nterconnect compatibility new SEALED CONNECTORS harsh environment dual seals for harsh environments ergonomic locking tab for easier mating

Transcription

1 new harsh environment SEALED CONNECTORS nterconnect dual seals for harsh environments ergonomic locking tab for easier mating compatibility AT Series plug wedges ensure a proper seal placement and contact alignment temperature rating: -55 C to 125 C (-67 F to 257 F) dielectric materials have a flammability rating of UL94 HB AT Series receptacle pin contacts 60 contact area

2 superior performance. AT Series connectors are designed with dual seals and ergonomic locking clip, and can work directly with or replace existing industry products. material specifications general specifications plug/receptacle thermoplastic shell thermoplastic wedge silicone rubber grommet contacts copper alloy pin copper alloy socket nickel-plated finish (optional gold) sealing plugs: all sizes of thermoplastic dielectric withstanding voltage: current leak less than 2 milliamps at 1500 VAC insulation resistance: 1000 megaohms minimum 25 C current ratings: size 16: 1 amps (contact current rating at 125 C continuous) submersion: wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage fluid resistance: connectors show no damage when exposed to most fluids used in industrial application vibration: no unlocking or unmating. Exhibits no mechanical or physical damage after sinusoidal vibration levels of 20G s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. temperature: operative at temperatures from -55 C to +125 C. Continuous at rated current. contact retention: contacts withstand a minimum load of 25 lbs (89N) for size 16 thermal cycle: no cracking chipping or leaking after 20 test cycles from -55 C to +125 C durability: no electrical or mechanical defects after 100 cycles of engagement and disengagement AT Series Deutsch DT Series

3 new Create a UV/weather-resistant, multi-pin connection with our new line of AT Series connectors. Connector housings feature a silicone elastomer wire seal and are available in 2- to 12-pin configurations. When connected together, an integral latching system ensures a definitive electrical and mechanical connection that meets SAE J200, IP67 and IP69K testing specifications. AT Series receptacle housings are made from a thermoplastic material that offers durability and UV resistance for the receptacle assembly. Each receptacle includes a silicone elastomer wire seal to help prevent environmental ingress. To complete a receptacle assembly, one AT Series receptacle housing, receptacle wedge and receptacle pins are required. All AT Series receptacle assemblies mate directly with Deutsch DT Series plug housings/assemblies. The thermoplastic material is rated to -55 C to 125 C (-67 F to 257 F) and meets UL94 HB rating way receptacle housing, AT04-2P $0.56 ea $0.51 ea $0.4 ea $0.8 ea way receptacle housing, AT04-P $0.99 ea $0.66 ea $0.56 ea $0.49 ea way receptacle housing, AT04-4P $1.28 ea $0.88 ea $0.75 ea $0.66 ea way receptacle housing, AT04-6P $2.2 ea $1.4 ea $1.14 ea $1.01 ea way receptacle housing, AT04-8P $2.41 ea $1.81 ea $1.54 ea $1.6 ea way receptacle housing, AT04-12P $.49 ea $2.49 ea $2.12 ea $1.87 ea AT Series receptacle wedges are made from thermoplastic material and are a necessary component in aligning your receptacle pins into proper position within the receptacle housing assembly. One wedge is required per receptacle to complete the assembly. AT Series receptacle wedges DO NOT interchange with Deutsch DT Series receptacles wedges way receptacle wedge, AW2P $0.09 ea $0.08 ea $0.07 ea $0.06 ea way receptacle wedge, AWP $0.09 ea $0.08 ea $0.07 ea $0.06 ea way receptacle wedge, AW4P $0.14 ea $0.1 ea $0.11 ea $0.10 ea way receptacle wedge, AW6P $0.18 ea $0.16 ea $0.14 ea $0.12 ea way receptacle wedge, AW8P $0.29 ea $0.21 ea $0.18 ea $0.15 ea way receptacle wedge, AW12P $0.29 ea $0.21 ea $0.18 ea $0.15 ea AT Series receptacle pin contacts complete the electrical connection for a receptacle housing assembly. Three different quality grades of contacts are available. All feature a copper alloy base with either a standard stamped/formed nickel-plate, military solid crimp nickel- or gold-plate. Seal plugs are made of a silicone elastomer and can be used to plug any open or unused receptacle pin position. AT Series pins and seals are interchangeable with Deutsch DT Series receptacle pins and mate directly to Deutsch DT Series plug contacts stamped/formed pin, nickel-plated, gauge, AT $0.2 ea $0.18 ea $0.15 ea $0.1 ea stamped/formed pin, nickel-plated, gauge, AT $0.2 ea $0.18 ea $0.15 ea $0.1 ea solid crimp pin, nickel-plated, gauge, AT $0.4 ea $0.28 ea $0.24 ea $0.21 ea solid crimp pin, gold-plated, gauge, AT $0.72 ea $0.4 ea $0.7 ea $0.4 ea sealing plug, silicone elastomer A $0.40 ea $0.1 ea $0.28 ea $0.20 ea

4 AT Series plug housings are made from a thermoplastic material that offers durability and UV resistance for the plug assembly. Each plug includes one silicone elastomer wire seal and front housing seal to help prevent environmental ingress. To complete a plug assembly, one AT Series plug housing, plug wedge and plug contacts are required. All AT Series plug assemblies mate directly with Deutsch DT Series receptacle housings/assemblies. The thermoplastic material is rated to -55 C to 125 C (-67 F to 257 F) and meets UL94 HB rating way plug housing, AT06-2S $0.80 ea $0.50 ea $0.44 ea $0.9 ea way plug housing, AT06-S $1.05 ea $0.74 ea $0.6 ea $0.55 ea way plug housing, AT06-4S $1.75 ea $0.96 ea $0.82 ea $0.72 ea way plug housing, AT06-6S $2.46 ea $1.40 ea $1.19 ea $1.05 ea way plug housing, AT06-8S $2.76 ea $2.47 ea $2.10 ea $1.85 ea way plug housing, AT06-12S $.1 ea $2.96 ea $2.52 ea $2.22 ea AT Series plug wedges are made from thermoplastic material and are a necessary component in aligning your plug contacts into the proper position within the plug housing assembly. One wedge is required per plug housing to complete an assembly. AT Series plug wedges DO NOT interchange with Deutsch DT Series plug wedges way plug wedge, AW2S $0.12 ea $0.10 ea $0.08 ea $0.07 ea way plug wedge, AWS $0.12 ea $0.10 ea $0.08 ea $0.07 ea way plug wedge, AW4S $0.18 ea $0.16 ea $0.1 ea $0.12 ea way plug wedge, AW6S $0.20 ea $0.19 ea $0.16 ea $0.14 ea way plug wedge, AW8S $0.29 ea $0.22 ea $0.18 ea $0.16 ea way plug wedge, AW12S $0.29 ea $0.22 ea $0.18 ea $0.16 ea AT Series plug socket contacts complete the electrical connection for a plug housing assembly. Three different quality grades of contacts are available. All feature a copper alloy base with either a standard stamped/formed nickel-plate, military solid crimp nickel- or gold-plate. Seal plugs are made of a silicone elastomer and can be used to plug any open or unused plug contact position. AT Series socket contacts and seals are interchangeable with Deutsch DT Series plug contacts and mate directly to Deutsch DT Series receptacle pins stamped/formed socket, nickel-plated, gauge, AT $0.4 ea $0.29 ea $0.26 ea $0.24 ea stamped/formed socket, nickel plated, gauge, AT $0.4 ea $0.29 ea $0.26 ea $0.24 ea solid crimp socket, nickel-plated, gauge, AT $0.4 ea $0.5 ea $0.0 ea $0.27 ea solid crimp socket, gold-plated, gauge, AT $0.87 ea $0.5 ea $0.46 ea $0.41 ea sealing plug, silicone elastomer A $0.40 ea $0.1 ea $0.28 ea $0.20 ea

5 superior design. AT Series connectors and terminals are designed for high performance applications in the heavy-equipment, automotive, agricultural, alternative energy and any other field that demands the ultimate in performance. sealing plugs (optional) contacts are derived from quality copper alloy material. Available in standard stamped/formed nickel-plated and military style solid crimp nickelor gold-plated. Terminals are interchangeable with competitive Deutsch DT Series connectors. rear seal ensures a tight environmental seal at point of wire entry. ergonomically designed clip The increased size and tactile design of our clips allow for easier mating and unmating. recessed sealing area The recessed cavity allows for a secure fitting front seal. front seal The superior design ensures a tight environmental seal when used in conjunction with the recessed cavity of the connector body. wedge with Added Seal Retention The added seal retention feature ensures that the Front Seal does not move out of place.