Installationsplan / Installation plan PW 5064 EL MOPP

Size: px

Start display at page:

Download "Installationsplan / Installation plan PW 5064 EL MOPP"

Josephine Barrett
6 years ago
Views:

1 Installationsplan / Installation plan Installatietekening Plan d`installation Piano di installazione Plano de instalación Plano de instalação Σχέδιο εγκατάστασης Asennusohje Installasjonsplan Installationsplan G PW 5064 EL MOPP Materialnummer / Mat. no.: Änderungsstand / Version: 02 Datum Zeichnung / Drawing date: Datum Legende / Legend date:

10 Technical Datasheet Washer-extractor Heating: PW 5064 MOPP Electric (EL) Legend: Circled, bold-type abbreviations: Connection required Abbreviations surrounded by broken circle: Connection optional or required, depending on model G Optional extras: UM Miele plinth UG/UO (UG = Box plinth/uo = Open plinth) Height mm 300 Width UG (UO) mm 609 (598) Depth UG (UO) mm 622 (615) BS Concrete plinth UG Height mm 750 Width mm 598 Depth mm 615 Concrete plinth (min. quality C12/15) Recommended height mm 300 Minimum height mm 70 Recommended width mm 600 Recommended depth mm 650 Ensure good anchorage! Machine connections: Electrical connection 1. Standard voltage (as supplied) V 2N AC 400 Fuse rating A 2 16 Connection cable, min. cross-sectional area mm² Length of supply lead (supplied) mm 1800 Alternative voltage V 1N AC 230 Rated load kw 2.5 Fuse rating A 1 16 Connection cable, min. cross-sectional area mm² Length of supply lead (supplied) mm 1800 convertible Installationsplan / Installation plan: PW 5064 MOPP Datum / Date: Seite / Page: 10

11 Country variations: G 2. Standard voltage (as supplied) V 1N AC 230 Rated load kw 2.5 Fuse rating A 1 13 Connection cable, min. cross-sectional area mm² Length of supply lead with plug (supplied) mm 2000 Alternative voltage V 2N AC 400 Fuse rating A 2 13 Connection cable, min. cross-sectional area mm² Length of supply lead (not supplied) 3. Standard voltage (as supplied) V 1N AC 230 Fuse rating A 1 25 Connection cable, min. cross-sectional area mm² Length of supply lead (supplied) mm 2000 convertible j S j B 4. Standard voltage (as supplied) V 3N AC 400 Fuse rating A 3 10 Connection cable, min. cross-sectional area mm² Length of supply lead (supplied) mm Standard voltage (as supplied) V 1N AC 230 Rated load kw 2.3 Fuse rating A 1 10 Connection cable, min. cross-sectional area mm² Length of supply lead (supplied) mm Standard voltage (as supplied) V 2N AC 400 Fuse rating A 2 16 Connection cable, min. cross-sectional area mm² Length of supply lead (not supplied) Alternative voltage V 1N AC 230 Rated load kw 2.5 Fuse rating A 1 16 Connection cable, min. cross-sectional area mm² Length of supply lead (not supplied) Alternative voltage V 3 AC 230 Fuse rating A 3 20 Connection cable, min. cross-sectional area mm² Length of supply lead (supplied) mm 1800 convertible convertible Installationsplan / Installation plan: PW 5064 MOPP Datum / Date: Seite / Page: 11

12 N 7. Standard voltage (as supplied) V 1N AC 230 Rated load kw 3.2 Fuse rating A 1 16 Connection cable, min. cross-sectional area mm² Length of supply lead with plug (supplied) mm Standard voltage (as supplied) V 2N AC 400 Fuse rating A 2 16 Connection cable, min. cross-sectional area mm² Length of supply lead (supplied) mm 1800 Plug and socket connection in accordance with IEC recommended to facilitate electrical safety tests. Install mains isolator according to IEC on hard-wired connection. Wall socket or mains isolator must be accessible after installation. The use of an earth leakage circuit breaker (ELCB) is strongly recommended. If an ELCB is fitted, it must be a Type B RCD able to cope with rectified three-phase supplies. If necessary, equipotential bonding with good galvanic contact must be provided in accordance with all appropriate national and local regulations. Cold water Min. flow pressure kpa 100 Max. pressure kpa 1000 Max. throughput (if hot water supply is not available) l/min 11 (11) On-site connection thread according to DIN Inch ¾" external thread Length of connection hose (parts supplied: 1 connection mm 1550 hose) Water requirements (average for 60 C programme) Standard connection (with hot water connection) l/h Approx. 80 Additional requirements if hot water supply is not available. Hot water Max. temperature C 70 Min. flow pressure kpa 100 Max. pressure kpa 1000 Max. throughput l/min 11 On-site connection thread according to DIN Inch ¾" external thread Length of connection hose (parts supplied: 1 connection mm 1550 hose) Water requirements (average for 60 C programme) Standard connection [with hot water connection] l/h Approx. 10 In absence of hot water, use blind stopper supplied and reprogramme controls to cold water intake. Or Connect hot water hose to cold water supply Drainage via dump valve Water water Fluff filter box Max. temperature C 70 Machine waste water connection (exterior) mm 75 [DN 75] On-site drain (interior) mm 75 [DN 75] Max. transient throughput l/min 62 Vented drainage required. If ventilation is insufficient, fit Miele kit, Mat. no Drain manifolds serving several machines must be of sufficient cross-section. Max. temperature C 70 Machine waste water connection (exterior) mm 75 [DN 75] Recommended on-site drain (interior) mm 75 [DN 75] Minimum on-site drain (interior) mm 50 [DN 50] Depending on on-site conditions and technical requirements, an odour trap may be required in the waste water line. Installationsplan / Installation plan: PW 5064 MOPP Datum / Date: Seite / Page: 12

13 Fittings (supplied) Miele plinth UG/UO metal angled brackets (to secure machine to plinth) 4 screws DIN 571 (Ø length) mm rawl plugs (Ø length) mm Machine must be secured if installation is on plinth! Fixing materials for floating screed floor to be provided on site Miele plinth UG metal angled brackets (to secure machine to plinth) M 10 4 screws DIN 571 (Ø length) mm 12 x 90 4 washers 4 rawl plugs (Ø length) mm 16 x 100 Machine must be secured if installation is on plinth! Fixing materials for floating screed floor to be provided on site On concrete plinth 2 metal brackets 2 screws DIN 571 (Ø length) mm rawl plugs (Ø length) mm 8 40 Machine must be secured if installation is on plinth! Fixing materials for floating screed floor to be provided on site Possible extensions The following extensions are possible: - Installation as washer-dryer stack - Liquid dispensing Machine data Width mm 595 Depth mm 725 Height mm 850 Min. access width to installation site mm 600 Minimum rear wall gap (measured to front of machine) mm 1100 Net weight kg 107 Dynamic floor load, max. N 2820 Static floor load, max. N 1455 Dynamic load, max. N 1365 Drum frequency, max. Hz 24 Average heat dissipation W 250 (dependent on ambient room temperature and programme selected) Installation should only be carried out by authorised fitters in accordance with valid regulations! Observe installation instructions when installing machine! All rights reserved! Dimensions in mm Installationsplan / Installation plan: PW 5064 MOPP Datum / Date: Seite / Page: 13

Installationsplan / Installation plan PW 5065 AV/LP

Installationsplan / Installation plan Installatietekening Plan d`installation Piano di installazione Plano de instalación Plano de instalação Σχέδιο εγκατάστασης Asennusohje Installasjonsplan Installationsplan