THE PAKA ROTARY FILLERS

Transcription

1 THE PAKA ROTARY FILLERS PAKA Automatic Rotary Fillers are quality machines built to high standards of design and construction and are of modern and functional appearance. Each is intended to give accurate and uniform fill with high performance efficiency and dependable long-life service. All PAKA automatic Rotary liquid fillers feature silent, smooth operation. Infeed and discharge conveyor and bottle timing screw are shaft and gear driven. Above elements are synchronized with main spindle drive by one variable speed adjustment wheel. All mechanical, electrical and liquid controls provided are fully automatic. All liquid handling parts are readily accessible and easy to clean. Full range adjustment is provided for container height and for liquid level. Wide variety of liquids is provided for by interchangeability of nozzle and nozzle tips. All change parts are easily and quickly interchanged from one size to another. Efficient, clean operation is assured by "no waste" automatic overflow system.

2 Outstanding features of the PAKA ROTARY FILLERS DRIVE MECHANISM Overhead drive away from liquid filling area. Features roller chain and sprockets adjustable take-up keeps timing precise. Self-aligning ball bearings utilized for durability. One wheel synchronizes spindle and conveyor speed. Safety clutch assembly prevents damage. El CHANGE PARTS Gear driven timing screw for smooth silent operation. Timing screw keyed no adjustment necessary after changeover. Adjustment in timing mechanism allows for use of all spouts or 1/2 total number of spouts. Stars and plates of one piece construction for fast change, easier handling keyed and always in alignment. Star removal effected by turn of knurled screw plate replaced by removing three hex nuts. Fabricated from linen base phenolic for superior wearing quality. EI NOZZLE CONSTRUCTION Interchangeable nozzles with interchangeable tips give added flexibility to filling operation. "0" ring construction utilized for superior sealing qualities. Standard nozzles fabricated from 18-8 stainless steels available in titanium, PVC, 316 stainless and other materials as required. Vacuum type spout heads have teflon insert allow for constant changing of filling nozzles without wear or damage. All welded construction. 4 LIQUID CONTROL SYSTEM All welded stainless steel overflow tank easily removed for cleaning. Stainless steel manifold can be removed, dismantled and cleaned quickly and simply. Teflon sealed stainless steel rotary joint no metal to metal contact affords trouble free operation reduces maintenance to a minimum.

3 SPECIFICATIONS PAKA ROTARY FILLERS Selection of the PAKA model best suited to your needs, depends on the full range of containers to be handled, the production speed required, and the flow characteristics of the liquids involved. The specifications below provide a general guide only. Filling speeds indicated are approximate and are based on liquids of water-like viscosity. Actual filling output will depend on individual liquid characteristics, container openings and efficiency of inplant liquid handling facilities. Liquids more or less viscous than water will fill proportionately slower or faster. To select the appropriate model, enter the "Container Range and Speed" chart with the diameter or width of the maximum size container to be handled and with the operating speed desired for the full range of containers to be filled. Then with the frame size indicated for the model selected, enter the "Machine Dimension" chart to determine actual floor plan dimensions. CONTAINER RANGE AND SPEED MACHINE DIMENSIONS CONTAINER RANGE (Maximum Diameter) 3-9/16" FILLING SPEED (Containers Per Minute) MODEL Pints Quarts Gallons No. Spouts FRAME (Refer to Dimensions ions Cha QR 12 AA * QR 24 B * QR 32 C in Inches FRAME SIZE AA A B C D A B C D E 31/4 4 1/2 41/2 4 1/2 41/2 F * QR 40 D * QF 12 A OVERFLOW --TANK 4-3/4" * QF 18 B * QF 24 C C * QF 30 D GF 6 A 45 B A GF 8 A ROTARY FILLER FLOOR PLAN _--TURRET 6-3/4" GF 9 B GF 12 B GF 16 C GF 20 D FEED SCREW 321/8 MIN. CONVEYOR HEIGHT 11 TABLETOP CHAIN CONVEYOR EM nMit *Will fill these sizes at every other nozzle station.

4 PAKA STRAIGHT-LINE Semi-Automatic Fillers PAKA Straight-line semi-automatic liquid fillers are built to the same exacting standards as PAKA Rotaries but are designed primarily to meet the lower speed requirements with complete versatility and minimum investment. ALL PAKA STRAIGHT-LINE FILLERS FEATURE: Interchangeable nozzles. Stainless steel liquid contact parts. No additional change parts needed complete adjustability. Simple handwheel adjustment for fill and container height. Self-aligning "T" slot spout heads for quick container size change. Clear plastic tubing. All liquid parts easy to clean. Wide choice of liquid handling and liquid control systems.

5 SPECIFICATIONS PAKA STRAIGHT-LINE FILLERS MODEL PG GRAVITY FILLERS FILL: thin, hot and cold viscous and foamy liquids ; metal, glass, polyethylene containers various shaped containers up to 12" high, 7 1/2" wide. Interchangeable nozzles 6, 8, 10 or 12 spouts. Semiautomatic operation ; stainless steel liquid contact parts and clear plastic tubing; have own liquid control tank or manifold (choice depends on filling problem) ; no motor or pump required; ideal for filling "F" type cans over quart size, and polyethylene containers. MODEL PV-1 VACUUM FILLERS FILL: thin, hot and cold viscous and foamy liquids; metal containers fractional ounces to quarts; glass containers up to gallons. Interchangeable nozzles 6, 8, 10 or 12 spouts. Semiautomatic operation ; stainless steel liquid contact parts and clear plastic tubing; have own liquid control tank ; automatic overflow assures uniform fill, equipped with vacuum pump, motor and stainless steel flat bed rail. In addition to the popular standard models indicated above, a wide variety of custom crafted straightline semi-automatic fillers is available to suit unusual requirements. Models PV-2 and PV-3 are similar to PV-1, but have no liquid control tank. PV-2 fills from mixing tank on floor ; PV-3 from drums or carboys. STRAIGHT-LINE AUTOMATICS Above models (either gravity or vacuum series) are available for fully automatic operation, complete with electropneumatic control system, motor driven conveyor chain and variable speed drive ideal where many short runs involved on a wide variety of containers. Automatic straightline units need no additional change parts. One set of nozzles fills any number of liquids and containers. i PV-IHD PV-I PGT PGT PGT LIQUID INLET, TO FLOOR 731/2 STRAIGHTLINE FILLER PGM LIQUID INLET) FLOOR PLAN TO FLOOR 631/2 GRAVITY TANK n LIQUID INLET PV-I PV-IHD 24 1 MIN. CONVEYOR HGT. 33% \ VACUUM DID CONTROL PV-I PV-IHD Filling speeds indicated below are approximate and are based on liquids of water-like viscosity. Liquids more or less viscous than water will fill proportionately slower or faster. FILLING SPEEDS GRAVITY VACUUM CONTAINER TYPE Number of Spouts Number of Spouts Fractional Ozs Pints Quarts Half Gallons Gallons

6 BOTTOM-UP FILLERS A foamless-dripless liquid gravity filler, with roller conveyor and specially designed bottom-up filling nozzles; air valve controlled, pneumatically operated; six stainless steel spouts; automatic drip pan; clear plastic tubing; 12- foot roller conveyor. MODEL SFRT FOAMLESS, DRIPLESS FILLERS FILL: foamy liquids, from quarts to 5 gallons; can fill six 1-gallon cans or four 5-gallon cans H H 25 GALLON TANK 891/2 LIQUID INLET SFRT FILLER FLOOR PLAN 92 ROLLER CONVEYOR 221/2 MIN. CONVEYOR HGT. IN-CASE FILLERS A high speed, semi-automatic vacuum or gravity filler which features in-thecase filling; 12 fully adjustable stainless steel spout assemblies, with interchangeable nozzles; handles all types of packing cases; contact parts are stainless steel; clear plastic tubing; skate wheel conveyor ; gravity models have either tank or manifold operation; vacuum models have stainless steel liquid control tank; automatic overflow. MODEL PFC CASE FILLER FILLS : thin, hot and cold viscous and foamy liquids; all types of containers, from 1/z pints to gallons, filled while in the packing case. Fp PCF-VI, PCF-VIHD PCF-M 1 32 PCF-T PCF-T GRAVITY TANK PCF-T LIQUID INLET TO FLOOR 731/2 PCF-M LIQUID INLET 1 TO FLOOR 631/2 CASE FILLER FLOOR PLAN LIQUID INLET PCF-VI PCF-VIHD MIN. CONVEYOR HGT. 35 J VACUUM LIQUID CONTROL TANK PV-I PV-IHD NEW JERSEY MACHINE CORPORATION The quality name in automatic packaging and converting machinery MAIN OFFICE AND PLANT 16th STREET AND WILLOW AVENUE, HOBOKEN, N. J TEL SALES/SERVICE: ATLANTA, BOSTON, CHICAGO, CINCINNATI, DALLAS, LOS ANGELES, PHILADELPHIA, SAN FRANCISCO