Certified ISO 9001 by
|
|
|
- Annabelle Matthews
- 6 years ago
- Views:
Transcription
1 Certified ISO 9001 by BV Æ
2 High quality sanitary fittings for the success of your pharmaceutical process PRODUCT Stainless Steel fittings comply with ASME BPE standards. All clamp gaskets compounds meet the criteria of the FDA, and some compound formulations have also been certified and accepted by the USDA, 3-A Sanitary Standard, and USP Class VI certifications. MATERIAL Fittings are fabricated in AISI 316L Stainless Steel (EN ). Sulfur controlled to 0,017% on all weld ends, allowing for consistent and high quality orbital welding process. Sulfur has the biggest impact on weld quality. SIZES Stainless Steel fittings in size 4 as standard. Larger sizes are available upon request. DIMENSIONS & TOLERANCES Dimensions according to ASTM A270 Tolerance as per ASTM A269 or as specified in ASME BPE Part DT - Table DT-5* (*for BPE fittings only). FINISH Stainless Steel fittings internal surface finish comply with ASME BPE std. as specified in ASME BPE Part SF - Table SF-4. Surface designation code SFF2. Mechanical polish consists of abrasive polishing. External surface finish: scotchbrite. MARKING Each fittings is marked with the following: heat number, size, material grade, brand name. DOCUMENTATION Material Test Reports (MTR) are delivered with the material. SPECIALTY ITEMS Contact AR Inox for information for fittings not shown in this brochure.
3 TOLERANCES TABLE DT- 5 Final tolerances for mechanically polished fittings and process components Nominal OD Wall thickness Squareness face Off Angle, Off Plane, Size mm mm to tangent, B mm O mm P mm 1/2 ±0,13 +0,13/-0,20 0,13 0,36 0,36 3/4 ±0,13 +0,13/-0,20 0,13 0,46 0,46 1 ±0,13 +0,13/-0,20 0,20 0,64 0,64 1 1/2 ±0,20 +0,13/-0,20 0,20 0,86 0,86 2 ±0,20 +0,13/-0,20 0,20 1,09 1,09 2 1/2 ±0,25 +0,13/-0,20 0,25 1,37 1,37 3 ±0,25 +0,13/-0,20 0,41 1,73 1,73 4 ±0,38 +0,20/-0,25 0,41 2,18 2,18 6 ±0,76 +0,20/-0,38 0,76 3,43 3,4 GENERAL NOTE: tolerances on E end-to-end, center-to-end: 1,27 mm. The length of the control portion C is fixed for all size at 19 mm. SURFACE FINISH TABLE SF- 4 Ra readings for fittings ASME BPE INSIDE SURFACE Surface designation Ra Average µm Ra Maximum µm Surface treatment SFF1 0,375 0,5 Mechanically polished SFF2 0,5 0,625 Mechanically polished SFF3 0,625 0,75 Mechanically polished SFF4 0,25 0,375 Mech.pol. & Electropoli. SFF5 0,375 0,5 Mech.pol. & Electropoli. SFF6 0,5 0,625 Mech.pol. & Electropoli. GENERAL NOTE: All Ra readings are taken across the lay, wherever possible. The average Ra is derived from readings taken at four cross sections approximately 90 apart. No single reading exceeding Ra max.
4 size A B C Gr. code 1/2 28,0 35,0 51, MHHS-1/2 3/4 28,0 35,0 51, MHHS-3/4 code 13MHHS - FRACTIONAL Clamp in misura unica - One size accomodates ½ and ¾ size A B C Gr. code 1 54,0 67,0 86, MHHM-1 1 1/2 54,0 67,0 86, MHHM-1 1/2 2 67,5 81,0 101, MHHM-2 2 1/2 81,0 94,0 114, MHHM-2 1/2 3 94,5 105,0 126, MHHM ,5 134,0 156, MHHM ,0 185,0 216, MHHM ,0 235,0 270, MHHM ,0 285,0 325, MHHM ,0 340,0 380, MHHM-4 code 13MHHM Clamp a due settori con doppio snodo - Double pin heavy duty clamp Size size A B C Gr. code 1 52,0 69,0 80, MHHS-1 1 1/2 52,0 69,0 80, MHHS-1 1/2 2 65,5 82,0 95, MHHS-2 2 1/2 79,0 97,0 105, MHHS-2 1/2 3 92,5 109,0 125, MHHS ,5 133,0 155, MHHS-4 code 13MHHS Clamp a 3 settori - 3 Pieces heavy duty clamp Size 4 size A B C Gr. code 3/4 28,0 37,0 55, MHP-3/4 1 52,0 69,0 103, MHP-1 1 1/2 52,0 69,0 103, MHP-1 1/2 2 65,5 82,0 115, MHP-2 2 1/2 79,0 97,0 128, MHP-2 1/2 3 92,5 109,0 141, MHP ,5 133,0 167, MHP-4 code 13MHP Clamp per alte pressioni - High pressure clamp Size 4 PRESSIONI max di esercizio in Kg/cm 2 - bar Service Rating tubo OD 1/2-3/ / / MHHM coppia serraggio galletto - wing nut tightened to = 2,8 Nm of 21 C C 82, MHHS coppia serraggio galletto - wing nut tightened to = 2,8 Nm of 21 C C MHP coppia serraggio bulloni - bolt tightened to = 27,1 Nm of 21 C C Le pressioni max riportate in tabella si basano su risultati ottenuti da prove idrauliche utilizzando guarnizioni standard in Buna-U. Per temperature superiori a 121 C si raccomanda di utilizzare solo il clamp tipo 13MHP. Service rating are based on hydrostatic tests using standard Buna-U gaskets. For temperature above 121 C we recommend using only 13MHP clamp only.
5 size A B C Thk code 1/2 12,7 12,7 25,2 1,65 14WMP-1/2 3/4 19,05 12,7 25,2 1,65 14WMP-3/4 1 25,4 12,7 50,4 1,65 14WMP-1 1 1/2 38,1 12,7 50,4 1,65 14WMP-1 1/2 2 50,8 12,7 64,0 1,65 14WMP-2 2 1/2 63,5 12,7 77,4 1,65 14WMP-2 1/2 3 76,2 12,7 90,0 1,65 14WMP ,6 15,8 118,8 2,11 14WMP-4 code 14WMP Tronchetto a saldare corto - Short Welding Ferrule Cod. BS14AM BPE TABLE # DT-22 code L14AM7 size A B B-BPE C code 1/2 12,7 28,0 44,5 25,2 L14AM7-1/2 3/4 19,05 28,0 44,5 25,2 L14AM7-3/4 1 25,4 28,6 44,5 50,4 L14AM /2 38,1 28,6 44,5 50,4 L14AM7-1 1/2 2 50,8 28,6 57,2 64,0 L14AM /2 63,5 28,6 57,2 77,4 L14AM7-2 1/2 3 76,2 28,6 57,2 90,0 L14AM ,6 28,6 57,2 118,8 L14AM7-4 Tronchetto a saldare per orbitale - Orbital welding Ferrule size A B C Thk code 6 152,4 28,0 166,67 2,77 14WLMO ,2 28,0 217,67 2,77 14WLMO ,0 28,0 268,48 2,77 14WLMO ,8 28,0 319,27 2,77 14WLMO-12 code 14WLMO Tronchetto a saldare per orbitale - Orbital welding Ferrule size A B C Thk code 1/2 Not available 3/4 Not available 1 25,4 76,2 50,4 1,65 14WLMP-1 1 1/2 38,1 76,2 50,4 1,65 14WLMP-1 1/2 2 50,8 76,2 64,0 1,65 14WLMP-2 2 1/2 63,5 76,2 77,4 1,65 14WLMP-2 1/2 3 76,2 101,6 90,0 1,65 14WLMP ,6 101,6 118,8 2,11 14WLMP-4 code 14WLMP Tronchetto a saldare lungo - Long Welding Ferrule (Light) size A B C Thk code 1/2 Not available 3/4 Not available 1 29,5 41,3 50,4 3,85 14MPW-1 1 1/2 42,6 41,3 50,4 4,05 14MPW-1 1/2 2 55,7 44,4 64,0 4,25 14MPW-2 2 1/2 68,8 44,4 77,4 4,45 14MPW-2 1/2 3 81,9 46,0 90,0 4,65 14MPW ,1 54,0 118,8 5,65 14MPW-4 code 14MPW Tronchetto a saldare spessorato - Welding Ferrule (Heavy)
6 Cod. B2CMP-90 ASME BPE-2002 compliant BPE TABLE # DT-16 code 2CMP - 90 ELL Cod. B2KMP-45 BPE TABLE # DT-17 code 2KMP - 45 ELL Cod. B7MP ASME BPE-2002 compliant BPE TABLE # DT-18 code 7MP Cod. B7RMP BPE TABLE # DT-19 code 7RMP-TC size A B C A-BPE code 1/2 25,2 41,3 2CMP-90-1/2 3/4 25,2 41,3 2CMP-90-3/4 1 50,8 25,4 50,4 50,8 2CMP /2 69,9 38,1 50,4 69,9 2CMP /2 2 88,9 50,8 64,0 88,9 2CMP /2 108,0 63,5 77,4 108,0 2CMP / ,0 76,2 90,0 127,0 2CMP ,3 101,6 118,8 168,3 2CMP-90-4 Curva clamp Elbow clamp ends size A B C A-BPE code 1/2 25,2 25,4 2KMP-45-1/2 3/4 25,2 25,4 2KMP-45-3/4 1 28,6 25,4 50,4 28,6 2KMP /2 36,5 38,1 50,4 36,5 2KMP /2 2 44,5 50,8 64,0 44,5 2KMP /2 52,4 63,5 77,4 52,4 2KMP /2 3 60,3 76,2 90,0 60,3 2KMP ,4 101,6 118,8 79,4 2KMP-45-4 Curva clamp Elbow clamp ends size A B C B-BPE code 1/2 25,2 57,2 7MP-1/2 - from bar 3/4 25,2 60,3 7MP -3/4 - from bar 1 120,6 60,3 50,4 66,7 7MP /2 139,8 69,9 50,4 73,0 7MP -1 1/ ,8 88,9 64,0 85,7 7MP /2 177,8 88,9 77,4 92,1 7MP -2 1/ ,6 95,5 90,0 98,4 7MP ,6 114,3 118,8 120,7 7MP -4 Tee clamp - Tee clamp ends size A B A-BPE B-BPE code 1 x ¾ 66,7 66,7 7RMP-1 1/2 x 3/4 1 ½ x 1 69,9 66,7 73,0 73,0 7RMP-1 1/2 x 1 2 x 1 88,9 66,7 85,7 79,4 7RMP-2 x 1 2 x 1 ½ 88,9 76,2 85,7 79,4 7RMP-2 x 1 1/2 2 ½x 1 ½ 88,9 82,6 92,1 85,7 7RMP-2 1/2 x 1 1/2 2 ½x 2 88,9 95,3 92,1 85,7 7RMP- 2 1/2 x 2 3 x 1 ½ 95,3 88,9 98,4 92,1 7RMP- 3 x 1 1/2 3 x 2 95,3 101,6 98,4 98,4 7RMP- 3 x 2 3 x 2 ½ 95,3 95,3 98,4 98,4 7RMP- 3 x 2 1/2 4 x 2 114,3 114,3 120,7 111,1 7RMP- 4 x 2 4 x 2 ½ 114,3 104,8 120,7 111,1 7RMP- 4 x 2 1/2 4 x 3 114,3 104,8 120,7 111,1 7RMP- 4 x 3 Tee clamp ridotto - Reducing tee clamp ends Cod. B9MP ASME BPE-2002 compliant BPE TABLE # DT-18 code 9MP size A B A-BPE B-BPE code 1/2 114,4 57,2 9MP-1/2 - from bar 3/4 120,6 60,3 9MP-3/4 - from bar 1 133,4 66,7 133,4 66,7 9MP-1 1 1/2 146,0 73,0 146,0 73,0 9MP-1 1/ ,8 88,9 171,4 85,7 9MP-2 2 1/2 177,8 88,9 184,2 92,1 9MP-2 1/ ,6 95,3 196,8 98,4 9MP ,6 114,3 241,4 120,7 9MP-4 Croce clamp - Cross clamp ends
7 code 16AMP code 31-14MP Cod.B31/32 14MP ASMEBPE-2002 compliant BPE TABLE # DT-21 code 32-14MP Tappo clamp cieco - Clamp solid end cap size B C code ½ - ¾ 25,2 4,7 16AMP-3/ /2 50,4 6,4 16AMP-1 1/2 2 63,9 6,4 16AMP-2 2 1/2 77,4 6,4 16AMP-2 1/2 3 90,9 6,4 16AMP ,9 6,4 16AMP ,9 11,1 16AMP ,7 11,1 16AMP ,5 14,3 16AMP ,3 14,3 16AMP-12 Riduzione concentrica clamp - Concentric reducer clamp ends size A A-BPE code ¾ x ½ 50,8 50,8 31/32-14MP-¾ x ½ 1 x ½ 63,5 63,5 31/32-14MP-1 x ½ 1 x ¾ 50,8 50,8 31/32-14MP-1 x ¾ 1 ½ x ¾ 76,2 76,2 31/32-14MP-1 ½x ¾ 1 ½ x 1 76,2 76,2 31/32-14MP-1 ½x 1 2 x 1 127,0 127,0 31/32-14MP-2 x1 2 x 1 ½ 76,2 76,2 31/32-14MP-2 x1 ½ 2 ½ x1 ½ 127,0 127,0 31/32-14MP-2 1/2x1 ½ 2 ½ x 2 76,2 76,2 31/32-14MP-2 1/2x2 3 x 1 ½ 177,8 177,8 31/32-14MP-3 x1 ½ 3 x 2 127,0 127,0 31/32-14MP-3 x 2 3 x 2 ½ 76,2 76,2 31/32-14MP-3 x 2 1/2 4 x 2 231,8 231,8 31/32-14MP-4 x 2 4 x 2 ½ 181,0 181,0 31/32-14MP-4 x 2 1/2 4 x 3 130,2 130,2 31/32-14MP-4 x 3 Riduzione eccentrica clamp - Eccentric reducer clamp ends code 22MP Adattatore femmina - Female adapters (non 3A) code 21MP Adattatore maschio - Male adapters (non 3A) size A B code 1/2 3/4 1 Thread profile 1 1/2 2 BSPP/Cylindrical gas 2 1/2 B= ON REQUEST 3 4 size A B code 1/2 3/4 Thread profile 1 - BSPP/Cylindrical gas 1 1/2 2 - BSPT/Conical gas 2 1/2 - NPT 3 4 B= ON REQUEST BSPP/CYLINDRICAL GAS BSPT/CONICAL GAS NPT H= 0,9604 x Pitch h= 0,6403 x Pitch r= 0,1373 x Pitch H= 0,9604 x Pitch h= 0,6403 x Pitch r= 0,1373 x Pitch conicalness =6,25% H= 0,866 x Pitch h= 0,800 x Pitch conicalness =6,25% THREAD PROFILE Ask for sizes not shown in this brochures.
8 codice materiale size 42MP-U BUNA 1/2 e 3/4 42MP-X SILICONE 1/2 e 3/4 42MP-E EPDM 1/2 e 3/4 42MP-G PTFE 1/2 e 3/4 42MP-SFY VITON 1/2 e 3/4 tipo FRACTIONAL cod. 42MP Guarnizione disponibile in due misure: 1/2 e 3/4 Tipo più comunemente usato ed economico. È disponibile da ½ a 12. Standard-Molded, one piece O-ring Gasket is economical, dependable. Available from stock ½ 12. Sanitary Clamp Gaskets All clamp gaskets compounds meet the criteria of the FDA, and some compound formulations have also been certified and accepted by the USDA, 3-A Sanitary Standard, and USP Class VI certifications. codice materiale size 40MP-U BUNA 4 40MP-X SILICONE 4 40MP-E EPDM 4 40MP-G PTFE 12 40MP-SFY VITON 4 tipo 1 cod. 40MP Guarnizione standard in un solo pezzo tipo economico Tipo flangiato per essere tenuto in posizione. È disponibile da 1 a 12. Flanged-Molded, flanged O-ring Gasket with special snap-on rim design. Fits snugly and stays in position. Available from stock codice materiale size 40MPF-X SILICONE 12 40MPF-E EPDM 12 40MPF-SFY VITON 12 tipo 2 cod. 40MPF Guarnizione a labbro autocentrante Tipo con rivestimento esterno in TEFLON e inserzione di VITON. È disponibile da 1 a 4. codice materiale size A40MP-GR PTFE+VITON 4 Envelope Gasket has teflon outer jacket with a V-envelope type section to sandwich a VITON rubber insert. Available from stock 1 4. tipo 3 cod. A40MP-GR Guarnizione in VITON rivestita esternamente in PTFE Normalmente utilizzate per la realizzazione di dischi calibrati. Normally used for prepare flange orifice. codice materiale size A80MP-G PTFE 2 tipo SOLID cod. A80MP-G Guarnizione in PTFE cieca Type 316 Stainless steel 0,023 dia. wire width of opening 0,75 inches between wires. codice materiale size A40MP-US-E EPDM 4 A40MP-US-SFY VITON 4 A40MP-US-X SILICONE 4 tipo SCREEN GASKET cod. 40MP-US Reti filtranti
9 PERFORMANCE PROPERTIES Property Tensile Strenght Nitrile(Bruna-U) Ethylene-Propylene (EPDM-E) Silicone (X) Fluoroelastomer (Viton -SFY) Teflon PTFE (G) Fair- - - Electrical Properties Weather Resistance Fair Heat Resistance (99 C) (149 C) (232 C) (177 C) (232 C) Cold Resistance Ozone Resistance Fair- (-54 C) - (-51 C) (-62 C) (-29 C) Fair (-40 C) Steam Resistance Tear Resistance Fair Abrasion - - Acid Resistance - Flame Resistance Vegetable Oil (Most) (Intermittent) Petroleum Oil Buna-N is not reccommended for use with CIP Sanitizing Agent OXONIA; use EPDM or Silicone. Silicone-X is not reccommended for use with glicerina. Guarnizioni prodotte in quattro versioni base in una varietà di materiali atossici, non igroscopici. Gaskets are produced in four basic designs in a variety of materials that are non-toxic, absorbent free. Meet U.S. Pharmacopoeia Class VI Comply with title 21 CFR Comply with USDA and 3A sanitary standard
10 Weld ends fitting code 2WCL - 90 code 2WK - 45 Cod. B2S- 90 BPE TABLE # DT-7 code L2S - 90 Cod. B2KS- 45 BPE TABLE # DT-8 code L2KS - 45 Cod. B7WWW BPE TABLE # DT-9 code 7WWW size A B Thk code 1/2 12,7 1,65 2WCL-90-1/2 3/4 19,05 1,65 2WCL-90-3/4 1 38,1 25,4 1,65 2WCL /2 57,2 38,1 1,65 2WCL /2 2 76,2 50,8 1,65 2WCL /2 95,3 63,5 1,65 2WCL / ,3 76,2 1,65 2WCL ,4 101,6 2,11 2WCL-90-4 Curva saldare Elbow weld ends size A B Thk code 1/2 12,7 1,65 2WK-45-1/2 3/4 19,05 1,65 2WK-45-3/4 1 15,9 25,4 1,65 2WK /2 23,8 38,1 1,65 2WK /2 2 31,8 50,8 1,65 2WK /2 39,7 63,5 1,65 2WK /2 3 47,6 76,2 1,65 2WK ,5 101,6 2,11 2WK-45-4 Curva saldare Elbow weld ends size A A-BPE B code 1/2 76,2 12,7 L2S-90-1/2 3/4 76,2 19,05 L2S-90-3/4 1 52,4 76,2 25,4 L2S /2 74,6 95,3 38,1 L2S / ,2 120,7 50,8 L2S /2 131,8 139,7 63,5 L2S / ,3 158,8 76,2 L2S ,1 203,2 101,6 L2S-90-4 Curva saldare in orbitale Tube bend size A A-BPE B code 1/2 57,2 12,7 L2KS-45-1/2 3/4 57,2 19,05 L2KS-45-3/4 1 30,2 57,2 25,4 L2KS /2 41,3 63,5 38,1 L2KS /2 2 58,7 76,2 50,8 L2KS /2 76,2 85,7 63,5 L2KS /2 3 93,7 92,1 76,2 L2KS ,2 114,3 101,6 L2KS-45-4 Curva saldare in orbitale Tube bend size A B A-BPE B-BPE code 1/2 95,2 47,6 7WWW-1/2 3/4 101,6 50,8 7WWW-3/4 1 95,2 47,6 108,0 54,0 7WWW-1 1 1/2 114,4 57,2 120,6 60,3 7WWW-1 1/ ,4 76,2 146,0 73,0 7WWW-2 2 1/2 152,4 76,2 158,8 79,4 7WWW-2 1/ ,2 82,6 171,4 85,7 7WWW ,8 98,4 209,6 104,8 7WWW-4 Tee a saldare - Tee welds ends
11 Cod. B7RWWW BPE TABLE # DT-10 code 7RWWW Cod. B9WWWW BPE TABLE # DT-9 code 9WWWW code 31W Cod. B31/B32 BPE TABLE # DT-11 code 32W code 14MPHR Portagomma clamp - Clamp rubber hose code 14MPHRS Portagomma clamp speciali - Special clamp rubber hose Tee ridotto a saldare - Reducing tee weld ends Croce a saldare - Cross weld ends size A B A-BPE B-BPE code 1 x ¾ 54,0 54,0 7RWWW-1 1/2 x 3/4 1 ½ x 1 57,2 54,0 60,3 60,3 7RWWW-1 1/2 x 1 2 x 1 76,2 60,3 73,0 66,7 7RWWW-2 x 1 2 x 1 ½ 76,2 63,5 73,0 66,7 7RWWW-2 x 1 1/2 2 ½x 1 ½ 76,2 69,9 79,4 73,0 7RWWW-2 1/2 x 1 1/2 2 ½x 2 76,2 82,6 79,4 73,0 7RWWW- 2 1/2 x 2 3 x 1 ½ 82,6 76,2 85,7 79,4 7RWWW- 3 x 1 1/2 3 x 2 82,6 88,9 85,7 79,4 7RWWW- 3 x 2 3 x 2 ½ 82,6 82,6 85,7 79,4 7RWWW- 3 x 2 1/2 4 x 2 98,4 101,6 104,8 98,4 7RWWW- 4 x 2 4 x 2 ½ 98,2 95,3 104,8 98,4 7RWWW- 4 x 2 1/2 4 x 3 98,2 95,3 104,8 98,4 7RWWW- 4 x 3 size A B A-BPE B-BPE code 1/2 95,2 47,6 9WWWW-1/2 3/4 101,6 50,8 9WWWW-3/4 1 95,2 47,6 108,0 54,0 9WWWW-1 1 1/2 114,4 57,2 120,6 60,3 9WWWW-1 1/ ,4 76,2 146,0 73,0 9WWWW-2 2 1/2 152,4 76,2 158,8 79,4 9WWWW-2 1/ ,2 82,6 171,4 85,7 9WWWW ,8 98,4 209,6 104,8 9WWWW-4 Riduzione concentrica a saldare - Concentric reducer weld ends size A B-BPE code ¾ x ½ 101,6 31/32W-¾ x ½ 1 x ½ 114,3 31/32W-1 x ½ 1 x ¾ 101,6 31/32W-1 x ¾ 1 ½ x ¾ 127,0 31/32W-1 ½x ¾ 1 ½ x 1 50,8 127,0 31/32W-1 ½x 1 2 x 1 101,6 184,2 31/32W-2 x1 2 x 1 ½ 50,8 133,4 31/32W-2 x1 ½ 2 ½ x 1 235,0 31/32W-2 ½x1 2 ½ x1 ½ 184,2 31/32W-2 1/2x1 ½ 2 ½ x 2 50,8 139,7 31/32W-2 1/2x2 3 x 1 ½ 152,4 235,0 31/32W-3 x1 ½ 3 x 2 101,6 190,5 31/32W-3 x 2 3 x 2 ½ 50,8 139,7 31/32W-3 x 2 1/2 4 x 2 203,2 298,5 31/32W-4 x 2 4 x 2 ½ 152,4 247,7 31/32W-4 x 2 1/2 4 x 3 101,6 196,9 31/32W-4 x 3 Riduzione eccentrica a saldare - Eccentric reducer weld ends SPECIALTY ITEMS Ask for sizes not shown in this brochures. size A B code 1/2 28,0 12,7 14MPHR-1/2 3/4 32,0 19,05 14MPHR-3/4 1 45,0 25,4 14MPHR-1 1 1/2 45,0 38,1 14MPHR-1 1/2 2 60,0 50,8 14MPHR-2 2 1/2 65,0 63,5 14MPHR-2 1/2 3 80,0 76,2 14MPHR ,0 101,6 14MPHR-4 size A B available code ½ 28, ,7-13,7 14MPHRS-1/2 1 38, ,7 13, ,3 14MPHRS-1 1 ½ 38, MPHRS-1 1/2 2 38, ,7-13, ,3-25, , MPHRS-2
A Full Line of Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical, and Electronics Processing Industries PUMPS VALVES FITTINGS TUBING GAUGES
get connected with clamp fittings Bradford Company, Inc
get connected with clamp fittings Bradford Company, Inc. 800.789.78 www.bradfordfittings.com 2 clamp fittings clamps end caps hangers ferrules elbows tees laterals reducers For the right fitting at Your
Bradford Clamp Fittings
Complete ing Connection radford range: ½" - 12" Product Specifications 621 63-03 Ferrule Materials: G = 304 stainless steel R = 316L stainless steel other alloys are available Finish: 3 sanitary finish
PRODUCT CATALOG. PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY
PRODUCT CATALOG www..accuflowsystems.com----ph:--240.457.443 PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY CLASS VI SILVERBACK TM CLAMP GASKETS mini gaskets 42RX-E EPDM 42RX-SFY Viton /2 & 3 /4 42RX-SFYETP
PRODUCT CATALOG PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY
PRODUCT CATALOG PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY CLASS VI SILVERBACK TM CLAMP GASKETS MINI GASKETS 42RX-E EPDM 42RX-SFY Viton /2 & 3 /4 42RX-SFYETP Viton 42RX-SFYGF Viton 42RX-PX Silicone
kyin all shapes, sizes and standards
. kyin all shapes, sizes and standards Fittings from Alfa Laval - Tri-Clover Application Alfa Laval is your complete source for specialized fittings and tubing required in food, dairy, beverage, personal
The Clamped UNION is the critical element for evaluating pipeline pressure capacity
S-LINE CLMPS PRESSURE RTINGS: CLMP vs. UNION WHICH IS THE CRITICL VLUE TO PPLY? Some manufacturers display pressure ratings of their clamp. But the clamp alone is not the critical value to apply. The Clamped
SEALING SYSTEMS. ISO & DIN Gaskets
SEALING ISO & DIN Gaskets ISO & DIN Clamp Gaskets SEALING Sanitary Gasket s ISO #2852 And DIN #32676 Sanitary Gasket s ISO #2852 and DIN #32676 hygienic flanged clamp gaskets are manufactured to FDA and
A Full Line of Stainless Steel Flow Control Equipment for the Food, Beverage, and Dairy Processing Industries PUMPS VALVES FITTINGS TUBING CUSTOM FABRICATIONS www.toplineonline.com Table of Contents Type
ACL Gasket Materials Operating Temperature Range
ACL Gasket Materials Operating Temperature Range PHARMACEUTICAL DATA SHEET 275 250 225 250 C 250 C 250 C 260 C 200 200 C 175 150 150 C 125 100 75 50 25 30 C 0 EPDM SILICONE VITON PTFE PEEK TFM -25-50 -75-50
Dixon Sanitary Fittings Catalog. Featuring Bradford Products DPL112. bradfordfittings.com Customer Service:
ING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTURIN DPL112 Dixon Sanitary Featuring Bradford Products 2012 Fittings Catalog bradfordfittings.com Customer Service: 800.789.1718
Flange Pneurop - ISO Pneurop ISO Flanges
Flange Pneurop - ISO Pneurop ISO Flanges 1 - Griffa Claw grip 2 - Anello centraggio Centering ring 3 - Flangia Flange 4 - Flangia Girevole Rotary flange 5 - Griffa a parete Wall clamp 6 - Parete Wall Utilizzabili
O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI
O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI O -Rings PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Newman Elastomer Characteristics If you don t know the
Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2014. From the materials
Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials
Sanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A
01 SANITARY PIPE FITTING Sanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A 02 FERRULE / UNION / PIPE HOLDER Ferrule End Cap Ferrule Clamp Ferrule Gasket
DIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
Plain Ended Welding Fittings BS 4825 Part 2
Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric
PRODUCT CATALOG PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY
PRODUCT CATALOG PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY CLASS Vi SiLVErBACK TM CLAMP GASKETS Mini GASKETS 42RX-E EPDM 42RX-SFY Viton 1 /2 & 3 /4 42RX-SFYETP Viton 42RX-SFYGF Viton 42RX-PX Silicone
Valvola a sfera sanitaria manuale. Manual sanitary ball valve
Valvola a sfera sanitaria manuale Manual sanitary ball valve Valvola a sfera sanitaria manuale Manual sanitary ball valve elemento element qtà quantity Elenco parti / Parts list descrzione description
Linea - Line. raccordi a compressione compression fittings
5300 Linea - Line raccordi a compressione compression fittings Raccordi a compressione/ Compression fittings SYSTEM FIELDS OF APPLICATION Mainly used in distribution systems for drinking water, sanitary
Dixon Sanitary 2010 Catalog
Distributed y: Dixon Sanitary 2010 Catalog New Products Clamp Fittings European Fittings p.2 p.15 Pipe Fittings evel Seat Fittings C p.39 D p.44 John Perry Fittings E p.50 F p.61 I-Line & Q-Line Fittings
Evans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
Dixon Sanitary. Bradford High Purity BioPharm Line. bradfordfittings.com Customer Service:
NUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACT Bradford High Purity BioPharm Line bradfordfittings.com Customer Service: 800.789.1718 Literature Order
Sanitary Fittings & Valves. Quick-Connect Couplers. Male Quick-Connect Couplers. Female Quick-Connect Couplers
Quick-Connect Couplers These Quick-Connect couplers are ideal for compressed gas applications due to their unique eight stainless steel ball bearing seal system, which prevents leaks. They are machined
Hygienic Products. RJT BS 4825 Part 5, Couplings and Gaskets. DIN 11851/11887, Couplings and Gaskets. IDF BS:4825 Part 4 Couplings and Gaskets
Hygienic Products Hygienic Product Range and Specifications pages 1-2 RJT BS 4825 Part 5, Couplings and Gaskets pages 3-7 DIN 11851/11887, Couplings and Gaskets pages 8-12 IDF BS:4825 Part 4 Couplings
Clamp connection DIN / ISO 1127 / ISO 2852 / ASME / BS Ferrules / gaskets / heavy duty clamps / hose adaptors...
MP ONNETION str. H121 Z121 lamp 32676 / 1127 / 2852 / SME / BS 4825... Ferrules / gaskets / heavy duty clamps / hose adaptors... MDE OF STINESS... RMT spol. s r. o. Řetová 82, 561 41 zech Republic MP ONNETION
High Quality Replacement Parts for the Sanitary Processing Industries
High Quality Replacement Parts for the Sanitary Processing Industries Valve Stems Rotors Check Balls Sanitary Gaskets Sanitary O-Rings Pump & Valve Kits DSO Fluid Handling The Trusted Supplier of Sanitary
Transition Fittings Giunti di transizione price list 2016 listino prezzi 2016
Transition Fittings Giunti di transizione price list 2016 listino prezzi 2016 INDEX INDICE COD PAG GALVANIZED TRANSITION FITTING TO WELD PE100 SDR11 GIUNTO ZINCATO A SALDARE PE100 SDR11 100 10 GAS GALVANIZED
Section G Series 77 High Purity Ball Valve Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com
Equipment - Thread Identification Kit Flanges Gaskets Gauges Hydraulic Preset Tools Sight Glass...
Equipment - Thread Identification Kit...-6 Flanges...-1-2 Gaskets...-3 Gauges...-4 Hydraulic Preset Tools...-5 Sight Glass...-7 Sight Glass - /Replacement Parts...-7 Systems...-8-13 ACCESSORIES If you
Company Profile Perfil de Empresa Unternehmen PHARMA
Company Profile Perfil de Empresa Unternehmen PHARMA Introduction Ultrapharma BV was founded in 2002 in the Netherlands, starting as Master Distributor for Rubberfab Technologies Group, a leading company
Diaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection
Diaphragm seals Diaphragm seal with sterile connection For sanitary applications Models 990.18, 990.19, 990.20 and 990.21, threaded connection WIKA data sheet DS 99.40 for further approvals see page 3
Dixon Sanitary General Products. dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU General Products dixonvalve.com Customer Service: 877.963.4966 : maintaining the standard of quality The
operated system. Due to their large opening areas, minimize turbulence, offer low pressure drop and provide gentle treatment of low
Butterfly Valve VF... operated system. Due to their large opening areas, minimize turbulence, offer low pressure drop and provide gentle treatment of low and medium viscosity product. The handle mechanically
Weir-Style Diaphragm Valves
www.swagelok.com Weir-Style Diaphragm s GSI Series Available in sizes 1/2 to 4 Available with a variety of end connections, including Kwik-Clamp and TS series sanitary clamp and tube butt weld 2 Weir-Style
Bioprocessing Equipment
ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY 10016 CONTENTS Foreword... vii Statements of Policy... viii Committee Roster...
BEVERAGE CATALOG Hose For Every Service Since 1932
BEVERAGE CATALOG Hose For Every Service Since 1932 Beverage Transfer Hose Extremeflex Beverage Red with EZ Clean Cover Construction: Tube: White Chlorobutyl (FDA/USDA compliant and conforms to 3-A Sanitary
Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models , and
Pressure Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models 990.22, 990.52 and 990.53 WIKA data sheet DS 99.41 for further approvals see page 7 Applications Sanitary applications
Fluid Filtration. Protecting Product and Equipment from Particulates
New Camlock Screens Inside! Fluid Filtration Protecting Product and Equipment from Particulates Rubber Fab s Fluid Filtration Gaskets Rubber Fab s sanitary fluid filtration gaskets are designed to be interchangeable
JSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
Fluid Filtration. Protecting Product and Equipment from Particulates
New Camlock Screens Inside! Fluid Filtration Protecting Product and Equipment from Particulates Rubber Fab s Fluid Filtration Gaskets Rubber Fab s sanitary fluid filtration gaskets are designed to be interchangeable
VALVOLE A SFERA A PASSAGGIO TOTALE, SERIE EXTRA PESANTE PN50 ( 9 filetti) Ball valves full bore, Extra Heavy Type (9 threads)
A PASSAGGIO TOTALE, SERIE EXTRA PESANTE PN50 ( 9 filetti) Ball valves full bore, Extra Heavy Type (9 threads) Caratteristiche tecniche Technical features Corpo e sfera : Ottone CW617N UNI EN 12165 Asta
RUBBER FAB PURITY: 30 IN./LBS TR
RUBBER FAB PURITY: The Complete Platinum Cured Silicone Program High purity platinum cured silicone gaskets are the ideal choice for use in production facilities of fine pharmaceutical, biotechnology,
BEVERAGE CATALOG Hose For Every Service Since 1932
BEVERAGE CATALOG Hose For Every Service Since 1932 Recommended for Breweries Extremeflex Beverage Red with EZ Clean Cover Construction: Tube: White Chlorobutyl (FDA/USDA compliant and conforms to 3-A Sanitary
Tri-Clover Fractional Valves FV-00
Tri-Clover FV-00 Applications The Tri-Clover range of fractional valves has been designed for applications requiring a secure, sanitary or sterile environment within the food, beverage, pharmaceutical,
M80i ISO Stainless Steel Ball Valve for Sanitary Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
O RINGS FDA AND USP CLASS VI
O RINGS FDA AND USP CLASS VI PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Elastomer Characteristics If you don t know the size or number of the O -Ring, you will need to determine
Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
NEW CAMLOCK SCREENS INSIDE! FLUID FILTRATION
NEW CAMLOCK SCREENS INSIDE! FLUID FILTRATION Protecting Product and Equipment from Particulates Rubber Fab s Fluid Filtration Gaskets Rubber Fab s sanitary fluid filtration gaskets are designed to be interchangeable
JSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
Mark 95 Series. Sanitary Valves Mark 95 Sanitary Back Pressure Regulators. Sanitary Back Pressure Regulators
Mark 95 Series CRN Registration Number vailable Sanitary Back Pressure Regulators The Mark 95 is available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited
TUF-STEEL A FULL LINE OF WORLD CHAMPION GASKETS
Rubber Fab Technologies Group s TUF-STEEL A FULL LINE OF WORLD CHAMPION GASKETS IS THE TRUE CHAMPION BECAUSE GOES THE DISTANCE. Composed of a unique proprietary blend of non-pigmented PTFE and 316L passivated
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1200AD/E 01 2004 SINGLE SEAT TWO WAYS PED 97/23/CE Art.3 Section 3 TYPE 1200 AD Normally open Air closes DESCRIPTION The 1200 HYGIENIC pneumatic control valves are with
LIMITED WARRANTY. Some products and sizes may be discontinued when stock is depleted, or may require a minimum quantity for ordering.
LIMITED WRRNTY Bradford, a division of Dixon Valve and Coupling Company, (herein called "Bradford") warrants the products described herein, and manufactured by Bradford to be free from defects in material
Stainless Products, Inc.
Stainless Products, Inc. CAT. 2012-00 www.stainless-products.com Sanitary Air s & Butterfly s Stainless Products, Inc. 1649 72nd Avenue Somers, WI 53171 Ph: 800-558-9446 262-859-2826 Fax: 262-859-2871
Sanitary Check Valves A solution for the prevent reverse flow and cross contamination.
BOLLETTINO VRN-16 Sanitary Check Valves A solution for the prevent reverse flow and cross contamination. DESCRIPTION STANDARD DESIGN The valve body is machined from solid round bar in stainless steel AISI
Process Filtration From Pure to Sterile
Process Filtration From Pure to Sterile MAIN FEATURES & BENEFITS: High dirt holding capacity at low differential pressure and high flow rate Regenerable by Back-flushing or ultrasonication For the filtration
Products of integrity from people of integrity. w w w. n e w m a n g a s k e t. c o m
Products of integrity from people of integrity. O -RINGS w w w. n e w m a n g a s k e t. c o m 1 How to size your O -Rings Newman Elastomer Characteristics If you don t know the size or number of the O
valvole unidirezionali one-way valves
La FOR rafforza la propria gamma prodotti con l introduzione delle valvole unidirezionali. Tali valvole permettono il libero passaggio in un solo senso (quello indicato dalla freccia) e lo impediscono
Mark 908 Series. Pressure Regulators Mark 908X Piloted Blanketing Regulators
Pressure Regulators Mark 908X Piloted Blanketing Regulators Mark 908 Series 3/4" - 1" (DN20 - DN25) Low Pressure Blanketing (Gas overlay) PRV for medium to large Stainless and SUD vessels The Mark 908
2 START PERKINS POMPE GRUPPO PUMPS GROUP ESEMPIO DI ORDINAZIONE IN CODICE /EXAMPLE OF ORDERING CODE 2SP PRKS - G. Pompe ad ingranaggi Gear pumps
POMPE GRUPPO PUMPS GROUP Pompe ad ingranaggi 2 START A= ESEMPIO DI ORDINAZIONE IN CODICE /EXAMPLE OF ORDERING CODE 2SP A 14 D (H) - 1 G (VT) CILINDRATA cm³/giro DISPLACEMENT c m ³ /rev. Flangia e coperchio
FLUSH MOUNTED TC CONNECTION. Function: blind cap. Design: Requirement:
TK CONNECTION FLUSH MOUNTED TC CONNECTION Syringe device on TK connection sampling valve on TK Connection Typ. installation Function: Hygienic device features a compact design that allow the installation
King Lai Hygienic Materials Co., Ltd. CDA/ Bulk Gas / UHP Gas Delivery System
King Lai Hygienic Materials Co., Ltd. CDA/ Bulk Gas / UHP Gas Delivery System Introduction 1 King Lai Standard and Specifications 2 Cleaning & Packaging Process Tube & Pipe 34 56 TUBE PIPE ASTM PIPE JIS
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
In-line diaphragm seal with sterile connection For sanitary applications Model , aseptic connection per DIN 11864
Diaphragm seals In-line diaphragm seal with sterile connection For sanitary applications Model 981.51, aseptic connection per DIN 11864 WIKA data sheet DS 98.51 Applications For direct, quickly removable
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications JSRLP is a high purity gas low pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. The JSRLP
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)
The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless
Rubber Fab Technologies Group s. Tuf-steel. world champion gaskets
Rubber Fab Technologies Group s Tuf-steel A FULL LINE of world champion gaskets Tuf-Steel is the true champion because Tuf-Steel goes the distance. Composed of a unique proprietary blend of non-pigmented
Process Filtration From Pure to Sterile
From Pure to Sterile MAIN FEATURES & BENEFITS: High dirt holding capacity at low differential pressure and high flow rate Highly durable stainless steel design Regenerable by ultrasonication or backflushing
Sez. R VILLA VALVOLE. TIPOLOGIE MODELS Pag. 2. Giunti AXILOCK AXILOCK type Pag. 3. Giunti AXIFLEX AXIFLEX type Pag. 5
Giunti di congiunzione Pipe couplings GIUNTI TEEKAY TEEKAY COUPLINGS TIPOLOGIE MODELS Pag. 2 Giunti AXILOCK AXILOCK type Pag. 3 Giunti AXILOCK Fire proof AXILOCK Fire proof Pag. 4 Giunti AXIFLEX AXIFLEX
T EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
REQUEST PUBLICATION 18.11
* SEE VICTALIC PBLICATION 10.01 FOR DETAILS The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining ½"/15, ¾"/
JSRLF Series. Low Flow Pressure Reducing Valves for Bio, Pharma and High Purity Gas Application
JSRLF Series Low Flow Pressure Reducing Valves for Bio, Pharma and High Purity Gas Application New Option! EPDM seat for low lockup and tight shutoff on no flow or deadhead blanketing applications The
Rps Available Body. Standard CLAMP 1/2" BS. Optional fil. gas m. 3/8"- 1/2" Optional CLAMP 1" BS RPS-05AJZCH-XX-31A
Standard CLAMP 1/2" BS Esecuzione H a faccia piana H execution flat face -05AGPAH-XX-31A Rps Available Body RPQ-05AGPBH-XX-31A Esecuzione T con tubo di sample T execution with sampling pipe -05AHZCT-XX-31A
PYPLOK System It s the weldless, threadless way to join pipe/tube
The Tube-Mac PYPLOK System It s the weldless, threadless way to join pipe/tube Leakfree performance, reduced installed cost and minimised downtime The Tube-Mac PYPLOK connecting system is sparkless and
Ultra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
HYGIENIC TUBE & PROCESS COMPONENTS DIN/ISO/METRIC
HYGIENIC TUBE & PROCESS COMPONENTS DIN/ISO/METRIC EN DIN (ISO/Metric) The most important norm range within Europe for industrial (non Food) applications consists of 2 dimension ranges. The ISO 1127 dimension
NEUMO ASEPTIC TECHNOLOGY
A member of NEUMO Ehrenberg Group NEUMO ASEPTIC TECHNOLOGY STAINLESS SOLUTIONS FOR LIFE CONTENTS About NEUMO... 00 Company Portrait... 00.01 ConnectS... 01 Introduction...01.01 Flange Connection...01.02
SVC/SHC Series. Sanitary Check Valves. NEW - SVC for vertical down process outflow and drain installations. Features
SVC/SHC Series Sanitary Check Valves NEW - SVC for vertical down process outflow and drain installations The patented SVC/SHC Series are vertical and horizontal check valves designed specifically for use
OIL & WATER VALVES DIAPHRAGM MOTOR VALVE DUCTILE IRON VALVES AVAILABLE: ITEM QTY. DESCRIPTION PART NO.
DIAPHRAGM MOTOR VALVE DUCTILE IRON * 1 2 4 3 5 6 * 15 * 15 14 * 30 29 28 31 16 1 18 13 1 * 19 20 21 8 9 * 10 * 11 12 * ITEM QTY. DESCRIPTION PART NO. 1 2 Gasket * 364 2 1 Stuffing Box Nut 345 3 1 Follower
"Send a signal not a technician" Mark 95AA and Mark 95AAFT upgrade kits available for currently istalled MK95 regula- tors Air Loading a MK95AA:
Mark 95 Series Sanitary ir ugmented Back Pressure Regulators The Mark 95 with air augmentation () option offers the same line sizes, Cv choices, seats, low build up characteristics, and stability of the
Advanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
GROPPALLI. Accessori per caldaie a condensazione Fittings for condensing boilers
GROPPALLI Accessori per caldaie a condensazione Fittings for condensing boilers KIT PROLUNGA EXTENSIONS GROPPALLI systems L evoluzione del mercato ha portato Groppalli a sviluppare una gamma completa di
Manual and Specialty Valves. Efficient Fluid Processing. ease and thoroughness of CIP incorporating new technology and innovation
Valves are important to any processing system. That s why many trust the experience and innovation of Alfa Laval. Manual and Specialty Valves Efficient Fluid Processing The key to efficient fluid processing
RACCORDI IN GHISA MALLEABILE MALLEABLE CAST IRON FITTINGS
RACCORDI IN GHISA MALLEABILE QUALITY APPLICAZIONE: Sanitario, riscaldamento ed impianti gas, raffreddamento ed aria condizionata, impianti antincendio ecc... APPLICATION: Sanitary, heating and gas installation,
Producer of High Purity Polymer Components. high purity solutions
Producer of High Purity Polymer Components high purity solutions POLYSOURCE Clamp and Gasket Assembly Gauge Guard TM ISOLATOR AMERIFLEX GASKETS TM Source Assemblies provide access to your pipeline through
Bioprocessing Equipment
ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment A N I N T E R N A T I O N A L S T A N D A R D ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment AN AMERICAN NATIONAL STANDARD
DIN /DIN Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002
/ Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002 / Aseptic Screwed Unions This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
A Full Line of Stainless Steel Flow Control Equipment for the Food, Beverage, and Dairy Processing Industries PUMPS VALVES FITTINGS TUBING CUSTOM FABRICATIONS www.toplineonline.com Fittings Top Line produces
Thermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 Applications Sanitary applications Food industry Beverage industry Bio and pharmaceutical industry,
Measure Table CONTENTS
Measure Table Measure Table CONTENTS Series 1000 Flat gasket dimensional table for flanges according to Standard EN 1514-1... 2-3 Flat gasket dimensional tables for flanges according to Standard ASME B16.21
Centrifugal Pumps. Distributed by: 7033 Telford Way #20, Mississauga, ON L5S 1V4 Tel: Toll Free:
Centrifugal Pumps Distributed by: 733 Telford Way #2, Mississauga, ON L5S 1V4 Tel: 95.677.9 Toll Free: 1.8.486.7863 www.tricanada.com Engineered For Lasting Performance Fristam is an international manufacturer
3A SANITARY WELDED PIPE-FITTINGS
- SNITY FITTINS 3 SNITY WEE PIPE-FITTINS W1001 W1002 W1003 W1004 W1005-1 3 1 45 - Short type ong type Short type ong type 3 Welded Elbow (90 ) 1 1/2" 12.7 19.1 38 19.1 3/4" 19.1 28.5 38 28.5 1" 25.4 38.1
FAX: SPECIAL APPLICATION HOSES, METAL & TEFLON HOSES
Large Bore Teflon Fittings Selection Pipe Thread (NPT) Style 03 Flanges Lap Joint Flange Style 12 Shown with epoxy coated steel flange Cam and Groove Female Swivel Type Style 16 Also available Teflon Encapsulated
PTFE Lined Pipe and Fittings
Allied Supreme Corp. - 1 - PTFE Lined Pipe and Fittings Allied Supreme Corp. - 2 - Index Specification For PTFE Lined Pipe and Fittings..3 PTFE Lined Pipe 7 PTFE Lined 90 Elbow. 8 PTFE Lined 45 Elbow.9
Mark 9020 Series. Sanitary Ball Valves. CRN Registration Number Available. condensate drain. See pages 9 & 10. New: Optional Integral bottom
Mark 9020 Series Sanitary Ball Valves CRN Registration Number Available New: Optional ntegral bottom condensate drain. See pages 9 & 10 The Mark 9020 Series ball valves take ASME BPE guidelines to heart.
Radial Diaphragm Valve
www.swagelok.com Radial Diaphragm DR Series 36L stainless steel and modified PTFE wetted parts Variety of compact multivalve, multiport configurations Choice of sanitary clamp and butt weld end connections