for environmentally critical applications
|
|
- Josephine Mathews
- 5 years ago
- Views:
Transcription
1 Enviroseal LINEAR Wraparound Luminaires for environmentally critical applications ENVIRONMENTAL Transportation Food Processing Hazardous Location
2 table of contents ES, HES, FES Series EnviroSeal Features TES Series Luxtran EnviroSeal Features Other Kenall Linear Wraps Performance Listings & Applications EnviroSeal...10 Other Linear Wraps Millenium Stretch Nova Sheriff Ranger Specification Sheets Performance Listings Hazardous Location HES T-Number Ratings...27 ENVIROSEAL Wraparound luminaires Designed For Environmental Performance Wraparound luminaires have long been a mainstay of the lighting specifier s toolbox. Their luminous sides help create bright, cheerful spaces and produce higher levels of vertical illumination. Now Kenall brings you a wraparound luminaire that also provides an exceptional level of environmental performance EnviroSeal. EnviroSeal is a family of ceiling and wall-mounted wraparounds in versions specifically designed for four different types of environmentally demanding applications: ES Series Environmental HES Series Hazardous FES Series Food Processing TES Series Transportation EnviroSeal luminaires are UL/CUL Wet Location listed, making them ideal for both interior and exterior use. The high impact resistant polycarbonate or DR acrylic lens contribute to EnviroSeal's industry-leading durability. Plus, EnviroSeal luminaires with polycarbonate lenses are backed by our exclusive Peace of Mind Guarantee against breakage. Lamping options include T5, T5HO, T8, T8HO, biaxial fluorescent, and LED. Environmental: EnviroSeal ES Series Environmental luminaires are perfect for academic, institutional and other applications where luminaires are subject to physical abuse or corrosion. These tough luminaires feature one-piece seam-welded housings with extruded polycarbonate or DR acrylic high impact-resistant lenses, and tamper-resistant fasteners. It's a design that surpasses all similar products ability to withstand vandalism and corrosive conditions such as coastal or chemical applications. The optional UL certification provides ingress protection against dust and water. Hazardous Location: Many industrial and scientific facilities store chemicals and other volatile materials that pose a danger of combustion. EnviroSeal HES Series Hazardous Location luminaires feature high limit T-Ratings (please see page 27), are classified for use in NEC Class I, Division 2, Groups A, B, C, and D areas, and are optionally available with the rating. Food Processing: Food processing areas require luminaires that resist contamination, are easy to clean, contain no toxic materials, resist corrosion, and prevent leakage into the luminaire. That s why the FES Series EnviroSeal luminaires feature stainless steel housings and fittings, antimicrobial finishes, and debris- and moisture-tight construction. Effective performance is ensured by NSF2 Splash Zone and optional ratings. (Please consult factory for availability of NSF Food Zone listing.) Transportation: Whether lighting railway platforms, stairwells, or pedestrian tunnels, Kenall offers an TES Series EnviroSeal Luxtran Transportation luminaire designed for the job. Stainless steel housings, hinges, and fasteners resist corrosion, while high impact-resistant polycarbonate or DR acrylic lenses withstand vandalism. UL/CUL Wet Location listing means they can be used indoors or out, while UL certification assures a more rigorous test and suitability for hosedown and dust-tight applications. 2
3 Opposite Page: EnviroSeal heavy-gauge cold rolled or stainless steel housings and high impact-resistant DR acrylic or polycarbonate lenses are designed to endure extreme conditions that are typical of public transportation applications. Top Left: The EnviroSeal integral endcaps allow for attractive, easy to install, and efficient tandem mounting, as seen in this train station. Bottom Left: The National Sanitation Foundation (NSF) Splash Zone listing, standard with EnviroSeal Food Processing luminaires, makes them an ideal choice for industrial kitchens, cafeterias, and other food service areas. Top Right: The HES Series EnviroSeal Hazardous Location series stands up to every rigid requirements of tough Class 1, Division 2 environments. Bottom Right: The Environmental EnviroSeal luminaires are ideal for the most challenging environments, such as this pedestrian walkway. 3
4 Enviroseal FEATURES: ES Series environmental, FES Series FOOD PROCESSING, AND HES SEries HAZARDOUS One-piece housing/endcap is heavy-gauge, seam-welded cold rolled steel. For even greater corrosion resistance, a Type 304 or 316 stainless steel housing is available with a Type 4B post-fabricated brushed finish. High impact extruded DR acrylic or polycarbonate lens with internal linear prisms and smooth exterior ensures ease of cleanability. With the option, a proprietary gasket-to-gasket system secures the lens-to-housing seal. option provided with gasketed removable endcaps to ensure ingress protection against dust and water. Shock-resistant sockets with internal locking collar ensure positive lamp retention. Silicone pad gasket on endcaps seals lens. Energy-efficient lenses, lamps and ballasts translate to fewer fixtures, resulting in lower installation, system and utility costs while extending lamp life. Slide-in-place and lock lens secures seal and allows ease of installation. (see page 5) Housing Seam-welded 20-gauge one-piece cold rolled steel with 1,000-hour salt-spray tested TGIC polyester powder finish. Optional Type 304 or Type 316 stainless steel housing. Type 4B Brushed finish standard; TGIC polyester powder coat available. ES, FES, and HES Series EnviroSeals feature integral endcaps; option provided with removable endcaps. Lens secured in housing channels with stainless steel fasteners. Available in 3", 5", 8", and 12" widths. Available in 2', 3', 4', 6', and 8' (tandem) lengths, suitable for continuous row mounting. Tandem configurations available with. Lens Choice of clear or pearlescent UV-resistant polycarbonate or DR acrylic lens with internal linear prisms and smooth exterior. Electrical Accommodates the latest and most efficient lamps and ballasts T5, T5HO, T8, T8HO, Biax, and LED. Kenall high abuse luminaires are designed and built to take exceptional physical punishment. When installed according to our instructions, Kenall will repair or replace any high abuse fixture with polycarbonate lens that is rendered inoperable due to physical abuse for the product life of the original installation. Listings UL and CUL Listed for Wet Location covered ceiling (with integral endcaps). Optionally UL and CUL Wet Location Listed for horizontal wall mount (with removable endcaps, WW option.) UL and CUL Listed for Damp Location horizontal wall mount (integral endcaps). ES, FES, and HES Series optionally UL certified in compliance with IEC ceiling mount. FES Series standard with NSF2 Splash Zone listing (consult factory for availability of Food Zone listing). HES Series Hazardous Location fixture classified for use in NEC Class I, Division 2, Groups A, B, C, and D areas. Please refer to pages for spec sheets 4
5 Enviroseal FEATURES: ES Series, FES Series, HES SEries Four Profiles EnviroSeal luminaires are available in a variety of sizes and lamp configurations offering a selection of luminaires that are suitable for an array of applications. Included are four widths: 3" one lamp 5" one or two lamps 8" two lamps 12" two, three, or four lamps Available lengths include 2', 3', 4', 6', and 8' (tandem). Continuous Row mount Whereas traditional removable endcap designs require joiner bands for continuous row mounting, the integral endcaps of the ES Environmental, FES Food Processing and HES Hazardous Series EnviroSeals accommodate this desirable ability (not suitable for luminaires with the option, except in tandem applications). When specified with the KO option, an.875" diameter knockout is provided. A simpe hub connector (HC option) quickly and easily joins luminaires. Perfect for walkways, corridors, and locker rooms, EnviroSeal is the best choice for a variety of continuous row-mount applications. pendant mounting The pendant mount option (PM Option) is available with 3" and 5" wide luminaires in the ES Series Environmental, FES Series Food Processing, and HES Hazardous Series. When specified, the option provides two 7/8-inch diameter openings for attachment of conduit pendants (hardware by others). EnviroSeal Hazardous Series luminaires are also supplied with a steel plate to accommodate threaded piping. Pendant mounted EnviroSeal luminaires are ideal for industrial locations where high ceilings are common. Slide-IN-place AND lock lens The standard EnviroSeal luminaire with integral endcaps features an uniquely designed slide-in-place and lock lens for easy lens installation and access to lamps. To install, angle one end of the lens into the housing and lens channel. Press the lens into the lens channel, squeeze the lens in the middle, and slide lens into place, centered in the luminaire. Install the retention fastener to secure the lens. To relamp, simply remove the retention fastener, slide lens toward endcap, and remove. Luminaires with the option require simple removal of the endcaps for quick relamping. 5
6 TES Series luxtran TRANSPORTATION Enviroseal Features Housing and baseplate are heavy-gauge, type 304 or 316 stainless steel with post-fabricated Type 4B brushed finish. Continuous 1" open leaf stainless steel hinge supports lens housing for easy relamping in the field. Triple silicone gasketing system at the hinge ensures the debris- and water-tight seal. Raceway allows ease of through-wiring. TES Series GASKETING Internal locking socket collar keeps lamps secure and operating properly even in high-vibration applications such as train stations, passenger platforms and other transportation facilities. Energy-efficient lenses, lamps, and ballasts translate to fewer fixtures, resulting in lower installation, system, and utility costs while extending lamp life. High impact extruded DR acrylic or polycarbonate lens with internal linear prisms and smooth exterior ensures ease of cleanability. LENS HOUSING/BASEPLATE Continuous seam welded type 304 or type 316 stainless steel baseplate and lens housing with integral endcaps. Type 4B Brushed finish standard; TGIC polyester powder coat available. Lens secured in housing channels with stainless steel fasteners. Continuous 1" open leaf stainless steel hinge secured to lens housing with stainless steel fasteners. Baseplate provided with.875" diameter punched, flattened knockouts for conduit entry on either end. Available in 5" and 8" widths. Available in 2', 3', and 4' lengths. GASKETING Silicone gasketed between housing and baseplate, and at endcaps; triple silicone gasketing between hinge and housing. Lens Choice of clear or pearlescent UV-resistant polycarbonate or DR acrylic lens with internal linear prisms and smooth exterior. Kenall high abuse luminaires are designed and built to take exceptional physical punishment. When installed according to our instructions, Kenall will repair or replace any high abuse fixture with polycarbonate lens that is rendered inoperable due to physical abuse for the product life of the original installation. Electrical Accommodates the latest and most efficient lamps and ballasts T5, T5HO, T8, T8HO, and LED. Listings UL and CUL Listed for Wet Location covered ceiling or horizontal wall mount. UL certified in compliance with IEC ceiling mount. Please refer to pages for spec sheets 6
7 TES Series luxtran TRANSPORTATION Enviroseal Features TWO Profiles TES Series EnviroSeal luminaires are available in a variety of sizes and lamp configurations offering a selection of luminaires that are suitable for an array of applications. Included are two widths: 5" one or two lamps 8" two lamps Available lengths include 2', 3', and 4'. FasDraw lens closure SYSTEM Kenall's proprietary FasDraw internal fastening system ensures that the TES EnviroSeal seals easily without the need for unsightly external latches. As the fastener is driven into the housing, it applies tension to the flange and draws the lens housing securely against the baseplate, allowing hosedown listing. lens housing The TES Series EnviroSeal lens housing is secured to the baseplate with a gasketed, piano-type hinge that runs the length of the lens. The hinge supports the lens housing for easy relamping and low maintenance. The lens housing is secured with captive Torx fasteners. WIRING RACEWAY and Continuous Row mount The baseplate of the TES Series features a raceway for ease of through-wiring, and provides a convenient way to accommodate continuous row applications. The standard.875" diameter knockouts on either end of the baseplate allow the luminaires to be joined simply with a simple hub connector (HC option). 7
8 OTHER LINEAR WRAPAROUND LUMINAIRES FROM KENALL millenium stretch FOR ARCHITECTURALLY SENSITIVE HIGH ABUSE APPLICATIONS Because the architectural high-abuse Millenium Stretch can be specified in individual, continuous row, and various geometric configurations, it can be used throughout an entire facility. This high school features Stretch luminaires in its locker rooms, corridors, stairwells, athletic facilities, and foyers. The Millenium Stretch features an extruded aluminum housing with die-cast endcaps, and is UL/CUL Wet Location Listed (covered ceiling mount) and IP64 Rated (ceiling mount). Nova INJECTION MOLDED HIGH ABUSE FLUORESCENT Nova s UL/CUL Wet Location listing for covered ceiling applications, and its durable, high impact-resistant, injectionmolded polycarbonate lens means it can easily stand up to the challenging environmental and potentially physical punishment this athletic facility locker room can dish out. It is ideal for any public access areas, such as restrooms, showers, corridors, and dormitory facilities. The Nova is also available in a Wet Location Listed wall mount version. 8
9 OTHER LINEAR WRAPAROUND LUMINAIRES FROM KENALL sheriff RUGGED HIGH ABUSE WELDED WRAPAROUND With a 16-gauge cold-rolled steel housing and polycarbonate lens, the Sheriff is the perfect choice where consistently high levels of abuse are likely, such as this inner-city pedestrian walkway or supervised areas in detention facilities. The Sheriff is UL/CUL Wet Listed for covered ceiling mount and Damp Listed for wall mount. An optional stainless steel version is ideal for Transportation applications. An optional Wet Listed wall mount version is also available. RANGER ROUGH SERVICE WRAPAROUND Its high-impact acrylic lens makes the Ranger suitable for areas that are occasionally subject to rough treatment and maintenance damage, such as this covered walkway at a public high school, as well as dorm rooms and stairwells. The Ranger is UL/CUL Damp Location Listed (wall and ceiling mount), and is available in a Wet Location Listed version for covered ceiling applications. One Year Guarantee Kenall will replace the Ranger lens if rendered inoperable due to rough handling or accidental abuse for one year from the original installation. 9
10 ENVIROSEAL performance listings and APPLICATIONS SERIES performance listings & applications SIZES environmental 3" 5" 8" 12" UL/CUL Wet Location Listed Covered Ceiling Mount UL/CUL Damp Location Listed Horizontal Wall Mount UL/CUL Wet Location Listed Horiz. Wall Mount (option) UL certified Ceiling Mount (option) The ES Series Environmental EnviroSeal is ideally suited for applications where luminaires are subject to continuous physical or environmental abuse. APPLICATIONS: Commercial, institutional, and academic areas, including exteriors, entryways, corridors, stairwells, rest rooms, and parking structures. HAZARDOUS 3" 5" 8" 12" UL/CUL Wet Location Listed Covered Ceiling Mount UL/CUL Damp Location Listed Horizontal Wall Mount UL/CUL Wet Location Listed Horiz. Wall Mount (option) UL certified Ceiling Mount (option) Haz Loc Class 1, Division 2, Groups A, B, C, D The HES Series Hazardous EnviroSeal is the perfect choice for industrial and scientific facilities where stored or transferred materials and substances could pose a threat of explosion if leaked or spilled. APPLICATIONS: Hazardous material storage facilities. FOOD PROCESSING 3" 5" 8" 12" UL/CUL Wet Location Listed Covered Ceiling Mount UL/CUL Damp Location Listed Horizontal Wall Mount UL/CUL Wet Location Listed Horiz. Wall Mount (option) NSF2 Splash Zone UL certified Ceiling Mount (option) The FES Series Food Processing EnviroSeal was designed for areas that require the luminaires to resist contamination, be easily cleaned, contain no toxic materials, and resist corrosion. APPLICATIONS: Commercial and industrial food processing, handling, preparation and service areas, vivariums, and biosafety labs. TRANSPORTATION 5" 8" UL/CUL Wet Location Listed Covered Ceiling or Horizontal Wall Mount UL certified Ceiling Mount The TES Series Luxtran Transportation EnviroSeal is ideally suited for applications where dirt and vibration contribute to continuous physical or environmental abuse. APPLICATIONS: Public transportation areas, including exteriors, entryways, corridors, stairwells, rest rooms, passenger platforms, stairwells, and parking structures. 10
11 OTHER LINEAR WRAPAROUND LUMINAIRES performance listings and APPLICATIONS SERIES performance listings & applications SIZES millenium stretch 8" 12" UL/CUL Wet Location Listed Covered Ceiling Mount UL/CUL Damp Location Listed Corner, Horizontal Wall & Pendant Mount UL certified IP64 Ceiling Mount The ML Series Millenium Stretch is a versatile solution for public applications needing tough, low maintenance luminaires that are architecturally appealing and can be used throughout a facility for a consistent lighting theme. APPLICATIONS: Foyers, entryways, corridors, stairwells, rest rooms, locker and shower rooms, multipurpose rooms, lunchrooms, athletic facilities, natatoriums, and parking structures in academic, commercial, and transportation facilities. nova 5" 10" UL/CUL Wet Location Listed Covered Ceiling Mount UL/CUL Wet Location Listed Wall Mount (N548W/N1048W) The N Series Nova is perfect for facilities which require fully enclosed, injection-molded luminaires that resist vandalism and environmental damage, while maintaining good looks and efficiency for years to come. APPLICATIONS: Public access, commercial, industrial, transportation, and educational facilities in stairwell, corridor, locker room, rest room, parking structure, passenger platform, and dormitory areas. sheriff 5" 8" 12" UL/CUL Wet Location Listed Covered Ceiling Mount UL/CUL Wet Location Listed Wall Mount (SH548W/SH596W) UL/CUL Damp Location Listed Wall Mount The S Series Sheriff is a great solution for applications where a high incidence of accidental, intentional, or environmental abuse is likely on a regular basis. APPLICATIONS: Entryways, stairwells, corridors, locker rooms, multipurpose rooms, athletic facilities, exteriors, and parking structures in institutional, educational facilities, or other high-traffic public areas. ranger 5" 8" 12" UL/CUL Damp Location Listed Wall & Ceiling Mount UL/CUL Wet Location Listed Covered Ceiling Mount (option) The R Series Ranger is a good match in areas where there is occasional physical abuse or damage from handling, and where environmental factors are not as much of an issue. APPLICATIONS: Rest rooms, lunchrooms, libraries, walkways, administrative offices, and corridors in educational facilities, dormitories, and other public buildings. 11
12 EnviroSeal ES3 SERIES Ceiling/Wall Mount/Surface Lamps: T5, T5HO, T8, Biaxial Dimensions Nominal 3" 24", 3" 36", 3" 48", 3" 96" UL IEC Standard Option PROJECT INFORMATION Job Name Fixture Type Catalog Number Approved by SPECIFICATIONS Lens/gasket: UV stabilized, pearlescent or clear polycarbonate or DR acrylic. Smooth exterior, linear prismatic interior. Nominal thickness.125". option provided with linear silicone gasket to seal lens frame to housing. Housing: One-piece 20-gauge CRS with welded ends. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface. Finish: Brushed stainless steel finish (#4B) or white TGIC polyester powder coat 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. Electrical: Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Sockets: Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. Hardware: One Type 302 stainless steel Phillips head fastener secures lens in housing channel. Installation: Two-point mounting required for Peace of Mind Guarantee. Listings/Certifications: UL and CUL listed for Wet Location covered ceiling. UL and CUL listed for Damp Location horizontal wall mount. Optional UL and CUL Listed for Wet Location horizontal wall mount. Optional UL certified in compliance with IEC ceiling mount. DIMENSIONAL DATA Cross Section / Details Mounting Holes 3.0 (78mm) (2).31 Dia. Holes ES324-T ES324-T ES324-TT ES336-T ES336-T ES348-T ES348-T Dia. Wiring Hole NOTE: ES324 Wiring Hole Offset 1 Left of Center Line 4.0 (102mm) 3.0" (78mm) ES324-T ES324-T ES324-TT ES336-T ES336-T ES348-T ES348-T ORDERING INFORMATION Series Length Lamp Qty Lamp Type Ballast Type Ballast Qty Voltage Housing Opt Lens Type Options Accessory ES3 1 Nominal Length 24 2' 36 3' 48 4' 96 8' (tandem) Lamp Qty (Cross Section) 1 One Lamp Lamp Type Two Foot Lengths 14* F14T5 24* F24T5HO 17* F17T8 40B* F40TT Three Foot Lengths 21* F21T5 39* F39T5HO 25 F25T8 Four Foot Lengths 28 F28T5 32 F32T8 54 F54T5HO Ballast Type IS Elec <10% THD Instant Start (T8) RS Elec <10% THD Rapid Start (T5, T5HO, T8, CFL) LE Electronic LED SB Specified Ballast Ballast Qty 1 One T Tandem Wiring (Consult factory) Voltage DV 120/277 Volts Volt Housing Options P2C 20 Ga CRS; Painted P204S 20 Ga 304SS; Painted B204S 20 Ga 304SS; Brushed P216S 20 Ga 316SS; Painted B216S 20 Ga 316SS; Brushed Lens Type PP t Pearlescent Polycarbonate CP t Clear Polycarbonate AP Pearlescent DR Acrylic AC Clear DR Acrylic Options EL Standard Lumen EL Pack (450 lumens) PEL High Lumen EL Pack (1100 lumens) SEL Specified EL Pack FS Single Fuse & Holder (n/a with 347V) KO.875" Knockout provided for Continuous Row Mount locknut assembly by others (n/a w/ option) HC Hub Connector PM Pendant Mount (damp only) suspension hardware by others (must be installed in accordance with all local codes) UL certified Ceiling Mount (w/removable endcaps not suitable for continuous row mount) WW UL/CUL Wet Location Listing Horizontal Wall Mount (w/removable endcaps not suitable for continuous row mount) Accessory TR t Tamper Resistant POSIGRIP Fastener (1) * Not available with EL Option Not available with 2' fixtures t ES
13 EnviroSeal ES5 SERIES Ceiling/Wall Mount/Surface Lamps: T5, T5HO, T8 Dimensions Nominal 5" 24", 5" 36", 5" 48", 5" 96" UL IEC Standard Option PROJECT INFORMATION Job Name Fixture Type Catalog Number Approved by SPECIFICATIONS Lens/gasket: UV stabilized, pearlescent or clear polycarbonate or DR acrylic. Smooth exterior, linear prismatic interior. Nominal thickness.125". option provided with linear silicone gasket to seal lens frame to housing. Housing: One-piece 20-gauge CRS with welded ends. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface. Finish: Brushed stainless steel finish (#4B) or white TGIC polyester powder coat 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. Electrical: Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Sockets: Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. Hardware: One Type 302 stainless steel Phillips head fastener secures lens in housing channel. Installation: Four-point mounting required for Peace of Mind Guarantee. Listings/Certifications: UL and CUL listed for Wet Location covered ceiling. UL and CUL listed for Damp Location horizontal wall mount. Optional UL and CUL Listed for Wet Location horizontal wall mount. Optional UL certified in compliance with IEC ceiling mount. DIMENSIONAL DATA Cross Section / Details Mounting Holes ES524-T5/T8-16 ES536-T5/T8-20 ES548-T5/T " (141mm) (4).31 Dia. Holes 2.00 Dia. Wiring Hole 5.6 (142mm) 3.0 (76mm) ES524-T ES524-T ES536-T ES536-T ES548-T ES548-T ORDERING INFORMATION Series Length Lamp Qty Lamp Type Ballast Type Ballast Qty Voltage Housing Opt Lens Type Options Accessory ES5 Nominal Length 24 2' 36 3' 48 4' 96 8' (tandem) Lamp Qty (Cross Section) 1 One Lamp 2 Two Lamps Lamp Type Two Foot Lengths 14* F14T5 17 F17T8 31U F31T8-1.62" U Three Foot Lengths 21* F21T5 25 F25T8 Four Foot Lengths 28* F28T5 32 F32T8 54* F54T5HO Ballast Type IS Elec <10% THD Instant Start (T8) RS Elec <10% THD Rapid Start (T5, T5HO, T8) LE Electronic LED SB Specified Ballast Ballast Qty 1 One 2 Two T Tandem Wiring (Consult factory) Voltage DV 120/277 Volts Volt Housing Options P2C 20 Ga CRS; Painted P204S 20 Ga 304SS; Painted B204S 20 Ga 304SS; Brushed P216S 20 Ga 316SS; Painted B216S 20 Ga 316SS; Brushed Lens Type PP t Pearlescent Polycarbonate CP t Clear Polycarbonate AP Pearlescent DR Acrylic AC Clear DR Acrylic Options EL Standard Lumen EL Pack (450 lumens) PEL High Lumen EL Pack (1100 lumens) SEL Specified EL Pack FS Single Fuse & Holder TN 13 Watt Twin Tube NPF Night Light KO.875" Knockout provided for Continuous Row Mount locknut assembly by others (n/a w/ option) HC Hub Connector PM Pendant Mount (damp only) suspension hardware by others (must be installed in accordance with all local codes) UL certified (w/removable endcaps not suitable for continuous row mount) WW UL/CUL Wet Location Listing Horizontal Wall Mount (w/removable endcaps not suitable for continuous row mount) Accessory TR t Tamper Resistant POSIGRIP Fastener (1) * Not available with EL Option Not available on 2' fixtures. t ES
14 EnviroSeal ES8 SERIES Ceiling mount/surface Lamps: T5, T5HO, T8 Dimensions Nominal 8" 24", 8" 36", 8" 48", 8" 96" UL IEC Standard Option PROJECT INFORMATION Job Name Fixture Type Catalog Number Approved by SPECIFICATIONS Lens/gasket: UV stabilized, pearlescent or clear polycarbonate or DR acrylic. Smooth exterior, linear prismatic interior. Nominal thickness.125". option provided with linear silicone gasket to seal lens frame to housing. Housing: One-piece 20-gauge CRS with welded ends. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface. Finish: Brushed stainless steel finish (#4B) or white TGIC polyester powder coat 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%.Electrical: Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Sockets: Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. Hardware: Two Type 302 stainless steel Phillips head fasteners secure lens in housing channel. Installation: Four-point mounting required for Peace of Mind Guarantee. Listings/Certifications: UL and CUL listed for Wet Location covered ceiling. UL and CUL listed for Damp Location horizontal wall mount. Optional UL certified in compliance with IEC ceiling mount. DIMENSIONAL DATA Cross Section / Details Mounting Holes ES824-T5/T8-16 ES836-T5/T8-20 ES848-T5/T (203mm) (4).31 Dia. Holes 2.00 Dia. Wiring Hole 3.0 (77mm) 5.0" (127mm) ES824-T ES848-T ES824-T ES848-T ES836-T ES836-T ORDERING INFORMATION Series Length Lamp Qty Lamp Type Ballast Type Ballast Qty Voltage Housing Opt Lens Type Options Accessory ES8 2 Nominal Length 24 2' 36 3' 48 4' 96 8' (tandem) Lamp Qty (Cross Section) 2 Two Lamps Lamp Type Two Foot Lengths 14* F14T5 17 F17T8 Three Foot Lengths 21* F21T5 25 F25T8 Four Foot Lengths 28 F28T5 32 F32T8 54* F54T5HO Ballast Type IS Elec <10% THD Instant Start (T8) RS Elec <10% THD Rapid Start (T5, T5HO, T8, CFL) LE Electronic LED SB Specified Ballast Ballast Qty 1 One 2 Two T Tandem Wiring (Consult factory) Voltage DV 120/277 Volts Volt Housing Options P2C 20 Ga CRS; Painted P204S 20 Ga 304SS; Painted B204S 20 Ga 304SS; Brushed P216S 20 Ga 316SS; Painted B216S 20 Ga 316SS; Brushed Lens Type PP t Pearlescent Polycarbonate CP t Clear Polycarbonate AP Pearlescent DR Acrylic AC Clear DR Acrylic Options EL Standard Lumen EL Pack (450 lumens) PEL High Lumen EL Pack (1100 lumens) SEL Specified EL Pack FS Single Fuse & Holder TN 13 Watt Twin Tube NPF Night Light KO.875" Knockout provided for Continuous Row Mount locknut assembly by others (n/a w/ option) HC Hub Connector UL certified Ceiling Mount (w/removable endcaps not suitable for continuous row mount) Accessory TR t Tamper Resistant POSIGRIP Fastener (1) * Not available with EL Option Not available on 2' fixtures. t ES
15 EnviroSeal ES12 SERIES Ceiling mount/surface Lamps: T5, T5HO, T8, Biaxial, T8HO Dimensions Nominal 12" 24", 12" 36", 12" 48", 12" 72", 12" x 96" UL IEC Standard Option PROJECT INFORMATION Job Name Fixture Type Catalog Number Approved by SPECIFICATIONS Lens/gasket: UV stabilized, pearlescent or clear polycarbonate or DR acrylic. Smooth exterior, linear prismatic interior. Nominal thickness.125". option provided with linear silicone gasket to seal lens frame to housing. Housing: One-piece 20-gauge CRS with welded ends. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface. Finish: Brushed stainless steel finish (#4B) or white TGIC polyester powder coat 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. Electrical: Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Sockets: Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. Hardware: Two Type 302 stainless steel Phillips head fasteners secure lens in housing channel. Installation: Four-point mounting required for Peace of Mind Guarantee. Listings/Certifications: UL and CUL listed for Wet Location covered ceiling. UL and CUL listed for Damp Location horizontal wall mount. Optional UL certified in compliance with IEC ceiling mount. DIMENSIONAL DATA Cross Section / Details 12.0 (305mm) mounting Holes ES1224-T5/T8-16 ES1224-TT - 16 ES1236-T5/T8-20 ES1248-T5/T8-32 ES1272-T5/T8-56 (4).31 Dia. Holes 2.00 Dia. Wiring Hole 4.5 (115mm) 9.0 (229mm) ES1224-T ES1224-T ES1224-TT ES1236-T ES1236-T ES1248-T ES1248-T ES1272-T ORDERING INFORMATION Series Length Lamp Qty Lamp Type Ballast Type Ballast Qty Voltage Housing Opt Lens Type Options Accessory ES12 Nominal Length 24 2' 36 3' 48 4' 72 6' 96 8' (tandem) Lamp Qty (Cross Section) 2 Two Lamps 3 Three Lamps 4 Four Lamps Lamp Type Two Foot Lengths 14 F14T5 24 F24T5HO 17 F17T8 40B F40TT (2) Three Foot Lengths 21 F21T5 39 F39T5HO 25 F25T8 Four Foot Lengths 28 F28T5 32 F32T8 54 F54T5HO Six Foot Lengths 72 F72T8HO (2) Ballast Type IS Elec <10% THD Instant Start (T8) RS Elec <10% THD Rapid Start (T5, T5HO, T8, T8HO, CFL) LE Electronic LED SB Specified Ballast Ballast Qty 1 One 2 Two T Tandem Wiring (Consult factory) Voltage DV 120/277 Volts Volt Housing Options P2C 20 Ga CRS; Painted P204S 20 Ga 304SS; Painted B204S 20 Ga 304SS; Brushed P216S 20 Ga 316SS; Painted B216S 20 Ga 316SS; Brushed Lens Type PP t Pearlescent Polycarbonate CP t Clear Polycarbonate AP Pearlescent DR Acrylic AC Clear DR Acrylic Options EL Standard Lumen EL Pack (450 lumens) PEL High Lumen EL Pack (1100 lumens) SEL Specified EL Pack FS Single Fuse & Holder TN 13 Watt Twin Tube NPF Night Light KO HC.875" Knockout provided for Continuous Row Mount locknut assembly by others (n/a w/ option) Hub Connector UL certified Ceiling Mount (w/removable endcaps not suitable for continuous row mount) Accessory TR t Tamper Resistant POSIGRIP Fastener (1) EL Option two lamp only Not available on 2' fixtures. t ES
16 EnviroSeal FES3 SERIES for food processing applications Ceiling/Wall Mount/Surface Lamps: T5, T5HO, T8, Biaxial Dimensions Nominal 3" 24", 3" 36", 3" 48", 3" 96" NSF2 Splash Zone UL IEC Standard Option PROJECT INFORMATION Job Name Fixture Type Catalog Number Approved by SPECIFICATIONS Lens/gasket: UV stabilized, pearlescent or clear polycarbonate or DR acrylic. Smooth exterior, linear prismatic interior. Nominal thickness.125". Linear silicone gasket to seal lens frame to housing. Housing: One-piece 20-gauge CRS with welded ends. Base provided with two-point mounting holes and one wireway hole. White TGIC polyester powder coat 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens is positioned in baseplate channels and retained with stainless steel fastener. Base mounts flush to ceiling or wall surface. Electrical: Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Sockets: Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. Hardware: One Type 302 stainless steel Phillips head fastener secures lens in housing channel. Installation: Two-point mounting required for Peace of Mind Guarantee. Listings/Certifications: UL and CUL listed for Wet Location covered ceiling. UL and CUL listed for Damp Location horizontal wall mount. NSF2 Splash Zone. Optional UL and CUL Listed for Wet Location horizontal wall mount. Optional UL certified in compliance with IEC ceiling mount. DIMENSIONAL DATA Cross Section / Details Mounting Holes 3.0 (78mm) (2).31 Dia. Holes ES324-T ES324-T ES324-TT ES336-T ES336-T ES348-T ES348-T Dia. Wiring Hole NOTE: ES324 Wiring Hole Offset 1 Left of Center Line 4.0 (102mm) 3.0" (78mm) ES324-T ES324-T ES324-TT ES336-T ES336-T ES348-T ES348-T ORDERING INFORMATION Series Length Lamp Qty Lamp Type Ballast Type Ballast Qty Voltage Housing Opt Lens Type Options Accessory FES3 1 Nominal Length 24 2' 36 3' 48 4' 96 8' (tandem) Lamp Qty (Cross Section) 1 One Lamp Lamp Type Two Foot Lengths 14* F14T5 24* F24T5HO 17* F17T8 40B* F40TT Three Foot Lengths 21* F21T5 39* F39T5HO 25 F25T8 Four Foot Lengths 28 F28T5 32 F32T8 54 F54T5HO Ballast Type IS Elec <10% THD Instant Start (T8) RS Elec <10% THD Rapid Start (T5, T5HO, T8, CFL) LE Electronic LED SB Specified Ballast Ballast Qty 1 One T Tandem Wiring (Consult factory) Voltage DV 120/277 Volts Volt Housing Options P2C 20 Ga CRS; Painted P204S 20 Ga 304SS; Painted B204S 20 Ga 304SS; Brushed P216S 20 Ga 316SS; Painted B216S 20 Ga 316SS; Brushed Lens Type PP t Pearlescent Polycarbonate CP t Clear Polycarbonate AP Pearlescent DR Acrylic AC Clear DR Acrylic Options EL Standard Lumen EL Pack (450 lumens) PEL High Lumen EL Pack (1100 lumens) SEL Specified EL Pack FS Single Fuse & Holder (n/a with 347V) HC Hub Connector PM Pendant Mount (damp only) suspension hardware by others (must be installed in accordance with all local codes) UL certified Ceiling Mount (w/removable endcaps not suitable for continuous row mount) WW UL/CUL Wet Location Listing Horizontal Wall Mount (w/removable endcaps not suitable for continuous row mount) Accessory TR t Tamper Resistant POSIGRIP Fastener (1) * Not available with EL Option Not available on 2' fixtures. t FES
17 EnviroSeal FES5 SERIES for food processing applications Ceiling/Wall Mount/Surface Lamps: T5, T5HO, T8 Dimensions Nominal 5" 24", 5" 36", 5" 48", 5" 96" NSF2 Splash Zone UL IEC Standard Option PROJECT INFORMATION Job Name Fixture Type Catalog Number Approved by SPECIFICATIONS Lens/gasket: UV stabilized, pearlescent or clear polycarbonate or DR acrylic. Smooth exterior, linear prismatic interior. Nominal thickness.125". Linear silicone gasket to seal lens frame to housing. Housing: One-piece 20-gauge CRS with welded ends. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface. Finish: Brushed stainless steel finish (#4B) or white TGIC polyester powder coat 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. Electrical: Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Sockets: Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. Hardware: One Type 302 stainless steel Phillips head fastener secures lens in housing channel. Installation: Four-point mounting required for Peace of Mind Guarantee. Listings/Certifications: UL and CUL listed for Wet Location covered ceiling. UL and CUL listed for Damp Location horizontal wall mount. NSF2 Splash Zone. Optional UL and CUL Listed for Wet Location horizontal wall mount. Optional UL certified in compliance with IEC ceiling mount. DIMENSIONAL DATA Cross Section / Details Mounting Holes ES524-T5/T8-16 ES536-T5/T8-20 ES548-T5/T " (141mm) (4).31 Dia. Holes 2.00 Dia. Wiring Hole 5.6 (142mm) 3.0 (76mm) ES524-T ES524-T ES536-T ES536-T ES548-T ES548-T ORDERING INFORMATION Series Length Lamp Qty Lamp Type Ballast Type Ballast Qty Voltage Housing Opt Lens Type Options Accessory FES5 Nominal Length 24 2' 36 3' 48 4' 96 8' (tandem) Lamp Qty (Cross Section) 1 One Lamp 2 Two Lamps Lamp Type Two Foot Lengths 14* F14T5 17 F17T8 31U F31T8-1.62" U Three Foot Lengths 21* F21T5 25 F25T8 Four Foot Lengths 28* F28T5 32 F32T8 54* F54T5HO Ballast Type IS Elec <10% THD Instant Start (T8) RS Elec <10% THD Rapid Start (T5, T5HO, T8) LE Electronic LED SB Specified Ballast Ballast Qty 1 One 2 Two T Tandem Wiring (Consult factory) Voltage DV 120/277 Volts Volt Housing Options P2C 20 Ga CRS; Painted P204S 20 Ga 304SS; Painted B204S 20 Ga 304SS; Brushed P216S 20 Ga 316SS; Painted B216S 20 Ga 316SS; Brushed Lens Type PP t Pearlescent Polycarbonate CP t Clear Polycarbonate AP Pearlescent DR Acrylic AC Clear DR Acrylic Options EL Standard Lumen EL Pack (450 lumens) PEL High Lumen EL Pack (1100 lumens) SEL Specified EL Pack FS Single Fuse & Holder TN 13 Watt Twin Tube NPF Night Light HC Hub Connector PM Pendant Mount (damp only) suspension hardware by others (must be installed in accordance with all local codes) UL certified Ceiling Mount (w/removable endcaps not suitable for continuous row mount) WW UL/CUL Wet Location Listing Horizontal Wall Mount (w/removable endcaps not suitable for continuous row mount) Accessory TR t Tamper Resistant POSIGRIP Fastener (1) * Not available with EL Option Not available on 2' fixtures. t FES
18 EnviroSeal FES8 SERIES for food processing applications Ceiling mount/surface Lamps: T5, T5HO, T8 Dimensions Nominal 8" 24", 8" 36", 8" 48", 8" 96" NSF2 Splash Zone UL IEC Standard Option PROJECT INFORMATION Job Name Fixture Type Catalog Number Approved by SPECIFICATIONS Lens/gasket: UV stabilized, pearlescent or clear polycarbonate or DR acrylic. Smooth exterior, linear prismatic interior. Nominal thickness.125". Linear silicone gasket to seal lens frame to housing. Housing: One-piece 20-gauge CRS with welded ends. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface. Finish: Brushed stainless steel finish (#4B) or white TGIC polyester powder coat 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. Electrical: Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Sockets: Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. Hardware: Two Type 302 stainless steel Phillips head fasteners secure lens in housing channel. Installation: Four-point mounting required for Peace of Mind Guarantee. Listings/Certifications: UL and CUL listed for Wet Location covered ceiling. UL and CUL listed for Damp Location horizontal wall mount. NSF2 Splash Zone. Optional UL certified in compliance with IEC ceiling mount. DIMENSIONAL DATA Cross Section / Details Mounting Holes ES824-T5/T8-16 ES836-T5/T8-20 ES848-T5/T (203mm) (4).31 Dia. Holes 2.00 Dia. Wiring Hole 3.0 (77mm) 5.0" (127mm) ES824-T ES848-T ES824-T ES848-T ES836-T ES836-T ORDERING INFORMATION Series Length Lamp Qty Lamp Type Ballast Type Ballast Qty Voltage Housing Opt Lens Type Options Accessory FES8 2 Nominal Length 24 2' 36 3' 48 4' 96 8' (tandem) Lamp Qty (Cross Section) 2 Two Lamps Lamp Type Two Foot Lengths 14* F14T5 17 F17T8 Three Foot Lengths 21* F21T5 25 F25T8 Four Foot Lengths 28 F28T5 32 F32T8 54* F54T5HO Ballast Type IS Elec <10% THD Instant Start (T8) RS Elec <10% THD Rapid Start (T5, T5HO, T8, CFL) LE Electronic LED SB Specified Ballast Ballast Qty 1 One 2 Two T Tandem Wiring (Consult factory) Voltage DV 120/277 Volts Volt Housing Options P2C 20 Ga CRS; Painted P204S 20 Ga 304SS; Painted B204S 20 Ga 304SS; Brushed P216S 20 Ga 316SS; Painted B216S 20 Ga 316SS; Brushed Lens Type PP t Pearlescent Polycarbonate CP t Clear Polycarbonate AP Pearlescent DR Acrylic AC Clear DR Acrylic Options EL Standard Lumen EL Pack (450 lumens) PEL High Lumen EL Pack (1100 lumens) SEL Specified EL Pack FS Single Fuse & Holder TN 13 Watt Twin Tube NPF Night Light HC Hub Connector UL certified Ceiling Mount (w/removable endcaps not suitable for continuous row mount) Accessory TR t Tamper Resistant POSIGRIP Fastener (1) * Not available with EL Option Not available on 2' fixtures. t FES
19 EnviroSeal FES12 SERIES for food processing applications Ceiling mount/surface Lamps: T5, T5HO, T8, Biaxial, T8HO Dimensions Nominal 12" 24", 12" 36", 12" 48", 12" 72", 12" x 96" NSF2 Splash Zone UL IEC Standard Option PROJECT INFORMATION Job Name Fixture Type Catalog Number Approved by SPECIFICATIONS Lens/gasket: UV stabilized, pearlescent or clear polycarbonate or DR acrylic. Smooth exterior, linear prismatic interior. Nominal thickness.125". Linear silicone gasket to seal lens frame to housing. Housing: One-piece 20-gauge CRS with welded ends. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface. Finish: Brushed stainless steel finish (#4B) or white TGIC polyester powder coat 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. Electrical: Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Sockets: Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. Hardware: Two Type 302 stainless steel Phillips head fasteners secure lens in housing channel. Installation: Four-point mounting required for Peace of Mind Guarantee. Listings/Certifications: UL and CUL listed for Wet Location covered ceiling. UL and CUL listed for Damp Location horizontal wall mount. NSF2 Splash Zone. Optional UL certified in compliance with IEC ceiling mount. DIMENSIONAL DATA Cross Section / Details 12.0 (305mm) mounting Holes ES1224-T5/T8-16 ES1224-TT - 16 ES1236-T5/T8-20 ES1248-T5/T8-32 ES1272-T5/T8-56 (4).31 Dia. Holes 2.00 Dia. Wiring Hole 4.5 (115mm) 9.0 (229mm) ORDERING INFORMATION Series Length Lamp Qty Lamp Type Ballast Type Ballast Qty Voltage Housing Opt Lens Type Options Accessory FES12 Nominal Length 24 2' 36 3' 48 4' 72 6' 96 8' (tandem) Lamp Qty (Cross Section) 2 Two Lamps 3 Three Lamps 4 Four Lamps Lamp Type Two Foot Lengths 14 F14T5 24 F24T5HO 17 F17T8 40B F40TT (2) Three Foot Lengths 21 F21T5 39 F39T5HO 25 F25T8 Four Foot Lengths 28 F28T5 32 F32T8 54 F54T5HO Six Foot Lengths 72 F72T8HO (2) Ballast Type IS Elec <10% THD Instant Start (T8) RS Elec <10% THD Rapid Start (T5, T5HO, T8, T8HO, CFL) LE Electronic LED SB Specified Ballast Ballast Qty 1 One 2 Two T Tandem Wiring (Consult factory) Voltage DV 120/277 Volts Volt ES1224-T ES1224-T ES1224-TT ES1236-T ES1236-T Housing Options P2C 20 Ga CRS; Painted P204S 20 Ga 304SS; Painted B204S 20 Ga 304SS; Brushed P216S 20 Ga 316SS; Painted B216S 20 Ga 316SS; Brushed Lens Type PP t Pearlescent Polycarbonate CP t Clear Polycarbonate AP Pearlescent DR Acrylic AC Clear DR Acrylic ES1248-T ES1248-T ES1272-T Options EL Standard Lumen EL Pack (450 lumens) PEL High Lumen EL Pack (1100 lumens) SEL Specified EL Pack FS Single Fuse & Holder TN 13 Watt Twin Tube NPF Night Light HC Hub Connector UL certified Ceiling Mount (w/removable endcaps not suitable for continuous row mount) Accessory TR t Tamper Resistant POSIGRIP Fastener (1) EL Option two lamp only Not available on 2' fixtures. t FES
20 EnviroSeal HES3 SERIES FOR HAZARDOUS LOCATIONS Ceiling/Wall Mount/Surface Lamps: T8 Dimensions Nominal 3" 24", 3" x 36", 3" 48" HAZ UL IEC Standard Option PROJECT INFORMATION Job Name Fixture Type Catalog Number Approved by SPECIFICATIONS Lens/gasket: UV stabilized polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness.125". option provided with linear silicone gasket to seal lens frame to housing. Housing: One-piece 20-gauge CRS with welded ends. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface. Finish: Brushed stainless steel finish (#4B) or white TGIC polyester powder coat 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. Electrical: Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Sockets: Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. Hardware: One Type 302 stainless steel Phillips head fastener secures lens in housing channel. Installation: Two-point mounting required for Peace of Mind Guarantee. Listings/Certifications: UL and CUL listed for Wet Location covered ceiling. UL and CUL listed for Damp Location horizontal wall mount. Standard Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D. Optional UL and CUL Listed for Wet Location horizontal wall mount. Optional UL certified in compliance with IEC ceiling mount. DIMENSIONAL DATA Cross Section / Details mounting Holes 4.0 (102mm) 3.0 (78mm).875 Dia. Wiring Hole (Left End) 0.9" (23mm) 3.0" (78mm) (2).31 Dia. Holes HES324-T HES336-T HES348-T HES324-T HES336-T HES348-T ORDERING INFORMATION Series Length Lamp Qty Lamp Type Ballast Type Ballast Qty Voltage Housing Opt Lens Type Options Accessory HES3 1 Nominal Length 24 2' 36 3' 48 4' 96 8' (tandem) Lamp Qty 1 One Lamp Lamp Type Two Foot Lengths 17 F17T8 Three Foot Lengths 25 F25T8 Four Foot Lengths 32 F32T8 Ballast Type IS Elec <10% THD Instant Start RS Elec <10% THD Rapid Start LE Electronic LED SB Specified Ballast Ballast Qty 1 One Voltage DV 120/277 Volts Volt Housing Options P2C 20 Ga CRS; Painted P204S 20 Ga 304SS; Painted B204S 20 Ga 304SS; Brushed P216S 20 Ga 316SS; Painted B216S 20 Ga 316SS; Brushed Lens Type PP t Pearlescent Polycarbonate CP t Clear Polycarbonate AP Pearlescent DR Acrylic AC Clear DR Acrylic Options EL Standard Lumen EL Pack, 25 C Ambient (450 lumens) FS Single Fuse & Holder (n/a with 347V) HC Hub Connector UL certified Ceiling Mount (w/removable endcaps not suitable for continuous row mount) WW UL/CUL Wet Location Listing Horizontal Wall Mount (w/removable endcaps not suitable for continuous row mount) PM Pendant Mount (damp only) suspension hardware by others (must be installed in accordance with all local codes) Accessory TR t Tamper Resistant POSIGRIP Fastener (1) Not available on 2' fixtures. t HES
21 EnviroSeal HES5 SERIES FOR HAZARDOUS LOCATIONS Ceiling/Wall Mount/Surface Lamps: T8 Dimensions Nominal 5" 24", 5" 36", 5" 48" HAZ UL IEC Standard Option PROJECT INFORMATION Job Name Fixture Type Catalog Number Approved by SPECIFICATIONS Lens/gasket: UV stabilized polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness.125". option provided with linear silicone gasket to seal lens frame to housing. Housing: One-piece 20-gauge CRS with welded ends. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface. Finish: Brushed stainless steel finish (#4B) or white TGIC polyester powder coat 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. Electrical: Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Sockets: Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. Hardware: One Type 302 stainless steel Phillips head fastener secures lens in housing channel. Installation: Four-point mounting required for Peace of Mind Guarantee. Listings/Certifications: UL and CUL listed for Wet Location covered ceiling. UL and CUL listed for Damp Location horizontal wall mount. Standard Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D. Optional UL and CUL Listed for Wet Location horizontal wall mount. Optional UL certified in compliance with IEC ceiling mount. DIMENSIONAL DATA Cross Section / Details Mounting Holes 5.6 (142mm) 5.5" (141mm).875 Dia. Wiring Hole (Left End) 0.9 (23mm) 3.0 (76mm) (4).31 Dia. Holes HES524-T8-16 HES536-T8-20 HES548-T8-32 HES524-T HES536-T HES548-T ORDERING INFORMATION Series Length Lamp Qty Lamp Type Ballast Type Ballast Qty Voltage Housing Opt Lens Type Options Accessory HES5 Nominal Length 24 2' 36 3' 48 4' 96 8' (tandem) Lamp Qty 1 One Lamp 2 Two Lamps Lamp Type Two Foot Lengths 17 F17T8 31U F31T8-1.62"U (one lamp only) Three Foot Lengths 25 F25T8 Four Foot Lengths 32 F32T8 Ballast Type IS Elec <10% THD Instant Start RS Elec <10% THD Rapid Start LE Electronic LED SB Specified Ballast Ballast Qty 1 One 2 Two Voltage DV 120/277 Volts Volt Housing Options P2C 20 Ga CRS; Painted P204S 20 Ga 304SS; Painted B204S 20 Ga 304SS; Brushed P216S 20 Ga 316SS; Painted B216S 20 Ga 316SS; Brushed Lens Type PP t Pearlescent Polycarbonate CP t Clear Polycarbonate AP Pearlescent DR Acrylic AC Clear DR Acrylic Options EL Standard Lumen EL Pack, 25 C Ambient (450 lumens) FS Single Fuse & Holder (n/a with 347V) TN 13 Watt Twin Tube NPF Night Light HC Hub Connector UL certified Ceiling Mount (w/removable endcaps not suitable for continuous row mount) WW UL/CUL Wet Location Listing Horizontal Wall Mount (w/removable endcaps not suitable for continuous row mount) PM Pendant Mount (damp only) suspension hardware by others (must be installed in accordance with all local codes) Accessory TR t Tamper Resistant POSIGRIP Fastener (1) t HES
millenium StretcH Architectural High Abuse and Rough Service Flexible Lighting System Linear Fluorescent Lighting
millenium StretcH Architectural High Abuse and Rough Service Flexible Lighting System Linear Fluorescent Lighting HA 2 Millenium Stretch What's New Millenium Stretch is now available in a new 5"width In
More informationwww.greenelectricalsupply.com Dimensions not to scale 4.4 Width 6.75 ; with latches 7.33 2 ; 27.68 4 ; 51.65 8 ; 100 Lengths, nominal; actual AVAILABLE Simkar is proud to offer fixtures that comply to
More informationApplications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
More informationkenall dark sky luminaires
kenall dark sky luminaires Millenium Finite Wall Mount Millenium Edge Ceiling Mount Herculux Wall and Ceiling Mount Kenall's dark sky solution As more buildings are constructed and equipped with powerful
More informationMHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT
MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting
More informationFV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
More informationMHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent
MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations
More informationMHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations
MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine
More informationVaporproof Strip - 4 Foot 1-3 Lamps
Vaporproof Strip - 4 Foot - 3 Lamps 2.23 Applications Entrance Lighting Car Washes Public Access Parking Structures Certifications 4.3 500 Guardian PSI seal Dimensional Drawings Beverage Industry Food
More informationGATEWAY ARCHITECTURAL LIGHTING APPEARANCE PERFORMANCE ENDURANCE
GATEWAY ARCHITECTURAL LIGHTING APPEARANCE PERFORMANCE ENDURANCE GATEWAY ARCHITECTURAL LIGHTING The Gateway Architectural Lighting Series offers a variety of styles designed to accent architectural settings
More information003 3 foot foot RUN Nominal Length* * For actual lengths see
M125 Project: Type: Qty: Series Lamping Shielding Mounting Nominal Length Finish Voltage Options Series Lamping Shielding Mounting Nominal Length Finish Voltage Options M125 (M125/9 Direct) Multi-Mount
More informationLED LINEAR QUICK SUMMARY CO W SI MODEL CORTANA
LED LINEAR CORTANA This simple and elegant suspended LED linear light with wide optics is ideal for general uniform ambient lighting applications where clean, modern architectural design is required. Use
More informationWFHN LED SERIES W F H N L E D. High-Bay Lighting for Heavy Hose-Down Environments
WFHN LED SERIES High-Bay Lighting for Heavy Hose-Down Environments UL 1589 Wet Locations UL 8750 LED Safety NEMA 4X CUL Listed NSF Certified Food Equipment High Pressure Hose-Down One Piece Welded Aluminum
More informationWFH LED SERIES L E D. High-Bay Lighting for Hazardous & Wet Locations
WFH LED SERIES W FH High-Bay Lighting for Hazardous & Wet Locations Class I, Division 2, Groups A, B, C, & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 1598 Wet Locations
More informationExample: DWAE51L840-4-UNV-MD360W. Lumen Package Color Temp. Length Voltage Driver Options Installed
Industrial Vaporlume DW Project: Location: Cat.No: Type: Lamps: Notes: Qty: 4', wet location, 3500, 4300, 5100 or 7000 lm The Philips Day-Brite / Philips CFI Vaporlume wet location industrial DW is designed
More informationDual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire
Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire For additional configurations see our Product Catalog or visit our website at WINDIRECT TM 3 in1 Dual Lamp Ceramic Metal Halide CMH x 2 1
More informationHP90 Recessed 2'X2' Fluorescent; T8, T5, T5HO or TT5
Page 1 of 5 Emergency Pack 1 5" (127mm) 24" (610mm) 2-1/2" (64mm) 2" X 2-1/2" Wiring access plate with (2) 7/8" dia. K.O.'s Ordering Information HP90 H9 Direct/Indirect Recessed Fluorescent Body Style
More informationClass 1 Division 2 Hazardous Location LED Light - Corrosion Resistant for Marine (Saltwater) - Offsh
Class 1 Division 2 Hazardous Location LED Light - Corrosion Resistant for Marine (Saltwater) - Offsh Part #: HALP-48-2L-LED Page: 1 Made in the USA The Larson Electronics HALP-48-2L-LED Hazardous Area
More informationLow brightness and uplighting combine to create a pleasing visual environment. Softbay Series
Low brightness and uplighting combine to create a pleasing visual environment Softbay Series Keene MAKES LIGHT WORK Softbay is a durable performer in light-to-moderate industrial environments and an enduring
More informationChamp MLL LED luminaires
The Champ MLL linear LED is specifically designed to replace fluorescent T12, T8 and T5HO lighting in harsh and hazardous applications. The rugged and durable design features the industry s most versatile
More informationNMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and s NEMA 4X UL 1598 Wet & s CUL IP65 NSF Enclosure N M F 2 339 NMF2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent
More informationHW, WA, WRSN and WRSM Series
Miro 4 Enhanced Aluminum Reflector HW, WA, WRSN and WRSM Series A choice of proven Holophane wraps provide a clean, linear appearance of light with control, comfort and architectural richness. The highly
More informationModel Size # Lamps Lamp Type Voltage Options RDI-C 2X MV. T5 Lamps 14= F14T5 24 = F24T5HO. T8 Lamps 17 = F17T8
RDI-C 2x2 Series Center Basket Application: This attractive 2 x2 Direct/Indirect Center Basket Troffer Unit combines the energy efficient performances of electronic ballast with soft low-glare contemporary
More informationRSS SERIES R S S. Fluorescent Lighting for Hazardous Locations
RSS SERIES Fluorescent Lighting for Hazardous Locations R S S Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Location UL 1598A Marine Outside Type CUL Wet Locations IP66 55 Ambient Temperature
More informationAPPLICATIONS APPROVALS. GASKET One piece neoprene. LATCHES Plated steel twist draw. ENTRIES 1 2 NPT feed-through outlets, 3 4 NPT outlets optional.
Haz HazMax Pinnacle/al APPLICATIONS Hazardous locations Watertight requirements Dusttight requirements Oil and gas exploration and production Waste water treatment plants Pipeline compressor / pumping
More informationLinear Fluorescent Highbays. A comprehensive selection of high output commercial/industrial fluorescent lighting
Linear Fluorescent Highbays A comprehensive selection of high output commercial/industrial fluorescent lighting Linear Fluorescent Highbay Lighting T-Series Full Body, Specification Grade Fluorescent Highbay
More informationWALL MOUNT. Notes: Project: Type: PROJECT INFORMATION DIMENSIONS SECTION VIEWS ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 1/16" 78mm 4 102mm 4 102mm 4 3/8 111mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
More informationMEDMASTER DOWNLIGHT Luminaires for Surgical Applications
PRODUCT FEATURES: 6" sealed, recessed downlight with regressed or flush lens trim Conducted emissions controlled as per MIL-STD-461F Delivered lumens: 794-5,543 lm 1% Dimming via 0-10V, DALI or EcoSystem
More informationLED Vapor Tight For Tough Environments
VAPOR TIGHT DURABLE LED Vapor Tight For Tough Environments Universal s EVERLINE Vapor Tight is ideal for unforgiving lighting environments. These durable LED fixtures have a fiber-glass reinforced housing
More informationQty: B B lm/6.9W per foot. per foot. 2B lm/15.3W per foot. 2B lm/13.
Date: Customer: Project: Type: Qty: M125 Order Code: L125 - - - - - - - - - - - - L125 Series L125 M125 Multi-Mount Form Light Engine 1B45 1,2 1116lm/11.9W 1B40 1 1B35 1 1009lm/10.6W 888lm/9.3W 1B30 1
More informationMercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
More informationSeem mm 4.50" 4.00" 101.6mm. Narrow 4" linear fluorescent allows for both individual or continuous runs.
FLUORESCENT recessed companion wall mount companion DIMENSIONAL DATA FEATURES Narrow 4" linear fluorescent allows for both individual or continuous runs. Frosted acrylic flush lens provides even illumination,
More informationSealtight LED Luminaire
CATALOG NO. TYPE NO. JOB NAME ORDERING INFORMATION Catalog Number: Example: SLT434KDRB SLT FAMILY SLT - Sealtight Luminaire ACCESSORIES 23-2300 nominal 35-3500 nominal 43-4300 nominal 51-5100 nominal COLOR
More informationQty: 1B40 1,2 958lm/10.4W per foot 1B B lm/6.8W. per foot. 2B lm/15.4W per foot. 2B lm/10.2W per foot. 2B lm/18.
Date: Customer: Project: Type: Qty: Survivor 9 LED Order Code: SUR9L SUR9L Series Light Engine - - - - - - - - - SUR9L Survivor 9 LED 1B45 1,2, 1060lm/11.7W 2B45 1,2, 2113lm/23.6W 1B40 1,2 958lm/10.4W
More information131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x 48.0L x 4.0Dp (300 x 1220 x 100) LAMP 1 or 2 lamp
More informationPauluhn ZPL explosionproof LED luminaires For drilling and marine applications
Pauluhn ZPL explosionproof linear LEDs are designed to replace fluorescent T12, T8 and T5HO lighting on marine vessels and land-based and offshore drilling platforms. The rugged and durable design features
More informationApplications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
More informationCorrectional Luminaires MightyMac Lighting for Security Detention. Correctional LED Luminaires COR. Designed and manufactured in the USA
orrectional Luminaires MightyMac Lighting for Security Detention orrectional LED Luminaires OR Designed and manufactured in the USA lamshell Housing Styles LED lamshell Housing Features lamshell design
More information131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 131 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x.0l x 4.0Dp (0 x 1220 x 100) LAMP 1 or 2 lamp
More informationINSTALLATION INSTRUCTIONS
MedMaster Auracyl Sconce for MRI Suites MRIMAS813 series Wall Mount Lamps: Incandescent, LED ADA Compliant Non-Ferrous Dimensions Nominal 8" 13" Nominal Luminous Opening 6" x 11" PROJECT INFORMATION Job
More information20W LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - Class 1 Division 2
20W LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - Class 1 Division 2 Part #: HAL-24-16W-LED Page: 1 Buy American Compliant The Larson Electronics HAL-24-16W-LED is a low profile
More informationsecurity ase100 (4ft) series (2' available) SURFACE / corner / wall / ceiling mounted security led luminaire high impact angled security luminaire
security ase100 (4ft) series (2' available) high impact angled security luminaire SURFACE / corner / wall / ceiling mounted security led luminaire dimensions date job www.lalighting.com 626-454-8300 3/8"
More informationInduction Compact Fluorescent HID LPQ. Canopy Luminaire
Induction Compact Fluorescent HID LPQ Canopy Luminaire LPQ Series Lighting For Life Featuring the Philips QL Induction Lighting System 100,000 Hours of Operation Very Low Maintenance Efficient Operation
More informationOptions. Pole and Arm. Suitable for wet locations
Catalog number: / / / Mtg. Fixture Electrical Module Finish See page 2 See page 3 Options Pole and Arm Select pole from Kim Arms and Poles Selection Guide. If pole is provided by others indicate O.D. for
More informationFixture Type: Project Name: Baffle or Diffuser. Lamp Type. BW FP PARSS (1-lamp D only) PBSS XA 6044 (ADW only) see Baffle and Diffusers Options
W-D-66N 1" (25) 6 1/2" (165) Fixture Type: Project Name: Mod 66 W-D-66N, W-ID-66N, W-ADW-66N (chalkboard) Wall-Mounted Product Description Linear modular luminaire which offers a variety of distributions
More informationWALL MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW 9" 229mm 3 3/4" 95mm 4 3/4 121mm 7 1/8 181mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 CENTER OPTICS
More informationHSN, HSM, HIS, IC, TN, CC and IW Series
Miro 4 Enhanced Aluminum Reflector HSN, HSM, HIS, IC, TN, CC and IW Series Holophane offers a variety of industrial luminaires for a wide range of applications from the most demanding specialized industrial
More informationDuraPro Hazardous Area Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine
More informationLighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety
4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4
More informationAUTHENTIC LIFE SAFETY PRODUCTS SINCE 1940
AUTHENTIC LIFE SAFETY PRODUCTS SINCE 1940 NEMA 4X C1D2/C2D1 INDUSTRIAL HIGH LUMEN LED EMERGENCY LIGHT DUAL-LITE.COM INNOVATIVE LED NEMA 4X C1D2/C2D1 Industrial Emergency Light The Dynamo Series offers
More informationPerimaliter Wallpacks
Perimaliter Wallpacks Perimaliter III PVL3 / PGM3 Perimaliter II PGL Solutions for Perimeter/Area Lighting Perimaliter Wallpacks The Perimaliter wallpack has been the design leader in refractor wallpacks
More informationCynergy Series Retrofit Kit
project: fixture type: catalog #: quantity: The Cynergy Series LED Retrofit system has been developed to dramatically improve existing recessed troffer performance using Solid State Lighting (SSL) technologies.
More information1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC
1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC Part #: MHFL-1000W Made in the USA The powerful and efficient MHFL-1000W metal halide light fixture from Larson
More informationTaxonomies, Classifications, and Categories LED FLOODLIGHTS, WALLPACKS, BOLLARDS & LANDSCAPE LIGHTING
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 XT0R5A 50W Led Wallpack Catalog Number Manufacturer Description Weight per unit Product Category Features amperage rating
More informationCode Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
More informationADVANTAGE SERIES Vaportight Fixtures
Short Specification: The Advantage Vaportight fixtures are approved for use in vandalresistant, dust, wet and spray-down locations. This series was designed with electrical distributors for the demands
More informationClass I, Div. II Fluorescent Fixture - Emergency Battery Backup - Corrosion Resistant (Saltwater) -
Class I, Div. II Fluorescent Fixture - Emergency Battery Backup - Corrosion Resistant (Saltwater) - Part #: HALP-EMG-24-2L-BX Made in the USA The Larson Electronics HALP-EMG-24-2L-BX Hazardous Area Fluorescent
More informationFluorescent Lamp Wattages. Fluorescent Optics T5 = F14 (2') F21 (3',6') F28 (4',8') NB Narrow Beam (60 ) WB Wide Beam (100 )
INDOOR R FLUORESCENT INDOOR R FLUORESCENT SMS/SMM MOUNT Prefix Mounting Optics Light Source & Wattage LIN = Linea SMS-U Surface, Uplight, SMM-U Surface, Uplight, Multiple Fixture Run SMS-D Surface, Downlight,
More informationClass I Div 2 LED Pivoting Light - 4 foot 2 lamp - 2nd Gen LED T series Style - Back Mount Swivel
Class I Div 2 LED Pivoting Light - 4 foot 2 lamp - 2nd Gen LED T series Style - Back Mount Swivel Part #: HAL-48-2L-LED-BMSW-G2 Page: 1 Made in the USA The Larson Electronics HAL-48-2L-LED-BMSW-G2 Hazardous
More informationAreamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
More informationHighbay Fluorescent - 3 or 4 Lamp Curved Profile Design
- 3 or 4 Lamp Curved Profile Design Description HFB3 series high-bay fluorescent fixture is a great energy saving alternative to traditional HID highbay fixtures. This fixture operates three or four lamps
More informationCatalog # Project. Comments. Prepared by. 6.4" [163 mm] Lumen Package Nominal per 4 section
DESCRIPTION The RZL is a suspended linear direct and semi-direct LED continuous row solution for new and retrofit construction. Designed for larger open ceiling environments, the RZL offers advanced LED
More informationFCW3043 ADA FCW3045 ADA FCW3042 ADA FCW3040 ADA
FCW3043 2.5 in FCW3045 2.3 in FCW3042 2.3 in FCW3040 2.2 in 120 www.fclighting.com *Consult website for updated specification sheets regarding detailed information and performance. FC Lighting, Inc. 2012.
More informationVSL4 Series. Description. Specifications. 2.13in. 2.03in. 3.50in
Description VSL4 series 4 LED vaporproof strip fixture is gasketed to provide dust and moisture resistant illumination. It withstands corrosion, splashing water, hose-directed water, damage from external
More informationHorizon Patient Bed Light LED and Fluorescent Solutions
Horizon Patient Bed Light LED and Fluorescent Solutions Horizon is the perfect blend of design, performance and durability. An aesthetically-pleasing form that minimizes the visual impact in the space.
More informationDELTA RAIL SYSTEM SYMMETRIC OPTICAL SYSTEM STANDARD SPECIFICATIONS DR 1 320MH-PS. 29,700 36,000 40, , mm 400MH 400MH-PS 1000MH-BT37 DR 2
SPECIFICATIONS DELTA RAIL SYSTEM SYMMETRIC OPTICAL SYSTEM STANDARD Number of Lamps Lamp Type All smaller wattages available Lumen Package Initial lumens, based on published lamp information 004 DR 405mm
More informationHigh-Performance Industrial Emergency LED Lighting LHP & LHPR SERIES
High-Performance Industrial Emergency LED Lighting LHP & LHPR SERIES The LHP Series offers many advantages in an industrial environment LHP SERIES Illuminates wide, open areas such as warehouses, manufacturing
More informationAreamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
More informationLED lighting for drilling & marine Pauluhn ZPL LED luminaires. Pauluhn ZPL. LED luminaires for drilling & marine applications
LED lighting for drilling & marine Pauluhn ZPL LED luminaires Pauluhn ZPL LED luminaires for drilling & marine applications Pauluhn ZPL explosionproof LEDs Safe. Reliable. Efficient. Featuring the industry's
More informationWIDE BODY FLUORESCENT LUMINAIRES
WIDE BODY FLUORESCENT LUMINAIRES Domestically manufactured, our vapor tight Narrow Body Fluorescent Luminaire Series accommodates both T5 and T8 lamps, all rated for long life, energy efficiency, and more
More informationHeavy industrial LED lighting Champ Pro PFM LED luminaires. Champ PFM. LED floodlights for heavy industrial areas. Authorized Distributor
Heavy industrial LED lighting Champ Pro PFM LED luminaires Champ PFM LED floodlights for heavy industrial areas Authorized Distributor Champ Pro PFM LED floodlights Safe. Reliable. Efficient. Featuring
More informationCatalog # Project. Comments. Prepared by. 11" [279mm] 8-3/4" [222mm] ESCUTCHEON PLATES. 2-5/8" [67mm] 3/4" [19mm] Dia. Hole. 3" [77mm] 1-1/2" [39mm]
DESPTION SPECIFICATION FEATURES at The patented Lumark Crosstour MAXX LED Wall Pack Series of luminaries provides low-profile architectural style with super bright, energy-efficient LEDs. The rugged die-cast
More informationRECESSED WALL WASH MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 13/32 4 3/8" 4" IC culus Listed Type I.C. SHOWN WITH LENS OPTION ORDERING CODE 2 15/16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PRODUCT SPECIFICATIONS
More informationRECESSED ASYMMETRIC MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 5" SHOWN WITH LENS OPTION 3 13/32 ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3
More informationLUCEN 2x2 ARCHITECTURAL RECESSED LUMINAIRE
Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 3-3/4 (95.3mm) 23-3/4 (603.3mm) 23-3/4 (603.3mm) Pre-painted formed 22 gauge cold rolled steel housing Highly reflective die-formed white painted
More informationNew Sentry Elite is Packed with Features
New Sentry Elite is Packed with Features Sentry Elite 4 with Parking Garage Lens engineers have focused decades of expertise in vapor tight fixture kits to develop the feature-packed Sentry Elite. It has
More informationseem 4 grid features dimensional data performance
grid seem features Narrow " aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted acrylic flush lens provides even illumination, high performance
More informationNotes: (1) not recommended with staggered lamping (2) Not available with T8 lamping.
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEW 3 5/8" 92mm 2 1/4 57mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH (FT)
More informationSeem 6. Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic.
Seem 6 FLUORESCENT GRID parabolic louver DIMENSIONAL DATA grid 5.53" 14.6mm FEATURES Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted
More informationMAR SERIES Fluorescent Lighting for Hazardous Locations
MAR SERIES M AR Fluorescent Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C, & D Seismic Tested UL 844 Hazardous Locations UL 924 Emergency Lighting UL 1598A Marine Outside Type CSA
More informationMagnaPro Hazardous Area Drop Lens Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine
More informationDESCRIPTION Galleria's beauty and versatility make it an excellent choice for roadway and general area lighting applications. An aesthetic reveal in the formed aluminum housing gives the Galleria a distinctive
More informationOptions AMF Antimicrobial Finish (All Exposed Surfaces) BLK Black Doorframe. Accessory
PROJECT INFORMATION Job Name LightBox CSMRI SERIES PRODUCT FEATURES:»» Recessed ceiling mount grid; 2' 4'»» Non-ferrous construction»» Antimicrobial finish option available»» Expansive offering of high
More information20W LED Strip Light for Hazardous Location - 24" Surface Mount Bar - Motion, Day/Night Sensor - C1D2
20W LED Strip Light for Hazardous Location - 24" Surface Mount Bar - Motion, Day/Night Sensor - C1D2 Part #: HAL-24-16W-LED-DNMS Page: 1 Buy American Compliant The HAL-24-16W-LED-DNMS from Larson Electronics
More informationRecessed. HP90 Fluorescent 1x4
Recessed HP90 Fluorescent 1x4 Project: Location: Cat.No: Type: Lamps: Notes: Qty: The Philips Day-Brite / Philips CFI HP90 Recessed Fluorescent combines a recessed contoured body with an enclosed linear
More informationLighting Systems Argus-7
Page 1 of 5 1 1. (3.5cm) 1.7 (4.3cm) 4 5 Rectilinear 3 1.81 (4.6cm) Extruded Linear Louver.5 (.64cm) 5. (1.7cm) 9. (.86cm) 1 1. (3.5cm) 1.7 (4.3cm) 4 5 Tapered 3 1.81 (4.6cm).75 (.7cm) Feature Specifications
More informationAvenue B. Grid Mount (Regress Trim Shown) Flush Lens. Drywall Flange (Regress Trim Shown) Narrow 3" slot LED with frosted satin lens.
LED corrugated regress trim solid regress trim flush lens DIMENSIONAL DATA Grid Mount (Regress Trim Shown) FEATURES Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid
More informationMercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
ATEX/IECEx: Zone 2 and 22 II 2 GD Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial,
More informationPGL350P W PS Wallpack
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 PGL350P1281 350W PS Wallpack Hubbell Lighting, Inc. Catalog Number Manufacturer Description Weight per unit Product Category
More informationPRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW
Project Type Notes END VIEW 3 7/16" 87mm 3 15/16" 1mm ORDERING GUIDE CONTROL SENSORS S PRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW AIR Wall S satin lens 3 3 T5 T5 1 1 lamp AP
More informationSURFACE TRACK (120/250V) SPECIFICATIONS
SURFACE TRACK (120/250V) SPECIFICATIONS GENERAL Lighting Track shall allow fixtures to be located anywhere along the track length. Fixtures shall be easily focused, switched, dimmed, accessorized and removed
More informationRecessed. HP90 Fluorescent 2x4
Recessed HP90 Fluorescent 2x4 Project: Location: Cat.No: Type: Lamps: Notes: Qty: The Philips Day-Brite / Philips CFI HP90 Recessed Fluorescent combines a recessed contoured body with an enclosed linear
More informationSAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire
SAFR LED SERIES Hazardous Location LED Luminaire Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844
More information14W Linear 2' LED Light Lumens - IP66 - UL 1598A - Stainless Steel Mounting Brackets/Hardware
14W Linear 2' LED Light - 1750 Lumens - IP66 - UL 1598A - Stainless Steel Mounting Brackets/Hardware Part #: WDL-24-1L-SS-2X5FT Page: 1 Made in Texas Providing 1,750 lumens of clean, crisp white light
More informationElectronic Fluorescent Ballasts
Electronic Fluorescent Ballasts A Complete Range of Solutions From The Name You Trust For more than 30 years, the lighting industry has relied on our TRIAD brand for the most specified, most installed,
More informationWASHDOWN SERIES 2 LED MODULES v 1.0 FIXTURE SPECIFICATION SHEET TYPE
WASHDOWN SERIES 2 LED MODULES v 1.0 FIXTURE SPECIFICATION SHEET TYPE WASHDOWN 2M ABOUT THE LUSIO WASHDOWN SERIES The Lusio Commercial and Industrial Washdown Series features LED high bay fixtures for use
More informationNotes: 3 13/32. (5) Please consult factory (6) Available with T8 lamp only
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct Indirect 3 13/32 ORDERING CODE 3 13/32 SHOWN WITH LENS OPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT
More information16 Watt White LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - C1D2
16 Watt White LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - C1D2 Part #: HAL-24-16W-LED-WHT Page: 1 Buy American Compliant The HAL-24-16W-LED-WHT from Larson Electronics is
More informationwww.greenelectricalsupply.com LED Technical Data High efficiency s. Use anywhere you need exceptional light distribution for mounting heights up to 40 feet. LIMITLESS OPTIONS for the following applications:
More informationEMERGENCY. EYE Lighting Volume 6 Catalogue
EMERGENCY EYE Lighting Volume 6 Catalogue A-Line Coulomb Emlux Mini 8 6.1 6.2 6.3 6.4 Samson Twin Spot Volta 6.5 6.6 6.7 A-LINE EMERGENCY The A-Line is a high quality, low maintenance emergency luminaire
More information