ORDIC FIBERGLASS, INC.

Transcription

1 Pedestals, Secondary ORDIC FIBERGLASS, INC. Pedestals, Plastic PSP MG-L6350 or PSP MG-L6600 Copolymer polypropylene pedestals are manufactured by an injection molding process with UV stabilized material. Polypropylene pedestals resist fertilizers, salt air, and ultraviolet attack. The green pigment is permanently molded into the copolymer polypropylene and can-not peel or rust. WARNING, ELECTRIC, is molded into the pedestal top for easy identification. The top is secured to the base by a flange molded into the rear of the pedestal top and a penta-head bolt and hasp on the front. Accommodates three 6 port 350MCM or 600MCM connectors. Clear plastic covers included when connectors are ordered. All locking hardware is stainless steel. PSPF Series & PSPS Series Linear low density polyethylene material is UV stabilized. ELECTRIC is molded into the pedestal top for easy identification. There is an 8 x 10 label area molded in. Accommodates three or four 6 port 350 or 500 MCM connectors. Clear plastic covers included when connectors are ordered. All locking hardware is stainless steel. burial depth up to the molded in GROUND LINE. Molded step design resists deflection when buried. PSP MG-CE PSPF MG-CE PSPF Series has a flared bottom design allows for ample cable training, increased stability in a variety of soil conditions, and pedestal stacking. PSP MG-L6350 PSP MG-L6600 PSPF MG-L6350 PSPS MG-X Pedestals Top Lid Burial Depth Connectors PSP MG-L x 15 x Lay-in, 6 port, 350MCM PSP MG-L x 15 x Lay-in, 6 port, 600MCM PSPF MG-X x 15 x None PSPF MG-L x 15 x Lay-in, 6 port, 350MCM PSPF MG-4L x 15 x Lay-in, 6 port, 350MCM PSPF MG x 15 x , 6 port, 500MCM PSPF MG x 15 x , 6 port, 500MCM PSPS MG-X x 15 x X-None, however, available with connectors like the PSPF Series Page 43

2 Pedestals, PSP Series Copolymer polypropylene pedestals are manufactured by an injection molding process with UV stabilized material. Polypropylene pedestals resist fertilizers, salt air, and ultraviolet attack. The green pigment is permanently molded into the copolymer polypropylene and can-not peel or rust. WARNING, ELECTRIC, is molded into the pedestal top for easy identification. The top is secured to the base by a flange molded into the rear of the pedestal top and a penta-head bolt and hasp on the front. Ribs and steps are molded into the pedestal for rigidity. This design resists deflection in a buried position and ensures the base and lid a unified connection after servicing. Pedestals Lock Burial Depth PSP MG Horizontal PSP MG Horizontal PSP MG Horizontal PSPB /18-MG Only PSPB MG Only 15 PSPT MG Top Only 15 PSPT MG Top Only 18 Pedestals convertible to Hand Holes PSPX MG Vertical PSPX MG Double PSPXB MG Only 15 PSPXT MG Top Only 15 PSPX-91330/36-MG Vertical PSPX /36-MG Double PSPXB MG Only PSPXT MG Top Only 18 PSPX domed pedestals are convertible to hand holes. The vertical locking mechanism bolts to the base flange. The domed cover can be removed and a flat cover (HHC-2121 or HHC-1619), can be attached to the base. HHC and HHC can be used as covers for the PSPX2 pedestals, PSPXTplastic secondary pedestal convertible top, X-convertible, T-Top, PSPXB-plastic secondary pedestal convertible base, B-, PSPX-plastic secondary pedestal convertible to a hand hole. PSP MG PSP MG PSPX MG PSPX MG PSP MG PSP MG-CE PSP Lock PSPX Lock PSPX2 Lock PSPX MG PSPX MG PSPX MG PSPX MG Cable Entrance Cover: Black plastic cover can be installed inside a secondary pedestal for a cable entrance cover. Maximum cable hole dimension is 2 OD. Includes mounting hardware. PSP Lock: Horizontal lock; pentahead bolt enters a plastic receiver in base to hold in place. Hasp is riveted to base. Hasp tab has hole for pad locking lid to base. PSPX Lock: Vertical single locking mechanism bolts to the base flange. PSPX2 Lock: Vertical double locking with a bit on the lid and base to allow pad-lock shaft to slide through for padlocking. Page 44

3 Pedestals, PSP Interchangeable Series Interchangeable with the same sized pedestals from other manufacturers. Copolymer polypropylene pedestals are manufactured by an injection molding process with UV stabilized material. Polypropylene pedestals resist fertilizers, salt air, and ultraviolet attack. The green pigment is permanently molded into the copolymer polypropylene and can not peel or rust. WARNING, ELECTRIC, is molded into the pedestal top for easy identification. PSPX MG The top is secured to the base by a flange molded into the rear of the pedestal top and a penta-head bolt and hasp on the front. Ribs and steps are molded into the pedestal for rigidity. This design resists deflection in a buried position and ensures the base and lid a unified connection after servicing. PSPXT MG Pedestals L x W x H Burial Depth Locking System PSPX MG 10 x 18 x Penta-Head PSPXT MG (Domed Lid) 10 x 18 x15 PSPX MG 10 x 18 x Hasp & Penta-Head PSPX2T MG (Domed Lid) 10 x 18 x15 PSPX MG PSPX Lock (Penta-Head) PSPX2 Lock (Hasp & Penta-Head) PSPX2T MG Page 45

4 Pedestals, P-50 Series Rust free SMC and stainless steel hardware. The P-50 and P-55 Series are manufactured of compression molded fiberglass (SMC). Fire retardant and UV additives are permanently molded in throughout the laminate. Pigment is permanently molded into the fiberglass and the fiberglass does not peel, providing a maintenance free pedestal for many years. Fiberglass pedestals resist fertilizers, salt air, and ultraviolet attack. Available in Munsell Green color. Two sizes of Nordic pedestals, for installation with anchoring devices, are available for above ground housing of cable splices. The top section is removable for easy access to cables. Stakes are available for added stability when installed. Recessed penta-head locking is an option. P-50-MG P-50-P-MG PR-50-MG P-55-MG P-55-P-MG PR-55-MG Installed PR-50 Installed PR-55 Pedestal Hasp Lock Top Dimension Penta Head Lock Above Hasp & Penta Head Lock Below Locking System P-50-MG 8 x Hasp P-50-P-MG 8 x Penta-Head PR-50-MG 8 x Hasp & Penta-Head P-55-MG 8 x Hasp P-55-P-MG 8 x Penta-Head PR-55-MG 8 x Hasp & Penta-Head PR-50-P-51-MG P-50-MG-P-52 P-50-MG-P-53 Stakes Description Dimension P-51 Fiberglass Anchor 19 x 2 x 2 P-52 Galvanized Steel Stake 48 Long P-53 Galvanized Steel Stake 60 Long P-54 Galvanized Steel Stake 72 Long Page 46

5 Pedestals, PRMC Series Rust free SMC and stainless steel hardware. PRMC series is manufactured of compression-molded fiberglass (SMC). Fire retardant and UV additives are permanently molded in throughout the laminate. Pigment is permanently molded into the fiberglass and the fiberglass does not peel, providing a maintenance free pedestal for many years. Fiberglass pedestals resist fertilizers, salt air, and ultraviolet attack. Available in Munsell Green color. Stainless steel and aluminum hardware provide long term protection against rust. ELECTRIC is molded in raised lettering on the top lid. A 3 flange around the perimeter provides stability when buried. P-109 locking assembly for safety. PRMC-150-MG Cable Entrance Cover: PRMC-160-MG PRMC-170-MG PRMC-190-MG Black plastic cover can be installed inside a secondary pedestal for a cable entrance cover. Maximum cable hole dimension is 2 OD. Includes mounting hardware. Pedestal Top Cover Dimensions Lid Above PRMC-150-MG-CE Below Locking System PRMC-150-MG 30 9 x 14 x P-109 PRMC-160-MG 24 9 x 14 x P-109 PRMC-170-MG 30 9 x 14 x P-109 PRMC-190-MG 36 9 x 14 x P-109 Page 47