Cradle to Cradle Silver Certified Fixtures Available for Shipment in 5 Days
|
|
|
- Melvin Boyd
- 6 years ago
- Views:
Transcription
1 Arcos ID Arcos Perf II Cradle to Cradle Silver Certified ixtures Available for Shipment in 5 Days SAE P-ID-900 SAE P-I-9P SAE P-ID-9700
2 ixture : 2 3/" (60) 9 9/16" (23mm) Arcos Perf II -I-5900 Die-formed steel housing with perforated sections and white acrylic diffusing panels behind the perforations. Reflectors are high-reflectance specular aluminum center and side elements. UL Listed. Cradle to Cradle Certified. CM Product, lamping, & length BLS- P - I Length(ft) - LP/ELB inish Tandem 5Day I Indirect 59 X AI/ACC (field adjustable) 2, 3,, 6, 2,, 6 T T5 matte white) is LP/ELB is LP/E : count = total number of lamps in the fixture Tandem wiring not available for one-lamp cross-section fixtures. or ordering guide information in shaded areas, choose selection by reading ACROSS the shaded areas for correct specifications. -I-596LP/ELB-AI/ACC is a typical catalog number for a 5 DAY Quick-Ship 6-lamp (3 lamps in cross-section), -foot long, high-output T5 fixture with textured matte white finish, low-profile electronic ballast, tandem-wired, pre-wired with two-circuit branch wiring and quick-connects, shelf-style end caps, volts, mounted with field adjustable aircraft cables. 2 3/" (60) 2-T 3-T 2-T5 or 9 9/16" (23mm) 3-T5 or End Cap Shelf-Style. Die-cast shelf-style end caps with no exposed fasteners. use. Slow or fast blow, determined by Litecontrol. LP/E Low-profile Emergency luorescent. Battery-powered ballast from a UL Listed manufacturer will operate one lamp for 1 1/2 hours. Tandem & Circuiting ixture is wired with a single-circuit so that all lamps are switched - ixtures wired with two circuits. 2-lamp in cross section fixtures, separately. 3-lamp in cross section fixtures, the fixture is wired such that the in-line center lamps are switched separately from the in-line outer lamps.
3 2 3/" (60) ixture : Arcos ID -ID-5900 /Direct 9 9/16" (23mm) Product, ing & Length BLS- P - ID Day ID Indirect/ Direct 59 X AI/ACC (field adjustable) 2,, 6 Length (ft) T5 T Die-formed steel housing with high reflectance specular aluminum side reflectors and a downlight opening. UL Listed. Cradle to Cradle Certified. CM SGL - - LP/ELB Baffle or PBSS SGL Baffle or -ID-596-SGLLP/ELB-AI/ACC is a typical catalog number for a 5 DAY Quick-Ship 6-lamp (3-lamps in cross-section), -foot long, high-output T5 fixture with soft glow lens, textured matte white finish, low-profile electronic ballast, tandem-wired, two-circuit branch wiring with quick connects, shelf-style end caps, volts, mounted with field adjustable aircraft cables. inish matte white) is LP/ELB is Tandem LP/E : count = total number of lamps in the fixture Tandem wiring not available for one-lamp cross-section fixtures. or ordering guide information in shaded areas, choose selection by reading ACROSS the shaded areas for correct specifications 2-T5 or 2-3-T5 or 3-2-T 3-T End Cap Shelf-Style. Die-cast shelf-style end caps with no exposed fasteners. use. Slow or fast blow, determined by Litecontrol. LP/E Low-profile Emergency luorescent. Battery-powered ballast from a UL Listed manufacturer will operate one lamp for 1 1/2 hours. Baffle & PBSS Radiused Parabolic Semi-specular Baffle. 30 cells, producing 30 lengthwise shielding. SGL Soft Glow Lens. Extruded frosted acrylic, follows contour of fixture housing. Tandem & Circuiting ixture is wired with a single-circuit so that all lamps are switched - ixtures wired with two circuits. 2-lamp in cross section fixtures, separately. 3-lamp in cross section fixtures, the fixture is wired such that the in-line center lamps are switched separately from the in-line outer lamps.
4 3 1/" (0) 9 3/" (2mm) ixture : SAE Systems -ID-900 Graceful arcuate-shaped housing with an indirect-direct distribution. UL listed. Cradle to Cradle Certified. CM Product, ing, & Length - ID T5-5 Day ID Indirect/ Direct 9 Aircraft Cables X AI/ACC (field adjustable) 2,, 6 3, 6, 9 2,, 6 3, 6, 9 Length (ft) T T5 SGL - - LP/ELB Baffle or PBSS SGL Baffle and inish matte white) is LP/ELB is std Tandem LP/E : count = total number of lamps in the fixture Tandem wiring not available for one-lamp cross-section fixtures or ordering guide information in shaded areas, choose selection by reading ACROSS the shaded areas for correct specifications. -ID-96T5-SGLLP/ELB-AI/ACC is a typical catalog number for a 5 DAY Quick-Ship 6-lamp (3 lamps in cross-section), -foot long T5 fixture with soft glow lens, textured matte white finish, low-profile electronic ballast, tandem-wired, pre-wired with two-circuit branch wiring and quick-connects, fuse, volts, mounted with field adjustable aircraft cables. 2-T 3-T Baffle and PBSS Radiused Parabolic Semi-specular Baffle. 30 cells, producing 30 lengthwise shielding. SGL Soft Glow Lens. Extruded frosted acrylic, follows contour of fixture housing. 2-T5 or 3-T5 or End Cap Shelf-Style. Die-cast shelf-style end caps with no exposed fasteners. use. Slow or fast blow, determined by Litecontrol. LP/E Low-profile Emergency luorescent. Batterypowered ballast from a UL Listed manufacturer will operate one lamp for 1 1/2 hours. Tandem & Circuiting ixture is wired with a single-circuit so that all lamps are switched - ixtures wired with two circuits. 2-lamp in cross section fixtures, separately. 3-lamp in cross section fixtures, the fixture is wired such that the in-line center lamps are switched separately from the in-line outer lamps.
5 3 1/" (79) ixture : SAE Systems -I-9P 9 3/" (2mm) Graceful arcuate-shaped perforated housing for indirect lighting with a soft, glowing appearance. UL listed. Cradle to Cradle Certified. CM Product, lamping, & length - I - 9P 2 T - Length (ft) - ELB inish Tandem 5 Day LiteSPeed I Indirect 9P perforated X AI/ACC (field adjustable) 2, 3,, 6, 6, 9, T matte white) is ELB10 is E : count = the total number of lamps in fixture Tandem-wiring not available for one-lamp cross-section fixtures or ordering guide information in shaded areas, choose selection by reading ACROSS the shaded areas for correct specifications. -I-9P2TELB10-AI/ACC is a typical catalog number for a 5 DAY Quick-Ship 2-lamp (2 lamps in crosssection), -foot long T fixture with perforated housing, textured matte white finish, electronic ballast, tandem-wired, pre-wired with two-circuit branch wiring and quick-connects, fuse, volts, mounted with field adjustable aircraft cables. 2-T 3-T E Emergency luorescent. Battery-powered ballast from a UL Listed manufacturer will operate one T lamp for 1 1/2 hours. End Cap Shelf-Style. Die-cast shelf-style end caps with no exposed fasteners. use. Slow or fast blow, determined by Litecontrol. Tandem & Circuiting ixture is wired with a single-circuit so that all lamps are switched - ixtures wired with two circuits. 2-lamp in cross section fixtures, separately. 3-lamp in cross section fixtures, the fixture is wired such that the in-line center lamps are switched separately from the in-line outer lamps.
6 1/" (105) ixture : SAE Systems -ID /" (29mm) Indirect-direct fixture with curved baffles to match the housing shape. UL listed. Cradle to Cradle Certified. CM Product, ing, & Length BLS- P- ID T - Length (ft) BW - - ELB Baffle inish Tandem- ID Indirect/ Direct 97 X AI/ACC (field adjustable) 2, 3, 6 6, 9 T BW matte white) is ELB10 is E : count = total number of lamps in the fixture or ordering guide information in shaded areas, choose selection by reading ACROSS the shaded areas for correct specifications. -ID-976T-BWELB10-AI/ACC is a typical catalog number for a 5 DAY Quick-Ship 6-lamp (3 lamps in cross-section), -foot long T fixture with matte white blade baffle, textured matte white finish, electronic ballast, tandem-wired, pre-wired with twocircuit branch wiring and quick-connects, fuse, volts, mounted with field adjustable aircraft cables. E 2-T 3-T Emergency luorescent. Battery-powered ballast from a UL Listed manufacturer will operate one T lamp for 1 1/2 hours. use. Slow or fast blow, determined by Litecontrol. Baffle BW Blade Baffle, Matte White. One-piece, ' long, 20-gauge steel baffle. Radiused blades are 1" high, 2" OC, providing a 27 shielding angle. The 2" blade spacing is continuous and uninterrupted along length of rows of joined fixtures. Tandem & Circuiting ixture is wired with a single-circuit so that all lamps are switched - ixtures wired with two circuits. 2-lamp in cross section fixtures, separately. 3-lamp in cross section fixtures, the fixture is wired such that the in-line center lamps are switched separately from the in-line outer lamps.
7 Terms & Conditions Cradle to Cradle Certified CM is a certification mark of MBDC. Shipment within 5 business days from receipt of a released, cleared order (not including day of entry). Orders and s should be clearly labelled BLS 5 Day so we can recognize them and act quickly. BLS prefix required in front of catalog number to designate a 5 Day order. All guidelines from the program apply, including ballasts and parts. (ballast determined by Litecontrol). No dimming ballasts. No custom colors, White only. No substitutions. These fixtures are also included in the 10 Day program, along with several other types. Please continue to use the LS prefix for 10 Day orders. No changes or cancellations allowed once the order is released to production and the order acknowledgement is sent. Standard terms and conditions (marking, packaging and shipping methods) apply. Please call to confirm 5 Day availability on quantities over 50 fixtures. Please consult technical sheets to verify availability of lamping, length and options for each fixture. Complete technical sheets available at litecontrol.com.
Ciros P-ID-5200 Pendant-Mounted Indirect/Direct
Type: Project: Ciros P-ID-5200 Pendant-Mounted Indirect/Direct 2 5/8" (67) 2 5/8" (67) Specifications 10 1/2" (267) 10 1/2" (267) U.S. Patent No. D431,086 HOUSING. Two-sided housing, 6063 T6 extruded aluminum.
Fixture Type: Project Name: Baffle or Diffuser. Lamp Type. BW FP PARSS (1-lamp D only) PBSS XA 6044 (ADW only) see Baffle and Diffusers Options
W-D-66N 1" (25) 6 1/2" (165) Fixture Type: Project Name: Mod 66 W-D-66N, W-ID-66N, W-ADW-66N (chalkboard) Wall-Mounted Product Description Linear modular luminaire which offers a variety of distributions
Wall/Slot -II 85N Recessed Perimeter
Type: Project: Wall/Slot -II 85N Recessed Perimeter Specifications 10 1/2 (267 ± 19) 9" (229) baffle shown in flush F/position 3 5/8" (92) FIXTURE SUPPORT RAIL. Extruded white aluminum, wall-mounted rail
44-R. MOD 44 Recessed. Ordering Guide. Key Features. Fixture Type: Project Name: Quick Find litecontrol.com 44-R
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Ceiling Type DW Drywall PT Drywall with Plaster Trim LG 15/16 Grid Fixture distribution D Direct Row length (in
SDx Pendant Semi-Direct
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 18 SDx Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
44-P-D. MOD 44 Direct Pendant. Ordering Guide. Key Features 44-P-D. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Mounting P Pendant Fixture distribution D Direct Row length (in feet) Enter in foot increments. Note fixture lengths
72-P-SD. MOD 72 Pendant Semi-Direct. Ordering Guide. Key Features 72-P-SD. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 72 MOD Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
44-P-SD. MOD 44 Pendant Semi-Direct. Ordering Guide. Key Features 44-P-SD. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
44-R-WWD. MOD 44 Recessed Wall Wash Direct. Ordering Guide. Key Features 44-R-WWD. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Wall Wash Ceiling Type DW Drywall PT Drywall with Plaster Trim LG 15/16 Grid Fixture distribution WWD Wall Wash
34-W. V3 Adjustable Wall Valence. Ordering Guide. Key Features. Fixture Type: Project Name: Quick Find litecontrol.com 34-W
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 34 V3 Mounting W Wall Mounted Fixture distribution AI Asymmetric Indirect AID Asymmetric Indirect/Direct ASD Asymmetric
Bruno BRM4-1 BRM4-2 BRM4-3. parabolic baffle. Each available with optional acrylic opal overlay.
Indirect / Direct T8 SPECIFICATIONS Pendant Mount Modular / 8 X 2 Rectangular CATALOG NUMBER FT Examples: 2 32 SPR 40FT R8 277 GEB0 DCT LP835 F/8 SCEP 3 32 SPR 32FT R8 277 GEB0 SE EL DCT LP835 F/2 AVAILABLE
LSLHFL. Litespeed LHF LED Recessed Troffer. Ordering Guide. Key Features LITESPEED. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series LHFL LHF LED Ceiling Type G 15/16 Grid Ceiling NG 9/16 Narrow Face Grid Ceiling SS 9/16 Screw Slot Grid Ceiling DW Drywall
Verve IV. Suspended linear direct/indirect fluorescent with radial or flat baffle or parabolic louver.
FLUORESCENT BAFFLE/LOUVER radial blade baffle flat blade baffle flat blade parabolic louver DIMENSIONAL DATA FEATURES Suspended linear direct/indirect fluorescent with radial or flat baffle or parabolic
Catalog No. SHIELDING
I T E C T U R A L A R C H S E N S O R S PROJECT INFORMATION Project Name Catalog No. Type Date FEATURES Crisp shape with clean, elegant lines Direct/Indirect lighting elements Up to 3T8, T5 or T5HO lamps
2 1 /8" 2 1 /8" Use guide below to order complete fixture runs from four feet to three-hundred feet in increments of four.
LIGHTDUCT DIMINUTIVE INDIRECT Pendant Mount - Modular AVAILABLE FIXTURES 6 X 2 Rounded LDM1-1 LDM1-2 LDM1-3 Housing AA 6063 T6 extruded aluminum forming a x rounded channel. Die-cast end plate attaches
Specular louver Semispecular. PRF Perforated Top Cover SLD Solid Top Cover. louver. FUS GLR fuse for each ballast
Photometric Drawing for (1) 28W T5 Lamp CATALOG NUMBER FIXTURE OVERALL ROW LENGTH MAX SECTION LENGTH SHIELDING TOP COVER LAMPING (SEE CROSS SECTION) VOLTAGE OPTIONS* ET1S Enthuse Surface-mount # # must
98PF-P-I Perforated Pendant Indirect. Ordering Guide. Key Features 98-P-I-PF. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 98 9800 Housing Style PF Perforated Mounting P Pendant Fixture distribution I Indirect Row length (in feet) Enter in foot
LS4L-P-D. Litespeed MOD 4 LED Pendant Direct. Ordering Guide. Performance LITESPEED LS4L-P-D. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 4L MOD Mounting P Pendant Fixture distribution D Direct Row length (in feet) Enter in foot increments. Note fixture lengths
WALL MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW 9" 229mm 3 3/4" 95mm 4 3/4 121mm 7 1/8 181mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 CENTER OPTICS
Litespeed MOD 3 LED Surface Direct
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 3L MOD Mounting S Surface Fixture distribution D Direct Row length (in feet) Enter in foot increments. Note fixture lengths
Seem 6. Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic.
Seem 6 FLUORESCENT GRID parabolic louver DIMENSIONAL DATA grid 5.53" 14.6mm FEATURES Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted
RPX. Specular louver Semispecular RSX. louver. FUS GLR fuse for each ballast IDS
Photometric Drawing for (1) 28W T5 Lamp CATALOG NUMBER FIXTURE OVERALL ROW LENGTH MAX SECTION LENGTH SHIELDING LAMPING (SEE CROSS SECTION) VOLTAGE OPTIONS* EF1P Enform 1 Pendant # # must be specified in
Notes: 2 3/8" 60mm. (1) One lamp with satin lens only (2) Not available for T8 Add 9 per lamp. Specify quantity Requires 120V or 277V
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 2 3/8" 60mm ORDERING CODE 9 3/4 248mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
Bruno. dimensions / lamping. specifications. Die-formed cold-rolled steel housing. Die-cast aluminum flat or sculptured end cap.
Bruno Responding to a present-day penchant for classic rectilinear forms, Peerless Bruno moves front and center with its pure, low-profile shape and superlative indirect optics. Unique downlight design
Notes: 3 1/2" 89mm. 1/2" 13mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 1/2" 13mm 3 1/2" 89mm 12 35mm ORDERING CODE 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LIGHT DISTRIBUTION
2 Photocell option available in endcap, tenon or corner assembly. 81.8% Efficiency. Nominal Row Length R4 R8 R12. X FT Must be in 4 increments
SPECIFICATIONS Construction Die-formed, pre-painted steel housing. Extruded aluminum fillers. Die-cast aluminum end caps. Highly specular aluminum end plates. Shielding GrateOptic curved, crenulated diffuser
Notes: Please specify
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS NARROW 2 1/8" 54mm 6 152mm WIDE 2 1/8" 54mm ORDERING CODE 8 3/4 222mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS (1)
Seem mm 4.50" 4.00" 101.6mm. Narrow 4" linear fluorescent allows for both individual or continuous runs.
FLUORESCENT recessed companion wall mount companion DIMENSIONAL DATA FEATURES Narrow 4" linear fluorescent allows for both individual or continuous runs. Frosted acrylic flush lens provides even illumination,
BRUNO BRUNO. Keep a Low Profile with No-Nonsense Minimalism.
BRUNO BRUNO Keep a Low Profile with No-Nonsense Minimalism. Inspired by minimalist master Mies van der Rohe, the Bruno family celebrates the spirit of less-is-more modernism. Designed to achieve a no funny
Capable and versatile, the specification-grade LUMINATA II is an elegant lighting solution.
Capable and versatile, the specification-grade LUMINATA II is an elegant lighting solution. Sculpted end Extended end Conveying a strong sense of performance and aesthetic appeal, the suspended LUMINATA
FINA F36B 36 Bidirectional Architectural Round
Project Name Date Type FINA F36B 36 Bidirectional 4-1/2 4-7/8 (114.3mm) (123.8mm) 33-15/16 (862mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with 1/4 trim Aluminum
FINA F48B 48 Direct and Uplight Architectural Round
Project Name Date Type FINA F48B 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish
seem 4 grid features dimensional data performance
grid seem features Narrow " aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted acrylic flush lens provides even illumination, high performance
EX3. Project Name _ K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EDGE EX3 Project Name Date Type SUSPENDED DIRECT LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
solana semi-indirect indirect Low profile pendant with adjustable optics
semi-indirect indirect pendant Low profile pendant with adjustable optics Indirect lighting reduces glare and harsh shadows creating a comfortable environment and improving human performance. Lam Lighting
FINA F48 48 Direct and Uplight Architectural Round
Project Name Date Type 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with
EX3B. Project Name _ K 4000K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EX3B Project Name Date Type SUSPENDED BIDIRECTIONAL LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
VERSYS Architectural Recessed T5 Fluorescent
TM VERSYS Architectural Recessed T5 Fluorescent VERSYS A revolutionary versatile system that seamlessly integrates vital building systems, high efficiency lighting and visual comfort into one exquisite
EDGE EX3B-WW 3 Suspended Bidirectional Linear Wall Wash
Project Name Date Type 5-3/8 (136.5mm) EDGE EX3B-WW 3 7/16 (11.1m) 3-1/2 (88.9mm) 11/16 (17.5m) Key Features 6063-T5 Extruded aluminum housing Extruded aluminum module with miro reflector for perfect wall
TECHNICAL SPECIFICATIONS
RFP Retrofit kit for parabolic troffers REFLECTOR: Precision formed aluminum in with white, specular or enhanced specular finish. 1, 2 or 3 lamp versions are available. Reflectors are designed for tool-less
EDGE EX6WET 6 Suspended Direct Linear WET
Project Name Date Type 4-11/16 (119mm) EDGE EX6WET 6 Suspended Direct Linear WET 5-3/4 (146mm) 5/16 (8mm) Key Features Approved for wet location unless otherwise noted. IP65 and IK10 rated Fixture is built
Notes: Indirect. 5 1/2" 140mm. 5 1/32 128mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct / Indirect Direct Indirect 5 1/2" 14mm 5 1/2" 14mm 5 1/2" 14mm SHOWN WITH LENS OPTION 5 1/32 128mm ORDERING CODE 5 1/32 128mm 5
EDGE EX3I 3 Suspended Indirect Linear
Project Name Date Type 5-/2 (40mm) EDGE EX3I 3 3-/2 (88.4mm) Key Features 6063-T6 Extruded aluminum housing Highly reflective = white painted reflector Room side maintance for LED system 5-year limited
dimensions / lamping performance Voltage Ballast Type # of Emergency Modules GEB <20% THD Electronic (T8 only) GEB10 <10% THD Electronic Ballast
Lightline In the universe of high-performance linear lighting, nothing is as minimally dimensioned as Lightline. With a family of indirect, direct and recessed luminaires designed to fit any space, feel
EDGE EV3WET 3 Recessed Linear WET
Project Name Date Type 4-13/16 (122mm) EDGE EV3WET 3 3-11/16 (94mm) 4-3/4 (121mm) 5/16 (8mm) Key Features Approved for wet location unless otherwise noted. IP65 and IK10 rated Fixture is built using corrosion
RECESSED WALL WASH MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 13/32 4 3/8" 4" IC culus Listed Type I.C. SHOWN WITH LENS OPTION ORDERING CODE 2 15/16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PRODUCT SPECIFICATIONS
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M
PROJECT: TYPE: NOTES: DESCRIPTION Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. Softly curved, Axle measures just 2 11/16" by 3 11/16". With
Length 04-4ft 2in 08-8ft 2in 12-12ft 2in. 9.0" [230mm] L INTERSECTION 8213MLLU_
![Length 04-4ft 2in 08-8ft 2in 12-12ft 2in. 9.0 [230mm] L INTERSECTION 8213MLLU_](/thumbs/96/129236067.jpg "Length 04-4ft 2in 08-8ft 2in 12-12ft 2in. 9.0 [230mm] L INTERSECTION 8213MLLU_")
Suspended 1T5 HO Direct/Indirect 8216H01 N or D High performance optical system designed to accommodate T5 HO or T8 lamps. Extruded aluminum construction available in a wide range of colors. Modular components
WALL MOUNT - DIRECT/INDIRECT 0.25" Glo Lens 0.25"
Project Type Louver Notes PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY SHIELDING I/D UPLIGHT DOWNLIGHT Flush Spotless Lens - down Glo Lens - up Glo Lens up and down 1100
MEDMASTER DOWNLIGHT Luminaires for Surgical Applications
PRODUCT FEATURES: 6" sealed, recessed downlight with regressed or flush lens trim Conducted emissions controlled as per MIL-STD-461F Delivered lumens: 794-5,543 lm 1% Dimming via 0-10V, DALI or EcoSystem
DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution.
DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. TYPE: Softly curved, Axle measures just NOTES: 2 11/16" by 3 11/16". With
WALL MOUNT. Notes: Project: Type: PROJECT INFORMATION DIMENSIONS SECTION VIEWS ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 1/16" 78mm 4 102mm 4 102mm 4 3/8 111mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
Bionic Perimeter Standard C o v e & P e r i m e t e r
Type Job Name Catalog Number Bionic Perimeter Standard C o v e & P e r i m e t e r 5 7 /16" 110mm 6 7 /16" 170mm 8 7 /16" 221mm Flush Regress 3" Regress ordering - BIO-PSTD (STANDARD) series/ style lamp
Notes: 3 13/32. (5) Please consult factory (6) Available with T8 lamp only
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct Indirect 3 13/32 ORDERING CODE 3 13/32 SHOWN WITH LENS OPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT
Nuvole. architectural
Nuvole HD architectural architectural Nuvole HD Wall Nuvole HD [nu-vo-lay]; clouds The translation of the Italian word nuvole is clouds. Nulite s interpretation of nuvole is a luminous instrument. The
EDGE EX1 1 Suspended Direct Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended Direct Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M PROJECT: TYPE: NOTES: DESCRIPTION Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution.
ORDERING INFORMATION: 120 Volts (120) 208 Volts (208) 240 Volts (240) 277 Volts (277) 480 Volts (480)
Del Mar Corrosion resistant, Weather Tight Unit fabricated from spun Aluminum.080 Thick, Full Gasket Keeps out insects and Water. Lens & Removable Door Assembly: Hinged Door Assembly Formed from One Piece
LINERO L_6A Suspended Linear
Project Name Date Type LINERO L_6 -/8 (28.6mm) -9/6 (39.7mm) -/8 (28.6mm) -3/6 (39.7mm) 6-9/6 (66.2mm) 6-7/8 (74.6mm) Key Features One piece die-formed 8 gauge steel housing Highly reflective die-formed
Evolution Outline RECESSED LINEAR PERIMETER OUTLINE SLOT SYSTEM
Evolution Outline Project Name Date Type RECESSED LINEAR PERIMETER OUTLINE SLOT SYSTEM 4-1/2 (114.3mm) 5-1/4 (133.4mm) LED Product Partner Extruded aluminum trim with formed cold rolled 20 gauge steel
seem 4 suspended led features dimensional data mounting information performance Narrow extruded aluminum 4 linear direct LED.
suspended led features Narrow extruded aluminum 4 linear direct LED. Individual units and continuous runs in 1 increments. Continuous frosted acrylic lens provides uninterrupted illumination, without pixels
EDGE EX2 2 Direct Suspended Linear
Project Name Date Type 4-3/4 (120.7mm) EDGE EX2 2 Direct 2-1/4 (57.2mm) 2-7/8 (73mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring access available
BSS610 GENERAL INFORMATION - FIXTURE HOUSING
BSS610 GENERAL INFORMATION - FIXTURE HOUSING 2 wide multi-axis direct LED luminaire system Project: Type: FEATURES Create an endless variety of multi-directional fixture runs and geometric shapes with
nar o (năr ō) adj. small or slender in width, especially compared with length <linear fluorescent lamp, golf club, fettuccine, kate moss>
nar o (năr ō) adj. small or slender in width, especially compared with length don t worry, our design skills far exceed our spelling aptitude.
BSS610 GENERAL INFORMATION - FIXTURE HOUSING
BSS610 GENERAL INFORMATION - FIXTURE HOUSING 2 wide multi-axis direct LED luminaire system Project: Type: FEATURES Create an endless variety of multi-directional fixture runs and geometric shapes with
PRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW
Project Type Notes END VIEW 3 7/16" 87mm 3 15/16" 1mm ORDERING GUIDE CONTROL SENSORS S PRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW AIR Wall S satin lens 3 3 T5 T5 1 1 lamp AP
Cynergy Series Retrofit Kit
project: fixture type: catalog #: quantity: The Cynergy Series LED Retrofit system has been developed to dramatically improve existing recessed troffer performance using Solid State Lighting (SSL) technologies.
EDGE EX1B 1 Suspended Bidirectional Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended idirectional Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
Avenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
Avenue A FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm
Avenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm 4.3" 109.22mm
Knife & Rail. LED Indirect/Direct Pendants. Contains Variable Intensity Technology
Knife & Rail LED Indirect/Direct Pendants Contains Variable Intensity Technology Variable Intensity Technology What It Is Litecontrol s Variable Intensity (Vi) technology module allows specification of
BLACK BODY DIMMING 800/1300 LUMEN 8 LED CYLINDER HYPERBOLIC / PARABOLIC / WALLWASH / OPEN APERTURE LC8 SERIES
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Black Body Dimming duplicates halogen dimming, offering a soft, natural, warm glow as light levels are reduced CCT warms from to 1K, while staying on the Black
Notes: (1) not recommended with staggered lamping (2) Not available with T8 lamping.
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEW 3 5/8" 92mm 2 1/4 57mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH (FT)
Seem 4. Narrow extruded aluminum 4" linear direct/indirect LED with Pop-lens options.
LED DIRECT/INDIRECT flush lens top & bottom pop-up lens & pop-down lens pop-up lens & flush lens bottom end detail single point corner suspension linear direct only companion wall to ceiling corner companion
COLOR/ FINISH VOLTAGE OPTIONS UNV ( ) YGW Gloss White (Standard) Y Premium Color CC Custom Color GLV Galvanized COLOR/ FIN- ISH
Type: Job: 11/4 23/8 23/8 23/8 STD 17/8 25/8 33/8 AR/ARP SR/ SRP 3 3 W W-SS 17/8 21/4 WA WG A narrow 2-lamp T8 strip light with an integral ballast. It is available with a choice of perforated or solid,
HP90 Recessed 2'X2' Fluorescent; T8, T5, T5HO or TT5
Page 1 of 5 Emergency Pack 1 5" (127mm) 24" (610mm) 2-1/2" (64mm) 2" X 2-1/2" Wiring access plate with (2) 7/8" dia. K.O.'s Ordering Information HP90 H9 Direct/Indirect Recessed Fluorescent Body Style
Fluorescent Luminaires
Fluorescent Luminaires 166 W W W. F I N E L I T E. C O M Series 12-ID Series 16 High Performance Recessed Edge Series 18 Series 15 Check out our complete line of products in the following pages... W W
D/I Extrusions. Versatility. Scalability. Capability.
D/I Extrusions D/I Extrusions Versatility. Scalability. Capability. Corelite s extensive lines of Direct/Indirect Extruded product families infallibly provide the simple solution to complex spaces. The
REVO LED PENDANT DIRECT/INDIRECT W W W. L U M E N W E R X. C O M
DESCRIPTION PROJECT: The Revo pendant offers a fresh interpretation of a classic shape, both attractive and functional. Just 2 3/8" TYPE: in diameter, Revo delivers precise and well shielded illumination
Recessed. HP90 Fluorescent 1x4
Recessed HP90 Fluorescent 1x4 Project: Location: Cat.No: Type: Lamps: Notes: Qty: The Philips Day-Brite / Philips CFI HP90 Recessed Fluorescent combines a recessed contoured body with an enclosed linear
131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 131 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x.0l x 4.0Dp (0 x 1220 x 100) LAMP 1 or 2 lamp
RECESSED ASYMMETRIC MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 5" SHOWN WITH LENS OPTION 3 13/32 ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3
131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x 48.0L x 4.0Dp (300 x 1220 x 100) LAMP 1 or 2 lamp
AXLE LED WALL ASYMMETRIC INDIRECT W W W. L U M E N W E R X. C O M
DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire TYPE: providing efficient asymmetric light NOTES: distribution. Softly curved, Axle measures just 2 11/16" by 3 11/16". With
4LPH-S-D. Ordering Guide. Key Features. Performance 4LPH-S-D. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 4LPH MOD PowerHUBB Mounting S Surface Fixture distribution D Direct AD Asymmetric Direct Row length (in feet) Enter in
ELEGANT ENHANCED ENERGY SOLUTION RECESSED ARCHITECTURAL
ELEGANT ENHANCED ENERGY SOLUTION RECESSED ARCHITECTURAL evolution Announcing the evolution of the classic Stratus recessed direct-indirect luminaire. Groundbreaking fixture efficiency and enhanced aesthetics
EDGE EX33 3 x 3 Suspended Direct Linear
Project Name Date Type 3-1/4 (82.6mm) 3 x 3 Suspended Direct Linear 2-1/4 (57.2mm) 2-7/8 (73mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring
Recessed. HP90 Fluorescent 2x4
Recessed HP90 Fluorescent 2x4 Project: Location: Cat.No: Type: Lamps: Notes: Qty: The Philips Day-Brite / Philips CFI HP90 Recessed Fluorescent combines a recessed contoured body with an enclosed linear
EDGE EX3 3 Suspended Direct Linear
Project Name Date Type 5-3/8 (36.5mm) EDGE EX3 3 Suspended Direct Linear 3-/2 (88.9mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring access
WALL MOUNT DIRECT/INDIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY LENS UPLIGHT DOWNLIGHT Flush lens shown Flush.5 2 FLUSH 75 lm/ft 5 lm/ft 11.9 W/ft 15 lm/w.5" 75 lm/ft 5
BLACK BODY DIMMING 800/1300/1500 LUMEN 6 LED NEW CONSTRUCTION/REMODEL
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Black Body Dimming duplicates halogen dimming, offering a soft, natural, warm glow as light levels are reduced CCT warms from 3000K to K, while staying on the
Linear recessed and surface lighting
Linear recessed and surface lighting Linear recessed and surface lighting B Philips Lightolier For complete specification information visit www.lightolier.com Linear recessed and surface lighting Section
Achieva Endeavor Thrive. Sales Manual. This information is for Ledalite sales representatives only. Not for public use.
Achieva Endeavor Thrive Sales Manual This information is for Ledalite sales representatives only. Not for public use. Table of Contents Introducing Achieva, Endeavor and Thrive... 5 Key Features... 5
EDGE EX4B 4 Suspended Bidirectional Linear
Project Name Date Type 4-3/4 (120.7mm) EDGE EX4 4 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Room-Side Maintenance
WALL MOUNT DIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY 3 lm/ft 3.25 W/ft* 93 lm/w 4 lm/ft 4.4 W/ft* 91 lm/w Flush.5 2 5 lm/ft 5.55 W/ft* 9 lm/w * Based on a 4 foot
SURFACE MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS
1.8.263.AXIS PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW 3 15/16" 1mm 3 7/16" 87mm ORDERING CODE 1 2 3 4 5 6 7 8 9 1 11 12 13 14 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
Avenue A. Grid Mount (Open Shown) Drywall Flange (Open Shown) louver lens mr16
FLUORESCENT MR16 open optic cut-off louver clear lens flush mount mr16 (35 adjustment) extended yoke mr16 ( adjustment) snoot hex louver linear prismatic sand blasted soft focus DIMENSIONAL DATA Grid Mount
avenue features dimensional data performance Narrow 3" slot T5 fluorescent with opaque satin lens.
features Narrow 3" slot T5 fluorescent with opaque satin lens. Shielding options include corrugated, solid regressed trim, concave louver as well as flush lens. Drywall installation is availale, which
5 YEAR CONTROL SENSORS
Project Type Louver Notes Flush Spotless Lens - down Glo Lens - up 3 7/8" SHIELDING INDIRECT Glo Lens up and down SurroundLite SurroundLite Asy. Glo Lens 0.25" PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL
EDGE EX44 4 x 4 Suspended Direct Linear
Project Name Date Type 4 (101.6mm) EDGE EX44 4 x 4 Suspended Direct Linear 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector