Installationsplan / Installation plan PW 5065 AV/LP

Transcription

1 Installationsplan / Installation plan Installatietekening Plan d`installation Piano di installazione Plano de instalación Plano de instalação Σχέδιο εγκατάστασης Asennusohje Installasjonsplan Installationsplan G PW 5065 AV/LP Materialnummer / Mat. no.: Änderungsstand / Version: 01 Datum Zeichnung / Drawing date: Datum Legende / Legend date:

2

3

4

5

6

7

8 Technical datasheet Washer-extractor Heating: PW 5065 AV/LP Electric (EL) Legend: Circled, bold-type abbreviations: Connection required Abbreviations surrounded by broken circle: Connection optional or required, depending on model G Optional extras: UM Miele plinth UG/UO 5005 (UG = Box plinth/uo = Open plinth) Height Model mm 300 Width UG (UO) mm 609 (598) Depth UG (UO) mm 622 (615) BS Concrete platform Concrete platform optional (Min. quality B15) Recommended height mm 300 Minimum height mm 70 Recommended width mm 600 Recommended depth mm 650 Ensure good anchorage! Machine connections: Electrical 1. Standard voltage (as supplied) V 2N AC 400 connection Rated load kw 5.5 Fuse rating A 2 16 Connection cable, min. cross-section mm² Length of supply lead (supplied) mm 1800 Alternative voltage V 1N AC 230 Rated load kw 2.85 Fuse rating A 1 16 Connection cable, min. cross-section mm² Length of supply lead (supplied) mm 1800 convertible Country variations: G 2. Standard voltage (as supplied) V 2N AC 400 Rated load kw 5.5 Fuse rating A 2 13 Connection cable, min. cross-section mm² Length of supply lead (supplied) mm 2000 Alternative voltage V 1N AC 230 Rated load kw 2,85 Fuse rating A 1 13 Connection cable, min. cross-section mm² Length of supply lead (supplied) mm Standard voltage (as supplied) V 1N AC 230 Rated load kw 5.5 Fuse rating A 1 25 Connection cable, min. cross-section mm² Length of supply lead (supplied) mm 2000 convertible Installationsplan PW 5065 AV/LP EL Stand: Seite 8

9 a j S B 4. Standard voltage (as supplied) V 3N AC 400 Rated load kw 4.8 Fuse rating A 3 10 Connection cable, min. cross-section mm² Length of supply lead (supplied) mm Standard voltage (as supplied) V 2N AC 400 Rated load kw 5.5 Fuse rating A 2 16 Connection cable, min. cross-section mm² Length of supply lead (supplied) mm 1800 Alternative voltage V 1N AC 230 Rated load kw 2.85 Fuse rating A 1 16 Connection cable, min. cross-section mm² Length of supply lead (supplied) mm 1800 Alternative voltage V 3 AC 230 Rated load kw 5.5 Fuse rating A 3 20 Connection cable, min. cross-section mm² Length of supply lead (supplied) mm 1800 convertible convertible N W J U l 6. Standard voltage (as supplied) V 1N AC 230 Rated load kw 3.2 Fuse rating A 1 16 Connection cable, min. cross-section mm² Length of supply lead with plug (supplied) mm Standard voltage (as supplied) V 1N AC Rated load kw Fuse rating A 1 25 Connection cable, min. cross-section mm² Length of supply lead (supplied) mm Standard voltage (as supplied) V 2 AC Rated load kw 3.75 Fuse rating A 2 20 Connection cable, min. cross-section mm² Length of supply lead with plug (supplied) mm Standard voltage (as supplied) V 2 AC 208 Frequency Hz 60 Rated load kw 3.95 Fuse rating A 2 20 Connection cable, min. cross-section mm² 4 AWG 10 Length of supply lead (supplied) mm 2000 Plug and socket connection in accordance with IEC recommended to facilitate electrical safety tests. Install mains isolator according to IEC on hard-wired connection. Wall socket or mains isolator must be accessible after installation. The use of an earth leakage circuit breaker (ELCB) is strongly recommended. If an ELCB is fitted, it must be a Type B RCD able to cope with rectified three-phase supplies. If necessary, equipotential bonding with good galvanic contact must be provided in accordance with all appropriate national and local regulations. Installationsplan PW 5065 AV/LP EL Stand: Seite 9

10 Cold water Min. flow pressure kpa 100 Max. pressure kpa 1000 Max. throughput (if hot water supply is not available) l/min 11 (11) On-site connection thread according to DIN Inch ¾" external thread Length of connection hose (parts supplied: 1 connection mm 1550 hose) Water requirements (average for 60 C programme) Standard connection [with hot water connection] l/h approx. 40 Additional requirements if hot water supply is not available. Hot water Max. temperature C 70 Min. flow pressure kpa 100 Max. pressure kpa 1000 Max. throughput l/min 11 On-site connection thread according to DIN Inch ¾" external thread Length of connection hose (parts supplied: 1 connection mm 1550 hose) Water requirements (average for 60 C programme) Standard connection [with hot water connection] l/h approx. 13 In absence of hot water, use blind stopper supplied and reprogramme controls to cold water intake. Or Connect hot water hose to cold water supply Drainage via dump valve Drainage via drain pump Max. temperature C 70 Machine drain connection (d ext s l) [DN 70] mm On-site drain connection (d int) [DN 70 sleeve] mm 75 Max. transient throughput l/min 50 Vented drainage required. If ventilation is insufficient, fit Miele kit, Mat. no Drain manifolds serving several machines must be of sufficient cross-section. Max. temperature C 70 Drain hose (Int. dia. wall thickness l) [DN 22] mm Hose sleeve for drain hose to be provided on site (ext. dia. x l) mm Max. transient throughput l/min 26 Max. head height (measured from base of unit) mm 1000 Vented drainage required. If ventilation is insufficient, fit Miele kit, Mat. no Drain manifolds serving several machines must be of sufficient cross-section. Fittings (supplied) Miele plinth UG/UO metal angled brackets (to secure machine to plinth) 4 screws DIN 571 (Ø length) mm rawl plugs (Ø length) mm Machine must be secured if installation is on plinth! Fixing materials for floating screed floor to be provided on site On concrete platform 2 metal brackets 2 screws DIN 571 (Ø length) mm rawl plugs (Ø length) mm 8 40 Machine must be secured if installation is on plinth! Fixing materials for floating screed floor to be provided on site Payment system Possible extensions The following extensions are possible: Installation of payment system Installation as washer-dryer stack Liquid dispensing Connection to serial interface, RS 232 Installationsplan PW 5065 AV/LP EL Stand: Seite 10

11 Machine data Width mm 595 Depth mm 725 Height mm 850 Min. access width to installation site mm 600 Minimum rear wall gap (measured to front of machine) mm 1100 Net weight kg 107 Dynamic floor load, max. N 2820 Static floor load, max. N 1455 Dynamic load, max. N 1365 Drum frequency, max. Hz 24 Average heat dissipation (dependent on ambient room temperature and programme selected) W 250 Installation should only be carried out by authorised fitters in accordance with valid regulations! Observe installation instructions when installing machine! All rights reserved! Measurements in mm Installationsplan PW 5065 AV/LP EL Stand: Seite 11