2 1 /8" 2 1 /8" Use guide below to order complete fixture runs from four feet to three-hundred feet in increments of four.
|
|
- Jonas Mitchell
- 5 years ago
- Views:
Transcription
1 LIGHTDUCT DIMINUTIVE INDIRECT Pendant Mount - Modular AVAILABLE FIXTURES 6 X 2 Rounded LDM1-1 LDM1-2 LDM1-3 Housing AA 6063 T6 extruded aluminum forming a x rounded channel. Die-cast end plate attaches with no exposed fasteners. Die-formed reflectors combine hammertone specular aluminum and baked white enamel (nominal reflectance 86%). FINISH Satin anodized or white paint standard; custom colors available. Specify 120 volt or 277 volt. Pre-wired with prescribed circuits and with UL listed. Listed and labeled to comply with Canadian standards. For special circuiting, consult factory. T5 high-output lamps are included. FIXTURE LENGTH 4, 8, and 12 lengths in a single section for exact suspension spacing of 4, 8, and 12. For total fixture length add 5-1/2 for each end-cap. Using internal joiners, 4, 8, and 12 sections can be joined to form longer-length fixtures. Note: Custom lengths available; see page D-9 for details or consult factory. ORDERING LOGIC Use guide below to order complete fixture runs from four feet to three-hundred feet in increments of four. Quantity LDM1 Fixture # of Lamps in Cross Section Lamp Type 54T5HO FT Nominal Row Length (Must be in 4' increments)* Maximum Section Length Voltage Ballast Type # of Emergency Sections (sections per run)(optional)** Emergency Type (optional)*** Switching Lamp Color Mounting Type / Feed/Suspension Length Finish Options R4-4' section R8-8' section R12-12'section GEB10-10% THD Ballast (consult factory) 1SE- 1 section 2SE- 2 sections XSE- X sections EL- Emergency Battery Pack EC- Emergency Circuit SCT- Single Circuit DCT- Dual Circuit ACG- Adjustable Cable Grippers GLR- Fast Blow Fuse GMF- Slow Blow Fuse C100- Satin Anodized Finish C200- Peerless Standard White (Low Gloss) C005- Soft White (Low Gloss) C032- White White (Gloss) C041- White White (Low Gloss) CXXX- Custom Color (consult factory) *Also available in custom lengths; see D-9 for further information, or consult factory. ** Maximum # of emergency sections per run equals number of fixture sections, minus one. For additional sections, consult factory. ***EC and EL not available concurrently. EL and EC not available with DCT in 4 sections. Separate feed required. EXAMPLE: Qty Fixture section 4 LDM1 1 54T5HO 40FT R GEB10 2SE EL SCT LP835 F1/24 C005 1 LDM1 3 54T5HO 12FT R GEB10 DCT L/LP F2/15 C041 ACG L/LP- No lamp LP K lamps LP K lamps LP K lamps F1- T-bar Ceiling F2- Hard Ceiling Horizontal J-box 12-12" overall suspension 15-15" overall suspension 18-18" overall suspension 21-21" overall suspension 24-24" overall suspension XX- XX" overall suspension All rights reserved. Peerless is a registered trademark and Lightduct is a trademark of. D-1
2 LIGHTDUCT DIMINUTIVE INDIRECT Pendant Mount - Modular T5 HIGH-OUTPUT 6 X 2 Rounded PHOTOMETRICS 2-LAMP T5 HIGH-OUTPUT 3-LAMP T5 HIGH-OUTPUT % % % Maximum Flux Location Luminaire Efficiency 87% 2-LAMP % % Luminaire Efficiency 84% 3-LAMP % % % Luminaire Efficiency 83% D All rights reserved. Peerless is a registered trademark and Lightduct is a trademark of.
3 LIGHTFIN DIMINUTIVE INDIRECT 6 X 2 Angular Pendant Mount Modular AVAILABLE FIXTURES LFM1-1 LFM1-2 LFM1-3 Housing AA 6063 T6 extruded aluminum forming a x angular channel. Die-cast end plate attaches with no exposed fasteners. Die-formed reflectors combine hammertone specular aluminum and baked white enamel (nominal reflectance 86%). FINISH Satin anodized or white paint standard; custom colors available. Specify 120 volt or 277 volt. Pre-wired with prescribed circuits and are UL listed. Listed and labeled to comply with Canadian standards. For special circuiting, consult factory. T5 high-output lamps are included. FIXTURE LENGTH 4, 8, and 12 lengths in a single section for exact suspension spacing of 4, 8, and 12. For total fixture length add 4-1/2 for each end-cap. Using internal joiners, 4, 8, and 12 sections can be joined to form longer-length fixtures. ORDERING LOGIC Use guide below to order complete fixture runs from four feet to three-hundred feet in increments of four. Note: Custom lengths available; see page D-27 for details or consult factory. Quantity LFM1 Fixture # of Lamps in Cross Section Lamp Type 54T5HO FT Nominal Row Length (Must be in 4' increments)* Maximum Section Length Voltage Ballast Type # of Emergency Sections (sections per run)(0ptional)** Emergency Type (0ptional)*** Switching Lamp Color Mounting Type / Feed/Suspension Length Finish Options R4-4' section R8-8' section R12-12'section GEB10-10% THD Ballast (consult factory) 1SE- 1 section 2SE- 2 sections XSE- X sections EL- Emergency Battery Pack EC- Emergency Circuit SCT- Single Circuit DCT- Dual Circuit ACG- Adjustable Cable Grippers GLR- Fast Blow Fuse GMF- Slow Blow Fuse C100- Satin Anodized Finish C200- Peerless Standard White (Low Gloss) C005- Soft White (Low Gloss) C032- White White (Gloss) C041- White White (Low Gloss) CXXX- Custom Color (consult factory) *Also available in custom lengths; see D-27 for further information, or consult factory. ** Maximum # of emergency sections per run should not exeed number of fixture sections, minus one. For additional sections, consult factory. ***EC and EL not available concurrently. EL and EC not available with DCT in 4 sections. Separate feed required. EXAMPLE: Qty Fixture 4 LFM1 1 54T5HO 40FT R GEB 2SE EL SCT LP 835 F1/24 C005 2 LFM1 2 54T5HO 32FT R8 120 GDIM DCT LP830 F1/12 C200 GLR L/LP- No lamp LP K lamps LP K lamps LP K lamps F1- T-bar Ceiling F2- Hard Ceiling Horizontal J-box 12-12" overall suspension 15-15" overall suspension 18-18" overall suspension 21-21" overall suspension 24-24" overall suspension XX- XX" overall suspension All rights reserved. Peerless and Lightfin are registered trademarks of. D-19
4 LIGHTFIN DIMINUTIVE INDIRECT 6 X 2 Angular Pendant Mount Modular T5 HIGH-OUTPUT PHOTOMETRICS 2-LAMP T5 HIGH-OUTPUT 3-LAMP T5-HIGH OUTPUT % % % Maximum Flux Location Luminaire Efficiency 87% 2-LAMP % % Maximum Flux Location Luminaire Efficiency 84% 3-LAMP % % % Luminaire Efficiency 83% D All rights reserved. Peerless and Lightfin are registered trademarks of.
5 LIGHTDUCT DIMINUTIVE INDIRECT/OPEN Pendant Mount - Modular AVAILABLE FIXTURES 6 X 2 Rounded LDM2-1 LDM2-2 LDM2-3 Housing AA 6063 T6 extruded aluminum forming a x rounded channel. Die-cast end plate attaches with no exposed fasteners. Die-formed reflectors combine hammertone specular aluminum and baked white enamel (nominal reflectance 86%). SHIELDING Opal acrylic overlay above die punched slot pattern in aluminum housing. FINISH Satin anodized or white paint standard; custom colors available. Specify 120 volt or 277 volt. Pre-wired with prescribed circuits and with UL listed. Listed and labeled to comply with Canadian standards. For special circuiting, consult factory. T5 high-output lamps are included. FIXTURE LENGTH 4, 8, and 12 lengths in a single section for exact suspension spacing of 4, 8, and 12. For total fixture length add 5-1/2 for each end-cap. Using internal joiners, 4, 8, and 12 sections can be joined to form longer-length fixtures. Note: Custom lengths available; see page D-9 for details or consult factory. ORDERING LOGIC Use guide below to order complete fixture runs from four feet to three-hundred feet in increments of four. Quantity LDM2 Fixture # of Lamps in Cross Section Lamp Type 54T5HO Nominal Row Length (Must be in 4' increments)* FT Maximum Section Length Voltage Ballast Type # of Emergency Sections (sections per run)(optional)** Emergency Type(optional)*** Switching Lamp Color Mounting Type / Feed/Suspension Length Finish Options R4-4' section R8-8' section R12-12' section GEB10-10% THD Ballast (consult factory) *Also available in custom lengths; see D-9 for further information, or consult factory. ** Maximum # of emergency sections per run should not exceed number of fixture sections, minus one. For additional sections, consult factory. ***EC and EL not available concurrently. EL and EC not available with DCT in 4 sections. Separate feed required. EXAMPLE: Qty Fixture section 4 LDM2 1 54T5HO 40FT R GEB10 2SE EL SCT LP835 F1/24 C005 1 LDM2 3 54T5HO 12FT R GEB10 DCT L/LP F2/15 C041 ACG 1SE- 1 section 2SE- 2 sections XSE- X sections EL- Emergency Battery Pack EC- Emergency Circuit SCT- Single Circuit DCT- Dual Circuit L/LP- No lamp LP K lamps LP K lamps LP K lamps F1- T-bar Ceiling F2- Hard Ceiling Horizontal J-box ACG- Adjustable Cable Grippers GLR- Fast Blow Fuse GMF- Slow Blow Fuse C100- Satin Anodized Finish C200- Peerless Standard White (Low Gloss) C005- Soft White (Low Gloss) C032- White White (Gloss) C041- White White (Low Gloss) CXXX- Custom Color (consult factory) 12-12" overall suspension 15-15" overall suspension 18-18" overall suspension 21-21" overall suspension 24-24" overall suspension XX- XX" overall suspension All rights reserved. Peerless is a registered trademark and Lightduct is a trademark of. D-3
6 LIGHTDUCT DIMINUTIVE INDIRECT/OPEN Pendant Mount - Modular T5 HIGH-OUTPUT 6 X 2 Rounded PHOTOMETRICS 2-LAMP T5 HIGH-OUTPUT 3-LAMP T5 HIGH-OUTPUT % % % Maximum Flux Location Luminaire Efficiency 84% 2-LAMP % % Luminaire Efficiency 80% 3-LAMP % % % Luminaire Efficiency 82% D All rights reserved. Peerless is a registered trademark and Lightduct is a trademark of.
7 LIGHTFIN DIMINUTIVE INDIRECT/OPEN Pendant Mount Modular AVAILABLE FIXTURES 6 X 2 Angular LFM2-1 LFM2-2 LFM2-3 Housing AA 6063 T6 extruded aluminum forming a x angular channel. Die-cast end plate attaches with no exposed fasteners. Die-formed reflectors combine hammertone specular aluminum and baked white enamel (nominal reflectance 86%). SHIELDING Opal acrylic overlay above die punched slot pattern in aluminum housing. FINISH Satin anodized or white paint standard; custom colors available. Specify 120 volt or 277 volt. Pre-wired with prescribed circuits and are UL listed. Listed and labeled to comply with Canadian standards. For special circuiting, consult factory. T5 high-output lamps are included. FIXTURE LENGTH 4, 8, and 12 lengths in a single section for exact suspension spacing of 4, 8, and 12. For total fixture length add 4-1/2 for each end-cap. Using internal joiners, 4,8, and 12 sections can be joined to form longer-length fixtures. Note: Custom lengths available; see page D-27 for details or consult factory. ORDERING LOGIC Use guide below to order complete fixture runs from four feet to three-hundred feet in increments of four. Quantity LFM2 Fixture # of Lamps in Cross Section Lamp Type 54T5HO FT Nominal Row Length (Must be in 4' increments)* Maximum Section Length Voltage Ballast Type # of Emergency Sections (sections per run)(0ptional)** Emergency Type (0ptional)*** Switching Lamp Color Mounting Type / Feed/Suspension Length Finish Options R4-4' section R8-8' section R12-12'section GEB10-10% THD Ballast (consult factory) *Also available in custom lengths; see D-27 for further information, or consult factory. ** Maximum # of emergency sections per run should not exeed number of fixture sections, minus one. For additional sections, consult factory. ***EC and EL not available concurrently. EL and EC not available with DCT in 4 sections. Separate feed required. EXAMPLE: Qty Fixture 2 LFM2 1 54T5HO 40FT R GEB 2SE EL SCT LP 835 F1/24 C005 1 LFM2 2 54T5HO 32FT R8 120 GDIM DCT LP830 F1/12 C200 GLR 1SE- 1 section 2SE- 2 sections XSE- X sections EL- Emergency Battery Pack EC- Emergency Circuit SCT- Single Circuit DCT- Dual Circuit L/LP- No lamp LP K lamps LP K lamps LP K lamps F1- T-bar Ceiling F2- Hard Ceiling Horizontal J-box ACG- Adjustable Cable Grippers GLR- Fast Blow Fuse GMF- Slow Blow Fuse C100- Satin Anodized Finish C200- Peerless Standard White (Low Gloss) C005- Soft White (Low Gloss) C032- White White (Gloss) C041- White White (Low Gloss) CXXX- Custom Color (consult factory) 12-12" overall suspension 15-15" overall suspension 18-18" overall suspension 21-21" overall suspension 24-24" overall suspension XX- XX" overall suspension All rights reserved. Peerless and Lightfin are registered trademarks of. D-21
8 LIGHTFIN DIMINUTIVE INDIRECT/OPEN Pendant Mount Modular T5 HIGH-OUTPUT 6 X 2 Angular PHOTOMETRICS 2-LAMP T5 HIGH-OUTPUT 3-LAMP T5 HIGH-OUTPUT % % % Maximum Flux Location Luminaire Efficiency 84% 2-LAMP % % Luminaire Efficiency 80% 3-LAMP % % % Luminaire Efficiency 82% D All rights reserved. Peerless and Lightfin are registered trademarks of.
9 LIGHTDUCT DIMINUTIVE INDIRECT 7 X 2 Rounded Wall Mount SPECS/PHOTOMETRICS CATALOG NO. LDD Housing AA 6063 T6 extruded aluminum up to 24' in one uninterrupted section forming a 7"x 2 1 /16" rounded channel. Die-cast end plate mechanically attached with no exposed fasteners. Die-formed, baked white reflectors (85% nominal reflectance), including micro-prismatic, 100% virgin acrylic specular/diffusing optical lens. Specify 120 volt or 277 volt. Pre-wired with prescribed circuits as specified. UL and IBEW labels. For special circuiting, consult factory. 3500K T5 high-output lamps are included. FACTORY MODIFICATIONS Factory options by specification. Length (to 24' in one piece - longer with internal joiners), any finish (colors painted as selected). PHOTOMETRIC REPORT % % Luminaire Efficiency 70% All rights reserved. Peerless is a registered trademark and Lightduct is a trademark of. D-15
10 LIGHTFIN DIMINUTIVE INDIRECT Wall Mount 7 X 2 Angular SPECS/PHOTOMETRICS CATALOG NO. LFD Housing AA 6063 T6 extruded aluminum up to 24' in one uninterrupted section forming a 7"x 2 1 /16" angular channel. Die-cast end plate mechanically attached with no exposed fasteners. Die-formed, baked white reflectors (85% nominal reflectance), including micro-prismatic, 100% virgin acrylic specular/diffusing optical lens. Specify 120 volt or 277 volt. Pre-wired with prescribed circuits as specified. UL listed. Listed and labeled to comply with Canadian standards. For special circuiting, consult factory. 3500K T5 high-output lamps are included. FACTORY MODIFICATIONS Factory options by specification. Length (to 24' in one piece - longer with internal joiners), any finish (colors painted as selected). PHOTOMETRIC REPORT % % Luminaire Efficiency 70% All rights reserved. Peerless and Lightfin are registered trademarks of. D-33
Bruno BRM4-1 BRM4-2 BRM4-3. parabolic baffle. Each available with optional acrylic opal overlay.
Indirect / Direct T8 SPECIFICATIONS Pendant Mount Modular / 8 X 2 Rectangular CATALOG NUMBER FT Examples: 2 32 SPR 40FT R8 277 GEB0 DCT LP835 F/8 SCEP 3 32 SPR 32FT R8 277 GEB0 SE EL DCT LP835 F/2 AVAILABLE
More information2 Photocell option available in endcap, tenon or corner assembly. 81.8% Efficiency. Nominal Row Length R4 R8 R12. X FT Must be in 4 increments
SPECIFICATIONS Construction Die-formed, pre-painted steel housing. Extruded aluminum fillers. Die-cast aluminum end caps. Highly specular aluminum end plates. Shielding GrateOptic curved, crenulated diffuser
More informationBruno. dimensions / lamping. specifications. Die-formed cold-rolled steel housing. Die-cast aluminum flat or sculptured end cap.
Bruno Responding to a present-day penchant for classic rectilinear forms, Peerless Bruno moves front and center with its pure, low-profile shape and superlative indirect optics. Unique downlight design
More informationnar o (năr ō) adj. small or slender in width, especially compared with length <linear fluorescent lamp, golf club, fettuccine, kate moss>
nar o (năr ō) adj. small or slender in width, especially compared with length don t worry, our design skills far exceed our spelling aptitude.
More informationdimensions / lamping performance Voltage Ballast Type # of Emergency Modules GEB <20% THD Electronic (T8 only) GEB10 <10% THD Electronic Ballast
Lightline In the universe of high-performance linear lighting, nothing is as minimally dimensioned as Lightline. With a family of indirect, direct and recessed luminaires designed to fit any space, feel
More informationBRUNO BRUNO. Keep a Low Profile with No-Nonsense Minimalism.
BRUNO BRUNO Keep a Low Profile with No-Nonsense Minimalism. Inspired by minimalist master Mies van der Rohe, the Bruno family celebrates the spirit of less-is-more modernism. Designed to achieve a no funny
More informationCiros P-ID-5200 Pendant-Mounted Indirect/Direct
Type: Project: Ciros P-ID-5200 Pendant-Mounted Indirect/Direct 2 5/8" (67) 2 5/8" (67) Specifications 10 1/2" (267) 10 1/2" (267) U.S. Patent No. D431,086 HOUSING. Two-sided housing, 6063 T6 extruded aluminum.
More informationSeem mm 4.50" 4.00" 101.6mm. Narrow 4" linear fluorescent allows for both individual or continuous runs.
FLUORESCENT recessed companion wall mount companion DIMENSIONAL DATA FEATURES Narrow 4" linear fluorescent allows for both individual or continuous runs. Frosted acrylic flush lens provides even illumination,
More informationVerve IV. Suspended linear direct/indirect fluorescent with radial or flat baffle or parabolic louver.
FLUORESCENT BAFFLE/LOUVER radial blade baffle flat blade baffle flat blade parabolic louver DIMENSIONAL DATA FEATURES Suspended linear direct/indirect fluorescent with radial or flat baffle or parabolic
More informationCatalog No. SHIELDING
I T E C T U R A L A R C H S E N S O R S PROJECT INFORMATION Project Name Catalog No. Type Date FEATURES Crisp shape with clean, elegant lines Direct/Indirect lighting elements Up to 3T8, T5 or T5HO lamps
More informationFixture Type: Project Name: Baffle or Diffuser. Lamp Type. BW FP PARSS (1-lamp D only) PBSS XA 6044 (ADW only) see Baffle and Diffusers Options
W-D-66N 1" (25) 6 1/2" (165) Fixture Type: Project Name: Mod 66 W-D-66N, W-ID-66N, W-ADW-66N (chalkboard) Wall-Mounted Product Description Linear modular luminaire which offers a variety of distributions
More informationSeem 6. Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic.
Seem 6 FLUORESCENT GRID parabolic louver DIMENSIONAL DATA grid 5.53" 14.6mm FEATURES Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted
More informationBionic Perimeter Standard C o v e & P e r i m e t e r
Type Job Name Catalog Number Bionic Perimeter Standard C o v e & P e r i m e t e r 5 7 /16" 110mm 6 7 /16" 170mm 8 7 /16" 221mm Flush Regress 3" Regress ordering - BIO-PSTD (STANDARD) series/ style lamp
More informationHP90 Recessed 2'X2' Fluorescent; T8, T5, T5HO or TT5
Page 1 of 5 Emergency Pack 1 5" (127mm) 24" (610mm) 2-1/2" (64mm) 2" X 2-1/2" Wiring access plate with (2) 7/8" dia. K.O.'s Ordering Information HP90 H9 Direct/Indirect Recessed Fluorescent Body Style
More informationseem 4 grid features dimensional data performance
grid seem features Narrow " aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted acrylic flush lens provides even illumination, high performance
More informationSpecular louver Semispecular. PRF Perforated Top Cover SLD Solid Top Cover. louver. FUS GLR fuse for each ballast
Photometric Drawing for (1) 28W T5 Lamp CATALOG NUMBER FIXTURE OVERALL ROW LENGTH MAX SECTION LENGTH SHIELDING TOP COVER LAMPING (SEE CROSS SECTION) VOLTAGE OPTIONS* ET1S Enthuse Surface-mount # # must
More informationLighting Systems Argus-7
Page 1 of 5 1 1. (3.5cm) 1.7 (4.3cm) 4 5 Rectilinear 3 1.81 (4.6cm) Extruded Linear Louver.5 (.64cm) 5. (1.7cm) 9. (.86cm) 1 1. (3.5cm) 1.7 (4.3cm) 4 5 Tapered 3 1.81 (4.6cm).75 (.7cm) Feature Specifications
More informationRecessed. HP90 Fluorescent 1x4
Recessed HP90 Fluorescent 1x4 Project: Location: Cat.No: Type: Lamps: Notes: Qty: The Philips Day-Brite / Philips CFI HP90 Recessed Fluorescent combines a recessed contoured body with an enclosed linear
More information44-R-WWD. MOD 44 Recessed Wall Wash Direct. Ordering Guide. Key Features 44-R-WWD. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Wall Wash Ceiling Type DW Drywall PT Drywall with Plaster Trim LG 15/16 Grid Fixture distribution WWD Wall Wash
More informationCradle to Cradle Silver Certified Fixtures Available for Shipment in 5 Days
Arcos ID Arcos Perf II Cradle to Cradle Silver Certified ixtures Available for Shipment in 5 Days SAE P-ID-900 SAE P-I-9P SAE P-ID-9700 ixture : 2 3/" (60) 9 9/16" (23mm) Arcos Perf II -I-5900 Die-formed
More informationsolana semi-indirect indirect Low profile pendant with adjustable optics
semi-indirect indirect pendant Low profile pendant with adjustable optics Indirect lighting reduces glare and harsh shadows creating a comfortable environment and improving human performance. Lam Lighting
More informationseem 4 suspended led features dimensional data mounting information performance Narrow extruded aluminum 4 linear direct LED.
suspended led features Narrow extruded aluminum 4 linear direct LED. Individual units and continuous runs in 1 increments. Continuous frosted acrylic lens provides uninterrupted illumination, without pixels
More informationRecessed. HP90 Fluorescent 2x4
Recessed HP90 Fluorescent 2x4 Project: Location: Cat.No: Type: Lamps: Notes: Qty: The Philips Day-Brite / Philips CFI HP90 Recessed Fluorescent combines a recessed contoured body with an enclosed linear
More informationVERSYS Architectural Recessed T5 Fluorescent
TM VERSYS Architectural Recessed T5 Fluorescent VERSYS A revolutionary versatile system that seamlessly integrates vital building systems, high efficiency lighting and visual comfort into one exquisite
More informationEX3. Project Name _ K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EDGE EX3 Project Name Date Type SUSPENDED DIRECT LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationRPX. Specular louver Semispecular RSX. louver. FUS GLR fuse for each ballast IDS
Photometric Drawing for (1) 28W T5 Lamp CATALOG NUMBER FIXTURE OVERALL ROW LENGTH MAX SECTION LENGTH SHIELDING LAMPING (SEE CROSS SECTION) VOLTAGE OPTIONS* EF1P Enform 1 Pendant # # must be specified in
More informationNotes: Indirect. 5 1/2" 140mm. 5 1/32 128mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct / Indirect Direct Indirect 5 1/2" 14mm 5 1/2" 14mm 5 1/2" 14mm SHOWN WITH LENS OPTION 5 1/32 128mm ORDERING CODE 5 1/32 128mm 5
More informationEX3B. Project Name _ K 4000K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EX3B Project Name Date Type SUSPENDED BIDIRECTIONAL LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationRECESSED WALL WASH MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 13/32 4 3/8" 4" IC culus Listed Type I.C. SHOWN WITH LENS OPTION ORDERING CODE 2 15/16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PRODUCT SPECIFICATIONS
More informationAppendix A Supporting Material for Lighting Depth
Appendix A Supporting Material for Lighting Depth Appendix A-1 Light Loss Factor Calculations Fixtures P1, P1E Nonrecoverable Luminaire ambient temperature 1 Voltage to luminaire 1 Ballast factor 1 Luminaire
More information98PF-P-I Perforated Pendant Indirect. Ordering Guide. Key Features 98-P-I-PF. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 98 9800 Housing Style PF Perforated Mounting P Pendant Fixture distribution I Indirect Row length (in feet) Enter in foot
More information2 Peerless / Vellum Family. Modern Family
2 Peerless / Vellum Family Modern Family Expanding Vellum Peerless is redefining what luminaire families can now be with the advancement of LED technology. No longer held to the design constraints shaped
More informationFluorescent Lamp Wattages. Fluorescent Optics T5 = F14 (2') F21 (3',6') F28 (4',8') NB Narrow Beam (60 ) WB Wide Beam (100 )
INDOOR R FLUORESCENT INDOOR R FLUORESCENT SMS/SMM MOUNT Prefix Mounting Optics Light Source & Wattage LIN = Linea SMS-U Surface, Uplight, SMM-U Surface, Uplight, Multiple Fixture Run SMS-D Surface, Downlight,
More informationWALL MOUNT. Notes: Project: Type: PROJECT INFORMATION DIMENSIONS SECTION VIEWS ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 1/16" 78mm 4 102mm 4 102mm 4 3/8 111mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
More informationWall/Slot -II 85N Recessed Perimeter
Type: Project: Wall/Slot -II 85N Recessed Perimeter Specifications 10 1/2 (267 ± 19) 9" (229) baffle shown in flush F/position 3 5/8" (92) FIXTURE SUPPORT RAIL. Extruded white aluminum, wall-mounted rail
More informationSDx Pendant Semi-Direct
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 18 SDx Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
More informationPRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW
Project Type Notes END VIEW 3 7/16" 87mm 3 15/16" 1mm ORDERING GUIDE CONTROL SENSORS S PRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW AIR Wall S satin lens 3 3 T5 T5 1 1 lamp AP
More information131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x 48.0L x 4.0Dp (300 x 1220 x 100) LAMP 1 or 2 lamp
More informationPhotometric Drawing for (1) T5L-1T528 VOLTAGE MOUNT OPTIONS v v
Photometric Drawing for (1) T5L-1T528 CATALOG NUMBER FIXTURE ING (SEE CROSS SECTION) VOLTAGE MOUNT OPTIONS T5L Tool T5 (no shielding) 1T528 1T521 1T514 1x28w T5 1x21w T5 1x14w T5 120 120 v 277 277 v PEN
More informationAvenue A. Grid Mount (Open Shown) Drywall Flange (Open Shown) louver lens mr16
FLUORESCENT MR16 open optic cut-off louver clear lens flush mount mr16 (35 adjustment) extended yoke mr16 ( adjustment) snoot hex louver linear prismatic sand blasted soft focus DIMENSIONAL DATA Grid Mount
More informationHSN, HSM, HIS, IC, TN, CC and IW Series
Miro 4 Enhanced Aluminum Reflector HSN, HSM, HIS, IC, TN, CC and IW Series Holophane offers a variety of industrial luminaires for a wide range of applications from the most demanding specialized industrial
More informationNotes: 3 13/32. (5) Please consult factory (6) Available with T8 lamp only
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct Indirect 3 13/32 ORDERING CODE 3 13/32 SHOWN WITH LENS OPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT
More informationWALL MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW 9" 229mm 3 3/4" 95mm 4 3/4 121mm 7 1/8 181mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 CENTER OPTICS
More information003 3 foot foot RUN Nominal Length* * For actual lengths see
M125 Project: Type: Qty: Series Lamping Shielding Mounting Nominal Length Finish Voltage Options Series Lamping Shielding Mounting Nominal Length Finish Voltage Options M125 (M125/9 Direct) Multi-Mount
More informationFINA F48B 48 Direct and Uplight Architectural Round
Project Name Date Type FINA F48B 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish
More informationFINA F36B 36 Bidirectional Architectural Round
Project Name Date Type FINA F36B 36 Bidirectional 4-1/2 4-7/8 (114.3mm) (123.8mm) 33-15/16 (862mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with 1/4 trim Aluminum
More information131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 131 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x.0l x 4.0Dp (0 x 1220 x 100) LAMP 1 or 2 lamp
More informationNotes: (1) not recommended with staggered lamping (2) Not available with T8 lamping.
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEW 3 5/8" 92mm 2 1/4 57mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH (FT)
More informationRECESSED ASYMMETRIC MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 5" SHOWN WITH LENS OPTION 3 13/32 ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3
More informationSeem 4. Narrow extruded aluminum 4" linear direct/indirect LED with Pop-lens options.
LED DIRECT/INDIRECT flush lens top & bottom pop-up lens & pop-down lens pop-up lens & flush lens bottom end detail single point corner suspension linear direct only companion wall to ceiling corner companion
More informationREGOLO 1. RP11 Direct
DATE: PROJECT: CATALOG #: TYPE: QTY: REGOLO 1 RP11 Direct Pendant / Flush Lens Remote Driver 1 1 /2 (40 mm) 1 5 /8 (42 mm) Micro-scale functional pendant luminaire that provides unlimited lighting possibilities
More informationFINA F48 48 Direct and Uplight Architectural Round
Project Name Date Type 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with
More informationEDGE EX6WET 6 Suspended Direct Linear WET
Project Name Date Type 4-11/16 (119mm) EDGE EX6WET 6 Suspended Direct Linear WET 5-3/4 (146mm) 5/16 (8mm) Key Features Approved for wet location unless otherwise noted. IP65 and IK10 rated Fixture is built
More information44-P-SD. MOD 44 Pendant Semi-Direct. Ordering Guide. Key Features 44-P-SD. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
More informationAXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M
PROJECT: TYPE: NOTES: DESCRIPTION Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. Softly curved, Axle measures just 2 11/16" by 3 11/16". With
More informationlight FULL BLEED APPLICATION SHOT RENDERING
A6 FULL BLEED APPLICATION SHOT RENDERING A6 ANATOMY POWERFUL PERFORMANCE High performance Nichia 80+ CRI LEDs provide an optimal source for tailored ing design. 4.44 3.44 FLEXIBLE SUSPENSION The variety
More informationNotes: 2 13/16" 71mm. +GTD(#) generator transfer device (3)
1.8.263.AXIS PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW Round Wedge 3" 76mm 2 13/16" 71mm 3 7/8" 98mm 3 11/16" 94mm ORDERING CODE 1 2 3 4 5 6 7 8 9 1 11 12 13 PRODUCT SPECIFICATIONS
More informationVIA 4 LED PENDANT DIRECT/INDIRECT W W W. L U M E N W E R X. C O M
ORDER GUIDE Shown with HLO optics DESCRIPTION PROJECT: Via 4 is the flexible linear LED luminaire system for pendant, surface and recessed or in-wall installation, TYPE: whether as discrete luminaires,
More informationavenue features dimensional data performance Narrow 3" slot T5 fluorescent with opaque satin lens.
features Narrow 3" slot T5 fluorescent with opaque satin lens. Shielding options include corrugated, solid regressed trim, concave louver as well as flush lens. Drywall installation is availale, which
More informationSURFACE MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS
1.8.263.AXIS PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW 3 15/16" 1mm 3 7/16" 87mm ORDERING CODE 1 2 3 4 5 6 7 8 9 1 11 12 13 14 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
More information72-P-SD. MOD 72 Pendant Semi-Direct. Ordering Guide. Key Features 72-P-SD. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 72 MOD Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
More informationEDGE EX3B-WW 3 Suspended Bidirectional Linear Wall Wash
Project Name Date Type 5-3/8 (136.5mm) EDGE EX3B-WW 3 7/16 (11.1m) 3-1/2 (88.9mm) 11/16 (17.5m) Key Features 6063-T5 Extruded aluminum housing Extruded aluminum module with miro reflector for perfect wall
More informationEvolution Outline RECESSED LINEAR PERIMETER OUTLINE SLOT SYSTEM
Evolution Outline Project Name Date Type RECESSED LINEAR PERIMETER OUTLINE SLOT SYSTEM 4-1/2 (114.3mm) 5-1/4 (133.4mm) LED Product Partner Extruded aluminum trim with formed cold rolled 20 gauge steel
More informationAXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M PROJECT: TYPE: NOTES: DESCRIPTION Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution.
More informationEDGE EX3I 3 Suspended Indirect Linear
Project Name Date Type 5-/2 (40mm) EDGE EX3I 3 3-/2 (88.4mm) Key Features 6063-T6 Extruded aluminum housing Highly reflective = white painted reflector Room side maintance for LED system 5-year limited
More informationApollo 8. lamping. patient bed pair example. 8" wide recessed patient bed light with exam function available in 2', 3' & 4' lengths.
FLUORESCENT RECESSED PATIENT BED LIGHT SYSTEM apollo 8 ambient only integral LED apollo 1 & 2 companion DIMENSIONAL DATA FEATURES 8" wide recessed patient bed light with exam function available in 2',
More informationLINA DESCRIPTION TYPE MATERIAL LIGHT SOURCE POWER SUPPLY
The family features luminaires with covered linear fluorescent lamps or LED sources. The family contains Tunable White luminaires. The may be connected to long lines of any length or shape. Thanks to luminous
More informationarchitectural ambient indoor
architectural ambient indoor brand profile Founded in 2000 in Spokane, WA Serves the indoor commercial, educational, retail, health care, and institutional marketplaces Exceptional array of architectural
More information44-P-D. MOD 44 Direct Pendant. Ordering Guide. Key Features 44-P-D. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Mounting P Pendant Fixture distribution D Direct Row length (in feet) Enter in foot increments. Note fixture lengths
More informationNotes: 3 1/2" 89mm. 1/2" 13mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 1/2" 13mm 3 1/2" 89mm 12 35mm ORDERING CODE 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LIGHT DISTRIBUTION
More informationEDGE ET6 6 Recessed Linear EDGE Techx for Integrated Ceiling Systems
Project Name Date Type 5-3/4 (146.1mm) EDGE ET6 6 EDGE Techx for Integrated Ceiling Systems 5 (127mm) 5-13/16 (147.6mm) Key Features Extruded aluminum trim with formed cold rolled 20 gauge steel back box
More informationLinear recessed and surface lighting
Linear recessed and surface lighting Linear recessed and surface lighting B Philips Lightolier For complete specification information visit www.lightolier.com Linear recessed and surface lighting Section
More informationFULL BLEED APPLICATION SHOT RENDERING
KM FULL BLEED APPLICATION SHOT RENDERING K1 M1 KM ANATOMY POWERFUL PERFORMANCE K1 1.50 High performance Nichia 80+ CRI LEDs provide an optimal source for tailored ing design. 0.75 optional aperture 7.00
More informationCommercial & Industrial Fluorescent Wall and Undercabinet Mount
Commercial & Industrial Fluorescent Wall and Undercabinet Mount Family FileName Description RevisionDate Undercabinet 2UC 2UC Wrap-front lens, 1-13/16'' profile, T8 or T12 lamps 01/01/1996 N2S N2S Finesse
More informationEDGE EX33 3 x 3 Suspended Direct Linear
Project Name Date Type 3-1/4 (82.6mm) 3 x 3 Suspended Direct Linear 2-1/4 (57.2mm) 2-7/8 (73mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring
More informationEDGE EV3WET 3 Recessed Linear WET
Project Name Date Type 4-13/16 (122mm) EDGE EV3WET 3 3-11/16 (94mm) 4-3/4 (121mm) 5/16 (8mm) Key Features Approved for wet location unless otherwise noted. IP65 and IK10 rated Fixture is built using corrosion
More informationEDGE EX44 4 x 4 Suspended Direct Linear
Project Name Date Type 4 (101.6mm) EDGE EX44 4 x 4 Suspended Direct Linear 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationProject Name. 23-5/8 (600.2mm)
LiFT 2x2 Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 23-5/8 (600.2mm) 23-5/8 (600.2mm) 5-5/8 (143mm) Formed 20 gauge cold rolled steel housing Highly reflective die-formed white painted reflector
More informationCLARA CLA SUSPENDED, WALL, SURFACE
CLARA CLA STANDARD SIZES 4.75" Hollow Lensed Body Configurable in 2ft increments (suspended mount) ADA-Compliant 2ft/4ft wall sconce LAMPING LED - 80+ CRI - 3000K/3500K/4000K Dimming down to 0% FINISH
More informationHW, WA, WRSN and WRSM Series
Miro 4 Enhanced Aluminum Reflector HW, WA, WRSN and WRSM Series A choice of proven Holophane wraps provide a clean, linear appearance of light with control, comfort and architectural richness. The highly
More informationCapable and versatile, the specification-grade LUMINATA II is an elegant lighting solution.
Capable and versatile, the specification-grade LUMINATA II is an elegant lighting solution. Sculpted end Extended end Conveying a strong sense of performance and aesthetic appeal, the suspended LUMINATA
More informationNotes: 2 3/8" 60mm. (1) One lamp with satin lens only (2) Not available for T8 Add 9 per lamp. Specify quantity Requires 120V or 277V
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 2 3/8" 60mm ORDERING CODE 9 3/4 248mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
More informationPROJECT INFORMATION. Catalog No.
PROJECT INFORMATION Project Name Type Catalog No. Date FEATURES Quick and simple aircraft cable hanging system or pendant mount bracket available Long-life,,000 hour s at L80 reduce life cycle maintenance
More informationProject. Type. Notes PRODUCT ID NOM.LUMENS/FT CRI COLOUR TEMP. SHIELDING LENGTH/FT FINISH VOLTAGE
Project Type Notes 3 7/8" 98mm 4 11/16" 119mm PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 5 lm/ft 4.54 W/ft 11 lm/w 6 lm/ft 5.48 W/ft 111 lm/w 8 lm/ft 7.2 W/ft 11 lm/w
More informationDual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire
Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire For additional configurations see our Product Catalog or visit our website at WINDIRECT TM 3 in1 Dual Lamp Ceramic Metal Halide CMH x 2 1
More informationREVO LED PENDANT DIRECT/INDIRECT W W W. L U M E N W E R X. C O M
DESCRIPTION PROJECT: The Revo pendant offers a fresh interpretation of a classic shape, both attractive and functional. Just 2 3/8" TYPE: in diameter, Revo delivers precise and well shielded illumination
More informationEDGE EX1B 1 Suspended Bidirectional Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended idirectional Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationAvenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm 4.3" 109.22mm
More informationCove. Navigator II. One of These Three is Just Right. A Means to Every End...
Cove Navigator II A Means to Every End... Cove One of These Three is Just Right. The Corelite Cove series of luminaires aim to be wholly complementary to any application. Corelight Cove series luminaires
More informationPTP Series PTPL-24-DI
DATE NOTES PTP Series PTPL-24-DI LED Luminaire PROJECT TYPE HOUSING: Die-formed, 20-gauge, cold rolled steel housing. Joiner ends are notched for continuous appearance in row-mounted applications. REFLECTOR:
More informationAvenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
Avenue A FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm
More informationD/I Extrusions. Versatility. Scalability. Capability.
D/I Extrusions D/I Extrusions Versatility. Scalability. Capability. Corelite s extensive lines of Direct/Indirect Extruded product families infallibly provide the simple solution to complex spaces. The
More informationPENDANT INDIRECT - WITH ACCENT OPTION 3 1/32. dia
Project Type Notes Linear option shown Kit option shown PERFORMANCE Semi-Recessed Extended Pivoted Semi-Recessed Extended Beam Spread 24º 36º 60º 1 3/4 1 3/4 CBCP 2287 cd 796 cd 446 cd 1/2 Ordering Guide
More informationNera. detail. fixture information. Unique aesthetic inspired by the visual void design philosophy. Luminaire sizes available in 2 x2, 3 x3 and 4 x4.
LED bottom detail inside lens detail white finish palladium finish 2016 DIMENSIONAL DATA FEATURES Unique aesthetic inspired by the visual void design philosophy. Luminaire sizes available in 2 x2, 3 x3
More informationVIA 2 PLUS RECESSED W W W. L U M E N W E R X. C O M
VIA 2 PLUS RECESSED W W W. L U M E N W E R X. C O M DESCRIPTION Via 2 PLUS combines the elegance of Via 2 with the added architectural element of a lens which protrudes ½" below the surface plane. Via
More informationDESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution.
DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. TYPE: Softly curved, Axle measures just NOTES: 2 11/16" by 3 11/16". With
More information44-R. MOD 44 Recessed. Ordering Guide. Key Features. Fixture Type: Project Name: Quick Find litecontrol.com 44-R
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Ceiling Type DW Drywall PT Drywall with Plaster Trim LG 15/16 Grid Fixture distribution D Direct Row length (in
More informationEDGE EX1 1 Suspended Direct Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended Direct Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationtwig SurroundLite TM WALL SEMI-INDIRECT Project Type Notes Ordering Guide PERFORMANCE PER LINEAR FOOT AT 3500K 1 / 7 axislighting.
Project Type Notes Shown with VL optic Shown with SO lens PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 2 9/16 9up/1down at 125 lm/ft 1125 lm/ft 125
More informationEDGE EX4B 4 Suspended Bidirectional Linear
Project Name Date Type 4-3/4 (120.7mm) EDGE EX4 4 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Room-Side Maintenance
More information