (hole dia) Z1 B P N L L L J Z2 Y1 H Y2 D M T E BIG RED T Series UTILITY RTED ir Winch Dimensions Model B C D E F H J L (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) T T T2H T2H T T T T T T T T M N P S (hole diameter) T Y1 Y2 Z1 Z2 Bolts Bolt Size Weight * (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (degrees) (degrees) (qty) (in - G8) (lb) (kg) T / T / T2H / T2H / T / T / T / T / T / T / T / T /

65 64 thern ir Winches BIG RED T10 Series Performance Characteristics T10 Series Load Rating 1st Layer 37,000 lb 16,783 kg Load Rating Mid-Drum 27,400 lb 12,428 kg Load Rating Full Drum 21,800 lb 9,888 kg Line Speed 1st Layer * 20 fpm 6.1 m/min Line Speed Mid-Drum * 27 fpm 8.2 m/min Line Speed Full Drum * 34 fpm 10.4 m/min Input HP 27 hp 27 hp Max Stall Pull 1st Layer 63,000 lb ** 28,576 kg Pressure 90 psi 6.3 kgf/cm2 Flow 900 scfm 25 m3/min Pipe Inlet Size 1.5 in 38.1 mm Hose Size 1.5 in 38.1 mm Minimum Design Temp (-4 º) F (-20 º) C ** Line speeds vary based on conditions of air supply. Line speeds may run up to 20% BIG RED T10 Series Fleet ngle Requirements Model Rope Diameter Flange Diameter Drum Width Fleet ngle Distance (in) (mm) (in) (mm) (in) (mm) (ft) (m) T T T Center Line Fleet ngle Recommended Fleet ngle Distance Lead Sleeve Load ** Estimated value. BIG RED T10 Series ir Winch Drum Capacities * Drum Width Wire Rope 30 in (762 mm) 40 in (1016 mm) 60 in (1524 mm) Model Diameter Breaking Strength** 1st Layer Mid Drum Full Drum 1st Layer Mid Drum Full Drum 1st Layer Mid Drum Full Drum (in) (mm) (lb) (kg) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) (ft) (m) T10 1-1/ ,000 58, * ** Values based on 6x37 IWRC EIPS wire rope. BIG RED T10 Series ir Winch Dimensions Model B C D E H1 H2 J L (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lb) (kg) T T T M P S (hole diameter) Y1 (man) Y1 (auto) Y2 # Bolts Bolt Size Weight * (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (lb) (kg) T /8 - G T /8 - G T /8 - G

66 65 thern ir Winches C (drum C) L S Y1 uto P B H2 J L L L L M J E Y1 Man Y2 H1 D

67 66 thern ir Winches Up to 37,000 lb Capacity Thern ir (T) Winches Thern is a small company with a big reputation for quality and quick turn-around times especially on custom winches. Thern strives to deliver world-class custom winches in off-the-shelf time. Radial Piston Motor Precise Control Valve utomatic Disc Brake Manual Band Brake Welded Steel Frame Planetary gears Meets SME 30.7 Requirements 2-Year Warranty Big Red Thern ir Winch T Series Big Red Thern ir T10-40X1 with automatic band brake Made in the US

68 67 thern ir Winches Legacy Series UTILITY Drum Width (inches) Winch Load Rating Winch Model HP (Full Drum) Line Speed T2 Series ,700 lbs fpm T2H Series ,400 lbs fpm T2.5 Series ,000 lbs fpm T5 Series ,500 lbs fpm T7 Series ,900 lbs fpm C B Features and BenefiTS Radial Piston Motor () Internally lubricated for reliable power and an exceptionally long service life. Precise Control Valve (B) Count on smooth control with variable speed, making it ideal for both precision spotting and long lifts. Manual Band Brake (C) The heavy duty, long handled steel band brake requires less force to engage and provides up to 150% holding capacity. Welded Steel Frame Captures both drum ends for optimal strength and security. Planetary Gears Compact design and high efficiency gearing reduce power loss and heat generation while increasing service life. Gears operate in oil bath. Double lip oil seals keep oil in and contaminants out. Meets SME 30.7 Requirements Standard units designed and built to meet this specification. 2-Year Warranty Leading the industry with our Move It with Confidence Two Year Limited Warranty.

68 thern ir Winches Legacy Series D Every job is different, so we allow you to build the Thern BIG RED T Series air winches to suit your specific needs using our extensive line of accessories and

E OPTIONS ND CCESSORIES utomatic Disc Brake (D) Spring engaged, air pressure released and oil cooled for extended duty cycles and long life.

Mufflers (F) ttached to the exhaust ports to reduce noise. Control Options (G) Winch mounted, full flow remote pendant control valve.

69 68 thern ir Winches Legacy Series D Every job is different, so we allow you to build the Thern BIG RED T Series air winches to suit your specific needs using our extensive line of accessories and options. The better suited the winch, the better completed the task. E OPTIONS ND CCESSORIES utomatic Disc Brake (D) Spring engaged, air pressure released and oil cooled for extended duty cycles and long life. utomatic Band Brake (E) Spring engaged, air pressure released, with heavy-duty construction that provides up to 150% holding capacity (replaces manual brake). Mufflers (F) ttached to the exhaust ports to reduce noise. Control Options (G) Winch mounted, full flow remote pendant control valve. Marine Grade Epoxy pplied with a zinc primer for ultimate protection in harsh environments. Drum Guard (H) Heavy-duty steel mesh helps to protect operators. djusts for different rope payout angles. Filter, Regulator and Lubricator (I) Maintains air quality to the winch. Required for warranty compliance. Line Guide (J) Steel construction and hand operated to help wire rope unwind uniformly. Stackable Construction Winch Cage Protects motor and winch during operation. Movable with forklift. G F H J I

70 69 thern ir Winches T10 Series T10-40MX1 shown with manual band brake for positive load control. The addition of the T10 to the T Series from Thern gives users more options than ever before. Featuring new design elements, including frame design, rotary cable anchor, and lifting eyes, the T10 adds flexibility and ease of use while retaining all of the rugged features found on our T Series winches. Drain and fill plug location makes maintenance easy. B Rotary cable anchor for easy installation from either direction. Features and BenefiTS High Capacity Radial Piston Motor Internally lubricated for reliable power and long service life providing high capacity with faster line speeds. Precise Control Valve Count on smooth control with variable speed, for precision spotting or long lifts. Manual Band Brake Heavy-duty handle allows for manual brake operation and provides 150% load holding capacity. Brake can be modified to operate from either side. Easy ccess Drain and Fill Plug () New configuration provides easier access for maintenance; drain and fill plugs now located outside of drum, eliminating need to remove wire rope for maintenance. Planetary Gears Compact design and high efficiency gearing reduce power loss and heat generation while increasing service life. Gears operate in oil bath. Double lip oil seals keep oil in and contaminants out. Rotary Cable nchor (B) Innovative cable anchor design is self adjusting for various cable sizes. nchor is corrosion resistant for operation in harsh environments. Welded Steel Frame Captures both drum ends for strength and security. Frame includes convenient lifting eyes for easy handling. Meets SME 30.7 Requirements Standard units designed and built to meet this specification. 2-Year Warranty Leading the industry with our Move It With Confidence Two-Year Limited Warranty.

70 thern ir Winches T10 Series T10 Ser Every job is different, so we allow you to order Thern BIG RED T10 air winches to suit your specific needs with a vast array of options and accessories.

71 70 thern ir Winches T10 Series T10 Ser Every job is different, so we allow you to order Thern BIG RED T10 air winches to suit your specific needs with a vast array of options and accessories. From automatic brake options to a pendant control, we ll work with you every step of the way to make sure you get exactly what you require. T10-40X1 shown with automatic band brake. Mufflers help reduce noise during operation. C Options and ccessories utomatic Disc Brake Spring engaged, air pressure released and oil cooled for extended duty cycles and long life. utomatic Band Brake Spring engaged, air pressure released, with heavy-duty construction that provides up to 150% holding capacity (replaces manual band brake). Mufflers (C) ttached to exhaust ports to reduce noise. Control Options (D) Winch mounted, full flow remote pendant control valve. Marine Grade Epoxy pplied with a zinc primer for ultimate protection in harsh environments. Drum Guard Heavy-duty steel mesh helps to protect operators. djusts for different rope payout angles. Filter, Regulator and Lubricator (E) Maintains air quality to the winch. Required for warranty compliance. Multiple Drum Compartments llow for multiple line connections and operation. D E Convenience of pendant controls for remote operation. Protect motor from contaminants with Filter-Regulator-Lubricator.

72 Fall PROTECTION EQUIPMENT

retail sale: Harnesses Lanyards Self-retracting lifelines Vertical

Confined space & rescue Rooftop anchors Visit our website to view

Fall Protection Division or visit www.northernstrands.

73 72 fall protection equipment Fall Protection t Northern Strands we carry all types of fall protection equipment and accessories for retail sale: Harnesses Lanyards Self-retracting lifelines Vertical & horizontal nchorage Connectors Fall protection/roofer kits Confined space & rescue Rooftop anchors Visit our website to view our suppliers catalogues or contact us today and we will help you find the ideal fall protection products to suit your needs. To inquire about engineered fall protection systems contact our Fall Protection Division or visit Northern Strands is a retailer of the most trusted fall protection equipment brands in the industry. Our suppliers include: Miller Fall Protection Capital Safety DBI Sala

74 Synthetic ROPES

74 ll rope end fittings spliced into rope at Northern Strands Saskatoon Manufacturing plant. Dyneema Winch Lines.

Ropes, Slings, Climbing Rope, Utility Rope.

5/16 x 50 5/16 x 75 5/16 x 100 3/8 x 50 3/8 x 75 3/8 x 100 The Benefits of Dyneema Rope: Upgrade your Winch with stronger Synthetic Winch

75 74 ll rope end fittings spliced into rope at Northern Strands Saskatoon Manufacturing plant. Dyneema Winch Lines. vailable at Northern Strands 12-strand Dyneema Rope Uses: Winch Line, nchor Line, Dock/Mooring Line, Tow Rope, Lanyards, Hand Lines, Hoisting Ropes, Slings, Climbing Rope, Utility Rope. ll rope comes with hook, latch, thimble 3/16 x 50 3/16 x 75 3/16 x 100 1/4 x 50 1/4 x 75 1/4 x 100 Other sizes and lengths available. 5/16 x 50 5/16 x 75 5/16 x 100 3/8 x 50 3/8 x 75 3/8 x 100 The Benefits of Dyneema Rope: Upgrade your Winch with stronger Synthetic Winch Rope than Traditional Steel Cables. The Synthetic Dyneema Rope won t Kink, Curl or Splinter. Extremely Light, Floats in Water. Minimal Stretch and Non Rotation. Easy to Handle Splice, No Sharp Frays. Ggood Resistance to UV and Chemicals. Workable below -20 degree centigrade.

braided polyester rope designed for general marine, industrial, and commercial use where

Constructed from the highest quality UV stabilized yarns. Larger sizes available.

38 Low Elongation High Strength Excellent Dielectrics brasion Resistance UV Stabilized

Method: Retrieval Lines Double Braid Class 1 Towing Size Circ. Inch pprox. Weight pprox.

76 75 Ever been stuck? DOUBLE braided polyester tow rope (WITH or without padded eyes) Our premium double braided polyester rope designed for general marine, industrial, and commercial use where low elongation, high strength, and abrasion resistance are required. Constructed from the highest quality UV stabilized yarns. Larger sizes available. Custom lengths available upon request. Features: Specific Gravity of 1.38 Low Elongation High Strength Excellent Dielectrics brasion Resistance UV Stabilized Cover vailable Suggested Uses: Vehicle Recovery Winch Lines Eye Splice Pulling Lines Method: Retrieval Lines Double Braid Class 1 Towing Size Circ. Inch pprox. Weight pprox. vg. Tensile Strength Dia. In Dia. MM Lbs/100ft Kg/100M Lbs Kg 3/ / ,800 9, ,200 17, / / ,500 25, / / ,000 35,380

76 For those big tow jobs 8 Strand Tow Rope Our premium 8 Strand Tow rope is manufactured

light resistance Highly flexible, easy to handle 50% better breaking strength compared to

lines Equipment towing Tractor towing Technical Specs: Class II Rope Specific Gravity: 0.

Required Eye splice 8-strand/Class II Rope End for End splice 8-strand/Class II Rope Dia.

77 76 For those big tow jobs 8 Strand Tow Rope Our premium 8 Strand Tow rope is manufactured from high tenacity polypropylene yarns, Superdan offers easy handling, high strength and excellent abrasion resistance. Features: Excellent anti-abraision properties contribute to longer working life High UV light resistance Highly flexible, easy to handle 50% better breaking strength compared to BS and ISO standards pplications: Mooring lines General and commercial fishing rope nchor lines Equipment towing Tractor towing Technical Specs: Class II Rope Specific Gravity: 0.91 Elastic Elongation Percentage: t % of breaking strength 20-22% Splicing Procedures Required Eye splice 8-strand/Class II Rope End for End splice 8-strand/Class II Rope Dia. Circ. Dia. mm Weight per 100 ft. Min. Break Strength/LBS 1-5/ , , / , / , ,100

77 3 Strand general purpose poly rope Features: Color yellow 100% high

Recreation Hunting General construction Tarping Camping Boating

(floats) Easy to splice Eye splice End for end splice Size Length 3/16

78 77 3 Strand general purpose poly rope Features: Color yellow 100% high tenacity monofilament fiber Holds knots well Floats pplications: Recreation Hunting General construction Tarping Camping Boating Technical Specifications: General purpose poly Specific gravity: 98 (floats) Easy to splice Eye splice End for end splice Size Length 3/ Ft. 1/ Ft. 5/ Ft. 3/8 630 Ft. 1/2 335 Ft. 5/8 200 Ft. 3/4 125 Ft.

Tow Straps 78 Benefits of Northern Strands Tow Straps: Do not absorb water Polyester slings

Common Tow Straps in stock. Other sizes available upon request.

50 Yellow 2 Ply, 48,000lbs Yellow 3 x 20 2 Ply, 48,000lbs Yellow 3 x 30 Grey 2 Ply, 64,000lbs

Brown 6 x 50 Blue 2 Ply, 128,000lbs Blue 8 x 30 2 Ply, 128,000lbs Blue 8 x 50 Orange 2 Ply,

79 Tow Straps 78 Benefits of Northern Strands Tow Straps: Do not absorb water Polyester slings that reduce stretching Padded eye to reduce wear Tagged and certified for breaking strength Common Tow Straps in stock. Other sizes available upon request. Green 2 Ply, 32,000lbs Green 2 x 20 2 Ply, 32,000lbs Green 2 x 30 2 Ply, 32,000lbs Green 2 x 50 Yellow 2 Ply, 48,000lbs Yellow 3 x 20 2 Ply, 48,000lbs Yellow 3 x 30 Grey 2 Ply, 64,000lbs Grey 4 x 30 2 Ply, 64,000lbs Grey 4 x 50 Brown 2 Ply, 96,000lbs Brown 6 x 30 2 Ply, 96,000lbs Brown 6 x 50 Blue 2 Ply, 128,000lbs Blue 8 x 30 2 Ply, 128,000lbs Blue 8 x 50 Orange 2 Ply, 160,000lbs Orange 10 x 30 2 Ply, 160,000lbs Orange 10 x 50 2 Ply, 192,000lbs Orange 12 x 30 2 Ply, 192,000lbs Orange 12 x 50

80 crosby Rigging PRODUCTS

80 Crosby Hooks and Swivels S-7 BULLET STYLE JW & JW Dimensions (in.) Working Load Wire S-7 Rope Weight Each Dimensions (in.) BULLET STYLE JW & JW (lbs.) B C D E F G Working.

19.56.50.44.81 S-7 Bullet Style Jaw & Jaw 3.0.75 1/2 1/4 3.8 1.1 2.00 1.31 3.56 5.44 4.44 7.06.44.81.31.75.38.63.56.94 1.5 S-7 3/8 1.8 1.63 4.06 5.19.56.50.44.81 5.0 5/8 8.0 2.50 7.75 10.

81 80 Crosby Hooks and Swivels S-7 BULLET STYLE JW & JW Dimensions (in.) Working Load Wire S-7 Rope Weight Each Dimensions (in.) BULLET STYLE JW & JW (lbs.) B C D E F G Working.45Load Wire 1/8 Rope Weight.4 Each Limit (Tons)* Size (in.) (lbs.) B C D E F G.75 1/ / / S-7 Bullet Style Jaw & Jaw /2 1/ S-7 3/ / Dimensions 1.13 (in.) BULLET STYLE 1/2 JW & JW / Working 5.0Load Wire Rope Weight Each 10 5/8 7/ Limit (Tons)* 8.5 Size (in.) (lbs.) B C D E F G 15 3/ / /4 7/ / / /4 3/ *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit /2 1/ *Ultimate Load 5.0 is 5 times the Working 5/8Load Limit. Individually 8.0 Proof Tested 2.50to 2 times 7.75 the Working 10.06Load Limit / / S-11 15Thimble & Jaw / S-11 S Thimble & 1-1/2 Jaw Dimensions 2.38 (in.) THIMBLE & JW *Ultimate Load is 5 times the Working S-11 Load Limit. Individually Proof Tested to 2 times the Working Load Limit. Working Load Wire Rope Weight Each Dimensions (in.) THIMBLE & JW Limit (Tons)* Size (in.) (lbs.) B C D E F G Working 8.5Load Wire 3/4 Rope Weight 18.0 Each S-11 Limit (Tons)* Thimble & Size Jaw (in.) (lbs.) B C D E F G S-11 3/ *Ultimate Load is 5 times Dimensions (in.) 15 THIMBLE the Working 1& Load JW Limit. Individually Proof Tested to 2 times the Working Load Limit *Ultimate Working Load Load is 5 times the Working Wire Rope Load Limit. Weight Individually Each Proof Tested to 2 times the Working Load Limit. Limit (Tons)* Size (in.) (lbs.) B C D E F G 8.5 3/ *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit. Limit (Tons)* Size (in.) Crosby ngular Contact Bearing Swivels F F E E G G B B D D C C S-7 Bullet Style Jaw & Jaw S-7 Bullet Style Jaw & Jaw S-14 Thimble & Bullet S-14 S-14 Thimble & Bullet Crosby ngular Contact Bearing Swivels Crosby ngular Contact Bearing Swivels Dimensions (in.) THIMBLE & BULLET Working Load Wire S-14 Rope Weight Each Dimensions (in.) Limit (Tons)* THIMBLE Size (in.) & BULLET (lbs.) B C D E F G Working 8.5Load Wire 3/4 Rope Weight 20.0 Each Limit (Tons)* Size (in.) (lbs.) B C D E F G / / *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit / *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit. S-17 Bullet Style Jaw & Jaw Slurry Swivel S-17 Bullet Style Jaw & Jaw Slurry Swivel about the shaft. The threaded cap is sealed with a silicone sealant and secured with a set screw. The swivels are about the shaft. The threaded cap is sealed with a silicone sealant and secured with a set screw. The swivels are S-17 Dimensions (in.) BULLET JW & SLURRY SWIVEL Working Load Wire S-17 Rope Weight Each Dimensions (in.) Limit (Tons)* BULLET JW Size & SLURRY (in.) SWIVEL (lbs.) B C D E F G Working 8.5Load Wire 3/4 Rope Weight 14.5 Each Limit (Tons)* Size (in.) (lbs.) B C D E F G / / / / / *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.

82 81 Crosby Hooks and Swivels Crosby ngular Contact Bearing Swivels S-5 Eye & Eye S-5 EYE & EYE Dimensions (in.) Working Load Wire Rope Weight Each Limit (Tons)* Size (in.) (lbs.) B C D E F G.45 1/ / / / / / / / / *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit. S-6 Eye & Hook S-6 Eye & Hook S-6 EYE & HOOK Dimensions (in.) Working Load Limit (Tons)* Wire Rope Size (in.) Weight Each (lbs.) B C D E F G H Deformation Indicator Replacement Latch Kit Stock No..45 1/ / / / / / / / / *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.

83 82 Crosby Hooks and Swivels Crosby ngular Contact Bearing Swivels E F B K I D J H G L C S-3 Jaw & Eye S-3 JW & EYE Dimensions (in.) Working Wire Load Rope Weight Limit Size Each (Tons)* (in.) (lbs.) B C D E F G H I J K L.45 1/ / / / / / / / / *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit. S-4 Eye & Jaw S-4 Eye & Jaw S-4 EYE & JW Dimensions (in.) Working Wire Load Rope Weight Limit Size Each (Tons)* (in.) (lbs.) B C D E F G H I J K L.45 1/ / / / / / / / / *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit. S-5 Eye & Eye S-5 EYE & EYE Dimensions (in.) Working Load Limit (Tons)* Wire Rope Size (in.) Weight Each (lbs.) B C D E F G.45 1/ / / / / / / / / Saskatoon Millar venue, Saskatoon S-6 EYE SK & HOOK S7K 5Y3 Regina Dimensions Henderson (in.) Drive, Regina SK S4N 5W4 FX: (306) Ph: (306) Working Toll Wire Free: Weight FX: (306) Ph: (306) Deformation Toll Free: Replacement Load Rope Each Indicator Latch Kit Limit (Tons)* Size (in.) (lbs.) B C D E F G H Stock No..45 1/ /

84 83 Crosby Hooks and Swivels Crosby ngular Contact Bearing Swivels Wide range of product available. - Capacity: 0.45 through 35 tons - Wire Rope Sizes: 1/8 through 1-1/2 Individually Proof Tested to 2 times the Working Load Limit with certification. Desig Factor of 5 to 1. Entire swivel is Zinc plated to resist corrosion. ngular contact bearings maximize efficiency, reliability and service life of swivel and extend the S-1 Jaw & Hook Working Load Limit S-1 JW & HOOK Wire Rope Size Dimensions (in.) Weight Deformation Replacement Each Indicator Latch Kit (Tons)* (in.) (lbs.) B C D E F G H I Stock No..45 1/ / / / / / / / *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit. S-2 Jaw & Jaw life of the wire rope. S-20 Thimble Insert Designed for high rotation speed: Lower torque required to initiate rotation. Hook models utilize genuine Crosby hooks which are forged alloy steel, Quenched and Tempered and contain patented QUIC-CHECK markings. Each swivel 8.5 tons and larger, is furnished with a pressure lubrication fitting. When terminating with wire rope clips, we recommend the use of the Thimble Insert. The result will be extended wire rope life. llows standard swivel to be used in application requiring a thimble fitting. For use with our Bullet Style (S-7) and Jaw Style (S-1, S-2, S-3 & S-4) swivels. Machined from carbon steel. Zinc plated. S-2 JW & JW Dimensions (in.) Working Wire Load Rope Weight Limit Size Each (Tons)* (in.) (lbs.) B C D E F G H / / / / / / / / *Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.

84 Crosby Hooks and Swivels Crosby Swivels Equipped With Tapered Roller Thrust Bearing S-4 Eye & Jaw Working Wire Dimensions Load Rope Weight (in.) Swivel Limit Size Each No. (t)* (in.) (lbs.

81 2.12 1.38 1.25 1.41 1.62 1.50 10-S-4 10 7/8 44.00 16.12 4.50 1.50 1.75 3.38 3.50 1.75 1.69 1.69 2.75 1.88 15-S-4 15 1 61.00 16.75 5.00 1.50 1.75 3.38 3.50 1.75 1.94 2.03 2.75 2.12 25-S-4 25-135.

00 3.00 *Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. S-5 Eye & Eye Working Wire Dimensions Load Rope Weight (in.

62 1.50 10-S-5 10 7/8 42.00 15.50 4.50 1.69 1.69 2.75 1.88 15-S-5 15 1 49.00 16.38 5.00 1.94 2.03 2.75 2.12 25-S-5 25-130.00 22.25 6.00 2.25 2.31 3.88 2.38 35-S-5 35-145.00 22.25 6.50 2.25 2.31 3.88 2.38 45-S-5 45-215.

85 84 Crosby Hooks and Swivels Crosby Swivels Equipped With Tapered Roller Thrust Bearing S-4 Eye & Jaw Working Wire Dimensions Load Rope Weight (in.) Swivel Limit Size Each No. (t)* (in.) (lbs.) C G H J K N O Q R S T 3-S-4 3 1/ S-4 5 5/ S-4 8-1/2 3/ S / S S S S *Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. S-5 Eye & Eye Working Wire Dimensions Load Rope Weight (in.) Swivel Limit Size Each No. (t)* (in.) (lbs.) D G Q R S T 3-S-5 3 1/ S-5 5 5/ S-5 8-1/2 3/ S / S S S S *Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. S-6 Eye & Hook Working Wire Dimensions Load Rope Weight (in.) Swivel Limit Size Each No. (t)* (in.) (lbs.) E F G L M P Q R S T V 3-S-6 3 1/ S-6 5 5/ S-6 8-1/2 3/ S / S S S S *Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.

85 Crosby Hooks and Swivels Crosby Swivels Equipped With Tapered Roller Thrust Bearing Suitable for frequent rotation under load.

Pressure lube fitting provided. NOT TO BE USED ON DEMOLITION (WRECKING) BLLS. Other types and capacities up to 1250t, available to meet your requirements.

S-1 Jaw & Hook Working Wire Dimensions Load Rope Weight (in.) Swivel Limit Size Each No. (t)* (in.) (lbs.) F G H J K L M N O P V 3-S-1 3 1/2 9.81 11.44 4.84 2.75.75.88 1.62 1.53 1.41 1.

75 19.75 8.34 4.50 1.50 1.75 3.38 2.59 2.41 3.50 1.75 2.59 1.94 15-S-1 15 1 73.75 22.24 10.34 5.00 1.50 1.75 3.38 2.81 3.19 3.50 1.75 3.00 2.38 25-S-1 25-140.00 26.78 13.62 6.00 2.00 2.00 4.

06 3.25 *Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. S-2 Jaw & Jaw Working Wire Dimensions Load Rope Weight (in.

62 4.00 1.00 1.56 2.81 2.12 1.38 10-S-2 10 7/8 45.75 16.75 4.50 1.50 1.75 3.38 3.50 1.75 15-S-2 15 1 62.75 17.12 5.00 1.50 1.75 3.38 3.50 1.75 25-S-2 25-140.00 20.75 6.00 2.00 2.00 4.

Ultimate Load is 5 times the Working Load Limit. S-3 Jaw & Eye Working Load Wire Rope Weight Dimensions (in.) Swivel No. Limit (t)* Size (in.) Each (lbs.

90 12.25 4.00 1.00 1.56 2.81 2.12 1.38 1.25 1.41 1.62 1.50 10-S-3 10 7/8 43.50 16.12 4.50 1.50 1.75 3.38 3.50 1.75 1.69 1.69 2.75 1.88 15-S-3 15 1 61.00 16.75 5.00 1.50 1.75 3.38 3.50 1.75 1.94 2.

86 85 Crosby Hooks and Swivels Crosby Swivels Equipped With Tapered Roller Thrust Bearing Suitable for frequent rotation under load. ll swivels individually proof tested with labeled documentation. ll hooks furnished with latches assembled. ll jaws complete with bolts, nuts and cotter pins. Pressure lube fitting provided. NOT TO BE USED ON DEMOLITION (WRECKING) BLLS. Other types and capacities up to 1250t, available to meet your requirements. IMPORTNT - Crosby Swivels should only be used with the recommended wire rope. Contact the wire rope manufacturer for the proper wire rope to be used with Crosby Swivels. S-1 Jaw & Hook Working Wire Dimensions Load Rope Weight (in.) Swivel Limit Size Each No. (t)* (in.) (lbs.) F G H J K L M N O P V 3-S-1 3 1/ S-1 5 5/ S-1 8-1/2 3/ S / S S S S *Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. S-2 Jaw & Jaw Working Wire Dimensions Load Rope Weight (in.) Swivel Limit Size Each No. (t)* (in.) (lbs.) B G H J K N O 3-S-2 3 1/ S-2 5 5/ S-2 8-1/2 3/ S / S S S S *Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. S-3 Jaw & Eye Working Load Wire Rope Weight Dimensions (in.) Swivel No. Limit (t)* Size (in.) Each (lbs.) C G H J K N O Q R S T 3-S-3 3 1/ S-3 5 5/ S-3 8-1/2 3/ S / S S S S *Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.

87 86 Crosby Hooks and Swivels Crosby Forged Swivels G-401 Chain Swivels G-401 Chain Swivels the performance of Type Hot Dip galvanized. Crosby products meet or exceed the performance all requirements of SME of B30.26 including identification, Type ductility, design factor, proof load and temperature requirements. Importanty, Crosby products meet other critical performance Quenched & Tempered requirements, including fatique life, impact properties and material traceability, not addressed by SME B G-401 Chain Swivels Meets the performance requirements of Federal Speciication RR-C-271F, Type VII, Class 1, except for those provisions required of the contractor. G-402 Regular Swivels Meets the performance requirements of Federal Speciication RR-C-271F, Type VII, Class 2, except for those provisions required of the contractor. Working Dimensions Load Working Weight Dimensions (in) Size Limit Load Each Weight (in) (in) Size (lbs.)* Limit (lbs.) Each B C D E G J M R U V 1/4(in) 850 (lbs.)* Working.13(lbs.) B.75 C.62 D 1.12 E Dimensions.25 G.69 J.31 M 2.25 R 1.69 U1.25 V 5/161/ Load.25Weight (in) Size Limit Each 3/85/16 (in) (lbs.)* (lbs.) B C D E G J M R U V 1/23/8 1/ /81/ / /45/ / * 3/ / * 5/ / * G-402 Regular Swivels G-402 Regular Swivels the performance of Type the performance of Type Working Dimensions Size Load Working Limit Load Weight Each Weight Dimensions (in.) (in.) (in.) Size 1/4(in.) (lbs.)* Limit 850 (lbs.)* (lbs.) Each.21(lbs.) 1.25 B.69 B C.75 C D 1.06 D J.69 J M.31 M R 2.94 R S 1.69 S 5/161/ /85/ /23/ /81/ /45/ /83/ / / /2+ 1-1/ * 1-1/ * G-403 Jaw End Swivels Meets the performance requirements of Federal Speciication RR- C-271F, Type VII, Class 3, except for those provisions required of the contractor. G-403 Jaw End Swivels G-403 Jaw End Swivels the performance of Type the performance of Type Dimensions Working Load WorkingWeight Dimensions (in.) (in.) Size Limit Load Each Weight (in.) Size (lbs.)* Limit (lbs.) Each B C G J K L M N P R U V 1/4(in.) 850 (lbs.)*.21(lbs.) B.75 C.69 G.69 J.47 K1.03 L.31 M.88 N.25 P2.63 R1.69 U 1.69 V 5/161/ /85/ /23/ /81/ /45/ /83/ / / /2 1-1/ * 1-1/ *

88 87 Crosby rigging accessories Forged G-400 Eye Nut Eye Nuts Forged Steel - Quenched ìsî and Std. Tempered. Tap Working Weight Dimensions (in.) Size Stock Size Size Load Limit Per 100 Hot Dip No. galvanized. (in.) (in.) (lbs.)* (lbs.) C D E F J K N T W Tapped with standard UNC class 2 threads after galvanizing / lso available 3 in blank.38 (as forged) 1/2 item (S-4028) 2250 or on request.28 with 2.00metric 1.25 threading 1.44 (M-400) G / Eye Nut Recommended 5 for.63 In-Line pull. 3/ / Meets or 7 exceeds all.88requirements 1 of SME B30.26 including 2.69 identification, ductility, 3.06 design 2.21 factor, 1.56 proof 2.13 load and 2.02 temperature requirements Importantly, 8 these 1.00 products 1-1/4 meet other critical performance 4.38 requirements including 3.50 fatigue 2.46 life, 1.88 impact 2.38 properties 2.27 and 1.25 material 5.78 traceability, 1.38 not addresses 9 by SME 1.13 B / / G Eye Nuts ìsî Std. Tap Working Weight Dimensions (in.) Size No. Stock Size (in.) Size (in.) Load Limit (lbs.)* Per 100 (lbs.) C D E F J K N T W / / / / / / / / Lifting Eye Forged Steel - Quenched and Tempered. On request: threaded to customer specifications. S-405 Lifting Eyes Working Load Limit Threaded (lbs.)* Maximum Thread Diam. (in.) Weight Each (lbs.) S-405 Lifting Nut Dimensions (in.) Size No. C D E F H J K L N T W

88 Crosby rigging accessories Shoulder Nut Ring Bolt Forged Steel - Quenched and Tempered. Hot Dip galvanized. ll Bolts Hot Dip galvanized after threading.

89 88 Crosby rigging accessories Shoulder Nut Ring Bolt Forged Steel - Quenched and Tempered. Hot Dip galvanized. ll Bolts Hot Dip galvanized after threading. Diameter of ring stock is same as shank diameter. G-257 Shoulder Nut Ring Bolts * Ring Bolt Size (in.) Working Load Limit (lbs.)* Weight Per 100 (lbs.) G-257 Shoulder Nut Ring Bolts Dimensions (in.) B C D E F G H 3/8 x 4-1/ /2 X Pad Eyes Forged Steel - Quenched and Tempered. Forged from 1035 Carbon Steel. Excellent welding qualities. Widely used on farm machinery, trucks, steel hulled marine vessels and material handling equipment. Reference merican Welding Society specifications for proper welding procedures. S-264 Pad Eye S-264 Pad Eyes Weight Per 100 (lbs.) Dimensions (in.) B C D E G H L Size No. * * * * 1-1/

89 Crosby rigging accessories S-293 Forged Rivet Eye Bolts Forged steel - Quenched and Tempered. S-293 Rivet Eye Bolts S-293 Rivet Eye Bolts Shank Dia. & Length (in.) Weight Per 100 (lbs.

90 89 Crosby rigging accessories S-293 Forged Rivet Eye Bolts Forged steel - Quenched and Tempered. S-293 Rivet Eye Bolts S-293 Rivet Eye Bolts Shank Dia. & Length (in.) Weight Per 100 (lbs.) Dimensions (in.) S-293 Stock No. B C D E F G 1/4 x /4 x /16 x 2-1/ /16 x 4-1/ /8 x 2-1/ /8 x 4-1/ /8 x /2 x 3-1/ /2 x /8 x /8 x /4 x 4-1/ /4 x /8 x /8 x x x /4 x /4 x S-276 Shoulder Rivet Eye Bolts Forged steel - Quenched and Tempered. S-276 Shoulder Rivet Eye Bolt S-276 Shoulder Rivet Eye Bolts Shank Dia. & Length (in.) Weight Per 100 (lbs.) Dimensions (in.) S-276 Stock No. B C D E F G H 1/4 x /4 x /16 x 2-1/ /16 x 4-1/ /8 x 2-1/ /8 x 4-1/ /2 x 3-1/ /2 x /8 x /8 x /4 x 4-1/ /4 x /8 x x x /4 x /4 x /2 x

91 90 WIRE ROPE END FittingS Closed Swage Sockets Forged from special bar quality carbon steel, suitable for cold forming. Swage Socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope. Hardness controlled by spheroidize annealing. Stamp for identification after swaging without concern for fractures (as per directions in Wire Rope End Terminations User s Manual). Swage sockets incorporate a reduced machined area of the hank which is equivalent to the proper fter Swage dimension. Before swaging, this provides an obvious visual difference in the shank diameter. fter swaging, a uniform shank diameter is created allowing for a QUIC-CHECK and permanent visual inspection opportunity. Designed to quickly determine whether the socket has been through the swaging operation and assist in field inspections, it does not eliminate the need to perform standard production inspections which include gauging for the proper fter Swage dimensions or proof loading. S-502 Closed Swage Sockets S-502 Closed Swage Sockets S-502 Stock No. Grade pendants. Rope Size S-502 Closed Socket Specifications Before Swage Dimensions (in.) Wt. Each (lbs.) Ultimate Load** (t) Max. fter Swage Dim. (in.) Swager / Die Data Stock No Ton 5 x Ton 6 x Ton 6 x 12 Side Load (in.) (mm) B C D E F H L Die Description / /4 Socket / /16-3/8 Socket / /16-3/8 Socket / /16-1/2 Socket / /16-1/2 Socket / /16-5/8 Socket / /16-5/8 Socket / /4 Socket / /8 Socket Socket / /8 Socket / /4 Socket / /8 Socket / /2 Socket / /4 Socket Socket Ton 6 x 12

92 91 WIRE ROPE END FittingS Open Swage Sockets Forged from special bar quality carbon steel, suitable for cold forming. Swage Socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope. Hardness controlled by spheroidize annealing. Stamp for identification after swaging without concern for fractures (as per directions in Wire Rope End Terminations User s Manual). Swage sockets incorporate a reduced machined area of the hank which is equivalent to the proper fter Swage dimension. Before swaging, this provides an obvious visual difference in the shank diameter. fter swaging, a uniform shank diameter is created allowing for a QUIC- CHECK and permanent visual inspection opportunity. Designed to quickly determine whether the socket has been through the swaging operation and assist in field inspections, it does not eliminate the need to perform standard production inspections which include gauging for the proper fter Swage dimensions or proof loading. S-501 Open Swage Sockets S-501 Stock No. S-501B Stock No. Ü S-501 Open Swage Sockets S-501 and S-501B Open Socket Specifications Swager / Die Data Rope Size Stock No. Side Load Before Swage Dimensions Tolerance (in.) +/- Max. 500 fter (in.) (mm) Wt. Each (lbs.) Ultimate Load** (t) B C D E F H L M N H Swage Dim. (in.) Die Description 1500 Ton 5 x Ton 6 x Ton 6 x 12 1/ /4 Socket / /16-3/8 Socket / /16-3/8 Socket / /16-1/2 Socket / /16-1/2 Socket / /16-5/8 Socket / /16-5/8 Socket / /4 Socket / /8 Socket Socket / /8 Socket / /4 Socket / /8 Socket / /2 Socket / /4 Socket Socket Ton 6 x 12 Grade pendants.

93 92 WIRE ROPE END FittingS G-417 / S-417 Closed Spelter Sockets Forged Steel Sockets through 1-1/2, cast alloy steel 1-5/8 through 4. Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on the recommended use with 6 x 7, 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope. Strand constructed with minimal number of wires (e.g. 1 x 7) requires special consideration that socket basket length be five (5) times the strand diameter or fifty (50) times the wire diameter, whichever is the greater. G-417 / S-417 Closed Grooved Sockets meet the performance requirements of Federal Specification RR-S-550E, Type, except for those provisions required of the contractor. G-417 / S-417 Closed Spelter Sockets Rope Dia. Structural Ultimate Stock No. Weight Dimensions (in.) (in.) (mm) Strand Dia. (in.) Load (t) G-417 Galv. S-417 S.C. Each (lbs.) B C D* F G H J K L 1/4 6-7 ó /16-3/ ó /16-1/ ó /16-5/ / /4 18 9/16-5/ / /16-3/ /16-7/ / / /4-1-3/ /16-1-1/ / /16-1-1/ / /16-1-3/ /4-1-7/ /16-1-5/ / /16-1-3/ /4-2-3/ /16-1-7/ /2-2-5/ /16-2-1/ /4-2-7/ /16-2-7/ / /2-2-5/ /4-3-3/ /4-2-7/ /2-3-5/ / / ó * Diameter of pin must not exceed pin used on companion 416 socket. Reference adjacent page D dimension. Cast lloy Steel.

94 93 WIRE ROPE END FittingS G-416 / S-416 Open Spelter Sockets Forged Steel Sockets through 1-1/2, cast alloy steel 1-5/8 through 4. Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on the recommended use with 6 x 7, 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope. Strand constructed with minimal number of wires (e.g. 1 x 7) requires special consideration that socket basket length be five (5) times the strand diameter or fifty (50) times the wire diameter, whichever is the greater. G-416 / S-416 Open Grooved Sockets meet the performance requirements of Federal Specification RR-S-550E, Type, except for those provisions required of the contractor. G-416 / S-416 Open Spelter Sockets Rope Dia. Structural Ultimate Stock No. Weight Dimensions (in.) Tolerance +/- (in.) (mm) Strand Dia. (in.) Load (t) G-416 Galv. S-416 S.C. Each (lbs.) C D F G H J L M N C 1/4 6-7 ó /16-3/ ó /16-1/ ó /16-5/ / /4 18 9/16-5/ / /16-3/ /16-7/ / / /4-1-3/ /16-1-1/ / /16-1-1/ * 1-5/8 * /16-1-3/ * 1-3/4-1-7/8 * /16-1-5/ * 2-2-1/8 * /16-1-3/ * 2-1/4-2-3/8 * /16-1-7/ * 2-1/2-2-5/8 * /16-2-1/ * 2-3/4-2-7/8 * /16-2-7/ * 3-3-1/8 * /2-2-5/ * 3-1/4-3-3/8 * /4-2-7/ * 3-1/2-3-5/8 * / * 3-3/4-4 * ó * Cast lloy Steel. NOTE: VILBLE WITH BOLT NUT ND COTTER. CONTCT CROSBY FOR MORE INFORMTION.

95 94 WIRE ROPE END FittingS SB-427 Button Spelter Socket vailable in six sizes from 1/2 to 1-1/2, (13mm - 38mm). Button Spelter terminations have a 100% efficiency rating, based on the catalog strength of the wire rope. Designed for use with mobile cranes. Can be used ot terminate high performance, rotation resistant ropes, and standard 6 strand ropes. Easy to install assembly utilizes Crosby WIReloCK socketing compound. Sockets and buttons are re-usable. Replacement buttons and sockets are available. Locking feature available to prevent rotation of rope. Button contains cap iwth eye that can be attached to, and used to pull, rope during reeving process. Manufactured to the requirements of PI-2C. SB-427 Button Spelter Socket WI SB-427 Button Spelter Sockets Wire Rope Size SB-427 Stock Ultimate Load Weight Each Socket Only Button Only Stock Dimensions (in.) Tolerance +/- (in.) (mm) No. (t) (lbs.) Stock No. No. B C D E F J K L M C 1/2-5/ /8-3/ /4-7/ / /8-1-1/ /8-1-1/ SB-427TB (Bolt, Nut and Cotter Pin) Wire Rope Size SB-427TB Stock Ultimate Load Weight Each Socket Only Button Only Dimensions (in.) Tolerance +/- (in.) (mm) No. (t) (lbs.) Stock No. Stock No. B C D E F J K L M C 1/2-5/ /8-3/ /4-7/ / /8-1-1/ /8-1-1/ Wirelock Requirements Wire Rope WIRELOCK WIRELOCK Size Required WIRELOCK Kit Size (in.) (mm) (cc) Stock No. (cc) 1/2-5/ /8-3/ /4-7/ / * /8-1-1/ /8-1-1/

95 WIRE ROPE END FittingS US-423T Super Terminator The 423T wedge socket terminations have a minimum efficiency rating on most high performance, high strength, compacted strand, rotation resistant

96 95 WIRE ROPE END FittingS US-423T Super Terminator The 423T wedge socket terminations have a minimum efficiency rating on most high performance, high strength, compacted strand, rotation resistant wire ropes of 80% based on the catalog breaking strength of the various ropes.** Design eliminates the difficulty of properly seating the wedge with high performance wire rope into a wedge socket termination. Proper application of the Super TERMINTOR eliminates the first load requirement of conventional wedge socket terminations. Wedge and accessories provided with a zinc finish. Meets the performance requirements of EN :2003. Meets or exceeds all requirements of SME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these sockets meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by SME B US Patent 8,375,527 B1. Basket is cast steel and individually magnetic particle inspected. Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets. Secures the tail or dead end of the wire rope to the wedge, thus eliminates loss or punch out of the wedge. Eliminates the need for an extra piece of rope an dis easily installed. The TERMINTOR wedge eliminates the potential breaking off of the tail due to fatigue. The tail, which is secured by the base of the clip and the tensions device, is left underformed and available for reuse. vailable with Bolt, Nut, and Cotter Pin. S-422T Most sizes now incorporate the Crosby TermiNTor design and may vary in shape from product shown. S-423T WEDGE SOCKETS ssembly includes Socket, Wedge, Pin, Wire Rope Clip, Tensioner, Bolts and Secondary Retention Wire. Wire Rope Dia. S-423T ssembly with Round Pin and Cotter Pin S-423TB ssembly with Bolt, Nut and Cotter Pin S-423TW** Wedge Kit S-423T PI 2C S-423T S-423T Weight Each S-423TB PI 2C S-423TB S-423TB Weight Each S-423TW S423TW Weight Each (in.) (mm) Stock No. Stock No. (lbs.) (kg) Stock No. Stock No. (lbs.) (kg) Stock No. (lbs.) (kg) 5/ / / / / **Kit contains Wedge, Wire Rope Clip and Bolts, Tensioner Bolt and Secondary Retention Wire. Wire Rope Dia. S-423T Stock Dimensions (in.) (in.) (mm) No. B C D E F G H J* L P R S T U V 5/ / / / / * Nominal socket body. IMPORTNT: with TERMINTOR.

96 WIRE ROPE END FittingS S-423T Super Terminator The Crosby Super terminator offers several advantages over traditional methods of wedge socket terminations: S-423T Super Terminator The Crosby

97 96 WIRE ROPE END FittingS S-423T Super Terminator The Crosby Super terminator offers several advantages over traditional methods of wedge socket terminations: S-423T Super Terminator The Crosby S-423T Super TERMINTOR is the first wedge socket designed to take advantage of the performance properties associated with high performance, high strength, compacted strand, rotation resistant wire rope. The innovative design will significantly increase the termination efficiency over existing wedge sockets available today. Terminations on most ropes have a minimum efficiency rating of 80% of the rope s catalog breaking strength. Design eliminates the difficulty of properly seating the wedge with high performance, high strength, compacted strand, rotation resistant wire rope into a wedge socket termination. Proper application of the Super TERMINTOR eliminates the first load requirement of conventional wedge socket terminations. US Patent 8,375,527 B1. dditional Features: Wire rope sizes available: 5/8-1 1/4, 14 mm- 32 mm vailable as a complete assembly, or as a wedge kit that can be retrofitted onto existing Crosby S-421T TERMINTOR wedge sockets. Wedge accessories provided with a zinc finish. Meets or exceeds all SME B30.26 requirements including: identification, ductility, design factor, proof load, and temperature requirements. Importantly, they meet other critical performance criteria not addressed by SME B30.26 including: fatigue life, impact properties and material traceability. vailable with bolt, nut and cotter (S-423TB) The Super terminator by Crosby. The first wedge socket termination designed specifically for high performance wire rope.

Black - mid size sire line for socket. - 7/16 on US4-9/16 on US5 Orange - smallest wire line size for socket.

98 97 WIRE ROPE END FittingS US-422T Utility Wedge Sockets Basket is cast steel and individually magnetic particle inspected. Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope. Wedges are colour coded for easy identification. Blue - largest wire line size for socket. Black - mid size sire line for socket. - 7/16 on US4-9/16 on US5 Orange - smallest wire line size for socket. Cast into each socket is the name McKissick, Crosby or CG, its model number and its wire line range. Load pin is forged and headed on one end. Incorporates Crosby s patented QUIC-CHECK Go and No-Go feature cast into the wedge. The proper size rope is determined when the following criteria are met: 1) The wire rope should pass thru the Go hole in the wedge. 2) The wire rope should NOT pass thru the No- Go hole in the wedge. US-422T wedge sockets contain a hammer pad (lip) to assist in proper securement of termination. Meets or exceeds all requirements of SME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly these sockets meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by SME B UWO-422T Wedges are to be used only with the US-422T Wedge Socket ssemblies. S-422T Most sizes now incorporate the Crosby TermiNTor design and may vary in shape from product shown. US-422T Utility Wedge Sockets Wire Rope Dimensions Size PI 2C (in.) US-422T US-422T Weight Wedge Weight C Model Stock Stock Each Only Each +/- No. (in.) (mm) No. No. (lbs.) Stock No. (lbs.) B.09 D G H J K L P R S T U V US4T 3/ US4T 7/ US4T 1/ US5T 1/ US5T 9/ US5T 5/ US6T 5/ US6T 3/ US8T 5/ US8T 3/ US7* 7/ US7* US8T 7/ US8T US10T 1-1/ US10T 1-1/ US11T 1-1/ US11T 1-1/ * Non-TERMINTOR Style. RE ROPE END FITTINGS

98 WIRE ROPE END FittingS S-421T Wedge Sockets Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope. Meets or exceeds all requirements of SME B30.

Importantly, these sockets meet other critical performance requirements including fatigue life, impact properties and materials traceability, not addressed by SME B30.26.

99 98 WIRE ROPE END FittingS S-421T Wedge Sockets Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope. Meets or exceeds all requirements of SME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these sockets meet other critical performance requirements including fatigue life, impact properties and materials traceability, not addressed by SME B Type pproval and certification in accordance with BS 2007 Steel Vessel Rules , and BS Guide for Certification of Cranes. Basket is cast steel and individually magnetic particle inspected. Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets. Secures the tail or dead end of the wire rope to the wedge, thus eliminates loss or Punch out of the wedge. Eliminates the need for an extra piece of rope, and is easily installed. The TERMINTOR TM wedge eliminates the potential breaking off of the tail due to fatigue. The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse. Incorporates Crosby s patented QUIC-CHECK Go and No-Go feature cast into the wedge. The proper size rope is determined when the following criteria are met: 1) Utilizes standard Crosby Red-U-Bolt wire rope clip. 2) The wire rope should NOT pass thru the No-Go hole in the wedge. Utilizes standard Crosby Red-U-Bolt wire rope clip. The 3/8 through 1-1/8 standard S-421 wedge socket can be retrofitted with the new style TERMINTOR wedge. vailable with Bolt, Nut, and Cotter Pin. U.S. patent 5,553,360 Canada patent 2,217,004 and foreign equivalents. Meets the performance requirements of EN : S-421T Wedge sockets meet the performance requirements of federal specification RR -S-550E, Type C, except those provisions required of the contractor. S-421T WEDGE SOCKETS Wire Rope Dia. S-421T Stock No. PI 2C S-421T Stock No. (ssembly includes Socket, Wedge, Pin and Wire Rope Clip) Wedge Optional G-4082 PI 2C Only PI 2C Bolt, Nut & Cotter S-421TW Weight S-421TW Weight Stock No. Each Stock No. G-4082 Each Wedge Only (lbs.) Wedge Only Stock No. (lbs.) Weight Each (lbs.) PI 2C S-421TW Stock No. Wedge Only Optional G-4082 Bolt, Nut & Cotter G-4082 Weight Stock Each No. (lbs.) (in.) (mm) 3/ / / / / / / Wire Rope Dimensions Dia. PI 2C (in.) S-421T C (in.) (mm) S-421T Stock +/- Stock No. No. B.09 D G H J* K* L P R S T U V 3/ / / / / / / * Nominal NOTE: For intermediate wire rope si ze s, use next larger size so cke t. The S-423T Super TERMINTOR wedge is desi gned to be ase mbled only into the Crosb y S-421T TERMINTOR so cke t body. IMPORTNT:

99 Snatch Blocks Rigging Blocks Forged lloy Heat Treated Hooks lloy treated

ll Blocks open for easy wire installation Snatch Block (Single) Wire size

lbs WLL 4:1 5/16-3/8 3 5 5 2 ton 3/8-1/2 4 1/2 4 12 4 ton 5/8-3/4 6 2 27 8

37 8 ton Snatch Block (Double) Wire size lbs WLL 4:1 3/8-1/2 4 1/2 2 20 4

size lbs WLL 4:1 3/8-1/2 4 1/2 2 20 4 ton 5/8-3/4 6 2 49 12 ton 5/8-3/4 8

100 99 Snatch Blocks Rigging Blocks Forged lloy Heat Treated Hooks lloy treated hooks and shackles Locking feature available to prevent rotation of rope. ll Blocks open for easy wire installation Snatch Block (Single) Wire size Sheave Qty/box Wt. lbs WLL 4:1 5/16-3/ ton 3/8-1/2 4 1/ ton 5/8-3/ ton 5/8-3/ ton Snatch Block (Single) Wire size Sheave Qty/box Wt. lbs WLL 4:1 5/16-3/ ton 3/8-1/2 4 1/ ton 5/8-3/ ton 5/8-3/ ton Snatch Block (Double) Wire size Sheave Qty/box Wt. lbs WLL 4:1 3/8-1/2 4 1/ ton 5/8-3/ ton 5/8-3/ ton Snatch Block (Double) Wire size Sheave Qty/box Wt. lbs WLL 4:1 3/8-1/2 4 1/ ton 5/8-3/ ton 5/8-3/ ton

101 100 Eye Bolt - Regular Eye Bolt - Regular Forged carbon steel quenched & tempered Hot dip galvanized With heavy hex nuts - Embossed with OCEN, and size to meet SME B30.26 Dia. & Length WLL lbs Wt./ 100 Dimensions in C B D E 3/8 x 2 1/ /8 x 4 1/ /8 x /2 x 3 1/ /2 x /2 x /2 x /8 x /8 x /8 x /8 x /8 x /4 x 4 1/ /4 x /4 x /4 x /4 x x

101 Eye Bolt - Shoulder Machine Eye Bolt - Shoulder Machine WLL (lbs) Shank (in) Eye (in) Dia. Length I.D. O.D. Wt./100 Pcs. 650 1/4 1 0.75 1.13 4.9 1200 5/16 1-1/8 0.88 1.38 8.5 1550 3/8 1-1/4 1.

102 101 Eye Bolt - Shoulder Machine Eye Bolt - Shoulder Machine WLL (lbs) Shank (in) Eye (in) Dia. Length I.D. O.D. Wt./100 Pcs / /16 1-1/ /8 1-1/ /2 1-1/ /8 1-3/ / /8 2-1/ / / /2 3-1/

102 Eye bolt - Shoulder Eye Bolt - Shoulder Forged carbon steel quenched & tempered Hot dip galvanized With heavy hex nuts - Embossed with OCEN, and size to meet SME B30.26 Size WLL Wt.

103 102 Eye bolt - Shoulder Eye Bolt - Shoulder Forged carbon steel quenched & tempered Hot dip galvanized With heavy hex nuts - Embossed with OCEN, and size to meet SME B30.26 Size WLL Wt. Dimensions (in) (in) lbs 100 B C D E F G H J 1/4 x /4 x /16 x 2 1/ /16 x 4 1/ /8 x 2 1/ /8 x 4 1/ /2 x 3 1/ /2 x /8 x /8 x /4 x 4 1/ /4 x /8 x x x /4 x /4 x /2 x

103 Sleeves luminum Duplex Sleeves - Generally used with galvanized wire Cable Size Wt./100lbs Length Depth Width O.D fter Swage 1/16 0.10 3/8 11/64 1/4 0.187 3/32 0.30 1/2 9/32 13/32 0.281 1/8 0.

104 103 Sleeves luminum Duplex Sleeves - Generally used with galvanized wire Cable Size Wt./100lbs Length Depth Width O.D fter Swage 1/ /8 11/64 1/ / /2 9/32 13/ / /8 11/32 1/ / /16 3/8 9/ / /16 2 1/ / /8 17/32 13/ / /4 11/16 1-1/ / /16 3/4 1-5/ / /16 15/16 1-7/ / /16 1-5/ luminum Wire Rope Stops- Generally used with galvanized wire Cable Size Wt./100lbs Length Depth Width O.D fter Swage 1/ /4 3/ / /32 1/ / /32 5/ / /16 3/ / /16 7/ / /16 9/ / /16 3/ Copper Oval Sleeves - Generally used with stainless steel wire Cable Size Wt./100lbs Length Depth Width O.D fter Swage 1/ /64 11/64 1/ / /64 15/64 3/ / /16 21/64 1/ / /8 3/8 19/ / /8 7/16 43/ / /8 13/16 1/ / /8 2 1/32 1-1/ / /2 23/32 1-1/ Copper Wire Rope Stops - Generally used with stainless steel wire Cable Size Wt./100lbs Length Depth Width O.D fter Swage 1/ /64 5/ / /64 7/ / /64 5/ / /64 3/ / /64 7/ /4 6 21/32 9/ / /32 5/

Grade 80 & 100 Alloy Chain

Grade 80 & 100 Alloy Chain General Information WORKING LOAD LIMIT The Working Load Limit is the maximum load in pounds which should ever be applied to chain, when the chain is new or in as-new condition,