Flamco Ceiling, Wall and Floor Clips

Transcription

1 C E I L I N G, W A L L A N D F L O O R C L I P S 1 Flamco Ceiling, Wall and Floor Clips BSA BSF-D BK BMA KB Edition 2007 / EXP

2 Ceiling, Wall and Floor Clips Click here for the Flamco BS clip which fits e Flamco offers you a wide range of BS clips for all types. That applies to the range of clips from 12 mm to 16 plus the countless connection options from M 8 - M 12, combinut, and 1 /2. It also applies in relation to the various types of rubber for special applications. BSA Flamco R rail and accessories: pages FSS ClickFit: page 6.4. RD rail end caps: page 6.2. D threaded rods: page 8.7. Rigid or flexible clips: pages The advantages of Flamco BSA clips: Patented locking system ensures rapid assembly. Minimal headroom requirement permits pipes to be installed directly under the ceiling. Stout clip material ensures both stability and rigidity. Rubber inlay with four air chambers for substantial noise reduction (19 db(a). Rubber inlay clamped to the clip. Should the pipe move in any way, the rubber will not be displaced: it will remain firm at all times. High temperature resistance of the rubber: from - 40 C to C. The mounting nut has a combined groove /cross-head. The click-in spring for easy pre-assembly without the need for tools and without the pipe coming away from the clip. BSA clips are available with a large of different connections. Flamco BS clips have a universal fitting. It is possible to mount these clips both vertically and horizontally. Table with types and technical information: page See also the BSL-A (page 7.3) and the BRS-A (page 9.3). 1.2

3 very type Ceiling, Wall and Floor Clips BSA-S BSA-N BSA-G CLICKIN BSA Extra BSA-S feature: Fitted with special heat resistant rubber: resistant from 60 C to C. Extra BSA-N feature: Fitted with flame retardant rubber which does not drip or melt, guaranteeing a long and safe service life. Extra BSA-G feature: Fitted with smooth rubber for attaching around plastic pipe. Spacer in the click-in spring lock prevents over-tightening of the clip. Extra ClickIn BSA features: Part of the Flamco Smart System: page 5.5. No more de-burring of the threaded rod. Insert threaded end in nut; do not screw. Twist the clip to the correct position. Fitted in no time! Patented system. RWA-G BSI BSH BSB RWA-G, RWB-G and RWC-G Clips fitted with noisereducing EPDM rubber insert. RWA-G clips complete with screws and nuts. RWB-G and RWC-G clips fitted with six-sided bolts with saw slot. RWC-G clips with M 10 connection. Flamco BSI Fitted with noise suppressing rubber lining. Reinforcing grooves maintain lining shape. Fitted with combination M 8 / M 10 connection. Suitable for installations with restricted space; bolt features screw-cross-head. Fitted with two bolts with antiloss ring. Flamco BSH Fitted with noise suppressing rubber lining. Reinforcing grooves maintain lining shape. Fitted with combination M 8 / M 10 connection. Suitable for installations with restricted space; bolt features screw-cross-head. Quick-locking system. Flamco BSB One-piece clip with noise suppressing rubber lining. Fitted with M 8 thread connection. Available in diameters from 1 /8 to 2 Quick-locking system. Suitable for installations with restricted space; bolt features screw-cross-head. 1.3

4 Ceiling, Wall and Floor Clips BS clips without rubber lining and other types On these pages we show you a of other mounting options. First of all, the BSF and BSU clips for universal fitting. The BSF and BSF-D clips are characterised by a wide range of sizes from 3 /8 to 16 in combination with a possibility of very close-fitting sizes. The BSU clip, with its range from 1 /2 to 6 similarly offers close-fitting versions. Flamco R rail and accessories: pages RD rail end caps: page 6.2. BSF-D Locknut: page 6.3. rods: page 8.7. Washers: page 6.3. BSF clip for universal mounting. BSF Flamco offers the best clip ideal fixing for every requirement. Table with types and technical information: page See also the BSG (page 4.2), BRS (page 9.3) and BSL clips (page 7.2). The advantages of Flamco BSF clips: For horizontal mounting to the wall or for vertical mounting beneath the ceiling. Suitable for confined spaces. Suitable for heavy loads and high temperatures. BSF clips in M 10, M 12, M 16 and 1 /2 versions, fitted with anti-loss ring. Range from 3 /8 to

5 of clips for numerous fixing options Ceiling, Wall and Floor Clips BSU BSP KB VARIOFIT KS Flamco BSU For horizontal mounting to the wall or for vertical mounting beneath the ceiling. Reinforcing grooves maintain lining shape. Fitted with either combination M 8 / M 10 or M 10 / M 12 connection. Suitable for installations with restricted space; bolt features screwcross-head. BSP fixed point clips Suitable for fixed-point constructions such as in combination with the VH connecting corners (page 6.5 and 6.10) or the VG angular plate (page 8.3 and 8.9). Suitable for very high loads. With extra long lugs for fixing. KB clips Suitable for fixed point constructions. Suitable for very high loads. According to DIN Specially intended for mounting heavy pipes e.g. rising mains. Variofit plastic clips For mounting copper or thin-walled steel pipes. Can be used with Flamco rail R1, R 2, R 3 and R 4. Hinged click connections and equal centre to wall distances for the Variofit and Fitted with brass mounting nut, c. 5 mm adjustable. KS clips For horizontal or vertical fitting of copper pipes. Single and double versions. Fast mounting. High-quality polypropylene material provides excellent noise damping. Available in white or chrome-finish. BSF-D PC RWA OMEGA UB Extra BSF-D feature: The BSF-D has an additional lower nut to permit further clips to be installed beneath, (subject to overall design loads). PC plug clip For use with floorheating and plastic pipes. For simple mounting on the floor. RWA, RWB and RWC clips RWA clips complete with screws and nuts. RWB and RWC clips fitted with six-sided bolts with saw slot. RWC clips with M 10 connection. Omega clips Basic version, particularly suitable for flush fitting to walls. Fast and easy fitting. UB clips Heavy-duty clip for mounting steel pipes directly to Flamco rail or other surfaces. connection from M 6 to M 16. Supplied complete with 4 nuts. 1.5

6 Ceiling, Wall and Floor Clips Flamco All BK series pipe hangers are quickly and eas And that s not all! See what other benefits the BK series offers! The advantages of the Flamco BK clip series: The one-piece clip can withstand a very high load. The integral ball and socket design compensates for any movement or expansion in the pipe. Up to 12º of movement. The length of the sleeve permits insulation of the pipe without restriction to the ball joint. Ball hanger: page rod: page 8.7. Cap for sealing the ball joint: page 1.7. Rail end cap for a neat finish: page 6.2. Flamco rail in black or galvanised: page FSS ClickEasy: page 5.5. Assembly without any tools 1. Manually open the clip and place it around the pipe. 2. Close the clip around the pipe and the ball joint. BKI clip with rubber lining: page Now slide the sleeve downwards and... Ready! BO / BOK connectors for mounting BK clips beneath one another: page 1.7. Support half: page 8.6. The ball joint offers movement of maximum 2 x 6 and thus makes an additional ball hanger on the clip unnecessary. It also requires none, or fewer, fixed points. Table with types and technical information: page See also the support half ST (page 8.6). 1.6

7 ily fitted without tools Ceiling, Wall and Floor Clips BK BKI BKK BKP BKR Additional characteristics of BK: For mounting threaded pipe, sprinkler pipe and thin-walled steel pipe. Sendzimir clip (BK 12 electrolytically zinc-plated). Additional characteristics of BKI: Supplied with a noise suppressing rubber lining. For pipe sizes greater than mm, a BK clip can be used with a separate rubber lining strip SR. Sendzimir clip (BK 12 electrolytically zinc-plated). Additional characteristics of BKK: For mounting copper pipe work. Clip copper. Sleeve and ball joint electrolytically zinc-plated. Additional characteristics of BKP: For mounting plastic pipe work. Sendzimir clip. Additional characteristics of BKR: For mounting castiron sewage piping. Clip up to 8 x 125 sendzimir, larger sizes electrolytically zinc-plated. From BKR 8 x 150 with a clamp on the inside of the sleeve. EB SOCKET T BO / BOK BSC LB SR T Cap Water and dust tight sealing of the ball joint which guarantees freedom of movement. Holds the sleeve firmly allowing both hands to be free for assembling. Connector BO / BOK For mounting certain BK seriesclips beneath one another whilst maintaining the flexibility of the suspension. BSC clips Suitable for mounting to the ceiling and to (rail) constructions. The one-piece clip can withstand a very high load. Mounting with EB 25 or EB 18. Mounting tape LB The plastic covering is stuck to the steel core, so that it cannot slide. Simply cut to the right length. High mechanical tension and can be fitted easily and quickly. Noise suppression strips SR Noise suppressing lining for clips. When the SR strip is used the associated clip chosen must be larger than the outside diameter of the pipe to be fitted. 1.7

8 Ceiling, Wall and Floor Clips BM and DP clips give you a perfect mounting Flamco BM clips are made up of three parts, namely the one-piece clip, the sleeve, and a nut. The sleeve has three characteristics. The leading edge is fl ared to permit easy location. The trailing edge is domed and acts as a travel stop for the nut. Finally, its overall conical shape ensure secure fi xture. Thanks to these technical features, BM clips are very easy to mount correctly. The advantages of Flamco BM clips: The one-piece clip can withstand a very high load. wood screw with torx connection so that these can be screwed with a hand drill. The clip covers the screws so that they are hidden from sight. Perfect finish and rigid mounting. Allows the pipe to expand. DP double pipe clips. Version hk with short wood screw and plastic plug. This is how easy it is to mount the Flamco BM clip 1 Fit wood screw. 2 Open clip and bend it round the pipe. 3 Push on sleeve. 4 Tighten nut and... Ready! 1 BMA clip with rubber lining. Flamco rail in black or galvanised: page BM wall clips are available in three versions Without wood screw. To connect to rail with hammer head bolt set, threaded tube, or an insert pin. Execution su BMK clip for copper pipes. With short wood screw and plastic plug. Execution hk Hammer head bolt set: page 6.3. Fitted with a long wood screw and plastic plus. Execution hl Table with types and technical information: page See also clips for rain drainage (page ). 1.8

9 and a smooth finish RWK Ceiling, Wall and Floor Clips BM BMA BMK RWS Additional characteristics of BM: For mounting threaded pipe, sprinkler pipe and thin-walled steel pipe. Clip sendzimir, other parts electrolytically zinc-plated. Additional characteristics of BMA: Supplied with a noise suppressing rubber lining. For mounting threaded pipe, sprinkler pipe, thin-walled steel and copper pipe Additional characteristics of BMK: For mounting copper pipe work. Clip sendzimir, other parts electrolytically zinc-plated. RWK, RWK-G and RWS clips Particularly suitable for visible wall mounting with wire tack (diameter 8 mm). RWK-G fitted with noisereducing EPDM rubber insert for temperatures from 40 C to C. With six-sided nut with saw slot for quick and easy fitting. RWS with two six-sided nuts with saw slot. DP WITH LINING DP SINGLE DP DOUBLE PIPE SUPPORT DP double pipe clips with lining For mounting (thin-walled) steel pipes. Fitted with a sound suppressing grey neoprene lining that is glued in the clip. Adjustable depth, fixed pipe centres. DP single pipe clip For mounting (thin-walled) steel pipes. Adjustable depth. Loosening or tightening the bolt is possible with spanner or screwdriver. DP double pipe clips For mounting (thin-walled) steel pipes. Adjustable depth, fixed pipe centres. Supplied with a reinforced backplate with a slot of 18 x 8 mm. Angle support DP double pipe clips can be mounted from the floor at three different centres. Slots 30 x 6.5 mm for mounting the DP double pipe clip. Slots 20 x 8.5 mm for mounting to the floor. 1.9

10 Ceiling, Wall and Floor Clips Flamco BSA clips for all types s and Flamco BSA-S clips with temperature resistant rubber Fast assembly thanks to the patented locking system with click-spring. Easy pre-assembly without the need for tools and without the pipe coming away from the clip. Minimal headroom requirement making it possible to mount pipes directly to the ceiling. Stout material ensures stability and rigidity. BSA-S fitted with special heat resistant rubber: resistant from 60 C to C. s and BSA clips Ext. from - to tube s and BSA-S clips connection working load working load* 19 db(a) in inches M 8 M 10 M 8/10 M 12 M 16 1 /2 / M 10 in N in N M 8 M 10 M 8/10 M 12 M 16 1 /2 M 10 BSA /4 M 8 - M 8/ /2 / M x BSA M 8 - M 8/ /2 / M x BSA /8 M 8 - M 8/10 M 12-1 /2 / M x BSA /2 M 8 - M 8/10 M 12-1 /2 / M x BSA /4 M 8 - M 8/10 M 12-1 /2 / M x BSA M 8 - M 8/ /2 / M x BSA M 8 - M 8/10 M 12-1 /2 / M x BSA /4 M 8 - M 8/10 M 12-1 /2 / M x BSA /2 M 8 - M 8/10 M 12-1 /2 / M x BSA M 8 - M 8/10 M /2 / M x BSA M 8 - M 8/10 M 12-1 /2 / M x BSA M 8 - M 8/10 M /2 / M x BSA M 8 - M 8/10 M 12-1 /2 / M x BSA /2 M 8 - M 8/10 M 12-1 /2 / M x BSA M 8 - M 8/10 M /2 / M x BSA M 8 - M 8/10 M 12-1 /2 / M x BSA /2 M 8 - M 8/10 M /2 / M x BSA M 8 M 10 M 8/10 M 12-1 /2 / M x BSA M 10 M 8/10 M /2 / M x BSA M 10 M 8/10 M 12-1 /2 / M x BSA M 10 M 8/10 M 12-1 /2 / M x BSA M 10 M 8/10 M 12-1 /2 / M x BSA M x BSA M x BSA M x BSA M x BSA M x * To achieve good sound suppression do not overload the fitting. Ext. from - to tube connection working load working load* 19 db(a) in inches in N in N BSA-S /4 M x BSA-S M x BSA-S /8 M x BSA-S /2 M x BSA-S /4 M x BSA-S M x BSA-S M x BSA-S /4 M x BSA-S /2 M x BSA-S M x BSA-S M x BSA-S M x BSA-S M x BSA-S /2 M x BSA-S M x BSA-S M x BSA-S /2 M x BSA-S M x BSA-S M x BSA-S M x BSA-S M x BSA-S M x * To achieve good sound suppression do not overload the fitting. BSA/BSA-S 12-13, BSA/BSA-S

11 Flamco BSA-N clips with flame retardant rubber (neoprene) and BSA-G clips with smooth rubber for plastic pipes BSA-N clips are fitted with flame retardant rubber which does not drip or melt, ensuring a long and safe service life. Fitted with smooth rubber for attaching around a plastic pipe. Spacer in the click-in spring lock prevents over-tightening of the BSA-G clip. Ceiling, Wall and Floor Clips s and BSA-N clips Ext. dia from - to tube connection working load working load* 19 db(a) in inches in N in N BSA-N /4 M x BSA-N M x BSA-N /8 M x BSA-N /2 M x BSA-N /4 M x BSA-N M x BSA-N M x BSA-N /4 M x BSA-N /2 M x BSA-N M x BSA-N M x BSA-N M x BSA-N M x BSA-N /2 M x BSA-N M x BSA-N M x BSA-N /2 M x BSA-N M x BSA-N M x BSA-N M x BSA-N M x BSA-N M x * To achieve good sound suppression do not overload the fitting! s and BSA-G clips Pipe size connection working load in N BSA-G M x BSA-G M x BSA-G M x BSA-G M x BSA-G M x BSA-G M x BSA-G M x BSA-G M x BSA-G M x BSA-G M x BSA-G M x BSA-G M x BSA-G M x BSA-N BSA-G 1.11

12 Ceiling, Wall and Floor Clips Selection table for BSA, BSA-S and BSA-N clips Using the table below, you can easily find the right type of BSA, BSA-S, or BSA-N clip for the type and dimension s you require. Selection table for BSA, BSA-S and BSA-N clips tube DIN 2240/ 2441 nom. in inches Fire tube DIN 2448/ /2461 nom. Copper pipe DIN 1786 nom. ML pipe SML pipe DIN nom. LORO X / / / / / / / /

13 Selection table for BSA, BSA-S and BSA-N clips Using the table below you can easily find the right type of BSA, BSA-S, or BSA-N clip for the type and dimension s you require. Ceiling, Wall and Floor Clips Selection table for BSA, BSA-S and BSA-N clips PVC pipe PE pipe Geberit wall thickness Wicu Special copper pipe wall thickness Wicu Extra copper pipe Thin-walled steel pipe DIN 2391 ext. dia Vulcathene x x x x x x x x x x x x x x x x x x x x x

14 Ceiling, Wall and Floor Clips Flamco BSB clips with quick locking system The BSB clip is a single-part clip with noise suppressing rubber inlay. Suitable for confined spaces; bolt features screw-cross-head. Fitted with quick-locking system. s and BSA clips Ext. from - to connection working load working load ** 16 db(a) in N in N BSB 8 x 1 / M x BSB 8 x 1 / M x BSB 8 x M x BSB 8 x 3 / M x BSB 8 x 1 / M x BSB 8 x 3 / M x BSB 8 x M x BSB 8 x 1 1 / M x BSB 8 x 1 1 / M x BSB 8 x M x BSB 8 x M x * To achieve good sound suppression do not overload the fitting. BSB s and BSB clips tube DIN 2440/2441 nom. in inches nom. Fire tube DIN 2448/ /2461 Copper pipe DIN 1786 wall thickness Wicu Special copper pipe Thin-walled steel pipe DIN 2391 BSB 8 x 1 / / BSB 8 x 1 / / x BSB 8 x x x BSB 8 x 3 / / x BSB 8 x 1 / / x BSB 8 x 3 / / x BSB 8 x BSB 8 x 1 1 / / BSB 8 x 1 1 / / x BSB 8 x BSB 8 x x

15 Flamco BSH clips with quick-locking system and BSI clips with anti-loss ring BSH and BSI clips are both fitted with a sound suppressing rubber lining. Reinforcement grooves ensure that BSH and BSI clips maintain their shape. BSH and BSI clips are ideal for confined spaces; fixing bolt features screw-cross-head. BSI clips fitted with two bolts with anti-loss ring. BSH clips fitted with quick-locking system. Ceiling, Wall and Floor Clips s and BSH clips s and BSI clips Ext. from - to Ext. from - to tube tube connection connection working load working load working load* 15 db(a) working load* 16 db(a) in inches M 8/10 in N in N M 8/10 BSH /4 M 8/ x BSH /8 M 8/ x BSH /2 M 8/ x BSH M 8/ x BSH /8 M 8/ x BSH M 8/ x BSH M 8/ x BSH /4 M 8/ x BSH /2 M 8/ x BSH M 8/ x BSH M 8/ x BSH M 8/ x BSH /2 M 8/ x BSH M 8/ x BSH M 8/ x BSH M 8/ x BSH M 8/ x BSH M 8/ x * To achieve good sound suppression do not overload the fitting. in inches M 8/10 M 10/12 N N M 8/10 M 10/12 BSI M 8/ x BSI /4 M 8/ x BSI /8 M 8/ x BSI /2 M 8/ x BSI /4 M 8/ x BSI M 8/ x BSI /4 M 8/ x BSI /2 M 8/ x BSI M 8/ x BSI M 8/ x BSI M 8/ x BSI M 8/ x BSI /2 M 8/ x BSI M 8/ x BSI M 8/ x BSI M 8/10 M 10/ x BSI M 8/ x BSI M 8/10 M 10/ x BSI M 8/10 M 10/ x BSI M 8/10 M 10/ x BSI M 8/ x BSI M 8/ x BSI M 8/ x * To achieve good sound suppression do not overload the fitting. BSH BSI 1.15

16 Ceiling, Wall and Floor Clips RWA-G, RWB-G and RWC-G clips Clips fitted with noise-reducing EPDM rubber insert for temperatures from 40 C to C. Suitable for all types. RWA-G clips complete with screws and nuts. RWB-G and RWC-G clips fitted with six-sided bolts with saw slot. RWC-G clips with M 10 connection. Particularly suitable for threaded rod / wire tack M 10 for fitting to wall, ceiling and rail. RWA-G, RWB-G and RWC-G clips are electrolytically-galvanized. s and RWA-G clips s and RWB-G clips s and RWC-G clips Ext. tube connection working load in inches in N Ext. tube connection working load in inches in N Ext. tube connection working load in inches in N RWA-G 3 / /8 G 3 / x RWA-G 1 / /2 G 3 / x RWA-G 3 / /4 G 3 / x RWA-G G 3 / x RWA-G 1 1 / /4 G 1 / x RWA-G 1 1 / /2 G 1 / x RWA-G G 1 / x RWA-G 2 1 / /2 G 1 / x RWA-G G 3 / x RWA-G G 3 / x RWB-G 3 / /8 G 3 / x RWB-G 1 / /2 G 3 / x RWB-G 3 / /4 G 3 / x RWB-G G 3 / x RWB-G 1 1 / /4 G 1 / x RWB-G 1 1 / /2 G 1 / x RWB-G G 1 / x RWB-G 2 1 / /2 G 1 / x RWB-G G 1 / x RWB-G G 1 / x RWC-G 3 / /8 M x RWC-G 1 / /2 M x RWC-G 3 / /4 M x RWC-G M x RWC-G 1 1 / /4 M x RWC-G 1 1 / /2 M x RWC-G M x RWC-G 2 1 / /2 M x RWC-G M x RWC-G M x RWA-G RWB-G RWC-G 1.16

17 RWA, RWB and RWC clips RWA clips complete with screws and nuts. RWB and RWC clips fitted with six-sided bolts with saw slot. RWC clips with M 10 connection. Particularly suitable for threaded rod / wire tack M 10 for fitting to wall, ceiling and rail. Suitable for steel pipe. RWA, RWB and RWC clips are electrolytically-galvanized. Ceiling, Wall and Floor Clips s and RWA clips s and RWB clips s and RWC clips Ext. tube connection working load in inches in N Ext. tube connection working load in inches in N Ext. tube connection working load in inches in N RWA 3 / /8 G 3 / x RWA 1 / /2 G 3 / x RWA 3 / /4 G 3 / x RWA G 3 / x RWA 1 1 / /4 G 3 / x RWA 1 1 / /2 G 3 / x RWA 1 1 / /2 G 1 / x 3 on demand RWA G 1 / x RWA 2 1 / /2 G 1 / x RWA G 3 / x RWB 3 /8 17,2 3 /8 G 3 / x RWB 1 /2 21,3 1 /2 G 3 / x RWB 3 /4 26,9 3 /4 G 3 / x RWB 1 33,7 1 G 3 / x RWB 1 1 /4 42,4 1 1 /4 G 3 / x RWB 1 1 /2 48,3 1 1 /2 G 3 / x RWB 2 60,3 2 G 1 / x RWB 2 1 /2 76,1 2 1 /2 G 1 / x RWB 3 88,9 3 G 3 / x RWB 4 114,3 4 G 3 / x RWC 3 /8 17,2 3 /8 M x RWC 1 /2 21,3 1 /2 M x RWC 3 /4 26,9 3 /4 M x RWC 1 33,7 1 M x RWC 1 1 /4 42,4 1 1 /4 M x RWC 1 1 /2 48,3 1 1 /2 M x RWC 2 60,3 2 M x RWC 2 1 /2 76,1 2 1 /2 M x RWC 3 88,9 3 M x RWC 4 114,3 4 M x RWA RWB RWC 1.17

18 Ceiling, Wall and Floor Clips BSU and BSF clips for (thin-walled) steel pipes and plastic pipes BSU and BSF clips for horizontal mounting to the wall or vertical mounting to the ceiling. BSU and BSF clips are electrolytically zinc-plated. BSU and BSF clips are suitable for high loads and high temperatures. BSU and BSF clips are ideal for confined locations. BSF clips in connection sizes M 10, M 12, M 16 and 1 2 versions, fitted with anti-loss ring. s and BSU clips Ext. from - to tube connection working load in inches in N (v=3) BSU /2 M 8/ x BSU /4 M 8/ x BSU M 8/ x BSU /4 M 8/ x BSU /2 M 8/ x BSU M 8/ x BSU /2 M 8/ x BSU M 8/ x BSU M 10/ x BSU M 10/ x BSU M 10/ x BSU s and Flamco BSF clips Ext. from - to tube connection working load in inches M 8 M 10 M 12 M 16 1 /2 / M 10 in N (v=3) M 8 M 10 M 12 M 16 1 /2 / M 10 BSF /8 M 8 M /2 / M x BSF /2 M 8 M /2 / M x BSF /4 M 8 M /2 / M x BSF M 8 M /2 / M x BSF /4 M 8 M /2 / M x BSF /2 M 8 M /2 / M x BSF M 8 M /2 / M x BSF M 8 M /2 / M x BSF /2 M 8 M /2 / M x BSF M 8 M /2 / M x BSF M 8 M /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M 8 M 10 M 12-1 /2 / M x BSF M x BSF M x BSF M x BSF M x BSF 1.18

19 BSF-D clips for (thin-walled) steel pipes and plastic pipes BSF-D clips for fitting to the ceiling. The BSF-D has an additional lower nut to permit further clips to be installed beneath, (subject to overall design loads). BSF-D clips are electrolytically zinc-plated. BSF-D clips are suitable for high loads and high temperatures. BSF-D clips are ideal for confined locations. Ceiling, Wall and Floor Clips s and Flamco BSF-D clips Ext. tube connection working load from - to in inches D in N (v=3) BSF-D /8 M x BSF-D /2 M x BSF-D /4 M x BSF-D M x BSF-D /4 M x BSF-D /2 M x BSF-D M x BSF-D M x BSF-D /2 M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x BSF-D M x * The load applies for all the BSF-D Clips fitted under each other. BSF-D 1.19

20 Ceiling, Wall and Floor Clips Selection table for BSF and BSF-D clips Using the table below, you can easily find the right type of BSF or BSF-D clip for the type and dimension s you require. Selection table for BSF and BSF-D clips tube DIN 2440/ /2461 nom. in inches Sprinkler pipe DIN 2448/2458 DIN nom. nom. ML pipe SML pipe nom. LORO X PVC pipe / / / / / /

21 Selection table for BSF and BSF-D clips Using the table below, you can easily find the right type of BSF or BSF-D clip for the type and dimension s you require. Ceiling, Wall and Floor Clips Selection table for BSF and BSF-D clips PE pipe Geberit wall thickness Wicu Special copper pipe wall thickness Wicu Extra copper pipe Thin-walled steel pipe DIN 2391 Vulcathene x x x x x x x x x x x x x x

22 Ceiling, Wall and Floor Clips BSP fixed point clips BSP clips for fixed point constructions, for example in combination with VH corner connections (see page 6.5 and 6.10) or VG angular plate (see page 8.3 and 8.9) and for very high loads. BSP clips are electrolytically zinc-plated and offer extra long lugs for mounting. BSP clips are supplied as complete clip. i.e. with two halves. s and Flamco BSP clips Ext. tube nom. Suitable for Tightening moment of bolt/nut axial load on clip in inches in N bolt backnut in Nm in N BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP x M BSP 1.22

23 KB clips KB clips for fixed point constructions and very high loads. Heavy-duty type according to DIN KB clips are delivered per half i.e. for one half of the clip. Ceiling, Wall and Floor Clips s and Flamco KB clips Ext. tube nom. Sprinkler pipe nom. Dimensions Bolts required in inches A C D F R mm steel zinc-plated KB x 5.0 M 10 x KB x 5.0 M 10 x KB / x 5.0 M 10 x KB x 5.0 M 10 x KB x 5.0 M 10 x KB x 5.0 M 10 x KB / x 5.0 M 10 x KB x 5.0 M 10 x KB / x 5.0 M 10 x KB x 6.0 M 12 x KB x 6.0 M 12 x KB / x 6.0 M 12 x KB x 6.0 M 12 x KB x 8.0 M 16 x KB x 8.0 M 16 x KB x 8.0 M 16 x KB x 8.0 M 16 x KB x 8.0 M 16 x KB x 8.0 M 16 x KB x 8.0 M 16 x KB x 8.0 M 16 x KB x 8.0 M 20 x KB x 8.0 M 20 x KB x 8.0 M 20 x KB x 8.0 M 20 x KB x 8.0 M 20 x KB x 10.0 M 24 x KB x 10.0 M 24 x KB x 10.0 M 24 x KB x 10.0 M 24 x KB x 10.0 M 24 x KB 1.23

24 Ceiling, Wall and Floor Clips Variofit plastic clips, PC plug clips, and KS clips Variofit clips are suitable for copper or thin-walled steel pipes or use in the Flamco rail R1, R 2, R 3 and R 4. Variofit clips manufactured from nylon plastic with brass fixing nut. Variofit clips can be secured using M 6 rod or wood screws with a maximum head of 7 mm. PC plug clips for use with floor heating and plastic pipes for mounting on the floor. Manufactured from nylon plastic. Drilled hole 6 mm, drilled depth 30 mm. KS clips with brass nut with M 6 connection. KS clips are resistant to temperatures from 30 C to C. KS clips in single (KS), double (KSD) and chrome (KSC and KSDC). s and Flamco Variofit clips Ext. Minimum pull-out force Centre distance connection open N closed N to the wall Variofit M Variofit M Variofit M Variofit M VARIOFIT s and Flamco PC plug clips Ext. Distance between centres PC single PC single PC single PC double PC double PC s and Flamco KS clips Ext. Ext. Dimensions connection A H KS M KS M KS M KS M KS M KS M KS M KS M KS M KS M KS KSD KSC 10 2 x 10 6 M KSC 12 2 x 12 8 M KSC 15 2 x M KSD M KSD x 6 M KSD x 8 M KSD x 10 M KSD x 12 M KSD x 15 M KSD x 22 M KSDC 10 2 x 10 2 x 6 M KSDC 12 2 x 12 2 x 8 M KSDC 15 2 x 15 2 x 10 M

25 UB and Omega clips UB: heavy-duty clip for mounting steel pipes directly to Flamco rail or other surfaces. connection from M 6 to M 16. Supplied complete with 4 nuts. Omega: basic version, particularly suitable for flush fitting to walls. Fast and easy fitting. UB and Omega clip electrolytically-galvanized. Ceiling, Wall and Floor Clips s and UB clips Ext. connection Dimensions Suitable for Flamco rail from - to tube threaded end in inches A B UB 6 x M R 1 / R 2 / R UB 6 x M R 1 / R 2 / R UB 6 x M R 1 / R 2 / R UB 8 x M R 0 / R 1 / R 2 / R UB 8 x M R 0 / R 1 / R 2 / R UB 8 x M R 0 / R 1 / R 2 / R UB 8 x M R 0 / R 1 / R 2 / R UB 8 x M R 1 / R 2 / R UB 8 x M R 1 / R 2 / R UB 8 x M R 0 / R 1 / R 2 / R UB 10 x M R 1 / R 2 / R UB 10 x M R 1 / R 2 / R UB 10 x M R 1 / R 2 / R UB 10 x M R 1 / R 2 / R UB 12 x M R 4 / R 7 / R UB 12 x M R 4 / R 7 / R UB 12 x M R 4 / R 7 / R UB 12 x M UB 12 x M R 4 / R 7 / R UB 12 x M R 4 / R 7 / R UB 16 x M UB 16 x M UB 16 x M UB 16 x M s and Omega clips Ext. tube mm Omega 1 / x Omega 3 / x Omega 1 / x Omega 3 / x Omega x Omega 1 1 / x Omega 1 1 / x Omega x UB OMEGA 1.25

26 Ceiling, Wall and Floor Clips Flamco BK clips for steel pipes Sleeve and ball joint electrolytically zinc-plated. Provision for additional clips to be installed beneath using the BO connector (subject to overall design loads) whilst maintaining flexibility*. s and Flamco BK clips tube nom. Sprinkler Pipe Thin-w. steel pipe connection working load A Cap in inches in N BK 6 x 15* M x T BK 6 x 18* M x T BK 6 x M x T BK 6 x M x T BK 6 x M x T BK 6 x M x T BK 6 x 3 /8 3 /8 - - M x T BK 6 x 1 /2 1 /2 - - M x T BK 6 x 3 /4 3 /4 - - M x T BK 6 x M x T BK 6 x 1 1 /4 1 1 /4 - - M x T BK 6 x 1 1 /2 1 1 /2 - - M x T BK 6 x M x T BK BK 6 x M x T BK 6 x M x T BK 6 x M x T BK 6 x M x T BK 6 x M x T BK 6 x M x T BK 6 x M x T BK 6 x M x T * Except BK 6 x 15 and BK 6 x

27 Flamco BK clips for steel pipes Sleeve and ball joint electrolytically zinc-plated. Provision for additional clips to be installed beneath using the BO connector (subject to overall design loads) whilst maintaining flexibility*. BK clips with a connection size of M 12 have a lock on the inside of the sleeve. Ceiling, Wall and Floor Clips s and Flamco BK clips tube nom. Sprinkler pipe Thin-w. steel pipe connection working load A Cap ext. dia in inches in N BK 8 x 15* M x T 8S BK 8 x 18* M x T 8S BK 8 x M x T 8S BK 8 x M x T 8S BK 8 x M x T 8S BK 8 x M x T 8S BK 8 x 3 /8 3 /8 - - M x T 8S BK 8 x 1 /2 1 /2 - - M x T 8S BK 8 x 3 /4 3 /4 - - M x T 8S BK 8 x M x T 8S BK 8 x 1 1 /4 1 1 /4 - - M x T 8S BK 8 x 1 1 /2 1 1 /2 - - M x T 8S BK 8 x M x T 8S BK BK 8 x M x T 8S BK 8 x M x T 8S BK 8 x M x T 8S BK 8 x M x T 8S BK 8 x M x T BK 8 x / M x T BK 8 x M x T BK 8 x M x T BK 8 x M x T BK 8 x M x T BK 8 x M x T BK 8 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T BK 12 x M x T * Except BK 8 x 15 and BK 8 x

28 Ceiling, Wall and Floor Clips Flamco BKI clips with noise suppressing rubber lining Sleeve and ball joint electrolytically zinc-plated. Provision for additional clips to be installed beneath using the BO connector (subject to overall design loads) whilst maintaining flexibility*. BKI clips with a connection size of M 12 have a lock on the inside of the sleeve. s and Flamco BKI clips tube Fire tube Thin-w. steel pipe Copper pipe connection working load working load A nom. dia 20 db(a) in inches in N in N** BKI 6 x 12* M x BKI 6 x 15* M x BKI 6 x 18* M x BKI 6 x M x BKI 6 x M x BKI 6 x M x BKI 6 x M x BKI 6 x M x BKI 6 x 3 /8 3 / M x BKI 6 x 1 /2 1 / M x BKI 6 x 3 /4 3 / M x BKI 6 x M x BKI 6 x 1 1 /4 1 1 / M x BKI 6 x 1 1 /2 1 1 / M x BKI 6 x M x BKI BKI 6 x M x BKI 6 x M x BKI 6 x M x BKI 6 x M x BKI 8 x M x BKI 8 x / M x BKI 8 x M x BKI 8 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x BKI 12 x M x * Except BKI 6 x 15 and BKI 6 x 18. ** To achieve good sound suppression do not overload the fitting. 1.28

29 BKK clips for copper pipe and BKP clips for plastic pipes BKK and BKP clips: sleeve and ball joint electrolytically zinc-plated. Provision for additional clips to be installed beneath using the BO/BOK connector (subject to overall design loads) whilst maintaining flexibility*. Ceiling, Wall and Floor Clips s and of sound suppressing strips SR Clip Ø internal with lining s and Flamco BKK clips Length of the rubber strip in cm per clip Pipe size working A connection load in N of rubber strip BK 12 x SR 3 BK 12 x SR 3 BK 12 x SR 3 BK 12 x SR 3 BK 12 x SR 3 BK 12 x SR 3 BK 12 x SR 3 BK 12 x SR 3 BK 12 x SR 3 BKK 6 x 12* 12 M x BKK 6 x 15* 15 M x BKK 6 x 18* 18 M x BKK 6 x M x BKK 6 x M x BKK 6 x M x BKK 6 x M x BKK 6 x M x BKK 8 x M x BKK 8 x M x * Except BKK 6 x 12, BKK 6 x 15 and BKK 6 x 18. BKK s and Flamco BKP clips Pipe size A connection working load in N BKP 6 x M x BKP 6 x M x BKP 6 x M x BKP 6 x M x BKP 6 x M x BKP 6 x M x BKP 6 x M x BKP 8 x M x BKP 8 x M x BKP 8 x M x BKP 1.29

30 Ceiling, Wall and Floor Clips Flamco BKR clips for cast-iron sewer pipes, caps, BO/BOK connection clips, BSC clips and EB eye bolts Material for the cap is black PVC. BO electrolytically zinc-plated. BOK: clip copper, sleeve and nuts electrolytically zinc-plated. BSC clip sendzimir zinc-plated and fitted with a sound suppressing rubber lining. s and Flamco BKR clips s and T sockets Int. Pipe size connection working load A in N Suitable for connection clips Suitable for threaded rod Dimensions A B Ø C T 6 M T 8S M T 8 M T 12 M BKR 8 x M x BO BKR 8 x M x BO BKR 8 x M x BO BKR 8 x M x BO BKR 8 x M x BO BKR 8 x M x BO BKR s and BO/BOK connection clips Upper rod A hanging working load BK (I) clip in N BO 6 BK (I) 6 M BO 8 BK (I) 8 M BO 12 BK (I) 12 M T BOK 6 BKK 6 M BOK 8 BKK 8 M s and Flamco BSC clips Pipe size Dimensions conntections working load in inches A C Ø D N BSC 3 / / x BSC 1 / / x BSC 3 / / x BSC x BSC 1 1 / / x BSC 1 1 / / x BSC x BSC 2 1 / / x BSC x BSC x BSC x BO/BOK BSC s and EB eye bolts for BSC clips connection Dimensions working load H F Ø G N EB 25-8 M EB M EB 18-8 M EB 1.30

31 Sound suppressing strips SR, LB mounting tape, EB eye bolts, and HM bolts SR sound suppressing lining for clips (SR 0, 1, 2 and 3) and Flamco rail (SR 4, see page 6.2). When the SR strip is used the associated clip chosen must be larger than the outside diameter of the pipe to be fitted. Mounting strip type LB 17 zinc-plated. Mounting strip types LB 19 and 27 electrolytically zinc-plated, completely encased in plastic. Eye bolts EB and bolts HM are used to fix mounting strip LB to the ceiling. Ceiling, Wall and Floor Clips s and of SR sound suppressing strips Clip Quality Shore Dimensions Specific type strip hardness weight B H D gr./cm 3 SR 0 BM 8 10 x 1.25 LR 155/1 55º SR 1 BK 6 12 x 1.55 LR 155/1 55º BM x 1.55 LR 155/1 55º SR 2 BK 8 16 x 1.95 LR 155/1 55º BM x 1.95 LR 155/1 55º SR 3 BK x 2.75 LR 155/1 55º SR s and LB mounting tape Dimensions working load width holes A s and EB eye bolts LB Ø LB Ø LB Ø Screw thread Details EB 6 x 25 M 6 x 25 screw thread and slotted hole EB 8 x 20 M 8 x 20 screw thread and round hole EB 6 x 50 H 6 x 50 wood screw thread and slotted hole s and HM bolts Screw thread Details HM 6 x 25 M 6 x 25 hexagonal head bolt HM 8 x 20 M 8 x 20 cylinder head bolt LB EB 6 X 25 EB 8 X 20 EB 6 X 50 HM 6 X 25 HM 8 X

32 Ceiling, Wall and Floor Clips Flamco BM clips for mounting threaded pipe, fire tube, and thin-walled steel pipe The one-piece clip can withstand a very high load. Fixing material is hidden behind the clip. Plugs are supplied with the clips. wood screw with torx connection so that these can be screwed with a hand drill. Clip sendzimir, other parts electrolytically zinc-plated. s and Flamco BM clips nom. in inches tube Fire tube ext. Thin-walled steel pipe ext. connection working load is pull-out force in N version su hk hl BM 8 x M x BM 8 x M x BM 8 x M x BM 8 x M x BM 8 x M x BM 8 x M x BM 10 x M x BM 8 x 1 /4 1 / M x BM 8 x 3 /8 3 / M x BM 8 x 1 /2 1 / M x BM 8 x 3 /4 3 / M x BM 8 x M x BM SU BM HK BM HL BM 10 x 1 1 /4 1 1 / M x BM 10 x 1 1 /2 1 1 / M x BM 10 x M x BM 8 x M x BM 8 x M x BM 8 x M x BM 10 x M x BM 10 x M x BM 10 x M x BM 12 x M x BM 12 x M x BM 12 x / M x BM 12 x M x BM 12 x M x BM 12 x M x BM 12 x M x BM 12 x M x BM 12 x M x Plug sizes for types hk and hl: BM 8 Ø 10 x 50 BM 10 Ø 12 x 60 BM 12 Ø 14 x

33 Flamco BMA clips with noise suppressing rubber lining and Flamco BMK clips for fitting copper pipes BMA clips supplied with a noise suppressing rubber lining. BMA clips for mounting threaded pipe, sprinkler pipe, thin-walled steel and copper pipe. BMA clip sendzimir, other parts electrolytically zinc-plated. BMK clips for mounting copper pipe work. Ceiling, Wall and Floor Clips s and Flamco BMA clips tube Copper pipe nom. in inch. Sprinkler pipe Thin-w. steel pipe connec- tion working load in N working load* version 20 db (A) in N su hk BMA 8 x M x BMA 8 x M x BMA 8 x M x BMA 8 x M x BMA 8 x M x BMA 10 x M x BMA 10 x M x BMA 10 x M x BMA SU BMA HK BMA 8 x 3 /8 3 / M x BMA 8 x 1 /2 1 / M x BMA 8 x 3 /4 3 / M x BMA 8 x M x BMA 10 x 1 1 /4 1 1 / M x BMA 10 x 1 1 /2 1 1 / M x BMA 10 x M x BMA 10 x M x BMA 10 x M x BMA 10 x M x BMA 12 x M x BMA 12 x M x BMA 12 x / M x BMA 12 x M x BMA 12 x M x BMA 12 x M x BMA 12 x M x BMA 12 x M x BMA 12 x M x * To achieve good sound suppression do not overload the fitting. s and Flamco BMK clips Ext. connection working load version in N su hk hl BMK 8 x M x BMK 8 x M x BMK 8 x M x BMK 8 x M x BMK 8 x M x BMK 8 x M x BMK 10 x M x BMK 10 x M x BMK SU BMK HK BMK HL BMK 12 x M x BMK 12 x M x Plug sizes for types hk and hl: BM 8 Ø 10 x 50 BM 10 Ø 12 x 60 BM 12 Ø 14 x

34 Ceiling, Wall and Floor Clips Flamco DP clips and pipe support DP double pipe clips are supplied with a reinforced back plate with a slot of 18 x 8 mm. Loosening or tightening the bolt is possible with spanner or screwdriver. Pipe support fitted with slots 30 x 6.5 mm for attaching the DP double pipe clip and a slot 20 x 8.5 mm for mounting to the floor. DP pipe clips are adjustable for depth. s and for Flamco DP double clips with lining tube Thin-walled Dimensions nom. steel pipe in inches ext. dia mm A B DP DP 1 /2 1 / DP 3 /4 3 / DP s and for Flamco DP double clips without lining tube Thinwalled nom. in inches A B B steel pipe DP DP 1 /2 1 / DP 3 /4 3 / DP B DP DP DP 1 /2 1 / DP 3 /4 3 / DP DP 1 1 /4 1 1 / DP 1 1 /2 1 1 / s and Flamco DP single clips tube Thinwalled nom. in inches B B steel pipe B DP DP 1 /2 1 / DP 3 /4 3 / DP DP 1 1 /4 1 1 / DP 1 1 /2 1 1 / DP and of Flamco pipe support Dimensions A B C H Pipe support PIPE SUPPORT 1.34

35 RWK, RWK-G and RWS clips Particularly suitable for visible wall mounting with wire tack (diameter 8 mm). RWK-G fitted with noise-reducing EPDM rubber insert for temperatures from 40 C to C. With six-sided nut with saw slot for quick and easy fitting. RWS wtih two six-sided nuts with saw slot. RWK, RWK-G and RWS clips are electrolytically-galvanized. Ceiling, Wall and Floor Clips s and for RWK clips s and for RWK-G clips s and for RWS clips Ext. tube Length of wire tack in inches Ø 8 mm Ext. tube Length of wire tack in inches Ø 8 mm Ext. tube Length of wire tack in inches Ø 8 mm RWK 3 / / x RWK 1 / / x RWK 3 / / x RWK x RWK 1 1 / / x RWK 1 1 / / x RWK x RWK-G 3 / / x RWK-G 1 / / x RWK-G 3 / / x RWK-G x RWK-G 1 1 / / x RWK-G 1 1 / / x RWS 3 / / x RWS 1 / / x RWS 1 / / x RWS 3 / / x RWS x RWS 1 1 / / x RWS 1 1 / / x RWK RWK-G RWS 1.35