OMNI SERIES VAPOUR RECOVERY NOZZLE

Transcription

1 VAPOUR ROVRY NOZZLS Omni Series vapour recovery nozzles are available in both ON/OFF vapour path (for multi-nozzle dispensers) and open vapour path (for single nozzle dispensers) model options. Serviceability of the nozzle is made easy with the modular two-cartridge system which allows all internalwear components of the nozzle to be quickly and easily removed from the nozzle for servicing. Standard features including no pressure-no flow, over-horizontal automatic shutoff, and full-tank shutoff ensure safe user operation as well as facilitate easy nozzle testing and servicing. ompatible with most uropean-style dispensers, hanging hardware and vapour recovery vacuum sources, Omni Series vapour recovery nozzles are easily interchangeable with most existing installations. Highlights Specifications Familiar, user-friendly and light-weight design. Modular design allows quick and easy repair and servicing. No pressure-no flow feature makes compliance testing Flow rate capability: Up to 45 lpm Working pressure: Up to 3.5 bar Low temperature rating: -25 (Standard), -40 (Low quick and clean without the use of special tools or the dispensing of fuel. Over-horizontal automatic shutoff feature helps to prevent unintentional spills. ustom scuff guard colour options. Full range of hand guard and hand guard magnet options to fit the most popular dispenser models. Standard and cold-weather model options available. Latching pin option for full-service refueling available. The ON/OFF vapour path model is for use with multi-nozzle dispensers. This model will automatically sense which nozzle is in use and close the vapour return path in the idle nozzles, preventing clean air from being pulled into the system. The Open Vapour Path model is for use with single-nozzle dispensers equipped with vapour recovery equipment. Temp) Fuel compatibility: Motor fuels including petrol up to 15% ethanol lectrical conductivity: Factory tested to <100k Ohm Internal pressure: 14 bar ody material: Aluminium Spout material: Aluminium with stainless steel tip Lever material: Glass-filled Nylon Inlet size: M34 Weight: 1,035 grams Approvals/ertifications ATX certified per the N13012 standard. TÜV approval. OMNI SRIS VAPOUR ROVRY NOZZL

2 VAPOUR ROVRY NOZZLS Specifications omponents/dimensions 57mm Spout 2 Hand guard 3 Latch pin (optional) 4 Hand guard magnet (optional) 5 Handle cover 6 Scuff guard 7 adge graphic (optional) 1 191mm mm 362mm mm Flow vs. Pressure Drop Omni Series Vapour Recovery Nozzle 1,600 1,400 Pressure Drop (mbar) 1,200 1, Flow in Litres per Minute (lpm) 50 60

3 VAPOUR ROVRY NOZZLS Ordering Guide omplete part numbers have a specific order and are created using the following guidelines and ordering diagrams: OS - V A - D - F G - H xample: OS-V0-UAMN-01N-502 = Omni Series vapour recovery nozzle, open path, unleaded, with #1 hand guard, magnet block hand guard, no latch, black scuff guard, not imprinted handle cover, no badge graphic. V = Vapour recovery nozzle A = Model options O = Open path (no vapour valve) = heck valve (on/off vapour valve) OL = Low temp. open path (-40 º) Ordering Diagrams L = Low temp. check valve (-40 º) OR = Open path w/ prepay restriction () Fuel Type R = heck valve w/ prepay restriction (F) Scuff Guard olour Options OLR = Low temp. open path (-40 º) w/ prepay restriction (H) adge Graphic Options LR = Low temp. check valve (-40 º) w/ prepay restriction () Prepay Options = Fuel Type U = Unleaded (A) Model Options = Hand guard options (G) Handle over Options A = #1 (Gilbraco, Scheidt & achmann ) = #3 (Gilbraco, Pumptronics, Scheidt & achmann) (D) Hand Guard Magnet Options = #4 (Adast, Dresser Wayne, Gilbraco, Pumptronics, Tatsuno enc, & Tokheim) () Hand Guard Latch Pin Options G = #6 (Tokheim) () Hand Guard Options H = #6 (Tokheim ) J = #8 (Dresser Wayne, Gilbarco, Hmag, Instrumentointi) K = #8D (Dresser Wayne) D = Hand guard magnet options M = Magnet block T = Two magnets (round & block) R = Round magnet W = Without magnets = Hand guard latch pin options N = No latch (self-service) Hand Guard #1 Hand Guard #3 Hand Guard #4 Hand Guard #6 Hand Guard #6 Hand Guard #8 L = Latching (full-service) F = Scuff guard colour options 00 = None 06 = Red 01 = lack 07 = Silver 02 = lue 08 = White 03 = Green 09 = Yellow 04 = Gold 10 = Light lue 05 = Orange 11 = Light Green G = Handle cover options N = Not imprinted F = FFS logo imprinted H = adge graphic options 000 = No badge 502 = Plain white badge graphic See adge Graphic Library on following page for additional badge options or contact Franklin Fueling Systems to have a custom badge graphic created. Hand Guard #8D OS = Omni Series base model

4 VAPOUR ROVRY NOZZLS Omni Series Nozzle adge Graphic Library With each Omni Series nozzle you have the option to choose from a selection of badge graphics to fit the use of the nozzle. Use the part number suffixes below in conjunction with the Ordering Guide on the previous page to create custom Omni Series nozzle part numbers

5 VAPOUR ROVRY NOZZLS Omni Series Replacement Parts H H117002Y H117002L H117002L H117002R H117002GD H117002G H117002LG H117002O H117002S H117002W H Description Vapour recovery nozzle filter screen Handguard #1 (Gilbraco, Scheidt & achmann) Handguard #3 (Gilbraco, Pumptronics, Scheidt & achmann) Handguard #4 (Adast, Dresser Wayne, Gilbraco, Pumptronics, Tatsuno enc, & Tokheim) Handguard #6 (Tokheim) Handguard #6 (Tokheim) Handguard #8 (Dresser Wayne, Gilbarco, Hmag, Instrumentointi) Handguard #8D (Dresser Wayne) lack scuffguard Yellow scuffguard lue scuffguard Light blue scuffguard Red scuffguard Gold scuffguard Green scuffguard Light green scuffguard Orange scuffguard Silver scuffguard White scuffguard Handle boot Magnet block with cover Round magnet with fastener Drawing A Model D D A A Franklin Fueling Systems rand franklinfueling.com 3760 Marsh Rd. Madison, WI 53718, USA Tel: Fax: Tel: USA & anada Tel: UK +44 (0) Tel: Mex Tel: FR +33 (0) Tel: H FFS