P627 HIGH FLOW GAS REGULATOR

Transcription

1 Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility CE Construction Available The P627 is a spring loaded, direct-operated regulator for both low and high pressure applications in the oil and gas industries. These regulators provide durability, from the powder-coated epoxy exterior finish, as well as installation versatility, from the multiposition body and spring case configurations. These regulators are also available in an external pressure registration model (P627M), and CE construction. APPLICATIONS Farm Tap Regulation Gate Regulators Gas Gathering SPECIFICATIONS D F Monitoring Regulators Fuel Gas Pressure Reduction 2xE Maximum Inlet: Nylon Seat (steel); (ductile iron); (aluminum/steel) Nitrile Seat (all units) Outlet Body Sizes , ", NPT Orifice Sizes ,, 6",,, Outlet Flow * , , , 42, , 5, , 72, , 95, , * (SCFH of.6 S.G. Natural Gas) Temperature º to 8ºF ( 8º to 82ºC) Approximate Weight (Aluminum) " 5. lbs, 2.9 kg lbs,.96 kg C P627 HIGH FLOW GAS REGULATOR OUT B MATERIALS OF CONSTRUCTION Body, Bonnet, Diaphragm Case Steel Body, Bonnet & Diaphragm Case OR Cast Ductile Iron Body/Aluminum Bonnet & Diaphragm Case OR......Steel Body/Aluminum Bonnet & Diaphragm Case (CE only) Diaphragm Nitrile (low pressure) or Neoprene (high pressure) Seat Nitrile or Nylon Orifice Aluminum OR Stainless Steel (CE only) MAXIMUM BONNET AND DIAPHRAGM CASING PRESSURE Maximum pressure to spring and diaphragm casing to prevent leak to atmosphere (internal parts damage may occur). Maximum pressure to spring and diaphragm casings to prevent burst of casings during abnormal operation (leak to atmosphere and internal parts may occur). Maximum diaphragm casing overpressure to prevent damage to internal parts. A P627H SPRING & DIAPHRAGM CASING STYLE TYPE P627 TYPE P627M TYPE P627H & P627HM IN STEEL DIE CAST ALUMINUM STEEL ALL DIE CAST ALUMINUM 7.2

2 REGULATOR REBUILD KITS P627 Low Pressure P627 Low Pressure P627 High Pressure P627 High Pressure Kit Includes Nitrile diaphragms (2), Nitrile valve disk, Nitrile diaphragms (2), Nylon valve disk, Neoprene diaphragm, Nitrile valve disk, Neoprene diaphragm, Nylon valve disk, P627 GAS REGULATOR P627 DIMENSIONS: Aluminum/Cast Ductile Iron Units Part Number P627 Low Pressure CE P627 Low Pressure CE P627 High Pressure CE P627 High Pressure CE Kit Includes Nitrile diaphragms (2), SS Nitrile valve disk, Nitrile diaphragms (2), SS Nylon valve disk, Neoprene diaphragm, SS Nitrile valve disk, Neoprene diaphragm, SS Nylon valve disk, 2xE C A SPECIAL CONSTRUCTION None Monitor * 2 VERSIONS Standard CE * N ORIFICE 6" SEAT MATERIAL Nitrile (Buna-N) Nylon * Available as Steel/Steel or Aluminum/Steel Only B B C D mm inches & mm " 627M inches mm inches mm inches H & mm " 627HM inches mm inches *F Dimensions for steel P627 and P627M - 2mm/4.7 inches N *Steel Casing/Steel Body Only NOTE: Nitrile Seat is required for 5-2 psi, 5-4 and -95 psi ranges. Nylon Seat is recommended for psi above 4. Consult factory for questions. OUT N * Steel Casing/Steel Body Only A N P F BODY SIZE N P627 PART MATRIX MATRIX: BODY SIZE " SPRING RANGE * * D TYPE Part Number IN E 4 " 4 " " F* NOTE: Nitrile Seat is required for 5-2 psi, 5-4 and -95 psi ranges. Nylon Seat is recommended for psi above 4. Consult factory for questions. CASING MATERIAL Aluminum Casing/Iron Body Steel Casing/Steel Body Aluminum Casing/Steel Body* *Supplied only with CE components, specify N in part number. OUTPUT PRESSURE psi 25 psi 75 psi 95 psi 2 MAXIMUM INLET PRESSURES: (-95 psi supply pressure limits) /8" psi, psi, psi, psi /6" psi, psi, psi, psi /4" psi psi psi psi /8" psi psi psi psi For -95 flow information, refer to 5-8 flow capacity tables. / psi psi psi psi

3 P627 PARTS ITEM DESCRIPTION PART NUMBER Cover Adj. Screw, plastic -5-2 Adjustment Screw Locknut Bonnet, P627 - aluminum Bonnet, P627M, P627H & P627HM - Steel Vent Screw Assembly Spring Guide, Upper Spring 5-2 Yellow 5-4 Green 5-8 & -95 Blue 7-5 Red 4- Blue 24- Red Spring Guide, Lower (P627 or P627M only) Build Screw, Spring Case (8 required) P627 - Aluminum P627 or P627M - Steel P627H or P627HM Diaphragm Piston (P627 or P627M only) Diaphragm P627 & P627M Aluminum/Iron Case (Nitrile) Steel Case (Nitrile) Diaphragm P627H & P627HM Steel Case (Neophene) Screw, Diaphragm P627 & P627M Screw, Diaphragm P627H & P627HM Post, Pusher P627 & P627M Assy Post, Pusher P627H & P627HM Assy Post, Pusher P627 & P627M, CE Post, Pusher P627H & P627HM, CE Diaphragm Case P627 - aluminum Diaphragm Case P627 & P627H - steel Diaphragm Case P627M & P627HM- steel Diaphragm Case, aluminum/steel Lever Lever, CE Lever Screw (2 required) Lever Screw, CE (2 required) Pin, Lever Pin, Lever, CE Lever Retainer Lever Retainer, CE Stem O Ring, nitrile Stem Backup Ring, TFE (2 required) Pin, Groove Pin, Groove CE Stem Guide Pin Clip Pin Clip CE Stem, 6SS Diaphragm Case O Ring, nitrile (P627 & P627H) Boost Body P627 or P627H Stabilizer, nitrile P627 or P627H Seat assembly - aluminum holder/nitrile disk Seat assembly - aluminum/nylon Seat assembly - 6SS holder/nitrile (CE only) Seat assembly - 6SS/nylon (CE only) Standard P627 Shown P627HM ITEM DESCRIPTION PART NUMBER Orifice - Aluminum 29 6" Orifice - 6SS (CE units) 6" Body - Ductile Iron NPT " NPT NPT Body - Steel NPT " NPT NPT * For only, order lock washer Nameplate (not shown) Diaphragm Spacer (P627H or P627HM only) O Ring, Spacer (P627H or P627HM only) O Ring, Throat Block (2 required) Throat Block (P627M or P627HM only) Backup Ring, Throat Block (2 required) Build Screw, & " aluminum unit Build Screw, all steel bodies Build Screw aluminum unit (2 required)* Spring Guide, Lower (P627H & P627HM only) Thread Locker consult factory 4 Name Plate Drive Screw (2 required) (not shown) CE Tag (not shown) 62-5-

4 4 FLOW CAPACITIES OF TURAL GAS (.6 S.G.) in SCFH /4" Body Size " Body Size Setting /2 /8 /6 /4 /8 /2 /2 /8 /6 / to 2 psig 2 (.4 to.4 5 to 4 (. to to 8 (2.4 to , , , , 2, , , 24, ,,,, 4, 7 7, 8, 42, , 5, ,, 8, 24, 24, 4 6,, 9,8 28,,, 4, 6, 649,, 9,8,9 5, 8, 44, , 2,, 5, 84,, 7, 8, 2, 27, 862 2,8 8, 2, 26, 28,9 7, 7, 2, 9, 25, 2,7 6, 44, 56, ,,,7 942, 5, 8, 8, 2,7 5, 7, 2, 27,,, 7, 25,7 29,, 6,7. Capacity is based on 2 percent droop unless otherwise noted below. 2. For pressure setting under (.69 limit the input pressure to ( to obtain the setpoint.. For 5 (.4 pressure set point, the droop is 2 ( ,, 4, , ,7 8, , ,,7 9,8 2, ,,7 2, 2, ,,7 2, 2,9 9, 488 7,,7 2, 2,9 4,8 5, 665,,7 2, 2,9 64,9 96, / , , 8, 2, ,9 7,7 26, 7, 929,8 4,7 2, 27, 4, 6, , 64, 66, 67,7 2, 2, 28, 4, 7, 5, 8, / ,7 4, ,7 4, 8, 8, 629 4, 4, 2, 4, 9, 942 6, 2,9 4, 46, 67, 6, 9, 2,8 42, 69, 94,, 8,, 44, 75,, 5,

5 FLOW CAPACITIES OF TURAL GAS (.6 S.G.) in SCFH /4" Body Size " Body Size Setting /2 /8 /6 /4 /8 /2 /2 /8 /6 / to 5 (4.8 to Setting , 4, 46, , 5, ,,8 9, 4, 44, 47, 9, 9,8 2, 48, 5, 5, 56,, 2, 7, 2, 48, 64, 68, 72, 77, 627 Body Size 627M Body Size /8 /6 /4 /8 /2 /2 /8 /6 /4 / , , , 28, , /2 / ,9 2, , , , , 28, , 2, 5. 42, 2, 25,9 5 42, 2,, ,7 22,7 5 24, ,7 27, 4,, 5 2,8 5 2, 4, 4.5 2, 5 2,9 5 to 2 psig 2 (.4 to , , , , 28, , 2, 5. 42, 2, 29, 5 42, 2,, ,7 24, 5, ,7 27, 4, 2, 9, , 4, 4.5 2,9 2,9 8. Capacity is based on 2 percent droop unless otherwise noted below. 2. For pressure setting under (.69 limit the input pressure to ( to obtain the setpoint.. For 5 (.4 pressure set point, the droop is 2 (.4 5. Capacities are based on 25 percent boost if setting is less than 2 (.8, (.2 boost if setting is from 2 to (.2 to 4, and 5 percent boost if setting is greater than (4. 2,, 9, 9, 4, 4, 5,7 22, 2,7 4,8 49,9 52,9 58, 2, 4,7 59, 8, 9, 2, 25,7,7 9, 45,9 47, 2,8 28, 8, 5,7 7, 72,, 59,7 72, 85, ,,8 47, 59,7 72, 86, 95, 947, 2, 2,9 64,8 96, 2,9 7, 2,9 64,8 96, /8 2,, 66, 95,, 4, 5,7 28, 6, 7,8 4, 8, 2, 4, 7, 4, 8, 5, / , 4, 5, 8,9 2, 2,8 2,8 52, 9, 58,,, 55,9, 5

6 FLOW CAPACITIES OF TURAL GAS (.6 S.G.) in SCFH 627 Body Size 627M Body Size Setting /2 /8 /6 /4 /8 /2 /2 /8 /6 /4 / , ,9 9, , , 25, , 5. 42, 2, 4, 42, 2, ,7, 5, ,7 27, 2, 44, 5 to 4 2, 4, (. to ,9 5 2, , , , 2, 5, 42, 2, ,7, 5, ,7, 2, 44, 79, 5 2, 44, ,9 7, 5 8,8 5 2,9 7, , 5 2, 8, 4, 5 44, 5 7, 8, 5 4, 97, 26, 5 to 8 8 (2.4 to , 9 6 2,8 5. 4, 2, 4, 4, 2, ,7, 5, ,7, 2, 44, 79, 5 2, 44, 4.5 2,9 7, 5 48, 5 2,9 7, , 5 44, 8, 5 44, 5 8, 86, 97, ,7, ,7 2, 5, 65, 2, 5, 4.5 2,9 7, 29, 2,9 7, ,8 8, 82, ,8 8, 44,, 5 79, 96, 96, , , 6, , 2, 9, 65, 2, 9, 7 to ,9 7, 29, 2,9 7, (4.8 to , 59, 5 8, 64,8 58, 5 64,8 44, 75, 5 79, 96, 96, , 8, , 2, 44, 64, 2, 44, 4.5 2,9 7, 29, 2,9 7, 5.8 8, 5 8, 5. 64,8 44, 64,8 44, 8, 5 79, 96, 96, 8. Capacity is based on 2 percent droop unless otherwise noted below. 5. Capacities are based on 25 percent boost if setting is less than 2 (.8, (.2 boost if setting is from 2 to (.2 to 4, and 5 percent boost if setting is greater than (4. /2 2.7, 9, 25, 7, 48, 2, 2, 5, 48, 72, 2, 7, 48, 72,, 59, 72, 24, 6, 59, 72, 8, 58, 72, 6

7 FLOW CAPACITIES OF TURAL GAS (.6 S.G.) in SCFH 4 to (9.7 to to (6.5 to to (6.5 to 4.5 Setting / / H or HM Body Size Port Diameter, Inches/mm / ,8 8 4,8 4, 9 4,,,7 4, 6,8 9, /4 6.4, 5, 9, 24,7 29,7 4, 9, 25,, 45,, 8, 26,, 8, 4, 2, 26, 7, 47, 8, 2, 2, 48, 79, 2, 8,, 7, 8, 97,. Capacity is based on 2 percent droop unless otherwise noted below. 4. Outlet pressure setting may shift ±5. 6. Small orifices and low pressure drops may cause the set point to shift +5 psig (.. /8 2, 28,, 5,, 6, 6, 7, 55, 64, 9, 6, 42,, 5, 47, 9, 7, 88,, /2 2.7, 5, 4, 68, 74, 87, 7, 67, 67, 77, 9, 4, 7, / / H or HM " Body Size Port Diameter, Inches (mm) / ,8 8 4,8 4, 9 4,,,7 4, 6,8 9, /4 6.4, 5, 9, 2,, 9, 26,, 8, 26,, 8, 4, 2, 26, 7, 47, 8, 2, 2, 48, 79, 2, 8,, 7, 8, 97, /8 2, 28,, 5,, 6, 6, 7, 55, 64, 2, 6, 42,, 5, 47, 9, 7, 88,, /2 2.7, 5, 4, 68, 75, 8, 95, 7, 67, 67, 77, 9, 4, 7

8 88 Setting 627H or HM Body Size Port Diameter, Inches (mm) /6 /4 /2 / , , 7.2 9, 6 4,8 2, , , , 4 to 6 4,8 26,, 4.5 (9.7 to , , 26,, , , , 2, 26, 4.6 7, 47, to 8 (6.5 to , 8, ,7 2, 2, , 79, , , 8, 24 to 8 (6.5 to ,8, , 7, 4.5 8, 97, 8. Capacity is based on 2 percent droop unless otherwise noted below. 4. Outlet pressure setting may shift ±5. 6. Small orifices and low pressure drops may cause the set point to shift +5 psig (.. /8 24, 28,, /2 2.7, 5,, 4, 6, 68, 6, 7, 75, 55, 8, 64, 95, 2, 7, 6, 42,, 5, 67, 47, 67, 77, 9, 9, 7, 4, 88,,