Johnson Price Guide by Gunnebo Lifting Effective May 1, 2012

Transcription

1 Johnson Price Guide by Gunnebo Lifting Effective May 1, 2012

2 P r i c e G u i d e CONTENTS PAGE Introduction Crane Blocks Quick Reeve Crane Blocks Scrap Handling Block Crane Block Options and Modifications Kits Overhaul Balls Swivels Open Wedge Sockets Tilt Wall Blocks Snatch Blocks Derrick Snatch Block & Personnel Lifting Snatch Block Oilfield Blocks Fixed Bail Construction and Marine Rigging Blocks ForgeFab Sheaves Wire Rope Sheaves and Sheave Assemblies Conversions Display Rack Conditions Sale and ed Warranty NOTE: The data presented in this catalog is limited to pricing only. For complete information on product, product dimensions, product maintenance, applications and safety, refer to Gunnebo Johnson s General Catalog. (800) World Class Standard Excellence

3 8 Ton Snatch Block Scrap Handling Block Overhaul Ball Wire Rope Sheaves Shorty-J Crane Block Quick Reeve Crane Block Personnel Lifting Snatch Block Derrick Snatch Block Eye Hook Swivel TILT Wall Block Custom Engineering 500T Mobile Crane Construction & Marine Rigging Block INDUSCO 1200 W. Hamburg Street Baltimore, MD (410) FAX (410) RICHARD F. PAYNE INC. 460 Podlin Drive Franklin Park, IL (630) FAX (630) RIGGERS SERVICES INC SE 82nd Drive Gladstone, OR (503) FAX (503) DISTRIBUTION CENTERS PRIME LINE MARKETING INC. 198 Norman Street West Springfield, MA (413) FAX (413) GUNNEBO JOHNSON CORP Distribution Drive, Bldg 4 Tampa, FL (813) FAX (813) GUNNEBO JOHNSON CORP. 12 North Harvard Tulsa, OK (918) (800) FAX (918) GUNNEBO JOHNSON CORP S. Loop East Houston, TX (713) FAX (713) BAIRSTOW DISTRIBUTING INC Ellsworth Industrial Dr. N.W. Atlanta, GA (4) FAX (4) Westrep Enterprises Inc Encinita Avenue Temple City, CA (626) FAX (626) TOLL FREE-US (800)

4 THE JOHNSON Engineered and manufactured with the Johnson advantages, the ShortyJ is one today s most popular crane blocks and represents the broadest line standard crane blocks in the industry. With over 1500 models to choose from, Gunnebo Johnson Corporation is sure to manufacture the exact block to meet your requirements. THE JOHNSON J-LATCH Simply the best positive locking hook latch you can find. The exclusive, OSHA approved, Johnson J-LATCH is actually made with a unique steel beam technology. The J-LATCH positively engages a special recessed area in the Johnson Hook. The removable two-position pin allows operation as either a locked bar or an automatic spring latch. Make sure to get the Johnson J-LATCH protection with everyshorty-j Crane Block. Computer Automated Design Whether your requirement is for a custom or standard block, Gunnebo Johnson Corp. is prepared to supply your requirements using the latest technology available. Our engineering staff s combined experience affords Gunnebo Johnson Corp. the ability to produce quality designed products utilizing the most current C.A.D. methods. Our unique automated designs are rigorously monitored for consistency by a quality assurance and quality control group, which operates as a separate entity within the organization in order to assure customer satisfaction on every block. KEY TO J-BLOCK S J 20 Q 12 B T B WORKING SHEAVE SIZE HOOK-THRUST LIMIT-TONS -NOM. O.D. BEARING OF SHEAVES: SHEAVE CHEEK JOHNSON S=1 BEARING: WEIGHTS: CRANE D=2 B=BRONZE A=NO WTS. BLOCK T=3 BUSHING AB=MED.WTS. Q=4 R=ROLLER B=STD. WTS. QN=5 BEARING C=X-HEAVY SX=6 T=TAPERED WTS. SV=7 ROLLER OCT=8 BEARING TO ORDER, PLEASE SPECIFY: -WIRE ROPE SIZE-DESIRED OPTIONS 2

5 SHORTY J CRANE BLOCK Field Maintenance Ease The construction the ShortyJ adds to its field convenience. Johnson makes allowance for inevitable maintenance. The construction the J-Block is basicallypin & nut, which means that it is capable being either partially or wholly dismantled. All that is required to change out a hook, for example, is the removal a set or cap screw and hook nut. Even sheave replacement can be accomplished with only minor partial disassembly. ForgeFab Sheaves Exclusively Gunnebo Johnson Corp., this revolutionary process produces a superior sheave. Manufactured from a steel disc cut from alloy steel plate, the disc is fired, its rim coming into contact with a heavy alloy roller which forms and forges the rim and wire rope groove. This process produces a stronger web/rim design, whose machined seamless tubing hub is double fillet welded to the web. This cost effective process can be obtained in any number diameters, widths, and tolerances, making Gunnebo Johnson Corp. ForgeFab Sheaves the best value on the market. Standard Features 5 through 0 ton capacity. 4 to 1 design factor. 1 through 8 sheaves. 10 through 30-inch sheave diameters. Reeving guides, all models. Bronze bushed and roller bearing sheaves. Direct channel sheave bearing lubrication through center pin. Flame hardened grooves on sheave sizes 16 through 30-inch diameters. Dual action (swing/swivel) roller thrust bearing hooks. Forged steel hooks - 5 through 30 tons. Total disassembly capability. Individual Sheave Lubrication Channels The ShortyJ Block eliminates the disadvantage individual sheave lubrication. Lubrication is achieved through recessed grease fittings in the ends the center pin. Each bearing is lubricated individually by means independent lube channels in the center pin. Swing/Swivel Dual action ShortyJ Roller Thrust Bearing Hook Crane Block Options The ShortyJ Block is designed so that the user pays only for those options which will make a definite contribution to the job requirement. Such options include duplex hooks, swivel tee and shackle assemblies, antirotation locking devices, sheave shrouds, and cheek weight kits. Each item is sold individually as an option in order to assure that you need only purchase the items necessary to fulfill the job at hand. Optional Features Forged steel hooks - 35 through tons Cast alloy steel duplex hooks with bar latch- 25 through 450 tons Forged steel duplex hooks Anti-rotation locking devices, all models Swivel safety anchor shackles, all models Sheave shrouds, all models Detachable cast iron and steel cheek weights, all models Pull test and certification, ultrasound, magnetic particle, and other non-destructive testing to specification designated by customer 3

6 C r a n e B l o c k s Sheaves Sheave Diameter 5 TON J5S10BTA , J5S10BTB , J5S10RTA , J5S10RTB , J5S12BTA , J5S12BTB , J5S12BTC , J5S12RTA , J5S12RTB , J5S12RTC , J5D10BTA , J5D10BTB , J5D10RTA , J5D10RTB , TON J10S10BTA , J10S10BTB , J10S10RTA , J10S10RTB , J10S12BTA , J10S12BTB , J10S12BTC , J10S12RTA , J10S12RTB , J10S12RTC , J10S14BTA , J10S14BTAB , J10S14BTB , J10S14BTC , J10S14RTA , J10S14RTAB , J10S14RTB , J10S14RTC , J10D10BTA , J10D10BTB , J10D10RTA , J10D10RTB , J10D12BTA , J10D12BTB , J10D12BTC , J10D12RTA , J10D12RTB , J10D12RTC , J10D14BTA , J10D14BTAB , J10D14BTB , J10D14BTC , J10D14RTA , J10D14RTAB , J10D14RTB , J10D14RTC , J10T10BTA , Sheaves Sheave Diameter J10T10BTB , J10T10RTA , J10T10RTB , TON J15S10BTA , J15SlOBTB , J15S10RTA , J15S10RTB , J15S12BTA , J15S12BTB ,8.00 J15S12BTC , J15S12RTA , J15S12RTB , J15S12RTC , J15S14BTA , J15S14BTB , J15S14BTC , J15S14RTA , J15S14RTAB , J15S14RTB , J15S14RTC , J15S16RTA , J15S16RTB , J15S16RTC , J15D10BTA , J15D10BTB , J15D10RTA , J15D10RTB , J15D12BTA , J15D12BTB , J15D12BTC , J15D12RTA , J15D12RTB , J15D12RTC , J15D14BTA , J15D14BTAB , J15D14BTB , J15D14BTC , J15D14RTA , J15D14RTAB , J15D14RTB , J15D14RTC , J15T10BTA , J15T10BTB , J15T10RTA , J15T10RTB , J15T12BTA , J15T12BTB , J15T12BTC , J15T12RTA , J15T12RTB , J15T12RTC , J15Q10RTA , J15Q10RTB ,

7 C r a n e B l o c k s Sheaves Sheave Diameter 20 TON J20S12BTA , J20S12BTB , J20S12BTC , J20S12RTA , J20S12RTB , J20S12RTC , J20S14BTA , J20S14BTB , J20S14BTC , J20S14RTA , J20S14RTAB , J20S14RTB , J20S14RTC , J20S16RTA , J20S16RTB , J20S16RTC , J20S18BTA , J20S18BTB , J20S18BTC , J20S18RTA , J20S18RTB , J20S18RTC , J20D10BTA , J20D10BTB , J20D10RTA ,6.00 J20D10RTB , J20D12BTA , J20D12BTB , J20D12BTC , J20D12RTA , J20D12RTB , J20D12RTC , J20D14BTA , J20D14BTAB , J20D14BTB , J20D14BTC , J20D14RTA , J20D14RTAB , J20D14RTB , J20D14RTC , J20D16RTA , J20D16RTB , J20D16RTC , J20T10BTA ,8.00 J20T10BTB , J20T10RTA , J20T10RTB , J20T12BTA , J20T12BTB , J20T12BTC , J20T12RTA , J20T12RTB , Sheaves Sheave Diameter J20T12RTC , J20T14BTA ,8.00 J20T14BTAB , J20T14BTB , J20T14BTC , J20T14RTA , J20T14RTAB , J20T14RTB , J20T14RTC , J20Q10RTA , J20Q10RTB , J20Q12RTA , J20Q12RTB ,1.00 J20Q12RTC , J20T12RTC , TON J25S14BTA , J25S14BTB , J25S14BTC , J25S14RTA , J25S14RTAB , J25S14RTB , J25S14RTC , J25S16RTA , J25S16RTB , J25S16RTC , J25S18BTA , J25S18BTB , J25S18BTC , J25S18RTA , J25S18RTB , J25S18RTC , J25S20RTA , J25S20RTB , J25S20RTC , J25D12BTA , J25D12BTB , J25D12BTC , J25D12RTA , J25D12RTB , J25D12RTC ,9.00 J25D14BTA , J25D14BTAB , J25D14BTC , J25D14RTA , J25D14RTAB , J25D14RTB , J25D14RTC , J25D16RTA , J25D16RTB , J25D16RTC , J25D18RTA , J25D18RTB ,

8 C r a n e B l o c k s Sheaves Sheave Diameter J25D18RTC , J25D20RTA , J25D20RTB , J25D20RTC , J25T10BTA ,8.00 J25T10BTB , J25T10RTA , J25T10RTB , J25T12BTA , J25T12BTB , J25T12BTC , J25T12RTA , J25T12RTB , J25T12RTC , J25T14BTA , J25T14BTAB , J25T14BTB , J25T14BTC , J25T14RTA , J25T14RTAB , J25T14RTB , J25T14RTC , J25T16RTA , J25T16RTB , J25T16RTC , J25T18RTA , J25T18RTB , J25T18RTC , J25Q10RTA , J25Q10RTB , J25Q12RTA , J25Q12RTB , J25Q12RTC , J25Q14RTA , J25Q14RTB , J25Q14RTC , J25QN10RTA ,8.00 J25QN10RTB , J25QN12RTA , J25QN12RTB , J25QN12RTC , J25QN14RTA , J25QN14RTB , J25QN14RTC , J28Q14RTB , TON J30S16RTA , J30S16RTB , J30S16RTC , J30S18RTA , J30S18RTB , J30S18RTC ,4.00 Sheaves Sheave Diameter J30S20RTA , J30S20RTB , J30S20RTC , J30S24BTA , J30S24BTB ,3.00 J30S24BTC , J30S24RTA ,4.00 J30S24RTB , J30S24RTC , J30D14BTA , J30D14BTAB , J30D14BTB , J30D14BTC , J30D14RTA , J30D14RTAB , J30D14RTB , J30D14RTC , J30D16RTA , J30D16RTB , J30D16RTC , J30D18RTA , J30D18RTB , J30D18RTC , J30D20RTA , J30D20RTB , J30D20RTC , J30T12RTA ,5.00 J30T12RTB , J30T12RTC , J30T14RTA , J30T14RTAB , J30T14RTB , J30T14RTC , J30T16RTA ,6.00 J30T16RTB , J30T16RTC , J30T18RTA , J30T18RTB , J30T18RTC , J30T20RTA , J30T20RTB , J30T20RTC , J30Q12RTA , J30Q12RTB , J30Q12RTC , J30Q14RTA , J30Q14RTB , J30Q14RTC , J30Q16RTA , J30Q16RTB , J30Q16RTC , J30QN12RTA , J30QN12RTB , J30QN12RTC ,

9 C r a n e B l o c k s Sheaves Sheave Diameter J30QN16RTA , J30QN16RTB , J30QN16RTC , J30SX14RTA , J30SX14RTB ,3.00 J30SX14RTC , TON J35S18RTA , J35S18RTB , J35S18RTC , J35S20RTA , J35S20RTB , J35S20RTC , J35S24RTA , J35S24RTB , J35S24RTC ,5.00 J35D16RTA , J35D16RTB , J35D16RTC ,6.00 J35D18RTA , J35D18RTB , J35D18RTC , J35D20RTA , J35D20RTB , J35D20RTC , J35D24RTA , J35D24RTB , J35D24RTC , J35T14BTA , J35T14BTAB , J35T14BTB , J35T14BTC , J35T14RTA , J35T14RTAB , J35T14RTB , J35T14RTC , J35T16RTA , J35T16RTB , J35T16RTC , J35T18RTA , J35T18RTB , J35T18RTC , J35T20RTA , J35T20RTB , J35T20RTC , J35Q12RTA , J35Q12RTB , J35Q12RTC , J35Q14RTA , J35Q14RTB , J35Q14RTC , J35Q16RTA , J35Q16RTB , Sheaves Sheave Diameter J35Q16RTC , J35QN14RTA , J35QN14RTB , J35QN14RTC , J35QN16RTA , J35QN16RTB , J35QN16RTC ,7.00 TON JS20RTA , JS20RTB , JS20RTC , JS24BTA , JS24RTA , JS24RTB , JS24RTC , JD18RTA , JD18RTB , JD18RTC , JD20RTA , JD20RTB , JD20RTC , JD24RTA , JD24RTB , JD24RTC , JT16RTA , JT16RTB , JT16RTC , JT18RTA , JT18RTB , JT18RTC , JT20RTA , JT20RTB , JT20RTC , JQ14RTA , JQ14RTB , JQ14RTC ,0.00 JQ16RTA , JQ16RTB , JQ16RTC , JQ18RTA , JQ18RTB , JQ18RTC , JQN14RTA , JQN14RTB , JQN14TRC , JQN16RTA , JQN16RTB ,4.00 JQN16RTC , JSX14RTA , JSX14RTB , JSX14RTC , JSX16RTA , JSX16RTB ,

10 C r a n e B l o c k s *DESIGN FACTOR 3:5 TO 1 Sheaves Sheave Diameter JSX16RTC , JSX18RTA ,8.00 JSX18RTB , JSX18RTC , TON J45D20RTA* , J45D20RTB* , J45D20RTC* , J45D24RTA* , J45D24RTB* , J45D24RTC* , J45T16RTA* , J45T16RTB* , J45T16RTC* , J45T18RTA* , J45T18RTB* , J45T18RTC* , J45T20RTA* , J45T20RTB* , J45T20RTC* , J45Q14RTA* , J45Q14RTB* , J45Q14RTC* ,0.00 J45Q16RTA* , J45Q16RTB* , J45Q16RTC* , J45Q18RTA* , J45Q18RTB* , J45Q18RTC* , J45QN14RTA* , J45QN14RTB* , J45QN 14RTC* , J45QN 16RTA * , J45QN16RTB* ,4.00 J45QN 16RTC* , J45SX16RTA* , J45SX16RTB* , J45SX16RTC* , J45SX18RTA* , J45SX18RTB* , J45SX18RTC* , TON J50D20RTA , J50D20RTB , J50D20RTC , J50D24RTA , J50D24RTB , J50D24RTC , J50T18RTA , J50T18RTB , J50T18RTC , J50T20RTA , J50T20RTB , Sheaves Sheave Diameter J50T20RTC , J50T24RTA , J50T24RTB , J50T24RTC , J50Q16RTA , J50Q16RTB , J50Q16RTC , J50Q18RTA , J50Q18RTB , J50Q18RTC , J50Q20RTA , J50Q20RTB , J50Q20RTC , J50QN16RTA , J50QN16RTB , J50QN16RTC , J50SX16RTA , J50SX16RTB , J50SX16RTC , J50SX18RTA , J50SX18RTB ,6.00 J50SX18RTC , TON JS24RTA , JS24RTB , JS24RTC , JD20RTA , JD20RTB ,8.00 JD20RTC , JD24RTA , JD24RTB , JD24RTC ,0.00 JT18RTA , JT18RTB , JT18RTC , JT20RTA , JT20RTB , JT20RTC , JT24RTA , JT24RTB , JT24RTC , JQ16RTA , JQ16RTB , JQ16RTC , JQ18RTA , JQ18RTB , JQ18RTC , JQ20RTA , JQ20RTB , JQ20RTC , JQN14RTA , JQN14RTB ,537.00

11 C r a n e B l o c k s Sheaves Sheave Diameter JQN14RTC , JQN16RTA , JQN16RTB , JQN16RTC , JQN18RTA , JQN18RTB , JQN18RTC , JQN20RTA , JQN20RTB , JQN20RTC , JSX14RTA , JSX14RTB , JSX14RTC , JSX16RTA , JSX16RTB , JSX16RTC , JSX18RTA , JSX18RTB ,6.00 JSX18RTC , TON J60D24RTA* , J60D24RTB* , J60D24RTC* ,0.00 J60T18RTA* , J60T18RTB* , J60T18RTC* , J60T20RTA* , J60T20RTB* , J60T20RTC* , J60T24RTA* , J60T24RTB* , J60T24RTC* , J60Q16RTA* , J60Q16RTB* , J60Q16RTC* , J60Q18RTA* , J60Q18RTB* , J60Q18RTC , J60Q20RTA* , J60Q20RTB* , J60Q20RTC* , J60Q24RTA* , J60Q24RTB* , J60Q24RTC* , J60QN20RTA * , J60QN20RTB* , J60QN20RTC* , J60SX14RTA* , J60SX14RTB* , J60SX14RTC* , J60SX18RTA* , J60SX18RTB* ,6.00 J60SX18RTC* , *DESIGN FACTOR 3:5 TO 1 9 Sheaves Sheave Diameter 65 TON J65T20RTA , J65T20RTB , J65T20RTC , J65Q20RTA , J65Q20RTB , J65Q20RTC , J65QN16RTA , J65QN16RTB , J65QN16RTC , J65QN18RTA , J65QN18RTB , J65QN18RTC , J65QN20RTA , J65QN20RTB ,3.00 J65QN20RTC , J65SX20RTA , J65SX20RTB , J65SX20RTC , TON J70D24RTA , J70D24RTB , J70D24RTC , J70T18RTA , J70T18RTB , J70T18RTC , J70T20RTA , J70T20RTB , J70T20RTC , J70T24RTA ,7.00 J70T24RTB , J70T24RTC , J70Q16RTA , J70Q16RTB , J70Q16RTC , J70Q18RTA , J70Q18RTB , J70Q18RTC , J70Q20RTA , J70Q20RTB , J70Q20RTC , J70Q24RTA , J70Q24RTB , J70Q24RTC , J70QN16RTA , J70QN16RTB , J70QN16RTC , J70QN18RTA , J70QN18RTB , J70QN18RTC , J70QN20RTA , J70QN20RTB ,3.00 J70QN20RTC ,903.00

12 C r a n e B l o c k s Sheaves Sheave Diameter J70QN24RTA , J70QN24RTB , J70QN24RTC , J70SX16RTA , J70SX16RTB , J70SX16RTC , J70SX18RTA , J70SX18RTB , J70SX18RTC , J70SX20RTA , J70SX20RTB , J70SX20RTC , TON J75D24RTA , J75D24RTB , J75D24RTC , J75T20RTA , J75T20RTB , J75T20RTC , J75T24RTA , J75T24RTB , J75T24RTC , J75Q18RTA , J75Q18RTB , J75Q18RTC , J75Q20RTA , J75Q20RTB , J75Q20RTC , J75Q24RTA , J75Q24RTB ,1.00 J75Q24RTC , J75QN16RTA , J75QN16RTB , J75QN16RTC , J75QN20RTA , J75QN20RTB , J75QN20RTC , J75QN24RTA , J75QN24RTB , J75QN24RTC , J75SX18RTA , J75SX18RTB , J75SX18RTC , J75SX20RTA , J75SX20RTB , J75SX20RTC , TON J80D24RTA , J80D24RTB , J80D24RTC , J80T20RTA , J80T20RTB , J80T20RTC , Sheaves Sheave Diameter J80T24RTA , J80T24RTB ,1.00 J80T24RTC , J80Q16RTA , J80Q16RTB , J80Q16RTC , J80Q18RTA , J80Q18RTB , J80Q18RTC , J80Q20RTA , J80Q20RTB , J80Q20RTC , J80Q24RTA , J80Q24RTB , J80Q24RTC , J80QN16RTA , J80QN16RTB , J80QN16RTC , J80QN18RTA , J80QN18RTB , J80QN18RTC , J80QN20RTA , J80QN20RTB , J80QN20RTC , J80QN24RTA , J80QN24RTB , J80QN24RTC , J80SX16RTA , J80SX16RTB , J80SX16RTC , J80SX18RTA , J80SX18RTB , J80SX18RTC , J80SX20RTA , J80SX20RTB , J80SX20RTC , TON J90T24RTA , J90T24RTB ,9.00 J90T24RTC , J90Q20RTA , J90Q20RTB , J90Q20RTC , J90Q24RTA , J90Q24RTB , J90Q24RTC , J90QN20RTA , J90QN20RTB , J90QN20RTC , J90QN24RTA , J90QN24RTB , J90QN24RTC , J90SX18RTA ,

13 C r a n e B l o c k s Sheaves Sheave Diameter J90SX18RTB , J90SX18RTC , J90SX20RTA , J90SX20RTB , J90SX20RTC , J90SX24RTA , J90SX24RTB , J90SX24RTC , TON J100T24RTA , J100T24RTB ,9.00 J100T24RTC , J100Q20RTA , J100Q20RTB , J100Q20RTC , J100Q24RTA , J100Q24RTB , J100Q24RTC , J100QN18RTA , J100QN18RTB ,1.00 J100QN18RTC , J100QN20RTA , J100QN20RTB , J100QN20RTC , J100QN24RTA , J100QN24RTB , J100QN24RTC , J100SX18RTA , J100SX18RTB , J100SX18RTC , J100SX20RTA , J100SX20RTB , J100SX20RTC , J100SX24RTA , J100SX24RTB , J100SX24RTC , TON J110Q24RTA , J110Q24RTB , J110Q24RTC , TON J115Q24RTA , J115Q24RTB , J115Q24RTC , J115QN24RTA , J115QN24RTB , J115QN24RTC , J115SX18RTA , J115SX18RTB , J115SX18RTC , J115SX20RTA , J115SX20RTB , J115SX20RTC , Sheaves Sheave Diameter J115SX24RTA , J115SX24RTB , J115SX24RTC , TON J125Q24RTA , J125Q24RTB , J125Q24RTC , J125QN24RTA , J125QN24RTB , J125QN24RTC , J125SX18RTA , J125SX18RTB , J125SX18RTC , J125SX20RTA , J125SX20RTB , J125SX20RTC , J125SX24RTA , J125SX24RTB , J125SX24RTC , TON J130QN24RTA , J130QN24RTB , J130QN24RTC , J130SX18RTA , J130SX18RTB , J130SX18RTC , J130SX20RTA , J 130SX20RTB , J130SX20RTC , J130SX24RTA , J130SX24RTB , J130SX24RTC , TON J135Q24RTA , J135Q24RTB , J135Q24RTC , TON J1QN24RTA , J1QN24RTB , J1QN24RTC , J1SX18RTA , J1SX18RTB , J1SX18RTC , J1SX20RTA , J1SX20RTB , J1SX20RTC , J1SX24RTA , J1SX24RTB , J1SX24RTC , TON J150Q24RTA ,

14 C r a n e B l o c k s Sheaves Sheave Diameter J150Q24RTB , J150Q24RTC , J150QN24RTA , J150QN24RTB , J150QN24RTC , J150SX20RTA , J150SX20RTB , J150SX20RTC , J150SX24RTA , J150SX24RTB , J150SX24RTC , TON J165Q24RTA , J165Q24RTB , J165Q24RTC , J165QN24RTA , J165QN24RTB , J165QN24RTC , J165SX20RTA , J165SX20RTB , J165SX20RTC , J165SX24RTA , J165SX24RTB , J165SX24RTC , TON J200Q30TTA POA J200QN24RTA POA J200QN24RTB POA J200QN24RTC POA J200SX24RTA POA J200SX24RTB POA J200SX24RTC POA J200SX30RTA POA J200SX30RTB POA J200SX30RTC POA 250 TON J250SX30RTA POA J250SX30RTB POA J250SX30RTC POA J250SV24RTA POA J250SV24RTB POA J250SV24RTC POA 265 TON J265SX30RTA POA J265SX30RTB POA J265SX30RTC POA J265SV24RTA POA J265SV24RTB POA J265SV24RTC POA 300 TON J300SX30RTA POA J300SX30RTB POA *DESIGN FACTOR 3:5 TO 1 Sheaves Sheave Diameter J300SX30RTC POA J300SV24RTA POA J300SV24RTB POA J300SV24RTC POA 325 TON J325SX30RTA * POA J325SX30RTB* POA J325SX30RTC* POA J325SV24RTA* POA J325SV24RTB* POA J325SV24RTC* POA 350 TON J350OCT30TTA POA J350OCT30TTB POA J350OCT30TTC POA 0 TON J0N130TTA POA 12

15 Crane Blocks - Quick Reeve STANDARD FEATURES INCLUDE: Quick release, zinc plated, rope retention pin meets OSHA requirements for rope retention. Pin cannot be completely removed from block to avoid pin loss. Johnson J-Latch heavy duty, steel, lockable, spring loaded latch meets OSHA personnel lifting requirements. Rope end fitting will pass through block. Quick reeving upright design. Quick release zinc plated rope retention pins THE JOHNSON J-LATCH PROVIDES A FAST HOOK DEFORMATION INSPECTION POINT. J-Latch J-Latch STANDARD TONNAGE CAPACITIES FROM 5-1 TONS. LARGER CAPACITIES AVAILABLE UPON REQUEST. C r a n e B l o c k s Sheaves Sheave Diameter 10 TON QRJ10S10RTA , QRJ1OS1ORTB , QRJ10S12RTA , QRJ10S12RTB , QRJ10S12RTC , QRJ10S14RTA , QRJ10S14RTB , QRJ10S14RTC , QRJ10S16RTA , QRJ10S16RTB , QRJ10S16RTC , TON QRJ15S10RTA , QRJ15S10RTB , QRJ15S10RTC , QRJ15S12RTA , QRJ15S12RTB , QRJ15S12RTC , QRJ15S14RTA , QRJ15S14RTB , QRJ15S14RTC , QRJ15010RTA , QRJ1501ORTB , QRJ1501ORTC , QRJ15012RTA , QRJ15D12RTB , QRJ15D12RTC , Sheaves Sheave Diameter QRJ15D14RTA , QRJ15D14RTB , QRJ15D14RTC , QRJ15D16RTA , QRJ15D16RTB , QRJ15D16RTC , QRJ15T10RTA , QRJ15T10RTB , QRJ15T10RTC , QRJ15T12RTA , QRJ15T12RTB , QRJ15T12RTC , TON QRJ20S14RTA , QRJ20S14RTB , QRJ20S14RTC , QRJ20S16RTA , QRJ20S16RTB , QRJ20S16RTC , QRJ20S18RTA , QRJ20S18RTB , QRJ20S18RTC , QRJ20S20RTA , QRJ20S20RTB , QRJ20S20RTC , QRJ20D12RTA , QRJ20D12RTB , QRJ20D12RTC ,739.00

16 C r a n e B l o c k s Sheaves Sheave Diameter QRJ20D14RTA , QRJ20D14RTB , QRJ20D14RTC , QRJ20D16RTA , QRJ20D16RTB , QRJ20D16RTC ,1.00 QRJ20T12RTA , QRJ20T12RTB , QRJ20T12RTC , QRJ20T14RTA , QRJ20T14RTB , QRJ20T14RTC , TON QRJ25S18RTA , QRJ25S18RTB , QRJ25S18RTC , QRJ25S20RTA , QRJ25S20RTB , QRJ25S20RTC , QRJ25D12RTA , QRJ25D12RTB , QRJ25D12RTC , QRJ25D14RTA , QRJ25D14RTB , QRJ25D14RTC , QRJ25D16RTA , QRJ25D16RTB , QRJ25D16RTC ,1.00 QRJ25T12RTA , QRJ25T12RTB , QRJ25T12RTC , QRJ25T14RTA , QRJ25T14RTB , QRJ25T14RTC , QRJ25T16RTA , QRJ25T16RTB , QRJ25T16RTC , QRJ25T18RTA , QRJ25T18RTB , QRJ25T18RTC , QRJ25Q14RTA , QRJ25Q14RTB , QRJ25Q14RTC , QRJ25Q16RTA , QRJ25Q16RTB , QRJ25Q16RTC , QRJ30S18RTA , QRJ30S18RTB , QRJ30S18RTC , QRJ30S20RTA , QRJ30S20RTB , QRJ30S20RTC , QRJ30S24RTA , Sheaves Sheave Diameter QRJ30S24RTB , QRJ30S24RTC , QRJ30D16RTA ,2.00 QRJ30D16RTB , QRJ30D16RTC , QRJ30D18RTA , QRJ30D18RTB , QRJ30D18RTC , QRJ30T12RTA , QRJ30T12RTB , QRJ30T12RTC , QRJ30T14RTA , QRJ30T14RTB , QRJ30T14RTC , QRJ30T16RTA , QRJ30T16RTB , QRJ30T16RTC , QRJ30Q14RTA , QRJ30Q14RTB , QRJ3OQ14RTC , QRJ30Q16RTA , QRJ3OQ16RTB ,5.00 QRJ30Q16RTC , TON QRJ35S20RTA , QRJ35S20RTB , QRJ35S20RTC , QRJ35D18RTA , QRJ35D18RTB , QRJ35D18RTC , QRJ35T12RTA , QRJ35T12RTB , QRJ35T12RTC , QRJ35T14RTA , QRJ35T14RTB , QRJ35T14RTC , QRJ35T16RTA , QRJ35T16RTB , QRJ35T16RTC , QRJ35T18RTA , QRJ35T18RTB , QRJ35T18RTC , QRJ35Q14RTA , QRJ35Q14RTB , QRJ35Q14RTC , QRJ35Q16RTA , QRJ35Q16RTB , QRJ35Q16RTC , QRJ35Q18RTA , QRJ35Q18RTB , QRJ35Q18RTC , QRJ35QN14RTA , QRJ35QN14RTB ,

17 C r a n e B l o c k s *DESIGN FACTOR 3:5 TO 1 Sheaves Sheave Diameter QRJ35QN14RTC , QRJ35QN16RTA , QRJ35QN16RTB , QRJ35QN16RTC , TON QRJD16RTA , QRJD16RTB , QRJD16RTC , QRJD18RTA , QRJD18RTB , QRJD18RTC , QRJT16RTA , QRJT16RTB , QRJT16RTC , QRJT18RTA , QRJT18RTB , QRJT18RTC , QRJQ14RTA , QRJQ14RTB , QRJQ14RTC , QRJQ16RTA , QRJQ16RTB , QRJQ16RTC , QRJQ18RTA , QRJQ18RTB , QRJQ18RTC , QRJQN14RTA , QRJQN14RTB , QRJQN14RTC ,3.00 QRJQN16RTA , QRJQN16RTB , QRJQN16RTC , TON QRJ45T16RTA* , QRJ45T16RTB* , QRJ45T16RTC* , QRJ45T18RTA* , QRJ45T18RTB* , QRJ45T18RTC* , QRJ45T20RTA * , QRJ45T20RTB* ,8.00 QRJ45T20RTC* , QRJ45Q14RTA* , QRJ45Q14RTB* , QRJ45Q14RTC* , QRJ45Q16RTA* , QRJ45Q16RTB* , QRJ45Q16RTC* , QRJ45Q18RTA* , QRJ45Q18RTB* , Sheaves Sheave Diameter QRJ45Q18RTC* , TON QRJ50T16RTA , QRJ50T16RTB , QRJ50T16RTC , QRJ50T18RTA , QRJ50T18RTB , QRJ50T18RTC , QRJ50T20RTA , QRJ50T20RTB , QRJ50T20RTC , QRJ50Q16RTA , QRJ50Q16RTB , QRJ50Q16RTC , QRJ50Q18RTA , QRJ50Q18RTB , QRJ50Q18RTC , QRJ50Q20RTA , QRJ50Q20RTB , QRJ50Q20RTC , QRJ50QN14RTA , QRJ50QN14RTB , QRJ50QN14RTC ,3.00 QRJ50QN16RTA , QRJ50QN16RTB , QRJ50QN16RTC , QRJ50SX14RTA , QRJ50SX14RTB , QRJ50SX14RTC , QRJ50SX16RTA , QRJ50SX16RTB , QRJ50SX16RTC , TON QRJQ16RTA , QRJQ16RTB , QRJQ16RTC , QRJQ18RTA , QRJQ18RTB , QRJQ18RTC , QRJQ20RTA , QRJQ20RTB , QRJQ20RTC , QRJQN16RTA , QRJQN16RTB , QRJQN16RTC , QRJQN18RTA , QRJQN18RTB , QRJQN18RTC ,

18 C r a n e B l o c k s *DESIGN FACTOR 3:5 TO 1 Sheaves 60 TON Sheave Diameter QRJ60Q16RTA* , QRJ60Q16RTB* , QRJ60Q16RTC* , QRJ60Q18RTA* , QRJ60Q18RTB* , QRJ60Q18RTC* , QRJ6OQ20RTA * , QRJ60Q20RTS* , QRJ60Q20RTC* , QRJ60QN16RTA* , QRJ60QN16RTB* , QRJ60QN16RTC* , QRJ60QN18RTA * , QRJ60QN18RTB* , QRJ60QN18RTC* , TON QRJ65T18RTA , QRJ65T18RTB , QRJ65T18RTC , QRJ65T20RTA , QRJ65T20RTB , QRJ65T20RTC , QRJ65T24RTA , QRJ65T24RTB , QRJ65T24RTC , QRJ65QN16RTA , QRJ65QN16RTB , QRJ65QN16RTC , QRJ65QN18RTA , QRJ65QN18RTB , QRJ65QN18RTC , QRJ65SX16RTA , QRJ65SX16RTB , QRJ65SX16RTC , QRJ65SX18RTA , QRJ65SX18RTB , QRJ65SX18RTC , TON QRJ70Q16RTA ,5.00 QRJ70Q16RTB , QRJ70Q16RTC , *QRJ70Q18RTA , *QRJ70Q18RTB , *QRJ70Q18RTC , QRJ70Q20RTA , QRJ70Q20RTB , QRJ70Q20RTC , QRJ70QN16RTA , QRJ70QN16RTB , QRJ70QN16RTC , QRJ70QN18RTA , Sheaves Sheave Diameter QRJ70QN18RTB , QRJ70QN18RTC , QRJ70QN20RTA , QRJ70QN20RTB , QRJ70QN20RTC , QRJ70SX16RTA , QRJ70SX16RTB , QRJ70SX16RTC , QRJ70SX18RTA , QRJ70SX18RTB , QRJ70SX18RTC , TON QRJ75T18RTA , QRJ75T18RTB , QRJ75T18RTC , QRJ75T20RTA , QRJ75T20RTB , QRJ75T20RTC , QRJ75T24RTA , QRJ75T24RTB , QRJ75T24RTC , TON *QRJ80Q20RTA , *QRJ80Q20RTB , *QRJ80Q20RTC , QRJ80Q24RTA , QRJ80Q24RTB , QRJ80Q24RTC , QRJ80QN16RTA , QRJ80QN16RTB , QRJ80QN16RTC , QRJ80QN18RTA , QRJ80QN18RTB , QRJ80QN18RTC , QRJ80QN20RTA , QRJ80QN20RTB , QRJ80QN20RTC , QRJ80SX16RTA , QRJ80SX16RTB , QRJ80SX16RTC , QRJ80SX18RTA ,9.00 QRJ80SX18RTB , QRJ80SX18RTC , TON QRJ90QN20RTA , QRJ90QN20RTB , QRJ90QN20RTC , QRJ90QN24RTA , QRJ90QN24RTB , QRJ90QN24RTC , QRJ90SX18RTA , QRJ90SX18RTB ,

19 C r a n e B l o c k s Sheaves Sheave Diameter Sheaves Sheave Diameter QRJ90SX18RTC , QRJ90SX20RTA , QRJ90SX20RTB , QRJ90SX20RTC , TON QRJ100QN20RTA POA QRJ100QN20RTB POA QRJ100QN20RTC POA QRJ100QN24RTA POA QRJ100QN24RTB POA QRJ100QN24RTC POA QRJ100SX18RTA POA QRJ100SX18RTB POA QRJ100SX18RTC POA QRJ100SX20RTA POA QRJ100SX20RTB POA QRJ100SX20RTC POA QRJ100SV18RTA POA QRJ100SV18RTB POA QRJ100SV18RTC POA QRJ100SV20RTA POA QRJ100SV20RTB POA QRJ100SV20RTC POA QRJ100OCT18RTA POA QRJ100OCT18RTB POA QRJ100OCT18RTC POA QRJ100OCT20RTA POA QRJ1000CT20RTB POA QRJ100OCT20RTC POA 130 TON QRJ130SV18RTA POA QRJ130SV18RTB POA QRJ130SV18RTC POA 1 TON QRJ1SV18RTA POA QRJ1SV18RTB POA QRJ1SV18RTC POA QRJ1SV20RTA POA QRJ1SV20RTB POA QRJ1SV20RTC POA QRJ1NI18RTA POA QRJ1NI18RTB POA QRJ1NI18RTC POA QRJ1NI20RTA POA QRJ1NI20RTB POA QRJ1NI20RTC POA *DESIGN FACTOR 3:5 TO 1 17

20 S c r a p H a n d l i n g B l o c k The new Johnson Crane Block is designed for Scrap Handling applications,magnet and Dropball use. Available in sizes ranging from 15 to 30 tons. Sheave O.D.s ranging from 16 to 24 inches. Other Sheave O.D.s and tonnage capacities available upon request. Larger Sheave Hub and Bronze Bushing for extended block life. Swivel/Swing Hook with safety latch. Options Include: Swivel Tee and Shackle Assembly. Hook Anti-rotation Locking Device. Newly designed rope guides maintain the rope position. design factor 4 to 1 WORKING LOAD LIMIT (TONS) OF SHEAVES SHEAVE DIA. WEIGHT (LBS.) PART SJ15s16bta sj20s18bta sj25s20bta sj30s24bta

21 C r a n e B l o c k O p t i o n s Duplex hook weight adder (lbs.) adder weight adder (lbs.) adder POA POA POA POA SHACKLES FOR DUPLEX HOOK weight adder (lbs.) MATERIALS list price adder cast steel poa cast steel poa cast steel poa swivel tee and shackle assemblies weight adder (lbs.) weight adder (lbs.) 19 weight adder (lbs.) list price adder poa poa poa poa poa poa anti-rotation locking device number sheaves lock type weight (lbs.) adder screw up plunger up plunger up plunger up plunger up plunger up plunger sheave shrouds sheave diameter-in. number sheaves in block / list price adder

22 F i e l d M o d i f i c a t i o n K i t s cheek weight kit sheave diameter b weight kit c weight kit ab Standard material is cast iron. Steel cheek weight kits are available as an option for all crane block models. reeving guide kit sheave diameter kit list price / number sheaves in block POA POA POA POA POA POA POA POA heavy duty steel j-latch replacement kit crane block working load limit (tons) part number j-latch kit number weight (lbs.) hook part numbers jl / / jl / jl jl jl / jl / jl / jl / 12 / NOTE: J-Latches fit only Johnson hooks with a lock pin hole drilled through hook tip. For old style latch replacement, see below. heavy duty steel j-latch replacement kit crane block working load limit (tons) No. sheaves in block light duty latch HEAVY DUTY FLAPPER LATCH Kit No. list price Kit No. list price POA

23 F i e l d M o d i f i c a t i o n K i t s CRANE BLOCK J-LATCH KITS & PARTS J LATCH CASTING S RINGS SPRING G-PIN QR-PIN STEEL KIT INSTALL JL LENGTH : WIDTH 1.00 JL LENGTH 2.50 : WIDTH JL LENGTH 3.10 : WIDTH JL LENGTH 4.25 : 1.00 WIDTH 1.50 JL LENGTH 5.50 : WIDTH 1.67 JL LENGTH 5.54 : WIDTH 2.93 JL LENGTH WIDTH 4.35 JK LENGTH WIDTH 4.38 JL LENGTH : WIDTH 4.38 JL LENGTH : 1, WIDTH Johnson s exclusive J-Latch is a uniquely engineered hook latch system providing outstanding flexibility and durability. Its heavy-duty design incorporates a steel beam that positively engages a special recessed area in the hook tip. The removable two-position pin allows the J-Latch to function either as a locked bar or as an automatic spring latch. J-Latches meet OSHA requirements and are standard equipment on Johnson crane blocks through 165 ton capacity, all Johnson overhaul balls, and swivels. The J-Latch is also fered as an option on Johnson snatch blocks. NOTE: Correct rigging and operation practices are vitally important and are the responsibility the user to properly apply. The latch is not intended to support any live load nor overcome effects improper rigging or handling. 21

24 O v e r h a u l B a l l s Heavy Duty Steel J-latches are standard equipment on all overhaul balls models for every application Many standard models and configurations make it easy to match a Johnson overhaul ball to any crane. MIDGET OVERHAUL BALLS Swiveling and non-swiveling models in 3 and 5 ton capacities. Top performers that are short, husky and economical. SPLIT OVERHAUL BALLS Economical and convenient way to add downhaul weight. Split ball clamps to wire rope. johnson model number part number split ball weight (lbs.) wire rope size select one list price ob50 split /2 5/8 ob100 split /8 3/4 7/ overhaul ball assembly optional wedge socket assembly johnson model number working load limit (tons) part number list wt. price (lbs.) johnson model number wt. (lbs.) wire rope size * part number list price midget non-swiveling type 4 eye/hook ob ob ws-4 3 3/ ws-4 3 7/ ws-4 3 1/ ws / ws / ws / ws-6 9 5/ ws-6 9 3/ midget swiveling type 4 eye/hook ob3jem midget swiveling type 7 jaw/hook ws-4 3 3/ ws-4 3 7/ ws-4 3 1/ *select one ob3jjm old style latch replacement kits overhaul ball model light duty latch part no. list price Ob ob heavy duty latch part no. list price heavy duty steel j-latch replacement kits for current models overhaul ball model weight (lbs.) part no. j-latch kit number ob3 & jl 3-5 list price

25 O v e r h a u l B a l l s Bottom swivel-type 3 heavy duty steel j-latches are standard equipment on all overhaul balls high capacity and very compact wedge socket anchored at center ball Johnson ob3eh35-3 ws-5 1/ , ob3eh35-3 ws-5 9/ , ob3eh35-3 ws-5 5/ , ob3eh35-3 ws-6 5/ , ob3eh35-3 ws-6 3/ , ob3eh85-3 ws-5 1/ ,4.00 ob3eh85-3 ws-5 9/ ,4.00 ob3eh85-3 ws-5 5/ ,4.00 ob3eh85-3 ws-6 5/ , ob3eh85-3 ws-6 3/ , ob3eh150-3 ws-5 1/ , ob3eh150-3 ws-5 9/ , ob3eh150-3 ws-5 5/ , ob5eh35-3 ws-4 3/ , ob5eh35-3 ws-4 7/ , ob5eh35-3 ws-4 1/ , ob5eh35-3 ws-5 1/ , ob5eh35-3 ws-5 9/ , ob5eh35-3 ws-5 5/ , ob5eh35-3 ws-6 5/ , ob5eh35-3 ws-6 3/ , ob5eh85-3 ws-5 1/ , ob5eh85-3 ws-5 9/ , ob5eh85-3 ws-5 5/ , ob5eh85-3 ws-6 5/ , ob5eh85-3 ws-6 3/ , ob5eh85-3 ws-7 7/ , ob5eh85-3 ws , ob5eh150-3 ws-5 1/ , ob5eh150-3 ws-5 9/ , ob5eh150-3 ws-5 5/ , ob5eh150-3 ws-6 5/ , ob5eh150-3 ws-6 3/ , ob3eh150-3 ws-6 5/ , ob3eh150-3 ws-6 3/ , ob5eh150-3 ws-7 7/ , ob5eh150-3 ws , ob5eh200-3 ws-5 1/ , ob5eh200-3 ws-5 9/ , ob5eh200-3 ws-5 5/ , ob5eh200-3 ws-6 5/ , ob5eh200-3 ws-6 3/ , Johnson ob5eh200-3 ws-7 7/ , ob53h200-3 ws , ob7eh35-3 ws-5 1/ , ob7eh35-3 ws-5 9/ , ob7eh35-3 ws-5 5/ , ob7eh35-3 ws-6 5/ , ob7eh35-3 ws-6 3/ , ob7eh35-3 ws-7 7/ , ob7eh35-3 ws , ob7eh85-3 ws-5 1/ , ob7eh85-3 ws-5 9/ , ob7eh85-3 ws-5 5/ , ob7eh85-3 ws-6 5/ , ob7eh85-3 ws-6 3/ , ob7eh85-3 ws-7 7/ , ob7eh85-3 ws , ob7eh150-3 ws-5 1/ , ob7eh150-3 ws-5 9/ , ob7eh150-3 ws-5 5/ , ob7eh150-3 ws-6 5/ , ob7eh150-3 ws-6 3/ , ob7eh150-3 ws-7 7/ , ob7eh150-3 ws , ob7eh200-3 ws-5 1/ , ob7eh200-3 ws-5 9/ , ob7eh200-3 ws-5 5/ , ob7eh200-3 ws-6 5/ , ob7eh200-3 ws-6 3/ , ob7eh200-3 ws-7 7/ , ob7eh200-3 ws , ob9eh85-3 ws-5 1/ , ob9eh85-3 ws-5 9/ , ob9eh85-3 ws-5 5/ , ob9eh85-3 ws-6 5/ , ob9eh85-3 ws-6 3/ , ob9eh85-3 ws-7 7/ , ob9eh85-3 ws , ob9eh150-3 ws-5 1/ ,4.00 ob9eh150-3 ws-5 9/ ,4.00 ob9eh150-3 ws-5 5/ ,

26 O v e r h a u l B a l l s bottom swivel-type 3 Johnson ob9eh150-3 ws-6 5/ ob9eh150-3 ws-6 3/ ob9eh150-3 ws-7 7/ ob9eh150-3 ws ob9eh200-3 ws-5 1/ ob9eh200-3 ws-5 9/ ob9eh200-3 ws-5 5/ ob9eh200-3 ws-6 5/ ob9eh200-3 ws-6 3/ ob9eh200-3 ws-7 7/ ob9eh200-3 ws ob9eh350-3 ws-81 5/ ob9eh350-3 ws-8a 3/ ob9eh350-3 ws-8 7/ ob9eh350-3 ws ob12eh85-3 ws-5 1/ ob12eh85-3 ws-5 9/ ob12eh85-3 ws-5 5/ ob12eh85-3 ws-6 5/ ob12eh85-3 ws-6 3/ ob12eh85-3 ws-7 7/ ob12eh85-3 ws ob12eh150-3 ws-5 1/ ob12eh150-3 ws-5 9/ ob12eh150-3 ws-5 5/ ob12eh150-3 ws-6 5/ ob12eh150-3 ws-6 3/ ob12eh150-3 ws-7 7/ ob12eh150-3 ws ob12eh200-3 ws-5 1/ ob12eh200-3 ws-5 9/ ob12eh200-3 ws-5 5/ ob12eh200-3 ws-6 5/ ob12eh200-3 ws-6 3/ ob12eh200-3 ws-7 7/ ob12eh200-3 ws ob12eh350-3 ws-8a 5/ ob12eh350-3 ws-8a 3/ ob12eh350-3 ws-8 7/ ob12eh350-3 ws ob12eh350-3 ws / ob12eh350-3 ws10 1-1/ Johnson heavy duty steel j-latches are standard equipment on all overhaul balls ob12eh650-3 ws-8a 5/ ob12eh650-3 ws-8a 3/ ob12eh650-3 ws-8 7/ ob12eh650-3 ws ob12eh650-3 ws / ob12eh650-3 ws / ob12eh ws-8a 5/ ob12eh ws-8a 3/ ob12eh ws-8 7/ ob12eh ws ob12eh ws / ob12eh ws / ob15eh85-3 ws-5 1/ ob15eh85-3 ws-5 9/ ob15eh85-3 ws-5 5/ ob15eh85-3 ws-6 5/ ob15eh85-3 ws-6 3/ ob15eh85-3 ws-7 7/ ob15eh85-3 ws ob15eh150-3 ws-5 1/ ob15eh150-3 ws-5 5/ ob15eh150-3 ws-5 9/ ob15eh150-3 ws-6 5/ ob15eh150-3 ws-6 3/ ob15eh150-3 ws-7 7/ ob15eh150-3 ws ob15eh200-3 ws-5 1/ ob15eh200-3 ws-5 9/ ob15eh200-3 ws-5 5/ ob15eh200-3 ws-6 5/ ob15eh200-3 ws-6 3/ ob15eh200-3 ws-7 7/ ob15eh200-3 ws ob15eh350-3 ws-8a 5/ ob15eh350-3 ws-8a 3/ ob15eh350-3 ws-8 7/ ob15eh350-3 ws ob15eh350-3 ws / ob15eh350-3 ws / ob15eh650-3 ws-8a 5/ ob15eh650-3 ws-8a 3/ ob15eh650-3 ws-8 7/ ob15eh650-3 ws

27 O v e r h a u l B a l l s bottom swivel-type 3 Johnson ob15eh650-3 ws / , ob15eh650-3 ws / , ob15eh ws-8a 5/ , ob15eh ws-8a 3/ , ob15eh ws-8 7/ , ob15eh ws , ob15eh ws / , ob15eh ws / , ob20eh350-3 ws-8a 5/ , ob20eh350-3 ws-8a 3/ , ob20eh350-3 ws-8 7/ , ob20eh350-3 ws , ob20eh350-3 ws / , ob20eh350-3 ws / , ob20eh650-3 ws-8a 5/ , ob20eh650-3 ws-8a 3/ , ob20eh650-3 ws-8 7/ , ob20eh650-3 ws , ob20eh650-3 ws / , ob20eh650-3 ws / , ob20eh ws-8a 5/ , ob20eh ws-8a 3/ , ob20eh ws-8 7/ , ob20eh ws , ob20eh ws / , ob20eh ws / , Johnson heavy duty steel j-latches are standard equipment on all overhaul balls ob25eh350-3 ws-8 7/ , ob25eh350-3 ws , ob25eh350-3 ws / , ob25eh350-3 ws / , ob25eh650-3 ws-8 7/ , ob25eh650-3 ws , ob25eh650-3 ws / , ob25eh650-3 ws / , ob25eh ws-8 7/ , ob25eh ws , ob25eh ws / , ob25eh ws / , ob30eh650-3 ws-8 7/ ,4.00 ob30eh650-3 ws ,4.00 ob30eh650-3 ws / , ob30eh650-3 ws / , ob30eh ws-8 7/ , ob30eh ws , ob30eh ws / , ob30eh ws / , heavy duty steel j-latches replacement kits for current models overhaul ball model j-latch kit number 3eh jl eh jl eh jl eh jl eh jl eh jl eh jl eh jl eh jl overhaul ball model old style latch replacement kits light duty latch heavy duty latch 3eh eh eh eh eh eh eh

28 O v e r h a u l B a l l s top swivel-type 4 heavy duty steel j-latches are standard equipment on all overhaul balls ball and hook stability for easy handling only the swivel top turns with the wire rope johnson overhaul ball assembly No. working load limit (tons) weight (lbs.) ob4ee ob4ee ob4ee OB4EE OB4EE OB7EE ob7ee ob7ee ob7ee OB7EE ob12ee ob12ee ob12ee OB12EE ob12ee ob12ee OB12EE ob12ee ob12ee ob19ee wedge socket number optional wedge socket assembly wire rope size select one weight (lbs.) adder ws-4 3/8 or 7/16 or 1/ ws-5 1/2 or 9/16 or 5/ ws-6 5/8 or 3/ ws-4 3/8 or 7/16 or 1/ ws-5 1/2 or 9/16 or 5/ ws-6 5/8 or 3/ ws-4 3/8 or 7/16 or 1/ ws-5 1/2 or 9/16 or 5/ ws-6 5/8 or 3/ ws-4 3/8 or 7/16 or 1/ ws-5 1/2 or 9/16 or 5/ ws-6 5/8 or 3/ ws-4 3/8 or 7/16 or 1/ ws-5 1/2 or 9/16 or 5/ ws-6 5/8 or 3/ ws-4 3/8 or 7/16 or 1/ ws-5 1/2 or 9/16 or 5/ ws-6 5/8 or 3/ ws-4 3/8 or 7/16 or 1/ ws-5 1/2 or 9/16 or 5/ ws-6 5/8 or 3/ ws-4 3/8 or 7/16 or 1/ ws-5 1/2 or 9/16 or 5/ ws-6 5/8 or 3/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/

29 top swivel-type 4 heavy duty steel j-latches are standard equipment on all overhaul balls johnson overhaul ball assembly No. working load limit (tons) weight (lbs.) ob19ee ob19ee ob19ee OB19EE ob19ee ob19ee ob25ee OB25EE ob25ee ob25ee ob30ee ob30ee wedge socket number optional wedge socket assembly wire rope size select one weight (lbs.) adder ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-6 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-8a 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-8a 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-8a 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-8a 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ ws-8a 5/8 or 3/ ws-8 7/8 or ws /8 or 1-1/ heavy duty steel j-latches replacement kits for current models overhaul ball model j-latch kit number 4ee jl ee jl ee jl ee jl ee jl ee jl overhaul ball model old style hook latch replacement kits light duty latch heavy duty latch 4ee ee ee ee ee ee

30 TOP SWIVEL- WITH BK HOOK NON-SWIVEL OVERHAUL BALLS johnson overhaul ball assembly No. working load limit (tons) WITH BK HOOK weight (lbs.) johnson model numbers ob4ns ob4ns ob4ns ob4ns obk4ee obk4ee obk4ee obk4ee WITH BK HOOK obk7ee obk7ee obk7ee obk7ee WITH BK-18/22-10 HOOK obk12ee obk12ee obk12ee obk12ee obk12ee obk12ee obk12ee ob7ns ob7ns ob7ns ob7ns ob12ns ob12ns ob12ns OB12nS ob12ns ob12ns ob12ns ob19ns ob19ns ob19ns ob19ns ob19ns ob19ns ob25ns ob25ns ob25ns ob30ns ob30ns

31 S w i v e l s Compact design Roller thrust bearings Recessed grease fittings except midgets 4 to 1 design factor Forged steel hooks Precision machined Custom designs available key to swivel model numbers eye/hook jaw/hook Eye/eye 3 E h M working top fitting: bottom fitting: midget swivel limit tons e eye h hook j J jaw e eye j J jaw to order please specify model number heavy duty steel j-latches are standard equipment on all swivels with hooks model wt. part no. price model wt. part no. price model wt. part no. price 3ehm jhm eem eh jh ee eh jh ee eh jh ee eh jh ee eh jh ee eh jh ee eh eh eh jaw/eye Eye/jaw jaw/jaw 3jem ejm jjm je ej jj je ej jj je ej jj je ej jj model wt. part no. price model wt. part no. price model wt. part no. price heavy duty steel j-latch replacement kit for current models tons j-latch part number wt. list price 3-5 jl jl jl jl jl old style hook latch replacement kits tons light duty part no. list price heavy duty part no. list price

32 O p e n W e d g e S o c k e t standard headed pin with cotter. pin has charpy value 25 LBS./ft. at 4 F. easy to change out cast steel body; ductile iron wedge for specific wire rope size. body wedge & pin key to open wedge socket model numbers ws 6 3/4 wedge SOCKET BODy number wire rope (fs = federal wedge size specification) to order, please specify model & exact rope size example: ws-8 7/8 open wedge ws-6 3/4 open wedge 7/8 - wedge socket complete socket, less pin & only for ws-8 COTTERS SOCKET body each body adapts to two or more sizes wire rope. be sure correct wedge is used for wire rope size. when installing wire rope, always pre-load the wedge with wire rope in place. make allowance for the crimping effect common with all wedge sockets. it will reduce the working load limit the line by 20 percent (see www. gunnebojohnson.com for w.l.l. reduction by size, weight wire rope.) 100% mag inspected johnson model number wire rope weight (lbs.) body, pin and wedge complete no. list price body and wedge only no. wedge only WS-4 3/ WS-4 7/ WS-4 1/ WS-5 1/ WS-5 9/ WS-5 5/ WS-6 5/ WS-8A 5/ WS-6 3/ WS-8A 3/ WS-7 7/ WS-8 7/ WS WS WS / WS / WS / WS / FS /8 99 1, , FS /2 99 1, , no. Johnson Multi-Purpose Snatch Block 6 Ton 3.5 to 1 Design Factor 3/8 Wire Rope Anti-Corrosion Zinc Plated Fits over 2 Trailer Ball Model USB 6S4B # List Price G r e a t F o r O f f - R o a d! 30

33 TILT WALL BLOCKS - SHACKLE S PART NEW FROM GUNNEBO JOHNSON TILT WALL BLOCKS 30, & METRIC TON SIZES SHEAVE DIAMETERS 16" THROUGH 24" WIRE ROPE SIZES FROM 1" TO 2 1/4" SWIVEL SHACKLE & TAILBOARD S T i l t W a l l B l o c k s W.L.L. (METRIC TONS) WIRE ROPE SIZE SHEAVE O.D. WT 30 MT TW30S16TS TW30S16TS TW30S16TS TW30S16TS TW30S16TS TW30S20TS TW30S20TS TW30S20TS TW30S20TS TW30S20TS /8 1-1/4 1-3/8 1-1/ /8 1-1/4 1-3/8 1-1/ MT TWS18TS TWS18TS TWS18TS TWS18TS TWS18TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS /8 1-1/4 1-3/8 1-1/ /8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/ MT TWS20TS TWS20TS TWS20TS TWS20TS TWS20TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS TWS24TS /8 1-1/4 1-3/8 1-1/ /8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/ /

34 T i l t W a l l B l o c k s TILT WALL BLOCKS - TAILBOARD S PART W.L.L. (METRIC TONS) WIRE ROPE SIZE SHEAVE O.D. WT 30 MT TW30S16TT TW30S16TT TW30S16TT TW30S16TT TW30S16TT TW30S20TT TW30S20TT TW30S20TT TW30S20TT TW30S20TT /8 1-1/4 1-3/8 1-1/ /8 1-1/4 1-3/8 1-1/ MT TWS18TT TWS18TT TWS18TT TWS18TT TWS18TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT /8 1-1/4 1-3/8 1-1/ /8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/ MT TWS20TT TWS20TT TWS20TT TWS20TT TWS20TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT TWS24TT /8 1-1/4 1-3/8 1-1/ /8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/ /

35 O n e S h e a v e S n a t c h B l o c k s sheave bearing options bronze bushing standard optional roller bearings hook latches optional standard features rugged and reliable easy-open side plates 4 to 1 design factor METRIC RATED latches j-latch heavy duty Single sheave w/ hook Single sheave w/shackle Single sheave tailboard ONE SHEAVE SNATCH BLOCK W.L.L (METRIC TON) SHV OD WIRE ROPE (IN) PART NO SWIVEL HOOK SWIVEL HOOK W/LAT SWIVEL SHACKLE TAILBOARD (NO FITTING) WT (LBS.) PART NO. WT (LBS.) WT (LBS.) PART NO. WT (LBS.) PART NO. 2 MT 3 5/16-3/8 SB 2S 3B H SB 2S 3B S SB 2S 3B T MT 4 3/8-1/2 SB 4S 4B H SB 4S 4B S SB 4S 4B T /8-1/2 SB 4S 4R H SB 4S 4R S SB 4S 4R T /8-1/2 SB 4S 6B H SB 4S 6B S SB 4S 6B T /8-1/2 SB 4S 6R H SB 4S 6R S SB 4S 6R T /8-1/2 SB 4S 8B H SB 4S 8B S SB 4S 8B T /8-1/2 SB 4S 8R H SB 4S 8R S SB 4S 8R T /8-1/2 SB 4S 10B H SB 4S 10B S SB 4S 10B T /8-1/2 SB 4S 10R H SB 4S 10R S SB 4S 10R T /8-1/2 SB 4S 12B H SB 4S 12B S SB 4S 12B T /8-1/2 SB 4S 12R H SB 4S 12R S SB 4S 12R T /8-1/2 SB 4S 14B H SB 4S 14B S SB 4S 14B T /8-1/2 SB 4S 14R H SB 4S 14R S SB 4S 14R T MT 6 5/8-3/4 SB 8S 6B H SB 8S 6B S SB 8S 6B T /8-3/4 SB 8S 6R H SB 8S 6R S SB 8S 6R T /8-3/4 SB 8S 8B H SB 8S 8B S SB 8S 8B T /8-3/4 SB 8S 8R H SB 8S 8R S SB 8S 8R T /8-3/4 SB 8S 10B H SB 8S 10B S SB 8S 10B T /8-3/4 SB 8S 10R H SB 8S 10R S SB 8S 10R T /8-3/4 SB 8S 12B H SB 8S 12B S SB 8S 12B T /8-3/4 SB 8S 12R H SB 8S 12R S SB 8S 12R T /8-3/4 SB 8S 14B H SB 8S 14B S SB 8S 14B T /8-3/4 SB 8S 14R H SB 8S 14R S SB 8S 14R T

36 S n a t c h B l o c k s ONE SHEAVE SNATCH BLOCK W.L.L (METRIC TON) SWIVEL HOOK SWIVEL HOOK W/LAT SWIVEL SHACKLE TAILBOARD (NO FITTING) SHV OD WIRE ROPE (IN) PART NO WT (LBS.) PART NO. WT (LBS.) WT (LBS.) PART NO. WT (LBS.) PART NO. 12 MT 6 3/4-7/8 SB 12S 6B H SB 12S 6B S SB 12S 6B T /4-7/8 SB 12S 6R H SB 12S 6R S SB 12S 6R T /4-7/8 SB 12S 8B H SB 12S 8B S SB 12S 8B T /4-7/8 SB 12S 8R H SB 12S 8R S SB 12S 8R T /4-7/8 SB 12S 10B H SB 12S 10B S SB 12S 10B T /4-7/8 SB 12S 10R H SB 12S 10R S SB 12S 10R T /4-7/8 SB 12S 12B H SB 12S 12B S SB 12S 12B T /4-7/8 SB 12S 12R H SB 12S 12R S SB 12S 12R T /4-7/8 SB 12S 14B H SB 12S 14B S SB 12S 14B T /4-7/8 SB 12S 14R H SB 12S 14R S SB 12S 14R T /4-7/8 SB 12S 16B H SB 12S 16B S SB 12S 16B T /4-7/8 SB 12S 16R H SB 12S 16R S SB 12S 16R T MT 8 3/4-7/8 SB 15S 8B H SB 15S 8B S SB 15S 8B T /4-7/8 SB 15S 8R H SB 15S 8R S SB 15S 8R T /4-7/8 SB 15S 10B H SB 15S 10B S SB 15S 10B T /4-7/8 SB 15S 10R H SB 15S 10R S SB 15S 10R T /4-7/8 SB 15S 12B H SB 15S 12B S SB 15S 12B T /4-7/8 SB 15S 12R H SB 15S 12R S SB 15S 12R T /4-7/8 SB 15S 14B H SB 15S 14B S SB 15S 14B T /4-7/8 SB 15S 14R H SB 15S 14R S SB 15S 14R T /4-7/8 SB 15S 16B H SB 15S 16B S SB 15S 16B T /4-7/8 SB 15S 16R H SB 15S 16R S SB 15S 16R T MT /8 SB 20S 8B H SB 20S 8B S SB 20S 8B T /8 SB 20S 8R H SB 20S 8R S SB 20S 8R T /8 SB 20S 10B H SB 20S 10B S SB 20S 10B T /8 SB 20S 10R H SB 20S 10R S SB 20S 10R T /8 SB 20S 12B H SB 20S 12B S SB 20S 12B T /8 SB 20S 12R H SB 20S 12R S SB 20S 12R T /8 SB 20S 14B H SB 20S 14B S SB 20S 14B T /8 SB 20S 14R H SB 20S 14R S SB 20S 14R T /8 SB 20S 16B H SB 20S 16B S SB 20S 16B T /8 SB 20S 16R H SB 20S 16R S SB 20S 16R T /8 SB 20S 18B H SB 20S 18B S SB 20S 18B T /8 SB 20S 18R H SB 20S 18R S SB 20S 18R T MT /8-1 1/4 SB 30S 20B H SB 30S 20B S SB 30S 20B T /8-1 1/4 SB 30S 20R H SB 30S 20R S SB 30S 20R T /8-1 1/4 SB 30S 24B H SB 30S 24B S SB 30S 24B T /8-1 1/4 SB 30S 24R H SB 30S 24R S SB 30S 24R T

37 S n a t c h B l o c k s TOP DEAD-END SINGLE SHEAVE SNATCH BLOCK Top Dead-end With Shackle Top Dead-end With Hook W.L.L (METRIC TON) SWIVEL HOOK SWIVEL HOOK W/LAT WITH SWIVEL SHACKLE SHV OD WIRE ROPE (IN) PART NO WT (LBS.) PART NO. WT (LBS.) WT (LBS.) PART NO. 4 MT 4 3/8-1/2 TD 4S 4B H TD 4S 4B S /8-1/2 TD 4S 4R H TD 4S 4R S /8-1/2 TD 4S 6B H TD 4S 6B S /8-1/2 TD 4S 6R H TD 4S 6R S /8-1/2 TD 4S 8B H TD 4S 8B S /8-1/2 TD 4S 8R H TD 4S 8R S MT 6 5/8-3/4 TD 8S 6B H TD 8S 6B S /8-3/4 TD 8S 6R H TD 8S 6R S /8-3/4 TD 8S 8B H TD 8S 8B S /8-3/4 TD 8S 8R H TD 8S 8R S /8-3/4 TD 8S 10B H TD 8S 10B S /8-3/4 TD 8S 10R H TD 8S 10R S /8-3/4 TD 8S 12B H TD 8S 12B S /8-3/4 TD 8S 12R H TD 8S 12R S /8-3/4 TD 8S 14B H TD 8S 14B S /8-3/4 TD 8S 14R H TD 8S 14R S MT 6 3/4-7/8 TD 12S 6B H TD 12S 6B S /4-7/8 TD 12S 6R H TD 12S 6R S /4-7/8 TD 12S 8B H TD 12S 8B S /4-7/8 TD 12S 8R H TD 12S 8R S /4-7/8 TD 12S 10B H TD 12S 10B S /4-7/8 TD 12S 10R H TD 12S 10R S /4-7/8 TD 12S 12B H TD 12S 12B S /4-7/8 TD 12S 12R H TD 12S 12R S /4-7/8 TD 12S 14B H TD 12S 14B S /4-7/8 TD 12S 14R H TD 12S 14R S MT 8 3/4-7/8 TD 15S 8B H TD 15S 8B S /4-7/8 TD 15S 8R H TD 15S 8R S /4-7/8 TD 15S 10B H TD 15S 10B S /4-7/8 TD 15S 10R H TD 15S 10R S /4-7/8 TD 15S 12B H TD 15S 12B S /4-7/8 TD 15S 12R H TD 15S 12R S /4-7/8 TD 15S 14B H TD 15S 14B S /4-7/8 TD 15S 14R H TD 15S 14R S MT /8 TD 20S 14B H TD 20S 14B S /8 TD 20S 14R H TD 20S 14R S

38 S n a t c h B l o c k s DOUBLE SHEAVE SNATCH BLOCK Two Sheave With Hook Two Sheave With Shackle W.L.L (METRIC TON) SWIVEL HOOK SWIVEL HOOK W/LAT WITH SWIVEL SHACKLE SHV OD WIRE ROPE (IN) PART NO WT (LBS.) PART NO. WT (LBS.) WT (LBS.) PART NO. 8 MT 4 3/8-1/2 DB 8D 4B H DB 8D 4B S /8-1/2 DB 8D 4R H DB 8D 4R S /8-1/2 DB 8D 6B H DB 8D 6B S /8-1/2 DB 8D 6R H DB 8D 6R S MT 6 5/8-3/4 DB 12D 6B H DB 12D 6B S /8-3/4 DB 12D 6R H DB 12D 6R S /8-3/4 DB 12D 8B H DB 12D 8B S /8-3/4 DB 12D 8R H DB 12D 8R S /8-3/4 DB 12D 10B H DB 12D 10B S /8-3/4 DB 12D 10R H DB 12D 10R S /8-3/4 DB 12D 12B H DB 12D 12B S /8-3/4 DB 12D 12R H DB 12D 12R S /8-3/4 DB 12D 14B H DB 12D 14B S /8-3/4 DB 12D 14R H DB 12D 14R S MT 6 5/8-3/4 DB 15D 6B H DB 15D 6B S /8-3/4 DB 15D 6R H DB 15D 6R S /4-7/8 DB 15D 8B H DB 15D 8B S /4-7/8 DB 15D 8R H DB 15D 8R S /4-7/8 DB 15D 10B H DB 15D 10B S /4-7/8 DB 15D 10R H DB 15D 10R S /4-7/8 DB 15D 12B H DB 15D 12B S /4-7/8 DB 15D 12R H DB 15D 12R S /4-7/8 DB 15D 14B H DB 15D 14B S /4-7/8 DB 15D 14R H DB 15D 14R S MT /8 DB 20D 8B H DB 20D 8B S /8 DB 20D 8R H DB 20D 8R S /8 DB 20D 10B H DB 20D 10B S /8 DB 20D 10R H DB 20D 10R S /8 DB 20D 12B H DB 20D 12B S /8 DB 20D 12R H DB 20D 12R S /8 DB 20D 14B H DB 20D 14B S /8 DB 20D 14R H DB 20D 14R S

39 S n a t c h B l o c k O p t i o n s heavy duty steel j-latch optional on current models snatch block swl (METRIC tons) LATCH NO. LATCH PART NO. list price 2 JL & 4 jl jl jl jl J Latch Casting s Rngs Spring G-pin QR-PIN STEEL KIT INSTALL JL LENGTH list: WIDTH 1.00 JL LENGTH 2.50 list: WIDTH JL LENGTH 3.10 list: WIDTH JL LENGTH 4.25 list: WIDTH 1.50 JL LENGTH 5.50 list: WIDTH 1.67 JL LENGTH 5.54 list: WIDTH 2.93 JL LENGTH 6.50 list: WIDTH 4.35 JL LENGTH 7.88 list: WIDTH 4.38 JL LENGTH list: WIDTH 4.38 old style replacement latches not for current models snatch block swl (METRIC tons) part NO. light duty latch list price part no heavy duty latch list price LIGHT DUTY LATCH HEAVY DUTY LATCH 37

40 TM MANHANDLER Derrick Blocks Derrick Snatch Block For Overhead Hoisting Applications WLL 4T 12T 12T MHSB4S8TS MHSB12S10TS MHSB12S14TS Galvanized Coating Standard WIRE ROPE 3/8-1/2 1/2-9/16 5/8-3/4 SHEAVE DIAMETER PART WT (LBS) Personnel Lifting Snatch Block Tether Style Backup Securing System WLL 1500 LBS MHSB1S8RS WIRE ROPE 3/8-7/16 SHEAVE DIAMETER 8 PART WT (LBS) Two additional attachment points for secondary tether connection, backup securing system. Read and understand recommended attachment data and applicable regulations prior to use. For The Oil and Gas Industry Exclusive Ring-Guard design retains internal parts in case failure. Sealed, tapered roller bearings, no periodic lubrication needed. Heavy duty, with forged, high strength alloy steel yokes, swivels, tees and shackles, quenched and tempered. R-pin retainers prevent inadvertent opening latch pins, when properly in place. No extra, cumbersome outside bolts to undo or lose when opening the block. Quality you can depend on from Gunnebo Johnson, an API Q1 and ISO 9001 certified manufacturing center. 38

41 hf 1 s 4 r h mr product type hf = hay fork pulley tl = TONG line block ld = laydown block swl tons number sheaves: s = 1 sheave o.d. inches bearing type b bronze brushed r roller bearing fitting type e = eye h = hook rope size hay fork pulley only mr = 1-1/4 manilla rope wr = 1/2 O i l F i e l d B l o c k s GL = GUYLINE block * specify model number * wire rope size (other than standard) GUYLINE BLOCKS METRIC RATED AVAILABLE IN BOTH SINGLE AND DOUBLE SHEAVE model no. SINGLE SHEAVE std rope wt. (lbs.) part number GL 5S6 1/ GL 7.5S6 5/ TO 1 DESIGN FACTOR DOUBLE SHEAVE model no. std rope wt. (lbs.) part number GL 10D6 1/ GL 15D6 5/ hay fork pulley US TONS light weight rugged and reliable eye fitting model no. std wt. rope (lbs.) part number hf1s4be-mr 1 1-1/ hf1s4re-mr 1 1-1/ hf1s4be-wr 3/8 1/ hf1s4re-wr 3/8 1/ TONG LINE BLOCKS to 1 design factor bronze bushing and roller bearing models hook fitting model no. std wt. rope (lbs.) part number hf1s4bh-mr 1 1-1/ hf1s4rh-mr 1 1-1/ hf1s4bh-wr 3/8 1/ hf1s4rh-wr 3/8 1/ LAYDOWN BLOCKS METRIC RATED easy-open side plate 4 to 1 design factor BRONze bushing and roller bearing models W.L.L (METRIC TON) WITH SWIVEL EYE SHV OD WIRE ROPE (IN) WT (LBS.) PART NO 2.8 MT 6 1/2-5/8 TL 2.8S 6B E /2-5/8 TL 2.8S 6R E /2-5/8 TL 2.8S 8B E /2-5/8 TL 2.8S 8R E /2-5/8 TL 2.8S 10B E /2-5/8 TL 2.8S 10R E /2-5/8 TL 2.8S 12B E /2-5/8 TL 2.8S 12R E METRIC RATED easy-open side plate 4 to 1 design factor BRONze bushing and roller bearing models W.L.L (METRIC TON) WITH SWIVEL EYE & HOOK SHV OD WIRE ROPE (IN) WT (LBS.) PART NO 1 MT 6 1/2-5/8 LD 1S 6B H /2-5/8 LD 1S 6R H /2-5/8 LD 1S 8B H /2-5/8 LD 1S 8R H

42 F i x e d B a i l C o n s t r u c t i o n & M a r i n e R i g g i n g B l o c k s standard features Top dead-end shackle standard on all models. Full coverage side plates and center plates to extend beyond sheave rims to deflect damaging side blows. Center plates between every sheave to prevent rope skip. Direct bearing lubrication through center pin channels. All components are field replaceable. Exclusive ForgeFab sheaves (16 O.D. and larger) have smooth flamehardened grooves that promote slow, even wear. key to bail block model numbers B bail block 45 working load limit tons to order please SPECify: model no. wire rope size q number sheaves: s=1 d-2 t-3 q-4 qn-5 sx-6 14 sheave size nom. o.d. T TAPERED roller bearing johnson model number wll tons shv dia. wt (lbs.) ONE SHEAVE TAPERED roller bearing part no. TAPERED roller bearing list price b10s8-t b10s10-t b15s10-t b10s12-t b15s12-t b10s14-t b15s14-t b30s14-t b20s16-t b30s16-t b35s16-t POA b20s18-t b30s18-t b35s18-t POA b20s20-t b30s20-t b35s20-t POA b45s20-t POA b30s24-t b35s24-t POA b45s24-t POA johnson model number wll tons shv dia. wt (lbs.) TWO SHEAVE TAPERED roller bearing part no. TAPERED roller bearing list price b10d8-t b10d10-t b15d10-t b20d10-t b10d12-t b15d12-t b20d12-t b30d12-t b10d14-t b15d14-t b20d14-t b30d14-t b35d14-t POA b20d16-t b30d16-t b35d16-t POA b45d16-t b30d18-t b35d18-t POA b45d18-t b35d20-t b45d20-t bd20-t b45d24-t bd24-t POA

43 F i x e d B a i l C o n s t r u c t i o n & M a r i n e R i g g i n g B l o c k s standard Tapered roller bearings for high RPM service. custom designs High capacity, custom engineered blocks available on request. special request options: Diamond pattern side plates Bronze bushings Fully galvanized johnson model number wll tons shv dia. wt (lbs.) three sheaves TAPERED roller bearing part no. TAPERED roller bearing list price b10t8-t b15t8-t b10t10-t b15t10-t b20t10-t b30t10-t b15t12-t b20t12-t b30t12-t b35t12-t b15t14-t b20t14-t b30t14-t b35t14-t b45t14-t b30t16-t b35t16-t b45t16-t b45t18-t bt18-t b65t18-t b45t20-t bt20-t b65t20-t bt24-t b65t24-t johnson model number wll tons shv dia. wt (lbs.) TAPERED roller bearing part no. TAPERED roller bearing list price b15q8-t b20q8-t b15q10-t b20q10-t b30q10-t b35q10-t b15q12-t b20q12-t b30q12-t b35q12-t POA b45q12-t b15q14-t b20q14-t b30q14-t b35q14-t POA b45q14-t b35q16-t POA b45q16-t bq16-t POA b45q18-t POA b65q18-t b65q20-t POA b75q20-t b95q24-t POA five sheaves b100qn20-t POA b115qn24-t POA six sheaves b125sx20-t POA b135sx24-t POA 41

44 Gunnebo Johnson Corp.: The Only Way to Get ForgeFab Sheaves Johnson ForgeFab sheaves are available in sizes ranging from 12 to 72 inches, with over 250 standard models. For sheave diameters between 3 to 12, Johnson fers cast steel, cast iron, and ductile iron sheaves. Bronze bushings, roller bearings, and tapered bearings are available in all sizes. With many thousands in use, Johnson Wire Rope Sheaves are industry proven. Cost efficient designs are available with no up-front tooling or pattern charges, and no premium for small order quantities. ForgeFab sheaves have flame-hardened, precision grooves for slow, even wear and long rope life. The integrity Johnson s single disc forged steel construction provides a sheave with superior strength. 42

45 W i r e R o p e S h e a v e s 1/4 through 2-1/4-inch Wire Rope Sizes 4 to 1 Design Factor 3 through 72-Inch Diameters (larger on request) Flame-Hardened Grooves, Size 16 inches and Larger Bronze Bushed Roller Bearing Without Inner Race Roller Bearing With Inner Race Tapered Roller Bearing nominal wire rope size inches minimum johnson blocks sheave o.d. requirements as comply with ansi and cmaa standards Accompanying chart shows which Johnson sheaves generally comply with ANSI or CMAA Standards. Consult Factory for specific applications. Translating P. D. ratios in terms the closest appropriate outside diameters, the list ranges from an 8 inch hoisting block sheave to a 48 inch overhead crane block sheave. How Sheave Size Affects Wire Rope Strength Severe bending is a major cause short rope life. By contrast the larger the sheave diameters, the less wear on the rope and greater its strength efficiency. 16 to 1 P.D. ratio required for hoisting blocks by ANSI B30.5 (Crawler, Locomotive and Truck Cranes) and ANSI B30.15 (Mobile Hydraulic Cranes). ANSI B30.5 is required by OSHA regulations as printed in Federal Register on June 24 and 27, ansi b30.5* ansi b30.15* Hoisting blocks inches CMAA overhead crane blocks inches 7/ / / / / / / / / / / / / * 24 to 1 P.D. ratio required for running sheaves with 6 x 37 rope by CMAA Specification No. 70 (Electric Overhead Traveling Cranes). 43

46 F i n i s h B o r e d S h e a v e s Grease fitting on sheave hub available on request 4-1/2 x A nominal o.d. No. material * weight (lbs.) wire rope size min max f hub bore c.i.9 3/8 3/8.875/ s /4 7/16.875/ s /4 5/8 1.12/ / d.i /2 3/ / / d.i mr 1-1/4mr 1.250/ / d.i /16 3/ / d.i /16 5/ / d.i / / d.i / / d.i / / d.i. 8 3/8 1-1/ / d.i /8 3/ / d.i /4 3/ / d.i /4 3/ / d.i /8 7/ / d.i / / d.i. 15 1/2 1-1/ / d.i /2 1-1/ / c.s. 17 1/2 1-1/ / c.s. 17 1/2 1-1/ / d.i. 10 3/8 3/ / d.i. 10 1/4 3/ / d.i. 12 5/16 3/ / d.i /16 3/ / d.i /2 1-1/ / d.i /2 1-1/ / d.i /2 1-1/ / d.i /2 1-1/ / c.s. 31 1/2 1-1/ / c.s. 30 3/8 1-1/ / d.i. 22 3/8 7/ / d.i. 19 3/8 7/ / d.i. 16 3/ / d.i. 18 3/ / d.i. 17 3/8 7/ / d.i /2 1-1/ / d.i. 23 1/2 1-1/ / d.i. 23 1/2 1-1/ / d.i /2 1-1/ / c.s /2 1-3/ / c.s. 24 7/16 1-1/ / c.s. 15 3/8 3/ / c.s. 24 3/ / c.s. 14 3/8 9/ / c.s. 23 7/ / F.F /2 1-1/ / F.F /2 1-1/ / F.F. 34 1/2 1-1/ / F.F. 35 1/2 1-1/ / c.s. 29 1/2 1-3/ / c.s. 28 1/2 1-3/ / c.s. 44 1/2 1-1/ / c.s. 49 5/8 1-1/ / * material c.i. = cast iron d.i. = ductile iron, c.s. = cast steel f.f. = forgefab S. = STEEL 44 g hub width t hub o.d. b web thick. List Price

47 F i n i s h B o r e d S h e a v e s Grease fitting on sheave hub available on request 4-1/2 x A nominal o.d. No. material * weight (lbs.) wire rope size min max f hub bore g hub width t hub o.d. b web thick. List Price F.F. 46 1/2 3/ / F.F. 49 1/2 3/ / F.F. 48 1/2 3/ / F.F. 48 1/2 1-1/ / F.F. 48 1/2 1-1/ / F.F. 47 1/2 1-1/ / F.F. 47 1/2 1-1/ / F.F. 46 1/2 1-1/ / F.F. 47 1/2 1-1/ / F.F. 47 1/2 1-1/ / F.F. 61 1/2 3/ / F.F. 59 1/2 3/ / , F.F. 59 1/2 1-1/ / , F.F. 59 1/2 1-1/ / , F.F. 61 1/2 1-1/ / , F.F. 59 1/2 1-1/ / , F.F. 58 1/2 1-1/ / , F.F. 59 1/2 1-1/ / , F.F. 61 1/2 1-1/ / , F.F. 73 1/2 1-1/ / , F.F. 72 1/2 1-1/ / , F.F. 74 1/2 1-1/ / , F.F. 72 1/2 1-1/ / , F.F. 72 1/2 1-1/ / , F.F. 73 1/2 1-1/ / , F.F. 75 5/8 1-1/ / , F.F. 74 1/2 1-1/ / , F.F /8 1-1/ / , F.F /8 1-1/ / , F.F /8 1-1/ / , F.F /8 1-1/ / , F.F /8 1-1/ / , F.F /8 1-1/ / , F.F /8 1-1/ / , F.F /8 1-1/ / , F.F /8 1-1/ / , F.F /8 1-1/ / POA F.F /8 1-1/ / POA F.F /8 1-1/ / POA F.F /8 1-1/ / POA F.F /8 1-3/ / POA F.F / / POA F.F /4 1-1/ / POA F.F /8 1-3/ / POA F.F /8 1-3/ / POA F.F /4 1-3/ / POA F.F /8 1-1/ / POA F.F / / POA F.F / / POA F.F / / POA F.F / / POA F.F /8 2-1/ / POA F.F /8 2-1/ / POA * material f.f. = forgefab 54 and larger diameters available on request 45

48 B r o n z e B u s h e d S h e a v e s Grease fitting on sheave hub available on request 4-1/2 x through 14-inch Sheaves: Rim width (not shown) allows for adequate running clearance to order, please specify: nominal sheave o.d., model number, wire rope size A nominal o.d. johnson model number No. material * weight (lbs) wire rope size min max e shaft size g hub width t hub o.d. b web thick. List Price c.i. 1 3/8 3/ m s /4 7/ m s. 2 1/4 5/ /4 hfwr d.i. 2 1/2 3/ /4 hfmr d.i. 2 1mr 1-1/4mr / d.i. 2 1/4 3/ wl-61-b d.i. 4 1/4 1/ d.i. 6 1/4 3/ d.i. 6 3/ d.i. 6 3/ d.i. 8 1/2 1-1/ d.i. 7 3/8 3/ wl-81-a d.i. 7 3/8 3/ wl-81-b d.i. 7 1/4 3/ d.i. 11 3/8 7/ d.i. 11 3/ d.i. 16 1/2 1-1/ c.s. 18 1/2 1-1/ c.s. 18 1/2 1-1/ d.i. 13 3/8 3/ d.i. 13 1/4 3/ d.i. 13 5/16 3/ d.i. 21 1/2 1-1/ d.i. 21 1/2 1-1/ c.s. 31 1/2 1-1/ c.s. 30 3/8 1-1/ d.i. 19 3/8 7/ d.i. 19 3/8 7/ d.i. 19 3/8 7/ d.i. 19 3/8 7/ d.i. 28 1/2 1-1/ d.i. 28 1/2 1-1/ c.s. 26 1/2 1-1/ c.s. 26 1/2 1-3/ c.s. 15 3/8 3/ c.s. 24 1/2 7/ c.s. 24 3/ F.F. 36 1/2 1-1/ F.F. 36 1/2 1-1/ c.s. 29 1/2 1-3/ c.s. 28 1/2 1-3/ c.s. 49 3/4 1-1/ , * material c.i. = cast iron, d.i. = ductile iron, s. = steel, c.s. = cast steel, F.F. = FORGEFAB 46

49 B r o n z e B u s h e d S h e a v e s Grease fitting on sheave hub available on request 4-1/2 x through 14-inch Sheaves: Rim width (not shown) allows for adequate running clearance to order, please specify: nominal sheave o.d., model number, wire rope size A nominal o.d. johnson model number No. material * weight (lbs) wire rope size min max e shaft size g hub width t hub o.d. b web thick. List Price f.f. 47 1/2 3/ f.f. 50 1/2 3/ f.f. 50 1/2 1-1/ f.f. 50 1/2 1-1/ f.f. 49 1/2 1-1/ , f.f. 50 1/2 1-1/ , f.f. 62 1/2 3/ f.f. 60 1/2 1-1/ , f.f 63 1/2 1-1/ , f.f. 68 5/8 1-1/ , f.f. 75 1/2 1-1/ , f.f. 76 1/2 1-1/ , f.f. 82 5/8 1-1/ , f.f /8 1-1/ , f.f /8 1-1/ , f.f /8 1-1/ , f.f /8 1-1/ , f.f /8 1-1/ POA f.f /8 1-1/ POA f.f /8 1-3/ POA f.f /4 1-1/ POA f.f /8 1-3/ POA f.f /4 1-1/ POA f.f / POA f.f / POA f.f / POA * Material f.f. = forgefab 54 and larger diameters available upon request 47

50 R o l l e r B e a r i n g S h e a v e s W i t h I n n e r R a c e Grease fitting on sheave hub available on request 4-1/2 x through 14-inch Sheaves: Rim width (not shown) allows for adequate running clearance to order, please specify: nominal sheave o.d., model number, wire rope size A nominal o.d. johnson model number No. material * weight (lbs) wire rope size min max e shaft size g hub width t hub o.d. b web thick. List Price 6 6-5a 4522 d.i. 9 3/ a 4523 c.s. 10 1/2 1-/ a 4524 d.i. 12 3/8 7/ a 4525 d.i. 17 1/2 1-1/ a 4526 c.s. 21 1/2 1-1/ a 4527 d.i. 13 1/4 3/ a 4528 d.i. 13 5/16 3/ a 4529 d.i. 23 1/2 1-1/ a c.s. 34 3/8 1-1/ a d.i. 22 3/8 7/ a d.i. 22 3/8 7/ a d.i. 28 1/2 1-1/ a c.s. 28 7/16 1-1/ a c.s. 17 3/8 3/ a c.s. 25 7/ a F.F. 38 1/2 1-1/ a c.s. 32 1/2 1-3/ , a c.s. 51 3/4 1-1/ , a f.f. 51 1/2 3/ , a f.f. 52 1/2 1-1/ , a f.f. 52 1/2 1-1/ , a f.f. 65 1/2 1-1/ , a f.f. 71 1/2 1-1/ , a f.f. 79 1/2 1-1/ , a f.f. 85 1/2 1-1/ , a ff 109 5i 1-1/ , a f.f /8 1-1/ , a f.f /8 1-1/ POA a f.f /8 1-3/ POA a 79 f.f /8 1-3/ POA * Material D.I. = DUCTILE IRON, f.f. = forgefab, C.S. = CAST STEEL 36 and larger diameters available upon request 48

51 R o l l e r B e a r i n g S h e a v e s W i t h o u t I n n e r R a c e Grease fitting on sheave hub available on request 4-1/2 x /4 through 14-inch Sheaves: Rim width (not shown) allows for adequate running clearance to order please specify: nominal sheave o.d., model number, wire rope size A nominal o.d. johnson model number No. material * weight (lbs) wire rope size min max e shaft size g hub width t hub o.d. b web thick. List Price 4-1/4 hfwr d.i. 2 1/4 3/ /4 hfmr d.i. 2 1mr 1-1/4mr /2 4-3c d.i. 2 1/4 3/ c d.i. 6 1/4 3/ c d.i. 7 3/8 3/ c d.i. 21 1/2 1-1/ d d.i. 22 1/2 1-1/ c d.i. 19 3/8 3/ c d.i. 24 1/2 1-1/ d d.i. 25 1/2 1-1/ c F.F. 47 1/2 1-1/ d F.F. 37 1/2 1-1/ c f.f. 50 1/2 3/ c f.f. 50 1/2 1-1/ d f.f. 51 1/2 1-1/ , d f.f. 62 1/2 3/ , c f.f. 62 1/2 1-1/ , d f.f. 63 1/2 1-1/ , c 80 f.f. 67 1/2 1-1/ , d 81 f.f. 72 1/2 1-1/ , c f.f. 75 1/2 1-1/ , d f.f. 76 1/2 1-1/ , c 82 f.f. 81 1/2 1-1/ , d 83 f.f. 85 1/2 1-1/ , c f.f /8 1-1/ , d f.f /8 1-1/ , c f.f /8 1-1/ , d f.f /8 1-1/ , c 84 f.f /8 1-1/ POA d 85 f.f /8 1-1/ POA c 86 f.f /8 1-3/ POA d 87 f.f / POA c 88 f.f /8 1-3/ POA d 89 f.f /8 1-3/ POA * Material D.i. = DUCTILE IRON, f.f. = FORGEFAB 36 and larger diameters available upon request 49

52 T a p e r e d R o l l e r B e a r i n g S h e a v e s Grease fitting on sheave hub available on request 4-1/2 x through 14-inch Sheaves: Rim width (not shown) allows for adequate running clearance to order, please specify: nominal sheave o.d., model number, wire rope size A nominal o.d. johnson model number No. material * weight (lbs) wire rope size min max e shaft size g hub width t hub o.d. b web thick. List Price t c.s. 33 1/2 1-1/ t c.s. 28 1/2 1-1/ , t c.s. 33 1/2 1-3/ , t f.f. 52 1/2 3/ , t 4522 f.f. 64 1/2 7/ , tm f.f. 66 5/8 1-1/ , t f.f. 71 5/8 1-1/ , t f.f. 80 1/2 7/ , tm f.f. 82 5/8 1-1/ , t f.f. 86 5/8 1-1/ , t f.f /8 7/ , tm f.f /8 1-1/ , t 4166 f.f /8 1-1/ POA t f.f /8 1-1/ POA t f.f /8 1-1/ POA t 4167 f.f /8 1-1/ POA t f.f / POA t f.f /4 1-1/ POA t 4168 f.f /8 1-3/ POA t f.f /4 1-5/ POA t 4169 f.f / POA t f.f / POA t f.f / POA t 4170 f.f / POA T f.f /8 2-1/ POA ta f.f /8 2-1/ POA * Material c.s. = cast steel, f.f. = FORGEFAB 54 and larger diameters available upon request 50

53 SUMMARY OF COMMON CONVERSIONS FACTORS If you know: Multiply by: To find: inches 25.4 millimeters (mm) inches 2.54 centimeters (cm) feet 0.30 meters (m) yards meters (m) miles 1.61 kilometers (km) millimeters.0394 inches centimeters.39 inches meters 3.28 feet meters 1.09 yards kilometers.62 miles metric tons u.s. tons U.S. tons.9072 metric tons kilograms pounds pounds.453 kilograms metric tons pounds metric tons kilograms Fahrenheit (temp.) 5/9 (after subtracting 32) Celsius (temp.) Celsius (temp.) 9/5 (then add 32) Fahrenheit (temp.) DECIMAL/METRIC EQUIVALENT TABLE FRACTION DECIMAL METRIC (MM.) 1/ / / / / / / / / / / / / / / Johnson DVD PT #

54 JOHNSON DISPLAY RACK Take advantage this unique sales tool No One Display Rack per Location Remember...Out Sight, Out Mind Assorted combination snatch blocks, wedge sockets, swivels and overhaul balls Dimensions 2 W x 4 L x 4 H FREE Support from Johnson with 3,000 net order Conveniently store blocks, swivels, and overhaul balls. Remind customers supplementary items ten overlooked. Stimulate impulse purchases. (800) Attractive. Sturdy. Requires little floor space. Unit arrives pre-assembled, ready for display. 52