Ciros P-ID-5200 Pendant-Mounted Indirect/Direct
|
|
|
- Bryan Cooper
- 5 years ago
- Views:
Transcription
1 Type: Project: Ciros P-ID-5200 Pendant-Mounted Indirect/Direct 2 5/8" (67) 2 5/8" (67) Specifications 10 1/2" (267) 10 1/2" (267) U.S. Patent No. D431,086 HOUSING. Two-sided housing, 6063 T6 extruded aluminum. For precise row joining, alignment splines slide into slots at end of housing. END CAPS. Die-cast sculptured aluminum, 4" long, with no holes or knockouts. Required at ends of individual fixtures and ends of rows, finished to match housing. REFLECTORS. Die-formed high-reflectance aluminum for T8 fixtures. Die-formed steel with high-reflectance white finish for T5 and T5HO fixtures. ing. Available in T8, T5 and T5HO for the outer lamp positions and T8 for the inner (center) lamp position(s), BALLAST. Low-profile, Electronic Ballast (LP/ELB), high power factor, thermally protected Class P, Sound Rated A, less than 10% THD, manufactured by a UL Listed manufacturer, as available, determined by Litecontrol. Ballasts with a voltage range of to 277 will be used when fixture configuration and ballast availability allow. The minimum number of ballasts will be used. Tandem wiring. When selected from Ordering guide below, fixtures wired to switch in-line lamps separately, providing two or three levels of light. PRE-WIRING. Fixtures are supplied with # AWG type THHN wire for branch circuits. One end will have factory-installed push-in quick-connects. The other end will be stripped back 1/2" for quick connection in field. For fixtures to accommodate special circuit, such as night light and emergency, in-field wiring will be required. See Pre-Wiring Information for details. ROW JOINING. Litecontrol s at-joint flat strap supporting two fixtures allows simple fixture joining and installation. Support points are centered above the midpoint of joint on seam for aligned, symmetrical appearance. Fixture end headers are threaded in two locations to allow easy row joining without removing reflectors. SYSTEM CONNECTORS. Components to provide system connections between two (corner), three (tee), or four (cross) fixtures are available. Contact factory for details of connectors and suspension hardware required for a specific application. Suspension. Aircraft cable or rigid stem pendants attach to fixture using Litecontrol s easy-hang system, with one attachment plate for use at any support point. FAI/ACC field adjustable 51" is standard. See Aircraft Cables and Stems for details. CERTIFICATION. Fixture and electrical components shall be UL and/or CUL Listed and shall bear the I.B.E.W., A.F. of L. label. Note: Litecontrol reserves the right to change specifications without notice for product development and improvement. Ordering guide Product, ing, & Length P - ID T5HO / 4 8 T8 Mounting P Pendant- Mounted Distribution ID Indirect/ Direct Series 52 Mounting Options - add to end of order number Aircraft Cables FAI/ACC (field adjustable) std. ACC (fixed) Stems P6S (stem) SC/P6 (sloped ceiling) EQ/P6 (earthquake) Cross-section lamping Count 2, 4, 6, 9, notes Nominal Length (ft) 2-T8 3-T8 4-T8 Type T8 T5HO T5 T5HO T5 2-T5HO 2-T5HO and 1-T8 2-T5HO and 2-T8 Count* 1, 2 2, 4 3, 6 notes Nominal Length* (ft) Type* T8 Options PBSS - CWM - TW - LP/ELB- 2CWQ- F - Diffuser Finish Tandem Ballast Pre- Other Volts Wiring Wiring options PBSS PBCWM PBBA PBSS/O PBCWM/O PBBA/O FP PAT.(XA) PRF/O/CWM PRF/O/CSL PRF/O/CBC WSS/O/CWM WSS/O/CSL WSS/O/CBC Diffusers CWM (Matte White) is standard LiteColors in Product Guide for other finishes P-ID-5248T5HO/48T8-PBSS-CWM-TW-LP/ELB-2CWQ-F--FAI/ACC is a typical catalog number for a 4-lamp T5HO/4-lamp T8 (4 lamps in cross-section), 8-foot long T5HO/T8 fixture with parabolic baffles, Matte White finish, tandem-wired low-profile electronic ballast, pre-wired with twocircuit branch wiring and quick-connects, fuse, volts, mounted with field adjustable aircraft cables. -- TW notes LP/ELB is standard LPD/ELB Ballast options 1CWQ 2CWQ F DSR LP/EF 277 Other options notes: Count = total number of lamps in the fixture * for use with fixtures containing two different lamp types For Ordering guide information in shaded areas, choose selection by reading ACROSS the shaded areas for correct specifications. Questions to Ask 1. or 277 volt? 2. Row information? Desired fixture length? 3. Diffuser type? 4. White, LiteColor, or special color? 5. Tandem wiring? 6. Cables or stems, what length? 7. Other options? litecontrol.com
2 Diffusers Photometric data PBSS Parabolic Baffles. Semi-specular, low iridescence anodized aluminum. Cross-blades are.75" high x 1.34" OC. Lengthwise shielding is 32. Recommended for use with T8 lamping. PBCWM Parabolic Baffles finished Matte White. Cross-blades are.75" high x 1.34" OC. Lengthwise shielding is 32. Recommended for use with T8 lamping. PBBA Parabolic Baffles finished Aluminum Gray. Cross-blades are.75" high x 1.34" OC. Lengthwise shielding is 32. Recommended for use with T8 lamping. PBSS/O Parabolic Baffles. Semi-specular, low iridescence anodized aluminum. Cross-blades are.75" high x 1.34" OC. Lengthwise shielding is 32. Matte White acrylic overlay. Recommended for use with T5HO lamping. PBCWM/O Parabolic Baffles finished Matte White. Cross-blades are.75" high x 1.34" OC. Lengthwise shielding is 32. Matte White acrylic overlay. Recommended for use with T5HO lamping. PBBA/O Parabolic Baffles finished Aluminum Gray. Cross-blades are.75" high x 1.34" OC. Lengthwise shielding is 32. Matte White acrylic overlay. Recommended for use with T5HO lamping. FP White Acrylic Diffuser,.100" thick. PAT.(XA) Lens. Diagonal 3/16" conical prisms,.100" thick extruded acrylic. PRF/O/CWM, PRF/O/CSL, PRF/O/CBC Die-formed, 20-gauge steel perforated panels. Pattern has.187" staggered holes.250" OC, 51% open. Available in CWM (Matte White), CSL (Light Silver) or CBC (Camera Black) with white acrylic overlay. WSS/O/CWM, WSS/O/CSL, WSS/O/CBC Die-formed, 20-gauge steel patterned panels. Three 1/2" squares,.718" OC, spaced 1.5" OC. Available in CWM (Matte White), CSL (Light Silver) or CBC (Camera Black) with white acrylic overlay. A. B PRF Diffuser WSS Diffuser 60 6 Ballast options Specify in place of LP/ELB: LPD/ELB Low-profile Dimming Ballast. Manufactured by a UL Listed manufacturer, as available, determined by Litecontrol. Contact factory for availability. C D Other options 1600 F DSR LP/EF Fuse. Slow or fast blow, determined by Litecontrol. Distribution Separator Reflector. Allows fixtures to deliver separate uplight and downlight with three- or four-lamp cross-section. Downlight lamps are one- or two-lamp T8 and, require tandem wiring (TW) to provide separate switching of downlight. No tools required for installation. Finish is Matte White. Low-profile Emergency Fluorescent Ballast. Battery-powered ballast from a UL Listed manufacturer will operate one T8, T5, or T5HO lamp for 1 1/2 hours. Contact factory for availability. Planning for installation Row diagram 9 6 E. F. A. P-ID-5224T8-PBSS-LP/ELB 86.5% Efficiency Indirect/Direct % = 74/26 Litecontrol Certified Test Report # B. P-ID-5234T8-PBSS-LP/ELB 81.1% Efficiency Indirect/Direct % = 80/20 Litecontrol Certified Test Report # Fixture Lengths: 3'-3", 4'-3", 6'-6", 8'-6", '-9" Indicates pendant locations C. P-ID-5224T5HO-PBSS/O-LP/ELB 92.9% Efficiency Indirect/Direct % = 97/3 Litecontrol Certified Test Report # D. P-ID-5224T5HO/14T8-PBSS/O-DSR-LP/ELB 79.1% Efficiency Indirect/Direct % = 87/13 Litecontrol Certified Test Report # E. P-ID-5224T5HO/14T8-PBSS/O-LP/ELB 86.5% Efficiency Indirect/Direct % = 92/8 Litecontrol Certified Test Report # F. P-ID-5224T5HO/24T8-PBSS/0-LP/ELB 85.1% Efficiency Indirect/Direct % = 91/9 Litecontrol Certified Test Report # For photometric information on other combinations, website. Click on Quick Find 52 litecontrol.com 100 Hawks Avenue Hanson MA FAX info@litecontrol.com litecontrol.com
3 PHOTOMETRIC DATA: 2T8 s PHOTOMETRIC DATA: 4T8 s P-ID-5224T8-PBSS-LP/ELB 86.5% Efficiency Litecontrol Certified Test Report # RCR P-ID-5224T8-XA-LP/ELB 91.6% Efficiency Litecontrol Certified Test Report # RCR P-ID-5244T8-PBSS-LP/ELB 81.1% Efficiency Litecontrol Certified Test Report # RCR P-ID-5244T8-PBSS-LP/ELB-DSR 59.8% Efficiency Litecontrol Certified Test Report # RCR
4 PHOTOMETRIC DATA: 3T8 s P-ID-5234T8-PBSS-LP/ELB 81.1% Efficiency Litecontrol Certified Test Report # RCR P-ID-5234T8-PBSS-LP/ELB-DSR 70.6% Efficiency Litecontrol Certified Test Report # RCR P-ID-5234T8-XA-LP/ELB 87.0% Efficiency Litecontrol Certified Test Report # RCR P-ID-5234T8-XA-LP/ELB-DSR 72.4% Efficiency Litecontrol Certified Test Report # RCR
5 PHOTOMETRIC DATA: 2T5HO LAMPS P-ID-5224T5HO-PBSS/O-LP/ELB 92.9% Efficiency Litecontrol Certified Test Report # RCR PHOTOMETRIC DATA: 2T5HO/1T8 LAMP P-ID-5244T5HO/1T8-PBSS/O-DSR-LP/ELB 79.1% Efficiency Litecontrol Certified Test Report # RCR P-ID-5224T5HO/1T8-PBSS/O-LP/ELB 86.5% Efficiency Litecontrol Certified Test Report # RCR QUESTIONS TO ASK: 1. or 277 volt? 2. Row information, including desired fixture lengths? 3. Diffuser type? 4. White, LiteColor or special color? 5. Tandem wiring? 6. Cables or stems, what length? 7. Other options?
6 PHOTOMETRIC DATA: 2T5HO/2T8 LAMPS P-ID-5224T5HO/2T8-PBSS/0-DSR-LP/ELB 72.0% Efficiency Litecontrol Certified Test Report # RCR P-ID-5224T5HO/2T8-PBSS/0-LP/ELB 85.1% Efficiency Litecontrol Certified Test Report # RCR PRE-WIRING INFORMATION Fixtures are supplied with # AWG type THHN wire for branch circuits. One end will have factory-installed push-in quick-connects. The other end will be stripped back 1/2" for quick connection in field. Each quick-connect joins two leads with each lead pushed into the device for a secure, positive connection. Single-circuit option (1CWQ) will contain: (1) black lead wired to ballast(s) black lead for connection to "HOT" feed. (1) white lead wired to ballast(s) white lead for connection to "COMMON" feed. (1) green lead bonded to fixture for connection to "GROUND" feed. Two-circuit option (2CWQ) will contain: (1) black lead wired to ballast(s) black lead for connection to "HOT" feed of one switch leg of circuit. (1) red lead wired to ballast(s) black lead for connection to "HOT" feed of other switch leg of circuit. (1) white lead wired to ballast(s) white lead for connection to "COMMON" feed. (1) green lead bonded to fixture for connection to "GROUND" feed. Pigtails for feed points or ends of rows are not furnished by Litecontrol. NOTE: All unused leads must be capped off. Rated ampacity of feed cords provided by Litecontrol (if applicable) shall be the limiting factor in the number of fixtures that can be fed from a single cord. These standard options do not provide for those installations where special circuits within the fixtures are involved, such as night/emergency, dimming controls, light level sensors, or Master/Slave fixtures. The installing electrical contractor will furnish and install the branch circuit wiring for those fixtures required by the specific situation.
Fixture Type: Project Name: Baffle or Diffuser. Lamp Type. BW FP PARSS (1-lamp D only) PBSS XA 6044 (ADW only) see Baffle and Diffusers Options
W-D-66N 1" (25) 6 1/2" (165) Fixture Type: Project Name: Mod 66 W-D-66N, W-ID-66N, W-ADW-66N (chalkboard) Wall-Mounted Product Description Linear modular luminaire which offers a variety of distributions
Wall/Slot -II 85N Recessed Perimeter
Type: Project: Wall/Slot -II 85N Recessed Perimeter Specifications 10 1/2 (267 ± 19) 9" (229) baffle shown in flush F/position 3 5/8" (92) FIXTURE SUPPORT RAIL. Extruded white aluminum, wall-mounted rail
Cradle to Cradle Silver Certified Fixtures Available for Shipment in 5 Days
Arcos ID Arcos Perf II Cradle to Cradle Silver Certified ixtures Available for Shipment in 5 Days SAE P-ID-900 SAE P-I-9P SAE P-ID-9700 ixture : 2 3/" (60) 9 9/16" (23mm) Arcos Perf II -I-5900 Die-formed
72-P-SD. MOD 72 Pendant Semi-Direct. Ordering Guide. Key Features 72-P-SD. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 72 MOD Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
SDx Pendant Semi-Direct
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 18 SDx Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
44-P-D. MOD 44 Direct Pendant. Ordering Guide. Key Features 44-P-D. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Mounting P Pendant Fixture distribution D Direct Row length (in feet) Enter in foot increments. Note fixture lengths
Verve IV. Suspended linear direct/indirect fluorescent with radial or flat baffle or parabolic louver.
FLUORESCENT BAFFLE/LOUVER radial blade baffle flat blade baffle flat blade parabolic louver DIMENSIONAL DATA FEATURES Suspended linear direct/indirect fluorescent with radial or flat baffle or parabolic
98PF-P-I Perforated Pendant Indirect. Ordering Guide. Key Features 98-P-I-PF. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 98 9800 Housing Style PF Perforated Mounting P Pendant Fixture distribution I Indirect Row length (in feet) Enter in foot
44-P-SD. MOD 44 Pendant Semi-Direct. Ordering Guide. Key Features 44-P-SD. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
Bruno BRM4-1 BRM4-2 BRM4-3. parabolic baffle. Each available with optional acrylic opal overlay.
Indirect / Direct T8 SPECIFICATIONS Pendant Mount Modular / 8 X 2 Rectangular CATALOG NUMBER FT Examples: 2 32 SPR 40FT R8 277 GEB0 DCT LP835 F/8 SCEP 3 32 SPR 32FT R8 277 GEB0 SE EL DCT LP835 F/2 AVAILABLE
44-R. MOD 44 Recessed. Ordering Guide. Key Features. Fixture Type: Project Name: Quick Find litecontrol.com 44-R
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Ceiling Type DW Drywall PT Drywall with Plaster Trim LG 15/16 Grid Fixture distribution D Direct Row length (in
Seem 6. Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic.
Seem 6 FLUORESCENT GRID parabolic louver DIMENSIONAL DATA grid 5.53" 14.6mm FEATURES Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted
34-W. V3 Adjustable Wall Valence. Ordering Guide. Key Features. Fixture Type: Project Name: Quick Find litecontrol.com 34-W
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 34 V3 Mounting W Wall Mounted Fixture distribution AI Asymmetric Indirect AID Asymmetric Indirect/Direct ASD Asymmetric
Bruno. dimensions / lamping. specifications. Die-formed cold-rolled steel housing. Die-cast aluminum flat or sculptured end cap.
Bruno Responding to a present-day penchant for classic rectilinear forms, Peerless Bruno moves front and center with its pure, low-profile shape and superlative indirect optics. Unique downlight design
seem 4 grid features dimensional data performance
grid seem features Narrow " aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted acrylic flush lens provides even illumination, high performance
Catalog No. SHIELDING
I T E C T U R A L A R C H S E N S O R S PROJECT INFORMATION Project Name Catalog No. Type Date FEATURES Crisp shape with clean, elegant lines Direct/Indirect lighting elements Up to 3T8, T5 or T5HO lamps
2 1 /8" 2 1 /8" Use guide below to order complete fixture runs from four feet to three-hundred feet in increments of four.
LIGHTDUCT DIMINUTIVE INDIRECT Pendant Mount - Modular AVAILABLE FIXTURES 6 X 2 Rounded LDM1-1 LDM1-2 LDM1-3 Housing AA 6063 T6 extruded aluminum forming a x rounded channel. Die-cast end plate attaches
44-R-WWD. MOD 44 Recessed Wall Wash Direct. Ordering Guide. Key Features 44-R-WWD. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Wall Wash Ceiling Type DW Drywall PT Drywall with Plaster Trim LG 15/16 Grid Fixture distribution WWD Wall Wash
dimensions / lamping performance Voltage Ballast Type # of Emergency Modules GEB <20% THD Electronic (T8 only) GEB10 <10% THD Electronic Ballast
Lightline In the universe of high-performance linear lighting, nothing is as minimally dimensioned as Lightline. With a family of indirect, direct and recessed luminaires designed to fit any space, feel
Specular louver Semispecular. PRF Perforated Top Cover SLD Solid Top Cover. louver. FUS GLR fuse for each ballast
Photometric Drawing for (1) 28W T5 Lamp CATALOG NUMBER FIXTURE OVERALL ROW LENGTH MAX SECTION LENGTH SHIELDING TOP COVER LAMPING (SEE CROSS SECTION) VOLTAGE OPTIONS* ET1S Enthuse Surface-mount # # must
2 Photocell option available in endcap, tenon or corner assembly. 81.8% Efficiency. Nominal Row Length R4 R8 R12. X FT Must be in 4 increments
SPECIFICATIONS Construction Die-formed, pre-painted steel housing. Extruded aluminum fillers. Die-cast aluminum end caps. Highly specular aluminum end plates. Shielding GrateOptic curved, crenulated diffuser
Seem mm 4.50" 4.00" 101.6mm. Narrow 4" linear fluorescent allows for both individual or continuous runs.
FLUORESCENT recessed companion wall mount companion DIMENSIONAL DATA FEATURES Narrow 4" linear fluorescent allows for both individual or continuous runs. Frosted acrylic flush lens provides even illumination,
nar o (năr ō) adj. small or slender in width, especially compared with length <linear fluorescent lamp, golf club, fettuccine, kate moss>
nar o (năr ō) adj. small or slender in width, especially compared with length don t worry, our design skills far exceed our spelling aptitude.
Notes: Indirect. 5 1/2" 140mm. 5 1/32 128mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct / Indirect Direct Indirect 5 1/2" 14mm 5 1/2" 14mm 5 1/2" 14mm SHOWN WITH LENS OPTION 5 1/32 128mm ORDERING CODE 5 1/32 128mm 5
solana semi-indirect indirect Low profile pendant with adjustable optics
semi-indirect indirect pendant Low profile pendant with adjustable optics Indirect lighting reduces glare and harsh shadows creating a comfortable environment and improving human performance. Lam Lighting
Notes: 2 3/8" 60mm. (1) One lamp with satin lens only (2) Not available for T8 Add 9 per lamp. Specify quantity Requires 120V or 277V
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 2 3/8" 60mm ORDERING CODE 9 3/4 248mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
Capable and versatile, the specification-grade LUMINATA II is an elegant lighting solution.
Capable and versatile, the specification-grade LUMINATA II is an elegant lighting solution. Sculpted end Extended end Conveying a strong sense of performance and aesthetic appeal, the suspended LUMINATA
RPX. Specular louver Semispecular RSX. louver. FUS GLR fuse for each ballast IDS
Photometric Drawing for (1) 28W T5 Lamp CATALOG NUMBER FIXTURE OVERALL ROW LENGTH MAX SECTION LENGTH SHIELDING LAMPING (SEE CROSS SECTION) VOLTAGE OPTIONS* EF1P Enform 1 Pendant # # must be specified in
BRUNO BRUNO. Keep a Low Profile with No-Nonsense Minimalism.
BRUNO BRUNO Keep a Low Profile with No-Nonsense Minimalism. Inspired by minimalist master Mies van der Rohe, the Bruno family celebrates the spirit of less-is-more modernism. Designed to achieve a no funny
WALL MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW 9" 229mm 3 3/4" 95mm 4 3/4 121mm 7 1/8 181mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 CENTER OPTICS
Avenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm 4.3" 109.22mm
Avenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
Avenue A FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm
Bionic Perimeter Standard C o v e & P e r i m e t e r
Type Job Name Catalog Number Bionic Perimeter Standard C o v e & P e r i m e t e r 5 7 /16" 110mm 6 7 /16" 170mm 8 7 /16" 221mm Flush Regress 3" Regress ordering - BIO-PSTD (STANDARD) series/ style lamp
Lighting Systems Argus-7
Page 1 of 5 1 1. (3.5cm) 1.7 (4.3cm) 4 5 Rectilinear 3 1.81 (4.6cm) Extruded Linear Louver.5 (.64cm) 5. (1.7cm) 9. (.86cm) 1 1. (3.5cm) 1.7 (4.3cm) 4 5 Tapered 3 1.81 (4.6cm).75 (.7cm) Feature Specifications
131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 131 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x.0l x 4.0Dp (0 x 1220 x 100) LAMP 1 or 2 lamp
avenue features dimensional data performance Narrow 3" slot T5 fluorescent with opaque satin lens.
features Narrow 3" slot T5 fluorescent with opaque satin lens. Shielding options include corrugated, solid regressed trim, concave louver as well as flush lens. Drywall installation is availale, which
131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x 48.0L x 4.0Dp (300 x 1220 x 100) LAMP 1 or 2 lamp
RECESSED WALL WASH MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 13/32 4 3/8" 4" IC culus Listed Type I.C. SHOWN WITH LENS OPTION ORDERING CODE 2 15/16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PRODUCT SPECIFICATIONS
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M
PROJECT: TYPE: NOTES: DESCRIPTION Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. Softly curved, Axle measures just 2 11/16" by 3 11/16". With
Notes: (1) not recommended with staggered lamping (2) Not available with T8 lamping.
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEW 3 5/8" 92mm 2 1/4 57mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH (FT)
Notes: 3 1/2" 89mm. 1/2" 13mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 1/2" 13mm 3 1/2" 89mm 12 35mm ORDERING CODE 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LIGHT DISTRIBUTION
EX3. Project Name _ K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EDGE EX3 Project Name Date Type SUSPENDED DIRECT LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
Knife & Rail. LED Indirect/Direct Pendants. Contains Variable Intensity Technology
Knife & Rail LED Indirect/Direct Pendants Contains Variable Intensity Technology Variable Intensity Technology What It Is Litecontrol s Variable Intensity (Vi) technology module allows specification of
EX3B. Project Name _ K 4000K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EX3B Project Name Date Type SUSPENDED BIDIRECTIONAL LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
EDGE EX1 1 Suspended Direct Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended Direct Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M PROJECT: TYPE: NOTES: DESCRIPTION Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution.
HSN, HSM, HIS, IC, TN, CC and IW Series
Miro 4 Enhanced Aluminum Reflector HSN, HSM, HIS, IC, TN, CC and IW Series Holophane offers a variety of industrial luminaires for a wide range of applications from the most demanding specialized industrial
FINA F48B 48 Direct and Uplight Architectural Round
Project Name Date Type FINA F48B 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish
EDGE EX6WET 6 Suspended Direct Linear WET
Project Name Date Type 4-11/16 (119mm) EDGE EX6WET 6 Suspended Direct Linear WET 5-3/4 (146mm) 5/16 (8mm) Key Features Approved for wet location unless otherwise noted. IP65 and IK10 rated Fixture is built
Notes: 3 13/32. (5) Please consult factory (6) Available with T8 lamp only
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct Indirect 3 13/32 ORDERING CODE 3 13/32 SHOWN WITH LENS OPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT
EDGE EX1B 1 Suspended Bidirectional Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended idirectional Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
RECESSED ASYMMETRIC MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 5" SHOWN WITH LENS OPTION 3 13/32 ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3
Notes: Please specify
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS NARROW 2 1/8" 54mm 6 152mm WIDE 2 1/8" 54mm ORDERING CODE 8 3/4 222mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS (1)
EDGE EX3B-WW 3 Suspended Bidirectional Linear Wall Wash
Project Name Date Type 5-3/8 (136.5mm) EDGE EX3B-WW 3 7/16 (11.1m) 3-1/2 (88.9mm) 11/16 (17.5m) Key Features 6063-T5 Extruded aluminum housing Extruded aluminum module with miro reflector for perfect wall
EDGE EX33 3 x 3 Suspended Direct Linear
Project Name Date Type 3-1/4 (82.6mm) 3 x 3 Suspended Direct Linear 2-1/4 (57.2mm) 2-7/8 (73mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring
FINA F48 48 Direct and Uplight Architectural Round
Project Name Date Type 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with
Apollo 8. lamping. patient bed pair example. 8" wide recessed patient bed light with exam function available in 2', 3' & 4' lengths.
FLUORESCENT RECESSED PATIENT BED LIGHT SYSTEM apollo 8 ambient only integral LED apollo 1 & 2 companion DIMENSIONAL DATA FEATURES 8" wide recessed patient bed light with exam function available in 2',
Fluorescent Lamp Wattages. Fluorescent Optics T5 = F14 (2') F21 (3',6') F28 (4',8') NB Narrow Beam (60 ) WB Wide Beam (100 )
INDOOR R FLUORESCENT INDOOR R FLUORESCENT SMS/SMM MOUNT Prefix Mounting Optics Light Source & Wattage LIN = Linea SMS-U Surface, Uplight, SMM-U Surface, Uplight, Multiple Fixture Run SMS-D Surface, Downlight,
FINA F36B 36 Bidirectional Architectural Round
Project Name Date Type FINA F36B 36 Bidirectional 4-1/2 4-7/8 (114.3mm) (123.8mm) 33-15/16 (862mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with 1/4 trim Aluminum
seem 4 suspended led features dimensional data mounting information performance Narrow extruded aluminum 4 linear direct LED.
suspended led features Narrow extruded aluminum 4 linear direct LED. Individual units and continuous runs in 1 increments. Continuous frosted acrylic lens provides uninterrupted illumination, without pixels
architectural ambient indoor
architectural ambient indoor brand profile Founded in 2000 in Spokane, WA Serves the indoor commercial, educational, retail, health care, and institutional marketplaces Exceptional array of architectural
EDGE EX2 2 Direct Suspended Linear
Project Name Date Type 4-3/4 (120.7mm) EDGE EX2 2 Direct 2-1/4 (57.2mm) 2-7/8 (73mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring access available
PENDANT INDIRECT - WITH ACCENT OPTION 3 1/32. dia
Project Type Notes Linear option shown Kit option shown PERFORMANCE Semi-Recessed Extended Pivoted Semi-Recessed Extended Beam Spread 24º 36º 60º 1 3/4 1 3/4 CBCP 2287 cd 796 cd 446 cd 1/2 Ordering Guide
Avenue A. Grid Mount (Open Shown) Drywall Flange (Open Shown) louver lens mr16
FLUORESCENT MR16 open optic cut-off louver clear lens flush mount mr16 (35 adjustment) extended yoke mr16 ( adjustment) snoot hex louver linear prismatic sand blasted soft focus DIMENSIONAL DATA Grid Mount
EDGE EX44 4 x 4 Suspended Direct Linear
Project Name Date Type 4 (101.6mm) EDGE EX44 4 x 4 Suspended Direct Linear 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
Nera. detail. fixture information. Unique aesthetic inspired by the visual void design philosophy. Luminaire sizes available in 2 x2, 3 x3 and 4 x4.
LED bottom detail inside lens detail white finish palladium finish 2016 DIMENSIONAL DATA FEATURES Unique aesthetic inspired by the visual void design philosophy. Luminaire sizes available in 2 x2, 3 x3
apollo 8 patient bed light with LED options features dimensional data performance
patient bed light with LED options features 8" wide recessed patient bed light with LED options available in 4' & 5' lengths. T5 or T8 lamps provide reading and ambient illumination, additional T5HO lamps
REVO LED PENDANT DIRECT/INDIRECT W W W. L U M E N W E R X. C O M
DESCRIPTION PROJECT: The Revo pendant offers a fresh interpretation of a classic shape, both attractive and functional. Just 2 3/8" TYPE: in diameter, Revo delivers precise and well shielded illumination
2LP3GA217R-33FL-UNV-1/2-EBHE-LPT835HL
Recessed Project: Location: Cat.No: LP3 paralouver 2x2 Type: Lamps: Notes: Qty: 2 Lamp, T8, T5, or T5HO 9 or 16 cell The Philips Day-Brite / Philips CFI LP3 paralouver recessed is designed to provide the
HP90 Recessed 2'X2' Fluorescent; T8, T5, T5HO or TT5
Page 1 of 5 Emergency Pack 1 5" (127mm) 24" (610mm) 2-1/2" (64mm) 2" X 2-1/2" Wiring access plate with (2) 7/8" dia. K.O.'s Ordering Information HP90 H9 Direct/Indirect Recessed Fluorescent Body Style
VERSYS Architectural Recessed T5 Fluorescent
TM VERSYS Architectural Recessed T5 Fluorescent VERSYS A revolutionary versatile system that seamlessly integrates vital building systems, high efficiency lighting and visual comfort into one exquisite
EDGE EX3I 3 Suspended Indirect Linear
Project Name Date Type 5-/2 (40mm) EDGE EX3I 3 3-/2 (88.4mm) Key Features 6063-T6 Extruded aluminum housing Highly reflective = white painted reflector Room side maintance for LED system 5-year limited
VIA 4 LED PENDANT DIRECT/INDIRECT W W W. L U M E N W E R X. C O M
ORDER GUIDE Shown with HLO optics DESCRIPTION PROJECT: Via 4 is the flexible linear LED luminaire system for pendant, surface and recessed or in-wall installation, TYPE: whether as discrete luminaires,
LS4L-P-D. Litespeed MOD 4 LED Pendant Direct. Ordering Guide. Performance LITESPEED LS4L-P-D. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 4L MOD Mounting P Pendant Fixture distribution D Direct Row length (in feet) Enter in foot increments. Note fixture lengths
Evolution Outline RECESSED LINEAR PERIMETER OUTLINE SLOT SYSTEM
Evolution Outline Project Name Date Type RECESSED LINEAR PERIMETER OUTLINE SLOT SYSTEM 4-1/2 (114.3mm) 5-1/4 (133.4mm) LED Product Partner Extruded aluminum trim with formed cold rolled 20 gauge steel
EDGE EX4B 4 Suspended Bidirectional Linear
Project Name Date Type 4-3/4 (120.7mm) EDGE EX4 4 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Room-Side Maintenance
SLIM PENDANT DIRECT. Project. Type. Notes. Ordering Guide PERFORMANCE PER LINEAR FOOT AT 3500K 1 / 8. axislighting.com. Shown with VL optic
Project Type Notes Shown with SO lens Shown with louver Shown with VL optic PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 1 3/8" up/1down at 8 lm/ft
Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire
Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire For additional configurations see our Product Catalog or visit our website at WINDIRECT TM 3 in1 Dual Lamp Ceramic Metal Halide CMH x 2 1
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and s NEMA 4X UL 1598 Wet & s CUL IP65 NSF Enclosure N M F 2 339 NMF2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent
3 1/32. dia. If application includes Accents and separate controls, select 2 circuits.
Project Type Notes Linear option shown Kit option shown PERFORMANCE Semi-Recessed Extended Pivoted Semi-Recessed Extended Beam Spread 1 3/4 1 3/4 24º 36º 60º CBCP 2287 cd 796 cd 446 cd 1/2 3 1/32 3 1/32
EDGE EV3WET 3 Recessed Linear WET
Project Name Date Type 4-13/16 (122mm) EDGE EV3WET 3 3-11/16 (94mm) 4-3/4 (121mm) 5/16 (8mm) Key Features Approved for wet location unless otherwise noted. IP65 and IK10 rated Fixture is built using corrosion
EDGE EX3 3 Suspended Direct Linear
Project Name Date Type 5-3/8 (36.5mm) EDGE EX3 3 Suspended Direct Linear 3-/2 (88.9mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring access
Seem 4. Narrow extruded aluminum 4" linear direct/indirect LED with Pop-lens options.
LED DIRECT/INDIRECT flush lens top & bottom pop-up lens & pop-down lens pop-up lens & flush lens bottom end detail single point corner suspension linear direct only companion wall to ceiling corner companion
Horizon Patient Bed Light LED and Fluorescent Solutions
Horizon Patient Bed Light LED and Fluorescent Solutions Horizon is the perfect blend of design, performance and durability. An aesthetically-pleasing form that minimizes the visual impact in the space.
Verve IV. fixture information. Suspended linear direct/indirect LED with frosted lens or Radial Baffle options.
LED radial blade baffle wall mount companion DIMENSIONAL DATA FEATURES Suspended linear direct/indirect LED with frosted lens or Radial Baffle options. One-piece steel housing with 5" die-cast end caps
LINERO L_6A Suspended Linear
Project Name Date Type LINERO L_6 -/8 (28.6mm) -9/6 (39.7mm) -/8 (28.6mm) -3/6 (39.7mm) 6-9/6 (66.2mm) 6-7/8 (74.6mm) Key Features One piece die-formed 8 gauge steel housing Highly reflective die-formed
J TO 4000 LUMEN 8 LED CYLINDER HYPERBOLIC/PARABOLIC/WALLWASH OPEN APERTURE LC8 SERIES DIMENSIONS 1-1/4
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Lumen packages suitable for ceiling heights ranging from 8 to over 50 Efficacies up to 80 lm/w Superior-quality white LED light output using Chip on Board technology
Photometric Drawing for (1) T5L-1T528 VOLTAGE MOUNT OPTIONS v v
Photometric Drawing for (1) T5L-1T528 CATALOG NUMBER FIXTURE ING (SEE CROSS SECTION) VOLTAGE MOUNT OPTIONS T5L Tool T5 (no shielding) 1T528 1T521 1T514 1x28w T5 1x21w T5 1x14w T5 120 120 v 277 277 v PEN
MHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT
MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting
MEDMASTER DOWNLIGHT Luminaires for Surgical Applications
PRODUCT FEATURES: 6" sealed, recessed downlight with regressed or flush lens trim Conducted emissions controlled as per MIL-STD-461F Delivered lumens: 794-5,543 lm 1% Dimming via 0-10V, DALI or EcoSystem
avenue led features dimensional data performance Narrow 3" slot LED with frosted satin lens.
led features Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid regressed trim or flush lens. Avenue B LED allows ceiling tiles to rest on fixture rails, keeping
32L-CR-P-D. Inde-Pendant Pendant Direct. Ordering Guide. Key Features 32L-CR-P-D. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 32L Inde-Pendant Configurations CR20 Cylinder + 20" Diameter CR30 Cylinder + 30 Diameter CR40 Cylinder + 40 Diameter Mounting
MHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations
MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine
PENDANT ASYMMETRIC MOUNT - DIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K 3 3 /8 3 3 /8 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 5 lm/ft 4.5 W/ft 11 lm/w 6 lm/ft 5.5 W/ft 19 lm/w 75 lm/ft 6.9 W/ft 16 lm/w 1 lm/ft 9.4 W/ft
MHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent
MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations
Cubic SurroundLite TM
Project Type Notes Spotless lens VL Optic Louver PERFORMANCE PER LINEAR FOOT AT 35K (VL) SO - Spotless lens NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 75up/25down at 8 lm/ft 6 lm/ft
DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution.
DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. TYPE: Softly curved, Axle measures just NOTES: 2 11/16" by 3 11/16". With
COLOR/ FINISH VOLTAGE OPTIONS UNV ( ) YGW Gloss White (Standard) Y Premium Color CC Custom Color GLV Galvanized COLOR/ FIN- ISH
Type: Job: 11/4 23/8 23/8 23/8 STD 17/8 25/8 33/8 AR/ARP SR/ SRP 3 3 W W-SS 17/8 21/4 WA WG A narrow 2-lamp T8 strip light with an integral ballast. It is available with a choice of perforated or solid,
PENDANT MOUNT - DIRECT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K CABLE 2 1 /4 STEM 2 1 /4 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.7 W/ft 16 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 1 lm/ft
Project. Type. Notes. (1) D dimming (0-10V) 5% standard
Project Type Notes PERFORMANCE AT 35K NOMINAL LUMEN OUTPUT TOTAL lm/ft INPUT WATTS EFFICACY UP DOWN 125 lm/ft 1 lm/ft 225 lm/ft 26 W/ft 87 lm/w 1 lm/ft 1 lm/ft 2 lm/ft 23 W/ft 89 lm/w 1 lm/ft 5 lm/ft 15