B. OTHER SUBMERSIBLE DEWATERING PUMPS

Transcription

1 SELECTION GUIDE I & O MANUALS. OTHER SUMERSILE DEWATERING PUMPS PUMP SERIES: SED.5HP, 1750RPM, 2 NPT 70.7HP, 120 Volt, 3450RPM 71.7HP, 240 Volt, 3450RPM HP, 120 Volt, 3450RPM HP, 240 Volt, 3450RPM WARNING: CANCER AND REPRODUCTIVE HARM - A 8/18

2 This page intentionally left blank

3 Series SED 2" NPT Female Discharge DISCHARGE...2 NPT, Female, Vertical LIQUID TEMPERATURE 104 F (40 C) VOLUTE... Cast Iron ASTM A-48, Class 30 MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Cast Iron ASTM A-48, Class 30 IMPELLER: Design... 2 Vane, Open, With Pump Out Vanes on ack Side. Dynamically alanced ISO G6.3 Material... Cast Iron ASTM A-48, Class 30 SHAFT Stainless Steel SQUARE RINGS... una-n HARDWARE Series Stainless Steel PAINT... Air Dry Enamel. SEAL: Design... Single Mechanical, Oil Filled Reservoir, Secondary Exclusion Seal Material... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - una-n Hardware -300 Series Stainless CORD ENTRY...30 ft. (9m) Std. Cord w/plug on Single Phase. Quick connect custom molded for sealing and strain relief SPEED RPM (Nominal) UPPER EARING: Design... Single Row, Oil Lubricated Load... Radial LOWER EARING: Design... Single Row, all, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA L - Single Phase, NEMA - Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction Insulation... Class SINGLE PHASE V, 230V. Permanent Split Capacitor (PSC). Includes Overload Protection in Motor. THREE PHASE... Tri Voltage /460; Requires Overload Protection to be Included in control panel. STRAINER... Cast, Ductile Iron LIFTING HANDLE... Stainless Steel MAX SPERICAL SOLID SIZE...⅝" Series: DESCRIPTION: SED.50HP, 1750RPM, 60Hz OPTIONAL EQUIPMENT...Seal Material, Additional Cord Length, Starter. See accessory section for additional information. WARRANTY INVALID IF CORRECT CONTROL IS NOT USED AT ALL TIMES. Portable Electric Submersible Pumps are compact, lightweight units. No priming, suction hose or foot valves are required. efore pumping fl uids other than water consult the factory, giving fl uid, fl uid temperature, specifi c gravity, viscosity, capacity in USGPM and total head and/ or pressure requirements, including friction loss through discharge line, fi ttings, valves, etc. C CSA 108 UL 778 LR16567 US WARNING: CANCER AND REPRODUCTIVE HARM /18

4 Series SED 2" NPT Female Discharge inches (mm) MODEL NO PART NO HP VOLT/Ph Hz RPM (Nom) NEMA START CODE FULL LOAD AMPS LOCKED ROTOR AMPS CORD SIZE CORD TYPE SED / F /3C SJTOW SED / J /3C SOW SED / H / L 3.2 / / /4C SOW SED / K /4C SOW IMPORTANT! 1.) PUMP MAY E OPERATED DRY FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS. 2.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST E INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 2 3/14

5 Series SED Performance Curve.5HP, 1750RPM, 60Hz Testing is performed with water, specifi c gravity 68º (20ºC), other fluids may vary performance 3 8/12

6 This page intentionally left blank 4

7 Series 70, 71, 125, 126 2" NPT Male Discharge DISCHARGE...2 NPT, Male, Vertical LIQUID TEMPERATURE F (40 C) MOTOR SHELL...Stainless Steel VOLUTE...Non-Metallic IMPELLER...Non-Merallic SHAFT Stainless Steel HARDWARE Series Stainless Steel SEAL: Material: Design...Double Mechanical, Oil Filled Reservoir Stationary Face...Silicon/Carbide, Pump End Ceramic, Motor End Rotating Face...Carbon Elastomer...una-N Hardware Series Stainless CORD ENTRY...50 ft. (15m) Cord with plug on 120 Volt Models. Molded for strain relief and compression seal MOTOR: Design...NEMA Design L - Single Phase. Completely Air-Filled, Squirrel Cage Induction SINGLE PHASE...Capacitor Start and Run. Includes Overload Protection in Motor STRAINER...25" (6mm) Openings, Non-Metallic, Rubberized LIFTING HANDLE...Non-Metallic LIFTING ROPE...3/8" (9.7mm) Polypropylene, 25 ft. (7.6m) PUMP WEIGHT 70 & lbs. / kg 125 & lbs. / kg Series: 70, 71, 125, & 1.25HP, 3450RPM, 60Hz DESCRIPTION: These pumps are compact, lightweight units and highly portable. Designed specifically for use by Contractors and Utility service personnel. efore pumping fluids other than water consult the factory, giving fluid, fluid temperature, specific gravity, viscosity, capacity in USGPM and total head and/or pressure requirements, including friction loss through discharge line, fittings, valves, etc. C CSA 108 UL 778 LR16567 US WARNING: CANCER AND REPRODUCTIVE HARM /18

8 Series 70, 71, 125, 126 2" NPT Male Discharge inches (mm) Plug on 120 Volt Only MODEL NO PART NO A DIM inch (mm) HP VOLT/PH Hz RPM (Nom) FULL LOAD AMPS PUMP WEIGHT (451) / lbs (13.6kg) (451) / lbs (13.6kg) (471) / lbs (15.9kg) (471) / lbs (15.9kg) Pump rated for operation at ± 10% voltage at motor. IMPORTANT! 1.) PUMP MAY E OPERATED DRY FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS. 2.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST E INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 6 3/14

9 Series 70, 71, 125, 126 Performance Curve 0.7 & 1.25HP, 3450RPM, 60Hz inches (mm) Testing is performed with water, specifi c gravity 68º (20ºC), other fluids may vary performance 7 7/05

10 This page intentionally left blank 8