COMMENTS: PLEASE SEE A/E COMMENTS.

Transcription

1 OCPS CLAY SPRINGS ES SUBMITTAL DETAILS: SUBJECT: BUILDING REFERENCE: DATE RECIEVED: Oct 23, 2014 DISCIPLINE: Electrical PRIORITY STATUS: 2-STANDARD SPECIFICATION REF: REVIEWER DUE DATE: 11/4/2014 DWG REF. DWG TITLE: RETURNED ITEMS: INTERIOR LIGHTING, LAMPS & BALLASTS NONE NO OF ITEMS: ITEM DESCRIPTI CONTRACTOR/CM: SUBMITTAL TRANSMITTAL SUBMITTAL NUMBER: : WILLIAMS COMPANY : BRAD KUBIN 2301 SILVER STAR RD. ORLANDO, FL, (407) FAX:(407) DATE RETURNED TO CM: 11/5/ Product Literature(s) REVIEW STATUS: REVIEWERS: PRIMARY: SECONDARY: TAD RIVENBARK MATERN ENGINEERING PHN: (407) FAX: (407) trivenbark@matern.net KEVIN KING MATERN ENGINEERING PHN: (407) FAX: (407) kking@matern.net COMMENTS: PLEASE SEE A/E COMMENTS. **"TRIMLESS MUD-IN" FOR ALL SEEM4 LIGHTS REVISE AND RESUBMIT cc: OWNER : CALVIN WOOLFOLK 6501 MAGIC WAY, BLDG. 200 ORLANDO, FL, (407) FAX:(407) R+B FILE: : X6 RHODES + BRITO ARCHITECTS INC. : 605 E. ROBINSON STREET, SUITE 750 : ORLANDO, FL. : : : FAX PAGE 1 OF 1

2 SHOP DRAWING COMMENTS Date: November 4, 2014 Project: OCPS Clay Springs E.S. By: Tad Rivenbark Proj. No: Submittal: Interior Lighting THE FOLLOWING COMMENTS SHALL BE CONSIDERED AN INTEGRAL PART OF THE SHOP DRAWING AND/OR PRODUCT DATA SUBMITTAL. ACTION CODE KEY A B C D E N No exceptions taken. Make corrections noted. Revise and Resubmit. Submit Specified Item. Rejected. Review not required : No Exceptions Noted, Make Corrections Noted, Revise and Resubmit. Note: Ballast quantities and voltages not reviewed. Provide ballasts as necessary to maintain switching arrangements indicated on drawings. A2: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast shall be multi-voltage as shown on the Fixture Schedule. Sylvania, G.E., or Phillips shall manufacture lamps. A3: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast shall be multi-voltage as shown on the Fixture Schedule. Sylvania, G.E., or Phillips shall manufacture lamps. A3 M/S: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast(s) shall be multi-voltage as shown on the Fixture Schedule. Fixture(s) require multiple ballasts for inside/outside switching. Sylvania, G.E., or Phillips shall manufacture lamps. A3G: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast shall be multi-voltage as shown on the Fixture Schedule. Sylvania, G.E., or Phillips shall manufacture lamps. Corporate Office: 130 Candace Drive, Maitland, Florida Phone: Orlando Fort Myers Jacksonville Tampa Page 1 of 3

3 Shop Drawing Comments - Electrical C2: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast shall be multi-voltage as shown on the Fixture Schedule. Sylvania, G.E., or Phillips shall manufacture lamps. DF2G: Revise and Resubmit. Provide fixture by one of the listed manufacturers. Ballast manufacturer shall be Magnetek, or approved substitution. Sylvania, G.E., or Phillips shall manufacture lamps. Lamps shall be 4100K. E2: Make Corrections Noted. Sylvania, G.E., or Phillips shall manufacture lamp. Lamp shall be rated and stamped for 130 volts. G2: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast shall be multi-voltage as shown on the Fixture Schedule. Sylvania, G.E., or Phillips shall manufacture lamps. Lamps shall be 4100K. EM2: Revise and Resubmit. Provide fixture by one of the listed manufacturers. L4: Make Corrections Noted. Fixture shall be multi-voltage as shown on the Fixture Schedule. L8: Make Corrections Noted. Fixture shall be multi-voltage as shown on the Fixture Schedule. MSL: Make Corrections Noted. Fixture shall be manufactured by Ikan. Ballast manufacturer shall be Magnetek, or approved substitution. Sylvania, G.E., or Phillips shall manufacture lamps. Fixture shall have all accessories listed on the schedule (honeycomb filter, clamps, etc.). Provide safety cable for suspended fixtures. M2: Make Corrections Noted. Sylvania, G.E., or Phillips shall manufacture lamp. Lamp shall be rated and stamped for 130 volts. P2: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast shall be multi-voltage as shown on the Fixture Schedule. Ballasts installed outdoors shall be zero degree ballasts. Sylvania, G.E., or Phillips shall manufacture lamps. Lamps shall be 4100K. P3: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast shall be multi-voltage as shown on the Fixture Schedule. Sylvania, G.E., or Phillips shall manufacture lamps. Lamps shall be 4100K. Corporate Office: 130 Candace Drive, Maitland, Florida Phone: Orlando Fort Myers Jacksonville Tampa Page 2 of 3

4 Shop Drawing Comments - Electrical TL212: Make Corrections Noted. Sylvania, G.E., or Phillips shall manufacture lamps. Lamps shall be 4100K. Lamps shall be rated and stamped for 130 volts. Fixtures and track shall be by the White. Provide (4) complete sets of color filters. V4: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast shall be multi-voltage as shown on the Fixture Schedule. Ballasts installed outdoors shall be zero degree ballasts. The emergency battery pack shall be by one of the specified manufacturers. Sylvania, G.E., or Phillips shall manufacture lamps. Lamps shall be 4100K. V8: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast shall be multi-voltage as shown on the Fixture Schedule. Ballasts installed outdoors shall be zero degree ballasts. Sylvania, G.E., or Phillips shall manufacture lamps. Lamps shall be 4100K. X1B/X2B: No Exceptions Noted. SHL: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballast shall be multi-voltage. Sylvania, G.E., or Phillips shall manufacture lamps. Lamps shall be 4100K. ROOF: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution. Ballasts installed outdoors shall be zero degree ballasts. Sylvania, G.E., or Phillips shall manufacture lamps. Lamps shall be 4100K. END OF SHOP DRAWING COMMENTS Corporate Office: 130 Candace Drive, Maitland, Florida Phone: Orlando Fort Myers Jacksonville Tampa Page 3 of 3

5 OCPS CLAY SPRINGS ES SUBMITTAL DETAILS: SUBJECT: DATE RFI RECIEVED: Oct 23, 2014 DISCIPLINE: Electrical PRIORITY STATUS: 2-STANDARD SPECIFICATION REF: REVIEWER DUE DATE: 11/4/2014 DWG REF. DWG TITLE: SUBMITTAL CONTENTS: INTERIOR LIGHTING, LAMPS & BALLASTS NONE NO OF ITEMS: ITEM DESCRIPTION 1 PRODUCT LITERATURE(S) REVIEWERS: PRIMARY: SECONDARY: SUBMITTAL ASSIGNMENT MEMO TAD RIVENBARK PHN: (407) FAX: (407) trivenbark@matern.net KEVIN KING SUBMITTAL NUMBER: MATERN ENGINEERING MATERN ENGINEERING PHN: (407) FAX: (407) kking@matern.net REVIEW STATUS: REVIEWED FURNISHED AS MARKED REVISE AND RESUBMIT RE-SUBMIT WITH ITEMS NOT REVIEWED REJECTED THIS SUBMITTAL IS ISSUED TO YOU FOR YOUR REVIEW. PLEASE RESPOND AND RETURN...WITH THIS COMPLETED SAM TRANSMITTAL...TO MICHELE BUDAY-URDANETA NO LATER THAN: 11/4/2014. PLEASE COMPLETE REVIEW STATUS AT RIGHT COMMENTS: THIS SUBMITTAL WAS REVIEWED BY : (please print) cc: OWNER : CALVIN WOOLFOLK 6501 MAGIC WAY, BLDG. 200 ORLANDO, FL, CONTR/CM: : WILLIAMS COMPANY : BRAD KUBIN 2301 SILVER STAR RD. R+B FILE: : X6

6 430 West Drive Altamonte Springs, Florida EC Phone: (407) /22/14 CLAY SPRINGS ELEMENTARY TCE JOB # OWNER: Orange County Public Schools Design & Construction Bldg. 200, 6501 Magic Way Orlando, FL GENERAL CONTRACTOR: Williams Company 2301 Silver Star Road Orlando, FL ARCHITECT: Rhodes + Brito Architects 605 E. Robinson Street, Suite 750 Orlando, FL ENGINEER: Matern Professional Engineering, Inc. 130 Candace Drive Maitland, FL SUBCONTRACTOR: Tri-City Electrical Contractors, Inc. 430 West Drive Altamonte Springs, FL Specification Section: Interior Lighting, Lamps & Ballasts (Revised) Submittal Cover.doc ABC ACCREDITED QUALITY CONTRACTOR EC

7 2GT A GEB10IS GLR LP841 A2 Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Low-profile static luminaire provides general illumination for recessed applications; ideal for restricted plenum spaces. ATTRIBUTES Designed exclusively for use with T8 lamps, electronic ballasts and sockets. CONSTRUCTION Smooth hemmed sides and smooth, inward formed end flanges for safe handling. Lighter weight fixture allows for safe, easy installation. Standard steel door frame has superior structural integrity with premium extruded appearance and precision flush mitered corners. Steel door allows easy lens replacement without frame disassembly (for lenses up to.156" think). Powder painted, steel latches provide easy, secure door closure. Superior mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material 100% UV stabilized. No asbestos is used in this product. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel. ELECTRICAL SYSTEM Standard ballast is electronic, thermally protected, resetting, Class P, HPF, non-pcb, UL Listed, CSA certified ballast, universal voltage and sound rated A. Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. LISTING Standard: UL. Optional: Canada CSA or cul; Mexico NOM. WARRANTY Guaranteed for one year against mechanical defects in manufacture. US patents: 6,210,025; 6,231,213; 2,288,471. Specifications subject to change without notice. Notes Specifications Length: 48 (1218) Width: 24 (609) Depth: 3-3/16 (81) Weight: 22 lbs (9.9 kg) 48 (1218) 24 (609) Type General Purpose T8 Troffer GT8 2'x4' 2, 3 or 4 Lamps 3-3/16 (81) All dimensions are inches (millimeters). ORDERING INFORMATION 2GT8 For shortest lead times, configure product using standard options (shown in bold). Example: 2GT A12 MVOLT 1/4 GEB10IS 2 32 A GEB10IS GLR LP841 Series 2GT8 2' wide Trim type (blank) Grid F Overlapping flanged Number of lamps Not included. Lamp type 32 32W T8 (48") NOTES: 1 Available with flush door frames only. 2 MVOLT standard for V applications, hz operation. Some options require voltage specified. Door frame (blank) Flush steel, white FN Flush aluminum, natural FM Flush aluminum, matte black FW Flush aluminum, white RN Regressed aluminum, natural RM Regressed aluminum, matte black RW Regressed aluminum, white Diffuser type Voltage MVOLT Others available. A12 #12 pattern acrylic A12125 #12 pattern acrylic,.125" thick A19 #19 pattern acrylic,.156" thick A15 #15 pattern acrylic,.2" thick PC1S 1/2" x 1/2" x 1/2" plastic cube louver, silver PC2S 1-1/2" x 1-1/2" x 1" plastic cube louver, silver w/ flange 1 PC3S 3/4" x 3/4" x 1/2" plastic cube louver, silver Options 2 1/4 One 4-lamp ballast 1/3 One 3-lamp ballast GEB10IS Electronic ballast, <10% THD, instant start GEB10RS Electronic ballast, <10% THD, rapid start EL Emergency battery pack (nominal 300 lumens EL14 Emergency battery pack (nominal 1400 lumens) GLR Internal fast-blow fuse GMF Internal slow-blow fuse LST Tandem-wired fixture pairs (shared ballasts) PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuit LP_ Lamped, specify lamp type and color LP735 LP841 Lamped; = 82 CRI 700-series, 4100 Kelvin Lamps 3500K LP741 Lamped; 700-series, 4100K JP Palletized and stretch-wrapped without individual cartons; grid trim CSA CSA Certified NOM NOM Certified Fluorescent Sheet # GT8-2x4 STAT-110

8 2GT A GEB10IS GLR LP841 A2 GT8 2'x4' Static T8 Troffer MOUNTING DATA Continuous row mounting of flanged units requires CRE and CRM trim options (see Options). DIMENSIONS NOTE: 1 Recommended rough-in dimensions for F-trim fixtures 24"x48" (Tolerance is +1/4"-0"). Swing-gate range 1-3/16" to 3-15/16". Swing-gate span 23-3/8" to 26-11/16". Fixture swing-gate points require additional 1-1/16" over nominal fixture height. PHOTOMETRICS Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical. Full photometric data on these and other configurations available upon request. 2GT A12 Report LTL 7424 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture GT A12 1/3 Report LTL 7421 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture GT A12 1/4 Report LTL 7425 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture Energy (Calculated in accordance with NEMA standard LE-5) ANNUAL LAMP LAMP BALLAST LER.FL ENERGY COST* DESCRIPTION LUMENS FACTOR WATTS 73 $3.29 (2) 32WT $3.43 (3) 32WT $3.29 (4) 32WT * Comparative yearly lighting energy cost per 1000 lumens Sheet #: GT8-2x Acuity Brands Lighting, Inc., 8/23/07 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA Phone: Fax:

9 2GT A GEB10IS GLR LP841 A3 Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Low-profile static luminaire provides general illumination for recessed applications; ideal for restricted plenum spaces. ATTRIBUTES Designed exclusively for use with T8 lamps, electronic ballasts and sockets. CONSTRUCTION Smooth hemmed sides and smooth, inward formed end flanges for safe handling. Lighter weight fixture allows for safe, easy installation. Standard steel door frame has superior structural integrity with premium extruded appearance and precision flush mitered corners. Steel door allows easy lens replacement without frame disassembly (for lenses up to.156" think). Powder painted, steel latches provide easy, secure door closure. Superior mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material 100% UV stabilized. No asbestos is used in this product. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel. ELECTRICAL SYSTEM Standard ballast is electronic, thermally protected, resetting, Class P, HPF, non-pcb, UL Listed, CSA certified ballast, universal voltage and sound rated A. Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. LISTING Standard: UL. Optional: Canada CSA or cul; Mexico NOM. WARRANTY Guaranteed for one year against mechanical defects in manufacture. US patents: 6,210,025; 6,231,213; 2,288,471. Specifications subject to change without notice. Notes Specifications Length: 48 (1218) Width: 24 (609) Depth: 3-3/16 (81) Weight: 22 lbs (9.9 kg) 48 (1218) 24 (609) Type General Purpose T8 Troffer GT8 2'x4' 2, 3 or 4 Lamps 3-3/16 (81) All dimensions are inches (millimeters). ORDERING INFORMATION 2GT8 For shortest lead times, configure product using standard options (shown in bold). Example: 2GT A12 MVOLT 1/4 GEB10IS 3 32 A GEB10IS GLR LP841 Series 2GT8 2' wide Trim type (blank) Grid F Overlapping flanged Number of lamps Not included. Lamp type 32 32W T8 (48") NOTES: 1 Available with flush door frames only. 2 MVOLT standard for V applications, hz operation. Some options require voltage specified. Door frame (blank) Flush steel, white FN Flush aluminum, natural FM Flush aluminum, matte black FW Flush aluminum, white RN Regressed aluminum, natural RM Regressed aluminum, matte black RW Regressed aluminum, white Diffuser type Voltage MVOLT Others available. A12 #12 pattern acrylic A12125 #12 pattern acrylic,.125" thick A19 #19 pattern acrylic,.156" thick A15 #15 pattern acrylic,.2" thick PC1S 1/2" x 1/2" x 1/2" plastic cube louver, silver PC2S 1-1/2" x 1-1/2" x 1" plastic cube louver, silver w/ flange 1 PC3S 3/4" x 3/4" x 1/2" plastic cube louver, silver Options 2 1/4 One 4-lamp ballast 1/3 One 3-lamp ballast GEB10IS Electronic ballast, <10% THD, instant start GEB10RS Electronic ballast, <10% THD, rapid start EL Emergency battery pack (nominal 300 lumens EL14 Emergency battery pack (nominal 1400 lumens) GLR Internal fast-blow fuse GMF Internal slow-blow fuse LST Tandem-wired fixture pairs (shared ballasts) PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuit LP_ Lamped, specify lamp type and color LP735 LP841 Lamped; = 82 CRI 700-series, 4100 Kelvin Lamps 3500K LP741 Lamped; 700-series, 4100K JP Palletized and stretch-wrapped without individual cartons; grid trim CSA CSA Certified NOM NOM Certified Fluorescent Sheet # GT8-2x4 STAT-110

10 2GT A GEB10IS GLR LP841 A3 GT8 2'x4' Static T8 Troffer MOUNTING DATA Continuous row mounting of flanged units requires CRE and CRM trim options (see Options). DIMENSIONS NOTE: 1 Recommended rough-in dimensions for F-trim fixtures 24"x48" (Tolerance is +1/4"-0"). Swing-gate range 1-3/16" to 3-15/16". Swing-gate span 23-3/8" to 26-11/16". Fixture swing-gate points require additional 1-1/16" over nominal fixture height. PHOTOMETRICS Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical. Full photometric data on these and other configurations available upon request. 2GT A12 Report LTL 7424 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture GT A12 1/3 Report LTL 7421 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture GT A12 1/4 Report LTL 7425 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture Energy (Calculated in accordance with NEMA standard LE-5) ANNUAL LAMP LAMP BALLAST LER.FL ENERGY COST* DESCRIPTION LUMENS FACTOR WATTS 73 $3.29 (2) 32WT $3.43 (3) 32WT $3.29 (4) 32WT * Comparative yearly lighting energy cost per 1000 lumens Sheet #: GT8-2x Acuity Brands Lighting, Inc., 8/23/07 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA Phone: Fax:

11 2GT A GEB10IS GLR LST11 LP841 A3 M/S Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Low-profile static luminaire provides general illumination for recessed applications; ideal for restricted plenum spaces. ATTRIBUTES Designed exclusively for use with T8 lamps, electronic ballasts and sockets. CONSTRUCTION Smooth hemmed sides and smooth, inward formed end flanges for safe handling. Lighter weight fixture allows for safe, easy installation. Standard steel door frame has superior structural integrity with premium extruded appearance and precision flush mitered corners. Steel door allows easy lens replacement without frame disassembly (for lenses up to.156" think). Powder painted, steel latches provide easy, secure door closure. Superior mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material 100% UV stabilized. No asbestos is used in this product. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel. ELECTRICAL SYSTEM Standard ballast is electronic, thermally protected, resetting, Class P, HPF, non-pcb, UL Listed, CSA certified ballast, universal voltage and sound rated A. Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. LISTING Standard: UL. Optional: Canada CSA or cul; Mexico NOM. WARRANTY Guaranteed for one year against mechanical defects in manufacture. US patents: 6,210,025; 6,231,213; 2,288,471. Specifications subject to change without notice. Notes Specifications Length: 48 (1218) Width: 24 (609) Depth: 3-3/16 (81) Weight: 22 lbs (9.9 kg) 48 (1218) 24 (609) Type General Purpose T8 Troffer GT8 2'x4' 2, 3 or 4 Lamps 3-3/16 (81) All dimensions are inches (millimeters). ORDERING INFORMATION 2GT8 For shortest lead times, configure product using standard options (shown in bold). Example: 2GT A12 MVOLT 1/4 GEB10IS 3 32 A GEB10IS GLR LST11 LP841 Series 2GT8 2' wide Trim type (blank) Grid F Overlapping flanged Number of lamps Not included. Lamp type 32 32W T8 (48") NOTES: 1 Available with flush door frames only. 2 MVOLT standard for V applications, hz operation. Some options require voltage specified. Door frame (blank) Flush steel, white FN Flush aluminum, natural FM Flush aluminum, matte black FW Flush aluminum, white RN Regressed aluminum, natural RM Regressed aluminum, matte black RW Regressed aluminum, white Diffuser type Voltage MVOLT Others available. A12 #12 pattern acrylic A12125 #12 pattern acrylic,.125" thick A19 #19 pattern acrylic,.156" thick A15 #15 pattern acrylic,.2" thick PC1S 1/2" x 1/2" x 1/2" plastic cube louver, silver PC2S 1-1/2" x 1-1/2" x 1" plastic cube louver, silver w/ flange 1 PC3S 3/4" x 3/4" x 1/2" plastic cube louver, silver Options 2 1/4 One 4-lamp ballast 1/3 One 3-lamp ballast GEB10IS Electronic ballast, <10% THD, instant start GEB10RS Electronic ballast, <10% THD, rapid start EL Emergency battery pack (nominal 300 lumens EL14 Emergency battery pack (nominal 1400 lumens) GLR Internal fast-blow fuse GMF Internal slow-blow fuse LST Tandem-wired fixture pairs (shared ballasts) 11' fixture whips PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuit LP_ Lamped, specify lamp type and color LP735 LP841 Lamped; = 82 CRI 700-series, 4100 Kelvin Lamps 3500K LP741 Lamped; 700-series, 4100K JP Palletized and stretch-wrapped without individual cartons; grid trim CSA CSA Certified NOM NOM Certified Fluorescent Sheet # GT8-2x4 STAT-110

12 2GT A GEB10IS GLR LST11 LP841 A3 M/S GT8 2'x4' Static T8 Troffer MOUNTING DATA Continuous row mounting of flanged units requires CRE and CRM trim options (see Options). DIMENSIONS NOTE: 1 Recommended rough-in dimensions for F-trim fixtures 24"x48" (Tolerance is +1/4"-0"). Swing-gate range 1-3/16" to 3-15/16". Swing-gate span 23-3/8" to 26-11/16". Fixture swing-gate points require additional 1-1/16" over nominal fixture height. PHOTOMETRICS Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical. Full photometric data on these and other configurations available upon request. 2GT A12 Report LTL 7424 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture GT A12 1/3 Report LTL 7421 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture GT A12 1/4 Report LTL 7425 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture Energy (Calculated in accordance with NEMA standard LE-5) ANNUAL LAMP LAMP BALLAST LER.FL ENERGY COST* DESCRIPTION LUMENS FACTOR WATTS 73 $3.29 (2) 32WT $3.43 (3) 32WT $3.29 (4) 32WT * Comparative yearly lighting energy cost per 1000 lumens Sheet #: GT8-2x Acuity Brands Lighting, Inc., 8/23/07 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA Phone: Fax:

13 2GT FW A GEB10IS GLR ABC LP841 A3G Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Low-profile static luminaire provides general illumination for recessed applications; ideal for restricted plenum spaces. ATTRIBUTES Designed exclusively for use with T8 lamps, electronic ballasts and sockets. CONSTRUCTION Smooth hemmed sides and smooth, inward formed end flanges for safe handling. Lighter weight fixture allows for safe, easy installation. Standard steel door frame has superior structural integrity with premium extruded appearance and precision flush mitered corners. Steel door allows easy lens replacement without frame disassembly (for lenses up to.156" think). Powder painted, steel latches provide easy, secure door closure. Superior mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material 100% UV stabilized. No asbestos is used in this product. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel. ELECTRICAL SYSTEM Standard ballast is electronic, thermally protected, resetting, Class P, HPF, non-pcb, UL Listed, CSA certified ballast, universal voltage and sound rated A. Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. LISTING Standard: UL. Optional: Canada CSA or cul; Mexico NOM. WARRANTY Guaranteed for one year against mechanical defects in manufacture. US patents: 6,210,025; 6,231,213; 2,288,471. Specifications subject to change without notice. Notes Specifications Length: 48 (1218) Width: 24 (609) Depth: 3-3/16 (81) Weight: 22 lbs (9.9 kg) 48 (1218) 24 (609) Type General Purpose T8 Troffer GT8 2'x4' 2, 3 or 4 Lamps 3-3/16 (81) All dimensions are inches (millimeters). ORDERING INFORMATION 2GT8 For shortest lead times, configure product using standard options (shown in bold). Example: 2GT A12 MVOLT 1/4 GEB10IS FW A GEB10IS GLR ABC LP841 Series 2GT8 2' wide Trim type (blank) Grid F Overlapping flanged Number of lamps Not included. Lamp type 32 32W T8 (48") NOTES: 1 Available with flush door frames only. 2 MVOLT standard for V applications, hz operation. Some options require voltage specified. Door frame (blank) Flush steel, white FN Flush aluminum, natural FM Flush aluminum, matte black FW Flush aluminum, white RN Regressed aluminum, natural RM Regressed aluminum, matte black RW Regressed aluminum, white Diffuser type Voltage MVOLT Others available. A12 #12 pattern acrylic A12125 #12 pattern acrylic,.125" thick A19 #19 pattern acrylic,.156" thick A15 #15 pattern acrylic,.2" thick PC1S 1/2" x 1/2" x 1/2" plastic cube louver, silver PC2S 1-1/2" x 1-1/2" x 1" plastic cube louver, silver w/ flange 1 PC3S 3/4" x 3/4" x 1/2" plastic cube louver, silver Options 2 1/4 One 4-lamp ballast 1/3 One 3-lamp ballast GEB10IS Electronic ballast, <10% THD, instant start GEB10RS Electronic ballast, <10% THD, rapid start EL Emergency battery pack (nominal 300 lumens EL14 Emergency battery pack (nominal 1400 lumens) GLR Internal fast-blow fuse GMF Internal slow-blow fuse LST Tandem-wired fixture pairs (shared ballasts) PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuit LP_ Lamped, specify lamp type and color LP735 LP841 Lamped; = 82 CRI 700-series, 4100 Kelvin Lamps 3500K LP741 Lamped; 700-series, 4100K JP Palletized and stretch-wrapped without individual cartons; grid trim CSA ABC = CSA Triple Certified Gasket NOM NOM Certified Fluorescent Sheet # GT8-2x4 STAT-110

14 2GT FW A GEB10IS GLR ABC LP841 A3G GT8 2'x4' Static T8 Troffer MOUNTING DATA Continuous row mounting of flanged units requires CRE and CRM trim options (see Options). DIMENSIONS NOTE: 1 Recommended rough-in dimensions for F-trim fixtures 24"x48" (Tolerance is +1/4"-0"). Swing-gate range 1-3/16" to 3-15/16". Swing-gate span 23-3/8" to 26-11/16". Fixture swing-gate points require additional 1-1/16" over nominal fixture height. PHOTOMETRICS Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical. Full photometric data on these and other configurations available upon request. 2GT A12 Report LTL 7424 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture GT A12 1/3 Report LTL 7421 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture GT A12 1/4 Report LTL 7425 Lumens per lamp Lum. eff % S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30%10% Zonal Lumens Summary Zone Lumens%Lamp%Fixture Energy (Calculated in accordance with NEMA standard LE-5) ANNUAL LAMP LAMP BALLAST LER.FL ENERGY COST* DESCRIPTION LUMENS FACTOR WATTS 73 $3.29 (2) 32WT $3.43 (3) 32WT $3.29 (4) 32WT * Comparative yearly lighting energy cost per 1000 lumens Sheet #: GT8-2x Acuity Brands Lighting, Inc., 8/23/07 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA Phone: Fax:

15 GT8 F 2 32 A GEB10IS GLR LP841 C2-FLANGE Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Static T8 fixtures provide general illumination for recessed applications; ideal for restricted plenum spaces. ATTRIBUTES Designed exclusively for use with T8 lamps, electronic ballasts and sockets. CONSTRUCTION Smooth hemmed sides and smooth, inward formed end flanges for safe handling. Lighter weight fixture allows safe, easy installation. Standard steel door frame has superior structural integrity with premium extruded appearance and precision flush mitered corners. Powderpainted, steel latches provide easy, secure door closure. Superior mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material 100% UV stabilized. No asbestos is used in this product. FINISH Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel. OPTICAL Broad range of lens options available. ELECTRICAL SYSTEM Standard ballast is electronic, thermally protected, resetting, Class P, HPF, non-pcb, UL Listed, CSA certified ballast, universal voltage and sound rated A. Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. LISTING Standard: UL. Optional: Canada CSA or cul; Mexico NOM. WARRANTY Guaranteed for one year against mechanical defects in manufacture. Specifications subject to change without notice. ORDERING INFORMATION Notes Specifications Length: 48 (1218) Width: 12 (305) Depth: 4-1/2 (114) Weight: 17 lbs (7.7 kg) All dimensions are inches (millimeters). Static Troffer GT8 1'x4' 1, 2 or 3 Lamps For shortest lead times, configure product using standard options (shown in bold). Example: GT A12 MVOLT GEB10IS D L Type GT8 F 2 32 A GEB10IS GLR LP841 Series GT8 1' wide Trim type (blank) Grid F Overlapping flanged Number of lamps Not included. Lamp type 32 32W T8 (48") NOTE: 1 MVOLT standard for V applications, hz operation. Some options require voltage specified. Door frame (blank) Flush steel FN Flush aluminum, natural FM Flush aluminum, matte black FW Flush aluminum, white RN Regressed aluminum, natural RM Regressed aluminum, matte black RW Regressed aluminum, white Diffuser type A12 #12 pattern acrylic A12125 #12 pattern acrylic, 0.125" thick A19 #19 pattern acrylic, 0.156" thick A15 #15 pattern acrylic, 0.2" thick PC1S 1/2" x 1/2" x 1/2" plastic cube louver, silver PC2S 1-1/2" x 1-1/2" x 1" plastic cube louver, silver PC3S 3/4" x 3/4" x 1/2" plastic cube louver, silver Volts MVOLT Others available. Options 1 1/3 One three-lamp ballast GEB10IS Electronic ballast, <10% THD, instant start GEB10RS Electronic ballast, <10% THD, rapid start EL Emergency battery pack (nominal 300 lumens EL14 Emergency battery pack (nominal 1400 lumens) GLR Internal fast-blow fuse GMF Internal slow-blow fuse PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuit LP Lamped, specify lamp type and color LP841 LP735= 82 Lamped, CRI series, Kelvin Lamps 3500K PAF Painted after fabrication (white enamel) SSR Specular silver interior finish (95% reflective) CRE Flanged trim for continuous row mounting (end) CRM Flanged trim for continuous row mounting (middle) JP Palletized and stretch-wrapped without individual cartons; grid trim only. CSA CSA Certified NOM NOM Certified Fluorescent Sheet #: GT8-1x4 STAT-95

16 GT8 F 2 32 A GEB10IS GLR LP841 C2-FLANGE GT8 1'x4' Static Troffer MOUNTING DATA Continuous row mounting of flanged units requires CRE and CRM trim options (see Options). G F 1 DIMENSIONS Inches (millimeters). Subject to change without notice. LC 4-1/2 (114) Lay-in Grid (exposed or concealed grid) Overlapping Flanged Trim with swing-gate hangers 2-1/2 (64) 12 (305) NOTE: 1 Recommended rough-in dimensions for F trim fixtures 12"x48" (Tolerance is +1/4", -O ). Swing-gate range 1-9/16" to 3-3/4", span 10-3/4" to 14-3/4". LC 4-1/2 (114) 2-1/2 (64) 12 (305) PHOTOMETRICS Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical. Full photometric data on these and other configurations available upon request. Coefficients of Utilization pf 20% pc 80% 50% 30% pw 70% 50% 30% 50% 30% 10% 50% 30% 10% RCR GT A12 Report: LTL12536 LUMENS PER LAMP: 2850 Luminaire Efficiency: 77.7% Zonal Lumen Summary Zone Lumens % Lamp % Fixture Sheet #: GT8-1x Acuity Brands Lighting, Inc. Rev. 3/5/2009 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA Phone: Fax:

17 Architectural HH6PL 6" Architectural Horizontal CFL Downlight HH6PL-2X26-E-VOLT-FUSE-6505-P- WH HH6PL-1X9-E-MVOLT Project Name: Note: DF2G DESCRIPTION 1. LAMP HOLDER - Aluminum lamp holder effectively provides heat dissipation and ventilation. Unitized optics guarantees proper trim to housing installation. Tool-less installation adjustability from either outside the housing or inside the housing. 2. MOUNTING BRACKET - Constructed from 16-gauge steel and is supplied with C-channels that are adjustable up to 28". Mounting brackets may be adjusted up to 2-¾" vertically from inside the housing. 3. RETAINING SPRINGS - Precision tooled springs secure trim to mounting frame, for effortless and tool-less installation. 4. JUNCTION BOX/BALLAST - UL and ETL listed for through-branch circuit wiring and has four ½" Universal Technologies or Lutron Electronics. 5. MOUNTING FRAME OPTICS 6. REFLECTOR - Self-flanged.050" aluminum reflector with low iridescent finish. Reflector provides 45-degree lamp-to-reflector image cutoff. A. Height = 5-3/8" B. Trim Aperture = 6-1/8" C. Cut-out = 6-7/8" D. Trim Outside Diameter = 7-3/8" E. Width = 16" F. Length = 12-1/2" 7. GROOVE BAFFLE - Self-flanged one-piece aluminum with concentric rings. 8. LENS - Choice of either tempered clear, tempered prismatic or tempered frosted lens fastened with two torsion springs for easy re-lamping. ETL/UL listed for wet or damp location. LISTING ETL/UL listed for through-branch circuit wiring and damp locations. Wet location only with lens trims. Energy Star Qualified Models: HH6PL - ITEM SELECTOR: Sample of HH6PL-1X32-E-MVOLT-EMG CL-WH LAMP BASE GUIDE (Sockets will accept all designated lamp bases listed.) 13W 18W 26W 32W 42W 57W 70W G24q-3 GX24q-3 GX24q-3 WATTAGE BALLAST VOLTAGE EMERGENCY OPTIONS TRIM TYPE & DESCRIPTION REFLECTOR BAFFLE GLASS 1 LAMP 2 LAMPS (E) Electronic MVOLT (120/277) EMG 750 (750 Lumens) CL WH 1X9 2X9 (M) Magnetic EMG 1300 (1300 Lumens) SCH ** P Green 1X13 2X13 (S) Energy Star INTG 750 (750 Lumens) SHZ ** Red 1X18 2X INTG 1300 (1300 Lumens) WT 1X26 2X26 EMG-D-750 (750 Lumens) W 1X32 INTG-D-750 (750 Lumens) X42 ICE-1300 (1300 Lumens) (M) Magnetic 2 - (S) Energy Star 3 - MARK MARK LUT-E (EC3D) = Not available on 13W, 57W, 70W, 6 - EMG 7 - INTG 8 - EMG-D 9 - INTG-D = Emergency battery pack w/ integral(reflector) test switch for damp 10 - ICE 11 - FUSE 12 - RIF = Radio interference filter) Specifications: HH6PL 1X9 - E - MVOLT WATT DIMMING Mark 7 3 OTHER OPTIONS Mark Lut-E (EC3D) VOLTAGE EMERGENCY OPTIONS TRIM TYPE RING GLASS REFLECTOR BAFFLE CL Clear WH White SHZ Satin Haze P (Low Iridescent) GLASS WT Wheat Only available MB on XX09, XX10 W White and XX11 series. RING WH Standard on all trims SCH** ** Only available on XX01 CL SHZ* Satin Haze * Provided w/ satin haze ring only * please consult factory. A division of Elite Lighting Submittal form is Specifications and Dimensions subject to change without notice. MAX-SPECS

18 6 Horizontal CFL Optics HH6PL-2X26-E-VOLT-FUSE-6505-P- WH HH6PL-1X9-E-MVOLT Project Name: Note: DF2G 6501-CL Reflector 6502-WH-CL Baffle with Reflector 6507-SHZ Wall Wash Reflector 6508-CL Crossblade Reflector REFLECTOR FINISH: CL, WT, MB, SHZ, W BAFFLE FINISH: WH, P REFLECTOR FINISH: CL, WT, MB, SHZ, W REFLECTOR FINISH: CL, WT, MB, SHZ RING FINISH: WH, SCH, SHZ A B= 7-3/8 REFLECTOR FINISH: CL A B C= 1 RING FINISH: WH, SCH, SHZ A B= 7-3/8 RING FINISH: WH A B= 7-3/ CL Reflector with Fresnel Glass Lens 6504-CL Reflector with Prismatic Glass Lens 6505-P Baffle with Fresnel Glass Lens 6506-WH Baffle with Prismatic Glass Lens REFLECTOR FINISH: CL, WT, MB, SHZ, W REFLECTOR FINISH: CL, WT, MB, SHZ, W BAFFLE FINISH: WH, P BAFFLE FINISH: WH, P RING FINISH: WH A B C= 1 RING FINISH: WH A B C= 1 RING FINISH: WH A B C= 1 RING FINISH: WH A B C= CL Reflector with Frosted Glass Lens 6515-WT Reflector with Tempered Clear Glass 6512-WH Baffle with Frosted Glass Lens 6513-WH Baffle with Tempered Clear Glass REFLECTOR FINISH: CL, WT, MB, SHZ, W REFLECTOR FINISH: CL, WT, MB, SHZ, W BAFFLE FINISH: WH, P BAFFLE FINISH: WH, P RING FINISH: WH, SCH, SHZ A B C= 1 RING FINISH: WH, SCH, SHZ A B C= 1 RING FINISH: WH A B C= 1 RING FINISH: WH A B C= CL Reflector with Prismatic Plastic Lens 6518-WT Reflector with Tempered Clear Plastic 6517-WH Baffle with Prismatic Plastic Lens 6519-WH Baffle with Tempered Clear Plastic REFLECTOR FINISH: CL, WT, MB, SHZ, W REFLECTOR FINISH: CL, WT, MB, SHZ, W BAFFLE FINISH: WH, P BAFFLE FINISH: WH, P RING FINISH: WH A B C= 1 RING FINISH: WH A B C= 1 RING FINISH: WH A B C= 1 RING FINISH: WH A B C= 1 A division of Elite Lighting Submittal form is Specifications and Dimensions subject to change without notice. REV: MAXILUME-SPEC

19 TYPE E2 Model #XPI-C-75-G XPI SERIES X PI Incandescent Lighting for Hazardous and Hostile Locations Class I, Division 1, Groups C & D Class II, Division 1 & 2, Groups E, F & G Class III Wet Locations UL Listed for Paint Spray Booth NEMA 3, 4X, 7CD & 9EFG UL 844 Hazardous Locations Factory Sealed 47

20 XPI SERIES Incandescent Lighting for Hazardous and Hostile Locations 48 RIG-A-LITE

21 INCANDESCENT XPI Series Catalog Number Logic XPI-P-75-G - C - - G BASIC SERIES 1 2 MOUNTING STYLE 3 HUB SIZE 4 GUARD Certification Guide Location Maximum Wattage Without With Std. Dome With 30 Angle Operating Class, Division Groups Reflector Reflector Reflector Temperature Code 49

22 INCANDESCENT XPI Series (Lamps not included) Shipping Mounting Style Max. Lamp Watts Conduit Size (In.) Catalog Number Weight (Lbs.) Pendant XPI-P-50-G Mount XPI-P-75-G Ceiling XPI-C-50-G Mount XPI-C-75-G Wall XPI-W-50-G Mount XPI-W-75-G XPI Dimensions (inches) PENDANT CEILING WALL 50 RIG-A-LITE

23 INCANDESCENT XPI Series Components and Accessories Catalog Shipping Reflectors Number Description Weight (Lbs.) Catalog Shipping Guard Number Description Weight (Lbs.) XPI200DR XPI200AR Catalog Shipping Lamp Socket Number Description Weight (Lbs.) Cover Box Shipping Hanger Conduit Conduit Catalog Weight Boxes Size (In.) Size (In.) Number (Lbs.) XPIBB50 XPIBB75 XPITB50 XPITB75 XPIB50 XPIB75 XPIB250 XPIB275 Catalog Shipping Exit Sign Number Description Weight (Lbs.) XPIEXIT 51

24 INCANDESCENT XPI Series Parts List Part No. Description Weight 52 RIG-A-LITE

25 SB GEB10IS GLR G2 Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE For applications that require the clean appearance of a flat-bottom diffuser. Provides high light levels for storage rooms, offices or retail applications. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. CONSTRUCTION Linear side prisms control brightness, pyramidal bottom prisms minimize lamp image. Continuous side flanges on fixture body provide light trap and continuous diffuser support to prevent accidental opening and simplify maintenance. Full depth, white enamel end plates. Die-formed from code gauge cold-rolled steel. Channel cover snaps into place without the use of tools. Full end cap factory installed to reduce job site labor. Diffuser is extruded clear acrylic. Finish: Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Finished with high-gloss, baked white enamel. ELECTRICAL Thermally protected, resetting, Class P, HPF, UL listed, CSA Certified ballast is standard. Energy saving and electronic ballasts are sound rated A. Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures. INSTALLATION For surface or stem mounting, individual or row installation. LISTINGS UL listed to U.S. and Canadian Safety Standards. Optional: Canada CSA or Mexico NOM WARRANTY Guaranteed for one year against mechanical defects in manufacture Note: Specifications subject to change without notice. Type Specifications T8 Length: 24 (61.0) 48 (122.0) 96 (243.9) T5 Length: 22-1/2 (57.2) 46-1/2 (118.1) 92-1/2 (235.0) Width: 8-3/8 (21.2) Depth: 2-5/8 (6.7) 3-9/16 (9.0) 8-5/8 (21.9) Square-Basket Wraparound 1-3/8 (3.5) SB T8/T5 NARROW BODY 2', 4' or 8' lengths 2 lamps T8 1-1/2 (3.8) 2-5/8 (6.7) 2-5/8 (6.7) All dimensions are inches (centimeters) unless specified otherwise. 3-3/4 (9.5) 8-5/8 (21.9) T5 ORDERING INFORMATION For shortest lead times, configure products using standard options (shown in bold.) Example: SB 2 32 MVOLT GEB10IS SB GEB10IS GLR Series Lamp type Voltage Options SB 2 2 lamps, 8-3/8" wide For tandem double-length unit, add prefix T. Example: TSB 17 17W T8 (24") 32 32W T8 (48") 14T5 14W T5 (22-1/2") 1 24T5HO 24W T5 HO (22-1/2") 1 28T5 28W T5 (46-1/2") 1 54T5HO 54W T5 HO (46-1/2") MVOLT 2 Shipped installed in fixture GEB10IS T8 Electronic ballast, <10% THD, instant start 3 GEB10RS T8 Electronic ballast, <10% THD, program rapid start 3 GEB10PS T5 Electronic ballast, <10% THD, program start 4 GEB95.95 ballast factor T5 5 GEB95S.95 ballast factor T5 step dimming 5 EL Emergency battery pack (nominal 300 lumens, see Life Safety Section) EL14 Emergency battery pack (nominal 1400 lumens, see Life Safety Section) GLR Internal fast-blow fuse 6 GMF Internal slow-blow fuse 6 RE 120V residential electronic ballast 7 CSA Listed and labeled to comply with Canadian Standards NOM NOM certified SSR Specular silver interior finish (95% reflective) Accessories: Order as separate catalog number. SQ_ Swivel-stem hanger (specify length in 2" increments). 1B Ceiling spacer (1-1/2" to 2-1/2" from ceiling). DSH24 Double stem hanger for 4' fixtures, 24" stems 8. Notes 1 T5 lamp types use GEBIOPS ballast. 2 Electronic ballast 120 through 277V only. 3 Only available with T8 configurations. 4 Only available with T5 ballast. 5 Only available with 14T5 or 28T5. 6 Must specify voltage. 7 Must specify voltage, 120V. Energy Star qualified. 8 Only available on 2-lamp 4' SB configuration. FLUORESCENT SBN

26 SB GEB10IS GLR G2 SB Square Basket Wraparound, Narrow Body MOUNTING DATA For unit or row installation. Surface or stem mounting. UNIT INSTALLATION ROW INSTALLATION Minimum of two hangers required. One hanger per fixture plus one per row required. DIMENSIONS All dimensions are inches (centimeters). Specifications subject to change without notice. A = 1/4 x 1/2 (64 x 13) Oval Hole D = 11/16 (17) Dia. K.O. B = 1/4 x 1/2 (64 x 13) K.O. E = 2 (51) Dia. K.O. C = 7/8 (22) Dia.K.O. 4-1/2 (11.4) 22-1/2 (57.2) 10-/58 (27.0) 24 (61.0) 1-3/4 (4.4) 1-3/4 (4.4) 1-3/4 (4.4) 1-3/4 (4.4) A B A C A B A A B A C A B A 3-1/2 (8.9) 2.5/8 (6.7) 1-3/4 (4.4) 46-1/2 (118.1) 23 (58.4) 3-1/2 (8.9) 2.5/8 (6.7) 1-3/4 (4.4) 3-1/2 (8.9) 2.5/8 (6.7) 1-3/4 (4.4) 48 (122.0) 24 (61.0) 3-1/2 (8.9) 2.5/8 (6.7) 1-3/4 (4.4) A C B C B A C A C B C B A C 92-1/2 (235.0) 3-1/2 (8.9) 2.5/8 (6.7) 1-3/4 (4.4) 23 (58.4) 3-5/8 (9.2) 2-5/8 (6.7) 1-7/8 (4.8) 1-7/8 (4.8) 3-5/8 (9.2) 2-5/8 (6.7) 23 (58.4) 3-1/2 (8.9) 2.5/8 (6.7) 1-3/4 (4.4) A C B C B A C A C B B A C 96 (243.0) 3-1/2 (8.9) 2.5/8 (6.7) 1-3/4 (4.4) 23 (58.4) 3-5/8 (9.2) 2-5/8 (6.7) 1-7/8 (4.8) 1-7/8 (4.8) 3-5/8 (9.2) 2-5/8 (6.7) 23 (58.4) 3-1/2 (8.9) 2.5/8 (6.7) 1-3/4 (4.4) A C B C B A C A C B B A C PHOTOMETRICS Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical. All data based on 25 C. Full photometric data on these and other configurations available upon request. Test # LTL SB 2 32 GEB10IS Coefficient of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance: 20% RCC% 80% 70% 50% 30% 10% 0% RW% RCR Zonal Lumens Summary Zone Lumens %Lamp %Fixture , , , , , Test # LTL SB 2 28 T5 GEB95 Coefficient of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance: 20% RCC% 80% 70% 50% 30% 10% 0% RW% RCR Zonal Lumens Summary Zone Lumens %Lamp %Fixture , , , , , SB-N FLUORESCENT: One Lithonia Way Conyers, GA Phone: Fax: Acuity Brands, Inc. All rights reserved Rev. 06/06/11

27 LL90HW-6N-27-P-W-T06H12 EM2 Model Number: Job: LL90HW HIGH WATTAGE EMERGENCY LIGHTING UNIT Approvals: FEATURES Available with steel or plastic housings Dual voltage input 120/277 VAC, 60 Hz Maintenance free, sealed lead calcium or NiCad battery, 24 hour recharge time Low voltage disconnect prevents deep discharge Brownout protection Fully automatic, solid state charger Line latching feature prevents the unit from turning on during installation to a non-energized AC circuit Fully adjustable 9 watt, glare-free heads (alternate lamp heads available) Optional G2 Self-Test/Self-Diagnostics available UL Listed for damp location use The LL90HW combines either 6 or 12 volts with capabilities of up to 100 watts into a low-profile, contemporary housing design. Built for dependability, this economical unit offers solid-state electronics and fully adjustable designer heads to compliment any environment. DIMENSIONS LL90HW Plastic UV stable thermosplastic CONFORMANCE TO CODES & STANDARDS The LL90HW Series is U.L. Listed and meets or exceeds the following: U.L. 924, N.E.C. requirements and N.F.P.A WARRANTY Any component that fails due to manufacturer s defect is guaranteed for 1 year with a separate 5 year pro-rated warranty on the battery. The warranty does not cover physical damage, abuse or acts of God. Manufacturer reserves the right to charge for such repairs if deemed necessary. 5 years. LL90HW Steel Plastic W Steel 18-36W Steel 54W Steel W A B C SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE /11

28 LL90HW-6N-27-P-W-T06H12 EM2 CONSTRUCTION Plastic: Precision molded housings constructed of UV stable UL 924 V-0 flame retardant thermoplastic. Units resist denting, peeling, scratching, and corrosion. Toolless access provided for easy maintenance, universal J-box mounting pattern and key hole slots provided for simple installation. Knockouts are provided on the top, back, and sides for easy wire entry. Standard finish is textured white, also available in black. Steel: Die formed 20 gauge steel housing with epoxy powder coat finish. White finish is standard. Universal J-box mounting patter and key hole slots provided for simple installation. Knockouts are provided on top, back, and sides for easy wire entry. ILLUMINATION Two fully adjustable, attractive, square shaped lamp heads with rounded corners and vacuum metallized reflectors allow for maximum light to be delivered to the path of egress. Units supplied with (2) 9 watt wedge based tungsten lamps as standard. ELECTRONICS 120/277 VAC dual voltage input with surge protected, solid-state regulated charging circuitry. The system is provided with low voltage disconnect, line-latch, brownout protection, AC indictator LED lamp and test switch. Steel units also feature a high-charge indicator LED. Regulated charge voltage prevents over/under charging that shortens battery life and reduces capacity. The brownout protection circuitry will automatically switch the unit into emergency mode if the utility voltage sags below 20% of nominal. Line-latch circuitry prevents the unit from turning on during installation to a non-energized AC circuit, saving time in reconnection of battery terminals. BATTERY Maintenance free, sealed nickel cadmium or lead calcium batteries, are available. Standard sustained emergency operation is for 90 minutes with the illumination source providing full light output. The suggested operating temperature range for nickel cadmium batteries, is 20 F (-7 C) to 95 (35 C). The suggested operating temperature range for sealed lead calcium batteries is 65 F (19 C) to 85 F (30 C). SELF-TESTING/ SELF-DIAGNOSTIC OPERATION (Option: G2) Circuitry continuously monitors the operating condition of the AC power, battery supply voltage, emergency lamp continuity, transfer circuit, and charging circuit. Circuit also provides a self-testing automatic code compliant feature. The self-test feature will perform a full function test of the equipment in emergency mode for five minutes every month, and a 90 minute test twice a year. If a failure is detected, visual status will occure through a series of blinkds on the LED indicator. LED will blink until fault has been corrected. OPERATION Type LL90HW-6-27 LL90HW-6-54 LL90HW LL90HW AC Volts Input Amp Max Volts Output Volts Watts Output (hour) 1½ ORDERING INFORMATION LL90HW - 6N PS - W - T06H12 G2 SERIES VOLTAGE MAX. WATTAGE HOUSING TYPE HOUSING FINISH OPTIONS LL90HW 6 = Lead Acid Battery 6N = NiCad Battery 12 = Lead Acid Battery 12N = NiCad Battery 6V Lead Acid V Lead Acid V NiCad V NiCad 54 S = Steel P = Plastic B = Black W = White G2 1 = Self Test/Self-Diagnostics TD = Time Delay LC = 3' Line Cord with Plug 220 = 220V, 50Hz (up to 54W) XX 2 = Alternate Lamp Heads T06H12 = 12 watt halogen heads 1 Not available with NiCad 2 100w unit only available with steel housing NOTE: LL90HW is shipped standard with (2) 9 watt heads, alternate lamp heads are available, see Remote Lamp Heads spec West Parkside Lane Phoenix, AZ Fax:

29 Type EM2 August 28, 2014 Josh Fraigun Landreth, Inc 2250 Lucien Way Ste 110 Maitland, FL RE: CLAY SPRINGS ELEMENTARY ORANGE COUNTY FLORIDA Mr. Fraigun Barron Lighting Group would like to extend special warranty for the LL90HW-6N- 27-P-W-T06H12 for Clay Springs Elementary School in Orange County Florida. The warranty will be: Any component that fails due to manufacturer s defect is guaranteed for 5 years. This includes the warranty on the battery. The warranty does not cover physical damage, abuse or acts of God. If you have any questions or concerns regarding this warranty; please call me at or at mary.cerka@barronltg.com Best Regards, Mary Cerka Account Manager Barron Lighting Group

30 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-4' L4 Seem 4 LED trimless mud-in grid end detail corner detail regress lens wall to ceiling companion wall mount companion suspended companion DIMENSIONAL DATA trimless mud-in 5.53" 140.5mm hard surface 5.53" 140.5mm FEATURES Narrow extruded aluminum 4 aperture recessed slot LED. Integrates with ceiling or wall in a variety of mounting styles for a clean, unobtrusive aesthetic. Individual units and continuous runs in 1 increments. 4.88" 124.0mm 4.88" 124.0mm Continuous frosted acrylic lens provides uninterrupted illumination, without pixels or shadows. 4.00" 101.6mm 7.53" 191.3mm 4.00" 101.6mm 7.30" 185.4mm LED position and lens material optimized to provide the perfect blend of high performance and visual comfort. note: 0.375"min "max ceiling thickness note: 0.375"min "max ceiling thickness trim flange grid - regress lens shown PERFORMANCE 5.63" 143.0mm PRODUCT OVERVIEW Lumen Output: lm 5.00" 127.0mm 4.88" 124.0mm Wattage: 12-51W LPW: SDCM: " 101.6mm 5.30" 134.6mm 4.00" 102mm 5.00" 127mm Nominal output: 375 Lumens per foot Lumen Maintenance: 50,000hrs Delivered Lumens: 1459lm Total System Watts: 17W Photometric performance is measured in accordance with IESNA LM-79. Visit focalpointlights.com for complete photometric data. Focal Point LLC 4141 S. Pulaski Rd, Chicago, IL July 2014 D

31 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-4' L4 fixture: project: DETAILS Standard Patterns with 90 Corners L Patterns - A xb Overall Length A Overall Length B start Order: 8 x6 U Patterns - A xb xc Overall Length A Overall Length B start Order: 8 x6 x4 SPECIFICATIONS LED System Proprietary linear LED module incorporates premium LEDs on a robust platform to achieve excellent thermal management. LEDs are placed to promote a uniform appearance. Available in 3000K, 3500K or 4000K with CRI>80, 3SDCM. LED modules and drivers are replaceable from below. Construction One piece extruded aluminum housing. 20 Ga. steel end caps. Housing for new construction applications. XFW acceptable for use with wood, consult factory for Type IC availability. 2 unit weight: 18 lbs., 3 unit weight: 24 lbs., 4 unit weight: 30 lbs., 5 unit weight: 36 lbs. Optic Electrical Luminaires are pre wired with factory installed branch circuit wiring and over-molded quick connects. Standard V constant current driver includes 0-10V analog dimming. Dimming range 100% to 10%.Power factor >.9. Emergency battery: Bodine BSL310-CAN. Emergency output - 10 watts for 90 minutes. Labels UL and cul listed. Suitable for Dry or Damp Locations, indoor use only. Polyester powder coat applied over a 5-stage pre treatment. Lumen Maintenance L70 at 50,000 hours. Order: 6 x8 Warranty LED system rated for operation in ambient environments up to 25 C. 5 year limited warranty. PERFORMANCE CHART Shielding Regress Lens Regress High Performance C Overall Length B Overall Length Overall Length C start A Overall Length start B Overall Length Order: 8 x6 x4 Overall Length A Rectangular Patterns - A xb R Overall Length A Overall Length B start Order: 8 x6 R Ordering examples assume A=8, B=6 & C=4 Specify clockwise from start of run. Start of run is always at first specified run length. Nominal Output Tested Delivered System Watts Lumens *Based on 3500k, 4 lengths. *Lumen output may vary +/- 5%. Actual wattage may vary +/- 5% ORDERING Luminaire Series Seem 4 LED Shielding Regress Lens SR (ceiling applications only) Regress High Performance Lens SRXP (ceiling applications only) Nominal Output 250 Lumens per foot (L11 Driver only) 375 Lumens per foot (4' minimum) 625 Lumens per foot 875 Lumens per foot 1000 Lumens per foot Color Temperature 3000K 30K 3500K 35K 4000K 40K Circuit Single Circuit 1C Voltage 120 Volt Volt 277 UNV Volt UNV (Cannot be specified with EM option) Driver 0-10V - 1% Dimming L V - 10% Dimming LD1 Lutron A-Series - EcoSystem L3D (See Lutron driver reference) Ceiling Configuration Std. 15/16" Lay-in G1 Std. 15/16" Tegular T1 Std. 9/16" Lay-in G2 Std. 9/16" Tegular T2 9/16" Slot-tee Tegular G3 Tall 15/16" Lay-in G4 Tall 15/16" Tegular T4 Tall 9/16" Lay-in G5 Tall 9/16" Tegular T5 Node 9/16" Tegular T6 Mud-in Trimless, pre-set for 1/2" Drywall Mud-in Trimless, pre-set for 5/8" Drywall Mud-in Trimless, set thickness in field (Mounting equipment assembled in field) Non-Drywall Hard Surface Hard Surface, Wood Factory Options Chicago Plenum CP Emergency Circuit* EC Emergency Battery Pack* EM (4 lengths or longer, not available at corners) * Lutron EcoSystem 0-10V Interface TVI Finish Matte White Housing WH Luminaire Length (Leave blank for patterns. Lengths are nominal) Specify luminaire/row (Smaller increments available. Consult factory for details.) Pattern Options (3' minimum length) Rectangular pattern (Consult factory for other pattern options) FSM4L FL 875LF 35K 1C 277 L11 TF WH 4' Focal Point LLC reserves the right to change specifications for product improvement without notification. *For more information visit focalpointlights.com/reference or consult factory.

32 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-4' L4 Seem 4 LED - FLUSH LENS Lumens: 994lm Filename: FSM4LFL250LF35K.IES System Watts: 11.9W Test #: LPW: 83 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Angle Zonal Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data. Seem 4 LED - FLUSH LENS Lumens: 1459lm Filename: FSM4LFL375LF35K.IES System Watts: 17.0W Test #: LPW: 86 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Angle Zonal Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data.

33 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-4' L4 Seem 4 LED - FLUSH LENS Lumens: 2452lm Filename: FSM4LFL625LF35K.IES System Watts: 28.9W Test #: LPW: 84 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Zonal Angle Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data. Seem 4 LED - FLUSH LENS Lumens: 3444lm Filename: FSM4LFL875LF35K.IES System Watts: 43.0W Test #: LPW: 80 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Zonal Angle Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data.

34 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-4' L4 Seem 4 LED - FLUSH LENS Lumens: 3959lm Filename: FSM4LFL1000LF35K.IES System Watts: 51.0W Test #: LPW: 78 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Zonal Angle Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data.

35 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-4' L4 Seem 4 LED - REGRESS LENS Lumens: 1487lm Filename: FSM4LSR375LF35K.IES System Watts: 16.8W Test #: LPW: 88 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Angle Zonal Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data. Seem 4 LED - REGRESS HIGH PERFORMANCE LENS Lumens: 1495lm Filename: FSM4LSRXP375LF35K.IES System Watts: 15.5W Test #: LPW: 96 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Angle Zonal Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data.

36 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-8' L8 Seem 4 LED trimless mud-in grid end detail corner detail regress lens wall to ceiling companion wall mount companion suspended companion DIMENSIONAL DATA trimless mud-in 5.53" 140.5mm hard surface 5.53" 140.5mm FEATURES Narrow extruded aluminum 4 aperture recessed slot LED. Integrates with ceiling or wall in a variety of mounting styles for a clean, unobtrusive aesthetic. Individual units and continuous runs in 1 increments. 4.88" 124.0mm 4.88" 124.0mm Continuous frosted acrylic lens provides uninterrupted illumination, without pixels or shadows. 4.00" 101.6mm 7.53" 191.3mm 4.00" 101.6mm 7.30" 185.4mm LED position and lens material optimized to provide the perfect blend of high performance and visual comfort. note: 0.375"min "max ceiling thickness note: 0.375"min "max ceiling thickness trim flange grid - regress lens shown PERFORMANCE 5.63" 143.0mm PRODUCT OVERVIEW Lumen Output: lm 5.00" 127.0mm 4.88" 124.0mm Wattage: 12-51W LPW: SDCM: " 101.6mm 5.30" 134.6mm 4.00" 102mm 5.00" 127mm Nominal output: 375 Lumens per foot Lumen Maintenance: 50,000hrs Delivered Lumens: 1459lm Total System Watts: 17W Photometric performance is measured in accordance with IESNA LM-79. Visit focalpointlights.com for complete photometric data. Focal Point LLC 4141 S. Pulaski Rd, Chicago, IL July 2014 D

37 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-8' L8 fixture: project: DETAILS Standard Patterns with 90 Corners L Patterns - A xb Overall Length A Overall Length B start Order: 8 x6 U Patterns - A xb xc Overall Length A Overall Length B start Order: 8 x6 x4 SPECIFICATIONS LED System Proprietary linear LED module incorporates premium LEDs on a robust platform to achieve excellent thermal management. LEDs are placed to promote a uniform appearance. Available in 3000K, 3500K or 4000K with CRI>80, 3SDCM. LED modules and drivers are replaceable from below. Construction One piece extruded aluminum housing. 20 Ga. steel end caps. Housing for new construction applications. XFW acceptable for use with wood, consult factory for Type IC availability. 2 unit weight: 18 lbs., 3 unit weight: 24 lbs., 4 unit weight: 30 lbs., 5 unit weight: 36 lbs. Optic Electrical Luminaires are pre wired with factory installed branch circuit wiring and over-molded quick connects. Standard V constant current driver includes 0-10V analog dimming. Dimming range 100% to 10%.Power factor >.9. Emergency battery: Bodine BSL310-CAN. Emergency output - 10 watts for 90 minutes. Labels UL and cul listed. Suitable for Dry or Damp Locations, indoor use only. Polyester powder coat applied over a 5-stage pre treatment. Lumen Maintenance L70 at 50,000 hours. Order: 6 x8 Warranty LED system rated for operation in ambient environments up to 25 C. 5 year limited warranty. PERFORMANCE CHART Shielding Regress Lens Regress High Performance C Overall Length B Overall Length Overall Length C start A Overall Length start B Overall Length Order: 8 x6 x4 Overall Length A Rectangular Patterns - A xb R Overall Length A Overall Length B start Order: 8 x6 R Ordering examples assume A=8, B=6 & C=4 Specify clockwise from start of run. Start of run is always at first specified run length. Nominal Output Tested Delivered System Watts Lumens *Based on 3500k, 4 lengths. *Lumen output may vary +/- 5%. Actual wattage may vary +/- 5% ORDERING Luminaire Series Seem 4 LED Shielding Regress Lens SR (ceiling applications only) Regress High Performance Lens SRXP (ceiling applications only) Nominal Output 250 Lumens per foot (L11 Driver only) 375 Lumens per foot (4' minimum) 625 Lumens per foot 875 Lumens per foot 1000 Lumens per foot Color Temperature 3000K 30K 3500K 35K 4000K 40K Circuit Single Circuit 1C Voltage 120 Volt Volt 277 UNV Volt UNV (Cannot be specified with EM option) Driver 0-10V - 1% Dimming L V - 10% Dimming LD1 Lutron A-Series - EcoSystem L3D (See Lutron driver reference) Ceiling Configuration Std. 15/16" Lay-in G1 Std. 15/16" Tegular T1 Std. 9/16" Lay-in G2 Std. 9/16" Tegular T2 9/16" Slot-tee Tegular G3 Tall 15/16" Lay-in G4 Tall 15/16" Tegular T4 Tall 9/16" Lay-in G5 Tall 9/16" Tegular T5 Node 9/16" Tegular T6 Mud-in Trimless, pre-set for 1/2" Drywall Mud-in Trimless, pre-set for 5/8" Drywall Mud-in Trimless, set thickness in field (Mounting equipment assembled in field) Non-Drywall Hard Surface Hard Surface, Wood Factory Options Chicago Plenum CP Emergency Circuit* EC Emergency Battery Pack* EM (4 lengths or longer, not available at corners) * Lutron EcoSystem 0-10V Interface TVI Finish Matte White Housing WH Luminaire Length (Leave blank for patterns. Lengths are nominal) Specify luminaire/row (Smaller increments available. Consult factory for details.) Pattern Options (3' minimum length) Rectangular pattern (Consult factory for other pattern options) FSM4L FL 875LF 35K 1C 277 L11 TF WH 8' Focal Point LLC reserves the right to change specifications for product improvement without notification. *For more information visit focalpointlights.com/reference or consult factory.

38 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-8' L8 Seem 4 LED - FLUSH LENS Lumens: 994lm Filename: FSM4LFL250LF35K.IES System Watts: 11.9W Test #: LPW: 83 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Angle Zonal Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data. Seem 4 LED - FLUSH LENS Lumens: 1459lm Filename: FSM4LFL375LF35K.IES System Watts: 17.0W Test #: LPW: 86 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Angle Zonal Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data.

39 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-8' L8 Seem 4 LED - FLUSH LENS Lumens: 2452lm Filename: FSM4LFL625LF35K.IES System Watts: 28.9W Test #: LPW: 84 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Zonal Angle Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data. Seem 4 LED - FLUSH LENS Lumens: 3444lm Filename: FSM4LFL875LF35K.IES System Watts: 43.0W Test #: LPW: 80 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Zonal Angle Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data.

40 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-8' L8 Seem 4 LED - FLUSH LENS Lumens: 3959lm Filename: FSM4LFL1000LF35K.IES System Watts: 51.0W Test #: LPW: 78 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Zonal Angle Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data.

41 FSM4L-FL-875LF-35K-L11-1C-277- TF-WH-8' L8 Seem 4 LED - REGRESS LENS Lumens: 1487lm Filename: FSM4LSR375LF35K.IES System Watts: 16.8W Test #: LPW: 88 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Angle Zonal Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data. Seem 4 LED - REGRESS HIGH PERFORMANCE LENS Lumens: 1495lm Filename: FSM4LSRXP375LF35K.IES System Watts: 15.5W Test #: LPW: 96 CANDELPOWER DISTRIBUTION LUMEN SUMMARY Vertical Horizontal Angle Angle Zonal Lumens Zone Lumens % Fixture Total Luminaire LUMINANCE DATA (CD/M 2 ) Vertical Angle Go to for additional photometric data.

42 Type MSL4 - #L400D-ECL400 User s Manual for S and L series Fluorescent Lights. The Visual Professionals

43 Note: Thank you for purchasing our ikan Fluorescent lights. We know you will be satisfied with our S and our L series lights. Please visit for more information on our future products including monitors, stands and light accessories. Getting Started Box Includes: 55w Bulbs Reflectors Corners Stand Mount Power Cord Step by Step 1. Carefully remove light from the packaging. 2. If the bulbs were not already installed proceed to install them now. (Please refer to figure 1) 3. Remove the blue protective film from the barn doors. (Please refer to figure 2) 4. Install stand mount on the bottom of the yoke. Use a wrench to properly tighten it. (Please refer to figure 3 and 4) 5. Attach the reflector corners to the Velcro strips on the outer edge of the barndoors. (Please refer to figure 5 and 6) 1.

44 Step by Step continued Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 2.

45 3. Note: The DM dimmer only applies to the D model Fluorescent light series. DMX Dimmer DMX-512 Operating Instructions 1. Channel Setting ress and hold the DM button so the.e.d. display shows d001. nder this mode you can press the p or Down button to change the channel. Ex :d001 for channel No. 1 d002 for channel No. 2 The max number of channels you can have is 12. This means you can control up to 12 lights. 2. Dimming Function When the.e.d. display shows d001 or 00 you can press the or Down button to ad ust the brightness of the light. The display will toggle between 00 to F. F refers to Full ower 00 - refers to the amount brightness When you press the p button the light gets brighter. When you press the Down button the light gets dimmer. 3. Time Delayed Off Switch You can press the F key to ad ust for a time delay when the power is turned off. When the display shows A.0.01 it means that after you turn the power off it will wait 1 second before shutting off the lights. The p key extends the time and the Down key decreases the time. Ex. A.0.1 means the light will turn off 1 seconds after the power switch was turned off. seconds is the maximum delay. Display F Up Function D DMX F D IN OUT Down IN OUT

46 Digital Dimmer Models Display Up Down Description: When the power switch is on all the lamps will power on. If you want to dim the light then press the up or down key to ad ust the brightness. The display will toggle between 00 to F. F refers to Full ower 00 - refers to the amount brightness When you press the p button the light gets brighter. When you press the Down button the light gets dimmer. Features All ikan fluorescent lights feature: - K flicker free frequency - ightweight but durable aluminum construction - eight ad ustable yoke - ush button dimming - pin DM - 12 models available - Integrated egg crate filter channel - Built in Ballast - Bulbs and barndoor intensifiers included 4.

47 FAQS Q: What color temperature bulbs are included with the lights? A: 3000K Q: Are Different color Temperature bulbs available? A: Yes, you can order different temperature bulbs thought ikan Corp Q: Can you mix and match different color temperature bulbs with the ikan fluorescent lights? A: Yes. Q: Are the bulbs proprietary A: No, the bulbs are industry standard bulbs. Bulbs available from many manufactures ex: General Electric Warranty Ikan products are engineered with you in mind for a trouble free performance and a productive product life. For your assurance, product warranties on all parts are available for all ikan products against defective material or workmanship. In case of a defect within the one year warranty period please contact the ikan Corporation for an RMA# and a speedy replacement for your ikan product. Note: For any additional questions please call ikan customers service or to info@ikancorp.com. 5.

48 Optional Accessories Hard Cases Soft Cases DMX Box Light Stands Stage Clamps Iron Casting C Clamps Safety Wires Gel Frames Egg Crates Note: For any additional information on these accessories please visit our website or call us at

49 Stoney Brook Dr. Houston, TX Phone : Fax : info@ikancorp.com

50 68-02-IWF-01-OG-11 M2 Fixture #: Job Title: 150W Non-Metallic Incandescent Vaporproof Fixture Ceiling Mount Wall Mount Construction Both the housing and the guard are made with LEXAN polycarbonate. It is corrosion and UV resistant. All screws and inserts are brass. Gaskets are long life silicone. Colors Stone Gray, Midnight Black. Lamp and Lampholder The fixture accepts any manufacturer s A-21 lamp, with a medium base ceramic lampholder. Lamp not included. Installation The ceiling box has four 3/4" threaded hubs with liquid tight knockouts. Internal grounding system allows for hub to hub grounding continuity when using rigid or intermediate metallic conduit (lock nuts required). Two mounting feet are spaced at 5¼". Use minimum C rated lead wires (105 C for Hazardous Locations). Pendant mount fixtures have a single 3/4" threaded hub with a locking set screw. UL Restrictions All luminaires for use in Hazardous Locations must use heat-treated globes. All fixtures to be 75 Watts Compliances Fixtures Incandescent Surface Mounted For use in Wet Locations Maximum, when using Polycarbonate Globes, 60 Watts Maximum for Color Glass Globes with or without Reflectors. Canadian Standards International (CSA) Fixtures enclosed and gasketed incandescent (150 Watts), ceiling and wall surface mounted. Certified in compliance with CSA STD C22.2 No Other Approvals NEMA 4X New York City Department of Buildings United States Coast Guard (USCG) Canadian Coast Guard (CCG) Listed in compliance with UL 1598A to 150 Watts. File number E Pendant Mount Canplas Industries Ltd. Box 1800 Barrie, Ontario, Canada L4M 4V Fax (705) Website: ISO 9001 Registered Quality Management System Luminaires, Miscellaneous Marine. Incandescent (150 Watts). Luminaires For Use in Hazardous Locations. Incandescent (150 Watts). Class 1 Div 2 Groups A, B, C&D Class 1 Div 2 Groups F&G Listed in compliance with UL 1598A. File number Listed in compliance with UL 1598A. File number Also listed for Canada with cul mark. Incandescent (T2B) Incandescent (T2B) at 40 C For part number and pricing, go to the Canlet U.S./CDA Price List.

51 68-02-IWF-01-OG-11 M2 PHOTOMETRIC DATA Canlet Non-Metallic Incandescent Fixture with Clear Glass Globe and Guard One 150W/120V Coated Incandescent Lamp Lumen Rating = 2500 LMS. Coefficients of Utilization - Zonal Cavity Method % Effective Floor Cavity Reflectance =.20 rcc % Wall Reflectance rw Room Cavity Ratio RCR 20% Effective Floor Cavity Reflectance Luminance Summary - CD/SQ. M. Angle Mean CD/SQ. M Tested According to IES Procedures. Test Distance meters (26.0 ft.) Zonal Lumens and Percentages Zone Lumens % Lamp % Luminaire Efficiency = 74.8% with guard S/MH = 1.6 SC = 1.6 = 97.9% without guard Tested by Lighting Sciences in accordance with current IES published procedures. Test Report Number LSC 3068 Complete reports available upon request. VPF-150W PRINTED IN CANADA The specifications included in this brochure are correct as of time of printing. However, Canlet reserves the right to make product improvements at their discretion.

52 68-02-IWF-01-OG-11 M2 BUILDING A PART NUMBER To build a part number, use the following steps. STEP 1 Select Product Line, Option Code (Fixture Color), Lamp Type (Incandescent or Fluorescent) and Mounting Type (Ceiling, Wall, Pendant and Retrofit). STEP 2 Select Wattage, Power Factor (if fluorescent) and Voltage. STEP 3 Select Fixture to be supplied with: Guard Only, No Guard, Guard with a Standard Reflector or DEEP Reflector. STEP 4 Select Globe by Size, Color and Material (Glass, Heat-Treated Glass, or Polycarbonate). STEP 5 Select Adder/Options: Wall Mounted Fixtures with a reflector require a wall mount extension bracket. STEP 6 Create Fixture Part Number. For Detailed product information refer to the Canlet web site STEP 1 INCANDESCENT or COMPACT FLUORESCENT BASE PRODUCT SELECT: PRODUCT LINE, OPTION CODE (FIXTURE COLOR), INCANDESCENT OR FLUORESCENT CODE. PRODUCT LINE OPTION CODE COLOR DESCRIPTION INCAN FLUOR Image CEILING MOUNT Bright Arctic White ICF FCF Stone Gray ICF FCF Midnight Black ICF FCF Fire Engine Red ICF FCF Dark Navy Blue ICF FCF Deep Forest Green ICF FCF Canary Yellow ICF FCF CEILING RETROFIT Includes a retrofit ring for use with a 3 ½ or 4 outlet box Bright Arctic White ICR FCR Stone Gray ICR FCR Midnight Black ICR FCR Fire Engine Red ICR FCR Dark Navy Blue ICR FCR Deep Forest Green ICR FCR Canary Yellow ICR FCR WALL MOUNT Extension Bracket must be ordered for use with reflector. See Step Bright Arctic White IWF FWF Stone Gray IWF FWF Midnight Black IWF FWF Fire Engine Red IWF FWF Dark Navy Blue IWF FWF Deep Forest Green IWF FWF Canary Yellow IWF FWF WALL RETROFIT Includes a metal strap to adapt to a recessed 3 ½ or 4 outlet box Bright Arctic White IWR FWR Stone Gray IWR FWR Midnight Black IWR FWR Fire Engine Red IWR FWR Dark Navy Blue IWR FWR Deep Forest Green IWR FWR Canary Yellow IWR FWR PENDANT MOUNT Bright Arctic White IPF FPF Stone Gray IPF FPF Midnight Black IPF FPF Fire Engine Red IPF FPF Dark Navy Blue IPF FPF Deep Forest Green IPF FPF Canary Yellow IPF FPF Incandescent Compact Fluorescent Compact Fluorescent Incandescent STEP 2 WATTAGE, POWER FACTOR and VOLTAGE SELECT ONE OPTION CODE Option Code WATTS Pwr Factor VOLTS max. Incan N/A N/A High 120V Normal 277V Normal 120V High 120V Normal 277V High 120V High 277V High 120V High 277V STEP 3 GUARD ONLY, NO GUARD, GUARD WITH REFLECTOR SELECT ONE OPTION CODE OPTION CODE DESCRIPTION OG Guard only 00 No Guard 01 Guard w/white Reflector 02 Guard w/frosted White Reflector 04 Guard w/red Reflector 05 Guard w/blue Reflector 06 Guard w/green Reflector 07 Guard w/amber Reflector 09 Guard w/clear Reflector 11 Guard w/deep White Reflector 12 Guard w/deep Frosted White Reflector 14 Guard w/deep Red Reflector 15 Guard w/deep Blue Reflector 16 Guard w/deep Green Reflector 17 Guard w/deep Amber Reflector 19 Guard w/deep Clear Reflector Reflectors are compatible with Guards and Glass Globes only. Guards are compatible with Glass Globes only

53 68-02-IWF-01-OG-11 M2 BUILDING A PART NUMBER To build a part number, use the following steps.(cont d) STEP 4 GLOBES SELECT ONE OPTION CODE OPTION CODE TYPE GLOBE STANDARD GLASS GLOBES 01 Standard Opal 09 Standard Clear 29 Prismatic Clear HEAT-TREATED GLASS GLOBES *Class-rated fixtures require Heat-Treated globes. 11 Heat-Treated Clear 14 Heat-Treated Red 15 Heat-Treated Blue 16 Heat-Treated Green 17 Heat-Treated Amber POLYCARBONATE GLOBES 34 Prismatic Large Red 35 Prismatic Large Blue 36 Prismatic Large Green 37 Prismatic Large Amber 39 Prismatic Large Clear 44 Prismatic Small (13W only) Red 45 Prismatic Small (13W only) Blue 46 Prismatic Small (13W only) Green 47 Prismatic Small (13W only) Amber 49 Prismatic Small (13W only) Clear 59 Smooth Large Clear 69 Smooth Small (13W only) Clear STEP 5 ADD -ON OPTIONS PART NUMBER(S) ARE TO BE ORDERED SEPARATELY FROM THE BASE FIXTURE. DESCRIPTION PART # COLOR WALL MOUNT EXTENSION BRACKET* * Wall Mount extension Bracket must be added when ordering a Wall Mount Fixture with a reflector 68WME01 68WME02 68WME03 68WME04 68WME05 68WME06 68WME07 Bright Arctic White Stone Gray Midnight Black Fire Engine Red Dark Navy Blue Deep Forest Green Canary Yellow Maximum 75W incandescent lamp with Polycarbonate Globes Maximum 60W incandescent lamp with color glass globes with or without reflectors Lamps are not included in fixture pricing. must be ordered separate Halogen lamps are not to be used with Non-Metallic Vaporproof Fixtures Globes can be ordered with a Fixture using the Option Code or separately by Part Number STEP 6 BUILDING A PART NUMBER Complete the worksheet below by inserting the Code or Part # Step 1 Base Product Step 2 Wattage,Volt & Power Factor Step 3 Guard / Reflector Step 4 Globes Step 5 Add-on Options Description Option Code or Part #

54 SVR-232T8-277V-ISN-GLR P2 SVR Series TM Project Name: Catalog #: Date: Description: (1-light, nom. 4 only) 7/8 KO 4-3/4 4-7/8 (2 or 3-light, nom. 2 or 4 ) 3-1/4 9-1/2 Length Wattage 27 14T5, 24T5HO, 17T T5, 54T5HO, 32T8 The Nulite SVR series is a vandal resistant low profile surface mounted lensed luminaire. The polycarbonate prismatic / ribbed lens will hold up to high traffic and vandal applications. Specifications: Construction: Housing is die formed of 20 gauge cold rolled steel. Housing is finished with baked white enamel paint. Clear polycarbonate lens features pyramidal prism bottom and vertical ribbed perimeter provides maximum light control and efficiency. Lens is secured with tamper resistant spanner head screws. Reflector / Ballast: Ballast cover/pan is formed and finished with high reflectance white paint. Standard electronic, Class P, ballast. Universal (UNV) voltage ballast is from 120 to 277V. Lamping: 1, 2 or 3 lamp cross-section T5, T5HO or T8. Luminaire can be ordered with lamps, consult factory. Mounting: Surface. Labels: UL / cul listed for Damp location. Wet location is optional. Ordering Information Sample: SVR-232T8-UNV-ISN-WL Series Lamp Wattage Voltage Ballast Options SVR 2 32T8 277 IS N GLR 1 1 T8 Options Ballast Factor 14T5 UNV EM 4 Emergency Battery Pack IS (Standard) N Normal (Standard) 2 24T5HO Instant Start T8 PS L Low WL Wet Location 277 Program Start 28T HEIS H High High Efficiency GLR Fusing 54T5HO Instant Start 32T8 HEPS High Efficiency Program Start T5/T5HO PS (Standard) Program Start HEPS 3 High Efficiency Program Start Ballast Factor N Normal All Lamp Dimming Options DIM 3 Dimming SD 3 Step Dimming 1. 1-Lamp cross-section is only available in nominal 4 length Lamp cross-section is only available for 32W T8. 3. Consult factory. 4. Specific voltage must be ordered for this option. Consult factory for nominal 2 units. Specifications and dimensions are subject to change without notification. Specification sheets on our website supersede all other versions Rev. B Nulite reserves the right to bulk package any order. Nulite Lighting East 51st Avenue, Denver, CO Phone Fax

55 SVR-232T8-277V-ISN-GLR P2 TM SVR Series Page 2 Plan view of KOs on back of housing /2 4-7/8 7/8 KO 2 KO /8 9-1/ /2 9-1/2 Specifications and dimensions are subject to change without notification. Nulite Lighting East 51st Avenue, Denver, CO Phone Fax

56 Type P3 - #WMA DL1U ARCHITECTURAL WALL MOUNT SUBMITTAL: WMA T8 JOB: TYPE: Clay Springs ES P3 VOLTAGE: EXAMPLE WMA A - OPTIONS - EB2 - UNV SERIES NOMINAL TOTAL WATTAGE/ SHIELDING OPTIONS BALLAST VOLTAGE LENGTH LAMPS TYPE TYPE FEATURES Available in various uplight, downlight, closed-top, and divided lamp options. Coutoured architectural housing with die-cast aluminum end caps. Pull switch and grounded convenience outlet options available (120V only). Various housing color options available, consult factory. Tool-less access to lamps by removing front housing from fixture channel. Keyhole mounting for easy installation. Optional tamper-resistant screws available. Optional anti-microbial white finish available for use in healthcare applications. This fixture is proudly made in the USA ORDERING INFORMATION SERIES WMA NOMINAL LENGTH TOTAL LAMPS 1, 2, or 3 LAMP WATTAGE/TYPE 2 LAMP OPTIONS 17 2, 17-watt T8 3 LAMP OPTIONS 25 3, 25-watt T8 4 LAMP OPTIONS 32 4, 32-watt T8 SHIELDING A AF Architectural Wall Mount T8 4 4 Acrylic, pattern #12,.125 thick Frosted acrylic,.125 thick OPTIONS See back for option details. For generic EM ballast options (must specify voltage), see Information section. For color options, visit the WMA at hewilliams.com. PSR/120 1, 2 Single-circuit pull switch on right 1, 2 PS2R/120 1 Two-circuit, 4-position pull switch on right (requires two ballasts per fixture 1 PSL/120 1, 2 Single-circuit pull switch on left 1, 2 PS2L/120 1 Two-circuit, 4-position pull switch on left (requires two ballasts per fixture) 1 GCOL 1 Grounded convenience outlet on left 1 H.E. Williams, Inc. Carthage, Missouri Fax: June 6, /2 Shown with 1 lamp 5-3/4 Shown with 2 lamps Shown with 3 lamps This configuration not available with occupancy sensor. OPTIONS (Continued) GCOR 1 Grounded convenience outlet on right 1 DL 2, 3 Divided light with one lamp up, one lamp down (2-lamp fixture only, requires two ballasts) 2, 3 DL1U 2, 3 Divided light with one lamp up (3-lamp fixture only, requires two ballasts) 2, 3 DL2U 2, 3 Divided light with two lamps up (3-lamp fixture only, requires two ballasts) 2, 3 CT Closed-top TP 4 Tamper-resistant (holt head) screws 4 LVC*C60_ 5, 6 Curbell model #LC-060 low-voltage controller, specify U (Uplight), D (Downlight), or UD (Uplight and Downlight), 120V or 277V only 5, 6 AMW Anti-microbial white finish OCCUPANCY SENSORS 3, 5 Factory-installed occupancy sensor, 120V or 277V only, must specify voltage: OCCWS FS-505-PP- 3, 5 BALLAST TYPE For complete ballast offering, see Information section. EB1 1-lamp electronic ballast EB2 2-lamp electronic ballast EB3 3-lamp electronic ballast EB1/1 (2) 1-lamp electronic ballasts EB2/1 (1) 2-lamp and (1) 1-lamp electronic ballast VOLTAGE V V UNV V V SPECIFICATIONS Housing 20-gauge C.R.S. fixture channel. Front housing constructed of marine grade extruded aluminum with die-cast aluminum end caps. Reflective Surfaces 92% minimum average reflective white polyester powder coat on interior steel components. Shielding Acrylic,.125 thick, pattern #12 or frosted. Finish Textured matte white polyester TGIC powder coat bonded to phosphate-free, multi-stage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. Electrical Electronic ballast standard, instant start T8, rated Class P. Mounting Wall. Labels UL/CUL listed as fluorescent luminaire suitable for dry or damp locations V only. When divided light unit is equipped with single-circuit pull switch (PSR/120 or PSL/120), pull switch operates the down light. When divided light unit is equipped with occupancy sensor, sensor operates the down light. This option requires a tamperresistant tool (must be ordered separately). Please specify quantity required per project. LVC and OCC options cannot be used simultaneously on 2 and 3 units. LVC*C60 option requires 120V or 277V. Not dimming compatible. Wall Wash/Mount Page 10A

57 WMA T8 PHOTOMETRY INFORMATION TEST REPORT INFORMATION Test Report #: Date: 04/23/08 Lamp F32T8/835 Lamp Quantity: LUMEN SUMMARY Zone Lumens % Lamp % Fixture Total Luminaire: Total Luminaire Optical Efficiency: 72.8% ARCHITECTURAL WALL MOUNT CANDLEPOWER DISTRIBUTION Vertical Horizontal Angle Angle Catalog #: WMA A Zonal Lumens 0º 45º 90º 135º 180º 0º º º º º º º º º º º º º º º º º º º º º ZONAL CAVITY COEFFICIENTS Ceiling Wall Effective Floor Cavity Reflectance =.20 Room Cavity Ratio DIVIDED LIGHT OPTION DETAILS Shown with DL FIXTURE DETAILS BACK VIEW (4) Keyholes (2) 7/8 KOs A B C 2 KOs (3 and 4 fixtures only) Nominal Dimensions Length A B C 2 Unit 25-1/8 O.C. 20-1/2 O.C. 16 O.C. 3 Unit 37-1/8 O.C. 32-1/2 O.C. 32 O.C. 4 Unit 49-1/8 O.C. 42-1/2 O.C. 32 O.C. OCCUPANCY SENSOR DETAIL Shown with DL1U OCCWS FS-505-PP- Shown with DL2U Wall Wash/Mount Page 10B H.E. Williams, Inc. Carthage, Missouri Fax: Information contained herein is subject to change without notice. HEWJP59448RJ REV10/15/13

58 NTEK412-B TL1212 NTEK/NHTEK 2-Circuit/2-Neutral 120V and 277V Series Track Catalog No. Type Specifications/Features Project Track Ideal for dimming intensive applications. Independent neutrals guarantee that the two circuits are completely isolated, eliminating cross-circuit interference and enable greater power capacity (2 x 20A) than common neutral track. Superior dimming capability gives the ability to dim on two independent circuits without harmonics or interference on the neutral conductor. Oversized conductors for higher operating safety and reduced overload potential. Secure Bus Bar Insulation secured both conductors and insulation for the life of the product. Separate mechanical suspension points provide superior weight bearing capacity, ensure electrical contact integrity and reduce the likelihood of arcing. Polarity ridge takes the guesswork out of connector and track alignment during installation. Made of architechtural grade extruded aluminum. Can be field cut to desired length. Low profile, easy and flexible. For 120V track, fixture adapter NTEK70 must be ordered separately. For 277V Track, fixture adapter must be factory installed. 1-1/4" 1-1/4" Warranty Track is covered by Con-Tech s one (1) year full replacement guarantee after date of purchase. Track Section Listing culus listed. 1/2" 2-5/32" 1-1/4" Recessed Track Jacket Section 1-5/16" Ordering Information 2-7/32" Example Order: NTEK44 P NFTP44 P Track Sections Track Finish Recessed Track Jacket Sections Jacket Finish NTEK412 B NTEK44-4' (48") Length 120V Track NTEK48-8' (96") Length 120V Track NTEK412-12' (144") Length 120V Track NHTEK44-4' (48") Length 277V Track NHTEK48-8' (96") Length 277V Track NHTEK412-12' (144") Length 277V Track B - Black P - White S - Silver NFTP44-4' (48") Length; 51-1/2" Actual Length NFTP48-8' (96") Length; 92-1/2" Actual Length NFTP412-12' (144") Length; 147-1/2" Actual Length B - Black P - White Please Recycle All specifications subject to change without notice.

59 NTEK11-B TL1212 NTEK/NHTEK 2-Circuit/2-Neutral Track Installation Accessories 120V and 277V Series Catalog No. Type Project 2-1/2" Live End Feeds Linear Coupler 3-1/4" NTEK11-B NTEK11-(B,P,S) 120V NHTEK11-(B,P,S) 277V Live End Feed NTEK12-(B,P,S) 120V NHTEK12-(B,P,S) 277V Live End Feed, Reverse Polarity NTEK21-(B,P,S) Dead Ends Live Middle Feed NTEK41-(B,P,S) Recessed End Cap 2-1/2" 5" NTEK14-(B,P,S) 120V NHTEK14-(B,P,S) 277V Feedable L-Connector NFTP41-U For safe, flush mounting applications. Natural galvanized steel. 2-1/2" Outlet Box Cover 3" NTEK34-(B,P,S) 120V NHTEK34-(B,P,S) 277V Adjustable Polarity NGES-(B,P,S) 3" Feedable T-Connectors 120V Fixture Adapter 2-1/2" 5" NTEK39-(B,P,S) 120V NHTEK39-(B,P,S) 277V Feedable T-Connector, Adj. Right Polarity NTEK40-(B,P,S) 120V NHTEK40-(B,P,S) 277V Feedable T-Connector, Adj. Left Polarity NTEK70-(B,P,S) Switchable between circuits and on/off. Track Length and Field Cutting Tool 2-1/2" Feedable X-Connector NXTSV12 All-in-one hand tool, bends conductors to manufacturer specifications and includes gauge to verify correcdt length. 5" NTEK38-(B,P,S) 120V NHTEK38-(B,P,S) 277V Stem Kits 2" 2" Adjustable Connector NTEK24-(B,P,S) NSPUS12-(B,P) 12" Stem NSPUS18-(B,P) 18" Stem NSPUS24-(B,P) 24" Stem NSPUS48-(B,P) 48" Stem Includes stem and canopy Please Recycle All specifications subject to change without notice.

60 NTEK41-B TL1212 NTEK/NHTEK 2-Circuit/2-Neutral Track Installation Accessories 120V and 277V Series Catalog No. Type Project 2-1/2" Live End Feeds Linear Coupler 3-1/4" NTEK11-(B,P,S) 120V NHTEK11-(B,P,S) 277V Live End Feed NTEK12-(B,P,S) 120V NHTEK12-(B,P,S) 277V Live End Feed, Reverse Polarity NTEK21-(B,P,S) Dead Ends NTEK41-B Live Middle Feed NTEK41-(B,P,S) Recessed End Cap 2-1/2" 5" NTEK14-(B,P,S) 120V NHTEK14-(B,P,S) 277V Feedable L-Connector NFTP41-U For safe, flush mounting applications. Natural galvanized steel. 2-1/2" Outlet Box Cover 3" NTEK34-(B,P,S) 120V NHTEK34-(B,P,S) 277V Adjustable Polarity NGES-(B,P,S) 3" Feedable T-Connectors 120V Fixture Adapter 2-1/2" 5" NTEK39-(B,P,S) 120V NHTEK39-(B,P,S) 277V Feedable T-Connector, Adj. Right Polarity NTEK40-(B,P,S) 120V NHTEK40-(B,P,S) 277V Feedable T-Connector, Adj. Left Polarity NTEK70-(B,P,S) Switchable between circuits and on/off. Track Length and Field Cutting Tool 2-1/2" Feedable X-Connector NXTSV12 All-in-one hand tool, bends conductors to manufacturer specifications and includes gauge to verify correcdt length. 5" NTEK38-(B,P,S) 120V NHTEK38-(B,P,S) 277V Stem Kits 2" 2" Adjustable Connector NTEK24-(B,P,S) NSPUS12-(B,P) 12" Stem NSPUS18-(B,P) 18" Stem NSPUS24-(B,P) 24" Stem NSPUS48-(B,P) 48" Stem Includes stem and canopy Please Recycle All specifications subject to change without notice.

61 NGES15-B TL1212 NTEK/NHTEK 2-Circuit/2-Neutral Track Installation Accessories 120V and 277V Series Catalog No. Type Project 2-1/2" Live End Feeds Linear Coupler 3-1/4" NTEK11-(B,P,S) 120V NHTEK11-(B,P,S) 277V Live End Feed NTEK12-(B,P,S) 120V NHTEK12-(B,P,S) 277V Live End Feed, Reverse Polarity NTEK21-(B,P,S) Dead Ends Live Middle Feed NTEK41-(B,P,S) Recessed End Cap 2-1/2" 5" NTEK14-(B,P,S) 120V NHTEK14-(B,P,S) 277V Feedable L-Connector NFTP41-U For safe, flush mounting applications. Natural galvanized steel. 2-1/2" Outlet Box Cover 3" NTEK34-(B,P,S) 120V NHTEK34-(B,P,S) 277V Adjustable Polarity NGES-(B,P,S) NGES15-B 3" Feedable T-Connectors 120V Fixture Adapter 2-1/2" 5" NTEK39-(B,P,S) 120V NHTEK39-(B,P,S) 277V Feedable T-Connector, Adj. Right Polarity NTEK40-(B,P,S) 120V NHTEK40-(B,P,S) 277V Feedable T-Connector, Adj. Left Polarity NTEK70-(B,P,S) Switchable between circuits and on/off. Track Length and Field Cutting Tool 2-1/2" Feedable X-Connector NXTSV12 All-in-one hand tool, bends conductors to manufacturer specifications and includes gauge to verify correcdt length. 5" NTEK38-(B,P,S) 120V NHTEK38-(B,P,S) 277V Stem Kits 2" 2" Adjustable Connector NTEK24-(B,P,S) NSPUS12-(B,P) 12" Stem NSPUS18-(B,P) 18" Stem NSPUS24-(B,P) 24" Stem NSPUS48-(B,P) 48" Stem Includes stem and canopy Please Recycle All specifications subject to change without notice.

62 CTL340-B TL1212 CTL320 CTL330 CTL340 Catalog # Type Project Elite Step Cylinder Track Fixtures C DIMENSIONS Model A B C CTL /2" 3 7 /8" 9 3 /4" CTL /8" 4 7 /16" 10 3 /4" CTL /4" 5 3 /4" 12" B A Specifications/Features Fixture Contemporary step-back styling of these models present a discrete appearance for home or office settings. The deep black phenolic baffle conceals the lamp and provides excellent cut-off and glare control. Lamp/Electrical CTL320 Lamp: (1) 50W PAR20 (max), (1) 75W R20 (max) CTL330 Lamp: (1) 75W PAR30L (max), (1) 100W A19 (max) or (1) 65W BR30 (max) CTL340 Lamp: (1) 150W PAR38 (max), (1) 120W BR40 (max) Ordering Information Example Order: CTL330 P LF-30-A Long neck PAR30 halogen lamp is recommended for CTL330. All styles are equipped with a convenient on/off switch and polarity indicator. Warranty This fixture is covered by Con-Tech s full replacement guarantee which is effective for one year. Listing cul us listed. Suitable for dry locations. Housing Finish Accessories CTL340 B CTL320 CTL330 CTL340 P - White B - Black PB - Polished Brass* *Polished Brass finish is only available for CTL320 and CTL330. BAFFLE WHT White Baffle FA-20 - Accessory Holder for PAR20 LF20-A - Tempered Amber Glass Filter LF20-B - Tempered Blue Glass Filter LF20-G - Tempered Green Glass Filter LF20-LB - Tempered LT. Blue Glass Filter LF20-LS - Tempered Linear Spread Lens LF20-R - Tempered Red Glass Filter LF20-UV - Tempered Optivex UV Filter LF Tempered Spread Lens BAFFLE WHT White Baffle FA-30 - Accessory Holder for PAR30 LF30-A - Tempered Amber Glass Filter LF30-B - Tempered Blue Glass Filter LF30-G - Tempered Green Glass Filter LF30-LB - Tempered LT. Blue Glass Filter LF30-LS - Tempered Linear Spread Lens LF30-R - Tempered Red Glass Filter LF30-RO - Tempered Rose Glass Filter LF30-UV - Tempered Optivex UV Filter LF Tempered Spread Lens FA-40 - Accessory Holder for PAR38 LF40-A - Tempered Amber Glass Filter LF40-B - Tempered Blue Glass Filter LF40-G - Tempered Green Glass Filter LF40-LB - Tempered LT. Blue Glass Filter LF40-LS - Tempered Linear Spread Lens LF40-R - Tempered Red Glass Filter LF40-RO - Tempered Rose Glass Filter LF Tempered Corning Glass Filter LF40-UV - Tempered Optivex UV Filter All specifications subject to change without notice AD04TRSS05

63 NTEK70-B TL1212 NTEK/NHTEK 2-Circuit/2-Neutral Track Installation Accessories 120V and 277V Series Catalog No. Type Project 2-1/2" Live End Feeds Linear Coupler 3-1/4" NTEK11-(B,P,S) 120V NHTEK11-(B,P,S) 277V Live End Feed NTEK12-(B,P,S) 120V NHTEK12-(B,P,S) 277V Live End Feed, Reverse Polarity NTEK21-(B,P,S) Dead Ends Live Middle Feed NTEK41-(B,P,S) Recessed End Cap 2-1/2" 5" NTEK14-(B,P,S) 120V NHTEK14-(B,P,S) 277V Feedable L-Connector NFTP41-U For safe, flush mounting applications. Natural galvanized steel. 2-1/2" Outlet Box Cover 3" NTEK34-(B,P,S) 120V NHTEK34-(B,P,S) 277V Adjustable Polarity NGES-(B,P,S) 3" Feedable T-Connectors 120V Fixture Adapter 2-1/2" NTEK70-B 5" NTEK39-(B,P,S) 120V NHTEK39-(B,P,S) 277V Feedable T-Connector, Adj. Right Polarity NTEK40-(B,P,S) 120V NHTEK40-(B,P,S) 277V Feedable T-Connector, Adj. Left Polarity NTEK70-(B,P,S) Switchable between circuits and on/off. Track Length and Field Cutting Tool 2-1/2" Feedable X-Connector NXTSV12 All-in-one hand tool, bends conductors to manufacturer specifications and includes gauge to verify correcdt length. 5" NTEK38-(B,P,S) 120V NHTEK38-(B,P,S) 277V Stem Kits 2" 2" Adjustable Connector NTEK24-(B,P,S) NSPUS12-(B,P) 12" Stem NSPUS18-(B,P) 18" Stem NSPUS24-(B,P) 24" Stem NSPUS48-(B,P) 48" Stem Includes stem and canopy Please Recycle All specifications subject to change without notice.

64 BD40 TL1212 Line Voltage Incandescent Track Fixture Accessories Catalog No. Type Project Front Lens Mounting Clips Black, set of 3. Honeycomb Louvers FA-28 - For CTL2820 and CTL2830 FA For CTL2838 FA-37 - For LA620/6020 FA-37A - ForLA630/6030 FA-37B - For LA6838/6038 FA-38 - For CTL830 and CTL838/2 FA For CTL9020 (Set of 4) LA-34 - For CTL820N, fits inside gimbal ring LA-35 - For use with FAH-16 LA-36 - For CTL830, no accessory holder required. Accessory Holders Egg Crate Louvers FAH-16 - For PAR16 fixtures CTL2116 and CTL2216 FA-20 - For CTL120, CTL2120, CTL220, CTL2220, CTL520 and CTL8020 FA-30 - For CT130, CTL230, CTL330, CTL530, CTL600, CTL2130, CTL2230, CTL5030, and CTL8030 FA-40 - For CTL140, CTL240, CTL340, CTL540, CTL600/LA-40, CTL2140, CTL2240, CTL5038 and CTL8038 LA-70-(B,P,S) - For CTL500DEWW LA-9020-(B,P,S) - Gel Media Holder for CTL9020 LA-37(-B, P, S) - For use with FA-20 LA-38(-B, P, S) - For use with PAR38 Gimbal fixture or FA-30 LA-39(-B, P, S) - For use with FA-40 LA-56 - Black Louver for CTL5256 Vertical Blade Louver Barn Doors BD40 LA-71 - For CTL500DEWW BD16 - For PAR16 fixtures CTL2116 and CTL2216 BD20 - For R20/PAR20 fixtures CTL120, CTL520, CTL2120, CTL220, CTL2220 and CTL8020 BD30* - For R30/PAR30 fixtures CTL130, CTL230, CTL330, CTL530, CTL2130, CTL2230, CTL5030 and CTL8030 BD38* - For PAR38 Gimbal fixtures CTL838 and CTL838/2 BD40* - For CTL140, CTL240, CTL2140, CTL2240, CTL340, CTL5038, CTL540 and CTL8030 BD56 - For CTL5256 BD60 - For CTL600 and CTL601 BD70 - For CTL500DEWW BD830 - For CTL830 *Black is the standard finish. Natural aluminum may be ordered by adding -U. Safety Cable Steel, 18" safety cable for track fixtures. Secures with swivel snap. LA-25-SC - 18" Cable Continued All specifications subject to change without notice.

65 FA-40 TL1212 Line Voltage Incandescent Track Fixture Accessories Catalog No. Type Project Front Lens Mounting Clips Black, set of 3. Honeycomb Louvers FA-28 - For CTL2820 and CTL2830 FA For CTL2838 FA-37 - For LA620/6020 FA-37A - ForLA630/6030 FA-37B - For LA6838/6038 FA-38 - For CTL830 and CTL838/2 FA For CTL9020 (Set of 4) LA-34 - For CTL820N, fits inside gimbal ring LA-35 - For use with FAH-16 LA-36 - For CTL830, no accessory holder required. Accessory Holders Egg Crate Louvers FA-40 FAH-16 - For PAR16 fixtures CTL2116 and CTL2216 FA-20 - For CTL120, CTL2120, CTL220, CTL2220, CTL520 and CTL8020 FA-30 - For CT130, CTL230, CTL330, CTL530, CTL600, CTL2130, CTL2230, CTL5030, and CTL8030 FA-40 - For CTL140, CTL240, CTL340, CTL540, CTL600/LA-40, CTL2140, CTL2240, CTL5038 and CTL8038 LA-70-(B,P,S) - For CTL500DEWW LA-9020-(B,P,S) - Gel Media Holder for CTL9020 LA-37(-B, P, S) - For use with FA-20 LA-38(-B, P, S) - For use with PAR38 Gimbal fixture or FA-30 LA-39(-B, P, S) - For use with FA-40 LA-56 - Black Louver for CTL5256 Vertical Blade Louver Barn Doors LA-71 - For CTL500DEWW BD16 - For PAR16 fixtures CTL2116 and CTL2216 BD20 - For R20/PAR20 fixtures CTL120, CTL520, CTL2120, CTL220, CTL2220 and CTL8020 BD30* - For R30/PAR30 fixtures CTL130, CTL230, CTL330, CTL530, CTL2130, CTL2230, CTL5030 and CTL8030 BD38* - For PAR38 Gimbal fixtures CTL838 and CTL838/2 BD40* - For CTL140, CTL240, CTL2140, CTL2240, CTL340, CTL5038, CTL540 and CTL8030 BD56 - For CTL5256 BD60 - For CTL600 and CTL601 BD70 - For CTL500DEWW BD830 - For CTL830 *Black is the standard finish. Natural aluminum may be ordered by adding -U. Safety Cable Steel, 18" safety cable for track fixtures. Secures with swivel snap. LA-25-SC - 18" Cable Continued All specifications subject to change without notice.

66 LF40-A TL1212 Track Fixture Accessories Lenses Catalog # Type Project All lenses are tempered glass to be used in place of supplied clear lens. -A Amber -B Blue -G Green -LB Lt. Blue -R Red -RO Rose -Y Yellow -CL Clear -LS Linear Spread -SL Soft Light -73 Spread -UV Optivex UV -DPE Dichroic Peach Lenses for MR11 Fixtures 1-11/32" (34mm) diameter. LF11-A - Amber LF11-B - Blue LF11-G - Green LF11-LB - Light Blue LF11-R - Red LF11-RO - Rose LF11-Y - Yellow LF Prismatic Spread Lens LF11-CL - Clear Replacement Lens LF11-LS - Linear Spread Lens LF11-SL - Soft Light Sandblasted Lens LF11-UV - Optivex UV Glass Lens Clear Lenses for MR16 Fixtures 2" (50mm) diameter LF Prismatic Spread Lens LF16-CL - Clear Replacement Lens LF16-LS - Linear Spread Lens LF16-SL - Soft Light Sandblasted Lens LF16-UV - Optivex UV Glass Lens 1-3/4" (45mm) diameter LF MM - Prismatic Spread Lens LF16-CL 45MM - Clear Replacement Lens LF16-LS 45MM - Linear Spread Lens LF16-SL 45MM - Soft Light Sandblasted Lens LF16-UV 45MM - Optivex UV Glass Filter 1-7/8" (47mm) diameter LF MM - Prismatic Spread Lens for CTR1623 and CTR1624 LF16-CL 47MM - Clear Replacement Lens for CTR1623 and CTR1624 LF16-LS 47MM - Linear Spread Lens for CTR1623 and CTR1624 LF16-SL 47MM - Soft Light Sandblasted lens for CTR1623 and CTR1624 LF16-UV 47MM - Optivex UV Glass Filter for CTR1623 and CTR Lenses for R20 fixtures 3-3/4" (95mm) diameter. Use with FA-20, or may be mounted to CTL830 by using FA-38 clips. LF20-A - Amber LF20-B - Blue LF20-DPE - Dichroic Peach (Metal Halide Color Correction) LF20-G - Green LF20-LB - Light Blue LF20-R - Red LF Spread Lens LF20-LS - Linear Spread Lens LF20-UV - Optivex UV Filter Colored Lenses for MR16 Fixtures 2" (50mm) diameter LF16-A - Amber LF16-B - Blue LF16-DPE - Dichroic Peach (Metal Halide Color Correction) LF16-G - Green LF16-LB - Light Blue LF16-R - Red LF16-RO - Rose LF16-Y - Yellow 1-3/4" (45mm) diameter LF16-A 45MM - Amber LF16-B 45MM - Blue LF16-G 45MM - Green LF16-LB 45MM - Light Blue LF16-R 45MM - Red LF16-RO 45MM - Rose LF16-Y 45MM - Yellow 1-7/8" (47mm) diameter LF16-A 47MM - Amber LF16-B 47MM - Blue LF16-G 47MM - Green LF16-LB 47MM - Light Blue LF16-R 47MM - Red LF16-RO 47MM - Rose LF16-Y 47MM - Yellow Lenses for R30/PAR30 Fixtures 4-11/16" (119mm) diameter. Use with FA-30 (Except CTL838, 838/2, 838/3 which include Spring Clips). LF30-A - Amber LF30-B - Blue LF30-DPE - Dichroic Peach (Metal Halide Color Correction) LF30-G - Green LF30-LB - Light Blue LF30-R - Red LF30-RO - Rose LF Spread Lens. LF30-LS - Linear Spread Lens LF30-UV - Optivex UV Filter Lenses for R40/PAR38 Fixtures 4-7/8" (124mm) diameter. Use within the aperture sleeve. LF38-A - Amber LF38-B - Blue LF38-DPE - Dichroic Peach (Metal Halide Color Correction) LF38-G - Green LF38-LB - Light Blue LF38-R - Red LF38-Y - Yellow LF Spread Lens LF38-LS - Linear Spread Lens LF38-SL - Soft Light Lens LF38-UV - Optivex UV Filter 5-7/8" (138mm) diameter. Use withfa-40 Accessory Holder. LF40-A LF40-A - Amber LF40-B - Blue LF40-DPE - Dichroic Peach (Metal Halide Color Correction) LF40-G - Green LF40-LB - Light Blue LF40-R - Red LF40-RO - Rose LF Spread Lens LF40-LS - Linear Spread Lens LF40-UV - Optivex UV Filter All specifications subject to change without notice.

67 LF40-B TL1212 Track Fixture Accessories Lenses Catalog # Type Project All lenses are tempered glass to be used in place of supplied clear lens. -A Amber -B Blue -G Green -LB Lt. Blue -R Red -RO Rose -Y Yellow -CL Clear -LS Linear Spread -SL Soft Light -73 Spread -UV Optivex UV -DPE Dichroic Peach Lenses for MR11 Fixtures 1-11/32" (34mm) diameter. LF11-A - Amber LF11-B - Blue LF11-G - Green LF11-LB - Light Blue LF11-R - Red LF11-RO - Rose LF11-Y - Yellow LF Prismatic Spread Lens LF11-CL - Clear Replacement Lens LF11-LS - Linear Spread Lens LF11-SL - Soft Light Sandblasted Lens LF11-UV - Optivex UV Glass Lens Clear Lenses for MR16 Fixtures 2" (50mm) diameter LF Prismatic Spread Lens LF16-CL - Clear Replacement Lens LF16-LS - Linear Spread Lens LF16-SL - Soft Light Sandblasted Lens LF16-UV - Optivex UV Glass Lens 1-3/4" (45mm) diameter LF MM - Prismatic Spread Lens LF16-CL 45MM - Clear Replacement Lens LF16-LS 45MM - Linear Spread Lens LF16-SL 45MM - Soft Light Sandblasted Lens LF16-UV 45MM - Optivex UV Glass Filter 1-7/8" (47mm) diameter LF MM - Prismatic Spread Lens for CTR1623 and CTR1624 LF16-CL 47MM - Clear Replacement Lens for CTR1623 and CTR1624 LF16-LS 47MM - Linear Spread Lens for CTR1623 and CTR1624 LF16-SL 47MM - Soft Light Sandblasted lens for CTR1623 and CTR1624 LF16-UV 47MM - Optivex UV Glass Filter for CTR1623 and CTR Lenses for R20 fixtures 3-3/4" (95mm) diameter. Use with FA-20, or may be mounted to CTL830 by using FA-38 clips. LF20-A - Amber LF20-B - Blue LF20-DPE - Dichroic Peach (Metal Halide Color Correction) LF20-G - Green LF20-LB - Light Blue LF20-R - Red LF Spread Lens LF20-LS - Linear Spread Lens LF20-UV - Optivex UV Filter Colored Lenses for MR16 Fixtures 2" (50mm) diameter LF16-A - Amber LF16-B - Blue LF16-DPE - Dichroic Peach (Metal Halide Color Correction) LF16-G - Green LF16-LB - Light Blue LF16-R - Red LF16-RO - Rose LF16-Y - Yellow 1-3/4" (45mm) diameter LF16-A 45MM - Amber LF16-B 45MM - Blue LF16-G 45MM - Green LF16-LB 45MM - Light Blue LF16-R 45MM - Red LF16-RO 45MM - Rose LF16-Y 45MM - Yellow 1-7/8" (47mm) diameter LF16-A 47MM - Amber LF16-B 47MM - Blue LF16-G 47MM - Green LF16-LB 47MM - Light Blue LF16-R 47MM - Red LF16-RO 47MM - Rose LF16-Y 47MM - Yellow Lenses for R30/PAR30 Fixtures 4-11/16" (119mm) diameter. Use with FA-30 (Except CTL838, 838/2, 838/3 which include Spring Clips). LF30-A - Amber LF30-B - Blue LF30-DPE - Dichroic Peach (Metal Halide Color Correction) LF30-G - Green LF30-LB - Light Blue LF30-R - Red LF30-RO - Rose LF Spread Lens. LF30-LS - Linear Spread Lens LF30-UV - Optivex UV Filter Lenses for R40/PAR38 Fixtures 4-7/8" (124mm) diameter. Use within the aperture sleeve. LF38-A - Amber LF38-B - Blue LF38-DPE - Dichroic Peach (Metal Halide Color Correction) LF38-G - Green LF38-LB - Light Blue LF38-R - Red LF38-Y - Yellow LF Spread Lens LF38-LS - Linear Spread Lens LF38-SL - Soft Light Lens LF38-UV - Optivex UV Filter 5-7/8" (138mm) diameter. Use withfa-40 Accessory Holder. LF40-B LF40-A - Amber LF40-B - Blue LF40-DPE - Dichroic Peach (Metal Halide Color Correction) LF40-G - Green LF40-LB - Light Blue LF40-R - Red LF40-RO - Rose LF Spread Lens LF40-LS - Linear Spread Lens LF40-UV - Optivex UV Filter All specifications subject to change without notice.

68 LF40-G TL1212 Track Fixture Accessories Lenses Catalog # Type Project All lenses are tempered glass to be used in place of supplied clear lens. -A Amber -B Blue -G Green -LB Lt. Blue -R Red -RO Rose -Y Yellow -CL Clear -LS Linear Spread -SL Soft Light -73 Spread -UV Optivex UV -DPE Dichroic Peach Lenses for MR11 Fixtures 1-11/32" (34mm) diameter. LF11-A - Amber LF11-B - Blue LF11-G - Green LF11-LB - Light Blue LF11-R - Red LF11-RO - Rose LF11-Y - Yellow LF Prismatic Spread Lens LF11-CL - Clear Replacement Lens LF11-LS - Linear Spread Lens LF11-SL - Soft Light Sandblasted Lens LF11-UV - Optivex UV Glass Lens Clear Lenses for MR16 Fixtures 2" (50mm) diameter LF Prismatic Spread Lens LF16-CL - Clear Replacement Lens LF16-LS - Linear Spread Lens LF16-SL - Soft Light Sandblasted Lens LF16-UV - Optivex UV Glass Lens 1-3/4" (45mm) diameter LF MM - Prismatic Spread Lens LF16-CL 45MM - Clear Replacement Lens LF16-LS 45MM - Linear Spread Lens LF16-SL 45MM - Soft Light Sandblasted Lens LF16-UV 45MM - Optivex UV Glass Filter 1-7/8" (47mm) diameter LF MM - Prismatic Spread Lens for CTR1623 and CTR1624 LF16-CL 47MM - Clear Replacement Lens for CTR1623 and CTR1624 LF16-LS 47MM - Linear Spread Lens for CTR1623 and CTR1624 LF16-SL 47MM - Soft Light Sandblasted lens for CTR1623 and CTR1624 LF16-UV 47MM - Optivex UV Glass Filter for CTR1623 and CTR Lenses for R20 fixtures 3-3/4" (95mm) diameter. Use with FA-20, or may be mounted to CTL830 by using FA-38 clips. LF20-A - Amber LF20-B - Blue LF20-DPE - Dichroic Peach (Metal Halide Color Correction) LF20-G - Green LF20-LB - Light Blue LF20-R - Red LF Spread Lens LF20-LS - Linear Spread Lens LF20-UV - Optivex UV Filter Colored Lenses for MR16 Fixtures 2" (50mm) diameter LF16-A - Amber LF16-B - Blue LF16-DPE - Dichroic Peach (Metal Halide Color Correction) LF16-G - Green LF16-LB - Light Blue LF16-R - Red LF16-RO - Rose LF16-Y - Yellow 1-3/4" (45mm) diameter LF16-A 45MM - Amber LF16-B 45MM - Blue LF16-G 45MM - Green LF16-LB 45MM - Light Blue LF16-R 45MM - Red LF16-RO 45MM - Rose LF16-Y 45MM - Yellow 1-7/8" (47mm) diameter LF16-A 47MM - Amber LF16-B 47MM - Blue LF16-G 47MM - Green LF16-LB 47MM - Light Blue LF16-R 47MM - Red LF16-RO 47MM - Rose LF16-Y 47MM - Yellow Lenses for R30/PAR30 Fixtures 4-11/16" (119mm) diameter. Use with FA-30 (Except CTL838, 838/2, 838/3 which include Spring Clips). LF30-A - Amber LF30-B - Blue LF30-DPE - Dichroic Peach (Metal Halide Color Correction) LF30-G - Green LF30-LB - Light Blue LF30-R - Red LF30-RO - Rose LF Spread Lens. LF30-LS - Linear Spread Lens LF30-UV - Optivex UV Filter Lenses for R40/PAR38 Fixtures 4-7/8" (124mm) diameter. Use within the aperture sleeve. LF38-A - Amber LF38-B - Blue LF38-DPE - Dichroic Peach (Metal Halide Color Correction) LF38-G - Green LF38-LB - Light Blue LF38-R - Red LF38-Y - Yellow LF Spread Lens LF38-LS - Linear Spread Lens LF38-SL - Soft Light Lens LF38-UV - Optivex UV Filter 5-7/8" (138mm) diameter. Use withfa-40 Accessory Holder. LF40-G LF40-A - Amber LF40-B - Blue LF40-DPE - Dichroic Peach (Metal Halide Color Correction) LF40-G - Green LF40-LB - Light Blue LF40-R - Red LF40-RO - Rose LF Spread Lens LF40-LS - Linear Spread Lens LF40-UV - Optivex UV Filter All specifications subject to change without notice.

69 LF40-R TL1212 Track Fixture Accessories Lenses Catalog # Type Project All lenses are tempered glass to be used in place of supplied clear lens. -A Amber -B Blue -G Green -LB Lt. Blue -R Red -RO Rose -Y Yellow -CL Clear -LS Linear Spread -SL Soft Light -73 Spread -UV Optivex UV -DPE Dichroic Peach Lenses for MR11 Fixtures 1-11/32" (34mm) diameter. LF11-A - Amber LF11-B - Blue LF11-G - Green LF11-LB - Light Blue LF11-R - Red LF11-RO - Rose LF11-Y - Yellow LF Prismatic Spread Lens LF11-CL - Clear Replacement Lens LF11-LS - Linear Spread Lens LF11-SL - Soft Light Sandblasted Lens LF11-UV - Optivex UV Glass Lens Clear Lenses for MR16 Fixtures 2" (50mm) diameter LF Prismatic Spread Lens LF16-CL - Clear Replacement Lens LF16-LS - Linear Spread Lens LF16-SL - Soft Light Sandblasted Lens LF16-UV - Optivex UV Glass Lens 1-3/4" (45mm) diameter LF MM - Prismatic Spread Lens LF16-CL 45MM - Clear Replacement Lens LF16-LS 45MM - Linear Spread Lens LF16-SL 45MM - Soft Light Sandblasted Lens LF16-UV 45MM - Optivex UV Glass Filter 1-7/8" (47mm) diameter LF MM - Prismatic Spread Lens for CTR1623 and CTR1624 LF16-CL 47MM - Clear Replacement Lens for CTR1623 and CTR1624 LF16-LS 47MM - Linear Spread Lens for CTR1623 and CTR1624 LF16-SL 47MM - Soft Light Sandblasted lens for CTR1623 and CTR1624 LF16-UV 47MM - Optivex UV Glass Filter for CTR1623 and CTR Lenses for R20 fixtures 3-3/4" (95mm) diameter. Use with FA-20, or may be mounted to CTL830 by using FA-38 clips. LF20-A - Amber LF20-B - Blue LF20-DPE - Dichroic Peach (Metal Halide Color Correction) LF20-G - Green LF20-LB - Light Blue LF20-R - Red LF Spread Lens LF20-LS - Linear Spread Lens LF20-UV - Optivex UV Filter Colored Lenses for MR16 Fixtures 2" (50mm) diameter LF16-A - Amber LF16-B - Blue LF16-DPE - Dichroic Peach (Metal Halide Color Correction) LF16-G - Green LF16-LB - Light Blue LF16-R - Red LF16-RO - Rose LF16-Y - Yellow 1-3/4" (45mm) diameter LF16-A 45MM - Amber LF16-B 45MM - Blue LF16-G 45MM - Green LF16-LB 45MM - Light Blue LF16-R 45MM - Red LF16-RO 45MM - Rose LF16-Y 45MM - Yellow 1-7/8" (47mm) diameter LF16-A 47MM - Amber LF16-B 47MM - Blue LF16-G 47MM - Green LF16-LB 47MM - Light Blue LF16-R 47MM - Red LF16-RO 47MM - Rose LF16-Y 47MM - Yellow Lenses for R30/PAR30 Fixtures 4-11/16" (119mm) diameter. Use with FA-30 (Except CTL838, 838/2, 838/3 which include Spring Clips). LF30-A - Amber LF30-B - Blue LF30-DPE - Dichroic Peach (Metal Halide Color Correction) LF30-G - Green LF30-LB - Light Blue LF30-R - Red LF30-RO - Rose LF Spread Lens. LF30-LS - Linear Spread Lens LF30-UV - Optivex UV Filter Lenses for R40/PAR38 Fixtures 4-7/8" (124mm) diameter. Use within the aperture sleeve. LF38-A - Amber LF38-B - Blue LF38-DPE - Dichroic Peach (Metal Halide Color Correction) LF38-G - Green LF38-LB - Light Blue LF38-R - Red LF38-Y - Yellow LF Spread Lens LF38-LS - Linear Spread Lens LF38-SL - Soft Light Lens LF38-UV - Optivex UV Filter 5-7/8" (138mm) diameter. Use withfa-40 Accessory Holder. LF40-R LF40-A - Amber LF40-B - Blue LF40-DPE - Dichroic Peach (Metal Halide Color Correction) LF40-G - Green LF40-LB - Light Blue LF40-R - Red LF40-RO - Rose LF Spread Lens LF40-LS - Linear Spread Lens LF40-UV - Optivex UV Filter All specifications subject to change without notice.

70 DMW GEB10IS GLR LP841 V4 Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Intended for low to medium mounting heights where dust, dirt, humidity, moisture, or corrosive elements are present. Ideal for canopies, dock areas, wastewater treatment, refrigerated areas, food processing and other non-hazardous environments. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. CONSTRUCTION Housing formed from impact resistant, UV stabilized, fiberglass reinforced polyester with cold-rolled steel enclosed wireway. Poured in gasketing provides a seal between housing and diffuser. Captive, corrosion-resistant cam-action latches secure the diffuser; six on 4 units, and ten on 8 units. Stainless steel latches available. Finish: Painted parts pretreated with a five-stage iron-phosphate process to ensure superior paint adhesion and corrosion resistance, then finished with a high-gloss, baked white enamel. OPTICS High-impact Acrylic diffuser with a stippled interior surface to spread lamp image. PLEASE NOTE: The standard 4 diffuser is 2-1/4 deep, and the standard 8 diffuser is 3 deep. To order the 4 diffuser so that it matches the depth of the 8 diffuser, order the ARDP option. The 8 diffuser is not available in the 2-1/4 depth. ELECTRICAL Thermally protected, resetting, Class P, HPF, non-pcb, UL Listed and CSA Certified ballast is standard. AWM, TFN, THHN wire throughout, rated for required temperatures. INSTALLATION For unit or row installations, surface (ceiling or wall) or suspended mounting. Wall mounting; horizontal orientation only for use in damp locations. LISTINGS 120V, 277V and MVOLT are UL Listed and CSA Certified (standard). 347V is CSA Certified (see Options). NOM Certified (see Options). Listed for 25 C ambient and wet locations for covered-ceiling applications. IP65 rated. Optional IP67 rating available for 4' units only. Compliance to FDA/USDA requirements and/or NSF splash-zone certification. WARRANTY 1-year limited warranty. Complete warranty terms located at Actual performance may differ as a result of end-user environment and application. Note: Specifications subject to change without notice. Notes Type Specifications Length: 50 (127.0) 98 (248.9) Width: 8-1/8 (20.6) Fixture depth: 5-5/8 (14.3) (deep lens) 4-3/4 (12.1) standard lens All dimensions are shown in inches (centimeters) unless otherwise noted. L Enclosed and Gasketed Industrial DMW INSTANT PROGRAMMED or RAPID START 4' or 8' length 1, 2 or 3 lamps W D ORDERING INFORMATION For shortest lead times, configure products using standard options (shown in bold). Example: DMW 2 32 MVOLT GEB10IS DMW GEB10IS GLR LP841 Series DMW Wet location For tandem double-length unit, add prefix T. Example: TDMW Number of lamps Lamp type Diffuser Voltage Ballast Options Not included. 28T5 28W T5 (48") 2 (blank) High-impact 32 32W T8 (48") acrylic (50% DR) 54T5HO 54W T5HO (48") 3 ARDP Deep high-impact acrylic (50% DR) MVOLT others available GEB10IS GEB10RS GEB10PS GEB10PS90 Electronic ballast, <10% THD, instant start 1 Electronic ballast, <10% THD,rapid start T5 electronic ballasts, <10% THD, programmed rapid start T5HO 90 o case temperature ballast ELDW Emergency battery pack (nominal 300 lumens) 5 EL5DW Emergency battery pack (nominal 500 lumens) 5 EL6DW Emergency battery pack (nominal 600 lumens) 5 EL14DW Emergency battery pack (nominal 1400 lumens) 5 GLR Internal fast-blow fusing 6 GMF Internal slow-blow fusing 6 RIF1 Radio interference filter, one per fixture STSL Stainless steel latches WLF Wet location fittings (one pair; installed, top) IP67 IP67 rated; requires 8 latches for 4' fixtures and 14 latches for 8' fixtures CSALP841 CSA = 82 certified CRI 4100 (only required Kelvin Lamps for 347V) NOM NOM certified CS88 6' Brad Harrison 16/3 cord and straight blade plug set 5 MSI_ Wet location occupancy sensor pre-wired 6,7 Accessories: Order as separate catalog number. BCD Bracket for hanger chain mounting. Two per package. 8 HC36 Chain hangers (1 pair, 36" long); Requires BCD. WLF Wet location fittings (1 pair, not installed) Notes 1 32W T8 lamps only. 2 Must specify GEB10PS ballast. 3 Must specify GEB10PS90 ballast. 4 Deep lens required to match 8' fixtures. 5 Must specify voltage; 120 or 277V only. 6 Must specify voltage. Not available with MVOLT. 7 For mounting up to 8' specify MSI8; for mounting up to 20' specify MSI20. 8 For stainless steel, specify STS (ex: BCD STS). INDUSTRIAL DMW-RS

71 DMW GEB10IS GLR LP841 V4 DMW Instant, Programmed and Rapid Start MOUNTING DATA For unit or row installation, surface (ceiling or wall) or suspended mounting. DMW Drill holes through housing and channel at appropriate locations. Includes gasketed wet location fittings on ends for power feeding/mounting. Fitting is threaded for 1/2" rigid conduit (optional WLF for top mounting). Attach to surface using fasteners and sealing washers (by others) appropriate to ceiling materials. Unit installation Minimum of two hangers required. Row installation Minimum of two hangers required. Recommended 1/2" nipple with union (by others) for DMW. DIMENSIONS Inches (centimeters). Subject to change without notice. 1-1/8 (2.9) 5-5/8 (14.3) 3/16 (0.5) 8-1/8 (20.6) A = 11/16 (17) Dia. B = 1-1/8 (29) Dia. Recommended mounting locations (field drilling required) 4-3/16 (10.6) 1-1/4 (3.2) 2-1/2 (6.4) 5-5/8 ( /8 (20.6) 7 (17.9) 2-3/4 (7.0) 50 (127.0) 7 (17.9) 4-1/4 (10.8) 8-1/8 (20.6) 7 (17.9) 2-3/4 (7.0) 98 (248.9) 7 (17.9) 1-1/4 (10.8) PHOTOMETRICS Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical. Full photometric data on these and other configurations available upon request. TEST NO: LTL17549 LUMINAIRE CATALOG NO.: DMW 2 32 MVOLT LUMENS PER LAMP: 2800 Coefficients of Utilization pf 20% pc 80% 70% 50% pw 50% 30%10% 50% 30% 10% 50% 30%10% RCR Zonal Lumen Summary Zone Lumens % Lamp % Fixture TEST NO: LTL17462 LUMINAIRE CATALOG NO.: DMW 2 54T5HO MVOLT ACNS90 LUMENS PER LAMP: 4500 Coefficients of Utilization pf 20% pc 80% 70% 50% pw 50% 30%10% 50% 30% 10% 50% 30%10% RCR Zonal Lumen Summary Zone Lumens % Lamp % Fixture DMW-RS INDUSTRIAL: One Lithonia Way Conyers, GA Phone: Fax: Acuity Brands Lighting, Inc All rights reserved. Rev. 03/05/12

72 TDMW /4 GEB10IS GLR LP841 V8 Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Intended for low to medium mounting heights where dust, dirt, humidity, moisture, or corrosive elements are present. Ideal for canopies, dock areas, wastewater treatment, refrigerated areas, food processing and other non-hazardous environments. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. CONSTRUCTION Housing formed from impact resistant, UV stabilized, fiberglass reinforced polyester with cold-rolled steel enclosed wireway. Poured in gasketing provides a seal between housing and diffuser. Captive, corrosion-resistant cam-action latches secure the diffuser; six on 4 units, and ten on 8 units. Stainless steel latches available. Finish: Painted parts pretreated with a five-stage iron-phosphate process to ensure superior paint adhesion and corrosion resistance, then finished with a high-gloss, baked white enamel. OPTICS High-impact Acrylic diffuser with a stippled interior surface to spread lamp image. PLEASE NOTE: The standard 4 diffuser is 2-1/4 deep, and the standard 8 diffuser is 3 deep. To order the 4 diffuser so that it matches the depth of the 8 diffuser, order the ARDP option. The 8 diffuser is not available in the 2-1/4 depth. ELECTRICAL Thermally protected, resetting, Class P, HPF, non-pcb, UL Listed and CSA Certified ballast is standard. AWM, TFN, THHN wire throughout, rated for required temperatures. INSTALLATION For unit or row installations, surface (ceiling or wall) or suspended mounting. Wall mounting; horizontal orientation only for use in damp locations. LISTINGS 120V, 277V and MVOLT are UL Listed and CSA Certified (standard). 347V is CSA Certified (see Options). NOM Certified (see Options). Listed for 25 C ambient and wet locations for covered-ceiling applications. IP65 rated. Optional IP67 rating available for 4' units only. Compliance to FDA/USDA requirements and/or NSF splash-zone certification. WARRANTY 1-year limited warranty. Complete warranty terms located at Actual performance may differ as a result of end-user environment and application. Note: Specifications subject to change without notice. Notes Type Specifications Length: 50 (127.0) 98 (248.9) Width: 8-1/8 (20.6) Fixture depth: 5-5/8 (14.3) (deep lens) 4-3/4 (12.1) standard lens All dimensions are shown in inches (centimeters) unless otherwise noted. L Enclosed and Gasketed Industrial DMW INSTANT PROGRAMMED or RAPID START 4' or 8' length 1, 2 or 3 lamps W D ORDERING INFORMATION For shortest lead times, configure products using standard options (shown in bold). Example: DMW 2 32 MVOLT GEB10IS TDMW GEB10IS GLR LP841 Series DMW Wet location For tandem double-length unit, add prefix T. Example: TDMW Number of lamps Lamp type Diffuser Voltage Ballast Options Not included. 28T5 28W T5 (48") 2 (blank) High-impact 32 32W T8 (48") acrylic (50% DR) 54T5HO 54W T5HO (48") 3 ARDP Deep high-impact acrylic (50% DR) MVOLT others available GEB10IS GEB10RS GEB10PS GEB10PS90 Electronic ballast, <10% THD, instant start 1 Electronic ballast, <10% THD,rapid start T5 electronic ballasts, <10% THD, programmed rapid start T5HO 90 o case temperature ballast ELDW Emergency battery pack (nominal 300 lumens) 5 EL5DW Emergency battery pack (nominal 500 lumens) 5 EL6DW Emergency battery pack (nominal 600 lumens) 5 EL14DW Emergency battery pack (nominal 1400 lumens) 5 GLR Internal fast-blow fusing 6 GMF Internal slow-blow fusing 6 RIF1 Radio interference filter, one per fixture STSL Stainless steel latches WLF Wet location fittings (one pair; installed, top) IP67 IP67 rated; requires 8 latches for 4' fixtures and 14 latches for 8' fixtures CSALP841 CSA = 82 certified CRI 4100 (only required Kelvin Lamps for 347V) NOM NOM certified CS88 6' Brad Harrison 16/3 cord and straight blade plug set 5 MSI_ Wet location occupancy sensor pre-wired 6,7 Accessories: Order as separate catalog number. BCD Bracket for hanger chain mounting. Two per package. 8 HC36 Chain hangers (1 pair, 36" long); Requires BCD. WLF Wet location fittings (1 pair, not installed) Notes 1 32W T8 lamps only. 2 Must specify GEB10PS ballast. 3 Must specify GEB10PS90 ballast. 4 Deep lens required to match 8' fixtures. 5 Must specify voltage; 120 or 277V only. 6 Must specify voltage. Not available with MVOLT. 7 For mounting up to 8' specify MSI8; for mounting up to 20' specify MSI20. 8 For stainless steel, specify STS (ex: BCD STS). INDUSTRIAL DMW-RS

73 TDMW /4 GEB10IS GLR LP841 V8 DMW Instant, Programmed and Rapid Start MOUNTING DATA For unit or row installation, surface (ceiling or wall) or suspended mounting. DMW Drill holes through housing and channel at appropriate locations. Includes gasketed wet location fittings on ends for power feeding/mounting. Fitting is threaded for 1/2" rigid conduit (optional WLF for top mounting). Attach to surface using fasteners and sealing washers (by others) appropriate to ceiling materials. Unit installation Minimum of two hangers required. Row installation Minimum of two hangers required. Recommended 1/2" nipple with union (by others) for DMW. DIMENSIONS Inches (centimeters). Subject to change without notice. 1-1/8 (2.9) 5-5/8 (14.3) 3/16 (0.5) 8-1/8 (20.6) A = 11/16 (17) Dia. B = 1-1/8 (29) Dia. Recommended mounting locations (field drilling required) 4-3/16 (10.6) 1-1/4 (3.2) 2-1/2 (6.4) 5-5/8 ( /8 (20.6) 7 (17.9) 2-3/4 (7.0) 50 (127.0) 7 (17.9) 4-1/4 (10.8) 8-1/8 (20.6) 7 (17.9) 2-3/4 (7.0) 98 (248.9) 7 (17.9) 1-1/4 (10.8) PHOTOMETRICS Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical. Full photometric data on these and other configurations available upon request. TEST NO: LTL17549 LUMINAIRE CATALOG NO.: DMW 2 32 MVOLT LUMENS PER LAMP: 2800 Coefficients of Utilization pf 20% pc 80% 70% 50% pw 50% 30%10% 50% 30% 10% 50% 30%10% RCR Zonal Lumen Summary Zone Lumens % Lamp % Fixture TEST NO: LTL17462 LUMINAIRE CATALOG NO.: DMW 2 54T5HO MVOLT ACNS90 LUMENS PER LAMP: 4500 Coefficients of Utilization pf 20% pc 80% 70% 50% pw 50% 30%10% 50% 30% 10% 50% 30%10% RCR Zonal Lumen Summary Zone Lumens % Lamp % Fixture DMW-RS INDUSTRIAL: One Lithonia Way Conyers, GA Phone: Fax: Acuity Brands Lighting, Inc All rights reserved. Rev. 03/05/12

74 EXR LED EL M6 X1B / X2B X1B Catalog Number FEATURES & SPECIFICATIONS INTENDED USE LED lighted exit signs for marking the means of egress in accordance with Life Safety Code NFPA 101. CONSTRUCTION Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components for easy installation. Universal J-box pattern and universal mounting capabilities: top, back or end mounting (canopy included). Universal chevrons are easily removed for directional indication. Fully assembled single face with extra faceplate for easy field-conversion to double face. Letters 6" high with 3/4" stroke, with 100 ft viewing distance rating, based on UL924 standards. OPTICS The typical life of the LED lamp is 10 years. ELECTRICAL Dual-voltage input 120V or 277V AC. Emergency exits provided with test switch, status indicator and rechargeable battery. Maintenance-free ni-cad battery provides 90 minutes of emergency power. LISTINGS UL Listed. Meets UL 924, NFPA 101, NFPA 70-NEC and OSHA illumination standards. Indoor damp location 50 to 104 F (10 C to 40 C) listed standard. WARRANTY Fixtures are covered by Lithonia Lighting 24-month warranty against mechanical defects in manufacture. All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties. Notes Type EXR LED Contractor Select LED Exits 1 5/8 7 3/16 All dimensions are inches (centimeters). 11 5/8 ORDERING INFORMATION Standard Catalog Supply Input Pallet Carton Number UPC Description Voltage Wattage Qty. Qty. EXR LED M Red exit 120/ EXG LED M Green exit 120/ EXR LED EL M Red exit with backup battery 120/ EXG LED EL M Green exit with backup battery 120/ Accessories 1 : Order as separate catalog number. ELA WG1 Wireguard (back mount only) Notes 1 See spec sheet ELA-WG. CONTRACTOR SELECT / EMERGENCY LED-EXITS

75 LF6N 2/13DTT F6LF1 277 GMF WLP41 SHL Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Ideal for a wide variety of low- to medium-height ceiling applications ideal for shower and outdoor applications where a wet location lensed fixture is required. CONSTRUCTION Heavy gauge die formed galvanized steel mounting frame with mechanical trim retention (yoke) ensures secure and flush reflector mounting to ceiling. Attached to frame are vertically adjustable mounting brackets for use with C channels, ½ steel conduit or 16 gauge flat bar hangers included, standard. Frames equipped with galvanized junction box UL Listed for through wire applications. Junction boxes equipped with (2) ¾ and (4) ½ conduit knockouts with pryout slots and removable access doors. Maximum 1-1/2 ceiling thickness. OPTICS Aluminum clear semi-specular full reflectors are optically designed to maximize lumen output and to provide superior glare control. Glass lenses are available in clear flat, tempered prismatic or fresnel glass lens to provide optimal visual comfort and improved aesthetics. ELECTRICAL Electronic ballast with end of lamp life protection standard. Class P thermally protected ballast protects against improper contact with insulation. Minimum starting temperature is 0 F/-18 C. Rated for #12 AWG conductor thru-branch wiring. Minimum supply wire. Ground wire provided. Lamp Socket Base: DTT 4-pin lamps 13W (G24Q-1); 18W (G24Q-2); 26W (G24Q-3) LISTING Fixtures are UL Listed for thru-branch wiring, Non-IC recessed mounting, wet location, and to U.S. and Canadian Safety Standards. Notes Specifications Max. Height: 6-3/8 (16.2) Ceiling Opening: 7 (17.8) Overlap Trim: 7-1/2 (19.1) Length: 13 (33.0) Width: 11 (27.9) All dimensions are inches (centimeters). Type Compact Fluorescent Downlighting 6 LF6N WET LENS Horizontal, 2-Lamp Double Twin-Tube (DTT) 7-1/2 (19.1) 6-3/8 (16.2) 13 (33.0) 6-3/8 (16.2) 5-1/2 (14.0) 7-1/2 (19.1) 11 (27.9) ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: LF6N 2/26DTT F6L4 MVOLT LF6N 2/13DTT F6LF1 277 GMF WLP41 Series LF6N Wattage/lamp 2/13DTT 1 2/18DTT 2/26DTT NOTES: 1 Not available with ADEZ or ECOS. 2 White painted flange standard. 3 Electronic multi-volt ballast capable of operating any line voltage from V, 50 or 60Hz. 4 Not available with EL or ELR. 5 Ships standard for 1-lamp operation. For 2-lamp operation, consult installation instructions or factory. Add 3 (7.6) to width and 4-1/2 (11.4) to length. 6 Not recommended for field installation. 7 One 5A relay with one 0-10 VDC dimming output, shipped installed. Requires additional nlight bus power supply. 8 For additional options see lithonia.com. Reflector/color 2 Glass lens F6LF3 White splay, white lens F6LFB3 Black baffle, white lens F6L4 White splay, fresnel lens F6LB4 Black baffle, fresnel lens F6LF73 White splay, tempered prismatic lens F6LFB73 Black baffle, tempered prismatic lens Drop glass lens F6LD3 White splay, drop opal lens F6LDB3 Black baffle, drop opal lens F6LF1 Flush opal poly lens Voltage MVOLT Accessories Order as separate catalog number SCA6 Sloped ceiling adaptor. Degree of slope must be specified (10D, 15D, 20D, 25D, 30D) Ex: SCA6 10D. CTE6 Ceiling thickness extender is used when ceiling thickness is greater than 1-1/2 (3.8). Maximum thickness 2 (5.1). Options 8 ADEZ Advance Mark 10 electronic dimming ballast, 120V or 277V. Minimum dimming level 5% ECOS Lutron EcoSystem electronic dimming ballast, 120V - 277V. Must be wattage specific. Minimum dimming level 5% EL Emergency PSDL3 DL battery pack with integral test switch. Lens removal required before EL testing 5 ELR Emergency PSDL3 DL battery pack with remote test switch 5 ELRHL2LP Iota I-162 Emergency battery pack with remote test switch. Operates two 26W CFL lamps in emergency mode with battery back-up in case of power disruption. Average lumen output is GMF Single slow-blow fuse, must specify voltage BDP Ballast disconnect plug (meets codes that require in-fixture disconnect) 4 RIF1 Radio interference filter LBH Less barhangers NSD Sensor Switch nlight dimming relay 7 WLP 35K lamp (shipped separately) WLP41 = 4100 Kelvin Lamp Downlighting and Track Sheet #: LF6N-WETLENS-2-DTT

76 LF6N 2/13DTT F6LF1 277 GMF WLP41 SHL F6L1/2 6" Lens Horizontal Fluorescent Trim Distribution curve Distribution data Output data Coefficient of utilization Single luminaire data 30" above floor F6LD1 PF, (2) 26W DTT lamp, 1.3 s/mh, 3650 rated lumens, Test no. LTL cp Lumens Zone Lumens % Lamp *26.2 *Total Efficiency pf 20% pc 80% 70% 50% pw 50% 30% 50% 30% 50% 30% Task Height: 2.5ft. Inital FC Mounting Center 50% beam % beam Height Beam Diameter FC Diameter FC F6LD2 PF (2) 26W DTT lamp, 1.0 s/mh, 3650 rated lumens, Test no. LTL cp Lumens Zone Lumens % Lamp *Total Efficiency *29.5 pf 20% pc 80% 70% 50% pw 50% 30% 50% 30% 50% 30% F6LF1 PF, (2) 26W DTT lamp, 1.3 s/mh, 3650 rated lumens, Test no. LTL cp Lumens Zone Lumens % Lamp *Total Efficiency *24.1 F6LF2 PF, (2) 26W DTT lamp, 1.0 s/mh, 3650 rated lumens, Test no. LTL cp Lumens Zone Lumens % Lamp *27.9 *Total Efficiency pf 20% pc 80% 70% 50% pw 50% 30% 50% 30% 50% 30% pf 20% pc 80% 70% 50% pw 50% 30% 50% 30% 50% 30% Task Height: 2.5ft. Inital FC Mounting Center 50% beam % beam Height Beam Diameter FC Diameter FC Task Height: 2.5ft. Inital FC Mounting Center 50% beam % beam Height Beam Diameter FC Diameter FC Task Height: 2.5ft. Inital FC Mounting Center 50% beam % beam Height Beam Diameter FC Diameter FC Sheet #: F6L1-2-COM 2000 Acuity Brands Lighting, Inc., Rev. 06/25/07 Lithonia Lighting Recessed Downlighting One Lithonia Way, Conyers, GA Phone: Fax:

77 VW42L M6 ROOF Catalog Number FEATURES & SPECIFICATIONS PRODUCT OVERVIEW Utility wall-, ceiling- or pendant-mounted fixtures for entrances, hallways, closets, tunnels or other utility applications. Incandescent, fluorescent, metal halide or high pressure sodium sources are available. CONSTRUCTION Rugged die-cast aluminum housing with heavy-duty glass globe. 3/4" threaded knockouts allow for side or top conduit entry. Gray finish. Designed for easy installation and maintenance. Prismatic globe for even distribution. Junction box included. LISTINGS Listed and labeled to UL standards for wet locations. Listed and labeled to CSA standards. WARRANTY Fixtures are covered by Lithonia Lighting 12-month warranty against mechanical defects in manufacture. Notes VC Type Utility Vapor Tights VP VW ORDERING INFORMATION Approx. Standard Catalog Lamp Lamp Weight Pallet Carton Number UPC Description Wattage Source Voltage Included (lbs) Qty Qty VC150I M Ceiling mount 150 Incandescent 120 N VP150I M Pendant mount 150 Incandescent 120 N VW150I M Wall mount 150 Incandescent 120 N VC300I M Ceiling mount 300 Incandescent 120 N VP300I M Pendant mount 300 Incandescent 120 N VW300I M Wall mount 300 Incandescent 120 N VC42L M Ceiling mount 42 Fluorescent 120 Y VP42L M Pendant mount 42 Fluorescent 120 Y VW42L M Wall mount 42 Fluorescent 120 Y VC100ML M Ceiling mount 100 MH 120 Y VP100ML M Pendant mount 100 MH 120 Y VW100ML M Wall mount 100 MH 120 Y VC150SL M Ceiling mount 150 HPS 120 Y VP150SL M Pendant mount 150 HPS 120 Y VW150SL M Wall mount 150 HPS 120 Y Outdoor Sheet #: Utility

78 VW42L M6 ROOF Utility Vapor Tights W Ceiling VC150I W Pendant VP150I W Wall VW150I H Height: 9" Width: 4-1/2" VC300I H Height: 9-7/8" Width: 4-1/2" VP300I H Height: 10" Width: 7-1/4" VW300I Height: 11-3/8" Width: 5-3/4" Height: 12-1/8" Width: 5-3/4" Height: 11-7/8" Width: 8-3/4" VC42L, VC150SL & VC100ML VP42L, VP150SL & VP100ML VW42L VW150SL & VW100ML Height: 14-7/8" Width: 7" Height: 13-1/4" Width: 7" Height: 15-1/2" Width: 8-3/4" Sheet #: Utility 2009 Acuity Brands Lighting, Inc., All rights reserved. Rev. 10/12/09 Lithonia Lighting Outdoor Lighting One Lithonia Way, Conyers, GA Phone: Fax: