Global Finishing Solutions Table of Contents

Transcription

1 Global Finishing Solutions Table of Contents Spray Booths-Accessories ProClean - Open Face Filter Booths... 2 ProClean Extensions... 3 Redi-Pak TM - Bench Booths... 4 Ultra and Concept Paint Mix Rooms... 5 Truck/Heavy Duty Spray Booths... 6 Exhaust Stack Exhaust Stack Accessories... 9 Floor & Wall Covering... 10

2 Spray Booths-Accessories ProClean TM - Open Face Filter Booth Complete with... Class I Division, 2 fluorescent 4-tube lighting fixture(s)* (tubes not included) High efficiency exhaust fan(s) TEFC type, 3 phase multi-voltage ( /460/60 Hz/3 PH and 575/60/30) electric exhaust fan motor. Available in 17 1/2, 24, 34 and 40 diameters. Mount in horizontal or vertical stacks One complete set of filter media. Your choice of filtration media, pads or rolls Manometer (draft gauge) Top or rear exhaust outlet * For specific number of light fixtures, fan quantity and cutting diameter, consult specifications chart. Work Depths Overall Dimensions CFM Booth Height Width Depth Height Width Depth # of Light Fan Fan # Motor Required Delivery (Ft.) (Ft.) (Ft.) (Ft.) (Ft.) (Ft.) Fixtures Dia. 100 FPM HP 100 s.p. TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA TBI FA

3 ProClean TM Extensions Working Compartment Extensions Working compartment extensions are specifically designed to increase the working compartment depth of ProClean TM dry filter spray booths. Same 18 gauge galvanized panel construction as booth Available widths - 3 with or without Class I Div. 2 light fixture(s), all models; - 2 no lights, for booths up to 12 wide; - 6 with or without Class I Div. 2 light fixture(s), for booths wide Lights are UL and CSA approved. Tubes not included. Spray Booths-Accessories 6 Wide 8 Wide 10 Wide 12 Wide Extension Number Extension Number Extension Number Part Number Dimensions Of Lights Part Number Dimensions Of Lights Part Number Dimensions Of Lights TBIE-673-SLD 7 H-3 W No lights TBIE-1473-SLD 7 H-3 W No lights TBIE-1873-SLD 7 H-3 W No lights TBIE-673-LIGHT 7 H-3 W 1 light TBIE-1473-LIGHT 7 H-3 W 2 lights TBIE-1873-LIGHT 7 H-3 W 2 lights TBIE-672-SLD 7 H-2 W No lights TBIE-1476-SLD 7 H-3 W No lights TBIE-1876-SLD 7 H-6 W No Lights TBIE-683-SLD 8 H-3 W No lights TBIE-1476-LIGHT 7 H-6 W 2 lights TBIE-1876-LIGHT 7 H-6 W 2 lights TBIE-683-LIGHT 8 H-3 W 1 light TBIE-1483-SLD 8 H-3 W No lights TBIE-1883-SLD 8 H-3 W No lights TBIE-682-SLD 8 H-2 W No lights TBIE-1483-LIGHT 8 H-3 W 2 lights TBIE-1883-LIGHT 8 H-3 W 2 lights TBIE-6103-SLD 10 H-3 W No lights TBIE-1486-SLD 8 H-6 W No lights TBIE-1886-SLD 8 H-6 W No lights TBIE-6103-LIGHT 10 H-3 W 1 light TBIE-1486-LIGHT 8 H-6 W 2 lights TBIE-1886-LIGHT 8 H-6 W 2 lights TBIE-6102-SLD 10 H-2 W No lights TBIE SLD 10 H-3 W No lights TBIE SLD 10 H-3 W No lights TBIE-6123-SLD 12 H-3 W No lights TBIE LIGHT 10 H-3 W 2 lights TBIE LIGHT 10 H-3 W 2 lights TBIE-6123-LIGHT 12 H-3 W 1 light TBIE SLD 10 H-6 W No lights TBIE SLD 10 H-6 W No lights TBIE-6122-SLD 12 H-2 W No lights TBIE LIGHT 10 H-6 W 2 lights TBIE LIGHT 10 H-6 W 2 lights TBIE-873-SLD 7 H-3 W No lights TBIE SLD 12 H-3 W No lights TBIE SLD 12 H-3 W No lights TBIE-873-LIGHT 7 H-3 W 1 light TBIE LIGHT 12 H-3 W 2 lights TBIE LIGHT 12 H-3 W 2 lights TBIE-872-SLD 7 H-2 W No lights TBIE SLD 12 H-6 W No lights TBIE SLD 12 H-6 W No lights TBIE-883-SLD 8 H-3 W No lights TBIE LIGHT 12 H-6 W 2 lights TBIE LIGHT 12 H-6 W 2 lights TBIE-883-LIGHT 8 H-3 W 1 light TBIE-1673-SLD 7 H-3 W No lights TBIE-2073-SLD 7 H-3 W No lights TBIE-882-SLD 8 H-2 W No lights TBIE-1673-LIGHT 7 H-3 W 2 lights TBIE-2073-LIGHT 7 H-3 W 4 lights TBIE-8103-SLD 10 H-3 W No lights TBIE-1676-SLD 7 H-6 W No lights TBIE-2076-SLD 7 H-6 W No lights TBIE-8103-LIGHT 10 H-3 W 1 light TBIE-1676-LIGHT 7 H-6 W 2 lights TBIE-2076-LIGHT 7 H-6 W 4 lights TBIE-8102-SLD 10 H-2 W No lights TBIE-1683-SLD 8 H-3 W No lights TBIE-2083-SLD 8 H-3 W No lights TBIE-8123-SLD 12 H-3 W No lights TBIE-1683-LIGHT 8 H-3 W 2 lights TBIE-2083-LIGHT 8 H-3 W 4 lights TBIE-8123-LIGHT 12 H-3 W 1 light TBIE-1686-SLD 8 H-6 W No lights TBIE-2086-SLD 8 H-6 W No lights TBIE-8122-SLD 12 H-2 W No lights TBIE-1686-LIGHT 8 H-6 W 2 lights TBIE-2086-LIGHT 8 H-6 W 4 lights TBIE-1076-SLD 7 H-3 W No lights TBIE SLD 10 H-3 W No lights TBIE SLD 10 H-3 W No lights TBIE-1073-LIGHT 7 H-3 W 2 lights TBIE LIGHT 10 H-3 W 2 lights TBIE LIGHT 10 H-3 W 4 lights TBIE-1072-SLD 7 H-2 W No lights TBIE SLD 10 H-6 W No lights TBIE SLD 10 H-6 W No lights TBIE-1083-SLD 8 H-3 W No lights TBIE LIGHT 10 H-6 W 2 lights TBIE LIGHT 10 H-6 W 4 lights TBIE-1083-LIGHT 8 H-3 W 2 lights TBIE SLD 12 H-3 2 No lights TBIE SLD 12 H-3 W No lights TBIE-1082-SLD 8 H-2 W No lights TBIE LIGHT 12 H-3 W 2 lights TBIE LIGHT 12 H-3 W 4 lights TBIE SLD 10 H-3 W No lights TBIE SLD 12 H-6 W No lights TBIE SLD 12 H-6 W No lights TBIE LIGHT10 H-3 W 2 lights TBIE LIGHT 12 H-6 W 2 lights TBIE LIGHT 12 H-6 W 4 lights TBIE SLD 10 H-2 W No lights TBIE SLD 12 H-3 W No lights TBIE LIGHT12 H-3 W 2 lights TBIE SLD 12 H-2 W No lights TBIE-1273-SLD 7 H-3 W No lights TBIE-1273-LIGHT 7 H-3 W 2 lights TBIE-1272-SLD 7 H-2 W No lights TBIE-1283-SLD 8 H-3 W No lights TBIE-1283-LIGHT 8 H-3 W 2 lights TBIE-1282-SLD 8 H-2 W No lights TBIE SLD 10 H-3 W No lights TBIE LIGHT10 H-3 W 2 lights TBIE SLD 10 H-2 W No lights TBIE SLD 12 H-3 W No lights TBIE LIGHT12 H-3 W 2 lights TBIE SLD 12 H-2 W No lights 14 Wide 6 Wide 20 Wide 18 Wide 85

4 Spray Booths-Accessories Redi-Pak TM Bench Booths Bench Dry Filter Spray Booths Bench Booths are supplied complete with... High efficiency exhaust fan TEFC type, 3 phase multi-voltage ( /460/60 Hz/3 PH and 575/60/3) electric exhaust fan motor One complete set of filter media Manometer (draft gauge) Top or rear exhaust outlet Class 1, Division 2 four-tube fluorescent light fixtures (tubes included) Standard with 5 0 and 7 6 wide models. Best quality lighting air flow value Ideal for spraying small products Easy assembly All models provide minimum 100 FPM Top and rear panels are interchangeable allowing top or rear exhaust Easy Assembly This booth s tought 18-gauge G-90 galvanized, CNC punched panels are designed for fast, easy assembly, while creating a strong, rigid structure. High quality assembly hardware and illustrated assembly instructions are included. Work Depths Overall Dimensions No. of Light Fan Dia. Fan Number Motor CFM Height Width Depth Height Width Depth Fixtures HP Delivery Booth (ft.) (ft.) (ft.) (ft.) (ft.) s.p TBI-3BT /2 FA / TBI /2 FA / TBI /2 FA TBI FA Control Packages Allows you to orer one number and receive all the necessary electrical controls for a specific size booth. Each kit includes - 1 each fused disconnect with fuses - 1 each magnetic motor starter with overload heater and 120V control coil - 1 each 1/2 solenoid for safety interlock (120V) - 1 each light switch 120V or 277V - 1 each push button motor starter 1/2 HP Motor 208/60/3 CP /2 HP Motor 230/60/3 CP /2 HP Motor 460/60/3 CP /2 HP Motor 120/60/1 CP /2 HP Motor 230/60/1 CP HP Motor 208/60/3 CP HP Motor 230/60/3 CP HP Motor 460/60/3 CP HP Motor 120/60/1 CP HP Motor 230/60/1 CP Exhaust Stack Kits. Team Blowtherm offers a full line of engineered spray booth exhaust stqack and ducting products. Standard stack kit packages are available for most applications. Each stack kit includes 3-2 long pieces of plain stack, a stack head, 1-3 piece of universal stack with clean-out door. Stacks are sufficient for a maximum outsidde roof height of 15 with a minimum of 6 of duct extending above roof. Additional stack components can be ordered separately. Order: 17 1/2 Diameter Stack - KK-1700N 24 Dia.Stack -- KK-2400N 86

5 Ultra and Concept Paint Mix Rooms Spray Booths-Accessories Mix Room Specifications Pressurized downdraft airflow for ideal ventilation Ultra TM dual skin insulated panel construction or Concept TM four-sided rolled edge single skin panel construction Multiple standard sizes Maximum external height is 11 0 White precoated galvanized steel Pressurized blower with 1/2 HP motor Auxiliary exhaust blower; standard with Ultra TM model (optional with Concept TM model) High efficiency ceiling filter 4-tube light fixture(s) with color corrected T-8 tubes (quantity based on mix room size) (1) Personnel access door with observation window Built-in spill containment (no curb required) Mix room is designed to accept fire suppression system Two- and three-wall units are available for economical connection to dual skin booths Top perimeter facia package is standard Optional Equipment (partial listing) Vestibules Exhaust stack kit Auxiliary exhaust blower for Concept TM model Observation windows Additional access doors Fire suppression 87

6 Spray Booths-Accessories Truck/Heavy Duty Spray Booths Flexible Modular Design Multiple width, length and height combinations allows for expansion from 24 to unlimited lengths Three types of air flow systems: Downdraft, Pressurized Crossdraft and Crossdraft Quality Construction 18 gauge pre-coated and gauge structural steel components Precise tolerance engineering Wall-mounted 6-tube ETL approved Class 1 Division 2 fluorescent light fixtures for superior illumination Equipment installation by certified sales, installation and service technicians More Choices to meet your requirements Booth configurations: drive-thru, split and solid back and combinations Custom engineering for special applications Indoor and outdoor types 88

7 Exhaust Stack Spray Booths-Accessories TBI s Exhaust Air TM components are specifically designed, engineered and constructed for use with ProClean TM -style paint spray booths, and conform to NFPA 33 and NFPA 91 standards, and OSHA requirements. A full line of components is available to meet most spray booth exhaust air requirements. TBI recommends additional consideration be given to site sound level management issues. The proper spray booth exhaust ducting configuration, component selection, and relative positioning are key to quieter installations. TBI is the industry s leader in sound management technology. Exhaust Stack Kits TBI offers a full line of engineered spray booth exhaust stack and ducting products. Standard stack kit packages are available for most applications. Each stack kit includes 3-3 long pieces of plain stack, a stackhead, 1-3 piece universal stack with cleanout door, and a flat roof flange for a fireproof roof sufficient for a maximum outside roof height of 15 with a minimum of 6 of duct extending above roof. Additional stack components can be ordered separately. 17 1/2 KK KK KK KK-4000 Five Easy Ways to Order from Fluid-Air Products Inc. CALL Toll-Free to order MAIL your order Gravois Rd. St. Louis, MO FAX your order your order info@fluidair.com WEBSITE Visit our site and link to for on-line ordering 89

8 Spray Booths-Accessories Exhaust Stack (cont ) Plain Exhaust Pipe Section Straight 3 long section, with one end corrugated for easy installation. All sizes constructed from galvanized steel and require some assembly. 17 1/2 XH XH XH XH-4040 Universal Exhaust Pipe with Removable Clean Out Door Straight 3 long section, with large, easily-removed panel for inspection and cleaning of exhaust fan components. Designed to be installed directly below (or prior to ) the TBI exhaust fan. All sizes constructed from galvanized steel and require some assembly. 17 1/2 XH XH XH XH-4050 Plain Exhaust Pipe with Removable Clean Out Door Straight 3 long section, with large, easily-removed panel for inspection and cleaning inside of exhaust stack. One end is corrugated for easy installation. TBI recommends one section every 9 of exhaust stack, and prior to offsets/transitions, allowing periodic access. All sizes constructed from galvanized steel and require some assembly. 17 1/2 XH XH XH XH-4020 Elbows Half radius throat for tight applications where full throat will not fit. All sizes are constructed from galvanized steel and shipped assembled. 17 1/2 ELB ELB ELB ELB /2 XH XH XH XH-4514 Stackhead Weather-tight design provides automatic protection against rain, snow and backdrafts for the exhaust system, spray booth and operator. All sizes constructed from galvanized steel and require some assembly. 17 1/2 XH XH XH XH-4030 Muffler (Sound Attenuator) Exhaust Air TM mufflers will assist with site sound management. The units are designed to be installed between the exhaust system origination point and the exhaust fan. Each installed muffler can reduce the noise level from 2-5 db in most situations. In today s environment this is a very important consideration. All sizes constructed from galvanized steel and acoustical sound attenuation materials, and includes one fan connector ring. Shipped assembled. 17 1/2 MUF MUF MUF MUF-4063 Roof Flanges Available for fire rated and non-fire rated roofs with a maximum roof slope of 21 o in 3 o increments. Roof flanges built for nonfire proof roofs have a built-in thimble to penetrate the roof opening. Fireproof type Roof Slop 0 o Non-Fireproof type Roof Slop 0 o 17 1/2 XH XH XH XH /2 XH XH XH XH /2 AS AS AS AS-4040 Automatic Shutter For exhausting through side of building. Non-motorized louvers built into a square housing. Includes square to round transition. 90

9 Exhaust Stack Accessories Spray Booths-Accessories Fan Motor Housing Weather-tight, ventilated enclosure designed to protect the electric fan motor when installed outside. Constructed from galvanized steel and requires some assembly. 17 1/2 XH XH XH XH-4090 Stack Band Flanged steel band with holes for fastening to stack. Included are 3 eyebolts for attaching guy wire cable to vertical stack or hangers on horizontal stack sections. 17 1/2 XH XH XH XH-4255 Fan Support Frame for Flat or Pitched Roof Outdoor roof-mounted unit specifically designed to support the exhaust fan and connected exhaust stack. TBI recommends using for all outdoor roof-mounted exhaust fans. Constructed from galvanized angle iron and requires some assembly. 17 1/2 JF JH JJ FFA-400 Fan Connector Ring For connecting the exhaust fan to other exhaust system stack components. Note: Two (2) connector rings are supplied with every TBI fan assembly as standard. 17 1/2 SR SR SR SR-4005 Cable Accessory Kit 75 of 1/4 galvanized cable, anchors, turnbuckles and clamps for installation of 3 guy wires to above roof exhaust stack. Note: Order stack band separately. Stack Diameter All sizes Part Number XH

10 Spray Booths-Accessories Spray Booth Products: Floor & Wall Covering Protects Paint Spray Booth Floors and Walls from Overspray Clean Floor TM Flame Retardant Paper Durable, flame-retardant paper floor covering. Allows fast, easy booth clean-up - no scraping, stripping or scrubbing. Virtually eliminates tracking of paint from spray booth to other paint areas Reduces fire hazard potential due to accumulation of paint overspray Maximum durability even where dollies, fork lifts, or other heavy equipment is utilized BoothCoat TM Peelable Wall Coatings Peelable, non-flammable, white wall coating. Waterbased Easy on- sprays on in minutes Easy off - peels off in sheets Fast drying Reduces costly clean-ups and downtime Visibility enhancing bright white Excellent coverage per gallon For wet, dry and powder booths Flame Retardant Paper Master Corrugated Product Flame Retardant Paper Number of Paper Rolls Case Dimensions: Shipping Weight Number Roll Dimensions Per Case (Length x Width x Height) (Pounds) x x 8 x x x 8 x x x 8 x x x 8 x x x 8 x 8 75 Peelable Coatings for Paint Spray Booth Walls Booth Coat Product Booth Coat Number of Units Shipping Weight Number Product Description Per Product Number Five Gallon Pail Dimension (Pounds) Gallon Cans; Dries Clear 1 7 x 7 x Gallon Pails; Dries White 1 15 height x 39 diameter 55 92