Parts Catalog Issued: Apr 11, Crossfire T6A. Wheelchair

Transcription

1 Parts Catalog Issued: Apr, 208 Crossfire T6A Wheelchair

2 Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If you have any questions regarding this catalog, please contact one of our Customer Service Representatives. SYMBOL DEFINITION For Customer Service Support Call: For Faxed In Orders Call: or For Technical Service Call: Literature Can Be Found at: or Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the bottom of the page or below specified charts. Examples: A,B,C etc. NOTE: NLA = Special Comments = General information pertaining to that specific page = No Longer Available HARDWARE MEASUREMENTS The measurements for the hardware will be listed as follows: Screws, Bolts Diameter X Thread Count/Pitch X Length Washers Inside Diameter X Outside Diameter X Thickness Spacers Inside Diameter X Outside Diameter X Length For your convenience, we have supplied an area for you to list your Invacare Representatives. Name Phone Numbers 208 Invacare Corporation, Elyria, Ohio. Invacare, the Medallion Design and Yes, you can. are registered trademarks of the Invacare Corporation. Frog Legs is a registered trademark of Frog Legs, Inc. Information is subject to change without notification.

3 TABLE of CONTENTS Description Page Number Accessories - Miscellaneous Anti-Tipper Assembly Arm - T-Arm & Swingaway... 8 Axles & Camber System Backrest Mounting Hardware... 5 Canes - Back - w/ Push Handle Assemblies Canes - Back - w/o Push Handle Casters - Front and Mounting Hardware... 4 Clothing Guard - Fold In Style Side Guard Clothing Guard - Removable Side Guard... 2 Forks & Hardware Forks & Hardware - Frog Legs - One Sided Fork (FLOSF) Frame Finishes & Touch-Up Paint... 4 Frame Hardware - Active... Frame Hardware - Extended... 3 Frames - Base, Seat & Backrest... 6 Front Riggings - Footrest and Hardware Handrims & Handrim Hardware Handrims & Handrim Hardware - Natural Fit & Natural Fit LT... 5 Literature... 5 Upholstery - Back

4 TABLE of CONTENTS Description Page Number Upholstery - Seat Wheel Locks & Attaching Hardware Wheels - Rear

5 Frames Finishes & Touch-Up Paint Contemporary Color Numbers Touch-Up Paint (.6 oz.) Color 5P 3337-NLA Black Prism 05P 0326-NLA Midnight Blue 60P 038-NLA Silver Metallic 7P Silver Vein 24P NLA Wet Black 29P NLA White Snow Too Hot Color Numbers Touch-Up Paint (.6 oz.) Color 9P NLA Bubblegum Pink 6P NLA Electric Red 8P NLA Fruit Fusion 20P NLA Grape Madness 6P NLA Sunkissed Orange 30P Sunny Yellow 7P NLA Tangerine Red Way Cool Color Numbers Touch-Up Paint (.6 oz.) Color 23P NLA Celestial Purple 22P NLA Cosmic Blue 62P NLA Electric Blue 04P 036-NLA Electric Teal 25P 3338-NLA Emerald Green 2P NLA Lolly Pop Blue 26P NLA Shamrock Green 27P NLA Grasshopper Green 24P NLA Vivid Violet 4

6 Item Number Note Part Number Description Literature Quantity Per Package Assembly NLA NLA - Owners Manual 5

7 Base, Seat and Backrest Frames NOTE: Please call Customer Service when ordering replacement frames. These frames are no longer available through the special order process and will no longer be replaced. 6

8 Base, Seat and Backrest Frames NOTE: Please call Customer Service when ordering replacement frames. These frames are no longer available through the special order process and will no longer be replaced. # Base Frames Please call Customer Service when ordering replacement frames. These frames are no longer available through the special order process NOTE: Frame Style CRF - Active CRF3 - Extended CRF Active - Canadian CRF3 - Extended - Canadian A - Specify frame color when ordering, see category titled, "Frame Finishes." Part Number NLA See Note(s) A See Note(s) A NLA NLA #2 Seat Frames (Before /2/) 4" Deep 5" Deep 6" Deep 7" Deep 8" Deep 9" Deep 20" Deep 2" Width NLA 3" Width NLA 4" Width NLA NLA NLA NLA NLA 5" Width NLA NLA NLA NLA NLA 6" Width NLA NLA NLA NLA NLA NLA 7" Width NLA NLA NLA NLA NLA NLA 8" Width NLA NLA NLA NLA NLA NLA NLA 9" Width NLA NLA NLA NLA NLA 20" Width NLA NLA NLA NLA NLA Specify frame color when ordering, see category titled, "Frame Finishes." These Frames are No Longer Available, please see Chart labeled "#2 Seat Frames (After //2) to order Frame parts. 7

9 Base, Seat and Backrest Frames NOTE: Please call Customer Service when ordering replacement frames. These frames are no longer available through the special order process and will no longer be replaced. #2 Seat Frames (After //) Seat Depth 4" Deep 5" Deep 6" Deep 7" Deep 2" Width " Width " Width " Width " Width " Width " Width " Width " Width Specify frame color when ordering, see category titled, "Frame Finishes." 8" Deep " Deep " Deep #3 Backrest Frames - 0-4" H (Before 5/22/09) For Chairs with Integral Bolt Through Push Handles (CRF97) Height 0-4" H 2" W " W " W " W " W " W " W " W " W Specify Frame color when ordering, see Category titled, "Frame Finishes" for list of available colors. 8

10 Base, Seat and Backrest Frames NOTE: Please call Customer Service when ordering replacement frames. These frames are no longer available through the special order process and will no longer be replaced. #3 Backrest Frames - All Heights (After 5/2/09 - Before 6/4/202) For Chairs with Integral Bolt Through Push Handles (CRF97) Height 8 - " H 2" W " W " W " W " W " W " W " W " W Specify Frame color when ordering, see Category titled, "Frame Finishes" for list of available colors. 0-4" H, 2-6" H 4-8" H, 6-20" H #3 Backrest Frames - All Heights (After 6/3/202) For Chairs w/ Integral Bolt Through Push Handles (CRF97) Height 8 - " H 0-4" H 2-6" H 4-8" H 6-20" H 2" W " W " W " W " W " W " W " W " W Specify Frame color when ordering, see Category titled, "Frame Finishes" for list of available colors. 9

11 Base, Seat and Backrest Frames NOTE: Please call Customer Service when ordering replacement frames. These frames are no longer available through the special order process and will no longer be replaced. #3 Backrest Frames - All Heights For Chairs with or without Integral Bolt Through Push Handles (CRF97) Height 8 - " H 0-4" H 2-6" H 4-8" H 6-20" H 2" W " W " W " W " W " W " W " W " W Specify Frame color when ordering, see Category titled, "Frame Finishes" for list of available colors. 0

12 Frame Hardware - Active

13 Item Number Note Part Number Description Frame Hardware - Active Quantity Per Package Assembly A Hardware, Frame, Active 2 Clamp, Tube Camber 2 3 Screw, Socket Head (/4-28 x 7/8") 0 4 Washer, Steel (/4 x 5/8 x 3/32") 4 5 Spacer, Flanged, Black 2 6 Clamp, Tube, Footrest 2 7 Screw, Socket Head (/2-20 x 2-/2") 2 8 Locknut (/2-20) 2 9 Plug Button, Black (") 2 0 Washer (/4 x /2 x /40) 2 Locknut (/4-28) 6 2 Screw (/4-28 x -7/8") 2 4 B Camber Tube Assembly, Color, 0 Degree 2 4 B Camber Tube Assembly, Color, 3 Degree 2 4 B Camber Tube Assembly, Color, 6 Degree 2 4 B Camber Tube Assembly, Color, 9 Degree 2 5 See Chart #5 Crescent Links 2 NOTE: A - Includes items 2 thru 2. B - Specify frame color when ordering, see category titled, "Frame Finishes." Quote number SM must be referenced when a new Camber Tube Assembly is ordered #5 Crescent Links Rear Seat to Floor Height Black Silver Blue Red 4-4-/2 " " " " When ordering a replacement anodized part, the customized anodized finish may appear slightly different. This subtle difference contributes to its uniqueness. If a more uniformed appearance is desired, order these parts in pairs. 2

14 Frame Hardware - Extended 3

15 Item Number Note Part Number Description Frame Hardware - Extended Quantity Per Package Assembly A 5977 Hardware, Frame, Extended 2 Clamp, Tube Camber 2 3 Screw, Socket Head (/4-28 x 7/8") 0 4 Washer, Steel (/4 x 5/8 x 3/32") 4 5 Spacer, Flanged, Black 2 6 Clamp, Tube, Footrest 2 7 Screw, Socket Head (/2-20 x 2-/2") 2 8 Locknut (/2-20) 2 9 Plug Button, Black (") 2 0 Washer (/4 x /2 x /40) 2 Locknut (/4-28) 6 2 Screw (/4-28 x -7/8") 2 3 Button, Plug (/4) 4 4 Spacer, Coved (/4 x 3/6 x 9/6) 2 5 Bumper, Clamp Camber 2 6 B Camber Tube Assembly, Color, 0 Degree 2 6 B Camber Tube Assembly, Color, 3 Degree 2 6 B Camber Tube Assembly, Color, 6 Degree 2 6 B Camber Tube Assembly, Color, 9 Degree 2 7 See Chart #7 Crescent Links 2 NOTE: A - Includes items 2-5. B - Specify frame color when ordering, see category titled, "Frame Finishes." Quote number must be referenced when a new Camber Tube Assembly is ordered #7 Crescent Links Rear Seat to Floor Height Black Silver Blue Red 4-4-/2 " " " " When ordering a replacement anodized part, the customized anodized finish may appear slightly different. This subtle difference contributes to its uniqueness. If a more uniformed appearance is desired, order these parts in pairs. 4

16 Backrest Mounting Hardware 5

17 Item Number Note Part Number Description A B,E E 22 E 23 D 23 D 23 D Backrest Mounting Hardware Quantity Per Package Assembly 5975-NLA NLA - Hardware, Backrest Screw, Socket, Button Head w/ Patch (0-32 x /4") 2 Square, Adjustment 2 Screw, Socket, Flat Head, (/4-28 x -3/4") 4 Spacer, Coved (/4 x x 9/6") 4 Spacer, Coved (3/4 x x /2") 2 Screw, Socket Button Head (5/6-24 x -3/4") 2 Locknut (/4-28) 4 NLA - Washer, Steel (/4 x /2 x 3/64") 2 Washer, Steel (2/64 x 5/8 x 3/64") 2 Locknut (5/6-24) 2 Insert, Cane, Rear, Black 2 Nut, Hex, Jam (/4-28) 2 Screw, Hex (/4-28 x -/4") 2 Screw, Socket Head (/4-28 x 7/8") 2 Washer, Nylon (5/6 x 7/32 x /32") NLA NLA - Hardware, Backest Screw, Socket, Button Head w/ Patch (0-32 x /4") 2 Square, Adjustment 2 Screw, Socket, Flat Head, (/4-28 x -3/4") 4 Spacer, Coved (/4 x x 9/6") 4 Spacer, Coved (3/4 x x /2") 2 Screw, Socket Button Head (5/6-24 x -3/4") 2 Locknut (/4-28) 4 NLA - Washer, Steel (/4 x /2 x 3/64") 2 Washer, Steel (2/64 x 5/8 x 3/64") 2 Locknut (5/6-24) 2 Insert, Cane, Rear, Black 2 Nut, Hex, Jam (/4-28) 2 Screw, Hex (/4-28 x -/4") 2 Screw, Socket Head (/4-28 x 7/8") 2 Washer, Nylon (5/6 x 7/32 x /32") 2 Socket, Half Arm - Right Socket, Half Arm - Left Screw, Hex (/4-28 x -/2") 4 Screw, Hex (/4-28 x -3/4") 2 Sleeve, Bearing 2 NLA - Swingaway Arm Mounting Assembly - Right NLA - Swingaway Arm Mounting Assembly - Left NLA NLA - Swingaway Arm Mounting Assembly - Right NLA NLA - Swingaway Arm Mounting Assembly - Left Cord, Back Release (2" W) Cord, Back Release (3" W) Cord, Back Release (4" W) 6

18 Item Number Note Part Number Description Backrest Mounting Hardware Quantity Per Package Assembly 23 D Cord, Back Release (5" W) 23 D Cord, Back Release (6" W) 23 D Cord, Back Release (7" W) 23 D Cord, Back Release (8" W) 23 D Cord, Back Release (9" W) 23 D Cord, Back Release (20" W) Bracket, Back, Black - Right Bracket, Back, Black - Left Bracket, Back, Silver - Right Bracket, Back, Silver - Left Bracket, Back, Blue - Right Bracket, Back, Blue - Left Bracket, Back, Red - Right Bracket, Back, Red - Left 25 F Kit, Plunger Pin w/ Spring 26 Pin, Plunger 27 Spring, Pin, Plunger (/4 x 3/6 x.020) NOTE: A - For use on T-Arm or no arms. Includes items 2-6. B - For use on Swingaway Arms. Includes items D - The Back Release Cord includes the Split Ring on each end but DOES NOT INCLUDE the Plunger Pins or Springs. It is recommended when ordering a new Back Release Cord, Item 25 (Kit, Plunger Pin w/ Spring) be ordered also. E - Item 22 (Swingaway Arm Mounting Assembly) includes the Plunger Pin and Spring. F - Kit includes Items 26 and 27. 7

19 T-Arm & Swingaway 8

20 Item Number Note Part Number Description A B B C D T-Arm & Swingaway T Arm and Swingaway Quantity Per Package Assembly 6243 Kit, Armpad, Desk Length (Pair) (CNAD, TAD) Arm Pad, Desk Length 2 Screw, Socket Head, Torx (K50 x 30mm) Arm Assembly, Adjustable Height, T-Arm, Desk - Right Arm Pad, Desk Length Screw, Socket, Button Head (M5 x 35mm) 2 Plug Button, Black (3/4") 2 Screw, Socket Button Head (M6 x x 2mm) 3 Guard, Clothing - Right/Left NLA - Locknut (M6 x ) 5 Support, Armrest NLA - Screw, Socket Head (M6 x x.50mm) 2 Tube, Armrest - Right Arm Assembly, Adjustable Height, T-Arm, Desk - Left Arm Pad, Desk Length Screw, Socket, Button Head (M5 x 35mm) 2 Plug Button, Black (3/4") 2 Screw, Socket Button Head (M6 x x 2mm) 3 Guard, Clothing - Right/Left NLA - Locknut (M6 x ) 5 Support, Armrest NLA - Screw, Socket Head (M6 x x.50mm) 2 Tube, Armrest, Black - Left Half Arm Assembly, Black - Right Half Arm Assembly, Black - Left Grip, Foam Hand (9" L) Half Arm Tube - Right Half Arm Tube - Left 6242-NLA NLA - Kit, Swingaway Arm Conversion Sleeve, Bearing 2 Socket, Half Arm - Right Socket, Half Arm - Left NLA - Swingaway Arm Mounting Assembly - Left NLA - Swingaway Arm Mounting Assembly - Right Locknut (/4-28) 6 NLA - Washer, Steel (/4 x /2 x 3/64") 2 Screw, Hex (/4-28 x -3/4") 2 Screw, Hex (/4-28 x -/2") NLA NLA - Swingaway Arm Mounting Assembly - Right NLA NLA - Swingaway Arm Mounting Assembly - Left NLA Kit, Attaching Hardware, T-Arm 9

21 Item Number Note Part Number Description NOTE: T-Arm & Swingaway Quantity Per Package Assembly NLA - Locknut (M6 x ) 2 Support, Armrest Screw, Socket Head (M6 x 50) 2 A - Includes Items 2 and 3 B - Includes Items 2 and 3, Includes Items 5 thru C - Includes Items 7 thru 23 D - Includes items 8, 9, and

22 Clothing Guard - Removable Side Guard 2

23 Clothing Guard - Removable Side Guard Item Number Note Part Number Description Quantity Per Package Assembly See Chart # Clothing Guard w/ Fender and No Quad Hole 2 See Chart #2 Clothing Guard w/ Quad Hole and No Fender 3 See Chart #3 Clothing Guard w/o Quad Hole and No Fender 4 A Kit, Side Guard Hardware (Pair) Clamp, Half, Threaded Clamp, Half, Non-Threaded Washer, Nylon (/4 x 7/6 x 5/64") Screw, Socket Head (/4-20 x -/4") 2 NOTE: A - Includes items 4-7. Rigid Clothing guard sizes (Small 6" deep chairs - 7 or deeper larger sizes) # Clothing Guard w/ Fender and No Quad Hole Model Guard 22 and 24" Wheels 25 and 26" Wheels CRF79 Right Side CRF79 Left Side #2 Clothing Guard w/ Quad Hole and No Fender Model Guard 22 and 24" Wheels 25 and 26" Wheels CRF8 Right Side CRF8 Left Side #3 Clothing Guard w/o Quad Hole and No Fender Model Guard 22 and 24" Wheels 25 and 26" Wheels CRF9 Right Side CRF9 Left Side

24 Clothing Guard - Fold In Style Side Guard 23

25 Clothing Guard - Fold In Style Side Guard Item Number Note Part Number Description A A B B Quantity Per Package Assembly Kit, Guard, Side, Folding, Aluminum, Black - Small Clamp, Wedge Clamp, Wedge NLA - Screw, Socket Head (/4-28 x -/2") NLA - Bracket, Swing Side Guard w/ Edge Trim Assembly, Folding, Aluminum, Black - Small Spacer (/4 x x 7/64") Locknut (/4-28) NLA - Screw, Socket, Button Head (/4-28 x 3/4") 6055 Kit, Guard, Side, Folding, Aluminum, Black - Large Clamp, Wedge Clamp, Wedge NLA - Screw, Socket Head (/4-28 x -/2") NLA - Bracket, Swing Side Guard w/ Edge Trim Assembly, Folding, Aluminum, Black - Large Spacer (/4 x x 7/64") Locknut (/4-28) NLA - Screw, Socket, Button Head (/4-28 x 3/4") Kit, Guard, Side, Folding, Carbon Fiber, Black - Small Clamp, Wedge Clamp, Wedge NLA - Screw, Socket Head (/4-28 x -/2") NLA - Bracket, Swing Side Guard w/ Edge Trim Assembly, Folding, Carbon Fiber, Black - Small Spacer (/4 x x 7/64") Locknut (/4-28) NLA - Screw, Socket, Button Head (/4-28 x 3/4") Washer (/4 x /2 x /40) Kit, Guard, Side, Folding, Carbon Fiber, Black - Large Clamp, Wedge Clamp, Wedge NLA - Screw, Socket Head (/4-28 x -/2") NLA - Bracket, Swing Side Guard w/ Edge Trim Assembly, Folding, Carbon Fiber, Black - Large Spacer (/4 x x 7/64") Locknut (/4-28) NLA - Screw, Socket, Button Head (/4-28 x 3/4") Washer (/4 x /2 x /40) 6980 Side Guard w/ Edge Trim Assembly, Folding, Aluminum, Black - Small 24

26 Clothing Guard - Fold In Style Side Guard Item Number Note Part Number Description NOTE: 698 Side Guard w/ Edge Trim Assembly, Folding, Aluminum, Black - Large 6982 Side Guard w/ Edge Trim Assembly, Folding, Carbon Fiber, Black - Small 6983 Side Guard w/ Edge Trim Assembly, Folding, Carbon Fiber, Black - Large A - Includes items 2-9. B - Includes items 2-0. Quantity Per Package Assembly 25

27 Back Upholstery For Back Frames see Category "Frames - Base, Seat, and Backrest" for more information. 26

28 Back Upholstery For Back Frames see Category "Frames - Base, Seat, and Backrest" for more information. Item Number Note Part Number Description NOTE: Quantity Per Package Assembly See Chart # Cover - Fold Over Ballistic Nylon Back See Chart #2 Cover - Ballistic Nylon Adjustable Tension Back See Chart #2 Cover - Breathable Mesh Adjustable Tension Back See Chart #3 Back Anchor - Adjustable Tension Back See Chart #3 Back Anchor - Adjustable Tension Back - For Bolt Through Integral Push Handle See Chart #4 Back Adjuster - Adjustable Tension Back See Chart #4 Back Adjuster - Adjustable Tension Back - For Bolt Through Integral Push Handle See Chart #5 Lumbar Support Strap - Adjustable Tension Back A,B NLA NLA - Instruction Sheet, Adjustable Tension Back Upholstery A - Not Shown B - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. # Cover - Fold Over Ballistic Nylon Back 2" Wide 3" Wide 4" Wide 5" Wide 6" Wide 7" Wide 8" Wide 9" Wide 20" Wide 8 - " High 0-4" High 2-6" High 4-8" High 6-20" High #2 Cover - Ballistic Nylon Adjustable Tension Back NOTE: Adjustable Tension Back Assembly numbers are not available. Back Assembly components must be ordered individually. Order item numbers 2, 3, 4, 5 and Instruction Sheet 2" Wide 3" Wide 4" Wide 5" Wide 6" Wide 7" Wide 8" Wide 8 - " High 0-4" High 2-6" High 4-8" High 6-20" High

29 Back Upholstery For Back Frames see Category "Frames - Base, Seat, and Backrest" for more information. #2 Cover - Ballistic Nylon Adjustable Tension Back NOTE: Adjustable Tension Back Assembly numbers are not available. Back Assembly components must be ordered individually. Order item numbers 2, 3, 4, 5 and Instruction Sheet 8 - " High 0-4" High 2-6" High 4-8" High 6-20" High 9" Wide 20" Wide

30 Back Upholstery For Back Frames see Category "Frames - Base, Seat, and Backrest" for more information. #2 Cover - Breathable Mesh Adjustable Tension Back NOTE: Adjustable Tension Back Assembly numbers are not available. Back Assembly components must be ordered individually. Order item numbers 2, 3, 4, 5 and Instruction Sheet 2" Wide 3" Wide 4" Wide 5" Wide 6" Wide 7" Wide 8" Wide 9" Wide 20" Wide 8 - " High 0-4" High 2-6" High 4-8" High 6-20" High #3 Back Anchor - Adjustable Tension Back 8 - " High 0-4" High 2-6" High 4-8" High 6-20" High 2-7" Wide " Wide

31 Back Upholstery For Back Frames see Category "Frames - Base, Seat, and Backrest" for more information. #3 Back Anchor - Adjustable Tension Back - For Bolt Through Integral Push Handle 8 - " High 0-4" High 2-6" High 4-8" High 6-20" High 2-7" Wide " Wide #4 Back Adjuster - Adjustable Tension Back 2" Wide 3" Wide 4" Wide 5" Wide 6" Wide 7" Wide 8" Wide 9" Wide 20" Wide 8 - " High 0-4" High 2-6" High 4-8" High 6-20" High

32 Back Upholstery For Back Frames see Category "Frames - Base, Seat, and Backrest" for more information. #4 Back Adjuster - Adjustable Tension Back - For Bolt Through Integral Push Handle 2" Wide 3" Wide 4" Wide 5" Wide 6" Wide 7" Wide 8" Wide 9" Wide 20" Wide 8 - " High 0-4" High 2-6" High 4-8" High 6-20" High #5 Lumbar Support Strap - Adjustable Tension Back Chair Width 2" Wide 3" Wide 4" Wide 5" Wide 6" Wide 7" Wide 8" Wide 9" Wide 20" Wide Part Number

33 Seat Upholstery Seat Upholstery (Before /2/) 4" Deep 5" Deep 6" Deep 7" Deep 8" Deep 9" Deep 20" Deep 2" Wide NLA 3" Wide NLA 4" Wide NLA NLA NLA NLA NLA 5" Wide NLA NLA 5967-NLA NLA NLA 6" Wide NLA NLA NLA NLA NLA NLA 7" Wide NLA 5968-NLA NLA NLA NLA NLA NLA 8" Wide NLA NLA NLA NLA NLA 5969-NLA NLA 9" Wide NLA NLA NLA NLA NLA 20" Wide NLA NLA NLA NLA NLA The above Seat Upholstery is No Longer Available, please see "See Upholstery (After //) for replacement parts. Seat Upholstery (After //) 2" Wide 3" Wide 4" Wide 5" Wide 6" Wide 7" Wide 8" Wide 9" Wide 20" Wide 4" Deep 5" Deep 6" Deep 7" Deep 8" Deep " Deep 20" Deep

34 Seat Upholstery Seat Upholstery Hardware Part Number Description Hardware, Seat Upholstery (4" D) Hardware, Seat Upholstery (5-6" D) Hardware, Seat Upholstery (7-8" D) Hardware, Seat Upholstery (9-20" D) 33

35 Back Canes w/o Push Handles (LKDWN-Standard) Lock-Down, Folding Height/Angle Adjustable Back When changing back heights you also need to change the backrest and the back upholstery. Item Number Note Part Number Description Quantity Per Package Assembly A,B Back Canes, Adjustable w/o Push Handle (8-" H) 2 Plug Button, Black (3/4") 2 3 NLA - Tube, Insert, Adjustable Back (8 - " H) 2 4 Spring, Torsion w/ Button 2 5 Bushing, Pivot 2 A,C Back Canes, Adjustable w/o Push Handle (0-4"/6-20" H) 2 Plug Button, Black (3/4") 2 3 NLA - Tube, Insert, Adjustable Back (0-20" H) 2 4 Spring, Torsion w/ Button 2 5 Bushing, Pivot 2 NOTE: A - Includes items 2-5 B - 8-" High Backs C - 0-4", 2-6", 4-8", and 6-20" High Backs 34

36 Back Canes w/ Push Handle Assemblies When changing back heights you also need to change the backrest and the back upholstery. 35

37 Back Canes w/ Push Handle Assemblies When changing back heights you also need to change the backrest and the back upholstery. Item Number Note Part Number Description A B C C C,G C,H Quantity Per Package Assembly 6587 Kit, Push Handle Assembly w/ Hardware, Adjustable Height (Pair) Clamp, Push Handle - Right Clamp, Push Handle - Left Spring, Torsion w/ Button 2 Tube, Push Handle 2 Grip, Foam (8") 2 Lever 2 Washer (/4 x /2 x /6") 2 Screw, Socket Head (/4-20 X 3/4") 4 Lockwasher, High Collar, Split (/4") Push Handle Assembly w/ Hardware, Bolt On (Pair) Handle, Push, Black - Right Handle, Push, Black - Left 0322 Clamp, Threaded, Top Clamp, Non-Threaded, Bottom Plug Button, Black (3/4") Grip, Foam, Black (5") NLA NLA - Screw, Set Flat Point (/4-20 x ") NLA NLA - Screw, Hex Head (/4-20 x ") Cane, Back, Straight w/ Push Handle and Hardware (0-4" H) Grip, Foam (8") Plug Button, Black (3/4") NLA - Back Cane w/ Push Handle, Straight (0-4" H) Screw, Socket Button Head (/4-20 x -/4") Locknut (/4-20) Cane, Back, Straight w/ Push Handle and Hardware (2-6" H) Grip, Foam (8") Plug Button, Black (3/4") NLA - Back Cane w/ Push Handle, Straight (2-6" H) Screw, Socket Button Head (/4-20 x -/4") Locknut (/4-20) Cane, Back, Straight w/ Push Handle and Hardware (2-6" and 4-8" H) Grip, Foam (8") NLA - Cane, Back, Straight, Black - Right/Left Screw w/ Washer (#0 x 7/8") Screw, Socket Button Head (/4-20 x -/4") Locknut (/4-20) Back Cane w/ Hardware, Straight w/ Push Handle (4-8" and 6-20" H) 36

38 Back Canes w/ Push Handle Assemblies When changing back heights you also need to change the backrest and the back upholstery. Item Number Note Part Number Description Quantity Per Package Assembly 2 Grip, Foam (8") 22 NLA - Back Cane, Straight w/ Push Handle 24 Screw, Socket Button Head (/4-20 x -/4") 25 Locknut (/4-20) 26 D,E Kit, Push Handle Assembly w/ Hardware, Integral (Pair) (8-" H) 27 Screw, Socket Button Head (/4-20 x 7/8") 2 28 Bushing, Pivot 2 29 Back Cane Assembly, Integral 2 Package, Screw with Washer (#0 x 7/8") (Pair) 2 26 D,F Kit, Push Handle Assembly w/ Hardware, Integral (Pair) 27 Screw, Socket Button Head (/4-20 x 7/8") 2 28 Bushing, Pivot 2 29 Push Handle Assembly, Integral 2 Package, Screw with Washer (#0 x 7/8") (Pair) 2 J NLA NLA - Back Cane w/ Push Handle, Straight (0-4" 2 H) K NLA NLA - Back Cane w/ Push Handle, Straight (2-6" 2 H) L NLA NLA - Back Cane w/ Push Handle, Straight (4-8" 2 H) M NLA NLA - Back Cane w/ Push Handle, Straight (6-20" 2 H) N Grip, Foam (8") 2 N Plug Button, Black (3/4") 2 N Bushing, Pivot 2 N Screw, Socket Button Head (/4-20 x 7/8") 2 NOTE: A - Includes items 2-0. B - Includes items 8, 2-9. C - Before 6/0/09. Includes items Part number includes items 2, 22, 24 and 25. Quantities cover one side of chair only D - After 6/9/09. Includes items Upholstery Screw Package part # is not shown. E - Kit covers 8-" back heights F - Kit covers 0-4", 2-6", 4-8" and 6-20" back heights G - Crossfire T6A model covers 4-8" back heights H - Crossfire T6A model covers 6-20" back heights J - Not shown in illustration, used for 0-4" back heights for chairs manufactured before 6/4/202. (CRF97) K - Not shown in illustration, used for 2-6" back heights for chairs manufactured before 6/4/202. (CRF97) L - Not shown in illustration, used for 4-8" back heights for chairs manufactured before 6/4/202. (CRF97) M - Not shown in illustration, used for 6-20" back heights for chairs manufactured before 6/4/202. (CRF97) N - Not shown. Use for all chairs manufactured before 6/4/202. (CRF97) 37

39 Forks & Hardware 38

40 Item Number Note Part Number Description Forks & Hardware Quantity Per Package Assembly B Fork Assembly w/ Bearings, Black B Fork Assembly w/ Bearings, Silver B Fork Assembly w/ Bearings, Blue B Fork Assembly w/ Bearings, Red 2 407X02 Bearing (/2" I.D. x -/8" O.D.) 2 3 A NLA NLA - Fork Assembly, Shock Absorber (Pair) 2 NOTE: A - These forks are sold only in pairs. B - When ordering a replacement anodized part, the customized anodized finish may appear slightly different. This subtle difference contributes to its uniqueness. 39

41 Forks and Hardware, Frog Legs, One Sided Fork (FLOSF) Item Number Note Part Number Description A NLA NLA - Kit, Fork Assembly w/ Hardware, Frog Legs, One Sided Fork (Pair) NOTE: A - Individual Components are non-serviceable Quantity Per Package Assembly 2 40

42 Casters and Mounting Hardware 4

43 Item Number Note Part Number Description Casters and Mounting Hardware Quantity Per Package Assembly See Chart Caster Models Wheel Assembly, Soft Roll (3" x -/2") Wheel Assembly, Soft Roll (4" x ") 2807 Wheel Assembly, Soft Roll (5" x -/2") Wheel Assembly (3" x ") Wheel Assembly, Composite Urethane, Light Up (4" x ") Wheel Assembly, Semi-Pneumatic, Black (4" x ") 5 A 643 Wheel Assembly, Composite, Urethane (5" x ") Kit, Front Wheel Hardware Spacer (5/6 x 7/6) 2 Locknut (5/6-24) Screw, Hex Head (5/6-24 x 2-/4") NOTE: A - After 0/4/09, the 5SOFT (5") Semi-Pneumatic is no longer available and is replaced by the 5SOFT (5") Urethane (643). Order in pairs for chairs manufactured before 0/5/09. Caster Model Type Part Number 3SOFR Aluminum Soft Roll Casters CRFA654 Aluminum Soft Roll Casters CRFA655 Aluminum Soft Roll Casters 2807 CRFF3 Micro Casters CRF884 Lighted Front Wheel CRF654 Urethane Casters 442 CRF655 Urethane Casters

44 Footrest and Hardware 43

45 Footrest and Hardware For Footrest Accessories, refer to Miscellaneous Accessories category Item Number Note Part Number Description Quantity Per Package Assembly A Kit, Hardware, Footplate 2 Screw, Socket Flat Head (/4-28 x ") 2 3 Clamp, Footrest 4 Locknut (/4-28) 2 5 J Tube, Support, Footrest, Tapered, Black 2 5 J Tube, Support, Footrest, V Front, Black 2 6 B Footplate (6-/2" W) 6 C 4329 Footplate (7-/2" W) 6 D Footplate (8-/2" W) 6 E Footplate (9-/2" W) 6 F Footplate (0-/2" W) 7 I Kit, Footplate 2" Spacer Riser 8 Spacer (6/64 x 3/4 x 2") 2 9 Screw, Socket Flat Head (/4-28 x ") 2 0 NLA - Screw, Button Head Cap (/4-28 x 7/8") 2 G,J Footrest, Tubular w/ Holes, Black J Footrest, Tubular w/o Holes, Black H See Chart Tubular Footrest Covers NOTE: A - Includes items 2-4. B - For use on chairs 2-3" wide. C - For use on chairs 4-5" wide. D - For use on chairs 6-7" wide. E - For use on chairs 8-9" wide. F - For use on chairs 20" wide. G - Use with Tubular Footrest Cover options. See Chart H - Not shown. I - Includes items 8 - J - Order as a "special" order. Reference quote # when ordering. The Serial Number and chair width must be added to order for the replacement service part also. Tubular Footrest Covers Plastic Footrest Cover Carbon Fiber Footrest Cover 2-4" W 5" W 6" W 7" W 8" W " W 20" W

46 Axles & Camber System Axles Item Number Part Description Part Number Quick Release Titanium Axles Quad Release

47 Axles & Camber System NOTE: Item Number Description Part Number 3 Camber Tube Assembly, 0 Degree See Note(s) A 3 Camber Tube Assembly, 3 Degree See Note(s) A 3 Camber Tube Assembly, 6 Degree See Note(s) A 3 Camber Tube Assembly, 9 Degree See Note(s) A A - Specify frame color when ordering, see category titled, "Frame Finishes." Quote number SM must be referenced when a new Camber Tube Assembly is ordered 46

48 Rear Wheels Complete Rear Wheel Assembly Use the Configurator part # when a complete wheel assembly is requested. NOTE: Part Number Description Wheel Assembly includes wheel, tire and handrim. See Note(s) A A - ZERO-G 24", 25" and 26" Rear Wheels changed from silver to black spokes as of 2/9/2009. Order rear wheels in pairs to match for chairs manufactured before 2/9/2009 Tires Wheel Size Tire Style Tire Type Tire 22" CRFPR Primo " CRFPN Pneumatic " CRF23 Schwalbe 22" CRF73 Pneumatic w/ FF " CRF60 Knobby 22" CRF7G Solid No Flat - Gray 22" CRF7BK Solid No Flat - Black 22" CRF0R Kenda High Pressure - Red 22" CRF0Y Kenda High Pressure - Yellow 24" CRFPR Primo " CRFPN Pneumatic 4076X060 24" CRF23 Schwalbe " CRF7BK Solid No Flat - Black " CRF73 Pneumatic w/ FF 4076X060 24" CRF60 Knobby " CRF7G Solid No Flat - Gray " CRF0R Kenda High Pressure - Red " CRF0Y Kenda High Pressure - Yellow " CRFPR Primo " CRFPN Pneumatic 25" CRF23 Schwalbe " CRF73 Pneumatic w/ FF 25" CRF60 Knobby " CRF7G Solid No Flat - Gray " CRF0Y Kenda High Pressure - Yellow " CRF7BK Solid No Flat - Black " CRF0R Kenda High Pressure - Red " CRFPR Primo " CRFPN Pneumatic " CRF23 Schwalbe " CRF73 Pneumatic w/ FF 26" CRF60 Knobby 47

49 Rear Wheels Tires Wheel Size Tire Style Tire Type Tire 26" CRF7G Solid No Flat - Gray 26" CRF7BK Solid No Flat - Black 26" CRF0R Kenda High Pressure - Red 26" CRF0Y Kenda High Pressure - Yellow 48

50 Rear Wheels Inner Tubes 22-24" Wheels Wheel Style CRFPR CRFPN CRF23 CRF73 CRF60 CRF0R CRF0Y CRF22SP (22" Wheel) CRF6722 (22" Wheel) 0624-NLA ZEROG24 (24" Wheel) X CRF6724 FN624, SPLX24 (24" Wheel) X Inner Tubes 25-26" Wheels Wheel Style CRFPR CRFPN CRF23 ZEROG25 FN625 (25" Wheel) CRF73 CRF CRF0R CRF0Y NOTE: A - A 25" inner tube will be used on a 26" wheel. CRF6725 SPLX25 (25" Wheel) ZEROG26 FN626 (26" Wheel) See Note(s) A See Note(s) A See Note(s) A CRF " Wheel See Note(s) A See Note(s) A See Note(s) A 49

51 Handrims & Handrim Hardware BLKANHR Black Anodized Handrim CRF77 Hard Anodized Grey Handrim CRF75 Titanium Handrim CRF22SP (22" Wheel) CRF6722 (22" Spin) CRF6724 (24" Spin) CRF6725 (25" Spin) CRF6726 (25" Spin) NLA ZEROG24 (24" Wheel) ZEROG25 (25" Wheel) NLA NLA ZEROG26 (25" Wheel) SPLX24 (24" Spin) SPLX25 (25" Spin) FN624 (24" Fusion) FN625 (25" Fusion) FN NLA (26" Fusion) See Note(s) A NOTE: A - Part No Longer Available individually. See Part # 2344 for replacement. CRF8 Coated Handrim Handrim Attaching Hardware

52 Handrims and Handrim Hardware - Natural Fit and Natural Fit LT 5

53 Handrims and Handrim Hardware - Natural Fit and Natural Fit LT Item Number Note Part Number Description Quantity Per Package Assembly See Chart # Natural Fit Handrims - 6 Point Attaching Wheels (Spoke Wheels) See Chart # Natural Fit LT Handrims - 6 Point Attaching Wheels (Spoke Wheels) 2 A Kit, Handrim Attaching Hardware - 6 Point Screw, Phillips Pan Head (#0-32 x /2") 6 Locknut (#0-32) 6 NLA - Strap, Securing 2 B Instruction Sheet, Natural Fit Handrims NOTE: A - Includes Screws, Locknuts, and Securing Straps. B - Not Shown # Natural Fit Handrims - 6 Point Attaching Wheels (Spoke Wheels) Handrims sold as each. Includes all Attaching Hardware (item 2) and Instruction Sheet. Grip Style 22" CRF6722 Wheels Only 24" Wheels 25" Wheels 26" Wheels Standard See Note(s) A NLA Super Grip NLA See Note(s) A NOTE: A - The Natural Fit Handrims have 6 points of attachment to mount to a wheel. The 22" Spoke wheel (CRF22SP) has 4 points of attachment to mount to a wheel and will not accommodate a Natural Fit Handrim. # Natural Fit LT Handrims - 6 Point Attaching Wheels (Spoke Wheels) Handrims sold as each. Includes all Attaching Hardware (item 2) and Instruction Sheet. Grip Style 24" Wheels Standard Super Grip NOTE: Natural Fit LT Handrims are not available in the 22" version. 25" Wheels " Wheels

54 Wheel Locks & Attaching Hardware 53

55 Wheel Locks & Attaching Hardware Item Number Note Part Number Description Quantity Per Package Assembly A Wheel Lock Assembly, Pull to Lock - Right A Wheel Lock Assembly, Pull to Lock - Left 2 A Wheel Lock Assembly, Push to Lock - Right 2 A 3063 Wheel Lock Assembly, Push to Lock - Left 3 B Hill Holder Wheel Lock Assembly - Right 3 B Hill Holder Wheel Lock Assembly - Left 4 C Kit, Wheel Lock Attaching Hardware (" Tubing) 5 Screw, Allen Head (/4-20 x ") 2 6 Clamp, Half, Non-Threaded 7 Clamp, Half, Threaded 8 B Wheel Lock Assembly, Undermount - Right 8 B Wheel Lock Assembly, Undermount - Left 9 D Clamp Assembly, Wheel Lock Package, Cap, Brake Lever End, Black Tip, Plastic, Black 2 E Handle, Wheel Lock Extension, Black (6") (Pair) NOTE: A - each of Item 0 included with wheel lock B - each of Item included with wheel lock C - For use with push, pull and hill holder wheel lock. D - For use with undermount wheel lock. E - Wheel Lock Extension Handle used with item number and 2 only 54

56 Anti-Tipper Assembly 55

57 Item Number Note Part Number Description Anti-Tipper Assembly Quantity Per Package Assembly A Kit, Anti-Tip Assembly 2 Bracket, Anti-Tip - Right 3 Bracket, Anti-Tip - Left 4 Anti-Tipper 2 5 Screw, Socket Head (/4-28 x 7/8") 4 6 Spacer, Crossbrace (/4 x 7/6 x 5/6) 4 NOTE: A - Includes items 2, 3, 4, and 5. Anti-Tip Rear Seat To Floor Reference Chart Rear Seat to Floor 4" 4-/2" 5" 5-/2" 6" 6-/2" 7" 7-/2" 8" 8-/2" 9" 9-/2" 20" CRF22SP, CRF6722 (22" Wheel) ZEROG24, CRF6724 SPLX24, FN624 (24" Wheel) ZEROG25, CRF6725 SPLX25, FN625 ZERO26, CRF6726, FN626 (25 & 26" Wheels)

58 Miscellaneous Accessories NOTE: Part Number Description Package Quantity Assembly Quantity Carrier, Luggage (Pair) Calf Strap, 2" - 20" Wide Chairs (36" Long) NLA Guard, Spoke, Composite (22") Guard, Spoke (24") Guard, Spoke (26") Pouch, Seat (8-/2" W x 7" H x 4" D) Positioning Strap Assembly, Hook and Loop (2" - 8" W) Positioning Strap Assembly, Hook and Loop (9" - 20" W) Positioning Strap Assembly, Auto Style 0977 See Note(s) B Gauge, Alignment Protector, Frame, Front, Blue Protector, Frame, Back, Blue NLA Protector, Frame, Front, Silver NLA Protector, Frame, Back, Silver Protector, Frame, Front, Red Protector, Frame, Back, Red Protector, Frame, Front, Black Protector, Frame, Back, Black B - Measures Toe In and Toe Out. 57

59 Invacare Corporation One Invacare Way Elyria, Oh USA Technical Support Customer Service Literature Orders Invacare Corporation. All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by and. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted. (Revised 4//8)