BRUNO BRUNO. Keep a Low Profile with No-Nonsense Minimalism.

Size: px

Start display at page:

Download "BRUNO BRUNO. Keep a Low Profile with No-Nonsense Minimalism."

Laurence Sanders
6 years ago
Views:

1 BRUNO BRUNO Keep a Low Profile with No-Nonsense Minimalism. Inspired by minimalist master Mies van der Rohe, the Bruno family celebrates the spirit of less-is-more modernism. Designed to achieve a no funny business aesthetic, Bruno s clean lines bring clarity to interior spaces, epitomizing Rohe s philosophy: Ornament is crime.

2 Bruno Louver Perkins + Will, Washington DC office Lighting Consultant: Patricia Kazinski Maxwell MacKenzie

3 Bruno Softshine Scentsy, Boise, ID BRS Architects ESI Construction Phil McClain Photography

4 Bruno Louver USGBC Headquarters, Washington, D.C. Envision Design Eric Laignel Photography

5 Bruno Indirect TAFT Building, Hollywood, CA Gensler Charles LeNoir Photography

6 Bruno I/D Simon Fraser University School for Contemporary Arts, Burnaby BC, Canada Proscenium Architecture & CEI Architecture Ed White Photographics

BRM1 Indirect 0% Direct, 77 88% Efficiency BRM3 Holes Indirect 5 10% Direct, 79 88% Efficiency BRM4 Indirect-Direct 35 100% Direct, 52 89% Efficiency BRM7 Partial Perforation Indirect 4 5% Direct, 75

rectangular housing is formed from cold-rolled steel. Die-cast end caps are mechanically attached with no exposed fasteners. REFLECTORS Die-formed specular reflector with 95% reflectance.

BRM4: Choose one of four parabolic baffle options: semi-specular, white painted, semispecular perforated blade or white painted, perforated blade. Each available with optional acrylic opal overlay.

FINISH Fine-textured, white polyester powder paint is standard. Drop pan on BRM3 is always painted aluminum (C110). Custom colors available, consult factory. ELECTRICAL Specify 120V, 277V or 347V.

LUMINAIRE LENGTH 4 3 8, 8 and 12 lengths in a single section for nominal support spacing at 4, 8 and 12. For total luminaire length, add 5 8 for each flat end cap and 4 for each sculptured end cap.

7 BRM1 Indirect 0% Direct, 77 88% Efficiency BRM3 Holes Indirect 5 10% Direct, 79 88% Efficiency BRM4 Indirect-Direct % Direct, 52 89% Efficiency BRM7 Partial Perforation Indirect 4 5% Direct, 75 79% Efficiency BRM9 Diffuser Indirect 4 8% Direct, 75 92% Efficiency BRM9 Softshine Indirect % Direct, 61 92% Efficiency SPECIFICATIONS DIMENSIONS / LAMPING OPTIONS CONSTRUCTION Nominal x rectangular housing is formed from cold-rolled steel. Die-cast end caps are mechanically attached with no exposed fasteners. REFLECTORS Die-formed specular reflector with 95% reflectance. SHIELDING BRM3: Aluminum, die-formed drop pan with five cylinder openings of down light feature. Also available with acrylic opal overlay on top of down light openings. BRM4: Choose one of four parabolic baffle options: semi-specular, white painted, semispecular perforated blade or white painted, perforated blade. Each available with optional acrylic opal overlay. BRM7: Die-punched perforations with acrylic opal diffuser overlay. BRM9: Die-formed drop acrylic diffuser or flush Softshine high-performance lens. FINISH Fine-textured, white polyester powder paint is standard. Drop pan on BRM3 is always painted aluminum (C110). Custom colors available, consult factory. ELECTRICAL Specify 120V, 277V or 347V. Pre-wired with 16AWG luminaire wires. For special circuiting or wire gauge, consult factory. Plug-in electrical connectors included. UL and C-UL listed. LUMINAIRE LENGTH 4 3 8, 8 and 12 lengths in a single section for nominal support spacing at 4, 8 and 12. For total luminaire length, add 5 8 for each flat end cap and 4 for each sculptured end cap. Using internal joiners, 4, 8 and 12 sections can be joined to form longer rows BRM1 Indirect (1, 2, 3) T5, T5HO, T8 BRM3 Holes BRM4 I/D 1 2 BRM9 Diffuser (1, 2, 3) T5, T5HO, T8 BRM7 Partial Perf (2) T5, T5HO, T8 QUICKSHIP Products shown with a QuickShip icon are part of our express program and ship within five days of order activation. Visit PeerlessLighting.com for details. CONFIGURATIONS Tenon L, T, X and straight connectors available for suspended configurations. Additional pattern connector details available at PeerlessLighting.com. SMART LUMINAIRE Integrated occupancy sensing, daylight detection and/or network control available. Limitations may apply, see specification sheets on website for details and option code. Sculptured end cap Tenon L connector ORDERING INFORMATION Luminaire # of Lamps in Cross Section BRM1 BRM3 BRM4 BRM9 BRM Lamp Type Reflector Distribution 1 (BRM4 and BRM9 only; Not available with DU option) 28T5 28W T5 (Not available in 347V) 54T5HO 54W T5HO 32 32W T8 28T5 28W T5 (Not available in 347V) 54T5HO 54W T5HO 32 32W T8 SPR Specular reflector Blank Standard; 70% up; 30% down 20/ % up, 80% down 40/ % up, 60% down (BRM4 only) 0/100 2,3 0% up, 100% down CLI 4 Center lamp isolater (BRM4 only) 1 BRM9: Available with SSH option only. Nominal distribution, refer to photometric tests for exact distribution. 2 BRM4: Nominal distribution, refer to photometric tests for exact distribution. 3 BRM9: Not available with 3-lamp 54T5HO luminaires. 4 BRM4: Available with 3-lamp cross section luminaires only. Shielding (BRM3, BRM4, and BRM9 only) OPD Opal diffuser overlay (BRM3, BRM4) ODD Opal drop diffuser (BRM9 only) SSH Softshine high performance lens (BRM9 only) Baffle (BRM4 only) SSB Semispecular WPB White painted SSP Semispecular perforated blade WPP White painted perforated blade Luminaire Row Length X FT 4 increments Maximum Section Length R4 R8 R12 4 section(s) 8 section(s) 12 section(s) Voltage Ballast Type GEB10 <10% THD Electronic OS5C* Osram Line or 0-10V (T8) ADEZ* Advance Mark 10 dim (T8, T5HO) ADZT* Advance Mark V dim DMHL3D* Lutron Hi-Lume dim *Not available in 347V. Reference Ballast Wizard on website or consult factory for other options. # of Emergency Modules 1SE 1 section 2SE 2 sections XSE X sections Emergency Type* Switching Lamp Color Mounting Type / Overall Suspension EC Emergency circuit EL Emergency battery pack (Not available in 347V) EN Emergency battery pack w/night light circuit (Not available in 347V) *Emergency type is installed in last 4 of luminaire sections. Separate feed required unless ELS or ELS2 is specified. SCT Single circuit DCT Dual circuit L/LP No lamp L/LPE No lamp. Wired for energy saving T8 lamps. LP K 80+ CRI LP K 80+ CRI LP K 80+ CRI Available with T5 only: LP830P 3000K 80+ CRI Premier LP835P 3500K 80+ CRI Premier LP841P 4100K 80+ CRI Premier Reference Lamp Chart on website or consult factory for other options. Mounting Type / F1/ T-bar ceiling (universal mounting bracket) F1A/ T-bar ceiling (UMB with integrated J-box) F2/ Hard ceiling (horizontal J-box) F3/ Rigid stem F4A/ IDS clip tee F4B/ IDS clip 9 16 tee F4C/ IDS clip screw slot XX XX Overall suspension is measured from ceiling to bottom of luminaire. Finish Options C110 Painted aluminum (low gloss) C210 White white (finetextured low gloss) C099 Custom finish WALL MOUNT COMPANIONS ACG Adjustable cable grippers BLK Black cord, cord manager and canopy (not available with F3) CP Chicago plenum (available with F1A only) DL Damp location label DU Dust cover (BRM1, BRM3, BRM4, BRM9, not available with 3-lamp T5HO cross section) ELH Emergency through wiring w/separate feed ELS Emergency through wiring w/single feed, shared neutral ELS2 Emergency through wiring w/single feed, separate neutrals GLR Fusing (fast blow) GMF Fusing (slow blow) MCS Matching feed canopy at support NYC New York City code OJB Offset junction box SCEP Sculptured end cap SLP Sloped ceiling (for 10-45, must be specified along with F2, ACG and OJB options) XXXX Smart luminaire (see note above) Sample Catalog Number: BRM1 2 28T5 SPR 40FT R8 277 GEB10 DCT LP835 F1/18 C210 SCEP

BRW1 Indirect 0% Direct, 61 71% Efficiency BRW3 Holes Indirect 7 11% Direct, 62 84% Efficiency BRW4 Indirect-Direct 25 42% Direct, 67 86% Efficiency BRW7 Partial Perforation Indirect 1 2% Direct, 59

CONSTRUCTION Nominal 8 1 4 x rectangular housing is formed from cold-rolled steel. Die-cast end caps are mechanically attached with no exposed fasteners. REFLECTORS Die-formed white painted reflector.

BRW4: Choose one of four parabolic baffle options: semi-specular, white painted, semispecular perforated blade or white painted, perforated blade. Each available with optional acrylic opal overlay.

FINISH Fine-textured, white polyester powder paint is standard. Drop pan on BRW3 is always painted aluminum (C110). Custom colors available, consult factory. ELECTRICAL Specify 120V, 277V or 347V.

LUMINAIRE LENGTH 4 1 16, 8 and 12 lengths in a single section. For total luminaire length, add 5 8 for each flat end cap and 4 for each sculptured end cap.

8 BRW1 Indirect 0% Direct, 61 71% Efficiency BRW3 Holes Indirect 7 11% Direct, 62 84% Efficiency BRW4 Indirect-Direct 25 42% Direct, 67 86% Efficiency BRW7 Partial Perforation Indirect 1 2% Direct, 59 67% Efficiency BRW9 Diffuser Indirect-Direct 7 25% Direct, 57 76% Efficiency BRW9 Softshine Indirect-Direct 7 25% Direct, 57 76% Efficiency Bruno Wall SPECIFICATIONS DIMENSIONS / LAMPING OPTIONS CONSTRUCTION Nominal x rectangular housing is formed from cold-rolled steel. Die-cast end caps are mechanically attached with no exposed fasteners. REFLECTORS Die-formed white painted reflector. SHIELDING BRW3: Aluminum, die-formed drop pan with five cylinder openings of down light feature. Also available with acrylic opal overlay on top of down light openings. BRW4: Choose one of four parabolic baffle options: semi-specular, white painted, semispecular perforated blade or white painted, perforated blade. Each available with optional acrylic opal overlay. BRW7: Die-punched perforations on lower housing with acrylic opal diffuser overlay. BRW9: Die-formed, opal drop diffuser or flush Softshine high performance lens. FINISH Fine-textured, white polyester powder paint is standard. Drop pan on BRW3 is always painted aluminum (C110). Custom colors available, consult factory. ELECTRICAL Specify 120V, 277V or 347V. Pre-wired with 16AWG luminaire wires. For special circuiting or wire gauge, consult factory. Plug-in electrical connectors included. UL and C-UL listed. LUMINAIRE LENGTH , 8 and 12 lengths in a single section. For total luminaire length, add 5 8 for each flat end cap and 4 for each sculptured end cap. Using internal joiners, 4, 8 and 12 sections can be joined to form longer rows BRW1 Indirect BRW7 Partial Perf (1, 2) T5, T5HO, T8 BRW3 Holes BRW4 I/D BRW9 Diffuser (1, 2) T5, T5HO, T8 BRW9 Softshine (1) T5, T5HO, T8 QUICKSHIP Products shown with a QuickShip icon are part of our express program and ship within five days of order activation. Visit PeerlessLighting.com for details. CONFIGURATIONS Tenon inside, outside and straight connectors available for wall configurations. Additional pattern connector details available at PeerlessLighting.com. Sculptured end cap ORDERING INFORMATION Luminaire BRW1 BRW3 BRW4 BRW7 BRW9 # of Lamps in Cross Section 1 2 (Not available with BRW9 Softshine) Lamp Type Reflector Shielding (BRW3, BRW4 and BRW9 only) 28T5 28W T5 (Not available in 347V) 54T5HO 54W T5HO 32 32W T8 WHR White reflector OPD Opal diffuser overlay (BRM3, BRM4) ODD Opal drop diffuser (BRM9 only) SSH Softshine highperformance lens (BRM9 only) Baffle (BRW4 only) SSB Semi-specular WPB White painted SSP Semi-specular perforated blade WPP White painted perforated blade Luminaire Row Length X FT 4 increments Maximum Section Length R4 R8 R12 4 section(s) 8 section(s) 12 section(s) Voltage Ballast Type GEB10 <10% THD Electronic OS5C* Osram Line or 0-10V (T8) ADEZ* Advance Mark 10 dim (T8, T5HO) ADZT* Advance Mark V dim DMHL3D* Lutron Hi-Lume dim *Not available in 347V. Reference Ballast Wizard on website or consult factory for other options. # of Emergency Modules 1SE 1 section 2SE 2 sections XSE X sections Emergency Type* Switching Lamp Color Finish Options EC Emergency circuit EL Emergency battery pack (Not available in 347V) EN Emergency battery pack w/night light circuit (Not available in 347V) *Emergency type is installed in last 4 of luminaire sections. Separate feed required unless ELS or ELS2 is specified. SCT Single circuit L/LP No lamp DCT Dual circuit L/LPE No lamp. Wired for energy saving T8 lamps. LP K 80+ CRI LP K 80+ CRI LP K 80+ CRI Available with T5 only: LP830P 3000K 80+ CRI Premier LP835P 3500K 80+ CRI Premier LP841P 4100K 80+ CRI Premier Reference Lamp Chart on website or consult factory for other options. C110 Painted aluminum (low gloss) C210 White white (fine-textured low gloss) C099 Custom finish DL Damp location label DU Dust cover (BRW9: Ambient conditions not to exceed 35 C for 2-lamp 54T5HO) ELH Emergency through wiring w/separate feed ELS Emergency through wiring w/single feed, shared neutral ELS2 Emergency through wiring w/single feed, separate neutrals GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code SCEP Sculptured end cap Sample Catalog Number: BRW1 2 28T5 WHR 40FT R8 120 GEB10 DCT LP835 C210 SCEP

Bruno BRM4-1 BRM4-2 BRM4-3. parabolic baffle. Each available with optional acrylic opal overlay.

Bruno BRM4-1 BRM4-2 BRM4-3. parabolic baffle. Each available with optional acrylic opal overlay. Indirect / Direct T8 SPECIFICATIONS Pendant Mount Modular / 8 X 2 Rectangular CATALOG NUMBER FT Examples: 2 32 SPR 40FT R8 277 GEB0 DCT LP835 F/8 SCEP 3 32 SPR 32FT R8 277 GEB0 SE EL DCT LP835 F/2 AVAILABLE