DAF Truck. Spare parts and accessories. EUROPART Europe's No. 1 for truck, trailer, van and bus spare parts.

Transcription

1 DAF Truck Spare parts and accessories Spare parts to fit: XF, CF, LF Technical equipment and accessories EUROPART Europe's No. for truck, trailer, van and bus spare parts.

2 Exacting standards required. Impressive quality delivered. The EUROPART brand: Excellent products, based on manufacturer standards With EUROPART own-brand products, you benefit from a competitively priced alternative. Whether you need vehicle parts such as brake discs, linings, batteries and filters or workshop materials such as chemical products, oils and tools our constantly growing and technically advanced range of over 6,500 own-brand products provides the right solution for every situation and every customer requirement. Our strict and careful selection of suppliers reflects our high standards. These are products that impress even under extreme conditions and are of a quality based on manufacturer standards. This you can depend on always. EUROPART Europe's No. for truck, trailer, van and bus spare parts.

3 Dear Customers, this catalogue offers you an overview of our top sellers that are suitable for DAF trucks. From our comprehensive range we have compiled about,500 items for you, that are suitable for the XF, CF and LF series from model years 997 to 206. The catalogue is clearly divided by series in the product areas: engine drive suspension and damping axles and steering braking system compressed air lighting and electrics bodywork cab Series overview: Model series Model year Cab variants XF Euro Comfort Cab, Space Cab, Super Space Cab XF Comfort Cab, Space Cab, Super Space Cab XF Comfort Cab, Space Cab, Super Space Cab 95XF 997- Comfort Cab, Space Cab, Super Space Cab CF Euro Day Cab, Sleeper Cab, Space Cab CF Day Cab, Sleeper Cab, Space Cab CF Day Cab, Sleeper Cab, Space Cab CF Day Cab, Sleeper Cab, Space Cab 85CF 998- Day Cab, Sleeper Cab 75CF 998- Day Cab, Sleeper Cab 65CF 998- Day Cab, Sleeper Cab LF Euro Day Cab, Sleeper Cab LF Day Cab, Sleeper Cab LF Day Cab, Sleeper Cab In addition, in a comprehensive accessories section we offer you an overview of universal equipment items for your DAF vehicles as well as suitable products for your workshop. Are you looking for a particular item that is not shown in the catalogue or do you have questions about a product? Please contact us. We ll be happy to help. Tips for using the catalogue: The vehicle descriptions and engine types serve as guidance during identification of the precise vehicle application*. To identify a part - specific to your vehicle - please contact your EUROPART subsidiary with the complete Vehicle Identification Number (VIN, see page 4) or use the vehicle part search in our EUROPART Workshop Online System EWOS ( * Insofar as brand names of vehicle manufacturers are used in the catalogue, they are to be understood as designation information. The brand names indicate that the corresponding items are suitable for the named vehicle. The cross-reference numbers given on the pages of the catalogue serve for the purposes of identification.

4 Vehicle identification The VIN number will be found on the vehicle type plate which is located on the door frame, it is also stamped into the vehicle chassis near the front right-hand wheel. Breakdown of the DAF Vehicle Identifi cation Number (VIN): Example: XLR T E 47 M S 0 E World Manufacturer Identifi er code (WMI code) for DAF Trucks Chassis number Vehicle construction (T = tractor) Assembly site (E = Eindhoven) Axle confi guration (E = 4 x 2) Model year code (0 = standard) Series (47 = XF05, XF95, 95XF) Engine type (S = turbo with charge air cooler) Engine capacity (M = Paccar/DAF 2.9 l) EUROPART Europe s No. for truck, trailer, van and bus spare parts.

5 Composition of the DAF vehicle type designation: Example: CF 460 FTT 6 x 4 Model series PS-number Chassis type Axle configuration Axle types/axle configurations: Truck chassis FA 4 x 2 Truck with drive axle FAR 6 x 2 Truck with drive axle and tag axle (single tyre) FAS 6 x 2 Truck with drive axle and tag axle (dual tyres) FAG 6 x 2 Truck with steered pusher axle and drive axle FAN 6 x 2 Truck with drive axle and steered tag axle FAT 6 x 4 Truck with 2 drive axles FAK 8 x 2 Truck with steered pusher axle, drive axle and tag axle (dual tyres) FAQ 8 x 2 Truck with steered pusher axle, drive axle and steered tag axle FAC 8 x 2 Truck with 2 front axles, drive axle and tag axle (dual tyres) FAX 8 x 2 Truck with 2 front axles, drive axle and steered tag axle FAD 8 x 4 Truck with 2 front axles and 2 drive axles Tractor vehicles FT 4 x 2 Tractor vehicle with drive axle FTG 6 x 2 Tractor with steered pusher axle and drive axle FTP 6 x 2 Tractor with rigid pusher axle (baby axle) and drive axle FTN 6 x 2 Tractor with drive axle and steered tag axle FTR 6 x 2 Tractor with drive axle and tag axle (single tyre) FTS 6 x 2 Tractor with drive axle and tag axle (dual tyres) FTT 6 x 4 Tractor with 2 drive axles FTM 8 x 4 Tractor with steered pusher axle and 2 drive axles

6 Urgent questions? Direct assistance. Telephone support: EUROPART technicians are ready to help you Customer satisfaction in our top priority. That s why you can expect not only high-quality products from EUROPART, but also a friendly and expert service team who are ready to help you by phone. Contact our qualified EUROPART technicians who will not only give you expert advice but will also assist you with your questions and problems, providing technical support as well as a reliable fault diagnosis service. We will also be happy to provide you with free remote maintenance using a secure remote connection. Whether your components are made by Haldex, Knorr or WABCO contact us directly to make use of our expertise. EUROPART Europe s No. for truck, trailer, van and bus spare parts.

7 XF CF LF Technical equipment and accessories 4 3 2

8 8

9 9 XF Engine Drivetrain Suspension and damping Axles and steering Braking system Compressed air Lighting and electrics Bodywork Cab

10 0 Engine XF Engine Parts suitable for engine type MX-3 (Euro 6), installed in DAF XF Euro 6 Description Version Number per engine Crankshaft seal front Crankshaft seal rear Cylinder head gasket Cylinder head screw set Main bearing pair standard Oil pan gasket Stop disc set standard Valve cover gasket Engine Parts suitable for engine type MX- (Euro 6), installed in DAF XF Euro 6 Description Version Number per engine Crankshaft seal front Crankshaft seal rear Cylinder head gasket Oil pan gasket Engine Parts suitable for engine type 290 XE, MX 05 (Euro 5, EEV), installed in DAF XF05 Description Version Number per engine Crankcase seal set Crankshaft seal front Crankshaft seal rear Cylinder head gasket set Cylinder head screw set Cylinder liner wet Cylinder liner end seal set Main bearing pair standard Oil pan gasket Piston ring set set per piston Stop disc set standard

11 Engine Engine Parts suitable for engine type 260 XE (Euro 3), installed in DAF XF95 Description Version Number per engine Connecting rod bearing pair standard Crankcase seal set Crankshaft seal front Crankshaft seal rear Cylinder head gasket set Cylinder head screw M6, 46 mm Cylinder head screw M2, 40 mm Cylinder liner dry Main bearing set standard Oil pan gasket Piston ring set set per piston Piston with pin and rings XE 35 C, x valve seat pocket Piston with pin and rings XE 35 C, 3 x valve seat pocket Piston with pin and rings XE 355 C, 3 x valve seat pocket Stop disc set standard XF Engine Parts suitable for engine type 260 XE (Euro 3), installed in DAF 95XF Description Version Number per engine Connecting rod bearing set standard Crankcase seal set Crankshaft seal rear Crankshaft seal front Cylinder head gasket set ZKD soft material Cylinder head gasket set Cylinder head screw M6, 46 mm Cylinder head screw M2, 40 mm Cylinder liner dry Main bearing set standard Oil pan gasket Piston ring set set per piston Piston with pin and rings Stop disc set standard Engine Parts suitable for engine type 260 XF (Euro 2), installed in DAF 95XF Description Version Number per engine Connecting rod bearing set standard Crankcase seal set Crankshaft seal front Crankshaft seal rear Cylinder head gasket set ZKD soft material Cylinder head screw M6, 46 mm Cylinder head screw M2, 40 mm Cylinder liner dry Main bearing set standard Oil pan gasket Piston with pin and rings Stop disc set standard

12 2 Engine XF Central silencer Standard Euro 4/5 XF05, XF Dinex 244 Accessories suitable for DAF XF05 Description Comparative no. Clamping piece, Inner 27 mm Dinex Exhaust pipe clamp, Inner 27 mm Dinex 2850 Flexible pipe, Length 650 mm Dinex 2268 Front pipe, Length 46 mm Dinex 2275 Rear silencer Dinex 2452 Tailpipe, Length 696 mm Dinex 2260 Tailpipe, Length 795 mm Dinex 2633 Tailpipe, Length 825 mm Dinex 2632 Central silencer Standard Euro 3 XF Dinex 2488 Accessories suitable for DAF XF95 Description Comparative no. Front pipe, Length 027 mm Dinex 2253 Clamping piece, Inner 27 mm Dinex Exhaust pipe clamp, Inner 27 mm Dinex 2850 Half pipe clamp Dinex

13 Engine 3 Central silencer Standard Euro 3 XF XF Dinex 23 Accessories suitable for DAF XF95 Description Comparative no. Front pipe, Length 980 mm Dinex 2245 Clamping piece, Inner 27 mm Dinex Exhaust pipe clamp, Inner 27 mm Dinex 2850

14 4 Engine XF Central silencer Standard Euro 3 XF Dinex 2496 Accessories suitable for DAF XF95 Description Comparative no. Front pipe, Length 980 mm Dinex 2245 Tailpipe, Length 820 mm Dinex 2736 Tailpipe, Length 458 mm Dinex 2778 Clamping piece, Inner 27 mm Dinex Exhaust pipe clamp, Inner 27 mm Dinex 2850 Clamping piece, mm Dinex Half pipe clamp Dinex 2847 Central silencer Standard Euro 3 95XF Dinex 2486 Accessories suitable for DAF 95XF Description Comparative no. Exhaust pipe, Length 940 mm Dinex 223 Front pipe, Length 980 mm Dinex 2245 Tailpipe, Length 960 mm Dinex 2705 Tailpipe, Length 950 mm Dinex 2739 Tailpipe, Length 570 mm Dinex 2706 Exhaust pipe clamp, Inner 27 mm Dinex 2850 Protective plate Dinex 2846 Half pipe clamp Dinex 2847 Clamping piece, Inner 27 mm Dinex

15 Engine 5 Exhaust turbocharger in exchange XF XF BorgWarner XF BorgWarner Exhaust turbocharger in exchange XF BorgWarner Exhaust turbocharger in exchange (Illustration similar) 95XF Garrett XF Garrett XF Garrett Charge air cooler Length 553 mm Width 852 mm Depth 50 mm XF HELLA 8ML Charge air cooler Length 553 mm Width 855 mm Depth 52 mm XF95, 95XF Dasis 29720N

16 6 Engine XF Charging pressure sensor XF05, XF Bosch Charging pressure sensor XF95, 95XF Bosch Charge air hose Outer 9 mm Inner 97 mm Length 75 mm XF DAF Charge air hose Inner 00 mm Length 404 mm XF95, 95XF DAF Hose clip for charge air hose Width Clamping range 5,8 mm 95-7 mm XF95, 95XF DAF

17 Engine 7 Engine radiator Length 748 mm Width 067 mm Depth 40 mm XF (Illustration similar) XF HELLA 8MK Engine radiator Length 748 mm Width 067 mm Depth 42 mm XF95, 95XF HELLA 8MK Engine radiator Length 748 mm Width 067 mm Depth 40 mm XF95, 95XF HELLA 8MK Coolant temperature sensor Version threaded, with seal Spanner size 9 mm Thread M4 x,5 XF05, XF HELLA 6PT

18 8 Engine XF Fan wheel Outer 720 mm Number of blades 8 without clutch XF05, XF HELLA 8MV Fan wheel Outer 720 mm Number of blades without clutch XF05, XF HELLA 8MV Fan wheel Outer 720 mm Number of blades 8 without clutch XF05, XF95, 95XF HELLA 8MV Fan wheel Outer 760 mm Number of blades without clutch XF05, XF HELLA 8MV Fan wheel Version with calotte Outer 720 mm Number of blades 8 without clutch XF95, 95XF HELLA 8MV

19 Engine 9 Radiator fan coupling without fan Version Outer electronic 275 mm XF XF HELLA 8MV XF HELLA 8MV Radiator fan coupling without fan Version electronic Outer 275 mm XF HELLA 8MV Water pump Length 320 mm Width 240 mm Thickness 70 mm Impeller- 35 mm with gaskets 95XF, XF DAF Water pump Impeller- 20 mm with gasket XF05, XF DAF Water pump seal XF95, 95XF DAF

20 20 Engine XF Hand feed pump for pre-charging with fuel Version with sealing ring Outer thread M6 x,5 95XF DAF 3608 Coolant filter Filter type Screw-on filter 95XF Hengst H35WF Oil filter This fi gure corresponds to suitable for Filter type Comparative no. XF Euro 6, XF05 Filter insert Hengst E89HD23 MANN HU 2 03 x Knecht/Mahle OX 434D XF95, 95XF Centrifuge Hengst Z2 D64 MANN ZR 903 x Knecht/Mahle OZ 5D 95XF Screw-on fi lter Hengst H300W03 MANN WP XF Screw-on fi lter Hengst H300W02 MANN W 3 45/6 Oil filter This fi gure corresponds to suitable for Filter type Comparative no. XF Euro 6, XF05 Filter insert Hengst E89H D23 XF Euro 6, XF05 Centrifuge Hengst Z6 D83 XF Euro 6 Filter insert Hengst E830H D253 XF95, 95XF Centrifuge Hengst Z2 D64 XF95 Filter insert Hengst E34H D23 XF95 Filter insert Hengst E43H D23 95XF Filter insert Hengst E39H D20 95XF Screw-on fi lter Hengst H300W02 95XF Screw-on fi lter Hengst H300W03

21 Engine 2 Hydraulic filter for steering XF (Illustration similar) XF Euro 6, XF05, XF95, 95XF Hengst E0H02 MANN H 60/4 Knecht/Mahle HX 5 Hydraulic filter for steering This figure corresponds to XF Euro 6, XF05, XF95, 95XF Hengst E0H02 XF Euro Hengst E70H Fuel pre-filter XF Euro 6, XF05, XF95, 95XF Hengst H70WK MANN PL 420 x Knecht/Mahle KC 296D Fuel filter This figure corresponds to suitable for Filter type Comparative no. XF05, XF95 Screw-on filter Hengst H7090WK30 MANN WK 060/3 x Knecht/Mahle KC 249D XF05 Filter insert Hengst E82KP D36 MANN PU 966/ x Mahle/Knecht KX 262 D XF95 Filter insert Hengst E70KP D98 MANN PU 966/2 x XF95 Filter insert Hengst E66KP D36 MANN PU 999/2 x Knecht/Mahle KX 8D ECO

22 22 Engine XF Fuel pre-filter XF Euro 6, XF05, XF95, 95XF Hengst H70WK Fuel filter This fi gure corresponds to suitable for Filter type Comparative no. XF05, XF95 Screw-on fi lter Hengst H7090WK30 XF05 Filter insert Hengst E82KP D36 XF95 Filter insert Hengst E66KP D36 XF95 Filter insert Hengst E70KP D98 95XF Screw-on fi lter Hengst H8WK 95XF Screw-on fi lter Hengst H8WDK03 95XF Screw-on fi lter Hengst H8WDK05 Air filter Filter type Filter insert XF05, XF95, 95XF Hengst E702L MANN C / Air filter This fi gure corresponds to suitable for Filter type Comparative no. XF Euro 6, XF05 Filter insert Hengst E084L XF05, XF95, 95XF Filter insert Hengst E702L XF05, XF95 Screw-on fi lter Hengst H00WL XF05 Filter insert Hengst E794L 95XF Filter insert Hengst E33L

23 Engine 23 Urea filter for AdBlue system Filter type Filter insert XF This fi gure corresponds to XF Euro Hengst E03U D295 XF Hengst E0U D324 Coolant expansion tank This fi gure corresponds to suitable for Length x width x depth Capacity Comparative no. XF x 345 x 05 mm 6,7 l HELLA 8MA XF x 337 x 04 mm,8 l HELLA 8MA without cap Accessories Description suitable for Cover lid for expansion tank Coolant expansion tank Length 547 mm Width 337 mm Depth 07 mm Capacity,8 l suitable for XF95, 95XF Accessories Description Cover lid for expansion tank Oil cooler Length 29 mm Width 90 mm Height 34 mm XF Euro 6, XF05, XF HELLA 8MO

24 24 Engine XF Oil cooler Length 206 mm Width 6 mm Height 95 mm XF HELLA 8MO Oil cooler for retarder Length Width Height 350 mm 75 mm 70 mm XF HELLA 8MO Oil cooler gasket set XF05, XF DAF Oil pressure sensor Switching pressure 0,4 bar Spanner size 22 mm 95XF DAF 6643 Fuel Anti-syphon simple insertion, no drilling, no fi ling, model patented, the safety device is simply turned and fi xed into the tank, once installed, it is impossible for diesel to be drained out of the tank, the original fuel cap is retained, integrated anti-rebound system (anti-vortex), double chrome-plating and electrogalvanised Height 65 mm 05 mm suitable for XF

25 Engine 25 XF Fuel cap Version lockable, with ventilation Material stainless steel 80 mm XF DAF RE-ORIENTED INITIATIVE FOR REPAIR SHOPS AND TRADE SMART PARTNER

26 26 Drivetrain XF Ribbed V-belt suitable for Profile Length XF05 7 PK 752 mm XF05 9 PK 380 mm Ribbed V-belt suitable for Profile Length XF05 7 PK 752 mm XF05 9 PK 358 mm XF05 9 PK 380 mm XF05 9 PK 424 mm XF95 8 PK 76 mm Ribbed V-belt set suitable for Profile Length XF05 7 PK with idler roller and belt tensioner 753 mm XF05 9 PK poly-v belt and tensioner, without housing (DAF 83986) 360 mm XF05 9 PK poly-v belt and tensioner, without housing (DAF 83986) 380 mm XF05 9 PK poly-v belt and tensioner, without housing (DAF 83986) 425 mm XF95 8 PK with belt tensioner 75 mm Poly-V belt tensioner This fi gure corresponds to suitable for Outer Roll width XF05 69,9 mm 3,7/72,99 mm XF05 77,95 mm 38,85/9,83 mm

27 Drivetrain 27 Poly-V belt tensioner Roll width 30,5 mm This fi gure corresponds to XF suitable for Outer XF05 70 mm XF95 85 mm Poly-V belt tensioner Outer 78 mm Width 3 mm XF SKF VKMCV Reliable. SKF System 24 for DAF XF The LAGD series from the SFK SYSTEM 24 family includes an automatic lubricator for individual lubrication points in many different applications. The units are delivered ready-to-use and are filled with high-quality SKF lubricant from our extensive product range. Toolless activation and and adjustable dispensing time periods allow for the lubricant supply to be easily and precisely regulated.

28 28 Drivetrain XF V-belt Width 3 mm suitable for Length 95XF 000 mm XF 025 mm XF 275 mm V-belt Profi le AVX suitable for Width Length XF95 3 mm 000 mm XF95 3 mm 225 mm XF95 3 mm 225 mm XF 0 mm 225 mm XF 3 mm 025 mm XF 3 mm 275 mm V-belt Width 7 mm Length 430 mm suitable for XF Deflection pulley/guide pulley for poly-v-belt Outer Width 77,95 mm 38,55 mm suitable for XF Deflection pulley/guide pulley for poly-v-belt Outer suitable for 78 mm XF

29 Drivetrain 29 Clutch kit 430 mm XF XF05, XF Valeo Clutch kit in exchange 430 mm Number of teeth 0 XF Euro Sachs From us to you! All information digitally. R On our web portal R R Enter article designation R Specific product information R On your mobile device (platform-independent, no installation necessary) R Scan QR code on product packaging R Product-specific information ContiTech Antriebssysteme GmbH aam@ptg.contitech.de

30 30 Drivetrain XF Clutch kit in exchange 430 mm This fi gure corresponds to suitable for Comparative no. XF LuK XF LuK XF05 with automatic mechanism and release bearing LuK XF95, 95XF LuK XF95 Disc, automatic unit, release bearing LuK XF LuK Clutch plate in exchange Parameter 430GTZ 430 mm XF Euro 6, XF Sachs XF Sachs Coupling pressure plate Parameter 430ZBFK 430 mm XF05, XF95, 95XF LuK Coupling pressure plate in exchange 430 mm XF Valeo

31 Drivetrain 3 Clutch releaser Parameter KZISZ-5 XF XF05, XF95, 95XF LuK Clutch releaser Parameter KZISZ-5 This fi gure corresponds to XF Euro 6, XF LuK XF LuK Release fork Version roller design XF Euro 6, XF05, XF Sachs Release fork for automatic gearbox Length Width Thickness 275 mm 40 mm 62 mm suitable for XF Euro 6, XF05, XF Release fork Length 275 mm Width 40 mm Thickness 62 mm suitable for XF05, XF

32 32 Drivetrain XF Release fork Outer thread M8 x,25 Length 275/70 mm Width 40 mm suitable for XF Accessories Description Bolt, Outer 27/30 mm, Bore hole 2,5 mm, Length 45 mm Clutch servo XF Knorr 62934AM Clutch servo Piston 00 mm Stroke 85 mm XF Knorr AM Clutch servo Connection M6 x,5 Piston 6 mm Stroke 75 mm XF WABCO Guide bearing for transmission input shaft in the crankshaft Outer Inner Width 62 mm 25 mm 9 mm suitable for XF Euro 6, XF05, XF

33 Suspension and damping 33 XF 2 Air spring Version with steel piston Piston 230 mm Installation location rear axle matching bolt kit suitable for Fig. Comparative no. XF05, XF Conti 836 M K XF05, XF Conti 836 M2 K XF05, XF Conti 887 M K Air spring suitable for Version Piston Bolt set Fig. Comparative no. XF Euro 6, XF05 with plastic piston 242 mm Conti 792 N P02 XF Euro 6, XF95 with steel piston 92 mm Conti 887 M K2 XF Euro 6, XF95 with steel piston 220 mm Conti 836 M K XF05, XF95, 95XF with steel piston 70 mm Conti 887 M K3 XF05, XF95 with plastic piston 242 mm Conti 792 N P0 XF05, XF95 with steel piston 85 mm Phoenix 887 M K4 XF05, XF95 with steel piston 230 mm Conti 836 M K XF05, XF95 with steel piston 92 mm Conti 889 M K2 XF05, XF95 with steel piston 92 mm Conti 887 M K XF05 with steel piston 85 mm Conti 887 N P09

34 34 Suspension and damping XF Air spring Version double bellows Air connector M6 x,5 Outer mm of cover 286 mm Thread 4 x M8 Height 264 mm Distance between holes 58,8 mm XF05, XF Conti FD P03 Air spring bellows Version without piston Installation location front axle Outer thread M0 x,5/ M6 x,5 Outer 3/228 mm of cover 239,5 mm matching bolt kit XF05, XF Conti 889 M Screw set Comparative no Conti K Shock absorber Installation location rear axle Fastening Eye/eye Version Oil pressure, twin-tube system 95XF Sachs

35 Suspension and damping 35 Shock absorber Installation location front axle Fastening pin/pin Version oil pressure, twin-tube system (Illustration similar) XF XF95, 95XF Sachs Shock absorber Version oil pressure, twin-tube system This fi gure corresponds to suitable for Installation location Fastening Comparative no. XF05, XF95 front axle pin/pin Sachs XF Euro 6 rear axle eye/eye Sachs XF05, XF95, 95XF rear axle eye/eye Sachs XF05, XF95 front axle pin/eye Sachs 3 58 XF05 rear axle eye/eye Sachs XF95 front axle pin/pin Sachs Leaf spring Axle load 7, t Number of leaves 2 Form L Width 80 mm Bushing rear 24/60 mm Bushing front Installation location Length Thickness Camber 24/60 mm front axle 900/900 mm 64 mm 63 mm XF DAF Leaf spring Axle load 6,5 t Number of leaves 2/ Form L Width 80 mm Bushing rear 26/39 mm Bushing front 26/39 mm Installation location Position strength Length Thickness Camber Front axle 2 x 32 mm, plate 23 mm 900/900 mm 93 mm 2 mm XF DAF

36 36 Suspension and damping Leaf spring XF Number of leaves 2 Form 7 Width 80 mm Bushing rear 32/49 mm Bushing front 32/49 mm Installation location Length Thickness Camber rear axle 900/820 mm 4 mm 30 mm XF05, XF95, 95XF DAF Leaf spring Axle load 0 t Number of leaves 6 Form 8W Width 90 mm Installation location Length Thickness Camber Rear Axle 780/780 mm 67 mm 34 mm 95XF DAF Bearing for leaf spring Length 220 mm Width 35 mm Height 205 mm Number of holes 4 XF05, XF95, 95XF DAF Spring bushing This fi gure corresponds to suitable for Length Outer Inner Material Comparative no. XF05, XF95 52,5 mm 3 mm 26 mm Brass DAF XF05, XF95 75,5 mm 39 mm 3/35 mm steel DAF

37 Axles and steering 37 Drag-link Installation location Version Length Cone- Pipe front adjustable on one side 99 mm 30 mm 50 mm XF XF05, XF Lemförder Drag-link Installation location Installation side Length Cone- Pipe front left, longitudinal 005 mm 26 mm 52 mm (Illustration similar) XF95, 95XF Lemförder Drag-link with accessories (Illustration similar) suitable for Version Length Cone- Pipe Comparative no. XF05, XF95 adjustable on one side 000 mm 30 mm 52 mm Lemförder XF05, XF95 adjustable on one side 004 mm 30 mm 52 mm Lemförder XF05, XF95 not adjustable 952 mm 30 mm 42 mm Lemförder XF05 adjustable on one side 25 mm 30 mm 30 mm Lemförder XF95, 95XF 588 mm 26 mm 38 mm Lemförder XF95, 95XF adjustable on one side 998 mm 26 mm 36 mm Lemförder Drag-link Version adjustable on one side with accessories This fi gure corresponds to suitable for Length Cone- Pipe Comparative no. XF05, XF95 99 mm 30 mm 50 mm TRW JTR4283 XF05, XF mm 30 mm 38 mm TRW JTR0207 XF95, 95XF 005 mm 26 mm 52 mm TRW JTR004

38 38 Axles and steering XF Ball joint for drag link/track rod Installation location front axle Length 20 mm Cone- 30 mm Outer thread M30 x,5 suitable for Threadtype Comparative no. XF Euro 6, XF05 left-hand thread Lemförder XF Euro 6, XF05 right-hand thread Lemförder Ball joint for drag link/track rod Installation location front axle Length 5 mm Cone- 26 mm Outer thread M30 x,5 (Illustration similar) suitable for Installation side Threadtype Comparative no. XF05, XF95, 95XF left left-hand thread Lemförder XF05, XF95, 95XF right right-hand thread Lemförder Ball joint for drag link/track rod Installation location front axle Length 5 mm Cone- 26 mm Outer thread M30 x,5 (Illustration similar) suitable for Installation side Threadtype Comparative no. XF05, XF95, 95XF left left-hand thread Lemförder XF05, XF95, 95XF right right-hand thread Lemförder Ball joint PROEQUIP, for steering rod/track rod Installation location front axle Length 20 mm Cone- 30 mm Outer thread M30 x,5 suitable for Installation side Threadtype Comparative no. XF05, XF95, 95XF left left-hand thread TRW JTE4002 XF05, XF95, 95XF right right-hand thread TRW JTE400

39 Axles and steering 39 Ball joint Length 95 mm Cone- 30 mm Inner thread M22 x,5 Threadtype right-hand thread Control on steering cylinder XF XF05, XF Lemförder Ball joint Length 80 mm Cone- 30 mm Outer thread M22 x,5 Threadtype right-hand thread with accessories Control on steering cylinder XF05, XF95, 95XF Lemförder Ball joint for steering rod Installation location front axle Inner thread M24 x,5 Threadtype right-hand thread suitable for Length Cone- Comparative no. XF05, XF95 20 mm 30 mm Lemförder XF 5 mm 26 mm Lemförder Ball joint for drag link/track rod Form offset Length 45 mm Cone- 30 mm Outer thread M30 x,5 XF Lemförder

40 40 Axles and steering XF Ball joint for drag link/track rod Installation location front axle Length 4 mm Cone- 26 mm Outer thread M30 x,5 Threadtype right-hand thread with accessories XF95, 95XF Lemförder Ball joint for track rod Length 4 mm Cone- 26 mm Outer thread M30 x,5 Threadtype right-hand thread with accessories 95XF, 95XF TRW JTE032 Ball joint PROEQUIP X-Cap, for track rod Outer thread M30 x,5 Threadtype right-hand thread with accessories This fi gure corresponds to suitable for Length Cone- Comparative no. XF Euro 6, XF05, XF95, 95XF 22 mm 30 mm TRW JTE4078 XF05, XF95, 95XF 7 mm 26 mm TRW JTE3533 Steering Track Rod Installation location front axle Length 698 mm Cone- 26 mm This fi gure corresponds to suitable for Version Pipe Comparative no. XF05, XF95, 95XF guide rod, adjustable on both sides 40 mm Lemförder XF05, XF95, 95XF guide rod, adjustable on one side 52 mm Lemförder

41 Axles and steering 4 Steering Track Rod PROEQUIP Installation location front axle This fi gure corresponds to XF suitable for Length Cone- Pipe Comparative no. XF05, XF95, 95XF 698 mm 26 mm 52 mm TRW JTR00 XF mm 30 mm 40 mm TRW JTR070 XF mm 30 mm 40 mm TRW JTR4285 XF mm 30 mm 52 mm TRW JTR066 Steering Track Rod Installation side centre Version guide rod, adjustable on both sides Length 698 mm Cone- 26 mm Pipe 40 mm with accessories XF05, XF95, 95XF Lemförder Steering Track Rod Version adjustable on both sides Pipe 40 mm suitable for Installation location Length Cone- Comparative no. XF05, XF95, 95XF front axle 646 mm 26 mm Lemförder XF05, XF95 rear axle 690 mm 30 mm Lemförder Screw for tracking adjustment Inner thread M30 x,5 Outer thread M38 x,5 Length 93 mm Comparative no Lemförder

42 42 Axles and steering XF Power-steering pump Rate of delivery 9 dm³ Version hydraulic suitable for Pressure Comparative no. XF95, 95XF 80 bar LuK XF 50 bar LuK 'A' frame Installation location Length Bore hole Pipe Distance between holes rear axle 609 mm 23 mm 48 mm 52 mm XF Euro 6, XF05, XF95, 95XF Lemförder 'A' frame Installation location Length Bore hole Pipe Distance between holes rear axle 609 mm 23 mm 48 mm 52 mm XF Euro 6, XF05, XF95, 95XF DAF 'A' frame Installation location Length Bore hole Pipe Distance between holes rear axle 550 mm 23 mm 58 mm 52 mm XF05, XF95, 95XF DAF

43 Axles and steering 43 Repair kit for "A" frame XF XF05, XF95, 95XF Lemförder Repair kit for "A" frame Installation location Length Thickness Distance between centres Bore hole rear axle 95 mm 24 mm 52 mm 23 mm 95XF DAF Repair kit for "A" frame This fi gure corresponds to XF, XF95, XF TRW JRK XF TRW JRK0027 Trailing arm PROEQUIP Installation location Bearing version Length Pipe Bore hole Distance between holes Front axle Molecular bearing 605 mm 48 mm 2/2 mm 30/30 mm XF Euro 6, XF05, XF95, 95XF TRW JRR7023

44 44 Axles and steering XF Trailing arm Bearing version Length Pipe Bore hole Distance between holes molecular bearing 665 mm 46 mm 7/7 mm 5/5 mm XF05, XF Lemförder Trailing arm Bearing version Length Pipe Bore hole Distance between holes molecular bearing 600 mm 50 mm 2 mm 30 mm XF95, 95XF Lemförder Trailing arm Installation location Length Bore hole Pipe Distance between holes rear axle 390 mm 9/2 mm 50 mm 30/50 mm XF Euro 6, XF05, XF Lemförder Trailing arm Length Pipe Bore hole Distance between holes 390 mm 50 mm 9/2 mm 30/50 mm XF Euro 6, XF05, XF Wichmann Repair kit for trailing arm Bearing version Thickness Bore hole Distance between holes molecular bearing 24 mm 7 mm 5 mm XF05, XF95, 95XF Lemförder

45 Axles and steering 45 Repair kit for trailing arm Thickness Bore hole Distance between holes 24 mm 7 mm 5 mm XF XF05, XF95, 95XF DAF Repair kit for trailing arm Bore hole Distance between holes 2/2 mm 52 mm XF05, XF95, 95XF Lemförder Repair kit for trailing arm Installation location Outer Bore hole Distance between holes rear axle 72/65 mm 9 mm 30 mm XF05, XF95, 95XF Lemförder 73 0 Stabilizer mounting Installation side left/right This fi gure corresponds to suitable for Installation location Length Outer Inner XF Euro 6, XF05, XF95, 95XF front axle 50 mm 52/46,5 mm 6 mm XF Euro 6, XF05, XF95, 95XF front axle 60 mm 60 mm 20 mm XF Euro 6, XF05, XF95, 95XF rear axle 6 mm 83/93,5 mm 49 mm XF05, XF95, 95XF front axle 50 mm 46,5/5,5 mm 6,5 mm XF05, XF95, 95XF front axle 60 mm 70,5/62,5 mm 42,5 mm XF front axle/rear axle 60 mm 74/85 mm 5 mm

46 46 Axles and steering XF Repair kit for trailing arm Bearing version molecular bearing Thickness 24 mm Bore hole 7 mm Distance between holes 5 mm with retaining ring and distance sleeve XF05, XF95, 95XF Lemförder Kingpin kit Length 254 mm Outer 3,5 mm 2 x pins + fittings XF05, XF95, 95XF DAF Kingpin kit Length 272 mm Bolt- 32,5 mm 2 x pins and fittings XF95, 95XF DAF Shaft sealing ring for wheel hub Installation location Inner rear axle 25 mm This fi gure corresponds to suitable for Outer Comparative no. XF95, 95XF 60 mm DAF XF95, 95XF 60/90 mm DAF

47 Axles and steering 47 ABS ring Installation side left/right XF This figure corresponds to suitable for Installation location Inner Outer Thickness Comparative no. XF Euro 6, XF05, XF95 front axle 8 mm 48 mm 3,3 mm DAF XF Euro 6, XF05, XF95 front axle 38 mm 70 mm 3,3 mm DAF XF Euro 6, XF05, XF95 rear axle 68 mm 22 mm 8 mm DAF XF Euro 6, XF05, XF95 rear axle 68 mm 22 mm 8 mm DAF Wheel bolt Installation location front axle Outer thread M22 x,5 Head 42 mm Surface phosphated Property class 0.9 This figure corresponds to suitable for Thread length Length Comparative no. XF Euro 6, XF05, XF95, 95XF 42 mm 97 mm DAF 3099 XF Euro 6, XF05, XF95, 95XF 45 mm 85 mm DAF XF95, 95XF 42 mm 98 mm DAF Wheel nut Thread M8 x 2 Height 20 mm Surface galvanised Property class 0.9 suitable for XF95, 95XF Wheel nut Thread M22 x,5 Spanner size 32 mm This figure corresponds to suitable for Surface Height Comparative no. XF Euro 6, XF05 geometrized 26 mm DAF XF Euro 6, XF05 geometrised 62 mm DAF XF95 phosphated 30 mm DAF XF phosphated 25 mm DAF

48 48 Axles and steering XF Wheel nut with middle centering Thread M22 x,5 Height 27 mm Standard DIN 7436 Surface phosphated Spanner size 32 mm You'll find suitable wheel nut caps on page 249 Wheel hub Version with bearing This fi gure corresponds to XF Euro 6, XF05, XF DAF 826 XF Euro 6, XF05, XF DAF XF95, 95XF DAF Sealing ring for wheel hub Inner Thickness mm 5 mm XF Euro 6, XF05, XF95, 95XF DAF Lubricant sensor automatic, filled with special grease, transparent container for visual check, LED status display Type LAGD 25/HB2 Application range high temperatures and loads, pivot bearing Contents Comparative no. 25 ml DAF

49 Axles and steering 49 XF Tapered roller bearing suitable for Type Outer Inner Height Comparative no. XF05, XF mm 40 mm 33 mm SKF VKHB 2065 XF95, 95XF mm 50 mm 42,5 mm SKF VKHB 2070 XF95, 95XF mm 95 mm 39 mm SKF VKHB 2082 Tapered roller bearing suitable for Type Outer Inner Width Comparative no. XF05, XF mm 40 mm 32 mm SKF VKHB 2065 XF95, 95XF mm 80 mm 46 mm SKF VKHB 2232 XF95, 95XF mm 95 mm 39 mm SKF VKHB 2082 XF95, 95XF mm 00 mm 39 mm SKF VKHB 245 Wheel bearing This fi gure corresponds to suitable for Outer Inner Width Comparative no. XF Euro 6, XF05, XF95, 95XF 25 mm 70 mm 4 mm FAG H95 XF Euro 6, XF05, XF95, 95XF 38 mm 82 mm 30 mm FAG H95 XF Euro 6, XF05, XF95, 95XF 48 mm 00 mm 35 mm FAG H95 XF Euro 6, XF05, XF95, 95XF 24,7 mm 70 mm 0 mm FAG H95

50 50 Braking system XF Brake caliper Version standardised Fastening axial Bearing version with steel cap Wheel size 22,5" Angle of brake chamber centre line to axis of axle: 0 without brake bracket and linings This figure corresponds to suitable for Type Comparative no. XF Euro 6, XF05 SN7205RC Knorr K XF Euro 6, XF05 SN725RC Knorr K XF Euro 6 SN7204RC Knorr K XF Euro 6 SN724RC Knorr K Accessories Description Pressure pad set, SN 6/7 XF Euro 6, XF Knorr K00603 Adjuster cap set, SN 5/6 XF Euro Knorr K Guide sealing set, SN 7 XF Knorr K Guide sealing set, SN 6/7 XF Knorr K Brake pad set Installation location Front axle/rear axle Brake system SB/SM 7 WVA no Coating length 247,5 mm Lining width 09,5 mm Lining thickness 30,00 mm with accessories suitable for Fig. XF Euro 6, XF05, XF95, 95XF XF95, 95XF specifically for short-distance use

51 Braking system 5 Brake pad set Version prepared for wear indicator Brake system SB 7000 WVA no , 29253, Coating length 248 mm Lining width 0 mm Lining thickness 30,00 mm XF XF Euro 6, XF Textar Brake pad set Version prepared for wear warning indicator Installation location Front axle/rear axle Brake system SB/SN7 Lining thickness 30 mm XF Euro Meritor MDP3087K Brake pad set Version with hold-down system Brake system SB/SN7 (ProTecS) WVA no Coating length 248 mm Lining width 0 mm Lining thickness 30 mm XF Euro Beral Brake disc Thickness Minimum thickness Outer with accessories 45 mm 37 mm 432 mm XF Euro 6, XF Knorr K034248K50 Suitable brake piston resetting tools available from EUROPART!

52 52 Braking system XF Slack adjuster Version automatic Bore hole 4 mm Number of holes Number of teeth 0 Toothed hub profile SAE /2" 0 C suitable for Form Distance between holes Fig. Comparative no. XF95 left offset -38 mm 40 mm Haldex 72523C XF95 left offset 38 mm 40 mm Haldex 72524C XF95 left offset -45 mm 65 mm Haldex 72538C XF95 left cropped 45 mm 65 mm Haldex 72539C Brake drum Inner 420 mm Hole circle 335 mm Hub 285,00 mm Number of holes 0 You'll find suitable brake spring pliers on page 279 suitable for Installation location Height Comparative no. XF95 front axle 228 mm DAF XF95 rear axle 288 mm DAF XF rear axle 288 mm DAF Brake lining set Brake drum 420 mm This fi gure corresponds to suitable for Installation location WVA no. Lining thickness Lining width Comparative no. XF95 Front axle/rear axle ,80 mm 50 mm Beral XF95 rear axle ,55 mm 200 mm Beral

53 Compressed air 53 Compressor Version water cooled Number of cylinders 2 Stroke 62/2 mm Capacity 352/9 cm³ XF XF WABCO Accessories Description O-ring Compressor Version water cooled Number of cylinders 2 Stroke 50 mm Capacity 442 cm³ Operating pressure max. 2,5 bar XF WABCO Accessories Description O-ring Air dryer Version 2-chamber system with integrated pressure regulator and heating Connection M22 x.5 Cut-off pressure 2±0,3 bar Opening pressure 4,5±2,5 bar Operating range,5+0,25 bar Operating pressure max. 3 bar Voltage 24 V XF WABCO Air dryer Thread M22 x,5 Opening pressure 3 bar Operating range 0,8+0,4/-0,0 bar Voltage 24 V XF Knorr II37663

54 54 Compressed air XF Air dryer Cut-off pressure Type 0,4 bar LA845 XF05, XF Knorr K04986N50 Air dryer Version with venting silencer and time switch, without integrated silencer Connection flange/m22 x,5 Switch-on pressure 8,8 bar Cut-off pressure 0,4 bar Opening pressure 3 bar Voltage 24 V Heating connection: bayonet ISO 570 A-2...Ag/K3 XF05, XF Knorr K0498N50 Air dryer cartridge Version with oil trap Height 65 mm Thread M4 x,5 XF Knorr K Air dryer cartridge Dries and cleans compressed air, uses a highly effective, proven drying agent Threadtype right-hand thread Operating pressure max. 4 bar Thread M4 x,5 Height 35 mm Application range Suitable for all air dryer types with standard screw-on cartridge connection Complete with sealing rings XF Knorr II4300F

55 Compressed air 55 Air dryer cartridge Outer 40 mm Operating pressure 4 bar Thread M39 x,5 Height 65 mm XF XF Knorr II4000F Air dryer cartridge Version with oil separator (OSC) Operating pressure 4 bar Thread M39 x,5 Threadtype right-hand thread Height 65 mm XF Knorr K Air dryer cartridge Air System Protector PLUS (ASP-PLUS) Coalescence filter before and after the drying agent, optimal fi lter performance, best protection thanks to innovative technology, 50% extended replacement interval (3 years recommended duty cycle under normal conditions), reduced service requirement, fewer repair-based downtimes Connection thread M39 x,5 Threadtype Right-hand thread Operating pressure 4 bar Application range suitable for all vehicles, particularly suitable for vehicles with high air consumption Comparative no WABCO Air dryer cartridge ASP (Air System Protector) new drying agent cartridge with improved oil precipitation thanks to integrated coalescence fi lter for precipitating the tiniest of oil drops, based on tried and trusted WABCO technology Version with coalescing filter Operating pressure 4 bar Connection thread M39 x,5 Threadtype right-hand thread Easy to retrofit as a replacement for standard drying agent cartridge. 95XF WABCO

56 56 Compressed air XF Air dryer cartridge Version with coalescence fi lter Threadtype right-hand thread Operating pressure max. 3 bar Connection thread M4 x.5 XF Euro 6, XF05, XF WABCO Air dryer cartridge as replacement Operating pressure 4 bar Connection thread M39 x.5 Replacement for WABCO XF95, 95XF WABCO Air dryer cartridge Operating pressure 3 bar Connection thread G /4" Spanner size 30 mm Must not be used on vehicles that have the WABCO FuelGuard (E-APU) system installed, because the cartridge does not have available the necessary oil separation function. XF95, 95XF WABCO Muffler Version Snap connection Comparative no Knorr II4063F

57 Compressed air 57 Four-circuit protection valve with safety venting in spring accumulator circuit, controlled through circuit Connection thread M22 x.5/m6 x.5 Opening pressure 2-22, 24: 6,5 bar 23: 7 bar Closing pressure 2-22, 24: 6,5 bar 23: 7 bar XF XF05, XF Knorr II37464N50 Four-circuit protection valve with safety venting in spring actuator circuit, controlled through circuit, series connection (internal) of circuits and 2 to 3 and 4 Connection thread M22 x,5 Opening pressure 2-22, 24: 6,5 bar 23: 7 bar Closing pressure 2-22, 24: 6,5 bar 23: 7 bar XF Knorr II37462 ABS pressure control valve Connection 2 x VOSS NG2 M22 x,5 Version without relay function Voltage 24 V XF05, XF Knorr K038438N50 Pressure control valve Connection electric, bayonet (DIN)72585 Connection thread M22 x.5 JED-388 Operating pressure max. bar Voltage 24 V XF05, XF WABCO Accessories Description Comparative no. Adapter cable WABCO

58 58 Compressed air XF Blowoff valve Limiting pressure 0,5 +0,/-0,2 bar Inlet pressure 2 bar XF05, XF WABCO Blowoff valve XF WABCO Foot brake valve Operating pressure 0 bar Version without micro switch and tread plate Thread 4 x M22 x,5 XF Knorr II36045N50 Hand brake valve Operating pressure max. 8 bar Connection lateral, M6 x,5 N064-NG8 Version with control position, without bus stop brake, microswitch or emergency release 2nd circuit acting indirectly, ventilation connection for hose or pipe of 4 mm diameter XF Knorr DPM90DA

59 Compressed air 59 Brake signal transmitter Operating pressure 3 bar XF XF WABCO Brake signal transmitter Connection 4 x M22 x.5 Thread VOSS, Typ 3 Version with muffler Operating pressure 0 bar XF05, XF WABCO EBS axle modulator Operating pressure max. 5 bar Thread M22 x,5 XF05, XF WABCO EBS axle modulator Version tractor unit, FT 4 2, without redundancy valve XF05, XF WABCO

60 60 Compressed air XF EBS trailer control valve Version connector, horizontal Operating pressure max. 8.5 bar XF05, XF WABCO Solenoid valve for VOSS 230 Connection thread M6 x,5 Operating pressure max. 0 bar Version venting Connection electric, bayonet (DIN) Protection class IP69K/IP67 Voltage 24 V XF WABCO Solenoid valve 3/2 way Connection thread M2 x,5 Operating pressure - bar Version ventilated Connection electric, bayonet (DIN) Protection class IP6K6/IP6K9K Voltage 24 V XF Euro 6, XF05, XF WABCO ALB controller Connection M22 x.5/m6 x.5 VOSS Version pneumatic Operating pressure max. 3 bar Control pressure 0,5-5,9 bar XF WABCO

61 Compressed air 6 ALB controller Connection M22 x.5 VOSS 230 control range from 0,8 ± 0,2 bar XF XF WABCO ABS relay valve Connection thread 2 x M22 x,5/ x M6 x,5 Version with silencer Operating pressure 3 bar Height 0 mm Width 04 mm 95XF Knorr AC574AXY Relay valve Connection -2 M22 x,5 Connection 3 M6 x,5 only for spring brake chamber circuit XF Euro 6, XF Knorr AC577A Relay valve Version proportional relay valve Operating pressure 0 bar Connection -2 M22 x,5 Connection 4 M6 x,5 Thread VOSS 232 XF05, XF WABCO Relay valve Connection VOSS plug-type connection Connection -2 M22 x,5 Connection 4 M6 x,5 Operating pressure max. 0 bar Temperature range -40 to +80 C 95XF WABCO

62 62 Compressed air XF 3/2-way valve Stroke 2,5 mm Connection thread M0 x with hexagonal nut M26 x,5 XF05, XF WABCO /2-way valve Version aerating Operating pressure max. bar Connection thread M2 x,5 XF WABCO Quick-release valve Connection M22 x.5 Connection 2 M6 x,5 Connection 3 M22 x,5, with venting membrane XF Knorr Trailer control valve Thread M22 x,5 Type AC599A, VOSS XF95, 95XF Knorr AC599A Speed sensor with grease and clamping sleeve XF Knorr

63 Compressed air 63 Speed sensor set Cable length 400 mm Resistance 50 Ω with grease and clamp sleeve XF XF95, 95XF WABCO Speed sensor Length 230 mm XF05, XF WABCO Pressure sensor Connection M6 x.5, bayonet (DIN), DIN A-3. Operating pressure 6 bar Voltage 8-32 V resolution 400 mv/bar XF05, XF WABCO Membrane brake cylinder Connection M6 x,5 Version with fork head and disc seal Operating pressure 0 bar Type 24 Stroke 75 mm Length of piston rod 85 mm XF WABCO Piston brake cylinder Connection thread M6 x,5 Pin spacing 20,7 mm Stroke 57/57 mm Length of piston rod 5 mm Diaphragm size 24" XF05, XF Knorr II3408

64 64 Compressed air XF Combination brake cylinder Installation location rear axle Installation side left/right Connection M22 x,5 VOSS NG2/M22 x,5 VOSS NG2 Type 27/30 Stroke 64/64 mm Length of piston rod 300 mm Piston rod thread M6 x,5 Type number BZ9559 Application range Vehicles with S-cam brake XF Knorr II37098 Combination brake cylinder Connection M22 x,5 Type 24/24 IBV Operating pressure max. 0,2/8.5 bar Stroke 64/64 mm Length of piston rod 5 mm Release pressure 6, bar suitable for Installation side Comparative no. XF Euro 6, XF05, XF95 left WABCO XF Euro 6, XF05 right WABCO Combination brake cylinder Connection M22 x,5 Type 24/24 IBV Operating pressure max. 0.2/8.5 bar Stroke 65/64 mm Length of piston rod 5 mm Release pressure 6, bar Application range vehicles with disc brake XF Euro 6, XF WABCO Combination brake cylinder Connection M22 x.5 Type 24/24 IBV Operating pressure max. 0.2/8.5 bar Stroke 64/64 mm Length of piston rod 5 mm Release pressure 6, bar Application range vehicles with disc brake XF Euro 6, XF05, XF WABCO

65 Compressed air 65 Coupling head automatic Version with valve Connection thread M6 x,5 This fi gure corresponds to XF suitable for Colour Comparative no. XF05, XF95 red WABCO XF05, XF95 yellow WABCO Coupling head Version self-sealing Connection M6 x,5 suitable for Type Colour Comparative no. XF05, XF95, 95XF KU424 red Knorr K00423 XF05, XF95, 95XF KU428 yellow Knorr K ECAS path sensor Connection Bayonet DIN A-2.-Sn/K2 Version with lever XF Euro 6, XF05, XF WABCO ECAS solenoid valve Operating pressure 5-3 bar Voltage 24 V XF05, XF WABCO

66 66 Compressed air XF ECAS solenoid valve Version with noise reducer, solenoid connection at top Installation location rear axle, tag axle Connection electric, 2 x bayonet DIN Connection thread M22 x.5, VOSS 230 Operating pressure max. 5-3 bar Protection class IP6K6K Voltage 24 V XF05, XF WABCO ECAS solenoid valve Operating pressure max. 5-3 bar Protection class IP6K9K Voltage 24 V XF05, XF95, 95XF WABCO Operating unit ECAS/ELM Version 9-pole Voltage 24 V connector version ID (Illustration similar) XF WABCO

67 Lighting and electrics 67 XF H7/H main headlamp Version with dipped beam, indicator, high beam, position and LED daytime running light Bulb type H7/H/P2W Voltage 24 V Application range for vehicles without headlight levelling and without headlight cleaning system with bulbs suitable for Installation side Comparative no. XF Euro 6 left HELLA ED XF Euro 6 right HELLA ED you'll find suitable bulbs starting on page 258 H7/H main headlamp Version with dipped beam, indicator, high beam and position light Bulb type H7/H/P2W/W5W Voltage 24 V with bulbs suitable for Installation side Application range Comparative no. XF05, XF95 left for vehicles without headlight levelling HELLA EJ XF05, XF95 right for vehicles without headlight levelling HELLA EJ XF05, XF95 left for vehicles with headlight levelling (electric) HELLA EJ XF05, XF95 right for vehicles with headlight levelling (electric) HELLA EJ Xenon headlamp Version with dipped beam, indicator, high beam and position light Bulb type D2S/H/PY2W/W5W Voltage 24 V Application range for vehicles with and without headlamp levelling (electric) without actuator for headlamp levelling and without ballast suitable for Installation side XF05, XF95 left XF05, XF95 right

68 68 Lighting and electrics XF H4 main headlamp Version with low beam and position lamp Bulb type H4/W5W Voltage 24 V Application range for vehicles with and without headlight levelling with bulbs suitable for Installation side Comparative no. 95XF left HELLA AG XF right HELLA AG You'll find ball joint separators on page 287 H fog light Bulb type H Voltage 24 V Design FF/Halogen Type flush-mounting Application range for vehicles with cornering lights with bulb suitable for Installation side Comparative no. XF Euro 6 left HELLA ND XF Euro 6 right HELLA ND H3 fog light Version Bulb type Voltage with bulbs with high beam H3/H3 24 V suitable for Installation side Comparative no. XF05 left HELLA PE XF05 right HELLA PE

69 Lighting and electrics 69 H fog light Version with main beam Bulb type H/H3 Voltage 24 V housing with headlamp insert and pre-fi tted bulbs, without frame XF suitable for Installation side Comparative no. XF95, 95XF left HELLA 9BG XF95, 95XF right HELLA 9BG Accessories Description Headlight frame, left Headlight frame, right Bracket for headlight Installation location front This fi gure corresponds to suitable for Installation side XF05, XF95 left XF05, XF95 right XF left XF right LED indicator light ICDL0 Version Bulb type Voltage Lens colour Type without bulb carriers PY2W 24 V clear Fitting/installation suitable for Installation side Comparative no. XF Euro 6 (0/203-) left Vignal 7000 XF Euro 6 (0/203-) right Vignal 700 Indicator light ICDL07 Installation location Installation side Bulb type Lens colour Type with bulb holder side left/right P2W yellow surface-mounting XF05, XF Vignal 0900

70 70 Lighting and electrics XF Indicator light Installation side left/right Bulb type P2W Voltage 24 V Lens colour clear Type surface-mounting with bulb and bulb holder 95XF HELLA 2BA End-outline marker lamp Version Installation location Installation side Bulb type Voltage Width Height Depth Lens colour Type with bulb holder with reflector front left/right W5W 2/24 V 0 mm 50 mm 8 mm clear surface-mounting approved for vehicles in accordance with GGVS/ADR XF05, XF Vignal Accessories This fi gure corresponds to Description Comparative no. Bulb holder, AMP JPT, 2-pin, with sealing ring Vignal Connection cable, AMP JPT, 2-pin Vignal End-outline marker lamp Installation location front Installation side left/right Bulb type W5W Voltage 2/24 V Width 40 mm Height 30 mm Depth 65 mm Lens colour clear XF Vignal

71 Lighting and electrics 7 LED side marker light Version with reflector Voltage 24 V Width 30 mm Height 32 mm Depth 8 mm Lens colour yellow XF XF Euro HELLA 2PS Side marker light Version Installation side Bulb type Voltage Width Height Depth Type with bulb holder with reflector left/right W5W 2/24 V 0 mm 50 mm 8 mm surface-mounting approved for vehicles in accordance with GGVS/ADR XF05, XF95, 95XF Vignal Accessories This fi gure corresponds to Description Comparative no. Bulb holder, AMP JPT, 2-pin, with sealing ring Vignal Connection cable, AMP JPT, 2-pin Vignal LED rear light Voltage 24 V Connection connector, lateral (8-pin) Pin spacing 60 mm Width 403,5 mm Height 59 mm Depth 92 mm approved for vehicles in accordance with ADR/GGVS suitable for Installation side Version Comparative no. XF Euro 6 left with indicator, stop, licence plate, rear fog, tail, reversing, side marker and clearance light, HELLA 2VD refl ector (full LED) XF Euro 6 right with indicator, stop, rear fog, reversing, tail, side marker and clearance light, refl ector (full LED) HELLA 2VP Accessories Description Comparative no. Lens, left/right HELLA 9EL

72 72 Lighting and electrics XF Indicator Version for LED lamps, type 2VD/2VP Voltage 24 V Number of poles 4 with bracket XF HELLA 4DW LED control unit Version for LED flashing light Voltage 24 V Number of poles 5 Comparative no HELLA 5DS LED rear light LC8 LED Voltage Connection Width Height Depth Pin spacing 24 V connector, lateral (HDSCS) 400 mm 60 mm 85 mm 60 mm This fi gure corresponds to suitable for Installation side Version Comparative no. XF Euro 6 (06/203-) left with indicator, brake, reversing, rear fog, tail, side marker and number plate light, Vignal 5750 refl ector XF Euro 6 (06/203-) right with indicator, brake, reversing, rear fog, tail, side marker, refl ector Vignal 5760 Accessories Description Comparative no. Lens, left/right Vignal Connecting plug, 8-pin Vignal D3878

73 Lighting and electrics 73 Rear light in hybrid technology Bulb type P2W/PY2W Voltage 24 V Lens colour red/clear Pin spacing 60 mm Width 400/49 mm Height 59 mm Depth 92 mm with bulbs XF suitable for Installation side Version Comparative no. XF Euro 6 (0/202-), left with indicator, stop, LED licence plate, rear fog, reversing, LED tail, HELLA 2VD XF05 (04/202-) LED side marker and LED clearance light, refl ector XF Euro 6 (0/202-), XF05 (04/202-) right with indicator, stop, rear fog, reversing, LED tail, LED side marker and LED clearance light, refl ector HELLA 2VP Accessories Description Comparative no. Lens, left/right HELLA 9EL Rear light Version with indicator, stop, license plate, rear fog, reversing, tail and clearance light, refl ector Installation side left/right Bulb type P2W/R5W Voltage 24 V Lens colour red/clear/yellow Connection central connector Pin spacing 52 mm Width 468 mm Height 30 mm Depth 84 mm with bulb holder approved for vehicles in accordance with GGVS/ADR XF05, XF HELLA 2VD

74 74 Lighting and electrics XF Rear light LC7 Bulb type P2W/R5W Voltage 24 V Lens colour red/clear/yellow Connection DIN round connector, rear Width 464 mm Height 30 mm Depth 83 mm Pin spacing 52 mm approved for vehicles in accordance with GGVS/ADR suitable for Installation side Version Comparative no. XF05, XF95, 95XF left/right with indicator, stop, rear fog, reversing, clearance, side marker and tail light, reflector XF05, XF95, 95XF left with indicator, brake, number plate, rear fog, reversing, side marker and tail light, reflector Vignal Vignal 6800 Accessories Description Lens, with reflector, left/right Rear light LC7 Voltage 24 V Lens colour red/clear/yellow Connection AMP.5, lateral Width 464 mm Height 30 mm Depth 83 mm Pin spacing 52 mm approved for vehicles in accordance with GGVS/ADR suitable for Installation side Version Comparative no. XF05, XF95 left with indicator, stop, licence plate, rear fog, reversing, side marker, tail and clearance light, reflector XF05, XF95 right with indicator, brake, rear fog, reversing, taillight and side marker light, reflector Vignal Vignal 6970 Accessories Description Comparative no. Lens, with reflector, left/right Vignal Connecting plug AMP.5, 7-pin, straight Vignal D868 Reversing alarm, left Vignal D2953

75 Lighting and electrics 75 Headlight bracket Installation location top Driver cab Super Space Cab Material V2A stainless steel Surface high-gloss polished 60 mm without headlamps may be mounted without TÜV certificate XF suitable for XF Euro 6, XF Headlight bracket Installation location Driver cab Material Surface without headlamps top Super Space Cab V2A stainless steel high-gloss polished 60 mm suitable for XF Euro 6, XF You'll find suitable headlamps on page 262 Headlight bracket Installation location top Driver cab Space Cab Material V2A stainless steel Surface high-gloss polished 60 mm without headlamps may be mounted without TÜV certificate suitable for XF Euro 6, XF05, XF Headlight bracket Installation location Material Surface without headlamps bottom V2A stainless steel high-gloss polished 60 mm suitable for XF05, XF95, 95XF

76 76 Lighting and electrics XF Headlight bracket Material V2A stainless steel Surface high-gloss polished 60 mm without headlamps suitable for XF You'll find suitable headlamps on page 262 Headlight bracket Material V2A stainless steel Surface high-gloss polished 60 mm with 4 white LEDs, fixings, without headlamps suitable for XF Euro Fastening clamp for headlight for mounting on the impact protection of light bar Material Stainless steel 60 mm Indicator switch Switch function indicate, horn, wash-wipe and light switch-over function Voltage 24 V Cable length 730 mm suitable for XF05, XF Indicator switch Switch function indicate, horn, light switch-over function Voltage 24 V Cable length 580 mm suitable for XF95, 95XF

77 Lighting and electrics 77 Starter Motor Voltage 24 V Power 5,5 kw Pinion teeth Flange 3-hole XF XF05, 95XF Prestolite M90R3543SE Starter Motor in exchange Voltage 24 V Power 5,5 kw Pinion teeth 2 Version 55, right Flange 3-hole XF Bosch Starter Motor in exchange Voltage 24 V Power 6,2 kw Pinion teeth Version 60, left Flange 3-hole XF95, 95XF Bosch Starter Motor in exchange Voltage 24 V Power 6,2 kw Pinion teeth Flange 3-hole 95XF Bosch

78 78 Lighting and electrics XF Alternator Voltage 24 V Charging current 55 A Version without belt pulley Flange 3-hole 95XF Bosch Alternator Voltage 24 V Charging current 80 A Version without belt pulley Flange 3-hole flange 95XF Bosch Alternator Voltage 24 V Charging current 80 A Version with belt pulley Flange 3-hole flange 95XF Bosch Alternator Voltage 24 V Charging current 00 A Version without belt pulley Flange 3-hole XF Bosch

79 Lighting and electrics 79 Alternator in exchange Voltage 24 V Charging current 80 A Version with pulley (poly V7) XF XF Bosch Alternator in exchange Voltage 24 V Charging current 0 A Version with pulley (poly V7) Flange 4-hole XF Bosch Generator regulator Voltage 24 V 95XF Prestolite Generator regulator Voltage 24 V suitable for 95XF

80 80 Bodywork Air deflector suitable for DAF XF Euro 6 XF Description Fig. right left Body parts suitable for DAF XF Euro 6 Description Fig. Headlamp trim, right Headlight frame, right Front grille, bottom Headlight frame, left Headlamp trim, left Headlamp beading for fog lamp, right Bumper Decorative cover, bottom Headlamp beading for fog lamp, left

81 Bodywork 8 XF Body parts suitable for DAF XF Euro 6 Description Fig. Door extension, right Entry, with wing, right Entry box, bottom, right Step-up, bottom, right Step-up, bottom, left Entry box, bottom, left Entry, with wing, left Door extension, left Skirting protection bracket suitable for DAF XF Euro 6 with TÜV certificate Version with lower hoop Material V2A stainless steel Surface high-gloss polished 76 mm Sidebar suitable for DAF XF Euro 6 Material stainless steel Surface high-gloss polished Wheelbase 3800 mm with 5 LEDs only fits together with the original side panel

82 82 Bodywork XF Wing, rear axle suitable for DAF XF Euro 6 Description Fig. Wing, front section, left Wing, front section, right Wing, centre section, left/right, 4 rubber tightening straps Wing, centre section, left/right, without rubber band clamps Wing, rear section, left Wing, rear section, right Support arm, offset, left/right Support arm, straight, left/right Wing bracket, left/right Clamping collar Silent block

83 Bodywork 83 XF Body parts suitable for DAF XF05 Description Fig. Wind deflector, front, right Side, front, right Front grille, top, centre Side, front, left Wind deflector, front, left Body parts suitable for DAF XF05 Description Fig. Headlamp trim, right Front grille, front, bottom Step-up for bottom front grille, left/right Headlamp trim, left Headlamp beading, front, right Bumper, front Step-up for bumpers Headlamp beading, front, left

84 84 Bodywork XF Gas spring for front flap Spring force Length 400 N 475 mm suitable for XF Body parts suitable for DAF XF05 Description Fig. Entry, right Entry box, right, white Entry box, right, dark grey Bracket for tread, right Step-up, top, left/right Step-up, centre, left/right Step-up, bottom, left/right Bracket for tread, left Entry box, left, dark grey Entry box, left, white Entry, left Cab mudguard suitable for DAF XF05 Version Installation location with antispray front axle Installation side right left

85 Bodywork 85 Sidebar suitable for DAF XF05 Material stainless steel Surface high-gloss polished with 5 LEDs XF Wheelbase 3600 mm mm Wing, rear axle suitable for DAF XF05 Description Fig. Wing, front/rear part, left/right Wing, centre section, left/right Tightening strap rubber Support arm, offset, left/right Clamping collar Body parts suitable for DAF XF95 Description Fig. Wind deflector, front, right Side, front, right Front grille, top, centre Side, front, left Wind deflector, front, left

86 86 Bodywork XF Body parts suitable for DAF XF95 Description Fig. Headlamp trim, right Front grille, bottom Step-up for bottom front grille, left/right Hinge for bottom front grille Cover plate, right Cover plate, left Headlamp trim, left Bumper bracket, right Console for bumpers Bumper bracket, centre Bumper bracket, left Headlight frame for fog lamp, right Bumper, front Step-up for bumpers Headlight frame for fog lamp, left Front spoiler

87 Bodywork 87 XF Body parts suitable for DAF XF95 Description Fig. Wing extension, right Door extension, right Entry, with wing, right Wing cover, right Entry box, bottom, right Bracket for tread, right Step-up, top, left/right Step-up, centre, left/right Step-up, bottom, left/right Bracket for tread, left Entry box, bottom, left Wing cover, left Entry, with wing, left Door extension, left Wing extension, left

88 88 Bodywork XF Tread set suitable for DAF XF95 Material Surface V2A stainless steel high-gloss polished Version 3-piece Wing, driver cab suitable for DAF XF95 Description Fig. Cab mudguard, front section, right Cab mudguard, rear section, right Wing bracket, right Wing bracket, left Cab mudguard, rear section, left Cab mudguard, front section, left

89 Bodywork 89 4 XF Wing, rear axle suitable for DAF XF95 Description Fig. Wing, front/rear part, left/right Wing, centre section, left/right Tightening strap rubber Support arm, offset, left/right Clamping collar Body parts suitable for DAF 95XF Description Fig. Wind deflector, left Side, left Front panel, top Front grille, top Side, right Wind deflector, right

90 90 Bodywork XF Body parts suitable for DAF 95XF Description Fig. Headlamp trim, right Front grille, bottom Step-up for bottom front grille, left/right Hinge for bottom front grille Cover plate, right Cover plate, left Headlamp trim, left Bumper bracket, right Console for bumpers Bumper bracket, centre Bumper bracket, left Headlight frame for fog lamp, right Bumper, front Step-up for bumpers Headlight frame for fog lamp, left Front spoiler

91 Bodywork 9 XF Body parts suitable for DAF 95XF Description Fig. Wing extension, right Door extension, right Entry, with wing, right Wing cover, right Entry box, bottom, right Bracket for tread, right Step-up, top, left/right Step-up, centre, left/right Step-up, bottom, left/right Bracket for tread, left Entry box, bottom, left Wing cover, left Entry, with wing, left Door extension, left Wing extension, left

92 92 Bodywork XF Tread set suitable for DAF 95XF Material Surface V2A stainless steel high-gloss polished Version 3-piece Wing, driver cab suitable for DAF 95XF Description Fig. Cab mudguard, front section, right Cab mudguard, rear section, right Wing bracket, right Wing bracket, left Cab mudguard, rear section, left Cab mudguard, front section, left

93 Bodywork 93 3 XF 2 4 Wing, rear axle suitable for DAF 95XF Description Fig. Wing, left/right Wing, centre section, left/right Support arm, offset, left/right Clamping collar Battery box cover with hinge and fastener suitable for XF Euro 6, XF Battery box cover suitable for XF05, XF Hinge for battery box suitable for XF

94 94 Cab XF Truck driver's seat 6860/875 NTS automatic weight adjustment with connection to the vehicle pneumatic system, with pressure permanently at least 7.5 bar, built-in 3-point safety belt system, adjustable upper belt diverter, height adjustment with memory function, seat back adjustment, shoulder adjustment, lean and horizontal settings, adjustable vertical movement damper, on/off horizontal springing, adjustable seat cushion depth, integrated pneumatic system (IPS) for adjustment of backrest to individual body contour (lumbar support and adjustable side support), rapid lowering, grey/anthracite seat covering with fi ne silver coloured stripes Version Standard, can be operated on the left Suspension pneumatic Track width 26 mm It is not permitted to use this item in vehicles with air bag systems, seat belt pretensioners and belt lock sensors! Armrests must be ordered separately. (Illustration similar) suitable for XF Accessories Description Version Arm rest, left Standard Arm rest, right Standard Arm rest, left Luxury with textile cover Arm rest, right Luxury with textile cover Truck driver's seat 6860/875 NTS automatic weight adjustment with connection to the vehicle pneumatic system, with pressure permanently at least 7.5 bar, built-in 3-point safety belt system, adjustable upper belt diverter, height adjustment with memory function, seat back adjustment, shoulder adjustment, lean and horizontal settings, adjustable vertical movement damper, on/off horizontal springing, adjustable seat cushion depth, integrated pneumatic system (IPS) for adjustment of backrest to individual body contour (lumbar support and adjustable side support), rapid lowering, grey/anthracite seat covering with fi ne silver coloured stripes Version Comfort, operable on the left, with seat air-conditioning Suspension pneumatic Track width 305 mm It is not permitted to use this item in vehicles with air bag systems, seat belt pretensioners and belt lock sensors! Armrests must be ordered separately. Not suitable for drivers < 75 cm! (Illustration similar) suitable for XF Accessories Description Version Installed console Arm rest, left Luxury with textile cover Arm rest, right Luxury with textile cover Arm rest, left Standard Arm rest, right Standard

95 Cab 95 Truck driver's seat Kingman High Performance air sprung, with external supply, spring defl ection 70 mm, height adjustment 00 mm, built-in headrest, length adjustment, longitudinal horizontal suspension, pneumatic lumbar support, backrest setting, built-in 3-point restraint system, quick lowering, side contour adjustment, seat angle adjustment, adjustable shock absorber, neck cushion with changeable cover, 2-stage seat heating, seat pillow depth setting Version Comfort Width 545 mm Depth 630 mm Track width 230 mm Illustration shows special equipment! Arm rests must be ordered separately. XF (Illustration similar) suitable for XF Accessories Description Arm rest, left Arm rest, right Filing table Colour black Installation side centre suitable for XF Euro Filing table Colour black Installation side centre suitable for XF Euro Filing table Colour black Installation side centre (Illustration similar) suitable for XF

96 96 Cab XF Filing table Colour black Installation side right suitable for XF Euro Filing table Colour black Installation side right suitable for XF Windscreen Width 2320 mm Height 770 mm suitable for Colour XF05 green XF white XF green Accessories Description rubber moulding glass rubber seal Door Width 65 cm Height 07 cm Depth 2 cm suitable for Version Installation side XF05, XF95, 95XF Driver's door left XF05, XF95, 95XF Passenger door right

97 Cab 97 Sunshade for cab Version without bracket Colour anthracite/grey complete with fittings XF suitable for 95XF Space Cab Sunshade for cab Version with bracket Material Resin Transfer Moulding (RTM) plastic complete suitable for XF95, 95XF Comfort Cab Wiper blade Length 550 mm with 2 adapters (Illustration similar) suitable for XF Euro 6, XF05, XF Wiper blade Visioflex Version Length with built-in wear warning contact, with spoiler 550 mm XF05, XF95, 95XF SWF Wiper blade suitable for Length Comparative no. XF95, 95XF 550 mm SWF 32.55

98 98 Cab XF Washer fluid pump Version Single pump, electric Voltage 24 V Rate of delivery 432 l/h Housing- 46 mm Pressure 2,5 bar Plug type Flat plug Pressure line connection mm Suction line connection 0.5 mm XF05, XF HELLA 8TW Washer fluid pump Version single pump, electric Voltage 24 V XF05, XF95, 95XF DAF Wiper motor Installation location front Voltage 24 V XF05, XF Valeo Wiper arm with washer nozzle suitable for XF Euro

99 Cab 99 Main mirror Installation side left/right Voltage 24 V Width 228 mm Height 4 mm Curve radius 200 mm Assembly- 40 mm Material ABS Test mark II e 03*0007 with cover XF suitable for Version Comparative no. XF Euro 6, XF05, XF95 heated, manual adjustment Mekra H XF Euro 6, XF05, XF95 heated, electric adjustment Mekra Accessories Description Comparative no. Glass unit Mekra H Cover for main mirror Mekra H Cover for retaining support, bottom, left Mekra H Cover for retaining support, bottom, right Mekra H Adapter cable Mekra Mounting bracket, outside mirror, 920 x 40 mm, left Mekra Mounting bracket, outside mirror, 920 x 40 mm, right Mekra Mounting bracket, outside mirror, 88 x 40 mm, left Mekra Mounting bracket, outside mirror, 88 x 40 mm, right Mekra Main mirror Installation side Voltage Width Height left/right 24 V 205 mm 384 mm complete, with 2-pole heating cable Curve radius 800 mm Assembly- 28 mm Test mark II e 0*0423 suitable for Version Comparative no. 95XF heated, manual adjustment Mekra H 95XF heated, electric adjustment Mekra H Accessories Description Comparative no. Glass unit Mekra H Cover Mekra H

100 00 Cab XF Wide angle mirror Voltage 24 V Height 239 mm Curve radius 300 mm Assembly- 40 mm Test mark IV e 03*0008 suitable for Installation side Version Width Comparative no. XF05, XF95 left/right heated, manual adjustment 22 mm Mekra H XF Euro 6*, XF05, XF95 left/right heated, electric adjustment 22 mm Mekra XF Euro 6 right heated, electric adjustment 243 mm Mekra *only suitable for installation on the left-hand side Accessories Description Comparative no. Glass unit, left/right* Mekra H Glass unit, right (XF Euro 6) Mekra Cover, left/right* Mekra.570.0H Cover, right (XF Euro 6) Mekra Adapter cable Mekra Wide angle mirror Version heated Installation side left/right Voltage 24 V Width 70 mm Length 29 mm Curve radius 400 mm Material plastic with adapter cable suitable for XF95, 95XF Accessories Description Mirror glass

101 Cab 0 Wide angle mirror Installation side left/right Voltage 24 V Width 36 mm Height 209 mm Curve radius 300 mm Assembly- 28 mm Material ABS Test mark IV e 03*004 XF suitable for Version Comparative no. 95XF heated, manual adjustment Mekra H 95XF heated, manual adjustment, for heating cable (2-core, round angled connector) Mekra Accessories Description Comparative no. Glass unit Mekra H Cover Mekra H Wide angle mirror Version heated, manual adjustment Installation side left/right Voltage 24 V Width 70 mm Height 29 mm Curve radius 300 mm Assembly- 28 mm Material ABS Test mark IV e 02*0424 with cover 95XF Mekra H Accessories Description Comparative no. Glass unit Mekra H Cover Mekra H

102 02 Cab XF Wide angle mirror Version heated, manual adjustment Installation side left/right Voltage 24 V Width 70 mm Height 29 mm Curve radius 400 mm Assembly- 28 mm Material ABS Test mark IV e 02*0424 with cover 95XF Mekra H Accessories Description Comparative no. Glass unit Mekra H Cover Mekra H Front mirror Version with mirror arm, manual adjustment Installation side right Curve radius 240 mm Test mark IV e 03*096 suitable for Width Height Comparative no. XF Euro 6, XF05, XF mm 4 mm Mekra H XF Euro 6, XF05, XF mm 007 mm Mekra H Front mirror Version without mirror arm, manual adjustment Width 65 mm Height 256 mm Curve radius 240 mm Test mark IV e 03*096 XF Euro 6, XF05, XF Mekra Accessories Description Comparative no. Cover for mirror arm Mekra H

103 Cab 03 Ramp mirror Version manual adjustment Installation side right Width 24 mm Height 326 mm Curve radius 300 mm ECE-R46/04 approval XF XF Euro 6, XF05, XF Mekra Ramp mirror Version unheated, manual adjustment Installation side right Width 87 mm Height 39 mm Curve radius 300 mm Test mark V/VI e 03*0033 XF Euro 6, XF05, XF Mekra H Window winder Version electric suitable for Installation side XF05, XF95, 95XF left XF05, XF95, 95XF right Side window wind deflector Version slot-type (Illustration similar) suitable for XF Side window wind deflector made of smoke-coloured plexiglass, no draught, less window soiling Version slot-type suitable for XF95, 95XF

104 04 Cab XF Driver cab tilting pump Version manual Outer thread M2 x,5/ M4 x,5 This fi gure corresponds to suitable for Number of connections XF05, XF XF Driver cab tilt cylinder 50 mm This fi gure corresponds to suitable for Length Bore hole XF05, XF95 86 mm 25 mm XF mm 24 mm Heat exchanger for interior heating Version screwed on Length 370 mm Width 89 mm Depth 42 mm Application range for vehicles with and without headlight levelling XF95, 95XF HELLA 8FH Heat exchanger for interior heating Length Width Depth 370 mm 90 mm 43 mm (Illustration similar) XF05, XF DAF

105 Cab 05 Air-conditioning compressor Voltage 24 V Number of ribs Pulley 33 mm XF XF05, XF95, 95XF HELLA 8FK Air-conditioning compressor Manufacturer's restriction Sanden Voltage 24 V Pulley 40 mm Number of ribs 7 (Illustration similar) XF DAF 8558 Condenser for air-conditioning systems without dryer This fi gure corresponds to suitable for Length Width Depth Comparative no. XF05, XF mm 540 mm 7 mm HELLA 8FC XF 500 mm 537 mm 6 mm HELLA 8FC Condenser for air-conditioning Length 60 mm Width 470 mm Depth 22 mm without dryer 95XF DAF

106 06 Cab XF Filter dryer XF05, XF95, 95XF HELLA 8FT Filter dryer XF05, XF HELLA 8FT Expansion valve XF05, XF HELLA 8UW Expansion valve XF95, 95XF HELLA 8UW Interior fan Voltage 24 V Power 300 W Application range for vehicles with standard heating (Illustration similar) XF95, 95XF HELLA 8EW

107 Cab 07 Electrical ballast for interior blower Voltage 24 V XF XF05, XF HELLA 9ML Cabin filter Filter type Pollen filter XF Euro 6, XF05, XF95, 95XF Hengst E944LI MANN CU 332 Cabin filter Filter type Pollen filter XF Euro 6, XF05, XF95, 95XF Hengst E944LI Cab damper with coil spring Installation location Fastening Version Length front eye/pin oil pressure, twin-tube system mm (Illustration similar) XF05, XF95, 95XF DAF

108 08 2

109 09 2 CF Engine Drivetrain Suspension and damping Axles and steering Braking system Compressed air Lighting and electrics Bodywork Cab

110 0 Engine 2 CF Engine Parts suitable for engine type MX-3 (Euro 6), installed in DAF CF Euro 6 Description Version Number per engine Crankshaft seal front Crankshaft seal rear Cylinder head gasket Cylinder head screw set Main bearing pair standard Oil pan gasket Stop disc set standard Valve cover gasket Engine Parts suitable for engine type MX- (Euro 6), installed in DAF CF Euro 6 Description Version Number per engine Crankshaft seal front Crankshaft seal rear Cylinder head gasket Oil pan gasket Engine Parts suitable for engine type 290 XE, MX 05 (Euro 5, EEV), installed in DAF CF85 Description Version Number per engine Crankcase seal set Crankshaft seal front Crankshaft seal rear Cylinder head gasket set Cylinder head screw set Cylinder liner, without seal wet Cylinder liner end seal set Main bearing pair standard Oil pan gasket Piston ring set set per piston Stop disc set standard Engine Parts suitable for engine type PR (Euro 5), installed in DAF CF85, CF75 Description Version Number per engine Crankcase seal set Crankshaft seal front Crankshaft seal rear Cylinder head gasket set Oil pan gasket

111 Engine Engine Parts suitable for engine type GR (Euro 5), installed in DAF CF65 Description Version Number per engine Crankshaft seal front Crankshaft seal rear Cylinder head gasket set Inlet valve Oil pan gasket Output valve Valve cover gasket set CF Engine Parts suitable for engine type 260 XE (Euro 3), installed in DAF CF85 Description Version Number per engine Connecting rod bearing pair standard Crankcase seal set Crankshaft seal front Crankshaft seal rear Cylinder head gasket set Cylinder head screw M6, 46 mm Cylinder head screw M2, 40 mm Cylinder liner dry Main bearing set standard Oil pan gasket Piston ring set set per piston Piston with pin and rings XE 35 C, x valve seat pocket Piston with pin and rings XE 35 C, 3 x valve seat pocket Piston with pin and rings XE 355 C, 3 x valve seat pocket Stop disc set standard Engine Parts suitable for engine type 260 XE (Euro 3), installed in DAF 85CF Description Version Number per engine Connecting rod bearing set standard Crankcase seal set Crankshaft seal front Crankshaft seal rear Cylinder head gasket set ZKD soft material Cylinder head gasket set Cylinder head screw M6, 46 mm Cylinder head screw M2, 40 mm Cylinder liner dry Main bearing set standard Oil pan gasket Piston ring set set per piston Piston with pin and rings Stop disc set standard

112 2 Engine 2 CF Engine Parts suitable for engine type PE (Euro 3), installed in DAF CF75 Description Version Number per engine Crankcase seal set Crankshaft seal front Crankshaft seal rear Cylinder head gasket set Cylinder head screw M6, 46 mm Cylinder head screw M2, 40 mm Cylinder liner dry Oil pan gasket Engine Parts suitable for engine type 260 XF (Euro 2), installed in DAF 85CF Description Version Number per engine Connecting rod bearing set standard Crankcase seal set Crankshaft seal front Crankshaft seal rear Cylinder head gasket set ZKD soft material Cylinder head screw M6, 46 mm Cylinder head screw M2, 40 mm Cylinder liner dry Main bearing set standard Oil pan gasket Piston with pin and rings Stop disc set standard Engine Parts suitable for engine type PF (Euro 2), installed in DAF 75CF Description Version Number per engine Crankcase seal set Crankshaft seal front Crankshaft seal rear Cylinder head gasket set Cylinder head screw M6, 46 mm Cylinder head screw M2, 40 mm Cylinder liner dry Oil pan gasket Piston ring set set per piston Piston with pin and rings

113 Engine 3 Central silencer Standard Euro 4/5 2 CF CF85, CF Dinex 244 Accessories suitable for DAF CF85 Description Comparative no. Clamping piece, Inner 27 mm Dinex Exhaust pipe clamp, Inner 27 mm Dinex 2850 Flexible pipe, Length 650 mm Dinex 2268 Front pipe, Length 46 mm Dinex 2275 Rear silencer Dinex 2450 Rear silencer Dinex 2452 Tailpipe, Length 696 mm Dinex 2260 Tailpipe, Length 825 mm Dinex 2632 Central silencer Standard Euro 3 CF85, CF Dinex 2388 Accessories suitable for DAF CF85 Description Comparative no. Clamping piece, Inner 27 mm Dinex Exhaust pipe clamp, Inner 27 mm Dinex 2850 Front pipe, Length 980 mm Dinex 2245 Pipe clip, 30,5 mm Dinex Tailpipe, Length 544 mm Dinex 2704

114 4 Engine 2 Central silencer Standard Euro 3 CF CF85, CF75, CF Dinex 2488 Accessories suitable for DAF CF85 Description Comparative no. Clamping piece, Inner 27 mm Dinex Exhaust pipe clamp, Inner 27 mm Dinex 2850 Front pipe, Length 027 mm Dinex 2253 Half pipe clamp Dinex 2847 Pipe clip, 30,5 mm Dinex suitable for DAF CF65 Description Comparative no. Clamping piece, 0,6/2 mm Dinex Clamping piece, mm Dinex Exhaust pipe clamp, Inner 0 mm Dinex 287 Exhaust pipe clamp, Inner 27 mm Dinex 2850 Front pipe Dinex 2256 Half pipe clamp Dinex 2847 Central silencer Standard Euro 3 CF85, CF Dinex 23 Accessories suitable for DAF CF85 Description Comparative no. Clamping piece, Inner 27 mm Dinex Exhaust pipe clamp, Inner 27 mm Dinex 2850 Front pipe, Length 980 mm Dinex

115 Engine 5 Central silencer Standard Euro 3 2 CF CF Dinex 2343 Accessories suitable for DAF CF85 Description Comparative no. Clamping piece, Inner 27 mm Dinex Exhaust pipe clamp, Inner 27 mm Dinex 2850 Front pipe, Length 027 mm Dinex 2253 Front pipe, Length 980 mm Dinex 2245 Half pipe clamp Dinex 2847 Pipe clip, 30,5 mm Dinex Tailpipe, Length 650 mm Dinex 2723 Tailpipe, Length 544 mm Dinex 2704 Central silencer Standard Euro 3 CF85, CF Dinex 2496 Accessories suitable for DAF CF85 Description Comparative no. Clamping piece, Inner 27 mm Dinex Exhaust pipe clamp, Inner 27 mm Dinex 2850 Front pipe, Length 980 mm Dinex 2245 Half pipe clamp Dinex 2847 Intermediate pipe, Length 956 mm Dinex 2259 Pipe clip, 30,5 mm Dinex Protective plate Dinex 2846 Tailpipe, Length 820 mm Dinex 2736

116 6 Engine 2 CF Exhaust turbocharger in exchange (Illustration similar) CF Garrett CF Garrett S 85CF Garrett CF Garrett CF Garrett CF Garrett Exhaust turbocharger in exchange This fi gure corresponds to CF BorgWarner CF BorgWarner CF BorgWarner Charging pressure sensor CF85, CF75, CF Bosch Charging pressure sensor CF85, CF75, 85CF Bosch Charge air hose Outer 9 mm Inner 97 mm Length 75 mm CF85, CF DAF

117 Engine 7 Engine radiator Length 950 mm Width 620 mm Depth 52 mm 2 CF CF HELLA 8MK Coolant temperature sensor Version threaded, with seal Spanner size 9 mm Thread M4 x,5 CF85, CF HELLA 6PT Fan wheel Outer 704 mm Number of blades 8 without clutch CF85, CF75, CF65, 85CF, 75CF, 65CF HELLA 8MV Fan wheel Outer 725 mm Number of blades 8 without clutch CF85, CF75, 85CF HELLA 8MV Fan wheel Outer 720 mm Number of blades without clutch CF HELLA 8MV

118 8 Engine 2 CF Fan wheel Outer 760 mm Number of blades without clutch CF HELLA 8MV Fan wheel Outer 750 mm Number of blades without clutch CF HELLA 8MV Radiator fan coupling without fan Version Outer thermal 233 mm CF HELLA 8MV Radiator fan coupling without fan Version Outer electronic 260 mm CF85, 85CF HELLA 8MV Radiator fan coupling without fan Version Outer electronic 275 mm CF HELLA 8MV

119 Engine 9 Radiator fan coupling without fan Version Outer electronic 275 mm (Illustration similar) 2 CF CF HELLA 8MV Radiator fan coupling without fan Version Outer thermal 203 mm CF75, 75CF HELLA 8MV Radiator fan coupling without fan Version thermal suitable for Outer Comparative no. CF85, CF mm DAF CF mm DAF CF85 63 mm DAF Water pump Length 320 mm Width 240 mm Thickness 70 mm with gaskets 85CF, 75CF DAF

120 20 Engine CF Water pump with gasket suitable for Impeller- Fig. Comparative no. CF Euro 6, CF65, 65CF 35 mm DAF CF75, 75CF 35 mm DAF CF 35 mm DAF CF 0 mm DAF Water pump Impeller- 35 mm CF DAF Water pump seal CF85, 85CF DAF

121 Engine 2 Oil filter This figure corresponds to suitable for Filter type Comparative no. CF Euro 6, CF85 Filter insert Hengst E89HD23 MANN HU 2 03 x Knecht/Mahle OX 434D CF85, CF75, 85CF Centrifuge Hengst Z2 D64 MANN ZR 903 x Knecht/Mahle OZ 5D 85CF Screw-on filter Hengst H300W02 MANN W 3 45/6 CF Oil filter This figure corresponds to suitable for Filter type Comparative no. CF Euro 6, CF85 Filter insert Hengst E89H D23 CF Euro 6, CF85 Centrifuge Hengst Z6 D83 CF Euro 6, CF65 Screw-on filter Hengst H9W0 CF Euro 6 Filter insert Hengst E830H D253 CF85, CF75, 85CF, 75CF Filter insert Hengst E39H D20 CF85, CF75, 85CF Centrifuge Hengst Z2 D64 CF85, CF75 Filter insert Hengst E34H D23 CF85, CF75 Filter insert Hengst E43H D23 85CF Screw-on filter Hengst H300W02 75CF Screw-on filter Hengst H300W06 Hydraulic filter for steering Filter type Filter insert CF Euro 6, CF85, CF75, CF65, 85CF, 75CF, 65CF Hengst E0H02 MANN H 60/4 Knecht/Mahle HX 5

122 22 Engine 2 Hydraulic filter for steering CF This figure corresponds to CF Euro 6, CF85, CF75, CF65, 85CF, 75CF, 65CF Hengst E0H02 CF Euro Hengst E70H Fuel pre-filter CF Euro 6, CF85, CF Hengst H70WK MANN PL 420 x Knecht/Mahle KC 296D Fuel filter This figure corresponds to suitable for Filter type Comparative no. CF85, CF75, CF65 Screw-on filter Hengst H7090WK30 MANN WK 060/3 x Knecht/Mahle KC 249D CF85, CF75 Filter insert Hengst E70KP D98 MANN PU 966/2 x CF85, CF75 Filter insert Hengst E66KP D36 MANN PU 999/2 x Knecht/Mahle KX 8D ECO CF85, CF75 Filter insert Hengst E82KP D36 MANN PU 966/ x Mahle/Knecht KX 262 D 85CF, 75CF, 65CF Screw-on filter Hengst H7WK03 MANN WDK 940/5 Knecht/Mahle KC 7

123 Engine 23 Fuel pre-filter CF 2 CF Euro 6, CF85, CF Hengst H70WK Fuel filter This figure corresponds to suitable for Filter type Comparative no. CF85, CF75, CF65 Screw-on filter Hengst H7090WK30 CF85, CF75 Filter insert Hengst E70KP D98 CF85, CF75 Filter insert Hengst E66KP D36 CF85, CF75 Filter insert Hengst E82KP D36 CF65 Screw-on filter Hengst H90WK CF65 Screw-on filter Hengst H8WK05 85CF, 75CF, 65CF Screw-on filter Hengst H7WK03 Work smarter. Relying on premium quality. We offer you a filter range with which you can convince even your most demanding customers. We offer outstanding reliability from safe installation to optimal functionality and a long service life. A strong OE brand for all car brands.

124 24 Engine 2 CF Air filter Filter type Filter insert This fi gure corresponds to CF Euro 6, CF85, CF Hengst E5420 MANN C 27 70/4 CF85, 85CF, 75CF Hengst E479L MANN C CF85, CF Hengst E702L MANN C / Air filter This fi gure corresponds to suitable for Filter type Comparative no. CF Euro 6, CF85, CF65 Filter insert Hengst E54L0 CF85, CF75, CF65 Screw-on fi lter Hengst H00WL CF85, CF75 Filter insert Hengst E702L CF85, 85CF, 75CF Filter insert Hengst E479L CF85 Filter insert Hengst E54L CF75, CF65 Filter insert Hengst E542L 85CF Filter insert Hengst E25L 75CF, 65CF Filter insert Hengst E483L Urea filter for AdBlue system Filter type Filter insert This fi gure corresponds to CF Euro Hengst E03U D295 CF85, CF75, CF Hengst E0U D324 Oil cooler Length 29 mm Width 90 mm Height 34 mm CF HELLA 8MO

125 Engine 25 Oil cooler Length 206 mm Width 6 mm Height 95 mm 2 CF CF HELLA 8MO Accessories Description Adapter plate => must be used in conjunction with vehicles up to model year 2/ Oil cooler gasket set CF DAF Fuel Anti-syphon simple insertion, no drilling, no fi ling, model patented, the safety device is simply turned and fi xed into the tank, once installed, it is impossible for diesel to be drained out of the tank, the original fuel cap is retained, integrated anti-rebound system (anti-vortex), double chrome-plating and electrogalvanised Height 65 mm 05 mm suitable for CF Fuel cap Version lockable, with ventilation Material stainless steel 80 mm CF85, CF DAF

126 26 Drivetrain 2 CF Ribbed V-belt suitable for Profile Length CF85 7 PK 752 mm CF65 8 PK 25 mm CF85 9 PK 380 mm Ribbed V-belt suitable for Profile Length CF85 7 PK 752 mm CF85 8 PK 76 mm CF85 9 PK 380 mm CF85 9 PK 424 mm CF mm CF65 8 PK 226 mm CF65 8 PK 505 mm CF65 8 PK 509 mm CF65 8 PK 894 mm Ribbed V-belt set suitable for Profile Length CF85 7 PK with idler roller and belt tensioner 753 mm CF85 8 PK with belt tensioner 75 mm CF85 8 PK with idler roller and belt tensioner 2045 mm CF85 9 PK poly-v belt and tensioner, without housing (DAF 83986) 380 mm CF85 9 PK poly-v belt and tensioner, without housing (DAF 83986) 425 mm CF85 9 PK poly-v belt and tensioner, without housing (DAF 83986) 453 mm CF75 8 PK with idler roller and belt tensioner 2380 mm CF65 8 PK with belt tensioner 222 mm CF65 8 PK with idler roller and belt tensioner 520 mm

127 Drivetrain 27 Poly-V belt tensioner This fi gure corresponds to suitable for Outer Roll width CF85 69,9 mm 3,7/72,99 mm CF85 77,95 mm 38,85/9,83 mm CF Poly-V belt tensioner suitable for Outer Roll width CF85 70 mm 30,5 mm CF85 85 mm 30,5 mm CF75 85 mm 30,5 mm CF65 86,5 mm 32 mm require an heavy duty. All our experience and the continuous improvement made. That s a great achivement and makes us proud;

128 28 Drivetrain 2 CF Poly-V belt tensioner Outer 78 mm Width 3 mm suitable for CF V-belt Length 475 mm suitable for 85CF, 75CF, 65CF V-belt Length Belt width 475 mm 3 mm suitable for 65CF Deflection pulley/guide pulley for poly-v-belt This fi gure corresponds to suitable for Outer Width CF85 77,95 mm 38,55 mm CF75 90 mm 32/46 mm CF65 65 mm

129 Drivetrain 29 Deflection pulley/guide pulley for poly-v-belt suitable for Outer Roll width CF85 78 mm 38 mm CF85, CF75, 75CF 90 mm 32 mm CF65 65 mm 32 mm CF65 65 mm 32 mm CF Clutch kit XTend Version automatic This fi gure corresponds to suitable for Comparative no. CF75, CF mm Sachs CF mm Sachs Clutch kit XTend, in exchange Version automatic 395 mm Number of teeth 0 CF Sachs Clutch kit in exchange Number of teeth 0 This fi gure corresponds to suitable for Comparative no. CF Euro 6, CF mm Sachs CF Euro mm Sachs CF mm Sachs

130 30 Drivetrain 2 Clutch kit in exchange CF This fi gure corresponds to suitable for Comparative no. CF Euro mm with clutch disc, clutch pressure plate, release bearing LuK CF85, CF75, 85CF, 75CF 430 mm Disc, automatic unit, release bearing LuK CF85, CF75, 85CF 430 mm LuK CF mm LuK CF mm LuK CF mm with automatic mechanism and release bearing LuK CF75, CF mm LuK CF mm LuK CF mm LuK CF 430 mm LuK Clutch plate suitable for Parameter Toothed hub profile Comparative no. CF85 430TZFV 430 mm LuK CF 360TZFA 360 mm / LuK Clutch plate 395 mm Number of teeth 0 Toothed hub profile 3/4"-0N CF Sachs

131 Drivetrain 3 Clutch plate in exchange Parameter 395WGTZ 395 mm Number of teeth 0 Toothed hub profile 3/4"-0N 2 CF CF75, CF Sachs Coupling pressure plate Parameter 430ZBFK 430 mm CF Euro 6, CF85, CF75, 85CF, 75CF LuK Coupling pressure plate in exchange This fi gure corresponds to suitable for Parameter Comparative no. CF Euro 6 MFZ mm Sachs CF Euro 6 MF mm Sachs CF65 MF mm Sachs Clutch releaser Parameter KZIS-4 CF Sachs Clutch releaser Parameter KZISZ-5 CF85, CF75, 85CF, 75CF LuK

132 32 Drivetrain 2 Clutch releaser Parameter KZIS-4 CF CF75, CF65, 75CF, 65CF LuK Clutch releaser Parameter KZISZ-5 CF LuK Release fork Version roller design CF Euro 6, CF Sachs Release fork for automatic gearbox suitable for CF85, CF Release fork Length 275 mm Width 40 mm Thickness 62 mm suitable for CF85, CF

133 Drivetrain 33 Clutch servo CF 2 CF Knorr 62934AM Clutch servo Piston 00 mm (Illustration similar) CF Knorr 62935AM Clutch servo Version mechanical Piston 80 mm Stroke 85 mm (Illustration similar) suitable for Connection Comparative no. CF75 M4 x.5/m6 x Knorr AM CF65 M6 x.5/m4 x Knorr AM Guide bearing for transmission input shaft in the crankshaft Outer Inner Width 62 mm 25 mm 9 mm suitable for CF Euro 6, CF Oil cooler for retarder Length Width 350 mm 75 mm CF HELLA 8MO

134 34 Suspension and damping CF 2 2 Air spring Version with steel piston Piston 230 mm Installation location rear axle matching bolt kit suitable for Fig. Comparative no. CF85, CF75, CF Conti 836 M K CF85, CF75, CF Conti 836 M2 K CF85, CF Conti 887 M K Air spring suitable for Version Piston Bolt set Fig. Comparative no. CF Euro 6, CF85, CF75 with steel piston 92 mm Conti 887 M K CF85, CF75, CF65, 85CF, 75CF with steel piston 70 mm Conti 887 M K3 CF85, CF75, CF65 with steel piston 85 mm Phoenix 887 M K4 CF85, CF75, CF65 with steel piston 220 mm Conti 836 M K CF85, CF75, CF65 with steel piston 230 mm Conti 836 M K CF85, CF75, CF65, 85CF, 75CF with steel piston 92 mm Conti 889 M K2 CF85, CF75, CF65 with plastic piston 242 mm Conti 792 N P0 CF85, CF75 with steel piston 92 mm Conti 887 M K2 CF85, CF75 with steel piston 230 mm Conti 836 N P09

135 Suspension and damping 35 CF 2 2 Air spring suitable for Version Piston Fig. Comparative no. CF85, CF75, CF65 with plastic piston 242 mm Conti 792 N P0 CF85, CF75, CF65 with steel piston 92 mm Conti 889 M K2 Air spring Version double bellows Air connector M6 x,5 Outer mm of cover 286 mm Thread Height Distance between holes 4 x M8 264 mm 58,8 mm CF85, CF75, CF Conti FD P03 Shock absorber Installation location rear axle Fastening Eye/eye Version Oil pressure, twin-tube system CF85, 85CF, 75CF, 65CF Sachs Shock absorber Version oil pressure, twin-tube system (Illustration similar) suitable for Installation location Fastening Comparative no. CF Euro 6, CF85, CF75 front axle pin/pin Sachs CF85, 85CF front axle pin/pin Sachs CF85, CF75, 85CF front axle pin/pin Sachs CF85 front axle pin/eye Sachs 3 58 CF85, CF75 rear axle pin/pin Sachs CF85, CF75, CF65, 85CF, 75CF, 65CF rear axle eye/eye Sachs CF85, 85CF, 75CF, 65CF rear axle eye/eye Sachs 2 002

136 36 Suspension and damping Leaf spring 2 Number of leaves 2 Form L Width 80 mm Bushing rear 24/60 mm Bushing front Installation location Length 24/60 mm front axle 900/900 mm CF This fi gure corresponds to suitable for Axle load Camber Thickness Comparative no. CF85, CF75 7, t 63 mm 64 mm DAF CF85, CF75 7,5 t 60 mm 65 mm DAF Leaf spring Axle load 7,5 t Number of leaves 2 Bushing rear 24/60 mm Bushing front 24/60 mm Installation location front axle This fi gure corresponds to suitable for Form Thickness Length Width Camber Comparative no. CF85 L 69 mm 900/900 mm 80 mm 36 mm DAF CF65 J 58 mm 935/935 mm 90 mm 00 mm DAF Leaf spring Number of leaves 6 Form 8WX Width 90 mm Installation location Length Thickness rear axle 80/80 mm 74 mm CF DAF Leaf spring Form BK Width 90 mm Bushing rear 8/49 mm Bushing front 9/49 mm Installation location Length Thickness Camber rear axle 950/950 mm 99 mm 59 mm CF DAF Leaf spring Form BK Width 90 mm Bushing rear 8/52 mm Bushing front 9/52 mm Installation location Length Thickness Camber rear axle 945/85 mm 99 mm 4 mm CF DAF

137 Suspension and damping 37 Leaf spring Number of leaves 3 Form K Width 90 mm Bushing rear 8/52 mm Bushing front 9/52 mm Installation location Length Thickness Camber rear axle 950/565 mm 82 mm 0 mm 2 CF DAF CF Leaf spring Axle load 0 t Number of leaves 6 Form 8W Width 90 mm Installation location Length Thickness Camber Rear Axle 780/780 mm 67 mm 34 mm 85CF, 75CF DAF Silent bush for spring eye Installation location Length Outer Inner Front axle 86 mm 62,9 mm 24,2 mm CF85, CF75, CF65, 85CF, 75CF, 65CF DAF Spring bushing Installation location front axle This fi gure corresponds to suitable for Length Outer Inner Material Comparative no. CF85, CF75, CF65 52,5 mm 3 mm 26 mm Brass DAF CF85, CF75, CF65 75,5 mm 39 mm 3/35 mm steel DAF

138 38 Axles and steering 2 CF Drag-link Installation location Version Length Cone- Pipe front adjustable on one side 99 mm 30 mm 50 mm CF Lemförder Drag-link Installation location Installation side Length Cone- Pipe front left, longitudinal 005 mm 26 mm 52 mm (Illustration similar) 75CF Lemförder Drag-link Version adjustable on one side Length 867 mm Cone- 30 mm Pipe 50 mm with accessories (Illustration similar) CF85, CF75, CF65, 65CF Lemförder

139 Axles and steering 39 Drag-link Cone- 30 mm 2 CF (Illustration similar) suitable for Version Length Pipe Comparative no. CF85, CF75, 85CF not adjustable 85 mm 42 mm Lemförder CF85, CF75, CF65, 65CF adjustable on one side 867 mm 50 mm Lemförder CF85, CF75, 65CF adjustable on one side 855 mm 50 mm Lemförder CF85, CF75 adjustable on both sides 590 mm 38 mm Lemförder CF85, CF75 adjustable on one side 860 mm 36 mm Lemförder CF85, CF75 adjustable on both sides 860 mm 38 mm Lemförder CF85, CF75 adjustable on one side 860 mm 50 mm Lemförder CF85, CF75 adjustable on one side 865 mm 52 mm Lemförder CF85, CF75 adjustable on one side 05 mm 32 mm Lemförder CF85, CF75 adjustable on one side 368 mm 30 mm Lemförder CF85, CF75 adjustable on one side 868 mm 32 mm Lemförder CF85, CF75 not adjustable 054 mm 36 mm Lemförder CF85, CF75 not adjustable 85 mm 42 mm Lemförder CF85, CF75 not adjustable 977 mm 52 mm Lemförder CF85 adjustable on one side 25 mm 30 mm Lemförder CF65 adjustable on one side 926 mm 46 mm Lemförder Drag-link PROEQUIP Length Cone- Pipe 925 mm 30 mm 46 mm CF TRW JTR053 Drag-link PROEQUIP Length Cone- Pipe 865 mm 30 mm 52 mm CF85, CF TRW JTR067

140 40 Axles and steering 2 CF Ball joint for drag link/track rod Installation location front axle Installation side left/right Length 20 mm Cone- 30 mm Outer thread M30 x,5 suitable for Threadtype Comparative no. CF Euro 6, CF85, CF65 left-hand thread Lemförder CF Euro 6, CF85, CF65 right-hand thread Lemförder Ball joint for drag link/track rod Installation location front axle Length 5 mm Cone- 26 mm Outer thread M30 x,5 (Illustration similar) suitable for Installation side Threadtype Comparative no. CF85, CF75, 85CF, 75CF left left-hand thread Lemförder CF85, CF75, 85CF, 75CF right right-hand thread Lemförder Ball joint PROEQUIP, for steering rod/track rod Installation location front axle Length 20 mm Cone- 30 mm Outer thread M30 x,5 suitable for Installation side Threadtype Comparative no. CF Euro 6, CF85, CF75, CF65, 85CF, 75CF, 65CF left left-hand thread TRW JTE4002 CF Euro 6, CF85, CF75, CF65, 85CF, 75CF, 65CF right right-hand thread TRW JTE400 Ball joint for drag link/track rod Installation location front axle Length 5 mm Cone- 26 mm Outer thread M30 x,5 (Illustration similar) suitable for Installation side Threadtype Comparative no. CF85, CF75, 85CF, 75CF left left-hand thread Lemförder CF85, CF75, 85CF, 75CF right right-hand thread Lemförder

141 Axles and steering 4 Ball joint Length 80 mm Cone- 30 mm Outer thread M22 x,5 Threadtype right-hand thread with accessories Control on steering cylinder 2 CF CF85, CF75, 85CF, 75CF Lemförder Ball joint for drag link/track rod Cone- 30 mm Outer thread M30 x,5 Threadtype right-hand thread suitable for Length Comparative no. CF Euro 6, CF85, CF65 20 mm Lemförder CF85 4 mm Lemförder Ball joint for drag link/track rod Installation location front axle Length 4 mm Cone- 26 mm Outer thread M30 x,5 Threadtype right-hand thread with accessories CF Lemförder Ball joint for track rod Length 4 mm Cone- 30 mm Outer thread M30 x,5 Threadtype right-hand thread with accessories CF85, CF TRW JTE04

142 42 Axles and steering 2 CF Ball joint for track rod Length 4 mm Cone- 26 mm Outer thread M30 x,5 Threadtype right-hand thread with accessories CF85, CF75, CF TRW JTE032 Ball joint Length 95 mm Cone- 30 mm Inner thread M22 x,5 Threadtype right-hand thread Control on steering cylinder CF85, CF Lemförder Screw for tracking adjustment Inner thread M30 x,5 Outer thread M38 x,5 Length 93 mm Comparative no Lemförder Ball joint Installation location front axle Length 20 mm Cone- 30 mm Inner thread M24 x,5 Threadtype right-hand thread CF85, CF75, 85CF Lemförder Ball joint for drag link/track rod Length 45 mm Cone- 30 mm Outer thread M30 x,5 Form offset CF85, CF Lemförder

143 Axles and steering 43 Ball joint for track rod, PROEQUIP X-Cap Outer thread M30 x,5 Threadtype right-hand thread with accessories This fi gure corresponds to CF suitable for Length Cone- Comparative no. CF Euro 6, CF85, CF75, CF65 22 mm 30 mm TRW JTE4078 CF85, CF75 7 mm 26 mm TRW JTE3533 Steering Track Rod Installation location front axle Length 698 mm Cone- 26 mm This fi gure corresponds to suitable for Version Pipe Comparative no. CF85, CF75, CF65, 85CF, 75CF, 65CF guide rod, adjustable on both sides 40 mm Lemförder CF85, CF75, 85CF, 75CF guide rod, adjustable on one side 52 mm Lemförder Steering Track Rod Installation location front axle Version guide rod, adjustable on both sides Pipe 40 mm suitable for Length Cone- Comparative no. CF85, CF75, CF65, 85CF, 75CF, 65CF 698 mm 26 mm Lemförder CF85, CF75, CF65, 75CF, 65CF 734 mm 26 mm Lemförder CF85, CF75, CF mm 30 mm Lemförder Steering Track Rod Version adjustable on both sides Pipe 40 mm suitable for Installation location Length Cone- Comparative no. CF85, CF75 front axle 646 mm 26 mm Lemförder CF85, CF75, CF65 rear axle 690 mm 30 mm Lemförder

144 44 Axles and steering 2 CF Steering Track Rod PROEQUIP Installation location front axle This fi gure corresponds to suitable for Length Cone- Pipe Comparative no. CF85, CF75, CF mm 30 mm 40 mm TRW JTR070 CF85, CF75, 85CF 698 mm 26 mm 52 mm TRW JTR00 Steering Track Rod Installation location front axle Length 734 mm Pipe 40 mm Cone- 30 mm CF85, CF75, CF Lemförder Power-steering pump Rate of delivery 9 dm³ Version hydraulic suitable for Pressure Comparative no. CF85, CF75, 85CF, 75CF 80 bar DAF CF, 75CF 50 bar DAF 'A' frame Installation location Bore hole Pipe Distance between holes rear axle 23 mm 48 mm 52 mm suitable for Length Comparative no. CF85, CF75, CF65, 75CF, 65CF 609 mm Lemförder CF85, CF75, 75CF 608,2 mm Lemförder

145 Axles and steering 45 'A' frame Installation location Bore hole Distance between holes rear axle 23 mm 52 mm 2 CF This fi gure corresponds to suitable for Length Pipe Comparative no. CF Euro 6, CF85, CF mm 58 mm DAF CF85, CF75, CF65, 75CF, 65CF 609 mm 48 mm DAF Repair kit for "A" frame Installation location Outer Thickness Distance between centres Bore hole rear axle 85 mm 24 mm 52 mm 23 mm CF85, CF75, 85CF, 75CF, 65CF Lemförder Repair kit for "A" frame CF85, CF75, 85CF, 75CF TRW JRK0005 Repair kit for "A" frame CF85, CF75, 75CF Lemförder

146 46 Axles and steering 2 CF Trailing arm Bearing version Length Pipe Bore hole Distance between holes molecular bearing 595 mm 50 mm 2 mm 30 mm CF Euro 6, CF85, CF TRW JRR049 Trailing arm Installation location Bearing version Length Pipe Bore hole Distance between holes Front axle Molecular bearing 605 mm 48 mm 2/2 mm 30/30 mm CF85, CF TRW JRR7023 Trailing arm Installation location Bearing version Length Pipe Bore hole Distance between holes rear axle molecular bearing 606 mm 40 mm 9/9 mm 30/30 mm CF85, CF75, 85CF, 75CF Lemförder Trailing arm Bearing version Length Pipe Bore hole Distance between holes molecular bearing 600 mm 50 mm 2 mm 30 mm CF85, CF75, 75CF Lemförder

147 Axles and steering 47 Repair kit for trailing arm Bearing version Bore hole Distance between holes Thickness molecular bearing 7 mm 5 mm 24 mm 2 CF 85CF, 75CF Lemförder Repair kit for trailing arm Bore hole Distance between holes Thickness 7 mm 5 mm 24 mm 85CF, 75CF DAF Repair kit for trailing arm Bore hole Distance between holes 2/2 mm 52 mm CF85, CF Lemförder Repair kit for trailing arm Installation location Bore hole Distance between holes rear axle 9 mm 30 mm CF85, CF75, 75CF Lemförder 73 0

148 48 Axles and steering 2 CF Repair kit for trailing arm Bearing version Bore hole Distance between holes molecular bearing 9 mm 30 mm 75CF, CF85, CF Lemförder Trailing arm and transverse link Length 600 mm Distance between holes 5 mm Pipe 40 mm Bore hole 7 mm CF85, CF Lemförder Repair kit for trailing arm Bearing version molecular bearing Bore hole 7 mm Thickness 24 mm Distance between holes 5 mm with retaining ring and distance sleeve CF85, CF Lemförder Stabiliser Length 2028 mm Pipe 36 mm Cone- 30 mm CF TRW JTS005 Stabilizer mounting Installation side left/right This fi gure corresponds to suitable for Installation location Length Outer Inner Comparative no. CF85, CF75, CF65, 85CF, 75CF, 65CF front axle 50 mm 52/46,5 mm 6 mm DAF CF85, CF75, CF65, 85CF, 75CF, 65CF front axle, inner 62,5 mm 60 mm 4 mm DAF CF65 front axle, outer 37 mm 36 mm 6 mm DAF

149 Axles and steering 49 Kingpin kit Length 254 mm Outer 3,5 mm 2 x pins + fittings 2 CF CF85, CF DAF Kingpin kit Length 272 mm Bolt- 32,5 mm 2 x pins and fittings 85CF, 75CF, 65CF DAF Safety No compromises As the heavyweight in safety, TRW Proequip is the brand to trust for your OE matching quality HCV parts. Tough, reliable and durable, the braking, steering & suspension and shock absorber programmes which make up TRW s unique Corner Module offer, are designed to deal with the harshest of driving conditions. Produced at dedicated HCV manufacturing facilities to exacting OE matching standards and tested to the extreme, every single part is injected with over 00 years of TRW s engineering excellence. TRW Proequip is the solid choice of professionals across Europe. trwaftermarket.com/trwproequip THE HEAVYWEIGHT IN SAFETY

150 50 Axles and steering 2 Shaft sealing ring for wheel hub Installation location Inner rear 25 mm CF This figure corresponds to suitable for Outer Comparative no. CF Euro 6, CF85, CF75, 85CF, 75CF, 65CF 60/90 mm DAF CF85, CF75, 85CF, 75CF, 65CF 60 mm DAF ABS ring suitable for Installation location Outer Inner Thickness Comparative no. CF85, CF75, CF65, 85CF, 75CF, 65CF front axle 48 mm 8 mm 3,3 mm DAF CF85, CF75, 85CF front axle 70 mm 38 mm 3,3 mm DAF CF85, CF75, CF65 rear axle 22 mm 68 mm 8 mm DAF CF85, CF75, CF65, 85CF, 75CF, 65CF rear axle 22 mm 68 mm 8 mm DAF Wheel bolt Outer thread M22 x,5 Surface phosphated Class 0.9 This figure corresponds to suitable for Thread length Length Comparative no. CF85, CF75, CF65, 85CF, 75CF, 65CF 42 mm 97 mm DAF 3099 CF Euro 6, CF85, CF75, CF65, 85CF, 75CF, 65CF 42 mm 4 mm DAF CF Euro 6, CF85, CF75, CF65, 85CF, 75CF, 65CF 45 mm 85 mm DAF Wheel nut Spanner size 32 mm This figure corresponds to suitable for Thread Surface Height Comparative no. CF Euro 6 M22 x,5 geometrized 26 mm DAF CF Euro 6 M22 x,5 geometrised 62 mm DAF CF85 M22 x,5 phosphated 30 mm DAF CF, 75CF, 65CF M22 x 2 phosphated 25 mm DAF

151 Axles and steering 5 Wheel nut with middle centering Thread M22 x,5 Height 27 mm Standard DIN 7436 Surface phosphated Spanner size 32 mm 2 CF Wheel hub Version with bearing CF85, CF DAF 826 CF85, CF75, CF DAF Sealing ring for wheel hub Inner Thickness mm 5 mm CF85, CF75, CF65, 85CF, 75CF, 65CF DAF Tapered roller bearing Type Outer 80 mm Inner 40 mm Width 32 mm (Illustration similar) suitable for CF

152 52 Axles and steering 2 Tapered roller bearing CF This fi gure corresponds to suitable for Type Outer Inner Width CF Euro 6, CF85, CF75, CF65, 85CF, 75CF, 65CF VKHB mm 00 mm 47 mm CF mm 40 mm 32 mm Wheel bearing This fi gure corresponds to suitable for Outer Inner Width Comparative no. CF85, CF75, CF65, 85CF, 75CF 25 mm 70 mm 4 mm FAG H95 CF85, CF75, CF65, 85CF, 75CF 24,7 mm 70 mm 0 mm FAG H95 CF85, CF75, CF65, 85CF, 75CF 48 mm 00 mm 35 mm FAG H95 CF85, CF75, 85CF 38 mm 82 mm 30 mm FAG H95 Lubricant sensor automatic, filled with special grease, transparent container for visual check, LED status display Application range high temperatures and loads, pivot bearing Contents Comparative no. 25 ml DAF Wheel hub cover Installation location front axle Inner 4 mm Outer 60/25 mm Thickness 40 mm Hole circle 4 mm Number of holes 4 suitable for CF85, CF75, CF

153 Braking system 53 Brake caliper Version standardised Fastening axial Bearing version with steel cap Wheel size 22,5" Angle of brake chamber centre line to axis of axle: 0 without brake bracket and linings This figure corresponds to CF suitable for Type Comparative no. CF Euro 6 SN7203RC Knorr K CF Euro 6 SN723RC Knorr K CF85, CF65 SN7205RC Knorr K CF85, CF65 SN725RC Knorr K Accessories Description Pressure pad set, SN 6/7 CF Euro 6, CF85, CF Knorr K00603 Adjuster cap set, SN 5/6 CF Euro Knorr K Guide sealing set, SN 7 CF Knorr K Guide sealing set, SN 6/7 CF Knorr K0095 Brake disc Thickness Minimum thickness Outer with accessories 45 mm 37 mm 432 mm CF Euro 6, CF85, CF Knorr K034248K50 Suitable brake piston resetting tools available from EUROPART! Brake pad set Version prepared for wear indicator Brake system SB 7000 WVA no , 29253, Coating length 248 mm Lining width 0 mm Lining thickness 30,00 mm CF Euro Textar

154 54 Braking system CF 2 2 Brake pad set suitable for Installation location WVA no. Brake system Coating length Lining width Lining thickness Fig. CF Euro 6, CF85, Front axle/rear axle 2908 SB/SM 7 247,5 mm 09,5 mm 30,00 mm CF75, CF65, 85CF CF85, CF75, CF65, 85CF Front axle/rear axle 29059, 2906, 29087, 2908, 2920 SB/SN 7 247,5 mm 09,5 mm 30,00 mm specifi cally for short-distance use Brake pad set Version prepared for wear warning indicator Installation location Front axle/rear axle Brake system SB/SN7 Lining thickness 30 mm CF Euro Meritor MDP3087K Brake pad set Version with hold-down system Brake system SB/SN7 (ProTecS) WVA no Coating length 248 mm Lining width 0 mm Lining thickness 30 mm CF Beral

155 Braking system 55 CF Slack adjuster Version automatic Bore hole 4 mm Number of holes Number of teeth 0 Toothed hub profile SAE /2'' 0 C suitable for Form Distance between holes Fig. Comparative no. CF Euro 6, CF85 left offset, -56 mm 43 mm Haldex 72544C CF Euro 6, CF85 left offset, +56 mm 43 mm Haldex 72545C CF Euro 6, CF85 left offset, +6 mm 45 mm Haldex 72704C CF Euro 6, CF85 left offset, -6 mm 45 mm Haldex 72705C Brake drum Installation location rear axle Inner 420 mm Hole circle 335 mm Hub 285,00 mm Height 288 mm Number of holes 0 You'll find suitable brake spring pliers on page 279 suitable for CF Euro 6, CF CF, 75CF, 65CF Brake lining set WVA no Quality 66 Brake drum 420 mm Lining thickness 2,55 mm Lining width 200 mm CF Euro 6, CF Beral

156 56 Compressed air 2 CF Compressor Version water cooled Number of cylinders 2 Stroke 50 mm Capacity 442 cm³ Operating pressure max. 2,5 bar CF WABCO Accessories Description O-ring Compressor Version water cooled Number of cylinders 2 Stroke 62/2 mm Capacity 352/9 cm³ CF WABCO Accessories Description O-ring Air dryer Cut-off pressure Type 0,4 bar LA845 CF Knorr K04986N50 Air dryer cartridge ASP (Air System Protector) new drying agent cartridge with improved oil precipitation thanks to integrated coalescence fi lter for precipitating the tiniest of oil drops, based on tried and trusted WABCO technology Version with coalescing filter Operating pressure 4 bar Connection thread M39 x,5 Threadtype right-hand thread Easy to retrofit as a replacement for standard drying agent cartridge. 85CF, 75CF, 65CF WABCO

157 Compressed air 57 Air dryer cartridge ASP (Air System Protector) Version with coalescence fi lter Threadtype right-hand thread Operating pressure max. 3 bar Connection thread M4 x.5 2 CF CF85, CF75, CF65, 85CF, 75CF, 65CF WABCO Air dryer cartridge as replacement Operating pressure 4 bar Connection thread M39 x.5 Replacement for WABCO CF, 75CF, 65CF WABCO Air dryer cartridge Dries and cleans compressed air, uses a highly effective, proven drying agent Threadtype right-hand thread Operating pressure max. 4 bar Thread M4 x,5 Height 35 mm Application range Suitable for all air dryer types with standard screw-on cartridge connection Complete with sealing rings CF85, CF75, CF Knorr II4300F Air dryer cartridge Version with oil trap Height 65 mm Thread M4 x,5 CF Knorr K039455

158 58 Compressed air 2 Muffler Version Snap connection CF Comparative no Knorr II4063F Four-circuit protection valve with safety venting in spring accumulator circuit, controlled through circuit Connection thread M22 x.5/m6 x.5 Opening pressure 2-22, 24: 6,5 bar 23: 7 bar Closing pressure 2-22, 24: 6,5 bar 23: 7 bar CF Knorr II37464N50 Four-circuit protection valve with safety venting in spring actuator circuit, controlled through circuit Thread Opening pressure Closing pressure M6 x,5/m22 x,5 NG2 VOSS 2-24: 9 bar 2-24: 9 bar CF Knorr II3900FN50 ABS pressure control valve CF Knorr K038438N50 ALB controller Connection M22 x.5 VOSS 230 control range from 0,8 ± 0,2 bar CF WABCO

159 Compressed air 59 Blowoff valve Limiting pressure 0,5 +0,/-0,2 bar Inlet pressure 2 bar CF 2 CF WABCO Pressure control valve for Voss 230 Connection electric, bayonet (DIN)72585 Connection thread M22 x.5 Operating pressure max. 3 bar Voltage 24 V CF WABCO Pressure control valve Connection electric, bayonet (DIN)72585 Connection thread M22 x.5 JED-388 Voltage 24 V Operating pressure max. bar Protection class IP67 CF85, CF WABCO Accessories Description Comparative no. Adapter cable WABCO Hand brake valve Version with control position, without park brake, microswitch and emergency release Connection lateral, M6 x.5 VOSS NG8 Operating pressure max. 0 bar 2nd circuit acting indirectly, ventilation connection for hose or pipe of 6mm diameter CF Knorr DPM90D

160 60 Compressed air 2 Brake signal transmitter Operating pressure 3 bar CF CF WABCO Brake signal transmitter Version with muffler Connection 4 x M22 x.5 Operating pressure 0 bar Thread VOSS, Typ 3 CF WABCO EBS axle modulator Operating pressure max. 5 bar Thread M22 x,5 CF WABCO EBS axle modulator Version tractor unit, FT 4 2, without redundancy valve CF WABCO EBS trailer control valve Version connector, horizontal Operating pressure max. 8.5 bar CF WABCO

161 Compressed air 6 Solenoid valve 3/2 way Version ventilated Connection electric, bayonet (DIN) Protection class IP6K6/IP6K9K Voltage 24 V 2 CF CF WABCO Solenoid valve 3/2-direction control Version Connection Nominal width Voltage Operating pressure aerating M2 x,5, bayonet DIN A-2.-Sn/K 2,2/3 mm 24 V - bar CF Euro WABCO ABS relay valve Operating pressure 3 bar Height 0 mm Width 04 mm Connection M22 x.5 reserve Connection 2 M22 x,5 exit Connection 4 M6 x,5 control connection 95XF Knorr AC574AXY Relay valve Connection M22 x,5/m6 x,5, bayonet only for spring brake chamber circuit CF Knorr AC577B Relay valve Connection -2 M22 x,5 Connection 3 M6 x,5 only for spring brake chamber circuit CF Knorr AC577A

162 62 Compressed air 2 CF Relay valve Version proportional relay valve Connection -2 M22 x,5 Connection 4 M6 x,5 Operating pressure 0 bar Thread VOSS 232 CF WABCO /2-way valve Stroke 2,5 mm Tappet length 42 mm with hexagonal nut M26 x,5 CF WABCO Quick-release valve Connection M22 x.5 Connection 2 M6 x,5 Connection 3 M22 x,5, with venting membrane CF Knorr Speed sensor Length 230 mm CF85, CF WABCO Speed sensor set Version with connection socket Length 2200 mm with grease and clamping bush 75CF WABCO

163 Compressed air 63 Spring brake chamber Connection M6 x,5 Operating pressure max. 0,2/8.5 bar Stroke 75/75 mm Length of piston rod 5 mm Release pressure 5, bar power output 7900 N 2 CF CF Euro 6, CF WABCO Piston brake cylinder Type 24 Pin spacing 20,7 mm Stroke 57/57 mm Length of piston rod 5 mm Diaphragm size 24" CF Knorr II3408 Combination brake cylinder Connection M22 x,5 Operating pressure max. 0,2/8.5 bar Stroke 64/64 mm Length of piston rod 5 mm Release pressure 6, bar power output 0900 N CF WABCO CF WABCO CF WABCO Coupling head automatic Version with valve Connection thread M6 x,5 This fi gure corresponds to suitable for Colour Comparative no. CF85 red WABCO CF85 yellow WABCO

164 64 Compressed air 2 Coupling head Version self-sealing Connection M6 x,5 CF suitable for Type Colour Comparative no. CF85, CF75, 85CF, 75CF KU424 red Knorr K00423 CF85, CF75, 85CF, 75CF KU428 yellow Knorr K ECAS path sensor Version with lever Connection Bayonet DIN A-2.-Sn/K2 CF85, CF WABCO ECAS solenoid valve Operating pressure 5-3 bar Voltage 24 V CF WABCO ECAS solenoid valve Version 3 magnets, with silencer Installation location rear axle Connection electric, bayonet (DIN) Connection thread M22 x,5, VOSS 230 Operating pressure max. 5-3 bar Voltage 24 V Application range 2 path sensors CF WABCO

165 Compressed air 65 ECAS solenoid valve Version with noise reducer, solenoid connection at top Installation location rear axle, tag axle Connection electric, 2 x bayonet DIN Connection thread M22 x.5, VOSS 230 Operating pressure max. 5-3 bar Protection class IP6K6K Voltage 24 V 2 CF CF WABCO ECAS solenoid valve Operating pressure max. 5-3 bar Protection class IP6K9K Voltage 24 V CF85, CF75, CF WABCO Operating unit ECAS/ELM Version 9-pole Voltage 24 V connector version ID (Illustration similar) CF WABCO

166 66 Lighting and electrics 2 CF H7/H main headlamp Version with dipped beam, indicator, high beam, position and LED daytime running light Bulb type H7/H/P2W Voltage 24 V Application range for vehicles without headlight levelling and without headlight cleaning system with bulbs suitable for Installation side Comparative no. CF Euro 6 left HELLA ED CF Euro 6 right HELLA ED you'll find suitable bulbs starting on page 258 H7/H main headlamp Version with dipped beam, indicator, high beam and position light Bulb type H7/H/P2W/W5W Voltage 24 V with bulbs suitable for Installation side Application range Comparative no. CF85, CF75, CF65 left for vehicles without headlight levelling HELLA EJ CF85, CF75, CF65 right for vehicles without headlight levelling HELLA EJ CF85, CF75, CF65 left for vehicles with headlight levelling (electric) HELLA EJ CF85, CF75, CF65 right for vehicles with headlight levelling (electric) HELLA EJ Xenon headlamp Version with dipped beam, indicator, high beam and position light Bulb type D2S/H/PY2W/W5W Voltage 24 V Application range for vehicles with and without headlamp levelling (electric) without actuator for headlamp levelling and without ballast suitable for Installation side CF85, CF75, CF65 left CF85, CF75, CF65 right

167 Lighting and electrics 67 H4 main headlamp Version with high beam and side light Bulb type H4/W5W Voltage 24 V Application range for vehicles without headlight levelling with bulbs 2 CF suitable for Installation side Comparative no. 85CF, 75CF, 65CF left HELLA AG CF, 75CF, 65CF right HELLA AG you'll find ball joint separators on page 287 H fog light Bulb type H Voltage 24 V Design FF/Halogen Type flush-mounting Application range for vehicles with cornering lights with bulb suitable for Installation side Comparative no. CF Euro 6 left HELLA ND CF Euro 6 right HELLA ND H3 fog light Version with high beam Bulb type H3/H3 Voltage 24 V with bulbs suitable for Installation side Comparative no. CF85, CF75, CF65 left HELLA PE CF85, CF75, CF65 right HELLA PE

168 68 Lighting and electrics 2 CF H fog light Version with main beam Bulb type H/H3 Voltage 24 V housing with headlamp insert and pre-fi tted bulbs, without frame suitable for Installation side Comparative no. CF85, CF75, CF65 left HELLA 9BG CF85, CF75, CF65 right HELLA 9BG Accessories Description Headlight frame, left Headlight frame, right LED indicator light ICDL0 Version Bulb type Voltage Lens colour Type without bulb carriers PY2W 24 V clear Fitting/installation suitable for Installation side Comparative no. CF Euro 6 left Vignal 7000 CF Euro 6 right Vignal 700 Indicator light ICDL07 Installation location Installation side Bulb type Lens colour Type with bulb holder side left/right P2W yellow surface-mounting CF85, CF75, CF Vignal

169 Lighting and electrics 69 Position light Installation location Installation side Bulb type Voltage Width Height Colour Lens colour Type with bulb holder front, top left/right C5W 24 V 00 mm 40 mm clear clear flush-mounting 2 CF CF85, CF75, CF65, 85CF, 75CF, 65CF HELLA 2PF End-outline marker lamp Version Installation location Installation side Bulb type Voltage Width Height Depth Lens colour Type with bulb holder with reflector front left/right W5W 2/24 V 0 mm 50 mm 8 mm clear surface-mounting approved for vehicles in accordance with GGVS/ADR CF85, CF Vignal Accessories This fi gure corresponds to Description Comparative no. Bulb holder, AMP JPT, 2-pin, with sealing ring Vignal Connection cable, AMP JPT, 2-pin Vignal End-outline marker lamp Installation location front Installation side left/right Bulb type W5W Voltage 2/24 V Width 40 mm Height 30 mm Depth 65 mm Lens colour clear 85CF, 75CF Vignal 9500

170 70 Lighting and electrics 2 CF Side marker light Version with reflector Installation side left/right Bulb type W5W Voltage 2/24 V Width 0 mm Height 50 mm Depth 8 mm Lens colour yellow Type surface-mounting with bulb holder approved for vehicles in accordance with GGVS/ADR CF85, CF75, 85CF, 75CF, 65CF Vignal Accessories This fi gure corresponds to Description Comparative no. Bulb holder, AMP JPT, 2-pin, with sealing ring Vignal Connection cable, AMP JPT, 2-pin Vignal LED rear light Voltage Connection Pin spacing Width Height Depth 24 V connector, lateral (8-pin) 60 mm 403,5 mm 59 mm 92 mm approved for vehicles in accordance with ADR/GGVS suitable for Installation side Version Comparative no. CF Euro 6 left with indicator, stop, licence plate, rear fog, tail, reversing, side marker and clearance light, refl ector (full LED) CF Euro 6 right with indicator, stop, rear fog, reversing, tail, side marker and clearance light, refl ector (full LED) HELLA 2VD HELLA 2VP Accessories Description Comparative no. Lens, left/right HELLA 9EL

171 Lighting and electrics 7 Indicator Version for LED lamps, type 2VD/2VP Voltage 24 V Number of poles 4 with bracket 2 CF CF85, CF75, CF HELLA 4DW LED control unit Version for LED flashing light Voltage 24 V Number of poles 5 Comparative no HELLA 5DS LED rear light LC8 LED Voltage Connection Width Height Depth Pin spacing 24 V connector, lateral (HDSCS) 400 mm 60 mm 85 mm 60 mm suitable for Installation side Version Comparative no. CF Euro 6 left with indicator, brake, reversing, rear fog, tail, side marker and number plate light, refl ector CF Euro 6 right with indicator, brake, reversing, rear fog, tail, side marker, refl ector Vignal Vignal 5760 Accessories Description Comparative no. Lens, left/right Vignal Connecting plug, 8-pin Vignal D3878

172 72 Lighting and electrics 2 CF Rear light in hybrid technology Bulb type P2W/PY2W Voltage 24 V Lens colour red/clear Pin spacing 60 mm Width 400/49 mm Height 59 mm Depth 92 mm with bulbs suitable for Installation side Version Comparative no. CF Euro 6 (05/203-) CF85 (04/202-) CF75 (04/202-) CF65 (04/202-) left with indicator, stop, LED licence plate, rear fog, reversing, LED tail, LED side marker and LED clearance light, refl ector HELLA 2VD CF Euro 6 (05/203-) CF85 (04/202-) CF75 (04/202-) CF65 (04/202-) right with indicator, stop, rear fog, reversing, LED tail, LED side marker and LED clearance light, refl ector HELLA 2VP Accessories Description Comparative no. Lens, left/right HELLA 9EL Rear light LC5V Bulb type P2W/R0W Voltage 24 V Lens colour red/clear/yellow Connection AMP.5 (round connector), rear Width 350 mm Height 30 mm Depth 83 mm Pin spacing 52 mm approved for vehicles in accordance with GGVS/ADR suitable for Installation side Version Comparative no. CF85, CF75, CF65 left-hand side with indicator, brake, number plate, rear fog, reversing and tail light, refl ector CF85, CF75, CF65 left/right with indicator, brake, rear fog, reversing and tail light, refl ector Vignal Vignal 5280 Accessories Description Comparative no. Lens, with reflector Vignal Connecting plug AMP.5, 7-pin, straight Vignal D868

173 Lighting and electrics 73 Rear light LC7 Bulb type P2W/R5W Voltage 24 V Lens colour red/clear/yellow Connection DIN round connector, rear Width 464 mm Height 30 mm Depth 83 mm Pin spacing 52 mm with bulb holder approved for vehicles in accordance with GGVS/ADR 2 CF suitable for Installation side Version Comparative no. CF85 left with indicator, brake, number plate, rear fog, reversing, side marker and tail light, reflector CF85 left/right with indicator, stop, rear fog, reversing, clearance, side marker and tail light, reflector Vignal Vignal Accessories Description Comparative no. Lens, with reflector, left/right Vignal Rear light LC7 Voltage 24 V Lens colour red/clear/yellow Connection AMP.5, lateral Width 464 mm Height 30 mm Depth 83 mm Pin spacing 52 mm approved for vehicles in accordance with GGVS/ADR suitable for Installation side Version Comparative no. CF85, CF75 left with indicator, stop, licence plate, rear fog, reversing, side marker, tail and clearance light, reflector CF85, CF75 right with indicator, brake, rear fog, reversing, taillight and side marker light, reflector Vignal Vignal 6970 Accessories Description Comparative no. Lens, with reflector, left/right Vignal Connecting plug AMP.5, 7-pin, straight Vignal D868 Reversing alarm, left Vignal D2953

174 74 Lighting and electrics 2 CF Rear light LC8 Bulb type P2W/R5W Voltage 24 V Lens colour red/clear Connection HDSCS connector, rear Length 400 mm Width 60 mm Depth 89,5 mm Pin spacing 52 mm approved for vehicles in accordance with GGVS/ADR suitable for Installation side Version Comparative no. CF (04/202-) left with indicator, brake, number plate, rear fog, reversing, side marker and tail light, reflector CF (04/202-) right with indicator, brake, rear fog, reversing, side marker and tail light, reflector Accessories Vignal Vignal 5540 Description Comparative no. Lens, left Vignal Lens, right Vignal Connecting plug, 8-pin Vignal D3878 Reversing alarm, AMP Vignal Headlight bracket Installation location Driver cab Material Surface without headlamps top Sleeper Cab V2A stainless steel high-gloss polished 60 mm you'll find suitable headlamps on page 262 suitable for CF Fastening clamp for headlight for mounting on the impact protection of light bar Material Stainless steel 60 mm Indicator switch Switch function indicate, horn, wash-wipe and light switch-over function Voltage 24 V Cable length 730 mm suitable for CF85, CF75, CF65, 85CF, 75CF, CF

175 Lighting and electrics 75 Starter Motor Voltage 24 V Power 4 kw Pinion teeth 0 Flange 3-hole 2 CF CF Bosch Starter Motor Voltage 24 V Power 5,5 kw Pinion teeth Flange 3-hole CF Prestolite M90R3543SE Starter Motor in exchange Voltage 24 V Power 5,5 kw Pinion teeth 2 Version 55, right Flange 3-hole CF Bosch Starter Motor in exchange Voltage 24 V Power 6,2 kw Pinion teeth Version 60, left Flange 3-hole CF85, 85CF Bosch

176 76 Lighting and electrics 2 CF Alternator Voltage 24 V Charging current 55 A Version without belt pulley Flange 3-hole 85CF, 75CF, 65CF Bosch Alternator Voltage 24 V Charging current 80 A Version without belt pulley Flange 3-hole flange CF85, CF75, 65CF Bosch Alternator Voltage 24 V Charging current 00 A Version without belt pulley Flange 3-hole CF85, CF Bosch Alternator Voltage 24 V Charging current 0 A Version with pulley, clockwise direction of rotation CF Prestolite

177 Lighting and electrics 77 Alternator in exchange Voltage 24 V Charging current 80 A Version with pulley (poly V7) 2 CF CF Bosch Generator regulator Voltage 24 V suitable for 85CF, 75CF, 65CF Generator regulator Voltage 24 V CF Bosch F 00M A45 25

178 78 Bodywork Wind deflector suitable for DAF CF Euro 6 CF 2 Installation side Fig. right left Body parts suitable for DAF CF Euro 6 Description Fig. Headlamp trim, right Front grille, bottom Headlamp trim, left Headlamp beading for fog lamp, right Bumper Headlamp beading for fog lamp, left Cab mudguard suitable for DAF CF Euro 6 Installation location front axle Installation side Fig. right left

179 Bodywork CF 3 4 Body parts suitable for DAF CF Euro 6 Description Fig. Entry, right Entry box, right Trim for entry step box, right Trim for entry step box, left Entry box, left Entry, left ProTec Keine Kompromisse S wenn es um Sicherheit geht NO COMPROMISE ON SAFETY! BERAL Bremsbeläge Kompetenz in der Erstausrüstung When it comes to commercial vehicles, the safety of drivers and manufacturers. This clever technology ensures a permanent, welded their Nach intensiver cargo is Entwicklungsarbeit a top priority. Even sind BERAL though Scheibenbremsbeläge brakes are arguably auf Basis der connection between the spring and the brake pad s backplate. the ProTec most S -Technologie safety-critical von Knorr-Bremse component für on den any Actros vehicle, freigegeben they re worden. also Das Federal-Mogul Forschungs- und Entwicklungs-Team in Bad Camberg hat zwei neue What s in it for you vulnerable to faults resulting from improper fitment. Mischungen entwickelt je eine für Vorder- und Hinterachse, die hervorragende Werte The assurance of latest OE technology bei Bremsleistung, Lebensdauer und Fahrkomfort liefern. That s why BERAL is bringing to market the innovative pad Quick, error-free installation retaining system ProTec S that Knorr-Bremse has developed More efficient braking Da der Actros über eine dynamische Achslastverlagerung conjunction verfügt, with werden the unterschiedliche foremost European Bremsscheibe commercial übertreffen beide vehicle Beläge die Reduced brake noise and idle wear Bezogen auf die Materialabnutzung der in Bremsmomente an den jeweiligen Achsen benötigt. Für die Vorderachse (Bremssattel Knorr SM7) und für die Hinter achse (Knorr- Bremssattel SL7) bieten die Mischungen auch eine wirkungsvolle Wärmeableitung. Bremsrubbeln OE-Anforderungen, sodass auch hier eine längere Lebensdauer erreicht werden kann. Zur Reduzierung des Bremsgeräusches hat der Belag radiale Anschrägungen, die eine bessere Druckverteilung des Belages gewährden wird verhindert, gleichzeitig wer- leisten. Außerdem unterstützen diese auch bei hohen Temperaturen sehr gute Bremsleistungen erzielt, d. h. Sicherheit und Merkmale die Bremsleistung und das Verschleißverhalten maßgeblich. Komfort profitieren gleichermaßen.

180 80 Bodywork CF Wing, rear axle suitable for DAF CF Euro 6 Description Fig. Wing, front section, left Wing, front section, right Wing, centre section, left/right, 4 rubber tightening straps Wing, centre section, left/right, without rubber band clamps Wing, rear section, left Wing, rear section, right Support arm, offset, left/right Support arm, straight, left/right Wing bracket, left/right Clamping collar Silent block

181 Bodywork CF Body parts suitable for DAF CF85, CF75, CF65 Description Fig. Wind deflector, right Side, right Front panel, top Front grille, top Front panel, centre Front panel, bottom Side, left Wind deflector, left Gas spring for front flap Spring force Length 240 N 670 mm CF85, CF DAF

182 82 Bodywork CF Body parts suitable for DAF CF85, CF75, CF65 Description Fig. Headlamp trim, right Front grille, bottom Headlamp trim, left Headlamp beading for fog lamp, right Bumper, front, bottom section, with cutout for fog light Step-up for bumpers Headlamp beading for fog lamp, left

183 Bodywork CF Body parts suitable for DAF CF85, CF75, CF65 Description Fig. Wing extension, right Wing cover, right Entry, with wing, right Entry box, right Bracket, for tread, right Step-up, top, left/right Step-up, bottom, left/right Bracket, for tread, left Entry box, left Entry, with wing, left Wing cover, left Wing extension, left Flap for storage compartment suitable for Installation side CF85, CF75, CF65 right CF85, CF75, CF65 left

184 84 Bodywork 2 CF Wing, driver cab suitable for DAF CF85, CF75, CF65 Description Fig. Cab mudguard, right Wing bracket, right Cab mudguard, rear section, right Cab mudguard, with antispray, right Cab mudguard, with antispray, left Cab mudguard, rear section, left Wing bracket, left Cab mudguard, left Wing, rear axle suitable for DAF CF85, CF75, CF65 Description Fig. Wing, front/rear part, left/right Wing, centre section, left/right Tightening strap rubber Support arm, offset, left/right Clamping collar

185 Cab 85 Truck driver's seat 6860/875 NTS automatic weight adjustment with connection to the vehicle pneumatic system, with pressure permanently at least 7.5 bar, built-in 3-point safety belt system, adjustable upper belt diverter, height adjustment with memory function, seat back adjustment, shoulder adjustment, lean and horizontal settings, adjustable vertical movement damper, on/off horizontal springing, adjustable seat cushion depth, integrated pneumatic system (IPS) for adjustment of backrest to individual body contour (lumbar support and adjustable side support), rapid lowering, grey/anthracite seat covering with fi ne silver coloured stripes Version Standard, can be operated on the left Suspension pneumatic Track width 26 mm It is not permitted to use this item in vehicles with air bag systems, seat belt pretensioners and belt lock sensors! Armrests must be ordered separately. 2 CF (Illustration similar) suitable for CF Accessories Description Version Arm rest, left Standard Arm rest, right Standard Arm rest, left Luxury with textile cover Arm rest, right Luxury with textile cover Truck driver's seat 6860/875 NTS automatic weight adjustment with connection to the vehicle pneumatic system, with pressure permanently at least 7.5 bar, built-in 3-point safety belt system, adjustable upper belt diverter, height adjustment with memory function, seat back adjustment, shoulder adjustment, lean and horizontal settings, adjustable vertical movement damper, on/off horizontal springing, adjustable seat cushion depth, integrated pneumatic system (IPS) for adjustment of backrest to individual body contour (lumbar support and adjustable side support), rapid lowering, grey/anthracite seat covering with fi ne silver coloured stripes Version Comfort, operable on the left, with seat air-conditioning Suspension pneumatic Track width 305 mm It is not permitted to use this item in vehicles with air bag systems, seat belt pretensioners and belt lock sensors! Armrests must be ordered separately. Not suitable for drivers < 75 cm! (Illustration similar) suitable for CF Accessories Description Version Installed console Arm rest, left Luxury with textile cover Arm rest, right Luxury with textile cover Arm rest, left Standard Arm rest, right Standard

186 86 Cab 2 CF Wiper blade Length 600 mm with 5 adapters (Illustration similar) suitable for CF Euro 6, CF85, CF75, CF65, 85CF, 75CF, 65CF Wiper blade Length 600 mm CF Euro 6, CF85, CF75, CF65, 85CF, 75CF, 65CF SWF Wiper blade Visioflex Version Length with built-in wear warning contact and spoiler 600 mm 85CF, 75CF, 65CF SWF Wiper motor Installation location front Voltage 24 V CF85, CF Valeo

187 Cab 87 Main mirror Installation side left/right Voltage 24 V Width 228 mm Height 4 mm Curve radius 200 mm Assembly- 40 mm Material ABS Test mark II e 03*0007 Application range Left/right-hand drive with cover 2 CF suitable for Version Comparative no. CF Euro 6, CF85, CF75, CF65 heated, manual adjustment Mekra H CF Euro 6, CF85, CF75, CF65 heated, electric adjustment Mekra Accessories Description Comparative no. Glass unit Mekra H Cover for main mirror Mekra H Cover for retaining support, bottom, left Mekra H Cover for retaining support, bottom, right Mekra H Adapter cable Mekra Mounting bracket, outside mirror, 920 x 40 mm, left Mekra Mounting bracket, outside mirror, 920 x 40 mm, right Mekra Main mirror Installation side Voltage Width Height left/right 24 V 205 mm 384 mm Application range Left/right-hand drive complete, with 2-pole heating cable Depth 20 mm Curve radius 800 mm Assembly- 28 mm Test mark II e 0*0423 suitable for Version Comparative no. 85CF, 75CF, 65CF heated, manual adjustment Mekra H 85CF, 75CF, 65CF heated, electric adjustment Mekra H Accessories Description Comparative no. Glass unit Mekra H Cover Mekra H

188 88 Cab 2 CF Front mirror Version manual adjustment Installation side right Curve radius 240 mm Test mark IV e 03*096 suitable for Width Height Comparative no. CF85, CF75, CF mm 437 mm Mekra H CF85, CF75, CF mm 437 mm Mekra H CF85, CF75, CF mm 47 mm Mekra Wide angle mirror Voltage 24 V Height 239 mm Curve radius 300 mm Assembly- 40 mm Test mark IV e 03*0008 suitable for Installation side Version Width Comparative no. CF85, CF75, CF65 left/right heated, manual adjustment 22 mm Mekra H CF Euro 6*, CF85, CF75, CF65 left/right heated, electric adjustment 22 mm Mekra CF Euro 6 right heated, electric adjustment 243 mm Mekra *only suitable for installation on the left-hand side Accessories Description Comparative no. Glass unit, left/right* Mekra H Glass unit, right (CF Euro 6) Mekra Cover, left/right* Mekra.570.0H Cover, right (CF Euro 6) Mekra Adapter cable Mekra

189 Cab 89 Wide angle mirror Version heated Installation side left/right Voltage 24 V Width 70 mm Length 29 mm Curve radius 400 mm Material plastic with adapter cable 2 CF suitable for CF85, CF75, CF65, 85CF, 75CF, 65CF Accessories Description Mirror glass Wide angle mirror Installation side left/right Voltage 24 V Width 36 mm Height 209 mm Curve radius 300 mm Assembly- 28 mm Material ABS Test mark IV e 03*004 suitable for Version Comparative no. 85CF, 75CF, 65CF heated, manual adjustment Mekra H 85CF, 75CF, 65CF heated, manual adjustment, for heating cable (2-core, round angled connector) Mekra Accessories Description Comparative no. Glass unit Mekra H Cover Mekra H Wide angle mirror Version heated, manual adjustment Installation side left/right Voltage 24 V Width 70 mm Height 29 mm Curve radius 300 mm Assembly- 28 mm Material ABS Test mark IV e 02*0424 with cover 85CF, 75CF, 65CF Mekra H Accessories Description Comparative no. Glass unit Mekra H Cover Mekra H

190 90 Cab 2 CF Wide angle mirror Version heated, manual adjustment Installation side left/right Voltage 24 V Width 70 mm Height 29 mm Curve radius 400 mm Assembly- 28 mm Material ABS Test mark IV e 02*0424 with cover 85CF, 75CF, 65CF Mekra H Accessories Description Comparative no. Glass unit Mekra H Cover Mekra H Ramp mirror Version unheated, manual adjustment Installation side left/right Width 87 mm Height 39 mm Curve radius 300 mm Test mark V/VI e 03*0033 (Illustration similar) CF Euro 6, CF85, CF75, CF Mekra H Ramp mirror Version manual adjustment Width 24 mm Height 326 mm Curve radius 300 mm ECE-R46/04 approval CF85, CF75, CF Mekra

191 Cab 9 Window winder Version electric, with motor Installation location front CF 2 suitable for Installation side CF85, CF75, CF65 left CF85, CF75, CF65 right Washer fluid pump Version single pump, electric Voltage 24 V CF85, CF75, CF65, 85CF, 75CF, 65CF DAF Heat exchanger for interior heating Length Width Depth 370 mm 90 mm 43 mm (Illustration similar) CF Euro 6, CF85, CF75, CF65, 85CF, 75CF, 65CF DAF Heat exchanger for interior heating Version screwed on Length 370 mm Width 89 mm Depth 42 mm Application range for vehicles with and without headlight levelling CF85, 85CF, 75CF, 65CF HELLA 8FH

192 92 Cab 2 CF Heat exchanger for evaporator Length 307 mm Width 200 mm Depth 65 mm Application range for vehicles with air-conditioning with expansion valve CF Euro 6, CF85, CF75, CF HELLA 8FV Air-conditioning compressor Manufacturer's restriction Sanden Voltage 24 V Number of ribs Pulley 33 mm with pulley (Illustration similar) CF HELLA 8FK Air-conditioning compressor Manufacturer's restriction Sanden Voltage 24 V Number of ribs Pulley 33 mm CF85, CF75, 85CF, 75CF HELLA 8FK Air-conditioning compressor Connection straight Voltage 24 V Number of ribs 8 Pulley 9 mm CF85, CF DAF

193 Cab 93 Air-conditioning compressor Manufacturer's restriction Sanden Voltage 24 V Number of ribs 7 Pulley 40 mm (Illustration similar) CF DAF CF Condenser for air-conditioning Length Width Depth 504 mm 43 mm 6 mm CF DAF Condenser for air-conditioning systems Length 455 mm Width 432 mm Depth 6 mm without dryer CF85, CF75, CF65, 85CF, 75CF, 65CF HELLA 8FC Filter dryer for air-conditioning system CF85, CF75, CF HELLA 8FT Dryer for air-conditioning 85CF, 75CF HELLA 8FT

194 94 Cab 2 Expansion valve for air-conditioning CF CF85, CF HELLA 8UW Expansion valve for air-conditioning system CF HELLA 8UW Interior fan Voltage 24 V with housing CF85, CF75, 85CF, CF HELLA 8EW Interior fan Voltage 24 V Power 300 W Application range for vehicles with standard heating (Illustration similar) CF85, 85CF, 75CF, 65CF HELLA 8EW Electrical ballast for interior blower Voltage 24 V CF85, CF75, CF HELLA 9ML

195 Cab 95 Cabin filter This fi gure corresponds to suitable for Filter type Comparative no. CF Euro 6, CF85, CF75, CF65 Pollen fi lter Hengst E969LI MANN CU 2534 CF Euro 6, CF85, CF65 Activated charcoal fi lter Hengst E969LC MANN CUK 2534 CF75, CF65, 85CF, 75CF, 65CF Pollen fi lter Hengst E945LI MANN CU 4228 CF Cabin filter Filter type Pollen filter This fi gure corresponds to CF Euro 6, CF85, CF75, CF Hengst E969LI CF Euro 6, CF85, CF Hengst E969LC CF75, CF65, 85CF, 75CF, 65CF Hengst E945LI Driver cab tilting pump Version manual Outer thread M2 x,5/m4 x,5 Number of connections 3 CF85, CF DAF Driver cab tilt cylinder 48 mm Bore hole 28 mm suitable for Length Comparative no. CF65 72 mm DAF 4395 CF mm DAF 43952

196 96 3

197 97 3 LF Engine Drivetrain Suspension and damping Axles and steering Braking system Compressed air Lighting and electrics Bodywork...234, 235 Cab

198 98 Engine Engine Parts suitable for engine type PX-7 (Euro 6), installed in DAF LF Euro 6 3 LF Description Number per engine Cylinder head gasket Valve cover gasket Intake-manifold gasket Exhaust-manifold gasket Oil pan gasket Crankshaft seal, front Crankshaft seal, rear Cylinder head screw set Engine Parts suitable for engine type PX-5 (Euro 6), installed in DAF LF Euro 6 Description Number per engine Cylinder head gasket Valve cover gasket Intake-manifold gasket Exhaust-manifold gasket Oil pan gasket Crankshaft seal, front Crankshaft seal, rear Cylinder head screw set Central silencer Standard Euro 3 LF55, LF Dinex 2394 Accessories suitable for DAF LF55 Description Comparative no. Clamping piece, 0,6/2 mm Dinex Exhaust pipe clamp, 87,5-90,5 mm Dinex suitable for DAF LF45 Description Comparative no. Front pipe, Length 760 mm Dinex 225 Intermediate pipe, Length 730 mm Dinex 2245 Tailpipe, Length 94 mm Dinex 2757 Clamping piece, 0,6/2 mm Dinex Exhaust pipe clamp, 87,5-90,5 mm Dinex Clamping piece, mm Dinex Cup strap Dinex

199 Engine 99 Rear silencer Standard Euro 4/5 LF55, LF Dinex 2454 Accessories suitable for DAF LF55 3 LF Description Comparative no. Tailpipe Dinex 257 Tailpipe Dinex 2799 Clamping piece, Inner 88,9 mm Dinex 2895 Exhaust pipe clamp, Inner 02 mm Dinex Exhaust pipe clamp, 04,5 mm Dinex suitable for DAF LF45 Description Comparative no. Intermediate pipe, Length 72 mm Dinex Intermediate pipe, Length 378 mm Dinex 2282 Flexible pipe Dinex Exhaust pipe clamp, Inner 02 mm Dinex Clamping piece, Inner 88,9 mm Dinex 2895 Rear silencer Standard Euro 3 LF Dinex 2387 Accessories Description Comparative no. Tailpipe, Length 220 mm Dinex 2724 Exhaust pipe clamp, Inner 02 mm Dinex Exhaust turbocharger in exchange (Illustration similar) LF55, LF DAF R

200 200 Engine Radiator fan coupling without fan Version thermal Outer 205 mm 3 LF LF DAF Radiator fan Outer 50 mm Number of blades 0 without viscous clutch suitable for LF55, LF Charging pressure sensor LF55, LF Bosch Water pump Length 320 mm Width 240 mm Thickness 70 mm Impeller- 35 mm with gaskets LF DAF Water pump Length 52 mm Width 37 mm Thickness 35 mm Impeller- 35 mm with gasket LF Euro 6, LF55, LF DAF

201 Trucks Love it! Just seal it! Victor Reinz Sealing Technologies

202 202 Engine Oil filter LF 3 LF55, LF Hengst H9W0 MANN W 950/26 Oil filter Filter type Screw-on filter LF Euro 6, LF55, LF Hengst H9W0 Hydraulic filter for steering LF Euro 6, LF55, LF Hengst E0H02 MANN H 60/4 Knecht/Mahle HX 5 Hydraulic filter for steering LF Euro 6, LF55, LF Hengst E0H02

203 Engine 203 Fuel filter Filter type Screw-on filter 3 This figure corresponds to LF55, LF Hengst H90WK LF55, LF Hengst H296WK LF55, LF Hengst H8WK05 LF Air filter This figure corresponds to suitable for Filter type Comparative no. LF Euro 6, LF55, LF45 Filter insert Hengst E765L LF55, LF45 Filter insert Hengst E498L0 LF55, LF45 Screw-on filter Hengst H00WL Urea filter for AdBlue system Filter type Filter insert This figure corresponds to LF Euro Hengst E03U D295 LF55, LF Hengst E0U D324

204 204 Engine LF 3 Fuel cap for AdBlue Version Material with lock plastic LF DAF Engine radiator Length 525 mm Width 530 mm Depth 48 mm (Illustration similar) LF DAF Coolant expansion tank Volume 7 l Length 580 mm Width 30 mm Depth 46 mm suitable for LF55, LF Coolant expansion tank Volume l Length 69 mm Width 380 mm Depth 46 mm LF DAF Accessories Description Cover lid

205 Drivetrain 205 LF 3 Ribbed V-belt Size 8 PK 25 suitable for LF55, LF Ribbed V-belt Profi le 8 PK 25 HD suitable for Length LF55, LF45 25 mm LF55, LF mm LF55, LF mm LF55, LF mm LF mm Ribbed V-belt Size 8 PK 225 suitable for LF Ribbed V-belt set Profi le 8 PK with belt tensioner suitable for Length LF55, LF mm LF55, LF mm

206 206 Drivetrain Poly-V belt tensioner Version mechanical Outer 85 mm Roll width 32/54,5 mm 3 LF suitable for LF Poly-V belt tensioner Outer 86,5 mm Roll width 32 mm suitable for LF55, LF Deflection pulley/guide pulley for poly-v-belt Outer 65 mm This fi gure corresponds to suitable for Roll width LF45 32/57 mm LF45 32/35 mm Deflection pulley/guide pulley for poly-v-belt Outer 65 mm Roll width 32 mm suitable for Version LF55, LF45 long thread LF55, LF45 short thread

207 Drivetrain 207 Clutch kit XTend Version automatic suitable for Comparative no. LF mm Sachs LF55, LF mm Sachs LF Clutch kit in exchange Version automatic 395 mm Number of teeth 0 Toothed hub profile 38,2x44,5-0N LF Sachs Clutch kit in exchange suitable for Comparative no. LF Euro mm Sachs LF Euro mm Sachs LF Euro mm Sachs LF55, LF mm Sachs LF mm Sachs Clutch kit in exchange Number of teeth mm LF55, LF LuK LF55, LF LuK LF LuK Clutch kit 395 mm Number of teeth 0 LF55, LF Valeo

208 208 Drivetrain 3 LF Clutch plate 362 mm Number of teeth 0 Toothed hub profile /2 LF LuK Clutch plate Parameter 360TZFV 360 mm Number of teeth 0 LF Euro LuK Clutch plate in exchange suitable for Parameter Number of teeth Toothed hub profile Comparative no. LF Euro 6, LF45 362WGTZ 362 mm 0 /2"-0N Sachs LF Euro 6 350WGTZ 350 mm 3/4" Sachs LF55, LF45 362WGTZ 362 mm 0 3/4"-0N Sachs Coupling pressure plate suitable for Parameter Comparative no. LF Euro 6, LF45 MF mm Sachs LF Euro 6 MF mm Sachs

209 EASY TO INSTALL. Difficult to break. FAG SmartSET the ready-to-fit repair solution for truck wheel bearings. Pre-assembled, pre-greased, pre-positioned the FAG SmartSET was developed exclusively for the spare parts market, based on the needs of the garage. The new repair solution for truck and trailer minimizes downtime for repairs and maximizes service life. Further information:

210 20 Drivetrain 3 Coupling pressure plate in exchange Parameter MF mm LF LF Sachs Clutch releaser Parameter KZIS-4 LF Euro 6, LF Sachs LF Euro 6, LF Sachs Clutch releaser Parameter KZIS-4 LF55, LF LuK Clutch servo Version mechanical Connection M6 x.5/m4 x.5 Piston 80 mm Stroke 85 mm (Illustration similar) LF Knorr AM LF Knorr AM

211 Suspension and damping 2 Air spring Installation location rear axle Version with steel piston Piston 230 mm upper attachment: 3 x M6 studs lower attachment: M6 matching bolt kit LF LF55, LF Conti 836 M2 K 2 3 Air spring suitable for Version Piston Bolt set Fig. Comparative no. LF Euro 6, LF55, LF45 with steel piston 220 mm Conti 836 M K LF Euro 6, LF45 with steel piston 240 mm Conti D 23 G- LF55, LF45 with steel piston 85 mm Phoenix 887 M K4 LF55, LF45 with plastic piston 242 mm Conti 792 N P0 Air spring Version double bellows Air connector M6 x,5 Thread 4 x M8 Outer mm of cover 286 mm Height 264 mm Distance between holes 58,8 mm LF55, LF Conti FD P03

212 22 Suspension and damping Shock absorber 3 LF (Illustration similar) suitable for Installation location Fastening Comparative no. LF55 front axle pin/pin Sachs LF55 rear axle pin/pin Sachs LF45 front axle pin/pin Sachs LF45 front axle pin/pin Sachs 3 63 LF45 front axle pin/pin Sachs 3 62 LF45 front axle Pin/pin Sachs LF45 rear axle pin/pin Sachs LF45 rear axle pin/pin Sachs LF45 rear axle pin/pin Sachs 3 64 LF45 rear axle pin/eye Sachs Leaf spring Axle load 3,8 t Number of leaves Form 7 Width 76 mm Bushing rear 6/45 mm Bushing front Installation location Length Thickness 6/45 mm front axle 950/950 mm 35 mm (Illustration similar) LF Euro 6, LF DAF Leaf spring Number of leaves / Form BK Width 75 mm Bushing rear 6/45 mm Bushing front 6/45 mm Installation location Length Thickness Camber rear axle 870/870 mm 74 mm 09 mm LF DAF Leaf spring Number of leaves 2 Width 75 mm Bushing rear 7/49 mm Bushing front 7/49 mm Installation location Length Thickness Camber rear axle 80/564 mm 58 mm 8 mm (Illustration similar) LF Euro 6, LF DAF Leaf spring Installation location rear axle This fi gure corresponds to suitable for Bushing front Bushing rear Thickness Width Camber Comparative no. LF Euro 6, LF55 7/49 mm 7/49 mm 04 mm 75 mm 2 mm DAF LF Euro 6, LF55 9/49 mm 8/49 mm 99 mm 90 mm 59 mm DAF

213 Suspension and damping 23 Leaf spring Form BK Width 90 mm Bushing rear 8/52 mm Bushing front 9/52 mm Installation location Length Thickness Camber rear axle 945/85 mm 99 mm 4 mm LF Euro 6, LF DAF LF 3 Leaf spring Number of leaves 3 Form K Width 90 mm Bushing rear 8/52 mm Bushing front 9/52 mm Installation location Length Thickness Camber rear axle 950/565 mm 82 mm 0 mm LF Euro 6, LF DAF Silent bush for spring eye Installation location Length Outer Inner Front axle 86 mm 62,9 mm 24,2 mm LF DAF Spring bushing Installation location front axle This fi gure corresponds to suitable for Installation side Length Outer Inner Material Comparative no. LF55, LF45 inner 52,5 mm 3 mm 26 mm Brass DAF LF55, LF45 outer 75,5 mm 39 mm 3/35 mm steel DAF Pitman spring Form 62 Z Width 75 mm Crank 290 mm Installation location rear axle Length Thickness Camber 590/535 mm 47 mm 27 mm LF DAF 40325

214 24 Axles and steering 3 Drag-link Version adjustable on one side with accessories LF suitable for Length Cone- Pipe Comparative no. LF Euro 6, LF45 889,5 mm 22 mm 38 mm Lemförder LF mm 26 mm 4 mm Lemförder LF55 99 mm 26 mm 4 mm Lemförder LF mm 26 mm 4 mm Lemförder LF mm 26 mm 4 mm Lemförder LF mm 30 mm 46 mm Lemförder LF mm 26 mm 4 mm Lemförder LF45 889,5 mm 22 mm 38 mm Lemförder LF45 895,5 mm 22 mm 38 mm Lemförder LF45 895,5 mm 22 mm 38 mm Lemförder LF mm 22 mm 38 mm Lemförder Drag-link PROEQUIP Length 930 mm Cone- 26 mm Pipe 46 mm with accessories LF TRW JTR050 Ball joint for steering rod/track rod Installation location with accessories front axle suitable for Length Cone- Thread Threadtype Comparative no. LF Euro 6, LF45 07 mm 22 mm M30 x,5 left-hand thread, outside TRW JTE304 LF55 95 mm 30 mm M24 x,5 right-hand thread, inner Lemförder TRW JTE007

215 Axles and steering 25 Ball joint for track rod Length 7 mm Cone- 26 mm Outer thread M28 x,5 with accessories 3 LF suitable for Threadtype Comparative no. LF45 left-hand thread TRW JTE3522 LF45 right-hand thread TRW JTE352 Ball joint for steering rod/track rod Length 07 mm Cone- 22 mm Outer thread M30 x,5 Threadtype left-hand thread LF Euro 6, LF TRW JTE304 Ball joint PROEQUIP, for steering rod/track rod Length 95 mm Cone- 30 mm Inner thread M24 x,5 Threadtype right-hand thread LF TRW JTE007 Ball joint for track rod Length 48 mm Cone- 26 mm Outer thread M28 x,5 with accessories suitable for Threadtype Comparative no. LF45 left-hand thread TRW JTE3538 LF45 right-hand thread TRW JTE3537

216 26 Axles and steering 3 LF Ball joint Installation location front axle Cone- 30 mm Inner thread M24 x,5 Threadtype right-hand thread suitable for Length Comparative no. LF Euro 6 20 mm Lemförder LF55 95 mm Lemförder Ball joint for axle strut Installation side right Thread M4 x,5 Length 94 mm LF DAF Stabilizer mounting Installation side left/right This fi gure corresponds to suitable for Installation location Length Outer Inner Comparative no. LF45 front axle 68 mm 53 mm 27 mm DAF LF45 front axle, outer 54/30 mm 42 mm 7 mm DAF LF45 front axle, outer 42 mm 65 mm 35 mm DAF Repair kit for kingpin Length 72 mm Outer 32 mm with bearing LF DAF Repair kit kingpin Length 72 mm Outer 32 mm single kit, with bearing LF DAF

217 Axles and steering 27 Repair kit for "A" frame Installation location Length Thickness Distance between centres Bore hole Outer rear axle 95 mm 24 mm 52 mm 23 mm 85 mm 3 LF DAF LF Wheel nut Height 26 mm 45 mm Spanner size 30 mm Thread M20 x,5 Class 0 Standard DIN 7436 H LF Euro 6, LF55, LF DAF Wheel nut with middle centering Installation location Height front axle/rear axle 27 mm 46 mm Spanner size 32 mm Thread M22 x,5 Standard DIN 7436 Comparative no DAF Tapered roller bearing Type Inner 30 mm Outer 62 mm Height 2,25 mm (Illustration similar) LF DAF

218 28 Axles and steering Tapered roller bearing LF 3 This fi gure corresponds to suitable for Outer Inner Width Comparative no. LF45 62 mm 30 mm 2,25 mm DAF LF45 2,7 mm 66,68 mm 30,6 mm DAF Wheel bearing Outer 2,7 mm Inner 57,5 mm Width 30,6 mm LF SKF VKHB 2088 Wheel bearing This fi gure corresponds to suitable for Outer Inner Width Comparative no. LF55, LF45 24,7 mm 70 mm 0 mm FAG H95 LF45 95 mm 55 mm 29 mm FAG Lubricant sensor automatic, filled with special grease, transparent container for visual check, LED status display Application range high temperatures and loads, pivot bearing Contents Comparative no. 25 ml DAF

219 Braking system 29 Brake caliper Installation location front axle Brake system PAN 7 without brake lining you'll find a suitable brake caliper key on page 276 LF 3 suitable for Installation side Comparative no. LF45 left WABCO LF45 right WABCO Brake caliper Installation location front axle/rear axle Brake system PAN 9- Plus Application range Sliding caliper compressed air disc brake without brake lining suitable for Installation side Comparative no. LF55 left WABCO LF55 right WABCO Brake caliper Installation location front axle Brake system PAN 7 suitable for Installation side Comparative no. LF Euro 6, LF45 left WABCO LF Euro 6, LF45 right WABCO Repair kit Seals and pin rods per brake: safety cap, cylinder bolts, pin rod, seals, bushes LF Euro 6, LF WABCO VT

220 220 Braking system LF Brake pad set Version prepared for wear warning indicator suitable for Installation location Brake system WVA no. Coating length Lining width Lining thickness Fig. LF55 Front axle/rear axle SB/SM ,5 mm 09,5 mm 30,00 mm LF55 front axle/rear axle SB/SN , 2906, 29087, 2908, ,5 mm 09,5 mm 30,00 mm LF55 front axle/rear axle PAN ,5 mm 92 mm 29,00 mm LF45 front axle/rear axle PAN ,5 mm 85,6 mm 26,00 mm specifi cally for short-distance use Brake pad set Version prepared for wear indicator Brake system PAN 7 WVA no Coating length 75,6 mm Lining width 82,5 mm Lining thickness 26,00 mm LF Euro 6, LF Textar Brake pad set Version prepared for wear warning indicator Brake system PAN 7 WVA no Coating length 76 mm Lining width 83 mm Lining thickness 26,00 mm without accessories LF Beral

221 Braking system 22 LF 3 Brake pad set Installation location front axle/rear axle Brake system PAN 7 with accessories LF Euro 6, LF WABCO VT Brake disc Version internally ventilated Outer 330 mm Suitable brake piston resetting tools available from EUROPART! This fi gure corresponds to suitable for Installation location Number of holes Hole circle Thickness Comparative no. LF45 rear axle 2 75 mm 9 mm DAF LF45 front axle 6 55 mm 34 mm DAF Brake pad sensor WVA no Length 323 mm (Illustration similar) suitable for LF

222 222 Compressed air 3 Air dryer cartridge Version with coalescence fi lter Threadtype right-hand thread Operating pressure max. 3 bar Connection thread M4 x.5 LF LF Euro 6, LF55, LF WABCO Air dryer cartridge Threadtype right-hand thread Operating pressure max. 4 bar Thread M4 x,5 Height 35 mm Application range Suitable for all air dryer types with standard screw-on cartridge connection Complete with sealing rings LF Euro 6, LF55, LF Knorr II4300F Four-circuit protection valve with safety venting in spring actuator circuit, controlled through circuit Thread Opening pressure Closing pressure M6 x,5/m22 x,5 NG2 VOSS 2-24: 9 bar 2-24: 9 bar LF Knorr II3900FN50 ABS pressure control valve LF Knorr K038438N50

223 Compressed air 223 Pressure control valve Connection electric, bayonet (DIN)72585 Connection thread M22 x.5 JED-388 Operating pressure max. bar Voltage 24 V Protection class IP67 LF55, LF WABCO LF Accessories Description Comparative no. Adapter cable WABCO Pressure control valve for Voss 230 Connection electric, bayonet (DIN)72585 Connection thread M22 x.5 Operating pressure max. 3 bar Voltage 24 V LF WABCO Repair kit for pedal unit shaft, support with bolt, clamp, coupling system, TORX bolt with clamp For pedal units that were manufactured before 03/2003, WABCO pedal must be used, LF55, LF WABCO Repair kit for pedal unit foot brake valve, 4 mounting bolts, seal, 2 clamps, anchor plate LF55, LF WABCO

224 224 Compressed air 3 LF ABS relay valve Connection M22 x.5 reserve Connection 2 M22 x,5 exit Connection 4 M6 x,5 control connection Operating pressure 3 bar Height 0 mm Width 04 mm LF Knorr AC574AXY Relay valve Connection M22 x,5/m6 x,5, bayonet only for spring brake chamber circuit LF Euro 6, LF55, LF Knorr AC577B Alternating check valve Connection M6 x.5 reserve Connection 2 M6 x,5 outlet LF55, LF Knorr Trailer control valve Thread M6 x,5 Pressure lead 0,2 bar LF Knorr AC597BA

225 Compressed air 225 Muffler Version Snap connection Type ZB369 3 Comparative no Knorr II4063F LF Speed sensor for ABS Form Length Plug type straight 300 ± 0 mm round LF Knorr Speed sensor set Type S plus Version coupling socket Length 700 mm with grease and clamp bush LF55, LF WABCO Speed sensor set for disc brake Type S plus Version with coupling socket Length 350 mm with grease and clamp bush LF55, LF WABCO

226 226 Compressed air 3 LF Speed sensor for ABS/EBS Type Length S plus 700 mm LF55, LF WABCO Pressure sensor Connection M6 x.5, bayonet (DIN), DIN A-3. Operating pressure 6 bar Voltage 8-32 V resolution 400 mv/bar LF WABCO Coupling head automatic Version with valve Connection thread M6 x,5 This fi gure corresponds to suitable for Colour Comparative no. LF45 red WABCO LF45 yellow WABCO Coupling head Version self-sealing Connection M6 x,5 suitable for Type Colour Comparative no. LF55, LF45 KU424 red Knorr K00423 LF55, LF45 KU428 yellow Knorr K

227 Compressed air 227 ECAS path sensor Connection Bayonet DIN A-2.-Sn/K2 Version with lever LF Euro 6, LF55, LF WABCO LF 3 ECAS solenoid valve Operating pressure max. 5-3 bar Protection class IP6K9K Voltage 24 V LF WABCO ECAS solenoid valve Operating pressure 5-3 bar Voltage 24 V LF WABCO Operating unit ECAS/ELM Version 9-pole Voltage 24 V connector version ID (Illustration similar) LF WABCO

228 228 Lighting and electrics 3 LF H/H7 main headlamp Version with dipped beam, indicator, high beam, position and LED daytime running light Bulb type H/H7/P2W Voltage 24 V Application range for vehicles without headlight levelling with bulbs suitable for Installation side Comparative no. LF Euro 6 left HELLA EJ LF Euro 6 right HELLA EJ you'll find ball joint separators on page 287 H7/H main headlamp Version with dipped beam, indicator, high beam and position light Bulb type H7/H/P2W/W5W Voltage 24 V with bulbs suitable for Installation side Application range Comparative no. LF55, LF45 left for vehicles without headlight levelling HELLA EJ LF55, LF45 right for vehicles without headlight levelling HELLA EJ LF55, LF45 left for vehicles with headlight levelling (electric) HELLA EJ LF55, LF45 right for vehicles with headlight levelling (electric) HELLA EJ H3 fog light Version with high beam Bulb type H3/H3 Voltage 24 V with bulbs suitable for Installation side Comparative no. LF55 (0/2006-), LF45 (0/2006-) left HELLA PE LF55 (0/2006-), LF45 (0/2006-) right HELLA PE

229 Lighting and electrics 229 H fog light Bulb type H Voltage 24 V Design FF/Halogen Type flush-mounting Application range for vehicles with cornering lights with bulb 3 LF suitable for Installation side Comparative no. LF Euro 6 left HELLA ND LF Euro 6 right HELLA ND H fog light Version with main beam Bulb type H/H3 Voltage 24 V housing with headlamp insert and pre-fi tted bulbs, without frame suitable for Installation side Comparative no. LF55, LF45 left HELLA 9BG LF55, LF45 right HELLA 9BG Accessories Description Headlight frame, left Headlight frame, right Indicator light ICDL94 Bulb type P2W Voltage 24 V Lens colour yellow without bulb carriers LF Euro 6, LF55, LF Vignal 9550 Accessories Description Comparative no. Bulb holder Vignal 0066

230 230 Lighting and electrics 3 LF End-outline marker lamp Installation location front Installation side left/right Bulb type W5W Voltage 2/24 V Width 40 mm Height 30 mm Depth 65 mm Lens colour clear LF55, LF Vignal 9500 Side marker light Version Installation side Bulb type Voltage Width Height Depth Lens colour Type with bulb holder with reflector left/right W5W 2/24 V 0 mm 50 mm 8 mm yellow surface-mounting approved for vehicles in accordance with GGVS/ADR LF Vignal Accessories This fi gure corresponds to Description Comparative no. Bulb holder, AMP JPT, 2-pin, with sealing ring Vignal Bracket, 90, angled Vignal 0076 LED rear light Voltage 24 V Connection connector, lateral (8-pin) Width 403,5 mm Height 59 mm Depth 92 mm approved for vehicles in accordance with ADR/GGVS suitable for Installation side Version Comparative no. LF Euro 6 left with indicator, stop, licence plate, rear fog, tail, reversing, side marker and clearance light, refl ector (full LED) LF Euro 6 right with indicator, stop, rear fog, reversing, tail, side marker and clearance light, refl ector (full LED) HELLA 2VD HELLA 2VP Accessories Description Comparative no. Lens, left/right HELLA 9EL

231 Lighting and electrics 23 Indicator Version for LED lamps, type 2VD/2VP Voltage 24 V Number of poles 4 with bracket LF55, LF HELLA 4DW LF LED control unit Version for LED flashing light Voltage 24 V Number of poles 5 Comparative no HELLA 5DS Rear light LC5V Bulb type P2W/R0W Voltage 24 V Lens colour red/clear/yellow Connection AMP.5 (round connector), rear Width 350 mm Height 30 mm Depth 83 mm approved for vehicles in accordance with GGVS/ADR This fi gure corresponds to suitable for Installation side Version Comparative no. LF55, LF45 left-hand side with indicator, brake, number plate, rear fog, reversing and tail light, refl ector Vignal 5270 LF55, LF45 left/right with indicator, brake, rear fog, reversing and tail light, refl ector Vignal 5280 Accessories Description Comparative no. Lens, with reflector Vignal Connecting plug AMP.5, 7-pin, straight Vignal D868

232 232 Lighting and electrics 3 LF Rear light LC7 Voltage 24 V Lens colour red/clear/yellow Connection AMP.5, lateral Width 464 mm Height 30 mm Depth 83 mm Pin spacing 52 mm approved for vehicles in accordance with GGVS/ADR This figure corresponds to suitable for Installation side Version Comparative no. LF55, LF45 left with indicator, stop, licence plate, rear fog, reversing, side marker, tail and clearance light, reflector LF55, LF45 right with indicator, brake, rear fog, reversing, taillight and side marker light, reflector Vignal Vignal 6970 Accessories Description Comparative no. Lens, with reflector, left/right Vignal Connecting plug AMP.5, 7-pin, straight Vignal D868 Reversing alarm, left Vignal D2953 Starter Motor Voltage 24 V Power 4 kw Pinion teeth 0 Flange 3-hole LF55, LF Bosch Alternator Voltage 24 V Charging current 55 A Version without belt pulley Flange 3-hole LF55 (05/2006-) Bosch

233 Lighting and electrics 233 Alternator Voltage 24 V Charging current 0 A Version with pulley, clockwise direction of rotation 3 LF Euro 6, LF55, LF Prestolite LF Generator regulator Voltage 24 V LF55, LF Bosch F 00M A45 25

234 234 Bodywork 3 2 LF Body parts suitable for DAF LF55, LF45 Description Fig. Air deflector, right Front panel, wide Front grille, top Front panel, narrow Front grille, complete with front panel, broad and narrow Air deflector, left

235 Bodywork LF Body parts suitable for DAF LF55, LF45 Description Fig. Bumper, top Grid for bumpers, top Bumper end piece, right Bumper, bottom, without cutout for fog light Bumper end piece, left Entry suitable for DAF LF55, LF45 Version with wing Installation side Fig. right left

236 236 Cab 3 Wiper blade Contents 2 pieces Length 600/600 mm LF suitable for Version Comparative no. LF55, LF45 with integrated washer nozzle on top, with pipe connector SWF LF55, LF45 with integrated washer nozzle on underside, with pipe connector SWF Wiper blade Visioflex Version Length with spoiler, integrated washer nozzle and integrated wear warning contact 600 mm LF55, LF SWF Complete mirror system Version heated, electric adjustment Voltage 24 V Width 440 mm Depth 55 mm Curve radius 200/300 mm Arm length 200 mm Test mark II e 03*0009 main mirror, wide angle mirror, rod, transmission, cover suitable for Installation side Comparative no. LF55, LF45 (05/2003-) left Mekra H LF55, LF45 (05/2003-) right Mekra H Accessories Description Comparative no. Glass unit for main mirror Mekra H Glass unit for wide angle mirror, left Mekra H Glass unit for wide angle mirror, right Mekra H Mounting bracket, outside mirror, left Mekra H Mounting bracket, outside mirror, right Mekra H

237 Cab 237 Complete mirror system Version heated, electric adjustment Voltage 24 V Width 340 mm Depth 55 mm Curve radius 200/300 mm Material ABS Test mark IV e 03*0037 main mirror, wide angle mirror, rod, transmission, cover 3 LF suitable for Installation side Comparative no. LF55, LF45 (05/2003-) left Mekra H LF55, LF45 (05/2003-) right Mekra H Accessories Description Comparative no. Glass unit for main mirror Mekra H Glass unit for wide angle mirror, left Mekra H Glass unit for wide angle mirror, right Mekra H Mounting bracket, outside mirror, left Mekra H Mounting bracket, outside mirror, right Mekra H Mirror head for main mirror Voltage 24 V Width 245 mm Height 370 mm Depth 05 mm Test mark II e 03*0009 suitable for Version Installation side Comparative no. LF55, LF45 (05/2003-) manual adjustment left/right Mekra H LF55, LF45 (05/2003-) electric adjustment right Mekra H LF55, LF45 (05/2003-) electric adjustment left Mekra H LF55, LF45 (05/2003-) for gearing left/right Mekra H Accessories Description Comparative no. Cover for main mirror, left/right Mekra H Cover for mirror holder, left Mekra H Cover for mirror holder, right Mekra H Adapter cable Mekra

238 238 Cab 3 LF Mirror head Version heated, manual adjustment Voltage 24 V Width 236 mm Height 245 mm Material ABS Test mark IV e 03*0037 without glass unit suitable for Installation side Comparative no. LF55, LF45 (05/2003-) left Mekra H LF55, LF45 (05/2003-) right Mekra H Accessories Description Comparative no. Cover Mekra H Main mirror Version heated, manual adjustment Installation side left/right Voltage 24 V Width 93 mm Height 382 mm Curve radius 200 mm Assembly- 22 mm Test mark II e3 02*56297 complete LF55, LF45 (03/ /2006) Mekra H Main mirror Version heated, electric adjustment Installation side left/right Voltage 24 V Width 205 mm Height 395 mm Curve radius 200 mm Material ABS Assembly- 22 mm Test mark II e3 02*56297 complete LF55, LF45 (03/ /2006) Mekra H Accessories Description Comparative no. Glass unit Mekra H Cover Mekra

239 Cab 239 Wide angle mirror Version heated, manual adjustment Installation side left/right Voltage 24 V Width 99 mm Height 99 mm Curve radius 300 mm Assembly- 22 mm Material ABS Test mark IV e 03*085 3 LF LF55, LF45 (03/ /2006) Mekra H Accessories Description Comparative no. Glass unit Mekra H Ramp mirror Version unheated, manual adjustment Installation side right Width 229 mm Height 260 mm Depth 70 mm Curve radius 300 mm Test mark V e 03*00 with mirror holder LF55, LF45 (05/2003-) Mekra H Ramp mirror Version manual adjustment Installation side right Width 24 mm Height 326 mm Curve radius 300 mm ECE-R46/04 approval LF55, LF Mekra Front mirror Version manual adjustment Installation side right Curve radius 300 mm Test mark V / VI e 03*0033 This fi gure corresponds to suitable for Height Width Depth Comparative no. LF55, LF45 (05/2003-) 725 mm 39 mm 26 mm with retaining element Mekra LF55, LF45 (05/2003-) 36 mm 86 mm 77 mm without retaining element Mekra H

240 240 Cab 3 LF Window winder Version electric, with motor Installation location front suitable for Installation side Comparative no. LF55, LF45 left Valeo LF55, LF45 right Valeo Evaporator for air-conditioning Length 308 mm Width 200 mm Depth 40 mm with expansion valve and seals LF55, LF HELLA 8FV Air-conditioning compressor Voltage 24 V Number of ribs 8 Pulley 9 mm LF55, LF Valeo Condenser for air-conditioning Length Width Depth 504 mm 43 mm 6 mm LF55, LF DAF Interior fan Voltage 24 V Application range vehicles without air conditioning LF55, LF HELLA 8EW

241 Cab 24 Interior fan Voltage 24 V 3 LF55, LF Valeo LF Interior fan Voltage 24 V LF55, LF HELLA 8EW Cabin filter Filter type Pollen filter LF55, LF Hengst E2927LI MANN CU 2303 Cabin filter Filter type Pollen filter LF Euro 6, LF55, LF Hengst E3943LI LF55, LF Hengst E2927LI

242

243 243 Technical equipment and accessories 4 Add-on parts Universal truck styling...248, 249 On-board equipment Universal compressed air Starter batteries...254, 256 Bulbs Lighting Warning markers Emergency equipment...274, 275 Special tools Workshop equipment Occupational health and safety

244 244 Add-on parts 4 Technical equipment and accessories Toolbox Material polypropylene This fi gure corresponds to Width x height x depth 40 x 340 x 348 mm x 400 x 400 mm x 450 x 480 mm x 500 x 470 mm x 500 x 450 mm x 520 x 500 mm Accessories Description suitable for Bracket set, vertical, hot-galvanised, incl. mounting kit tool box Bracket set, vertical, hot-galvanised, incl. mounting kit tool box Bracket set, horizontal, hot-galvanised, incl. mounting kit tool box Bracket set, horizontal, hot-galvanised, incl. mounting kit toolbox Trailer hitch automatic Version hand lever upwards Type Bolt- Drawbar load Hole pattern V-value D-value DC value RO* mm 000 kg 40 x 80 mm 3,2 kn 00 kn 9,5 kn RO* mm 000 kg 60 x 00 mm 35 kn 30 kn 90 kn RO* mm 000/2500 kg 60 x 00 mm 90/60 kn 200 kn 40 kn

245 Add-on parts 245 Fifth wheel with extended handle and rubber joint bearing Fastener 2" Vertical load on the fifth wheel 20 t D-value 52 kn Type Height JSK 37 C50 ZJ 50 mm JSK 37 C85 ZJ 85 mm Service parts This fi gure corresponds to Description Repair kit for lock Repair kit for mounting Technical equipment and accessories Fifth wheel with sliding discs and LubeTronic Fastener 2" Vertical load on the fifth wheel 20 t D-value 52 kn Type Height JSK 37 C AA 50 mm JSK 37 C AA 85 mm Service parts This fi gure corresponds to Description Repair kit for lock Repair kit for mounting Slide pad set Fifth wheel with sliding discs and LubeTronic Fastener 2" Vertical load on the fifth wheel 20 t D-value 52 kn Type Height JSK 42 K AA 50 mm JSK 42 K AA 85 mm Service parts This fi gure corresponds to Description Repair kit for lock Repair kit for mounting Slide pad set

246 246 Add-on parts Fifth wheel with plain bearings Fastener 2" Vertical load on the fifth wheel 20 t D-value 52 kn 4 Technical equipment and accessories Type Height JSK 42 K AA 50 mm JSK 42 K AA 85 mm High performance grease for the Jost LubeTronic 5Point central lubrication system for fifth wheel couplings The use of any other kind of grease will cause invalidation of the warranty. Contents Container 2 x 400 ml Cartridge kg Barrel Grease supply sufficient for about year

247 Reduce your downtimes. Rely on our fast delivery service. The EUROPART delivery service: Put your vehicle back on the road faster with our reliable logistics network Speed is the key. So we leave nothing to chance when it comes to logistics. In our central warehouse in Werl, Germany, approximately 60,000 parts are permanently held in stock across 98,000 m² of storage space, and over 2,000 orders are processed each day. This enables us to supply our branches quickly with spare parts and workshop supplies, helping them to provide fast and customer-oriented solutions. We offer various delivery options: Overnight express service: overnight delivery of parts ordered. Express courier delivery: urgent orders are dispatched immediately by express delivery. EWOS orders: Orders received before 7:30 p.m. through the EUROPART Workshop Online System are prepared for delivery the next day. Collection service: You can, of course, also collect the parts you have ordered from our nearest branch. EUROPART Europe's No. for truck, trailer, van and bus spare parts.

248 248 Universal truck styling 4 Technical equipment and accessories Air horn kit Original HS Length 67/76 cm Material Stainless steel complete mounting set Signal horn 00 mm Frequency 355 Hz Power consumption 60 W Voltage 2 V Wheel cover Classic Front axle Supersingle, rear axle disc-braked Size 22,5" Installation location front/rear Material Stainless steel Version Fig. closed design open Wheel cover Grand Prix Version with snap ring holder Size 22,5" Material Stainless steel Installation location Fig. front rear Wheel cover Version with snap ring holder Size 22,5" Material Stainless steel Installation location Fig. front rear

249 Universal truck styling 249 Wheel cover Type, universal fit - fast fitting (approx. 2 minutes per wheel) - no loosening of wheel bolts or nuts necessary - the wheel can be removed without the cap having to be removed Size 22,5" Material Stainless steel Application range for all rims with strongly swung rim flange Central cap not included in the scope of supply - please order separately Installation location front rear Accessories Description Central cap Technical equipment and accessories Wheel stud cover ring closed design Size 22,5" Number of holes 0 Material Stainless steel Version for steel wheels for aluminium rims Wheel stud cover ring open Version for steel wheels Size 22,5" Number of holes 0 Material Stainless steel Wheel nut cap Spanner size 32 mm mm

250 250 On-board equipment 4 Technical equipment and accessories Compressor cool box CoolFreeze CDF-35 fully hermetic compressor with integrated control electronics, undervoltage protection for starter battery, electronic fuse/automatic reverse polarity protection, dynamically ventilated wire tube condenser, aluminium rollbond evaporator, heat dissipation to the outside using brushless, non-wearing fan, removable cover (cover stop at the front), digital display, LED interior light Volume 3 l Voltage 2/24 V DC Width x height x depth 560 x 380 x 340 mm Weight 7 kg power consumption: 0.75 Ah/h at +20 C ambient temperature,.3 Ah/h at +32 C ambient temperature (each with +5 C temperature inside) average power consumption approx. 45 W Application range for normal cooling and refrigeration DC connection cable TÜV/GS tested, e-certified Cool box TropiCool 7-level temperature control in heating and cooling operation, LED temperature display, memory function saves the last setting, membrane keyboard protects electronics from dust and moisture, thermoelectric (Peltier system), cooling to 30 C below the ambient temperature, heating to +65 C, TC special electronics, priority switching for mains operation, intelligent energy switching, dynamic interior ventilation, non-wearing fan, polyurethane (PU) foam insulation Voltage 2/24 V Energy efficiency class A++ Material die casting Colour dark grey/light grey Energy consumption (2 V) 46 W Energy consumption (24 V) 50 W Energy consumption (230 V) 64 W TÜV/GS tested, e-certified This fi gure corresponds to Model Volume Width x height x depth Weight TCX 2 20 l 450 x 420 x 303 mm 6 kg TCX l 550 x 460 x 376 mm 0 kg

251 On-board equipment 25 Cool box CoolFun CX-8 standing height for.5 litre deposit bottles, can be switched between cold/warm, cable compartment integrated in the lid Volume 8 l Voltage 2/24 V DC Width x height x depth 390 x 380 x 290 mm Weight 4,3 kg cooling max. approx. 20 C at ambient temperature, heating approx. +65 C average power consumption 42 W DC connection cable TÜV/GS-tested Technical equipment and accessories Kettle PerfectKitchen MCK rugged relay technology, automatically switches off when boiling point is reached, protected against boiling dry, operating indicator Capacity 0,75 l Voltage 24 V Power 380 W Colour black/aluminium silver Application range specially developed for mobile applications mounting kit for wall or floor mounting Bottle cooler wear-free thermo-electrics with external fan, suitable for all standards to.5 liter bottles, inner container of aluminium for fast cooling/heating, with simple screw connection Colour silver grey Voltage 2/24 V cooling mode up to 22 C below ambient temperature, heating mode up to +60 C beverage temperature

252 252 On-board equipment Booster heating Airtronic D2 Voltage Power Length x width x height 24 V 2200 W 30 x 5 x 22 mm 4 Technical equipment and accessories Thermal paper approved for use by different manufacturers, making its use fl exible and optimising stocking in terms of quantities and costs Packaging unit 3 Application range for digital tachographs (EC control units) Tachograph card for insertion in all standard and automatic tachographs Type Version K 25 with speed range 25 km/h K 40 with speed range 40 km/h K 3300 with engine speed recording to max rpm and vehicle speed range 25 km/h Tachograph card for insertion in all automatic tachographs for electronic evaluation Type Version E 00 speed range 00 km/h E 00 D with engine speed recording to max rpm and vehicle speed range 25 km/h E 25 speed range 25 km/h E 80 speed range 80 km/h E 3300 with engine speed recording to max rpm and vehicle speed range 25 km/h

253 Universal compressed air 253 Plastic pipe for compressed air systems contains plasticiser for extrusion, stabilised against thermal ageing and light Outer 2 mm Bending radius 60 mm Colour black Length 25 m Material Polyamide 2 Standard DIN Wall thickness,5 mm operating pressure at +20 C: 9 bar Technical equipment and accessories Fittings set for an emergency repair compatible with all air brake systems with 8 mm and 2 mm, M6 x,5 and M22 x,5 threads, offers a wide range of fi tting options x ABC connector, regular, M6 x.5 x ABC straight connector New Line, pipe 8 x mm, M6 x,5 x ABC straight connector New Line, pipe 2 x,5 mm, M6 x,5 2 x ABC straight connector threadless, regular, pipe 8 x,0 2 x ABC straight connector threadless, regular, pipe 2 x,5 x ABC connector, straight, regular, length 45 mm x ABC Tee, regular, length 62/26 mm x ABC elbow, 90, regular, length 29 mm x dismantling tool, standard, pipe 8 x,0 x dismantling tool, standard, pipe 2 x,5 x adapter, outside thread M22 x,5, inside thread M6 x,5 Version Comparative no. 3-piece Raufoss Since 205 only the ABC system is installed in new DAF vehicles. At EUROPART you can get the complete RAUFOSS ABC range for your repairs. EUROPART GOOD TO KNOW

254 254 Starter batteries Technical equipment and accessories 4 Starter battery 2 V, filled and charged The wide range of EUROPART starter batteries for trucks and cars stands out particularly not only thanks to its excellent price-performance ratio but also through good start-up power, low water consumption, universal application possibilities, load capacity, long service life and reliability. It goes without saying that the quality requirements of EUROPART starter batteries comply with general DIN/EN standards. Design Heavy Duty Circuit 3 Cell type Bottom rail B00 Type CCA Capacity Length x width x height A [EN] 55 Ah 53 x 223 x 223 mm A [EN] 80 Ah 53 x 223 x 223 mm A [EN] 225 Ah 58 x 276 x 242 mm Starter battery EUROPART Plus, 2 V, filled and charged In addition to the product advantages of the EUROPART standard starter battery, the EUROPART Plus is completely maintenance-free, has a central degassing vent, a safety cover providing flashback protection, Ca/Ca technology (Calcium/Calcium technology) Design Super Heavy Duty Standard EN-4, V3 Circuit 3 Cell type Bottom rail B00 This figure corresponds to Type CCA Capacity Length x width x height A [EN] 80 Ah 53 x 223 x 223 mm A [EN] 225 Ah 58 x 276 x 242 mm

255

256 256 Starter batteries 4 Technical equipment and accessories Starter battery Promotive Silver, 2 V, filled and charged absolutely maintenance-free, labyrinth safety cover with fl ashback protection, central degassing, can be stored for up to 8 months, optimised current fl ow with PowerFrame grid technology for particularly low resistance and maximum conductivity, extended OE technology Design super heavy duty Standard EN-4, V3 Circuit 3 Cell type Bottom rail B00 Application range Commercial vehicles with particularly high energy requirement Type CCA Capacity Length x width x height A [EN] 80 Ah 53 x 223 x 223 mm A [EN] 225 Ah 58 x 276 x 242 mm battery testers, chargers and starting boosters can be found from page 294 onwards Starter battery Promotive blue, 2 V, filled and charged absolutely maintenance-free, labyrinth safety cover with fl ashback protection, central degassing, can be stored for up to 5 months, optimised current fl ow with PowerFrame grid technology for particularly low resistance and maximum conductivity, extended OE technology Type CCA 000 A [EN] Capacity 70 Ah Length x width x height 53 x 223 x 223 mm Circuit 3 Cell type Bottom rail B00 Application range Commercial vehicles with normal energy requirement

257 POWER FOR TRUCKS Innovations for unlimited mobility. It all starts with INTERNAL CIRCULATION VIBRATION RESISTANT HOTEL FUNCTION Acid circulation for a longer cycle life Designed for highest vibration requirements Reliably power all electric devices and equipment onboard ENHANCED TECHNOLOGY DE MADE IN GERMANY POWERFRAME EFB Enhanced Flooded Technology for extra reliability Manufactured to the highest quality standards PowerFrame grid technology

258 258 Bulbs 4 H halogen headlamp bulb Socket P 4,5 s Power 70 W Voltage 24 V Application range for high beam/low beam and fog light Technical equipment and accessories H3 halogen headlamp bulb Socket PK 22 s Power 70 W Voltage 24 V Application range for low beam/high beam/fog light and worklight H4 halogen headlamp bulb Socket P43t-38 Power 75/70 W Voltage 24 V Application range for low beam/high beam/fog light Version Heavy duty H7 halogen headlamp bulb Socket PX 26 d Power 70 W Voltage 24 V Application range for low beam/high beam/fog light Version Heavy Duty

259 Bulbs 259 Headlamp bulb Bulb type R2 Voltage 24 V Power 55/50 W Socket P45t-4 Application range for main headlights 4 Bulb Bulb type P2W Voltage 24 V Power 2 W Socket BA 5 s Application range for indicator, brake, rear fog, reversing lights Technical equipment and accessories Version Heavy Duty Bulb Bulb type P2/5W Voltage 24 V Power 2/5 W Socket BAY 5 d Application range for brake, tail and rear fog light (Illustration similar) Bulb Bulb type PY2W Voltage 24 V Power 2 W Socket BAU 5 s Application range for indicators

260 260 Bulbs 4 Bulb Bulb type R0W Voltage 24 V Power 0 W Socket BA 5 s Application range for tail, licence plate, position and interior lights Technical equipment and accessories Version Heavy Duty Bulb Bulb type R5W Voltage 24 V Power 5 W Socket BA 5 s Application range for tail/licence plate/position and interior light Version Heavy Duty H2 Halogen bulb Bulb type H2W Voltage 24 V Power 2 W Socket BAY 9 s Application range for indicator, stop, rear fog, reversing and interior light Bulb festoon bulb Bulb type C5W Voltage 24 V Socket SV 8,5 mm Application range for tail/licence plate/position and interior light Form Power Length C5W 5 W 35 mm S (0W) 0 W 43 mm

261 Bulbs 26 Bulb Bulb type T4W Voltage 24 V Power 4 W Socket BA 9 s Application range for clearance, interior and number plate lights 4 Version Heavy Duty Bulb display bulb Bulb type T2W Voltage 24 V Power 2 W Socket BA 9 s Application range for clearance light and interior light Technical equipment and accessories Bulb Plastic base lamp Bulb type Bax Voltage 24 V Power,2 W Socket BAX 8,5 d Housing colour grey Application range for instrument lighting Bulb Glass-base bulb Voltage 24 V Application range for instrument lighting, clearance and indicator lights Form Power Socket Length WBT5,2 W W2 x 4,6 d 5 mm 20 mm W3W 3 W W2, x 9,5 d 0 mm 26,8 mm W5W 5 W W2, x 9,5 d 0 mm 26,8 mm

262 262 Lighting 4 Technical equipment and accessories H7 Spotlight Version with position lamp Reference number ECE Ref. 25 Voltage 2/24 V 223 mm Height 235 mm Depth 22 mm without bulbs Lens colour blue clear H spotlight Rallye 3003 Version with LED position light Reference number ECE Ref. 25 Voltage 2/24 V 222 mm Height 242 mm Depth 24,2 mm Type Attachment Colour clear without bulb Comparative no HELLA F H auxiliary driving lamp Luminator-Chromium-Celis Version with LED position light Reference number ECE Ref. 7,5 Voltage 2/24 V 224,5 mm Height 232,5 mm Depth 29,5 mm Colour clear Type surface-mounting without bulb Comparative no HELLA F

263 Lighting 263 LED auxiliary driving lamp with 6 main LEDs (0 W) sturdy aluminium casing, painted black Version with LED position lamp (2 LEDs 0,2 W) Reference number ECE Ref. 7,5 Voltage 0-32 V Lighting power 4500/3200 lm Power consumption 60 W 232 mm Height 239 mm Depth 79 mm Protection class IP67 ECE-R0 approval Technical equipment and accessories LED auxiliary driving lamp Driving light bar, with 40 LEDs Reference number 40 Voltage 0-32 V Lighting power 0800/3934 lm Power consumption 20 W Width 563 mm Height 78,5 mm Depth 86,5 mm Protection class IP67 E approval LED auxiliary driving lamp Driving light bar, with 2 LEDs Reference number 25 Voltage 0-32 V Lighting power 3420/403 lm Power consumption 36 W Width 206 mm Height 78,5 mm Depth 86,5 mm Protection class IP67 E approval

264 264 Lighting 4 Technical equipment and accessories LED reversing light with 4 LEDs and bracket Voltage Lighting power Width Height Depth Connection Type Protection class ECE approval 0-32 V 080 lm 83 mm 75 mm 80 mm with DT connector surface-mounting IP LED working floodlight lens made of impact and scratch resistant plastic Voltage 0-30 V Width 00 mm Height 00 mm Depth 40 mm Type surface mounting Material aluminium casing Protection class IP69K mounting kit incl. 0.5 m connection cable EMC tested Description Version Lighting power Power consumption Fig. with 5 LEDs Close-range illumination, with reverse polarity protection 850/600 lm 9 W with 9 LEDs Long-range illumination with reverse polarity protection 530/20 lm 5 W

265 Lighting 265 LED working floodlight with 5 LEDs lens made of impact and scratch resistant plastic Version Long-range illumination with reverse polarity protection Voltage 0-30 V Lighting power 4500/2290 lm Power consumption 50 W Width 45 mm Height 98 mm Depth 79 mm Type surface mounting Material aluminium casing Protection class IP69K mounting kit incl. 0.5 m connection cable EMC tested Technical equipment and accessories LED working floodlight with 6 LEDs lens made of impact and scratch resistant plastic Version Long-range illumination with reverse polarity protection Voltage 0-30 V Lighting power 40/06 lm Power consumption 8 W Width 60 mm Height 46 mm Depth 58 mm Type surface mounting Material aluminium casing Protection class IP69K mounting kit incl. 0.5 m connection cable EMC tested

266 266 Lighting 4 Technical equipment and accessories LED working floodlight with 9 LEDs lens made of impact and scratch resistant plastic Version Close-range illumination, with reverse polarity protection Voltage 2-55 V Lighting power 685/300 lm Power consumption 3,5 W Width 00 mm Height 00 mm Depth 74 mm Type surface mounting Material plastic casing Protection class IP68 mounting kit incl..5 m connection cable EMC tested LED working floodlight with 6 LEDs lens made of impact and scratch resistant plastic Version Long-range illumination with reverse polarity protection Voltage 0-30 V Lighting power 2720/2200 lm Power consumption 25 W Width 08 mm Height 08 mm Depth 48 mm Type surface mounting Material aluminium casing Protection class IP69K mounting kit incl. m connection cable EMC tested

267 Lighting LED working floodlight lens made of impact and scratch resistant plastic Voltage Depth Type Material Protection class 0-30 V 07 mm 4,5 mm surface mounting aluminium casing IP69K 2 Technical equipment and accessories mounting kit incl. 0.5 m connection cable EMC tested Description Version Lighting power Power consumption Fig. with 6 LEDs Close-range illumination, with reverse polarity protection 020/600 lm 9 W with 9 LEDs Long-range illumination with reverse polarity protection 530/250 lm 5 W LED working floodlight with 2 LEDs support rotatable through 20 Version near-field illumination Voltage 0-33 V Width 09 mm Height 09 mm Depth 90 mm Connection DT connector with 2 m cable Protection class IP68 EMC tested This fi gure corresponds to Lighting power Power consumption 2400/750 lm 7 W /3300 lm 38 W

268 268 Lighting 4 Technical equipment and accessories LED working light rail Version curved, combined illumination Lighting power 6200/702 lm Voltage 0-30 V Power 80 W Width 88 mm Height 78,5 mm Depth,5 mm Connection ATP connector Protection class IP67 ECE R0 approval, EMC tested LED working light rail Voltage 0-30 V Connection DT connector Height 74,5 mm Depth 68,5 mm Protection class IP67 This fi gure corresponds to Description Version Lighting power Power consumption Width with 6 LEDs Spotlight illumination 2700/746 lm 30 W 276 mm with 2 LEDs combined illumination 5400/2986 lm 60 W 56 mm with 8 LEDs combined illumination 800/4508 lm 90 W 756 mm LED working light rail Version far-reaching spotlight illumination Voltage 0-32 V Lighting power 6200 lm Power consumption 80 W Width 88 mm Height 86,5 mm Depth 78 mm Connection ATP connector Protection class IP67 ECE R0 approval/emc tested

269 Lighting LED rotating beacon with three different flashing patterns at choice Voltage Power consumption Colour Protection class ECE R65 approved 2-24 V 20 W yellow IP65 2 Technical equipment and accessories Fastening Height Fig. fi xed surface-mounting 42 mm 83 mm tube bracket 28 mm 235 mm LED rotating beacon low variant Voltage 2-24 V Lens colour yellow Protection class IP65 ECE R65/R0 approved Fastening Height Fig. fi xed surface-mounting 20 mm 40 mm tube bracket 28 mm 20 mm

270 270 Lighting 4 Technical equipment and accessories LED flashing warning light with 6 LEDs with 3 different flashing patterns Voltage 9-32 V Power consumption 8 W Lens colour yellow Width 28 mm Height 28 mm Depth 2 mm Cable length 2500 mm Type surface-mounting Protection class IP65 ECE R65 approved LED flashing warning light with 6 LEDs 9 different light options (also SOS, morse code) switchable, 360 fi eld of view, brightness visible up to 800 metres, with magnet, very sturdy, waterproof, replaceable CR23A battery Light colour light red Housing colour orange Lighting duration up to 00 h 05 mm Height 35 mm Protection class IP65 Application range for protection in the event of accidents, breakdowns and for personal safety LED flashing warning light set 6 rechargeable LED flashing lights, each with 6 LEDs, 9 different light options (also SOS, morse code), switchable, 360 field of view, brightness visible up to 800 metres, with magnet, very sturdy, case with built-in charger 2/24/230 V Light colour light red Housing colour orange Lighting duration up to 00 h 05 mm Height 35 mm Protection class IP65 Application range for protection in the event of accidents, breakdowns and for personal safety CE tested Version 6-piece

271 Warning markers 27 Marking board for trucks and tractors retro-reflective type II, fluorescent Version edged Material aluminium Standard ECE 70 Height 30 mm Width 565 mm Type left right Marking board set for trucks and tractor units refl ective type II, fluorescent Version smooth Material aluminium Standard ECE 70 Height 32 mm Width 565 mm 4 Technical equipment and accessories Number panel with fi xed mounting plate on the reverse suitable for Figures 35 x 93.5 x 0.5 mm Material Sheet steel in accordance with ADR Accessories Description Numeral set, stainless steel, 93,5 x 35 mm, with pocket

272 272 Warning markers Number panel Version fi xed suitable for Figures 7 x 70 x 0.5 mm with bracket and und 8 blank fi gures in accordance with GGVSEB/ADR Technical equipment and accessories Accessories Description Numeral set, sheet steel, 70 x 7 mm, with pouch Warning panel retro-reflecting type Version folding, with edge protection Material Sheet steel Height 300 mm Width 400 mm Colour orange in accordance with GGVSEB/ADR Warning panel Waste retro-reflecting type Version folding, with fastening elements and edge protection, without mounting components Material Sheet steel Height 300 mm Width 400 mm Colour white

273 Warning markers 273 Parking warning sign retro-reflective type II, fluorescent Form A Material sheet steel Height 423 mm Width 423 mm Colour white/red in accordance with 7 StVO (Rules of the Road), 22a StVZO and TA 8b, in accordance with 5c, 72 StVZO (German Rules of the Road), DIN Version rigid, with edge protection rigid, without edge protection Parking warning sign retro-reflective type II, fluorescent Form A Material sheet steel Height 423 mm Width 423 mm Colour white/red in accordance with 7 StVO (Rules of the Road), 22a StVZO and TA 8b, in accordance with 5c, 72 StVZO (German Rules of the Road), DIN 030 Technical equipment and accessories Version Type folding, with edge protection indicating left folding, with edge protection indicating right foldable indicating left foldable indicating right Reflective tape for marking contours refl ective, single-layer prismatic fi lm with adhesive reverse side, fl exibly adaptable, tear-resistant, easy to handle and simple to apply, no edge sealing necessary, easy to cut to size, high resistance to most industrial cleaning processes (including high-pressure cleaning), excellent visibility at large distances, even under poor weather conditions Standard ECE 04 class C Container Roll Length 50 m Width 50 mm Version Material Colour Application range ORALITE VC 04+ Curtain Grade vinyl white Flat bed trucks ORALITE VC 04+ Curtain Grade vinyl yellow Flat bed trucks ORALITE VC 04+ Curtain Grade vinyl red Flat bed trucks ORALITE VC 04+ Rigid Grade polyester white box trucks/fi xed bodies ORALITE VC 04+ Rigid Grade polyester yellow box trucks/fi xed bodies ORALITE VC 04+ Rigid Grade polyester red box trucks/fi xed bodies ORALITE VC 04+ Rigid Grade Polyester red box trucks/fi xed bodies Length 2,5 m, ECE 04, ECE 48

274 274 Emergency equipment 4 Technical equipment and accessories Case for hazardous goods Dimensions Material Colour x 305 x 55 mm polypropylene black Type Fig. 3 PVC gloves, EN 388 EN EN CE eye rinse, sterile with eye wash funnel, 200 ml - protective goggles, tight closing, anti mist overall (protection against chemicals), size XXL PVC boots, size 46 full mask combination fi lter ( ) 4 PVC gloves, EN 388 EN EN CE 020 eye rinse, sterile with eye wash funnel, 200 ml - protective goggles, tight closing, anti mist overall (protection against chemicals), size XXL PVC boots, size 46 full mask combination fi lter ( ) bandage pack with rescue blanket to DIN Fire extinguisher box Version with window Width 30 mm Depth 250 mm This fi gure corresponds to Height Colour 6 mm red mm black mm red

275 Emergency equipment 275 Continuous pressure powder fire extinguisher Fire class A, B and C, testable and refillable made of high quality sheet steel, CE compliant Type PD 6 GA Contents 6 kg Standard DIN EN 3 Spraying duration 8 sec Spraying width 6 m Temperature range -30 to +60 C Width x height x depth 500 x 270 x 60 mm Power rating 34 A, 83 B and C Application range suitable for liquefied gas stores, garages and hobby rooms high-quality wall bracket Important: Please follow the country-specific regulations! GS tested Technical equipment and accessories Rechargeable powder fire extinguisher Fire class A, B and C, testable and refillable ergonomically shaped, robust carrying handle, valve body made of glass fibre reinforced special plastic, hose line with woven fabric intermediate layer made of synthetic rubber, with pivoting pistol which can be switched off, semi-automatic, with internal cartridge, very service-friendly Type P6STAR Contents 6 kg Standard DIN EN 3 Thread M74 x 2 Temperature range -30 to +60 C power rating 34 A, 83 B and C Application range ideal for hazardous goods transport GS tested Vehicle bracket for fire extinguisher up to 6 kg 2 retaining bands

276 276 Special tools 4 Technical equipment and accessories Brake caliper key Drive /2" Drive form hexagon Spanner size 26 mm Overall length 40 mm Depth 6 mm 38 mm Material Chrome-molybdenum steel hexagon, inner square according to DIN 320/ISO 74, with ball stop groove, short Application range for releasing and tightening the brake caliper mounting bolts on DAF vehicles x /2" hexagon power socket, short, 26 mm x /2" CHROMEplus jointed push-in handle, 800 mm Version 2-piece Self-locking nut socket for the professional release and tightening of square clamping nuts on steering knuckles, milled-out profi le, suitable for machinery operations Drive 3/4" Drive form square Spanner size 56 mm Version short Height 76 mm Material special steel Surface phosphated Application range DAF, Mercedes-Benz, MAN, Kässbohrer and Setra vehicles Power bit socket TX inner square to DIN 32/ISO 74, for machinery operations Drive /2" Drive form TORX Spanner size T70 Version long Surface phosphated 25 mm Material Chrome-molybdenum steel

277 Special tools 277 Impact socket as far as is possible avoids slipping off, milled-out profi le, sturdy design, choice of drive between impact nut runner or torque wrench Drive " Drive form square Version short Overall length 7 mm Depth 40 mm Material Chrome-molybdenum steel Surface phosphated Spanner size Fig. 05 mm mm mm Technical equipment and accessories Self-locking nut socket for the professional release and tightening of square clamping nuts on steering knuckles, milled-out profi le, suitable for machinery operations Drive 3/4" Drive form square Spanner size 60 mm Version short Height 76 mm Material special steel Surface phosphated Application range DAF, Mercedes-Benz, MAN, Kässbohrer and Setra vehicles Motor turning gear suitable for DAF for turning an engine by hand when mounted in an engine stand, allows pinpoint accurate alignment Drive form hexagon Spanner size 24 mm Width 40 mm Height 90 mm Overall length 90 mm Material special steel Number of teeth Application range ideally suited for adjustment work on the engine timing suitable for XF95, 95XF, CF85, CF75, 85CF, 75CF, 65CF, 95, 85, 75,

278 278 Special tools 4 Technical equipment and accessories Motor turning gear suitable for DAF for turning an engine by hand when mounted in an engine stand, allows pinpoint accurate alignment Drive form square Acceptance /2" Number of teeth 9 Application range ideally suited for adjustment work on the engine timing suitable for XF Piston ring cable tie with spanner wrench with full fine adjustment Length 80 mm Clamping range mm Material Special spring band steel Piston ring pliers for secure attachment of piston rings Version Length Clamping range Surface blue handles 240 mm 0-60 mm bright nickel plated Piston ring pliers for secure spreading of piston rings Version Length Clamping range Surface with prism mounting, hardened 220 mm mm chrome plated, tips burnished

279 Special tools 279 Brake spring pliers for drum brakes with special binding and supporting crown, especially suitable for glued brake pads, heavy-duty model with exchangeable spring hooks and hand pinch protection Length 500 mm Material Chrome vanadium steel Surface chrome-plated Hose clip pliers rotatable grip inserts for safe manipulation of clamps in any position, good leverage: clamps can be safely and easily opened and closed again without applying any great force, hoses gently released using the serrated gripping jaw, narrow head, minimal head width Version forged, oil hardened Length 250 mm Material Chrome vanadium electric steel Application range for opening and closing Click clamps, for convenient working, for instance on fuel lines, vacuum lines and intakes Technical equipment and accessories Unlocking tool Overall length 60 mm Jaw size 0-30 mm Material special steel Application range for releasing fuel line push-fit connectors Flaring tool kit light and easy to handle, with hydraulic pressure spindle, allows use directly on the vehicle, no damage to coated lines, fast and precise working results through straight line fl aring movement, no breaking open of the line during the flaring process Application range for universal use in vehicle workshops, ideally suited for use on brake or hydraulic lines, for thin-walled steel, aluminium and copper lines, for the production of convex and double fl ares with cutter, bender and pipe deburrer, in sturdy plastic case Version 6-piece

280 280 Special tools Oil filter spider secure grip due to curved contact faces mm Application range inner square according to DIN 320/ISO 74 4 Technical equipment and accessories Unlocking tool for opening and closing fuel line couplings, during fuel filter changes or during engine repair Overall length Jaw size 230 mm 0-05 mm Refractometer adjustable eyepiece with rubber eye cushion, with automatic temperature compensation (ATC), can also be used in ambient temperatures below 0 C, measurement correction function using bimetallic strip, high-quality design, good readability due to sharp dividing lines, recalibration possible Overall length 60 mm Material aluminium Application range for rapid and precise testing of the acid content of the battery fluid, of the frost protection content and AdBlue additives, can also be used for coolant and windscreen washer fluids with calibration screwdriver and pipette, in practical plastic case

281 Special tools 28 4 Cable connector unlocking kit for opening CLIC spring lock line couplings Application range air-conditioning systems, fuel and air lines as well as hydraulic lines releasing clip, plastic, white /4, 5/6, 3/8, /2, 5/8, 3/4, 7/8 releasing clip, open, 5/6 cylinder releaser with spring, red 3/8, blue /2, black 5/8, white 3/4 double scissor releaser, 5/6 x 3/8 scissor releaser, aluminium, gold 5/6, blue 3/8, yellow /2, green 5/8, black 3/4, red 7/8 lever releaser, open, steel, 5/6 fork cone releaser, metal, black replacement rubber ring set for scissor releaser, 6-piece in a sturdy plastic case Technical equipment and accessories Version 22-piece Centring sleeves set for quick removal and replacement of utility vehicle wheels, for locating the brake drum, no slipping during removal and replacement, protects the wheel stud threads, exact centering of the rim to the wheel studs of rim hole 26 mm Overall length 45 mm Threaded bolt M22 x,5 Material Special steel Application range DAF, Ford, MAN, Mercedes-Benz, Renault, Scania and Volvo vehicles Version 2-piece Oil filter spanner Drive 3/8" Spanner size 32 mm Application range for removal and installation of the oil fi lter cover when replacing the oil fi lter insert

282 282 Workshop equipment Technical equipment and accessories 4 Diagnosis unit Axone 4 truck, Agri and Navigator TXTs very good diagnostic coverage, IDC4e premium with special functions, expandable via TEXA app store, dual mode, display of oscilloscope/multimeter and own diagnosis, simplified vehicle identifi cation via VIN or engine code, automatic fault memory query into all common systems, read and delete fault memory entries as well as display of fault code descriptions, query technical notifi cations and data, electrical wiring diagrams with component layout, optional access to the TEXA database "SOLVED PROBLEMS" via Google search function, query status messages and parameters, implement settings and coding, watertight and shockproof casing, integrated camera for documenting the repair, high capacity battery with up to 8 hours operating time, Bluetooth communication with the diagnostic interface, Wi-Fi interface, expansion through measurement technology module (oscilloscope and signal generator), automatic update function, PASS-THRU capable diagnostic interface, recording the diagnostic data during test runs Dimensions 60 x 70 x 55 mm Navigator TXTs with OBD plug TEXPACK TRUCK, update contract for 2 months TEXINFO Call Center, diagnostic help via telephone for 2 months TEXINFO technical notices, access for 2 months TEXINFO Google search function, access for 2 months power supply charging cable mini docking station operating instructions Oscilloscope Scope 200 digital 2-channel scope module, display of the measurements on PC or Tablet, active probe supply with colour guide, voltage measurement to 600 V AC/DC, current measurement ma to 800 A AC/DC, resistance measurement from 0, Ω to 5M Ω, 2 differential oscilloscope measurement channels each with 40 MS/s, galvanically separated inputs Version 2-channel oscilloscope Scope module 200 current clamp 00 ma to 800 A 2 x cable set (measuring cables, test probes, test clamps (black/red) in equipment case

283 Workshop equipment 283 Technical equipment and accessories 4 Diesel emissions tester AVL DiTEST MDS 305 convenient and fast solution for exhaust testing in the workshop space-saving, tidy storage of the exhaust station without a workshop trolley faster exhaust testing procedure with intuitive guidance through the application easy vehicle search from the databases an exhaust test can be performed by one person on all commercial vehicles novel radio concept enables the maximum freedom of movement during measurement wear-free, wireless connection to PC short warm-up times < 2 Min. small, easy to handle OBD module fl exible, sturdy and efficient to use in the day-to-day business innovative workshop-orientated solution for fi tting to the vehicle to be measured Application range for trucks, buses and cars AVL DiSmoke 480 Bluetooth diesel exhaust module AVL DiTEST OBD 000 OBD interface AVL DiTEST AUX 2000 Bluetooth engine speed/temperature recording wall bracket suitable for the workshop including guideline Accessories Description Service contract for exhaust gas tester, AVL DiTEST Basic-Support Diesel

284 284 Workshop equipment Technical equipment and accessories 4 Air-conditioning service unit Konfort 760 R 2 GAS READY bright TFT colour display, advanced graphics interface, control of the database and saving of the services performed on SD card, fi lling accuracy +/- 5 g, high recycling rate (over 95 %), two stage vacuum pump, oil container hermetically sealed against contamination, high precision automatic oil injection, automatic detection of the oil container, automatic refrigerant measurement accuracy control, locking scales, fully automatic A/C service, automatic compensation for the length of the service hoses, automatic maintenance messages, simplifi ed maintenance, automatic condensate discharge, separate POE oil container available Operating modes: database, manual operation, my database, multilingual software implementation Tank contents 20 kg Application range for trucks, small buses, cars and for use on hybrid vehicles PAG oil container, UV container, used oil container, cover hood, mains connection cable, operating instructions with truck, passenger car and agricultural database on SD card and manual Version prepared for R 34a refrigerant Prepared for refrigerant R 234yf Air-conditioning service unit mobile, for R34a fully automatic, sturdy, powder coated aluminium casing, fi lling of oil via time control, includes database Dimensions 60 x 42 x 60 mm Weight 38 kg Suction power /4 PS, 5 kg/h Filling power 90 kg/h High-pressure vacuum pump 70 l/min. Recycling tank 2 l, 0 kg, TÜV-tested Electronic scales with 50 kg weighing capacity Filter capacity 60 ml water Compressor performance /4 PS V-motor Working temperature 5-45 C Application range for trucks, agricultural and construction machines with printer, 0 kg recycling tank and truck database Illustration also shows optional accessories

285 Workshop equipment Roller-type brake test stand Varioflex 306 U Easy fully plastic aluminium oxide coated test rollers, splash-resistant spur gear motors, low-maintenance DMS measurement system, drive out assistance, single wheel switching via cable remote control, automatic safety switch including 20 m control cable, optional manual control and automatic mode Control cabinet: special locks and silicon seal, 2 large analogue displays, automatically switchable measurement range, lockable main switch, entry control lamp for active safety, visual brake control via traffi c lights, differential limit value lamp - Preparation for reverse direction - Equipment for digital difference indicator - Equipment for connection of wheel and axle load scales - Equipment for pressure transmitter SP test - Equipment for PC interface Axle load 6 t Testing width mm Test speed 2,3 km/h Roll 200 mm Measurement and display range 0-6/0-30 kn Connection 400 V/63 A, inactive display cabinet (H x W x D) 600 x 760 x 20 mm roller coefficient dry/wet > 0,7/0,6 slip shutdown at actual slip: 27 ± 3 % Application range for trucks and passenger cars (optional) including weighing preparation suitable for ASA Livestream interface software Technical equipment and accessories Version two-part roller set, over the pit one-part roller set, in front of the pit

286 286 Workshop equipment Technical equipment and accessories 4 Laser axle measuring system TL0 easy to use, magnetic attachment of the measuring heads on steel rims, special brace for aluminium rims, installation of the measuring heads between the wheel bolts, no lifting of the vehicle, possible to apply on axles without rims (production), with accessories that are also suitable for measurement on cars, fast payback through time saved, high quality turn plates (no open ball bearings) Application range for trucks, buses, semi-trailers, trailers, vans, cars 2 x measuring heads each with pivoting battery diode laser x set magnetic spacers, short x set magnetic spacers, long x clamping device for aluminium rims 2 x specially mounted rotating/sliding plates with brake x track scale 2 x magnetic scales x electronic inclination gauge with quick clamping device x battery charger x measurement log file x sturdy, mobile storage cabinet with service stand

287 Workshop equipment 287 Technical equipment and accessories 4 Beamsetter Economy Universal application, precise, fast and easy to use, all headlights including xenon at an installed height of between 250 and 200 mm (including trucks, tractors etc.) can be monitored for correct setting and perfect function. the functional design makes effortless vertical positioning of the beamsetter box in front of the headlight possible - even one-handed, the device is easily aligned to the longitudinal axis of the vehicle thanks to the broadband sight, can be slid sideways, the three-wheel base provides a safe stance for optimum setting, different cut-off lines can be set (depending on the vehicle type) using the scaled disc on the back of the beamsetter box, has a photo-electric light meter, the measured light values can now be comfortably read off from a modern digital display design certificated Beamsetter SEG-IV DLLX digital lux meter, broadband visor, Fresnel lens, laser positioning aid, spirit level/eccentric shaft for levelling, rotatable column for the optical case alignment, suitable for rails, compatible with CSC tool, can be calibrated using manufacturer's alignment unit roller base of polymer concrete

288 288 Workshop equipment The pit workplace Inspection pits are a worthwhile investment for truck workshops, and not just because of their long service life and low maintenance costs. Ease of use and above all the universal application (suitable for all vehicle types) are further plus points. There are many questions to be answered before the pit is constructed however. Above all, when determining the length and type, the number of vehicles to be accepted plays the most important role. Of equal interest are the choice of adapters and the typical number of axles. 4 Technical equipment and accessories In order to be able to perform maintenance and repair work with high-quality technology, vehicles must be lifted over the pit. In many cases, hazardous improvisation often starts with an attempt to chock up the vehicle. Valuable working time is lost and unsuitable supports have a negative effect on working safety. Suitable support components as additions to the pit lift are the remedy: Here the pit lift and support components are adjusted to the pit and the form of the vehicle. Once the vehicle is lifted and supported, the lift is available for further work or is removed from the working area and the mechanic has freedom of movement in the pit. Furthermore, a drive-over segmented pit cover can ensure more freedom of movement in the workshop. When closed, the surface can be used in other ways. The length of the pit can be freely chosen, depending on the form of the vehicles as well as the size of the hall and the drive-on and drive-off facilities. The patented BLITZ pit cover in a segmented design belongs to these things. It emphatically stands classical pit work on its head, because from now on only the area that is actually needed is open. Individual pull-out elements mounted on rollers make this possible. In this way, several jobs can be carried out on one vehicle - if you wish - but indeed also jobs on several vehicles.

289 Workshop equipment 289 Truckbay test and maintenance pit for trucks Truckbay is a complete factory-prefabricated workshop pit for trucks weighing up to 60 tonnes and allows modern and ergonomic working with a headroom of up to.60 m. The Truckbay is of welded construction and is watertight and oiltight. As a specialised company certified according to 9 I WHG (Water Management Act), Blitz can meet all the occupational and environmental safety requirements for the Truckbay. Technical equipment and accessories 4 The pit cover Truckbay Cover increases the safety factor in your workshop and pays dividends - easy to use electrical drive operated by a press of the button - with many advantages: full use of the workshop or hall surfaces with the pit closed integration into the manoeuvring surface because the pit can be driven over in conformance with the heavy duty class easy and safe operation through dead man's circuit and contact strip Truckbay 030 SLW Length Opening width Working width Headroom with roller cover 30 to 32 m 0,96 m,5 m,4-,6 m without roller cover 30 to 32 m 0,96 m,5 m,4-,6 m Truckbay 060 SLW Length Opening width Working width Headroom with roller cover 60 to 32 m 0,96 m,5 m,4-,6 m without roller cover 60 to 32 m 0,96 m,5 m,4-,6 m EUROPART GOOD TO KNOW

290 290 Workshop equipment 4 Technical equipment and accessories Workshop-pit lifters hydropneumatic rapid and precise air hydraulics with fast up and down travel, with operating panel at the ergonomically correct working height, maintenance unit as standard, laterally moveable lift cylinder with spring-mounted ball bearings Piston stroke 800 mm Height, max. 820 mm Height, min. 020 mm Cylinder- 60 mm Optional variants: Adjustment range = mm (short delivery time) Adjustment range 2 = mm (on request) Adjustment range 3 = mm (on request) with suspension Many modern vehicles must today be raised at 2 points. Check the use of axle traverses! When ordering, please complete the dimensions sheet! Model Load capacity GD 00-0 t GD 50-5 t GD t Mobile Column Lifts HydroLift S2 fully hydraulic, with double load security, battery driven, wireless communication with the individual lifting units based on IEEE , the "Up" "Down" and "Emergency/Off" can be selected from each lifting column, built-in synchronisation control, easy to operate using pictograms, with FS profile to protect the wheel hub, HYDRO Protect System to protect the raising cylinder and a VARIO fork to accept different tyre sizes without the need for additional wheel adapters, can be enlarged from 4 to up to 8 pillars Version with 3 kw elect. motor Lift time 78 sec Lowering time 54 sec with removable forklift adapters Load capacity Weight Width Height Lifting height 4 x 6,2 t 600 per column kg 092 mm 2260 mm 759 mm x 8,2 t 720 per column kg 56 mm 2590 mm 753 mm x 6,2 t 600 per column kg 092 mm 2260 mm 759 mm x 8,2 t 720 per column kg 56 mm 2590 mm 753 mm

291 Lifting technology in perfection BlitzRotary is one of the leading manufacturers in the technical areas of lifting, compressed air, tyre inflation and measurement. The most modern processing and manufacturing facilities, among which are welding robots, laser and fully automatic processing centres, form the basis for the particularly high vertical range of manufacture at Blitz. Highly qualified employees in development, assembly and toolmaking underpin the requirement to achieve a constantly high quality standard. EUROPART Europe's No. for truck, trailer, van and bus spare parts.

292 292 Workshop equipment Technical equipment and accessories Trolley Jack hydraulic sturdy frame structure with reinforcements for heavy-duty tasks, safe and precise control during lifting and lowering, the double movement of pull-and-turn during lowering provides extra safety against unintentional lowering, directly controlled trigger, compact design, ergonomically shaped handle Model Load capacity Lifting height Version Weight Fig. EP 3HLQ,3 t mm long stroke, quick-lift foot pedal 39 kg EP 20 2 t mm 3 kg EP 20Q 2 t mm quick lift foot pedal 3 kg EP 20HLQ 2 t mm long stroke, quick-lift foot pedal 49 kg EP 40Q 4 t mm quick lift foot pedal 95 kg EP 50HLQ 5 t mm long stroke, quick-lift foot pedal 70 kg EP 60Q 6 t mm quick lift foot pedal 96 kg EP 00Q 0 t mm quick lift foot pedal 8 kg Accessories Description suitable for Fig. Retrofi t set Pneumatic wheels Trolley Jack EP 40Q, EP50HLQ, EP 60Q, EP 00Q Extension 00 mm mobile jack EP 20, EP 20Q, EP 3HLQ, EP 20HLQ Extension 25 mm mobile jack EP 40Q, EP 60Q, EP 00Q, EP 20Q, EP 50HLQ Axle traverse Load capacity t mobile jack EP 20, EP 20Q, EP 3HLQ, EP 20HLQ Rubber coating Trolley Jack EP 20, EP 20Q, EP 3HLQ, EP 20HLQ

293 Workshop equipment Technical equipment and accessories 4 5 Jack air-hydraulic EUROPART own-brand car-jacks are manufactured from special materials which guarantee their functions, quality and breaking strength, even in the most extreme situations. Pressure range 8-0 bar Model Load capacity Lifting height Weight Fig. EP 24 mobil 20/0 t mm 5 kg * EP 25 N 40/20 t mm 39 kg EP 222 N 60/30 t mm 7 kg EP 32 60/30/5 t mm 50 kg EP 330 N 80/50/25 t mm 03 kg * portable 2 Accessories Description Fig. Saddle Load capacity 80 t V fi fth wheel Load capacity 80 t

294 294 Workshop equipment 4 Technical equipment and accessories Digital multimeter professional hand-held meter with automatic measurement range setting, capacitance test, diode checking with acoustic signal, measurement of transistors, acoustic continuity test, frequency measurement, data hold (storage of the last values measured), bar graph display Width x height x depth 95 x 95 x 45 mm DC voltage measurement: 326 mv V DC current measurement: 326 ma - 0 A AC voltage measurement: 3,26 V V AC current measurement: 326 ma - 0 A Resistance measurement: 326 Ω - 32,6 MΩ - protective cover with integrated measuring probe holders (both power sockets are protected) - 2-fold adjustable mount - wall bracket mm test cables with test probes, both sides covered - 9 V PP3 battery Battery tester with integrated thermal printer the optional use of a clip-on ammeter is supported by the tester and also improves the test results, voltage measurement and temperature measurement functions, integrated thermal printer presents all measurements clearly in text and graphically in the chosen menu language, customer-specifi c data can be entered separately, USB port for downloading test results to a PC and for future updates, 6 menu languages Standard JIS, EN, DIN, SAE, IEC CCA CC A Operating temperature 0-40 C Width x height x depth 30 x 65 x 265 mm Application range EFB (Enhanced Flooded Battery), AGM (Absorbent Glass Mat), 6/2 V starter batteries (lead/acid, gel and fl eece batteries/agm), starting/charging system tests for 2/24 V equipment Accessories Description Printer paper roll, 5 rolls

295 Workshop equipment 295 Battery charger MXT 4 CTEK charger, electronic, SUPPLY special mode in which the device can be used as a power supply unit if the battery is removed (radio code), Regeneration mode special mode in which exhaustively discharged batteries can be regenerated and returned to full capacity, with 8-stage, fully-automatic IIUoUp charging characteristics without voltage peaks. MAN approval issued. Voltage V AC Charge voltage 27.2 V, 28.8 V, 3.6 V, nominal 24 V Charge current, max. 4 A Protection class IP44 Cable length,85 m Length x width x height 235 x 30 x 65 mm Weight,4 kg Battery capacity: Ah (charge), Ah (maintain) Battery types: open, maintenance-free AGM, gel and lead-calcium Reverse current: < ma Charging time for a 60 Ah battery: 4 hrs at 4 A Technical equipment and accessories Start booster maximum starting power through extremely deep-cycle resistant AGM battery (replaceable), lifetime for max. 50% start discharge: 000 cycles, correct use protects the electronic equipment of the vehicle, built-in voltmeter which indicates the state of charge of the batteries and the correct operation of the charging equipment as well as the generator, built-in socket, high-quality internally bridged crocodile clips with a very wide opening angle, impact-resistant polyethylene casing, charging via electronic battery charger with pulse charge retention or with cable (not included in the delivery) via the generator through the vehicle's cigarette lighter socket Model Version Rechargeable battery AS 2-24/600 AS 2-24/2000 AS 2-24/2400 This fi gure corresponds to Starting current: 2 V at 600 A, 24 V at 800 A Peak current: 2 V at 4740 A, 24 V at 2370 A Starting current: 2 V at 2000 A, 24 V at 000 A Peak current: 2 V at 5920 A, 24 V at 2960 A Starting current: 2 V at 2400 A, 24 V at 200 A Peak current: 2 V at 6200 A, 24 V at 300 A Cable cross-section Cable length Application range 2 x 20 Ah=40 Ah 35 mm²,35 m vehicles up to 250 PS at 24 V 2 x 20 Ah=40 Ah 35 mm²,35 m vehicles up to 350 PS at 24 V 2 x 26 Ah=52 Ah 50 mm²,35 m vehicles up to 500 PS at 24 V Accessories Description Carriage for portable starting booster, easily demountable, with full-rubber wheels

296 296 Workshop equipment Technical equipment and accessories 4 Start booster ASF 2-24/3200 professional external starting unit, maximum starting power through extremely deep-cycle resistant AGM battery (replaceable), voltage peak free starting, lifetime for max. 50% start discharge: 000 cycles, manual voltage selection, correct use protects the electronic components of the vehicle, integrated voltmeter which displays the charging status of the batteries and the correct functioning of the charging equipment and alternator, built-in socket, high-quality, internally bridged crocodile clips with a very wide opening angle, impact-resistant one-piece housing with lifetime guarantee, charging through electronic battery charger with pulse charging preservation or using the cable provided through the alternator at the vehicle's cigarette lighter. Voltage 2/24 V Cable cross-section 70 mm² Cable length,95 m Weight 38 kg Starting current: 2 V at 3200 A, 24 V at 600 A Peak current: 2 V at 7750 A, 24 V at 3875 A IUU charger The supplied IUU charger allows permanent connection to the mains so that the full performance is always immediately available

297 Workshop equipment 297 Brake maintenance unit universal, pneumatic simple to use, low own weight so easy to move, fi lling and bleeding hydraulic equipment, leak test in low pressure range, air and brake fl uid are hermetically separate Contents 5 l Working pressure 0-3,5 bar Application range suitable for all ABS equipment and hydraulic clutches Standard adapter no. 20 for European vehicles Filling and bleeding station VARIO 5 MO, mineral oil version self-venting after changing container, suitable for hydraulic couplings (tractors/haulers), leak testing in low pressure range Version steplessly adjustable working pressure Contents 5 l Working pressure 0-3 bar Dimensions 460 x 300 x 320 mm Weight 0 kg incl. clutch connection no. 67 MO without fl uid container 4 Technical equipment and accessories Axle leg bolt press set FP 73 for pressing bolts in and out without removing the front axle, saves a great deal of time, easy to handle, works in any position, high pressing force, can also be used as a stationary and mobile workshop press Pressure 73 t Stroke 5 mm Clearance 250 mm Piston 65 mm Traverse bore 70 mm press body, 2 stay bolts, transverse bridge complete, reducer for bridge bore (diameter 70/55 mm), separate hand pump with.8 m hydraulic hose, pressure bolt set (8-piece, diameter mm), bridge and piston locking piece, lifting and moving cart (pivoted)

298 298 Workshop equipment 4 Technical equipment and accessories Tyre mounting machine ATH 7226 clamping device with 4 clamping arms, hydraulic lifting arm and lateral fi tting carriage, the fi tting arm can be manually moved on the carriage and can also be turned and folded out, electric drive for the rotational movement of the clamping arms, one fi tting speed Version electrohydraulic Wheel, max. 500 mm Clamping range 4-26" Voltage 400 V Drive,5 kw Weight 700 kg Operating pressure bar 3 phase ~ 400 V/50 Hz Application range Light truck and truck tyres with a maximum rim diameter of 26" x bead clamp for steel rims, x mounting lever, x grease gun, x grease cartridge Wheel balancing machine GT2-EU service-friendly, mobile, motorless wheel balancing machine, fl exible - mobile use and in workshop, fitted with all necessary standard functions, various routines for aluminium rims preprogrammed, integral lift (manual), static and dynamic balancing, balancing time of 24 sec Rim width 4-3" Rim dia. 3-24" Wheel, max. 200 mm Wheel weight, max. 200 kg Balancing accuracy +/- g Shaft dia. 40 mm Weight 62 kg Application range Truck and car wheels Quick-release nut, measuring gauge, balance weight pliers, 5-cone set (44/74, 72/3, 22/74, 70/235, 275/284 mm)

299 Workshop equipment 299 Technical equipment and accessories 4 Detergent sprayer FoamMaster FM50 Viton sealing material, sturdy plastic container, plastic spray lance with fl at spray nozzle, foam cartridge set (variable foaming level), spiral hose (2,5 m long), powerful pressure pump, pressure reducer with pressure gauge on quick-shut valve, safety valve, foot ring for safe standing, transparent container, can be carried on the shoulder, with built-in compressor connection for external compressor using tyre valve, CE mark Filling capacity 5 l Total volume 2,2 l Operating pressure max. 3 bar Application range suitable for applying media with a ph value between 5 and LED work lamp PL-08, with 8+ SMD LEDs spot lighting SMD LED ( W), can be pivoted through 20, 2 x 90 rotatable, magnetic base, micro USB charging socket Power 3 W Lighting power ca. 300 lm Lighting duration approx. 2.5 h Charging time 3 h Rechargeable battery Li-ion (3,6 V/2000 mah) Length 330 mm USB charger cable with mains plug

300 300 Workshop equipment 4 Technical equipment and accessories LED work lamp with 8+5 LEDs spot lighting 5 LEDs, 20 swivelling, magnetic base, removable retaining bracket Lighting duration approx.,5 h Charging time 3 h Rechargeable battery Li-ion (3,6 V/2000 mah) Length 220 mm Temperature range <50 C Version not water-resistant USB charger plug with mains plug Colour orange black LED work lamp PRO TL bright and powerful working light due to the 30 W SMD LED light source, the LED board made of aluminium as well as suffi cient space on the inside prevent the lamp from overheating, quality components ensure a long service life, socket on the rear Voltage 230 V Power 30 W Lighting power 3300 lm Cable length 5 m Protection class IP Accessories Description Tripod, Tripod, black, 600 mm

301 Workshop equipment LED work lamp powerful COB lamp with the latest LED technology, for professional use, strong casing of cast aluminium, slim and elegant design, unbreakable and shockproof, 5-level dimmer function, with integrated carrying handle, low current consumption, minimal warming, long service life of the light source, swivelling, support base can be pivoted, approved for use outdoors Voltage Cable length Protection class 230 AC V 5 m IP67 Model Lighting power Power Fig. NOVA 3K lm 26 W NOVA 3K C+R lm 26 W NOVA 5K lm 42 W NOVA 5K C+R lm 42 W NOVA 0K lm 84 W Technical equipment and accessories with battery Accessories Description Tripod, Height,35-3 m Tripod, mobile, 0,7-,8 m Double bracket for the positioning of two lamps on a stand LED head lamp Sensor with unique contact-free on/off sensor switch - easily switched on and off by hand movement. Focussing lens for wide angle to telescopic, 2 lighting powers: 00% or battery-saving mode 50%, comfortable fit with soft protective cushion, ergonomic, adjustable three-point head band (30 mm) for a perfect fit, flexible lighting position with a W Cree XP-E LED Protection class IP54 3 AAA,5-V batteries

302 302 Occupational health and safety Work jacket FULDA hardwearing, triple flat felled seams extend the service life of the product, generous freedom of movement through cut-to-shape sleeves, slightly longer back, rounded hem offers perfect freedom of movement and easy access to the front pockets, improved visibility with the aid of refl ective effects 4 evaluated by ETSA, certified according to UV Standard 80 Technical equipment and accessories Size anthracite/black red/black cornflower blue/black blue S M L XL XXL XXXL Dungarees AUGSBURG hardwearing, triple flat felled seams on the legs and in the crotch extend the service life of the product, superb fi t with ergonomically shaped legs and wedge shaped inserts on the inside leg and in the crotch (with extra reinforcement), with CORDURA fabric reinforced knee pockets, access to knee protection from above and fl ap so that no dirt collects, height-adjustable knee pockets, optimum knee protection, improved visibility in the surroundings with the help of refl ective effects evaluated by ETSA, certified according to UV Standard 80 Size anthracite/black red/black cornflower blue/black blue C C C C C C C C C C

303 Occupational health and safety 303 Work trousers MANNHEIM Triple fl at-fell seams on the legs and in the crotch, low form and tailored waist band, trouser legs are ergonomically shaped, slanted thigh pocket can be individually divided using press studs, knee pockets made of CORDURA fabric, adjustable height and with fl ap as well as access from above, refl ective effect, protection according to the EN 4404 standard is achieved when appropriate knee protection inserts are used evaluated by ETSA, certified according to UV Standard 80, Size dark anthracite/black red/black cornflower blue/black blue C C C C C C C C C C Technical equipment and accessories Knee cushion RedPad the portable and ultra-light knee cushion, makes kneeling more comfortable and convenient everywhere Outer dimension 46 x 23 x 3 cm Knee pads Basic Black protective area with pliable PVC cap, adaptable via fl exible lamellae with soft padding and elastic gel material insert, wide neoprene edging protects against penetration and slipping in the hollow of the knee, with hook and loop closure for all sizes

304 304 Occupational health and safety 4 Emergency warning Softshell jacket all-round reflective strips (waist, sleeves, shoulders), two side pockets with zip fastener, breast pocket with zip fastener, inner pocket with Velcro fastener, Velcro fastener on the cuffs, longer back Material 00% polyester Standard EN ISO 2047:203 Technical equipment and accessories Size yellow/marine orange/marine 46/48 (S) /52 (M) /56 (L) /60 (XL) /64 (XXL) /68 (3XL) Emergency warning waistcoat with 2 body and 2 shoulder refl ective strips Version with hook and loop fastener Material 00% polyester Standard EN 2047 Size one size fits all Colour yellow orange

305 Occupational health and safety 305 Fine dust mask protects up to 4 times the AGW value, single use Version without exhalation valve Colour white Standard EN 49, protection level FFP Application range restoration work, lagging work, cleaning work in industry and at home, sanitary work Fine dust mask protects up to 0 times the AGW value, single use, high wearing comfort due to exhalation valve providing lower breathing resistance Version with exhalation valve Colour white Standard EN 49 protection level FFP2/V Application range restoration work, lagging work, cleaning work in industry and at home, sanitary work Technical equipment and accessories Fine dust mask protects up to 30 times the AGW value, single use, high wearing comfort due to exhalation valve providing lower breathing resistance Version with exhalation valve and nose clamp Colour white Standard EN 49 protection level FFP3/V Application range restoration work, lagging work, cleaning work in industry and at home, sanitary work exhalation valve, nose clamp, sealing lip, adjustable strapping

306 306 Occupational health and safety 4 Protective goggles EN 66 provides complete all-round protection, the length of the ear pieces can be adjusted, making fitting easier, the lenses are non-fogging, scratchproof, anti-static and particularly easy to look after Version blue frame, clear lens absorb 99.9 % of UV rays up to 400 nm Technical equipment and accessories Full view protective goggles wide viewing window for an unlimited field of vision, hoop with SoftPad technology, adjustable in length and angle, highly developed indirect ventilation system, PLUS anti-scratch and PLUS anti-mist coating, soft fitting rubber edge for sealing protection, certificated according to EN66 point 3 (droplets and splashes) and point 4 (coarse dust particles), Version Colour Material clear lens grey/green polycarbonate lens Full view protective goggles panoramic lens, can be worn over prescription glasses, exclusive UDC coating, compatible with half-masks, indirect ventilation system guarantees certified protection against droplets and splashes, PSA category III, mechanical strength 432 km/h, also at extreme temperatures Version Colour Material clear lens grey/green polycarbonate lens Accessories Description Visor for face protection Replacement washer Full view protective goggles High-tech full view glasses with wide field of vision, anatomical nose bridge for perfect fit to the face, the adjustable elastic strap and a soft edge enable an optimum fit to the face, corrective insert available, PSA category III Type 60 Version Colour Material indirect ventilation blue PC indirect ventilation blue Acetate unventilated clear PC unventilated clear Acetate Accessories Description Replacement washer, PC Replacement washer, Acetate

307 Occupational health and safety 307 Ear plugs on strap M4 Headband with air cushion ridges, reduces pressure and heat build-up, light and fl exible with low contact pressure Standard EN352- Material ABS, polyurethane (PUR), TPE fi lm, POM, stainless steel, EVA Colour yellow Sound insulation value (SNR) = 30 db(a) Application range For changing noise levels or problems using earplugs Technical equipment and accessories Ear plugs on strap WaveBand 2K great freedom of movement without contact noise, low contact pressure, feather-light and comfortable, easy to put on and take off, ideal protection for constantly changing noise levels Standard EN352-2 Material Polyurethane (PUR) Polyoxymethylene (POM) Thermoplastic elastomers (TPE) Sound insulation value (SNR) = 27 db(a) Ear plugs Spark Plugs soft Comfortable protection for works that require constant ear protection during high levels of noise Standard EN352-2 Material Polyurethane (PUR) Sound insulation value 35 db(2) Sound insulation value (SNR) = 35 db(a) Box with 200 pairs packed in pairs

308 308 Occupational health and safety 4 Technical equipment and accessories Protective gloves in professional quality, lined palm, rubberized cuffs, values Colour yellow Size 0.5 Material full cow hide Standard EN 388, Cat. 2 Application range haulage, vehicle fleets, waste industry, airports, rail operations, harbour and canal work etc. TÜV/GS-tested Knitted gloves Seamless, made with special grey stretch material, special black coating on the palm and fingertips, excellent fit Colour Standard grey/black EN 420/EN 338 Cat. II Size Knitted gloves SKIN SENSITIVE: extremely thin and light 8-gauge nylon knitted glove, very high touch sensitivity combined with the highest wearing comfort, perfect dexterity, with knitted cuff Colour blue/black Standard EN 420, EN 338 cat Material: PU coating on nylon, black: palm, index fingers, thumbs and finger tips Nylon, blue: back of hands, gauntlet and knitted cuff Application range suitable for working where finger-tip sensitivity is required Size

309 Occupational health and safety 309 Protective gloves professional quality, palm is padded and the cuffs are rubberised, refl ective strips on the knuckle protection, backs of the hand and cuffs are fl uorescent Size 0 Material Full grain cowhide Standard EN 388, Cat. 2 Application range haulage, vehicle fleets, waste industry, airports, rail operations, harbour and canal work etc. Safety shoes LEMON FRESH ACT Steel toe cap, FlexGuard plastic midsole, Bata Cool Comfort lining, PU/PU sole, quick-action zip closure Version ESD - electrostatic discharge Width 0 Colour black/green Material Microfibre Standard EN ISO 20345/SP SRC 4 Technical equipment and accessories Size Size

310 30 Occupational health and safety 4 Technical equipment and accessories Safety shoes NOVA QUBIT-ESD Protective toecap, FlexGuard plastic midsole, Bata Cool Comfort lining, black PU midsole, grey/orange TPU outsole Version ESD - electro-static discharge Colour black/orange Material Microfibre Width 0 Protection class SP Size Size Safety shoes NOVA ZIP-ESD Protective toecap, FlexGuard plastic midsole, Bata Cool Comfort lining, black PU midsole, grey/orange TPU outsole Version ESD - electro-static discharge Colour black/orange Material Microfibre Width 0 Protection class SP Size Size

311 Occupational health and safety 3 Vehicle first-aid box Contents clearly arranged in 6-compartment folding bag Version with rescue blanket Material ABS plastic Standard DIN Application range for passenger cars, trucks and buses with up to 22 seats (2 boxes are necessary for buses with more than 23 seats) First-aid case including profession-related additional contents with main focus on workshops, with wall bracket, integrated carrying handle and screw closures, the inner dividers are adjustable and each side of the case has a transparent cover Dimensions 340 x 240 x 20 mm Material impact-proof ABS plastic Application range especially for repair and maintenance companies and all other technical workshop companies Basic contents DIN 3 57 with additional contents: e.g. antiseptic wipes, sachets of burn gel, cohesive bandages, finger cots, eye patch with elastic, elastic bandages, safety pins and tweezers Technical equipment and accessories Oil binding agent Absorbent aerated concrete granulate on the basis of calcium silicate hydrate. Oil and chemical binders for the absorption of oils and other leaked liquids. Suitable for circulation areas. For cleaning and protecting industrial flooring and to cover hazardous traces oil on roads and runways, not water-repellent and not buoyant. EUROPART Standard Type III R oil binder ensures safe working conditions, is non-slip, non-toxic, nonflammable and leaves virtually no residue. - Binder for basic, alkaline substances (alkaline solutions) - Binder for flammable, combustible liquids - Type III R oil binders - Binder for aqueous and polar liquids The product is chemically inert with many liquids. It must not be used with e.g. oxidative substances and hydrofluoric acid. ltr oil binder binds 0.29 ltr. oil kg oil binder binds 0.63 ltr. oil kg oil binder binds 0.5 kg oil Contents Container 40 l Sack

312 32 Reference list 3/2-way valve....xf /2-way valve....cf...62 'A' frame....xf 'A' frame....cf...44, 45 ABS pressure control valve....xf ABS pressure control valve....cf...58 ABS pressure control valve....lf ABS relay valve....xf ABS relay valve....cf...6 ABS relay valve....lf ABS ring....xf ABS ring....cf...50 Air deflector....xf Air dryer....xf , 54 Air dryer....cf...56 Air dryer cartridge....xf Air dryer cartridge....cf...56, 57 Air dryer cartridge....lf Air filter....xf Air filter....cf...24 Air filter....lf Air horn kit....accessories Air spring....xf , 34 Air spring....cf...34, 35 Air spring....lf...2 Air spring bellows....xf Air-conditioning compressor....xf Air-conditioning compressor....cf...92, 93 Air-conditioning compressor....lf Air-conditioning service unit....accessories ALB controller....xf , 6 ALB controller....cf...58 Alternating check valve....lf Alternator....XF , 79 Alternator....CF...76, 77 Alternator....LF...232, 233 Axle leg bolt press set....accessories Ball joint....xf Ball joint....cf Ball joint....lf Battery box cover....xf Battery charger....accessories Battery tester....accessories Beamsetter....Accessories Bearing....XF Blowoff valve....xf Blowoff valve....cf...59 Body parts....xf , 8, 83 87, 89 9 Body parts....cf...78, 79, 8 83 Body parts....lf...234, 235 Booster heating....accessories Bottle cooler....accessories Bracket....XF Brake caliper....xf Brake caliper....cf...53 Brake caliper....lf...29 Brake caliper key....accessories Brake disc....xf Brake disc....cf...53 Brake disc....lf...22 Brake drum....xf Brake drum....cf...55 Brake lining set....xf Brake lining set....cf...55 Brake maintenance unit....accessories Brake pad sensor....lf

313 Reference list 33 Brake pad set....xf , 5 Brake pad set....cf...53, 54 Brake pad set....lf...220, 22 Brake signal transmitter....xf Brake signal transmitter....cf...60 Brake spring pliers....accessories Bulb....Accessories Cab damper...xf Cab mudguard....xf Cab mudguard....cf...78 Cabin filter....xf Cabin filter....cf...95 Cabin filter....lf...24 Cable connector unlocking kit....accessories Case for hazardous goods Accessories Central silencer....xf Central silencer....cf Central silencer....lf...98 Centring sleeves set....accessories Charge air cooler....xf Charge air hose....xf Charge air hose....cf...6 Charging pressure sensor....xf Charging pressure sensor....cf...6 Charging pressure sensor....lf Clutch kit....xf , 30 Clutch kit....cf...29, 30 Clutch kit....lf Clutch plate....xf Clutch plate....cf...30, 3 Clutch plate....lf Clutch releaser....xf Clutch releaser....cf...3, 32 Clutch releaser....lf...20 Clutch servo....xf Clutch servo....cf...33 Clutch servo....lf...20 Combination brake cylinder....xf Combination brake cylinder....cf...63 Complete mirror system....lf...236, 237 Compressor....XF Compressor....CF...56 Compressor cool box....accessories Condenser....XF Condenser....CF...93 Condenser....LF Continuous pressure powder fire extinguisher....accessories Cool box.... Accessories , 25 Coolant expansion tank....xf Coolant expansion tank....lf Coolant filter....xf Coolant temperature sensor XF Coolant temperature sensor CF....7 Coupling head....xf Coupling head....cf...63, 64 Coupling head....lf Coupling pressure plate....xf Coupling pressure plate....cf...3 Coupling pressure plate....lf...208, 20 Deflection pulley/guide pulley....xf Deflection pulley/guide pulley....cf...28, 29 Deflection pulley/guide pulley....lf Detergent sprayer....accessories Diagnosis unit....accessories Diesel emissions tester....accessories Digital multimeter....accessories

314 34 Reference list Door....XF Drag-link....XF Drag-link....CF...38, 39 Drag-link....LF...24 Driver cab tilt cylinder....xf Driver cab tilt cylinder....cf...95 Driver cab tilting pump....xf Driver cab tilting pump....cf...95 Dryer....CF...93 Dungarees....Accessories Ear plugs....accessories Ear plugs on strap....accessories EBS axle modulator....xf EBS axle modulator....cf...60 EBS trailer control valve....xf EBS trailer control valve....cf...60 ECAS path sensor....xf ECAS path sensor....cf...64 ECAS path sensor....lf ECAS solenoid valve....xf , 66 ECAS solenoid valve....cf...64, 65 ECAS solenoid valve....lf Electrical ballast....xf Electrical ballast....cf...94 Emergency warning Softshell jacket....accessories Emergency warning waistcoat....accessories End-outline marker lamp....xf End-outline marker lamp....cf...69 End-outline marker lamp....lf Engine Parts....XF , Engine Parts....CF Engine Parts....LF...98 Engine radiator XF Engine radiator CF....7 Engine radiator LF Entry....LF Evaporator....LF Exhaust turbocharger....xf Exhaust turbocharger....cf...6 Exhaust turbocharger....lf...99 Expansion valve....xf Expansion valve....cf...94 Fan wheel....xf Fan wheel....cf...7, 8 Fastening clamp....xf Fastening clamp....cf...74 Fifth wheel.... Accessories , 246 Filing table....xf , 96 Filling and bleeding station....accessories Filter dryer....xf Filter dryer....cf...93 Fine dust mask....accessories Fire extinguisher box....accessories First-aid case....accessories....3 Fittings set....accessories Flap....CF...83 Flaring tool kit....accessories Foot brake valve....xf Four-circuit protection valve....xf Four-circuit protection valve....cf...58 Four-circuit protection valve....lf Front mirror....xf Front mirror....cf...88 Front mirror....lf Fuel Anti-syphon....XF Fuel Anti-syphon....CF

315 Reference list 35 Fuel cap....xf Fuel cap....cf...25 Fuel cap....lf Fuel filter....xf , 22 Fuel filter....cf...22, 23 Fuel filter....lf Fuel pre-filter....xf , 22 Fuel pre-filter....cf...22, 23 Full view protective goggles....accessories Gas spring....xf Gas spring....cf...8 Generator regulator....xf Generator regulator....cf...77 Generator regulator....lf Guide bearing....xf Guide bearing....cf...33 H auxiliary driving lamp....accessories H fog light....xf H fog light....cf...68 H fog light....lf H halogen headlamp bulb....accessories H spotlight....accessories H/H7 main headlamp....lf H fog light....xf H fog light....cf...67 H fog light....lf H3 fog light....xf H3 fog light....cf...67 H3 fog light....lf H3 halogen headlamp bulb....accessories H4 halogen headlamp bulb....accessories H4 main headlamp....xf H4 main headlamp....cf...67 H7 halogen headlamp bulb....accessories H7 Spotlight....Accessories H7/H main headlamp....xf H7/H main headlamp....cf...66 H7/H main headlamp....lf Halogen bulb....accessories Hand brake valve....xf Hand brake valve....cf...59 Hand feed pump....xf Headlamp bulb....accessories Headlight bracket....xf , 76 Headlight bracket....cf...74 Heat exchanger....xf Heat exchanger....cf...9, 92 High performance grease....accessories Hinge....XF Hose clip....xf Hose clip pliers....accessories Hydraulic filter....xf Hydraulic filter....cf...2, 22 Hydraulic filter....lf Impact socket....accessories Indicator....XF Indicator....CF...7 Indicator....LF...23 Indicator light....xf , 70 Indicator light....cf...68 Indicator light....lf Indicator switch....xf Indicator switch....cf...74 Interior fan....xf Interior fan....cf...94

316 36 Reference list Interior fan....lf...240, 24 Jack....Accessories Kettle....Accessories Kingpin kit....xf Kingpin kit....cf...49 Knee cushion....accessories Knee pads....accessories Knitted gloves....accessories Laser axle measuring system....accessories Leaf spring....xf , 36 Leaf spring....cf...36, 37 Leaf spring....lf...22, 23 LED auxiliary driving lamp....accessories LED control unit....xf LED control unit....cf...7 LED control unit....lf...23 LED flashing warning light....accessories LED flashing warning light set....accessories LED head lamp....accessories LED indicator light....xf LED indicator light....cf...68 LED rear light....xf , 72 LED rear light....cf...70, 7 LED rear light....lf LED reversing light....accessories LED rotating beacon....accessories LED side marker light XF LED work lamp....accessories LED working floodlight....accessories LED working light rail....accessories Lubricant sensor....xf Lubricant sensor....cf...52 Lubricant sensor....lf...28 Main mirror XF Main mirror CF Main mirror LF Marking board....accessories Marking board set....accessories Membrane brake cylinder....xf Mirror head....lf...237, 238 Mobile Column Lifts....Accessories Motor turning gear.... Accessories , 278 Muffler....XF Muffler....CF...58 Muffler....LF Number panel.... Accessories , 272 Oil binding agent....accessories....3 Oil cooler....xf , 24 Oil cooler....cf...24, 25, 33 Oil cooler gasket set....xf Oil cooler gasket set....cf...25 Oil filter....xf Oil filter....cf...2 Oil filter....lf Oil filter spanner....accessories Oil filter spider....accessories Oil pressure sensor....xf Operating unit....xf Operating unit....cf...65 Operating unit....lf Oscilloscope....Accessories

317 Reference list 37 Parking warning sign....accessories Piston brake cylinder....xf Piston brake cylinder....cf...63 Piston ring cable tie....accessories Piston ring pliers....accessories Pitman spring....lf...23 Plastic pipe....accessories Poly-V belt tensioner....xf , 27 Poly-V belt tensioner....cf...27, 28 Poly-V belt tensioner....lf Position light....cf...69 Power bit socket....accessories Power-steering pump....xf Power-steering pump....cf...44 Pressure control valve....xf Pressure control valve....cf...59 Pressure control valve....lf Pressure sensor....xf Pressure sensor....lf Protective gloves.... Accessories , 309 Protective goggles....accessories Quick-release valve....xf Quick-release valve....cf...62 Radiator fan....lf Radiator fan coupling....xf Radiator fan coupling....cf...8, 9 Radiator fan coupling....lf Ramp mirror....xf Ramp mirror....cf...90 Ramp mirror....lf Rear light....xf , 74 Rear light....cf Rear light....lf...23, 232 Rear silencer....lf...99 Rechargeable powder fire extinguisher....accessories Reflective tape....accessories Refractometer....Accessories Relay valve....xf Relay valve....cf...6, 62 Relay valve....lf Release fork....xf , 32 Release fork....cf...32 Repair kit....xf Repair kit....cf...45, 47, 48 Repair kit....lf...26, 27, 29, 223 Ribbed V-belt....XF Ribbed V-belt....CF...26 Ribbed V-belt....LF Ribbed V-belt set....xf Ribbed V-belt set....cf...26 Ribbed V-belt set....lf Roller-type brake test stand....accessories Safety shoes.... Accessories , 30 Screw....XF Screw....CF...42 Screw set....xf Sealing ring....xf Sealing ring....cf...5 Self-locking nut socket.... Accessories , 277 Shaft sealing ring....xf Shaft sealing ring....cf...50 Shock absorber....xf , 35 Shock absorber....cf...35 Shock absorber....lf...22

318 38 Reference list Side marker light....xf Side marker light....cf...70 Side marker light....lf Side window wind deflector....xf Sidebar....XF , 85 Signal horn....accessories Silent bush....cf...37 Silent bush....lf...23 Skirting protection bracket...xf Slack adjuster....xf Slack adjuster....cf...55 Solenoid valve....xf Solenoid valve....cf...6 Speed sensor....xf , 63 Speed sensor....cf...62 Speed sensor....lf...225, 226 Speed sensor set....xf Speed sensor set....cf...62 Speed sensor set....lf Spring brake chamber....cf...63 Spring bushing....xf Spring bushing....cf...37 Spring bushing....lf...23 Stabiliser....CF...48 Stabilizer mounting XF Stabilizer mounting CF Stabilizer mounting LF Start booster.... Accessories , 296 Starter battery.... Accessories , 256 Starter Motor....XF Starter Motor....CF...75 Starter Motor....LF Steering Track Rod....XF , 4 Steering Track Rod....CF...43, 44 Sunshade....XF Tachograph card....accessories Tapered roller bearing....xf Tapered roller bearing....cf...5, 52 Tapered roller bearing....lf...27, 28 Thermal paper....accessories Toolbox....Accessories Trailer control valve....xf Trailer control valve....lf Trailer hitch....accessories Trailing arm....xf , 44 Trailing arm....cf...46 Trailing arm and transverse link....cf...48 Tread set....xf , 92 Trolley Jack....Accessories Truck driver's seat....xf , 95 Truck driver's seat....cf...85 Tyre mounting machine....accessories Unlocking tool.... Accessories , 280 Urea filter....xf Urea filter....cf...24 Urea filter....lf V-belt....XF V-belt....CF...28 Vehicle bracket....accessories Vehicle first-aid box....accessories....3 Warning panel....accessories Washer fluid pump....xf Washer fluid pump....cf...9 Water pump....xf

319 Reference list 39 Water pump....cf...9, 20 Water pump....lf Water pump seal....xf Water pump seal....cf...20 Wheel balancing machine....accessories Wheel bearing....xf Wheel bearing....cf...52 Wheel bearing....lf...28 Wheel bolt....xf Wheel bolt....cf...50 Wheel cover.... Accessories , 249 Wheel hub....xf Wheel hub....cf...5 Wheel hub cover....cf...52 Wheel nut....xf , 48 Wheel nut....cf...50, 5 Wheel nut....lf...27 Wheel nut cap....accessories Wheel stud cover ring....accessories Wide angle mirror....xf Wide angle mirror....cf Wide angle mirror....lf Wind deflector....cf...78 Window winder....xf Window winder....cf...9 Window winder....lf Windscreen....XF Wing, driver cab....xf , 92 Wing, driver cab....cf...84 Wing, rear axle....xf , 85, 89, 93 Wing, rear axle....cf...80, 84 Wiper arm....xf Wiper blade....xf Wiper blade....cf...86 Wiper blade....lf Wiper motor....xf Wiper motor....cf...86 Work jacket....accessories Work trousers....accessories Workshop-pit lifters....accessories Xenon headlamp....xf Xenon headlamp....cf...66

320

321

322 Looking for solutions? Come to us for expert advice. First-class advice: Expert service in every area Our staff are continuously trained in specific products and specialist areas, so that you can always rely on expert advice of the highest level. This ensures a first-class all-round service, providing a professional solution for you in all situations. We also keep in constant contact with our suppliers and manufacturers, so you can be sure that even for complex products no problem goes unsolved and no request is ignored. EUROPART Europe s No. for truck, trailer, van and bus spare parts.

323