Pronto M50 Pronto M51 with SureStep (Before 1/20/05)

Transcription

1 Parts Catalog Issued: Aug 30, 2018 Pronto M50 Pronto M51 with SureStep (Before 1/20/05) MWD Power Wheelchairs

2 Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If you have any questions regarding this catalog, please contact one of our Customer Service Representatives. SYMBOL DEFINITION For Customer Service Support Call: For Faxed In Orders Call: or For Technical Service Call: Literature Can Be Found at: or Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the bottom of the page or below specified charts. Examples: A,B,C etc. NOTE: NLA = Special Comments = General information pertaining to that specific page = No Longer Available HARDWARE MEASUREMENTS The measurements for the hardware will be listed as follows: Screws, Bolts Diameter X Thread Count/Pitch X Length Washers Inside Diameter X Outside Diameter X Thickness Spacers Inside Diameter X Outside Diameter X Length For your convenience, we have supplied an area for you to list your Invacare Representatives. Name Phone Numbers 2018 Invacare Corporation. Elyria, Ohio. Invacare, Yes, you can., the Medallion Design, Pronto, and SureStep are registered trademarks and MKIV, MK5, NX, SPJ, M50, and M51 are trademarks of Invacare Corporation. 1

3 TABLE of CONTENTS Description Page Number Accessories - Miscellaneous Accessories - Oxygen Holder - Fold Down Medium Back Van Seat Accessories - Oxygen Holder - Semi-Recline Van Seat (After /1/03) Accessories - Oxygen Holder - Semi-Recline Van Seat (Before /15/03)... 9 Accessories - Power Wheelchair Tool Kit Accessories - Walker Holder Arms - Van Seat & Hardware (16" - 20" W) (After 8/31/02) Arms - Van Seat & Hardware (18" W) (Before 9/1/02)... 2 Arms - Van Seat & Hardware (20" W) (Before 9/1/02) Base Frame & Van Seat Post (After 7/13/03)... 9 Base Frame & Van Seat Post (Before 71/03)... 8 Battery Covers & Harnesses (Before 10/8/03)... 0 Battery Harnesses (After 10/7/03)... 2 Caster & Forks Electronics - MK5 NX Controllers - Programmer & Battery Chargers (After 6/26/03) Electronics - MK5 SPJ (After 6/26/03) & SPJ+ (Introduced 8/16/05) Joystick & Mounting Hardware 80 Electronics - MKIV Controllers - Programmer & Battery Chargers (Before 6/27/03) Electronics - MKIV RII Joystick & Mounting Hardware (Before 6/27/03) Electronics - Quad Link (Before /07/06) Electronics - Quad Link (QL) (After /06/06) Frame Finish & Shroud Colors

4 TABLE of CONTENTS Description Page Number Frames - Seat Van & Mounting Hardware (9/1/02-7/13/03) Frames - Seat Van & Mounting Hardware (After 7/13/03) Frames - Seat Van & Mounting Hardware (Before 9/1/02) Front Riggings - Footboard - 90FB... Front Riggings - Footrest & Hardware - PW93 (Before 9/1/02)... 9 Front Riggings - Footrest & Hardware - PW93ST (Before 9//02) Front Riggings - Footrest (Hemi) & Hardware - PHW93 (9/1/02-1/5/03) Front Riggings - Footrest (Hemi) & Hardware - PHW93 (After 1/5/03)... 5 Front Riggings - Front (Hemi) Riggings Attachment Kit (After 8/31/02)... 7 Front Riggings - Front Riggings Attachment Kit (FRKTM5) (Before 9/1/02)... 6 Front Riggings - Legrest Supports - Articulating - Hemi - PHALA (9/1/02-1/5/03) Front Riggings - Legrest Supports - Articulating - Hemi - PHALA (After 1/5/03) Front Riggings - Legrest Supports - Articulating - PALA (Before 9/1/02) Front Riggings - Legrest Supports - Hemi - PH90A (9/1/02-1/5/03) Front Riggings - Legrest Supports - Hemi - PH90A (After 1/5/03) Front Riggings - Legrest Supports - P90A (Before 9/1/02) Front Riggings - Pivot/Slide Tube & Footplate - Legrests Motors - Gearbox & Drive Wheel Packaging - Literature & Decals... 6 Seats - Van Seats - Van - Upgrade Kits

5 TABLE of CONTENTS Description Page Number Shrouds - Battery Cover & Attaching Hardware (After 7/13/03) Shrouds & Attaching Hardware (Before 7/1/03) SureStep Walking Beams & Hardware Warranty Replacement Parts

6 Frame Finish and Shroud Colors Frame Finish Color Number Part Number Bottle Size Color 3P NLA.6 oz Flat Black Shroud Colors Color Number DBLM CRDM Color Deep Blue Candy Red 5

7 Packaging, Literature and Decals 6

8 Packaging, Literature and Decals Item Number Note Part Number Description Quantity Per Package Carton, Tray Top Carton, Corner Reinforcement NLA NLA - Carton, Cover Bag, Poly (72" L x 35" W x 19" D) X161 Insert, Plain Pad NLA NLA - Carton, Pad B NLA NLA - Carton, Tray NLA NLA - Carton, Insert 1 2 A,C NLA NLA - Owner's Manual 1 1 A NLA NLA - Instruction Manual, MKIV RII LP 1 1 A,C NLA NLA - Instruction Manual, MK5 NX/NX-LP 1 1 A NLA NLA - Decal, Shroud - M A Decal, Shroud - M A Decal, Drive/Push 1 2 A Decal, Transportation 1 1 A NLA NLA - Plate, Name, Patent Numbers 1 1 A NLA NLA - Decal, Front Battery Cover 1 1 A NLA NLA - Decal, Rear Battery Cover 1 1 NOTE: A - Not Shown B - No longer available, use as its replacement. C - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. NOTE: When adjusting or replacing parts, please refer to your owner's manual for assistance. 7

9 Base Frame and Van Seat Post Before 7/1/03 Item Number Note Part Number Description Quantity Per Package X006 Bearing (5/8") Plug Button, Head Tube, Black NLA NLA - Post, Adjustable Seat X000 Locknut (3/8-2) A NLA NLA - Base Frame NLA NLA - Screw, Socket Head (3/8-2 x 2-1/") NLA NLA - Decal, Warning, Battery Cable B NLA NLA - Base Frame and Adjustable Seat Post 1 1 NOTE: A - Includes items 1 and 7 B - Includes items 2-7 8

10 Base Frame and Van Seat Post After 7/13/03 9

11 Base Frame and Van Seat Post After 7/13/03 Item Number Note Part Number Description Quantity Per Package NLA NLA - Post, Seat Pivot NLA NLA - Frame with Headtube Bearings, Black Screw, Socket Head w/ Patch (3/8-16 x 2") X006 Bearing (5/8") Plug Button, Head Tube, Black A NLA NLA - Frame with Seat Post and Hardware, Black 1 1 B NLA NLA - Plate, Name, Patent Numbers 1 1 NOTE: A - Includes items 1-5 B - Not Shown 10

12 SureStep Walking Beams and Hardware 11

13 SureStep Walking Beams and Hardware Item Number Note Part Number Description Quantity Per Package 1 A NLA NLA - Walking Beam, SureStep - Right A NLA NLA - Walking Beam, SureStep - Left X015-NLA NLA - Washer, Nylon (9/16 x 1 x 5/8") NLA NLA - Washer (1/2 x 29/32 x 1/32") Bushing (1/2 x 5/8") A Tube, Pivot, Black Locknut (1/2-20) NLA NLA - Plate Reinforcement NLA NLA - Screw, Hex Head w/ Patch (5/16-18 x 1") B NLA NLA - Kit, SureStep Walking Beam Hardware Bolt, Round Head Square Neck (5/16-18 x 1") Locknut (5/16-18) Spring, Extension (1-1/ x 3-1/2" L) 1 2 NOTE: A - Includes item B - Includes items 2, 3,

14 Van Seat Frame and Mounting Hardware Before 9/1/02 Note: Seat post can be found on the base frame assembly page. 13

15 Van Seat Frame and Mounting Hardware Before 9/1/02 Note: Seat post can be found on the base frame assembly page. Item Number Note Part Number Description Quantity Per Package 1 B NLA NLA - Frame, Van Seat, Black C NLA NLA - Frame, Van Seat, Black B NLA NLA - Knob, Black (3/8-16 x 9-1/") C NLA NLA - Knob, Black (3/8-16 x 10-1/") NLA NLA - Screw, Hex Head w/ Patch (1/-20 x 1-1/") Washer (1/ x 23/32 x 1/16") Plug Button, Black (1") NLA NLA - Knob, Adjustment, Black (5/16-18 x 1-1/2") NLA NLA - Plug Button, Square, Black (1-1/") A,B NLA NLA - Hardware, Van Seat Mounting w/ Plug 1 1 Buttons 8 B,D NLA NLA - Hardware, Van Seat Mounting w/ Plug 1 1 Buttons 8 A,C NLA NLA - Hardware, Van Seat Mounting w/ Plug 1 1 Buttons 8 C,D NLA NLA - Hardware, Van Seat Mounting w/ Plug Buttons 1 1 NOTE: A - Includes Items 2-7 B - 18" Wide Seat C - 20" Wide Seat D - Includes Items 2-, 6, 7 1

16 Van Seat Frame and Mounting Hardware 9/1/02-7/13/03 Note: Seat post can be found on the base frame assembly page. 15

17 Van Seat Frame and Mounting Hardware 9/1/02-7/13/03 Note: Seat post can be found on the base frame assembly page. Item Number Note Part Number Description Quantity Per Package 1 C NLA NLA - Frame, Van Seat, Black D Frame, Van Seat, Black Washer (1/ x 23/32 x 1/16") NLA NLA - Screw, Hex Head (1/-20 x 1") NLA NLA - Knob, Adjustment, Black (5/16-18 x 1-1/2") C NLA NLA - Knob, Black (3/8-16 x 9-1/") D NLA NLA - Knob, Black (3/8-16 x 10-1/") NLA NLA - Screw, Hex Head w/ Patch (1/-20 x 1-1/") Spacer (1/ x 5/8 x 1/") Spacer, Coved (1/ x 11/16 x 1/2") NLA NLA - Screw, Hex Head w/patch (1/-20 x 2-1/2") Plug Button, Black (1") A,C Hardware, Van Seat Mounting w/ Plug Buttons B,C NLA NLA - Hardware, Van Seat Mounting w/ Plug 1 1 Buttons 11 A,D NLA NLA - Hardware, Wide Van Seat Mounting w/ Plug 1 1 Buttons 11 B,D Hardware, Wide Van Seat Mounting w/o Plug 1 1 Buttons NLA NLA - Bracket, Center Post, Black 1 1 NOTE: A - Includes items 2-10 B - Includes items 2-9 C - 18" Wide Seat D - 20" Wide Seat 16

18 Van Seat Frame and Mounting Hardware After 7/13/03 If converting a wheelchair from a Semi-Recline Van Seat w/ Cushion to a Semi-Recline Van Seat w/ Solid Seat Base, a new Seat Mounting Bracket item #13 part number is required also. 17

19 Van Seat Frame and Mounting Hardware After 7/13/03 If converting a wheelchair from a Semi-Recline Van Seat w/ Cushion to a Semi-Recline Van Seat w/ Solid Seat Base, a new Seat Mounting Bracket item #13 part number is required also. Item Number Note Part Number Description Quantity Per Package 12 A,B Kit, Van Seat Mounting Hardware NLA - Knob, Adjustment, Black (5/16-18 x 1-1/2") NLA - Screw, Hex Head w/ Patch (1/-20 x 1") 1 3 Washer (1/ x 23/32 x 1/16") 1 6 NLA - Screw, Hex Head w/ Patch (1/-20 x 1-1/") Spacer (1/ x 5/8 x 1/") Spacer, Coved (1/ x 11/16 x 1/2") 1 7 NLA - Screw, Hex Head w/patch (1/-20 x 2-1/2") Plug Button, Black (1") Locknut (5/16-18) 1 10 Washer, Steel (5/16 x 1-1/ x 1/16") 1 11 Screw, Hex Head w/ Patch (5/16-18 x 1") 1 13 C Bracket, Seat Mounting, Black D Bracket, Seat Mounting, Black Pivot, Seat Frame, Van Seat, Black (16" W) Frame, Van Seat, Black (18" W) Frame, Van Seat, Black (20" W) 1 1 NOTE: A - Item 8, Plug Buttons, are only used in the absence of front riggings. B - Includes items 1-11 C - Van Seats without Solid Seat Base D - Van Seats with Solid Seat Base 18

20 Van Seat 19

21 Item Number Note Part Number Description Van Seat Quantity Per Package NLA NLA - Extension, Backrest, Van Seat, Grey Fabric Extension, Backrest, Captain Seat, Grey Vinyl NLA NLA - Extension, Backrest, Van Seat, Tan Vinyl See Chart Fold Down Van Seat (18" Wide) See Chart Van Seat (Semi-Recline) 1 1 See Chart Van Seat (Semi-Recline) w/ Solid Seat Base A,B NLA NLA - Base, Solid, Captain Seat, Grey Vinyl (16" W) A NLA NLA - Base, Solid, Van Seat, Grey Vinyl (18" W) A Base, Solid, Captain Seat, Grey Vinyl (18" W) A NLA NLA - Base, Solid, Van Seat, Grey Vinyl (20" W) A Base, Solid, Captain Seat, Grey Vinyl (20" W) 1 1 NOTE: A - Solid Seat Base is the only item available for service parts with regard to the Van Seats. Seat Hinges are not included. B - 16" Solid Base is no longer available. A complete van seat should be ordered as replacement. See chart titled, "Van Seat (Semi-Recline) w/ Solid Seat Base." #2 Fold Down Van Seat (18" Wide) (Backrest Not Offered) All Grey Fabric Upholstery All Grey Vinyl Upholstery All Tan Vinyl Upholstery N/A N/A Note: Fold down, medium back van seat has four stop angle adjustment settings that include 95, 100, 105, 110 degrees and adjustable seat depths of 16, 17, and 18". #3 Van Seat (Semi-Recline) Upholstery Type All Grey Fabric All Grey Vinyl Van Seat with Backrest 16" Wide NLA Van Seat with Backrest 18" Wide NLA Van Seat with Backrest 20" Wide NLA Hinge Bracket w/ Lever Semi-Recline Right Hinge Bracket w/o Lever Semi-Recline Left Screw, Phillips Truss Head (1/-20 x 3/") See Note(s) A See Note(s) A See Note(s) B See Note(s) A See Note(s) A See Note(s) B All Tan Vinyl NLA NLA NLA See Note(s) A See Note(s) A See Note(s) B NOTE: A - Not Shown. Hinge Brackets used for ALL Semi-Recline Seat models only. For attaching Hinge Bracket, see part number B - Not shown, Screw for Hinge Bracket(s) and Total of (7) required for each Bracket. NOTE: Semi-recline Van Seat reclines approximately degrees. Adjustable depths are (16, 17, 18" deep for 16 & 18" wide seats) and (18, 19, 20" deep for 20" wide seats). Recline release levers are standard on the right side. Left side release levers can be ordered as a special with a new van seat. 20

22 Van Seat # Van Seat (Semi-Recline) w/ Solid Seat Base Upholstery Type Van Seat w/ Solid Seat and Backrest 16" Wide Van Seat w/ Solid Seat and Backrest 18" Wide Van Seat w/ Solid Seat and Backrest 20" Wide All Grey Fabric N/A N/A N/A All Grey Vinyl See Note(s) A See Note(s) A See Note(s) A All Tan Vinyl N/A N/A N/A NOTE: A - If converting a wheelchair from a Semi-Recline Van Seat w/ Cushion to a Semi-Recline Van Seat w/ Solid Seat Base, a new Seat Mounting Bracket part number is required also. See page titled "Frames - Seat Van & Mounting Hardware (After 7/13/03)". NOTE: Semi-recline Van Seat reclines approximately degrees. Adjustable depths are (16, 17, 18" deep for 16 & 18" wide seats) and (18, 19, 20" deep for 20" wide seats). Recline release levers are standard on the right side. Left side release levers can be ordered as a special with a new van seat. 21

23 Van Seat Upgrade Kits Kits allow chairs to be upgraded to the current seat mounting design. 22

24 Van Seat Upgrade Kits Kits allow chairs to be upgraded to the current seat mounting design. #1 Van Seat Upgrade Kits (Chairs built Before 9/1/02) Chair Width 18" 18" 20" 20" Arm Style Fixed Height Adjustable Height Fixed Height Adjustable Height Fold Down Grey Vinyl Seat N/A N/A Semi-Recline Grey Cloth Seat NLA NLA Semi-Recline Grey Vinyl Seat Semi-Recline Tan Vinyl Seat Kits include Van Seat, Arms, Seat Frame, Positioning Strap, Joystick Bracket, Seat Post, Seat Pivot, All Mounting Hardware, and Instruction Sheet. #2 Van Seat Upgrade Kit (Chairs built 9/1/02-7/13/03) All Fold Down and Semi-Recline Van Seats NLA Kit includes Seat Mounting Bracket, Seat Pivot, Seat Post, All Mounting Hardware, and Instruction Sheet. 23

25 Arms - Van Seat and Hardware 18" Wide Models (Before 9/1/02) Item Number Note Part Number Description Quantity Per Package Kit, Arm Pad w/ Screws, Full Length, Urethane 1 2 Waterfall, Black (13" L x 2-5/8" W) NLA NLA - Plate, Armrest (Black) Screw, Phillips Pan Head (#10-32 x 5/8") Screw, Socket Button Head (1/-20 x 1") NLA NLA - Nut, Hex (1/-20) Washer, Flat (5/16 x 5/8 x 1/16") Tube, Arm, Upper Height and Width Adjustable, 1 2 Black X013 Anti-Rattle (1") Screw, Socket Head (1/-20 x 1-1/") NLA NLA - Locknut (5/16-2) NLA NLA - Screw, Phillips Pan Head (#10-32 x 7/8") Insert, Armrest, Black Screw w/ Lug (5/16-2 x 1-3/8") A NLA NLA - Kit, Armrest Attaching Hardware (Pair) B NLA NLA - Kit, Arm Pad Attaching Hardware C NLA NLA - Arm Tube, Upper Adjustable (Pair) 2 1 NOTE: A - Includes items 2,, 5, 6, 10, 13 B - Includes items 3, 11, 12 C - Includes items 7-9 2

26 Arms - Van Seat and Hardware 20" Wide Models (Before 9/1/02) Item Number Note Part Number Description Quantity Per Package Kit, Arm Pad w/ Screws, Full Length, Urethane 1 2 Waterfall, Black (13" L x 2-5/8" W) NLA NLA - Plate, Armrest Screw, Phillips Pan Head (#10-32 x 5/8") Screw, Socket Button Head (1/-20 x 1") NLA NLA - Nut, Hex (1/-20) Washer, Flat (5/16 x 5/8 x 1/16") NLA NLA - Tube, Arm, Upper Adjustable, Black NLA NLA - Anti-Rattle Screw, Socket Head Cap w/ Patch (1/-20 x 1-1/2") NLA NLA - Locknut (5/16-2) NLA NLA - Screw, Phillips Pan Head (#10-32 x 7/8") NLA NLA - Insert, Armrest, Black Screw w/ Lug (5/16-2 x 1-3/8") A NLA NLA - Hardware, Armrest Attaching (Pair) B NLA NLA - Hardware, Arm Pad Attaching (Pair) C NLA NLA - Arm Tube, Upper Adjustable (Pair) 2 1 NOTE: A - Includes items 2,, 5, 6, 10, 13 B - Includes items 3, 11, 12 C - Includes items

27 Arms - Van Seat and Hardware 16-20" Wide Models (After 8/31/02) 26

28 Item Number Note Part Number Description 1 A 1 A 1 A 1 A 2 B B C C 2 Arms - Van Seat and Hardware 16-20" Wide Models (After 8/31/02) Quantity Per Package 1127 Arm, Adj. Height, Full Length, Black - Right Arm, Adj. Height, Full Length, Black - Left Arm, Adj. Height, Desk Length, Black Left Arm, Adj. Height, Desk Length, Black Right Upper Arm, Desk Length (Right/Left) 1 1 Pad, Arm, Desk Length, Black Urethane (12-1/" L x /8" W) Screw, Socket Head w/ Patch (5/16-18 x 1-3/") 1 1 Washer, Flat (5/16 x 5/8 x 1/16") 1 2 Locknut (5/16-18) 1 1 Screw, Hex Head w/ Patch (5/16-18 x 1-1/") 1 1 NLA - Nut, Hex (5/16-18) 1 1 Tube, Arm, Upper Adjustable Height, Black Upper Arm, Full Length (Right/Left) 1 1 Pad, Arm, Full Length, Urethane, Black (15" L x /8" W) Screw, Socket Head w/ Patch (5/16-18 x 1-3/") 1 1 Washer, Flat (5/16 x 5/8 x 1/16") 1 2 Locknut (5/16-18) 1 1 Screw, Hex Head w/ Patch (5/16-18 x 1-1/") 1 1 NLA - Nut, Hex (5/16-18) 1 1 Tube, Arm, Upper Adjustable Height, Black Pad, Arm, Desk Length, Black Urethane (12-1/" L x /8" W) Pad, Arm, Full Length, Urethane, Black (15" L x /8" W) Knob, Adjustment, Black (5/16-18 x 3/") Tube, Arm, Lower Adjustable Width, Black - Right Tube, Arm, Lower Adjustable Width, Black - Left Arm, Desk Length Fixed Height - Right 1 1 Pad, Arm, Desk Length, Black Urethane (12-1/" L x /8" W) Screw, Socket Head w/ Patch (5/16-18 x 1-3/") 1 1 Washer, Flat (5/16 x 5/8 x 1/16") 1 2 Locknut (5/16-18) 1 1 Screw, Hex Head w/ Patch (5/16-18 x 1-1/") 1 1 NLA - Nut, Hex (5/16-18) 1 1 Knob, Adjustment, Black (5/16-18 x 3/") 1 1 NLA - Tube, Arm, Fixed Height, Black - Right Arm, Desk Length Fixed Height - Left 1 1 Pad, Arm, Desk Length, Black Urethane (12-1/" L x /8" W) 27

29 Item Number Note Part Number Description Arms - Van Seat and Hardware 16-20" Wide Models (After 8/31/02) Quantity Per Package 3 Screw, Socket Head w/ Patch (5/16-18 x 1-3/") 1 1 Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) Screw, Hex Head w/ Patch (5/16-18 x 1-1/") NLA - Nut, Hex (5/16-18) Knob, Adjustment, Black (5/16-18 x 3/") NLA - Tube, Arm, Fixed Height, Black - Left C Arm, Full Length Fixed Height - Right Pad, Arm, Full Length, Urethane, Black (15" L x /8" W) Screw, Socket Head w/ Patch (5/16-18 x 1-3/") Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) Screw, Hex Head w/ Patch (5/16-18 x 1-1/") NLA - Nut, Hex (5/16-18) Knob, Adjustment, Black (5/16-18 x 3/") NLA - Tube, Arm, Fixed Height, Black - Right C Arm, Full Length Fixed Height - Left Pad, Arm, Full Length, Urethane, Black (15" L x /8" W) Screw, Socket Head w/ Patch (5/16-18 x 1-3/") Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) Screw, Hex Head w/ Patch (5/16-18 x 1-1/") NLA - Nut, Hex (5/16-18) Knob, Adjustment, Black (5/16-18 x 3/") NLA - Tube, Arm, Fixed Height, Black - Left 1 1 NOTE: A - Includes items B - Includes items 3-9. C - Includes items 3-8, 10, and item

30 Shrouds and Attaching Hardware Before 7/1/03 29

31 Shrouds and Attaching Hardware Before 7/1/03 Item #1 Side Shrouds (Includes Items 7 and 8) (Before 7/2/02) Dark Blue Metallic ProntoM50 Right ProntoM50 Left ProntoM51 Right NLA NLA NLA Note: When side shrouds become no longer available, refer to the side shroud pair number listed after 7/23/02. ProntoM51 Left NLA ProntoM50 Right NLA NOTE: ProntoM50 Left NLA ProntoM50 Pair NLA (After 7/23/02) Dark Blue Pearl ProntoM51 Right NLA A - No longer available. Use either or as the replacement. ProntoM51 Left ProntoM51 Pair NLA See Note(s) A (Before 8/9/02) Candy Apple Red ProntoM50 Right ProntoM50 Left ProntoM51 Right NLA NLA NLA Note: When side shrouds become no longer available, refer to the side shroud pair number listed after 8/8/02. ProntoM51 Left NLA (After 8/8/02) Candy Red Pearl ProntoM50 Right ProntoM50 Left ProntoM50 Pair ProntoM51 Right ProntoM51 Left ProntoM51 Pair NLA NLA NLA NLA NLA NLA 30

32 Shrouds and Attaching Hardware Before 7/1/03 Item Number Note Part Number Description Quantity Per Package 1 See Chart #1 Side Shrouds Dark Metallic Blue Before 7/2/ See Chart #1 Side Shrouds Candy Red Pearl After 8/8/ See Chart #1 Side Shrouds Dark Blue Pearl After 7/23/ See Chart #1 Side Shrouds Dark Metallic Blue Before 7/2/ Screw, Slotted Hex Washer Head (#10-32 x 5/8") Washer, Flat (3/16 x 5/8 x 1/16") Screw, Phillips Pan Head (#10-32 x 5/8") NLA NLA - Plate, Shroud -Right NLA NLA - Plate, Shroud -Left A NLA NLA - Hardware, Shroud, Side (1 Pair) NLA NLA - Decal, Shroud - M Decal, Shroud - M Decal, Drive/Push B NLA NLA - Kit, Shroud Clamp Hardware - Right B NLA NLA - Kit, Shroud Clamp Hardware - Left NLA NLA - Bracket, Clamp Shroud Mounting, Black Right NLA NLA - Bracket, Clamp Shroud Mounting, Black - Left Washer (1/ x 1/2 x 1/16") Locknut (1/-20) NLA NLA - Clamp, Shroud NLA NLA - Screw, Hex Head (1/-20 x 1") Decal, Invacare 3-D Logo (2-1/2" L) NLA NLA - Battery Shroud without Decal, Black - Front Battery Shroud without Decal, Black - Rear NLA NLA - Knob, Shroud, Black NLA NLA - Plate, Latch Shroud NLA NLA - Washer, Wave (17/32 x 3/ x 1/6") NLA NLA - Washer, Steel (13/6 x 1 x 3/6") Screw, Socket Head (#10-32 x 1/2") C NLA NLA - Hardware, Shroud Mounting - Rear Washer, Flat (3/16 x 5/8 x 1/16") Screw, Phillips Pan Head (#10-32 x 5/8") 1 2 NOTE: A - Includes items 2-5 B - Includes items 10-1 C - Includes items

33 Shrouds, Battery Cover, and Attaching Hardware After 7/13/03 32

34 Shrouds, Battery Cover, and Attaching Hardware After 7/13/03 #1 Dark Blue Pearl ProntoM50 Right ProntoM50 Left ProntoM50 Pair ProntoM51 Right ProntoM51 Left ProntoM51 Pair NLA NLA NLA NLA NLA #1 Candy Red Pearl ProntoM50 Right ProntoM50 Left ProntoM50 Pair ProntoM51 Right ProntoM51 Left ProntoM51 Pair NLA NLA NLA NLA NLA NLA 33

35 Shrouds, Battery Cover, and Attaching Hardware After 7/13/03 Item Number Note Part Number Description Quantity Per Package 1 E See Chart #1 Side Shrouds Candy Red Pearl E See Chart #1 Side Shrouds Dark Blue Pearl Screw, Slotted Hex Washer Head (#10-32 x 5/8") Washer, Flat (3/16 x 5/8 x 1/16") Screw, Phillips Pan Head (#10-32 x 5/8") NLA NLA - Plate, Shroud -Right NLA NLA - Plate, Shroud -Left B NLA NLA - Hardware, Shroud, Side (1 Pair) NLA NLA - Decal, Shroud - M Decal, Shroud - M Decal, Drive/Push C NLA NLA - Kit, Shroud Clamp Hardware - Right C NLA NLA - Kit, Shroud Clamp Hardware - Left NLA NLA - Bracket, Clamp Shroud Mounting, Black Right NLA NLA - Bracket, Clamp Shroud Mounting, Black - Left Washer (1/ x 1/2 x 1/16") Locknut (1/-20) NLA NLA - Clamp, Shroud NLA NLA - Screw, Hex Head (1/-20 x 1") Screw, Phillips Pan Head (#10-32 x 5/8") Washer, Flat (3/16 x 5/8 x 1/16") A Locknut (1/-20) A NLA NLA - Screw, Hex Head (1/-20 x 1-1/2") A NLA NLA - Bracket, Battery, Black A,D NLA NLA - Hardware, Battery Shroud Cover, Battery NLA NLA - Plate, Name, Patent Numbers NLA NLA - Label, Battery Warning Decal, Invacare 3-D Logo (2-1/2" L) NLA NLA - Battery Shroud with Decals, Black - Front NLA NLA - Battery Shroud with Decal, Black - Rear 1 1 NOTE: A - Items are only used on chairs built After 10/7/03. B - Includes items 2-5 C - Includes items 10-1 D - Includes items E - Includes decals, items 7 and 8 3

36 Casters, Forks and Hardware 35

37 Item Number Note Part Number Description Casters, Forks and Hardware Quantity Per Package Plug Button, Head Tube, Black Locknut (5/8-18) Washer, Nylon (5/8 x 1-5/16 x 1/8") X006 Bearing (5/8") NLA NLA - Headtube, Caster, Black - Right NLA NLA - Headtube, Caster, Black - Left E NLA NLA - Kit, Fork and Stem, Black (Pair) F Fork and Stem Cap, Front Head Tube, Black - Right Cap, Front Head Tube, Black - Left Screw, Socket Button Head Cap (3/8-2 x 3/") Bushing (3/8 x 1/2 x 2-1/8") Locknut (7/16-20) Washer, Steel (15/32 x 5/8 x 3/6") C NLA NLA - Wheel, Semi-Pneumatic, Urethane 1 1 (6" x 2") 12 D Wheel, Semi-Pneumatic, Urethane, Deep 1 1 Profile, Grey Tire/Black Hub (6" x 2") 12 D Wheel, Semi-Pneumatic, Urethane, Deep 2 1 Profile, Grey Tire/Black Hub (6" x 2") (Pair) Screw, Hex Head (7/16-20 x 3-1/") A Hardware, Caster Axle (Pair) B NLA NLA - Head Tube, Caster with Hardware - Right B Head Tube, Caster with Hardware - Left 1 1 NOTE: A - Includes items 10, 11, and 13 B - Includes items 5, 7-9 C - Chairs made before 7/1/03. Due to product improvement, it is recommended to order (pair) number dated after 7/13/03 so each side matches. The deep profile caster has 2 tread grooves w/ round corners instead of tread grooves w/ square corners. D - For chairs made after 7/13/03. The pair number is also used for converting casters on chairs made before 7/1/03. E - Chairs built Before 12/1/03. Due to design change, forks need to be replace in pairs. F - Chairs built After 11/30/03 36

38 Motor, Gearbox and Drive Wheel 37

39 Item Number Note Part Number Description 1 A 1 A 1 B 1 B 1 F 1 F 1 F 1 F C D E,G E,H Motor, Gearbox and Drive Wheel Quantity Per Package Motor/Gearbox - Right Motor/Gearbox - Left NLA NLA - Motor/Gearbox - Right Motor/Gearbox - Left Motor/Gearbox - Right E-NLA WARR RPLMT - Motor/Gearbox - Right NLA NLA - Motor/Gearbox - Left E-NLA NLA - WARR RPLMT - Motor/Gearbox Left NLA NLA - Kit, Motor/Brake Covers with Screws Kit, Motor Brush - Internal (Large) Kit, Motor Mounting Hardware 1 1 NLA - Screw, Socket Head (M6 x 1 x 30mm) 1 3 Screw, Socket w/ Patch (M6 x 1 x 20mm) NLA NLA - Pin, Clevis, Black (1/ x 37/6") Washer, Nylon (3/16 x 7/16 x 1/8") NLA NLA - Pin, Bridge NLA NLA - Lever, Motor Release Tip, Plastic, Black NLA NLA - Kit, Motor Lever and Mounting Hardware NLA NLA - Bushing, Snap Kit, Drive Wheel with Mounting Hardware Pneumatic (10 x 3") Key (6mm x 6mm x 0mm) 1 1 Washer, Flat (21/6 x 53/6 x 7/6") 1 1 Screw (M8 x 1.25 x 20mm) 1 1 Kit, Locking Tab Washer w/ Instruction Sheet (Pair) 2 1 NLA - Wheel, Drive w/ Bearings, 1 1 Pneumatic (10" x 3") Tire, Pneumatic, Grey (10" x 3") Tube, Inner (10 x 3") Kit, Drive Wheel with Mounting Hardware - Flat Free 1 1 (10 x 3") Key (6mm x 6mm x 0mm) 1 1 Washer, Flat (21/6 x 53/6 x 7/6") 1 1 Screw (M8 x 1.25 x 20mm) 1 1 Kit, Locking Tab Washer w/ Instruction Sheet (Pair) 1 1 Drive Wheel, Flat Free Foam, Grey 1 1 Tire/Black Rim (10" x 3") Tire w/ Foam Fill Insert, Grey (10" x 3")

40 NOTE: Motor, Gearbox and Drive Wheel A - Chairs built Before 6/27/03 B - Chairs built 6/27/03 thru 5/16/0 C - Includes items and 5 D - Includes items 7-11 E - Includes items 1-20 F - Chairs built After 5/16/0 G - Part # Drive Wheel will already include the Pneumatic Tire and Inner Tube. Part # is sold in kit assembly part # only. H - Part # Drive Wheel will already include the Tire w/ Foam Fill Insert. 39

41 Battery Covers and Harnesses (Harness and Connectors are part of the Covers) Before 10/8/03 0

42 Battery Covers and Harnesses (Harness and Connectors are part of the Covers) Before 10/8/03 Item Number Note Part Number Description Quantity Per Package 1 E NLA NLA - Cover, Battery w/ Connector, Single 1 1 Extended - Rear 2 E NLA NLA - Cover, Battery with Connectors, Dual Fixed Front NLA NLA - Decal, Front Battery Cover NLA NLA - Decal, Rear Battery Cover NLA NLA - Cap, Battery Terminal, Gray X000 Locknut (1/-20) NLA NLA - Screw, Hex Flange Whiz Lock(1/-20 x 5/8") NLA NLA - Cap, Battery Terminal, Orange C NLA NLA - Strap, Battery D NLA NLA - Strap, Battery Fuse, MIDI (Non-G/B & G/B) (80 AMP) 1 1 A,B NLA NLA - Hardware, Battery Terminal, UI Batteries 1 1 (Pair) A,F NLA NLA - Instruction Sheet, Battery Terminal Cable, Battery Extension, Black Connector 1 1 NOTE: A - Not Shown B - Includes items -7 C - Before 8/12/02 D - After 8/11/02 E - When a new battery cover is ordered for chairs manufactured before 8/12/02, a new battery strap part number must be ordered. Battery covers do not have to be ordered in pairs. F - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 1

43 Battery Harnesses After 10/7/03 Battery Covers are no longer used on chairs After 10/7/03 2

44 Item Number Note Part Number Description Battery Harnesses After 10/7/03 Battery Covers are no longer used on chairs After 10/7/03 Quantity Per Package Harness, Battery w/ 75 AMP Fuse and Red 1 1 Connector NLA NLA - Harness, Battery - Front Harness, Battery w/ 75 AMP Fuse and Black 1 1 Connector Harness, Battery - Rear X000 Locknut (1/-20) Washer, Locking Tab NLA NLA - Screw, Hex Flange Whiz Lock(1/-20 x 5/8") 1 A 98007X005 Tie Wrap (11-1/2" L) 1 6 A NLA NLA - Instruction Sheet, Battery Harness B NLA NLA - Harness, Battery w/ Terminal Hardware Cable, Battery Extension, Black Connector 1 1 NOTE: A - Not Shown B - Includes items 1-7 and Cables Ties, Instruction Sheet. 3

45 90FB Footboard

46 Item Number Note Part Number Description 90FB Footboard Quantity Per Package 1 A,B,E NLA NLA - Footboard Washer, Nylon (3/8 x 3/ x 1/16") Washer, Flat (3/8 x 11/16 x 1/16") 1 1 Screw, Socket Head (3/8-16 x 2-1/2") NLA - Footboard with Cover Bushing (3/8 x 5/8 x 1/2") Locknut, Low Profile (3/8-16) Screw, Set Socket Flat Point (5/16-18 x 1") Locknut (5/16-18) Bracket, Footboard Support, Black Pin, Quick Release Plug Button, Black (1" Square) A,B Footboard C,D Kit, 2" Footboard Extension Locknut, Low Profile (3/8-16) Bushing (3/8 x 5/8 x 1/2") Washer, Nylon (3/8 x 3/ x 1/16") Washer, Flat (3/8 x 11/16 x 1/16") Screw, Socket Head (3/8-16 x 2-1/2") Plug Button, Black (1" Square) Bracket, Footboard Support, Black (2" Extension) NLA - Bag, Zip-Lip (" L x " W) NLA - Instruction Sheet, 2" Footboard Extension Carton, Shipper 1 1 NOTE: A - Includes items 2-12 B - When ordering a footboard assembly for the first time that requires a 2" extension kit, items 5, 8, 9, 11 and 13 must be ordered C - Includes items 1-23 D - Part number is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. E - No Longer Available. Order part # as the recommended replacement. 5

47 Front Riggings Attachment Kit (FRKTM5) Before 9/1/02 Item Number Note Part Number Description Quantity Per Package X18 Carton, Hardware NLA NLA - Bag, Poly Zip-Lip (13" L x 9" W) B NLA NLA - Instruction Sheet, Front Rigging Hanger NLA NLA - Front Rigging Hanger w/ Plug 1 1 Button, Adult, Black - Right NLA NLA - Front Rigging Hanger w/ Plug 1 1 Button, Adult, Black - Left Plug Button, Black (3/") Screw, Socket Head (1/-20 x 1-1/") Locknut (1/-20) 1 8 A NLA NLA - Kit, Front Rigging Attachment (Pair) 2 1 NOTE: A - Includes items 1-, 6, 7 B - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 6

48 Front (Hemi) Riggings Attachment Kit After 8/31/02 7

49 Front (Hemi) Riggings Attachment Kit After 8/31/02 Item Number Note Part Number Description Quantity Per Package 8 A,C Kit, Front Rigging Hanger Attachment Carton, Shipper NLA - Bag, Poly Zip-Lip (13" L x 9" W) NLA - Instruction Sheet, Front Rigging Hanger 1 1 Front Rigging Hanger w/ Plug Button, 1 1 Hemi, Black - Right Front Rigging Hanger w/ Plug Button, 1 1 Hemi, Black - Left 5 Locknut (1/-20) 1 6 Spacer (1/ x 3/8 x 3/16") 1 7 Screw, Hex Head (1/-20 x 1-1/2") Plug Button, Black (3/") B Kit, Front Rigging Hanger Hardware Locknut (1/-20) 1 6 Spacer (1/ x 3/8 x 3/16") 1 7 Screw, Hex Head (1/-20 x 1-1/2") 1 NOTE: A - Includes items 1-7 B - Includes items 5-7 C - Part number is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 8

50 PW93 Footrest and Hardware Before 9/1/02 Note: Heel Loops are not included. See miscellaneous accessories. Note: Front riggings attachment kit (FRKTM5) must be present when using footrest. 9

51 PW93 Footrest and Hardware Before 9/1/02 Note: Heel Loops are not included. See miscellaneous accessories. Note: Front riggings attachment kit (FRKTM5) must be present when using footrest. Item Number Note Part Number Description Quantity Per Package Footrest Support, Adult, Black - Right Footrest Support, Adult, Black - Left Anti-Rattle, Black X057 Bushing (7/32 x 3/8 x 11/32") Screw, Phillips Pan Head (#10-32 x 11/16") Screw, Phillips Pan Head (#10-32 x 1/2") Handle, Release, Black - Right Handle, Release, Black - Left Locknut (#10-32) NLA NLA - Rivnut (#10-32) Spring, Release - Right Spring, Release - Left X012 Collar, Anti-Rattle (7/8") Screw, Hex Head (1/-20 x 1-1/2") Spacer, Coved (1/ x 11/16 x 1/2") Nut, Hex with Nylon Cap (1/-20) A Insert, Threaded Kit, Slide Tube Mounting Hardware Plug Button, Black (3/") Pivot/Slide Tube w/ Plug Button, Black X027 Footplate, Aluminum, Medium, Black (7-3/" W x 6" 1 1 L) Cap, End, Tube, Black (7/8") Spring, Tension X001 Screw, Phillips Pan Head (#8-32 x 3/8") Plug, Push, Footplate Pivot/Slide Tube w/ Aluminum Footplate, 1 1 Black - Right Pivot/Slide Tube w/ Aluminum Footplate, Black - Left 1 1 NOTE: A - As of 8/15/03, the Threaded Insert was revised from 3 to 5 Holes. Threaded Insert is Backward Compatible and does not require ordering in Pairs. 50

52 PHW93 (Hemi) Footrest and Hardware 9/1/02-1/5/03 Note: Heel Loops are not included. See miscellaneous accessories. Note: Front hemi rigging attachment kit (111997) must be present when using footrest. 51

53 PHW93 (Hemi) Footrest and Hardware 9/1/02-1/5/03 Note: Heel Loops are not included. See miscellaneous accessories. Note: Front hemi rigging attachment kit (111997) must be present when using footrest. Item Number Note Part Number Description A 7 A C B,D Quantity Per Package NLA NLA - Footrest Support, Hemi, Black - Right Footrest Support, Hemi, Black - Left Anti-Rattle, Black X057 Bushing (7/32 x 3/8 x 11/32") Screw, Phillips Pan Head (#10-32 x 11/16") Locknut (#10-32) Screw, Phillips Pan Head (#10-32 x 1/2") NLA - Handle, Release w/ Hardware, Black - Right NLA NLA - Handle, Release, Black - Left NLA NLA - Rivnut (#10-32) Spring, Release - Right Spring, Release - Left X012 Collar, Anti-Rattle (7/8") Screw, Hex Head (1/-20 x 1-1/2") Spacer, Coved (1/ x 11/16 x 1/2") Nut, Hex with Nylon Cap (1/-20) Insert, Threaded Kit, Slide Tube Mounting Hardware Plug Button, Black (3/") Pivot/Slide Tube w/ Plug Button, Black X027 Footplate, Aluminum, Medium, Black (7-3/" W x 6" 1 1 L) Cap, End, Tube, Black (7/8") Spring, Tension X001 Screw, Phillips Pan Head (#8-32 x 3/8") Plug, Push, Footplate Pivot/Slide Tube w/ Aluminum Footplate, 1 1 Black - Right Pivot/Slide Tube w/ Aluminum Footplate, 1 1 Black - Left Kit, Front Rigging Hanger Attachment 1 1 NLA - Bag, Poly Zip-Lip (13" L x 9" W) 1 1 NLA - Instruction Sheet, Front Rigging Hanger 1 1 Front Rigging Hanger w/ Plug Button, 1 1 Hemi, Black - Right Front Rigging Hanger w/ Plug Button, 1 1 Hemi, Black - Left Locknut (1/-20) 1 Spacer (1/ x 3/8 x 3/16") 1 52

54 PHW93 (Hemi) Footrest and Hardware 9/1/02-1/5/03 Note: Heel Loops are not included. See miscellaneous accessories. Note: Front hemi rigging attachment kit (111997) must be present when using footrest. Item Number Note Part Number Description NOTE: Quantity Per Package Screw, Hex Head (1/-20 x 1-1/2") 1 Carton, Shipper 1 1 A - Includes items 3-5 B - Not Shown C - As of 8/15/03, the Threaded Insert was revised from 3 to 5 Holes. Threaded Insert is Backward Compatible and does not require ordering in Pairs. D - Part number is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 53

55 PHW93 (Hemi) Footrest and Hardware After 1/5/03 Black 5

56 PHW93 (Hemi) Footrest and Hardware After 1/5/03 Black Item Number Note Part Number Description A 7 A D C 2 C 25 C 25 C 25 C 25 C 25 C 25 C Quantity Per Package Footrest Support, Hemi, Black - Right Footrest Support, Hemi, Black - Left Anti-Rattle, Black X057 Bushing (7/32 x 3/8 x 11/32") Screw, Phillips Pan Head (#10-32 x 11/16") Locknut (#10-32) Screw, Phillips Pan Head (#10-32 x 1/2") NLA NLA - Handle, Release, Black - Right NLA NLA - Handle, Release, Black - Left NLA NLA - Rivnut (#10-32) Spring, Release - Right Spring, Release - Left Tip, Plastic, Black X012 Collar, Anti-Rattle (7/8") Screw, Hex Head (1/-20 x 1-1/2") Spacer, Coved (1/ x 11/16 x 1/2") Nut, Hex with Nylon Cap (1/-20) Insert, Threaded Kit, Slide Tube Mounting Hardware Plug Button, Black (3/") Pivot/Slide Tube w/ Plug Button, Black X027 Footplate, Aluminum, Medium, Black (7-3/" W x 6" 1 1 L) Cap, End, Tube, Black (7/8") Spring, Tension X001 Screw, Phillips Pan Head (#8-32 x 3/8") Plug, Push, Footplate Pivot/Slide Tube w/ Aluminum Footplate, 1 1 Black - Right Pivot/Slide Tube w/ Aluminum Footplate, 1 1 Black - Left Pivot/Slide Tube w/ Large Composite 1 1 Footplate, Black - Right Pivot/Slide Tube w/ Large Composite 1 1 Footplate, Black - Left Pivot/Slide Tube w/ Composite Footplate, 1 1 Black - Right (2" Longer) Pivot/Slide Tube w/ Composite Footplate, 1 1 Black - Left (2" Longer) Pivot/Slide Tube w/ Composite Footplate, 1 1 Black - Right (" Longer) Pivot/Slide Tube w/ Composite Footplate, 1 1 Black - Left (" Longer) 55

57 PHW93 (Hemi) Footrest and Hardware After 1/5/03 Black Item Number Note Part Number Description NOTE: Quantity Per Package Tube, Pivot/Slide, Curved End, Steel, Black (9-7/8") Tube, Pivot/Slide, Curved End, 2" Longer, Steel, 1 1 Black Tube, Pivot/Slide, Curved End, " Longer, Steel, 1 1 Black Spacer, Coved (1/ x 3/ x 11/32") Plug Button, Black (3/") X006 Screw, Socket Head (1/-20 x 2-1/") Locknut (1/-20) Footplate, Composite, Large, Black (8" W x 6" L) 1 1 B,E Kit, Front Rigging Hanger Attachment 1 1 NLA - Bag, Poly Zip-Lip (13" L x 9" W) 1 1 NLA - Instruction Sheet, Front Rigging Hanger 1 1 Front Rigging Hanger w/ Plug Button, 1 1 Hemi, Black - Right Front Rigging Hanger w/ Plug Button, 1 1 Hemi, Black - Left Locknut (1/-20) 1 Spacer (1/ x 3/8 x 3/16") 1 Screw, Hex Head (1/-20 x 1-1/2") 1 Carton, Shipper 1 1 A - Includes items 3-5 B - Not Shown C - For 18" and 20" wide chairs D - As of 8/15/03, the Threaded Insert was revised from 3 to 5 Holes. Threaded Insert is Backward Compatible and does not require ordering in Pairs. E - Part number is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 56

58 PW93ST Footrest and Hardware Before 9/1/02 NOTE: Heel Loops are not included. See miscellaneous accessories. NOTE: Front riggings attachment kit (FRKTM5) must be present when using footrest. 57

59 PW93ST Footrest and Hardware Before 9/1/02 NOTE: Heel Loops are not included. See miscellaneous accessories. NOTE: Front riggings attachment kit (FRKTM5) must be present when using footrest. Item Number Note Part Number Description Quantity Per Package NLA NLA - Footrest Support, Adult, Black Right NLA NLA - Footrest Support, Adult, Black Left Screw, Phillips Pan Head (#10-32 x 11/16") Screw, Phillips Pan Head (#10-32 x 1/2") Handle, Release, Black - Right Handle, Release, Black - Left Locknut (#10-32) NLA NLA - Rivnut (#10-32) NLA NLA - Cushion, Tubular Foam NLA NLA - Cover, Foam Cushion Spring, Release - Right Spring, Release - Left X057 Bushing (7/32 x 3/8 x 11/32") X012 Collar, Anti-Rattle (7/8") Kit, Slide Tube Mounting Hardware Screw, Hex Head (1/-20 x 1-1/2") Spacer, Coved (1/ x 11/16 x 1/2") Nut, Hex with Nylon Cap (1/-20) C Insert, Threaded A Pivot/Slide Tube w/ Medium Composite 1 1 Footplate, Black - Right (18" W) 17 A Pivot/Slide Tube w/ Medium Composite Footplate 1 1, Black - Left (18" W) 17 B Pivot/Slide Tube w/ Large Composite 1 1 Footplate, Black - Right 17 B Pivot/Slide Tube w/ Large Composite 1 1 Footplate, Black - Left Tube, Pivot/Slide, Curved End, Steel, Black (9-7/8") Spacer, Coved (1/ x 3/ x 11/32") Plug Button, Black (3/") X006 Screw, Socket Head (1/-20 x 2-1/") Locknut (1/-20) A Footplate, Composite, Medium, Black (7" W x 6" L) NOTE: B A - 18" Wide B - 20" Wide Footplate, Composite, Large, Black (8" W x 6" L) 1 1 C - As of 8/15/03, the Threaded Insert was revised from 3 to 5 Holes. Threaded Insert is Backward Compatible and does not require ordering in Pairs. 58

60 P90A Legrest Supports (Before 9/1/02) NOTE: Front rigging attachment kit (FRKTM5) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. 59

61 P90A Legrest Supports (Before 9/1/02) NOTE: Front rigging attachment kit (FRKTM5) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. Item Number Note Part Number Description A,D B 18 B Quantity Per Package NLA NLA - Legrest Support, Adult, Black - Right NLA NLA - Legrest Support, Adult, Black Left Screw, Phillips Pan Head (#10-32 x 11/16") Screw, Phillips Pan Head (#10-32 x 1/2") Handle, Release, Black - Right Handle, Release, Black - Left X057 Bushing (7/32 x 3/8 x 11/32") Spring, Release - Right Spring, Release - Left Locknut (#10-32) NLA NLA - Rivnut (#10-32) Plug Button, Black (7/8") X000-NLA NLA - Screw, Slotted Truss Head (3/8-16 x 1-1/2") Washer, Nylon (25/6 x 7/8 x 1/32") X000 Hex Nut (3/8"-16) Pad, Legrest, Vinyl - Right/Left Locknut (5/16-2) Bolt, Lug (5/16-2 x 1-3/8") NLA NLA - Tube, Elevating Adjustable Support, Black Right NLA NLA - Tube, Elevating Adjustable Support, Black Left Plug Button, Black (3/") NLA NLA - Legrest Support Tube, Adult, Black Right NLA NLA - Legrest Support Tube, Adult, Black Left 2326X00 Bar, Ratchet - Right/Left X000 Nut, Acorn (5/16-2) Bumper Screw, Phillips Pan Head Tap (#10-32 x 3/") Tip, Plastic, Black X002 Bracket, Release, Black Cam, Legrest Spring, Release Handle, Release Washer, Nylon (5/16 x 11/16 x 1/16") Ring, Snap Bracket, Legrest Pad Mounting, Black

62 P90A Legrest Supports (Before 9/1/02) NOTE: Front rigging attachment kit (FRKTM5) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. Item Number Note Part Number Description Quantity Per Package X019 Plate, Legrest Pad Spacer, Legrest Pad, Black Spacer, Legrest Pad Mounting, Black Screw, Hex Head (5/16-2 x 3-1/2") Screw, Hex Head (5/16-2 x 1-1/2") C Hardware, Legrest Pad 1 1 Screw, Phillips Pan Head (#10-32 x 11/16") 1 2 Screw, Phillips Pan Head (#10-32 x 1") 1 2 Instruction Sheet, Legrest Pad Mtg. 1 1 NOTE: A - Specify upholstery color U67 Black when ordering. B - No longer available as a service part individually, use Item 1 (11086 or ) as the replacement. C - Item includes Screws and Instruction Sheet. D - Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. 61

63 PH90A (Hemi) Legrest Supports (9/1/02-1/5/03) Color NOTE: Front hemi rigging attachment kit (111997) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. 62

64 PH90A (Hemi) Legrest Supports (9/1/02-1/5/03) Color NOTE: Front hemi rigging attachment kit (111997) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. Item Number Note Part Number Description 1 A 1 A D 10 D B 16 B C,H Quantity Per Package NLA NLA - Handle, Release, Black - Left NLA NLA - Handle, Release, Black - Right Screw, Phillips Pan Head (#10-32 x 11/16") X057 Bushing (7/32 x 3/8 x 11/32") Locknut (#10-32) Screw, Phillips Pan Head (#10-32 x 1/2") Spring, Release - Right Spring, Release - Left X000 Rivnut (#10-32) Screw, Phillips Pan Head Tap (#10-32 x 3/") Bumper NLA NLA - Legrest Support Tube, Hemi, Black Right NLA NLA - Legrest Support Tube, Hemi, Black Left 11919X000-NLA NLA - Screw, Slotted Truss Head (3/8-16 x 1-1/2") X000 Hex Nut (3/8"-16) Handle, Release Tip, Plastic, Black Washer, Nylon (25/6 x 7/8 x 1/32") Tube, Elevating Adjustable Support, Color - Right Tube, Elevating Adjustable Support, Color - Left Screw, Hex Head (5/16-2 x 1-1/2") Screw, Hex Head (5/16-2 x 3-1/2") Locknut (5/16-2) Bolt, Lug (5/16-2 x 1-3/8") Bracket, Legrest Pad Mounting, Black Spacer, Legrest Pad, Black X019 Plate, Legrest Pad Spacer, Legrest Pad Mounting, Black Bar, Ratchet X003 Spacer (5/16 x 1/2 x 3/8") Washer, Nylon (5/16 x 11/16 x 1/16") X002 Bracket, Release, Black X000 Nut, Acorn (5/16-2) Ring, Snap Cam, Legrest Spring, Release Pad, Legrest, Vinyl - Right/Left

65 PH90A (Hemi) Legrest Supports (9/1/02-1/5/03) Color NOTE: Front hemi rigging attachment kit (111997) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. Item Number Note Part Number Description Quantity Per Package 3 G Hardware, Legrest Pad 1 1 Screw, Phillips Pan Head (#10-32 x 11/16") 1 2 Screw, Phillips Pan Head (#10-32 x 1") 1 2 Instruction Sheet, Legrest Pad Mtg. 1 1 F,I Kit, Front Rigging Hanger Attachment 1 1 NLA - Bag, Poly Zip-Lip (13" L x 9" W) 1 1 NLA - Instruction Sheet, Front Rigging Hanger 1 1 Front Rigging Hanger w/ Plug Button, 1 1 Hemi, Black - Right Front Rigging Hanger w/ Plug Button, 1 1 Hemi, Black - Left Locknut (1/-20) 1 Spacer (1/ x 3/8 x 3/16") 1 Screw, Hex Head (1/-20 x 1-1/2") 1 Carton, Shipper 1 1 B,E Legrest Support, Hemi, Color - Right 1 1 B,E Legrest Support, Hemi, Color - Left 1 1 NOTE: A - Includes items 2- B - Specify 3P flat black frame finish when ordering. C - Specify Upholstery color U67 Black when ordering. D - Includes #1 and 5-9 E - See pictorial for reference. F - Not Shown G - Includes Screws and Instruction Sheet. H - Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. I - Part number is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 6

66 PH90A (Hemi) Legrest Supports (After 1/5/03) Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. 65

67 PH90A (Hemi) Legrest Supports (After 1/5/03) Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. Item Number Note Part Number Description Quantity Per Package X000-NLA NLA - Screw, Slotted Truss Head (3/8-16 x 1-1/2") Legrest Support, Black - Right Legrest Support, Black - Left Tip, Plastic, Black X000 Hex Nut (3/8"-16) Handle, Release Tip, Plastic, Black Washer, Nylon (25/6 x 7/8 x 1/32") Screw, Hex Head (5/16-2 x 3-1/") Bracket, Calf Pad Mounting, Black C Tube, Elevating Adjustable Support, Color - Right C Tube, Elevating Adjustable Support, Color - Left Nut, Low Cap (5/16"-2) Bolt, Lug (5/16-2 x 1-3/8") X008 Spring, Leaf X003 Bushing, Pivot (5/16 x 7/16 x 7/8") Spacer, Legrest Pad, Black X019 Plate, Legrest Pad Bar, Ratchet Spring, Release Cam, Legrest X003 Bushing, Pivot (5/16 x 7/16 x 7/8") Washer, Nylon (5/16 x 11/16 x 1/16") X002 Bracket, Release, Black X000 Nut, Acorn (5/16-2) Ring, Snap Locknut (5/16-2) A,C Legrest Support, Hemi, Color - Right A,C Legrest Support, Hemi, Color - Left B,E Pad, Legrest, Vinyl - Right/Left D Hardware, Legrest Pad 1 1 Screw, Phillips Pan Head (#10-32 x 11/16") 1 2 Screw, Phillips Pan Head (#10-32 x 1") 1 2 Instruction Sheet, Legrest Pad Mtg. 1 1 NOTE: A - Includes items 1-25 B - Specify U67 Black upholstery color when ordering. C - Specify 3P Flat Black Frame Finish When Ordering. D - Includes Screws and Instruction Sheet. E - Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. 66

68 PALA Articulating Legrest Supports (Before 9/1/02) Chrome NOTE: Front rigging attachment kit (FRKTM5) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. 67

69 PALA Articulating Legrest Supports (Before 9/1/02) Chrome NOTE: Front rigging attachment kit (FRKTM5) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. Item Number Note Part Number Description A,C Quantity Per Package NLA NLA - Legrest Support, Articulating, Adult, Chrome - Right NLA NLA - Legrest Support, Articulating, Adult, 1 1 Chrome - Left Screw, Phillips Oval Head (#10-16 x 7/8") Screw, Phillips Pan Head (#10-32 x 1/2") Handle, Release, Black - Right Handle, Release, Black - Left X057 Bushing (7/32 x 3/8 x 11/32") Spring, Release - Right Spring, Release - Left Locknut (#10-32) NLA NLA - Rivnut (#10-32) NLA NLA - Tube, Legrest Support - Right NLA NLA - Tube, Legrest Support - Left Plug Button, Black (3/") X000 Hex Nut (3/8"-16) NLA NLA - Screw, Shoulder Slotted Head (1/2 x 1-1/8", 1 1 3/8-16) NLA NLA - Tube, Support and Drive Link, Chrome - Right NLA NLA - Tube, Support and Drive Link, Chrome - Left Pad, Legrest, Vinyl - Right/Left Tube, Slide, Articulating, Chrome - Right Tube, Slide, Articulating, Chrome - Left Washer (#20) X001 Locknut (5/16-2) X009 Bolt, Lug (5/16-2 x 1-3/8") NLA NLA - Screw, Socket Button Head (3/8-16 x 3/") Washer, Nylon (3/8 x 3/ x 1/16") Bracket, Legrest, Chrome NLA NLA - Bar, Link, Black NLA NLA - Bar, Ratchet - Right NLA NLA - Bar, Ratchet - Left X000 Nut, Acorn (5/16-2) Tip, Plastic, Black X002 Bracket, Release, Black Cam, Legrest Spring, Release Handle, Release Washer, Nylon (5/16 x 11/16 x 1/16") Ring, Snap

70 PALA Articulating Legrest Supports (Before 9/1/02) Chrome NOTE: Front rigging attachment kit (FRKTM5) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. Item Number Note Part Number Description Quantity Per Package X008 Spring, Leaf Spacer, Legrest Pad, Black X019 Plate, Legrest Pad Screw, Hex Head (5/16-2 x 3-1/") B Hardware, Legrest Pad 1 1 Screw, Phillips Pan Head (#10-32 x 11/16") 1 2 Screw, Phillips Pan Head (#10-32 x 1") 1 2 Instruction Sheet, Legrest Pad Mtg X003 Bushing, Pivot (5/16 x 7/16 x 7/8") 1 2 NOTE: A - Specify upholstery color U67 black when ordering. B - Item includes Screws and Instruction Sheet. C - Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. 69

71 PHALA (Hemi) Articulating Legrest Supports 9/1/02-1/5/03 Chrome Note: Front (hemi) rigging attachment kit (111997) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. 70

72 PHALA (Hemi) Articulating Legrest Supports 9/1/02-1/5/03 Chrome Note: Front (hemi) rigging attachment kit (111997) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. Item Number Note Part Number Description A 3 A E Quantity Per Package Screw, Phillips Pan Head Tap (#10-32 x 3/") Bumper NLA NLA - Handle, Release, Chrome - Right NLA NLA - Handle, Release, Chrome - Left X057 Bushing (7/32 x 3/8 x 11/32") X003 Locknut (#10-32) X008 Screw, Phillips Pan Head (#10-32 x 11/16") Spring, Release - Right Spring, Release - Left X000 Rivnut (#10-32) X002 Screw, Phillips Round Head (#10-32 x 1/2") NLA NLA - Legrest Support Tube, Hemi, 1 1 Chrome - Right NLA NLA - Legrest Support Tube, Hemi, 1 1 Chrome - Left Plug Button, Black (3/") Tip, Plastic, Black Handle, Release Washer, Nylon (3/8 x 3/ x 1/16") NLA NLA - Screw, Socket Button Head (3/8-16 x 3/") X000 Hex Nut (3/8"-16) NLA NLA - Bar, Link, Black NLA NLA - Tube, Support and Drive Link, Chrome - Right NLA NLA - Tube, Support and Drive Link, Chrome - Left NLA NLA - Screw, Shoulder Slotted Head (1/2 x 1-1/8", 1 1 3/8-16) 10261X000 Nut, Acorn (5/16-2) X002 Bracket, Release, Black Ring, Snap X003 Bushing, Pivot (5/16 x 7/16 x 7/8") X00 Bar, Ratchet - Right/Left Spring, Release Cam, Legrest Washer, Nylon (5/16 x 11/16 x 1/16") NLA NLA - Decal, Smartleg Screw, Hex Head (5/16-2 x 3-1/") X008 Spring, Leaf X003 Bushing, Pivot (5/16 x 7/16 x 7/8") Spacer, Legrest Pad, Black X019 Plate, Legrest Pad X001 Locknut (5/16-2)

73 PHALA (Hemi) Articulating Legrest Supports 9/1/02-1/5/03 Chrome Note: Front (hemi) rigging attachment kit (111997) must be present when using legrest. Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. Item Number Note Part Number Description Quantity Per Package Bracket, Legrest, Chrome X009 Bolt, Lug (5/16-2 x 1-3/8") Tube, Slide, Articulating, Chrome - Right Tube, Slide, Articulating, Chrome - Left Washer (#20) Nut, Low Cap (5/16"-2) B,G Pad, Legrest, Vinyl - Right/Left F Hardware, Legrest Pad 1 1 Screw, Phillips Pan Head (#10-32 x 11/16") 1 2 Screw, Phillips Pan Head (#10-32 x 1") 1 2 Instruction Sheet, Legrest Pad Mtg. 1 1 C,H Kit, Front Rigging Hanger Attachment 1 1 NLA - Bag, Poly Zip-Lip (13" L x 9" W) 1 1 NLA - Instruction Sheet, Front Rigging Hanger 1 1 Front Rigging Hanger w/ Plug Button, 1 1 Hemi, Black - Right Front Rigging Hanger w/ Plug Button, 1 1 Hemi, Black - Left Locknut (1/-20) 1 Spacer (1/ x 3/8 x 3/16") 1 Screw, Hex Head (1/-20 x 1-1/2") 1 Carton, Shipper 1 1 D NLA NLA - Legrest Support, Articulating, 1 1 Hemi, Chrome - Right D,E NLA NLA - Legrest Support, Articulating, Hemi, Chrome - Left 1 1 NOTE: A - Right release handle is used on the left side support and the left release handle is used on the right side support. B - Specify upholstery color U67 black when ordering. C - Not Shown D - See pictorial for reference. E - No longer available as a service part. There is no replacement. F - Includes Screws and Instruction Sheet. G - Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. H - Part number is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 72

74 PHALA (Hemi) Articulating Legrest Supports (After 1/5/03) Chrome Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. 73

75 PHALA (Hemi) Articulating Legrest Supports (After 1/5/03) Chrome Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. Item Number Note Part Number Description 1 B 1 B 2 C,F 2 F Quantity Per Package Legrest Support, Articulating, Hemi, Chrome - Right Legrest Support, Articulating, Hemi, 1 1 Chrome - Left NLA NLA - Tube, Legrest Support, Hemi, Chrome - Right Tube, Legrest Support, Hemi, Chrome - Left Screw, Phillips Pan Head Tap (#10-32 x 3/") Bumper NLA NLA - Handle, Release, Chrome - Right Handle, Release, Chrome - Left X057 Bushing (7/32 x 3/8 x 11/32") X003 Locknut (#10-32) X008 Screw, Phillips Pan Head (#10-32 x 11/16") Spring, Release - Right Spring, Release - Left X000 Rivnut (#10-32) X002 Screw, Phillips Round Head (#10-32 x 1/2") Plug Button, Black (3/") Tip, Plastic, Black Tip, Plastic, Black Handle, Release Washer, Nylon (3/8 x 3/ x 1/16") NLA NLA - Screw, Socket Button Head (3/8-16 x 3/") X000 Hex Nut (3/8"-16) NLA NLA - Bar, Link, Black NLA NLA - Tube, Support and Drive Link, Chrome - Right NLA NLA - Tube, Support and Drive Link, Chrome - Left NLA NLA - Screw, Shoulder Slotted Head (1/2 x 1-1/8", 1 1 3/8-16) 10261X000 Nut, Acorn (5/16-2) X002 Bracket, Release, Black Ring, Snap X003 Bushing, Pivot (5/16 x 7/16 x 7/8") X00 Bar, Ratchet - Right/Left Spring, Release Cam, Legrest Washer, Nylon (5/16 x 11/16 x 1/16") NLA NLA - Decal, Smartleg Screw, Hex Head (5/16-2 x 3-1/") X008 Spring, Leaf X003 Bushing, Pivot (5/16 x 7/16 x 7/8") Spacer, Legrest Pad, Black 1 1 7

76 PHALA (Hemi) Articulating Legrest Supports (After 1/5/03) Chrome Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. Item Number Note Part Number Description Quantity Per Package X019 Plate, Legrest Pad X001 Locknut (5/16-2) Bracket, Legrest, Chrome X009 Bolt, Lug (5/16-2 x 1-3/8") Tube, Slide, Articulating, Chrome - Right Tube, Slide, Articulating, Chrome - Left Washer (#20) Nut, Low Cap (5/16"-2) A,E Pad, Legrest, Vinyl - Right/Left D Hardware, Legrest Pad 1 1 Screw, Phillips Pan Head (#10-32 x 11/16") 1 2 Screw, Phillips Pan Head (#10-32 x 1") 1 2 Instruction Sheet, Legrest Pad Mtg. 1 1 NOTE: A - Specify upholstery color U67 black when ordering. B - Includes items 3-1 C - No Longer Available individually. See part # for replacement. D - Item Includes Screws and Instruction Sheet. E - Due to a change to the Legrest Calf Pad size made on /23/12, you must also order the hardware kit (106869) when ordering replacement Calf Pads. F - Includes items

77 Pivot/ Slide Tube and Footplate - Legrests For the Following Legrests: P90A PH90A, PALA, PHALA Note: Heel Loops are not included. See miscellaneous accessories. 76

78 Pivot/ Slide Tube and Footplate - Legrests For the Following Legrests: P90A PH90A, PALA, PHALA Note: Heel Loops are not included. See miscellaneous accessories. Item Number Note Part Number Description Quantity Per Package Plug Button, Black (3/") A NLA NLA - Pivot/Slide Tube w/ Plug Button, Black B Pivot/Slide Tube w/ Plug Button, Chrome X027 Footplate, Aluminum, Medium, Black (7-3/" W x 6" 1 1 L) Cap, End, Tube, Black (7/8") Spring, Tension X001 Screw, Phillips Pan Head (#8-32 x 3/8") Plug, Push, Footplate A Pivot/Slide Tube w/ Aluminum Footplate, Black Right 8 A Pivot/Slide Tube w/ Aluminum Footplate, 1 1 Black - Left 8 B Pivot/Slide Tube w/ Aluminum Footplate, 1 1 Chrome - Right 8 B Pivot/Slide Tube w/ Aluminum Footplate, Chrome - Left 1 1 NOTE: A - For P90A, PH90A B - For PALA, PHALA 77

79 MKIV RII Joystick and Mounting Hardware Before 6/27/03 78

80 MKIV RII Joystick and Mounting Hardware Before 6/27/03 Item Number Note Part Number Description Quantity Per Package Knob, Joystick Rubber, Black Skirt, Joystick Rubber, Black NLA NLA - Inductive, Joystick X36-NLA NLA - Boot, Joystick Switch, Toggle SPDT NLA NLA - Potentiometer, Speed NLA NLA - Knob, Speed Control NLA NLA - Joystick, MKIV RII B Kit, 2" Offset Joystick Tube w/ Hardware Plug Button, Black (7/8") Tube, Joystick Offset (2") Tie Wrap (11-1/2" L) Screw, Phillips Pan Head (#10-32 x 1-1/8") Screw, Phillips Pan Head (M5 x.8 x 30mm) Spacer, Joystick Tube, Black Plug Button, Black (7/8") NLA NLA - Package, Tie Wrap (11-1/2" L) F Clamp, Fixed Height, Captain/ Van Seat D Screw, Hex Head (1/-20 x 1-1/") E Screw, Hex Head (1/-20 x 1-5/8") D NLA NLA - Spacer (1/ x 7/16 x 5/8") E Spacer (1/ x 3/8 x 1") Locknut (1/-20) C,D,F NLA NLA - Kit, Joystick Tube Mounting Hardware Captain/ Van Seat 19 C,E,F Kit, Joystick Tube Mounting Hardware - Captain 1 1 Seat A Extension, Joystick, Straight Style (1561) 1 1 (1/2" W x 5" L) A Extension, Joystick, "T" Style (1560) (" W x 5-1/2" L) 1 1 NOTE: A - Not Shown B - Includes items 10 thru 1. Kit contains Standard (#10-32) and Metric (M5) screws. Customer selects the screws that applies to their application. C - Includes items 15 thru 18. D - Before 9/1/02 E - After 8/31/02 F - Due to product improvement, the joystick mounting bracket with a separate adjustment lock were replaced with the clamp assembly shown as of 2/20/03 and is backward compatible. 79

81 MK5 SPJ (After 6/26/03) & SPJ+ (Introduced 8/16/05) Joystick and Mounting Hardware The SPJ+ Joystick plus Cable Kit replaces the SPJ Joystick after 10/31/07. 80

82 MK5 SPJ (After 6/26/03) & SPJ+ (Introduced 8/16/05) Joystick and Mounting Hardware The SPJ+ Joystick plus Cable Kit replaces the SPJ Joystick after 10/31/07. Item Number Note Part Number Description 1 A,G H E B C D D Quantity Per Package Kit, SPJ+ Joystick w/ Cable 1 1 Joystick, SPJ+ 1 1 Knob, Joystick Rubber, Black 1 1 Skirt, Joystick Rubber, Black 1 1 NLA - Overlay, SPJ+ Joystick 1 1 Cable, Joystick SPJ Cable, Joystick Extension Joystick, SPJ+ 1 1 See Note-NLA See Footnote Knob, Joystick Rubber, Black Skirt, Joystick Rubber, Black Kit, Overylay, SPJ+ Joystick (MK5/MK6) 1 1 NLA - Overlay, SPJ+ Joystick 1 1 Instruction Sheet, MK5/MK6 Overlay Cable, Joystick SPJ Cable, Joystick Extension Kit, 2" Offset Joystick Tube w/ Hardware 1 1 Plug Button, Black (7/8") 1 1 Tie Wrap (11-1/2" L) 1 2 Screw, Phillips Pan Head (#10-32 x 1-1/8") 1 2 Screw, Phillips Pan Head (M5 x.8 x 30mm) 1 2 Spacer, Joystick Tube, Black 1 1 Tube, Joystick Offset (2") Kit, 1/2" Offset Joystick Tube with Hardware Plug Button, Black (7/8") NLA NLA - Package, Tie Wrap (11-1/2" L) Screw, Phillips Pan Head (#10-32 x 1-1/8") Spacer, Joystick Tube, Black Kit, Joystick Tube Mounting Hardware - Captain 1 1 Seat Clamp, Fixed Height, Captain/ Van Seat Screw, Hex Head (1/-20 x 1-5/8") Spacer (1/ x 3/8 x 1") Locknut (1/-20) Clamp, Height Adjustable Joystick Tube (ARM250) Clamp, Fixed Height Joystick Tube Extension, Joystick, "T" Style (1560) 1 1 (" W x 5-1/2" L) Extension, Joystick, Straight Style (1561) 1 1 (1/2" W x 5" L) 81

83 NOTE: MK5 SPJ (After 6/26/03) & SPJ+ (Introduced 8/16/05) Joystick and Mounting Hardware The SPJ+ Joystick plus Cable Kit replaces the SPJ Joystick after 10/31/07. A - Includes items 2 thru 6. B - Used on A.S.B.A. seats. Includes Joystick Tube plus items 9 thru 12. C - Includes items 1 thru 17. D - Not Shown. E - Used on Van Seats. Includes Joystick Tube and items 9 thru 13. Kit contains Standard (#10-32) and Metric (M5) screws. Customer selects the screw that applies to their application. G - Before replacing your joystick, verify with Invacare Technical Service Phone Support first to see if only a Joystick Overlay Kit is needed H - MK5 SPJ Joystick part number is no longer available as a service part. Use item # as the replacement. 82

84 MKIV Controllers, Programmer and Battery Chargers Before 6/27/03 83

85 MKIV Controllers, Programmer and Battery Chargers Before 6/27/03 Item Number Note Part Number Description A 5 6 B 7 G,L 7 G 7 H D 17 I 17 J 17 K 17 K 18 M C,E C,F C,E C C C C C C Quantity Per Package NLA NLA - Screw (#8-32 x 1/2") Locknut (1/-20) NLA NLA - Bracket, Controller Mounting with Decals, 1 1 Black Washer (1/ x 1/2 x 1/16") NLA NLA - Screw, Hex Head (1/-20 x 2") NLA NLA - Controller Mounting Hardware NLA NLA - Controller, MKIV RII E-NLA NLA - WARR RPLMT - Controller, MKIV RII NLA NLA - Conroller, MKIV RII LP NLA NLA - Package, Tie Wrap (11-1/2" L) Screw, Socket Button Head (1/-20 x 5/8") NLA NLA - Strap, Cable Nut, Hex with Nylon Cap (1/-20) NLA NLA - Fastener, Loop with Adhesive Back (1" W x 1 1 " L) NLA NLA - Tie Wrap, Hook and Loop (8" L) NLA NLA - Hook Fastener with Adhesive Back (2" W x /2" L) NLA NLA - Bushing, Relief Strain NLA NLA - On-Board Charger Mounting Hardware Battery Charger, 3 Amp, 115vac, On Board, 1 1 Dual Mode, Round Plug Charger, Battery, 8 Amp, 115vac, Off Board 1 1 Dual Mode Round Plug, Lester Charger, Battery, 8 Amp. 115vac (Off Board) 1 1 Single Mode Round Plug w/ AC Power Line Cord E-NLA NLA - WARR RPLMT - Charger, Battery, 8 Amp, VAC (Off Board) Single Mode Round Plug w/ AC Power Line Cord NLA NLA - Cord, AC Power, 115VAC, 2 Prong Off-Board 1 1 (11' 6" L) Cord, AC Power, 115VAC, 3 Prong On-Board (6' /2" L) NLA NLA - Programmer, Remote NLA NLA - Virtual Service Modem Kit NLA NLA - Virtual Service Software Kit NLA NLA - MKIV One 2 One Software Kit Cable, Virtual Service, Charger/Modem NLA NLA - Disk, 3.5 H.D. Floppy with V.S. Software NLA NLA - Adaptor, Null Modem NLA NLA - Service Manual - V.S. Software Kit Decal, Transportation NLA NLA - Plate, Name, Patent Numbers 1 1 8

86 NOTE: MKIV Controllers, Programmer and Battery Chargers Before 6/27/03 A - Transportation lable part number and patent number name plate part number 60106X013 are included wiht the controller bracket B - Includes items 1-5 C - Not Shown D - Includes items 8-15 E - Part number is available for individual sale. F - Part numbers , , , and are available for individual sale. G - Pronto M51 H - Pronto M50 I - On-Board J - Optional K - CTE charger introduced /1/0. Used on Gel Cell or AGM (Absorbed Glass Mat) batteries. Serial number starts with 0A For wet cell batteries refer to the Lester 8 Amp. charger. L - Part # is No Longer Available. See part # E as a replacement. M - No longer available as a service part. Please use as its replacement. 85

87 Electronics - MK5 NX Controllers, Programmer and Battery Chargers After 6/26/03 86

88 Electronics - MK5 NX Controllers, Programmer and Battery Chargers After 6/26/03 Item Number Note Part Number Description Quantity Per Package 1 A NLA NLA - Controller, MK5 NX-LP B Controller, MK5 NX B E WARR RPLMT - Controller, MK5 NX Locknut (1/-20) NLA NLA - Screw, Phillips Pan Head Tap (#10-32 x 1") NLA NLA - Bracket, Controller Mounting with Decals, 1 1 Black Washer (1/ x 1/2 x 1/16") NLA NLA - Screw, Hex Head (1/-20 x 2") C NLA NLA - Controller Mounting Hardware NLA NLA - Decal, Blank X275 Fastener, Loop with Adhesive (1") F Charger, Battery with Power Cord 3 Amp, On-Board F E WARR RPLMT - Charger, Battery w/ Power Cord Amp, On-Board X005 Tie Wrap (11-1/2" L) P0870X000 Nut, Hex Keps (#-0) Screw, Phillips Pan Head (#-0 x 1/2") D NLA NLA - Charger, Battery with Hardware, On-Board (3 1 1 AMP) Cord, AC Power, 115VAC, 3 Prong On-Board (6' /2" L) Charger, Battery, 8 Amp, 115vac, Off Board 1 1 Dual Mode Round Plug, Lester 16 E Charger, Battery, 8 Amp. 115vac (Off Board) 1 1 Single Mode Round Plug w/ AC Power Line Cord 16 E E-NLA NLA - WARR RPLMT - Charger, Battery, 8 Amp, VAC (Off Board) Single Mode Round Plug w/ AC Power Line Cord 17 G NLA NLA - Cord, AC Power, 115VAC, 2 Prong Off-Board 1 1 (11' 6" L) Cord, AC Power, 115VAC, 3 Prong On-Board (6' /2" L) NLA NLA - Programmer, Remote 1 1 NOTE: A - M50 Models B - M51 Models C - Includes items 2-6. Does Not Include Controller. D - Includes items 8-13 E - CTE charger introduced on-chair as an optional choice /1/0. Used on Gel Cell or AGM (Absorbed Glass Mat) batteries. Serial number starts with 0A For wet cell batteries refer to the Lester 8 Amp. charger. F - On Board charger is included as a standard feature. G - No longer available as a service part. Please use as its replacement. 87

89 Quad Link Before /07/06 88

90 Item Number Note Part Number Description Quad Link Before /07/06 Quantity Per Package 1 A NLA - Kit, Quad Link - Right 1 1 For Van Seats 2 NLA - Ball Plunger with Lock Washer Locknut (#10-32) 1 2 NLA - Screw, Cap, Socket Head (#10-32 x 1/2") 1 5 NLA - Bushing, Bronze (3/16 x 1/ x 1/") 1 6 Screw, Phillips Pan Head (#10-32 x 1-1/8") 1 7 Spacer, Joystick Tube, Black NLA - Stud Plate, Quad Link Screw, Hex Head (1/-20 x 1-1/2") NLA - Spacer (1/ x 7/16 x 5/8") Locknut (1/-20) B NLA - Kit, Quad Link - Right 1 1 For Van Seats 2 NLA - Ball Plunger with Lock Washer Locknut (#10-32) 1 2 NLA - Screw, Cap, Socket Head (#10-32 x 1/2") 1 5 NLA - Bushing, Bronze (3/16 x 1/ x 1/") 1 6 Screw, Phillips Pan Head (#10-32 x 1-1/8") 1 7 Spacer, Joystick Tube, Black NLA - Stud Plate, Quad Link NLA - Screw, Hex Head (1/-20 x 1-3/") Spacer (1/ x 3/8 x 1") Locknut (1/-20) B NLA - Kit, Quad Link - Left 1 1 For Van Seats 2 NLA - Ball Plunger with Lock Washer Locknut (#10-32) 1 2 NLA - Screw, Cap, Socket Head (#10-32 x 1/2") 1 5 NLA - Bushing, Bronze (3/16 x 1/ x 1/") 1 6 Screw, Phillips Pan Head (#10-32 x 1-1/8") 1 7 Spacer, Joystick Tube, Black NLA - Stud Plate, Quad Link NLA - Screw, Hex Head (1/-20 x 1-3/") Spacer (1/ x 3/8 x 1") Locknut (1/-20) NLA NLA - Ball Plunger with Lock Washer 2 1 NOTE: A - Includes the Quad Link, items 2-11 and used for Van Seats before 9/1/02. For left side mounted Quad link, order as a special B - Includes the Quad Link, items 2-11 and used for Van Seats after 8/31/02 89

91 Quad Link (QL) After /06/06 When converting an old style Quad Link that attaches to a mounting plate is currently on the chair then order the following for Van Seat; Quad Link Mtg. Hdwr. (item 12), Quad Link (item 1) & Joystick Tube Clamp (item 1) NOTE: Substitute (item ) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently on the chair. 90

92 Quad Link (QL) After /06/06 When converting an old style Quad Link that attaches to a mounting plate is currently on the chair then order the following for Van Seat; Quad Link Mtg. Hdwr. (item 12), Quad Link (item 1) & Joystick Tube Clamp (item 1) NOTE: Substitute (item ) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently on the chair. Item Number Note Part Number Description Quantity Per Package Quad Link (QL) with Instruction Sheet - Right Quad Link (QL) with Instruction Sheet - Left A Kit, Quad Link Latch Hardware B 1102-NLA NLA - Kit, Quad Link Screw Fastener Hardware 1 1 C,E,E Kit, Quad Link Mounting Hardware - Van Seat Plug Button, Black (7/8") Locknut (1/-20) Tube, Joystick Offset (2") Tie Wrap (11-1/2" L) Spacer (1/ x 3/8 x 1") Screw, Hex Head (1/-20 x 1-5/8") Screw, Phillips Pan Head (#10-32 x 1-1/8") Spacer, Joystick Tube, Black Screw, Phillips Pan Head w/ Patch (#10-32 x 3/") Clamp, Fixed Height, Captain/ Van Seat 1 1 D 1138 Instruction Sheet, Quad Link 1 1 NOTE: A - Latch Kit includes ea. Button Head Cap Screws (10-32 x 3/8"), 2 ea. Latch Spring, ea. Phillips Flat C'Sunk Head Screws, 2 ea. Spring Catch Plates, 2 ea. Socket Head Set Screws (10-32 x 3/8") B - Screw Fastener Kit includes ea. Socket Head Shoulder Screws (3/8 x 3/8"), 2 ea. Socket Head Cap Screws (1/-20 x 3/8"), 2 ea. Socket Head Set Screws (1/-20 x 1/2"), ea. Socket Head Set Screws (10-32 x 1/8") C - Includes items 5-13 D - Not Shown E - If Quad Link is to be mounted on chairs w/ van seats built Before /07/06, then a new Upper Arm Asbly. (adj. height) or complete Fixed Height Arm Asbly. must be ordered as well. See van seat arms category. E1 - The new Arm Pads have 3 additional holes drilled in the armrest plate so that the quad link can be properly mounted. 91

93 Walker Holder Item Number Note Part Number Description Quantity Per Package Plug Button, Square, Black (1-1/8") Strap, Black Screw w/ Washer (#10 x 7/8") NLA NLA - Pad, Non-Skid Adhesive Back A P770 Walker Holder NLA NLA - Knob, Adjustment, Black (5/16-18 x 1-1/2") 1 1 B Bag, Poly (39" L x 33" W) 1 1 B,C NLA NLA - Instruction Sheet, Walker Holder 1 1 B NLA NLA - Carton 1 1 NOTE: A - Tighten knob assembly comes standard on-chair for all models. B - Not Shown. C - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 92

94 Oxygen Holder (For Fold Down Medium Back Van Seat) Item Number Note Part Number Description Quantity Per Package 1 A Oxygen Holder Bag, Poly (39" L x 33" W) Plug Button, Black (5/8") Knob, Clamping, Black NLA NLA - Package, Protective Cap Pad, Non-Skid Adhesive Back NLA NLA - Carton, Shipper NLA NLA - Instruction Sheet, Oxygen Holder Decal, Oxygen Warning - English NLA NLA - Decal, Oxygen Warning - French Canadian NLA NLA - Decal, Oxygen Warning - Domestic Spanish B NLA NLA - Knob, Adjustment, Black (5/16-18 x 1-1/2") 1 1 NOTE: A - Includes items 2-9. B - Tighten knob assembly comes standard on-chair for all models. 93

95 Oxygen Holder Before /15/03 For Semi-Recline Van Seat Item Number Note Part Number Description Quantity Per Package 1 A NLA NLA - Pin, Oxygen Holder Plug Button, Black (5/8") Decal, Oxygen Warning - English Knob, Clamping, Black NLA NLA - Package, Protective Cap NLA NLA - Pad, Non-Skid NLA NLA - Strap and Buckle NLA NLA - Carton, Shipper, Oxygen Holder Bag, Poly (39" L x 33" W) NLA NLA - Instruction Sheet, Oxygen Holder B,C NLA NLA - Oxygen Holder with Instruction Sheet 1 1 NOTE: A - Oxygen holder pins are to be used when backrest is absent. B - Includes items 1-10 C - Due to product improvement, see oxygen holder assemblies dated after /1/03 that will accommodate both (exposed and non-exposed) captain seat hinge assemblies. Special orders are no longer needed for exposed hinge assembly models. 9

96 Oxygen Holder After /1/03 For Semi Recline Van Seat 95

97 Oxygen Holder After /1/03 For Semi Recline Van Seat Item Number Note Part Number Description Quantity Per Package 1 A Oxygen Holder (D or E Tanks) NLA NLA - Pad, Non-Skid Decal, Oxygen Warning - English Spring, Oxygen Holder NLA NLA - Screw, Socket Button Head (#10-32 x 1/2") Locknut (#10-32) B NLA NLA - Instruction Sheet, Oxygen Holder NLA NLA - Bag, Poly (26" L x 15" W) Carton A HFO2-ML6 Oxygen Holder (Home Filled Tank) 1 1 NOTE: A - Includes Oxygen Holder plus items 2-9. For seats with an EXTERNAL (visible) hinge assembly. B - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 96

98 Miscellaneous Accessories THE PRODUCTION OF THE P725 IS CURRENTLY SUSPENDED. CONTACT CUSTOMER SERVICE FOR ORDERING OPTIONS. Item Number Note Part Number Description NOTE: Quantity Per Package A,F,I P725 Kit, Crutch/Cane Holder 1 1 Holder, Crutch/Cane - P Cup, Crutch/Cane Holder, Black 1 1 Strap, Hook and Loop - P Plug Button, Black (7/8") 1 1 Screw w/ Washer (#10 x 7/8") 1 2 F Heel Loop (Pair) 2 1 F Heel Loop - Right/Left 1 1 B,C,F Kit, Heel Loop Attaching Hardware (Pair) 2 1 D,E,F Kit, Heel Loop Attaching Hardware (Pair) 2 1 F NLA NLA - Knob, Adjustment, Black (5/16-18 x 1-1/2") 1 1 F,H NLA NLA - Strap, Positioning, Seat/Chest w/ Auto Style 1 1 Push Button Buckle (Eyelet to Eyelet Length 69") F,G Strap, Positioning, Seat/Chest w/ Auto Style Push 1 1 Button Buckle (Eyelet to Eyelet Length 61") F 0176X010 Pump, Tire 1 1 A - Tighten knob assembly part number comes standard on-chair for all models B Aluminum Footplate C - Consists of: 2 ea. Screw, Phillips Head (1/-20 x 2-1/") 2 ea. Spacer (1/ x 11/32 x 1-3/") 2 ea. Locknut (1/-20) D - Consists of: 2 ea. Screw, Phillips Head (1/-20 x 2-1/") 2 ea. Spacer (1/ x 11/32 x 1-3/") 2 ea. Hex Nut w/ Nylon Cap, and 2 ea. Flat Washer (1/ x 3/ x 3/32"). E Composite Footplate F - Not Shown G - 18" Wide Van Seat H - 20" Wide Van Seat I - THE PRODUCTION OF THE P725 IS CURRENTLY SUSPENDED. CONTACT CUSTOMER SERVICE FOR ORDERING OPTIONS. 97

99 Power Wheelchair Tool Kit 98

100 Item Number Note Part Number Description NLA Power Wheelchair Tool Kit NLA - Kit, Power Wheelchair Tool Includes: 1 ea. Multimeter with Leads 1 ea. Locator, Protractor/Angle Magnetic Base 1 ea. Instructions, MKIV Programmer 1 ea. Wire, Grounding with Hand Strap and Clip 1 ea. Leads, 1" Test 1 ea. Light, Pen with Invacare Logo 1 ea. Tape Measure, Compact with Invacare Logo 1 ea. Screwdriver, Pen-Size Phillips/Flat Head 1 ea. Cable, Virtual Service Charger/Modem Quantity Per Package

101 Warranty Replacement Parts NOTE: Part Number Description Quantity per E-NLA See Note(s) A WARR RPLMT - Controller, MKIV RII E WARR RPLMT - Charger, Battery w/ See Note(s) B Power Cord 3 Amp, On-Board 1 WARR RPLMT - Charger, Battery, E-NLA Amp. 115vac (Off Board) Single Mode Round Plug w/ AC 1 See Note(s) B, A Power Line Cord, CTE Corp E-NLA WARR RPLMT - Motor and Gearbox See Note(s) C - Right E-NLA WARR RPLMT - Motor and Gearbox See Note(s) C - Left E See Note(s) D WARR RPLMT - Controller, MK5 NX 1 A - See Category "Electronics - MKIV Controller - Programmer & Battery Chargers (Before 6/27/03)" for additional information. B - See Category "Electronics - MK5 NX Controllers - Programmer & Battery Chargers (After 6/26/03)" for additional information. C - See Category "Motor, Gearbox and Drive Wheel" for additional information. D - See Category "Electronics - MK5 NX Controllers - Programmer & Battery Chargers (After 6/26/03)" for additional information. 100

102 Invacare Corporation One Invacare Way Elyria, Oh USA Technical Support Customer Service Customer Service Invacare Corporation. All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by and. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted. (Revised 8/30/18)