CONTRACTOR PUMPS & GENERATORS BUILT FOR WORK. Electric Submersible Pumps Engine Driven Pumps Generators Accessories

Transcription

1 CONTRACTOR PUMPS & GENERATORS BUILT FOR WORK Electric Submersible Pumps Engine Driven Pumps Generators Accessories w w w. t s u r u m i p u m p. c o m

2

3

4 NK3-22 NK3-22L LB(T)-800 LB-800A

5 Total Head (ft) LB-480 & LB-480A 60Hz 2 Pole 2/3HP Electrodes submerged in water closing circuit for electric current. The pump starts to operate. Pump begins operating. Water level falls. Water level has fallen. Electrodes in air opening circuit for electric current. Timer starts and pump continues to operate. Pump continues operating. Water level falls. Timer continues pump operation for approximately one minute. If water again contacts, the electrodes timer is cancelled and pump continues operating. Pump continues operating. Water level falls. Timer stops after approximately one minute. Pump stops. Water level rises. Water level rises to contact electrodes and the pump restarts. Pump begins operating. Water level falls Capacity (gal/min) Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Continuous Running Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) LB-480 2/3 Single / / LB-480A 2/3 Single /4 11 1/4 4 1/2 * 29 *Pump Starting Water Level

6 Capacity (gal/min) Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Continuous Running Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) LB Single / / LBT Three / / Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Pump Starting Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) LB-800A 1 Single /4 13 7/16 6 3/4 38 Total Head (ft) LB-800(A) LBT Hz 2 Pole 1HP

7 " Total Head (ft) LB-1500 LBT Hz 2 Pole 2HP Capacity (gal/min) Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Continuous Running Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) LB Single 3 (2)* /8 23 5/16 3 1/8 85 LBT Three 3 (2)* /8 23 5/16 3 1/8 85 *2" is optional

8 Total Head (ft) HS(Z)3.75S HS(Z)2.4S 60Hz 2 Pole 1/2-1HP Capacity (US gal/min) Motor Output Discharge Bore Cable Length Dimension (inch) Continuous Running Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) HS2.4S 1/2 Single / /16 3 1/2 30 HS3.75S 1 Single / /16 3 1/2 50 Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. ** Pump Starting Level *Minimum Required Space Start Range Stop Range 1 5/8" 3 1/2" *Minimum Required Space Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Pump Starting Shipping Weight Phase (HP) (inch) (ft) *Diameter *Heights Water Level (inch) (lbs.) HSZ2.4S 1/2 Single /2 15 1/8 15 1/8 30 HSZ3.75S 1 Single /2 17 1/2 17 1/2 50 *Minimum Required Space

9 Total Head (ft) HSD2.55S 60Hz 2 Pole 3/4HP Capacity (gal/min) Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Continuous Running Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) HSD2.55S 3/4 Single /8 15 3/8 4 1/8 39 " Total Head (ft) NK2-15 NK3-22 NK3-22L 60Hz 2 Pole 2-3HP Capacity (gal/min) Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Continuous Running Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) NK Single / /2 3 1/4 80 NK Single / /2 3 1/4 81 NK3-22L 3 Single /4 26 1/2 4 3/4 90

10 Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Continuous Running Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) LSR2.4S 2/3 Single /4 11 3/ Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Continuous Running Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) LSC1.4S 2/3 Single 3/4 7 11/ /

11 F Max. Capacity (GPM) Max. Head (ft) Discharge Size (in) - Internal Thread Nominal HP RPM Rated Current at 115V (amps) Standard Cable Length (ft) Shipping Weight (lbs.) Total Head (ft) L Capacity (gal/hour) Max. Capacity (GPH) Max. Head (ft.) Body Material Discharge Size (in.) & Parts Material Impeller Shaft Seal Voltage (V) Standard Cable Length (ft.) Shipping Weight (lbs.) L High Impact ABS Thermo-Plastic 1-1/2 & 2 Polypropylene Glass/Nylon Composite Mechanical (Carbon/Ceramic)

12 LH23.0W 60Hz 2 Pole 4HP LH Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Continuous Running Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) LH23.0W 4 Three / /16 7 7/8 121 LH Three / /8 5 7/8 113

13 60Hz 2 Pole 2-15HP Certified by Intertek Testing Service to UL and CSA standards for submersible construction pumps. Motor Output Discharge Bore Cable Length Dimension (inch) Continuous Running Shipping Weight Phase (HP) (inch) (ft) Diameter Heights Water Level (inch) (lbs.) KTZ Three /4 25 1/2 4 3/4 78 KTZ Three /4 25 1/2 4 3/4 78 KTZ Three /4 26 5/16 4 3/4 107 KTZ Three /4 26 5/16 4 3/4 107 KTZ Three /8 26 1/4 5 7/8 170 KTZ Three /8 26 5/8 5 7/8 167 KTZ Three /8 27 1/16 5 7/8 168 KTZ /2 Three / /8 5 7/8 211 KTZ /2 Three / /4 5 7/8 3 KTZ Three /16 7 1/2 279 KTZ Three 4 (6)* (14 9/16)* 31 13/16 (31 7/8)* 7 1/2 300 KTZ Three / /16 7 1/2 349 KTZ Three 4 (6)* / /16 (33 11/16)* 7 1/2 357 *6 " Discharge Bore for KTZ67.5 & KTZ611 is optional

14

15 TE3-50HA TE3-80HA " " " " Total Head (ft) TE2-25H Capacity (gal/min) Suction Size Engine 1" NPSH Max. Output (hp/rpm) Dimensions (inches) Length Width Height Shipping Weight (lbs.)

16 EPT3-50HA EPT3-100HA EPT3-80HA Discharge / Suction Size 2" NPT 3" NPT 4" NPT Engine Max. Output (hp/rpm) Dimensions (inches) Length Width Height Shipping Weight (lbs.) "" "" Discharge Size Suction Size Engine Max. Output (hp/rpm) Dimensions (inches) Shipping Weight (lbs.) 1" x 2, 1.5" x 1 NPSH 1.5" NPSH

17 Total Head (ft*) A B C D A=TDE5-0 B=TD5-0 C=TDE5-300 D=TD Capacity (US gal/min) (*) Convert to psi, divide by 2.31 Liquid - Water specifc gravity 1.0 TD5-0 TD5-300 TDE5-0 TDE5-300 Discharge / Suction Size (inches) 2" NPT 3" NPT 2" NPT 3" NPT Engine Max. Output (hp/rpm) Honda GX1 4 / 3600 Honda GX1 4 / 3600 N/A 4 / 1725 N/A 4 / 1725 Dimensions (inches) Length Width Height Shipping Weight (lbs.)

18 Total Head (ft)* EPT5-150HA EPT5-150KD Capacity (US 3600 RPM * Convert to PSI, divide by 2.31 Liquid-Water specific gravity 1.0 ETP5-150HA EPT5-150KD Discharge Suction Size (inches) 6" NPT 6" NPT Engine Max. Output Dimensions (inches) Engine Type (hp/rpm) Length Width Height Unleaded Gasoline Honda GX / Diesel Koehler KDW / Shipping Weight (lbs.)

19 1 100 Total Head (ft) EPT Ft Ft 25Ft 15Ft 10Ft 5Ft EPT2-150 Ft 15Ft 10Ft 5Ft Capacity (US 1800RPM EPT2-100 EPT2-150 Discharge / Suction Size 4" NPT 6" NPT Engine Consult Factory Consult Factory Max. Output (hp/rpm) Consult Factory / 1800 Consult Factory / 1800 Dimensions (inches) Length Width Height Shipping Weight (lbs.) 116 1/2 72 1/2 77 Consult Factory 126 1/2 72 1/2 77 Consult Factory

20 Total Head (ft) EPT4-150 EPT4-150Q 25Ft Ft 15Ft 10Ft Capacity (US 20RPM EPT4-150Q Discharge / Suction Size (inches) 6" ANSI 6" ANSI Engine Max. Output (hp/rpm) Consult Factory Consult Factory / 20 Consult Factory Consult Factory / 20 Dimensions (inches) Length Width Height Shipping Weight (lbs.) Consult Factory Consult Factory

21 FLUID MOTOR PUMP DIMENSION LB-480 LB-480A LB-800 LB-800A LB-1500 HS2.4S HSZ2.4S HS3.75S HSZ3.75S HSD2.55S 2" Automatic 2" Extreme 2" Dewatering 2" Slimline 2" Automatic 3" Slimline 2" Sand/Solids 2" Automatic 2" Sand/Solids 3" Automatic Dewatering Durable Sand Pump Pump Slimline Pump Pump Trash Pump Trash Pump Trash Pump Trash Pump Pump Pump Max. Capacity (GPM) Max. Head (ft.) Solid Diameter (in.) Impeller Semi-Open Impeller Material Urethane Rubber High Chrome Urethane Rubber High Chrome Casing Material Wear Plate Material Shaft Seal - Type / Material Seal Lubricant - Type Seal Lubricant Amount (ounces) Seal Protection Discharge Connection Butadiene Rubber, Natural Rubber & Steel Natural Rubber Ductile Iron Casing " MNPT (2" is optional) Motor Output (HP) 2/ /2 1 3/4 Phase Voltage (V) Amperage - Rated Current Amperage - Starting Current Type Bearings Insulation Class Motor Protection (Builtin) Plug Configuration (Nema) Cable - # of Conductors x AWG Standard Cable Length (ft) Max. Cable Length (ft) Recommended Generator Capacity (watts) 26.2 (115V) 5.9 (115V) 3.0 (2V) 10.5 (115V) 5.2 (230V) 5.2 (110V) 2.7 (2V) 9.7 (115V) 4.9 (230V) 13.2 (230V) 112 (115V) (115V) 5.9 (2V).6 (115V) 12.6 (230V) 12.4 (110V) 5.9 (2V) 29.7 (115V) 18.5 (230V) (230V) B 5-15P (115V) No Plug (2V) 5-15P (115V) No Plug (230V) No Plug 5-15P (110V) No Plug (2V) 5-15P (115V) No Plug (230V) Optional Float Switch TS-301 N/A 3C x 12AWG (110V) 3C x 16AWG 3C x 14AWG 3C x 16AWG 3C x 14AWG 3C x 14AWG (230V) 2" MNPT 7.3 (115V) 3.7 (230V) 19.0 (115V) 12.6 (230V) 3C x 16AWG (115V) 160 (230V) 90 (115V) 350 (230V) TS-302 (115V) TS-303 (230V) N/A TS-303 (230V Operation only) TS-301 (110V) N/A TS-302 N/A TS-301 Diameter (inches) 7 3/8 8 3/4 7 9/16 8 3/4 7 3/8 10 1/ /2 12 7/ /2 10 3/8 Height (inches) 11 1/4 11 1/4 13 7/ / / / /8 15 5/ /2 15 3/8 Continuous Running Water Level (in.) 110 (115V) 4 (2V) 100 (115V) 400 (230V) 2 4 1/2 (Pump Starting Water Level) Semi-Vortex Butadiene Rubber & Natural Ethylene Propylene Rubber Rubber Urethane Rubber 2" MNPT E 2 6 3/4 (Pump Starting Water Level) SAE 10W/W or Turbine Oil (ISO VG32) V-Ring and Oil Lifter (Oil Lifter is patented by Tsurumi Pump) Single Phase 115 or or or or 230 Continuous Duty, Air Filled, 3600 RPM, 60Hz Double shielded, Permanently lubricated, High-temp C3 with B-10 life of 60,000 hours Miniature Protector Circle Thermal Protector Miniature Protector Circle Thermal Protector 3 1/8 3 1/2 2" MNPT 3" MNPT 1 (115V) 460 (2V) 100 (115V) 430 (230V) 15 1/8 (Pump Starting Water Level) Gray Iron Casing Semi-Vortex Integral Part of Casting Double Inside Mechanical Seal with Silicon Carbide faces on lower seals and Carbon Ceramic Faces on upper seals 3 1/2 17 1/2 (Pump Starting Water Level) Shipping Weight (lbs.) E 4 1/8

22 FLUID MOTOR PUMP DIMENSION LSR2.4S LSC1.4S NK2-15 NK3-22 NK3-22L LBT-800 LBT-1500 LH23.0W LH33.0 2" Ground Level 1" Floor Level 3" Heavy Duty 3" Heavy Duty 3" Heavy Duty 2" 3-Phase 3" 3-Phase 2" 3-Phase 3" 3-Phase Pump Pump High Head High Head High Flow Slimline Pump Slimline Pump Slimline Pump Slimline Pump Max. Capacity (GPM) Max. Head (ft.) Solid Diameter (in.) Impeller Semi-Vortex Semi-Open Semi-Vortex Semi-Open Impeller Material Casing Material Wear Plate Material Shaft Seal - Type / Material Seal Lubricant - Type Seal Lubricant Amount (ounces) Seal Protection Discharge Connection Urethane Urethane Rubber Ductile Iron Casing High Chrome High Chrome High Chrome Rubber Ethylene Propylene Rubber Cast Iron Natural Rubber Ductile Cast Iron Ductile Iron Urethane Rubber Integral Part of Casting Natural Rubber Integral Part of Casting Casting " MNPT 3/4" MNPS 2" MNPT 3" MNPT (2" is optional) 2" MNPT Motor Output (HP) 2/ Phase Voltage (V) 115 or or 2 2 Amperage - Rated Current Amperage - Starting Current Type Bearings Insulation Class Motor Protection (Builtin) Plug Configuration (Nema) Cable - # of Conductors x AWG Standard Cable Length (ft) Max. Cable Length (ft) Recommended Generator Capacity (watts) 3" MNPT / 1.7 / / 4.0 / 5.9 / / / 6.0 / / / / 7.0 / / 36 / / 49 / 35 3C x 16AWG 3C x 12AWG 3C x 14AWG 4C x 16AWG 4C x 14AWG Optional Float Switch SLS-LSR32 SLS-LSC 75 (110V) 300 (2V) (230V) 1800 (460V) 2730 (575V) 190 (230V) 760 (460V) 1270 (575V) Diameter (inches) 8 1/4 7 11/16 9 7/16 9 7/16 9 1/4 7 9/16 7 3/8 7 5/16 7 5/16 Height (inches) 11 3/8 12 7/ /2 24 1/2 26 1/2 13 7/ / / /8 Continuous Running Water Level (in.) E Miniature Protector 5-15P 110 (115V) 4 (2V) Double Inside Mechanical Seal with Silicon Carbide SAE 10W/W or Turbine Oil (ISO VG32) V-Ring and Oil Lifter (Oil Lifter is patented by Tsurumi Pump) Single Phase TS-304 (115V) TS-303 (2V) 3" MNPT Continuous Duty, Air Filled, 3600 RPM, 60Hz Double Shielded, Permanently Lubricated B /4 3 /14 4 3/ /8 7 7/8 5 7/8 Shipping Weight (lbs.) TS-303 E Circle Thermal Protector No Plug Three Phase Control Panel Closed Oil Lifter (Patented by Tsurumi) / 460 / / 460 / 575 F 180 (8-230V) 810 (460V) 1300 (575V)

23 KTZ21.5 KTZ31.5 KTZ22.2 KTZ32.2 KTZ23.7 KTZ33.7 KTZ43.7 KTZ35.5 KTZ45.5 KTZ47.5 KTZ67.5 KTZ411 KTZ611 Wear Resistant Pumps FLUID MOTOR PUMP DIMENSION Max. Capacity (GPM) Max. Head (ft.) Solid Diameter (in.) Impeller Impeller Material Casing Material Wear Plate Material Shaft Seal - Type / Material Seal Lubricant - Type Seal Lubricant Amount (ounces) Seal Protection Discharge Connection Motor Output (HP) Phase Voltage (V) Amperage - Rated Current Amperage - Starting Current Type Bearings Insulation Class Motor Protection (Builtin) Plug Configuration (Nema) Cable - # of Conductors x AWG Standard Cable Length (ft) Max. Cable Length (ft) Recommended Generator Capacity (watts) Optional Float Switch 2" MNPT 3" MNPT 2" MNPT 3" MNPT 2" MNPT 3" MNPT 4" MNPT 3" MNPT 4" MNPT 4" MNPT 4" MNPT (6" Optional) Diameter (inches) 9 1/4 9 1/4 11 1/8 12 1/ Height (inches) 25 1/2 26 5/ /4 26 5/8 27 1/ /8 28 3/4 Continuous Running Water Level (in.) (230V) 980 (460V) 1660 (575V) 4/3/4 140 (230V) 680 (460V) 1090 (575V) 4 3/4 5 7/8 Semi-Open High Chrome Cast Iron Ductile Cast Iron Double Inside Mechanical Seal with Silicon Carbide SAE 10W/W or Turbine Oil (ISO VG32) Lip Seal and Oil Lifter (Oil Lifter is patented by Tsurumi Pump) Three Phase / 460 / / 24 / / 37 / / 59 / / 84 / / 114 / 82 Continuous Duty, Air Filled, 3600 RPM, 60Hz Double Shielded, Permanently Lubricated Circle Thermal Protector " MNPT Shipping Weight (lbs.) No Plug 4C x 16AWG 4C x 14AWG 4C x 12AWG 4C x 10AWG 4C x 8AWG (230V) 7 (460V) 1150 (575V) F N/A 180 (230V) 850 (460V) 1350 (575V) 5 7/ (230V) 1010 (460V) 1610 (575V) 31 13/16 7 1/ /4 32 5/16 7 1/2 4" MNPT (6" Optional) / 3.1 / / 4.5 / / 6.8 / / 10.0 / / 13.3 / / 18.6 / / 150 / (230V) 1050 (460V) 690 (575V)

24 FLUID PUMP ENGINE DIMENSION TE2-25H TE3-50HA TE3-80HA TE2-100HA EPT3-50HA EPT3-80HA EPT3-100HA THP-4070HA 1" Dewatering 2" Dewatering 3" Dewatering 4" Dewatering High Pressure 2" Trash Pump 3" Trash Pump 4" Trash Pump Pump Pump Pump Pump Pump Max. Capacity (GPM) Max. Capacity (GPH) Max. Head (ft.) Max. Solid Diameter (in.) Impeller Type Impeller Material Volute Casting Material Water Plate Material Pump Casing Material Shaft Seal - Type / Material Seal Lubricant - Type Discharge Connection Suction Connection Brand " NPSH 1" NPSH 2" NPT 2" NPT 3" NPT 3" NPT 4" NPT 4" NPT 2" NPT 2" NPT 3" NPT 3" NPT 4" NPT 4" NPT Closed Aluminum 1"x2, 1.5"x1 NPSH 1.5" NPSH GX-25 GX-1 GX-160 GX-240 GX-160 GX-240 GX-360 GX-160 Type Output (HP) RPM Fuel Fuel Tank Capacity (US Gallon) Continuous Run Time Per Tank (hr.) Starting Method Cast Iron Integral Part of Volute Die Cast Aluminum Semi-Open Silicon Carbide Mechanical Seal Air-Cooled, 4-Cycle Cylinder with Oil Sensor Recoil Starter Length (inches) /2 1/ /4 27 1/2 30 1/8 21 Width (inches) /8 16 1/ /4 1/8 1/8 16 Height (inches) /8 18 1/8 23 1/2 17 3/8 25 5/ Shipping Weight (lbs.) Cast Iron Water Honda Unleaded Gasoline High Chrome Iron Casting Stainless Steel Cast Aluminum Integral Part of Volute

25 FLUID PUMP ENGINE DIMENSION TD5-0 TD5-300 TDE5-0 TDE5-300 EPT5-150HA EPT5-150KD EPT2-100 EPT2-150 EPT4-150 EPT4-150Q 2" Diaphragm Pump 3" Diaphragm Pump 2" Electric Diaphragm Pump 3" Electric Diaphragm Pump 6" Trash Pump 6" Trash Pump 4" Heavy Duty Trash Pump 6" Heavy Duty Trash Pump 6" Heavy Duty Trash Pump 6" Heavy Duty Trash Pump Max. Capacity (GPM) Max. Capacity (GPH) Max. Head (ft.) Max. Solid Diameter (in.) Impeller Type Impeller (Diaphragm) Material Volute Casting Material Water Plate Material Pump Casing Material Shaft Seal - Type / Material Seal Lubricant - Type Discharge Connection Suction Connection 1 1/2 1 5/8 1 1/2 1 5/ " NPT 2" NPT 3" NPT 3" NPT 2" NPT 2" NPT 3" NPT 3" NPT 6" NPT 6" NPT 6" NPT 6" NPT Brand Honda N/A Honda Koehler GX-1 N/A GX-670 KDW1003 Type Air-Cooled V-Twin w/ Oil Sensor Liquid Cooled, 4-Cycle, 3 Cylonder w/ Tach, Hour meter / Oil Sensor Output (HP) RPM Fuel Fuel Tank Capacity (US Gallon) Continuous Run Time Per Tank (hr.) Air-Cooled, 4-Cycle Cylinder with Oil Sensor Unleaded Gasoline Diaphragm TPE N/A N/A Sand Cast Aluminum N/A N/A Unleaded Gasoline 4" NPT 4" NPT Consult Factory Consult Factory Consult Factory Consult Factory Consult Factory 6" NPT 6" NPT Consult Factory Consult Factory Consult Factory Consult Factory Consult Factory V Electric Start, Battery not Starting Method Recoil Starter Electric Motor Electric, 12V (Battery Included) included Length (inches) / / / /2 Width (inches) /2 72 1/ /8 Height (inches) / /16 Cast Iron Shipping Weight (lbs.) N/A Electric Motor (115V) N/A N/A Stainless Steel Aluminum Silicon Carbide / Buna Water 12 Semi-Open Ductile Iron Cast Iron Tungsten Carbide / Viton & 304 Stainless Steel Grease Water Cooled 4-Cycle Tier 4 Diesel 1800 Rubber Lined Cast Iron Diesel Cast Iron Consult Factory 3 Fully Enclosed Cast Iron Tungsten Carbide Silicon Carbide Oil 6" ANSI Flange 6" ANSI Flange Consult Factory Consult Factory Liquid Cooled, 4-Cycle Four Cylinder w/ Temperature Oil / Sensor Consult Factory 20 Consult Factory

26

27 TPG4-3000HDX TPG4-4500HDX Max. / Rated Output (watts) 2600 / / 3600 Max. / Rated Current (1V / 240V) 23.3 / /30, 18.7/15 Voltage (V) (60Hz) 1 1 / 240 AC Outlet Replacement 1-NEMA 5-R Duplex (A, 12A, W/GFCI) 2-NEMA 5-A Duplex (A, 12A, W/GFCI) 1-NEMA L5-30R (30A, 1V, Twist Lock) 1-NEMA L14-30R (30A, 1/240V, Twist Lock) Engine GX160T2 GX240T2 Maximum HP 5.5 (3600RPM) 8.0 (3600RPM) Displacement 163 (10inch 3 ) 242 (15inch 3 ) Fuel Tank Capacity (gallon) Running Time (Rated load) Starting System Recoil Recoil Noise Level (Rated Load) 64dB 68dB Shipping Size (LxWxH) (inches) 24.4 x 19.5 x x 23.4 x 22.6 Shipping Weight (lbs.) TPG4-6000HDX TPG4-7000HDX TPG4-7000HDXE Max. / Rated Output (watts) 5500 / / 6000 Max. / Rated Current (1V / 240V) 45.8/40, 22.9/ 56.7/50, 28.3/25 Voltage (V) (60Hz) 1 / / 240 AC Outlet Replacement 2-NEMA 5-A Duplex (A, 12A, W/GFCI) 1-NEMA L5-30R (30A, 1V, Twist Lock) 1-NEMA L14-30R (30A, 1/240V, Twist Lock) Engine GX340T2 GX390T2 Maximum HP 11.0 (3600RPM) 13.0 (3600RPM) Displacement 337 (21inch 3 ) 389 (24inch 3 ) Fuel Tank Capacity (gallon) Running Time (Rated load) Starting System Recoil Recoil (HDX), Electric (HDXE) Noise Level (Rated Load) 72dB 78dB Shipping Size (LxWxH) (inches) 27.6 x 23.4 x x 23.4 x 22.6 Shipping Weight (lbs.) (HDX), 199(HDXE)

28 Tether Length (in.) Pumping Range (in.) Note: Due to cable weight, pumping range above horizontal is NOT equal to pumping range below horizontal. As tether length increases, so does the variance of the pumping range. Pumping ranges are based on testing in non-turbulent conditions. Actual conditions may vary. Use these values as a guide. Tether Length Pumping Range Automatic Float Switch Required Nema Pump Float Maximum Pump Running Current Maximum Pump Starting Current Plug Switch Configuration For Pump (s) Cord Length (ft.) TS amps / 1 VAC, 60Hz 85 amp / 1 VAC, 60Hz 5-15P HS2.4S (110V) HSD2.55S (115V) 30 LB-480 (110V) TS amp / 1 VAC, 60Hz 85 amp / 1 VAC, 60Hz 5-15P HS3.75S(115V) LB-800 (115V) 30 TS amp / 250 VAC, 60Hz 85 amp / 250 VAC, 60Hz 6-15P HS2.4S (2V) HS3.75S (230V) LB-480 (2V) LB-800 (230V) LB-1500 (230V) 30 NK2-15 (2V) NK3-22 (2V) NK3-22L (2V) TS amp / 1 or 230 VAC, 60Hz 140 amp / 250 VAC, 60Hz Hardwire to breaker box NK2-15 (115V) 30 SLS-LSR32 13 amps / 1 VAC, 60Hz 85 amp / 1 VAC, 60Hz 5-15P LSR2.4S 32 SLS-LSC 13 amps / 1 VAC, 60Hz 85 amp / 1 VAC, 60Hz 5-15P LSC1.4S Hose Kit Discharge Hose Other Hoses Hose Kit with NPT NPT Suction Hose Quick Connect Mill Hose Hose Accessories Suction Hose Hose Kit with Quick Connect NPT Quick Connect Hose Nozzle Quick Connect 'A' Quick Connect 'F'

29 The Sand Kit can be added to the NK Series to suspend sand and prevent sand lock. Wheel Kit PGWK-0X for TPG4 Series Generator & Gas Engine Pumps Lifting Bail PGLB-1X PGWK-0X Wheel kit for TPG4 generators & TE/EPT/THP engine pumps PGLB-1X Lifting bail for all TPG4 generators & TE/EPT/THP engine pumps* *excluding TPG4-3000HDX Heavy-duty and easy to install our wheel kits, and lifting bails fit all of Tsurumi Generators. Available for the HS2.4S, the Residue Kit allows pumping of residual water down to 0.4 inches. For NK, KTZ, LH, and LHW Series MANUAL CONTROL PANEL INCLUDES: Manual Simplex Operation Nema 4X, Lockable Fiberglass Enclosure IEC Contactor Hand/Off Selector Switch UL Listed Cable Grips In Control Panel AUTOMATIC CONTROL PANEL INCLUDES: Automatic or Manual Simplex Operation Nema 4X, Lockable Fiberglass Enclosure IEC Rated Magnetic Contactor Hand/Off Auto Selector Switch UL Listed Includes (2) Ft. Mechanical Float Switches Cable Grips In Control Panel Inverter Panels are available for LHW and KTZ series Single Phase operation

30 Electric Submersible Pumps Float Switch Sand Kit Residue Kit Sand Kit ONLY 2" Straight Discharge 3" Straight Discharge MODEL LB-480 TS-301 LB-480A LB-800 TS-302 LB-800A LB-1500 TS-303 (2V Only) HS2.4S TS-301 HS-RK HSZ2.4S HS-RK HS3.75S TS HSZ3.75S HSD2.55S TS NK2-15 TS-304 (115V) / TS-303 (2V) K15-SK NK3-22 TS-303 K22-SK NK3-22L TS-303 K22-SK LSR2.4S SLS-LSR32 LSC1.4S SLS-LSC Electric Submersible Pumps (continued) 2" Discharge Hose NPT 2" Discharge Hose Quick Connect 2" Quick Disconnect 'A' 3" Discharge Hose NPT 3" Discharge Hose Quick Connect 3" Quick Disconnect 'A' XXHS2D XHD2QC50 G0-A-AL XXHS3D XHD3QD50 G300-A-AL MODEL LB-480 X X X LB-480A X X X LB-800 X X X LB-800A X X X LB-1500* X X X X X X HS2.4S X X X HSZ2.4S X X X HS3.75S X X X HSZ3.75S X X X HSD2.55S X X X NK2-15 X X X NK3-22 X X X NK3-22L X X X LSR2.4S X X X LSC1.4S * Standard discharge size is 2". 3" is optional.

31 Engine Driven Pumps: Discharge Size 1" and 1 1/2" Wheel Kit Lifting Bail 1" Mill Hose 1" Suction Hose NPT 1.5" Mill Hose 1.5" Suction Hose NPT 1" Lexan Nozzle 1.5" Lexan Nozzle PGWK-0X PGLB-1X Wheel kit ONLY Lifting Bail ONLY XHM1N50 XHS1N XHM15N50 XHS15N XHLN1N XHLN15N MODEL TE2-25H X X THP-4070HA X X X X X X X Engine Driven Pumps: Discharge Size 2", 3", and 4" Strainer Wheel Kit Lifting Bail 2" Hose Kit NPT 2" Hose Kit Quick 2" Dis. Hose 2" Dis. Hose 2" Suc. Hose 2" Suc. Hose NPT 50' Quick 50' NPT ' Quick ' 2" Quick Disconnect 'A' 3" Hose Kit NPT 3" Hose kit Quick PGWK-0X PGLB-1X XHK2RNPT XHK2RQC XXHS2D XHD2QC50 XXHS2S XHS2QC G0-A-AL XHK3RNPT XHK3RQC Wheel kit ONLY Lifting Bail ONLY MODEL TE3-50HA Z047 X X X X X X X X X TE3-80HA Z048 X X X X TE2-100HA Z055 X X EPT3-50HA Z049 X X X X X X X X X EPT3-80HA Z050 X X X X EPT3-100HA Z051 X X TD(E)5-0 Included X X X X X X X TD(E)5-300 Included X X Engine Driven Pumps: Discharge Size 2", 3", and 4" (Continued) 3" Dis. Hose 3" Dis. Hose NPT 50' Quick 50' 3" Suc. Hose 3" Suc. Hose NPT ' Quick ' 3" Quick Disconnect 'A' 4" Hose Kit NPT 4" Hose kit Quick 4" Dis. Hose 4" Dis. Hose 4" Suc. Hose NPT 50' Quick 50' NPT ' 4" Suc. Hose Quick ' 4" Quick Disconnect 'A' XXHS3D XHD3QC50 XXHS3S XHS3QC G300-A-AL XHK4RNPT XHK4RQC XXHS4D XHD4QC50 XXHS4S XHS4QC G400-A-AL MODEL TE3-50HA TE3-80HA X X X X X TE2-100HA X X X X X X X EPT3-50HA EPT3-80HA X X X X X EPT3-100HA X X X X X X X TD(E)5-0 TD(E)5-300 X X X X X Portable Generators Wheel Kit PGWK-0X Lifting Bail PGLB-1X MODEL TPG4-3000HDX TPG4-4500HDX TPG4-6000HDX TPG4-7000HDX TPG4-7000HDXE Wheel kit ONLY X X X X X Lifting Bail ONLY X X X X

32 SUPERIOR DESIGN & TECHNOLOGY Anti-Wicking Cable Entrance: Maximum protection against water incursion through the cable entry. Molded Cable Boot or Cable Protection Tube - extends cable bending radius, prevents abrading, and reduces fatigue. Cable Gland - provides 360 degree compression of cable boot, protection tube or cable bush for a water tight fit. Anti-Wicking Block - window cuts on conductor insulation expose strands to molded rubber or epoxy to prove water wicking through the strands and entering the motor providing protection even if the cable insulation is cut. Circle Thermal Protector (CTP) - for pumps with 1-10HP : 3-Pole protector connects to each winding of the motor and reacts to excessive heat and amperage. Automatic reset at safe temperature to restart the motor. No motor protection circuit required in starter or control panel. V-Ring: V-Ring is mounted at the top of the impeller and is brought in close contact to the bottom of the mechanical seal by the internal pressure of the pump casing. This V-Ring acts as a dust seal to prevent fine abrasive particles in the pumping fluid from reaching the mechanical seal. High-Performance Motor: Dry type, squirrel-cage, induction motor, housed in a watertight casing, conforms to either insulation class B or E, or F. In both of these classes, all standard pumps can be used in ambient temperature up to 104F (40C). Dual Inside, Silicon Carbide Mechanical Seals: Isolation of mechanical seals in an oil chamber provides a clean, non-corrosive and abrasion free lubricating environment to prevent spring failure due to corrosion or abrasion and bottom seal failure due to loss of cooling during dry-run conditions. Oil Lifter (Patented): Tsurumi s exclusive Oil Lifter encloses the mechanical seal and uses the centrifugal force generated by the rotating shaft and seal to pump oil to the upper seal faces. Upper and lower seal faces are positively lubricated even when extremely low oil levels exist, as experienced after long periods of extended operation. Oil Flow AIR OIL ROTATION Oil Flow mseinc.net 3801 N. Highway Drive Tucson, Arizona info@mseinc.net