Aircraft Type Practical Experience List of Tasks for aircraft s of Group 2, 3. General dates

Transcription

1 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. General dates Name trainee : Aircraft Type : Date of Birth : Aircraft registration : Please tick on witch group and aircraft construction (structure) the practical experience will be performed: Aircraft group (s) Aircraft construction (structure) pressurised aircraft : composite structure aircraft : Practical experience for group 2 aircraft : metal structure aircraft : wooden structure aircraft : Practical experience for group 3 aircraft : aircraft with metal tubing structure covered with fabric : Name of aintenance rganisation Approval reference number of aintenance rganisation Signature of accountable or technical manager Name of Supervisor Name of Assessor Position, rganisation, Approval No/ Licence Number Signature sample Assessment started (date) Assessment completed (date) Date Competence obtained CAT Trainee Signature Supervisor Signature Assessor Signature ATA 05 Time limits/aintenance checks Perform job preparation for 100/ annual hour check. (general aviation aircraft) Perform job preparation of an B or C check. (transport category aircraft) F_LFA_PEL_019_B_AL_04_v1_ Page 1 of 27

2 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Assist carrying out a scheduled maintenance check i.a.w. A. or any other manufacturer information s. Review aircraft maintenance log`s for correct completion. Review records for compliance with airworthiness directives. Review records for compliance with service bulletins, service information s, service letters and other available manufacturer aintenance daters / Information s. Review records for compliance with component life limits. Perform job preparation for unscheduled maintenance Inspections according aircraft manufacturer aintenance daters / Information s. Example: Procedure for Inspection following heavy landing. Example: Procedure for Inspection following lightning strike.,, Perform at least one unscheduled maintenance Inspection according aircraft manufacturer aintenance dated / Information s. See Page 25: Note detailed each preformed Unscheduled maintenance Inspections. ATA 06 Dimensions/Areas Locate component(s) by station number. Perform deduction of possible damages by using station number diagram Perform symmetry check. ATA 07 Lifting and Shoring Jack aircraft nose - tail wheel. Jack complete aircraft. Sling or trestle major component. ATA 08 Levelling/Weighing Preform Level of the aircraft. Preform Weighting of the aircraft. Preform weight and balance of flight control surfaces. B1.1, B1.2 Preform weight and balance. (amendment) B1.1, B1.2 Check aircraft against equipment list (According Aircraft AF or EL or other manufacturer documents) ATA 09 Towing and Taxiing Prepare for aircraft towing/ handling. F_LFA_PEL_019_B_AL_04_v1_ Page 2 of 27

3 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Preform towing/ handling of the aircraft. Be part of aircraft towing team. ATA 10 Parking and mooring Tie down aircraft. Park, secure and cover aircraft. Position aircraft in maintenance dock. Secure ain and Tail rotor blades. ATA 11 Placards and arkings Check aircraft for correct placards. Check aircraft for correct markings. ATA 12 Servicing Refuel aircraft. Defuel aircraft. Carry out tank to tank fuel transfer. Check/adjust tire pressures. Check/replenish oil level. Check/replenish hydraulic fluid level. B1.1, B1.2 Check/replenish water fluid level. Check/replenish accumulator pressure. Charge pneumatic/xygen system. B1.1, B1.2 Preform servicing of Hydraulic shockabsorbes/ cylinder s (Landing gear System/ Rotor System) Grease aircraft. Connect ground power. Service toilet/water system B1.1, B1.2 Perform pre-flight/daily check Preform power on test / Switch-on airplane Systems to perform all items according pre-flight/daily or aintenance check s according AF or A. Note: Describe all performed task s detail after Page behind 25 ATA 18 Vibration and Noise Analysis Analyse helicopter vibration problems. Analyse noise spectrum. F_LFA_PEL_019_B_AL_04_v1_ Page 3 of 27

4 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Analyse engine vibration. Preform Rotor Tracing and Vibration check Preform Propeller/ Blower balancing (Vibration check) B1.1, B1.2 Preform engine vibration check Perform inspection of vibration absorber s and or shock-mount ATA 21 Air Conditioning ATA 22 Auto flight Replace/Install combustion heater. Replace/Install outflow valve. Replace flow control valve. Replace/Install vapour cycle unit. Replace/Install air cycle unit. Replace/Install cabin blower. Replace/Install heat exchanger. Replace/Install pressurisation controller. Clean outflow valves. Deactivate/reactivate cargo isolation valve. Check operation of air conditioning/heating system Deactivate/reactivate avionics ventilation components. Check operation of pressurisation system Troubleshoot faulty system Perform detailed introduction to Air Conditioning System acc. A or any other manufacturer information s especially in reflection to all electrical components or units of the system. Perform detailed introduction to Air Conditioning/Heater System acc. A or any other manufacturer information. Perform detailed introduction to auto flight system acc. A or any other manufacturer information especially in reflection to all F_LFA_PEL_019_B_AL_04_v1_ Page 4 of 27

5 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. electrical components or units. Replace/ Install servos. Perform Adjustments on servos. Perform Inspection, Adjustment of Rig bridle cables Replace/Install controller. Replace/Install amplifier. Replacement of the auto flight system LRUs in case of fly-by-wire aircraft. Check operation of auto-pilot. Perform relevant electrical test, adjustment of auto-pilot system acc. A Check operation of auto-throttle/auto-thrust. Perform relevant electrical test, adjustment of auto-throttle/autothrust system acc. A Check perform operation/ adjustment of yaw damper. Perform relevant electrical test, operation, adjustment of yaw damper system acc. A Check perform operation/ adjustment of pitch damper. Perform relevant electrical test, operation, adjustment of pitch damper system acc. A Check perform operation/ adjustment of roll damper. Perform relevant electrical test, operation, adjustment of roll damper system acc. A Check and adjust servo clutch. Perform autopilot gain adjustments. Perform mach trim functional check. B1.1, B1.2 Troubleshoot faulty system. Check auto land system Check flight management systems Check stability augmentation system ATA 23 Communications Perform detailed introduction to communication System acc. A or any other manufacturer information (pay close attention to)all electrical components or units. Replace/Install VHF com unit. F_LFA_PEL_019_B_AL_04_v1_ Page 5 of 27

6 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Replace/Install HF com unit. Replace/Install existing antenna. Replace/Install static discharge wicks. Check operation of radios. Example : Perform check AF, A Perform antenna VSWR check. Perform radio check according Austrian LTH 40 Perform Selcal operational check. Perform operational check of passenger address system. Functionally check audio integrating system. Replace/Install / Repair co-axial cable. Troubleshoot faulty system. ATA 24 Electrical Power Perform detailed introduction of electrical power System acc. A or any other manufacturer information especially in reflection to all electrical components or units. Charge lead/acid battery. Charge ni-cad battery. Check battery capacity. Deep-cycle ni-cad battery. Replace/ Install integrated drive or generator and or alternator. Perform check of an generator/alternator Replace / Install switches and connectors Repair /Replace / Install switches and connectors. Replace/ Install circuit breakers. Perform functional check/ adjustment s of voltage regulator. Replace/ install voltage regulator. Amend electrical load analysis report. Repair/replace electrical feeder cable. Install /replace electrical feeder cable. Perform inspection, repair/ replacement/ installation of electrical cables, connectors and any other electrical basic components acc. A or any other manufacturer information, or AC or F_LFA_PEL_019_B_AL_04_v1_ Page 6 of 27

7 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. FAR 43 Annex E,F Troubleshoot faulty system Perform functional check of integrated drive/ generator/ alternator. Perform functional check/ adjustments of integrated drive/generator/alternator. Perform functional check of voltage regulator. Perform functional check of emergency generation system. Perform functional check/ adjustment s of emergency generation system. Perform standard maintenance inspection, repair/ replacement/ installation of electrical wire, connector`s according to A or any other manufacturer information s, or AC ATA 25 Equipment/Furnishings Replace/ Install carpets Replace/ Install crew seats. Replace/ Install passenger seats. Check inertia reels. Check seats/belts for security. Check emergency equipment. Example: First Aid Kit.etc. Check ELT for compliance with regulations. Preform ELT functional check Repair toilet waste container. B1.1, B1.2 Remove and install ceiling and sidewall panels. Repair upholstery. Change cabin configuration. Replace cargo loading system actuator. B1.1, B1.2 Test cargo loading system. B1.1, B1.2 Replace escape slides/ropes. B1.1, B1.2 ATA 26 Fire protection Check fire bottle contents. Check/test operation of fire/smoke detection and warning system. Check cabin fire extinguisher contents. F_LFA_PEL_019_B_AL_04_v1_ Page 7 of 27

8 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Example: Portable fire extinguisher. Check lavatory smoke detector system. B1.1, B1.2 Check/test operation of fire/smoke detection and warning system. Replace / Install fire bottle squib. Replace / Install new fire bottle. Troubleshoot faulty system. Inspect engine fire wire detection systems ATA 27 Flight Controls Perform detailed introduction to flight control system acc. A or any other manufacturer information s especially in reflection to all electrical components or units of the system. Inspect primary flight controls and related components i.a.w. A. Extending/ retracting flaps & slats. B1.1, B1.2 Replace/ Install horizontal or vertical stabiliser Replace/ install spoiler/lift damper. B1.1, B1.2 Replace/ install elevator. B1.1, B1.2 Deactivation/ reactivation of aileron, rudder and or elevator servo control. B1.1, B1.2 Replace/ Install aileron. B1.1, B1.2 Replace/ Install rudder. B1.1, B1.2 Replace/ Install trim tabs. B1.1, B1.2 Replace/ Install control cable and fittings. Replace/ Install flaps. B1.1, B1.2 Replace/ Install powered flying control unit. Replace/ Install flap actuator. Rig/ Adjustment of flight controls. Adjust trim tab. Inspect and adjust control cable tension. Check control range and direction of movement. F_LFA_PEL_019_B_AL_04_v1_ Page 8 of 27

9 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Check for correct assembly and locking. Troubleshoot faulty system. Functional test of primary flight controls. Functional test of flap system. B1.1, B1.2 perational test of the side stick assembly. B1.1, B1.2 perational test of the THS. B1.1, B1.2 THS system wear check. B1.1, B1.2 ATA 28 Fuel Perform Inspection/ check of Control cables, pulley s. Perform Inspection of control tubes, connection devices (Forks, Eay bearings) Perform Adjustment of control tubes.( Basic Rigging) Perform Inspection/ Check of bell cranks, torque tubes, control tubes, spindles - actuators Perform a detailed introduction to fuel system acc. A or any other manufacturer information especially in compair to all electrical components or units of the system. Replace /Install booster pump. Perform check of water drain system (operation). Replace /Install fuel selector. Perform Inspection of fuel selector. Perform inspection of fuel lines, hoses and tubing. Replace /Install fuel tank cells. Perform Inspection of fuel tank cells. Replace /Install /test fuel control valves. Replace /Install magnetic fuel level indicators. Replace /Install water drain valve. Check/calculate fuel contents manually. F_LFA_PEL_019_B_AL_04_v1_ Page 9 of 27

10 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Check filters. Perform flow check of fuel system. Check calibration/ Adjustment of fuel quantity gauges. Check calibration/ Adjustment of fuel quantity gauges. ( just for integrated electronic. System s ) Check operation feed/selectors. Check operation of fuel dump/jettison system. Troubleshoot faulty system. Fuel transfer between tanks. Perform Pressure defuel or fueling. B1.1, B1.2 Pressure refuel (manual control). ATA 29 Hydraulics Deactivation/reactivation of the fuel valves (transfer defuel, X-feed, refuel). Replace engine driven pump. Perform a detailed introduction of hydraulic system acc. A or any other manufacturer information especially in reflection to all electrical components or units of the system. Check/replace case drain filter. Replace /install / inspection standby pump. Replace / install / inspection hydraulic motor pump/generator. Replace/ install / inspection accumulator. Perform inspection of hydraulic lines, hoses and tubing. Check operation of shut off valve. Check filters/ clog system and indicator. Check indicating systems. Pressurization/depressurization of the hydraulic system. Power Transfer Unit (PTU) operation. F_LFA_PEL_019_B_AL_04_v1_ Page 10 of 27

11 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Replacement /Install of PTU. Troubleshoot faulty system. ATA 30 Ice and rain protection Perform Replace/ installation, inspection of pump. B1.1, B1.2 Perform a detailed introduction of Ice and rain protection system acc. A or any other manufacturer information s especially in reflection to all electrical components or units of the system. Replace/ install timer. Inspect repair propeller or wing deice boot. B1.1, B1.2 Replace/ Install wiper motor. Test propeller de-icing system. B1.1, B1.2 Inspect/test wing leading edge de-icer boot. Replace anti-ice/deice valve. B1.1, B1.2 Check operation of systems. B1.1, B1.2 perational test of the pitot-probe ice protection. perational test of the TAT ice protection. B1.1, B1.2 perational test of the wing ice protection system. B1.1, B1.2 Assistance to the operational test of the engine air-intake ice protection (with engines operating). Perform inspection of Ice and rain dedection probes Perform inspection of lines, hoses and tubing of liquid ice protection systems. B1.1, B1.2 Troubleshoot faulty system. ATA 31 Indicating/recording systems Replace/ install flight data recorder. Replace/ Install cockpit voice recorder. Replace/ Install clock. Replace/ Install master caution unit. Replace/ Install FDR. Perform FDR data retrieval. Troubleshoot faulty system. Implement ESDS procedures. F_LFA_PEL_019_B_AL_04_v1_ Page 11 of 27

12 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Start/stop EIS procedure. Bite test of the CFDIU. B1.1, B1.2 Ground scanning of the central warning system. Inspect for HIRF requirements. Perform inspection of correct marking of indicators. Replace/ Install indicators ATA 32 Landing Gear Build up wheel. Replace/ Install main wheel. Perform inspection of Wheel s (Tube, Tier, Wheel half s, bearings ) Perform lubrication of Wheel bearings Perform inspection of break discs Replace/ Install nose or tail wheel. Perform Inspection of Break tubing, lines and or hose s Replace/ Install steering actuator. B1.1, B1.2 Replace/ Install truck tilt actuator. B1.1, B1.2 Replace/ Install gear retraction actuator. Replace/ Install unlock/down lock assembly. Replace/ Install/ servicing shimmy damper. Rig nose wheel steering. Functional test of the nose and or tail wheel steering system. Replace/ Install shock strut seals. Servicing of shock strut. Replace/ Install brake unit. Perform inspection of brake unit. F_LFA_PEL_019_B_AL_04_v1_ Page 12 of 27

13 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Replace/ Install brake control valve. Bleed brakes. Test anti skid unit. B1.1, B1.2 Replace/ Install brake fan. B1.1, B1.2 Test gear retraction. Change bungees. B1.1, B1.2 Adjust micro switches/sensors. Perform servicing and Charge struts with oil and air. Troubleshoot faulty system. Test auto - brake system. B1.1, B1.2 Replace rotorcraft skids. Replace rotorcraft skid shoes. Replace rotorcraft skid shoes. Pack and check floats. Flotation equipment. Check/test emergency blowdown (emergency landing gear extension). perational test of the landing gear doors. Perform inspection of an helicopter under charge. ATA 33 Lights Repair/Install/ replace rotating beacon or flashlight. Repair/Install/ replace landing lights. Repair/Install/ replace instrument s lights. Repair/Install/ replace navigation lights. Repair/Install/ replace interior lights. Repair/ Install/ replace logo lights. Repair/ Install/ replace emergency lighting system. Perform emergency lighting system checks. F_LFA_PEL_019_B_AL_04_v1_ Page 13 of 27

14 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Troubleshoot faulty system. ATA 34 Navigation Calibrate magnetic direction indicator. Perform detailed introduction to Navigation System acc. A or any other manufacturer information especially in reflection to all electrical components or units of the system. Replace / Install airspeed indicator. Perform inspection and or change of instrument hoses and tubing. Perform inspection of instrument markings according AF. Replace / Install altimeter. Replace / Install air data computer. Perform adjustment/ Testing of air data computer Replace / Install VR unit. Replace / Install ADI. Replace / Install HSI. Check pitot static system for leaks. Check operation of directional gyro. Functional check weather radar. Functional check ADF. Functional check VR. Perform Functional check of TCAS/ TAS. Functional check DE. Functional check ATC Transponder. Functional check flight director system. Functional check inertial nav system. Complete quadrantal error correction of ADF system. Update flight management system database. Check calibration of pitot static instruments. Check calibration of pressure altitude reporting system. Troubleshoot faulty system. Check marker systems. F_LFA_PEL_019_B_AL_04_v1_ Page 14 of 27

15 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. ATA 35 xygen Compass replacement/ installation of direct/indirect. Perform functional check of Satcom. Perform Inspection on Radar altimeter Perform Inspection on EGPWS Perform change of Navigation software Perform functional check of GPS system. Perform Inspection of compass system Perform compass swing check and adjustment of magnetic compass. Perform compass swing check and adjustment Test AVS. Inspect on board oxygen equipment. B1.1, B1.2 Perform inspection of oxygen mask, bottle and regulator. B1.1, B1.2 Perform inspection of oxygen hoses and tubing. B1.1, B1.2 Purge and recharge oxygen system. B1.1, B1.2 Replace/ Install regulator. B1.1, B1.2 Replace / Install oxygen generator. B1.1, B1.2 Test crew oxygen system. B1.1, B1.2 Perform auto oxygen system deployment check. B1.1, B1.2 Troubleshoot faulty system. B1.1, B1.2 ATA 36 Pneumatic systems Replace/ install / inspect filter. Replace / install air shut off valve. Replace / install pressure regulating valve. Replace / install inspect compressor, pump. Recharge dessicator. Adjust regulator. Check for leaks. Troubleshoot faulty system. Perform inspection of Pneumatic systems hoses and tubing. F_LFA_PEL_019_B_AL_04_v1_ Page 15 of 27

16 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. ATA 37 Vacuum systems Replace/ Install/ Inspect vacuum pump. Inspect the vacuum system i.a.w. A. Check/replace filters. Adjust regulator. Troubleshoot faulty system. Perform inspection of Vacuum systems hoses and tubing. ATA 38 Water/Waste Replace water pump. B1.1, B1.2 Perform inspection of Water/Waste systems hoses and tubing. B1.1, B1.2 Replace tap. B1.1, B1.2 Replace toilet pump. B1.1, B1.2 Troubleshoot faulty system. B1.1, B1.2 Perform water heater functional check. B1.1, B1.2 Inspect waste bin flap closure. B1.1, B1.2 ATA 45 Central aintenance System Retrieve data from CU. Replace CU. Perform Bite check. Troubleshoot faulty system. ATA 49 Airborne Auxiliary power Removal/installation, check of the APU. Perform Removal / installation, check of the inlet guide-vane actuator. B1.1, B1.2 perational test of the APU emergency shut-down test. B1.1, B1.2 perational test of the APU. ATA 51 Structures Assessment of damage. Perform repair of Sheet metal, composite, wooden and or metal tubing strucutur with fabric. (According A and or AC 43.13) Perform inspection / Repair of losing rivets F_LFA_PEL_019_B_AL_04_v1_ Page 16 of 27

17 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Perform inspection of Fuselage component s Perform inspection of Wing component s B1.1, B1.2 Perform inspection of Empennage component s Perform inspection of main / tail rotor component s Perform inspection of drive train System. Perform inspection of main, tail rotor and or intermediate transmission system s Perform inspection of swash plate Perform inspection of hub system Perform inspection main and tail rotor blades Perform Fibre glass repair and inspection. Perform Wooden repair and inspection.. Perform Fabric repair and inspection. Perform Recover fabric control surface. Treat corrosion. Apply protective treatment. ATA 52 Doors Rig/adjust locking mechanism. Inspect passenger door i.a.w. A. Rig/adjust locking mechanism. Adjust air stair system. B1.1, B1.2 Check operation of emergency exits. Test door warning system. Troubleshoot faulty system. Remove and install passenger door i.a.w. A. Remove and install emergency exit i.a.w. A. Inspect cargo door i.a.w. A. F_LFA_PEL_019_B_AL_04_v1_ Page 17 of 27

18 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. ATA 56 Windows Replace / Install windshield. Replace / Install cabin window. Repair transparency. Replace direct vision window. Perform inspection of windows Perform inspection sealing. Perform cleaning of windows ATA 57 Wings Perform Skin repair. B1.1, B1.2 Recover fabric wing. B1.1, B1.2 Perform test, inspection of fabric covering. B1.1, B1.2 Replace/ install tip. B1.1, B1.2 Replace/ install rib. B1.1, B1.2 Perform inspection of wing structure. B1.1, B1.2 Check incidence/rig. B1.1, B1.2 Replace /Install integral fuel tank panel. B1.1, B1.2 ATA 61 Propeller Assemble prop after transportation. B1.1, B1.2 Replace /Install propeller B1.1, B1.2 Perform propeller Adjusts. (Basic adjustment s) B1.1, B1.2 Replace /Install governor. B1.1, B1.2 Perform governor Adjusts. B1.1, B1.2 Perform static functional checks. B1.1, B1.2 Check operation during ground run. B1.1, B1.2 Check track. B1.1, B1.2 Check setting of micro switches. B1.1, B1.2 Assessment of propeller blade damage i.a.w. A. B1.1, B1.2 Dynamically balance prop blade. B1.1, B1.2 F_LFA_PEL_019_B_AL_04_v1_ Page 18 of 27

19 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Troubleshoot faulty system. B1.1, B1.2 Perform inspection on propeller blades B1.1, B1.2 ATA 62 ain Rotors Replace/ Install rotor / main rotor blade assembly. Assessment of rotor blade damage i.a.w. A. Replace/ Install damper assembly. Check track. Perform rotor blade Adjusts. (Basic adjustment s) Check static balance. Check dynamic balance. Troubleshoot. ATA 63 Rotor Drive Replace/ Install, inspect mast. Replace/ Install, inspect drive coupling. Replace/ Install inspect clutch/freewheel unit Replace/ Install inspect drive belt. Replace/ Install inspect main gearbox. verhaul main gearbox. Perform scheduled inspection on main gearbox i.a. A Perform inspection of a gearbox after overhaul and or change of major components of gearbox. Perform change of gearbox oil and inspection of oil filter Perform an inspection on a contaminated (chip s) filter Check gearbox chip detectors. ATA 64 Tail Rotors Replace/ Install rotor assembly. Replace/ Install blades. Assessment of rotor blade damage i.a.w. A. Replace/ Install damper assembly. Check track. Perform rotor blade Adjusts. (Basic adjustment s) Check static balance. Check dynamic balance. F_LFA_PEL_019_B_AL_04_v1_ Page 19 of 27

20 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Troubleshoot. ATA 65 Tail Rotor Drive Replace/ Install bevel gearbox. Replace/ Install universal joints. verhaul bevel gearbox. Perform scheduled inspection on bevel gearbox i.a. A Install drive assembly. Check chip detectors. Check/install bearings and hangers. Check/service/assemble flexible couplings. Check alignment of drive shafts. Install and rig drive shafts. ATA 67 Rotorcraft flight controls Replace/ Install swash plate. ATA 71 Power Plant Replace/ Install inspect mixing box. Adjust pitch links. Rig collective system. Rig cyclic system. Rig anti-torque system. Check controls for assembly and locking. Check controls for operation and sense. Troubleshoot faulty system. Build up ECU. Replace/ Install engine. Repair / install, inspect cooling baffles. Repair, inspect cowling. Adjust cowl flaps. Repair inspect faulty wiring. Perform Troubleshoot. F_LFA_PEL_019_B_AL_04_v1_ Page 20 of 27

21 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Perform Inspection/ Repair of Compressor/ Turbines Blades - discs Assist in dry motoring check. Assist in wet motoring check. Perform change/ Installation of Ignition Glow/ Sparkplugs Perform Inspection/ Adjustment of Ignition Glow/ Sparkplugs Assist in engine start (manual mode). Perform change/ inspect, install of engine ignition components. ATA 72 Piston Engines Remove/install, inspect reduction gear box. B1.2, B1.4 Remove/install components on reduction gear box. B1.2, B1.4 Check crankshaft run-out. B1.2, B1.4 Perform differential pressure inspection B1.2, B1.4 Check tappet clearance. B1.2, B1.4 Check compression. B1.2, B1.4 Extract broken stud. B1.2, B1.4 Install helicoil. B1.2, B1.4 Perform Change/ Installation of engine ignition components B1.2, B1.4 Perform engine Ground Run and Adjustment`s (Power verification) B1.2, B1.4 Perform change/ Installation, check of Ignition Sparkplugs B1.2, B1.4 Establish/check reference RP. B1.2, B1.4 Perform Inspection/ Adjustment of Ignition Sparkplugs B1.2, B1.4 Example: Procedure for Inspection following overspeed. B1.2, B1.4 Perform Troubleshooting. B1.2, B1.4 ATA 72 Turbine Engines Replace module. B1.1, Hot section inspection/bore scope check. B1.1, Replace / inspect fan blade. B1.1, F_LFA_PEL_019_B_AL_04_v1_ Page 21 of 27

22 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Perform engine Ground Run and Adjustment`s B1.1, Carry out engine/compressor/turbine wash. B1.1, Establish reference power. B1.1, Carry out engine dry cycle. B1.1, Establish reference power. B1.1, Trend monitoring/gas path analysis. B1.1, Example: B1.1, Procedure for Inspection following overspeed. Troubleshoot. B1.1, ATA 73 Fuel and control, piston Replace engine driven pump. B1.2, B1.4 Install check carburettor/injector. B1.2, B1.4 Adjust carburettor/injector. B1.2, B1.4 Clean injector nozzles. B1.2, B1.4 Replace primer line. B1.2, B1.4 Check carburettor float setting. B1.2, B1.4 Troubleshoot faulty system. B1.2, B1.4 ATA 73 Fuel and control, turbine Replace/ Install, inspect FCU. B1.1, Replace/ Install inspect Engine Electronic Control Unit (FADEC). B1.1, Replace/ Install inspect, adjust Fuel etering Unit (FADEC). B1.1, Troubleshoot FADEC system B1.1, Replace/Install, inspect engine driven pump. B1.1, Clean/test fuel nozzles. B1.1, Clean/replace inspect filters. B1.1, Adjust FCU. B1.1, Troubleshoot faulty system. B1.1, Functional test of FADEC/FCU. B1.1, ATA 74 Ignition systems, piston Change, inspect magneto. B1.2, B1.4 Change inspect ignition vibrator. B1.2, B1.4 Change inspect plugs. B1.2, B1.4 F_LFA_PEL_019_B_AL_04_v1_ Page 22 of 27

23 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Test plugs. B1.2, B1.4 Check H.T. leads. B1.2, B1.4 Install new leads. B1.2, B1.4 Check timing. B1.2, B1.4 Check system bonding. B1.2, B1.4 Troubleshoot faulty system. B1.2, B1.4 ATA 74 Ignition systems, turbine Perform functional test of the ignition system. B1.1, Check H.T. leads. B1.1, Check glow plugs/ignitors. B1.1, Check ignition unit. B1.1, Replace ignition unit. B1.1 Troubleshoot faulty system. B1.1, ATA 76 Engine Controls Rig thrust lever. Rig RP control. Rig mixture HP cock lever. Rig fuel cut off lever Rig power lever. Rig propeller lever B1.1, B1.2 Check control sync (multi-eng). Check controls for correct assembly and locking. Check controls for range and direction of movement. Adjust pedestal micro-switches. Troubleshoot faulty system. ATA 77 Engine Indicating Replace/Install inspect engine instruments(s). F_LFA_PEL_019_B_AL_04_v1_ Page 23 of 27

24 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Replace/Install inspect oil temperature bulb. Replace/Install inspect oil pressure bulb, indicator B1.2, B1.4 Replace/Install inspect manifold pressure indicator B1.2, B1.4 Replace/Install inspect fuel flow indicator B1.2, B1.4 Replace/Install inspect RP indicator B1.2, B1.4 Replace/Install inspect thermocouples. B1.1, Perform adjustment of thermocouples Check calibration. Troubleshoot faulty system. ATA 78 Exhaust, piston Replace exhaust gasket. B1.2, B1.4 Perform inspection of valve seat clearance. B1.2, B1.4 Inspect welded repair. B1.2, B1.4 Pressure check cabin heater muff. B1.2, B1.4 Troubleshoot faulty system. B1.2, B1.4 ATA 78 Exhaust, turbine Change jet pipe. B1.2 Change shroud assembly. B1.2 Install trimmers. B1.2 Inspect/replace inspect thrust reverser. B1.2 ATA 79 il Replace inspect, adjust thrust reverser component. B1.2 Deactivate/reactivate thrust reverser. B1.2 perational test of the thrust reverser system. B1.2 Change oil. Check filter(s). Adjust pressure relief valve. Replace/ Install, inspect oil tank. Replace/ install, inspect oil pump. F_LFA_PEL_019_B_AL_04_v1_ Page 24 of 27

25 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. Replace/ install, inspect oil cooler. Replace/ Install inspect firewall shut off valve. Perform oil dilution. Troubleshoot faulty system. ATA 80 Starting Replace inspect starter. Perform inspection of starter gear and pinion Replace inspect start relay. Replace inspect start control valve. B1.1, Check cranking speed. Troubleshoot faulty system. ATA 81 Turbines, piston engines Replace/ Install / Inspect turbo-blower. B1.2, B1.4 Replace/ Install / Inspect heat shields. B1.2, B1.4 Replace/ Install / Inspect waste gate. B1.2, B1.4 Adjust density controller. B1.2, B1.4 ATA 82 Engine water injection Replace inspect water/methanol pump. B1.2,,B1.4 Flow check water/methanol system. B1.2,,B1.4 Adjust water/methanol control unit. B1.2,,B1.4 Check fluid for quality. B1.2,,B1.4 Troubleshoot faulty system B1.2,,B1.4 ATA 83 Accessory gear boxes Replace/ Install / Inspect inspect gearbox. B1.2, B1.4 Replace/ Install / Inspect drive shaft. B1.2, B1.4 Inspect magnetic chip detector. B1.2, B1.4 Additional remarks: Note each additional maintenance task witch was performed by trainee in the following columns F_LFA_PEL_019_B_AL_04_v1_ Page 25 of 27

26 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. F_LFA_PEL_019_B_AL_04_v1_ Page 26 of 27

27 According AC 66.A.45(d) Type/task training and ratings: aintenance tasks marked with are ``andatory Task``. andatory aintenance tasks must be performed by the applicant. aintenance tasks marked with are ``ptional Task`` ptional aintenance tasks are recommended to be performed by the applicant. F_LFA_PEL_019_B_AL_04_v1_ Page 27 of 27