Chemical Motor Pump Unit BN

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Chemical Motor Pump Unit BN"

Transcription

1 MB / General Pump BN-type motor pump units are normal-priming, singlestage, plastic centrifugal pumps in block design with horizontal axis. Their dimensions and flow rates mainly correspond to DIN/EN. The pumps of this series were developed to meet the requirements of the chemical industry and are therefore especially suited to pump pure or solid matter containing, acid or alkaline, low-viscosity liquids. As the materials getting in contact with the pumped medium are physiologically harmless, the pumps can also be used in the food industry. The extended shaft of the drive motors directly carries the impeller. The pump head is flanged to the drive motor using an intermediate piece. Pump head Mechanical seal Drive Pump head, impeller All wetted-end parts are made of high-quality materials such as PP, PVDF, hard carbon, EPDM or FPM elastomers. The external metallic parts are protected against corrosion by a chemically resistant varnish coat. For all pump sizes, closed impellers with relief borings for compensation of the axial thrust are used. The transmission of the torque is form-locking. Position of connections, flanges The suction connection is positioned axially, the pressure flange radially in upward direction. As a standard the suction and pressure connections are fitted with flanges according to DIN /PN. Shaft seals The shafts are sealed by means of maintenance-free mechanical seals. Depending on the operating conditions, internal, single-acting or double-acting versions are used. Double-acting mechanical seals require a sealing liquid. Sliding materials in silicon carbide (SiC), bellows and secondary seals of EPDM or FPM, metallic parts of stainless steel (.7) or Hastelloy C- (.) are standard combinations and cover a large range of applications. The space available in the sealing area allows to use standard seals. Special versions on request. Drive Surface-cooled three-phase motors with extended rotor shaft and reinforced bearing, otherwise according to IEC standard, min-or 9min-, enclosure IP, insulation class F, mounting IM B.

2 MB / Nominal pump capacities according to DIN/EN Pump size Output Output BN... at min- at 9 min- Nominal flow rate Nominal head Nominal flow rate Nominal head [m³/h] [m] [m³/h] [m] Dimensions Pump

3 MB / 3 Pump size Power in kw at Motor L Approx. weight kg (PP) BN... min- 9min- size min- 9min- -3-,, 9S 9 3 -, 9L L ,, 9S 37 37,, 9L L ,+7,+ 3-79// -3-, - 9S -,, 9L, ,+7,+ 3 - /9/9 --, - 9S ,, 9L , - 9S 3 -,, 9L, ,+7,+ 3 - // --, - 9S 3 -,, 9L, ,+7,+ 3-9/9/9 --,, 9L 3 3, ,+7,+ 3-7// --, - 9L -, ,+7,+ 3 - /7/7 --, - 9L -, / , , - 9L -, / ,+7,+ 3-7// --, - 9L 7 -, /

4 MB / Dimensions Pump Pump size BN Flange connection dimensions according to DIN, Part f. PN DN S Inlet DN D Outlet Pump dimensions a h h m m n n w Flanges Flanges according to DIN DN k d z 3 z -hole arrangement z -hole arrangement

5 MB / Mechanical seals General Mechanical seals basically consist of two perfectly plane surfaces. One surface rotates with the shaft, while the other one is stationary. The sealing effect is achieved by the direct contact between the two plance surfaces. The stationary counter-ring is normally fixed in position. The sliding ring is able to move axially and radially in Type BI order to compensate the shaft deflections during operation. This axial mobility enables mechanical seals to be fitted within practicable manufacturing tolerances, the accuracy required being dependent on the design of the seal. Type BQ Single-acting, loaded, internal seal, independent of direction of rotation. Combination of sliding materials in silicon carbide (SiC). Bellows and secondary seals of EPDM and FPM. Metallic parts of stainless steel or Hastelloy C-. Suitable for application with neutral and aggressive media which do not crystallize out and are free from solid matter. Single-acting, loaded, internal seal, independent of direction of rotation, with quenching chamber. The quenching chamber is sealed from the atmosphere by a shaft sealing ring to prevent deposits and/or reduction of the temperature in the area of the mechanical seal. Combination of sliding materials in silicon carbide (SiC). Bellows and secondary seals of EPDM and FPM. Metallic parts of stainless steel or Hastelloy C-. Suitable for application with aggressive media tending to crystallize out. Function of quending: - Prevention of crystallizing rings (air seals) - Absorption of leakage - Cooling of sliding rings - Monitoring of leakage rate - Lubricating film stabilization during vacuum operation

6 MB / Type BD Double-acting, loaded, internal seal, independent fo direction of rotation, arranged back-to-back with sealing chamber. This arrangement is the most usual form of double-acting seals used for difficult, chemically particularly aggressive media. Combination of sliding materials in silicon carbide (SiC). Bellows and secondary seals of EPDM and FPM. Metallic parts of stainless steel. Suitable for application with aggressive and abrasive media. Function of sealing: - Prevention of contact between pumped liquid and atmosphere - Formatin of lubricating film between the sliding rings - Cooling of sliding rings - Monitoring of leakage rate

7 MB / 7 Performance curves The following diagrams show the Q-H curves in dependence of the impeller diameter as well as the power consumption in kw, the effeciency and the NPSH value (only for nominal speed of 9 min-). and efficiency guarantees according to DIN 9. Hyd. hyd. efficiency Wirkungsgrad in % in % Power Leistungsbedarf consumtion in in kw ,,, Power Leistungsbedarf consumption 3 Type BN Motor kw:. Speed: 9 d d d d d d

8 MB / Type BN Motor kw:. Speed: hyd. Hyd. Wirkungsgrad efficiency in % in % Wirkungsgrad Efficiency in m³/h in m³/h d d d d in in m³/h Power Leistungsbedarf consumption Power Leistungsbedarf consumtion in in kw kw,,,,,, in in m³/h m³/h d d

9 MB / 9 Type BN Motor kw: Speed: 9 hyd. Hyd. Wirkungsgrad efficiency in % in % Flow rate in m³/h in m³/h d 7 d d 7 d Power Leistungsbedarf consumtion in in kw kw 3 in in m³/h Leistungsbedarf Power consumption 3 3 m³/h d 7 d

10 MB / Type BN Motor kw:. Speed: hyd. Hyd. Wirkungsgrad efficiency in % in % 3 3 d 7 d d 7 d Power Leistungsbedarf consumtion in in kw kw,,,,,,,, Leistungsbedarf Power consumption in m³/h in m³/h d 7 d

11 MB / Type BN Motor kw: 7. Speed: 9 hyd. Hyd. Wirkungsgrad efficiency in % in % 7 3 Flow rate 3 Flow rate in m³/h in m³/h d d 9 d d 9 Power Leistungsbedarf consumtion in in kw 3 m³/h Leistungsbedarf Power consumption 3 m³/h d d 9

12 MB / Type BN Motor kw:. Speed: Hyd. hyd. Wirkungsgrad efficiency in % in % in in m³/h 3 3 in in m³/h m³/h d d d d Power Leistungsbedarf consumtion in in kw kw,, Leistungsbedarf Power consumption 3 3 in in m³/h d d

13 MB / 3 Type BN - - Motor kw: 3 Speed: 9 Hyd. hyd. Wirkungsgrad efficiency in % in % in in m³/h d d d d Power Leistungsbedarf consumtion in in kw kw 3, 3, 3,,, Power Leistungsbedarf consumption in in m³/h 3 d d

14 MB / Type BN - - Motor kw:. Speed: Meters Förderhöhe of head in mws hyd. Hyd. Wirkungsgrad efficiency in % in % d d d d 3 m³/h Power Leistungsbedarf consumtion in in kw kw Power Leistungsbedarf consumption,,,9,,3 3 in m³/h in m³/h d d

15 MB / Type BN - - Motor kw: 7. Speed: 9 hyd. Hyd. Wirkungsgrad efficiency in % in % m³/h d 7 d d 7 d Power Leistungsbedarf consumtion in in kw kw 3 in in m³/h Power Leistungsbedarf consumption in in m³/h d 7 d

16 MB / Type BN - - Motor kw:. Speed: Hyd. hyd. Wirkungsgrad efficiency in % in % Flow rate d 7 d d 7 d 3 3 Power Leistungsbedarf consumption Power Leistungsbedarf consumtion in kw,, 3 3 d 7 d

17 MB / 7 Type BN - - Motor kw: 7. Speed: 9 hyd. Hyd. Wirkungsgrad efficiency in % in % Power Leistungsbedarf consumtion in in kw Meters Förderhöhe of head in mws 7 3 Flow rate in m³/h in m³/h 3 Leistungsbedarf Power consumption 3 Flow rate in m³/h in m³/h d d 7 d d 7 d d 7

18 MB / Type BN - - Motor kw:. Speed: Hyd. hyd. Wirkungsgrad efficiency in % in % Flow rate 3 3 Wirkungsgrad Efficiency 7 3 d d d d Power Leistungsbedarf consumtion in in kw kw 3 3 in in m³/h Power Leistungsbedarf consumption,, 3 3 in in m³/h d d

19 MB / 9 Typ BN - - Motor kw: 7. Speed: 9 Hyd. hyd. efficiency Wirkungsgrad in % in % d d d d Power Leistungsbedarf consumtion in in kw 3 7 Power Leistungsbedarf consumption in in m³/h d d

20 MB / Type BN - - Motor kw:. Speed: Hyd. hyd. Wirkungsgrad efficiency in % in % Flow rate d d d d 3 3 Power Leistungsbedarf consumtion in in kw Power Leistungsbedarf consumption,,,,,,,, 3 3 in in m³/h d d

21 MB / Type BN - - Motor kw: Speed: 9 Hyd. hyd. Wirkungsgrad efficiency in % in % in in m³/h 3 7 in in m³/h d 7 d d 7 d Power Leistungsbedarf consumtion in in kw Leistungsbedarf Power consumption 3 7 m³/h d 7 d

22 MB / Type BN - - Motor kw: Speed: hyd. Hyd. Wirkungsgrad efficiency in % in % m³/h d 7 d d 7 d 3 3 Power Leistungsbedarf consumtion in in kw Leistungsbedarf Power consumption 3, 3,,, 3 3 in in m³/h d 7 d

23 MB / 3 Type BN - - Motor kw: Speed: 9 hyd. Hyd. Wirkungsgrad efficiency in % in % Flow rate d9 d 7 d9 d m³/h Power Leistungsbedarf consumtion in kw Leistungsbedarf Power consumption 3 7 in in m³/h m³/h d 9 d 7

24 MB / Type BN - - Motor kw: 3 Speed: Hyd. hyd. Wirkungsgrad efficiency in % in % m³/h 3 3 Flow rate in m³/h in m³/h d d 7 d d 7 3 Power Leistungsbedarf consumption Power Leistungsbedarf consumtion in in kw,,, 3 3 d d 7

25 MB / Type BN - - Motor kw: Speed: 9 hyd. Hyd. Wirkungsgrad efficiency in % in % Power Leistungsbedarf consumtion in kw Flow rate Wirkungsgrad Efficiency m³/h in m³/h in m³/h Leistungsbedarf Power consumption Flow rate in in m³/h m³/h d d d d d d

26 MB / Type BN - - Motor kw:. Speed: Hyd. hyd. Wirkungsgrad efficiency in % in % d d 3 d d Flow rate in m³/h in m³/h Power Leistungsbedarf consumption, Power Leistungsbedarf consumtion in kw,,,,, in in m³/h d d 3

27 MB / 7 Type BN - - Motor kw: Speed: 9 Hyd. hyd. Wirkungsgrad efficiency in % in % Flow rate in m³/h in m³/h d 7 d d 7 d Power Leistungsbedarf consumtion in kw in in m³/h m³/h Power Leistungsbedarf consumption in in m³/h d 7 d

28 MB / Type BN - - Motor kw: 3 Speed: Hyd. hyd. Wirkungsgrad efficiency in % in % d 7 d d 7 d Power Leistungsbedarf consumption Power Leistungsbedarf consumtion in kw,,, d 7 d

Vertical Immersion Pump VTP - BBF

Vertical Immersion Pump VTP - BBF MB / General VTP centrifugal pumps in block design (BBF) correspond to the system of two-pipe pumps. Basically these immersion pumps are single-level immersion pumps with vertical axis the main components

More information

Side channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description

Side channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate

More information

Thermoplastic Centrifugal pump, Type NM

Thermoplastic Centrifugal pump, Type NM Thermoplastic Centrifugal pump, Type NM acc. to DIN 24256, EN 22858 and ISO 2858 Size: 32-125 up to 150-400 Capacity Q: up to 450 m 3 / h Head H: up to 100 m Operating temperature t: PE up to + 70 C PP

More information

Side channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description

Side channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155

More information

CR15-10 A-F-A-E-HQQE 11kW 3x400D 50Hz

CR15-10 A-F-A-E-HQQE 11kW 3x400D 50Hz GRUNDFOS DATA BOOKLET CR15-1 A-F-A-E-HQQE 11kW 3x4D 5Hz Grundfos Pump 965191 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/965191/cr-15-1-a-f-a-e-hqqe.html

More information

CRE45-1 A-F-A-E-HQQE 3x HZ

CRE45-1 A-F-A-E-HQQE 3x HZ GRUNDFOS DATA BOOKLET CRE45-1 A-F-A-E-HQQE 3x4 5 HZ Grundfos Pump 96123387 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/cre45/96123387/cre-45-1-a-f-a-e-hqqe.html

More information

CR1-3 A-FGJ-A-E-HQQE 1x220/240 50HZ

CR1-3 A-FGJ-A-E-HQQE 1x220/240 50HZ GRUNDFOS DATA BOOKLET CR1-3 A-FGJ-A-E-HQQE 1x22/24 5HZ Grundfos Pump 96537538 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537538/cr-1-3-a-fgj-a-e-hqqe.html

More information

CR3-19 A-FGJ-A-E-HQQE 3x230/400 50HZ

CR3-19 A-FGJ-A-E-HQQE 3x230/400 50HZ GRUNDFOS DATA BOOKLET CR3-19 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516663 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516663/cr-3-19-a-fgj-a-e-hqqe.html

More information

CR45-5 A-F-A-E-HQQE 3x400/ HZ

CR45-5 A-F-A-E-HQQE 3x400/ HZ GRUNDFOS DATA BOOKLET CR45-5 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 9612285 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9612285/cr-45-5-a-f-a-e-hqqe.html

More information

NJK Series ISO Standard End-Suction Centrifugal Pumps

NJK Series ISO Standard End-Suction Centrifugal Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Armour Type Corrosion Resistant Chemical Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28

More information

CR5-26 A-FGJ-A-E-HQQE 3x400D 50HZ

CR5-26 A-FGJ-A-E-HQQE 3x400D 50HZ GRUNDFOS DATA BOOKLET CR5-26 A-FGJ-A-E-HQQE 3x4D 5HZ Grundfos Pump 96513391 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96513391/cr-5-26-a-fgj-a-e-hqqe.html

More information

CRN20-02 A-FGJ-G-E-HQQE 3x400D 50 HZ

CRN20-02 A-FGJ-G-E-HQQE 3x400D 50 HZ GRUNDFOS DATA BOOKLET CRN2-2 A-FGJ-G-E-HQQE 3x4D 5 HZ Grundfos Pump 965569 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn2/965569/crn-2-2-a-fgj-g-e-hqqe.html

More information

CR1-3 A-A-A-E-HQQE 3x230/400 50HZ

CR1-3 A-A-A-E-HQQE 3x230/400 50HZ GRUNDFOS DATA BOOKLET CR1-3 A-A-A-E-HQQE 3x23/4 5HZ Grundfos Pump 9651617 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651617/cr-1-3-a-a-a-e-hqqe.html

More information

CR1-6 A-A-A-E-HQQE 3x230/400 50HZ

CR1-6 A-A-A-E-HQQE 3x230/400 50HZ GRUNDFOS DATA BOOKLET CR1-6 A-A-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516174 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516174/cr-1-6-a-a-a-e-hqqe.html

More information

CRN45-5 A-F-G-V-HQQV 3x400/ HZ

CRN45-5 A-F-G-V-HQQV 3x400/ HZ GRUNDFOS DATA BOOKLET CRN45-5 A-F-G-V-HQQV 3x4/69 5 HZ Grundfos Pump 9612315 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn45/9612315/crn-45-5-a-f-g-v-hqqv.html

More information

CR3-13 A-A-A-E-HQQE 1x220/240 50HZ

CR3-13 A-A-A-E-HQQE 1x220/240 50HZ GRUNDFOS DATA BOOKLET CR3-13 A-A-A-E-HQQE 1x22/24 5HZ Grundfos Pump 9653816 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9653816/cr-3-13-a-a-a-e-hqqe.html

More information

CRNE15-03 A-FGJ-G-V-HQQV 3x HZ

CRNE15-03 A-FGJ-G-V-HQQV 3x HZ GRUNDFOS DATA BOOKLET CRNE15-3 A-FGJ-G-V-HQQV 3x4 5 HZ Grundfos Pump 96512744 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crne15/96512744/crne-15-3-a-fgj-g-v-hqqv.html

More information

Close-coupled pumps Series ES04

Close-coupled pumps Series ES04 Close-coupled pumps Series ES04 www.andritz.com/pumps General Description / Application Pumps of series ES04 are extremely compact units which require very little space. They are particularly suitable

More information

3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE

More information

Contents. Identification

Contents. Identification Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions

More information

Lowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz

Lowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733 SH Series 60 Hz SERIE SH HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB 10-2006 2 CONTENTS 5 Specifications... 6

More information

CR10-10 A-A-A-E-HQQE 3x400D 50 HZ

CR10-10 A-A-A-E-HQQE 3x400D 50 HZ GRUNDFOS DATA BOOKLET CR1-1 A-A-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651232 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651232/cr-1-1-a-a-a-e-hqqe.html

More information

CRE10-02 A-A-A-E-HQQE 1x HZ

CRE10-02 A-A-A-E-HQQE 1x HZ GRUNDFOS DATA BOOKLET CRE1-2 A-A-A-E-HQQE 1x2-24 5 HZ Grundfos Pump 9651251 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/cre1/9651251/cre-1-2-a-a-a-e-hqqe.html

More information

CRN3-25 A-P-G-E-HQQE 3x400D 50HZ

CRN3-25 A-P-G-E-HQQE 3x400D 50HZ GRUNDFOS DATA BOOKLET CRN3-25 A-P-G-E-HQQE 3x4D 5HZ Grundfos Pump 96513458 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn3/96513458/crn-3-25-a-p-g-e-hqqe.html

More information

GRUNDFOS DATA BOOKLET MTS. Screw pumps 50/60 Hz

GRUNDFOS DATA BOOKLET MTS. Screw pumps 50/60 Hz GRUNDFOS DATA BOOKLET MTS Screw pumps / Hz Contents Introduction MTS 3 Performance range - MTS, Hz 4 Performance range - MTS, Hz 5 Performance range - MTS, Hz 5 General description Main applications 6

More information

Volute Casing Pump additional sizes to those of ISO 2858/EN 22858

Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:

More information

Pressure relief valve DHV 718

Pressure relief valve DHV 718 Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless

More information

High-pressure pumps Series HP49

High-pressure pumps Series HP49 High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water

More information

Model series CAM / CAM-Tandem

Model series CAM / CAM-Tandem PRODUCT INFORMATION Multistage canned motor pumps Model series CAM / CAM-Tandem Contents Description Description... 2 Application and insertion... 4 Functional principle and materials... 5 Design options...

More information

200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE

200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 20 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 300 203 PERFORMANCE CURVES 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 THERMAL INSULATION DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 THERMAL INSULATION DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW

More information

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps 855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to

More information

LKH-904poles = 1500/1800 rpm at 50/60 Hz. Voltage and frequency 3~,50Hz, V / VY 4kW 3~,60Hz, V / VY 4.

LKH-904poles = 1500/1800 rpm at 50/60 Hz. Voltage and frequency 3~,50Hz, V / VY 4kW 3~,60Hz, V / VY 4. . kythe Premium Pump ky Centrifugal Pump Applications The pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical

More information

Vertical Sump Pump Type ETL

Vertical Sump Pump Type ETL Vertical Sump Pump Type ETL»dry running safe«technical data Flow rate Q up to 220 m 3 /h Head H up to 55 m Submersion depth 500 or 750 mm Suction extension up to 1800 mm Materials limits of use PP up to

More information

Richter Sealless Chemical Magnetic Drive Pumps

Richter Sealless Chemical Magnetic Drive Pumps Richter Sealless Chemical Magnetic Drive Pumps MDK, MDK-B SAFEGLIDE PLUS dry-run option Corrosion-resistant through PFA Unfilled virgin lining Richter sealless chemical magnetic drive pumps Fields of application

More information

APIFLO-M series Series

APIFLO-M series Series APIFLO-M series Series Horizontal Multistage Pump According to API610 Capacity: up to 650m 3 /h (50Hz) up to 780 m 3 /h (60Hz) Head: up to 1200m (50Hz) up to 1728 m (60Hz) Pressure: APIFLO-M: up to 25

More information

KWP non-clogging centrifugal pump. Designation

KWP non-clogging centrifugal pump. Designation Type series booklet.5/80 G KWP KWP nonclogging centrifugal pump Automation products available: PumpEpert Hyamaster hyatronic Fields of Application For handling all kinds of pulps not liable to plait, as

More information

50Hz. Route range ZMR. mechanical sealed TMR. magnetical driven. centrifugal pumps in thermoplastic materials

50Hz. Route range ZMR. mechanical sealed TMR. magnetical driven. centrifugal pumps in thermoplastic materials 5Hz Route range ZMR mechanical sealed TMR magnetical driven centrifugal pumps in thermoplastic materials 2 Route TMR - ZMR In this catalog Argal proposes the range of ROUTE pumps, inclusive of magnetical

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 150 203 PERFORMANCE CURVE 200 204 PERFORMANCE CURVE 300 205 PERFORMANCE CURVE 400 206 - CONSTRUCTIONS

More information

Exploded views of the liquid ends

Exploded views of the liquid ends Liquid ends Sigma/ 2 Liquid end Sigma/ 2 130-DN 1 and 30-DN 2 PVT 1 2 3 6 4 P_SI_0024 Fig. 1: Liquid end Sigma/ 2 130-DN 1 and 30-DN 2 PVT Pos. Description Type 1600, 16090, Type 0430, 07120, 07220 1 Spring

More information

Sealless Magnetic Coupled Multistage Centrifugal Pumps with Priming Stage Type HZSM / HZSMB / HZSMR / HZSMA / HZSMAR

Sealless Magnetic Coupled Multistage Centrifugal Pumps with Priming Stage Type HZSM / HZSMB / HZSMR / HZSMA / HZSMAR Sealless Magnetic Coupled Multistage Centrifugal Pumps with Priming Stage Type HZSM / HZSMB / HZSMR / HZSMA / HZSMAR our contribution for environmental protection General DICKOW-pumps of series HZSM are

More information

Standardized wear parts due to modular design

Standardized wear parts due to modular design E S D 3 4 N D e s i g n s e r i e s E S D 3 4 N Product Information Technical Data Double-acting mechanical seal with liquid lubrication for low pressure applications Standardized wear parts due to modular

More information

SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.

SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451. Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component

More information

CENTRIFUGAL PUMP TYPE SLM NV TO DIN EN AND DIN EN ISO SEALLESS WITH MAGNET DRIVE

CENTRIFUGAL PUMP TYPE SLM NV TO DIN EN AND DIN EN ISO SEALLESS WITH MAGNET DRIVE Production range pumps: Pumps with magnet drive Centrifugal pumps according to DIN EN 22858 Centrifugal pumps according to ANSI B73.3 Centrifugal pumps for refinery and petrochemical applications according

More information

Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m

Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency

More information

JUNG PUMPEN MULTICUT SEWAGE PUMPS

JUNG PUMPEN MULTICUT SEWAGE PUMPS APPLICATION Centrifugal submersible sewage pumps fitted with the MultiCut cutting system are used as stationary appliances for backpressure protection of detached houses. They are suitable for pumping

More information

Single-stage centrifugal pumps to standards en 733 (nfe 44111) and iso 5199 Industry Agriculture - Heating

Single-stage centrifugal pumps to standards en 733 (nfe 44111) and iso 5199 Industry Agriculture - Heating OPERATING LIMITS Flow up to : m /h Head up to : mce Service pressure up to : Jusqu à bar* Temperature range : - à +7 C hot water up to : + C * depending on model NOLH Single-stage centrifugal pumps to

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 1506 203 PERFORMANCE CURVE 2006 203 PERFORMANCE CURVE 3006 203 PERFORMANCE CURVE 4006 203

More information

LIQUID-SPECIFIC PRODUCT LINE: STAINLESS STEEL VANE PUMPS PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 NOMINAL FLOW RATES 2

LIQUID-SPECIFIC PRODUCT LINE: STAINLESS STEEL VANE PUMPS PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 NOMINAL FLOW RATES 2 Page 445.1 PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping liquid

More information

Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400

Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 LPC4 32 205 LPC4 40 206 LPC4 50 211 LPC4 65 215 LPC4 80 219 LPC4 100 222 LPC4 125 225 LPC4 150 226 - CONSTRUCTIONS

More information

TOE-MN / MA / MI Series. Heat transfer pumps for heat transfer oils up to 350 C

TOE-MN / MA / MI Series. Heat transfer pumps for heat transfer oils up to 350 C TOE-MN / MA / MI Series Heat transfer pumps for heat transfer oils up to 350 C with magnetic coupling volute casing PN 16 bearing brackets 360 and 470 2 Pumps for heat transfer technology Main applications

More information

SP A, SP. Submersible pumps Submersible motors Accessories. 50 Hz

SP A, SP. Submersible pumps Submersible motors Accessories. 50 Hz SP A, SP Submersible motors Accessories For raw water supply, irrigation systems, groundwater lowering, pressure boosting and various industrial applications. 5 Hz TM 7318 2298 Contents General data Performance

More information

XMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.

XMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO. Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others

More information

LKH-90 4 poles = 1500/1800 rpm at 50/60 Hz.

LKH-90 4 poles = 1500/1800 rpm at 50/60 Hz. . kythe Premium Pump ky LKH Centrifugal Pump Applications The LKH pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical

More information

CDX CENTRIFUGAL PUMPS EPA

CDX CENTRIFUGAL PUMPS EPA 4 CONTENTS V4 - SPECIFICATIONS Page Features & Applications 00 Typical Exploded View 0 Pump & Motor Specifications 02 Selection Chart / Type key 03 - PERFORMANCE CURVES Performance Curve Specifications

More information

Screw Pump Twin Aggregates Series SPZ/M MagDrive

Screw Pump Twin Aggregates Series SPZ/M MagDrive Screw Pump Twin Aggregates Series SPZ/M MagDrive Application For the delivery of fuel oils, hydraulic oils or other lubricating liquids. The fluid media must not contain any abrasive particles nor attack

More information

High-pressure pumps Series HP45

High-pressure pumps Series HP45 High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water

More information

kyproven Performance and Reliability

kyproven Performance and Reliability . kyproven Performance and Reliability Alfa Laval SRU Rotary Lobe Pump Application The SRU range of rotary lobe pumps has been designed for use on wide ranging applications within the Brewing, Dairy, Food,

More information

MMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

MMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250

More information

Technical data 50 & 60 Hz. Vertical centrifugal pumps Series: DPLHS

Technical data 50 & 60 Hz. Vertical centrifugal pumps Series: DPLHS Technical data 50 & 60 Hz Vertical centrifugal pumps Series: DPLHS 2 Table of Contents 1 Pump introduction 1.1 General... 4 1.2 Model key... 4 1.3 Description of the product... 4 1.4 Operation... 5 1.5

More information

3 way ball valve S4 hand operated

3 way ball valve S4 hand operated General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN

More information

GRUNDFOS DATA BOOKLET. Self-priming. 50/60 Hz

GRUNDFOS DATA BOOKLET. Self-priming. 50/60 Hz GRUNDFOS DATA BOOKLET CM Self-priming 5/6 Hz CM Table of contents 1. Introduction 3 Product presentation 3 Applications 3 2. Features and benefits 4 3. Type key 5 4. Product range 6 5. Performance range

More information

Turbine meter. Operating manual. A-EN Rev.E 11/2013. Page 1 of 16

Turbine meter. Operating manual. A-EN Rev.E 11/2013. Page 1 of 16 Turbine meter with pulse pick-up RQ AG81/82/83 Operating manual Bopp & Reuther Am Neuen Rheinhafen 4 67346 Speyer Germany Phone : +49 (6232) 657-0 Fax: +49 (6232) 657-505 info@bopp-reuther.de www.bopp-reuther.de

More information

Identity code: Meta MTMa Diaphragm Metering Pumps Series: Meta diaphragm-type metering pump Version a

Identity code: Meta MTMa Diaphragm Metering Pumps Series: Meta diaphragm-type metering pump Version a Identity code: Meta MTMa Diaphragm Metering Pumps MTMa Series: Meta diaphragm-type metering pump Version a H A Main drive Add-on drive Pump version: New Cross Reference Conversion Table from former version

More information

INLINE Flow sensor for hazardous area II 1 G/D - II 2 D - II 3 GD - I M1

INLINE Flow sensor for hazardous area II 1 G/D - II 2 D - II 3 GD - I M1 INLINE Flow sensor for hazardous area II G/D - II D - II GD - I M Type SE0 Ex can be combined with... Flow meter with NAMUR or NPN/PNP output signal Mounting, dismounting of electronics by a Quarter-Turn

More information

HX, H2X and HCO Series Technical Guide. Monophasic and biphasic stainless steel centrifugal electropumps

HX, H2X and HCO Series Technical Guide. Monophasic and biphasic stainless steel centrifugal electropumps HX, H2X and HCO Series Technical uide Monophasic and biphasic stainless steel centrifugal electropumps HX, H2X and HCO Series Series, H2X y HCO t Index HX and H2X series application sectors... 4 HX series

More information

CENTRIFUGAL PUMP TYPE SLM NV TO DIN EN ISO 2858 AND DIN EN ISO 15783

CENTRIFUGAL PUMP TYPE SLM NV TO DIN EN ISO 2858 AND DIN EN ISO 15783 Product Program Pumps: Product Program Valves: Pumps with Magnet Drive E Centrifugal Pumps acc. to DIN EN ISO 2858 & DIN EN ISO 15789, SLM NV E Centrifugal Pumps acc. to ANSI B73.3, SLM AVO E Centrifugal

More information

Side Channel Pumps CEH CEH 1202/ /7 TECHNICAL DATA. Temperature: max. 180 C Casing pressure: PN 40

Side Channel Pumps CEH CEH 1202/ /7 TECHNICAL DATA. Temperature: max. 180 C Casing pressure: PN 40 Side Channel Pumps CEH 1201... 6108 CEH 1202/7... 6107/7 TECHNICAL DATA Output: Delivery head: Speed: max. 35 m³/h max. 354 m max. 1800 rpm Temperature: max. 180 C Casing pressure: PN 40 Shaft sealing:

More information

Hydraulic Pumps Classification of Pumps

Hydraulic Pumps Classification of Pumps Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org

More information

Page - DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403

Page - DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 2-3 IMPELLERS ) 204 PERFORMANCE CURVE 3 ( 4-5-6 IMPELLERS )

More information

Productinformatie BAFA.NL BAFA.NL A.U.K. MÜLLER GMBH & CO. KG

Productinformatie BAFA.NL BAFA.NL A.U.K. MÜLLER GMBH & CO. KG Productinformatie A.U.K. MÜLLER GMBH & CO. KG Solenoid valves Control valves Special valves and systems GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany Tel.: +49(0)211-7391-0 Fax: +49(0)211-7391-281

More information

VIKING. Viking Mag Drive Series 855. Ideal for: Hard-to-Seal Liquids 24/7 Operations Hazardous and Toxic Liquids

VIKING. Viking Mag Drive Series 855. Ideal for: Hard-to-Seal Liquids 24/7 Operations Hazardous and Toxic Liquids Viking Mag Drive Series 855 VIKING Ideal for: Hard-to-Seal Liquids 24/7 Operations Hazardous and Toxic Liquids Capacity to 29.5 M 3 /Hr (130 GPM) Pressure to 14 Bar (200 PSI) Viscosity to 55,000 cst (250,000

More information

WEDGE & SLAB GATE VALVES

WEDGE & SLAB GATE VALVES GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have

More information

CHEMICAL REFRIGERATION. Convincing worldwide: HERMETIC pumps in the refrigeration industry

CHEMICAL REFRIGERATION. Convincing worldwide: HERMETIC pumps in the refrigeration industry CHEMICAL Oil & Gas REFRIGERATION Power generation SERVICE Convincing worldwide: HERMETIC pumps in the refrigeration industry RESPONSIBILITY FOR THE ENVIRONMENT Attitudes towards environmental awareness

More information

CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.

CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional

More information

kythe Premium Pump LKH Centrifugal Pump

kythe Premium Pump LKH Centrifugal Pump . kythe Premium Pump ky LKH Centrifugal Pump Applications The LKH pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical

More information

Pressure relief controller for oil V22D28 (PN 16, 25)

Pressure relief controller for oil V22D28 (PN 16, 25) Data sheet Pressure relief controller for oil V22D28 (PN 16, 25) Description The controller has a control valve, an actuator with one control diaphragm and a spring for pressure setting. Features: - safe

More information

DSD Technology Reinventing metering pumps Dynamic Stiffness Diaphragm - High hydraulic performance

DSD Technology Reinventing metering pumps Dynamic Stiffness Diaphragm - High hydraulic performance G A and G M series DOSING PUMPS / DSD Technology Up to 11.95 l/h and 70 bar / Product advantages DSD Technology Reinventing metering pumps Dynamic Stiffness Diaphragm - High hydraulic performance NEW Plunger

More information

High-speed Centrifugal Pump according to API 610

High-speed Centrifugal Pump according to API 610 EGS-L, EGS-W Series High-speed Centrifugal Pump according to API 610 Capacity: 2~90 m 3 /h (50Hz) 2.4~108 m 3 /h (60Hz) Head: up to 1500 m (50Hz) up to 2160 m (60Hz) Pressure: EGS-L: up to 15 MPa, EGS-W:

More information

Mag-drive Pump. Magnochem-Bloc. Type Series Booklet

Mag-drive Pump. Magnochem-Bloc. Type Series Booklet Mag-drive Pump Magnochem-Bloc Type Series Booklet Legal information/copyright Type Series Booklet Magnochem-Bloc All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,

More information

2/2-way assisted lift operated solenoid valve type EV250B

2/2-way assisted lift operated solenoid valve type EV250B MAKING MODERN LIVING POSSIBLE Data sheet 2/2-way assisted lift operated solenoid valve type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve

More information

TOE-GN / GA / GI Series. Heat transfer pumps for heat transfer oils up to 350 C and hot water up to 160 C

TOE-GN / GA / GI Series. Heat transfer pumps for heat transfer oils up to 350 C and hot water up to 160 C TOE-GN / GA / GI Series Heat transfer pumps for heat transfer oils up to 350 C and hot water up to 160 C with uncooled mechanical seals volute casing PN 16 bearing brackets 360 and 470 2 Pumps for heat

More information

Corrosion Resistant Fiberglass Submersible Pumps. EU product Made in Italy

Corrosion Resistant Fiberglass Submersible Pumps. EU product Made in Italy EU product Made in Italy Corrosion Resistant Fiberglass Submersible Pumps ARGALSUB - SUBMERSIBLE PUMPS IN COMPOSITES Argal proposes in this catalog its new range of submersible pumps made in Fiber Reinforced

More information

JUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering

JUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering Data Sheet 22943 Page 1/9 JUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering Brief description The sensor detects the electrolytic conductivity of a process liquid.

More information

GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN

GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.

More information

MODEL MAGPRO AM PG 2.2 CENTRIFUGAL PUMPS

MODEL MAGPRO AM PG 2.2 CENTRIFUGAL PUMPS MODEL MAGPRO AM M A G N E T I C D R I V E PG 2.2 CENTRIFUGAL PUMPS WORKING PRINCIPLE Magnetic drive pumps are Seal-less. The driving torque is transmitted by a permanent magnetic coupling to an internal

More information

Dewatering Submersible sewage pumps

Dewatering Submersible sewage pumps Series description Wilo-Drain TP 80/TP 100 Equipment/function Thermal motor monitoring Leakage detection in the motor ATEX-certified Sheath current cooling Materials Pump housing: PUR Impeller: PUR Shaft:

More information

2/2- and 3/2-way solenoid valve for aggressive fluids

2/2- and 3/2-way solenoid valve for aggressive fluids 2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,

More information

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering

More information

DEBEM. HORIZONTAL CENTRIFUGAL PUMPS

DEBEM.  HORIZONTAL CENTRIFUGAL PUMPS MB HORIZONTAL CENTRIFUGAL PUMPS Debem manufactured resin-encased horizontal centrifugal pumps are pumps operated by a direct-drive motor (max 3 rpm) for fast fluid transfer and/or drainage with flow rates

More information

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301

More information

Universal Centrifugal Pump (UC) Centrifugal Pumps

Universal Centrifugal Pump (UC) Centrifugal Pumps Universal Centrifugal Pump (UC) Centrifugal Pumps Engineering excellence, allied to stringent quality control, ensures that SPX s unrivalled range of Waukesha Cherry-Burrell products complies with the

More information

Lug Style Butterfly Valve Type 578

Lug Style Butterfly Valve Type 578 Lug Style Butterfly Valve Type 58 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 Stainless steel Lugs:

More information

GRUNDFOS PRODUCT GUIDE. Redi-Flo3 and CU 300. Environmental Pumps 60Hz

GRUNDFOS PRODUCT GUIDE. Redi-Flo3 and CU 300. Environmental Pumps 60Hz GRUNDFOS PRODUCT GUIDE Redi-Flo3 and CU 300 Environmental Pumps 60Hz Table of Contents Features and Benefits..................................... pages 4-5 Applications.............................................

More information

General Catalog. A New Vision for Quality Pumps. General Catalog

General Catalog. A New Vision for Quality Pumps. General Catalog General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve

More information

SANITARY/HYGIENIC NON-MOTORIZED

SANITARY/HYGIENIC NON-MOTORIZED Section: MOYNO 500 PUMPS Page: 1 of 4 Date: March 2002 SERVICE MANUAL MOYNO 500 PUMPS SANITARY/HYGIENIC NON-MOTORIZED 331, 332, 333 AND 344 MODELS SANITARY MODELS These pumps include housings polished

More information

Servo-operated 2/2-way solenoid valves Type EV220A

Servo-operated 2/2-way solenoid valves Type EV220A Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and

More information

Mounting and Operating Instructions EB 5868/5869 EN

Mounting and Operating Instructions EB 5868/5869 EN Electric Control Valves Types 3213/5857, 3213/5824, Types 3214/5824, 3214/3374, 3214/3274 with safety function: Types 3213/5825, 3214/5825, 3214/3374, 3214/3274 Pneumatic Control Valves Types 3213/2780-1,

More information

Nominal sizes: DN 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150 Pressure rating: PN 16. Product No. Nominal size Body connection

Nominal sizes: DN 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150 Pressure rating: PN 16. Product No. Nominal size Body connection Operating Instructions ERHARD Flow Indicator 1 Description of Product and Range of Application 2 Design Features Technical Data 3 Performance and Mode of Operation 4 Installation into the Pipeline Mounting

More information

Engineering Manufacturing Installation Process equipment for production scale in chemistry and pharma

Engineering Manufacturing Installation Process equipment for production scale in chemistry and pharma Engineering Manufacturing Installation Process equipment for production scale in chemistry and pharma Compact, customized solutions Complete process units Robust material and design Reliable and safe operation

More information