Submersible motors. Submersible motors for well diameters from 150 mm (6 inches)
|
|
- Godwin George
- 5 years ago
- Views:
Transcription
1 Submersible motors for well diameters from mm (6 inches) pplications The oddesse submersible motors of the series are designed to drive submersible pumps. They are also applicable for other submersible machines and offshore operation. Design The oddesse submersible motor is a three-phase asynchronous motor with a short circuit rotor. It is designed as a wet-running motor with a watertight insulated winding. ll motors are rewindable. The motor connection for 6- and 8-inch motors are according to NEM-standard, 10- and 12-inch motors are according to international standards. The bearings are lubricated by the motor filling. It is a mixture of glycerine and water. Glycerine is biodegradable and secures the anti freeze protection up to -25 C. If necessary, it can be changed with pure drinking water. xial down thrusts will be absorbed by the axial thrust bearing with individual tilting pads. Motors are encapsulated by a high quality mechanical seal. reliable balance system grant the pressure compensation between motor and its environment. The motors are completed with pressure-water tide cable. They are inside earthed. Construction complies with VDE-regulations and the motors are conform to the EC declaration of conformity as defined by machinery directive 2006/42/EEC. Motors are usable in horizontal and diagonal position depending of the nominal power. oddesse motors are working electrical clock- and anticlockwise. high efficiency guarantees lowest operating costs. For all the motors oddesse hold a detailed supply of control and monitoring equipment available. Operating data Nominal power: up to 400 kw Voltage: up to 1000 V Kind of currency: ~ Frequency : 50 Hz and 60 Hz Degree of protection: IP 68 mbient temperature: up to 0 C (50 C with XLPE/P-wire, higher temperatures on request) Switching frequency: max. 20 / h (12 max. 10 / h) Nominal speed: /min and 460 1/min Special design (on request) higher temperatures other quality of pumped medium, for example sea water use chemically polluted liquids other materials suction jacket temperature monitoring with PTC / Pt100 including reporting device microprocessor controlled motor monitoring Frequency transformer operation Every oddesse motor is usable for frequency transformer operations. Following items should be considered: the frequency transformer must be conform to the nominal currency of the submersible motor, the maximal working range from 0 Hz up to 60 Hz, corresponding speed from up to.460 1/min, the using of a sine-wave generator protect against high voltage peaks the minimum rate of flow must be 10 % of the nominal rate of flow of the pump. Soft starter operation Soft starters are very qualified to start a submersible motor. It grants: reducing of starting current avoidance of water hammer while starting causing switch off of the pump. oddesse Pumpen- und Motorenfabrik GmbH m Pappelwald 12 D-987 Oschersleben - Made in Germany - Phone: +49 (0) Fax: +49 (0) info@oddesse.de 02_006en/1 s4-9
2 Material of construction Submersible motor 6.4, 8.4, 10.5, 12.4 ccording to DIN design components G-version (GGG 40) C-version (ISI 04) X-version (ISI 16) Y-version (ISI 904L) shaft motor flange motor jacket radial bearing thrust bearing screws, nuts and bolts mechanical seal grey cast iron GGG40 / stainless steel / 1.40 carbon / ceramic carbon carbon stainless steel SiC / SiC optional: SiC / SiC available for all motors stainless steel ccording to ISI design components G-version (GGG40) C-version (ISI 04) X-version (ISI 16) Y-version (ISI 904L) shaft motor flange motor jacket radial bearing thrust bearing screws, nuts and bolts mechanical seal grey cast iron ISI 04 ISI 04L stainless steel 2 ISI 04 / 05 carbon / ceramic ISI 04 ISI 16Ti ISI 16Ti carbon carbon stainless steel 4 ISI 16 duplex steel SiC / SiC optional: SiC / SiC available for all motors ISI 904L ISI 904L stainless steel 4 ISI 904L oddesse reserve the right to employ construction materials following German (DIN) standard oddesse Pumpen- und Motorenfabrik GmbH m Pappelwald 12 D-987 Oschersleben - Made in Germany - Phone: +49 (0) Fax: +49 (0) info@oddesse.de 02_006en/2 s4-9
3 ø127h6 ø42.8s ø20 ø F2 0 ø F1 ø240 L Hz ~ S.F. Power P Length l Weight m kw HP mm inch kg lbs Hz ~ S.F. Power P Length l Weight m kw HP mm inch kg lbs Main dimensions [mm] F1 Downthrust capacity: F2 Upthrust capacity: Delivery voltages: V 60 kn / 0 lbs 1.4 kn / 0 lbs oddesse Pumpen- und Motorenfabrik GmbH m Pappelwald 12 D-987 Oschersleben - Made in Germany - Phone: +49 (0) Fax: +49 (0) info@oddesse.de mo10501en/1 s4-1
4 V, 50 Hz ~ S.F. Direct starting kw HP Ia/ η 2/4 /4 4/ /4 /4 4/ Mk/Mn n 1/min rd rd rd rd rd 1 70* V, 60 Hz ~ S.F. Direct starting kw HP Ia/ η 2/4 /4 4/ /4 /4 4/ Mk/Mn n 1/min rd rd rd rd * rd 1 70* * open switching Ia/ η Rated output Rated current Starting current / rated current Efficiency Mk/Mn n Power factor Starting torque / rated torque Breakdown torque / rated torque Rated speed Cable length Degree of protection Tolerances Voltage tolerances Star-delta-version Switch frequency mbient temperature Horizontal use Grounding 7 m IP68 (DIN EN6004-5) DIN VDE 050 / IEC 4 ± 10 % (DIN IEC 8) Ia/ 0., 0. max. 10/h max. 0 C, cooling flow min. 0.5 m/s up to 10 kw according IEC 4-1 Special design on request oddesse Pumpen- und Motorenfabrik GmbH m Pappelwald 12 D-987 Oschersleben - Made in Germany - Phone: +49 (0) Fax: +49 (0) info@oddesse.de mo10501en/2 s4-1
5 80 V kw HP rd rd rd rd * rd 1 70* Submersible motors Hz ~ S.F. Direct starting 415 V 500 V rd rd rd rd rd rd rd rd * 40 rd V rd 1 5 rd 1 70 rd V 690 V 1000 V kw HP rd 1 5 rd 1 5 rd rd 1 5 rd rd Hz ~ S.F. Direct starting 400 V kw HP rd rd rd rd * 415 V 440 V rd rd rd rd rd rd 1 95 rd * 84 6 * V rd 1 5 rd 1 70 rd 1 70 rd 1 95 rd V 690 V 1000 V kw HP rd 1 5 rd 1 5 rd rd 1 5 rd rd 1 5 * open switching oddesse Pumpen- und Motorenfabrik GmbH m Pappelwald 12 D-987 Oschersleben - Made in Germany - Phone: +49 (0) Fax: +49 (0) info@oddesse.de mo10501en/ s4-1
Submersible motors. Submersible motors for well diameters from 150 mm (6 inches)
Submersible motors for well diameters from 50 mm (6 inches) pplications The oddesse submersible motors of the series are designed to drive submersible pumps. They are also applicable for other submersible
More informationSUBMERSIBLE ELECTRIC ECTRIC MOTOR KM6 6
SUBMERSIBLE ELECTRIC ECTRIC 60 MOTOR KM6 6 6-inch Water Cooled Series 6 Borehole Submersible Motors KM6 2 60 Poles KOMAX (Private) Limited, an ISO 900:205 certified company, has the pride to say that it
More informationMVSS. Technical features
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V 60Hz and 200-240V, 50Hz; suitable for use with an inverter from 20Hz to the base frequency with constant torque
More informationStainless Steel Water Filled Submersible Motors
Stainless Steel Water Filled Submersible Motors Standard Features 6-7 & 8 Sizes Rewindable Water Cooled - Hz / - V NEMA Mounting Dimensions Stainless Steel Splined Shaft Filter Check Valve Same electrical
More informationSP A, SP. Submersible pumps Submersible motors Accessories. 50 Hz
SP A, SP Submersible motors Accessories For raw water supply, irrigation systems, groundwater lowering, pressure boosting and various industrial applications. 5 Hz TM 7318 2298 Contents General data Performance
More informationGRUNDFOS DATA BOOKLET SP A, SP. Submersible pumps, motors and accessories 50 Hz
GRUNDFOS DATA BOOKLET SP A, SP, motors and accessories 5 Hz Contents General data Performance range Page 3 Applications Page 4 Type key Page 4 Pumped liquids Page 4 Operating conditions Page 4 Curve conditions
More informationMVSI-TS. Split covers. Technical features
MVSI-TS Split covers The MVSI-TS series, obtained directly from the MVSI series, is characterized by the split weight covers. The weight cover is divided into two halves that can be removed in a radial
More informationGRUNDFOS DATA BOOKLET SP A, SP. Submersible pumps, motors and accessories 50 Hz
GRUNDFOS DATA BOOKLET SP A, SP, motors and accessories 5 Hz Contents General data Performance range 3 Applications 4 Type key 4 Pumped liquids 4 Curve conditions 4 Pump range 5 Motor range 5 Motor protection
More informationSeries description: Wilo-Sub TWI 6-..-B
Series description: Wilo-Sub TWI 6-..-B Design Submersible pump, multistage Application For water and potable water supply from boreholes and rainwater storage tanks Process water supply For municipal
More informationContents. General Data. Submersible Motors
Contents General Data Performance Range Page 2 Applications Page Type Key Page Pumped Liquids Page Operating Conditions Page Curve Conditions Page Pump Range Page Motor Range Page s Features and Benefits
More informationSealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket. our. contribution for
Sealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket our contribution for environmental protection GENERAL DICKOW-pumps of series NMR are sealless centrifugal
More informationMTF. Technical features
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V, 60Hz and 200-240V, 50Hz ( types are supplied without capacitor); suitable for use with an inverter from 20Hz
More informationEnd Suction Range MARCH 2018
End Suction Range MARCH 2018 INDEX QB Peripheral Vane Pump... 4 Performance Data... 5 CPM Single Stage Pumps... 6 2CPM Twin Stage Pump... 10 Performance Data... 11 JSWM Self-Priming Jet Pump... 12 Performance
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationChemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant
Chemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant Highly corrosionresistant pumps for absolute aggressive liquids and dangerous liquids. Energy-efficient pumps and chemical pumps Sustainable
More informationJUNG PUMPEN compli 100 MC Sewage lifting stations
Application The sewage lifting stations compli 100, compli 500 and compli 1000 with MultiCut cutting system are uses especially for disposal in special objects, such as weekend cottages, houseboats, toilets
More informationProtection against mechanical impacts IK 08 according to IEC 68, EN Insulation class Class F (155 C), class H (180 C) on request.
MVSI The MVSI series represents the line of reference products for manufacturer s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market,
More informationXS8 Series. Technical Guide Submersible electropumps and motors for 8 wells
XS8 Series Technical Guide Submersible electropumps and motors for 8 wells XS8 Series t Index Sectors of application... Technical characteristics... Table of materials and identification data... 6 Hydraulic
More informationJUNG PUMPEN COMPLI 100 MC SEWAGE LIFTING STATIONS
APPLICATION The sewage lifting stations compli 100, compli 500 and compli 1000 with MultiCut cutting system are uses especially for disposal in special objects, such as weekend cottages, houseboats, toilets
More informationGRUNDFOS DATA BOOKLET SP A, SP. Submersible pumps, motors and accessories 50 Hz
GRUNDFOS DATA BOOKLET SP A, SP, motors and accessories 5 Hz Contents General data Performance range 3 Applications 4 Type key 4 Pumped liquids 4 Operating conditions 4 Curve conditions 4 Pump range 5 Motor
More informationDatasheet. Pitch Motor PMSM SP190C8
Pitch Motor PMSM SP190C8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260007a 1 Application The Pitch motor
More informationTechnical features Certifications
The MVSI series represents the line of reference products for manufacturer s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market, with
More informationDatasheet. Pitch Motor PMSM SP190F8
Pitch Motor PMSM SP190F8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260009c 1 Application The Pitch motor
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
More informationSide channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
More informationMTF-E. Technical features
Technical features Power supply Threephase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PM inverter from 20Hz to the base frequency with constant torque load profile. Polarity 2 and
More informationSF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
More informationRUSCH - PUMPEN FABRIK GMBH. Standard Pumps /2010 PUMPS OVERVIEW AND DATES FOR ALL STANDARD-PUMPS OF FOLLOWING DESIGN: CENTRIFUGAL PUMPS:
R U S C H RUSCH - PUMPEN FABRIK GMBH Standard Pumps - 2009/2010 PUMPS OVERVIEW AND DATES FOR ALL STANDARD-PUMPS OF FOLLOWING DESIGN: CENTRIFUGAL PUMPS: SCREW PUMP: TYPE - R MONOBLOCK DESIGN TYPE - R BEARING
More informationPleuger Electrical Submersible Pumps and Water-Filled Motors
Electrical Submersible Pumps and Water-Filled Motors Experience In Motion Experience In Motion Trusted Supplier of Choice for Water Resources For more than a century and a half, Flowserve has been in the
More informationJUNG PUMPEN COMPLI 1500 / 2500 SEWAGE LIFTING STATIONS
APPLICATION The compli 1500 and 2500 tank systems have been designed for large industrial and communal wastewater volumes as well as for the connection of streets or other community effluent systems. In
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSION PUMP TABLE 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE R10 205 PERFORMANCE CURVE R13 206 PERFORMANCE CURVE S25 207 PERFORMANCE CURVE S32 208 PERFORMANCE
More informationSealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN / ISO 2858 Type NMWR / NMWB / NMW. our. contribution for
Sealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN 22858 / ISO 2858 Type NMWR / NMWB / NMW our contribution for environmental protection General DICKOW pumps of series NMWR / NMWB / NMW
More informationData sheet: Wilo-CronoNorm-NL 150/315-37/4
Data sheet: Wilo-CronoNorm-NL 15/315-37/4 Pump curves 4 8 1 16 4Q/US gpm H/m Wilo-CronoNorm-NL 15/315 H/ft 145 1/min 14 5 Hz 4 55% 6% 65% 7% 75% 78% 8% 1 8% 35 Eff. 84,8% 83,9% 3 8% 1 8% 8,1% 78% 8,8%
More informationSF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
More informationMODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................
More informationMVSI. Technical features
MVSI The MVSI series represents the line of reference products for manufacturer s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market,
More informationGeneral Specifications. Cooling Method 3M series are IC 411 Standard. IC 416, IC 418 can be provided Upon request
3M SERIES Three Phases Low Voltage Asynchronous Motors 3M Series Vilma motors are designed and manufactured with high quality materials and workmanship in order to meet demanding and arduous operation
More informationfranklin-electric.eu PRODUCT CATALOG
franklin-electric.eu PRODUCT CATALOG QUALITY AVAILABILITY SERVICE INNOVATION Table of contents 4" Encapsulated Motors PSC... 4-9 PSC NextGen Motor... 10-15 PSC Motor Set... 16-17 2- Wire... 18-23 3- Wire...
More informationDatasheet. Pitch Motor PMSM SP260B8
Pitch Motor PMSM SP260B8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260012a 1 Application The Pitch motor
More informationGeneral Catalog. A New Vision for Quality Pumps. General Catalog
General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve
More informationDAP REWINDABLE SUBMERSIBLE MOTORS
ENGINEERING FLOW SOLUTIONS DAP REWINDABLE SUBMERSIBLE MOTORS REWINDABLE SUBMERSIBLE MOTORS DAP SERIES DАP is a new series of asynchronous submersible rewindable motors designed and manufactured by Livnynasos
More informationSubmersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet
Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationAsynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors Series R2, Frame 63 355 Introduction KHM R2 series cast iron motors are totally enclosed fan cooled, 3 phase, and squirrel cage induction
More informationBuilt-in motors. Contents. Product description 7/2 Overview of technical data 7/3
Built-in motors Contents Product description 7/2 Overview of technical data 7/3 Motor selection data Series W4.R (corresponds to Efficiency IE3) 7/4 Series WE.R (corresponds to High Efficiency IE2) 7/6
More informationELECTRIC MOTORS. Selection. Starting torque and nominal torque
SELECTION PROCEDURE The output powers published overleaf are based upon continuous maximum rating conditions. Therefore design factors for above average running periods do not normally affect the selection.these
More informationJUNG PUMPEN MULTICUT SEWAGE PUMPS
APPLICATION Centrifugal submersible sewage pumps fitted with the MultiCut cutting system are used as stationary appliances for backpressure protection of detached houses. They are suitable for pumping
More informationAn ISO 9001, ISO & OHSAS Company
An ISO 900, ISO 0 & OHSAS 0 Company C.R.I. MOTORS T H E B E G I N N I N G of C.R.I., way back in 9, was a resolute attempt to produce a few irrigation equipments using the limited facilities of an in-house
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
More informationour contribution for Sealless Magnetic Coupled Multistage Centrifugal Pumps Type HZM / HZMR / HZMB environmental protection
Sealless Magnetic Coupled Multistage Centrifugal Pumps Type HZM / HZMR / HZMB our contribution for environmental protection General DICKOW-pumps of series HZM are sealless multistage horizontal centrifugal
More informationANNEX No 1. C 17/05/2006 SGA112B TERMINAL BOX ARRANGEMENT Ex e, Ex na &Ex td V (OPTION 2)
ANNEX No 1 DRAWINGS Drawing No. Drawing Description Revision Date Ex e, na and td SGA100A General Arrangement for SGA 71 frame motor C 16/06/2006 SGA101A General Arrangement for SGA 80-132 frame motor
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
More informationLenze. Drives with worm gearboxes 52.
6 887 Lenze Drives with worm gearboxes 5. Lenze Drive Systems GmbH, Postfach 0 5, D-76 Hameln, Site: Groß Berkel, Hans-Lenze-Straße, D-855 Aerzen, Phone ++9 (0) 55 8-0, Telefax ++9 (0) 55 8- E-Mail: Lenze@Lenze.de
More informationSeries description: Wilo-Drain STS 40
Series description: Wilo-Drain STS H/m 12 Wilo-Drain STS 1 8 6 2 2 6 8 1 12 1 16 Q/m³/h Design Submersible sewage pump Application Pumping of heavily contaminated fluids for: Domestic and site drainage
More informationMWCP- MRCP-MRSP Rewindable Submersible Motors
MWCP- MRCP-MRSP 6-8 -10 Rewindable Submersible Motors INSTALLATION AND OPERATING INSTRUCTIONS MWCP Water cooled motors with encapsulated resin filled stator. Coupling dimensions and flange according to
More informationSERVO MOTORS BRUSHLESS SERVO MOTORS ATEX ZONE 2-22 OPERATING INSTRUCTIONS 2016
SERVO MOTORS BRUSHLESS SERVO MOTORS ATEX ZONE 2-22 OPERATING INSTRUCTIONS 2016 3010/16 en Ed.10.2016 Read these Operating Instructions before performing any transportation, installation, commissioning,
More informationSERVO MOTORS BRUSHLESS SERVO MOTORS OPERATING INSTRUCTIONS 2016
SERVO MOTORS BRUSHLESS SERVO MOTORS OPERATING INSTRUCTIONS 2016 3009/16 en Ed.02.2016 Read these Operating Instructions before performing any transportation, installation, commissioning, maintenance or
More informationLowara. 8 Submersible Electric Pumps. 6Z855, 6Z875 6Z895, 6Z8125 Series. 60 Hz
8 Submersible Electric Pumps 6Z855, 6Z875 6Z895, 6Z8125 Series 60 Hz 6Z855, 6Z875, 6Z895, 6Z8125 SERIES HYDRAULIC PERFORMANCE RANGE AT 60 Hz PRINT 10-2006 2 CONTENTS 6Z8 Series Specifications...5 Table
More informationLiquid ring vacuum pumps with magnetic coupling
Liquid ring vacuum pumps with magnetic coupling LPH 75320, LPH 75330, LPH 75340 Pressure range: Suction volume flow: 33 to 1013 mbar 485 to 1615 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum
More informationAsynchronous generators
Asynchronous generators Contents Product description 13/2 Overview of technical data 13/3 Motor selection data Series G4.R on the basis of Premium Efficiency IE3 13/4 Series GE.R on the basis of High Efficiency
More information- CONSTRUCTIONS 300 SECTIONAL VIEW (4N1 4N2 4N4) 300 SECTIONAL VIEW (4N7 4N10 4N15) 301 SECTIONAL VIEW TABLE 302 ITEM QUANTITY FOR MODEL 303
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 TYPE KEY 203 PERFORMANCE CHART 4N1 204 PERFORMANCE CHART 4N2 205 PERFORMANCE CHART 4N4 206 PERFORMANCE CHART 4N7
More informationSubmersible Motors Product Overview
Product Overview Table of contents 4" Encapsulated Motors PSC... 2 2- wire... 3 3- wire... 4 3 Phase... 5 6" Encapsulated Motors Standard... 6 HighTemp 90 C... 7 6" Rewindable Motors Standard... 8 8"
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
More informationour contribution for environmental protection Sealless magnetic coupled centrifugal pumps acc. to EN Type NML / NMB
Sealless magnetic coupled centrifugal pumps acc. to EN 22858 our contribution for environmental protection Type NML / NMB General Magnetic coupled DICKOW-pumps of the series NM are sealless pumps. The
More informationLPCD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 204 PERFORMANCE CURVE 50 205 PERFORMANCE CURVE 65 207 PERFORMANCE CURVE 80 208 PERFORMANCE
More informationPleuger PMM. High-Efficiency Submersible Motor With Permanent Magnet Technology for Electrical Submersible Pumps (ESP) Experience In Motion
Pleuger PMM High-Efficiency Submersible Motor With Permanent Magnet Technology for Electrical Submersible Pumps (ESP) Experience In Motion Pump supplier to the world Flowserve is the driving force in the
More informationPUMP. Submersible Sewage Pumps Type DSC4 FEATURES/BENEFITS
PUMP Submersible Sewage Pumps Type EBARA submersible pump type is constructed of rugged cast iron with heavy-duty motor suitable for municipal water and wastewater, sewage and flood control applications.
More informationGY/UY GRINDER / VORTEX SERIES
www.tsurumi.eu GY/UY GRINDER / VORTEX SERIES Selection Table Motor Output (kw) GY 2" 50mm GYMK 2" 50mm 0.9 1.1 1.5 1.6 1.8 1.9 3.1 3.7 4.4 6.4 9.5 Motor Output (kw) 4" 100mm UY 6" 150mm 4" 100mm UYMK 6"
More informationKeeping Industry Turning
Keeping Industry Turning W luminium motors Frame sizes 3 to 01E issue 3 Specification and Introduction Specification Specification Frame sizes Enclosure Mounting option Terminal box position Voltage Frequency
More informationStandard cast iron Motor
Standard cast iron Motor Frame size 80 to 355 Série 1L Phase 3 Voltage 265/460V 60Hz Types of mounting B3 V9 B5 B14 B6 B9 B3 / B5 V5 B3 / B14 B15 V1 B7 V18 V1 / V5 V8 V18 / V5 V6 B8 V3 / V6 V3 V19 V19
More informationData sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
More informationChemical Motor Pump Unit BN
MB / General Pump BN-type motor pump units are normal-priming, singlestage, plastic centrifugal pumps in block design with horizontal axis. Their dimensions and flow rates mainly correspond to DIN/EN.
More informationJUNG PUMPEN US SUBMERSIBLE DRAINAGE PUMPS
APPLICATION The centrifugal submersible drainage pumps US 62-251 can be used wherever sewage water with solids up to 10 mm particle size occurs, e.g. in collecting sumps for ground water, or in permanent
More informationInstallation and Operational Instructions for ROBA-stop -tacho brake Type 83_.41_._ and ROBA-stop -tacho peak load brake Type _.
Please read the Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to brake failure, resulting in damage to other parts. Contents: Page
More informationGRUNDFOS PRODUCT GUIDE. Submersible pumps, motors, and accessories 60 Hz
GRUNDFOS PRODUCT GUIDE Submersible pumps, motors, and accessories 6 z Table of contents 1. Product introduction 3 Introduction 3 Applications 3 Features and benefits 3 Identification 8 2. Product overview
More informationGeneral Purpose Incremental Encoder
Model Number Features Up to 5000 ppr Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description Compatibility says it all for this incremental
More informationSWE SERIES (IE3) WONDER ELECTRIC MOTOR (S) PTE LTD. Energy Saving Low Noise Environmental Friendly IEC Dimension Low Vibration European Design
RANGE OF PRODUCTS Three phase asynchronous squirrel-cage & slip ring induction motors Three phase asynchronous self-braking motors Hollow shaft rotor motors Cooling tower motors High motors, (IE2) (IE3)
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More informationHTM Circulation Pumps acc. to DIN EN 733 Type NKLs
HTM Circulation Pumps acc. to DIN EN 733 Type NKLs General The DICKOW standard HTM pumps, series NKLs according to EN 733, are designed as centrifugal pumps of light duty for handling heat transfer media.
More informationInstallation and Operational Instructions for ROBATIC -clutch Types _.0 and _.0 Sizes 3 7
Please read these Installation and Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunction or to clutch failure, resulting in damage to other
More informationSEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive
SEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive SEMA-S SEMA-L with reference to DIN EN 734 SEMA-Z with reference to DIN EN 734 SEMA-Block in closed-coupled design for extremely low
More informationSE M.C.N.51D
GRUNDFOS DATA BOOKLET SE1.110.200.200.4.52M.C.N.51D Grundfos pump 98179813 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/seslfam/98179813/se1-110-200-200-4-52m-c-n-51d.html
More informationSMN Double-Suction Axially Split Pump
SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
More informationSJ Stainless steel submersible borehole pump
SJ Series PRESENTATION Hydroo Pump Industries SL is an enterprise specialised in the research, development and large-scale production of Stainless Steel centrifugal pumps. We have a vertical integration
More informationVane pumps, direct controlled Type PV7...A
Vane pumps, direct controlled Type PV7...A Nominal sizes 1 to 25 eries 1X Maximum operating pressure 1 bar Displacements from 1 to 25 cm 3 H/A 617/95 Type PV7-1X/..RA1MA-... H/A/D 56/97 Typ MPU1-V71-9L/...
More informationAxial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction RITZ ( ) ASE axial split case pumps has been developed for wide range of application benefiting both the industrial users and the municipality.
More informationSÜDMO NEW SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS
SÜDMO SP SERIES - NEW HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS SÜDMO SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD
More informationData sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
More informationContent. Page 4 7. Technical Information Electrical. Models and Applications Technical Information Potentials for energy savings
Content Technical Information Electrical Page 4 7 Models and pplications Technical Information Potentials for energy savings 8 0 High Pressure Pumps BFS, FFS / 50 Hz BFS2, FFS2 / 50 Hz High Pressure Pumps
More informationFranklin Electric Europa GmbH 6" Encapsulated Standard Motors Product Information and Service
Franklin Electric Europa GmbH 6" Encapsulated Standard s Product Information and Service QUALITY IN THE WELL QUALITY AVAILABILITY SERVICE INNOVATION Product Information and Service Table of contents 6"
More informationGRUNDFOS DATA BOOKLET SP A, SP. Submersible pumps, motors and accessories. 50 Hz
GRUNDFOS DATA BOOKLET SP A, SP Submersible pumps, motors and accessories 5 Hz SP A, SP Table of contents 1. General description 3 Performance range 3 Minimum efficiency index 4 Type key 4 Applications
More informationNK /310A2F1AE-SBAQE
GRUNDFOS DATA BOOKLET NK15-315/31A2F1AE-SBAQE Grundfos Pump 98318632 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nkbasis/98318632/nk-15-315-31-a2-f-a-e-baqe.html
More informationThese operating instructions apply for: NCX 380 NCZ 300 NCX 480 NCZ 370 NCX 580 L NCZ 480 NCX 660 K NCZ 560 NCZ 660 NCZ 800
Original instructions Operating Instructions for May 2010 Electric Internal Vibrators BA No. 1092E Series NCX and NCZ These operating instructions apply for: NCX 380 NCZ 300 NCX 480 NCZ 370 NCX 580 L NCZ
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationLPC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 32 205 40 206 50 210 65 213 80 216 100 218 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 302 - DIMENSIONS
More informationInstallation and Operational Instructions for ROBATIC -clutch Type and Type Sizes 3 9
Please read the Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationMMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
More informationData sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
More information