Commercial & Industrial Fluorescent Wall and Undercabinet Mount

Transcription

1 Commercial & Industrial Fluorescent Wall and Undercabinet Mount Family FileName Description RevisionDate Undercabinet 2UC 2UC Wrap-front lens, 1-13/16'' profile, T8 or T12 lamps 01/01/1996 N2S N2S Finesse solid-front, 1-5/8'' profile, T8 lamps 04/01/1996 UC UC Wrap-front lens, 1-3/16" profile, T5 lamps 08/01/1999 Wall Brackets W W Contemporary 06/01/2000 WB WB Commercial 06/01/2000 WC WC Commercial 03/10/2008 WM WM Medical 06/01/2000 WP WP Surface Commercial 03/10/2008 WS WS Steel 06/01/2000

2 Catalog Number FEATURES & SPECIFICATIONS 1-3/4" deep design uses T8 or T12 lamps. Ideal for work stations and under cabinets, unit or row mounting. Low brightness, linear prism acrylic lens standard. Convenience outlet and on/off rocker switch available. Diffuser snaps easily into fixture body flanges. BALLAST Thermally-protected, resetting, Class P, HPF, non-pcb, UL listed ballast is standard on all T8 and T12 30W and 40W fixtures. Sound rating A. Standard combinations are CBM approved. WIRING & ELECTRICAL Fixture bears UL label and is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. MATERIALS Metal parts manufactured from code gauge steel. Diffuser is 100% acrylic. No asbestos is used in this product. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. High gloss, baked white enamel finish. LISTING UL listed. Labeled I.B.E.W. A.F. of L. Fixture guaranteed for one year against mechanical defects in manufacture. Specifications subject to change without notice. Notes Type Undercabinet Light 2UC T8 or T12 Lamps 4 Lengths Convenience outlet and rocker switch optional ORDERING INFORMATION Example: 2UC LP 2UC 1 Series Number of lamps Lamp type/wattage Lens Voltage Options 2UC 1 Not included 15 Nominal 15W T12 (18") 1,2 17 Nominal 17W T8 (24") 20 Nominal 20W T12 (24") 1,2 25 Nominal 25W T8 (36") 30 Nominal 30W T12 (36") 2 32 Nominal 32W T8 (48") 40 Nominal 40W T12 (48") NOTES: 1 Low power factor ballast (LPF) standard. High power factor and electronic ballast (HPF) optional. HPF, LPF or GEB must be specified in options box V configurations must be ordered with electronic ballast. (blank) Acrylic, milk white AR High impact resistant acrylic Others available, Consult factory. LP Cool white lamps (installed) SWR Rocker switch (120V only) CO Convenience outlet (120 only) CSA Labeled for shipment to Canada GLR Internal fast blow fuse LPF Low power factor ballast (15W and 20W only) HPF High power factor ballast (15W and 20W only) SSB Solid state ballast (32W and 40W only) ES Energy-saving ballast (40W only) GEB Electronic ballast, < 20% THD GEB10 Electronic ballast, < 10% THD Fluorescent Sheet #: 2UC UNC-120

3 2UC Undercabinet Light MOUNTING DATA DIMENSIONS Inches (centimeters). Subject to change without notice. Sheet #: 2UC 1996 Acuity Brands Lighting, Inc., Rev. 8/12/08 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA Phone:

4 Catalog Number FEATURES & SPECIFICATIONS Solid-front housing design eliminates direct glare. Trim, low-profile design is aesthetically appealing. Clean surface. Ideal for office, hospital, laboratory and kitchen applications. Suitable for confined undercabinet spaces. Hinged, removable, service tray design allows hands-free wiring and quick installation. Snap-in, optically-designed, proprietary lens provides uniform side-to-side and front-to-back light distribution to eliminate sharp cut-offs and shadowing. Positive-retention, shatter-resistant DR acrylic diffuser. Locking clips secure lens to prevent shifting and possible lamp breakage. Utilizes T8 lamp technology for energy efficiency and maximum visual clarity. Convenience outlet and on/off rocker switch available. All metal parts finished with electrostatically-deposited, thermally-set polyester powder paint after fabrication. Six fixture lengths available. Limited Lifetime Warranty. BALLAST Thermally-protected, Class P, HPF, non-pcb, UL-listed, CSA certified ballast is standard. Ballasts are sound rated A. Standard combinations are CBM approved and conform to UL 935. WIRING & ELECTRICAL Fixture conforms to UL 1570 and is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. MATERIALS Housing is precision die-formed from 20-gauge cold-rolled steel. Diffuser is shatter-resistant DR acrylic. No asbestos is used in this product. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with polyester powder paint. LISTING UL listed and labeled. Listed and labeled to comply with Canadian and Mexican Standards (see options). Specifications subject to change without notice. Notes Type Undercabinet Light N2S Solid Front T8 Lamps ORDERING INFORMATION Example: N2S GEB N2S Series N2S Undercabinet light, solid front, T8 Lamp number and type (length) 13T8PH 13W T8, preheat (12") 1,2 15T8PH 15W T8, preheat (18") 1,2 15T8 15W T8, trigger start, HPF (18") 17 17W T8 (24") 25 25W T8 (36") 32 32W T8 (48") 60T8 40W T8 (60") NOTES: 1 MVOLT available with GEB10IS only. 2 Available with 120V ballasting only. 3 15T8 277V configurations must be ordered with electronic ballast. 4 Not available with CO/COL convenience outlet options. 5 Cordset must always be specified for installation on same end of fixture as switch location. 6 Not available with CSW/CSWL/CSWC cordset options. 7 Not available on 12", 18" or 24" wide units. Voltage MVOLT 1 Others available. Options GEB Electronic ballast, < 20% THD GEB10IS Electronic ballast, < 10% THD, Instant Start GEB10RS Electronic ballast, < 10% THD, Rapid Start L/B Less ballast; required with TW2 option GLR Internal fast-blow fuse GMF Internal slow-blow fuse CSW 6-foot, 3-wire, grounded cordset, right end 2,4,5 CSWL 6-foot, 3-wire, grounded cordset, left end 2,4,5 CSWC 6-foot, 3-wire, grounded cordset, back center 2,4,5 TW1 Tandem-wired, section 1; supplied with one 2-lamp ballast TW2 Tandem-wired, section 2; requires L/B option CSA Listed and labeled to comply with Canadian Standards NOM Listed and labeled to comply with Mexican Standards CO Convenience outlet, bottom right 2,6 COL Convenience outlet, bottom left 2,6 SWR Rocker switch, bottom right 2 SWRL Rocker switch, bottom left 2 SWRC Rocker switch, bottom center 2,7 Fluorescent Sheet #: N2S UNC-100

5 N2S Undercabinet Light, Solid Front MOUNTING DATA For unit installation, surface mounting only. 1 (2.54) 2 1 /16 (5.24) 5 /8 dia. K.O. (1.59) DIMENSIONS Inches (centimeters). Subject to change without notice. Length (L) A B C # KEYHOLES D 13 /16 (2.06) 1 5 /8 (4.14) 12 1 /8" (30.80) 7 1 /4" (18.44) 18 1 /8" (46.04) 13 3 /4" (34.95) 18 1 /8" (46.04) TS* 13 3 /4" (34.95) 24 1 /8" (61.28) 19 3 /4" (50.19) /16" (6.20) 2 3 /16" (5.56) 2 3 /16" (5.56) 2 3 /16" (5.56) /4" (10.85) 6 1 /16" (15.42) 14 1 /16" (35.74) 8 5 /8" (21.92) 36 1 /8" (91.76) 31 3 /4" (80.67) /16" (5.56) /16" (45.90) 48 1 /8" (122.24) 20 1 /16" (50.93) 23 3 /4" (60.22) 2 3 /16" (5.56) /16" (61.14) 7 /8 dia. K.O. (2.22) 5 1 /2 (13.97) 60" (152.40) 26" (65.95) *15T8TS Trigger Start 29 5 /8" (75.25) 2 3 /16" (5.56) 3 30" (76.17) L 3 /8 dia. (1.02) D 5 /8 dia. K.O. (1.59) 1 /2 (1.24) 9 /16 (1.47) 13 /16 (2.06) 3 /8 (1.02) 13 /16 (2.02) 3 /16 dia. (.48) 1 15 /16 (4.88) Keyhole Slot C 7 /8 dia. K.O. (2) (2.22) A Keyhole Slot B PHOTOMETRICS Photometry derived in accordance with IESNA LM41 procedure. Vertical and horizontal illuminance is calculated with fixture mounted 15" from work surface. Full photometric data available upon request. UCSF 1 17 Report LTL 5851 Initial Point Illuminance on wall and horizontal work surface. (fc) X and Y coordinates are on 6" centers. X A B C D E F G H I Y Vert Horiz Horizontal Avg. = 31.7 fc Max. = 98.3 fc Min. = 4.3 fc Max. to min. ratio = 22.9 Vertical Avg. = 19.6 fc Max. = 61.3 fc Min. =.31 fc Max. to min. ratio = A B C D E F G H I Sheet #: N2S 1995 Acuity Brands Lighting, Inc., Rev. 8/12/08 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA Phone:

6 FEATURES Trim, low-profile design, only 1-3/16" deep. Flattened knockouts for cleaner appearance. Snap-fit channel cover attachment. No tools required for wireway access. Hinged, removable channel cover allows hands-free wiring and quick installation. Factory-installed starters on all preheat models. Romex/BXR conduit connector provided with each fixture. Optional instant-on electronic start magnetic ballast for flickerfree lamp start. Low-brightness, linear prismatic diffuser provides improved visual comfort. 15% DR acrylic and snap-fit diffuser design for improved shatterresistant and positive attachment. Optional task diffuser with clear linear prismatic bottom and opaque front for maximum illumination without direct edge glare. Five fixture lengths available. Available with factory-installed lamp, switch, cordset and convenience outlet options. SPECIFICATIONS BALLAST Normal power factor reactor type ballast standard. Others available (See ordering information). WIRING & ELECTRICAL Fixture conforms to UL 1570 and is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. MATERIALS Metal parts precision roll-formed from 20 gauge cold rolled steel. FINISH Five-stage iron-phosphate pre-treatment ensures superior paint adhesion and rust resistance. Painted parts finished with polyester powder paint. LISTING UL listed and labeled. Listed and labeled to comply with Canadian and Mexican Standards. Specifications subject to change without notice. Type Catalog number Undercabinet Light UC 1" Wrap-Front Lens PHOTOMETRICS Photometry derived in accordance with IESNA LM41 procedure. Vertical and horizontal illuminance is calculated with fixture mounted 15" from work surface. Full photometric data available upon request. Initial Point Illumination on horizontal work surface. (fc) Coordinates are on 6" centers. UC 24 Report LTL A B C D E F G H UC 42 Report LTL A B C D E F G H UC

7 UC Undercabinet Light MOUNTING DATA For unit or row mount installation, surface mounting only. DIMENSIONS Inches (centimeters). Subject to change without notice. K.O. BOTH ENDS OF PART 7 /8 (2.22) 5 /8 (1.59) Length A B C # Keyholes 12-3/8 (31.43) 7-1/16 (17.94) 2-5/8 (6.67) 6-1/8 (15.56) /16 (3.02) 9 /16 (1.43) 21-3/8 (52.23) 16-1/16 (40.80) 2-5/8 (6.67) 10-11/16 (27.15) /2 (62.25) 19-1/4 (48.90) 2-5/8 (6.67) 12-1/4 (31.12) /2 (85.10) 28-1/4 (71.76) 2-5/8 (6.67) 17 (43.18) /2 (107.96) 37-1/4 (94.62) 2-5/8 (6.67) 21-1/4 (53.98) 2 5 /8 (1.59) 5 (12.7) 3 /8 dia. (1.02) 5 /8 dia. K.O. (1.59) L 7 /16 (11.11) 3 /8 (1.02) C 3 /16 dia. (.48) 1 (2.54) 3-15 /16 (8.41) 7 /8 dia. K.O. (2.22) Keyhole Slot B A ORDERING INFORMATION Example: UC 33K OP 120 UC Series Fixture length/ballast type Diffuser Voltage Options UC Undercabinet light 12 (1) 8W T5, Preheat 12K (1) 8W T5, Instant-On 21 (1) 13W T5, Preheat 21K (1) 13W T5, Instant-On 24 (2) 8W T5, Preheat 24K (2) 8W T5, Instant-On 33 (1) 8W and (1) 13W T5, Preheat 33K (1) 8W and 13W T5, Instant-On 42 (2) 13W T5, Preheat 42K (2) 13W T5, Instant-On (blank) Standard, milk-white, DR acrylic OP Opaque-front, clear bottom DR acrylic 120, 277 GLR Internal fast-blow fuse GMF Internal slow-blow fuse CSW 6-foot, 3-wire, grounded cordset, right end LPWW Warm white 3000K T5 lamp(s); factory supplied VALREF213 Electronic ballast PAF White powder paint finish after fabrication CO Grounded convenience outlet. Installed, bottom right, 120V only SWR Rocker switch, installed bottom right, 120V only CSA Listed and labeled to comply with Canadian Standards NOM Listed and labeled to comply with Mexican Standards UC 1997 Lithonia Lighting, Rev. 8/99 UC.P65 P.O. BOX A, CONYERS, GEORGIA 30012, TELEPHONE , FAX IN CANADA: TH AVE., LACHINE, QUEBEC H8T 2V3

8 FEATURES One-piece, extruded aluminum housing with brushed finish and chrome trim. Woodgrain vinyl laminated to injection-molded ends brushed aluminum end appliques optional. Up/down light distribution options. Lens housing secured to channel assembly by spring-loaded latches. Gasketed back plate and silicone-sealed housing eliminate light leaks. Convenience outlet available on 120V units. SPECIFICATIONS BALLAST Thermally-protected, Class P, HPF, non-pcb, UL listed, CSA certified ballast is standard. Sound rated A. WIRING & ELECTRICAL Fixture conforms to UL 1570 and is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. MATERIALS Parts are die-formed from code-gauge steel. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Standard finish is highgloss, baked white enamel. Architectural black 40% gloss finish is optional. All parts PAF. LISTING UL listed and labeled. Listed and labeled to comply with Canadian and Mexican Standards (see Options). Specifications subject to change without notice. ENERGY Luminaire Efficacy Rating (LER) and Annual Energy Cost: Twolamp LER.FW = 58. Annual Energy Cost = $4.14. Based on 32W T8 lamp (2850 lumens) and energy-saving electronic ballast. Ballast factor =.88, input watts = 54. Calculated in accordance with NEMA standard LE-5. Type Catalog number Surface Commercial W Contemporary Wall Bracket 1', 2', 3' or 4' Lengths 1 or 2 Lamps PHOTOMETRICS Full photometric reports available upon request. W

9 W Wall Bracket, Contemporary MOUNTING DATA DIMENSIONS Inches (millimeters). Subject to change without notice. E = 2(51) Dia. K.O. R = Keyhole Slot ORDERING INFORMATION W Example: W GEB CO Series W Wall Bracket Number of lamps 1, 2 Not included. Lamp type U16 16W T8 U (12") W T8 (24") CF18 18W TT5 RS (12") 20 20W T12 (24") 25 25W T8 (36") 30 30W T12 (36") 32 32W T8 (48") 40 40W T12 (48") NOTES: 1 One lamp only. 2 MVOLT available with GEB10IS only. 3 For optional locations, consult factory. 4 BF option must be specified if separation of up and down light is desired. 5 Requires 2/1 option (2-lamp only). 6 Required with S2 or S4 options. Diffuser type/ light distribution (blank) #12 pattern.125" thick lower lens, matte white; #12 pattern.187" thick upper lens A12U #12 pattern.125" lower and upper lens DO Downlight only Voltage 120, 277, 347, MVOLT 2 Others available. Options CO Grounded convenience outlet, 120V only (lower right) 3 AE Brushed aluminum end cap appliques S1 Pull-chain switch; installed bottom left; on/off operation of all lamps only (120V only) 3 S2 Pull-chain switch, on/off operation of forward (down) lamp, rear (up) lamp remote-switched (120V only) 3,4,5 S4 Pull-chain switch; four position front only, rear only, all on, all off; installed bottom left (120V only) 3,4,5 2/1 Two 1-lamp ballasts 4,6 BF Internal baffle for up and down light separation GEB Electronic ballasts, < 20% THD GEB10IS Electronic ballasts, < 10% THD, Instant Start GEB10RS Electronic ballasts, < 10% THD, Rapid Start ES Energy saving ballasts N Unswitched night light for 7W C7 lamp; top left NS Night light with push-switch for 7W C7 lamp; top left MB Matte black finish WH White finish CSA Listed and labeled to comply with Canadian Standards NOM Listed and labeled to comply with Mexican Standards W 1983 Lithonia Lighting, Rev. 6/00 w.p65 P.O. BOX A, CONYERS, GEORGIA 30012, TELEPHONE , FAX IN CANADA: TH AVE., LACHINE, QUEBEC H8T 2V3

10 FEATURES Specification wall bracket for work stations, corridors, dressing rooms, lavatories and other locations. Die-cast aluminum ends and door with matching aluminum trim door locks open for easy relamping. Woodgrain vinyl trim standard; all-white finish optional. Up/down light distribution options. Suitable for row mounting. Guaranteed for one year against mechanical defects in manufacture. SPECIFICATIONS BALLAST Thermally protected, Class P, HPF, non-pcb, UL listed, CSA certified ballast is standard. Sound rated A. WIRING & ELECTRICAL Fixture conforms to UL 1570 and is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. MATERIALS Parts are die-formed from code-gauge steel. Diecast aluminum ends and extruded aluminum door. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Standard woodgrain vinyl trim; optional high-gloss, baked white enamel finish. LISTING UL listed and labeled. Listed and labeled to comply with Canadian and Mexican Standards (see options). Specifications subject to change without notice. ENERGY Luminaire Efficacy Rating (LER) and Annual Energy Cost: Fourlamp LER.FW = 55. Annual Energy Cost = $4.36. Based on 32W T8 lamp, 2850 lumens and energy saving electronic ballast. Ballast factor =.88, input watts = 108. Calculated in accordance with NEMA standard LE-5. Type Catalog number Surface Commercial WB Wall Bracket Light 2', 3' or 4' Lengths 1, 2, 3 or 4 Lamps PHOTOMETRICS Full photometric reports available upon request. WB

11 WB Wall Bracket LIGHT DISTRIBUTION A12U A12L DIMENSIONS Inches (millimeters). Subject to change without notice. Uplight only (solid bottom) Downlight only (solid top) A12 BF and S4 B = 1/4 (6) Dia. K.O. E = 2 (51) Dia. K.O. Uplight and downlight Uplight and/or downlight (with optional baffle and pullswitch) ORDERING INFORMATION Example: WB 2 32 A GEB WB WB Series Wall Bracket Number of lamps 1 1, 2, 3, 3Y, 4 Not included. Lamp type 17 17W T8 (24") 20 20W TS T12 (24") 25 25W T8 (36") 30 30W T12 (36") 32 32W T8 (48") 40 40W T12 (48") NOTES: 1 Three lamps standard with two lamps bottom, one top. Order 3Y for one bottom, two top. Example: WB 3Y 32 A MVOLT available with GEB10IS only. 3 For optional locations, consult factory. 4 BF option must be specified if separation of up/down light is desired. 5 Requires 2/1 option (2-lamp only). 6 Must be specified with S2, S4 or BF options. Voltage 120, 277, 347, MVOLT 2 Diffuser type/ light distribution A12 A12L A12U 3EA #12 pattern acrylic; uplight and downlight,.125" thick #12 pattern acrylic; downlight only,.125" thick #12 pattern acrylic; uplight only,.125" thick KSH 3-E asymmetric lens (to direct light away from wall) Options CO Grounded convenience outlet, 120V only (lower right) 3 AE Brushed aluminum end cap appliques S1 Pull-chain switch; installed bottom left; on/off operation of all lamps only (120V only) 3 S2 Pull-chain switch, on/off operation of forward (down) lamp, rear (up) lamp remote-switched (120V only) 3,4,5 S4 Pull-chain switch; four position front only, rear only, all on, all off; installed bottom left (120V only) 3,4,5 GEB Electronic ballasts, < 20% THD GEB10IS Electronic ballasts, < 10% THD, Instant Start GEB10RS Electronic ballasts, < 10% THD, Rapid Start 2/1 Two 1-lamp ballasts 4,6 BF Internal baffle for up and down light separation N Unswitched night light for 7W C7 lamp; top left 1 NS Night light with push-switch for 7W C7 lamp; top left 1 TPS Tamperproof construction; requires BF MB Matte black finish WH White finish CSA Listed and labeled to comply with Canadian Standards NOM Listed and labeled to comply with Mexican Standards WB 1983 Lithonia Lighting, Rev. 6/00 WB.p65 P.O. BOX A, CONYERS, GEORGIA 30012, TELEPHONE , FAX IN CANADA: TH AVE., LACHINE, QUEBEC H8T 2V3

12 Catalog Number FEATURES & SPECIFICATIONS INTENDED USE For wall or ceiling mounting vertical or horizontal. Ideal for stairwells, corridors, lavatories or any utility application. ATTRIBUTES Easy maintenance design for individual or tandem mounting. For row mounting, order RMT option. CONSTRUCTION Heavy-duty code grade steel. Metal parts are die-formed. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Standard finish is high-gloss, high reflectivety, baked white polyester (architectural black available). OPTICAL SYSTEM Available with high performance A12 pattern clear acrylic or low brightness matte white opal acrylic. Front metal fascia eliminates direct illumination. Provides up/down distribution. ELECTRICAL SYSTEM AWM, TFN or THHN wire used throughout, rated for required temperatures. UL/CSA Listed ballast disconnect with strain relief and leads provided standard. INSTALLATION End caps spring-loaded for easy diffuser removal. LISTING UL Listed to US and Canadian safety standards. Optional: Mexico NOM. WARRANTY Guaranteed for one year against mechanical defects in manufacture. Notes Specifications Length: 24 (609), 36 (914) or 48 (1218) Width: 4-5/8 (118) Depth: 4-9/16 (116) Weight: 14 lbs (6.3 kg) Type Commercial Wall Bracket WC T5 and T8 2', 3' or 4' Lengths 1 or 2 Lamps All dimensions are inches (millimeters). Specifications subject to change without notice. ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: WC MVOLT GEB10IS WC Series WC All purpose wall bracket Number of lamps 1 2 Not included. Lamp type 17 17W T8 (24") 25 25W T8 (36") 32 32W T8 (48") 14 14W T5 (24") W T5 (36") W T5 (48") W T5HO (24") W T5HO (36") W T5HO (48") 2 NOTES: 1 For optional locations, consult factory. 2 All T5 lamp types use GEB10PS ballast only. 3 Includes continuous row joiner band. Not available with CSA; models requiring CSA labeling ship standard with joiner band. Diffuser type (blank) Matte white opal acrylic A12 #12 pattern acrylic FAC Matte white opal acrylic with front metal fascia FA12 #12 pattern acrylic with front metal fascia Voltage MVOLT 1 Others available. Options CO Grounded convenience outlet, 120V only (lower right) 1 S1 Pull-chain switch; installed bottom right; on/off operation of all lamps only (120V only) 1 GEB10IS Electronic ballasts, <10% THD, instant-start GEB10PS Electronic ballasts, <10% THD, program-start MB Architectural black finish RMT Row mount 3 CSA CSA Certified Fluorescent Sheet #: WC WALL-120

13 WC Wall Bracket, All Purpose MOUNTING DATA DIMENSIONS Inches (millimeters). Subject to change without notice. C = 7/8 (22) Dia. K.O. D = 11/16 (18) Dia. K.O. E = 2(51) Dia. K.O. G = 1-1/8 (29) Dia. K.O. PHOTOMETRICS Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Vertical and horizontal illuminance is calculated with fixture mounting 7' above floor. Reflectances 80/50/20%. Full photometric data available upon request. Vert. Horiz. WC 2 32 Report LTL 5736 Initial point illuminance on wall and horizontal work surface (fc) X and Y coordinates are on 12" centers. X A B C D E F G H I J K Y Sheet #: WC 2000 Acuity Brands Lighting, Inc, Rev. 5/6/08 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA Phone: Fax:

14 FEATURES Specification wall bracket for medical applications ideal for hospitals, nursing homes and other patient-care facilities. Die-cast aluminum ends and door with matching aluminum trim door locks open for easy relamping. Woodgrain vinyl trim standard; all-white finish optional. Four-position pull-switch, grounded convenience outlet and light baffle are standard permits up/down light distribution options. Special options and accessories available including examination light, IV arm and night light. Guaranteed for one year against mechanical defects in manufacture. SPECIFICATIONS BALLAST Thermally protected, Class P, HPF, non-pcb, UL listed, CSA certified ballast is standard. Sound rated A. WIRING & ELECTRICAL Fixture conforms to UL 1570 and is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. MATERIALS Parts are die-formed from code-gauge steel. Diecast aluminum ends and extruded aluminum door. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Woodgrain vinyl trim standard. LISTING UL listed and labeled. Listed and labeled to comply with Canadian and Mexican Standards (see options). Specifications subject to change without notice. ENERGY Luminaire Efficacy Rating (LER) and Annual Energy Cost: Fourlamp LER.FW = 59. Annual Energy Cost = $4.09. Based on 32W T8 lamp, 2850 lumens and energy saving electronic ballast. Ballast factor =.88, input watts = 58. Calculated in accordance with NEMA standard LE-5. Type Catalog number Surface Commercial WM Medical Wall Bracket Light 2', 3' or 4' Lengths 2, 3 or 4 Lamps PHOTOMETRICS Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Vertical and horizontal illuminance is calculated with fixture mounted 7' above floor. Reflectances 80/50/20%. Full photometric data available upon request. Vert. Horiz. WM 3 32 A12 GEB Report LTL 5737 Initial point illuminance on wall and horizontal work surface (fc) X and Y coordinates are on 12" centers. X A B C D E F G H I J K Y WM

15 WM Wall Bracket, Medical LIGHT DISTRIBUTION A12 DIMENSIONS Inches (millimeters). Subject to change without notice. Uplight and/or downlight B = 1/4 (6) Dia. K.O. E = 2(51) Dia. K.O. ORDERING INFORMATION Example: WM 3 32 A GEB WM 120 Series WM Medical Wall Bracket Number of lamps 1 2, 3, 3Y, 4 Not included. Lamp type 17 17W T8 (24") 20 20W TS T12 (24") 25 25W T8 (36") 30 30W T12 (36") 32 32W T8 (48") 40 40W T12 (48") Diffuser type/ light distribution A12 #12 pattern acrylic; uplight and downlight,.125" thick 3EA KSH 3-E asymmetric lens (to direct light away from wall) Voltage 120 Options AE Brushed aluminum end cap appliques S2 Pull-chain switch, on/off operation of forward (down) lamp, rear (up) lamp remote-switched (120V only) 2,3 2/1 Two 1-lamp ballasts N Unswitched night light for 7W C7 lamp; top left 2 NS Night light with push-switch for 7W C7 lamp; top left 2 TPS Tamperproof construction GEB Electronic ballasts, <20% THD GEB10IS Electronic ballasts, <10% THD, Instant Start GEB10RS Electronic ballasts, <10% THD, Rapid Start XB Mounting bracket and power supply outlet for examination light IV IV arm assembly; right end mounting QM Quick maintenance mounting; consult factory for 3' versions WH White finish CSA Listed and labeled to comply with Canadian Standards NOM Listed and labeled to comply with Mexican Standards NOTES: 1 Three lamps standard with two lamps bottom, one top. Order 3Y option for one bottom, two top. Example: WM 3Y 32 A For optional locations, consult factory. 3 Requires 2/1 option. 4 Must be ordered in conjunction with XB option. Accessories Order as separate catalog number. XL Examination light, 120V. Uses one medium-base A lamp, 100W maximum. Light gray finish standard. 2,4 XLL Examination light with louver, 120V. Uses one mediumbase A lamp, 100W maximum. Light gray finish standard. 2,4 WM 1983 Lithonia Lighting, Rev. 6/00 WM.p65 P.O. BOX A, CONYERS, GEORGIA 30012, TELEPHONE , FAX IN CANADA: TH AVE., LACHINE, QUEBEC H8T 2V3

16 Catalog Number FEATURES & SPECIFICATIONS INTENDED USE For wall mount vertical or horizontal. Ideal for stairwells, corridors, lavatories or any utility application. ATTRIBUTES Detachable, hinged service tray for ease of installation and maintenance. Night-light options available. Consult factory. CONSTRUCTION Housing is precision die-formed from 20 gauge cold-rolled steel. Diffuser is high-impact 50% DR acrylic. FINISH Five-stage, iron-phosphate pretreatment assures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, high-reflectivity baked white polyester paint after fabrication (PAF). Architectural black 40% gloss finish. OPTICAL SYSTEM High-impact acrylic lower diffuser. Optically engineered for superior light distribution and tinted to mask lamp image and control glare. Easy snap-in installation. ELECTRICAL SYSTEM Thermally-protected, resetting, Class P, HPF, non-pcb, UL Listed, CSA Certified ballast is standard. Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. UL/CSA listed ballast disconnect w/strain relief and leads provided standard. LISTING UL Listed to US and Canadian safety standards. Optional: Mexico NOM. WARRANTY Guaranteed for one year against mechanical defects in manufacture. Notes Specifications Length: 24 (60.96), 36 (91.44) or 48 (121.92) Width: 7-3/16 (18.26) Depth: 3-1/4 (8.26) Premium Wall Bracket WP W Type T5 and T8 2', 3' or 4' Lengths 1 or 2 Lamps All dimensions are inches (centimeters). Specifications subject to change without notice. H ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: WP 2 32 MVOLT GEB10IS WP WP Series Wall bracket Number of lamps 1 2 Not included. Lamp type 17 17W T8 (24") 25 25W T8 (36") 32 32W T8 (48") 14 14W T5 (24") W T5 (36") W T5 (48") W T5HO (24") W T5HO (36") W T5HO (48") 1 Up-light shielding type (blank) #12 pattern inverted 0.125" thick uplight lens ACF125 Matte white 0.125" thick flat acrylic uplight lens PCL12125V #12 pattern, inverted 0.125" thick polycarbonate uplight lens DO Downlight only. Standard highimpact acrylic lower diffuser, solid metal housing NOTES: 1 All T5 lamp types use GEB10PS ballast only. DO shielding type required for all T5 configurations. 2 Must be specified with S2, S4 or BF options. 3 BF option must be specified if separation of up and down light is desired. 4 Requires 2/1 option. 5 For optional locations, consult factory. 6 Supplied with standard high-impact acrylic lower diffuser. Voltage MVOLT Others available. Options 2/1 Two 1-lamp ballasts 2,3 GEB10IS Electronic ballasts, < 10% THD, instant start GEB10PS Electronic ballasts, < 10% THD, program start EL Emergency battery pack (nominal 300 lumens); see Life Safety section GLR Internal fast-blow fuse GMF Internal slow-blow fuse TPS Tamperproof attachment of lower diffuser MB Architectural black finish, 40% gloss BF Internal baffle for up/down light separation 4 CO Convenience outlet; installed bottom right (120V only) 5 S1 Pull-chain switch; installed bottom left; on/off operation of all lamps only (120V only) 5 S2 Pull-chain switch; on/off operation of forward (down) lamp, rear (up) lamp remote-switched (120V only) 4,5 S4 Pull-chain switch; four position front only, rear only, all on, all off; installed bottom left (120V only) 4,5 SWR Rocker switch; on/off operation of all lamps only; installed bottom right (120V only) 5 CSA Listed and labeled to comply with Canadian Standards Accessories Order as separate catalog number. U4220 Hex base driver bit, Torx TX20, for tamper-resistant screws with center pin. Fluorescent Sheet #: WP WALL-140

17 WP Wall Bracket, Premium MOUNTING DATA DIMENSIONS Inches (centimeters). Subject to change without notice. A B C D 24-7/16" (62.07) 8" (20.32) 10-15/16" (27.78) /16" (92.55) 16" (40.64) 16-15/16" (43.02) 4-13/16" (12.22) 48-7/16" (123.03) 16" (40.64) 22-15/16" (58.26) 4-13/16" (12.22) PHOTOMETRICS Photometry derived in accordance with IESNA LM41 procedure. Vertical and horizontal illuminance is calculated with fixture mounted 7' above floor. Reflectances 80/50/20 %. Full photometric data available upon request. WP 2 32 Report LTL 6508 Initial Point Illuminance on wall and horizontal work surface. (fc) X and Y coordinates are on 12" centers. X A B C D E F G H I J K Y Vert Horiz Sheet #: WP 1996 Acuity Brands Lighting, Inc, Rev. 5/20/08 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA Phone: Fax:

18 FEATURES Available in 2', 3' and 4' lengths. Trim, contemporary design. High-gloss white enamel PAF finish standard. Welded 20-gauge steel construction. Convenience outlet and multilevel switching available. Designed for easy installation and maintenance. Ideal for stairwells, vanities and lavatories. Guaranteed for one year against mechanical defects in manufacture. SPECIFICATIONS BALLAST Thermally-protected, Class P, HPF, non-pcb, UL listed, CSA certified ballast is standard. Sound rated A. WIRING & ELECTRICAL Fixture conforms to UL 1570 and is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. MATERIALS Parts are die-formed from code-gauge steel. Lens is 100% virgin acrylic, #12 pattern. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Standard finish is PAF high-gloss, baked white enamel. LISTING UL listed and labeled. Listed and labeled to comply with Canadian and Mexican Standards (see Options). Specifications subject to change without notice. ENERGY Luminaire Efficacy Rating (LER) and Annual Energy Cost: Twolamp LER.FW = 54. Annual Energy Cost = $4.44. Based on 32W T8 lamp, 2850 lumens and energy saving electronic ballast. Ballast factor =.88, input watts = 56. Calculated in accordance with NEMA standard LE-5. Type Catalog number Surface Commercial WS Standard Wall Bracket 2', 3' or 4' Lengths 1 or 2 Lamps PHOTOMETRICS Full photometric reports available upon request. WS

19 WS Wall Bracket, Standard MOUNTING DATA DIMENSIONS Inches (millimeters). Subject to change without notice. C = 7/8 (22) Dia. K.O. E = 2(51) Dia. K.O. R = Keyhole Slot ORDERING INFORMATION Example: WS 2 32 A GEB WS Series Lamp type Diffuser type Voltage Options WS Standard Wall Bracket Number of lamps 1, 2 Not included W T8 (24") 20 20W T12 (24") 25 25W T8 (36") 30 30W T12 (36") 32 32W T8 (48") 40 40W T12 (48") NOTES: 1 MVOLT available with GEB10IS only. 2 For optional locations, consult factory. A12 #12 pattern acrylic A12125 #12 pattern acrylic,.125" thick A19 #19 pattern acrylic,.156" thick Consult Lithonia Lighting sales representative for other shielding options. 120, 277, 347, MVOLT 1 Others available. CO Grounded convenience outlet, 120V only (lower right) 2 S1 Pull-chain switch; installed bottom left; on/off operation of all lamps only (120V only) 2 S4 Pull-chain switch; four position front only, rear only, all on, all off; installed bottom left (120V only) 2 GEB Electronic ballasts, < 20% THD GEB10IS Electronic ballasts, < 10% THD, Instant Start GEB10RS Electronic ballasts, < 10% THD, Rapid Start ES Energy saving ballasts GLR Internal fast-blow fuse EL Emergency battery pack (nominal 300 lumens); see Life Safety section CSA Listed and labeled to comply with Canadian Standards NOM Listed and labeled to comply with Mexican Standards WS 1983 Lithonia Lighting, Rev. 6/00 ws.p65 P.O. BOX A, CONYERS, GEORGIA 30012, TELEPHONE , FAX IN CANADA: TH AVE., LACHINE, QUEBEC H8T 2V3