Storm Series 3G Front Riggings & MKIV Electronics

Transcription

1 Parts Catalog Issued: Aug, 208 Storm Series 3G Front Riggings & MKIV Electronics Arrow Ranger X Torque SP/SE Power Wheelchairs

2 Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If you have any questions regarding this catalog, please contact one of our Customer Service Representatives. SYMBOL DEFINITION For Customer Service Support Call: For Faxed In Orders Call: or For Technical Service Call: Literature Can Be Found at: or Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the bottom of the page or below specified charts. Examples: A,B,C etc. NOTE: NLA = Special Comments = General information pertaining to that specific page = No Longer Available HARDWARE MEASUREMENTS The measurements for the hardware will be listed as follows: Screws, Bolts Diameter X Thread Count/Pitch X Length Washers Inside Diameter X Outside Diameter X Thickness Spacers Inside Diameter X Outside Diameter X Length For your convenience, we have supplied an area for you to list your Invacare Representatives. Name Phone Numbers 208 Invacare Corporation. Elyria, Ohio. Invacare, Yes, you can., the Blue Medallion Design, Storm Series, Arrow, Tarsys are registered trademarks and MKIV, Ranger X, Torque, and GB are trademarks of Invacare Corporation. Otto Bock is a registered trademark of Otto Bock Orthopaedische Industrie GMBH & Co., Tash is a registered trademark of Tash International Inc., Therafin is a registered trademark of W/R/ Medical Electronics Co., Bussman is a registered trademark of Cooper Industries., MIDI is a registered trademark of Littelfuse Inc., Dynamic is a registered trademark of Dynamic Controls Limited.

3 TABLE of CONTENTS Description Page Number A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!)... 6 Electronics - Controller Shroud Covers Electronics - Dual Legs Integrated Actuator Module (DLIAM) MK6i For ELRPW Front Riggings 03 Electronics - MK6i ~PLEASE READ FIRST Electronics - MKIV Controllers, Programmer and Hardware - MKIV Quad Pulse, RII Retro and RII 80 Amp 9 Electronics - MKIV Controllers, Programmer and Hardware - MKIV TrueTrack Electronics - MKIV Displays Electronics - MKIV Elevating Seat Toggle Switch Electronics - MKIV Joystick Mounting Hardware and Joystick Accessories Electronics - MKIV Joystick Options Electronics - MKIV Joysticks - PSF and PSR Electronics - MKIV Joysticks - RII, TCHJOY, A, A Electronics - MKIV Mid-Line Swing Bracket Assembly... 2 Electronics - MKIV R.I.M. Head Control Assembly Electronics - MKIV R.I.M. Head Control Mounting Hardware Electronics - MKIV Sip-N-Puff/Digital Interface and COM2 and COM Electronics - MKIV Swivel Joystick Hardware... Electronics - MKIV TAC and 4-Way Switch... 3 Electronics - MKIV TAC and 4-Way Switch For TRBKTS Option Electronics - Quad Link (Before 0/3/05 - ASBA) (Before 4/07/06 - Captain Seat)... 3 Electronics - Quad Link (QLA) (After 0/30/05 - ASBA), (QL) (After 4/06/06 - Captain Seat).. 6 2

4 TABLE of CONTENTS Description Page Number Electronics - Tash and Therafin Accessories Frame Finishes, Touch-Up Paints and Upholstery Options... 7 Front Riggings - Adjustable Angle Footplate Assemblies - AT5543 For AT Front Riggings - Adjustable Angle Footplate Assemblies- AT Front Riggings - Adjustable Heel Loops Front Riggings - Calf Pads and Attaching Hardware Front Riggings - Flip-Up Footplates - AT Front Riggings - Footrest and Legrest Accessories Front Riggings - Footrest Support Assemblies... 3 Front Riggings - Footrest Supports - P93M Front Riggings - Footrest Supports - PW Front Riggings - Footrest Supports - PW93E Front Riggings - Footrest Supports - PW93ST Front Riggings - Front Rigging Hanger Asbly. - Pin & Sector Style For ASBA Seats (Before 7/5/05) and All Van Seats 25 Front Riggings - Front Rigging Hanger Hdwr., Pin & Sector Style For ADJASBA (2-6" W) (After 7/4/05) 27 Front Riggings - Front Rigging Hanger Hdwr., Pin & Sector Style For ADJASBA/ADJRECL (6-24" W) (After 7/4/05) 29 Front Riggings - Legrest Release Handles and Ratchets Front Riggings - Legrest Support Assembly - AT Front Riggings - Legrest Support Assembly - P904A Front Riggings - Legrest Support Assembly - Wedge Style AT Front Riggings - Legrest Support Assembly, Articulating - PAS4A/PAL4A

5 TABLE of CONTENTS Description Page Number Front Riggings - One Piece Wooden Footboard and Hardware - S Front Riggings - Pivot/Slide Tube & 350 Extra Large Aluminum Footplates - AT Front Riggings - Pivot/Slide Tube & 65 Composite Footplates - AT Front Riggings - Pivot/Slide Tube &65 Composite Footplates Front Riggings - Pivot/Slide Tube and 650, 450, 350 Aluminum Footplates Front Riggings - Power Articulating Legrest - Harness & Hdwr. (After 7/4/05) Front Riggings - Power Articulating Legrest Kits, ELRPW - (5//02-7/26/04) Front Riggings - Power Articulating Legrest Kits, ELRPW - (After 7/26/04) Front Riggings - Power Articulating Legrest Kits, POWELR8 - (Before 9/5/0) Front Riggings - Power Articulating Legrest Kits, POWELR20 - (Before 9/5/0) Front Riggings - Power Articulating Legrest, ELRPW - (After 7/26/04) Front Riggings - Power Articulating Legrest, ELRPW - (Between 5//02-7/26/04) Front Riggings - Power Articulating Legrest, POWELR8/POWELR20 - (Before 9/5/0) Front Riggings - Power Articulating/Non-Articulating Legrest - Harness & Hdwr. (Before 7/5/05) 89 Front Riggings - Power Non-Articulating Legrest Kits, POWELR8/POWELR20 - (9/5/0 thru 4/30/02) 96 Front Riggings - Reference Chart - 70MFX and 90 SWING Front Riggings - Reference Chart - AT5544, AT5044, 60HD, 70NHD, PW93, PW93E, 60MFX 4 Front Riggings - Reference Chart - P904, PAL4A, PAS4A... 7 Front Riggings - Reference Chart - P93M... 9 Front Riggings - Reference Chart - PW93ST and 70ST TAPER Front Riggings- Power Non-Articulating Legrest, POWERLR8/POWERLR20 - (9/5/0 Thru 4/30/02) 79 4

6 TABLE of CONTENTS Description Page Number Label Locations For TRRO and TRBKTS Options... 2 Packaging, Literature and Decals... 9 TRRO and TRBKTS Option Clarification Reference

7 A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!) 6

8 Frame Finishes, Touch-Up Paints and Upholstery Options Frame Finishes and Touch-Up Paint Color Number Part Number Bottle Size Frame Finish 08P NLA.6 oz. Deep Purple 7P NLA.6 oz. Cobalt Blue 22P NLA.6 oz. Anthracite 24P NLA.6 oz. Wet Black 29P NLA.6 oz. White 30P Sunny Yellow 33P NLA.6 oz. Red 34P NLA.6 oz. Flat Black 60P Silver Metallic 6P NLA.6 oz. Electric Red 62P NLA.6 oz. Electric Blue 66P NLA.6 oz. Electric Purple 69P 0320-NLA.6 oz. Teflon Black 7P Silver Vein 80P NLA.6 oz. Evergreen with Navy 83P NLA.6 oz. Royal Blue with Grape 84P NLA.6 oz. Lavender 0P 0325-NLA.6 oz. Jeweled Green 02P 0327-NLA.6 oz. Denim Blue 03P 0324-NLA.6 oz. Mocha Frost 04P 036-NLA.6 oz. Electric Teal 05P 0326-NLA.6 oz. MIdnight Blue 5P 3337-NLA.6 oz. Black Prism 6P NLA.6 oz. Sunkissed Orange 7P NLA.6 oz. Tangerine Red 8P NLA.6 oz. Fruit Fusion 9P NLA.6 oz. Bubblegum Pink 20P NLA.6 oz. Grape Madness 2P NLA.6 oz. Lolly Pop Blue 22P NLA.6 oz. Cosmic Blue 23P NLA.6 oz. Celestial Purple 24P NLA.6 oz. Vivid Violet 25P 3338-NLA.6 oz. Emerald Green 26P NLA.6 oz. Shamrock Green 27P NLA.6 oz. Grasshopper Green 7

9 Frame Finishes, Touch-Up Paints and Upholstery Options Sparkle Frame Finishes Color Number 88P Frame Finish Wet Black with Twilight Sparkle Upholstery Options Vinyl Color U67 Black Nylon Color U240 Black 8

10 Packaging, Literature and Decals 9

11 Packaging, Literature and Decals Item Number Note Part Number Description A B C D H 4 I 5 K 6 7 M 7 M 7 M 7 M N L 4 4 L 4 4 L 4 4 L 5 A 5 B 5 C F,G F,G,L F,G,L F,G F,G,L F,G F,G,L Quantity Per Package Assembly Carton, Cover Carton, Cover Carton, Cover Carton, Cover NLA NLA - Tube, Paper NLA NLA - Bag, Poly (28" W x 44" D x 80" H) Carton, Tray Carton, Tray 2 See Note See Footnote 0249-NLA NLA - Bag, Poly Zip-Lip (3" L x 9" W) 3479-NLA NLA - Owner's Manual, 3G Storm with MKIV Electronics 435-NLA NLA - Owner's Manual, 3G Storm Base with MK6i Electronics 4392-NLA NLA - Owner's Manual, ADJASBA Seat with MK6i Electronics 4395-NLA NLA - Owner's Manual, Van Seat's with MK6i Electronics 00077X03-NLA NLA - Warranty Card 50000X2 Strap, Battery Lift 0200-NLA NLA - Carton, Joystick 403X0 Carton, Front Riggings 403X6 Insert, Plain Pad Decal, Transportation 928-NLA NLA - Plate, Name, Patent Numbers Decal, Torque SP, Yellow NLA NLA - Decal, Torque SP, Black NLA NLA - Decal, Torque SE, Yellow NLA NLA - Decal, Torque SE, Black NLA NLA - Decal, Yellow - Arrow NLA NLA - Decal, Black - Arrow Storm NLA NLA - Decal, Yellow - Ranger X NLA NLA - Decal, Black - Ranger X Carton, Corner Reinforcement NLA Carton, Corner Reinforcement NLA Carton, Corner Reinforcement NLA NLA - Package, Decal, Yellow - Torque SP NLA NLA - Package, Decal, Black - Torque SP NLA NLA - Package, Decal, Yellow - Torque SE NLA NLA - Package, Decal, Black - Torque SE NLA NLA - Package, Decal, Yellow - Arrow Package, Decal, Black - Arrow NLA NLA - Package, Decal, Yellow - Ranger X NLA NLA - Package, Decal, Black - Ranger X 2 0

12 Packaging, Literature and Decals Item Number Note Part Number Description NOTE: Quantity Per Package Assembly E,G NLA NLA - Kit, T-Nut with Instruction Sheet G,J Package, Cover, Frame Rail - Right/Left 6 A - 2" W - 20" W Non-Recliner, Extended and H.B. Captain Seats 8" W B - 6" W - 20" W Recliner and 6" W - 20" W Non-Recliner w/medium/tall Seat-to-Floor C - 2" W - 24" W Non-Recliner and Recliner, H.B. Captain Seat 22" W D - Base only and all A.S.B.A. seat only models E - Used with Storm base only F - Decal package includes model, transportation and patent numbers decals. G - Not Shown H - 2" W - 20" W Chairs and Base Only I - 2" W - 24" W Chairs J - 3 each Right and Left K - Skid not supplied L - Black Decal is used whenever frame color 30P, Sunny Yellow is ordered. M - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. N - Can use part #403X0 for a Joystick also. NOTE: When adjusting or replacing parts, please refer to your Owner's Manual for assistance.

13 Label Locations For TRRO and TRBKTS Options 2

14 TRRO and TRBKTS Option Clarification Reference TRRO and TRBKTS Option was introduced 2/9/05 as an On-Chair option only. 3

15 Front Riggings Reference Chart For AT5544, AT5044, 60HD, 70NHD, PW93, PW93E, 60MFX NOTE: Calf pads with attaching hardware not included on legrest. NOTE: Pivot/ Slide tube attaching hardware not included. NOTE: Pivot/Slide tube and footplates do not include heel loops. See footrest and legrest accessories. 65 = Composite footplate with 9-7/8" curved pivot/ slide tube. AT5543 = Adjustable angle footplate with 9-7/8" straight pivot/ slide tube. 450 = Deluxe aluminum footplate with "L" style pivot/ slide tube. 350 = Extra large footplate with "L" style pivot/ slide tube. Support Assemblies Pivot/Slide tube and footplates are interchangeable with the support assemblies listed. Rigging Type Right AT HD 70NHD PW93 PW93E NL A 60MFX Left See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A NL A NOTE: See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A A - Specify frame color when ordering, see page titled "Frame Finishes and Touch-Up Paints". Pivot/ Slide Tube and Footplates Footplate Type Right Left " W " W " W " W AT " W AT " W AT " W

16 Front Riggings Reference Chart For AT5544, AT5044, 60HD, 70NHD, PW93, PW93E, 60MFX 2" Longer Pivot/ Slide Tube and Footplates Footplate Type Right Left " W NLA " W " W " W AT " W AT " W AT " W " Longer Pivot/ Slide Tube and Footplates Footplate Type Right Left " W NLA NLA " W " W " W AT " W AT " W 238-NLA 239-NLA AT " W Support Assembly NOTE: Rigging Type Right Left AT See Note(s) A See Note(s) A A - Specify frame color when ordering, see page titled Frame Finishes and Touch-Up Paints. Pivot/ Slide Tube and Footplates Footplate Type Right Left " W NLA NLA 5

17 Front Riggings Reference Chart For AT5544, AT5044, 60HD, 70NHD, PW93, PW93E, 60MFX Support Assemblies - AT5044 NOTE: Rigging Type Right Left AT See Note(s) A See Note(s) A A - Specify frame color when ordering, see page titled "Frame Finishes and Touch-Up Paints". Pivot/ Slide Tube and Footplates For AT5044 Footplate Type Right Left Right 2" Longer Left 2" Longer 65 4" W NLA " W " W AT " W AT " W AT " W

18 Front Riggings Reference Chart For P904, PAL4A, PAS4A NOTE: Calf pads with attaching hardware not included on legrest. NOTE: Pivot/Slide tube attaching hardware not included. NOTE: Pivot/Slide tube and footplates do not include heel loops. See footrest and legrest accessories. 650 = Aluminum footplate with "L" style pivot/slide tube. AT5543 = Adjustable angle footplate wtih 9-7/8" straight pivot/slide tube. 450 = Deluxe aluminum footplate with "L" style pivot/slide tube. 350 = Extra large footplate with "L" style pivot/slide tube. Support Assembly Pivot/Slide tube and footplates are interchangeable with the support assemblies listed. NOTE: Rigging Type Right Left P NLA See Note(s) A NLA See Note(s) A A - Specify Frame Color when ordering, see page titled "Frame Color and Touch-Up Paint". Pivot/Slide Tube and Footplates Footplate Type Right Left " W NLA NLA " W " W NLA NLA " W AT " W AT " W

19 Front Riggings Reference Chart For P904, PAL4A, PAS4A 2" Longer Pivot/Slide Tube and Footplates Footplate Type Right Left " W " W NLA NLA " W " W NLA NLA AT " W AT " W " Longer Pivot/Slide Tube and Footplates Footplate Type Right Left " W " W NLA NLA " W " W NLA NLA AT " W AT " W Support Assembly Pivot/Slide tube and footplates are interchangeable with the support assemblies listed. Rigging Type Right Left PAL4A/PAS4A (Chrome Only) NLA NLA Pivot/Slide Tube and Footplates Footplate Type Right Left " W NLA NLA " W " W NLA NLA " W AT " W AT " W

20 Front Riggings Reference Chart For P93M NOTE: Pivot/Slide tube attaching hardware not included. NOTE: Pivot/Slide tube and footplates do not include heel loops. See footrest and legrest accessories. 650 = Aluminum footplate with "L" style pivot/slide tube. 450 = Deluxe aluminum footplate with "L" style pivot/slide tube. 350 = Extra large footplate with "L" style pivot/slide tube. Support Assemblies Pivot/Slide tube and footplates are interchangeable with the support assemblies listed. NOTE: Rigging Type Right Left P93M NLA See Note(s) A NLA See Note(s) A A - Specify frame color when ordering, see page titled "Frame Finishes and Touch-Up Paints". Pivot/Slide Tube and Footplates Footplate Type Right Left Complete 93BK Footrest Assembly w/ 450 Deluxe Aluminum Footplate and Heel Loop attached. (sold complete) - Right Complete 93BK Footrest Assembly w/ 450 Deluxe Aluminum Footplate and Heel Loop attached. (sold complete) - Left " W NLA NLA " W NLA " W NLA See Note(s) A NLA See Note(s) A 02303X07-NLA See Note(s) B 02303X08-NLA See Note(s) B " W NLA NLA 9

21 NOTE: Front Riggings Reference Chart For P93M A - No longer available as a service part individually. Order as a replacement part number 02303X07 Right and 02303X08 Left Footrest Assembly complete. B - Not Shown. Includes a Footrest Support Assembly, Pivot/Slide Tube w/ Deluxe Aluminum Footplate (450) and Heel Loop attached. Items are sold complete. Covers 6-20" wide models. 20

22 Front Riggings Reference Chart For P93M 2" Longer Pivot/Slide Tube and Footplates Footplate Type Right Left " W NLA NLA 4" Longer Pivot/Slide Tube and Footplates Footplate Type Right Left " W NLA NLA 2

23 Front Riggings Reference Chart For 70MFX and 90 SWING NOTE: Footplates do not include heel loops. See footrest and legrest accessories. AT5543 = Adjustable angle footplates without pivot/slide tubes. AT5043 = Flip up footplates without pivot/slide tubes. Support Assemblies Footplate Assemblies are interchangeable with the support assemblies listed. NOTE: Rigging Type Right Left 70MFX See Note(s) A See Note(s) A A - Specify frame color when ordering, see page titled "Frame Finishes and Touch-Up Paints". Support Assemblies Footplate Assemblies are interchangeable with the support assemblies listed. NOTE: Rigging Type Right Left 90 SWING See Note(s) A See Note(s) A A - Specify frame color when ordering, see page titled "Frame Finishes and Touchup Paints". Footplate Assemblies Footplate Type Right Left AT " W NLA NLA AT " W NLA AT " W AT " W

24 Front Riggings Reference Chart For PW93ST and 70ST TAPER NOTE: Pivot/Slide tube attaching hardware not included. NOTE: Pivot/Slide tube and footplates do not include heel loops. See footrest and legrest accessories. 65 = Composite footplate with 9-7/8" curved pivot/slide tube. Support Assemblies Pivot/Slide tube and footplates are interchangeable with the support assemblies listed. NOTE: Rigging Type Right Left PW93ST NLA See Note(s) A NLA See Note(s) A A - Specify frame color when ordering, see page titled "Frame Finishes and Touch-Up Paints". Support Assemblies Pivot/Slide tube and footplates are interchangeable with the support assemblies listed. NOTE: Rigging Type Right Left 70ST TAPER See Note(s) A See Note(s) A A - Specify frame color when ordering, see page titled "Frame Finishes and Touch-Up Paints". Pivot/Slide Tube and Footplates Footplate Type Right Left " W " W " W

25 Front Riggings Reference Chart For PW93ST and 70ST TAPER 2" Longer Pivot/Slide Tube and Footplates Footplate Type Right Left " W NLA " W " W

26 Front Rigging Hanger Assembly Pin & Sector Style For ASBA Seats (Before 7/5/05) and All Van Seats NOTE: Front rigging hanger assemblies and seat pans share the same mounting hardware, see Seat Pan and Mounting Hardware page. 25

27 Front Rigging Hanger Assembly Pin & Sector Style For ASBA Seats (Before 7/5/05) and All Van Seats NOTE: Front rigging hanger assemblies and seat pans share the same mounting hardware, see Seat Pan and Mounting Hardware page. Item Number Note Part Number Description Quantity Per Package Assembly A Front Rigging Hanger Assembly w/ Sector Block, Black - Right (2-2" D) A Front Rigging Hanger Assembly w/ Sector Block, Black - Left (2-2" D) A NLA NLA - Front Rigging Hanger Assembly w/ Sector Block, Black - Right (22" D) A NLA NLA - Front Rigging Hanger Assembly w/ Sector Block, Black - Left (22" D) 2 B Kit, Sector Block - Right 2 B Kit, Sector Block - Left Screw, Hex Head w/ Patch (/4-20 x 2") Washer (/4 x /2 x /6") 5 C NLA NLA - Hanger Assembly, Front Rigging, Pin Style, Black - Right (2-2" D) 5 C NLA NLA - Hanger Assembly, Front Rigging, Pin Style, Black - Left (2-2" D) 5 C NLA NLA - Hanger Assembly, Front Rigging, Pin Style, Black - Right (22" D) 5 C NLA NLA - Hanger Assembly, Front Rigging, Pin Style, Black - Left (22" D) Plug Button, Black (3/4") NOTE: A - Includes item 2 B - Includes the sector block and items 3 and 4 C - Includes item 6 26

28 Front Rigging Hangers and Hardware Pin & Sector Style For ADJASBA (2"-6" Wide) (After 7/4/05) 27

29 Front Rigging Hangers and Hardware Pin & Sector Style For ADJASBA (2"-6" Wide) (After 7/4/05) Item Number Note Part Number Description Quantity Per Package Assembly A 2650 Kit, Side Rail Cap Hardware 2 2 Screw, Socket Head Cap w/ Patch (/4-20 x -/2") 2 3 Spacer (/4 x 3/8 x 29/32") 2 4 Cap, End, Side Rail, Black 2 5 Washer (/4 x /2 x /6") 2 6 Locknut (/4-20) 2 7 Plug Button, Black (7/8") 2 8 B 3609 Kit, Front Rigging Hanger Mounting Hardware 2 9 Screw, Socket Head Cap w/ Patch (/4-20 x -/2") 4 0 Spacer (/4 x 3/8 x 3/6") 4 Cap, End, Side Rail, Black 2 2 Washer (/4 x /2 x /6") 4 3 Locknut (/4-20) 4 4 C Front Rigging Hanger Assembly w/ Sector Block, Black - Right 4 C Front Rigging Hanger Assembly w/ Sector Block, Black - Left 5 D Kit, Sector Block - Right 5 D Kit, Sector Block - Left Front Rigging Hanger Assembly w/ Plug Button, Pin Style, Adult, Black - Right Front Rigging Hanger Assembly w/ Plug Button, Pin Style, Adult, Black - Left Package, Plug Button, Black (3/4") 0 NOTE: A - Includes items 2-7 B - Includes items 9-3 C - Includes Front Rigging Hanger and item 5 D - Includes the Sector Block, Screw and Washer 28

30 Front Rigging Hangers and Hardware Pin & Sector Style For ADJASBA/ADJRECL (6"-24" Wide) (After 7/4/05) 29

31 Front Rigging Hangers and Hardware Pin & Sector Style For ADJASBA/ADJRECL (6"-24" Wide) (After 7/4/05) Item Number Note Part Number Description Quantity Per Package Assembly A Kit, Side Rail Cap Hardware (Pair) 2 Screw, Socket Head Cap w/ Patch (/4-20 x -/2") 4 3 Spacer (/4 x 3/8 x 29/32") 4 4 Cap, End, Side Rail, Black 2 5 Plug Button, Black (") 2 6 Block, Threaded 2 7 B Kit, Front Rigging Hanger Mounting Hardware (Pair) 8 Screw, Socket Head Cap w/ Patch (/4-20 x -/2") 4 9 Spacer (/4 x 3/8 x 3/6") 4 0 Cap, End, Side Rail, Black 2 Block, Threaded 2 2 C Front Rigging Hanger Assembly w/ Sector Block, Black - Right 2 C Front Rigging Hanger Assembly w/ Sector Block, Black - Left 3 D Kit, Sector Block - Right 3 D Kit, Sector Block - Left Front Rigging Hanger Assembly w/ Plug Button, Pin Style, Adult, Black - Right Front Rigging Hanger Assembly w/ Plug Button, Pin Style, Adult, Black - Left Package, Plug Button, Black (3/4") 0 NOTE: A - Includes items 2-6 B - Includes items 8- C - Includes Front Rigging Hanger and item 3 D - Includes the Sector Block, Screw and Washer 30

32 Footrest Support Assemblies Sector Style 3

33 Item Number Note Part Number Description A,C A,C A,D A,D A,C A,C A,D A,D A,D A,D A,D A,D 2 3 G 3 G B 2 F A E Footrest Support Assemblies Sector Style Quantity Per Package Assembly Footrest Support Assembly, 60 Degree Heavy Duty, Sector, Color - Right Footrest Support Assembly, 60 Degree Heavy Duty, Sector, Color - Left Footrest Support Assembly, 60 Degree MFX, Sector, Color - Right Footrest Support Assembly, 60 Degree MFX, Sector, Color - Left Footrest Support Assembly, 70 Degree Non-Tapered Heavy Duty, Sector, Color - Right Footrest Support Assembly, 70 Degree Non-Tapered Heavy Duty, Sector, Color - Left Footrest Support Assembly, 70 Degree Tapered, Sector, Color - Right Footrest Support Assembly, 70 Degree, Tapered, Sector, Color - Left Footrest Support Assembly, 70 Degree MFX, Sector, Color - Right Footrest Support Assembly, 70 Degree MFX, Sector, Color - Left Footrest Support Assembly, 90 Degree, Sector, Color - Right Footrest Support Assembly, 90 Degree, Sector, Color - Left Screw, Socket Button Head (/4-20 x -3/4") Plug Button, Black (") Plug Button, Black (") 0748 Pivot, Footrest Locknut (/4-20) Screw, Slotted Hex Washer Head (#0-32 x 5/8") Screw, Slotted Hex Washer Head w/ Patch (#0-32 x /2") Housing, Latch - Right Housing, Latch - Left Collar, Anti-Rattle Screw, Hex Head w/ Patch (/4-20 x 3/4") Spacer, Coved (/4 x /6 x /2") Insert, Threaded Screw, Hex Head (/4-20 x -/2") Nut, Hex with Nylon Cap (/4-20) Kit, Pivot/Slide Tube Mounting Hardware (Pair) Kit, Pivot/Slide Tube Mounting Hardware (Pair) Kit, 3" Extension w/ Hardware (Pair) Guard, Impact (8" L) 32

34 NOTE: Footrest Support Assemblies Sector Style A - Specify frame color when ordering. See page titled "Frame Finishes and Touch-Up Paints." B - Item 6 takes 2 C - Uses Item Number 3, Plug Button D - Uses Item Number 3, Plug Button E - Not Shown. For 70 deg. Tapered Footrest. F - As of 8/5/03, the Threaded Insert was revised from 3 to 5 Holes. Threaded Insert is Backward Compatible and does not require ordering in Pairs. G - See item # footnote C or D for Front Rigging Plug Button usage. 33

35 AT5544 Legrest Support Assembly (Sector Style) 2"-24" Wide Chairs 34

36 AT5544 Legrest Support Assembly (Sector Style) 2"-24" Wide Chairs Item Number Note Part Number Description Quantity Per Package Assembly 0787 Cover, Top Screw, Phillips Pan Head (#8-32 x 3/8") X000 Hex Nut (3/8"-6) Washer, Nylon (25/64 x 7/8 x /32") X000-NLA NLA - Screw, Slotted Truss Head (3/8-6 x -/2") NLA NLA - Locknut (5/6-24) Bolt, Lug (5/6-24 x -3/8") NLA NLA - Tube, Elevating Adjustable Support, Black - Right NLA NLA - Tube, Elevating Adjustable Support, Black - Left 8 A Tube, Elevating Adjustable Support, Color - Right 8 A Tube, Elevating Adjustable Support, Color - Left Bracket, Legrest Pad Mounting, Black X002 Bracket, Release, Black Screw, Slotted Hex Washer Head (#0-32 x 5/8") Housing, Latch - Right Housing, Latch - Left Package, Screw, Slotted Hex Washer Head (# x /2") X00 Bar, Ratchet NLA NLA - Nut, Acorn (5/6-24) Pivot, Footrest Plug Button, Black (") NLA NLA - Package, Button Head Cap Screw (/4-20 x 25-3/4") 9 A Bracket, Legrest Support, Color - Right 9 A Bracket, Legrest Support, Color - Left Ring, Snap NLA NLA - Washer, Nylon (5/6 x /6 x /6") Tip, Plastic, Black Spring, Release Cam, Legrest Handle, Release 26 B Kit, Elevating Legrest Ratchet Hardware (Pair) 2 C,D NLA NLA - Instruction Sheet, Ratchet Kit A,C Legrest Support Assembly, Sector, Color - Right A,C Legrest Support Assembly, Sector, Color - Left NOTE: A - Specify frame color when ordering. See page titled "Frame Finishes and Touch-Up Paints". B - Includes items 0, 4, 5 and C - Not Shown D - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 35

37 Legrest Support Assembly AT5044 Wedge Style ("D" shaped tubing) Specify frame color when ordering. Legrest Support does not include Legrest Pad. 36

38 Legrest Support Assembly AT5044 Wedge Style ("D" shaped tubing) Specify frame color when ordering. Legrest Support does not include Legrest Pad. Item Number Note Part Number Description A,G A,G 2 B B C Quantity Per Package Assembly Legrest Support Assembly, Sector, Color - Right Legrest Support Assembly, Sector, Color - Left Legrest Support Tube Assembly, Sector, Color - Right Plug Button, Black (") Screw, Socket Button Head (/4-20 x -3/4") Tube, Legrest Support, Sector, Color - Right Bolt, Lug (5/6-24 x -3/8") Plug, Insert (7/8") Screw, Socket Button Head w/ Patch (#0-32 x 2 /4") Washer (/4 x /2 x /32") 2 Spacer (5/6 x /2 x 3/6") Spacer, Threaded (0-32 x /4 x 5/8") Nut, Low Cap (5/6"-24) Housing, Latch - Right Screw, Slotted Hex Washer Head (#0-32 x 5/8") 2 Locknut (/4-20) Screw, Slotted Hex Washer Head w/ Patch (#0-32 x /2") Pivot, Footrest Package, Plug Button, Black (") Legrest Support Tube Assembly, Sector, Color - Left Plug Button, Black (") Screw, Socket Button Head (/4-20 x -3/4") Tube, Legrest Support, Sector, Color - Left Bolt, Lug (5/6-24 x -3/8") Plug, Insert (7/8") Screw, Socket Button Head w/ Patch (#0-32 x 2 /4") Washer (/4 x /2 x /32") 2 Spacer (5/6 x /2 x 3/6") Spacer, Threaded (0-32 x /4 x 5/8") Nut, Low Cap (5/6"-24) Housing, Latch - Left Screw, Slotted Hex Washer Head (#0-32 x 5/8") 2 Locknut (/4-20) Screw, Slotted Hex Washer Head w/ Patch (#0-32 x /2") Pivot, Footrest Package, Plug Button, Black (") Kit, Pivot Rod Assembly - Right 37

39 Legrest Support Assembly AT5044 Wedge Style ("D" shaped tubing) Specify frame color when ordering. Legrest Support does not include Legrest Pad. Item Number Note Part Number Description C D Quantity Per Package Assembly Locknut (/4-20) Lever, Release - Right Screw, Socket Button Head w/ Patch (#0-32 x 2 /4") Washer (/4 x /2 x /32") 2 Spacer, Threaded (0-32 x /4 x 5/8") Rod, Pivot Screw, Socket Button Head (/4-20 x -/4") Guide, Pivot Rod Rivnut (0-32 x ") NLA - Screw, Phillips Pan Head w/patch (#0-24 x 3/8") Pin, Roller Spring, Torsion Cap, Brake Lever End, Black Package, Cap, Brake Lever End, Black Kit, Pivot Rod Assembly - Left Locknut (/4-20) Lever, Release - Left Screw, Socket Button Head w/ Patch (#0-32 x 2 /4") Washer (/4 x /2 x /32") 2 Spacer, Threaded (0-32 x /4 x 5/8") Rod, Pivot Screw, Socket Button Head (/4-20 x -/4") Guide, Pivot Rod Rivnut (0-32 x ") NLA - Screw, Phillips Pan Head w/patch (#0-24 x 3/8") Pin, Roller Spring, Torsion Cap, Brake Lever End, Black Package, Cap, Brake Lever End, Black NL NLA - Kit, Elevating Support Tube, Color - Right A Plug, Insert (7/8") Locknut, Nylon Cap (5/6-24) Spacer (5/6 x /2 x 3/6") Bolt, Lug (5/6-24 x -3/8") Tube, Elevating Support, Color - Right Rivnut, Phillips Pan Head (0-24 x ") Screw, Phillips Pan Head w/ Patch (0-24 x 3/8") Washer (#20) 38

40 Legrest Support Assembly AT5044 Wedge Style ("D" shaped tubing) Specify frame color when ordering. Legrest Support does not include Legrest Pad. Item Number Note Part Number Description D NL A Quantity Per Package Assembly Locknut, Nylon Cap (5/6-24) NLA - Kit, Elevating Support Tube, Color - Left 7 Plug, Insert (7/8") 33 Locknut, Nylon Cap (5/6-24) 34 Spacer (5/6 x /2 x 3/6") 35 Bolt, Lug (5/6-24 x -3/8") 36 Tube, Elevating Support, Color - Left 37 Rivnut, Phillips Pan Head (0-24 x ") 38 Screw, Phillips Pan Head w/ Patch (0-24 x 3/8") 39 Washer (#20) 40 Locknut, Nylon Cap (5/6-24) 4 E Kit, Legrest Pad Hardware 42 T-Nut (/4-20) 43 Plate, Legrest Pad 44 Locknut (5/6-8) 45 Spacer, Legrest Pad, Black 46 Bracket Assembly, Adjustable Legrest Pad, Color 47 NLA - Washer, Steel (/4 x /2 x 3/64") 48 Screw, Hex Head w/ Patch (/4-20 x /2") 49 Screw, Socket Flat Head (5/6-8 x 2-/4") 50 F Kit, Pivot Slide Tube Attaching Hardware 5 Bolt, Lug (5/6-24 x -3/8") 52 Washer (#20) 53 Locknut, Nylon Cap (5/6-24) 5367 Kit, Housing Latch Handle w/hardware - Right 3 Housing, Latch - Right 4 Screw, Slotted Hex Washer Head (#0-32 x 5/8") 2 6 Screw, Slotted Hex Washer Head w/ Patch (#0-32 x /2") 5368 Kit, Housing Latch Handle w/hardware - Left 3 Housing, Latch - Left 4 Screw, Slotted Hex Washer Head (#0-32 x 5/8") 2 6 Screw, Slotted Hex Washer Head w/ Patch (#0-32 x /2") NOTE: A - Includes items 2, 8, 32, and 4. Specify frame color when ordering this item. B - Includes items 3 thru 7. Specify frame color when ordering this item. C - Includes items 9 thru 3. D - Includes items 7 and 33 thru 40. Specify frame color when ordering this item. E - Includes items 42 thru 49. F - Includes items 5 thru 53. G - Includes items 3, 4 and 6. 39

41 P904A Legrest Support Assembly (Pin Style) Color 4"-24" Wide Chairs Item Number Note Part Number Description Quantity Per Package Assembly Plug Button, Black (7/8") 2 99X000-NLA NLA - Screw, Slotted Truss Head (3/8-6 x -/2") Washer, Nylon (25/64 x 7/8 x /32") X000 Hex Nut (3/8"-6) NLA NLA - Locknut (5/6-24) Bolt, Lug (5/6-24 x -3/8") 7 A Tube, Elevating Adjustable Support, Color - Right 7 A Tube, Elevating Adjustable Support, Color - Left Plug Button, Black (3/4") 9 A NL NLA - Tube, Legrest Support, Color - Right A 9 A NL NLA - Tube, Legrest Support, Color - Left A Bumper Screw, Phillips Pan Head Tap (#0-32 x 3/4") A,B NL NLA - Legrest Support Assembly, Adult, Color - A Right A,B NL A NLA - Legrest Support Assembly, Adult, Color - Left NOTE: A - Specify frame color when ordering. See page titled "Frame Finishes and Touch-Up Paints". B - Not Shown 40

42 PAS4A/PAL4A Articulating Legrest Support Assembly (Pin Style) Chrome 4"-24" Wide Chairs Item Number Note Part Number Description NOTE: Quantity Per Package Assembly NLA NLA - Tube, Legrest Support - Right NLA NLA - Tube, Legrest Support - Left Plug Button, Black (3/4") 40363X000 Hex Nut (3/8"-6) NLA NLA - Screw, Shoulder Slotted Head (/2 x -/8", 3/8-6) NLA NLA - Tube, Support and Drive Link, Chrome - Right NLA NLA - Tube, Support and Drive Link, Chrome - Left Tube, Slide, Articulating, Chrome - Right Tube, Slide, Articulating, Chrome - Left Washer (#20) NLA NLA - Package, Locknut (5/6"-24) X009 Bolt, Lug (5/6-24 x -3/8") NLA NLA - Screw, Socket Button Head (3/8-6 x 3/4") Washer, Nylon (3/8 x 3/4 x /6") NLA NLA - Bar, Link, Black A NLA NLA - Legrest Support Assembly, Articulating, Adult, Chrome - Right A NLA NLA - Legrest Support Assembly, Articulating, Adult, Chrome - Left A - Not Shown 4

43 Legrest Release Handles and Ratchets 42

44 Legrest Release Handles and Ratchets Item Number Note Part Number Description Quantity Per Package Assembly NLA NLA - Package, Screw, Phillips Pan Head (#0-32 x 25 /6") NLA NLA - Package, Screw, Phillips Pan Head (#0-32 x 25 /2") Handle, Release, Black - Right Handle, Release, Black - Left X057 Bushing (7/32 x 3/8 x /32") Spring, Release - Right Spring, Release - Left NLA NLA - Locknut, High Profile (#0-32) NLA NLA - Rivnut (#0-32) Tip, Plastic, Black NLA NLA - Washer, Nylon (5/6 x /6 x /6") 0 C 42326X004 Bar, Ratchet - Right/Left 0 D 0238-NLA NLA - Bar, Ratchet - Right 0 D NLA NLA - Bar, Ratchet - Left 47328X003 Bushing, Pivot (5/6 x 7/6 x 7/8") Ring, Snap Cam, Legrest Spring, Release NLA NLA - Nut, Acorn (5/6-24) X002 Bracket, Release, Black Handle, Release 8 A Kit, Elevating Legrest Ratchet Hardware (Pair) 2 8 B NLA NLA - Kit, Articulating Legrest Ratchet Hardware (Pair) 2 NOTE: A - P904A Legrest B - PAS4A and PAL4A Legrest C - P904A Legrest D - Articulating 43

45 Calf Pads and Attaching Hardware NOTE: For replacement calf pads for Power Articulating Legrest, see Power Articulating Legrest page. Due to a change to the Legrest Calf Pad size made on 4/23/2, you must also order the hardware kit (06659) when ordering replacement Calf Pads. 44

46 Calf Pads and Attaching Hardware NOTE: For replacement calf pads for Power Articulating Legrest, see Power Articulating Legrest page. Due to a change to the Legrest Calf Pad size made on 4/23/2, you must also order the hardware kit (06659) when ordering replacement Calf Pads. Item Number Note Part Number Description Quantity Per Package Assembly A,D Pad w/ Cover and Screws, Legrest Vinyl (Pair) 2 A,D Pad, Legrest, Vinyl - Right/Left A,B,D X003 Pad, Legrest, Vinyl - Right A,B,D X004 Pad, Legrest, Vinyl - Left X09 Plate, Legrest Pad NLA NLA - Locknut (5/6-24) Spacer, Legrest Pad, Black Spacer, Legrest Pad Mounting, Black Screw, Hex Head (5/6-24 x 3-/2") Screw, Hex Head (5/6-24 x -/2") 8 C Hardware, Legrest Pad Screw, Phillips Pan Head (#0-32 x /6") 2 Screw, Phillips Pan Head (#0-32 x ") 2 Instruction Sheet, Legrest Pad Mtg X008 Spring, Leaf NLA NLA - Package, Locknut (5/6"-24) Bracket, Legrest, Chrome Screw, Hex Head (5/6-24 x 3-/4") Bracket, Legrest Pad Mounting, Black NOTE: A - Specify upholstery color. See page titled "Frame Finishes, Touch-Up Paints and Upholstery Options". B - 4"-5" Wide Chairs C - Includes Screws and Instruction Sheet. D - Due to a change to the Legrest Calf Pad size made on 4/23/2, you must also order the hardware kit (06659) when ordering replacement Calf Pads. 45

47 PW93 Footrest Supports (Pin Style) Color 46

48 Item Number Note Part Number Description PW93 Footrest Supports (Pin Style) Color Quantity Per Package Assembly Anti-Rattle, Black X057 Bushing (7/32 x 3/8 x /32") Screw, Phillips Pan Head (#0-32 x /6") Screw, Phillips Pan Head (#0-32 x /2") Handle, Release, Black - Right Handle, Release, Black - Left Locknut (#0-32) NLA NLA - Rivnut (#0-32) Spring, Release - Right Spring, Release - Left X02 Collar, Anti-Rattle (7/8") Screw, Hex Head (/4-20 x -/2") Spacer, Coved (/4 x /6 x /2") Nut, Hex with Nylon Cap (/4-20) 3 C Insert, Threaded Kit, Slide Tube Mounting Hardware A,B Footrest Support Assembly, Adult, Color - Right A,B Footrest Support Assembly, Adult, Color - Left NOTE: A - Specify frame color when ordering. See page titled "Frame Finishes, Touch-Up Paints and Upholstery Options". B - Not Shown. C - As of 8/5/03, the Threaded Insert was revised from 3 to 5 Holes. Threaded Insert is Backward Compatible and does not require ordering in Pairs. 47

49 PW93ST Footrest Supports (Pin Style) Color 48

50 Item Number Note Part Number Description PW93ST Footrest Supports (Pin Style) Color Quantity Per Package Assembly Screw, Phillips Pan Head (#0-32 x /6") Screw, Phillips Pan Head (#0-32 x /2") Handle, Release, Black - Right Handle, Release, Black - Left Locknut (#0-32) NLA NLA - Rivnut (#0-32) NLA NLA - Cushion, Tubular Foam NLA NLA - Cover, Foam Cushion Spring, Release - Right Spring, Release - Left X057 Bushing (7/32 x 3/8 x /32") X02 Collar, Anti-Rattle (7/8") Screw, Hex Head (/4-20 x -/2") Spacer, Coved (/4 x /6 x /2") Nut, Hex with Nylon Cap (/4-20) 4 C Insert, Threaded Kit, Slide Tube Mounting Hardware A,B NL NLA - Footrest Support Assembly, Adult, Color - A Right A,B NL A NLA - Footrest Support Assembly, Adult, Color - Left NOTE: A - Specify frame color when ordering. See page titled "Frame Finishes, Touch-Up Paints and Upholstery Options". B - Not Shown C - As of 8/5/03, the Threaded Insert was revised from 3 to 5 Holes. Threaded Insert is Backward Compatible and does not require ordering in Pairs. 49

51 PW93E Footrest Supports (Pin Style) Color 50

52 Item Number Note Part Number Description PW93E Footrest Supports (Pin Style) Color Quantity Per Package Assembly 5680X02 Collar, Anti-Rattle (7/8") Plug Button, Black (7/8") Bumper Screw, Phillips Pan Head Tap (#0-32 x 3/4") Handle, Release, Black - Right Handle, Release, Black - Left Screw, Phillips Pan Head (#0-32 x /6") X057 Bushing (7/32 x 3/8 x /32") Screw, Phillips Pan Head (#0-32 x /2") Spring, Release - Right Spring, Release - Left NLA NLA - Rivnut (#0-32) Locknut (#0-32) Cap, End Tube, Black (3/4") 3 C Insert, Threaded Screw, Hex Head (/4-20 x -/2") Spacer, Coved (/4 x /6 x /2") Nut, Hex with Nylon Cap (/4-20) Kit, Slide Tube Mounting Hardware A,B NL NLA - Footrest Support Assembly, Adult, Color - A Right A,B NL A NLA - Footrest Support Assembly, Adult, Color - Left NOTE: A - Specify frame color when ordering. See page titled "Frame Finishes, Touch-Up Paints and Upholstery Options". B - Not Shown C - As of 8/5/03, the Threaded Insert was revised from 3 to 5 Holes. Threaded Insert is Backward Compatible and does not require ordering in Pairs. 5

53 P93M Footrest Supports (Pin Style) Color Item Number Note Part Number Description NOTE: Quantity Per Package Assembly NLA NLA - Package, Screw, Phillips Pan Head (#0-32 x /2") NLA NLA - Package, Screw, Phillips Pan Head (#0-32 x 25 /6") 47565X057 Bushing (7/32 x 3/8 x /32") 0732 Nut, Low Cap (5/6"-24) Plug Button, Black (7/8") 2 232X009 Bolt, Lug (5/6-24 x -3/8") Spring, Release - Right Spring, Release - Left Bumper Screw, Phillips Pan Head Tap (#0-32 x 3/4") 67005X000 Rivnut (#0-32) NLA NLA - Locknut (#0-32) Handle, Release, Black - Right Handle, Release, Black - Left A,B NL NLA - Footrest Support Assembly, Adult, Color - A Right A,B NL NLA - Footrest Support Assembly, Adult, Color - A Left A - Specify frame color when ordering. See page titled "Frame Finishes, Touch-Up Paints and Upholstery Options". B - Not Shown 52

54 Footplate and Pivot Tube Assemblies 65 Composite 53

55 Footplate and Pivot Tube Assemblies 65 Composite Item Number Note Part Number Description Quantity Per Package Assembly A See Chart # AT5044 Elevating Legrest - Wedge Style Package, Plug Button, Black, "D" Shaped (3/4") Pivot/Slide Tube w/ D Insert, Black Pivot/Slide Tube w/ D Insert, Black (2" Longer) Footplate, Composite, Small, Black (6" W x 6" L) Footplate, Composite, Medium, Black (7" W x 6" L) Footplate, Composite, Large, Black (8" W x 6" L) Locknut (/4-20) X006 Screw, Socket Head (/4-20 x 2-/4") Spacer, Coved (/4 x 3/4 x /32") 2 NOTE: A - Includes items 2-7 # AT5044 Elevating Legrest - Wedge Style Curved End Right/Left Right Left Small Long 4" Wide Small 2" Longer 4" Wide Medium Long 5" - 6" Wide Medium 2" Longer 5" - 6" Wide Large Long 7" - 24" Wide Large 2" Longer 7" - 24" Wide

56 Pivot/Slide Tube and 65 Composite Footplates NOTE: Heel Loops are not included. See footrest and legrest accessories. NOTE: For complete pivot/slide tube and footplate assemblies, see front riggings reference charts Item Number Note Part Number Description Quantity Per Package Assembly Tube, Pivot/Slide, Curved End, Steel, Black (9-7/8") Tube, Pivot/Slide, Curved End, 2" Longer, Steel, Black Tube, Pivot/Slide, Curved End, 4" Longer, Steel, Black Spacer, Coved (/4 x 3/4 x /32") Plug Button, Black (3/4") NLA NLA - Package, Locknut (/4-20) Package, Socket Head Screw (/4-20 x 2-/4") 25 6 A Footplate, Composite, Small, Black (6" W x 6" L) 6 B Footplate, Composite, Medium, Black (7" W x 6" L) 6 C Footplate, Composite, Large, Black (8" W x 6" L) 6 D Footplate, Composite, Small, Black (6" W x 6" L) 6 E Footplate, Composite, Medium, Black (7" W x 6" L) 6 F Footplate, Composite, Large, Black (8" W x 6" L) NOTE: A - 3"-4" Wide B - 5"-6" Wide C - 7" and Wider D - 5"-7" Wide 70ST TAPER and PW93ST E - 8"-9" Wide 70ST TAPER and PW93ST F - 20" and Wider 70ST TAPER and PW93ST 55

57 Pivot/Slide Tube and 650, 450, 350 Aluminum Footplates NOTE: Heel Loops are not included. See footrest and legrest accessories NOTE: For complete pivot/slide tube and footplate assemblies, see front riggings reference charts. 56

58 Pivot/Slide Tube and 650, 450, 350 Aluminum Footplates NOTE: Heel Loops are not included. See footrest and legrest accessories NOTE: For complete pivot/slide tube and footplate assemblies, see front riggings reference charts. Item Number Note Part Number Description 2 A 2 A 2 A 2 B 2 C 2 D 2 D 2 D 2 E 2 F 2 G 2 H I 4 J 5 I 5 L 5 J,M 6 K 7 Quantity Per Package Assembly Plug Button, Black (3/4") Pivot/Slide Tube w/ Plug Button, Black Pivot/Slide Tube w/ Plug Button, Black (2" Longer) Pivot/Slide Tube w/ Plug Button, Black (4" Longer) Pivot/Slide Tube w/ Plug Button Assembly, Chrome Pivot/Slide Tube w/ Plug Button, Black NLA NLA - Pivot/Slide Tube w/ Plug Button, Black NLA NLA - Pivot/Slide Tube Assembly, Extra Large, Standard Aluminium - 2" Longer, Black NLA NLA - Pivot/Slide Tube w/ Plug Button, Black (4" Longer) Pivot/Slide Tube w/ Plug Button, Black Pivot/Slide Tube w/ Plug Button Assembly, Chrome 0057-NLA NLA - Pivot/Slide Tube w/ Plug Button, Deluxe, Black NLA NLA - Pivot/Slide Tube w/ Plug Button, Deluxe Aluminum, Black 44200X059 Footplate, Aluminum, Small, Black (6-3/4" W x 6" L) 44200X027 Footplate, Aluminum, Medium, Black (7-3/4" W x 6" L) NLA NLA - Footplate, Aluminum, Deluxe, Black - Right (8" W x 5-3/4" L) NLA NLA - Footplate, Aluminum, Deluxe, Black - Left (8" W x 5-3/4" L) 44200X025 Footplate, Aluminum, Extra Large, Black - Right (8" W x 8-/2" L) 44200X026 Footplate, Aluminum, Extra Large, Black - Left (8" W x 8-/2" L) Cap, End, Tube, Black (7/8") Plug Button, Black (7/8") Spring, Tension NLA NLA - Spring Spring, Leaf NLA NLA - Package, Phillips Head Screw (#8-32 x 3/8") Plug, Push, Footplate 57

59 Pivot/Slide Tube and 650, 450, 350 Aluminum Footplates NOTE: Heel Loops are not included. See footrest and legrest accessories NOTE: For complete pivot/slide tube and footplate assemblies, see front riggings reference charts. NOTE: A - Extra Large footplate for 60MFX, AT5544, 60, 70, PW93, PW93E B - Extra Large footplate for PAL4A C - Extra Large footplate for P93M D - Extra Large and Standard Aluminum footplate for P904 E - Standard Aluminum footplate for P93M F - Standard Aluminum footplate for PAL4 G - Deluxe Aluminum footplate for P904 and AT5544 H - Deluxe Aluminum footplate for P93M I - For Standard Aluminum footplate J - For Extra Large footplate K - Deluxe footplate takes ea. L - Deluxe footplate M - Use one or more leaf springs per assembly as required such that footplate may be moved by hand to the up-right position and remain in place. 58

60 Footplate and Pivot/Slide Tube Assemblies 350 Extra Large Aluminum 59

61 Footplate and Pivot/Slide Tube Assemblies 350 Extra Large Aluminum Item Number Note Part Number Description Quantity Per Package Assembly A See Chart #9 Pivot/Slide Tube w/ Extra Large Aluminum Footplate Assembly Package, Plug Button, Black, "D" Shaped (3/4") Pivot/Slide Tube w/ Plug Buttons, Black Screw, Phillips Pan Head Tap (#8-32 x 3/8") Footplate, Aluminum, Extra Large, Black - Right (7" W x 8-/2" L) Footplate, Aluminum, Extra Large, Black - Left (7" W x 8-/2" L) X025 Footplate, Aluminum, Extra Large, Black - Right (8" W x 8-/2" L) X026 Footplate, Aluminum, Extra Large, Black - Left (8" W x 8-/2" L) Package, Plug Button, Black (7/8") Spring, Leaf NOTE: A - Includes items 2-7. # Pivot/Slide Tube w/ Extra Large Aluminum Footplate Assembly Footplate Style Chair Width Right Left AT5044, AT5044LIFT 4" - 5" AT5044, AT5044LIFT 6" - 24"

62 AT5043 Flip-Up Footplates 70deg MFX and 90deg Swingaway Supports NOTE: Heel Loops are not included. See footrest and legrest accessories. Item Number Note Part Number Description Quantity Per Package Assembly NLA NLA - Footplate, Black (4-/4" W x 5-/4" L) (2" W) NLA NLA - Washer, Nylon (3/6 x 3/4 x 5/32") Spacer, Coved (/4 x 3/4 x /32") Plug Button, Black (3/4") Screw, Socket Button Head (0-32 x -/4") Screw, Socket Button Head (/4-20 x -/2") NLA NLA - Screw, Socket Button Head (/4-20 x 2-5/8") NLA NLA - Tube, Footrest, Black NLA NLA - Cam, Adjustment 4057X020 Spacer, Coved (/4 x x 9/6") Locknut (/4-20) Washer (/4 x 5/8 x 3/32") NLA NLA - Flip-Up Footplate Assembly, Black - Right NLA NLA - Flip-Up Footplate Assembly, Black - Left 6

63 Adjustable Angle Footplate Assemblies - AT deg, 60deg MFX, 70deg, 70deg MFX, PW93, PW93E, 90DEG, AT5544, P904, PAS4A/PAL4A Swingaway Supports NOTE: Heel loops are not included. See footrest and legrest accessories. 62

64 Adjustable Angle Footplate Assemblies - AT deg, 60deg MFX, 70deg, 70deg MFX, PW93, PW93E, 90DEG, AT5544, P904, PAS4A/PAL4A Swingaway Supports NOTE: Heel loops are not included. See footrest and legrest accessories. Item Number Note Part Number Description Quantity Per Package Assembly A See Chart Pivot/ Slide Tube with Footplate Assemblies 2 B,F 3572 Footplate, Adjustable Angle, Medium, Black (4-/4" W x 8" L) 2 C,F 3573 Footplate, Adjustable Angle, Large, Black (5-/4" W x 8" L) 2 D,F 3574 Footplate, Adjustable Angle, Extra Large, Black (6-/4" W x 8" L) Clamp, Footplate Tube, Pivot and Slide, Straight, Steel, Black (9-7/8" L) Tube, Pivot/Slide, Straight, Steel, Black (-7/8" L) Tube, Pivot/Slide, Straight, Steel, Black (3-7/8" L) 4 E Tube, Pivot/Slide, Straight, Steel, Chrome (3-7/8" L) Screw, Nylon Adjustment (/2-3 x 7/8") Hinge, Footplate - Right Hinge, Footplate - Left Screw, Socket Flat Head (/4-20 x 3/4") NLA NLA Package, Screw, Socket Button Head (/4-20 x 25-7/8") Washer (/4 x 23/32 x /6") Package, Washer, Nylon (5/6 x 7/8 x /8") Washer, Nylon (/4 x 7/8 x /32") Spacer, Coved (/4 x 3/4 x /32") Spacer, Coved (/4 x /6 x /2") Washer (/4 x /2 x /6") Locknut (/4-20) Nut, Barrel, Hex Head (/4-20 x /6") 2 NOTE: A - Includes Items 2 thru 6. B - For 2-3" wide chairs C - For 4-5" wide chairs D - For 6" and wider chairs E - For PAS4A/PAL4A only. F - The footplate design was revised 9/2/2008 with rounder corners and accessory holes changed from 8 to 4. Recommended to replace in pairs to match sides. # Pivot/ Slide Tube with Footplate Assemblies Rigging Types 90 and 70MFX Footplate Assembly w/o Pivot/SlideTube 60, 60MFX, 70 PW93, PW93E AT5544, P904 (9-7/8" Tube) 60, 60MFX, 70 PW93, PW93E AT5544, P904 (-7/8" Tube) 60, 60MFX, 70 PW93, PW93E AT5544, P904 (3-7/8" Tube) PAS4A and PAL4A (3-7/8" Tube) 63

65 Adjustable Angle Footplate Assemblies - AT deg, 60deg MFX, 70deg, 70deg MFX, PW93, PW93E, 90DEG, AT5544, P904, PAS4A/PAL4A Swingaway Supports NOTE: Heel loops are not included. See footrest and legrest accessories. # Pivot/ Slide Tube with Footplate Assemblies Rigging Types 90 and 70MFX Footplate Assembly w/o Pivot/SlideTube 60, 60MFX, 70 PW93, PW93E AT5544, P904 (9-7/8" Tube) 60, 60MFX, 70 PW93, PW93E AT5544, P904 (-7/8" Tube) 60, 60MFX, 70 PW93, PW93E AT5544, P904 (3-7/8" Tube) PAS4A and PAL4A (3-7/8" Tube) 2-3" W, Right (4-/4" Footplate) 2-3" W, Left (4-/4" Footplate) 4-5" W, Right (5-/4" Footplate) 4-5" W, Left (5-/4" Footplate) 6" and Wider, Right (6-/4" Footplate) 6" and Wider, Left (6-/4" Footplate) NLA NLA 239-NLA

66 Adjustable Angle Footplate Assemblies AT5543 For AT

67 Adjustable Angle Footplate Assemblies AT5543 For AT5044 Item Number Note Part Number Description Quantity Per Package Assembly A See Chart #5 Wedge Style AT5044 Elevating Legrests Package, Plug Button, Black, "D" Shaped (3/4") Pivot/Slide Tube w/ D Insert, Black Pivot/Slide Tube w/ D Insert, Black (2" Longer) Screw, Socket Flat Head (/4-28 x 3/4") Footplate, Adjustable Angle, Large, Black (5-/4" W x 8" L) Footplate, Adjustable Angle, Extra Large, Black (6-/4" W x 8" L) Footplate, Adjustable Angle, XX- Large, Black (7-/4" W x 8" L) Bracket, Adjustable Angle Footplate, Black Locknut (/4-28) Screw, Socket Head (/4-28 x -3/4") Hinge, Adjustable Angle Footrest Attachment, Hinge Locknut (/4-28) Spacer, Hinge, Black Screw, Socket Head (5/6-8 x -/2") NOTE: A - Includes items 2-3. # Adjustable Angle Footplates w/ Pivot Tubes Wedge Style AT5044 Elevating Legrests Straight Slide Tube (0-/4") 4" - 5" Wide (5-/4" Footplate) 6" - 7" Wide (6-/4" Footplate) 8" - 24" Wide (7-/4" Footplate) Right Left ALPT Straight Slide Tube (2-/4") 4" - 5" Wide (5-/4" Footplate) 6" - 7" Wide (6-/4" Footplate) 8" - 24" Wide (7-/4" Footplate) Right Left

68 S263 One Piece Wooden Footboard and Hardware 67

69 S263 One Piece Wooden Footboard and Hardware Item Number Note Part Number Description Quantity Per Package Assembly See Chart # One Piece Wooden Footboard without Hardware A See Chart Heel Loop Hardware Packages (not shown) 2 B Kit, Wooden Footboard Mounting Hardware 3 NLA - Screw, Phillips Oval Head (#0-32 x -/2") 4 NLA - Screw, Phillips Oval Head (#0-32 x -/4") 3 5 Tube, Pivot/Slide, Chrome - Right (9-/2" L) 5 Tube, Pivot/Slide, Chrome - Left (9-/2" L) 6 Plug Button, Black (3/4") 2 7 Locknut (#0-32) 4 8 Cap, End, Tube, Black (7/8") 2 9 Lock, Pad Plate, Legrest, Black 0 Clamp, Black 2 Washer, Nylon (3/6 x 7/6 x /8") 3 2 NLA - Link, Locking, Chrome NOTE: A - Not Shown. B - Includes items 3-2 # One Piece Wooden Footboard without Hardware NOTE: When selecting a wooden footboard for PW93ST or 70 Degree Tapered Footrest, order a 3" narrower footboard to accommodate the.5" footrest taper per side. Example: 7" wide chair will use a 4" wide chair footboard. S263 option is not available for tapered footrest less than 7" wide. Footrest- Footboard w/ Heel Loop Holes Part Number NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA Footrest- Footboard w/o Heel Loop Holes Part Number 48247X003-NLA 0390-NLA 48247X NLA 48247X NLA 0393-NLA 0394-NLA 0395-NLA 0396-NLA 0397-NLA Chair Width 4" 5" 6" 7" 8" 9" 20" 2" 22" 23" 24" Footboard Width -5/8" 2-/2" 3-3/4" 4-/2" 5-9/6" 6-/2" 7-/2" 8-/2" 9-/2" 20-/2" 2-/2" Footboard Depth 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 68

70 S263 One Piece Wooden Footboard and Hardware Heel Loop Hardware Packages (not shown) (All hardware is included to attach heel loops to footboard.) Chair Width 4-5" Wide 6"-24" Wide Part Number NLA NLA Package Includes 2 each Heel Loops 4 each Screw, PPH (/4-20 x 3") 4 each Spacer (/4 x /32 x -3/4") 4 each Locknut (/4-20) 2 each Heel Loops 4 each Screw, PPH (/4-20 x 3") 4 each Spacer (/4 x /32 x -3/4") 4 each Locknut (/4-20) 69

71 Footrest and Legrest Accessories NOTE: Heel loop replacements for Power Articulating Legrest can be found on the Power Articulating Legrest page. Item Number Note Part Number Description NOTE: Quantity Per Package Assembly A Strap, Calf w/ Hook and Loop (36" L) A,C H-Strap (24" L) A,D H-Strap (26" L) A,E H-Strap (3" L) A,B Kit, 3" Extension w/ Hardware (Pair) 2 A,F Guard, Impact (8" L) 2 A See Chart Heel Loops and Hardware (Not Including AT5043/AT5543) A See Chart Attaching Hardware Part Numbers (Not Including AT5043/AT5543) A See Chart AT5043 and AT5543 Heel Loops, Heel Loops w/ Ankle Straps and Hardware A See Chart Toe Loops and Hardware A - Not Shown B - Specify frame color when ordering. See page titled "Frame Finishes and Touch-Up Paints". C - 2-4" wide seats D - 5-6" wide seats E - 7" and wider seats F - For 70 deg. Tapered Footrest. Heel Loops and Hardware (Not Including AT5043/AT5543) Footplate Type Composite Small (65) Composite Medium (65) Composite Large (65) Standard Aluminum (650) Standard Aluminum (650) Deluxe Aluminum (450) Chair Width 3-4" W or 5-7" W Tapered 5-6" W or 8-9" W Tapered 7-24" W or 20-24" W Tapered 4-5" W 6-24" W 6-24" W Heel Loop Single # Heel Loop Pair # Heel Loop w/ Ankle Strap Single # Rt. Heel Loop w/ Ankle Strap Single # Lt NLA NLA NLA NLA NLA NLA NLA NLA NLA Heel Loop w/ Ankle Strap Pair # Attaching Hardware Pair # NLA

72 Footrest and Legrest Accessories NOTE: Heel loop replacements for Power Articulating Legrest can be found on the Power Articulating Legrest page. Heel Loops and Hardware (Not Including AT5043/AT5543) Footplate Type Chair Width Heel Loop Single # Heel Loop Pair # Heel Loop w/ Ankle Strap Single # Rt. Heel Loop w/ Ankle Strap Single # Lt. Heel Loop w/ Ankle Strap Pair # Attaching Hardware Pair # X-Large Aluminum (350) 6-24" W Attaching Hardware Part Numbers (Not Including AT5043/AT5543) Footplate Type Composite (65) Standard Aluminum (650) Deluxe Aluminum (450) X-Large Aluminum (350) Part Number NLA Part Number Consists of (2) Screw, Phillips Pan Head (/4-20 x 2-/4") (2) Spacer (/4 x /32 x -3/4") (2) Hex Nut w/ Nylon Cap (/4-20) (2) Flat Washer (/4 x 5/8 x /6") (2) Screw, Phillips Pan Head (/4-20 x 2-/2") (2) Spacer (/4 x /32 x -3/4") (2) Locknut (/4-20) (2) Screw, Phillips Pan Head (/4-20 x 2-/2") (2) Spacer (/4 x /32 x -3/4") (2) Locknut (/4-20) (2) Screw, Phillips Pan Head (/4-20 x 2-/4") (2) Spacer (/4 x /32 x -3/4") (2) Locknut (/4-20) 7

73 Footrest and Legrest Accessories NOTE: Heel loop replacements for Power Articulating Legrest can be found on the Power Articulating Legrest page. AT5043 and AT5543 Heel Loops, Heel Loops w/ Ankle Straps and Hardware Footplate Type AT5043 Flip-Up and AT5543 Adj. Angle AT5043 Flip-Up and AT5543 Adj. Angle Attaching Hardware Only Part Number Kit, Heel Loop w/ Hardware, Adjustable Angle Footplate (Pair) Kit, Heel Loop w/ Ankle Strap and Hardware, Adjustable Angle Footplate (Pair) Kit, Heel Loop Attaching Hardware (Pair) Part Number Consists of (2) Heel Loops (4) Screw, PPH (/4-20 x 2-/4") (4) Spacer (4) Locknut (/4-20) (2) Heel Loops w/ Ankle Straps (4) Screw, PPH (/4-20 x 2-/4") (4) Spacer (4) Locknut (/4-20) (2) Screw, Phillips Pan Head (/4-20 x 2-/4") (2) Spacer (/4 x /32 x -3/4") (2) Hex Nut w/ Nylon Cap (/4-20) (2) Flat Washer (/4 x 5/8 x /6") Toe Loops (345) and Attaching Hardware Footplate Type 65, 650, 450, 350, Footplates AT5043 and AT5543 Footplates Toe Loop w/o Hardware Single # 04572X X025 Toe Loop w/o Hardware Pair # Attaching Hardware Part Number Attaching Hardware Consists of (4) Screw, Phillips Pan Head (0-32 x 7/8") (4) Washer (/4 x 3/4 x 3/32") (4) Locknut (0-32) (4) Screw, Phillips Pan Head (0-32 x /2") (4) Washer (/4 x 3/4 x 3/32") 72

74 Front Riggings - Adjustable Heel Loops 73

75 Front Riggings - Adjustable Heel Loops Item Number Note Part Number Description Quantity Per Package Assembly A 97 Kit, Heel Loop, Adjustable w/ Hardware (Pair) 2 Heel Loop 2 3 NLA - Spacer (/4 x /32 x -3/4") 2 4 NLA - Screw, Phillips Pan Head (/4-20 x 2-/4") 2 5 Washer, Flat (/4 x 5/8 x /6") 2 6 Nut, Hex, Nylon Cap (/4-20) 2 Instruction Sheet, Adjustable Heel Loop B 96 Kit, Heel Loop, Adjustable w/ Hardware, Deluxe 450 (Pair) 2 Heel Loop 2 3 NLA - Spacer (/4 x /32 x -3/4") 2 6 Nut, Hex, Nylon Cap (/4-20) 2 7 NLA - Screw, Phillips Pan Head (/4-20 x 2-/2") 2 Instruction Sheet, Adjustable Heel Loop NOTE: A - Kit includes items 2-6. Used with all Footplates except Deluxe (450). B - Kit includes items 2, 3, 6, and item 7. Used with Deluxe (450) Footplates only. 74

76 Power Articulating Legrest POWELR8/POWELR20 (Before 9/5/0) 75

77 Item Number Note Part Number Description A,G A,G G 7 G G 6 G 7 G 7 G B,G 35 B,H Power Articulating Legrest POWELR8/POWELR20 (Before 9/5/0) Quantity Per Package Assembly 02-NLA NLA - Legrest Support Assembly, Sector, Black - Right 03-NLA NLA - Legrest Support Assembly, Sector, Black - Left Housing, Latch - Right Housing, Latch - Left Package, Screw, Slotted Hex Washer Head (#0-32 x /2") Screw, Slotted Hex Washer Head (#0-32 x 5/8") Plug, Pivot Screw, Socket Button Head w/ Patch (/4-20 x 3/4") NLA NLA - Pad, Cushion - Right NLA NLA - Pad, Cushion - Left Bearing, Flange (/4 x 5/6" Long) Spacer, Nylon (3/8 x 7/8 x /32") Screw, Socket Button Head (/4-20 x /2") 0237 Washer, Nylon (3/8 x 7/8 x /6") Screw, Phillips Pan Head Tap (#0-32 x 3/8") Screw, Phillips Pan Head Tap (#8-32 x 3/8") NLA NLA - Screw, Phillips Pan Head (#8-32 x 5/8") NLA NLA - Bracket, Cover NLA NLA - Sleeve (5/6 x 3/8 x 7/8") NLA NLA - Cover, Legrest Support - Right NLA NLA - Cover, Legrest Support - Left Linkage Assembly, Power Leg 60285X02 Screw, Socket Flat Head (/4-20 x 2") NLA NLA - Washer, Flat (5/32 x 3/8 x /32") Screw, Socket Button (/4-20 x 3/4") Screw, Socket Button Head w/ Patch (/4-20 x 3/4") NLA NLA - Motor, Actuator Locknut (5/6-8) Locknut (5/6-8) 0267-NLA NLA - Screw, Socket Button Head (5/6-8 x -/2") NLA NLA - Screw, Socket Button Head (5/6-8 x 2-/2") NLA NLA - Block, Pivot Bearing, Flange (/4 x 3/4" Long) Nut, Hex with Nylon Cap (/4-20) Spacer, Coved (5/6 x 3/4 x 3/8") T-Nut (/4-20) NLA NLA - Pin, Roll (/8 x 3/8") 0883 Glide NLA NLA - Extrusion, Internal Slide - Short (6-3/4" L) 0404-NLA NLA - Extrusion, Internal Slide Long (8-3/4" L) 76

78 Item Number Note Part Number Description G G G G F 5 F D 62 D 63 C,E 63 C,E 63 C,E 63 C,E Power Articulating Legrest POWELR8/POWELR20 (Before 9/5/0) Quantity Per Package Assembly Glide, Internal Screw, Socket Button Head (#0-24 x 3/4") NLA NLA - Bracket, Actuator Washer (/4 x /2 x /6") Screw, Button Head w/ Patch (/4-20 x /2") NLA NLA - Bearing, Linear NLA NLA - Extrusion, External - Short (4-/2" L) NLA NLA - Extrusion, External - Long (6-/2" L) NLA NLA - Plate, Side Pivot NLA NLA - Block, Slide NLA NLA - Package, Screw, Phillips Pan Head (#0-32 x 25 2 /2") 06-NLA NLA - Calf Pad Bracket Assembly, Black X003 Pad, Legrest, Vinyl - Right X004 Pad, Legrest, Vinyl - Left Screw, Socket Head (#0-32 x -/2") Washer, Steel (3/6 x 7/6 x /6") NLA NLA - Bushing Heel Loop Assembly - Right 0269 Heel Loop Assembly - Left Locknut (/4-20) Screw, Socket Flat Head (/4-20 x 3/4") NLA NLA - Footplate, Adjustable Angle, Large, Black (5-/4" W x 8" L) Screw, Socket Button Head (/4-20 x -/2") Nut, Barrel, Hex Head (/4-20 x /6") Clamp, Footplate Hinge, Footplate - Right Hinge, Footplate - Left Screw, Nylon Adjustment (/2-3 x 7/8") Package, Washer, Nylon (5/6 x 7/8 x /8") Extrusion, Footplate Adapter 04 Footplate Assembly, Adjustable Angle, Black - Right (5-/4" W) 05 Footplate Assembly, Adjustable Angle, Black - Left (5-/4" W) NLA NLA - Legrest, Power Articulating, Sector, Black, Short (3"-8" Range) - Right NLA NLA - Legrest, Power Articulating, Sector, Black, Short (3"-8" Range) - Left NLA NLA - Legrest Assembly, Power Articulating, Sector, Black, Long (5"-20" Range) - Right NLA NLA - Legrest Assembly, Power Articulating, Sector, Black, Long (5"-20" Range) - Left 77

79 NOTE: Power Articulating Legrest POWELR8/POWELR20 (Before 9/5/0) A - Includes items 2-7 B - Includes items 32, 33, C - Power articulating legrest before 9/5/0 NLA. See power articulating legrest dated after 7/26/04. Legrest must be ordered in pairs to match. D - Includes items 32, 39, 40, 48-6 E - Includes items, 8-32,7, 4-47, 62 F - Heel loop service part was lengthened 2/3/02. Verify with customer if longer heel loop is present. Order in pairs when needed along with 2 each of items 48, 49 and 50. G - No longer available, see item 63 part numbers and H - No longer available, see item 63 part numbers and

80 Power Non-Articulating Legrest POWERLR8/POWERLR20 (9/5/0 Thru 4/30/02) 79

81 Power Non-Articulating Legrest POWERLR8/POWERLR20 (9/5/0 Thru 4/30/02) Item Number Note Part Number Description A,F A,F F 7 F F 2 F 3 F 4 F 4 F F F F 32 F 32 F F 35 Quantity Per Package Assembly 02-NLA NLA - Legrest Support Assembly, Sector, Black - Right 03-NLA NLA - Legrest Support Assembly, Sector, Black - Left Housing, Latch - Right Housing, Latch - Left Package, Screw, Slotted Hex Washer Head (# x /2") Screw, Slotted Hex Washer Head (#0-32 x 5/8") Plug, Pivot Screw, Socket Button Head w/ Patch (/4-20 x 3/4") NLA NLA - Pad, Cushion - Right NLA NLA - Pad, Cushion - Left Screw, Phillips Pan Head Tap (#0-32 x 3/8") Screw, Phillips Pan Head Tap (#8-32 x 3/8") NLA NLA - Screw, Phillips Pan Head (#8-32 x 5/8") NLA NLA - Bracket, Cover NLA NLA - Block, Slide NLA NLA - Sleeve (5/6 x 3/8 x 7/8") NLA NLA - Cover, Legrest Support - Right NLA NLA - Cover, Legrest Support - Left NLA NLA - Washer, Flat (5/32 x 3/8 x /32") NLA NLA - Motor, Actuator Locknut (5/6-8) Locknut (5/6-8) 0267-NLA NLA - Screw, Socket Button Head (5/6-8 x -/2") NLA NLA - Screw, Socket Button Head (5/6-8 x 2-/2") Spacer, Coved (5/6 x 3/4 x 3/8") T-Nut (/4-20) NLA NLA - Pin, Roll (/8 x 3/8") 0883 Glide NLA NLA - Extrusion, Internal Slide (6-3/4" L) Glide, Internal Screw, Socket Button Head (#0-24 x 3/4") NLA NLA - Bracket, Actuator Washer (/4 x /2 x /6") Screw, Button Head w/ Patch (/4-20 x /2") NLA NLA - Bearing, Linear 093-NLA NLA - Extrusion, External - Right (4-/2" L) 0932-NLA NLA - Extrusion, External - Left (4-/2" L) NLA NLA - Package, Screw, Phillips Pan Head (#0-32 x 25 2 /2") 06-NLA NLA - Calf Pad Bracket Assembly, Black X003 Pad, Legrest, Vinyl - Right 80

82 Power Non-Articulating Legrest POWERLR8/POWERLR20 (9/5/0 Thru 4/30/02) Item Number Note Part Number Description Quantity Per Package Assembly X004 Pad, Legrest, Vinyl - Left Screw, Socket Head (#0-32 x -/2") Washer, Steel (3/6 x 7/6 x /6") NLA NLA - Bushing 2 39 E 0268 Heel Loop Assembly - Right 39 E 0269 Heel Loop Assembly - Left Locknut (/4-20) Screw, Socket Flat Head (/4-20 x 3/4") NLA NLA - Footplate, Adjustable Angle, Large, Black (5-/4" W x 8" L) Screw, Socket Button Head (/4-20 x -/2") Nut, Barrel, Hex Head (/4-20 x /6") Clamp, Footplate Hinge, Footplate - Right Hinge, Footplate - Left Screw, Nylon Adjustment (/2-3 x 7/8") Package, Washer, Nylon (5/6 x 7/8 x /8") Extrusion, Footplate Adapter 50 B 04 Footplate Assembly, Adjustable Angle, Black - Right (5-/4" W) 50 B 05 Footplate Assembly, Adjustable Angle, Black - Left (5-/4" W) Screw, Socket Button Head (/4-20 x -/4") Locknut (/4-20) C,D 0933-NLA NLA - Legrest, Power Non-Articulating, Sector, Black (3"-20" Range) - Right 53 C,D 0934-NLA NLA - Legrest, Power Non-Articulating, Sector, Black (3"-20" Range) - Left NOTE: A - Includes Items 2-7 B - Includes Items 22, 29, 30, C - Includes Items, 8-35 and D - Power Non-articulating legrest NLA. See power articulating legrest dated after 7/26/04. A pair will be required to have articulation on both sides. E - Heel loop service part was lengthened 2/3/02. Verify with customer if longer heel loop is present. Order in pairs when needed along with 2 each of items 36, 37 and 38. F - No longer available, see item 53 part numbers 0933 and

83 Power Articulating Legrest ELRPW (Between 5//02-7/26/04) 82

84 Item Number Note Part Number Description A A J 8 J B C 29 C D,G 3 Power Articulating Legrest ELRPW (Between 5//02-7/26/04) Quantity Per Package Assembly 720-NLA NLA - Legrest Support Assembly, Sector, Black - Right 72-NLA NLA - Legrest Support Assembly, Sector, Black - Left Housing, Latch - Right Housing, Latch - Left Screw, Slotted Hex Washer Head w/ Patch (#0-32 x /2") Screw, Slotted Hex Washer Head (#0-32 x 5/8") Decal, Warning Pinch Point Plug, Pivot Screw, Socket Button Head w/ Patch (/4-20 x 3/4") 0968-NLA NLA - Pad, Cushion - Right 0969-NLA NLA - Pad, Cushion - Left NLA NLA - Screw, Shoulder Hex Socket Head (5/6" x 2 -/4", /4-20) Locknut (/4-20) Washer, Flat (5/6 x 5/8 x /6") Bearing, Flange (/4 x 5/6" Long) Washer (/4 x /2 x /6") Washer, Nylon (3/8 x 7/8 x /6") 0745-NLA NLA - Plate, Pivot 0746 Cover, Legrest Support - Right 0747 Cover, Legrest Support - Left Screw, Socket Button Head (/4-20 x ") Screw, Socket Button Head w/ Patch (/4-20 x 3/4") 0883 Glide Spacer, Coved (5/6 x 3/4 x 3/8") Extrusion, Internal Slide (4-/4" L) Glide, Internal Screw, Socket Button Head (#0-24 x 3/4") 0972 Actuator Motor Bracket Assembly T-Nut (/4-20) Screw, Button Head w/ Patch (/4-20 x /2") NLA NLA - Screw, Shoulder Hex Socket Head (5/6" x ", /4-20) 0724 Motor, Actuator - Right 0725 Motor, Actuator - Left Calf Pad Assembly with Hardware - Right Calf Pad Assembly with Hardware - Left X003 Pad, Legrest, Vinyl - Right X004 Pad, Legrest, Vinyl - Left 0748-NLA NLA - Hardware, Calf Pad Bracket Washer, Nylon (/4 x /2 x /6") 4 83

85 Item Number Note Part Number Description E 42 E H 46 H F,F,I 55 F,F,I Power Articulating Legrest ELRPW (Between 5//02-7/26/04) Quantity Per Package Assembly NLA NLA - Bracket, Calf Pad Mounting, Black Screw, Phillips Pan Head w/patch (#0-32 x 7/8") Locknut (/4-28) 0749-NLA NLA - Screw, Socket Flat Head (/4-28 x /2") NLA NLA - Block, Calf Pad 76 Bracket, Calf Pad Block Mounting, Black - Right 77 Bracket, Calf Pad Block Mounting, Black - Left Screw, Hex Head w/ Patch (/4-20 x /2") Bushing, Sleeve 0795-NLA NLA - Pin, Roll (5/64 x 5/8") 0734-NLA NLA - Extrusion, External - ELRPW (0-/2" L) 04 Footplate Assembly, Adjustable Angle, Black - Right (5-/4" W) 05 Footplate Assembly, Adjustable Angle, Black - Left (5-/4" W) Screw, Socket Head (#0-32 x -/2") Washer, Steel (3/6 x 7/6 x /6") NLA NLA - Bushing Heel Loop Assembly - Right 0269 Heel Loop Assembly - Left NLA NLA - Footplate, Adjustable Angle, Large, Black (5-/4" W x 8" L) Screw, Socket Flat Head (/4-20 x 3/4") Screw, Socket Button Head (/4-20 x -/2") Nut, Barrel, Hex Head (/4-20 x /6") Hinge, Footplate - Right Hinge, Footplate - Left Screw, Nylon Adjustment (/2-3 x 7/8") 0630 Washer, Nylon (5/6 x 7/8 x /8") Extrusion, Footplate Adapter 0743-NLA NLA - Legrest Assembly, Power Articulating, Sector, Black (3"-20" Range) - Right 0744-NLA NLA - Legrest Assembly, Power Articulating, Sector, Black (3"-20" Range) - Left 84

86 NOTE: Power Articulating Legrest ELRPW (Between 5//02-7/26/04) A - Includes items 2-8 B - Includes items 3, 25 and 26 C - Includes Items 25, 26 and D - Includes Items 25, 26, 3-36, 38 E - Includes Items 0, 3, 25, 26 and F - After 4/30/02 MKIV T.A.C. controller software changed from. to.2 to accommodate power articulating legrest made after 4/30/02. F - A new MKIV T.A.C. controller part number must be ordered when replacing power articulating or nonarticulating legrest made before 5//02. Verify software version before ordering. G - Not Shown H - Heel loop service part was lengthened 2/3/02. Verify with customer if longer heel loop is present. Order in pairs when needed along with 2 each of items 43, 44 and 45. I - Due to a product enhancement that provides a higher pivot point at the knee, a customer must order a complete right and left side legrest assembly. see page titled "Power Articulating Legrest After 7/26/04". J - No longer available individually. See Item number for replacement. 85

87 Power Articulating Legrest ELRPW After 7/26/04 86

88 Item Number Note Part Number Description A A B C 29 C D,F Power Articulating Legrest ELRPW After 7/26/04 Quantity Per Package Assembly Legrest Support Assembly, Sector, Black - Right Legrest Support Assembly, Sector, Black - Left Housing, Latch - Right Housing, Latch - Left Screw, Slotted Hex Washer Head w/ Patch (#0-32 x /2") Screw, Slotted Hex Washer Head (#0-32 x 5/8") Decal, Warning Pinch Point Plug, Pivot Screw, Socket Button Head w/ Patch (/4-20 x 3/4") Pad, Cushion - Right Pad, Cushion - Left NLA NLA - Screw, Shoulder Hex Socket Head (5/6" x 2 -/4", /4-20) Locknut (/4-20) Washer, Flat (5/6 x 5/8 x /6") Bearing, Flange (/4 x 5/6" Long) Washer (/4 x /2 x /6") Washer, Nylon (3/8 x 7/8 x /6") Plate, Pivot 0746 Cover, Legrest Support - Right 0747 Cover, Legrest Support - Left Screw, Socket Button Head (/4-20 x ") Screw, Socket Button Head w/ Patch (/4-20 x 3/4") 0883 Glide Spacer, Coved (5/6 x 3/4 x 3/8") Extrusion, Internal Slide (4-/4" L) Glide, Internal Screw, Socket Button Head (#0-24 x 3/4") 0972 Actuator Motor Bracket Assembly T-Nut (/4-20) Screw, Button Head w/ Patch (/4-20 x /2") NLA NLA - Screw, Shoulder Hex Socket Head (5/6" x ", /4-20) 0724 Motor, Actuator - Right 0725 Motor, Actuator - Left Calf Pad Assembly with Hardware - Right Calf Pad Assembly with Hardware - Left X003 Pad, Legrest, Vinyl - Right X004 Pad, Legrest, Vinyl - Left 0748-NLA NLA - Hardware, Calf Pad Bracket Washer, Nylon (/4 x /2 x /6") NLA NLA - Bracket, Calf Pad Mounting, Black Screw, Phillips Pan Head w/patch (#0-32 x 7/8") 2 87

89 Item Number Note Part Number Description Power Articulating Legrest ELRPW After 7/26/04 Quantity Per Package Assembly Locknut (/4-28) NLA NLA - Screw, Socket Flat Head (/4-28 x /2") NLA NLA - Block, Calf Pad Bracket, Calf Pad Block Mounting, Black - Right Bracket, Calf Pad Block Mounting, Black - Left Screw, Hex Head w/ Patch (/4-20 x /2") Bushing, Sleeve NLA NLA - Pin, Roll (5/64 x 5/8") Extrusion, External (2-/2" L) (ELRPW22 Before 7/22/04) and (ELRPW20 After 7/2/04) 42 E 04 Footplate Assembly, Adjustable Angle, Black - Right (5-/4" W) 42 E 05 Footplate Assembly, Adjustable Angle, Black - Left (5-/4" W) Screw, Socket Head (#0-32 x -/2") Washer, Steel (3/6 x 7/6 x /6") NLA NLA - Bushing Heel Loop Assembly - Right Heel Loop Assembly - Left NLA NLA - Footplate, Adjustable Angle, Large, Black (5-/4" W x 8" L) Screw, Socket Flat Head (/4-20 x 3/4") Screw, Socket Button Head (/4-20 x -/2") Nut, Barrel, Hex Head (/4-20 x /6") Hinge, Footplate - Right Hinge, Footplate - Left Screw, Nylon Adjustment (/2-3 x 7/8") Washer, Nylon (5/6 x 7/8 x /8") Extrusion, Footplate Adapter 55 G 2609 Legrest Assembly, Power Articulating, Sector, Black (3-20" Range) - Right 55 G Legrest Assembly, Power Articulating, Sector, Black (3-20" Range) - Left NOTE: A - Includes items 2-7 B - Includes items 3, 25 and 26 C - Includes Items 25, 26 and D - Includes Items 25, 26, 3-36, 38 E - Includes Items 0, 3, 25, 26 and F - Not Shown G - Power Legrest must be ordered in pairs when replacing older versions on chairs manufactured before 7/27/04 88

90 Power Articulating and Non-Articulating Legrest POWELR8/POWELR02/ELRPW Harnesses and Mounting Hardware (Before 7/5/05) Item Number Note Part Number Description Quantity Per Package Assembly 0400 Harness, ELRPW Power Legrest - Right 040 Harness, ELRPW Power Legrest - Left Screw, Socket Head (/4-20 x -3/4") Clamp, Half, Non-Threaded Locknut (#8-32) NLA NLA - Bracket, Harness Wire, Black NLA NLA - Screw, Socket Head (#8-32 x 5/8") NLA NLA - Nut, Acorn (/4-20) A 0520-NLA NLA - Kit, Power Leg Harness and Mounting 2 Hardware B NLA NLA - Tie Wrap (8" L) 0 NOTE: A - Includes items -7 B - Not Shown 89

91 Power Articulating Legrest ELRPW Harnesses and Hardware For ADJASBA Seat (After 7/4/05) 90

92 Power Articulating Legrest ELRPW Harnesses and Hardware For ADJASBA Seat (After 7/4/05) Item Number Note Part Number Description Quantity Per Package Assembly A,B NLA NLA - Kit, ELRPW Power Articulating Legrest 2 Harnesses and Mounting Hardware (Pair) 2 NLA - Screw, Socket Head (#8-32 x 5/8") 4 3 Locknut (#8-32) 4 4 T-Nut (5/6-8) 2 5 NLA - Bracket, Wire Harness, Black 4 6 Washer, Flat (5/6 x 5/8 x /6") 2 7 NLA - Screw, Hex Head w/ Patch (5/6-8 x /2") 2 8 Tie Wrap (5-5/8" L) 2 9 NLA - Harness, ELRPW Power Legrest - Right 9 NLA - Harness, ELRPW Power Legrest - Left NOTE: A - Includes items 2-9 B - On 2/28/07 the Dual Leg Actuator Module (DLIAM) harness cable that plugs into item #9 ELRPW Power Legrest Harness Assembly was lengthened from approximately 3" to 20" long to eliminate the need for the ELRPW Power Legrest Harness Assemblies 9

93 Power Articulating Legrest Kits POWELR8 (Before 9/5/0) NOTE: Power articulating legrest use sector style front rigging hangers and do not come included with kits. See page titled A.S.B.A. Seat Frame and Hardware for hanger assemblies. NOTE: Torque SP with RII electronics must be upgraded to MKIV A electronics. NOTE: For 3G bases, a new controller shroud cover may be required. See page titled Controller Shroud Covers. POWELR8 with 4-way Switch and Non Quad Link Mounting Plate Assembly NOTE: Part Number Description Quantity NLA Power Articulating See Note(s) B, A Legrest Kit NLA Legrest, Right, Short 8" See Note(s) A (3"-8" Adj. Length) NLA Legrest, Left, Short 8" See Note(s) A (3"-8" Adj. Length) 0520-NLA Power Leg Harnesses and Mounting Hardware NLA T.A.C. Controller with Hardware 0806-NLA 4-Way Switch Way Switch Mounting Plate with Hardware Cable Tie (8" Long) NLA Controller Bracket with Fastener Strips 049 Instruction Sheet, Power Articulating Legrest Kit A - Power articulating legrest and KITS before 9/5/0 are NLA. See power articulating legrest or KITS dated after 7/26/04. Legrest must be ordered in pairs to match. B - Kit includes the 9 items listed below the kit part number 92

94 Power Articulating Legrest Kits POWELR8 (Before 9/5/0) NOTE: Power articulating legrest use sector style front rigging hangers and do not come included with kits. See page titled A.S.B.A. Seat Frame and Hardware for hanger assemblies. NOTE: Torque SP with RII electronics must be upgraded to MKIV A electronics. NOTE: For 3G bases, a new controller shroud cover may be required. See page titled Controller Shroud Covers. POWELR8 with 4-way Switch and Quad Link Mounting Plate Assembly NOTE: Part Number Description Quantity NLA Power Articulating See Note(s) B, A Legrest Kit NLA Legrest, Right, Short 8" See Note(s) A (3"-8" Adj. Length) NLA Legrest, Left, Short 8" See Note(s) A (3"-8" Adj. Length) 0520-NLA Power Leg Harnesses and Mounting Hardware NLA T.A.C. Controller with Hardware 0806-NLA 4-Way Switch Way Switch Mounting Plate with Hardware Cable Tie (8" Long) NLA Controller Bracket with Fastener Strips 049 Instruction Sheet, Power Articulating Legrest Kit A - Power articulating legrest and KITS before 9/5/0 are NLA. See power articulating legrest or KITS dated after 7/26/04. Legrest must be ordered in pairs to match. B - Kit includes the 9 items listed below the kit part number 93

95 Power Articulating Legrest Kits POWELR20 (Before 9/5/0) NOTE: Power articulating legrest use sector style front rigging hangers and do not come included with kits. See page titled A.S.B.A. Seat Frame and Hardware for hanger assemblies. NOTE: Torque SP with RII electronics must be upgraded to MKIV A electronics. NOTE: For 3G bases, a new controller shroud cover may be required. See page titled Controller Shroud Covers. POWELR20 with 4-way Switch and Non Quad Link Mounting Plate Assembly NOTE: Part Number Description Quantity 0425-NLA Power Articulating See Note(s) B, A Legrest Kit NLA Legrest, Right, Long 20" See Note(s) A (5"-20" Adj. Length) NLA Legrest, Left, Long 20" See Note(s) A (5"-20" Adj. Length) 0520-NLA Power Leg Harnesses and Mounting Hardware NLA T.A.C. Controller with Hardware 0806-NLA 4-Way Switch Way Switch Mounting Plate with Hardware Cable Tie (8" Long) NLA Controller Bracket with Fastener Strips 049 Instruction Sheet, Power Articulating Legrest Kit A - Power articulating legrest and KITS before 9/5/0 are NLA. See power articulating legrest or KITS dated after 7/26/04. Legrest must be ordered in pairs to match. B - Kit includes the 9 items listed below the kit part number 94

96 Power Articulating Legrest Kits POWELR20 (Before 9/5/0) NOTE: Power articulating legrest use sector style front rigging hangers and do not come included with kits. See page titled A.S.B.A. Seat Frame and Hardware for hanger assemblies. NOTE: Torque SP with RII electronics must be upgraded to MKIV A electronics. NOTE: For 3G bases, a new controller shroud cover may be required. See page titled Controller Shroud Covers. POWELR20 with 4-way Switch and Quad Link Mounting Plate Assembly NOTE: Part Number Description Quantity NLA Power Articulating See Note(s) A, B Legrest Kit NLA Legrest, Right, Long 20" See Note(s) A (5"-20" Adj. Length) NLA Legrest, Left, Long 20" See Note(s) A (5"-20" Adj. Length) 0520-NLA Power Leg Harnesses and Mounting Hardware NLA T.A.C. Controller with Hardware 0806-NLA 4-Way Switch NLA 4-Way Switch Mounting Plate with Hardware Cable Tie (8" Long) NLA Controller Bracket with Fastener Strips 049 Instruction Sheet, Power Articulating Legrest Kit A - Power articulating legrest and KITS before 9/5/0 are NLA. See power articulating legrest or KITS dated after 7/26/04. Legrest must be ordered in pairs to match. B - Kit includes the 9 items listed below the kit part number 95

97 Power NON-Articulating Legrest Kits POWELR8/POWELR20 (9/5/0 thru 4/30/02) NOTE: Power NON-articulating legrest use sector style front rigging hangers and do not come included with kits. See page titled A.S.B.A. Seat Frame and Hardware for hanger assemblies. NOTE: Torque SP with RII electronics must be upgraded to MKIV A electronics. NOTE: For 3G bases, a new controller shroud cover may be required. See page titled Controller Shroud Covers. POWELR8/ POWELR20 with 4-way Switch and Non Quad Link Mounting Plate Assembly. NOTE: Part Number Description Quantity 0937-NLA Power Non-Articulating See Note(s) B, A Legrest Kit 0933-NLA Legrest, Right See Note(s) A (3"-20" Adj. Length) 0934-NLA Legrest, Left See Note(s) A (3"-20" Adj. Length) 0520-NLA Power Leg Harnesses and Mounting Hardware NLA T.A.C. Controller with Hardware 0806-NLA 4-Way Switch Way Switch Mounting Plate with Hardware Cable Tie (8" Long) NLA Controller Bracket with Fastener Strips 049 Instruction Sheet, Power Articulating Legrest Kit A - Power NON-articulating legrest and KITS before 9/5/0 are NLA. See power articulating legrest or KITS dated after 7/26/04. Legrest must be ordered in pairs to match. B - Kit includes the 9 items listed below the kit part number 96

98 Power NON-Articulating Legrest Kits POWELR8/POWELR20 (9/5/0 thru 4/30/02) NOTE: Power NON-articulating legrest use sector style front rigging hangers and do not come included with kits. See page titled A.S.B.A. Seat Frame and Hardware for hanger assemblies. NOTE: Torque SP with RII electronics must be upgraded to MKIV A electronics. NOTE: For 3G bases, a new controller shroud cover may be required. See page titled Controller Shroud Covers. POWELR8/ POWELR20 with 4-way Switch and Quad Link Mounting Plate Assembly NOTE: Part Number Description Quantity 0938-NLA Power Non-Articulating See Note(s) A, B Legrest Kit 0933-NLA Legrest, Right See Note(s) A (3"-20" Adj. Length) 0934-NLA Legrest, Left See Note(s) A (3"-20" Adj. Length) 0520-NLA Power Leg Harnesses and Mounting Hardware NLA T.A.C. Controller with Hardware 0806-NLA 4-Way Switch Way Switch Mounting Plate with Hardware Cable Tie (8" Long) NLA Controller Bracket with Fastener Strips 049 Instruction Sheet, Power Articulating Legrest Kit A - Power NON-articulating legrest and KITS before 9/5/0 are NLA. See power articulating legrest or KITS dated after 7/26/04. Legrest must be ordered in pairs to match. B - Kit includes the 9 items listed below the kit part number 97

99 Power Articulating Legrest Kits ELRPW (5//02-7/26/04) NOTE: Power articulating legrest use sector style front rigging hangers and do not come included with kits. See page titled A.S.B.A. Seat Frame and Hardware for hanger assemblies. NOTE: Torque SP with RII electronics must be upgraded to MKIV A electronics. NOTE: For 3G bases, a new controller shroud cover may be required. See page titled Controller Shroud Covers. ELRPW with 4-Way Switch and Non-Quad Link Mounting Plate Assembly NOTE: Part Number Description Quantity 906-NLA See Note(s) A, B, B Kit, ELRPW Power Articulating Legrest Kit 0743-NLA Legrest, Right See Note(s) B, B (3"-20" Adj. Length) 0744-NLA Legrest, Left See Note(s) B, B (3"-20" Adj. Length) 0520-NLA Power Leg Harnesses and Mounting Hardware NLA T.A.C. Controller with Hardware 0806-NLA 4-Way Switch Way Switch Mounting Plate with Hardware Cable Tie (8" Long) NLA Controller Bracket with Fastener Strips 049 Instruction Sheet, Power Articulating Legrest Kit A - Kit includes the 9 items listed below the kit part number B - Due to a product enhancement that provides a higher pivot point at the knee, a customer must order a complete right and left side legrest assembly. A kit is required when ordering Power Articulating Legrest for the first time. B - See page titled "Power Articulating Legrest Kits After 7/26/04". 98

100 Power Articulating Legrest Kits ELRPW (5//02-7/26/04) NOTE: Power articulating legrest use sector style front rigging hangers and do not come included with kits. See page titled A.S.B.A. Seat Frame and Hardware for hanger assemblies. NOTE: Torque SP with RII electronics must be upgraded to MKIV A electronics. NOTE: For 3G bases, a new controller shroud cover may be required. See page titled Controller Shroud Covers. ELRPW with 4-Switch and Quad Link Mounting Plate Assembly NOTE: Part Number Description Quantity 724-NLA See Note(s) B, B Kit, ELRPW Power Articulating Legrest Kit 0743-NLA Legrest, Right See Note(s) B, B (3"-20" Adj. Length) 0744-NLA Legrest, Left See Note(s) B, B (3"-20" Adj. Length) 0520-NLA Power Leg Harnesses and Mounting Hardware NLA T.A.C. Controller with Hardware 0806-NLA 4-Way Switch Way Switch Mounting Plate with Hardware Cable Tie (8" Long) NLA Controller Bracket with Fastener Strips 049 Instruction Sheet, Power Articulating Legrest Kit B - Due to a product enhancement that provides a higher pivot point at the knee, a customer must order a complete right and left side legrest assembly. A kit is required when ordering Power Articulating Legrest for the first time. B - See page titled "Power Articulating Legrest Kits After 7/26/04". 99

101 Power Articulating Legrest Kits ELRPW (After 7/26/04) NOTE: Power articulating legrest use sector style front rigging hangers and do not come included with kits. See page titled A.S.B.A. Seat Frame and Hardware for hanger assemblies. NOTE: Torque SP with RII electronics must be upgraded to MKIV A electronics. NOTE: For 3G bases, a new controller shroud cover may be required. See page titled Controller Shroud Covers. ELRPW with 4-Way Switch and Non-Quad Link Mounting Plate Assembly NOTE: Part Number Description Quantity NLA Power Articulating Legrest Kit See Note(s) A 2609 Legrest, Right (3"-20" Adj. Length) Legrest, Left (3"-20" Adj. Length) 0520-NLA Power Leg Harnesses and Mounting Hardware NLA T.A.C. Controller with Hardware 0806-NLA 4-Way Switch Way Switch Mounting Plate with Hardware Cable Tie (8" Long) NLA Controller Bracket with Fastener Strips 049 Instruction Sheet, Power Articulating Legrest Kit A - Kit includes the 9 items listed below the kit part number 00

102 Power Articulating Legrest Kits ELRPW (After 7/26/04) NOTE: Power articulating legrest use sector style front rigging hangers and do not come included with kits. See page titled A.S.B.A. Seat Frame and Hardware for hanger assemblies. NOTE: Torque SP with RII electronics must be upgraded to MKIV A electronics. NOTE: For 3G bases, a new controller shroud cover may be required. See page titled Controller Shroud Covers. ELRPW with 4-Switch and Quad Link Mounting Plate Assembly Part Number Description Quantity NLA Power Articulating Legrest Kit 2609 Legrest, Right (3"-20" Adj. Length) Legrest, Left (3"-20" Adj. Length) 0520-NLA Power Leg Harnesses and Mounting Hardware NLA T.A.C. Controller with Hardware 0806-NLA 4-Way Switch Way Switch Mounting Plate with Hardware Cable Tie (8" Long) NLA Controller Bracket with Fastener Strips 049 Instruction Sheet, Power Articulating Legrest Kit 0

103 MK6i Electronics 02

104 Dual Legs Integrated Actuator Module (DLIAM) MK6i For ELRPW Front Riggings 03

105 Dual Legs Integrated Actuator Module (DLIAM) MK6i For ELRPW Front Riggings Item Number Note Part Number Description Quantity Per Package Assembly A,B Module, Dual Legs Integrated Actuator (DLIAM) - MK6i (54" L) Screw, Phillips Pan Head (#4-40 x /2") 2 NOTE: A - The Dual Legs Integrated Actuator Module is attached to a 2"-6" wide seat pan in the same way when ELRPW Front Riggings are ordered with MK6i electronics B - On 2/28/07 the Dual Leg Actuator Module (DLIAM) harness cable lengthened from approximately 3" to 20" long to eliminate the need for the ELRPW Power Legrest Harness Assembly part numbers RT and LT 04

106 MKIV Joysticks RII, TCHJOY, A, A+ 05

107 MKIV Joysticks RII, TCHJOY, A, A+ Item Number Description RII TCHJOY A A+ See Pictorial Joystick NLA Assembly See Note(s) D NLA NLA NLA Knob, Joystick Skirt, Joystick Inductive, NLA NLA NLA Joystick See Note(s) A See Note(s) B See Note(s) A 3 Inductive, NLA Joystick See Note(s) C 4 Boot, Joystick 50000X364-NLA 50000X364-NLA 50000X364-NLA 5 Overlay, Joystick Decal NLA NLA 6 Cable NLA NLA Assembly See Note(s) B See Note(s) A 6 Cable NLA Assembly See Note(s) C 7 Potentiometer, NLA NLA Speed See Note(s) A See Note(s) B 7 Potentiometer, 558-NLA Speed See Note(s) C 8 Knob, Potentiometer NLA NLA NLA 9 Switch, On/Off Momentary See Note(s) B See Note(s) A 9 Switch, On/Off 5523-NLA Momentary See Note(s) C 0 Switch, NLA Program See Note(s) A Switch, Toggle SPDT See Note(s) A 2 Decal, RII 80 AMP NLA NOTE: A - Item requires soldering B - Before 0/0/02 item requires soldering C - After 9/30/02 item has a non-soldering connector D - RII 80 amp. decal is not included with joystick. Used on Torque SP's after 0/3/0. 06

108 MKIV Joysticks - PSF and PSR NOTE: PSR STANDARD joystick configuration below show the on/off switch on the left side for part # When the on/off switch is required on the right side, refer to part number and order as a configurated part. 07

109 MKIV Joysticks - PSF and PSR NOTE: PSR STANDARD joystick configuration below show the on/off switch on the left side for part # When the on/off switch is required on the right side, refer to part number and order as a configurated part. Item Number Description PSF PSR See Pictorial Joystick Assembly NLA See Pictorial Joystick Assembly NLA See Pictorial Joystick Assembly NLA See Pictorial Joystick Assembly NLA See Pictorial Joystick Assembly NLA Knob, Joystick Skirt, Joystick Inductive, Joystick NLA NLA 4 Boot, Joystick 50000X364-NLA 50000X364-NLA 5 Overlay, Joystick Decal NLA NLA 6 Cable Assembly NLA NLA 7 Potentiometer, Speed NLA NLA 8 Knob, Potentiometer NLA NLA 9 Switch, On/Off Momentary Switch, Push Button NLA NLA SPST Momentary Switch, Push Button SPST NLA 2 Boot, Switch NLA NLA 3 Boot, Switch NLA NLA 08

110 MKIV Joystick Mounting Hardware and Joystick Accessories NOTE: Captain Seat joystick tube mounting hardware adapts to the offset joystick tube and comes standard on-chair. 09

111 MKIV Joystick Mounting Hardware and Joystick Accessories NOTE: Captain Seat joystick tube mounting hardware adapts to the offset joystick tube and comes standard on-chair. Item Number Note Part Number Description Quantity Per Package Assembly A NLA NLA - Kit, Straight Joystick Tube with Hardware 2 B Kit, /2" Offset Joystick Tube with Hardware Plug Button, Black (7/8") Screw, Phillips Pan Head (#4-40 x 3/8") NLA NLA - Package, Tie Wrap (-/2" L) Spacer, Joystick Tube, Black Screw, Phillips Pan Head (#0-32 x -/8") 2 8 C NLA NLA - Hardware, Joystick Tube Mounting 9 D Clamp, Fixed Height Joystick Tube 9 F Clamp, Height Adjustable Joystick Tube (ARM250) NLA NLA - Half Clamp, Threaded Holes Half Clamp, Non-Threaded Holes Adjustment Lock Assemnbly, Black NLA NLA - Bracket, Joystick Mounting, Black X004-NLA NLA - Screw, Hex Head (/4-20 x -/8") 3 5 E NLA NLA - Kit, Joystick Tube Mounting Hardware - Captain/ Van Seat Locknut (/4-20) NLA NLA - Spacer (/4 x 7/6 x 5/8") Clamp Assembly, Fixed Height, Captain/ Van Seat Screw, Hex Head (/4-20 x -/4") NLA NLA - Kit, Toggle Switch Extension NLA NLA - Screw, Phillips Round Head (#0-32 x 3/8") 3 G Extension, Joystick, "T" Style (560) (4" W x 5-/2" L) G Extension, Joystick, Straight Style (56) (/2" W x 5" L) NOTE: A - Includes items 3 and 4 B - Includes items 3, 5, 6 and 7. Used for MKIV RII. A, A+, PSF/PSR joysticks (Captain Seats also) C - Includes items 0-4. Used for TCHJOY Touchpad "A" Joystick before 0/4/00 D - For MKIV RII. A, A+, PSF/PSR joystick and (TCHJOY Touchpad "A" Joystick after 0/3/00). Joystick Tube Clamp can be used as a direct replacement for item 8 part # in the field. Individual components are non-saleable. E - Includes items 6-9. Due to product improvement, the joystick mounting bracket with a separate adjustment lock were replaced with the clamp assembly shown as of 2/20/03 and is backward compatible. F - Introduced 0/3/05 as option (ARM250) and can be used to replace a Fixed Height Joystick Tube Clamp in the field. Individual components are non-saleable. G - Not Shown 0

112 MKIV Swivel Joystick Hardware Item Number Note Part Number Description Quantity Per Package Assembly Spacer, Joystick Tube, Black NLA NLA - Package, Screw, Phillips Pan Head (#0-32 x /8") NLA NLA - Bracket, Swivel Joystick, MKIV NLA NLA - Bracket, Swivel Joystick with Hardware NLA NLA - Joystick Swivel Tube with Hardware, Black NLA NLA - Washer, Flat (/4 x 3/8 x /6") NLA NLA - Bushing NLA NLA - Spring, Hitch Bracket NLA NLA - Knob, Clamping, Grey NLA NLA - Tube, Swivel Joystick, Black Plug Button, Black (7/8")

113 MKIV Mid-Line Swing Bracket Assembly NOTE: Joystick with 90 degree bend replaces the standard tube when joysticks PSF, PSR and (RII part number 09260) are used. Joystick tube with 90 degree bend must be ordered as a special when a replacement is needed. Item Number Note Part Number Description Quantity Per Package Assembly NLA NLA - Tube, Adjustment, Inside, Mid-Line, Black NLA NLA - Spring, Extension (9/6 x -3/8" L) NLA NLA - Tube, Adjustment, Outside, Mid-Line, Black Adjustment Lock Assemnbly, Black 5 B NLA NLA - Swing Bracket Assembly, Mid-Line, Black NLA NLA - Screw, Hex Head (/4-20 x -/8") Adjustment Lock Assemnbly, Black 8 A NLA NLA - Bracket, Joystick Mounting, Black Half Clamp, Non-Threaded Holes NLA NLA - Half Clamp, Threaded Holes A,C NLA NLA - Hardware, Attaching - Mid-Line NOTE: A - Left side joystick mounting bracket or hardware must be ordered as a special. B - Includes items -4 C - Includes items 6-0 2

114 Quad Link Assembly (Before 0/3/05 - ASBA) (Before 4/07/06 - Captain Seat) 3

115 Quad Link Assembly (Before 0/3/05 - ASBA) (Before 4/07/06 - Captain Seat) Item Number Note Part Number Description A A B,E B Quantity Per Package Assembly NLA NLA - Kit, Quad Link Assembly - Right NLA - Ball Plunger Assembly with Lock Washer 2 Locknut (#0-32) 2 NLA - Screw, Cap, Socket Head (#0-32 x /2") 4 NLA - Bushing, Bronze (3/6 x /4 x /4") 4 Screw, Phillips Pan Head (#0-32 x -/8") 4 Spacer, Joystick Tube, Black NLA - Stud Plate, Quad Link Screw, Hex Head (/4-20 x -/2") 3 Spacer (/4 x 3/8 x 3/6") 3 Half Clamp, Non-Threaded Holes NLA - Half Clamp, Threaded Holes 5372-NLA NLA - Kit, Quad Link Assembly - Left NLA - Ball Plunger Assembly with Lock Washer 2 Locknut (#0-32) 2 NLA - Screw, Cap, Socket Head (#0-32 x /2") 4 NLA - Bushing, Bronze (3/6 x /4 x /4") 4 Screw, Phillips Pan Head (#0-32 x -/8") 4 Spacer, Joystick Tube, Black NLA - Stud Plate, Quad Link Screw, Hex Head (/4-20 x -/2") 3 Spacer (/4 x 3/8 x 3/6") 3 Half Clamp, Non-Threaded Holes NLA - Half Clamp, Threaded Holes NLA Kit, Quad Link Assembly - Right NLA - Ball Plunger Assembly with Lock Washer 2 Locknut (#0-32) 2 NLA - Screw, Cap, Socket Head (#0-32 x /2") 4 NLA - Bushing, Bronze (3/6 x /4 x /4") 4 Plate, Stud, Quad Link For 556 Heavy Duty Joystick Screw, Hex Head (/4-20 x -/2") 3 Spacer (/4 x 3/8 x 3/6") 3 Half Clamp, Non-Threaded Holes NLA - Half Clamp, Threaded Holes Screw, Phillips Flat Head (#0-32 x -/8") NLA NLA - Kit, Quad Link Assembly - Left NLA - Ball Plunger Assembly with Lock Washer 2 Locknut (#0-32) 2 NLA - Screw, Cap, Socket Head (#0-32 x /2") 4 NLA - Bushing, Bronze (3/6 x /4 x /4") 4 4

116 Quad Link Assembly (Before 0/3/05 - ASBA) (Before 4/07/06 - Captain Seat) Item Number Note Part Number Description Quantity Per Package Assembly 8 Plate, Stud, Quad Link For 556 Heavy Duty Joystick 9 Screw, Hex Head (/4-20 x -/2") 3 0 Spacer (/4 x 3/8 x 3/6") 3 Half Clamp, Non-Threaded Holes 2 NLA - Half Clamp, Threaded Holes 3 Screw, Phillips Flat Head (#0-32 x -/8") 2 C NLA NLA - Kit, Quad Link Assembly - Right For TCHJOY/TCPDM4 Touchpad 2 NLA - Ball Plunger Assembly with Lock Washer 2 3 Locknut (#0-32) 2 4 NLA - Screw, Cap, Socket Head (#0-32 x /2") 4 5 NLA - Bushing, Bronze (3/6 x /4 x /4") 4 6 Screw, Phillips Pan Head (#0-32 x -/8") 2 8 NLA - Plate, Stud, Quad Link MKIV TCHJOY/TCPDM4 9 Screw, Hex Head (/4-20 x -/2") 3 0 Spacer (/4 x 3/8 x 3/6") 3 Half Clamp, Non-Threaded Holes 2 NLA - Half Clamp, Threaded Holes 4 NLA - Screw, Phillips Flat Head Countersunk (# x 3/8") D NLA NLA - Kit, Quad Link Assembly - Right For Van Seats 2 NLA - Ball Plunger Assembly with Lock Washer 2 3 Locknut (#0-32) 2 4 NLA - Screw, Cap, Socket Head (#0-32 x /2") 4 5 NLA - Bushing, Bronze (3/6 x /4 x /4") 4 6 Screw, Phillips Pan Head (#0-32 x -/8") 4 7 Spacer, Joystick Tube, Black 8 NLA - Stud Plate, Quad Link 5 Locknut (/4-20) 3 6 Screw, Hex Head (/4-20 x -/2") 3 7 NLA - Spacer (/4 x 7/6 x 5/8") NLA NLA - Ball Plunger Assembly with Lock Washer 2 NOTE: A - Includes the Quad Link, items 2-2 and used with MKIV RII, A, A+,PSF/PSR joysticks B - Includes the Quad Link, items 2-5 and 8-3 and used with a 556 Heavy Duty joystick C - Includes the Quad Link, items 2-6, 8-2, 4 and used with TCHJOY/TCPDM4 joysticks. For left side mounted Quad Link, order as a special D - Includes the Quad Link, items 2-8, 5-7 and used with MKIV RII, A, A+,PSF/PSR joysticks. For left side mounted Quad Link, order as a special E - Quad Link Assembly is no longer available. Please see Quad Link Assembly (After 0/30/05 & 4/06/06) category and use new Quad LInk design as a replacement. 5

117 Quad Link Assembly (QLA) & (QL) QLA (After 0/30/05 - ASBA), QL (After 4/06/06 - Captain Seat) When converting an old style Quad Link that attaches to a mounting plate or (a Flex or Touch Pad Joystick Tube) is currently on the chair then order the following for: a) ASBA Seat; Quad Link Mtg. Hdwr. (item 4), Quad Link (item ) & Ht. Adj. Joystick Tube Clamp (item ) b) Van Seat; Quad Link Mtg. Hdwr. (item 2), Quad Link (item ) & Joystick Tube Clamp (item 22) NOTE: Substitute (item 4 & 2) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently on the chair. Additional Joystick Mtg. Hdwr. must be ordered when a 556 Heavy Duty or TCPD Touch Pad is used. 6

118 Quad Link Assembly (QLA) & (QL) QLA (After 0/30/05 - ASBA), QL (After 4/06/06 - Captain Seat) When converting an old style Quad Link that attaches to a mounting plate or (a Flex or Touch Pad Joystick Tube) is currently on the chair then order the following for: a) ASBA Seat; Quad Link Mtg. Hdwr. (item 4), Quad Link (item ) & Ht. Adj. Joystick Tube Clamp (item ) b) Van Seat; Quad Link Mtg. Hdwr. (item 2), Quad Link (item ) & Joystick Tube Clamp (item 22) NOTE: Substitute (item 4 & 2) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently on the chair. Additional Joystick Mtg. Hdwr. must be ordered when a 556 Heavy Duty or TCPD Touch Pad is used. Item Number Note Part Number Description I I 2 A 3 B 4 C,C J 2 C,G,H,H D E F Quantity Per Package Assembly Quad Link w/ Adjustable Joystick Tray (QLA) and Instruction Sheet - Right Quad Link w/ Adjustable Joystick Tray (QLA) and Instruction Sheet - Left Quad Link (QL) with Instruction Sheet - Right Quad Link (QL) with Instruction Sheet - Left Kit, Quad Link Latch Hardware Kit, Quad Link Screw Fastener Hardware 3946 Kit, ASBA/ADJASBA Quad Link Mounting Hardware Screw, Phillips Pan Head w/ Patch (#0-32 x 3/4") 2 Screw, Phillips Pan Head (#0-32 x -/8") 2 Tie Wrap (-/2" L) Spacer, Joystick Tube, Black Tube, Joystick Offset (/2") Plug Button, Black (7/8") 0544 Screw, Phillips Pan Head w/ Patch (#0-32 x 3/4") Clamp, Height Adjustable Joystick Tube (ARM250) 4304-NLA NLA - Kit, Quad Link Mounting Hardware - Van Seat Plug Button, Black (7/8") Locknut (/4-20) 3 Tube, Joystick Offset (2") Tie Wrap (-/2" L) NLA - Spacer (/4 x 7/6 x 5/8") 3 Screw, Hex Head (/4-20 x -/4") 3 Screw, Phillips Pan Head (#0-32 x -/8") 2 Spacer, Joystick Tube, Black Screw, Phillips Pan Head w/ Patch (#0-32 x 3/4") Clamp Assembly, Fixed Height, Captain/ Van Seat NLA Kit, 556 Heavy Duty Joystick To Quad Link Mounting Hardware Screw, Phillips Pan Head (#0-32 x /2") 2 NLA - Plate, 556 HD Joystick Quad Link NLA NLA - Kit, TCPD Touch Pad To Quad Link Mounting Hardware Plate, TCPD Touch Pad Quad Link Screw, Phillips Pan Head (#4-40 x 3/8") Instruction Sheet, Quad Link 7

119 Quad Link Assembly (QLA) & (QL) QLA (After 0/30/05 - ASBA), QL (After 4/06/06 - Captain Seat) When converting an old style Quad Link that attaches to a mounting plate or (a Flex or Touch Pad Joystick Tube) is currently on the chair then order the following for: a) ASBA Seat; Quad Link Mtg. Hdwr. (item 4), Quad Link (item ) & Ht. Adj. Joystick Tube Clamp (item ) b) Van Seat; Quad Link Mtg. Hdwr. (item 2), Quad Link (item ) & Joystick Tube Clamp (item 22) NOTE: Substitute (item 4 & 2) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently on the chair. Additional Joystick Mtg. Hdwr. must be ordered when a 556 Heavy Duty or TCPD NOTE: Touch Pad is used. A - Latch Kit includes 4 ea. Button Head Cap Screws (0-32 x 3/8"), 2 ea. Latch Spring Assembly, 4 ea. Phillips Flat C'Sunk Head Screws, 2 ea. Spring Catch Plates, 2 ea. Socket Head Set Screws (0-32 x 3/8") B - Screw Fastener Kit includes 4 ea. Socket Head Shoulder Screws (3/8 x 3/8"), 2 ea. Socket Head Cap Screws (/4-20 x 3/8"), 2 ea. Socket Head Set Screws (/4-20 x /2"), 4 ea. Socket Head Set Screws (0-32 x /8") C - Includes items 5-0. The Quad Link Mounting Hardware accommodates MKIV RX, A, A+ and PSF/PSR joysticks. C - When ordering the Quad Link for the first time, Additional hardware is required for 556 Heavy Duty and TCPD Touch Pad joysticks. See pictorial for reference. D - Includes items 24 and 25 E - Includes items 27 and 28 F - Not Shown G - Includes items 3-2. The Quad Link Mounting Hardware accommodates MKIV RX, A, A+ and PSF/PSR joysticks. H - If Quad Link is to be mounted on chairs w/ van seats built Before 4/07/06, then the Armrest Attach. Hdwr. (07420) for 8" wide or (097) for 20" & 22" wide must be ordered as well. H - See page titled "Captain Seat Arms and Hardware" page. The new armrest plates have 3 additional holes drilled so that the quad link can be properly mounted. I - Use with Captain Seats only J - Individual components are non-saleable 8

120 MKIV Controllers, Programmer and Hardware MKIV Quad Pulse, RII Retro and RII 80 Amp 9

121 MKIV Controllers, Programmer and Hardware MKIV Quad Pulse, RII Retro and RII 80 Amp Item Number Note Part Number Description A 2 A,C,F 3 B,D,G E 0 F G 2 H 3 I O J 25 K L,N L,N L,N M,N N,P N N N N N N N N N Quantity Per Package Assembly NLA NLA - Controller, MKIV Quad Pulse NLA NLA - Controller, MKIV RII, Retro 0689-NLA NLA - Controller, MKIV RII (80 AMP) See Chart Controller Mounting Bracket with Hardware NLA NLA - Bracket w/ Fastener Strips, Controller Mounting NLA NLA - Kit, Controller Mounting Bracket with Fastener Strips, Black NLA NLA - Bracket, Controller Mounting, Black Bracket with Fastener Strips, Controller Mounting NLA NLA - Bracket, Controller Mounting, Black NLA NLA - Screw (#8-32 x /2") Screw, Hex Head w/ Patch (5/6-8 x ") NLA NLA - Washer, Lock Tooth (3/6 x 3/8 x /32") NLA NLA - Wire, Grounding Jumper Strap E.S.D NLA NLA - Washer, Internal Tooth (M8) NLA NLA - Fastener, Hook with Adhesive Back (" W x 2 " L) NLA NLA - Package, Fastener, Dual Lock 250 (/2" W x 0 7/8" L) Locknut (#0-32) Washer, Flat (5/6 x 5/8 x /6") NLA NLA - Screw, Socket Head Cap (5/6-8 x /2") NLA NLA - Programmer, Remote Switch, Red Flex Ribbon (Tape) Reset Kit, Switch, Black Egg Reset w/ Hook/Loop Adhesive Back Fastener & Attaching Screws (EGSBLK) NLA NLA - Harness, Battery (22NF) NLA NLA - Harness, Battery (GP24) NLA NLA - Decal, RII 80 Amp 0592-NLA NLA - Kit, Electro Static Discharge Ground Strap - MKIV 0593-NLA NLA - Instruction Sheet, E.S.D. Strap Kit MKIV Cable, Virtual Service, Charger/Modem NLA NLA - Virtual Service Modem Kit 0963-NLA NLA - Virtual Service Software Kit 0305-NLA NLA - MKIV One 2 One Software Kit 0467-NLA NLA - Printer and Interface NLA NLA - Disk, 3.5 H.D. Floppy with V.S. Software NLA NLA - Adaptor, Null Modem NLA NLA - Service Manual - V.S. Software Kit NLA NLA - Paper, Printer 20

122 MKIV Controllers, Programmer and Hardware MKIV Quad Pulse, RII Retro and RII 80 Amp Item Number Note Part Number Description NOTE: Quantity Per Package Assembly N NLA NLA - Harness, Printer Wiring A - It is recommended that an E.S.D. ground strap kit part number 0592 be ordered when a new controller is needed for chairs built before 4/2/0. MKIV Quad Pulse Controller is also used for 3GTQ-TS models also B - Battery harness (part number for 22NF batteries) or (part number for GP 24 batteries) must be present when the RII 80 AMP controller is used. RII 80 Amp. joystick decal part number is also used. C - Used for Torque SP before /0/0 D - Used on Torque SP after 0/3/0 E - Comes packaged in item 4 Controller Mounting Bracket with Hardware. See chart for Bracket application F - Comes packaged in item 5 Controller Mounting Bracket with Hardware. See chart for Bracket application G - Comes packaged in item 6 Controller Mounting Bracket with Hardware. See chart for Bracket application H - Comes packaged in item 7 Controller Mounting Bracket with Hardware. See chart for Bracket application I - Comes packaged in item 8 Controller Mounting Bracket with Hardware. See chart for Bracket application J - Before 5/24/04 K - After 5/23/04. The Egg Reset Switch replaced the Red Flex Ribbon (Tape) Reset Switch L - Required when a MKIV RII 80 Amp. Controller is used M - Includes items 4-7 and Instruction Sheet N - Not Shown O - Part # is no longer available as a service part individually. Must order a complete Controller Mounting Bracket w/ Hardware Kit as a replacement. P - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. Seating System Item #'s 4-8 Controller Mounting Bracket with Hardware Item #4 Controller Mounting Item #5 Controller Mounting Item #6 Controller Mounting Bracket with HardwareBracket with HardwareBracket with Hardware Item #7 and #8 Controller Mounting Bracket with Hardware For TRRO/TRBKTS Option Van Seat with one NLA controller See Note(s) A ASBA/ADJASBA w/ NLA NLA one controller See Note(s) A See Note(s) F, D ASBA/ADJASBA with NLA NLA two controllers See Note(s) B See Note(s) F, E ASBA/ADJASBA with two controllers, shock NLA NLA forks and short base together as of 5/20/02 See Note(s) B See Note(s) E, G ESS6-STM (Elevating NLA Seat) with one controller See Note(s) A ESS6-STM (Elevating NLA Seat) with two controllers See Note(s) B ESS-PTO with two NLA controllers See Note(s) B 2

123 MKIV Controllers, Programmer and Hardware MKIV Quad Pulse, RII Retro and RII 80 Amp Item #'s 4-8 Controller Mounting Bracket with Hardware Seating System Item #4 Controller Mounting Item #5 Controller Mounting Item #6 Controller Mounting Bracket with HardwareBracket with HardwareBracket with Hardware Item #7 and #8 Controller Mounting Bracket with Hardware For TRRO/TRBKTS Option ESS-PTO with two controllers, shock NLA forks and short base together as of 5/20/02 See Note(s) B Power Tilt Only (PTO) 0732-NLA with one controller See Note(s) C 2GT with one NLA NLA controller See Note(s) B See Note(s) D, G 2GT with one controller, shock forks NLA NLA and short base together as of 5/20/02 See Note(s) A See Note(s) G, D 2GT/2GR/2GTR with NLA NLA two controllers See Note(s) B See Note(s) E, G 2GT/2GR/2GTR with two controllers, shock NLA NLA forks and short base together as of 5/20/02 See Note(s) B See Note(s) E, G NOTE: A - Includes items 9 and 4-9 B - Includes items 0, 4-8 and 20 C - Includes items, 4, 6, 7 and 2 D - Includes items 2, 4-9, 22 and 23 E - Includes items 3 and 4-8 F - Used when TRRO or TRBKTS option is ordered G - Used only when TRBKTS option is ordered. TRRO option is not offered NOTE: Two Controllers = Joystick Controller and Powered Seating System Actuator Controller are being used 22

124 MKIV Controllers, Programmer and Hardware MKIV TrueTrack NOTE: GB motors were not available with the Arrow (30-40HD) user weight selection until /26/04 when the TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (30-35 TQHD) user weight selection until /26/04 when the user weight limit was raised to 400 Lbs. See Motor/Gearbox Assembly Reference Charts for additional standard/optional on-chair applications for all models 23

125 MKIV Controllers, Programmer and Hardware MKIV TrueTrack NOTE: GB motors were not available with the Arrow (30-40HD) user weight selection until /26/04 when the TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (30-35 TQHD) user weight selection until /26/04 when the user weight limit was raised to 400 Lbs. See Motor/Gearbox Assembly Reference Charts for additional standard/optional on-chair applications for all models 24

126 MKIV Controllers, Programmer and Hardware MKIV TrueTrack NOTE: GB motors were not available with the Arrow (30-40HD) user weight selection until /26/04 when the TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (30-35 TQHD) user weight selection until /26/04 when the user weight limit was raised to 400 Lbs. See Motor/Gearbox Assembly Reference Charts for additional standard/optional on-chair applications for all models Item Number Note Part Number Description A,B,C B,D E,E,N F 7 G 8 H 9 I P J 23 K M,O,O L,M M,Q Quantity Per Package Assembly 086-NLA NLA - Controller with Instructions, MKIV GB (TrueTrack) Non-Heavy Duty NLA NLA - Controller with Instructions, MKIV GB (TrueTrack) Non-Heavy Duty 6603-NLA NLA - Kit, Controller w/ Instructions, MKIV GB (TrueTrack) Heavy Duty See Chart Controller Mounting Bracket with Hardware NLA NLA - Bracket w/ Fastener Strips, Controller Mounting NLA NLA - Kit, Controller Mounting Bracket with Fastener Strips, Black NLA NLA - Bracket, Controller Mounting, Black Kit, Controller Mounting Bracket w/ Fastener Strips, Black 4063X002 Screw, Phillips Round Head (#0-32 x /2") Screw, Hex Head w/ Patch (5/6-8 x ") NLA NLA - Washer, Lock Tooth (3/6 x 3/8 x /32") NLA NLA - Wire, Grounding Jumper Strap E.S.D NLA NLA - Washer, Internal Tooth (M8) NLA NLA - Fastener, Hook with Adhesive Back (" W x 2 " L) NLA NLA - Package, Fastener, Dual Lock 250 (/2" W x 0 7/8" L) Locknut (#0-32) Washer, Flat (5/6 x 5/8 x /6") NLA NLA - Screw, Socket Head Cap (5/6-8 x /2") NLA NLA - Clamp, Cable Screw, Phillips Pan Head (#0-32 x 5/8") NLA NLA - Programmer, Remote Switch, Red Flex Ribbon (Tape) Reset Kit, Switch, Black Egg Reset w/ Hook/Loop Adhesive Back Fastener & Attaching Screws (EGSBLK) 092-NLA NLA - Cable, Motor Extension, GB (8") 5927 Package, Thumb Screw (-/2" L) Kit, GB HD Controller Gasket Connector 0590-NLA NLA - Kit, ESD Ground Strap - GB 059-NLA NLA - Instruction Sheet, ESD Kit (GB) 25

127 MKIV Controllers, Programmer and Hardware MKIV TrueTrack NOTE: GB motors were not available with the Arrow (30-40HD) user weight selection until /26/04 when the TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (30-35 TQHD) user weight selection until /26/04 when the user weight limit was raised to 400 Lbs. See Motor/Gearbox Assembly Reference Charts for additional standard/optional on-chair applications for all models Item Number Note Part Number Description NOTE: Quantity Per Package Assembly M 8363-NLA NLA - Instruction Sheet, Replacing and Calibrating MKIV (GB) Controller M NLA NLA - Service Manual, MKIV Electronics M Cable, Virtual Service, Charger/Modem M NLA NLA - Virtual Service Modem Kit M 0963-NLA NLA - Virtual Service Software Kit M 0305-NLA NLA - MKIV One 2 One Software Kit M NLA NLA - Disk, 3.5 H.D. Floppy with V.S. Software M NLA NLA - Adaptor, Null Modem M NLA NLA - Service Manual - V.S. Software Kit M 0467-NLA NLA - Printer and Interface M NLA NLA - Paper, Printer M NLA NLA - Harness, Printer Wiring A - It is recommended that an E.S.D. ground strap kit part number 0590 be ordered when a new controller is needed for chairs built before 4/2/0 B - Controller w/o instructions before 4//02 is and after 3/3/02 is as noted on the controller decal C - Before 4//02. No longer available. Use part number as a replacement D - After 3/3/02 E - Controller w/o instructions is part number 6589 as noted on the controller decal. MKIV GB heavy duty TTHD controllers older than serial number 5704A028 are not compatible with - E - Group 24 battery box lids made after /25/04 (3/4/04 for VA Government orders) that contain a 25 Amp. fuse F - Comes packaged with item 2 Controller Mounting Bracket with Hardware. See chart for Bracket application G - Comes packaged with item 3 Controller Mounting Bracket with Hardware. See chart for Bracket application H - Comes packaged with item 4 Controller Mounting Bracket with Hardware. See chart for Bracket application I - Comes packaged with item 5 Controller Mounting Bracket with Hardware. See chart for Bracket application J - Before 5/24/04 K - After 5/23/04. The Egg Reset Switch replaced the Red Flex Ribbon (Tape) Reset Switch L - Includes items 0-3 and Instruction Sheet M - Not Shown N - Controller will include a Controller Gasket Connector Kit created 0/26/07 that attaches to the controller motor cables. O - Kit was created 0/26/07 and attaches to the controller motor cables. Includes 2 ea. GB HD Controller Gasket Connectors, 2 ea. Silicon Lubricant Packets, ea. Instruction Sheet. Individual components are non-saleable. O - The kit can retrofit to existing GB HD controllers in the field P - Part # is no longer available as a service part individually. Must order a complete Controller Mounting Bracket w/ Hardware as a replacement. Q - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. Item #'s 2-5 Controller Mounting Bracket with Hardware 26

128 MKIV Controllers, Programmer and Hardware MKIV TrueTrack NOTE: GB motors were not available with the Arrow (30-40HD) user weight selection until /26/04 when the TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (30-35 TQHD) user weight selection until /26/04 when the user weight limit was raised to 400 Lbs. See Motor/Gearbox Assembly Reference Charts for additional standard/optional on-chair applications for all models Seating System Item #'s 2-5 Controller Mounting Bracket with Hardware Item #2 Controller Mounting Item #3 Controller Mounting Item #4 Controller Mounting Bracket with HardwareBracket with HardwareBracket with Hardware Item #3 and #5 Controller Mounting Bracket with Hardware For TRRO/TRBKTS Option Van Seat with one NLA controller See Note(s) A ASBA/ADJASBA w/ NLA NLA one controller See Note(s) A See Note(s) E, D ASBA/ADJASBA with NLA NLA two controllers See Note(s) B See Note(s) B, E ASBA/ADJASBA with two controllers, shock NLA NLA forks and short base together as of 5/20/02 See Note(s) B See Note(s) B, F ESS6-STM (Elevating NLA Seat) with one controller See Note(s) A ESS6-STM (Elevating NLA Seat) with two controllers See Note(s) B ESS-PTO with two NLA controllers See Note(s) B ESS-PTO with two controllers, shock NLA forks and short base together as of 5/20/02 See Note(s) B Power Tilt Only (PTO) 073-NLA with one controller See Note(s) C 2GT with one NLA NLA controller See Note(s) B See Note(s) F, D 2GT with one controller, shock forks NLA NLA and short base together as of 5/20/02 See Note(s) A See Note(s) F, D 2GT/2GR/2GTR with NLA NLA two controllers See Note(s) B See Note(s) B, F 2GT/2GR/2GTR with two controllers, shock NLA NLA forks and short base together as of 5/20/02 See Note(s) B See Note(s) B, F 27

129 MKIV Controllers, Programmer and Hardware MKIV TrueTrack NOTE: GB motors were not available with the Arrow (30-40HD) user weight selection until /26/04 when the TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (30-35 TQHD) user weight selection until /26/04 when the user weight limit was raised to 400 Lbs. See Motor/Gearbox Assembly Reference Charts for additional NOTE: standard/optional on-chair applications for all models A - Includes items 6, 0-5, 20 and 2 B - Includes items 7, 0-4, 6, 20 and 2 C - Includes items 8, 0, 2, 3, 7, 20 and 2 D - Includes items 9, 0-5, 8-2 E - Used when TRRO or TRBKTS option is ordered F - Used when TRBKTS option is ordered. TRRO option is not offered NOTE: Two Controllers = Joystick Controller and Powered Seating System Actuator Controller are being used 28

130 Electronics MKIV Elevating Seat Toggle Switch 29

131 Item Number Note Part Number Description Electronics MKIV Elevating Seat Toggle Switch Quantity Per Package Assembly NLA NLA - Switch, MKIV Elevating Seat Toggle 2 A Kit, Joystick Tube Toggle Switch Mounting Hardware 3 Half Clamp, Threaded Holes 4 Half Clamp, Non-Threaded Holes 5 Screw, Hex Head w/ Patch (/4-20 x /2") 2 6 NLA - Bracket, Toggle Switch Mounting, Black 7 NLA - Screw, Hex Head (/4-20 x -/8") 2 2 B NLA NLA - Kit, Quad Link Toggle Switch Mounting Hardware 5 Screw, Hex Head w/ Patch (/4-20 x /2") 4 6 NLA - Bracket, Toggle Switch Mounting, Black 8 NLA - Bracket, Quad Link Toggle Switch Mounting, Black 9 Screw, Phillips Pan Head (#0-32 x -3/8") 2 0 Locknut (/4-20) 2 Locknut (#0-32) 2 2 C NLA NLA - Kit, Quad Link Toggle Switch Mounting Hardware 2 Locknut (#0-32) 2 3 Screw, Hex Head w/ Patch (/4-20 x /2") 2 4 Bracket, Toggle Switch Mounting, Black 5 Screw, Phillips Pan Head w/patch (#0-32 x 7/8") NLA NLA - Sensor, Proximity Switch NOTE: A - Includes items 3-7 B - Before 0/3/05 and Includes items 5, 6 and 8- C - After 0/30/05 and includes items

132 MKIV TAC and 4-Way Switch NOTE: MKIV TAC and 4-way switch are used when Power Articulating Legrest Kits are ordered. 3

133 MKIV TAC and 4-Way Switch NOTE: MKIV TAC and 4-way switch are used when Power Articulating Legrest Kits are ordered. Item Number Note Part Number Description Quantity Per Package Assembly A,F NLA NLA - Controller w/ Hardware, MKIV TAC B,E,F NLA NLA - Controller w/ Hardware, MKIV TAC 2 G NLA NLA - Controller, MKIV TAC NLA NLA - Screw, Hex Head w/ Patch (5/6-8 x 7/8") Locknut (5/6-8) 2 5 I 0806-NLA NLA - Switch, 4-Way (FWT) Kit, Switch, 4-Way (FWT) 6 C Kit, 4-Way Switch Joystick Tube Mounting Hardware 7 Half Clamp, Threaded Holes 8 Half Clamp, Non-Threaded Holes 9 NLA - Bracket, Joystick Mounting, Black 0 NLA - Screw, Hex Head (/4-20 x -/8") 2 Washer (#0 Flat) 2 2 Screw, Phillips Pan Head (#0-32 x /2") 2 6 D,J NLA NLA - Kit, 4-Way Switch Quad Link Mounting Hardware 9 NLA - Bracket, Quad Link Mounting, Black Washer (#0 Flat) 2 2 Screw, Phillips Pan Head (#0-32 x /2") 2 3 Locknut (#0-32) 2 4 Screw, Phillips Pan Head (#0-32 x -3/8") 2 6 H,J 3948 Kit, 4-Way Switch Quad Link Mounting Hardware 5 Screw, Phillips Pan Head w/patch (#0-32 x 7/8") 2 6 Screw, Phillips Pan Head (#0-32 x /2") 2 7 NLA - Washer, Nylon (#0) 2 8 Locknut (#0-32) Bracket, 4-Way Switch Quad Link, Black - Right Bracket, 4-Way Switch Quad Link, Black - Left NOTE: A - Before 5//02 B - After 4/30/02 C - Includes items 7-2 D - Before /3/05 and Includes items 9 and -4 E - MKIV T.A.C. part number is not compatible with power legs with an inline actuator made before 5//02 F - Includes items 2-4 G - Part number is being sold with the hardware. See item # part number H - After /30/05 and includes items 5-9 I - Part # 0806 is No Longer Available. Order item # part number as a replacement. New design is rectangular in shape. It is recommended to order new Hardware as well. J - 4-Way Toggle Switch is not compatible with this hardware. 32

134 MKIV TAC and 4-Way Switch For TRBKTS Option NOTE: MKIV TAC and 4-way switch are used when Power Articulating Legrest Kits are ordered. 33

135 MKIV TAC and 4-Way Switch For TRBKTS Option NOTE: MKIV TAC and 4-way switch are used when Power Articulating Legrest Kits are ordered. Item Number Note Part Number Description Quantity Per Package Assembly A NLA NLA - Controller w/ Hardware, MKIV TAC For TRBKTS Option Screw, Hex Head w/ Patch (5/6-8 x 5/8") 2 3 D 0806-NLA NLA - Switch, 4-Way (FWT) Kit, Switch, 4-Way (FWT) 4 B Kit, 4-Way Switch Joystick Tube Mounting Hardware 5 Half Clamp, Threaded Holes 6 Half Clamp, Non-Threaded Holes 7 NLA - Bracket, Joystick Mounting, Black 8 NLA - Screw, Hex Head (/4-20 x -/8") 2 9 Washer (#0 Flat) 2 0 Screw, Phillips Pan Head (#0-32 x /2") 2 4 C,E 3948 Kit, 4-Way Switch Quad Link Mounting Hardware Screw, Phillips Pan Head w/patch (#0-32 x 7/8") 2 2 Screw, Phillips Pan Head (#0-32 x /2") 2 3 NLA - Washer, Nylon (#0) 2 4 Locknut (#0-32) Bracket, 4-Way Switch Quad Link, Black - Right Bracket, 4-Way Switch Quad Link, Black - Left NOTE: A - Includes the controller, item 2 and used for TRBKTS Option. B - Includes items 5-0 C - Includes items -4 D - Part # 0806 is No Longer Available. Order item #3 part number as a replacement. New design is rectangular in shape. It is recommended to order new Hardware as well. E - Part # Way Toggle Switch is not compatible with this hardware. 34

136 Controller Shroud Covers 35

137 Controller Shroud Covers Seating System Type A.S.B.A. Seat ESS6-STM Elevating Seat ESS-PTO Elevating Seat w/ Power Tilt Only NOTE: See Note(s) C VAN Seat Item Item 2 Item 3 Item 4 Item NLA Before 7/6/0 w/ Two Controllers 0484-NLA See Note(s) A After 7/5/0 To Present w/ Two Controllers After 7/5/0 To Present w/ Two Controllers After 7/5/0 To Present w/ Two Controllers 2684-NLA After 5/9/02 w/ Two Controllers, Short Base and Shock Forks Present After 5/9/02 w/ Two Controllers, Short Base and Shock Forks Present One Controller, 4-Pole Motors or (GB Motors w/ Wheel locks), (with or without Shock Forks) and Short Base One Controller, 4-Pole Motors or (GB Motors w/ Wheel locks), (with or without Shock Forks) and Short Base One Controller, 4-Pole Motors or (GB Motors w/ Wheel locks), (with or without Shock Forks) and Short Base A - Two TrueTrack decals must be ordered when G/B motors are present for chairs made after 6/2/02. B - Shroud cover includes the TrueTrack decals and loop fasteners. C - When a PTO is ordered without the elevate seat option, the controller cover is omitted See Note(s) B One Controller, (GB Motors w/o Wheel locks), (with or without Shock Forks) and Short Base One Controller, (GB Motors w/o Wheel locks), (with or without Shock Forks) and Short Base One Controller, (GB Motors w/o Wheel locks), (with or without Shock Forks) and Short Base NOTE: All controller shroud covers include mounting hardware. NOTE: When a 2G Powered Seating System is present, see the 2G Powered Seating system parts book Form # for the correct controller shroud cover. NOTE: Two controllers are identified as one chair equipped with a joystick controller and a seating system actuator(s) controller. 36

138 Item Number Note Part Number Description Controller Shroud Covers Quantity Per Package Assembly 6 A NLA NLA - Kit, Controller Shroud Mounting Hardware 2 (Pair) NLA NLA - Washer, Nylon Retainer (/4 x /2 x /32") NLA NLA - Washer, Nylon Cupped (9/32 x 9/32 x 3/32") NLA NLA - Spring, Torsion Ejector 2 0 B 0508-NLA NLA - Stud, Phillips Recess (/4" Dia. x " Long, /4 2 Turn) 0509-NLA NLA - Retainer, Stud (/4" Turn) NLA NLA - Fastener, Loop Adhesive Back (" W x 3" L) NLA NLA - Decal, TrueTrack NLA NLA - Package, Fastener, Dual Lock 250 (/2" W x 0 4 7/8" L) Screw, Phillips Pan Head (#0-32 x 5/8") 2 C See Chart Controller Shroud Covers NOTE: A - Includes items 7- B - Due to a hardware change, when item 0 is requested, refer to Item 6 for chairs manufactured before 2/2/02 C - Not Shown 37

139 MKIV Sip-N-Puff/Digital Interface and COM2 and COM34 38

140 MKIV Sip-N-Puff/Digital Interface and COM2 and COM34 Item Number Note Part Number Description Quantity Per Package Assembly NLA NLA - Sip-N-Puff w/ Digital Interface 9 D See Note See Footnote NLA NLA - Module, Communication, COM34/AUX34 0 A NLA NLA - Kit, COM2/AUX2 and COM34/AUX34 Mounting Hardware Half Clamp, Threaded Holes 2 Half Clamp, Non-Threaded Holes 3 NLA - Screw, Hex Head (/4-20 x -/8") 2 4 NLA - Fastener, Dual Lock Hook and Loop Adhesive (2" W x 2" L) 5 NLA - Plate, COM2/AUX2 and COM34/AUX34 Mounting B,C Kit, SNP/DI, MK5 SAC, 4WSB, S4WSB, GTAM, AUX2M6, AUX34M6 Mtg. Hdwr. Half Clamp, Threaded Holes 2 Half Clamp, Non-Threaded Holes 3 NLA - Screw, Hex Head (/4-20 x -/8") 2 6 Screw, Phillips Pan Head (#4-40 x 3/8") 2 7 Plate, Mounting NOTE: A - Mounting hardware includes items -5. Item 4 that is packaged with the kit will only be a 4" long "loop" fastener. B - Includes items -3 and 6-7 C - As of 5/22/07 the Mounting Plate holes and the orientation of the Hardware was revised to attach the electronics closer to the chair. The Mounting Hardware Kit is backward compatible. D - Part is no longer serviceable in the field. 39

141 MKIV Displays 40

142 Item Number Note Part Number Description MKIV Displays Quantity Per Package Assembly NLA NLA - Display without Switches Display with Switches 3 A NLA NLA - Tube, Flex with Screws Screw, Phillips Pan Head (#4-40 x 3/8") 4 5 B NLA NLA - Hardware, Joystick Tube Mounting NLA NLA - Half Clamp, Threaded Holes Half Clamp, Non-Threaded Holes Adjustment Lock Assemnbly, Black NLA NLA - Bracket, Joystick Mounting, Black X004-NLA NLA - Screw, Hex Head (/4-20 x -/8") 3 C Clamp, Fixed Height Joystick Tube 2 F Clamp, Height Adjustable Joystick Tube (ARM250) 3 D Switch, Red Flex Ribbon (Tape) Reset 4 E Kit, Switch, Black Egg Reset w/ Hook/Loop Adhesive Back Fastener & Attaching Screws (EGSBLK) NOTE: A - Includes the Flex Tube and item 4 B - Before 0/4/00 and includes items 6-0 C - After 0/3/00 and can be used as a direct replacement for the Joystick Tube Mounting Hardware part number in the field. Individual components are non-saleable D - Before 5/24/04 E - After 5/23/04 the Egg Reset Switch replaced the Red Flex Ribbon (Tape) Reset Switch F - Introduced 0/3/05 as option (ARM250) and can be used to replace a Fixed Height Joystick Tube Clamp in the field 4

143 MKIV R.I.M. Head Control Mounting Hardware (500M4) Item Number Note Part Number Description Quantity Per Package Assembly B Cover, Nylon C 0555-NLA NLA - Cover, Nylon NLA NLA - Clamp with Knob, Two-Piece Screw, Socket Button Head (#0-32 x 3/4") NLA NLA - Package, Screw, Hex Head (/4-20 x 3/4") B NLA NLA - Bracket, Attaching, Black (2-8" W) 5 C NLA NLA - Bracket, Attaching, Black (9-24" W) Screws with Washers (#0-6 x 7/8") Screw w/ Washer (#0 x 7/8") NLA NLA - Bracket, Wing, Black Washer (/4 x /2 x /6") Locknut (/4-20) Washer, Nylon (3/6 x 7/6 x /8") NLA NLA - Locknut, High Profile (#0-32) B,A Hardware, Rim Control Mounting (RIMHW) (2-8" W) 2 C,A Hardware, Rim Control Mounting (RIMHW) (9-24" W) NOTE: A - Includes items - B - For 2-8" wide chairs C - For 9-24" wide chairs 42

144 MKIV R.I.M. Head Control Assembly (500M4) 43

145 MKIV R.I.M. Head Control Assembly (500M4) Item Number Note Part Number Description A B C 38 D E Quantity Per Package Assembly Tie Rod End 48095X000 Locknut (#0-32) NLA NLA - Screw, Set w/ Patch (#8-32 x /4") O-Ring (/2" I.D.) Screw, Phillips Pan Head (#8-32 x 3/8") NLA NLA - Washer, Nylon Block, Pivot NLA NLA - Ring, Snap Bearing, Linear NLA NLA - Shield, Push Rod Screw, Phillips Pan Head (#4-40 x /2") NLA NLA - Bracket, Headrest Mounting, Black 4027X002-NLA NLA - Screw, Phillips Oval Head (#0-32 x 3/4") NLA NLA - Spring, Compression (9/32 x -/4 x /32") NLA NLA - Rod, Push NLA NLA - Screw, Phillips Pan Head (#6-32 x /4") Washer, Nylon (/4 x /2 x /6") NLA NLA - Collar, Shoulder 50000X364-NLA NLA - Boot, Joystick NLA NLA - Rod, Pivot 008X04 Screw, Phillips Round Head (#0-32 x ") NLA NLA - Tie Wrap (4-/4" L) NLA NLA - Cover, Splash Washer, Plain (/2 x x /8") NLA NLA - Ribbon Reset Switch and Bracket Assembly 05620E-NLA NLA - Reconditioned - Joystick, Remote Head NLA NLA - Clamp, Horizontal Pivot NLA NLA - Clamp, Threaded, Horizontal Pivot NLA NLA - Screw, Socket Head (M6 x x 25mm) Tube, Slide, Square, Short NLA NLA - Clamp, Vertical Pivot NLA NLA - Clamp, Threaded, Vertical Pivot NLA NLA - Tube, Slide, Square, Long Hardware, Adjustment Screw, Socket Button Head (#0-32 x ") NLA NLA - Washer, Lock Tooth (3/6 x 3/8 x /32") Kit, Headrest with Hardware, Otto Bock, Small Kit, Headrest with Hardware, Large NLA NLA - Screw, Socket Head (#0-32 x /2") 4 44

146 NOTE: MKIV R.I.M. Head Control Assembly (500M4) A - Includes items -25. B - Includes items and the Plug Buttons that attach to item 30 and 33 Slide Tubes. The Plug Buttons are not saleable. C - Includes the Headrest Adapter and items 35 and 36. D - Includes the Headrest Adapter and items 35 and 36. The LaBac Headrest is no longer used as of 2/6/0 that was attached with Screw part # (4 ea.). The screw is still available to order for existing LaBac Headrest in the field. E - Used for existing LaBac Headrest in the field only. 45

147 MKIV Joystick Options 46

148 Item Number Note Part Number Description N A 0 2 B C D E O F G H 42 I 43 J MKIV Joystick Options Quantity Per Package Assembly See Note See Footnote NLA NLA - Clamp, Universal Swivel 2595X000 Handle, Lock, Chrome 508X000 Locknut (/4-20) NLA NLA - Joystick Tube with Plug Button Assembly Plug Button, Black (7/8") Joystick, Attendant Control (552M) NLA NLA - Joystick, Heavy Duty NLA NLA - Kit, Straight Joystick Tube with Hardware 0640-NLA NLA - Screw, Phillips Round Head (#0-32 x 3/8") Plug Button, Black (7/8") Hardware, Rear Cane Mount (673/RCM) Plug Button, Black (7/8") Adjustment Lock Assemnbly, Black NLA NLA - Bracket, Upright, Black -Right NLA NLA - Tube, Joystick Screw w/ Washer (#0 x 7/8") Tube, Arm Mount with Plug Button, Black Plug Button, Black (7/8") NLA NLA - Joystick, MKIV Dual/Compact 0802 Hardware, Dual/Compact Joystick Clamp Mounting Clamp Screw, Socket Button Head (#0-32 x 5/6") NLA NLA - Clamp, Mounting NLA NLA - Screw, Socket Head (#0-24 x /2") NLA NLA - Spacer, Split (3/8" I.D.) NLA NLA - Chin Cup Assembly Cup, Chin 0762-NLA NLA - Screw, Adaptor 90032X000 Screw, Set Socket Cup Point (#8-32 x /4") NLA NLA - Touchpad, Joystick Assembly NLA NLA - Kit, Straight Joystick Tube with Hardware Plug Button, Black (7/8") Screw, Phillips Pan Head (#4-40 x 3/8") NLA NLA - Hardware, Joystick Tube Mounting NLA NLA - Half Clamp, Threaded Holes Half Clamp, Non-Threaded Holes Adjustment Lock Assemnbly, Black NLA NLA - Bracket, Joystick Mounting, Black 6690X004-NLA NLA - Screw, Hex Head (/4-20 x -/8") Clamp, Fixed Height Joystick Tube Clamp, Height Adjustable Joystick Tube (ARM250) Switch, Red Flex Ribbon (Tape) Reset 47

149 Item Number Note Part Number Description MKIV Joystick Options Quantity Per Package Assembly 44 K Kit, Switch, Black Egg Reset w/ Hook/Loop Adhesive Back Fastener & Attaching Screws (EGSBLK) L Display with Switches M NLA NLA - Display without Switches NOTE: A - Includes the joystick tube and items 0 and B - Includes items 3-7 C - For On-Chair model numbers 678 and 679. Includes the joystick tube and item 9 D - Includes items E - Includes items F - Includes the joystick tube, items 33 and 34 G - Before 0/4/00 and includes items H - After 0/3/00. Individual components are non-saleable. Can be used as a direct replacement in the field for the Joystick Tube Mounting Hardware part number I - Introduced 0/3/05 as option (ARM250) and can be used to replace a Fixed Height Joystick Tube Clamp in the field. Individual components are non-saleable. J - Before 5/24/04 K - After 5/23/04. The Egg Reset Switch replaced the Red Flex Ribbon (Tape) Reset Switch L - Not Shown and used with the Heavy Duty and Touch Pad Joystick M - Not Shown and used with the Remote Joystick N - No longer available as a service part in the field. O - Part #0762 is no longer available as a service part individually. Order item #27 as a replacement. 48

150 Tash and Therafin Accessories 49

151 Item Number Note Part Number Description Tash and Therafin Accessories Quantity Per Package Assembly P5820-NLA NLA - Switch, Red Soft P582 NLA - Switch, Green Soft 2 C P508-NLA NLA - Wafer Board (508) 3 C P5026-NLA NLA - Star Control 4 C P5020 Mini Joystick with Push (5020) 5 P4337-NLA NLA - Multi-Ability Cable 6 P4353-NLA NLA - CA5 Multi-Connector Box 7 P5970-NLA NLA - Clamp, "U" B Bib Assembly (PKG32669) B P2456-NLA NLA - Adaptor Clamp - Tash B P2457-NLA NLA - Adaptor Clamp - Invacare B P2460-NLA NLA - Midline Swingway System A,B Kit, Sip-N-Puff, 6" Fixed (PKG32666) Includes: (3) Air Tube Straws, (2) Saliva Traps, Tubing, Pivot Shaft/Flexible Metal Gooseneck Assembly, and Extruded Figure "8" Clamp to fit 7/8" Wheelchair Frame Tubing. Extruded Back Cane Adapter Clamp. B Display with Switches NOTE: A - See items included. B - Not Shown C - Must be used with display with switches part #

152 Invacare Corporation One Invacare Way Elyria, Oh USA Technical Support Customer Service Literature Orders Invacare Corporation. All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by and. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted. (Revised 8//8)