Fixture Type: Project Name: Baffle or Diffuser. Lamp Type. BW FP PARSS (1-lamp D only) PBSS XA 6044 (ADW only) see Baffle and Diffusers Options
|
|
|
- Emery McKenzie
- 6 years ago
- Views:
Transcription
1 W-D-66N 1" (25) 6 1/2" (165) Fixture Type: Project Name: Mod 66 W-D-66N, W-ID-66N, W-ADW-66N (chalkboard) Wall-Mounted Product Description Linear modular luminaire which offers a variety of distributions and shielding options. UL Listed. This fixture is Cradle to Cradle Silver Certified CM by MBDC. Ordering Guide Product, lamping, & length Options W - 66N T8 - Mounting Distribution Series Lamp Count Nominal Length(ft) Lamp Type Baffle or Diffuser Finish Ballast Tandem Wiring Other Options Volts W Wall-Mounted D Direct ID Indirect/Direct ADW * Asymmetric Direct 66N 1, 2 1, 2 1, 2 2, 4 2, 4 notes T8 BW FP PARSS (1-lamp D only) PBSS XA 6044 (ADW only) Baffle and Diffusers Options CWM (matte white) is standard website for other Product Finishes ELB10 is standard DA/MK7 DL/HL3D DO/HEL Ballast Options -- TW notes F EF WCB Other Options notes: Lamp count = total number of lamps in the fixture Tandem wiring not available for one-lamp cross-section fixtures *W-ADW-66N available in one-lamp cross-section only For ordering Guide information in shaded areas, choose selection by reading ACROSS the shaded areas for correct specifications. W-D-66N24T8-BW-CWM-ELB10-TW-F-120 is a typical catalog number for a 2-lamp (2 lamps in cross-section), 4-foot long T8 fixture with white blade baffle, matte white finish, electronic ballast, tandem-wired, fuse, 120 volts. W-ADW-66N14T CWM-ELB10-TW-WCB-F-120 is a typical catalog number for a 1-lamp (1-lamp in cross-section), 4-foot long T8 fixture with a 6044 lens, matte white finish, electronic ballast, tandem-wired chalkboard mounting brackets, fuse, 120 volts. Cross-section lamping W-D-66N W-ID-66N W-ADW-66N 1-T8 1-T8 PARSS 2-T8 1-T8 2-T8 1-T8 Baffle & Diffuser Options BW Blade white baffles with matte white finish. FP Flat plastic white acrylic lens, regressed. PARSS Parabolic semi-specular reflector baffle. For W-D-66N one-lamp cross-section only. PBSS Parabolic semi-specular baffle. 1.4" high x 2" OC. XA Extruded acrylic lens, with conical prisms, regressed Asymmetric lens to direct light towards wall. W-ADW-66N only. W-ID-66N 6 1/2" (165) W-ADW-66N Ballast Options Specify in place of ELB10, contact factory for availability/compatibility with lamping: DA/MK7 Advance Mark VII dimming ballast. DL/HL3D Lutron Hi-lume 3D dimming ballast DO/HEL Osram Sylvania dimming ballast. 1" (25) Other Options F Fuse. Slow or fast blow, determined by Litecontrol. EF Emergency Fluorescent Ballast. Battery-powered ballast from a UL Listed manufacturer will operate one lamp for 1 1/2 hours. WCB Wall bracket for chalkboard lighting. Only available with ADW distribution. Questions to Ask 1. Row information, including desired fixture lengths? 2. Diffuser type? 3. White finish or other? 4. Ballast options? 5. Controls solutions? 6. Other options? or 277 volt? revised 5/11/2012
2 Specifications HOUSING. Die-formed and welded steel, with 3/8" regression at housing bottom for rigidity and appearance, furnished with long, 20-gauge steel splines for precise alignment at each joint. End headers have clearance holes for easy row installation and are notched under lamps for more even diffuser luminance and continuous baffle appearance. W-ID-66N. Three-inch wide opening in housing top provides 36-50% uplight ceiling and wall illumination. End caps. Steel,14-gauge, with no holes or knockouts, finished to match housing. Four fasteners on each end cap allow tight attachment to ends of individual fixtures and ends of rows. REFLECTOR. W-D-66N. Standard: Die-formed steel with high-reflectance white finish. Parabolic Reflector/Baffle (PARSS): Die-formed semi-specular anodized aluminum reflector and baffle assembly. W-ID-66N. Die-formed steel with high-reflectance white finish. W-ADW-66N. Die-formed semi-specular aluminum (on lamp side) and die-formed steel with high-reflectance white finish. Lamping. Available in one- and two-lamp T8. BALLAST. Electronic Ballast (ELB10), high power factor, thermally protected Class P, Sound Rated A, less than 10% THD, manufactured by a UL Listed manufacturer, as available, determined by Litecontrol. Ballasts with a voltage range of 120 to 277 will be used when fixture configuration and ballast availability allow. The minimum number of ballasts will be used. TANDEM WIRING. When selected from Ordering Guide below, fixtures wired to switch in-line lamps separately, providing two levels of light (two-lamp crosssection fixtures only). BALLAST Disconnect. Fixture supplied with a ballast disconnect device to enable compliance with the NEC. SYSTEM CONNECTORS. Corners and straight extensions available. Die-formed steel. Bottom and exposed sides to be smooth with no exposed fasteners or knockouts. See Field Measurement Procedure for instructions. MOUNTING. Provided with two wall-mounting brackets measuring 4 1/2" square x 1" deep. Finish is matte white (CWM). W-ADW-66N. Provided with two wall-mounting brackets (WCB) measuring 4 1/2" x deep, finished to match housing. CERTIFICATION. Fixture and electrical components are UL and/or CUL Listed, and bear the I.B.E.W., A.F. of L. label. This fixture is Cradle to Cradle Certified CM Silver by MBDC. Note: Litecontrol reserves the right to change specifications without notice for product development and improvement. Planning for Installation (W-D-66N and W-ID-66N) For special system connectors needed to exactly fill a wall or follow a perimeter, field-measured dimensions may be required from the job site. Minimum SE length is 3.25". Please refer to Field Measurement Procedure for instructions. Wall brackets W-D-66N and W-ID-66N Individual fixtures 2011 LITECONTROL, TS f:
3 Planning for Installation Chalkboard (W-ADW-66N) Mounting bracket W-ADW-66N 4 1/2" 3" (114) (76) 2 3/4" (70) 4 1/2" (114) CL of outlet box 3 1/2" (89) Individual fixtures Photometric data Wall Asymmetric Direct 1-T W-ADW-66N14T % Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE Vertical illuminance chart Values calculated at center of 12-foot row mounted 7' above the floor. Room size: 8' x 12' x 9' high Reflectances: 80/70/20; 30% chalkboard Total Light Loss Factor:.72 Distance from Bottom of Luminaire 1' 1' 2' 2' 3' 3' RoomSurface Illuminanceon Wall T8 55 fc 43 fc 30 fc 22 fc 17 fc 15 fc 13 fc f:
4 Photometric data Wall Direct 1-T W-D-66N14T8-XA 58.2% Efficiency Litecontrol Certified Test Report # W-D-66N14T8-BW 54.0% Efficiency Litecontrol Certified Test Report # W-D-66N14T8-PBSS 50.9% Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE ZONE LAMP LUMINAIRE ZONE LAMP LUMINAIRE W-D-66N14T8-PARSS 48.3% Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE f:
5 Photometric data Wall Direct 2-T W-D-66N24T8-XA 51.1% Efficiency Litecontrol Certified Test Report # W-D-66N24T8-BW 47.2% Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE ZONE LAMP LUMINAIRE W-D-66N24T8-PBSS 43.4% Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE f:
6 Photometric data Wall Indirect/Direct 1-T W-ID-66N14T8-XA 69.4% Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE W-ID-66N14T8-BW 67.0% Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE W-ID-66N14T8-PBSS 63.5% Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE f:
7 Photometric data Wall Indirect/Direct 2-T W-ID-66N24T8-XA 67.2% Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE W-ID-66N24T8-BW 66.0% Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE W-ID-66N24T8-PBSS 64.0% Efficiency Litecontrol Certified Test Report # ZONE LAMP LUMINAIRE f:
Wall/Slot -II 85N Recessed Perimeter
Type: Project: Wall/Slot -II 85N Recessed Perimeter Specifications 10 1/2 (267 ± 19) 9" (229) baffle shown in flush F/position 3 5/8" (92) FIXTURE SUPPORT RAIL. Extruded white aluminum, wall-mounted rail
Ciros P-ID-5200 Pendant-Mounted Indirect/Direct
Type: Project: Ciros P-ID-5200 Pendant-Mounted Indirect/Direct 2 5/8" (67) 2 5/8" (67) Specifications 10 1/2" (267) 10 1/2" (267) U.S. Patent No. D431,086 HOUSING. Two-sided housing, 6063 T6 extruded aluminum.
Cradle to Cradle Silver Certified Fixtures Available for Shipment in 5 Days
Arcos ID Arcos Perf II Cradle to Cradle Silver Certified ixtures Available for Shipment in 5 Days SAE P-ID-900 SAE P-I-9P SAE P-ID-9700 ixture : 2 3/" (60) 9 9/16" (23mm) Arcos Perf II -I-5900 Die-formed
44-R. MOD 44 Recessed. Ordering Guide. Key Features. Fixture Type: Project Name: Quick Find litecontrol.com 44-R
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Ceiling Type DW Drywall PT Drywall with Plaster Trim LG 15/16 Grid Fixture distribution D Direct Row length (in
44-P-SD. MOD 44 Pendant Semi-Direct. Ordering Guide. Key Features 44-P-SD. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
72-P-SD. MOD 72 Pendant Semi-Direct. Ordering Guide. Key Features 72-P-SD. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 72 MOD Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
44-P-D. MOD 44 Direct Pendant. Ordering Guide. Key Features 44-P-D. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Mounting P Pendant Fixture distribution D Direct Row length (in feet) Enter in foot increments. Note fixture lengths
SDx Pendant Semi-Direct
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 18 SDx Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
44-R-WWD. MOD 44 Recessed Wall Wash Direct. Ordering Guide. Key Features 44-R-WWD. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Wall Wash Ceiling Type DW Drywall PT Drywall with Plaster Trim LG 15/16 Grid Fixture distribution WWD Wall Wash
Verve IV. Suspended linear direct/indirect fluorescent with radial or flat baffle or parabolic louver.
FLUORESCENT BAFFLE/LOUVER radial blade baffle flat blade baffle flat blade parabolic louver DIMENSIONAL DATA FEATURES Suspended linear direct/indirect fluorescent with radial or flat baffle or parabolic
Bruno BRM4-1 BRM4-2 BRM4-3. parabolic baffle. Each available with optional acrylic opal overlay.
Indirect / Direct T8 SPECIFICATIONS Pendant Mount Modular / 8 X 2 Rectangular CATALOG NUMBER FT Examples: 2 32 SPR 40FT R8 277 GEB0 DCT LP835 F/8 SCEP 3 32 SPR 32FT R8 277 GEB0 SE EL DCT LP835 F/2 AVAILABLE
34-W. V3 Adjustable Wall Valence. Ordering Guide. Key Features. Fixture Type: Project Name: Quick Find litecontrol.com 34-W
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 34 V3 Mounting W Wall Mounted Fixture distribution AI Asymmetric Indirect AID Asymmetric Indirect/Direct ASD Asymmetric
2 Photocell option available in endcap, tenon or corner assembly. 81.8% Efficiency. Nominal Row Length R4 R8 R12. X FT Must be in 4 increments
SPECIFICATIONS Construction Die-formed, pre-painted steel housing. Extruded aluminum fillers. Die-cast aluminum end caps. Highly specular aluminum end plates. Shielding GrateOptic curved, crenulated diffuser
Bionic Perimeter Standard C o v e & P e r i m e t e r
Type Job Name Catalog Number Bionic Perimeter Standard C o v e & P e r i m e t e r 5 7 /16" 110mm 6 7 /16" 170mm 8 7 /16" 221mm Flush Regress 3" Regress ordering - BIO-PSTD (STANDARD) series/ style lamp
Seem mm 4.50" 4.00" 101.6mm. Narrow 4" linear fluorescent allows for both individual or continuous runs.
FLUORESCENT recessed companion wall mount companion DIMENSIONAL DATA FEATURES Narrow 4" linear fluorescent allows for both individual or continuous runs. Frosted acrylic flush lens provides even illumination,
Evolution Outline RECESSED LINEAR PERIMETER OUTLINE SLOT SYSTEM
Evolution Outline Project Name Date Type RECESSED LINEAR PERIMETER OUTLINE SLOT SYSTEM 4-1/2 (114.3mm) 5-1/4 (133.4mm) LED Product Partner Extruded aluminum trim with formed cold rolled 20 gauge steel
Avenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm 4.3" 109.22mm
Avenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
Avenue A FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm
dimensions / lamping performance Voltage Ballast Type # of Emergency Modules GEB <20% THD Electronic (T8 only) GEB10 <10% THD Electronic Ballast
Lightline In the universe of high-performance linear lighting, nothing is as minimally dimensioned as Lightline. With a family of indirect, direct and recessed luminaires designed to fit any space, feel
FINA F48B 48 Direct and Uplight Architectural Round
Project Name Date Type FINA F48B 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish
EX3B. Project Name _ K 4000K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EX3B Project Name Date Type SUSPENDED BIDIRECTIONAL LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
FINA F48 48 Direct and Uplight Architectural Round
Project Name Date Type 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with
Bruno. dimensions / lamping. specifications. Die-formed cold-rolled steel housing. Die-cast aluminum flat or sculptured end cap.
Bruno Responding to a present-day penchant for classic rectilinear forms, Peerless Bruno moves front and center with its pure, low-profile shape and superlative indirect optics. Unique downlight design
2 1 /8" 2 1 /8" Use guide below to order complete fixture runs from four feet to three-hundred feet in increments of four.
LIGHTDUCT DIMINUTIVE INDIRECT Pendant Mount - Modular AVAILABLE FIXTURES 6 X 2 Rounded LDM1-1 LDM1-2 LDM1-3 Housing AA 6063 T6 extruded aluminum forming a x rounded channel. Die-cast end plate attaches
EX3. Project Name _ K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EDGE EX3 Project Name Date Type SUSPENDED DIRECT LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
FINA F36B 36 Bidirectional Architectural Round
Project Name Date Type FINA F36B 36 Bidirectional 4-1/2 4-7/8 (114.3mm) (123.8mm) 33-15/16 (862mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with 1/4 trim Aluminum
DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution.
DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. TYPE: Softly curved, Axle measures just NOTES: 2 11/16" by 3 11/16". With
Seem 6. Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic.
Seem 6 FLUORESCENT GRID parabolic louver DIMENSIONAL DATA grid 5.53" 14.6mm FEATURES Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted
131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 131 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x.0l x 4.0Dp (0 x 1220 x 100) LAMP 1 or 2 lamp
98PF-P-I Perforated Pendant Indirect. Ordering Guide. Key Features 98-P-I-PF. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 98 9800 Housing Style PF Perforated Mounting P Pendant Fixture distribution I Indirect Row length (in feet) Enter in foot
HSN, HSM, HIS, IC, TN, CC and IW Series
Miro 4 Enhanced Aluminum Reflector HSN, HSM, HIS, IC, TN, CC and IW Series Holophane offers a variety of industrial luminaires for a wide range of applications from the most demanding specialized industrial
EDGE EX6WET 6 Suspended Direct Linear WET
Project Name Date Type 4-11/16 (119mm) EDGE EX6WET 6 Suspended Direct Linear WET 5-3/4 (146mm) 5/16 (8mm) Key Features Approved for wet location unless otherwise noted. IP65 and IK10 rated Fixture is built
EDGE EV3WET 3 Recessed Linear WET
Project Name Date Type 4-13/16 (122mm) EDGE EV3WET 3 3-11/16 (94mm) 4-3/4 (121mm) 5/16 (8mm) Key Features Approved for wet location unless otherwise noted. IP65 and IK10 rated Fixture is built using corrosion
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M
PROJECT: TYPE: NOTES: DESCRIPTION Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. Softly curved, Axle measures just 2 11/16" by 3 11/16". With
AXLE LED WALL ASYMMETRIC INDIRECT W W W. L U M E N W E R X. C O M
DESCRIPTION PROJECT: Axle is an elegant and compact LED linear accent luminaire TYPE: providing efficient asymmetric light NOTES: distribution. Softly curved, Axle measures just 2 11/16" by 3 11/16". With
seem 4 grid features dimensional data performance
grid seem features Narrow " aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted acrylic flush lens provides even illumination, high performance
131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x 48.0L x 4.0Dp (300 x 1220 x 100) LAMP 1 or 2 lamp
nar o (năr ō) adj. small or slender in width, especially compared with length <linear fluorescent lamp, golf club, fettuccine, kate moss>
nar o (năr ō) adj. small or slender in width, especially compared with length don t worry, our design skills far exceed our spelling aptitude.
EDGE EX3 3 Suspended Direct Linear
Project Name Date Type 5-3/8 (36.5mm) EDGE EX3 3 Suspended Direct Linear 3-/2 (88.9mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring access
EDGE EX3B-WW 3 Suspended Bidirectional Linear Wall Wash
Project Name Date Type 5-3/8 (136.5mm) EDGE EX3B-WW 3 7/16 (11.1m) 3-1/2 (88.9mm) 11/16 (17.5m) Key Features 6063-T5 Extruded aluminum housing Extruded aluminum module with miro reflector for perfect wall
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M PROJECT: TYPE: NOTES: DESCRIPTION Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution.
solana semi-indirect indirect Low profile pendant with adjustable optics
semi-indirect indirect pendant Low profile pendant with adjustable optics Indirect lighting reduces glare and harsh shadows creating a comfortable environment and improving human performance. Lam Lighting
Dart. fixture information. Miniature suspended direct/indirect LED luminaire.
LED acrylic diffuser microglow lens wall mount companion DIMENSIONAL DATA FEATURES Miniature suspended direct/indirect LED luminaire. Excellent choice for lower ceiling applications and areas where ceiling
Catalog No. SHIELDING
I T E C T U R A L A R C H S E N S O R S PROJECT INFORMATION Project Name Catalog No. Type Date FEATURES Crisp shape with clean, elegant lines Direct/Indirect lighting elements Up to 3T8, T5 or T5HO lamps
EDGE EX3I 3 Suspended Indirect Linear
Project Name Date Type 5-/2 (40mm) EDGE EX3I 3 3-/2 (88.4mm) Key Features 6063-T6 Extruded aluminum housing Highly reflective = white painted reflector Room side maintance for LED system 5-year limited
Notes: (1) not recommended with staggered lamping (2) Not available with T8 lamping.
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEW 3 5/8" 92mm 2 1/4 57mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH (FT)
seem 4 suspended led features dimensional data mounting information performance Narrow extruded aluminum 4 linear direct LED.
suspended led features Narrow extruded aluminum 4 linear direct LED. Individual units and continuous runs in 1 increments. Continuous frosted acrylic lens provides uninterrupted illumination, without pixels
EDGE EX1 1 Suspended Direct Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended Direct Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
EDGE EX2 2 Direct Suspended Linear
Project Name Date Type 4-3/4 (120.7mm) EDGE EX2 2 Direct 2-1/4 (57.2mm) 2-7/8 (73mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring access available
Avenue A. Grid Mount (Open Shown) Drywall Flange (Open Shown) louver lens mr16
FLUORESCENT MR16 open optic cut-off louver clear lens flush mount mr16 (35 adjustment) extended yoke mr16 ( adjustment) snoot hex louver linear prismatic sand blasted soft focus DIMENSIONAL DATA Grid Mount
Notes: 3 13/32. (5) Please consult factory (6) Available with T8 lamp only
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct Indirect 3 13/32 ORDERING CODE 3 13/32 SHOWN WITH LENS OPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT
EDGE EX1B 1 Suspended Bidirectional Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended idirectional Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
BRUNO BRUNO. Keep a Low Profile with No-Nonsense Minimalism.
BRUNO BRUNO Keep a Low Profile with No-Nonsense Minimalism. Inspired by minimalist master Mies van der Rohe, the Bruno family celebrates the spirit of less-is-more modernism. Designed to achieve a no funny
avenue features dimensional data performance Narrow 3" slot T5 fluorescent with opaque satin lens.
features Narrow 3" slot T5 fluorescent with opaque satin lens. Shielding options include corrugated, solid regressed trim, concave louver as well as flush lens. Drywall installation is availale, which
Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire
Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire For additional configurations see our Product Catalog or visit our website at WINDIRECT TM 3 in1 Dual Lamp Ceramic Metal Halide CMH x 2 1
LiFT LF12 1x2 Architectural Recessed
Project Name Date Type LiFT LF12 1x2 5-5/8 (143mm) 1-5/8 (41.3mm) 11-5/8 (295.4mm) Key Features Formed 20 gauge cold rolled steel housing. Highly reflective die-formed white painted reflector Wiring access
Capable and versatile, the specification-grade LUMINATA II is an elegant lighting solution.
Capable and versatile, the specification-grade LUMINATA II is an elegant lighting solution. Sculpted end Extended end Conveying a strong sense of performance and aesthetic appeal, the suspended LUMINATA
Verve IV. fixture information. Suspended linear direct/indirect LED with frosted lens or Radial Baffle options.
LED radial blade baffle wall mount companion DIMENSIONAL DATA FEATURES Suspended linear direct/indirect LED with frosted lens or Radial Baffle options. One-piece steel housing with 5" die-cast end caps
J TO 4000 LUMEN 8 LED CYLINDER HYPERBOLIC/PARABOLIC/WALLWASH OPEN APERTURE LC8 SERIES DIMENSIONS 1-1/4
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Lumen packages suitable for ceiling heights ranging from 8 to over 50 Efficacies up to 80 lm/w Superior-quality white LED light output using Chip on Board technology
EDGE ET6 6 Recessed Linear EDGE Techx for Integrated Ceiling Systems
Project Name Date Type 5-3/4 (146.1mm) EDGE ET6 6 EDGE Techx for Integrated Ceiling Systems 5 (127mm) 5-13/16 (147.6mm) Key Features Extruded aluminum trim with formed cold rolled 20 gauge steel back box
Project Name. 24 (609.6mm) 24 (609.6mm)
Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 24 (609.6mm) 24 (609.6mm) 3 (76.2mm) Formed 20 gauge cold rolled steel housing Highly reflective die-formed white painted reflector Wiring access
Notes: 2 3/8" 60mm. (1) One lamp with satin lens only (2) Not available for T8 Add 9 per lamp. Specify quantity Requires 120V or 277V
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 2 3/8" 60mm ORDERING CODE 9 3/4 248mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
EDGE EX33 3 x 3 Suspended Direct Linear
Project Name Date Type 3-1/4 (82.6mm) 3 x 3 Suspended Direct Linear 2-1/4 (57.2mm) 2-7/8 (73mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring
PERIMETER - RECESSED. Flush BBPRLED OPRI ( 1) 14 PRODUCT ID LINEAR OR CORNER QTY TOTAL LENGTH. 3D VIEW - Inside Corner Pattern
Regressed 4" Regressed 3" Regressed 2" Flush Project Type 8 6 15 /16 5 15 /16 Notes 4 3 2 PERFORMANCE PER LINEAR FOOT AT 4K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 11 lm/w lm/ft 4.6
Apollo 8. lamping. patient bed pair example. 8" wide recessed patient bed light with exam function available in 2', 3' & 4' lengths.
FLUORESCENT RECESSED PATIENT BED LIGHT SYSTEM apollo 8 ambient only integral LED apollo 1 & 2 companion DIMENSIONAL DATA FEATURES 8" wide recessed patient bed light with exam function available in 2',
PERIMETER - RECESSED. Regressed 3" BMPRLED OPRI ( 1) 14 PRODUCT ID LINEAR OR CORNER QTY TOTAL LENGTH. 3D VIEW - Inside Corner Pattern
Flush Regressed 2" Regressed 3" Project Type 6 7 Notes PERFORMANCE PER LINEAR FOOT AT 4K 2 3 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 11 lm/w 5 lm/ft 4.6 W/ft 19 lm/w 75 lm/ft 7. W/ft
EDGE EX44 4 x 4 Suspended Direct Linear
Project Name Date Type 4 (101.6mm) EDGE EX44 4 x 4 Suspended Direct Linear 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
Avenue B. Grid Mount (Regress Trim Shown) Flush Lens. Drywall Flange (Regress Trim Shown) Narrow 3" slot LED with frosted satin lens.
LED corrugated regress trim solid regress trim flush lens DIMENSIONAL DATA Grid Mount (Regress Trim Shown) FEATURES Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid
Project Name. 24 (609.6mm)
2x4 Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 48 (1,219.2mm) 3 (76.2mm) 24 (609.6mm) Formed 20 gauge cold rolled steel housing Highly reflective die-formed white painted reflector Wiring
WALL MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW 9" 229mm 3 3/4" 95mm 4 3/4 121mm 7 1/8 181mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 CENTER OPTICS
EDGE EX4B 4 Suspended Bidirectional Linear
Project Name Date Type 4-3/4 (120.7mm) EDGE EX4 4 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Room-Side Maintenance
Project Name. 23-3/4 (603.3mm)
LUCEN 2x4 Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 3-3/4 (95.3mm) 48 (1224mm) 23-3/4 (603.3mm) Pre-painted formed 22 gauge cold rolled steel housing Highly reflective die-formed white painted
Notes: Please specify
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS NARROW 2 1/8" 54mm 6 152mm WIDE 2 1/8" 54mm ORDERING CODE 8 3/4 222mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS (1)
Notes: Indirect. 5 1/2" 140mm. 5 1/32 128mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct / Indirect Direct Indirect 5 1/2" 14mm 5 1/2" 14mm 5 1/2" 14mm SHOWN WITH LENS OPTION 5 1/32 128mm ORDERING CODE 5 1/32 128mm 5
Project Name. 23-5/8 (600.2mm)
LiFT 2x2 Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 23-5/8 (600.2mm) 23-5/8 (600.2mm) 5-5/8 (143mm) Formed 20 gauge cold rolled steel housing Highly reflective die-formed white painted reflector
Project Name. 4-1/4 (107.9mm) or 5-1/4 (133.4mm)
Project Name Date Type 4-/2 (4.3mm) 4-/4 (07.9mm) or 5-/4 (33.4mm) EDGE EVL Key Features Extruded aluminum trim with formed cold rolled 20 gauge steel back box housing EVL LED offered with a 5-year limited
RECESSED ASYMMETRIC MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 5" SHOWN WITH LENS OPTION 3 13/32 ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3
HP90 Recessed 2'X2' Fluorescent; T8, T5, T5HO or TT5
Page 1 of 5 Emergency Pack 1 5" (127mm) 24" (610mm) 2-1/2" (64mm) 2" X 2-1/2" Wiring access plate with (2) 7/8" dia. K.O.'s Ordering Information HP90 H9 Direct/Indirect Recessed Fluorescent Body Style
Nera. detail. fixture information. Unique aesthetic inspired by the visual void design philosophy. Luminaire sizes available in 2 x2, 3 x3 and 4 x4.
LED bottom detail inside lens detail white finish palladium finish 2016 DIMENSIONAL DATA FEATURES Unique aesthetic inspired by the visual void design philosophy. Luminaire sizes available in 2 x2, 3 x3
Specular louver Semispecular. PRF Perforated Top Cover SLD Solid Top Cover. louver. FUS GLR fuse for each ballast
Photometric Drawing for (1) 28W T5 Lamp CATALOG NUMBER FIXTURE OVERALL ROW LENGTH MAX SECTION LENGTH SHIELDING TOP COVER LAMPING (SEE CROSS SECTION) VOLTAGE OPTIONS* ET1S Enthuse Surface-mount # # must
MEDMASTER DOWNLIGHT Luminaires for Surgical Applications
PRODUCT FEATURES: 6" sealed, recessed downlight with regressed or flush lens trim Conducted emissions controlled as per MIL-STD-461F Delivered lumens: 794-5,543 lm 1% Dimming via 0-10V, DALI or EcoSystem
WALL MOUNT. Notes: Project: Type: PROJECT INFORMATION DIMENSIONS SECTION VIEWS ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 1/16" 78mm 4 102mm 4 102mm 4 3/8 111mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
COVE C CV N - - Architectural Cove Mount. Key Features CRI, CCT & OUTPUT LENGTH 1 MOUNTING VOLTAGE DRIVER CIRCUITING _ N
Project Name Date Type 2-13/16 2-9/16 3-15/16 Key Features Toolless 3 position adjustable head Integral Driver Wiring Quick Connection for rows 5-year limited warranty covers LED, driver and fixture UL
Seem 4. Narrow extruded aluminum 4" linear direct/indirect LED with Pop-lens options.
LED DIRECT/INDIRECT flush lens top & bottom pop-up lens & pop-down lens pop-up lens & flush lens bottom end detail single point corner suspension linear direct only companion wall to ceiling corner companion
Avenue B. Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid regressed trim or flush lens.
LED corrugated regress trim solid regress trim flush lens DIMENSIONAL DATA FEATURES Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid regressed trim or flush lens.
PHONE: (303) FAX: (970) WEBSITE:
REPORT NUMBER: ITL77175 PAGE: 1 OF 5 CATALOG NUMBER: 2-5105-24 LUMINAIRE: FABRICATED SPECULAR METAL HOUSING, FORMED WHITE PAINTED METAL REFLECTOR, TRANSLUCENT WHITE ACRYLIC DIFFUSER. BALLAST IS EXPOSED
LINERO L_6A Suspended Linear
Project Name Date Type LINERO L_6 -/8 (28.6mm) -9/6 (39.7mm) -/8 (28.6mm) -3/6 (39.7mm) 6-9/6 (66.2mm) 6-7/8 (74.6mm) Key Features One piece die-formed 8 gauge steel housing Highly reflective die-formed
Skydome. Pendant mount LED round dome with acrylic diffuser. Nominal 2', 3' or 4' diameter housings are available.
LED STEM/CABLE MOUNT bay blue - gloss fabulous fuscia - gloss golf green - gloss modest mushroom - gloss titanium silver matte black cable mount canopy detail surface mount companion recessed companion
Recessed Square. Downlight. BASYS with LED Light Engine BS4DLED BS4D LED. Type: Project: online Find it Fast 756. IBEW Union Made BASYS LED HOUSING
BASYS with LED Light Engine Recessed Square " Type: online Find it Fast 75 BSD LED FIXTURE WATTAGE CCT (K) DISTRIBUTION DRIVER OPTIONS BASYS Square " Recessed Direct White LED CRI = 85 typical R9 = typical
Wall/Slot 2000 LED.
Wall/Slot 2000 LED www.litecontrol.com Wall/Slot 2000 LED Recessed Perimeter Luminaire Best practice recognizes the benefits of placing light on walls and ceilings to articulate architecture, influence
PRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW
Project Type Notes END VIEW 3 7/16" 87mm 3 15/16" 1mm ORDERING GUIDE CONTROL SENSORS S PRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW AIR Wall S satin lens 3 3 T5 T5 1 1 lamp AP
apollo 8 patient bed light with LED options features dimensional data performance
patient bed light with LED options features 8" wide recessed patient bed light with LED options available in 4' & 5' lengths. T5 or T8 lamps provide reading and ambient illumination, additional T5HO lamps
RPX. Specular louver Semispecular RSX. louver. FUS GLR fuse for each ballast IDS
Photometric Drawing for (1) 28W T5 Lamp CATALOG NUMBER FIXTURE OVERALL ROW LENGTH MAX SECTION LENGTH SHIELDING LAMPING (SEE CROSS SECTION) VOLTAGE OPTIONS* EF1P Enform 1 Pendant # # must be specified in
Project Name ADEO AD22 EMERGENCY. G1-15/16 Grid G9-9/16 Grid GS - Screw Slot Grid FL - Flanged S - Surface Mount. Mounting pg. 3
Project Name Date Type ADEO AD22 ADEO (AD22) 2x22x2 Architectural Recessed Side View 3 3 (76.2mm) (76.2mm) 24" (609.6mm) 24" (609.6mm) Key Features Formed 20 gauge cold rolled steel housing Highly reflective
Cynergy Series Retrofit Kit
project: fixture type: catalog #: quantity: The Cynergy Series LED Retrofit system has been developed to dramatically improve existing recessed troffer performance using Solid State Lighting (SSL) technologies.
CONVERJ CJ14 1x4 Architectural Recessed
Project Name Date Type CONVERJ CJ14 1x4 Architectural Recessed 3-1/2" (88.9mm) 12" (304.8mm) Key Features Formed 20 gauge cold rolled steel housing. Highly reflective die-formed white painted reflector
CONVERJ CJ22 2x2 Architectural Recessed
Project Name Date Type CONVERJ CJ22 2x2 Architectural Recessed 3-1/2" (88.9mm) 24" (609.6mm) Key Features Formed 20 gauge cold rolled steel housing. Highly reflective die-formed white painted reflector.
BSS610 GENERAL INFORMATION - FIXTURE HOUSING
BSS610 GENERAL INFORMATION - FIXTURE HOUSING 2 wide multi-axis direct LED luminaire system Project: Type: FEATURES Create an endless variety of multi-directional fixture runs and geometric shapes with
EDGE EV3WW 3 Recessed Linear Wall Wash
Project Name EDGE 3WW EV3WW Date Type 3 (72.6mm) EDGE EV3WW 3 5/8 (30.2mm) 7/6 /6 (.m) See Mounting Section (7.5m) Key Features Extruded aluminum trim with formed cold rolled 20 gauge steel back box housing
Project Name ADEO AD24 EMERGENCY. G1-15/16 Grid G9-9/16 Grid GS - Screw Slot Grid FL - Flanged S - Surface Mount. Mounting pg. 3
Project Name Date Type ADEO AD24 ADEO 2x2 (AD22)Recessed 2x4 Architectural Side View 3 3 (76.2mm) (76.2mm) 24" (609.6mm) 24" (609.6mm) Key Features Formed 20 gauge cold rolled steel housing Highly reflective