OUR STORY. Main Office Industrial Dr. Southaven, MS

Transcription

1

2 OUR STORY A A A A A MTankCo Supply, LLC is an equipment distributor in the LP gas industry. We concentrate on offering our customers options when it comes to propane equipment. With a large assortment of products and the knowledge to support our customers we strive to be your dedicated distributor in the LP gas industry. Our mission is to provide the leadership to advance the propane industry, the commitment to provide the best products and services available, and the integrity to be a responsible and ethical industry leader. MTankCo has been distributing propane equipment and heaters for over 50 years and has always been customer oriented. We first started as McCarson Wholesale Supply in the late 1950 s out of a small building behind Mr. McCarson s house in Walls, MS. In April of 1981, Mr. McCarson decided to pass his legacy onto Minor and Terry Smith and operated out of the same small building in Walls, MS as Smith s LP Supply Company. The expansion of Smith s LP Supply Company was inevitable and in 1984 we strategically purchased a larger facility in Southaven, MS where it operates today. More recently in June 2013, Mississippi Tank Company acquired Smith s LP to create MTankCo. The creation of MTankCo will allow existing and new customers to receive the same quality service while offering the ability to choose from an expanding equipment line. Mississippi Tank Company lends over 65 years of experience in the propane gas industry as well as other compressed gases. They have been manufacturing tanks for trucks, transports, and storage facilities since the early 1950 s and offering services such as tests, inspections, and repairs. Mississippi Tank Company is the largest manufacturer of transports in the US and has continued to expand its Hattiesburg, MS and Vincennes, IN facilities to best serve their growing base of customers. The combined experience of Mississippi Tank Company and MTankCo Supply will allow our customers to have not only an array of products to choose from, but to have great service to assist them in their LP gas equipment needs. A MTankCo Supply, LLC Headquarters 3000 W. 7th St. Hattiesburg, MS Main Office Industrial Dr. Southaven, MS Customer Service Fax Online sales sales@mtankco.com Midwest Division 1301 E. Elkhorn Rd. Vincennes, IN 47591

3 Distributor of Gas Products

4 CONTENTS M H I J K L SECTION A PAGE Regulators Pigtails and Hogtails SECTION B Internal Valves and Accessories SECTION C Actuators and Accessories Emergency Shutoff Valves and Accessories SECTION D Relief Valves Bypass Valves Excess Flow Valves Back Check Valves Vent Valves Globe and Angle Valves SECTION E Ball Valves Hose Assemblies SECTION F Fittings (Galvanized, Black Iron, and Forged Steel) Sight Flow Swing Check Valves Gauges and Accessories SECTION G Pumps and Pump Parts Motors Meters and Registers SECTION H Plant and Vehicle Remote Controls Reels Hoses and Accessories Flex Connectors Hose End Valves and Adapters Chock Blocks Acme Adapters Filler and Vapor Couplings Acme Caps, Plugs, and Chains Dispenser Valves and Adapters Engine Fuel Bulkheads and Carb Fittings Filler Couplings and Adapters LPG Filling Heads...119

5 CONTENTS Breakaway Couplings QCC Caps, Adapters, and Connectors SECTION I POL Adapters Flare/Brass Fittings Copper Tubing Corrugated Stainless Steel Tubing Gas Piping Plastic Pipe Con-Stab Fittings Risers Appliance Connectors SECTION J Domestic Tank Valves and Accessories Cylinders, Tanks, Cylinder Valves, and Accessories SECTION K Safety Equipment Decals and Signs Pressure Gauge Snubbers and Leak Detectors Hose Barbs, Ferrules and Menders Pressure Test Blocks and Test Kits Low Pressure Adapters, Pressure Test Gauges, and Accessories Manometers Gas Detectors Magnehelic Gauges and Pipe Thread Sealant Anode Bags and Cathodic Protection Equipment Lock Caps and POL Locks Scales and Scale Parts SECTION L Tools and Accessories SECTION M Outdoor and Camping Accessories Camping Tees, Elbows, and Assemblies Camping Fittings Flow-Longer and Stay-Longer Kits Quick Connectors Propane Hoses and Accessories Propane Brass Fittings SECTION N General Information M H I DJ K L

6 REGULATORS First Stage Excela-Flo Domestic Regulators A MEGR-1122H Series Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Outlet Set Range (PSI) Point (PSI) MEGR-1122H-AAJ Compact 1,000,000 1/4 FNPT 1/2 FNPT MEGR-1122H-AAJXB** Compact 1,000,000 1/4 FNPT 1/2 FNPT MEGR-1622H-BGJ Full Size 2,200,000 1/2 FNPT 1/2 FNPT MEGR-1622H-DGJ Full Size 2,500,000 3/4 FNPT 3/4 FNPT MEGR-1622H-HGJ Full Size 2,300,000 F. POL 1/2 FNPT MEGR-1622H-JGJ Full Size 2,750,000 F. POL 1/2 FNPT *Based on 30 PSIG inlet pressure and 20% droop **Indicates vent orientation over pressure taps MEGR-1622H Series The MEGR-1122H and MEGR-1622H Series Domestic Regulators are used to reduce LP gas tank pressures for second stage regulators (normally 10 PSIG). All MEC first stage regulators are red indicating high outlet pressure. First stage regulator vents have 3/4 FNPT tapped ports and E-Z Grip screens located over the outlet. The MEGR-1122H Series offers optimal relief performance that well exceeds UL test requirements providing double failure over pressure protection when used with MEC MEGR-1622 and MEGR-1652 Serious Sound Stage regulators. All MEC Excela-Flo domestic regulators feature a 25 year recommended replacement life and exclusive tear away leak check adhesive sticker. MEGR-1122H Series - Offers a compact design perfect for tight applications such as underground tank domes. They feature an adjustment range from 9-12 PSIG (factory 10 PSIG), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms and large aluminum precision machined orifice to minimize corrosion resistance against weather or contaminated gas. MEGR-1622H Series - Offers the same features as the compact MEGR-1122H Series in a full size version as well as having a reinforced diaphragm for superior downstream regulation, heavy duty wrench flats, and a large 3/4 FNPT tapped drip lip vent to help prevent relief vent blockage. TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSIG; Exerior Finish: Red powder coat; Orifice Size:.15 (compact) 7/32 (full); Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (2); Relief Travel Stop: Molded in adjustment cap - gray (compact), black (full size) Second Stage Domestic Regulators MEGR-1222 Compact Series Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Outlet Set Range ( WC) Point ( WC) MEGR-1222-BAF Compact 500,000 1/2 FNPT 1/2 FNPT MEGR-1622-BCF Full Size 710,000 1/2 FNPT 1/2 FNPT MEGR-1622-CFF Full Size 1,300,000 1/2 FNPT 3/4 FNPT MEGR-1622-DFF Full Size 1,300,000 3/4 FNPT 3/4 FNPT MEGR-1652-CFF** Back Mount 1,000,000 1/2 FNPT 3/4 FNPT MEGR-1652-DFF** Back Mount 1,000,000 3/4 FNPT 3/4 FNPT *Based on 10 PSIG inlet pressure and 20% droop **Indicates back mount configuration MEGR-1622 Full Size Series The MEGR-1222, MEGR-1622, and MEGR-1652 Back Mount Series Regulators are used to reduce outlet pressures from first stage regulators (normally 10 PSIG) to 11 WC in domestic installations. All MEC second stage regulators are green indicating low outlet pressure. Second stage regulator vents have 3/4 FNPT tapped ports and an exclusive E-Z grip screen located over the inlet. All MEC second stage regulators feature a stainless steel inlet filter screen to reduce debris from passing through the regulator. Both the MEGR-1622 and the MEGR-1652 Series offer optimal relief performance that well exceeds UL test requirements providing double LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 1

7 REGULATORS failure overpressure protection (no more than 2 PSI downstream pressure) when used with MEGR-1122H and MEGR-1622H Series First Stage regulators. All MEC Excela-Flo domestic regulators feature a 25 year recommended replacement life and exclusive tear away leak check adhesive sticker. MEGR-1222 Series - Offers a compact second stage regulator design perfect for lower BTU applications. They feature an adjustable range from 8-14 WC (factory 11 WC), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms and large aluminum precision machined orifices providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. MEGR-1622 and MEGR-1652 Series - Offers the same features as the compact MEGR-1222 Series in a full size, high capacity version. MEC full size second stage regulators have a large fabric reinforced diaphragm for superior downstream regulation, heavy duty wrench flats, and a large 3/4 FNPT tapped drip lip vent to help prevent relief valve blockage. The MEGR-1622 Series have both the inlet and outlet in line where the MEGR-1652 Series have a rear discharge back mount outlet for convenient wall mount applications. MEGR-1652 Back Mount Series A TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 10 PSIG; Exterior Finish: Green powder coat; Orifice Size: 14 (Compact) 7/32 (Full); Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (2); Relief Travel Stop: Molded in adjustment cap - gray (compact), black (full size) Integral Two Stage Domestic Regulators Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Outlet Set Range ( WC) Point ( WC) MEGR-1232-BBF Compact 450,000 1/4 FNPT 1/2 FNPT MEGR-1232-BBFXA** Compact 450,000 1/4 FNPT 1/2 FNPT MEGR-1232-HBF Compact 450,000 F. POL 1/2 FNPT MEGR-1232-HBFXA** Compact 450,000 F. POL 1/2 FNPT MEGR-1632-BCF Full Size 700,000 1/4 FNPT 1/2 FNPT MEGR-1632-BCFXA** Full Size 700,000 1/4 FNPT 1/2 FNPT MEGR-1632-CFF Full Size 950,000 1/4 FNPT 3/4 FNPT MEGR-1632-CFFXA** Full Size 950,000 1/4 FNPT 3/4 FNPT MEGR-1632-HCF Full Size 700,000 F. POL 1/2 FNPT MEGR-1632-HCFXA** Full Size 700,000 F. POL 1/2 FNPT MEGR-1632-JFF Full Size 900,000 F. POL 3/4 FNPT MEGR-1632-JFFXA** Full Size 900,000 F. POL 3/4 FNPT *Based on 30 PSIG inlet pressure and 20% droop **Indicates regulator vents opposite pressure tap ports MEGR-1232 Compact Series The MEGR-1232 Compact Series and the MEGR-1632 Full Size Series Regulators combine the first and second stage regulator set-up into one convenient unit converting tank pressure to 11 WC. All MEC integral two stage domestic regulators are gray indicating low outlet pressure. Integral two stage regulators are recommended for installations with short piping distances, but provide the same advantages of two stage regulation with a single unit. All MEC integral two stage regulator vents have tapped ports (7/ First Stage) (3/4 FNPT - Second Stage) and an exclusive E-Z grip screen located over the outlet. The MEGR-1232 and the MEGR-1632 Series both offer optimal relief performance that well exceeds UL test requirements providing over pressure protection of no more than 2 PSI downstream pressure. MEC Excela-Flo integral two stage domestic regulators feature a 25 year recommended replacement life, an exclusive Tri-Tap (tank, 10 PSI, 11 WC) pressure port system, and tear away leak check adhesive sticker. MEGR-1232 Compact Series - Offers a compact integral two stage regulator design perfect for lower BTU applications and confined spaces. They feature an adjustable range from 8-14 WC (factory 11 WC). Stainless steel integral components, fluorocarbon (FKM) seat discs, sales@mtankco.com

8 REGULATORS Integral Two Stage Domestic Regulators (continued) MEGR-1632 Full Size Series - Offers the same features as the compact MEGR-1232 Series in a full size, high capacity version. The full size MEGR-1632 diaphragm provides superior downstream regulation, heavy duty wrench flats, and a large 3/4 FNPT tapped drip lip vent to help prevent relief vent blockage. A MEGR-1632 Full Size Series TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSIG; Exerior Finish: Gray powder coat; Orifice Size: 17 (Compact) 7/32 (Full); Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (3); Relief Travel Stop: Molded in adjustment cap - gray (compact), black (full size) Automatic Changeover Regulators Type Primary Cylinder Capacity Auxilary Cylinder Capacity Outlet Adj. Outlet Set Inlet Outlet BTU/HLPG (1) in BTU/H LPG* Range ( WC) Point ( WC) MEGR-175CS61222BAF Compact 400, ,000 1/4 IF (2) 1/2 FNPT MEGR-175CS61622-BCF Full Size 650, ,000 1/4 IF (2) 1/2 FNPT *Based on 30 PSIG inlet pressure and 20% droop MEGR-175CS61222BAF Compact Series MEGR-175CS61222BAF Full Size Series The MEGR-175CS61222-BAF and MEGR-175CS61622-BCF Series Two Stage, Automatic Changeover Regulators combine the first and second stage regulator into one unit converting tank pressure to 11 WC. MEC Excela-Flo Automatic Changeover regulators prevent gas outages by switching supply cylinders over to the reserve cylinder automatically when the primary cylinder is near empty. When the primary cylinder is depleted causing the changeover to occur, a red indicator will appear signifying the reserve cylinder is now in use and the primary cylinder can be refilled without loss of service. MEGR-175CS61222-BAF Series: Offers a compact two stage regulator option for lower BTU applications such as mobile or seasonal homes. They feature a second stage adjustment from 8-14 WC (factory 11 WC), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms, and large precision machined aluminum orifices providing superior downstream regulation and maximum resistance against weather or contaminated gas. MEGR-175CS61622-BCF Series: Offers all of the same features as the compact MEGR-175S61222 series but with a full size, high capacity, second stage regulator option. The full size second stage diaphragm provides superior downstream regulation, has heavy duty wrench flats, and a large ¾ FNPT tapped drip lip vent to help prevent relief vent blockage perfect for manifolding larger tanks together such as 420 lb. cylinders. TECHNICAL SPECIFICATIONS: Maximum Inlet Pressure: 250 PSIG; Exterior Finish: Green powder coat; Orifice Size: 14 (compact) 4-7/32 (full); Seat Material: (NBR) First stage, fluorocarbon (FKM) 2nd stage; Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast zinc/plastic first stage, die cast aluminum second stage; Listings: c UL us /UL144 2nd stage; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (1); Relief Travel Stop: Molded in adjustment cap - gray (compact), black (full size) LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 3

9 REGULATORS 2 PSI Service Regulators Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Outlet Set Range (PSI) Point (PSI) MEGR-1622E-BCH Full Size 1,100,000 1/2 FNPT 1/2 FNPT MEGR-1622E-DCH Full Size 1,400,000 3/4 FNPT 3/4 FNPT MEGR-1652E-DCH Full Size 1,400,000 3/4 FNPT 3/4 FNPT *Based on 10 PSIG inlet pressure and 20% drop ** Indicates back mount configuration The MEGR-1622E and MEGR-1652E Series are used to reduce outlet pressures from first stage regulators (normally 10 PSI) to a nominal 2 PSI. 2 PSI service regulators are used in conjunction with an LPG line regulator either at the indoor appliance or a remote manifold distribution header inlet. All Marshall Excelsior s (MEC) 2 PSI service regulators are green with white adjustment caps. The 2 PSI service regulator vents have ¾ FNPT tapped vents and an exclusive E-Z grip screen located over the inlet. All MEC 2 PSI service regulators feature a stainless steel inlet filter screen to reduce debris from passing through the regulator. Both the MEGR-1622E and MEGR-1652E series offer optimal relief performance that well exceeds UL test requirements. All MEC Excela-Flo domestic regulators feature a 25 year recommended replacement life and an exclusive tear away leak check adhesive sticker. MEGR-1622E Series: Offers a full size high capacity molded lip fabric reinforced diaphragm, stainless steel internal components, fluorocarbon (FKM) seat discs, precision machined aluminum orifices, and an adjustment range from PSI (factory 2 PSI) providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. MEGR-1652E Series: Offers all of the same features as the MEGR-1622E Series but with a rear discharge back mount outlet for convenient wall mount applications. MEGR-1622 Series MEGR-1652E Series A TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 10 PSI; Exterior Finish: Green powder coat; Orifice Size: 7/32 ; Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (2); Relief Travel Stop: Molded in adjustment cap - white First Stage High Pressure Industrial Regulators Inlet/Outlet Orifice PSIG Outlet PSIG Outlet BTU/HLPG@ BTU/HLPG@ Monitor Set Point Range 100 PSI Inlet 20 PSI Inlet MEGR-1627/497 1 FNPT 1/ No 36,600,000 6,050,000 MEGR-1627/576 2 FNPT 1/ No 45,000,000 6,003,000 MEGR-1627/5810 3/4 FNPT 3/ No 11,700,000 4,700,000 MEGR-1627/6210 3/4 FNPT 1/ No 12,400,000 6,700,000 MEGR-1627/ FNPT 1/ No 25,100,000 6,900,000 MEGR-1627M/267 2 FNPT 1/ Yes 36,100,000 6,003,000 MEGR-1627M/471 1 FNPT 1/ Yes 25,100,000 6,900,000 MEGR-1627R/113 3/4 FNPT 3/ Relief 9,800,000 4,200,000 MEGR-1627V/7710* 1 FNPT 1/ No 25,100,000 6,900,000 * Viton construction The MEGR-1627 Series Commercial/Industrial Regulator is a large capacity, high pressure unit for use in conjunction with MEGR-CS1200 or MEGR-S1202 Series regulators. It can also be used on final-stage (PSI to PSI) service. The diaphragm case and/or regulator body on the MEGR-1627 Series can be rotated in any of four positions to allow installation in locations with limited space. Available with a monitor or integral relief valve. The MEGR-1627 Series is perfectly suited for jurisdictional systems, grain dryers, direct fired vaporizers or other high capacity service applications. MEGR-1627 Series sales@mtankco.com

10 REGULATORS First Stage/High Pressure Industrial Regulators (continued) Inlet/Outlet Orifice PSIG Outlet PSIG Outlet Monitor Set Point Range 100 PSI Inlet 20 PSI Inlet MEGR /78 2 FNPT 1/ ,900 47,000,000 7,700,000 NOTE: Other configurations and materials available upon request. A MEGR-1630 Series The MEGR-1630 Series First Stage Industrial Regulators are large capacity, high pressure units for use in conjunction with MEGR-S1202 Series regulators. They can also be used on final stage (pounds-to-pounds) service. These regulators are best suited for industrial applications where high flow capacity is required. TECHNICAL SPECIFICATIONS for the MEGR-1627 and MEGR-1630 Series: Max. Inlet Pressure: 10 PSI; Exterior Finish: Gray powder coat; Orifice Size: 3/8, 5/16 or 1/2 ; Orifice Material: Aluminum; Diaphragm: Fabric reinforced (NBR); Bonnet/Body Material: Die cast aluminum/iron; Regulator Spring: Steel; Listings: c UL us /UL144; Relief Travel Stop: Molded in adjustment cap - white; Temp. Range: -20 F / 180 F High Pressure Regulators - Adjustable Description Inlet/Outlet Outlet Adj. Range PSIG MEGR MEGR Adj. High Pressure Regulator 1/4 FNPT 1-60 MEGR High Pressure Regulators - Fixed MEGR-6120 Series Description Inlet/Outlet Outlet Set Point PSIG MEGR MEGR MEGR MEGR High Pressure Fixed Regulator 1/4 FNPT 30 MEGR MEGR MEGR MEGR-6121 Series The MEGR-6120 Series are UL listed highpressure regulators that meet a variety of applications for liquid or vapor service. The compact body design makes them useful in installations with space limitations. The basic MEGR-6120 Series come equipped with a handwheel adjustment. The ME6121 Series has a tamper-resistant spring case. The MEGR-6120 and MEGR-6121 Series are UL listed as high pressure, non-relief regulators. They contain brass materials that are not compatible with anhydrous ammonia service. TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSI (17, 2 bar); Gauge Port: 1/4 FNPT; Exterior Finish: Red wet coat; Diaphragm: Fabric reinforced Buna N; Body/Bonnet Material: Die cast aluminum; Liquid Capacity: 3-5 GPH; Listings: UL Listed /UL 144 Outlet Set Point Capacities: BTU/H LPG (Vapor) Inlet Pressure BTU/HR 50 PSI 850, PSI 100 PSI 1,700, PSI 2,500, PSI 50 PSI 900, PSI 1,800, PSI 100 PSI 1,500, PSI 2,000, PSI 1,300, PSI 150 PSI 1,800, PSI 2,300,000 * Approximate BTU/H vapor capacities taking 10-20% droop into consideration NOTE: Side Outlet Connection Style (Plugged): 1/4 MNPT, pressure gauge (MEJ500 Series) can be installed LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 5

11 REGULATORS High Pressure Regulators Inlet/Outlet Outlet Pressure Outlet Adj. Setting PSIG Range PSIG 100 PSI Inlet MEGR-164/ ,700,000 1/2 FNPT x 1/2 FNPT MEGR-164/35 Adjustable High ,600,000 MEGR-164/36 Pressure Regulator ,200,000 MEGR-164/ ,300,000 MEGR-164SR/21 1/2 FNPT x 1/2 FNPT ,000,000 MEGR-164SR/22 Adj. High Pressure Regulator ,000,000 MEGR-164SR/23 w/ Internal Relief Valve ,600,000 MEGR-164-6/ ,700,000 MEGR-164-6/35 3/4 FNPT x 3/4 FNPT ,600,000 Adj. High Pressure Regulator MEGR-164-6/ ,200,000 MEGR-164-6/ ,300,000 A MEGR-164 Series - Offers a wide selection of available pressure ranges. High pressure regulators are typically used to reduce tank pressure to an intermediate pressure for use by another regulator. They may be used as high pressure regulators on distribution systems when used in conjunction with first stage downstream regulators. When equipped with an integral relief valve (MEGR-164SR Series), the regulator may be used as a final stage regulator on high pressure systems. It may also be used as a first stage regulator when set at 10 PSIG or less. The 1/4 FNPT tapped side outlet can be used to install a pressure gauge or a hydrostatic relief valve. This series contains brass materials that are not compatible with anhydrous ammonia service. MEGR-164 Series TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSI; Inlet Connection: 1/2 FNPT or 3/4 FNPT; Outlet Connection: 1/2 FNP or 3/4 FNPT; Exterior Finish: Gray urethane; Regulator Spring: Steel; Stem Guide/Disk Holder: Stainless steel; Diaphragm: Fabric reinforced nirile (NBR); Bonnet/Body Material; Cast aluminum; Vent: Non-aluminum; Listings: UL Listed/UL 144. High Pressure Regulator Type Inlet (1 Port) / Outlet Pressure Maximum Inlet Outlet (3 Ports) Range Pressure (PSIG) MEGR-11301F Adjustable 1/4 FNPT The MEGR-11301F is a reliable and accurate regulator making it ideal for numerous high pressure applications. This multi-purpose regulator can be used as a pilot supply or pressure-loading regulator where high pressure operating medium must be reduced for use by gas regulator pilots or pressure-loaded regulators. Its rugged design and multiple outlet ports offer versatility for a wide variety of applications. MEGR-11301F TECHNICAL SPECIFICATIONS: Type: Adjustable/PSI; Max. Inlet Pressure: 5500 PSIG; Exterior Finish: Brass; Bonnet/Body Material: Brass; Bottom Cap and Spring Case: Brass; Gasket: Nitrile (NBR); Valve Spring: Stainless steel; Diaphragm: Stainless steel; Valve Disks: Nylon; Vent: 4 Holes (5/32 each); Temp. Rang: -40º F/225º F sales@mtankco.com

12 REGULATORS High Pressure LP Gas Regulators A MEGR Pre-Set at 20 PSIG Type Max Inlet Outlet Adj. BTU/H Inlet Outlet Pressure Range 40 PSI MEGR Fixed 5 MEGR Fixed 10 MEGR Fixed 20 MEGR Fixed 250 PSIG 1/4 FNPT 1/4 FNPT 30 1,200,000 MEGR-350 Adjustable 0-10 MEGR Adjustable 0-20 MEGR Adjustable 0-30 MEGR-351 Adj. (Full Flow POL) 0-10 MEGR-360 Adj. (Black F. QCC) 0-10 MEGR-350 Adjustable 0-10 PSIG The MEGR-130 Series Fixed High Pressure Single Stage Regulators provide an economical solution for pounds to pounds service applications and regulates air and LP gas. Regulators must be installed in compliance with federal, state or local codes, or laws in accordance with NFPA 58. MEGR-350 Single Stage, Adjustable High Pressure Regulator. The body and bonnet of both the fixed and adjustable regulators are precisely machined and feature a crimped design and fabric reinforced rubber diaphragm creating a positive seal for leak-free performance. MEGR-360 Type I (QCC) is designed for appliances such as turkey fryers, camp stoves and torch applications that require pounds to pounds pressure instead of inches water column. They meet or exceed most requirements on a specific outlet setting (0-10 PSI) depending on the application. TECHNICAL SPECIFICATIONS: Type: Adjustable or fixed/psi; Max. Inlet Pressure: 250 PSIG (17,2 bar); Orifice Diameter: ; Exterior Finish: Red anodized; Diaphragm: Fabric reinforced Buna N; Bonnet/Body Material: Die Cast Zinc; Listings: UL Listed/UL 144 Second Stage Low Pressure Industrial Regulators MEGR-1652 Back Mount Series MEGR-CS1200 SERIES Outlet Outlet Max BTU/H BTU/H Inlet/Outlet Orifice Pressure Pressure Operating LPG@ LPG@ Range Setting Inlet 25 PSI Inlet 10 PSI Inlet MEGR-CS1200IR6EC1 3/4 FNPT 1/2 2,100,000 1,600,000 MEGR-CS1200IR6EC3 1 FNPT 1/2 11 WC 2,500,000 1,900,000 MEGR-CS1200IR6EC6 1-1/4 FNPT 1/ WC 3,100,000 2,800,000 MEGR-CS1200IR7EC1 3/4 FNPT 5/16 ~1,250,000 ~985,000 7 WC 25 PSIG MEGR-CS1200IR7EC3 1 FNPT 5/16 ~1,620,000 ~1,525,000 MEGR-S1202G-BNC 1-1/2 FNPT 1 11 WC 14,700,000 10,800, WC MEGR-S1202G-CNC 2 FNPT 1 11 WC 30,000,000 23,000,000 MEGR-S1202H-CNK 2 FNPT PSI 2 PSI 22,200,000 10,300,000 NOTE: Other configurations and materials available upon request. ~ Flow Rates listed in BTU Natural Gas WC = Water Column The MEGR-S1202/MEGR-CS1200 Series commercial/industrial regulators are large capacity, low pressure second stage units for installation at schools, bakeries, and similar applications. They contain a limited capacity internal relief valve and can be used in conjunction with either MEGR-1627 Series or MEGR-1630 Series high-pressure regulators. MEGR-S1202 SERIES For high capacity installations, the MEGR-1289H Series relief valve is required to be installed in the downstream system. TECHNICAL SPECIFICATIONS: Type: Adjustable/inches WC or PSI; Max. Inlet Pressure: 25 PSIG (17,2 bar); Orifice Diameter: 3/8, 5/16, 1/2 or 1 ; Exterior Finish: Gray powder coat; Body Material: Cast iron; Regulator Spring: Music wire; Spring Case/Stem Guide/ Disk Holder: Aluminum; Disk/ Diaphragm and O-ring: Fabric reinforced Nitrile (NBR); Closing Cap Gasket: Neoprene LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 7

13 REGULATORS Second Stage Industrial Regulators Inlet/Outlet Orifice Range of Outlet Adjustment Set Point 10 PSI Inlet 20 PSI Inlet MEGR-1133H-2 2 FNPT PSI 2 PSI 27,405,000 52,700,000 MEGR-1133H-3 2 FNPT PSI 5 PSI 22,300,000 41,600,000 MEGR-1133L-4 2 FNPT WC 14 WC 45,600,000 77,100,000 MEGR-1133L-6 2 FNPT PSI 2 PSI 46,700,000 77,100,000 NOTE: Other configurations available upon request The MEGR-1133 Series Second Stage Industrial Regulators are large capacity, self operated, low or high pressure units for use in applications with loads up to 110,000,000 BTU/H capacity. These regulators are best suited for industrial applications where high flow capacity and a downstream monitor control line are required. MEGR-1133 Series A TECHNICAL SPECIFICATIONS: Type: Adjustable/PSI/WC; Max. Inlet Pressure: 60 PSIG; Exterior Finish: Gray powder coat; Body Material: Iron; Orifice Material: Aluminum; Regulator Spring: Steel; Stem Guide/Disk Holder: Aluminum; Diaphragm: Fabric reinforced Nitrile (NBR); Valve Stem: Aluminum; Bonnet Cap and Bonnet: Aluminum Light Commercial Second Stage Regulators Capacity in Outlet Adj. Outlet Set Inlet Outlet BTU/HLPG* Range (PSI) Point (PSI) MEGR-1HSRL-BFC 2,000,000 3/4 FNPT 3/4 FNPT MEGR-1HSRL-CFC 2,500,000 1 FNPT 1 FNPT *Based on 10 PSIG inlet pressure and 20% droop. MEGR-1HSRL Series: These light commercial second stage regulators are used to reduce outlet pressures from first stage regulators (normally 10 PSI) to 11 WC. They offer a full size, high capacity light commercial type regulator with a heavy duty cast iron body with a universal body to bonnet union for fast relocation of inlet to outlet vent location. MEGR-1HSRL Series TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 40 PSIG; Exterior Finish: Gray powder coat; Diaphragm: Fabric reinforced (NBR); Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum/cast iron; Orifice Size: 3/8 Low Pressure Single Stage Regulators Description Vent Orientation MEGR-218 SN FF POL w/ Plastic Handwheel x 3/8 FNPT - 90 Vent 90 MEGR-230 1/4 FNPT Inlet X 3/8 FNPT Outlet Over Outlet MEGR SN.9 GPM Excess Flow POL Inlet x 3/8 FNPT Outlet Over Outlet MEGR /4 FNPT Inlet X 3/8 FNPT Outlet - 90 Vent 90 MEGR Black F. QCC Inlet x 3/8 FNPT Outlet - 90 Vent 90 MEGR Black F. QCC Inlet (100,000 BTU/H) x 3/8 FNPT Outlet Over Outlet MEGR-231 Hardnose FF POL Inlet x 3/8 FNPT Outlet - 90 Vent 90º MEGR-230 Series The MEGR-230 Single-Stage Regulators are approved for use in small portable applications and outdoor cooking appliances utilizing low pressure. Single stage regulators are not approved for RV use. MEGR TECHNICAL SPECIFICATIONS: Orifice Diameter: Diameter; BTU Capacity: 140,000 BTU (based on 25 PSI 9 WC delivery pressure); Max. Inlet Pressure: 250 PSI; Inlet Connection: 3/8 FNPT; Exterior Finish: Green wet coat; Diaphragm: Molded with O-ring bonnet/body seal; Bonnet/Body Material: Die cast aluminum; Listings: UL Listed/UL 144; Mounting Holes: 3-1/2 on center sales@mtankco.com

14 REGULATORS Pressure Reducing Regulators A Inlet x Outlet Orifice Sizes, Outlet Pressure Ranges, Vent BTU/H Outlet Pressure Setting Connection Style Inches (mm) Inches WC (mbar) Orientation 100 PSI Inlet MEGR-1912/101 1/4 x 3/8 FNPT (1,8) 11-inches WC (27 mbar) (23-32) 242,953 MEGR-1912/104 1/4 x 1/4 FNPT (1,8) 11-inches WC (27 mbar) (23-32) 242,953 MEGR-1912/109 1/4 x 3/8 FNPT (1,8) 7-inches WC (17 mbar) 5-10 (12-25) 242,953 MEGR-1912/197 1/4 x 3/8 FNPT (2,4) 20-inches WC (50 mbar (30-60) 313,488 MEGR-1912H/108 1/4 x 3/8 FNPT (2,4) 1.5 PSI (103 mbar) PSI ( mbar) Over Outlet 297,814 MEGR-1912H/520 1/4 x 1/4 FNPT (2,4) 3.5 PSI (241 mbar) PSI ( mbar) MEGR-1912H/534 1/4 x 1/4 FNPT (1,8) 1.5 PSI (103 mbar) PSI ( mbar) MEGR-1912N/113 1/4 x 3/8 FNPT (1,8) 5-inches WC (27 mbar) 3-7 (7-17) MEGR-1912N/194 1/4 x 1/4 FNPT (1,8) 5-inches WC (27 mbar) 3-7 (7-17) *NOTE: Other configurations and materials available upon request. The MEGR-1912 Series UL Listed regulators are direct-operated, spring-loaded models designed for use in a variety of service and industrial applications. These regulators have limited capacity internal relief across the diaphragm to help minimize over pressurization. The MEGR-1912 Series, with capacity ratings of less than 320,000 BTU/HR (129 scfh), are often used on small portable outdoor appliances. MEGR-1912 Series Underwriters Laboratories requires horizontally mounted regulators to be installed with vent opening protection to prevent blockage by freezing rain. TECHNICAL SPECIFICATIONS: Type: Single stage; Max. Inlet Pressure: 250 PSI; Vent Screen: Monel; Gasket: CGR 2750; Relief Valve: Brass and zinc; Control and Relief Valve Spring: Plated steel; Diaphragm Assembly: Nitrile (NBR) with zinc disk; Spring Case: Die cast zinc; Spring Seat: Plated steel; Diaphragm Plate: Plated steel; Body Material/Lower Casting: Die cast zinc; Listings: UL Listed/ UL 144 Compact Integral Two Stage Regulators Description BTU/H LPG@ 30 PSI Inlet* MEGR-291 1/4 FNPT Inlet x 3/8 FNPT Outlet 175,000 MEGR-298 1/4 FNPT Inlet x 3/8 FNPT Outlet - 90 Vent 175,000 MEGR-295 HN Excess Flow POL Inlet x 3/8 FNPT Outlet - 90 Vent 175,000 MEGR Green Type I QCC Inlet x 3/8 FNPT Outlet 175,000 MEGR Green Type I QCC Inlet x 3/8 FNPT Outlet - 90 Vent 175,000 MEGR-291H High Capacity Regulator 1/4 FNPT Inlet x 3/8 FNPT Outlet 225,000 MEGR-298H High Capacity Regulator 1/4 FNPT Inlet x 3/8 FNPT Outlet - 90 Vent 225,000 MEGR-291H High Capacity Regulator Green Type I QCC Inlet x 3/8 FNPT Outlet 225,000 MEGR PSI Regulator 1/4 FNPT Inlet x 3/8 FNPT Outlet 225,000 MEGR PSI Regulator 1/4 FNPT Inlet x 3/8 FNPT Outlet - 90 Vent 225,000 Accessories MEGR-900 (Z-Bracket) MEGR-861 (First Stage Cover) MEGR-862 (Second Stage Cover) *BTU/H 20% Droop MEGR-291 and MEGR-291H Setpoint: 100 PSIG 11 WC Outlet 30 SCFH Air MEGR-300 Setpoint: 100 PSIG 2 PSI Outlet 30 SCFH Air MEGR-291 MEGR-295 The MEC MEGR-291 Two Stage Regulators are approved for use in nearly all portable applications and outdoor cooking appliances utilizing low pressure. They feature all zinc body construction, high and low 1/8 NPT pressure tap ports, an integral second stage drip lip vent and optional standard or 90 degree vent locations. The MEGR-291H High Capacity Compact Integral Two Stage Regulator is ideal for high demand RV, outdoor appliances, seasonal homes, gas fire places, water heaters, ranges or other moderate to low demand domestic home installations. (Green bonnet identifies high capacity model). LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 9

15 REGULATORS The MEGR-300 Compact Integral Two Stage 2 PSI Regulator is ideally suited for installations to reduce tank pressure to a nominal 2 PSI outlet pressure. 2 PSI systems typically incorporate a line service regulator within the home that further reduces the 2 PSI system pressure to approximately 11 WC prior to the appliance. (Red bonnet identifies 2 PSI model). MEGR-291, MEGR-291H and MEGR-300 Series meet UL, RVIA and NFPA requirements. TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSI; Inlet Connection: 1/4 FNPT; Exterior Finish: Raw zinc/powder coated; Diaphragm: Fabric reinforced molded with O-ring bonnet/body seal; Diaphragm Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast zinc; Listings: UL Listed/UL 144; Mounting Holes: 3-1/2 on center; Pressure Taps: 1/8 FNPT Plugged MEGR-291H MEGR-300 A Liquid Backpressure Regulator/Relief Inlet/Outlet Relief Capabilities GPM/LPG Relief Pressure Outlet PSIG PSIG (BAR) (BAR) 10 PSI Over 50 PSI Over Set Point Set Point MEGR-198H-22 3/4 FNPT 100 (6.9) 70 to 140 (4.8 to 9.7) MEGR-198H-30 1 FNPT 100 (6.9) 70 to 140 (4.8 to 9.7) The MEGR-198H Series Liquid Service Valves are direct-operated relief valves for use on relief and back pressure applications involving large LP-Gas pumping systems and vaporizers. Internal pressure registration eliminates the need for a control line. MEGR-198H TECHNICAL SPECIFICATIONS: Type: Adjustable/PSI; Max. Inlet Pressure: 250 PSIG; Exterior Finish: Gray powder coat; Regulator Spring: Plated steel; O-ring Seat: Nirile (NBR); Diaphragm: Neoprene; Body Material/Spring Case: Iron For more information on Marshall Excelsior products or installation instructions contact your MTankCo. representative or go to sales@mtankco.com

16 REGULATORS First Stage Regulators CAVAGNA GROUP A 984HP Type Capacities in BTU\HR Outlet Adj. Range Outlet Pressure Inlet Outlet (SCMH) propane PSIG (bar) Setting, PSIG (bar) 984HP ,000,000 (11.26) 1/4 NPT 1/2 NPT No adjustment 10 (0.69) 988HP ,000,000 (22.51) 1/2 NPT 1/2 NPT 4-6 ( ) 988HP ,000,000 (22.51) POL 3/4 NPT 4-6 ( ) 5 (0.34) 988HP ,250,000 (25.33) POL 3/4 NPT 4-6 ( ) 988HP ,100,000 (23.64) 1/2 NPT 1/2 NPT 8-12 ( ) 988HP ,400,000 (27.01) 3/4 NPT 3/4 NPT 8-12 ( (0.69) 988HP ,100,000 (23.64) POL 1/2 NPT 8-12 ( HP ,250,000 (25.33) POL 3/4 NPT 8-12 ( HP Type The 984HP and 988HP First Stage Regulators reduce the inlet pressure to a medium level to feed a second stage regulator. The 984HP and 988HP regulators are designed for Type A installations or for installations Type C. They have to be used outdoors in correct mounting position with vent-hole turned downwards. In their standard version, the 984HP regulators are delivered with vent-hole turned in line with the outlet fitting. TECHNICAL SPECIFICATIONS: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: ; Cover Screws: Stainless steel; Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 100 PSIG, 140,000 BTU, outlet pressure 10 PSIG; Provided Flows: Flow based on 25 PSIG (1,725 Bar) inlet pressure and 20% drop (in accordance with UL144 standard) Second Stage Regulators CAVAGNA GROUP 988LP Type 998LP Type Capacities in BTU\HR Outlet Pressure Outlet Pressure Inlet Outlet (SCMH) Propane WC (bar) Setting, WC (bar) 988LP LP ,000 (9.01) 1/2 NPT 998LP ,000,000 (11.26) 1/2 NPT 998LP LP - 28* 1,400,000 (15.76) 3/4 NPT 998LP /4 NPT 998LP ,000 (10.36) 3/4 NPT LAT 998LP /2 NPT 998LP ,000,000 (11.26) 3/4 NPT LP - 29* 3/4 NPT 998LP /4 NPT 2,300,000 (25.89) 998LP NPT 1 NPT *Vent-hole in line with the outlet fitting (22-32) 11 (27) The 988LP Series Regulator reduces the pressure coming from a first stage regulator directly to the inlet pressure of the user appliance or to a medium pressure value in case of installations with pressure governors. These regulators are designed for Type A installations and are to be used outdoors in correct mounting position with vent-hole turned downwards. In the standard version these regulators are delivered with vent-hole in line with the inlet fitting. Three other configurations of the inlet and outlet fittings for the 998 LP model are available: Back Mount 998 LP-03, 998 LP-04 and 998LP-29 Angle Body 998 LP-05 In line inlet and outlet Flange 998 LP-09 and 998LP-10 TECHNICAL SPECIFICATIONS: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: 5-15 PSIG; Cover and Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 10 PSIG, 140,000 BTU, outlet pressure 11 inch WC; Provided Flows: Flow based on 10 PSIG (0.69 bar) inlet pressure and 20% drop (in accordance with UL144 standard) LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 11

17 REGULATORS Second Stage Regulators with Incorporated Dielectric Union CAVAGNA GROUP Capacities in BTU\HR Outlet Pressure Outlet Pressure Inlet Outlet (SCMH) Propane WC (bar) Setting, WC (bar) 988LP ,000 (9.01) 998LP /2 NPT 998LP ,000,000 (11.26) 1/2 NPT 998LP - 41* 998LP ,400,000 (15.76) 3/4 NPT LP - 32 (22-32) 3/4 NPT 998LP ,000 (10.36) 3/4 NPT LAT 998LP /2 NPT 998LP - 42* 1,000,000 (11.26) 3/4 NPT 90 3/4 NPT 998LP TP ,000 (7.88) 1/2 NPT 1/2 NPT Non-adjustable 998TP ,680,000 (18.91) 3/4 NPT 3/4 NPT 998TP ,500,000 (16.88) 3/4 NPT PSIG ( bar) 998TP ,460,000 (16.43) 1/2 NPT 1/2 NPT *Vent-hole in line with the outlet fitting. 11 (27) 2 PSIG (0.14 bar) The Guardian KOSAN+ Regulator incorporates a dielectric insulation and is an all-in-one solution. There is no need to buy separate dielectric unions. In Accordance with NFPA 58: Underground metallic piping, tubing, or both that convey LP-Gas from a gas storage container shall be provided with dielectric fittings at the building to electrically isolate it from the above ground portion of the fixed piping system that enters a building. Such dielectric fitting shall be installed above ground and outdoors. 998LP Type A TECHNICAL SPECIFICATIONS FOR LP TYPE: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: 5-15 PSIG; Cover and Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 10 PSIG, 140,000 BTU, outlet pressure 11 inch WC; Provided Flows: Flow based on 10 PSIG (0.69 bar) inlet pressure and 20% drop (in accordance with UL144 standard) TECHNICAL SPECIFICATIONS FOR TP TYPE: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: 5-15 PSIG; Cover and Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 10 PSIG, 140,000 BTU, outlet pressure 2 PSIG; Provided Flows: Flow based on 10 PSIG (0.69 bar) inlet pressure and 20% drop (in accordance with UL144 standard) Twin Stage Regulators CAVAGNA GROUP Capacities in BTU\HR Outlet Pressure Outlet Pressure Inlet Outlet (SCMH) Propane WC (bar) Setting, WC (bar) 988TW /2 NPT 988TW - 16* 750,000 (8.44) 998TW /4 NPT 998TW TW - 12* 1,400,000 (15.76) 3/4 NPT 988TW TW TW - 18* 750,000 (8.44) POL 1/2 NPT 998TW TW TW - 14* 1,400,000 (15.76) 3/4 NPT 988TW ,000 (16.43) 998TW ,460,000 (16.43) 1/4 NPT 3/4 NPT *First and Second Stage spring case vents opposite gauge taps (22-32) 11 (27) PSIG bar) PSIG ( bar) 2 PSIG (0.14 bar) 2 PSIG (0.14 bar) 988TW Type sales@mtankco.com

18 REGULATORS Twin Stage Regulators (continued) CAVAGNA GROUP The 998TW Type Double Stage Regulator (Twin Stage) consists of two regulation levels, which regulates the inlet pressure, coming from the withdrawal cylinder or tank directly to the inlet pressure of the user appliance. A 998TW Type 988 TW Type regulators are designed for Type B installation. They are to be used outdoors in correct mounting position with vent-hole turned downwards. TECHNICAL SPECIFICATIONS: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: PSIG; Cover and Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 10 PSIG, 140,000 BTU, Outlet pressure: 11 inch WC; Provided Flows: Flow based on 10 PSIG (0.69 bar) inlet pressure and 20% drop (in accordance with UL144 standard); 988TW Type Dimensions: L x W 4.33 x H 4.94; 988TW Type Weight: oz.; 998TW Type Dimensions: L x W x H 4.964; 998TW Type Weight: oz. Automatic Changeover Regulators - 524AC Type CAVAGNA GROUP Capacities in BTU\hr (SCMH) Propane Inlet Outlet Vent Size 524AC 600,000 (6.75) 1/2 NPT 3/4 NPT 528B 450,000 (5.07) 1/4 Inverted Flare 3/8 NPT 3/8 NPT 924N 160,000 (1.80) 3/8 NPT 524AC Type The Double Stage Automatic Changeover Regulator 524 AC is a combination of an automatic changeover working as a first stage coupled to a second stage regulator. The regulator body is made of zinc alloy and it is necessary to use the proper plastic mounting bracket. Please contact your sales representative for additional information. 524 AC TYPE TECHNICAL SPECIFICATIONS: Body and Cover: ZAMAK; Diaphragm: Reinforced; Supplying Pressure: PSIG; Cover Screws: Stainless steel; Fittings: Brass; Gas: Propane; Setting Point: Inlet pressure 100 PSIG, 140,000 BTU, outlet pressure: 11 WC; Provided Flows: Flow based on 25 PSIG (1.725 bar) inlet pressure and 20% drop (in accordance with UL144 standard); Dimensions: L x W x H B Type 528B TYPE TECHNICAL SPECIFICATIONS: Body and Cover: ZAMAK; Diaphragm: Reinforced; Supplying Pressure: PSIG; Fittings: Brass; Gas: Propane; Setting Point: Inlet pressure 100 PSIG, 140,000 BTU, outlet pressure: 11 WC; Provided Flows: Flow based on 25 PSIG (1.725 bar) inlet pressure and 20% drop (in accordance with UL144 standard); Dimensions: L x W x H N TYPE TECHNICAL SPECIFICATIONS: Body and Cover: ZAMAK; Supplying Pressure: PSIG; Fittings: Brass; Gas: Propane; Setting Point: Inlet pressure 100 PSIG, 70,000 BTU, outlet pressure: 11 WC; Provided Flows: Flow based on 25 PSIG (1.725 bar) inlet pressure and 20% drop (in accordance with UL144 standard); Dimensions: L x W 3.11 x H N Type LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 13

19 REGULATORS 2-PSIG Regulators CAVAGNA GROUP Capacities in BTU\HR Outlet Adjustment Outlet Pressure Inlet Outlet (SCMH) Propane Range PSIG (bar) Setting, PSIG (bar) 988TP ,000 (7.88) 1/2 NPT 1/2 NPT 998TP ,680,000 (18.91) 3/4 NPT (0.14) 3/4 NPT 998TP ,500,000 (16.88) 3/4 NPT 90 ( ) 998TP ,460,000 (16.43) 1/2 NPT 1/2 NPT 988 TP Regulators are designed for Type C of installations. They are to be used outdoors in correct mounting position with vent-hole turned downwards. In the standard version 988 TP regulators are delivered with the vent-hole turned in line with the outlet fitting. There is a special configuration of inlet and outlet fittings for the 998 TP model: Back Mount 998 LP-07 TECHNICAL SPECIFICATIONS: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: 5-15 PSIG; Cover and Inlet Fitting Screws: Stainless Steel; Gas Type: Propane; Setting Point: Inlet Pressure 10 PSIG, 140,000 BTU, Outlet Pressure: 2 PSIG; Provided Flows: Flow based on 10 PSIG (0.69 bar) inlet pressure and 20% drop (in accordance with UL144 standard) 988TP Type L x W 4.33 x H TP Type L x W x H A POL Double Stage CAVAGNA GROUP Capacities in BTU\HR (SCMH) Propane Inlet Outlet 524AS 160,000 (1.80).880 POL 3/8 NPT TECHNICAL SPECIFICATIONS: Type: ASME double stage regulator; Body and Cover Material: ZAMAK; Diaphragm: Reinforced; Supplying Pressure: PSIG; Fittings: Brass; Gas: Propane; Setting Point: Inlet pressure 100 PSIG, 70,000 BTU, outlet pressure: 11 WC; Provided Flows: Flow based on 25 PSIG (1.725 bar) inlet pressure and 20% drop (in accordance with UL144 standard); Dimensions: L x W 3.11 x H AS Type sales@mtankco.com

20 REGULATORS Governor Regulator - Type 90/2-PSIG - Pressure Drop CAVAGNA GROUP A Type 90 / 2-PSIG Pressure 7.0 PSIG= 1/2 PSIG= 3/4 PSIG= 1 PSIG= Drop 17 mbar 34.5 mbar 52 mbar 69 mbar Flow Rate CFH (m3/h) (4.3) (6.1) (7.8) (8.7) Pressure Drop sp gr gas expressed in CFH (m3/h) Governor Regulator - Type 90/2-PSIG - Capacities Model Flow Rate CFH (m3/h] CAVAGNA GROUP Outlet 1/2 PSIG= 3/4 PSIG= 1 PSIG= 2 PSIG= 5 PSIG= Pressure 34.5 mbar 52 mbar 69 mbar 138 mbar 345 mbar 6 WC 160 (4.5) 200 (5.6) 235 (6.6) 285 (8.0) 350 (9.8) 7 WC 155 (4.3) 200 (5.6) 230 (6.4) 280 (7.8) 345 (9.7) 8 WC 155 (4.3) 195 (5.5) 230 (6.4) 270 (7.6) 335 (9.4) 9 WC 145 (4.1) 190 (5.3) 215 (6.0) 260 (7.3) 325 (9.1) 10 WC 135 (3.8) 180 (5.0) 205 (5.7) 245 (6.7) 310 (8.7) 11 WC 125 (3.5) 170 (4.8) 195 (5.5) 235 (6.6) 300 (8.4) 12 WC 125 (3.5) 165 (5.5) 195 (5.5) 230 (6.4) 295 (8.3) Capacities based on 1 WC pressure drop from set point 0.64 sp gr gas expressed in CFH (m3/h) Governor Regulator Type 90/2-PSIG - Conversion Table CAVAGNA GROUP Model Item Pipe Inlet Number Size Pressure Setting NG LPG PSIG WC PSIG WC PSIG WC /2 2 PSIG WC PSIG WC PSIG WC PSIG WC The Type 90 OARA Pressure Regulators are manufactured to supply the highest performances both as line pressure regulators and as gas appliance regulators. All models are approved by IAS, in accordance with the two different standards. FEATURES: Precise regulating control of both full flow and of tiny pilot flows Fulfills utility specifications for usage in residential, commercial and industrial applications All component parts are corrosion-resistant Diaphragm and washers are made of Nitrile rubber and are resistant to combustible gases Rubber works at ambient temperatures of - 40/205 F (-40/96 C) Rugged die-cast aluminium housings Regulators have vent limiter type thread 1/8 NPT which limits gas leakage in case of diaphragm rupture Manufacturing of the regulators in terms of balancing capacity guarantees excellent control of the outlet pressure TECHNICAL SPECIFICATIONS: Rated Inlet Pressure: 2 PSIG (138 mbar); Outlet Pressure Setting: Type WC; Type WC; Type WC; Type WC; Type WC.; Gases: Natural or LP gas; Code: The four digit code indicates the year and the calendar week, in which the regulator was manufactured; (i.e. 1012: in twelfth week of 2010); Ambient Temp. Range: -40/205 F (-40/96 C); Pipe size NPT: x ; Venting: Vent limiter /8 NPT; Emergency Exposure Limits: 65 PSIG (4.5 BAR) inlet side only; Dimensions: L x W x H 3.492; Weight: oz. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 15

21 REGULATORS Governor Regulators - Type 95/2-PSIG - Pressure Drop CAVAGNA GROUP Pressure 7.0 PSIG= 1/2 PSIG= 3/4 PSIG= 1 PSIG= Drop 17 mbar 34.5 mbar 52 mbar 69 mbar Flow Rate CFH (m3/h) (10.1) (14.3) (17.7) (20.3) Pressure Drop sp gr gas expressed in CFH (m3/h) Governor Regulators - Type 95/2-PSIG - Capacities CAVAGNA GROUP Model Outlet 1/2 PSIG= 3/4 PSIG= 1 PSIG= 2 PSIG= 5 PSIG= Pressure 34.5 mbar 52 mbar 69 mbar 138 mbar 345 mbar 95 7 WC 364 (10.3) 403 (11.4) 447 (12.7) 517 (14.6) 645 (18.3) 8 WC 359 (10.2) 394 (11.2) 447 (12.7) 509 (14.4) 636 (18.0) 9 WC 342 (9.7) 381 (10.8) 430 (12.2) 500 (14.2) 636 (18.0) 10 WC 329 (9.3) 377 (10.7) 403 (11.4) 496 (14.0) 627 (17.8) 11 WC 302 (8.5) 360 (10.2) 372 (10.5) 473 (13.4) 614 (17.8) CAPACITIES based on 1 WC pressure drop from set point 0.64 sp gr gas expressed in CFH (m3/h) Type 95 / 2-PSIG A Governor Regulators - Type 95/2-PSIG - Conversion Table CAVAGNA GROUP Model Item Pipe Inlet Number Size Pressure Setting NG LPG PSIG WC /4 2 PSIG WC PSIG WC PSIG WC The Type 95 OARA Pressure Regulators are manufactured to supply the highest performances both as line pressure regulators and as gas appliance regulators. All models are approved by IAS, in accordance with the two different standards. FEATURES: Precise regulating control of both full flow and of tiny pilot flows Fulfills utility specifications for usage in residential, commercial and industrial applications Materials of all component parts are corrosion-resistant Diaphragm and washers are made of Nitrile rubber and are resistant to combustible gases Rubber is selected to work at the following ambient temperatures: - 40/205 F (-40/96 C) Rugged die-cast aluminium housing Brass vent limiter Regulators have vent limiter type thread 1/8 NPT which limits gas leakage in case of diaphragm rupture Manufacturing of the regulators in terms of balancing capacity guarantees excellent control of the outlet pressure TECHNICAL SPECIFICATIONS: Rated Inlet Pressure: 2 PSIG (138 mbar); Outlet Pressure Setting: Type WC.; Type WC.; Outlet Pressure Setting: Type at 200 CFH; Type at 200 CFH; Gases: Natural or LP gas; Code: The four digit code indicates the year and the calendar week, in which the regulator was manufactured (i.e. 1012: in twelfth week of 2010); Ambient Temp. Range: -40/205 F (-40/96 C); Pipe Size NPT: x / 1 x 1 ; Venting: Vent limiter /8 NPT; Emergency Exposure Limits: 65 PSIG (4.5 BAR) inlet side only; Dimensions: L x W x H 5.196; Weight: oz sales@mtankco.com

22 REGULATORS Direct Operated Regulators - 94HP Type CAVAGNA GROUP A Inlet/Outlet Outlet Outlet Capacity Description Connection Pressure Adjustment BTU/HR Setting (PSIG) Range (PSIG) 942HP ,600, HP ,600,000 1/2 NPT 942HP - 05 Basic Regulator ,200, HP ,250, HP ,800,000 3/4 NPT 942HP ,500, HP ,600, HP - 02 With Internal 1/2 NPT ,000, HP - 03 Relief Valve ,600, HP /4 NPT ,800,000 94HP Type The 94 Series Direct Operated Regulators are designed for high-pressure service and can be used on either on vapor or liquid applications. Outlet pressure ranges from PSIG. High pressure regulators reduce tank pressure to a lower pressure for use by another regulator. They may also be used for final stage service on specific applications such as high pressure burners or other medium sized commercial industrial applications. It is not equipped with limited relief valve. Type 9482HP Regulator is an adjustable high pressure regulator with a wide range of outlet pressures. It is equipped with a limited relief valve. Both types are equipped with a FNPT side outlet which is normally plugged and provides an opening for an outlet pressure. TECHNICAL SPECIFICATIONS: Body and Cover: Aluminum; Diaphragm: Reinforced; Supplying Pressure: PSIG; Cover Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 100 PSIG, 350,000 BTU, outlet pressure 20 PSIG; Provided Flows: Flow based on inlet pressure 20 PSIG (1.38 bar) greater than outlet with 20% drop (in accordance with UL144 standard); Dimensions: L 4.33 x W 4.72 x H 8.26 Direct Operated Regulators - 81HP Type CAVAGNA GROUP Orifice Inlet/Outlet Outlet Pressure Outlet Pressure Capacity Connection Range (PSIG) Setting BTU/HR 812HP /8 3/4 NPT 6,100, HP /2 3/4 NPT 10,700, HP /2 1 NPT 10,700, HP - 02² 1/2 1 NPT 5-20 PSIG 10 PSIG 10,700, HP - 02³ 1/2 3/4 NPT 10,700, HP - 01³ 1/2 1 NPT 10,700, HP - 11¹ 3/8 3/4 NPT 6,100, HP /2 2 NPT 10,700,000 ¹ = Has Internal Relief ² = Fluorocarbon Trim (GLT Viton) ³ = w/monitoring 81HP Type The 81 Series Direct Operated Regulators are designed for high-pressure service with large loads like factories, office buildings, etc. They reduce tank pressure to an intermediate pressure for use by another regulator. They are also used for final stage service on particular application (pounds to pounds). The 81HP series has a wide range of outlet pressures and can be equipped with a limited relief valve. They have a FNPT side outlet which is normally plugged and provides an opening for an outlet pressure gauge. Type 81 regulators can be equipped with Viton trim. TECHNICAL SPECIFICATIONS: Body and Cover: Aluminum; Diaphragm: Reinforced; Supplying Pressure: PSIG; Cover and Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 100 PSIG, 350,000 BTU, outlet pressure 10 PSIG; Provided Flows: Flow based on inlet pressure 20 PSIG (1.38 bar) greater than outlet with 20% drop (in accordance with UL144 standard); Dimensions: L 7.67 x W 4.72 x H 9.33 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 17

23 REGULATORS Direct Operated Regulators - 49HP Type CAVAGNA GROUP Outlet Description Outlet Capacity Pressure Adjustment BTU/HR Setting (PSIG) Range (PSIG) 492HP , HP ,000 Basic Regulator 492HP - 03 (Handwheel ,200, HP - 04 Adjustment) ,000, HP - 05* , HP , HP - 01 Basic Regulator , HP - 03 (Wrench ,200, HP - 04 Adjustment) ,000, HP - 05* , HP , HP - 01 Non-adjustable 15 Non-adjustable 400, HP , HP , HP - 02 Dial Cap , HP - 03 Adjustment ,200,000 *Inlet M POL The 49 Series Direct Operated Regulators are designed for high-pressure service and can be used on either vapor or liquid applications. Their outlet pressure ranges from PSIG. High pressure regulators usually reduce tank pressure to an intermediate pressure for use by another regulator. NOTE: 49 Series Regulators do not have internal relief valves, and can not be installed in fixed piping serving 0.5 appliance systems. The 492HP Regulator is an adjustable high pressure regulator with hand wheel adjustment. The 493HP Regulator is an adjustable high pressure regulator with wrench adjustment and 3 spring ranges from PSIG. The 494HP is a fixed high pressure regulator, has no field adjustment, and is very compact. Type 495HP Regulator is an adjustable high pressure regulator with a dial cap adjustment. This cap eliminates the need for a gauge on portable applications. Type 492 Type 493 Type 494 Type 495 A TECHNICAL SPECIFICATIONS: Body and Cover: Aluminum; Diaphragm: Reinforced; Supplying Pressure: PSIG; Cover Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 100 PSIG, 200,000 BTU, outlet pressure 20 PSIG; Provided Flows: Flow based on inlet pressure 20 PSIG (1.38 Bar) greater than outlet with 20% drop (in accordance with UL144 standard); Dimensions: L 2.56 x W 2.89 x H 4.88 For more information on Cavagna Group products or installation instructions contact your MTankCo. representative or go to sales@mtankco.com

24 PIGTAILS & HOGTAILS Copper Pigtails and Hogtails A Long Nipple Short Nipple 1/4 Inverted Flare 1/4 MNPT Part No. Description Approx. 1/4 Tube OD 3/8 Tube OD Length Long Nipple Short Nipple Long Nipple Short Nipple Male Hard Nose POL x Male Hard Nose POL, 7/8 Nut Male Hard Nose POL x Male Hard Nose POL, 1-1/8 Nut 1/4 Male Inverted Flare x Male Hard Nose POL, 7/8 Nut 1/4 Male Inverted Flare x Male Hard Nose POL, 1-1/8 Nut 1/4 MNPT x Male Hard Nose POL, 7/8 Nut 6 ME ME1680L-06 ME ME * ME * ME1680L-12* ME * 20 ME * ME * ME1680L-20* ME * 30 ME ME ME1680L-30 ME ME ME ME1680L-36 ME ME ME ME1680L-48 ME ME ME1680HD ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME * ME * ME1689L-12 ME ME ME * 20 ME * ME ME1689L-20 ME ME ME ME1689L-30 ME ME ME ME ME ME ME1689L-48 ME /4 MNPT x Male Hard 20 ME1679HD-20 Nose POL, 1-1/8 Nut 48 ME1679HD-48 1/2 MNPT x Male Hard 12 ME1684L-12 ME Nose POL, 7/8 Nut 20 ME1684L-20 ME * NOTE: Dielectric option available. Add D after the prefix part number i.e. ME1662D-12 Male Hard Nose POL, 7/8 Nut Dielectric Version Pigtail and Hogtail Assemblies come with two brass connectors brazed onto a heavy wall annealed copper tube with a 250 PSIG pressure rating. The 1/4 has a pull test rating of 500 and the 3/8 tube has a pull test rating of 750 pounds. Listed and tested in accordance with UL 569. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed. *ME1600D Series Dielectric Pigtails/Hogtails are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/hogtail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 19

25 PIGTAILS & HOGTAILS, INTERNAL VALVES Bent Copper Pigtails and Hogtails Item Number Approx. Length 1/4 Tube OD Short Nipple 3/8 Tube OD Short Nipple 90º 90º 270 Right 360 Male Hard Nose POL x Male Hard Nose POL, 12 ME B90 ME B270R ME B360 7/8 Nut 1/4 MNPT x Male Hard 5 ME1669-5B90 ME1689-5B90 Nose POL, 7/8 Nut 6 ME1669-6B90 ME1689-6B Bend Right Hand 90 Bend INTERNAL VALVES B 1-1/4 Threaded Internal Valve ME X ME990A-10- X ME990AR-10- X ME990M-10- X Description Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - Only Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - with Pnuematic Actuator Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - with Rotary Actuator Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - with Manual Latch To order Kalrez add K for Kalrez after the prefix part number i.e. ME990K To order Neoprene add N for Neoprene after the prefix part number i.e. ME990N To order Viton add V for Viton after the prefix part number i.e. ME990V Viton and Kalrez are trademarks of DuPont Performance Elastomers. X 1-1/4 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow * For NH 3 multiply GPM by.90 NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME (85 GPM) ME Series Marshall Excelsior 1-1/4 Threaded Internal Valves are intended for use on bobtail trucks and storage tanks with 1-1/4 threaded connections in directional or bidirectional flow applications. Provides both manual shut-down and excess flow, closing in the event of the piping being separated from the valve. May be equipped with manual latch, pneumatic or rotary actuator, open/closing devices. Valves are equipped with a break-away feature in the cast body which permits the piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. For liquid or vapor service applications. FEATURES: Cast steel body with powder coat finish All stainless internal component construction Precision machined hard coated stem Fully retained Nitrile seat disc Large variety of excess flow closing values Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals UL Listed for LPG and NH 3 service Available with 316 Stainless Steel Body Rulon TM bearing on stub shaft sales@mtankco.com

26 INTERNAL VALVES 2 & 3 Threaded Internal Valve ME X ME990A-16- X ME990AR-16- X ME990M-16- X ME X ME990A-24- X ME990AR-24- X ME990M-24- X Description Excelerator TM 2 MNPT x 2 FNPT Internal Valve - Only Excelerator TM 2 MNPT x 2 FNPT Internal Valve - with Pnuematic Actuator Excelerator TM 2 MNPT x 2 FNPT Internal Valve - with Rotary Actuator Excelerator TM 2 MNPT x 2 FNPT Internal Valve - with Manual Latch Excelerator TM 3 MNPT x 3 FNPT Internal Valve - Only Excelerator TM 3 MNPT x 3 FNPT Internal Valve - with Pnuematic Actuator Excelerator TM 3 MNPT x 3 FNPT Internal Valve - with Rotary Actuator Excelerator TM 3 MNPT x 3 FNPT Internal Valve - with Manual Latch ME990M-16 Series To order Kalrez add K for Kalrez after the prefix part number i.e. ME990K To order Neoprene add N for Neoprene after the prefix part number i.e. ME990N To order Viton add V for Viton after the prefix part number i.e. ME990V B Viton and Kalrez are trademarks of DuPont X 3 Valve Liquid Closing Flow Values Performance Elastomers GPM LPG Closing Flow NOTE: Indicate desired excess flow closing value GPM LPG Closing Flow when ordering - see chart for values i.e GPM LPG Closing Flow ME (250 GPM) GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow X 2 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow ME Series Marshall Excelsior s 2 and 3 Threaded Internal Valves are intended for use on transport trucks and large storage tanks with 2 or 3 threaded connections in directional or bidirectional flow applications. Provides both manual shut-down and excess flow closing in the event of the piping being separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. For liquid or vapor service applications. FEATURES: Durable ductile body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem Fully retained Nitrile seat disc Largest variety of excess flow closing values Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals UL listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 21

27 INTERNAL VALVES 2 & 3 Flanged Internal Valve ME990S-2F-16- X ME990SA-2F-16- X ME990SAR-2F-16- X ME990SM-2F-16- X ME990S-3DF- X ME990SA-3DF- X ME990SAR-3DF- X ME990S-3DFM- X ME990SA-3DFM- X ME990SAR-3DFM- X ME990S-3F-24- X ME990SA-3F-24- X ME990SAR-3F-24- X Description Excelerator TM lb. Modified Single Flange Internal Valve - Only Excelerator TM lb. Modified Single Flange Internal Valve - with Pneumatic Actuator Excelerator TM lb. Modified Single Flange Internal Valve - with Rotary Actuator Excelerator TM lb. Modified Single Flange Internal Valve - with Manual Latch Excelerator TM 3 - Double Flange Bobtail Internal Valve - Only Excelerator TM 3 - Double Flange Bobtail Internal Valve - with Pneumatic Actuator Excelerator TM 3 - Double Flange Bobtail Internal Valve - with Rotary Actuator Excelerator TM lb. Modified Double Flange Internal Valve - Only Excelerator TM lb. Modified Double Flange Internal Valve - with Pneumatic Actuator Excelerator TM lb. Modified Double Flange Internal Valve - with Rotary Actuator Excelerator TM lb. Modified Single Flange x 3 FNPT Internal Valve - Only Excelerator TM lb. Modified Single Flange x 3 FNPT Internal Valve - with Pneumatic Actuator Excelerator TM lb. Modified Single Flange x 3 FNPT Internal Valve - with Rotary Actuator X 2 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 To order Kalrez add K for Kalrez after the prefix part number i.e. ME990SK-SDF-300 To order Neoprene add N for Neoprene after the prefix part number i.e. ME990SN-SDF-300 To order Viton add V for Viton after the prefix part number i.e. ME990SV-SDF-300 Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME990S-3SF-250 (250 GPM) B Intended for use on bobtail delivery trucks, transport trucks and large storage tanks with 2 or 3 flanged connections in directional or bidirectional flow applications. Provides both manual shut-down and excess flow closing in the event of the piping being separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the pump or piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. ME990S-3F-24 Series FEATURES: Durable steel body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem and stem guide Fully retained Nitrile seat disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals Available with 316 Stainless Steel bodies UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts ME990S-3DF Series sales@mtankco.com

28 INTERNAL VALVES 4 Flanged Internal Valves ME990-4F- X ME990A-4F- X ME990AR-4F- X ME990M-4F- X Description Excelerator TM 4 Single Flange Internal Valve - only Excelerator TM 4 Single Flange Internal Valve - with Pneumatic Actuator Excelerator TM 4 Single Flange Internal Valve - with Rotary Actuator Excelerator TM 4 Single Flange Internal Valve - with Manual Latch B ME990-4F Series For #5 Mesh screen add/5 e.i. ME990-4F-650/5 To order Kalrez add K for Kalrez after the prefix part number i.e. ME990AK-4F-500 To order Neoprene add N for Neoprene after the prefix part number i.e. ME990AN-4F-500 To order Viton add V for Viton after the prefix part number i.e. ME990AV-4F-500 Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME990-4F-650 (650 GPM) X 4 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow ,250 GPM LPG Closing Flow ,500 GPM LPG Closing Flow *For NH 3 Multiply GPM by.90 4 Flanged Internal Valves are for use on transport trucks and large storage tanks with 4 flanged connections in directional or bidirectional flow applications. The all stainless construction valves provide manual shut-down and excess flow closing should the piping become separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator open/closing devices. FEATURES: Precision machined stem and stem guide Fully retained disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs Available with standard or #5 mesh filter screen Removable data plate Threaded packing gland with seal ejector spring Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 23

29 INTERNAL VALVES 3 Double Flanged Off-Set Internal Valves Description ME990S-3DFO- X Offset Bobtail Internal Valve - Only ME990SA-3DFO- X Excelerator TM 3 Double Flange Offset Bobtail Internal Valve (Pneumatic Actuator) ME990SAR-3DFO- X Excelerator TM 3 Double Flange Offset Bobtail Internal Valve (Rotary Actuator) To order Kalrez add K for Kalrez after the prefix part number i.e. ME990SK-3DFO-300 To order Neoprene add N for Neoprene after the prefix part number i.e. ME990SN-3DFO-300 To order Viton add V for Viton after the prefix part number i.e. ME990SV-3DFO-300 Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME990S-3DFO-250 (250 GPM) X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow * For NH 3 Multiply GPM by.90 The 3 Double Flanged Off-Set Internal Valves are intended for use on bobtail delivery trucks with 3 flanged connections in directional or bidirectional flow applications. The 3 offset outlet flange prevents pump installation interference with truck frame rails, cross members, PTO covers, drive shafts, and other common obstacles when remounting bobtail vessels onto new chassis. In order to reduce the amount of offset from the 2 maximum to 1-1/4, simply rotate the inlet flange connection by 1 bolt hole either direction. To eliminate the offset entirely, simply rotate 1 more bolt hole. The Excelerator TM offset is equipped with three separate packing gland locations to prevent interference while mounting the valve actuator regardless of how you choose to mount the valve. Provides both manual shut-down and excess flow closing in the event of the valve being separated from the tank. Can be equipped with pneumatic or rotary actuator open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the pump or piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. ME990-4F Series B FEATURES: Body outlet flange offset 2 from inlet flange Standard with 3 gland ports for stem relocation (2 plugged) Each gland port can accept pneumatic or rotary type actuators Durable steel body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem and stem guide Fully retained Nitrile seat disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals Available with 316 Stainless Steel bodies UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts sales@mtankco.com

30 INTERNAL VALVES 2 & 3 Threaded Tee Body Internal Valves Description ME X Excelerator TM 2 MNPT x 2 FNPT Tee Body Internal Valve - Only ME992A-16- X Excelerator TM 2 MNPT x 2 FNPT Tee Body Internal Valve - with Pnuematic Actuator ME992AR-16- X Excelerator TM 2 MNPT x 2 FNPT Tee Body Internal Valve - with Rotary Actuator ME992M-16- X Excelerator TM 2 MNPT x 2 FNPT Tee Body Internal Valve - with Manual Latch ME X Excelerator TM 3 MNPT x 3 FNPT Tee Body Internal Valve - Only ME992A-24- X Excelerator TM 3 MNPT x 3 FNPT Tee Body Internal Valve - with Pnuematic Actuator ME992AR-24- X Excelerator TM 3 MNPT x 3 FNPT Tee Body Internal Valve - with Rotary Actuator ME992M-24- X Excelerator TM 3 MNPT x 3 FNPT Tee Body Internal Valve - with Manual Latch B ME990M-16 2 NTP Tee Body Internal Valve w/ Manual Latch X 2 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow To order Kalrez add K for Kalrez after the prefix part number i.e. ME992K To order Neoprene add N for Neoprene after the prefix part number i.e. ME992N To order Viton add V for Viton after the prefix part number i.e. ME992V Viton and Kalrez are trademarks of DuPont Performance Elastomers. X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow * For NH 3 Multiply GPM by.90 Side discharge increases differential to close by approximately 2 PSIG NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME (250 GPM) The 2 and 3 Threaded Tee Body Internal Valves are intended for use on transport trucks and large storage tanks with 2 or 3 threaded connections in directional or bidirectional flow applications. They provide manual shut-down and excess flow closing should a pipe separate from the valve. A manual latch, pneumatic or rotary actuator open/closing devices are available. All valve models have a break-away feature in the cast body allowing the piping to shear off in the event of side impact, leaving the valve poppet intact. The tee body features an additional FNPT side discharge port. Valves are for liquid or vapor service applications. ME990M-24 3 NTP Tee Body Internal Valve w/ Manual Latch FEATURES: Ductile body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem Fully retained Nitrile seat disc Largest variety of excess flow closing values Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 25

31 INTERNAL VALVES Threaded Internal Valves CAVAGNA GROUP Inlet Outlet Closing Flow GPM Propane LPG Vapour Capacity Closing Flow Material Connection Connection Half Full (SCFH/Propane) GPM Ammonia One Way Two ways Coupling Coupling 25 PSIG 100 PSIG NH 3 + LPG /4 M NPT 1-1/4 F NPT 30 5,800 9, /4 M NPT 1-1/4 F NPT , /4 M NPT 1-1/4 F NPT ,950 18, M NPT 2 F NPT ,550 36, M NPT 2 F NPT ,600 57, Steel 2 M NPT 2 F NPT M NPT 3 F NPT ,600 48, M NPT 3 F NPT ,500 73, M NPT 3 F NPT ,500 87, M NPT 3 F NPT , , M NPT 3 F NPT Cavagna s Threaded Internal Valves, designed as primary shut-offs to control product discharge in LP-Gas service, are predominantly used in the liquid and vapour openings of bobtail and other transport vehicles. All valves satisfy the requirements of NFPA 58 and can also be used in stationary storage tank applications. All internal valves have a robust, one-piece body design and an incorporated excess flow function. Each valve has a weak section that allows the pump or piping to shear in the event of an accident, thereby leaving the valve mechanism intact. Cavagna threaded valves are compact and can be operated either manually or remotely via cable or pneumatic control. Valves contain spring-loaded, PTFE packing providing excellent leakage protection and the standard disc material provided is Nitrile. B 1-1/4 Threaded Internal Valve Flanged Internal Valve 3 CAVAGNA GROUP Inlet Outlet Closing LPG Vapor Capacity Closing Flow Material Flow GPM (SCFH/Propane) Connection Connection GPM Ammonia Single Double Propane 25 PSIG 100 PSIG NH 3 + LPG ,100 42, ,900 62, lb. ANSI RF lb Steel ,200 71, Modified (4-7/8 ) ANSI RF , , Cavagna flanged valves, equipped with a built-in excess flow valve to prevent uncontrolled product release, are perfect for mounting a pump or other similar piping connections. Mounting bolts weakened section, provided, allow the pump or piping to shear in the event of an accident, thereby leaving the valve intact. Cavagna flanged valves have a protection filter to avoid pump contamination from dirt and particles, easily removable when the valve is installed on the filling piping line. Cavagna flanged valves contain PTFE packing providing excellent leakage protection and the standard disc material provided is Nitrile, they can be operated manually or remotely via cable or pneumatic control. 3 Flanged Internal Valve 3 Double Flanged Internal Valve sales@mtankco.com

32 INTERNAL VALVES & ACCESSORIES Flanged Internal Valve 4 CAVAGNA GROUP Material Inlet Outlet Closing Flow Connection Connection GPM Propane lb. ANSI RF lb Steel Modified (4-7/8 ) ANSI RF ,000 4 Flanged Internal Valve Cavagna Flanged Internal 4 Valves come equipped with a built-in excess flow valve to prevent uncontrolled product release, and are ideal for mounting a pump or other similar piping connections. Mounting bolts allow piping to shear in the event of an accident, leaving the valve intact. Flanged valves have a protection filter to avoid pump contamination from dirt, contain PTFE packing to provide excellent leakage protection, disc material is Nitrile, and can be operated manually or remotely via cable or pneumatic control. B ME Latches ME MEP MEP990-4F Description Excelerator TM Manual Latch Assembly for 1-1/4 Threaded Internal Valves Excelerator TM Manual Latch Assembly for ME and Series Excelerator TM Manual Latch Assembly for ME990-4F Series MEP MEP990-4F Releases MEP650 MEP651 Description Excelerator TM Open/Close Cable Control Release with 50 Cable Excelerator TM Open/Close Cable Control Release - Only MEP651 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 27

33 INTERNAL VALVE ACCESSORIES Flanged Internal Valve Accessories for 3 Single Flanged Valve CAVAGNA GROUP Description Screws - 3/4-10 UNC Nuts (8 Up + 8 Down) 3/4-10 UNC Upper Gasket Lower Gasket Screws - M 20 x 2, Nuts (8 Up + 8 Down) M 20 x Screws 1 Upper Gasket 16 Nuts (8 up and 8 down) 1 Lower Gasket Flanged Internal Valve Accessories for 3 Double Flanged Valve CAVAGNA GROUP B Description Screws (8 Up + 8 Down) 3/4-10 UNC Nuts (8 up + 8 down) 3/4-10 UNC Upper Gasket Lower Gasket 16 Screws (8 up and 8 down) 1 Upper Gasket 16 Nuts (8 up and 8 down) 1 Lower Gasket Flanged Internal Valve Accessories for 4 Single Flanged Valve Description Screws - 3/4-10 UNC Nuts (8 Up + 8 Down) 3/4-10 UNC Upper Gasket Lower Gasket 8 Screws CAVAGNA GROUP 1 Upper Gasket 16 Nuts (8 up and 8 down) 1 Lower Gasket sales@mtankco.com

34 INTERNAL VALVE ACCESSORIES Latch/Remote Release Mechanisms CAVAGNA GROUP Description Fuse Latch Threaded Internal Valve 2 and Fuse Latch Threaded Internal Valve 1-1/4 X 1-1/ Dual Latch/Remote Release for Internal Valve 1-1/4 X 1-1/ Manual Lever and Release for 4 Internal Valve ACTUATORS C Internal Valve Actuators Actuator Type Fits MEC* Fits Fisher* Internal Valve ME225 ME Fisher C /4 Threaded ME226 ME227 ME228 Direct Drive ME990-16, ME990-24, Fisher C402, C421, 2 and 3 ME990S-3F-24 C427, C471, C477 Threaded ME990S-3DF Fisher C and 3 Double ME990S-3DFM C Series Flange ME990-4F Fisher C and 4 Single C Series Flange *Also fits Cavagna Series internal valves Fisher and Fisher Internal Valves are the trademarks of Emerson Process Management Cavagna is the trademark of Cavagna Group ME225 W-ME Direct Drive Actuators are designed to maximize the life of the internal valve by eliminating side pressure on the valve s packing stem. These actuators are intended to be used at remote locations or operated directly off the air brake system in bobtail or transport applications. The low temperature factory installed seals allow these actuators to be used with air, nitrogen, carbon dioxide or LP-Gas vapor. In case of a fire, the factory-provided thermal plug melts at 212 F., releasing pressure allowing the internal valve to close. The factory set rotation of these actuators require no modification and can be oriented in any direction. ME227 FEATURES: Stainless steel all weather mounting hardware Field repairable under full tank pressure Anodized aluminum actuator body with easy to see open/close indicator No pinch points for operator safety Includes mounting bracket for ME707 Quick Release Valve NOTE: ME707 is not required for operation Installation hardware is provided LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 29

35 ACTUATORS Internal Valve Actuators ME205 ME205R ME206 ME207 Actuator Type Airstroke TM by Firestone Airstroke TM by Firestone #9 Chamber #9 Chamber Fits MEC* Fits* Internal Valve ME Fisher C /4 Threaded REGO A3209R 1-1/4 Threaded ME990-16, ME990-24, Fisher C402, C421, C471, 2 and 3 ME990S-3F-24 C427, C477 Threaded ME990S-3DF Fisher C Double ME990S-3DFM C Series Flange ME207SF #9 Chamber Fisher C Series 3 Single Flange Fisher ME208SF #24 Chamber ME990-4F C Single C Series Flange ME710 Airstroke TM REGO Flowmatic Three-Way Valve * Also fits Cavagna Series internal valves PowerStroke and FASTroke Actuators are designed with a heavy duty stainless steel frame to withstand the toughest conditions. These actuators are intended to be used at remote locations or operated directly off the air brake system in bobtail or transport applications. ME205 ME205R Smooth acting cam open the internal valve lever when air, nitrogen, or carbon dioxide is applied to the line. When line pressure is released, the internal valve automatically closes. In case of a fire, the thermal plug melts at 212 F, releasing pressure allowing the internal valve to close. FEATURES: Stainless steel all weather bracket Field repairable without complete disconnect from internal valve Repairable with common automotive brake chamber High gloss auto grade black epoxy coating Installation hardware is provided Standard disc material is Nitrile No modification required C ME710 ME206 ME208SF ME207 sales@mtankco.com

36 ACTUATORS Rotary Cams Actuators CAVAGNA GROUP 1-1/4 and 1-1/2 Actuator Fits O-205 Actuator 1-1/4 and 1-1/ O-206 Actuator 2 and O-207 SF Actuator 3 Single Flanged O-207 Actuator 3 Double Flanged O-208 SF Actuator 4 Single Flanged 2 and 3 Actuator Cavagna s Rotary Cams Actuators are pre-assembled, ready for quick installment, and can be attached to the valve in four separate positions. The direct drive design does not apply side load to internal valve stem packing, which maximizes valve life. An internal cam mechanism guarantees high performance, optimizing the opening torque. The return torque movement relies only on the spring and is independent from the supply pressure. The actuator guarantees complete opening of the valve and is equipped with a limit switch. FEATURES: 3 Single Flanged Actuator Immediate and automatic closing in absence of air (rapid discharge accessories are not needed) Open/close indicator Compact design and lightweight Stainless steel valve anchoring bracket Aluminum body, stainless steel and aluminum components Self-lubricating with PTFE carbon-graphite seals Operating media: compressed filtered air, not necessarily lubricated C 3 Double Flanged Actuator 4 Single Flanged Actuator 500,000 opening cycles guaranteed ACTUATORS ACCESSORIES Actuator Accessories Inlet Outlet ME707 3/8 FNPT 3/8 FNPT (2 Ports) ME708 1/4 FNPT 1/4 FNPT ME709 1/4 FNPT 1/4 MNPT ME707 ME707 - The quick release valve is used in conjunction with Marshall Excelsior s air actuators to decrease the response time when closing actuators. They are particularly effective when long distances (75 feet or more) exist between the actuator and the actuator control valve. ME707 - The PSIG air pressure regulator prolongs the life of the air actuator and air system by allowing the air pressure to be set and regulated at the minimum required operating pressure for each individual system. ME709 - The gas/air filter is used to filter foreign materials and/or particles from LP-Gas systems such as motor fuel/carburetion systems. These filters to be used on air supply lines for internal and emergency shutoff valve actuator systems. ME708 ME709 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 31

37 EMERGENCY SHUTOFF VALVES 3/4 & 1 Emergency Shutoff Valves Description Latch Type OAL ME /4 FNPT Emergency Shutoff Valve (ESV) Pneumatic 4-3/4 ME FNPT Emergency Shutoff Valve (ESV) Pneumatic 4-3/4 ME980C-6 3/4 FNPT Emergency Shutoff Valve (ESV) Cable 4-3/4 ME980C-8 1 FNPT Emergency Shutoff Valve (ESV) Cable 4-3/4 Emergency Shutoff Valves (ESVs) are designed to provide rapid and positive shutdown of gas lines should a down stream rupture or piping break occur. Due to the presence of a built-in fusible element at the valve operating hub the ESV will automatically close when exposed to heat between 212 F F. These valves are ideally suited for installation at direct fired vaporizer inlets for automatic emergency shutdown as a result of fire or at dispensing pump inlets to provide immediate and positive remote shutdown. ME980C-6 FEATURES: Powder coated ductile iron body with cast hexagonal ends for maximum durability and ease of installation Integral swing away check valve with soft seat to promote maximum product flow and minimize product loss in the event line failure All stainless steel, corrosion resistant internal component construction Indicator clearly shows if valve is open/closed UL Listed for use with LP Gas and Anhydrous Ammonia PSI WOG Integral fusible element for automatic closure when exposed to fire Durable Teflon packing gland and resilient seals provide long lasting service life Available with pneumatic or cable style latch mechanism C sales@mtankco.com

38 EMERGENCY SHUTOFF VALVES 1-1/4-3 Emergency Shutoff Valves ME ME F Description Latch Type Flange Material OAL ME /4 FNPT Emergency Shutoff Valve (ESV) Pneumatic Ductile Iron 5-3/8 ME980C /4 FNPT ESV Cable Ductile Iron 5-3/8 ME FNPT ESV Pneumatic Cast Steel 6-7/8 ME980C-16 2 FNPT ESV Cable Cast Steel 6-7/8 ME FNPT ESV Pneumatic Ductile Iron 9-5/8 ME980C-24 3 FNPT ESV Cable Ductile Iron 9-5/8 ME F lb. Flange ESV Pneumatic 11-7/8 ME980C-16-2F lb. Flange ESV Cable 11-7/8 ME F lb. Flange ESV Pneumatic 14-1/8 Ductile Iron ME980C-24-3F lb. Flange ESV Cable 14-1/8 ME F lb. Flange ESV Pneumatic 14-1/4 ME980C-24-4F lb. Flange ESV Cable 14-1/4 Emergency Shutoff Valve (ESV) To order ESV with Pneumatic Actuator add A after the prefix part number i.e. ME980A-10 To order ESV with Rotary Actuator add AR after the prefix part number i.e. ME980AR-10 Emergency Shutoff Valves (ESVs) are designed to provide rapid and positive shutdown of gas lines should a down stream rupture or piping break occur. Due to the presence of a built-in fusible element at the valve operating hub, the ESV will automatically close when exposed to heat between 212 F F. These valves are ideally suited for installation at bulkheads or inline plumbing for automatic emergency shutdown as a result of fire or to provide immediate and positive manual or remote shutdown. C ME FEATURES: Durable powder coated ductile iron body Removable flanged ends for easy field service Integral swing-away check valve with soft seat to promote maximum product flow and prevent reverse product flow All stainless steel, corrosion resistant internal component construction UL Listed for use with LP Gas and Anhydrous Ammonia PSI WOG Integral fusible element for automatic closure when exposed to fire Durable Teflon packing gland and resilient seals provide long lasting service life Available with pneumatic or cable style latch mechanism LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 33

39 EMERGENCY SHUTOFF VALVES Emergency Shutoff Valve Actuators Actuator Type Fits MEC Fits ESV ME551 ME552 Airstroke TM by ME980-10, ME980-16, ME F, Fisher N /4, Firestone ME980-24, ME F, ME F Series 2, 3 Direct Drive ME980-10, ME980-16, ME F, Fisher N /4, ME980-24, ME F, ME F Series 2, 3 Airstroke TM is a trademark of Firestone Industrial Products Company Fisher and Fisher Internal Valves are trademarks of Emerson Process Management Emergency Shutoff Valve Actuators are to be used with emergency shutoff valves in remote locations. Pressure to the line enables a smooth acting cam to completely open the emergency shutoff valve for full flow operation. When line pressure is released, the emergency shutoff valve automatically closes. In case of a fire a thermal plug melts at 212 F, allowing the ESV to close. ME551 Modification is not required to actuators and all installation hardware is provided. The PowerTorq direct drive actuator maximizes the life of the emergency shutoff valve, eliminating side pressure on the packing stem. ME551 Operating Pressure Limits Minimum 20 PSIG Maximum 125 PSIG Recommended PSIG ME552 Operating Pressure Limits Minimum 25 PSIG Maximum 125 PSIG Recommended PSIG ME552 ME551 FEATURES: Heavy duty stainless steel all weather bracket Use with air, nitrogen or carbon dioxide Uses existing Fisher thermal plug ME552 FEATURES: Stainless steel, all weather mounting hardware Field repairable under full tank pressure Low temperature seals allow use with air, nitrogen, carbon dioxide or LP-Gas vapor Anodized aluminum actuator body with easy to see open/close indicator No pinch points for operator safety Factory installed thermal plug Includes mounting bracket for ME707 Quick Release Valve. NOTE: ME707 is not required for operation C sales@mtankco.com

40 EMERGENCY SHUTOFF VALVES ACCESSORIES ESV Accessories ME ME ME ME ME Description Universal ESV/Internal Valve Remote Release/No Cable Universal ESV/Internal Valve Remote Release with 25 Cable Universal ESV/Internal Valve Remote Release with 50 Cable Remote Release Cable Assy. 5/16-24UNF - 25 OAL Remote Release Cable Assy. 5/16-24UNF - 50 OAL ME C 44P 1/4 Plastic Air Tubing (100 ft.) ESV Air Tubing, Connectors, & Accessories Description 44P 1/4 Plastic Air Tubing, 100 ft. Length Only 44PX500 1/4 Plastic Air Tubing, 500 ft. Length Only 44PX1000 1/4 Plastic Air Tubing, 1000 ft. Length Only AP62P4 1/4 Plastic Air Union AP64P4 1/4 Plastic Air Tee AP68P4x2 1/4 Plastic x 1/8 MNPT, Male Connector AP68P4x4 1/4 Plastic x 1/4 MNPT, Male Connector AP69P4x2 1/4 Plastic x 1/8 MNPT, Elbow Connector AP69P4x4 1/4 Plastic x 1/4 MNPT, Elbow Connector AP61P4 1/4 Ferrule and Nut /4 ESV Palm Valve One-touch Fittings, No Connection Thread, New Series are available in a wide variety of sizes, body styles, and thread types. 44PX500 1/4 Plastic Air Tubing (500 ft.) Plastic Air Tubing (polyurethane tubing) is manufactured from Polyether resin, insuring the longest possible tube life due to its immunity to hydrolysis. Series TIUB inch size tubing is available in 8 colors, in standard stocked lengths. The ESV Palm Valve is a mechanical, poppet valve. Their compact size requires little mounting space. The VM series offers a wide variety of actuator styles and flow capacity up to 1.0 Cv. AP62P4 Plastic Air Union FEATURES: Fluid: air Operating pressure: -100kPa to 1.0MPa Effective area (Cv): 7mm 2 (0.38) Ambient and fluid temperature: -5 to 60 C (no freezing) Port size (nominal size): Rc(PT) 1/8 (6A) AP68P4X4 Male Connector AP69P4X4 Elbow Connector AP64P4 Plastic Air Tee Male Branch Tee, Thread G Male Connector, Thread G 3330 ESV Palm Valve LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 35

41 RELIEF VALVES Quad-Port Relief Valve Manifold Flange Size No. of Flow Capacity Factory Installed Relief Valve Accessory Relief Application SCFM/Air** Seal Start-to-Discharge Part No. 8 Stud/Nut Universal Valves 120% Set Pressure Material* Setting PSIG Mounting Kit ME903S-3F/250VM 3 LPG 20,400** Viton 3-300#** MEV250VM/250 ME903S-3F/250CN 3 LPG & NH 3 20,400** Nitrile MEV250CN/ ME903S-4F/250VM 3 LPG 20,400** Viton 4-300# MEV250VM/250 ME903S-4F/250CN 3 LPG & NH 3 20,400** Nitrile MEV250CN/250 ME904S-3F/250VM 4 LPG 27,740*** Viton 3-300# ** MEV250VM/250 ME904S-3F/250CN 4 LPG & NH 3 27,740*** Nitrile MEV250CN/ ME904S-4F/250VM 4 LPG 27,740*** Viton 4-300# MEV250VM/250 ME904S-4F/250CN 4 LPG & NH 3 27,740*** Nitrile MEV250CN/250 ME904SK ME903S-3F/265VM 3 LPG 20,555** Viton 3-300# ** MEV250VM/265 ME903S-3F/265CN 3 LPG & NH 3 20,555** Nitrile MEV250CN/265 ME903S-4F/265VM 3 LPG 20,555** Viton 4-300# MEV250VM/265 ME903S-4F/265CN 3 LPG & NH 3 20,555** Nitrile MEV250CN/ ME904S-3F/265VM 4 LPG 28,550*** Viton 3-300# ** MEV250VM/265 ME904S-3F/265CN 4 LPG & NH 3 28,550*** Nitrile MEV250CN/265 ME904S-4F/265VM 4 LPG 28,550*** Viton 4-300# MEV250VM/265 ME904S-4F/265CN 4 LPG & NH 3 28,550*** Nitrile MEV250CN/265 * Nitrile not UL Listed ** For use with modified 300 # ANSI Flange with 4 port *** Flow rating based on number of valves indicated in parenthesis () Flow rates are shown as bare relief valves, pipeaways will reduce flow Teflon is a trademark of DuPont Company Viton is a trademark of DuPont Performance Elastomers. Quad-Port Relief Valve Manifolds are designed for use with large LP-Gas and NH 3 stationary storage containers with flanged openings. These relief manifolds have an additional relief valve excluded from the flow rating, which allows for service and/or exchange of any one relief valve without evacuating the tank. The large port selection handle allows for each specific valve port to be closed off so the relief valve may be removed while the remaining valves remain under pressure, protecting the tank and contents. Each manifold model is rated based on the flow through the relief valves with one valve removed from service. FEATURES: Heavy duty ductile iron body Corrosion resistant finish Durable V-cup Teflon packing stem seals Molded rubber weather guard for manifold rotary gear with port plug Integral breakaway feature leaves seat and seal intact Includes weep hole deflector and hex socket plugs Integrated pilot equalizing feature Includes convenient lifting chain 3-1/2 - eight outlet thread accepts 3 MNPT pipeaway ME205 D sales@mtankco.com

42 RELIEF VALVES External Pressure Relief Valves Container Connection MNPT Start-to- Flow Capacity Suitable for Seal Wrench Discharge OAL SCFM/Air** Tanks w/surface Application Accessories Material* Hex Setting PSIG 120% Set Pressure Area Up To:*** MEV25/ /8 MEV25/ /8 1/4 1-59/64 MEV25/ /8 MEV25/ /8 MEV50/250 Nitrile / /2 2-1/2 MEV50/ /8 LPG MEV75/ /8 MEV75/312 3/ /32 1-1/8 MEV75/ /8 MEV250VM/250 Viton /8 10, sq. ft. MEV250CN/250 Nitrile /8 10, sq. ft. LPG & NH 2-1/2 10-1/2 3 MEV250VM/265 Viton /8 10, sq. ft. LPG MEV250CN/265 Nitrile /8 10, sq. ft. LPG & NH 3 MEP173 Pipeaway Adapter MEP174 Pipeaway Adapter MEP170 Relief Valve Adapter MEP250 Installation & Removal Tool * Nitrile and Kalrez not UL Listed ** Flow rates are shown for bare relief valves, pipeaways will reduce flow *** Per NFPA 58, table area shown is for UL or ASME flow rating, which ever is greater Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Kalrez option available External Pressure Relief Valves are designed for installation in stationary ASME applications such as bulk plant, skid tanks, underground and above ground containers, as the primary pressure relief valve. D MEV250VM/250 Top View NOTE: This valve and all working parts are to be installed outside the container. Therefore, to ensure proper operation of the valve, the valve must be protected from damage and inspections performed as prescribed by Marshall Excelsior. STEEL EXTERNAL PRESSURE RELIEF VALVE FEATURES: All stainless steel internal components Integral breakaway feature leaves seat and seal intact Durable ductile iron hex base Includes weep hole deflector and hex socket plugs Corrosion resistant finish 3-1/2 - eight outlet thread accepts 3 MNPT pipeaway Compatible with ALL 2-1/2 FNPT multiple head units BRASS EXTERNAL PRESSURE RELIEF VALVE FEATURES: Compact design to fit any application Stainless steel spring Non-adjustable, tamper resistant design Specially designed internal components to increase flow at discharge MEV250VM/250 MEP170 MEV50/250 MEP250 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 37

43 RELIEF VALVES Semi Internal Pressure Relief Valves STD/ Container Pipeaway Installation PSIG Connection Connection Hex Flow Capacity SCFM/Air** 120% Set Pressure Service Seat LPG NH 3 Material MEV200SIR/ ,870 MEV200SIR/ ,925 Nitrile MEV200SIR/ ,475 MEV200SIRV/ ,870 MEV200SIRV/ MNPT 3 MNPT 3-1/2 10,925 Yes No MEV200SIRV/ ,475 MEV200SIRK/125* 125 4,870 Viton MEV200SIRK/250* ,925 MEV200SIRK/265* ,475 Semi Internal Pressure Relief Valves are to be used in large stationary LPG containers as a primary pressure relief valve. They provide optimum performance when installed in either a 2 half or full coupling, making them perfect for most large stationary tank installations. Valves are available with all stainless steel components for NH 3 stationary container service applications. Accessories MEV- 200SIR-106 (Cap & Lanyard) MEP (Pipeaway Adapter) * Seat Material not UL Listed ** Flow rates are shown as bare relief valves *** Size relief capacity per NFPA , table Viton and Kalrez are trademarks of DuPont Performance Elastomers NOTE: For stainless steel add S to part to part number - i.e. MEV200SSIR/265 FEATURES: Durable forged brass body with 3 NPT outlet pipeaway thread All steel and stainless steel stem, spring, and valve gasket holder for maximum corrosion resistance Custom set pressures available Available with Nitrile, Viton, or Kalrez valve seals Large seating surface for superior seal performance and reliability Available with 125, 250, 265 PSI UL Listed set pressures MEV200SIR Full Internal Pressure Relief Valve Start-to- UL Flow Capacity Accessories Container Container Seal Discharge SCFM/Air** Relief Discharge Vents Application Protective Type Connection Material* Setting Per CGA S1.1 Valve Cap PSIG Plug Angle Angle MEV75FIR* DOT 3/4 MNPT Viton LPG MEP175C MEP175P MEP MEP * UL Listed in accordance with Compressed Gas Association Pamphlet S-1.1, Pressure Device Standard for Cylinders; Meets requirements for use on DOT containers with 242 lb. or less weight of water or 122 lb. or less of LP-Gas; ** Flow rates are shown for bare relief valves, pipeaways will reduce flow; Viton is a trademark of DuPont Performance Elastomers D Full Internal Pressure Relief Valves are designed for use on forklift cylinders and other DOT removable cylinders up to 122 pounds of LP-Gas capacity. The working components of this valve are located inside the tank reducing possible malfunction caused by outside debris or other foreign materials. NOTE: NFPA #58 states, All containers used in industrial trucks (including fork lift truck cylinders) service shall have the container pressure relief valve replaced by a new or unused valve within 12 years of the date of manufacture of the container and every 10 years thereafter. MEV75FIR MEP175C MEP MEP sales@mtankco.com

44 RELIEF VALVES Full Internal Pressure Relief Valves STD/ PSIG Container Connection Installation Hex Flow Capacity Service SCFM/Air** 120% Set Pres. LPG NH3 Seat Material Cap Accessory Hex Installation Tool MEV200FIR/ MNPT 1-1/2 4,460 Yes Yes Nitrile MEV200FIR-09 MEP200FIR MEV200FIR/ MNPT 1-1/2 4,670 Yes Yes Nitrile MEV200FIR-09 MEP200FIR MEV200FIRV/ MNPT 1-1/2 4,460 Yes No Viton MEV200FIR-09 MEP200FIR MEV200FIRV/ MNPT 1-1/2 4,670 Yes No Viton MEV200FIR-09 MEP200FIR MEV200FIRK/250* MNPT 1-1/2 4,460 Yes Yes Kalrez ~ MEV200FIR-09 MEP200FIR MEV200FIRK/265* MNPT 1-1/2 4,670 Yes Yes Kalrez ~ MEV200FIR-09 MEP200FIR MEV300FIR/ MNPT 2-1/2 10,865 Yes Yes Nitrile MEV300FIR-09 MEP300FIR MEV300FIR/ MNPT 2-1/2 11,600 Yes Yes Nitrile MEV300FIR-09 MEP300FIR MEV300FIRV/ MNPT 2-1/2 10,865 Yes No Viton MEV300FIR-09 MEP300FIR MEV300FIRV/ MNPT 2-1/2 11,600 Yes No Viton MEV300FIR-09 MEP300FIR MEV300FIRK/250* MNPT 2-1/2 10,865 Yes Yes Kalrez ~ MEV300FIR-09 MEP300FIR MEV300FIRK/265* MNPT 2-1/2 11,600 Yes Yes Kalrez ~ MEV300FIR-09 MEP300FIR * Seat Material not UL Listed ** Flow rates are shown for bare relief valves, pipe-aways will reduce flow *** Size relief capacity per NFPA , table ~ Recommended for LPG and NH 3 dual service applications Full Internal Pressure Relief Valves are for use in mobile LPG and NH 3 containers as a primary pressure relief valve for bobtail and transport trailer installations. All working components are internal to the container connection preventing damage to the valve should a roll-over occur. MEV200FIR/ MEV300FIR FEATURES: Stainless steel body construction All stainless steel internal components for maximum corrosion resistance Nitrile, Viton, or Kalrez seals available Large seating surface for superior seal performance and reliability 250 and 265 PSI set pressures available Custom set pressures available Flanged Full Internal Pressure Relief Valves D STD/PSIG Container Connection Flow Capacity SCFM/Air** Service Seat Accessories Material 120% Set Pressure LPG NH 3 Cap MEV300FIR-3F/ ,865 Yes Nitrile MEV300FIR-3F/ ,600 Yes Nitrile MEV300FIRV-3F/ ,865 No Viton lb. Flange Yes MEV300FIRV-3F/ ,600 No Viton MEV300FIR-09 MEV300FIRK-3F/250* ,865 Yes Kalrez ~ MEV300FIRK-3F/265* ,600 Yes Kalrez ~ * Seat Material not UL Listed ** Flow rates are shown for bare relief valves *** Size relief capacity per NFPA , table ~ Recommended for LPG and NH 3 Dual Service Applications Viton and Kalrez are trademarks of DuPont Performance Elastomers MEV250VM/250 Flanged Full Internal Pressure Relief Valves are for use in mobile LPG and NH 3 containers as a primary pressure relief valve for bobtail and transport trailer installations. All working components are internal to the container connection preventing damage to the valve should a roll-over incident occur. Marshall Excelsior s unique design incorporates a standard 3 ANSI lb. raised face flange connection to assure a 100% leak free connection for rugged over-the-road applications. This eliminates problems associated with NPT threaded connections and/or tank coupling wear due to vibration from over-the-road transit, providing maximum tank and relief valve service life. FEATURES: Marshall Excelsior s FlangeFull Internal Pressure Relief Valves have the same features as their Full Internal Pressure Relief Valves above. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 39

45 RELIEF VALVES Hydrostatic Pressure Relief Valves Body Material Seal Material Start-to- Discharge Setting PSIG Accessory Inlet MNPT A B C D Pipeaway Adapter MEH225 Brass Nitrile 440 1/4 1-1/16 13/16 1/4 9/16 Hex MEH225SS/350 Stainless Steel Nitrile 350**** 1/4 1-1/16 13/16 1/4 9/16 Hex MEH225SS/400 Stainless Steel Nitrile 400 1/4 1-1/16 13/16 1/4 9/16 Hex MEH225SS Stainless Steel Nitrile 440 1/4 1-1/16 13/16 1/4 9/16 Hex MEH25/450 Brass Nitrile 450 1/4 1-59/ /64 1/4 7/8 Hex MEP173* MEH25K/450 Brass Kalrez 450 1/4 1-59/ /64 1/4 7/8 Hex MEP173* MEH25V/450 Brass Viton 450 1/4 1-59/ /64 1/4 7/8 Hex MEP173* MEH50/460 Brass Nitrile 460 1/2 2-1/2 2-1/8 3/8 1-1/8 Hex MEP174** MEH75/460 Brass Nitrile 460 3/4 2-21/32 2-5/32 1/2 1-1/8 Hex MEP174** MEJ602H*** Brass Nitrile 440 1/4 * 1/4 FNPT Outlet ** 1/2 FNPT Outlet *** Factory Installed Vent Valve **** Special Applications Hydrostatic Pressure Relief Valves are designed to protect piping and shutoff valves from overpressure situations where liquid LP-Gas or NH 3 has the potential to be trapped. Valves provide pressure relief and protect against line or plumbing system failures. FEATURES: Compact design to fit any application Stainless steel spring Non-adjustable, tamper resistant design Stainless steel models rated for LP-Gas and NH 3 Designed to increase flow at discharge MEP173 MEH225SS MEH25 MEH50 MEH75 External Pressure Relief Valves CAVAGNA GROUP D Bottom Male Connection Wrench Grip Hexagon Thread PRV - Start to PRV-OVERPRESSURE 10% PRV Type Discharge CAPACITY Nm3/min. Approval Orifice (mm) Setting (PSIG) (If not specified otherwise) (mm) PRV 1/4-18 NPT 22 Taper (at 120% O.P.SCFM-AIR) UL/ASME PRV 1/4-18 NPT 22 Taper (at 120% O.P.SCFM-AIR) UL EU19 3/4 NPT Taper (at 20% O.P.SCFM-AIR) UL/ASME Pressure relief valves are designed for small containers and on-line pipe installations. Setting point: 250 PSIG Pressure relief valves are for small containers and on-line pipe installations. Setting point: 375 PSIG sales@mtankco.com

46 RELIEF VALVES Internal Pressure Relief Valves for ASME & DOT Containers CAVAGNA GROUP Container Start-to-Discharge UL* Flow ASME* Flow Wrench Connection Setting PSIG capacity SCFM/AIR capacity SCFM/AIR Hex Flat NPT 375 1, / /4 NPT 250 2,007 1, / NPT 250 2,757 2, / /4 NPT 250 4,312 3, / ** 1 NPT / ** 1 NPT / /4 NPT /16 *(at 120% of set pressure) **Fully internal Cavagna s Internal Pressure Relief Valves for ASME and DOT Containers are designed specifically for use as a primary pressure relief device on ASME containers up to 2,000 gallon water capacity. Furnished with rain cap for protection against contamination. See ordering information for part numbers. All these valves have a pre-applied sealant on the container connection. All these valves are ASME approved Rain Cap Valve Cap Internal Pressure Relief Valves for DOT Fork Lift Cylinders CAVAGNA GROUP D Container Start-to-Discharge UL (at 120% of Set Pressure) Wrench Connection Setting (PS) Flow Capacity SCFM/AIR Hex Flat 3/4 NPT /16 Internal Pressure Relief Valve for DOT Fork Lift Cylinders are designed specifically for use as primary relief valve on fork lift cylinders. A 45 deflector adapter is already included into the body of the valve. The design of the valve is a one-piece hot forged brass body. Internal Pressure Relief Valve for DOT Fork Lift Cylinders are designed specifically for use as primary relief valve on fork lift cylinders LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 41

47 RELIEF VALVES Full Internal Pressure Relief Valves for DOT Fork Lift Cylinders SHERWOOD LPG PRODUCTS Container Start-to-Discharge Flow Capacity SCFM Air Tank Surface Area (Sq. Ft.) Pipeaway Connection Setting (PSIG) UL ASME UL ASME Adapter PV435L 3/ / Full Internal Pressure Relief Valves are designed to be used on fork lift trucks and other power units with removable DOT cylinders with up to 100 lb. LPG capacity. CAUTION: The PV435L is intended as a replacement relief valve on cylinders which previously incorporated a relief valve with an external spring. PV435L Internal Spring-Type Pressure Relief Valves for ASME Containers SHERWOOD LPG PRODUCTS Container Start-to-Discharge Cu. Ft./Min. Flow Capacity Tank Surface Area (Sq. Ft.) Rain Relief Area Connection Setting (PSIG) UL ASME UL ASME Cap (Sq. Inches) UVE433AM , A 0.37 UVE433C* , A 0.37 UVE443AM , A 0.66 UVE443AC , A 0.66 UVE453AM , A 1.23 UVE453AC* , A 1.23 *California setting 275 PSIG Internal Spring Relief Valves are designed as pressure relief devices for ASME containers and domestic tanks. They have sturdy construction and are made with non-corrosive materials. Rain caps are furnished for protection against contamination. D UVE433AM UVE443AC UVE453A Raincap sales@mtankco.com

48 RELIEF VALVES Full Internal Pressure Relief Valves SHERWOOD LPG PRODUCTS Tank Connection Start-to-Discharge Flow Capacity SCFM Air Tank Surface Area (Sq. Ft.) Pipeaway (NPT) Setting (PSIG) UL ASME UL ASME Adapter UVE445AM PVE445AT* PVE436AE** The UVE445A Series is used as a pressure relief device on larger ASME engine fuel containers and recreational vehicle containers. Use PVE445AT on multiport 420 lb. DOT containers. The protective cap UEP16 included with this relief valve. The UVE436BR Relief Valve is used as pressure relief devices on smaller ASME engine fuel containers and recreational vehicle containers. These valves use a smaller, more economical 3 4 NPT tank coupling and include protective cap 436BR-20. The valve is threaded to accept pipeaway adapter (5 8 SAE flare outlet), which provides minimum flow restriction. Hydrostatic Relief Valve for Engine Fuel SHERWOOD LPG PRODUCTS NPT Connection Start-to-Discharge Setting (PSIG) PVE Hydrostatic Pressure Relief Valves are designed to relieve the hydrostatic pressure which might develop in sections of liquid piping between closed shutoff valves. They are primarily used in manifolds and carburetion systems. PVE3865 FEATURES: Small and economical Protective cap UAS 10 included Start-to-discharge setting is 400 PSIG Flow capacity tests are not required for this class of valve D LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 43

49 BYPASS VALVES Bypass Valves For Bobtail Truck/Plant Applications Description Standard Spring Range* ME /4 FNPT High Flow Bypass Valve PSI ME /4 Socket Weld High Flow Bypass Valve PSI ME /2 FNPT High Flow Bypass Valve PSI ME /2 Socket Weld High Flow Bypass Valve PSI ME FNPT High Flow Bypass Valve PSI ME840C FNPT Classic Flow Bypass Valve PSI ME Socket Weld High Flow Bypass Valve PSI ME /4-2 Universal High Flow Bypass without Flanges PSI *Alternate spring ranges available ME840-10F ME841-10F ME840-12F ME841-12F ME840-16F ME841-16F MEP MEP MEP MEP MEP MEP Universal Flange Kits Description 1-1/4 FNPT 4 Bolt Flange Adapter Plate with Bolts and O-ring 1-1/4 Socket Weld 4 Bolt Flange Adapter Plate with Bolts and O-ring 1-1/2 FNPT 4 Bolt Flange Adapter Plate with Bolts and O-ring 1-1/2 Socket Weld 4 Bolt Flange Adapter Plate with Bolts and O-ring 2 FNPT 4 Bolt Flange Adapter Plate with Bolts and O-ring 2 Socket Weld 4 Bolt Flange Adapter Plate with Bolts and O-ring 1-1/4 FNPT 4 Bolt 90 Flange Adapter Elbow with Bolts and O-ring 1-1/4 Socket Weld 4 Bolt 90 Flange Adapter Elbow with Bolts and O-ring 1-1/2 FNPT 4 Bolt 90 Flange Adapter Elbow with Bolts and O-ring 1-1/2 Socket Weld 4 Bolt 90 Flange Adapter Elbow with Bolts and O-ring 2 FNPT 4 Bolt 90 Flange Adapter Elbow with Bolts and O-ring 2 Socket Weld 4 Bolt 90 Flange Adapter Elbow with Bolts and O-ring ME840-16/125 Marshall Excelsior s High Flow Bypass Valves for Bobtail Truck/Plant Applications are specifically designed to protect truck and plant pumps from damage due to excessive pressure while providing the industry s best bypass flow rates across a full range of set pressures. They feature wide open flow channels with an orifice weep hole chamber to prevent the valve from slamming open/closed. The weep hole chamber also helps prevent valve seat chatter by allowing constant pressure communication between both the upstream and downstream side of the seat. ME FEATURES: All ductile iron body and bonnet Weldable steel NPT and socket weld flanges All stainless steel wetted component Heavy duty protective stem cap Wide open flow channels for industry best flow rates Orifice weep hole to maintain constant pressure above and below valve seat Large range of set pressure springs Zinc dichromate finish for maximum corrosion resistance Available with or without flanges factory assembled Flanges available 1-1/4 through 2 NPT and socket weld construction Universal 4 bolt, flanged body configuration Two 1/4 FNPT plugged auxiliary pressure ports Factory set at 125 PSI ME840C E sales@mtankco.com

50 BYPASS VALVES High Flow Bypass Valves for Dispensing Applications Description Standard Spring Range* ME /4 FNPT High Flow Bypass Valve PSI ME FNPT High Flow Bypass Valve PSI * Alternate spring ranges available. These Marshall Excelsior Valves are intended for use in small cylinder filling applications as a bypass and primer valve for turbine style dispensing pumps. These bypass valves feature a special check ball mechanism that helps eliminate vapor from liquid while keeping the pump flooded and properly primed. The priming and vapor elimination features, in combination with the high flow bypass design, significantly reduces pump wear and promotes seal longevity. ME840-6/150 FEATURES: Ductile iron body and bonnet construction Large range of set pressure springs Two 1/4 FNPT plugged auxiliary pressure ports (outlet side) Stainless steel main valve poppet Heavy duty protective stem cap Available in 3/4 and 1 FNPT threaded versions Factory set at 125 PSI Durable powder coat finish High Flow 3 Bypass Valve for Plant Applications Description Standard Spring Range* ME FNPT High Flow Bypass Valve PSI * Alternate spring ranges available. The 3 Bypass Valve is specifically designed for plant systems where maximum bypass flow is necessary to protect the pump from rapid pressure changes or over pressurization. Perfectly suited for 4 base mount pumps or larger pump applications. ME840-24/100 FEATURES: Ductile iron body and bonnet construction All stainless steel internal wetted components Bonnet/seat positioned at 35 angle for maximum product flow Downstream bleed port to boost product flow during bypass Two 1/4 FNTP plugged auxiliary pressure ports Heavy duty protective stem cap Factory set at 100 PSI Durable powder coat finish E LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 45

51 BYPASS VALVES High Flow Maximum Flow Through Bypass Valves BLACKMER Maximum Rated Flow* - GPM Ports 20 PSI 50 PSI 80 PSI 120 PSI (1.38 Bar) (3.45 Bar) (5.52 Bar) (8.27 Bar) BV NPT Tapped BV1 1 NPT Tapped 25 (95) 40 (151) 50 (189) 60 (227) BV /4 NPT Tapped BV /2 NPT Tapped 60 (227) 80 (303) 100 (379) 125 (473) BV2 2 NPT Companion Flanges** 150 (568) 180 (681) 220 (833) 250 (946) *Normal maximum bypass flow rates without significantly exceeding the set pressure limit ** inch and inch NPT and WELD bolt-on flanges are available Blackmer Bypass Valves provide exceptionally close pressure control, even under widely varying bypass flow conditions. They are designed to protect pumps and system components from excessive pressure damage, and no LP gas pump installation is complete without one. The valves do not have small, easily plugged, sensing passages; and with only two moving parts, their operation is simple and reliable. They open precisely at the preset spring pressure, and they close smoothly and quietly, thanks to a patented dash-pot design. A small chamber in the valve stem fills with liquid when the valve opens. This liquid then provides a hydraulic cushion preventing the valve from slamming shut if pressure is suddenly released. It also minimizes chatter and valve seat wear when pressures hover around the crucial limit. BV.075 / BV1 BV0.75 and BV1 Bypass Valves Used for cylinder-filling system May be used with 1-1/4 or 1-1/2 Blackmer pump models BV1.25 and BV1.5 Used for bobtail trucks and smaller bulk plant systems May be used with 2 or 3 Blackmer pump models BV2 Used for transports or larger bulk plant systems PSI is set at 125 Recommended for use with 3 and 4 Blackmer pump models E sales@mtankco.com

52 BYPASS VALVES Bypass Valve CORKEN *Alternate spring ranges available Description Standard Spring Range* ZV200 2 NPT Low Pressure Build-up Bypass Valve PSI Corken s Low Pressure Build-up Bypass Valves are specifically designed for applications requiring protection for positive displacement pumps. The valves protect pumps with capacities up to 250 GPM (946 L/min). The continuous internal bleed will assist in the operation of systems with air or electric operated internal valves, equalizing pressure. Typical applications include bobtail, transport and stationary loading and unloading of LPG, NH 3 and other light liquids. ZV200 FEATURES: All ductile iron body Flow rates up to 250 GPM (946 L/min) at 120 PSI (8.3 bar) differential Multiple spring options to select required pressure for truck or stationary application Multiple flange options: 1-1/4, 1-1/2, 2, 2-1/2 NPT and weld flanges Dual inlet and outlet gauge openings No unions necessary for installation Automatic Dual-Purpose, Bypass Valve CORKEN Inlet Outlet Slip-on Weld Flange Differential Pressure Range PSI B166 3/4, 1 3/4, 1 No ( ) Automatic Dual-Purpose, Bypass Valves are typically used for cylinder filling pumps and aerosol propellant feed pumps. The valves are a combination bypass and priming valve specifically designed for small cylinder-filling-type pumps, especially of the regenerative turbine type, such as the Corken Coro-Flo pump series with flows up to 40 GPM (9.1 m3/hr). The patented vapor elimination system keeps liquefied gas pumps primed to increase system reliability and decrease pump and seal wear. The B166 is a smooth operating bypass with moderate pressure buildup. B166 Pump Flow Control Valve CORKEN E Inlet Outlet Slip-on Weld Flange Differential Pressure Range PSI T /4, 1-1/2 1-1/4, 1-1/2 No ( ) Pump Flow Control Valves are typically used for large-capacity pumps filling variable size tanks and bottles such as those used with delivery trucks or multiple cylinder filling plants. A highpressure build-up valve for smooth acting flow control. The T166 is specifically designed for bypass protection for pumps in the GPM ( m3/hr) range, such as those used on delivery trucks. In contrast to the B177, the T166 valve opens gradually as pressure builds up to modulate the flow, bypassing the excess capacity smoothly and silently back to the supply tank. A continuous internal bleed in this valve assists in eliminating vapors. T166 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 47

53 BYPASS VALVES Differential Bypass Valve CORKEN Inlet Outlet Slip-on weld flange Differential Pressure Range PSI 1-1/4, 1-1/2 1-1/4, 1-1/ B177 No 2, 2-1/2 2, 2-1/2 (0.7 11) Differential Bypass Valves are typically used in liquefied-gas bulk-plant installations for loading and unloading pumps. The B177 is a low-pressure build-up bypass valve specifically designed for applications requiring protection for positive displacement pumps in the GPM ( m3/hr) range. It can also be used as a differential back-pressure valve to assure adequate pressure on meters, etc. To function properly, this valve requires a pressure sensing line from the storage tank. B177 EXCESS FLOW VALVES Excess Flow Valves Brass Stainless Inlet Outlet Closing Flow Steel* Steel* MNPT FNPT GPM Propane ME880-4/1.8 1/4 1/4 1.8 ME880-6/4.6 ME880S-6/4.6 ME880SS-6/4.6 3/4 3/4 4.6 ME880-6/14 ME880S-6/14 ME880SS-6/14 3/4 3/4 14 ME880-6/17 ME880S-6/17 ME880SS-6/17 3/4 3/4 17 ME880-6/22 ME880S-6/22 ME880SS-6/22 3/4 3/4 22 ME880-6/28 ME880S-6/28 ME880SS-6/28 3/4 3/4 28 ME880-10/32 ME880S-10/32 ME880SS-10/32 1-1/4 1-1/4 32 ME880-10/42 ME880S-10/42 ME880SS-10/42 1-1/4 1-1/4 42 ME880-16/80 ME880S-16/8 ME880SS-16/ ME880-16/105 ME880S-16/105 ME880SS-16/ ME880-16/114 ME880S-16/114 ME880SS-16/ ME882S-16/ MNPT 80 ME882S-16/ MNPT 105 ME882S-16/ MNPT 114 ME880S-24/ ME880S-24/ ME882S-24/ MNPT/2 FNPT 265 ME882S-24/ MNPT/2 FNPT 350 Liquid Butane Capacity = Flow Rate x.94 Liquid Anhydrous Ammonia Capacity = Flow Rate x.90 Marshall Excelsior offers the Largest Closing Flow Selection in the industry. These excess flow valves are intended for use in liquid or vapor LP-Gas or NH 3 systems. These valves can be used for filling, withdrawal and vapor equalization in containers or line applications, specifically long lines or branch piping. This product is designed to protect against excessive discharge as a result of a break in the hose or piping system. The excess flow feature is designed to remain closed after activation until the system pressure equalizes on both sides of the shutoff poppet. WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. See Marshall Excelsior s web site for more information regarding the use of excess flow devices. ME880 Series ME880S Series E FEATURES: Integral breakaway feature leaves valve assembly intact with internal hex broach for easy removal All stainless steel internal components ME882S Series sales@mtankco.com

54 EXCESS FLOW VALVES Excess Flow Valve for Liquid or Vapor CAVAGNA GROUP Material Inlet Outlet Wrench Connection Connection Hex Flats Approximate Closing Flows Length Liquid (GPM Propane) PSIG Inlet PSIG Inlet Steel 1-1/4 1-1/ / ,750 9, Steel 1-1/4 1-1/ / ,500 13, Steel 1-1/4 1-1/ / ,800 15,970 Cavagna Excess Flow Valves are designed for liquid or vapor fill/withdrawal and for vapor equalization in containers or line applications. They are intended to close when the liquid or vapor passing through the hose or the piping system exceeds the prescribed flow rate. Valves are available in different sizes and body configurations. Once the flow exceeds the valve s setting, the valve closes and will remain closed until the system equalizes. Once the pressure on both sides of the poppet is equal, a built-in equalizing passage automatically opens the valve. Excess Flow Valve Excess Flow Valve for Liquid or Vapor Withdrawal CAVAGNA GROUP Material Inlet Outlet Wrench Connection Connection Hex Flats Approximate Closing Flows Liquid (GPM Propane) PSIG Inlet PSIG Inlet Steel 1-1/4 1-1/4 1-7/ ,600 18, Steel 1-1/4 1-1/4 1-7/8 55 3,830 6,760 Excess Flow Valves for Liquid or Vapor Withdrawal are designed to be mounted on the bottom of storage tanks for liquid service. They may also be mounted on the top for vapor service. E Excess Flow Valves LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 49

55 BACK CHECK VALVES High Flow Back Check Valves Brass Steel* Propane Flow at Bonded Inlet Outlet Stainless 10 PSIG Pressure Soft FNPT MNPT Steel* Differential Seat ME870-6 ME870S-6 ME870SS-6 3/4 3/4 24 No ME ME870S-10 ME870SS /4 1-1/4 61 No ME ME870S-16 ME870SS No ME872S-16 2 MNPT No ME870S No ME870SBN-24** Yes ME872S-24 2 FNPT/ 3 MNPT No ME872SBN-24 2 FNPT/ 3 MNPT Yes * Rated for LP-Gas & NH 3 ** Use for high flow transport applications Liquid Butane Capacity = Flow Rate x.94 Liquid Anhydrous Ammonia Capacity = Flow Rate x.90 Marshall Excelsior s Back Check Flow Valves lead the industry with up to 20% more flow than the nearest competitor. These valves provide flow protection to container openings or liquid lines where flow is intended for one direction. The valve is normally closed until pressure activates the valve when flow is directed into piping or containers causing the back check to open. When flow stops or reverses, the check returns to the closed position. ME870 Series Shown with O-ring Soft Seat ME870 Series Shown with O-ring Soft Seat The valves come with dual seating capabilities or an optional bonded soft seat on the 3 model. With the dual seating capabilities, the factory installed O-ring provides a leak-free, soft seat seal which enables repair and maintenance to be done on depressurized plumbing. Remove the O-ring to allow metal-to-metal seating with a minimal leak seal to restrict flow in case of a break in the line. NOTE: Leaving the O-ring soft seat installed on the valve will require a minimum of 15 PSIG pressure differential between the transfer line and container to unseat the valve and allow it to fully open. The optional bonded soft seat on the three inch model cannot be removed for metal-to-metal seating. ME870SBN-24 Shown with Bonded Soft Seat FEATURES: All stainless steel internal components Full port and increased stem travel design allows maximum flow Integral breakaway feature leaves valve assembly intact with internal hex broach for easy removal Dual purpose seat reduces inventory from 2-to-1 ME872S-16 E sales@mtankco.com

56 BACK CHECK VALVES High Flow Double Back Check Valves Propane Flow Description Differential Pressure 10 PSI 25 PSI 50 PSI ME869-10/10 1-1/4 MNPT x 2-1/4 M. Acme ME869-10/8 1-1/4 MNPT x 1-3/4 M. Acme ME MNPT x 3-1/4 M. Acme ME MNPT x 3-1/4 M. Acme ME High Flow Double Back Check Valves provide back flow protection to container openings or liquid lines where flow is intended in one direction. The valve is normally held closed until pressure activates the valve when flow is directed into piping or containers causing the double back check to open. When flow stops or reverses, both checks return to the closed position. All MEC High Flow Double Back Check Valves are supplied with the correct ACME cap and chain assembly, as well as factory installed hydrostatic relief protection. ME FEATURES: Primary seat creates metal to metal seating surface Secondary seat is bonded Nitrile soft seat for a leak free seal Up to 20% more flow than nearest competitor Maximum product flow achieved by full port and stem travel design Stainless steel stem, spring and valve guide in body check assembly Built-in hydrostatic relief valve ONLY for use with LP Gas Back Pressure Valves CAVAGNA GROUP Material Inlet Outlet Wrench Connection Connection Hex Flats Length Propane Liquid Capacity at different r Pressure 5 PSIG 10 PSIG 25 PSIG Steel 3/4 F NPT 3/4 M NPT 1-3/8 1-15/16 (49.2 mm) Steel 1-1/4 F NPT 1-1/4 M NPT 2 2-1/2 (63.5 mm) Steel 2 F NPT 2 M NPT 3 3 3/8 (83.5 mm) E Cavagna Back Pressure Valves are intended to prevent liquid discharge when the desired flow is directed into the vessel thereby allowing the flow in only one direction. When coupled with the appropriate single check filler valve, the combination forms a double check filler valve suitable for use in filling of bulk storage tanks. Back Pressure Valve Back Pressure Valve Back Pressure Valve LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 51

57 VENT VALVES Vent Valves Brass Brass Replacement Stems Stainless Steel* Type MEJ400/72 MEJ401 Low Emission #72 Orifice MEJ400SC MEJ401SC Self-Cleaning, Low Emission #54 Orifice MEJ400 MEJ401, MEJ401SC MEJ402S Standard #54 Orifice MEJ400C Captured Stem Standard #54 Orifice MEJ602H** MEJ400, MEJ401, MEJ401SC 90 Elbow w/hydrostatic Relief MEJ606 MEJ400, MEJ401, MEJ401SC 90 Elbow 1/4 MPT x 1/4 M. Flare * Rated for LP-Gas and NH 3 **Factory Installed Vent Valve Marshall Excelsior is the only manufacturer in the industry that offers three types of vent valves Low Emission, Self-Cleaning Low Emission, and Standard Vent Valves. All these vent valves are designed to minimize loss of product while allowing the operator to effectively bleed down connections and detect liquid levels while filling containers. Vent valves provide an effective means to verify valves have closed in the transfer system when installed into the downstream auxiliary port on the Marshall Excelsior globe and angle valves. Opening the vent valve until liquid or vapor stops venting indicates it is safe to disconnect. All brass versions have knurled stems that completely unscrew from the valve making the stems replaceable. The stainless steel version has a t-handle stem that is non-removable. The Low Emission Vent Valve and the Self-Cleaning Low Emission Vent Valve reduce emissions by 70% during normal container filling operations. The Self-Cleaning Low Emission Vent Valve cleans out the orifice hole each time it is operated. The hole is cleaned out with a #54 orifice drill that reams the valve s orifice hole each time the adjusting screw is loosened or tightened, eliminating nuisance orifice clogging. The reduced venting emissions is achieved by forcing product to pass between the #54 orifice hole and the flutes of the captured self-cleaning apparatus. The self-cleaning replacement screw (MEJ401SC) is compatible with all existing standard vent valve bodies allowing a standard vent valve to be converted into a self-cleaning low emission vent valve without reinstalling the valve body. The Standard Vent Valve has a #54 orifice with no self-cleaning apparatus. MEJ602H Self-Cleaning The Low Emission Vent Valve has a #72 orifice. FEATURES: 70% emission reduction with self-cleaning and low emission vent valves 1/4 MNPT Connection Available with dip tubes MEJ400SC Patent Pending MEJ401 E Self-Cleaning MEJ606 MEJ402S MEJ400/72 MEJ400 MEJ401SC Patent Pending sales@mtankco.com

58 VENT VALVES Fixed Maximum Liquid Level Gauges SHERWOOD LGP PRODUCTS Sherwood s Fixed Maximum Liquid Level Gauges indicate maximum filling level as specified in NFPA Pamphlet #58. All gauges have 1 4 NPT inlet threads. Gauges are listed below: PVE12A FEATURES: Use where a liquid level tube is welded in the vessel, or where the gauge opening on the container is at the maximum allowable filling level #54 drill size orifice PVE12AD FEATURES: Identical to PVE12A, but supplied with a stop filling dial PVE12A PVE10DRF FEATURES: Manually operated shutoff valve; mounts directly on the tank Use with a remote liquid level gauge Can be manually shut off should repairs in the line become necessary 1 4 SAE flare outlet connection 1 4 NPT tank connection Does not contain a #54 drill size orifice; install only where a #54 size orifice is built into the tank coupling PVE10ARF FEATURES: Identical to the PVE10DRF, but contains a #54 drill size orifice Use where no orifice is provided in the tank coupling E PVE12AD PVE10DRF PVE10ARF LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 53

59 VENT VALVES Fixed Liquid Level Gauges CAVAGNA GROUP Container Connection Outlet Connection DT Length /4 MNPT Without /4 NPTF 1/4 SAE Flare Without FEATURES: Special DT length can be ordered Optional instruction plate may be ordered Valves incorporate a No. 54 drill size orifice E sales@mtankco.com

60 GLOBE & ANGLE VALVES High Flow Globe & Angle Valves Side No. of Flange Accessories Inlet Outlet Port (FNPT) (FNPT) Side Style E-Z Turn Hydrostatic Angle Globe Ports Bonnet Knob Relief Valves ME815-4 ME /2 1/2 FNPT 1 No ME815-6 ME /4 3/4 FNPT 1 No ME815-8 ME FNPT 1 No ME ME /4 1-1/4 FNPT 2 Yes ME829 MEH225 MEJ400 1/4 ME /4 1-3/4 M. Acme 2 Yes ME829 MEH225SS MEJ400SC ME /4 2-1/4 M. Acme 2 Yes ME829 MEH25/450 MEJ402S ME ME /2 1-1/2 FNPT 2 Yes ME829 ME ME FNPT 2 Yes ME829 ME FNPT 1/2 2 Yes ME829 MEH50/460 ME /4 M. Acme 2 Yes ME829 MEH225 MEJ400 ME ME FNPT 1/4 MEH225SS MEJ400SC 2 Yes Included MEH25/450 MEJ402S To order Teflon or Viton Seal add T for Teflon and V for Viton after the prefix part number, i.e. ME815T-10 or ME815V-10 Teflon is a trademark of DuPont Company and Viton is a trademark of DuPont Performance Elastomers. Vent Valves All Marshall Excelsior Globe and Angle Valves are designed to withstand extreme temperatures and can increase flow up to 70% over a standard globe valve. The 35º seat angle on the 1-1/4 and larger globe valves make them ergonomically designed for bobtail, transport and bulk plant applications. This 35º seat angle also allows up to 70% more flow. The 1-1/4 and larger globe and angle valves have an optional 360º rotating ME829 E-Z Turn Knob. These valves are mainly used in piping systems to control liquid or vapor flow in bulk plants, bobtails, transports, pumps or compressors. Globe valves are designed to be installed in a straight section of piping and angle valves are to be used when a 90º directional change is needed in the piping. ME825-6 Vent Valve Not Included FEATURES: All stainless steel internal components with rotating seat disc design and V-cup Teflon packing stem seals Leak free double stem seal design Durable ductile iron valve body with automotive grade powder coat finish Double lead stem thread ensures quick and efficient operation 1-3/4, 2-1/4, and 3-1/4 Acme threads available on globe valves Rated for 400 WOG Operating temperature 40 to +212 F E ME ME Patent Pending ME815-6 Vent Valve Not Included ME Patent Pending LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 55

61 GLOBE & ANGLE VALVES Next Generation Globe and Angle Valves Flange Accessories Side No. of Angle Globe Inlet Style Outlet Port Side E-Z Hydrostatic Integrated Pilot Integrated Pilot (FNPT) Bonnet Turn Relief (FNPT) Ports Back Check Feature Back Check Feature Relief Knob Valves Vent Valves ME815IBC-16 ME815P-16 ME825IBC-16 ME825P FNPT 1/4 2 Yes ME829 MEH225 MEJ400 MEH225SS MEJ400SC ME828IBC-16 ME828P /4 Male 1/4 2 Yes ME829 MEH25/450 MEJ402S ME824IBC-16 ME824P FNPT 1/2 2 Yes ME829 MEH50/460 Marshall Excelsior s Next Generation High Flow Globe And Angle Valves have the same great features of the original High Flow Marshall Excelsior globe and angle valves with additional product performance enhancements. These globe and angle valves provide a positive shutoff that is highly reliable with High Flow performance, bidirectional flow, or reduced product emissions. The Integrated Back Check Feature (IBC) is designed for use in sections of piping where the trapped liquid pressure may exceed 100 PSIG between two valves. When trapped liquid pressure exceeds 100 PSIG, the integrated back check feature automatically bypasses trapped downstream system pressure through the valve seat to the upstream side of the valve into the product container or piping. A closed looped system is created because the 100 PSIG is far below the PSIG set pressure of a hydrostatic relief valve keeping the product in the system and reducing product emissions. Integrated Back Check Feature WARNING: NFPA 58 requires that a hydrostatic relief valve be installed into any section of piping that could allow liquid to become trapped between two shutoff valves. The Integrated Pilot Feature (P) is designed for sections of piping that have bidirectional flow. Standard globe and angle valves installed in bidirectional systems can have a potential for back pressure to build-up on the upstream side of a closed valve. This pressure adds to the force required to open the valve causing additional wear to the valve stem and seat material. The integrated pilot feature allows the first portion of stem travel to unseat the pilot orifice, automatically equalizing the system pressure prior to unseating the valve holder seal. This greatly reduces the opening torque required in bidirectional systems and prevents premature wear of the primary valve seat material and valve components. Integrated Pilot Feature Next Generation 2 Bottom Port Globe Valves Next Generation Globe and Angle Valves 1/4 FNPT 1/4 FNPT 1/2 FNPT Inlet/ Description Side Port A Side Port B Bottom Port Outlet ME825P-16-4 Full Flow Valve w/integrated Pilot Plugged ME825P-16H-4 Full Flow Valve w/integrated Pilot Plugged MEH225 Plugged 2 FNPT ME825P-16HSS-4 Full Flow Valve w/integrated Pilot MEH225SS E Next Generation 2 Bottom Port Globe Valves provide a positive shut-off valve that is highly reliable with full flow performance while providing bidirectional flow. Ideally suited for use on transport trailers with 1/2 blow down lines to provide rapid and complete product evacuation prior to disconnecting the transfer hose. Valves can be purchased with hydrostatic relief valves pre-installed in the side port of the globe valve downstream of the main seal. The valves include a pilot orifice feature to facilitate pressure equalization in sections of system piping that have bidirectional flow or high differential pressures, greatly reducing the opening torque required and preventing premature wear of the valve seat. These valves have all of the great features of the original full flow MEC Globe Valves with additional product performance enhancements. ME825P-16HSS-4 sales@mtankco.com

62 BALL VALVES Ball Valves JOMAR T-204DU FIP X FIP Input Output Type Side Tap T-204DU FIP X FIP 1/2 FNPT* 1/2 FNPT T-204DU FIP X FL 1/2 FNPT 1/2 Flare Dielectric T-203DU FIP X FIP 1/2 FNPT* 1/2 FNPT 1/8 T-203DU FIP X FL 1/2 FNPT 1/2 Flare T-204 FIP X FIP 1/4 FNPT* 1/4 FNPT Threaded T-203 FIP X FIP 3/8 FNPT* 3/8 FNPT* 1/8 T-204 FL X FL 3/8 Flare* 3/8 Flare T-204 FL X FIP 3/8 Flare* 1/2 FNPT Flare T-203 FL X FL 3/8 Flare* 3/8 Flare 1/8 T-203 FL X FIP 1/2 Flare 1/2 FNPT *Size listed is the smallest size in the series. Larger sizes are available. More gas valves are available upon request. Speak to your MTankCo representative for more information. T-203 FL X FL FEATURES: Ideal for use outside in extremely cold climates 2 Viton O-rings 100% leak tested Made in Italy Leakproof stem - LIFETIME WARRANTY Carbon Steel Gas Ball Valve FL-CS JOMAR Size Size FL-CS The FL-CS is a full port, API 607 fire safe certified, NACE MR0175 approved 1/4 turn flanged ball valve. It has a WCB carbon steel body, stainless steel ball and stem, RPTFE seats, blow-out proof stem, and actuator mounting pads. Carbon Steel Gas Ball Valve T-CS-2002N-SS-DUE JOMAR E T-CS-2002N-SS-DUE Size / / / /4 Size / / The T-CS-2002N-SS-DUE is a 1/4 turn, lever handle operated, WCB carbon steel body with stainless steel ball and stem. It has a five-piece, double-union end body design, is 100% full port, with a blow-out proof stem. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 57

63 BALL VALVES Carbon Steel Gas Ball Valve T-CS-1001N-SS JOMAR Size / / / /4 Size / / T-CS-1001N-SS The T-CS-1001N-SS is a 1/4 turn, latch-lock, lever handle operated, two-piece body designed, gas ball valve. This valve has a WCB carbon steel body with stainless steel ball and stem. It is 100% full port with a blow-out proof stem. Carbon Steel Gas Ball Valve S-CS-1000N-SS-4B JOMAR Size / / Size / / S-CS-1000N-SS-4B S-CS-1000N-SS-4B is a 1/4 turn, latch lock, lever handle operated gas ball valve. This valve has a three-piece WCB carbon steel body with four-bolt (swing-out pattern). It is 100% full port, with a stainless steel solid ball and blow-out proof 316 stainless steel stem. Stainless Steel Flanged Gas Ball Valve FL-SS JOMAR Size Size The FL-SS is a 100% full port, API 607 fire safe certified, NACE MR0175 approved, 1/4 turn flanged ball valve. It has a stainless steel body, ball and stem, RPTFE seats, blow-out proof stem, and actuator mounting pads. FL-SS Stainless Steel Gas Ball Valve T-SS-2002N-DUE JOMAR Size / / / /4 Size / / T-SS-2002N-DUE E The T-SS-2002N-DUE is a double union ball valve that is UL approved for flammable liquids including liquid propane, LP gas, anhydrous ammonia, natural and manufactured gas. These valves are designed for industrial applications of steam, water, oil, gas, and corrosive materials. sales@mtankco.com

64 BALL VALVES Stainless Steel Gas Ball Valve T-SS-1000N-4B JOMAR T-SS-1000N-4B Size / / / / Size / / The T-SS-1000N-4B is a quarter turn, lever handle operated, stainless steel gas ball valve. Its latch lock handle can be locked in open or closed positions. It has a three-piece body design, four-bolt (swing-out pattern), full port, stainless steel solid ball, and blow-out proof stainless steel stem. Stainless Steel Gas Vented Ball Valve T-SS-1000N-4B-VB JOMAR T-SS-1000N-4B-VB Size VB 1/ VB 3/ VB 1/ VB 3/ VB 1 Size VB 1-1/ VB 1-1/ VB VB VB 4 The T-SS-1000N-4B-VB is a quarter turn, lever handle operated, stainless steel body, three-piece, four-bolt (swing-out pattern), full port, with threaded connection. This valve has a stainless steel vented solid ball, with blow-out proof stainless steel stem. The latch lock handle can be locked in open or closed positions. Stainless Steel Gas Ball Valve T-SS-1001N JOMAR T-SS-1001N Size / / / /4 Size / / The T-SS-1001N is a two-piece, stainless steel body design with threaded connection. It has a quarter turn, latch-lock, and is lever handle operated. Its ball and stem are stainless steel, has a 100% full port, and blow-out proof stem. E Stainless Steel Gas Ball Valve T-SS-1001N-VB JOMAR T-SS-1001N-VB Size VB 1/ VB 3/ VB 1/ VB 3/4 Size VB VB 1-1/ VB 1-1/ VB 2 The T-SS-1001N-VB is a quarter turn, latch-lock, lever handle operated, two-piece stainless steel gas ball valve with a stainless steel vented ball. It has a 100% full port with a stainless steel blow-out proof stem. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 59

65 BALL VALVES Brass Threaded Gas Ball Valve T-100NE JOMAR Size / / / / /4 Size / / T-100NE Brass Gas Ball Valve T-100FMN JOMAR Size / / /2 Size / T-100NE Brass Threaded Gas Ball Valve T-100S TN with Side Tap JOMAR Size / / Size / / S-100FMN Brass Gas Ball Valve T-82 Mini Input /4 FIP x 1/4 MIP (Screwdriver Slot Handle) /4 FIP x 1/8 MIP (Screwdriver Slot Handle) /8 FIP x 1/8 MIP /4 FIP x 1/8 MIP /4 FIP x 1/4 MIP /4 FIP x 1/4 FIP Bronze Substitute Gas Ball Valve T-100NEG JOMAR JOMAR T-82 Mini E Size NGDZ 1/ NGDZ 3/ NGDZ 1 Size NGDZ 1-1/ NGDZ 1-1/ NGDZ 2 T-100NEG sales@mtankco.com

66 BALL VALVES Blue Top Gas Ball Valves T-3000 LEGEND Size / /2 Size /4 T-3000 The T-3000 is one-piece, heavy duty forged brass valve designed as a gas appliance connector for use with natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures. Blue Top Gas Ball Valves T-3100 LEGEND T-3 1/2 FL X FL Input Output Type Side Tap T-3 1/2 FP X FP 1/2 FNPT 1/2 FNPT T-3 3/4 FP 3/4 FNPT 3/4 FNPT FNPT X FNPT 1/8 T-3 1 FP X FP 1 FNPT 1 FNPT T-3 3/8 FL X 1/2 FIP 3/8 FL 1/2 FIP T-3 1/2 FL X 1/2 FIP 1/2 FL 1/2 FIP T-3 1/2 FL X 3/4 FIP 1/2 FL 3/4 FIP T-3 5/8 (16) FL X 1/2 FIP 5/8 (15/16-16) FL 1/2 FIP Flare X FIP T-3 5/8 (14) FL X 3/4 FIP 5/8 (7/8-14) FL 3/4 FIP T-3 5/8 (16) FL X 3/4 FIP 5/8 (15/16-16) FL 3/4 FIP T-3 3/8 (24) FL X 1/2 FIP 3/8 (9/16-24) FL 1/2 FIP T-3 3/8 FL X 1/2 MP 3/8 FL 1/2 MP T-3 1/2 FL X 1/2 MP 1/2 FL 1/2 MP Flare X MIP T-3 3/8 FL X 3/8 FL 3/8 FL 3/8 FL T-3 1/2 FL X 1/2 FL 1/2 FL 1/2 FL Flare X Flare T-3 5/8 FL X 5/8 FL 5/8 FL 5/8 FL T-3 1/2 FL X FIP The T-3100 Series is one-piece, heavy duty forged brass valve designed as a gas appliance connector. This valve is for use with natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures. E T-3100 FL X FL LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 61

67 HOSE ASSEMBLIES Hose Assemblies Size Description SLP 1/4 2 2 ft. SLP 1/4 3 3 ft. SLP 1/4 4 4 ft. SLP 1/4 5 5 ft. SLP 1/4 6 6 ft. 1/4 Hose Assembly, 3/8 FL EL SLP 1/4 8 8 ft. SLP 1/ ft. SLP 1/ ft. SLP 1/ ft. SLP 3/8 6 6 ft. SLP 3/ ft. SLP 3/ ft. 3/8 Hose Assembly, 3/8 FL EE SLP 3/ ft. SLP 3/ ft. 1/4 Hose Assembly 3/8 Hose Assembly E sales@mtankco.com

68 FITTINGS Pipe Fittings Product Material Galvanized Black Iron Forged Steel (Extra Heavy) Ordering Abbreviation GAL BLK FS ORDERING NOTE: Symbols on the Product Chart to the left denote the materials in which fittings are available. When ordering, add the corresponding prefix to the Item Number to indicate the product material. For example, when ordering a Black Iron, 1/4, 45º Elbow, FIP X FIP order number will be BLK 1/4 45 EL. Contact your MTankCo representative if you are unable to find the part or parts you are looking for. Description 1/8 1/4 3/8 1/2 90 Elbow, FIP X FIP 1/8 90 EL 1/4 90 EL 3/8 90 EL 1/2 90 EL 90º Street Elbow, FIP X MIP 1/8 ST EL 1/4 ST EL 3/8 ST EL 1/2 ST EL 45º Elbow, FIP X FIP 1/8 45 EL 1/4 45 EL 3/8 45 EL 1/2 45 EL 45º Street Elbow, FIP X MIP 1/8 45 ST EL 1/4 45 ST EL 3/8 45 ST EL 1/2 45 ST EL 90º Elbow, Side Outlet, FIP X FIP X FIP 1/8 90 EL SO 1/4 90 EL SO 3/8 90 EL SO 1/2 90 EL SO Tee - Straight, FIP X FIP X FIP 1/8 TEE 1/4 TEE 3/8 TEE 1/2 TEE Service Tee, MIP X FIP X FIP 1/8 SRV TEE 1/4 SRV TEE 3/8 SRV TEE 1/2 SRV TEE Tee, Side Outlet FIP X FIP X FIP X FIP 1/8 SO TEE 1/4 SO TEE 3/8 SO TEE 1/2 SO TEE Cross, FIP X FIP X FIP X FIP 1/8 CRS 1/4 CRS 3/8 CRS 1/2 CRS Description 3/ /4 1-1/2 90 Elbow, FIP X FIP 3/4 90 EL 1 90 EL 1-1/4 90 EL 1-1/2 90 EL 90º Street Elbow, FIP X MIP 3/4 ST EL 1 ST EL 1-1/4 ST EL 1-1/2 ST EL 45º Elbow, FIP X FIP 3/4 45 EL 1 45 EL 1-1/4 45 EL 1-1/2 45 EL 45º Street Elbow, FIP X MIP 3/4 45 ST EL 1 45 ST EL 1-1/4 45 ST EL 1-1/2 45 ST EL 90º Elbow, Side Outlet, FIP X FIP X FIP 3/4 90 EL SO 1 90 EL SO 1-1/4 90 EL SO 1-1/2 90 EL SO Tee - Straight, FIP X FIP X FIP 3/4 TEE 1 TEE 1-1/4 TEE 1-1/2 TEE Service Tee, MIP X FIP X FIP 3/4 SRV TEE 1 SRV TEE 1-1/4 SRV TEE 1-1/2 SRV TEE Tee, Side Outlet FIP X FIP X FIP X FIP 3/4 SO TEE 1 SO TEE 1-1/4 SO TEE 1-1/2 SO TEE Cross, FIP X FIP X FIP X FIP 3/4 CRS 1 CRS 1-1/4 CRS 1-1/2 CRS Description 2 2-1/ Elbow, FIP X FIP 2 90 EL 2-1/2 90 EL 3 90 EL 4 90 EL 90º Street Elbow, FIP X MIP 2 ST EL 2-1/2 ST EL 3 ST EL 4 ST EL 45º Elbow, FIP X FIP 2 45 EL 2-1/2 45 EL 3 45 EL 4 45 EL 45º Street Elbow, FIP X MIP 2 45 ST EL 2-1/2 45 ST EL 3 45 ST EL 4 45 ST EL 90º Elbow, Side Outlet, FIP X FIP X FIP 2 90 EL SO 2-1/2 90 EL SO 3 90 EL SO 4 90 EL SO Tee - Straight, FIP X FIP X FIP 2 TEE 2-1/2 TEE 3 TEE 4 TEE Service Tee, MIP X FIP X FIP 2 SRV TEE 2-1/2 SRV TEE 3 SRV TEE 4 SRV TEE Tee, Side Outlet FIP X FIP X FIP X FIP 2 SO TEE 2-1/2 SO TEE 3 SO TEE 4 SO TEE Cross, FIP X FIP X FIP X FIP 2 CRS 2-1/2 CRS 3 CRS 4 CRS F Street 90º Elbow Elbow Tee Cross LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 63

69 FITTINGS Couplings, Hex Head Plugs, Caps, and Unions Description 1/4 3/8 1/2 3/ /2 Couplings 1/4 CO 3/8 CO 1/2 CO 3/4 CO 1 CO 1-1/2 CO Hex Plugs 1/4 PLUG 3/8 PLUG 1/2 PLUG 3/4 PLUG 1 PLUG 1-1/2 PLUG Caps 1/4 CAP 3/8 CAP 1/2 CAP 3/4 CAP 1 CAP 1-1/2 CAP Unions 1/4 UNION 3/8 UNION 1/2 UNION 3/4 UNION 1 UNION 1-1/2 UNION Coupling Plug Cap Union Bushings, Threaded Pipe, Street Elbow, and Tee Fittings Galvanized Nipple Description 1/4 3/8 1/2 1 Bushing - 3/8 3/8 x 1/4 BU 3/8 x 3/8 BU 3/8 x 1/2 BU 3/8 x 1 BU Bushing - 1/2 1/2 x 1/4 BU 1/2 x 3/8 BU 1/2 x 1/2 BU 1/2 x 1 BU Bushing - 3/4 3/4 x 1/4 BU 3/4 x 3/8 BU 3/4 x 1/2 BU 3/4 x 1 BU Threaded Pipe 18 Long 18 x 1/4 THRD Pipe 18 x 3/8 THRD Pipe 18 x 1/2 THRD Pipe 18 x 1 THRD Pipe Threaded Pipe 24 Long 24 x 1/4 THRD Pipe 24 x 3/8 THRD Pipe 24 x 1/2 THRD Pipe 24 x 1 THRD Pipe Threaded Pipe St. Elbow 1/4 ST EL 3/8 ST EL 1/2 ST EL 1 ST EL Tee 1/4 TEE 3/8 TEE 1/2 TEE 1TEE Nipples Nipple Description 1/4 3/8 1/2 3/4 1 Close 1/4 CL 3/8 CL 1/2 CL 3/4 x CL 1 x CL 1-1/2 Long 1/4 x 1-1/2 3/8 x 1-1/2 1/2 x 1-1/2 3/4 x 1-1/2 1 x 1-1/2 2 Long 1/4 x 2 3/8 x 2 1/2 x 2 3/4 x 2 1 x 2 2-1/2 Long 1/4 x 2-1/2 3/8 x 2-1/2 1/2 x 2-1/2 3/4 x 2-1/2 1 x 2-1/2 3 Long 1/4 x 3 3/8 x 3 1/2 x 3 3/4 x 3 1 x 3 3-1/2 Long 1/4 x 3-1/2 3/8 x 3-1/2 1/2 x 3-1/2 3/4 x 3-1/2 1 x 3-1/2 4 Long 1/4 x 4 3/8 x 4 1/2 x 4 3/4 x 4 1 x 4 4-1/2 Long 1/4 x 4-1/2 3/8 x 4-1/2 1/2 x 4-1/2 3/4 x 4-1/2 1 x 4-1/2 5 Long 1/4 x 5 3/8 x 5 1/2 x 5 3/4 x 5 1 x 5 6 Long 1/4 x 6 3/8 x 6 1/2 x 6 3/4 x 6 1 x 6 7 Long 1/4 x 7 3/8 x 7 1/2 x 7 3/4 x 7 1 x 7 8 Long 1/4 x 8 3/8 x 8 1/2 x 8 3/4 x 8 1 x 8 9 Long 1/4 x 9 3/8 x 9 1/2 x 9 3/4 x 9 1 x 9 10 Long 1/4 x 10 3/8 x 10 1/2 x 10 3/4 x 10 1 x Long 1/4 x 11 3/8 x 11 1/2 x 11 3/4 x 11 1 x Long 1/4 x 12 3/8 x 12 1/2 x 12 3/4 x 12 1 x Long 1/4 x 18 3/8 x 18 1/2 x 18 3/4 x 18 1 x Long 1/4 x 24 3/8 x 24 1/2 x 24 3/4 x 24 1 x Long 1/4 x 30 3/8 x 30 1/2 x 30 3/4 x 30 1 x 30 F sales@mtankco.com

70 SIGHT FLOW SWING CHECK VALVES Sight Flow Swing Check Valves Inlet and Outlet FNPT Seal Material OAL ME875S-16 2 Nitrile 5-3/4 ME875SN-16 2 Neoprene 5-3/4 ME875SV-16 2 Viton 5-3/4 ME875S-24 3 Nitrile 7-3/8 ME875SN-24 3 Neoprene 7-3/8 ME875SV-24 3 Viton 7-3/8 * NC indicates no check e.i. ME875SNC-16 Viton is a trademark of DuPont Performance Elastomers ME875S-16 Marshall Excelsior s Sight Flow Swing Check Valves are designed with the most durable, impact resistant glass in the industry. This sight flow valve allows bulk plant operators an inspection point to visually monitor liquid flow conditions which allows the operator to achieve maximum pump efficiency. They also feature a soft seat swing away check valve which limits flow to one direction. This check valve is usually closed until pressure activates the valve when flow is directed into piping or containers causing the valve to open. When flow stops or reverses, the check returns to the closed position minimizing product loss in the event of a line failure. Installing a sight flow valve upstream of a plant pump, allows the operator to observe product flow and make pump adjustments for maximum flow without the liquid forming vapor bubbles causing uneven flow patterns and significantly reducing efficiency. Additionally, installing a sight flow valve at the loading arm of a plant allows the operator to maintain consistent observation of pump conditions. This valve is suitable for stationary and mobile applications. Installing this valve on a compressor operation will provide a visual indication of when the tank car or transport is emptied of liquid and ready for vapor recovery. FEATURES: Specially formulated, large diameter impact resistant sight glass with O-ring packing seals for maximum safety and visibility Durable ductile iron body with cadmium plated finish All steel and stainless steel construction Rated up to 400 PSI/ WOG Hexagon cast ends for ease of installation F ME /4-3 Flow Indicating Swing Check Valves Description Material Flange Material OAL ME /4 FNPT Flow Indicating Check Valve Ductile Iron 5-3/8 ME FNPT Flow Indicating Check Valve Cast Steel 6-7/8 ME FNPT Flow Indicating Check Valve Ductile Iron 9-5/8 ME /4 FNPT Non-Indicating Check Valve Ductile Iron 5-3/8 ME FNPT Non-Indicating Check Valve Cast Steel 6-7/8 Ductile ME FNPT Non-Indicating Check Valve 9-5/8 Iron ME F lb. Flange Flow Indicating Check Valve 11-7/8 ME F lb. Flange Flow Indicating Check Valve 14-1/8 ME F lb. Flange Flow Indicating Check Valve Ductile Iron 14-1/4 ME F lb. Flange Flow Non-Indicating Check Valve 11-7/8 ME F lb. Flange Flow Non-Indicating Check Valve 14-1/8 ME F lb. Flange Flow Non-Indicating Check Valve 14-1/4 Flow Indicating Swing Check Valves promotes maximum pump efficiency by providing system operators with a visual inspection point for monitoring liquid flow conditions as well as providing a soft seat back check valve to prevent reverse product flow. Installation of a flow indicating swing LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 65

71 SIGHT FLOW SWING CHECK VALVES check valve upstream of the pump allows the operator to observe product flow and make pump adjustments for maximum flow without cavitation. Suitable for stationary and mobile applications. FEATURES: Powder coated ductile iron body for maximum durability Removable flanged ends for easy field service Integral swing away check valve with soft seat to promote maximum product flow and prevent reverse product flow All stainless steel, corrosion resistant internal component construction Magnetically coupled flow indicator for maximum protection against leaks and minimal resistance to product flow Easy to read flow indicator with Glow arrow shows if valve is open/closed UL Listed for use with LP Gas and Anhydrous Ammonia PSI WOG ME /4 & 1 Flow Indicating Swing Check Valves Description Material OAL ME /4 FNPT Flow Indicating Check Valve Ductile Iron 4-3/4 ME FNPT Flow Indicating Check Valve Ductile Iron 4-3/4 3/4 and 1 Flow Indicating Swing Check Valves promote maximum pump efficiency by providing system operators with a visual inspection point for monitoring liquid flow conditions as well as providing a soft seat back check valve should product flow reverse for any reason. Installation of a flow indicating swing check valve upstream of the pump, allows the operator to observe product flow and make pump adjustments for maximum flow without cavitation. Suitable for stationary and mobile applications. ME981-6 FEATURES: Powder coated ductile iron body with cast hexagonal ends for maximum durability and ease of installation Integral swing away check valve with soft seat to promote maximum product flow and minimize product loss in the event line failure All stainless steel, corrosion resistant internal component construction Indicator clearly shows if valve is open/closed UL Listed for use with LP Gas and Anhydrous Ammonia PSI WOG Flo-Chek Valves CORKEN Inlet and Outlet FNPT Seal Material OAL FC /4 5-1/16 FC /2 5-1/16 FC /2 Ductile Iron FC /2 8-1/2 FC /4 FC /4 The Corken Flo-Chek Valve enables you to detect flow in the gas or liquid lines and it prevents release of product from the storage tank in the event of a hose failure. Flo-Chek Valve F sales@mtankco.com

72 GAUGES & ACCESSORIES Accu-Max Float Gauges ME Glow Technology Standard Dial Type Style Dial Face Dial Size Tank Diameter ME Standard Glow/Black 72 ME Standard Glow/Black 79 ME Standard Glow/Black 84 DOT 4 ME930C-72 Classic Silver/Black 72 ME930C-79 Classic Silver/Black 79 ME930C-84 Classic Silver/Black 84 ME Standard Glow/Black 108 ME Standard Glow/Black 130 ASME 8 ME940C-108 Classic Silver/Black 108 ME940C-130 Classic Silver/Black 130 Accu-Max Limited Warranty: Marshall Excelsior warrants Accu-Max float gauges and repair kits to the original buyer to be free of defects in material and workmanship under normal service and use for two years from manufactured date. Accu-Max Float Gauges are designed to measure liquid levels within horizontal DOT and Stationary ASME Tanks with fluid capacities above 2,300 gallons. For maximum gauge life, the float arm features an integral spring-loaded shock absorber for harsh over-the-road applications. The standard dial face features a black background for reduced glare with glow technology providing an easy to read glow in the dark dial face, perfect for low light situations. An optional classical style dial face is available. These gauges are suitable for use in bobtail, transport, railcar and bulk storage applications. NOTE: Gauges must be installed on the centerline of the tank s side or end for accurate readings. ME930 DOT Series Classic Dial FEATURES: All stainless steel construction Welded tube to coupling design for maximum strength and durability Dial face 100% sealed and argon filled to prevent moisture build-up and fogging Factory set and precision tuned for superb accuracy Dial face and mounting hardware universal with other industry standard gauges Mounts to all standard 8 bolt tank flange adapters Custom length tank configurations available upon request for 30 to 300 I.D. tank Float Gauge Accessories Connection Connection ME /2 MNPT 1/2-13 Female ME932 Weld 1/2-13 Female * Alternate spring ranges available. ME931 These Float Gauge Accessories are designed for mounting float gauges in DOT or ASME tanks. These zinc plated steel 8 bolt mounting flanges feature 1/2-13 threads for easy installation. F ME931 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 67

73 GAUGES & ACCESSORIES Trans-Max Accu-Max DOT & ASME Stationary Float Gauges Description Dial Face Tank Diameter ME930WG ME930WG-79 DOT Float Gauge Assembly Glow/Black 79 ME930WG ME930CWG ME930CWG-79 DOT Float Gauge Assembly (Classic) Silver/Black 79 ME930CWG ME940WG Stationary Float Gauge Assembly Glow/Black ME940WG ME940CWG Stationary Float Gauge Assembly (Classic) Silver/Black ME940CWG Accu-Max Limited Warranty: Marshall Excelsior warrants Accu-Max float gauges and repair kits to the original buyer to be free of defects in material and workmanship under normal service and use for two years from manufactured date. ME930WG DOT Series ME940WG ASME Series Accu-Max Float Gauges Trans-Max Series measure liquid levels within horizontal DOT and Stationary ASME Tanks with 1 FNPT tank gauge port openings. Designed to replace rotary style gauges in tanks with fluid capacities greater than 2,300 gallons. Suitable for use in bobtail, transport, and bulk storage applications. Marshall Excelsior s exculsive wedge design allows for easy installation while greatly reducing time spent inside the vessel. NOTE: The heavy duty design of this gauge requires entering vessel through manway during installation. FEATURES: All stainless steel construction for use with LPG and NH 3 applications Welded tube to coupling design for maximum strength and durability Installation requires manway Converts rotary style gauge to heavy duty Accu-Max style for both mobile and stationary applications Integral spring-loaded shock absorber for arduous over-the-road application Easy to read flow indicator with Glow arrow shows if valve is open/closed Easy to assemble Dial face 100% sealed and argon filled to prevent moisture build-up and fogging Factory set and precision tuned for superb accuracy Dial face and mounting hardware universal with other industry standard gauges Mounts to all standard 1 NPT tank coupling adapters Custom lengths available upon request Available with classic style dial face Patent Pending Wand F sales@mtankco.com

74 GAUGES & ACCESSORIES LPG Float Gauges Flanged Four Bolt Model CAVAGNA GROUP Nominal Diameter Tank Container Capacity Dimension (mm) Ø Inches Ø mm Type Gallons Liters A B 2069.U U / /1, U Horizontal 500 1, U 41 1, ,000 3, U 48 1, U Vertical Float gauges flanged four bolt models include a mounting. LPG Threaded Float Gauges CAVAGNA GROUP Nominal Diameter Tank Container Capacity Dimension (mm) Container Ø Inches Ø mm Type Gallons Liters A B Connection 2069.U U / /1, U Horizontal 500 1, U1 41 1, ,000 3, U1 48 1, U Vertical 2076.U SO.U1 Horizontal * * 20SV.U1 Vertical * * 2069.U1-1/ U1-1/ / /1, U1-1/ Horizontal 500 1, / U1-1/4 41 1, ,000 3, U1-1/4 48 1, All Level Gauges are produced in compliance with the CEN TC 286-prEN standard. The float is made in SPANSIL rubber. This kind of material cannot be detached from its lodging when in touch with caustic soda. These level gauges have been manufactured in accordance with the best available technology: a tropicalized zamac has been used both for the head and the gearing. F LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 69

75 GAUGES & ACCESSORIES Rotary Gauge System CAVAGNA GROUP Length in Inches Model (Diameter of Tank) Number 68 O-31 L O-31 L O-31 L O-31L Dial only LP O-323 Cavagna Group rotary gauges can be used on stationary or mobile tanks to visually indicate the amount of LP-Gas in the container. They are also used in filling the tank to the proper liquid level. On mobile applications and some large stationary storage tanks, hangers are recommended to support the horizontal length of the dip tube. The gauge is operated by opening the small bleed orifice when the tube is in the vapor space of the tank. Moving the pointer on the dial causes the end of the tube to move until it contacts liquid in the container. At that point, discharge from the bleed orifice turns from vapor to liquid and the rotary gauges dial gives the volume percentage of liquid in the tank. Gauges fit 1 coupling container connections. All gauges have stem and dip tubes with an extra large inside diameter. This assures that the correct liquid level can be obtained quickly. GAUGES & ACCESSORIES ORDERING INFORMATION for Taylor Products - Visible Gauges Order Visible Gauges by their code/item number. Code/item numbers are stamped on the heads of all gauges. Gauges produced before 2008 are stamped on the top of the head and those produced after 2008 are stamped on the sides of the head. Location of code/item number Old Style New Style F sales@mtankco.com

76 GAUGES & ACCESSORIES 2-1/32 Bolt Circle GAUGE SIZE 2-1/2 Bolt Circle ORDERING INFORMATION for other gauges and pressure vessel gauges If the code is not easily visible, specify the following when ordering: 1. Type of Service - LP-Gas or Anhydrous Ammonia (NH 3 ). Junior Head - 4 Bolt (End Mount) H MOUNTING LOCATION H Dimension (Top Mount) (Side Mount) VERTICAL DOT Senior Head - 4 Bolt H (Angel Mount) 2. Gauge Size or Head Type - Specify Junior Size, Senior Size, Visible 4, 3/4 Threaded, 1 Threaded, 1-1/4 Threaded, Roadmaster or Master Gauge Model (4 bolt or 8 bolt). 3. Type Mounting - Top, side, end, or angle (if angle, specify angle above horizontal center line). 4. Provide Dimensions H = Distance from tank surface to gasket surface. D = Inside diameter of tank or cylinder. 5. Dimensions for Vertical Cylinders only: X = Distance from center of adaptor to nearest inside wall. O = Cylinder height. H = Distance from tank surface to gasket surface. X Distance H Dimension Hemispherical O Height Footing Semi-Ellip. Distance Angle Horizontal Centerline Float Gauges for Lift Truck Cylinders TAYLOR PRODUCTS JU160B Tank Type Junior Head 3/4 NPT 1-1/4 NPT Size No. Service JD060A TD060A 20, 33, 43 Horizontal JU160B UU160B TU160B 33 Universal JU212A UU212A TU212A 43 Universal JA216A 43 Vertical JU086B TU086B 20 Universal Domestic Gauge TAYLOR PRODUCTS F JA1241 Tank Tank Junior Senior Screw In 1 Screw In 1-1/4 Size No. Diameter JA124l TA130AP Horz 420# 24 JA154A SA160A HA156AP* TA156AP* 250, JA192J SA194A HA194AP TA194AP JA206l SA214A HA210AP TA210AP JA250J SA230E HA254JP TA254NS Vert 420# 30 *Denotes drop in dial LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 71

77 GAUGES & ACCESSORIES Universal Dial Kits TAYLOR PRODUCTS Dial Size Description 13000S Junior Squibb Senior Squibb Junior Squibb Kit Senior Squibb Kit Junior JR Blank Flange Senior SR Blank Flange Road Master Gauges TAYLOR PRODUCTS Part No. Tank Diameter RM RM RM RM RM RM RM RM RM RM RM RM Road Master Gauge Eliminator Direct-reading Float Gauge TAYLOR PRODUCTS Part No. Tank Diameter EL EL EL EL EL EL EL EL EL EL EL EL EL EL EL EL EL The Eliminator Direct-reading Float Gauges are used to determine when the maximum fill level has been reached in large tanks up to 96. These gauges are not to be used in filling tanks. Eliminator Gauge Back of Eliminator Gauge F sales@mtankco.com

78 GAUGES & ACCESSORIES LPG Float Gauges - FG3981 Series SHERWOOD LGP PRODUCTS Gauge Face Container Gallons Nominal Cylinder Diameter Gauge Head Style Replacements* FG R R-KIT FG R Threaded R-KIT FG R NPT R-KIT FG R 1, Brass Head R-KIT FG R 420# Vertical R-KIT (% of Total Volume) *Replacement kit - includes one dial and two screws Sherwood s LGP Float Gauge FG3981 Series for ASME Domestic Tanks and DOT Cylinders come with 1 NPT mounting and are remote-ready. FG3981 Series FEATURES: Solid brass mounting head Ultra-low friction, smooth-acting, non-jamming gear design Hermetically sealed, easily readable dial Teflon coated, free-floating shaft Solid float; no metal shell to corrode or leak In-service replaceable dial kit available (see chart), which does not require taking float gauge or tank out of service LPG Float Gauges - FG1281 Series SHERWOOD LGP PRODUCTS Gauge Face Container Gallons Nominal Cylinder Diameter Gauge Head Style Replacements* FG R 120, FG R FG R FG R 1, FG R FG R FG R FG R 1, *Replacement kit - includes one dial and two screws 8-1/2 15-1/ R-KIT Sherwood s LGP Float Gauge FG1281 Series for ASME Domestic Tanks have brass junior head mounting and are remote-ready. FG1281 Series FEATURES: Solid brass mounting head Ultra-low friction, smooth-acting, non-jamming gear design Hermetically sealed, easily readable dial Teflon coated, free-floating shaft Solid float; no metal shell to corrode or leak In-service replaceable dial kit available F LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 73

79 GAUGES & ACCESSORIES LPG Float Gauges - FG2281 Series SHERWOOD LGP PRODUCTS Container Gallons Nominal Cylinder Diameter Gauge Head Style FG R 120, FG R 200, 250, FG R FG R 1, *Replacement kit - includes one dial and two screws Threaded 1-1/4 NPT Brass Head Sherwood s LGP Float Gauge FG2281 Series for ASME Domestic Tanks and DOT Cylinders come with 1 NPT mounting and are remote-ready. FEATURES: 1 NPT mounting Remote-ready capability Solid brass mounting head Ultra-low friction, smooth-acting, non-jamming gear design Hermetically sealed, easily readable dial Teflon coated, free-floating shaft Solid float; no metal shell to corrode or leak FG2281 Series LPG Float Gauges for Lift Truck Cylinders SHERWOOD LGP PRODUCTS FG U FG R Description Propane Capacity Nominal Cylinder Gauge Head and Mounting Style Diameter Style Junior Head 33-1/2 Universal 12 FG U* 1-1/4 33-1/2 Universal 12 *Replacement kit for FG U - includes one dial and two screws Junior Brass Head Threaded 1-1/4 NPT Brass Head Sherwood s LGP Float Gauges for Lift Truck Cylinders come with 1 NPT mounting. FEATURES: Solid brass mounting head Ultra-low friction, smooth-acting, non-jamming gear design Hermetically sealed, easily readable dial Teflon coated, free-floating shaft Solid float; no metal shell to corrode or leak FG U FG FG F sales@mtankco.com

80 PUMPS G FG1281 Series 1 Pumps BLACKMER Capacity Pump Delivery in GPM Description Range Speed 50 PSI 100 PSI (GPM) (RPM) DIFF DIFF LGF1 LGB1 LGF1P LGB1P 1 Flanged Mounted 1 Bracket Mounted 1 Flanged Mounted 1 Bracket Mounted Blackmer s 1 Pumps are ideal for cylinder-filling, motor fueling and for supplying small vaporizers. These pumps are fitted for both LP-Gas and anhydrous ammonia service. 1 Pump Assemblies with Base Mounting BLACKMER Standard Pump Delivery in GPM Description Motor Speed 50 PSI 100 PSI Size (HP) (RPM) DIFF DIFF 1LGB1D1 1 Bracket Mounted LGL /2 Foot Mounted LGB Series LGB Series Pumps have brackets for foot mounting to a conventional baseplate. Motors ordered for these units are furnished to customer specifications. Standard motors listed here are single phase and explosion-proof. LGF Series 1 Pump Assemblies with C-Face Mounting BLACKMER Appox. Delivery in GPM Description Motor Motor 50 PSI 100 PSI Size (HP) Speed DIFF DIFF 1LGF11 1LGF1P1 1 Flanged Mounted LGF1P The LGF Series Pumps mount directly to standard C-face, 1750 rpm motors with flexible coupling. They are UL Listed and are suitable for continuous duty. An explosion-proof switch for remote mounting is provided. 1-1/4 & 1-1/2 Pump Assemblies with Base Mounting BLACKMER Standard Pump Delivery in GPM Description Motor Speed 50 PSI 100 PSI (GPM) (RPM) DIFF DIFF 3LGL125D2 1-1/4 Foot Mounted LGL150D3 1-1/2 Foot Mounted LGL Series The 3LGL125D2 and 3LGL150D3 is the foot-mounted version of the LGL125 and LGL150 Series Pumps. The pump is mounted to a steel baseplate and furnished with a flexible shaft coupling and connected to a standard motor. A coupling guard is included. Listed motors are three phase and explosion-proof. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 75

81 PUMPS 1-1/4 & 1-1/2 Pumps BLACKMER Capacity Pump Delivery in GPM Description Range Speed 50 PSI 100 PSI (GPM) (RPM) DIFF DIFF LGL /4 Foot Mounted LGL /2 Foot Mounted Blackmer s 1-1/4 and 1-1/2 Pumps offer higher capacities than the LFG1/B1 Series pumps. They are suited to a variety of small transfer jobs, but are especially popular for multi-purpose cylinder-filling systems. LGL125 G 1-1/2 High Pressure LPG Pump BLACKMER Description Capacity Range (GPM) Inlet Discharge LGL158A 1-1/2 Foot Mounted , 300# Flanged 1-1/2, 300# Flanged APPLICATIONS: Single and dual hose fuel dispenser Aerosol filling Vaporized feed Underground tank applications Above ground tank applications Other high differential pressure liquefied gas applications LGL158A 2, 3 and 4 Pump Assemblies with Base Mounting BLACKMER Description Motor Size* Pump Delivery in GPM Speed 50 PSI 100 PSI (RPM)** DIFF DIFF 3LGLD2VB HP 660, , 50 57, 41 2 Base Mounted with V-Belt Drive 3LGLD2VB5 5 HP 420, , 30 30, 23 3LGLD3VB15 15 HP 640, , , 84 3 Base Mounted with V-Belt Drive 3LGLD3VB10 10 HP 420, ,59 60, LGLD4VB20 20 HP Base Mounted with V-Belt Drive LGLD4VB15 15 HP *Recommended motor size **With 1750 RPM Motor Blackmer s 2 and 3 Pump Assemblies with Base Mounting units have high-torque V-belts and quick disconnect sheaves. Units come complete with belt guard, pump mounted to base plate, and mounted to standard motor. The 4 Pump Assemblies with Base Mounts have high-torque V-Belts and quick disconnect sheaves. Sheaves and hubs are a two-part assembly that comes apart easily. Units come complete with belt guard, pump mounted to base plate, and mounted to standard motor. LGL158A sales@mtankco.com

82 PUMPS 2 & 3 Pumps - Double Ended Shaft BLACKMER Capacity Pump Delivery in GPM Description Range Speed 50 PSI 100 PSI (GPM) (RPM) DIFF DIFF LGLD2 1-1/4 Foot Mounted LGLD3 1-1/2 Foot Mounted G LGLD2 The 2 and 3 Double Ended Shaft Pumps are ideal for bulk plant service, multiple cylinder filling applications, vaporizers, bobtails, and transports. 3 Truck Pump BLACKMER TLGLF3 Description Delivery in GPM Capacity Pump Range Speed 50 PSI HP 100 PSI HP (GPM) (RPM) DIFF REQD. DIFF REQD Flange Mounted LGL158A The TLGLF3 Series Pump flange mounts directly to the truck tank in combination with the flanged internal control valve. Because it eliminates the intake line and related restrictions to flow, it also eliminates the cavitation problems caused by them. That means longer pump life and higher effective pump capacity. 4 Pump - Double Ended Shaft BLACKMER Capacity Pump Delivery in GPM Description Range Speed 50 PSI 100 PSI (GPM) (RPM) DIFF DIFF LGLD4 4 Foot Mounted LGLD4 The LGLD4 Pump Series is suitable for handling both LP-Gas and anhydrous ammonia. These models are used in bulk plant applications where high transfer rates are desirable. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 77

83 PUMPS 4 Truck Pump BLACKMER TLGLF4 Description Delivery in GPM Capacity Pump Range Speed 50 PSI HP 100 PSI HP (GPM) (RPM) DIFF REQD. DIFF REQD Flange Mounted The TLGLF4 Series Transport Pump is designed to mount to 4 internal valves. It is suitable for both LP-Gas and anhydrous ammonia service. Ideal intake conditions assure maximum pumping rates and the shortest possible transport turnaround time. TLGLF4 G For more information on Blackmer products or installation instructions contact your MTankCo. representative. sales@mtankco.com

84 PUMPS Pump Parts List BLACKMER G Blackmer Parts List for pump models: LGF1E, LGB1E, LGF1PE, LGB1PE, LGF1D, LGB1D, LGF1PD, LGB1PD, LGF1C, LGB1C, LGF1PC, LGB1PC Ref Part Parts Per Part Name No. No. Pump Adjusting Screw Relief Valve (R/V) Locknut Adjusting Screw Cover R/V 1 4A O-ring Spring Guide Spring Guide R/V Spring R/V Valve R/V 1 9A Disc R/V O-ring R/V Cover Cylinder LGF1, LGB Cylinder LGF1P, LGB1P Rotor and Shaft Assembly, Six Vane 2 (Includes Ref. Numbers 24A and 24B) Vane Duravane (Std.) 3 4, Head Capscrews Head Ball Bearing 2 24A Locknut Bearing 2 24B Lockwasher Bearing Gasket Bearing Cover Bearing Cover Capscrews Bearing Cover 4 Ref Part Parts Per Part Name No. No. Pump 28A Bracket Mounting Screws 4 28B Bracket Mounting Screws 4 28C Guard Screw Coupling Half Pump Coupling Half Motor (56C) Coupling Half Motor ( TC/184C) Coupling Spider Key Shaft O-ring Head Gage Plug (1/4 ) 2 73A Gage Plug (3/4 ) Grease Fitting 2 76A Grease Relief Fitting Grease Seal Bracket - (Base Mount) - LGB1(P)D Bracket (C-Faced Footless) - LGF1(P)D 1 108A Capscrews Bracket 4 108B Bracket (C-Faced Footed) Guard Tool - Locknut Kit Maintenance (4-Vane) Kit Maintenance (6-Vane) 1 Included in Maintenance Kit 2 Discontinued D and C models shipped with a 4-vane rotor. The current 6-vane rotor is fully interchangeable as long as the slotted vanes (pn ) are used. 3 The current slotted vanes (pn ) may be used in either the 6-vane or 4-vane rotors. The discontinued solid vanes may be used in the 4-vane rotors ONLY. Always install the vanes with the slot facing the direction of rotation. 3 To fit the LGB1(P)C, LGF1(P)C use: Ref. No / respectively, Ref. No , Ref. No , Ref. No , Ref. No , Ref. No. 28A and B , Ref. No. 73A , and Ref. No / respectively. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 79

85 PUMPS Pump Parts List BLACKMER G Mechanical Seal Mounting Bracket Pump Parts - Mechanical Seal BLACKMER Pump Parts - Mounting Bracket BLACKMER Ref Part Parts Per Part Name No. No. Pump Mechanical Seal Assembly 2 153A Jacket Assembly Seal 2 153B Stationary Seat (Steel) 2 153D O-ring Stationary Seat (Buna-N) 2 153F Seal Face (Carbon) 2 153G O-ring Rotating (Buna-N) 2 1 Included in Maintenance Kit * Reference numbers 153A, 153B, and 153F are not available Ref Part Parts Per Part Name No. No. Pump 108B Bracket (C-faced footed) LGF1(P)D 1 Blackmer Mechanical Seal Parts List for pump models: LGF1E, LGB1E, LGF1PE, LGB1PE, LGF1D, LGB1D, LGF1PD, LGB1PD, LGF1C, LGB1C, LGF1PC, LGB1PC sales@mtankco.com

86 PUMPS Pump Parts List for Pump Model TLGLF3C BLACKMER G Ref Part Parts Per Part Name No. No. Pump Cover - Relief Valve (R/V) Capscrew - R/V Cover Spring - R/V Valve - R/V O-ring - R/V Cover Casing Rotor and Shaft Assembly Vane - Duravane Head Capscrews - Head Ball Bearing 2 24A Locknut - Bearing 2 24B Lockwasher - Bearing Gasket - Bearing Cover Bearing Cover Capscrews - Bearing Cover Key - Shaft Liner Flange - 2 NPT Flange - 2 Slip-on Weld Flanged Elbow - 2 NPT Flanged El - 2 Socket Weld Blank Flange for Auxiliary Inlet 1-2 Ref Part Parts Per Part Name No. No. Pump 42A ,3 O-ring Flange 2-5/8 x 2-7/8 (current) O-ring Flange 2-1/2 x 2-3/4 (older pumps) 2 42B Capscrew - Flanges Disc O-ring - Head Gage Plug Key - Liner Grease Fitting 2 76A Grease Relief Fitting Push Rod Grease Seal Dirt Shield Shaft Protector Tool - Locknut Kit Maintenance Kit Maintenance with R/V Kit Rebuild Kit Rebuild with R/V 1 Included in Maintenance Kit and Rebuild Kit 2 Included in Rebuild Kit 3 Larger O-ring introduced October Additional parts included in Kits with R/V 5 Includes reference number 24A and 24B LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 81

87 PUMPS Mechanical Seal Parts for Pump TLGLF3C BLACKMER Ref Part Parts Per Part Name No. No. Pump Mechanical Seal Assembly 2 153A ** Stationary Seat (Steel) 2 153B ** Seal Face (Carbon) 2 153C ** Jacket Assembly 2 153D O-ring - Stationary (Buna-N) 2 153E O-ring - Rotating (Buna-N) 2 1 Included in Maintenance Kit and Rebuild Kit **Mechanical Seal Ref. No. 153 is only sold as a complete assembly. Ref. No. 153A, 153B, and 153C are not available as separate replacement parts. Mechanical Seal Parts G Optional Hydraulic Motor Adapter Parts for Pump TLGLF3C BLACKMER Ref No. Part No. Part No. Parts 1-1/4 Hyd 1-1/4 Hyd Part Name Per Motor Shaft Motor Shaft Pump * Hydraulic Motor Adapter Kit * 26A Gasket Hydraulic Motor Adapter 1 28A Capscrew Hydraulic Motor Adapter/Head Coupling w/ Setscrew Straight Key Hyd. Motor Shaft N/A Key Coupling Grease Fitting 1 76A Grease Relief Fitting Hydraulic Motor Adapter SAE A Flange 1 135A Capscrew Adapter/Motor 2 *Hydraulic Motor Adapter Kits shipped prior to Spring 2002 were a two two-piece design. Optional Hydraulic Motor Adapter Parts sales@mtankco.com

88 PUMPS Coro-Flo C Model CORKEN G C-Model C-Models Gal./Min. On-Off FNPT FNPT at 50 lb. HP PH Volts Switch Inlet Outlet Differential C /4 6.5 C /230 Yes 15 1 C /2 22 C /460 No 32 Corken s LPG Coro-Flo C Model Series are regenerative turbine liquid pumps with NPT or 300# ANSI flange connections. They are for cylinder filling, bottle filling, and dispenser cabinet applications. FEATURES: Handles liquefied gasses without flashing Floating impeller has long life and low maintenance Heavy duty bearings Space saving compact design TECHNICAL SPECIFICATIONS: Inlet: C10: 1-1/4 NPT, C12 through C14: 1-1/2 NPT, 300# ANSI optional; Outlet: 1 NPT, 300# ANSI optional; RPM: 60 Hz, limited use in RPM; Max. Working Pressure: 400 PSIG (27.6 bar); Max. Differential Pressure: C10: 75 PSIG (5.2 bar), C12: 100 PSIG (6.9 bar), C13,C14: 125 PSIG (8.6 bar); Driver Range: 1-3 hp (0.75 to 2.2 kw); Temperature Range: -25 to 225 F (-32 to 107 C); Flow Range: 3 to 8 GPM (7.6 to L/min) Coro-Flo F Model CORKEN FNPT Inlet FNPT Outlet Gal/Min at 20 lb. Differential F /4 12 F F / F F-Model Corken s LPG Coro-Flo F Model Series are regenerative turbine liquid pumps with NPT or 300# ANSI flange connections. The pumps are either foot mounted (F-Models) or direct mounted (DS- or DL- Models). Applications for these pumps include under and aboveground, autogas dispensing, multiple cylinder filling stations, vaporizer feed-high pressure, and direct, high pressure asphalt burner feed. FEATURES: Handles liquefied gasses without flashing High flows and differential pressures are ideal for dual hose and multiple dispensers Heavy duty bearings Single mechanical seal allows easy replacement and maintenance Floating impeller has long life and low maintenance TECHNICAL SPECIFICATIONS: Inlet: F/DS/DL 9 through 10, 1-1/4 NPT; F/DS/DL 12 through 14, 1-1/2 NPT; 1 NPT, 1 or 1-1/2 300# ANSI optional; Outlet: 1 NPT, 300# ANSI optionai; RPM: 60 Hz, 50 Hz; Rotation: Clockwise only; Max. Working Pressure: 400 PSIG (27.6 bar); Max. Differential Pressure: 150 PSIG (10.3 bar)1; Optional Driver range: 1-10 hp (0.75 to 7.5 kw); Temperature Range: -25 to 225 F (-32 to 107 C); Flow Range: 2 to 36 GPM (7.6 to L/min); Maximum Viscosity: 400 SSU (88 cst) LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 83

89 PUMPS Z3200 and ZH3200 Truck Pumps CORKEN Pump Differential Approximate Delivery Brake HP Pump Torque Speed Pressure of Propane* Required Required RPM PSI (KPA) GPM (L/Min) BHP (KW) T LB (N M) Z3200 and ZH3200 *Delivery times are approximate (345) 112 (424) 6.2 (4.6) 43.4 (58.9) (689) 99 (375) 9.9 (7.4) 69.3 (94.0) (345) 95 (360) 5.2 (3.9) 42.0 (57.0) (689) 84 (318) 8.2 (6.1) 66.3 (89.9) (345) 86 (326) 5.0 (3.7) 41.3 (56.0) (689) 76 (288) 7.8 (5.9) 64.8 (87.9) (345) 70 (265) 3.8 (2.8) 39.9 (54.1) (689) 62 (235) 5.8 (4.3) 60.9 (82.6) Corken s Z3200 and ZH3200 Model Series control thrust loads and cavitation to ensure extended pump life. The Z pump thrust bearing design is rated up to 4000 lb. of thrust. These pumps last longer, are superiorly quiet, and need service less often than other pumps because of their new materials and design. Z3200 G Z4200 Truck Pumps CORKEN Pump Differential Approximate Delivery Brake HP Pump Torque Speed Pressure of Propane* Required Required RPM PSI (KPA) GPM (L/Min) BHP (KW) T LB (N M) (345) 369 (1,397) 12.5 (9.3) 87 (118.0) (689) 325 (1,230) 25.1 (18.6) 175 (237.3) Z (345) 316 (1,196) 10.8 (8.0) 87 (118.0) (689) 278 (1,052) 21.7 (16.1) 175 (237.3) (345) 289 (1,094) 9.9 (7.3) 87 (118.0) (689) 254 (961) 20.0 (14.8) 175 (237.3) (345) 236 (893) 8.3 (6.2) 87 (118.0) (689) 208 (787) 16.7 (12.4) 175 (237.3) Z4200 *Delivery times are approximate The Z4200 Truck Pump is used on transports requiring capacities of 200 to 400 GPM. It is designed with 300 lb. ANSI flanges for maximum strength. The belly-mount flange design minimizes cavitation and increases pumping efficiency. sales@mtankco.com

90 PUMPS Coro-Vane Stationary Pump 521E Series CORKEN G E21E Inlet Outlet Internal Relief Shipping Weight 521E 2, 2-1/4 2, 2-1/2, 1-1/2 Yes 132 lb. NOTE: Add 103 after the prefix Item Number to indicate baseplate-motor slide base, v-belt, and pulleys with belt guard, i.e. 521E103. Corken s Coro-Vane Pumps are positive displacement pumps typically used for cylinder filling, loading and unloading of bulk trucks, and transport trailers. They produce a maximum differential pressure of 125 PSIG. FEATURES: Floating rotor requires no adjusting or shims Hydraulically actuated vanes O-ring gasket construction Ductile iron pump body Self-adjusting sliding vanes RPM Gal/Min (5 HP Motor) Differential Pressure No troublesome pins or springs behind blades Run up to 950 RPM Replaceable liner Coro-Vane Stationary Pump FF Series CORKEN Inlet Outlet Mounting Shipping Weight FF075 FF /2 ANSI 1 ANSI Frame Mount 63 lb. FF075 Corken s FF075 and FF150 Series are are positive displacement pumps. They produce a maximum differential pressure of 125 PSIG and are typically used for cylinder filling, loading and unloading of bulk trucks, and transport trailers. These pumps have the option of belt drive or gear drive with reducer. FEATURES: Stainless steel impeller, sleeve, seal housing, and shaft Ductile iron pump body and rotors Self-adjusting sliding vanes Run up to 950 RPM Replaceable liner FF150 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 85

91 PUMPS Coro-Vane Stationary Pump Z Series CORKEN RPM Temperature Maximum Range Range Working Maximum Maximum Flow Differential Driver Range Pressure Pressure Size Z F 400 PSIG 150 PSID 20 HP PGM Z F 400 PSIG 125 PSID 25 HP PGM The Z3500 Stationary and Truck Pump is a 3 pump designed for stationary and foot mounted truck applications. It has a locked rotor design to ensure long pump life and excellent performance. With higher flow rates than other 3 pumps, the Z3500 retrofits Corken s and other competitive pumps with little or no change in piping. The Z3500 Pump is used for loading and unloading single and dual bobtails and road tankers. The Z4500 Stationary Pump is a 4 pump designed for transport loading and multiple bobtail loading applications. If you have two or more bulkheads to load bobtails and transports and would like to shorten your fill times, then the Z4500 is the stationary pump for you. The Z4500 can fill two 3,000 gallon bobtails in 20 minutes or less at typical operating RPMs. Z3500 G Z3500 AND Z4500 FEATURES: Large diameter non-metallic pins allows higher RPM operation Easy inspection and maintenance Cam and blades are made of high tech materials, extending the life of the pump Reversible side-plates add twice the life Patented needle roller thrust bearings rated for 4,000 lb. minimizing sideplate wear No field adjustment is required Up to 7% or more capacity at 640 RPM Rated up to 800 RPM Replaceable liner Z4500 sales@mtankco.com

92 CORKEN PUMP REPAIR PARTS Coro-Flo Pump Repair Parts - C and F Models CORKEN G Pump No. Seal Kit Brass Impeller C Model Motors Motor HP C F C F12 113CXA C F13 C * 3 F14 *C model motors are single phase, except for the C HP Coro-Vane LPG Z Series Pump Repair Kits CORKEN Part Description Z200 Z3200 Z3500 Z4200 and Z4500 Repair Kit No. 3193X1 Repair Kit No. 3195X1 Repair Kit No. 3195X2 Repair Kit No. 3197X1 Seal Assembly (Qty) 4431XA2 (2) 4431XA2 (2) 4431XA2 (2) 4464XA2 (2) Roller Bearing (Qty) 2754X (2) 2754X (2) 2754X (2) 4460X (2) Outer Race Thrust Bearing (Qty) 4432 (2) 4432 (2) 4432 (2) 4453 (2) Thrust Bearing Mtg Ring (Qty) 4435 (2) 4435 (2) 4435 (2) 4454 (2) Grease Seals (Qty) 4441 (2) 4441 (2) 4441 (2) 4463 (2) Blades/Vanes (Qty) 4428 (6) 4232 (6) 3936 (6) 4448 (6) Blade/Vane Driver (Qty) 4262X (3) 4262X (3) 5554X (2) 4449X (5) Sideplates (Qty) *4427 (2) *4231 (2) *3938 (2) *4446 (2) Case O-ring (Qty) *2-261A (2) *2-262A (2) *2-268A (2) *2-270A (2) Inlet Flange O-ring 2-231A *2-259A Aux Inlet Flange O-ring 2-234A Outlet Flange O-ring (Qty) 2-231A (2) 2-234A (2) *2-245A 2-231A R Valve Cap O-ring 2-224A 2-224A 2-228A 2-234A Bearing Cap Shim (0.002) (Qty) 4439 (8) 4439 (8) 4439 (8) 4458 (8) Bearing Cap Shim (0.010) (Qty) (2) (2) (2) (2) Bearing Cap Shim (0.020) (Qty) (2) (2) (2) (2) Shaft Key Cam/Liner *4414 *4242 *5539 *4443 Rotor and Shaft 4430X2R *4495X2R *12081X6R *4444X2 *Items not included in Kit Coro-Vane Stationary Pump 521E Repair Kit Part Description 521E Stationary Pump Repair Kit No. 2904X2 Seal Assembly (Qty) 1769XRA (2) Bearings (Qty) 2754X (2) Grease Seals (Qty) 1358 (2) Blades/Vanes (Qty) (10) Sideplates (Qty) (2) Case O-ring (Qty) 2-261A (2) *Items not included in Kit, but may be ordered Part Description 521E Stationary Pump Repair Kit No. 2904X2 Inlet Flange O-ring 2-234A Outlet Flange O-ring 2-234A R Valve Cap O-ring 2-224A RV Adj Screw O-ring 2-112A Cam/Liner* Rotor and Shaft* 11661X1R CORKEN LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 87

93 CORKEN PUMP REPAIR PARTS Pump Parts CORKEN Part Models Standard Optional Material Material Case, Cover Ductile Iron ASTM A536 Impeller Copper Alloy ASTM B584, UNS C92300 Steel and (Also Known as Navy Bronze) Stainless Steel Impeller Key Steel, Zinc Plated Seal Seat All Silicon Carbide Seal Rotor Carbon Seal Metal Parts Stainless Steel Seal Sleeve Aluminum Seal Housing Nickel-Aluminum-Bronze Shaft Steel Stainless Steel Frame FF/FD Gray Iron ASTM A48. Class 30 DLF/DLD DLF/DLD: Ductile Iron ASTM A536 Bearing Cap Ductile Iron ASTM A536 O-rings *Neoprene Buna-N, Viton, All Buna-N, Kalrez Retainer Rings Steel Bearings Ball * Neoprene and Viton are registered trademarks of the DuPont Company. G sales@mtankco.com

94 MOTORS Three Phase Explosion Proof Motors BALDOR G EM7174T HP RPM Volts Frame Full Load Amps Weight EM7018T-1 1-1/ / T EM7042T / T EM7044T / T EM7072T / T EM7047T-1 7-1/ / T EM7170T / T EM7174T / T EM7054T / T EM7056T / T EM7058T / T Single Phase Explosion Proof Motors BALDOR L5018 HP RPM Volts Frame Full Load Amps Weight VL5023A* /230 56C VL5024A * 1-1/ /230 56C 8 76 L5030T 1-1/ / T L / L5028T / T L *C faced motors for Blackmer pumps METERS & REGISTERS Liquid Meters NEPTUNE In/Out Min/Max Temperature Register Size Gal/Min Compensation RL100108A12, 1 3/4 FNPT 3-18 GPM 600 (AAAAD) No RL100118A23 3/4 FNPT 3-18 GPM 600 (AAAAF) RL12521RGD1 1-1/4 FNPT 5-30 GPM RL15021RGD1 1-1/2 FNPT GPM Yes RL20021RGD2 2 FNPT GPM RL2002N21RGD2* 2 FNPT GPM *Ductile iron body, all others are aluminum RL100108A12 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 89

95 METERS & REGISTERS Positive Displacement Meters MA 7 LIQUID CONTROLS MA-7-GY-10 MA-7-GY-10-LCR2 MA-7-GY-10-LCRP MA-7-GY-10-LCR2-EV MA-7-GY-10-LCRPV Description 2 Meter with Mechanical Totalizer/Printer, TVC, 100 Mesh Strainer, L - R 2 Meter with LCR2, ETVC, 100 Mesh Strainer, L - R, ST221 Software Same as Above with Preset 2 Meter with LCR2, ETVC, 100 Mesh Strainer, L - R, ST221 Software, Electronic Vapor Eliminator Same as Above with Preset The MA-7 Positive Displacement Meter is designed for LPG truck and bulk loading applications. Accessories may be rotated 180º or covers swapped to reverse direction of flow. G FEATURES: 100 GPM (380 L/min.) capacity Precision machined parts Class 10 construction Class 12 construction for NH 3 (Anhydrous Ammonia) service is available upon request Offers mounting flexibility Choice of 2 NPT standard, and 1-1/2 optional companion flanges Accessories: Vapor eliminator, strainer (100 or 200 mesh), screen, diaphragm valve Mechanical or electronic registration Optional temperature/volume compensation METER MA-7 Positive Displacement Meters MA 5 and MA4 LIQUID CONTROLS Description MA-5-CX-10 Standard Meter w/air Eliminator, Strainer, Differential Valve, and Counter MA-5-CY-10 Same as MA-5-CX-10 Except: with Temperature Volume Compensator MA-5-GX-10 Same as MA-5-CX-10 Except: with Printer MA-5-GY-10 Same as MA-5-CX-10 Except: with Printer and Temperature Volume Compensator MA-4-CX-10 Standard Meter w/air Eliminator, Strainer Differential Valve and Counter MA-4-CY-10 Same as MA-4-CX-10 Except: with Temperature Volume Compensator MA-4-GX-10 Same as MA-4-CX-10 Except: with Printer MA-4-GY-10 Same as MA-4-CX-10 Except: with Printer and Temperature Volume Compensator The MA-5 Positive Displacement Meter is designed for LPG truck and high speed motor fuel applications. Rate of flow GPM ( L/min.) capacity range The MA-4 Positive Displacement Meter is designed for LPG motor fuel applications. Rate of flow 5-30 GPM ( L/min.) capacity range. MA 5 AND MA4 METERS FEATURES: Carbon insert bearings reduce friction and wear Precision machined parts Low Pressure Loss increases maximum flow rate system No planned obsolescence allows rebuild rather than replace Offers mounting flexibility For operation at any non-shock working pressure up to 350 PSI Choice of 1-1/2 NPT standard, and 2 optional companion flanges Accessories may be rotated 180º Covers may be swapped to reverse direction of flow METER MA-5 (MA-5-CX-10) sales@mtankco.com

96 METERS & REGISTERS LectroCount TM Electronic Meter Liquid Controls LectroCount is an electronic register that replaces the mechanical register, calibration gears and/or adjuster mechanism traditionally used on many flow meters. It is designed to meet, even adapt to, your flow meter and process control instrumentation requirements. FEATURES: G LectroCount Meter Weights and Measures (custody transfer) approved advanced microprocessor based electronic registration, presetting and printing control systems Accepts pulse input from most flow meters Rated NEMA-4 non-incentive Class 1, Division 2, Group C and D RS communications capable Electronic Registers E1000 and E4000 NEPTUNE Neptune s Electronic Registers automate transaction operations for deliveries of LPG, commercially distributed liquids, and distillate fuels through flow meters on bulk delivery trucks. E1000 E1000 FEATURES: Direct retrofit to RL100 Electronic calibration with K factor Displays volume or flow rate in gallons, liters, or barrels Automatic reset Programmable time-out between deliveries Easy to read six digit display with up to three decimal places Two year replaceable 3.6V lithium battery Non-resettable totalizer Operating temperature range -13 to 158 F NEMA 4x enclosure E4000 FEATURES: Compatible with automation technologies Easy to use, menu driven display Start with simple pump and print (imitate your mechanical register) Electronic temperature compensation provides accurate, rapid response Stand-alone pricing (print invoices directly from the truck) Configure register from laptop computer Add data collection devices without the need for additional register hardware Interface with popular industry office software packages E4000 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 91

97 PLANT & VEHICLE REMOTE CONTROLS ProControl 2 Remote Readout BASE ENGINEERING INC. The ProControl 2 Remote Readout is an all-in-one controller that greatly improves delivery efficiency and reduce costly fueling mistakes. Easily retrofitted to existing trucks or installed on new equipment, this patented system is ATEX certified for use throughout the world in hazardous locations. A RFID option is available with the ProControl 2. RFID Option allows customer tank interlock, fleet refueling, ID capture, product manifold interlock and asset tracking. FEATURES: Handheld LCD display shows the exact meter reading to 1/10th of a unit in real time. Direct serial interface with meter register shows a volume identical to the truck mounted register Exact programable delivery amount Kits available for all types of electronic and mechanical registers, including dual metered double pumper trucks Allow simultaneous control of up to eight custom truck operations Hose reel remote control Tank Valves can be opened with automatic delay feature to engage PTO/Cargo Pumps Engine RPM can be remotely controlled to increase or decrease pump volume Emergency Stop feature closes all tank valves and stops truck engine Available with 5-minute Query automatic emergency shut-down feature ProControl 2 Remote Readout with RFID H NOTE: Emergency Stop requires manual system reset at truck. Internal valves and pumps cannot be reactivated with the handheld following e-stop. Pressing the e-stop button repeatedly sends the same shut-down signal. Driver can be safely moving away from the truck and be assured of shut-down. ASKW Series Remote BASE ENGINEERING INC. ASKW Series LPG and Refined Fuels Remote Control Systems offer unrestricted hose end control greatly increasing productivity and improving safety over conventional truck mounted manual controls. ASKW Series are specifically for fuel delivery truck applications requiring explosion proof, severe-service remote controls. The system is available with one to eight control buttons in a rugged, compact package. FEATURES: Receiver units install easily Prewired electrical harness supplied External antenna/coax provides up to 1000 ft (300m) operating range Powerful receiver picks up signal through brick, concrete, and metal walls Receivers are energized only during pumping operations Systems are factory married with unique 32 bit ID codes ensuring the receiver will not work with any other transmitter Internal diagnostic LEDS monitor battery levels, signal connection, and wiring faults for easy troubleshooting Built-in fail-safe feature closes all tank valves with any power loss or truck movement Emergency Stop feature closes all tank valves, and kills the truck engine and pump. The safety latched signal causes the tank valves and pump to remain inoperative until a manual system reset is performed. Pressing the E-Stop button repeatedly will send the same shut-down signal. This system meets International regulatory requirements and is available for all types of pneumatic, cable operated or Flowmatic type tank valves and all truck engines. Emergency Stop ASKW Series sales@mtankco.com

98 PLANT & VEHICLE REMOTE CONTROLS ASKW Series Remote Controls (continued) BASE ENGINEERING INC. The ASKW Series Query Option is required on LPG delivery vehicles in some countries and is available on all ASKW systems. This feature requires the operator to periodically press a QUERY button on the remote control to keep the pumping system active. If the operator fails to press the QUERY button within a factory specified time an audible warning is first sounded followed by activation of the trucks EMERGENCY STOP system. The operator can press the QUERY button at any time during the delivery or audible warning period and reset the timer. H Query Remote Control ASKW Series Engine RPM Remote Control ASKW Series PTO Remote Control ASKW Series The ASKW Series Engine RPM or Throttle Option allows the operator to increase/decrease truck engine RPM and correspond pump volume from the customers tank/hose-end of the delivery. Operator can begin delivery process, ensure product is flowing safely, then increase pump speed until tank is nearly full. Connections are available for any electronic or mechanical engine control system. The PTO(s) or Pump Option for the ASKW Series Remote extends pump life and increases safety by allowing the operator to engage and disengage the PTO and pump from hose end at the storage tank. Truck PTO shaft is not turning, pump is not running in by-pass, and hose is not charged unless connected to the tank. PTO connection can be electric, pneumatic, hot shift or clutch shift. Remote PTO Delay option automatically opens tank internal valve 5 seconds prior to engaging PTO, allowing pump and product lines to equalize pressure. This feature prevents an excess flow slug situation which when happens, starves the pump of product, and may lead to pump failure. The Hose Reel Option for the ASKW Series Remote remotely unwinds and/or rewinds the hose on or off the reel. Easy to install prewired hose reel motor solenoids and 70 amp breaker is included with this option. System design prevents Unwind and Rewind circuits from being energized at the same time. ASKW Series Remote Enable Option can be specified to create a two step process for activating certain buttons to further prevent unintended button operation. The Turn-Key Plug & Play System is available with pre-wired pneumatic solenoids, relays, electric solenoids, and actuators. This system simplifies conversion of existing manual truck controls or up-fit new chassis and tanks. Modular components allow for easy installation and field replacement. Air solenoids are extremely rugged and can be direct mounted to chassis allowing hose-end PTO, tank valve, and cargo pump interlock. Hose Reel Remote Control ASKW Series Enable Remote Control ASKW Series Turn-Key Remote Control ASKW Series LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 93

99 PLANT & VEHICLE REMOTE CONTROLS E-Stop Bulk Plant System BASE ENGINEERING INC. The E-Stop Bulk Plant Wireless Emergency Shutdown System eliminates costly hard wiring of fixed location emergency stop switches. Any number of wireless remote E-Stop switches can be installed within the plant facility and communicate with one receiver/controller unit. These systems will work in conjunction with existing, hard-wired, manual E-Stop switches and plant safety controls. Operator worn E-Stop remotes can also be added to these systems. NOTE: Daily E-Stop transmitter battery tests and scheduled battery replacement interval is strongly recommended. The E-Stop transmitters and receiver/controller shut-down will NOT operate when the remote E-Stop transmitter batteries are exhausted. ASKM100-AC E-Stop Remote has a fixed-frequency switch that operates at 433mHz using two double A batteries. The transmitter is energized only when E-Stop switch is activated. Battery test button shows a low battery flashing LEd on the E-Stop switch as well as on the receiver/ controller unit. FEATURES AND SPECIFICATIONS: Frequency of Operation: mHz Method of Transmission: 56 bit DES encryption key Rugged weatherproof polymer enclosure External rubber flex antenna 1000 ft. (300m) operating range Up to 2 miles high powered signal option Operational in 20º F to 185º F Operates on common AA batteries 300 hours battery life with continuous use Intrinsically safe for use in hazardous environments H DSSF 100-AC System is a direct sequence, spread-spectrum remote E-Stop switch that operates at 2.4GHz using a rechargeable battery pack. The E-Stop switch and receiver/controller unit are connected via SafeLink, a continuous monitoring feature exclusive to BASE Engineering. Any loss of signal connection between the remote E-Stop switch and receiver/controller results in an automatic E-Stop trigger until the signal is restored. High powered E-Stop transmitters have an operating range of up to two miles. Transmitters must be connected to a back-up power supply as the battery pack will operate for only seven days. Back up power can be 12/24VDC, 120/240VAC, and solar powered where practical. FEATURES AND SPECIFICATIONS: Frequency of Operation: 2.4GHz DSS (869.7 and mHz available) Method of Transmission: 56 bit DES encryption key Rugged weatherproof polymer enclosure External rubber flex antenna 1000 ft. (300m) operating range Up to 2 miles high powered signal option Operates on rechargeable lithium ion batteries (included with 12/24VDC charger) Operational in 20º F to 185º F 30 hours battery life with continuous use Modular Din Rail Components sales@mtankco.com

100 PLANT & VEHICLE REMOTE CONTROLS E-Stop Bulk Plant System (continued) BASE ENGINEERING INC. E-Stop Transmitter is a low powered, intrinsically safe device suitable for use in Zone 2, Class 1, Div 2, Group D hazardous environments. Pressing the Emergency Stop button causes the receiver/controller unit to trigger a plant shut-down. The system cannot be rebooted until the E-Stop button is pulled out and a manual receiver/controller reset is performed. E-Stop buttons are dual contact, dual channel, and comply with global E-Stop switch requirements. Systems will fail safe, triggering an automatic E-Stop with any loss of main line electrical power supply to the receiver/controller unit. All systems are CSA, CE, and FCC approved. Standard Wall Mount E-Stop Switch E-Stop Receiver/Controller easily interface with electrical, pneumatic, nitrogen, or mechanical plant shut-off equipment. H NOTE: Standard receiver/controller units are NOT rated explosion proof and are typically installed in non-hazardous electrical control equipment areas. Receiver/controller units are provided with antenna and coax cable for outside antenna mounting providing maximum operating range. Explosion-proof electrical enclosures are available on request. Optional Handheld E-Stop Available for any System FEATURES AND SPECIFICATIONS: Operates with 12/24VDC or 120/240VAC power supplies Receiver/Controller outputs can specified as 12/24VdC, 120/240VAC, dry contact, RS232, or J1939 CAN bus Constructed of IP67 rated, impact resistant polycarbonate External antenna/coax included Pre-wired to meet customer requirements Serial Communication: Optional J1939 CAN bus/rs232 interface to OEM serial networks Electric/pneumatic solenoids are available upon request Wireless Deadman Series Remote Control BASE ENGINEERING INC. The Deadman Series Trigger Switch Remote Control is specifically for industrial applications requiring positive operator-to-machine contact. A wireless trigger-switch is used to send RF command signals to the pump. The operator is unencumbered by cables and wires normally used in deadman fueling operations. The Deadman Series incorporates a secure frequency hopping, spread-spectrum radio link that is virtually immune to outside electrical or RF interference. Operations fail safe (shutdown) with any loss of signal from transmitter. Deadman Transmitters are available with Hose Reel, PTO (pump), Engine RPM (throttle), Emergency Stop, and Enable options. Deadman Trigger Switch Radio Tansmitter TRANSMITTER FEATURES AND SPECIFICATIONS: Frequency of Operation: mHz FHSS (433.92mHz, 869.7mHz and 2.4GHz radios available) Transmitter Power: 100mW Method of Transmission: 56 bit DES encryption key Rugged weatherproof polymer enclosure Internal antenna on card PCB mount Operational in 20º F to 185º F Up to 500 feet operating range (higher power available) Operates on common AA batteries 30 hours battery life with continuous use with audible low battery warning and flashing LED indicator Rechargeable lithium ion cell with 12/24VDC charger Intrinsically safe for hazardous environments LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 95

101 PLANT & VEHICLE REMOTE CONTROLS Wireless Deadman Series Remote Control (continued) BASE ENGINEERING INC. RECEIVER FEATURES AND SPECIFICATIONS: Power supply: 12/24VDC (Optional 120VAC systems available) Current load is up to 4 amps per channel or 10 amps total Constructed of impact resistant polycarbonate, IP67 rated Rugged weatherproof polymer enclosure Internally protected and encased antenna (external antenna/coax available) Pre-wired to OEM requirements, quick connect fittings supplied Up to12 programmable channels Optional CAN bus interface is available Mounted Receiver/Controller Crane and Service Truck Radio Remote Control BASE ENGINEERING INC. Crane and Service Truck Radio Remote Controls greatly increase jobsite safety by providing the operator the safest vantage point for tank delivery. One-man control eliminates a second person instructing the operator where to position the tank. Operator has freedom of movement around entire worksite while setting tank precisely into position. H ASKR Model was developed for Crane and Service truck applications. FHSR Model is designed for crane applications requiring interference-free, fail-safe machine control. Operator handheld and machine mounted transceiver continuously communicates to ensure signal validity and strength. Any loss of signal results in all active functions automatically shutting down and failing safe. The FHSR system incorporates a secure frequency hopping, spread-spectrum radio link that greatly reduces outside electrical or RF interference. ASKR Model DSST Model is designed for proportional hydraulic crane applications requiring up to twelve radio remote control functions. Toggle switch controls with trigger provides variable speed control of hydraulic pump solenoids. Split signal capability allows combined boom movements including up and sideways and extend and winch down. Weatherproof receiver can be crane mounted and interfaces easily to crane electrical system with OEm style plug-in connector. ASKW Model allows up to 8 control functions. Two AA batteries provide 300 hours of continuous use. Parts replacement is simplified with quick connect plugs and simple learn button to link handheld and receiver. Transmitter has low battery warning indicator and button text is printed to customer specifications at time of order. TRANSMITTER FEATURES AND SPECIFICATIONS: Handheld transmitters are available with up to twelve crane control buttons Rechargeable lithium ion cell with 12/24VDC charger Specifications are similar to the Deadman Series Remote Control Transmitter DSST Model RECEIVER FEATURES AND SPECIFICATIONS: Up to twelve pre-programmed high-side outputs available Outputs can be selectively interlocked to other operations for safety reasons Modular components allow for easy installation and field replacement Interface to OEM crane controls can be simplified with factory installed, direct-plug connectors or through J1939 serial communication (other protocols available) Specifications are similar to the Deadman Series Romote Control Receiver ASKW Model sales@mtankco.com

102 PLANT & VEHICLE REMOTE CONTROLS Passive Transport Leak Detection System BASE ENGINEERING INC. Passive Transport Leak Detection Systems are designed for propane, anhydrous ammonia and butane transports. These systems continually monitor the off-loading process looking for a rapid change in discharge pressure. They detect a separated hose or failed connection and close the tank internal valve within half a second. LDS 60 FEATURES AND SPECIFICATIONS: Easy to install No calibration or adjustment Options include multi-pipe or multitrailer sensors, automatic truck engine or PTO shut-down Test button determines a unit s readiness DCE certified to comply with all US DOT and Canadian Transport Canada regulations for Passive Shut Off Power source: 12 volts DC H Model LDS 60 is a fully automatic leak detection system for propane and anhydrous ammonia transports. The low powered intrinsically safe control unit continually monitors piping and hose assemblies during the off-loading process. A failed pipe, or hose separation will cause the tank s internal valve to close instantly and sound an audible air-horn alarm. A simple reset button returns the unit to the monitoring state. LDS 100 LDS 200AQRF Model LDS 100 is an automatic leak detection and shut down system designed specifically for LPG and Anhydrous Ammonia bulk transfer. Intrinsically safe unit continually monitors the off-loading process for rate of change parameters signifying broken or damaged hoses, fittings and piping. A leak is instantly detected and stopped by the closure of the tank internal valve(s). The truck s engine can also be stopped and PTO disengaged if desired. This system automatically activates at the end of each load. This ensures that the system is fully operational and helps reduce the possibility of a damaged cargo pump due to product run out. This unit also fails safe and closes the internal valve with a loss of power or the release of the trailer parking brakes. Model LDS 200AQRF is designed to comply with DOT requirements for transports with both metered and bulk discharge capability. Combines all of the features described above for the LDS100 but includes a handheld with remote control Query and Emergency Stop buttons. An audible alarm sounds every 4:30 seconds giving the operator 30 seconds to respond by pushing the Query button. Failure to push the Query button results in automatic activation of the passive shut-down system. Pushing the Query button refills the timer to allow 5 more minutes of offloading. Additionally, the remote E-Stop button gives the operator the ability to activate the passive shut down at any time during the offloading process. Driver Authorization System BASE ENGINEERING INC. Driver Authorization Systems are designed specifically for commercial vehicles and machinery. The system protects the vehicle from unauthorized engine start or movement depending on the customer s application. FEATURES: Keypad unit with hidden enclosure screws Sealed parking brake low pressure switch with DOT quick connect T fitting Sealed engine kill relay sensors, automatic truck engine or PTO shut-down Air line fittings supplied Components are pre-wired with quick connect electrical. Trucks with existing parking brake air pressure switches and engine kill relays, (radio shut down systems) may be able to use some of these components. Contact BASE Engineering at to confirm. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 97

103 PLANT & VEHICLE REMOTE CONTROLS Driver Authorization System (continued) BASE ENGINEERING INC. Model DAS1000IGN prevents unauthorized engine start. System is armed automatically each time the key is turned off. Entry of correct user code disarms system and allows engine to be started. Used on all types of vehicles and equipment. Model DAS1000AT prevents unauthorized vehicle movement on vehicles with automatic transmissions. System arms automatically when shifting transmission into park. Shifting the vehicle into drive without entering a valid user ID causes engine to stall. Entry of correct code disarms system and allows engine start. Well suited for any vehicle that needs to be left unattended with engine running. Model DAS1000AB operates the same as Model DAS1000AT with the addition of being armed with the application of the truck s parking brake. This system requires the vehicle to be equipped with air brakes. Releasing the parking brake without entering a valid ID code will cause the engine to stall. Entering a valid ID code disarms the system and allows engine start. Well suited for large trucks with air brakes and engines that need to be left running while the vehicle is unattended. Model DAS1000ABT is similar to Model DAS1000AB, but designed for tractor trailer units with a dedicated trailer parking brake. System is armed with application of tractor or trailer parking brake. Prevents deliberate bypass of authorization system by drivers using trailer brakes verses tractor brakes to park vehicle (see above). Attempting to bypass, disable, or damage any BASE Driver Authorization System will cause the ignition to lock out until repairs are made and a valid code entered. H Auxiliary Fuse Panel BASE ENGINEERING INC. Auxiliary Fuse Panels are designed for new or existing truck chassis requiring additional fused connections. Ideal for adding radio controls, work lights, GPS systems, electronic meters to truck electrical system. FEATURES AND SPECIFICATIONS: Adds (6) additional 10 amp fuse connections under dash or on firewall IP67 rated enclosure is sealed against weather and pressure washers Includes: - built-in isolation relays for keyed and fused power supply - battery connection cables and wire harness for six fused input/outputs - all required wire connections sales@mtankco.com

104 REELS Pump Hose Reel Parts Anatomy List BLACKMER HANNAY COMPONENTS 1 Bearings - Weight of spool and hose is supported by bearings. 1a Back Bearing 1b Front Bearing 2 Disc - Rolled edges prevent hose damage and add rigidity to disc. Additional strength is provided by a concentric rib. H 3 Drum - Roll formed steel with full-length weld. 4 Tie Rods - Join discs and drum to form spool. Reinforced with pipe spacers for rigidity and strength. 5 Chain and Sprocket Drive - Provides smooth positive rewinding on powered reels. This cutaway illustration shows a typical power rewind reel with an optional auxiliary crank rewind mechanism. All Hannay reels are assembled from combinations of the basic components shown here. Since components are taken from a large inventory, each reel is assembled to the buyer s particular requirements. This cutaway illustration shows a typical power rewind reel with an optional auxiliary crank rewind mechanism. All Hannay reels are assembled from combinations of the basic components shown here. Since components are taken from a large inventory, each reel is assembled to the buyer s particular requirements. CONSTRUCTION Frames, discs, and drum are fabricated of heavy-gauge steel. Bearings are self-aligning. Malleable iron and steel are used for hose reel hub assembly, outlet riser, and swivel joints. Stainless steel, aluminum, and special swivel joint packing can be supplied to meet special requirements. FINISH Standard finish is oven-cured enamel. Finishes other than standard, such as special primers, may be specified at extra cost. TEMPERATURES AND PRESSURES Standard reel construction will handle most liquids or gases at temperatures ranging from -20 to +400 F (-29 to +204 C). Operating pressures available up to 10,000 PSI (690 bar) depending on the specific reel series. These operating pressures and temperatures are shown on descriptive pages in each product catalog. Reels to operate at pressures and temperatures other than standard are available at extra cost. SHIPPING Reels are shipped completely assembled, ready to install. Installation instructions are supplied with each reel. 6 Rewind Motor - Electric rewind motor is shown. Compressed air or hydraulic motors can be used. 6a Electric Junction Box 7 Hub assembly - Includes the fluid hub, the outlet riser, and the reel axle. Fluid passes from the swivel joint inlet through the hub assembly, to the hose. 7a Outlet riser - Contoured to match the curve of the reel drum so hose will wrap smoothly. 7b Fluid hub 8 Swivel joint inlet - Permits reel to rotate freely while connected to the fluid source. Joint is not used as a bearing. Straight or 90 swivel joints are available for most models. (Flexible connector must be used between swivel joint and inlet piping or warranty will be void.) 9 Brake/rewind assembly - Bevel gear rewind has an adjustable tension brake. Rewind and braking devices vary with different models. 10 Front Frame 11 Back Frame 12 Front Foot 13 Back Foot LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 99

105 REELS Pump Guidemaster Parts List Parts List (model GM-700) BLACKMER HANNAY H ORDERING INFORMATION Be sure to specify complete model number, serial number of reel, and part number. Ref Part Parts Per Part Name No. No. Pump Roller Body Casting w/mounting Bolts* Guide Arm Casting* Mounting Yoke with Bronze Bushings Switch Mounting Bracket* EPS-1 Explosion-Proof Switch Guidemaster Pinlock Assembly, S/S* SST Pivot Pin (with 1/4 Cap Screw and 1 Lock Washer) GM-609 Roller (with 2 Pressed-in Ball Bearings) GM-608 Ball Bearing Guidemaster Bottom Roller Plate* /2 Lock Washer /2-13 Hex Nut 2 Ref Part Parts Per Part Name No. No. Pump /4-20 x 3/4 Socket Head Cap Screw /16-24 x 2-1/2 Plated Bolt with Nut /16-24 Hex Nut Oil-impregnated Bronze Bushing for Yoke /4-20 x 3/4 SST Socket Head 4 Cap Screw /2 Flat Washer Roller Mounting Bolt (Threaded)* /4-20 x 5/8 SST Socket Head Cap 2 Screw and Lock Washer /4-20 X 5/16 Set Screw /8 Flat Washer /8-16 x 3/4 Button Socket Head /8-16 Hex Acorn Nut 4 sales@mtankco.com

106 REELS Positive Reel Series Displacement PB/DPB Meters MA 5 and LIQUID CONTROLS HANNAY PB Series Description Manual or Power Rewind, 1 to 1-1/2 I.D. Hose, Standard Pressures to 350 PSI (24 Bar) Series PB are explosion-proof reels that are used individually or in pairs for liquid and vapor return hoses. These reels are available in a gear-driven crank rewind, #40 chain and sprocket drive powered by an electric, hydraulic or compressed air motor, or direct drive hydraulic rewind motor. Crank rewind and direct drive reels are supplied with pinion brakes. Power rewind reels (chain and sprocket driven) are supplied with a strap brake. Other sizes and/or threads can be furnished and must be specified when ordering as well as the roller position. FEATURES: H Series PB Electric Rewind 90 ball bearing swivel joint inlet with 1-1/2 female NPT threads Handles pressures to 350 PSI (24 bar) Performs in temperatures -40 F to +350 F Steel inlet, outlet riser, and hub assembly Standard outlet is a flanged riser with 1 female NPT threads Accessory items include rollers and roller mounting brackets Alternate brake and locking devices available Reel Series PBGMT with Bottom-Mounted Guidemaster HANNAY PBGMB Description Handles 1 to 1-1/2 I.D. Hose, Standard Pressures to 350 PSI (24 Bar) Series PBGMT with Bottom-Mounted Guidemaster are ideal for open-deck or compartment mounting. Reels are available with #40 chain and sprocket drive powered by an electric, hydraulic or compressed air motor, or direct drive hydraulic rewind motor. Direct drive hydraulic rewind reels are supplied with pinion brakes. Electric powered rewind reels are supplied with a strap brake. Other sizes and/or threads can be furnished and must be specified when ordering as well as the roller position. Series PBGMB Electric Rewind FEATURES: 90 ball bearing swivel joint inlet with 1-1/2 female NPT threads Standard outlet is a flanged riser with 1 female NPT threads Performs in temperatures -40 F to +350 F Alternate brake and locking devices available Top-mounted guidemaster available Spring Rewind Reel Series PB800 HANNAY PB800 Description Handles 3/4 or 1 I.D. Hose, Standard Pressures to 2000 PSI, Available Up to 6000 PSI Series PB800 FEATURES: Non sparking ratchet locks reel Declutching arbor prevents rewind damage Available with channel frames for heavy-duty applications 90 ball bearing swivel joint inlet with 1-1/2 female NPT threads Performs in temperatures from -40 F to +350 F Standard outlet is a flanged riser with 1 female NPT threads Narrow version available upon request LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 101

107 REELS Hose Reel Control Switch Covers Material Description MEP-GMC1 Black EPDM Hose Reel Control Switch Cover for Guidemaster Control Arm MEP-RDC1 Black EPDM Hose Reel Control Switch Cover for Red DOT EPS Hose Reel Control Switch Covers are intended to protect Hannay Hose Reel Control Switches from moisture and/or other contaminants during over-the-road transit. The MEP-GMC1 is specifically designed to fit Hannay Guidemaster control switches while the MEP-RDC1 fits Hannay red DOT EPS style control switches. MEP-GMC1 FEATURES: Made with durable UV stable black low temperature EPDM material Includes security lanyard to help prevent loss of the cap Control switch can be operated through cover without removing MEP-RDC1 HOSES & ACCESSORIES H 1 Bobtail Hose PARKER Length Description 7132LAR16MP Parker 7132LAR16MP Parker 7132LAR16MP Parker 7132XTCLAR16MP Parker Flex Low Temp 7132XTCLAR16MP Parker Flex Low Temp 1 Bobtail Delivery Hose, Factory Crimped Ends, Tested and Certified Series 7132 Propane Hose PARKER Hose I.D. Hose O.D. # of Braids Ft/Reel * / / / / / / / * Estimated - some reels may be different lengths. Parker LP Gas Hose 7132 Series is heavy duty, flexible, and designed for liquid or vapor transfer. The 7132 Series has a black neoprene cover, continuous labeling, and has a maximum recommended working pressure of 350 PSIG. UL Listed Hose is available in cut lengths by the foot, or in reel lengths. Order by inside diameter. Series 7232 sales@mtankco.com

108 HOSES & ACCESSORIES Crimped On Hose Ends Crimped On Hose End Hose Size Hose End PARKER MP04TY 1/4 I.D. 1/4 MNPT FJ04TY 1/4 I.D. 1/4 Female Flare S101HY-6-6 3/8 I.D. 3/8 MNPT S108HY-6-6 3/8 I.D. 3/8 Female Flare MP08TY 1/2 I.D. 1/2 MPT FJ08TY 1/2 I.D. 1/2 Female Flare S101HY /4 I.D. 3/4 MNPT MP16LAR 1 I.D. 1 MNPT S101HY /4 I.D. 1-1/4 MNPT S /2 I.D. 1-1/2 MNPT NP32LA 2 I.D. 2 MNPT H Clamp Style Hose Couplings ME B ME S Hose Barb Outlet MNPT ME /2 1/2 ME /4 3/4 ME S 3/4 1-3/4 F. Acme Steel ME /4 1 ME ME S 1 1-3/4 F. Acme Steel ME /4 ME /4 1 ME /4 1-1/4 ME S 1-1/4 1-3/4 F. Acme Steel ME S 1-1/4 2-1/4 F. Acme Steel ME /2 1-1/2 ME S 1-1/2 1-1/2 F. Acme Steel ME ME B* 2 3-1/4 F. Acme Brass ME S 2 3-1/4 F. Acme Steel * Rated for LP-Gas Marshall s Clamp Style Hose Couplings are user friendly and easy to install in the field. A steel or ductile hose barb is inserted into the hose and two outer clamps, positioned on the outside of the hose, have a boss to keep the bolts from rotating while the clamps compress the hose for a leak free seal. NOTE: Clamps must be installed with clamp lip fully engaged into flange groove on hose barb body. ME FEATURES: Hose barbs are constructed of zinc plated steel or ductile iron with automotive grade powder coat finish Hose clamps are ductile iron with automotive grade powder coat finish Optional integrated female Acme swivel eliminates weight of additional couplings Includes hose barb, two clamps, nuts and bolts LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 103

109 FLEX CONNECTORS Stainless Steel Flex Connectors Pipe Size Overall Length No. of Steel Braids /2 MNPT /4 MNPT 16 Single MNPT /4 MNPT /2 MNPT Double MNPT MNPT 22 NOTE: Never use a flexline to correct bad plumbing. Flexline must be kept straight. Do not use on mobile installations - use high pressure Parker rubber hose, with pressed on ends, certified. FEATURES: Braided stainless steel for liquid propane service 350 PSI rated Prevents piping damage from vibration and thermal expansion Schedule 80 ends Custom made flexlines to your specifications The length shown in the chart is the minimum. Maximum length is 36. H Parker Rubber Flex Connectors PARKER Hose Size Coupling Length Min. Overall Length 1/2 ID 2-7/8 3/4 ID ID 3-1/ /4 ID 4 1-1/2 ID ID 5-1/2 Parker s Rubber Flex Connectors are custom made and certified rubber flex connectors. Maximum length available is 36. sales@mtankco.com

110 HOSE END VALVES & ADAPTERS High Flow Low Emission Hose End Valves ME800 Inlet Outlet Handle Handle Factory Installed Extended Accessory (FNPT) (F. Acme) Style Material E-Z Turn Swivel Version Holster ME800 Aluminum No ME800WS Aluminum Yes Standard ME800C Composite No ME800CWS Composite Yes ME800G Aluminum No 1 1-3/4 ME800GWS Aluminum Yes Fluted ME800GC Composite No ME800GCWS Composite Yes ME800EXT Aluminum No Standard ME800EXTWS Aluminum Yes No Yes MEP801 No H ME800G Marshall s High Flow Low Emission Hose End Valves are leading the industry in minimal product loss during disconnect without sacrificing flow. They have instant full-on flow with the added protection of a quick closing, self-locking handle to prevent accidental opening of the valve during transport. They are designed to be used at the end of a filling hose on a bobtail, dispensing system or nurse tank. ME800EXTWS ME800GWS High Flow Model FEATURES: All stainless steel component construction Molded and riveted on valve main seal Vents less than.50 cc for minimal loss of product at disconnect Self-locking toggle handle prevents accidental valve opening Toggle handle and stem assembly rotate 360 Durable ductile iron valve body with automotive grade powder coat finish Stainless steel 1-3/4 female Acme insert cast into the handle No additional adapters or connectors needed for operation Optional extended version offers 6 of additional reach for filling underground containers or other hard to reach applications Optional composite style offers a durable lightweight handle that is resistant to frosting and cold transfer during the filling operation Optional factory installed EZTurn stainless steel swivel Hose End Valve Lock Accessories Fits 2-1/2 Deep Shackle Padlock Keyed Alike Keyed Different ME540 ME800, ME810, ME820 Series ME540P-KA ME540P-KD Hose End Valve Locks are designed to prevent valve operation while in place, eliminating the possibility of accidental discharge and/or theft of product. Simply slide the lock over the handle/bonnet of the hose end or quick acting dispensing valve. For maximum security a common padlock can be installed. ME540 FEATURES: 3/8 diameter through holes for standard 2-1/2 shackle style padlock All stainless steel construction LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 105

111 HOSE END VALVES & ADAPTERS Hose End Valve Holster Description Fits Accessories MEP801 MEP802 Bobtail Hose End Valve Holster-Aluminum Bobtail Hose End Valve Holster-Aluminum w/all Weather Hood ME800 Series ME800 Series MEP801H (Urethane Weather Hood) MEP (Urethane Holster Strap) The Hose End Valve Holster is designed to provide a durable and convenient receptacle to store bobtail hose end delivery valves during over-the-road transit. This holster can be mounted fully above deck or partially below deck in left or right hand hose reel applications with an ergonomic angle providing optimum conditions for delivery personnel. FEATURES: All aluminum and stainless steel construction Urethane anti-vibration valve sleeve to prevent incidental damage to delivery valve Machined adjustment ribs for easy, secure height adjustment Deck backing plate and all mounting hardware supplied MEP801 H MEP801H Hose End Swivel Connectors Inlet (FNPT) Outlet (MNPT) ME850SS-6 3/4 3/4 ME850SS-6/8 3/4 1 ME850SS ME850SS-8/6 1 3/4 The Hose End Swivel Connector allows the hose end valve to rotate 360 creating an easier connection to the tank filler valve while under pressure. It also promotes hose life by preventing twisting and kinking during reeling and unreeling from hose reel. FEATURES: All stainless steel construction for maximum durability and corrosion resistance Large bearing surface for increased strength and durability 360 rotation under maximum working pressure of 400 PSIG UL Listed seal pack design allows for long life with no maintenance required ME850SS Series sales@mtankco.com

112 HOSE END VALVES & ADAPTERS Hose End Fill Check Adapters H Filler Valve Hose End F. Acme M. Acme Connection Connection Handle Handle Swivels Factory Extended Additional Style Material Vent Valve Installed Version Keys ME570 No No No ME571 Yes* No No ME571H Standard Brass Yes* No No ME572 Yes No No ME572EXT Yes No Yes ME572EXTHD 1-3/4 1-3/4 Heavy Duty Cast Aluminum Yes No Yes ME574 Standard Brass Yes Yes No ME574EXT Standard Brass Yes Yes Yes ME574EXTHD Heavy Duty Cast Aluminum Yes Yes Yes ME578 Standard Brass Yes No No ME ME578C Heavy Duty Brass Yes No No ME * ME571 and ME571H allows the hose end valve to swivel while connected to the filler hose end adapter ME570 Hose End Fill Check Adapters are intended to be attached to the LP-Gas delivery truck hose outlets. They feature minimal flow restriction which allows for fast delivery while providing an integral check valve to prevent further product loss if the tank fill valve fails to close. In the event the tank fill valve should fail, leave the fill adapter connected to the fill valve and disconnect the filler hose end valve. Then place the filler valve cap onto the fill adapter. The tank fill valve should be repaired immediately. To increase flow up to 30 percent over standard hose end filler adapters use the ME578 hose end fill adapter. It is a full-flow, manually operated hose end fill adapter where the user controls whether the valve is open or closed, providing maximum protection against product discharge. ME571 ME572 ME571H FEATURES: Integral breakaway feature in the event of truck roll away leaving check intact on tank ME570, ME572, ME574, ME578 shortest overall height in the industry allowing adapters to fit inside tank hood ME571 has a floating internal seat design which allows check to swivel freely when installed on hose end valve ME571H has same features as standard ME571 but with 30% MORE FLOW ME578 has a full-port design which allows for full flow - Removable shutoff key and key ring supplied Extended versions provide an additional 7 for use on underground tanks - Prevents pinching or cutting of the delivery hose on the protective tank collar - Eliminates dangerous extensions that do not incorporate the appropriate fill check device - Eliminates unsafe stacking of multiple fill check adapters to obtain the desirable fill connection height - Overall length allows adapter to fit inside protective tank collar - Optional heavy duty aluminum handle with a stainless steel 1-3/4 female Acme insert cast into the handle ME574 ME578 ME574EXT ME572EXTHD LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 107

113 HOSE END VALVES & ADAPTERS Filler and Unloading Valves, Adapters, & Accessories SHERWOOD LPG PRODUCTS LV440L LV440 LV440AL LV440A LV440BL LV440B LV440CL LV440C Inlet Outlet Bonnet & Stem Bonnet & Stem Lock (FNPT) (F. Acme) Assembly with Lock Assembly with Lock 1/4 1/4 Yes No L-KIT KIT 3/8 3/8 Yes No L-KIT KIT 1/2 1/2 Yes No L-KIT KIT 1/2 1/2 Yes No L-KIT KIT LV440 No Locking Handle LV440 AND LV440L SERIES FEATURES: Connects to end of hose used to fill cylinders Quickly turns on or shuts off the flow of liquid to the cylinder Available with or without a locking device (locking handle on LV440L Series only) Replaceable bonnet and stem assembly; refer to Sherwood Instruction Sheets R-440 and R-440L LV440L With Locking Handle H Hose End Adapters PA901 Series SHERWOOD LPG PRODUCTS Inlet Outlet Description PA901B 1-3/4 ACME (Male) Filler Hose Adapter with Check Valve 1-3/4 ACME (Female) PA901H POL (CGA510 Female) LPG Motor Fuel Fill Adapter The PA901B Hose End Adapter can be attached to the filler hose end valve nozzle or can be used separately as a temporary check valve for the container filler valve in case of a leak. Its short height allows the protective hood to be closed when the adapter is left on the filler valve. PA901B The PA901H adapts a standard POL fitting connection to fill an engine fuel tank, connecting a male POL (CGA510) to a male ACME filler valve. Unloading Adapter PV903A SHERWOOD LPG PRODUCTS Inlet Outlet Description PV903A 1-3/4 ACME (Female) 1/2 FNPT Permits Close Control of the Liquid Flow The PV903A Unloading Adapter is to be used when liquid has to be removed from the tank during an emergency or when relocation is necessary. Its smaller projection provides an easier connection. PV903A sales@mtankco.com

114 CHOCK BLOCKS Smart Interlock Technology Temp. Range Description Accessories ME200PIB -20 to +160 F Sensor Bracket Assembly for ME200 Wheel Chocks ME200EX* ME200PIBK -20 to +160 F Sensor Bracket Assembly w/me200 Wheel Chocks * (Standoff Extension Kit) ME200PIBK Wheel Chock Height Length Width ME H Marshall Excelsior s Wheel Chocks are designed with a Double Grip handle for easy carrying and dual traction grips for the road and tire. The aluminum material makes the wheel chock lightweight and able to withstand the toughest environments. Turn the wheel chock upside down and the points on top of the wheel chock will dig into the snow, ice and mud to prevent sliding. Durable safety yellow powder coat finish. ME200 Wheel Chock Bracket Wheel Accessory Height Length Depth Chocks Standoff Included Extension Kit ME200B 7-3/ No ME200EXT ME200BK 9-3/ Yes ME200EXT ME200BK Wheel Chock Brackets are designed to provide a durable and convenient receptacle to store wheel chocks during over-the-road transit. Durable aluminum construction and molded inserts prevent damage to wheel chocks. For installations that require additional mounting clearance a standoff extension kit is available. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 109

115 ACME ADAPTERS Acme Adapters No Screen Brass Installed Screen Steel* M. Acme FNPT MNPT ME498-4/2 1/4 1/2 ** ME498-6/3 3/8 3/4 ** 1-1/4 ME192 1/2 ME193 3/4 ME210 1/4 ME211 3/8 ME /4 1/2 ME213 ME213S 3/4 ME214 ME214S 1 ME502-12/ /2 ** ME502-16/10 ME502S-16/10 2-1/4 1-1/4 2 ** ME502-16/12 1-1/2 2 ** ME250 ME250A 1-1/4 ME251 ME251A 1-1/2 3-1/4 ME ME252A-16 ME252S-16 2 ME ME508A-24 ME508S-24 3 * Rated for LP-Gas and NH 3 ** Male thread outside and female thread inside ME192 ME212 H ME503J-16 ME503JB-16 ME503JS-16 ME252S-16 Acme Adapters Brass Steel* Factory Factory Factory Factory Factory Factory Installed Machined Installed M. Acme FNPT/ Machined Installed Installed Brass Stainless Steel 1/4 FNPT Stainless Steel MNPT 1/4 FNPT Brass Vent Valve Vent Valve with Vent Hole Vent Valve with Vent Hole Vent Valve ME252J-16 ME252JB-16 ME252JS-16 ME252SJ-16 ME252SJB-16 ME252SJS /4 2 FNPT ME503J-16 ME503JB-16 ME503JS-16 ME503SJ-16 ME503SJB-16 ME503SJS /4 2 MNPT * Rated for LP-Gas and NH 3 To add a factory installed screen use an A after the prefix number i.e. ME252AJB-16 sales@mtankco.com

116 ACME ADAPTERS Acme Adapters H ME215S No Screen Brass Installed Screen Steel* M. Acme FNPT MNPT ME498-4/2 1/4 1/4 ** ME498-6/3 1-1/4 3/4 3/8 ** ME520S-8 1 ME521S-4 1/2 ME215 ME215S 3/4 1-3/4 ME216 ME216S 1 ME217 ME217A ME217S 1-1/4 ME233 ME233S 2-1/4 1-1/4 ME502-12/8 2-1/4 1-1/2 1 ** ME502-16/10 ME502S-16/10 2-1/ /4 ** ME502-16/12 2-1/ /2 ** ME ME503A-16 ME503S-16 2 ME ME503A /4 2-1/2 ME262 ME262A ME262S 3 * Rated for LP-Gas and NH 3 ** Male thread outside and female thread inside ME ME209 Acme Adapters Acme Adapter with Screen Brass Steel * M Acme M Acme Brass Steel * M Acme M Acme ME209 ME209S 1-3/4 3/8-16 ME /4 1-1/4 *Rated for LP-Gas and NH ME273 ME273S 1-3/4 1-3/4 3 ME275 ME275S 2-1/4 2-1/4 The ME209 Series is designed to hold the ME277 ME277S 3-1/4 3-1/4 hose end valve secure when it is not in use. *Rated for LP-Gas and NH 3 MEP503 MEP503K Description Conical Filter Screen Only for 3-1/4 M Acme Adapters 30 Mesh - Stainless Steel Conical Filter Screen and Retainer for 3-1/4 M Acme Adapters 30 Mesh - Stainless Steel ME503 ME503K LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 111

117 FILLER & VAPOR COUPLINGS Filler & Vapor Couplings Service Type Brass Brass Wing Steel* Knurled Wing Nut/Steel Knurled Wing Extended Handle Nut Nut Nipple Nut Nut Standard Fluted F. Acme MNPT ME /4 3/8 ME /4 1/2 ME110 ME110C ME635-4 ME635G-4 1-3/4 1/2 ME111 ME111C ME111S ME111SC ME635-6 ME635G-6 1-3/4 3/4 ME113SC 1-3/4 3/4 FNPT Liquid Vapor ME112 ME112C ME112S ME112SC ME635-8 ME635G-8 1-3/4 1 ME ME635G /4 1-1/4 ME120** ME120S** ME121S** 2-1/4 1-1/4 ME120WR ME120SWR ME121SWR ME130B** ME130** ME130S** ME130BWR ME130A*** ME130SWR 3-1/4 2 ME130WR ME /4 3/8 ME141 ME141S 1-1/4 1/2 ME646-4 ME646G-4 1-3/4 1/2 ME150 ME150C ME150S ME150SC ME646-6 ME646G-6 1-3/4 3/4 ME151 ME151C ME151S ME151SC ME646-8 ME646G-8 1-3/4 1 ME ME646G /4 1-1/4 ME160 ME160S 2-1/4 1-1/4 *Rated for LP-Gas and NH 3 **Does not include a factory installed retaining ring *** Includes factory installed filter screen H Filler and Vapor Couplings are used as connections between the hose and transfer valve. The filler coupling is designed to provide different connections for the end of a hose (inlet) or an angle, globe or quick acting valve (outlet) when transferring liquid. The vapor coupling is designed to be used with valves having an upper check mechanism. The nose piece on the vapor coupling opens the check valve allowing vapor equalization. The extended style has a stainless steel female Acme nut insert cast into the heavy duty aluminum handle. All filler and vapor couplings come with a factory installed retaining ring unless noted. The retaining ring limits the travel of the handle or nut during disconnect reducing spin-offs and promoting proper venting of the captured product. ME110 ME150 ME130S ME130A ME635 Series ME635G Series sales@mtankco.com

118 ACME CAPS, PLUGS, & CHAINS Acme Caps Brass Steel* Cap Cap with Cap with Cap Cap with Cap with Only Chain Cable Only Chain Cable F. Acme Style Chain Only** Accessory ME229 ME229-1 ME229S ME229S-1 1-3/4 Pin Hole MEP148 ME229F ME229F-1 ME229F-1C ME229FS ME229FS-1 ME229FS-1C 1-3/4 Knob MEP167 MEP168 ME431F ME431F-1 ME431FS ME431FS-1 2-1/4 Knob MEP167 MEP168 ME431R ME431R-1 2-1/4 Tapped Hole MEP167 MEP168 ME441F ME441F-1 ME441F-1C ME441FS ME441FS-1 ME441FS-1C 3-1/4 Knob MEP167 MEP168 ME441R ME441R-1 ME441RS ME441RS-1 3-1/4 Tapped Hole MEP167 MEP168 *Rated for LP-Gas and NH 3 **MEP147 ring fits over 3/4 MNPT; MEP148 ring fits over 1-1/4 MNPT NOTE: Red and yellow versions available. Cable Only H Pin Hole Tapped Hole Knob ME229 ME441RS ME441F-1 Chain Included ME229-EL 1-3/4 F. Acme x 1/2 Male Flare 90 ME441FS-1C Cable Included ME106 Accessory Plastic F. Acme Style Chain Cap Only Cap with Chain Only** ME108 ME /4 Pin Hole MEP147 ME109 or ME109-1 or 1-3/4 Pin Hole MEP148 ME109-NH3* ME109-NH3-1* ME106 ME /4 Pin Hole MEP183 *Rated for NH 3 ** MEP147 ring fits over 3/4 MNPT; MEP148 ring fits over 1-1/4 MNPT ME109-NH3 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 113

119 ACME CAPS, PLUGS, & CHAINS Acme Caps with Flange Cap with Flange Accessory Brass Steel* Flange Cap with Cap with Cap with Cap with F. Acme Style Chain Cable Cap Diameter Flange Flange Flange Flange Only Only Only and Chain and Cable and Chain and Cable ME229F5 ME229F5-1 ME229F5-1C ME229FS5 ME229FS5-1 ME229FS5-1C 1-3/4 Knob 5 MEP167 MEP168 ME441F8 ME441F8-1 ME441F8-1C ME441FS8 ME441FS8-1 ME441FS8-1C 3-1/4 Knob 8 MEP167 MEP168 ME441RS ME441R /4 Tapped Hole 8 MEP167 MEP168 *Rated for LP-Gas and NH 3 The Flange allows for easy operation of pneumatic or proximity interlock switches which control the safety systems of transport vehicles. The stainless steel flange is flush mounted to the Acme cap. Flange H ME441F8 DISPENSER VALVES & ADAPTERS Quick Acting Dispensing Valves - Series ME810 Angle Globe ME810-4 ME /2 1 ME810-6 ME /4 1 ME810-8 ME *Rated for LP-Gas and NH 3 Accessories Inlet and No. of MNPT x 1-3/4 F. Acme Adapter Outlet Side Ports Short Short Extended Brass Steel* Steel* ME110 ME635-4 ME110C ME635G-4 ME111 ME111S ME635-6 ME111C ME111SC ME635G-6 ME112 ME112S ME635-8 ME112C ME112SC ME635G-8 ME810 Series Dispensing valves are designed to be used at the end of a filling hose for bobtail, dispensing system or nurse tank filling operations. These valves have instant full-on flow with the added protection of a quick closing, self-locking handle to prevent accidental opening of the valve during transport. LV440 AND LV440L SERIES FEATURES: All stainless steel internal components Self-locking toggle handle prevents accidental operation Durable ductile iron valve body with automotive grade powder coat finish Toggle handle and stem assembly rotate 360 Stainless steel factory installed vent valve ME820 Series sales@mtankco.com

120 DISPENSER VALVES & ADAPTERS Quick Acting Dispensing Valves - Series ME820 Angle Globe ME810-4 ME /2 1 ME810-6 ME /4 1 ME810-8 ME *Rated for LP-Gas and NH 3 Accessories Inlet and No. of MNPT x 1-3/4 F. Acme Adapter Outlet Side Ports Short Short Extended Brass Steel* Steel* ME110 ME635-4 ME110C ME635G-4 ME111 ME111S ME635-6 ME111C ME111SC ME635G-6 ME112 ME112S ME635-8 ME112C ME112SC ME635G-8 H ME821 Series Dispensing valves are designed to be used at the end of a filling hose for bobtail, dispensing system or nurse tank filling operations. These valves have instant full-on flow with the added protection of a quick closing, self-locking handle to prevent accidental opening of the valve during transport. FEATURES: All stainless steel internal components Self-locking toggle handle prevents accidental operation Durable ductile iron valve body with automotive grade powder coat finish Toggle handle and stem assembly rotate 360 Stainless steel factory installed vent valve Engine Fuel Filler Valves & Connectors ME220FSN Moto-Seal Part No. Inlet Outlet Application Protective Brass Cap ME220F ME220FSN 1-1/4 Female Acme 1/4 FNPT Fuel Line ME220M 3/8 FNPT 1-1/4 Female Acme Service Valve ME220FP ME790 ME790SN 1-1/4 Female Acme 1/4 MNPT Filler Valve ME220FSN FEATURES: Knurled body on the fuel line connector and filler valve allows for an easy hand tight connection even under tank pressure Works in conjunction with all mating forklift connectors and filler valves ME220F series has a durable riveted valve stem, chrome plated body and wrench flats for easy installation ME220M has two seals an O-ring to minimize product loss during connection and a gasket to seal the two connectors during filling operations Moto-Seal connector and filler offers - Replaceable tip for maximum service life - Positive seal every time with less than.3 CC product loss at disconnect - 3 layers of security against possible leaks or connection failures when the O-ring and flat gasket are intact on the male connector ME220M ME790SN LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 115

121 DISPENSER VALVES & ADAPTERS Vapor Service Engine Fuel Valves & Connectors Moto-Seal Protective Inlet Outlet Application Part No. Brass Cap ME220FL ME220FLSN 1-1/4 Female Left Hand Acme 1/4 FNPT Fuel Line ME220ML 3/8 FNPT 1-1/4 Female Left Hand Acme Service Valve ME220FLP ME790L ME790LSN 1-1/4 Female Left Hand Acme 1/4 MNPT Filler Valve The CGA 789 Quick Closing Couplings are designed for use with vapor service motor fuel applications. Incorporates all the same features as the standard and Moto-Seal motor fuel filler valves and connectors. The left hand Acme thread allows service on outdoor motor fuel propane equipment including lawn mowers, etc. ME220ML H Moto-Seal Replaceable Tip (ME ) ME790LSN ME220FLSN Quick Acting Toggle Valves Non-Locking Locking Factory Inlet Outlet Installed Vent Valve ME791C ME792C 1/2 FNPT 1/4 FNPT No ME791CJ ME792CJ 1/2 FNPT 1/4 FNPT Yes ME791D ME792D 1/2 FNPT 1/2 FNPT No MD791DJ ME792DJ 1/2 FNPT 1/2 FNPT Yes Quick Acting Toggle Valves are primarily used on cylinder filling operations and industrial applications where quick and precise on/off operation is necessary. ME791C NOTE: This valve flows in one direction. Installing the valve in the opposite direction of the arrow may cause the valve to not close properly and/or pump pressure may open the valve. FEATURES: Positive shutoff Corrosion resistant brass construction One hand operation Optional factory installed vent valve for safe release of captured product ME792C ME791CJ sales@mtankco.com

122 ENGINE FUEL BULKHEADS & CARB FITTINGS Engine Fuel Bulkheads Connection Connection MET443 3/8 Male Flare 1/4 FNPT (2 Ports) MET444 3/4-16 Male / 1/4 FNPT 1/4 FNPT (2 Ports) MET445 3/4-16 Male / 1/4 FNPT 1/4 FNPT (3 Ports) MET444 Marshall Excelsior s Engine Fuel Bulkheads provide a stationary point for motor fuel lines to pass thru sections of sheet metal. MET443 H Carburetion Filter & Fittings Inlet Outlet Side Port ME709 1/4 FNPT 1/4 MNPT ME229-EL 1-3/4 F. Acme 1/2 Male Flare ME8346 5/16 ID 3/8 Female Flare 1/4 FNPT ME709 The Gas/Air Filter is used to filter foreign materials and/or particles from LP-Gas systems such as motor fuel/carburetion systems. Also designed to be used to filter air supply lines for internal and emergency shutoff valve actuator systems. ME229-EL 90 Angle ME8346 Carburetion Hose Fitting ME8346 enables the installation of a 1/4 MNPT hydrostatic relief valve in a safe, protected area. This two-piece carburetion hose fitting fits all stainless steel braided LP-Gas hose with a 5/16 ID. The tank valve side has a 3/8 female flare swivel and zinc plated for maximum corrosion resistance. Marshall s Fitting ME229-EL allows connection of a motor fuel service line from 1-3/4 female Acme vapor outlet. Type I (QCC) Quick Filler Coupling Inlet Outlet MEP503 1/4 MNPT 1-5/16 Female Acme Quick Connect NOTE: A quick closing shutoff valve must be used with this coupling. Type I (QCC) Quick Filler Coupling Type I (QCC) Quick Filler Coupling designed to provide a fast, reliable connection for filling cylinders with Type I (QCC) style valves. The snap on/snap off design is intended to reduce labor and repetitive motion associated with threaded type filler couplings. This easy to operate filler coupling is durable, lightweight and will withstand the harshest working conditions while reducing cylinder valve thread wear. (ME791CJ Not Included) FEATURES: Durable glass filled nylon handle Easy snap on/off action for quick fill operation All stainless steel internal components Large bore stainless steel stem for increased flow Right or left hand operation Universal filler connection for all Type I (QCC) service valves LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 117

123 FILLER COUPLINGS & ADAPTERS Type I (QCC) Filler Couplings & Adapters Inlet Outlet Handle Style Body/Nipple Material ME515 Knurled Brass/Brass 7 ME516 1/4 MNPT 1-5/16 Female Acme Heavy Duty Forged Brass/Brass 6 ME516S Heavy Duty Forged Brass/Stainless Steel 6 OAL ME516S These full size Type I (QCC) Filler Couplings make filling DOT propane cylinders with a QCC connection quick and easy. Just a few turns allows the filler to attach and remove the coupling with minimal effort and loss of product. A longer body allows the filler coupling handle to remain outside the fixed collar of a cylinder. Can be used on a manual, electric or hydraulic system. In a manual system a shutoff valve (ME791C, ME791CJ, ME792C or ME792CJ) should be used with the filler coupling. WARNING: It is illegal to fill a 40 lb. or less DOT propane cylinder that has a standard POL connection. Inlet Outlet Handle Style Converts Type 1 (QCC) Filler Coupling to ME393 Male Soft Nose POL Knurled POL Filler Coupling ME393HD Male Soft Nose POL Heavy Duty Forged POL Filler Coupling 1-5/16 Male Acme/Female POL ME /4 Female Acme Knurled Motor Fuel Filler Coupling ME /4 Female Acme Knurled Tank Filler Coupling ME515 H The Type I (QCC) Thread replaces the POL connection on 40 lb. or less DOT propane cylinders. Marshall Excelsior has developed numerous adapters to allow quick conversion from Type I (QCC) to different fill applications for retailers who fill both 40 lb. or less and larger propane cylinders through the same line. Simply hand tighten the adapter to the Type I (QCC) filler coupling (ME515 or ME516 Series). ME569 ME393 ME393HD ME394 sales@mtankco.com

124 LPG FILLING HEADS Kosan LPG Filling Heads CAVAGNA GROUP Inlet Connection Outlet Connection 129A001 LPG 1/4 Air 3/8 NPT Standard Handwheel Valve, Male Thread Without SRV 129A002 Refrigerant 1/4 NPT - Air 3/8 NPT Standard Handwheel Valve, Male Thread, With and Without SRV 129A003* LPG 1/4 NPT Air 3/8 NPT Standard Handwheel Valve, POL Outlet, Female POL Thread Valves With and Without SRV 129A006 LPG 1/4 NPT Air 3/8 NPT Omeca Coupling, A009 LPG 1/4 Air 3/8 OPD - Female POL Thread Valve with Check-Lock With and Without SRV *Left hand version is available Cavagna Group s Filling Heads are made of corrosion-resistant materials such as stainless steel, brass, aluminum and special polymers. The rubber materials are developed and manufactured according to the requirements of EN 549 as well as Kosan s own strict specifications. The Cavagna Group quality control system carries as minimum an ISO 9001 certification and is continuously assessed by QCB. H Filling Head LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 119

125 BREAKAWAY COUPLINGS Breakaway Couplings Connection OAL Accessory Bracket Style Lanyard Style FNPT Length Reassembly Tool ME860S-6 ME861S-6 3/4 6 MEP128-6 ME860S-8 ME861S /4 ME860S-10 ME861S /4 7-3/4 Breakaway Couplings are designed to provide a safe way to transfer LP-Gas and NH 3 without sacrificing flow. The FloKill TM Breakaway Coupling flows both directions and protects against expensive loss of product or equipment damage if a pull-away occurs during a transfer operation. One end of the breakaway coupling should be attached to a fixed or sturdy point. In the event of an excessive amount of pull force, the breakaway coupling will separate and immediately shutoff product flow in both directions. To reconnect the valve, pressure needs to be relieved from both ends of the line, therefore it is recommended that a safe way to bleed down the line is provided upstream and downstream. After the lines have been depressurized use Marshall Excelsior s re-installation tool (MEP128-6) for 3/4 or slide the male end into the female side and pull the collar back until they lock. After reconnection the line must be tested using Marshall Excelsior Leak Detector to check for leaks before any product is transferred. The breakaway coupling may be used on vapor or liquid lines on transports, delivery trucks, motor fuel containers, fill cabinets and other miscellaneous filling operations. H NOTE: It is recommended that breakaway couplings be safety tested monthly to confirm that proper separation occurs in the event of a pull-away. Dry air is suggested for a source of pressure during testing. FEATURES: Nitrile soft seat provides positive shutoff both upstream and downstream of source lb. of force required for disconnect Approximately 100 lb. of force to reconnect Large internal bore for increased flow Durable plated steel construction Rated for LP-Gas and NH 3 ME860S-6 ME861S-6 MEP128-6 Coupling Not Included sales@mtankco.com

126 QCC CAPS, ADAPTERS, & CONNECTORS Type I (QCC)/OPD Valve Cap Fits Brass Black Vinyl ME392P ME /16 Female Acme ME392P ME392P installed on 20 lb. cylinder Type I (QCC) / OPD Valve Cap is designed to protect the 1-5/16 male Acme threads on Type I (QCC) or OPD type cylinder valves. Using a cap will reduce the likelihood of inadvertent damage to the valve s threads, shutoff mechanisms and sealing surfaces during storage or refurbishment. H ME Type I (QCC) Connector Outlet Inlet Flow Capacity 1/4 MNPT 1/4 Hose Barb 3/8 Hose Barb Handwheel Color Thermal Protection ME517 ME517-25H ME517-38H 1-5/16 Female Acme 50 SCFH Air/100,000 BTUH Black Yes ME518 ME518-25H ME518-38H 1-5/16 Female Acme 100 SCFH Air/200,000 BTUH Green Yes ME519 ME519-25H ME519-38H 1-5/16 Female Acme 200 SCFH Air/400,000 BTUH Red Yes Handwheel Thermal Inlet Flow Capacity Description Color Protection ME517EV 1-5/16 Female Acme Full Flow Black Yes Evacuation Coupling ME517 The Type I (QCC) Connectors ( ME517, ME518 and ME519 Series) are designed with a built-in excess flow feature and a positive shutoff that will not allow gas to flow until the connector is fully engaged. In case of a fire the built-in thermal protection on the QCC connector melts allowing the nipple to disengage from the tank connection and stop the flow of propane. These QCC connectors also provide a positive back check seal at disconnect to eliminate the propane in the hose from being released into the atmosphere. ME518-25H To connect a Type I (QCC) connector to a cylinder, close the cylinder valve and the control valves to all connected appliances. Hand tighten the QCC onto the cylinder and slowly open the cylinder valve. If the valve is opened too quickly, the excess flow device will be activated closing the flow of propane to the appliance. If the excess flow device is activated, close appliance control valves and wait 60 seconds to allow pressure in the line to equalize. Additional equalization time may be needed depending on the length of the hose. Turn on appliances by following the manufacturer s suggested lighting procedures. ME519 NOTE: The Type I (QCC) thread replaces the POL connection on 40 pound or less DOT propane cylinders. WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. ME517EV LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 121

127 QCC CAPS, ADAPTERS, & CONNECTORS Type I (QCC) Installation Adapters Packaged Inlet Outlet Shutoff Device ME /4 FNPT 1-5/16 Male Acme/Female POL ME393EX 1/4 FNPT 1-5/16 Male Acme/Female POL.9 GPM Excess Flow* ME393EX1.8 1/4 FNPT 1-5/16 Male Acme/Female POL 1.8 GPM Excess Flow* ME398 ME398P** Male Soft Nose POL 1-5/16 Male Acme/Female POL Quick Closing ME399 1/4 MNPT 1-5/16 Male Acme/Female POL Quick Closing *An excess flow device does not provide a 100% shutoff, a small amount of propane may leak if disconnected ** Packaged option consists of a plastic clamshell Type I (QCC) Installation Adapters provide a safe permanent outlet when installed into the household LP-Gas system. This permanent outlet eliminates the need for smaller containers when operating outdoor LP-Gas equipment. It is recommended that a shutoff valve be installed upstream from the adapter inlet to facilitate future servicing. The adapters can be used with both Type I (QCC) and male POL connections. ME398 and ME399 include an internal shutoff valve which provides a leak free means for outdoor equipment to be safely connected and disconnected without shutting down the entire system. H NOTE: To use the female POL on the ME393 series, simply remove the internal gasket. The gasket must be in place to use the Type I (QCC) connection. WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. ME398P ME399 ME393-1 sales@mtankco.com

128 POL ADAPTERS Male POL x 1/4 MNPT Male Hard Nose POL Male Soft Nose POL Male Hard Male Hard Nose POL Nose POL 90 Angle Male Soft Connection Male POL Description Nose POL ME318, ME318P* ME345 ME1629 7/8 Nut ME322 7/8 Nut, 3-1/2 OAL ME1654 Plastic Handwheel ME1654AH Hex Handwheel ME1654AR Round Handwheel ME319 ME /8 Nut ME1690, ME1690P* ME1641 1/4 MNPT.9 GPM Excess Flow, 7/8 Nut ME GPM Excess Flow, Plastic Handwheel ME1653AH.9 GPM Excess Flow, Hex Handwheel ME1653AR.9 GPM Excess Flow, Round Handwheel ME169.9 GPM Excess Flow, 1-1/8 Nut ME1690-EX18 ME1641EX GPM Excess Flow, 7/8 Nut ME1638 #60 Orifice Hole, 7/8 Nut *Packaged option consists of a plastic clamshell I Plastic Handwheel ME345 Male POL x Hose Barbs Hex Handwheel Round Handwheel Male Hard Male Hard Nose POL Nose POL 90 Angle Hose I.D. Male POL Description ME5930 ME N 1/4 7/8 Nut ME N ME SN 3/8 7/8 Nut ME N ME N 1/4 1-1/8 Nut ME5931 ME5931-SN 3/8 1-1/8 Nut ME1656 1/4 Plastic Handwheel ME1656AH 1/4 Hex Handwheel ME1656AR 1/4 Round Handwheel ME1683 ME N 1/4.9 GPM Excess Flow, 7/8 Nut ME5931EX-78N ME5931SNEX-78N 3/8.9 GPM Excess Flow, 7/8 Nut ME1684 1/4.9 GPM Excess Flow, 1-1/8 Nut ME1655 1/4.9 GPM Excess Flow, Plastic Handwheel ME1655AH 1/4.9 GPM Excess Flow, Hex Handwheel ME1655AR 1/4.9 GPM Excess Flow, Round Handwheel ME1655EX18-78N 1/4 1.8 GPM Excess Flow, 7/8 Nut ME1657 1/4 #60 Orifice Hole, 7/8 Nut WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 123

129 POL ADAPTERS Single Piece POL Adapters POL x Male Flare POL Excess Male Connection Flow Flare ME353 Male Hard Nose 3/8 ME353-SN Male Soft Nose 3/8 ME353EX9.9 GPM 3/8 ME353EX18 Male Hard Nose 1.8 GPM 3/8 ME355 1/2 ME355-SN Male Soft Nose 1/2 ME355EX9.9 GPM 1/2 ME355EX18 Male Hard Nose 1.8 GPM 1/2 ME356 5/8 ME356-SN Male Soft Nose 5/8 ME356EX9.9 GPM 5/8 Male Hard Nose ME356EX GPM 5/8 POL x MNPT POL Excess Male Connection Flow Flare ME284 1/4 ME285 3/8 Female ME286 1/2 ME287 3/4 ME352 3/8 ME354 1/2 Male Hard Nose ME354EX9.9 GPM 1/2 ME354EX GPM 1/2 POL x FNPT POL Connection FNPT ME300 1/8 ME301 1/4 ME302 Female 3/8 ME303 1/2 ME304 3/4 ME351 Male Hard Nose 1/4 ME357 1/2 ME285 ME353EX18 I POL x MNPT POL Connection POL Connection ME305 Female Female ME353 WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. ME303 POL Cap and Plugs Brass Plastic Style Body Only Body With Chain Body Only ME1691 ME ME970P Male Hard Nose POL Plug ME1699 Female POL Cap ME1699 ME1691 ME970P sales@mtankco.com

130 POL ADAPTERS POL Thread Clean Out Tool POL Thread Clean Out Tool is designed for use with any female POL thread or valve inlet opening. Allows operator to safely remove debris and other foreign material from female NGO left hand threads (female POL) without damaging threads. Simply thread clean out tool into female POL threads using handwheel until the tool reaches the final thread. Reverse and remove tool carefully. Reverse tool and use attached 7/8 diameter bottle brush to perform final clean out operation. Blow out any remaining debris by using a compressed air line. FEATURES: Constructed from hardened tool steel and plated for maximum product life Four clearance flutes to allow debris to be channeled away from threads Convenient 7/8 diameter wire brush for final clean out MEP100 WARNING: The POL thread clean out tool is strictly intended for use as a cleaning device and in no way should be used as a gauge to determine the usability of the thread. (Always refer to NFPA 58 and follow the appropriate guidelines prior to installing LP-Gas lines). Tee Check Manifolds I MEP456A Inlet Inlet Outlet Nut Size ME1701A Female POL Female POL Male Hard Nose POL 7/8 ME1702A Female POL Female POL Male Hard Nose POL 1-1/8 ME1705A Female POL Female POL 1/4 MNPT ME1700A 1/4 Female Inverted Flare 1/4 Female Inverted Flare 1/4 MNPT MEP456A* 1/4 Female Inverted Flare 1/4 Female Inverted Flare 1/4 MNPT * Manual change over Tee Check Manifolds are designed to connect two cylinders. The check keeps the two tanks equalized and allows each tank to be changed without disrupting the flow of propane to appliances or dispensing large amounts of LP-Gas into the atmosphere from the other tank. When changing out a tank, simply close the tank valve and disconnect. The check will automatically move to the closed tank valve side to seal off the inlet of that tank allowing minimal LP-Gas discharge into the atmosphere. Primary uses are for mobile homes, single appliances, recreational vehicles or summer cottages. The manual changeover works the same as the check except it requires the consumer to manually close the manifold valve on the side of the tank being changed over. ME1701A ME1705A ME1700A LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 125

131 POL ADAPTERS Multiple Cylinder Tee Block Manifolds Inlet Inlet Outlet Nut Size ME1701 Female POL Female POL 1/4 FNPT ME1701B Female POL Female POL Male Hard Nose POL 7/8 ME1702B Female POL Female POL Male Hard Nose POL 1-1/8 ME1701B-SN Female POL Female POL Male Soft Nose POL 7/8 ME1701X Female POL Female POL Male.9 GPM Excess Flow Hard Nose POL 7/8 ME1701B-X-SN Female POL Female POL Male.9 GPM Excess Flow Soft Nose POL 7/8 ME1704B Female POL Female POL Female POL 1-1/8 ME1700B 1/4 Female 1/4 Female 1/4 MNPT Inverted Flare Inverted Flare ME-T /4 FNPT 1/4 FNPT 1/4 MNPT ME1701B Multiple Cylinder Tee Block Manifolds are designed to connect multiple cylinders to automatic changeover regulators. These manifolds have no check and are primarily for systems requiring more than one cylinder to be in operation at a time. The appropriate pigtail must be used to connect the manifold inlet to the service cylinder valve. WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. ME1704B I ME-T9-444 sales@mtankco.com

132 POL ADAPTERS High Pressure Gas Connections ME23C Soft Nose POL Hose Barb Hose Barb Assembly Only Nut Only Hose I.D. Male Hard Male Soft Connection POL Description Nose POL Nose POL Threads ME23C ME23C-1 ME23C-2 1/4 9/16-18 Female Left Hand ME23E ME23E-1 ME23C-2 3/8 9/16-18 Female Left Hand ME1650 ME1650SN 7/8 Nut ME /8 Nut ME1689 ME N ME1645 9/16-18 Male Left Hand.9 GPM Excess Flow, 7/8 Nut.9 GPM Excess Flow, Plastic Handwheel ME GPM Excess Flow, 1-1/8 Nut ME1689-EX GPM Excess Flow, 7/8 Nut I Hard Nose POL ME24C Outlet Bushings Male Left Hand Thread Thread ME24C 9/ /4 MNPT ME24E 9/ /8 MNPT ME24F 9/ /2 MNPT ME26C 9/ /16-18 Male Left Hand WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. FLARE/BRASS FITTINGS Last Chance Adapters ME480 ME480EX Inlet Outlet Description ME480 ME480EX ME480EX1.8 ME481 ** 1-20 Female 1-5/16 Male Acme/Female POL Full Flow.9 GPM Excess Flow 1.8 GPM Excess Flow Shutoff Poppet * An excess flow device does not provide a 100% shutoff, small amounts of propane may leak if disconnected ** Adapter ME481 may be ordered in a plastic packaging (item number ME481P) Last Chance Adapters provide a quick way to change from a 20 pound cylinder to a 1 pound disposable cylinder. Can be used to connect a small 1 pound disposable cylinder to a gas grill or other appliance. NOTE: To use the male POL on the ME393 series, simply remove the internal gasket. The gasket must be in place to use the Type I (QCC) connection. WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. ME481P LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 127

133 FLARE/BRASS FITTINGS MEC Space Saver Dielectric Unions Description OAL ME Dielectric Union 1/2 MNPT x 3/8 Male Flare 3-3/8 ME Dielectric Union 3/4 MNPT x 3/8 Male Flare 3-1/2 ME Dielectric Union 1/2 MNPT x 1/2 Male Flare 3-1/2 ME Dielectric Union 3/4 MNPT x 1/2 Male Flare 3-5/8 ME Dielectric Union 1/2 MNPT x 5/8 Male Flare 3-5/8 ME Dielectric Union 3/4 MNPT x 5/8 Male Flare 3-3/4 ME The ME690 Series Dielectric Unions are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion. The ME690 dielectric union would typically be installed at the ASME tank directly downstream of the first stage regulator but prior to underground piping and/or at the inlet of the second stage regulator above ground at the dwelling. Thus, it protects the underground metallic piping from corrosion and electrical current. FEATURES: Heavy duty brass construction Convenient Male NPT x Male SAE flare connection to minimize potential piping leak points and extra fittings Compact size for tight spaces Wide wrench flats for easy installation Will not conduct an electrical charge from one side of the union to the other I sales@mtankco.com

134 FLARE/BRASS FITTINGS Flare Fittings & Pipe Thread Adapters Reducing Unions O.D. Tube Size MEF /2 x 3/8 MEF /8 x 3/8 MEF /8 x 1/2 Reducing Forged Swivel Nuts O.D. Tube Size ME-US /2 x 3/8 ME-US /8 x 1/2 Forged Swivel Nuts O.D. Tube Size ME-US4-6 3/8 ME-US4-8 1/2 ME-US4-10 5/8 Forged Female Elbows O.D. Tube Size FNPT MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /2 3/8 MEF /2 1/2 MEF /2 3/4 MEF /8 1/2 MEF /8 3/4 I Male Connectors O.D. Tube Size MNPT MEF /4 1/8 MEF /4 1/4 MEF /8 1/8 MEF /8 1/4 MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /2 1/4 MEF /2 3/8 MEF /2 1/2 MEF /2 3/4 MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /4 1/2 MEF /4 3/4 Female Connectors O.D. Tube Size FNPT MEF /4 1/4 MEF /8 1/4 MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /2 3/8 MEF /2 1/2 MEF /2 3/4 MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 Pipe Threads Unions MNPT MNPT MEF /8 1/8 MEF /4 1/4 MEF /8 3/8 MEF /8 1/2 MEF /2 1/2 MEF /4 3/4 Tube Nut O.D. Tube Size MEF41-6 3/8 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 129

135 FLARE/BRASS FITTINGS Flare Fittings & Pipe Thread Adapters Forged Male Elbows O.D. Tube Size MNPT MEF /4 3/8 MEF /8 1/4 MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /2 1/4 MEF /2 3/8 MEF /2 1/2 MEF /2 3/4 MEF /8 1/2 MEF /8 3/4 2 Way Forged Elbows O.D. Tube Size MEF55-6 3/8 MEF55-8 1/2 MEF /8 MEF /4 Male Tee O.D. Tube Size MEF /8 MEF /2 MEF /8 I Flare Caps O.D. Tube Size ME /4 ME /8 ME /2 ME /4 Flare Plugs O.D. Tube Size MEP2-4 1/4 MEP2-6 3/8 MEP2-8 1/2 MEP2-12 3/4 Female Tee FNPT ME /4 Short Forged Nuts O.D. Tube Size ME-NS4-4 1/4 ME-NS4-6 3/8 ME-NS4-8 1/2 ME-NS4-10 5/8 ME-NS4-12 3/4 Full Unions O.D. Tube Size MEF /4 MEF /8 MEF /2 MEF /8 Reducing Forged Nuts O.D. Tube Size ME-NS /8 x 1/4 ME-NS /2 x 1/4 ME-NS /2 X 3/8 ME-NS /8 X 1/2 sales@mtankco.com

136 COPPER TUBING Refrigeration Copper Tubing, O.D. O.D. Tube Size Length Wall Thickness CT0450 1/ CT0650 3/ CT / CT0850 1/ CT / CT1050 5/ CT / This item is sold by outside diameter (O. D.) Type K Copper Tubing, I.D. CT0650 I. D. Tube Size Length Wall Thickness KT0460 1/ KT / KT0660 3/ KT / KT0860 1/ KT / This item is sold by inside diameter (I. D.) I Type L Copper Tubbing I. D. Tube Size Length Wall Thickness LT0460 1/ LT / LT0660 3/ LT / LT0860 1/ LT / This item is sold by inside diameter (I. D.) COATED COPPER TUBING Coated Refrigeration Copper Tubing, O.D. GT0650 O.D. Tube Size Length Wall Thickness GT0650 3/ GT / GT0850 1/ GT / GT1050 5/ GT / This item is sold by outside diameter (O. D.) LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 131

137 COATED COPPER TUBING Coated Type L Copper Tubing, I.D. I. D. Tube Size Length Wall Thickness GTL0460 1/ GTL / GTL0660 3/ GTL / GTL0860 1/ GTL / This item is sold by inside diameter (I. D.) CORRUGATED STAINLESS STEEL TUBING TracPipe CounterStrike Tubing OMEGAFLEX Size Reel Length Reel Weight (lb.) FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS FGP-CS FGP-CS FGP-CS FGP-CS FGP-CS FGP-CS FGP-CS TracPipe I NOTE: Other lengths of TracPipe CounterStrike Tubing are available. Contact your MTankCo representative for more information. FEATURES: Heavy one piece abrasion and lightning resistant jacket Up to 125 PSI working pressure Highest Capacity Rating (EHD) Auto Flare Fitting is both self-flaring and self-piloting to pipe s inner diameter Meets ASTM E84 with respect to flame spread and smoke density sales@mtankco.com

138 GAS PIPING Underground System PS-II Reels TRACPIPE FGP-UGP Size Reel Length Description FGP-UGP /8 250 ft. TracPipe PS-II 3/8 Reel FGP-UGP /2 250 ft. TracPipe PS-II 1/2 Reel FGP-UGP /2 100 ft. TracPipe PS-II 1/2 Reel FGP-UGP /4 250 ft. TracPipe PS-II 3/4 Reel FGP-UGP /4 100 ft. TracPipe PS-II 3/4 Reel FGP-UGP ft. TracPipe PS-II 1 Reel FGP-UGP ft. TracPipe PS-II 1 Reel Underground System PS-II Adapters and Couplings TRACPIPE Size Description FGP-UGF-375 3/8 NPT Male TracPipe PS-II 3/8 Male Adapter FGP-UGF-500 1/2 NPT Male TracPipe PS-II 1/2 Male Adapter FGP-UGF-750 3/4 NPT Male TracPipe PS-II 3/4 Male Adapter FGP-UGF NPT Male TracPipe PS-II 1 Male Adapter FGP-UGC-375 3/8 T/P Cplg TracPipe PS-II 3/8 Coupling FGP-UGC-500 1/2 T/P Cplg TracPipe PS-II 1/2 Coupling FGP-UGC-750 3/4 T/P Cplg TracPipe PS-II 3/4 Coupling FGP-UGC T/P Cplg TracPipe PS-II 1 Coupling I Coupling FGP-UGC-750 Male Adapter FGP-UGF-750 AutoSnap Straight Fittings TRACPIPE AutoSnap Straight Fitting Size Description FGP-SFST-375 3/8 AutoSnap 3/8 FGP-SFST-500 1/2 AutoSnap 1/2 FGP-SFST-750 3/4 AutoSnap 3/4 FGP-SFST AutoSnap 1 FGP-SRING-375 3/8 FGP-SRING-500 1/2 FGP-SRING-750 3/4 Spare Snap Rings FGP-SRING LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 133

139 GAS PIPING Reducing Fittings TRACPIPE Size Description FGP-RST /2-3/4 NPT AutoFlare Reducing 1/2 FGP-RST /4-1/2 NPT AutoFlare Reducing 3/4 FGP-RST /4 NPT AutoFlare Reducing 1 Reducing Fitting Female Straight Fittings TRACPIPE Size Description FGP-FSTF-375 3/8-1/2 NPT AutoFlare Female Straight 3/8 FGP-FSTF-500 1/2 AutoFlare Female Straight 1/2 FGP-FSTF-750 3/4 AutoFlare Female Straight 3/4 FGP-FSTF AutoFlare Female Straight 1 FGP-FSTF /4 AutoFlare Female Straight 1-1/4 FGP-FSTF /2 AutoFlare Female Straight 1-1/2 Female Straight Fitting Couplings TRACPIPE Size Description FGP-CPLG-375 3/8 Coupling 3/8 FGP-CPLG-500 1/2 Coupling 1/2 FGP-CPLG-750 3/4 Coupling 3/4 FGP-CPLG Coupling 1 FGP-CPLG /4 Coupling 1-1/4 FGP-CPLG /2 Coupling 1-1/2 FGP-CPLG Coupling 2 Coupling I Flange Fittings TRACPIPE Size Description FGP-BFF-375 3/8 Flange Fitting 3/8 FGP-BFF-500 1/2 Flange Fitting 1/2 FGP-BFF Flange Fitting 1 FGP-BFF /4 Flange Fitting 1-1/4 FGP-TERM-BRAC All Flange L Bracket FGP-ELLB-375 3/8 90 Flange Fitting 3/8 FGP-ELLB-500 1/2 90 Flange Fitting 1/2 FGP-BF90V-375 3/8 90 Flange Valve 3/8 FGP-BF90V-500 1/2 90 Flange Valve 1/2 FGP-BF90V-750 3/4 90 Flange Valve 3/4 Flange Fitting sales@mtankco.com

140 GAS PIPING Meter Termination and Mounts TRACPIPE Meter Termination Size Description FGP-MT /2 x 6 6 Meter Termination 1/2 FGP-MT /4 x 6 6 Meter Termination 3/4 FGP-MT x 6 6 Meter Termination 1 FGP-MT Meter Termination 1 FGP-MT /2 x Meter Termination 1/2 FGP-MT /4 x Meter Termination 3/4 FGP-MT x Meter Termination 1 FGP-MT-BRAC All Meter Termination Bracket FGP-TM-375 3/8 Termination Mount 3/8 FGP-TM-500 1/2 Termination Mount 1/2 FGP-TM-750 3/4 Termination Mount 3/4 FGP-TM /4 x 1/2 Termination Mount 3/4 x 1/2 FGP-TM Termination Mount 1 FGP-90TM-375 3/8 90 Termination Mount 3/8 FGP-90TM-500 1/2 90 Termination Mount 1/2 FGP-TM90V-375 3/8 90 Termination Valve 3/8 FGP-TM90V-500 1/2 90 Termination Valve 1/2 FGP-TM90V-750 3/4 90 Termination Valve 3/4 Termination Mounts I Tee Fittings TRACPIPE Tee Fitting Size Description FGP-T /2 x 3/4 Male Tee - Male 3/4 FGP-T /2 Female Tee - Female 1/2 FGP-T /4 x 1/2 Female Tee - Female 1/2 FGP-T /4 Female Tee - Female 3/4 FGP-T Female Tee - Female 1 FGP-TF500-T500 1/2 x 1/2 Tee - TracPipe 1/2 FGP-TF750-T750 3/4 x 3/4 Tee - TracPipe 3/4 FGP-TF1000T x 1 Tee - TracPipe 1 Tee Reducer Fittings are available in various sizes. Contact your MTankCo representative for more information. Manifolds TRACPIPE Manifold Size Description FGP-MI-PC 3/4 x 1/2 x 1/2 (4) Coated Manifold FGP-MB2 Fits MI-PC Manifold Bracket FGP-MI-ST-500 1/2 F- M x 1/2 (2) Stackable Manifold FGP-MI-ST-750 3/4 F- M x 1/2 (2) Stackable Manifold FGP-MI-ST Fits MI-ST Stackable Manifold Bracket FGP-LC Load Center w/ Bracket FGP-MI-PC-1X 1-1/4 x 1 x 3/4 (4) Large Coated Manifold FGP-MI-PC-2X 2 x 1-1/2 x 1 (4) Large Coated Manifold LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 135

141 GAS PIPING Protection TRACPIPE Size Description FGP-SP x 2 Quarter Striker Plate FGP-SP x 7 Half Striker Plate FGP-SP x 9 Three Quarter Striker Plate FGP-SP x 12 Full Striker FGP-SP /2 x 17 Striker Plate FGP-FPY-375CT 3/4 Floppy, Fits 3/8 Cut 1 ft. FGP-FPY-500CT 1 Floppy, Fits 1/2 Cut 1 ft. FGP-FPY-750CT 1-1/4 Floppy, Fits 3/4 Cut 1 ft. FGP-FPY-1000CT 1-1/2 Floppy, Fits 1 Cut 1 ft. FGP-FPY /4 Floppy, Fits 3/8 FGP-FPY Floppy, Fits 1/2 FGP-FPY /4 Floppy, Fits 3/4 FGP-FPY /2 Floppy, Fits 1 FGP-FPY Floppy, Fits 1-1/4 FGP-FPY /2 Floppy, Fits 1-1/2 FGP-FPY Floppy, Fits 2 FGP H-12BL 1 x 12 yd Tape, Black FGP-LCS 1 Quart Non-Corrosive Leak Check Solution Three Quarter Striker Plate FGP-SP-075 Full Striker FGP-SP-100 Protection Size Description TRACPIPE FGP-GC-1 1/2-1 IPS Bonding Clamp for 3/8, 1/2 TracPipe CounterStrike FGP-TC-15 3/8-1 Cutter No. 15 FGP-QDS 1/2 Sturgis Quick Disconnect FGP-ITAG-50 All Installation Tags FGP-TAG-20 All High Pressure Tags FGP-ITAG-50 Installation Tags I PLASTIC PIPE Plastic Pipe Description PP08 1/2 CTS Tubing, 500 Roll - SDR 7 PP12 3/4 IPS Tubing, 500 Roll - SDR 11 PP16X500 1 IPS Tubing, 500 Roll - SDR 11 PP20X /4 IPS Tubing, 500 Roll - SDR 10 PP32X250 2 IPS Tubing, 250 Roll - SDR 11 PP32X500 2 IPS Tubing, 500 Roll - SDR 11 This item is sold in CTS (copper tube size) and IPS (iron pipe size). sales@mtankco.com

142 CON-STAB FITTINGS Con-Stab Fittings CON-STAB Couplings CON-STAB Description /2 CTS x 1/2 CTS x 3/4 IPS /4 IPS x 3/4 IPS x 1/2 CTS IPS x 1 IPS x 3/4 IPS Description /2 CTS /4 IPS IPS /4 IPS IPS Reducing Tee Coupling 90 Elbow CON-STAB Reducing Couplings CON-STAB I Description /2 CTS /4 IPS IPS /4 IPS IPS Description /4 IPS x 1/2 CTS IPS x 1/2 CTS IPS x 1 CTS IPS x 3/4 IPS Reducing Tee Reducing Coupling LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 137

143 CON-STAB FITTINGS Repair Couplings CON-STAB Tees CON-STAB Description /2 CTS x 8 long /2 CTS x 12 long /2 CTS x 24 long /4 IPS x 8 long /4 IPS x 12 long /4 IPS x 24 long IPS x 8 long IPS x 12 long Description /2 CTS /4 IPS IPS /4 IPS IPS Repair Coupling Tee Self-Tapping Tee CON-STAB Chamfer Tool CON-STAB Description /4 IPS Main x 1/2 CTS /4 IPS Main x 3/4 IPS IPS Main x 1/2 CTS IPS Main x 3/4 IPS IPS Main x 1 IPS Description /4 IPS x 1/2 CTS Chamfer Tool (5/8 O.D.) /4 IPS Chamfer Tool IPS Chamfer Tool IPS x 1 CTS Chamfer Tool I Chamfer Tool Self-Tapping Tee sales@mtankco.com

144 RISERS Plastic Pipe Risers CON-STAB Plastic Pipe Riser Size (MPT X PE) Wall /2 MPT X 1/2 CTS (5/8 OD) PE /2 MPT X 1/2 IPS PE SDR-9.3 (.090) /4 MPT X 1/2 CTS (5/8 OD) PE /4 MPT X 1/2 IPS PE SDR-9.3 (.090) /4 MPT X 3/4 CTS (7/8 OD) PE /4 MPT X 3/4 IPS PE SDR-11 (.095) /4 MPT X 1 CTS (1-1/8 OD) PE.099/ MPT X 1/2 CTS (5/8 OD) PE MPT X 1/2 IPS PE SDR-9.3 (.090) MPT X 3/4 CTS (7/8 OD) PE MPT X 3/4 IPS PE SDR-11 (.095) MPT X 1 CTS (1-1/8 OD) PE.099/ /4 MPT X 1 CTS (1-1/8 OD) PE.099/ MPT X 1 IPS PE SDR-11 (.119) * 1-1/4 MPT X 1-1/4 IPS PE SDR-10 (.116) * This item does not include a liner sleeve, all other risers come with a liner sleeve. ORDERING NOTE: All Risers come in 36, 60, 72, 84, and 96 lengths. When ordering, add a dash then the riser length after the prefix Item Number, i.e. XXXXXX-72 indicates a 72 inch length riser. I NOTE: Slide the plastic tubing through the riser to the end and make your connection there, above ground. No connections underground, no coupling needed. FEATURES: Simplified compression style anodized service head Reusable fitting with Buna seal, strengthened with a spiral steel stiffener Integral swivel for easy installation Complete with poly liner and lower moisture seal Meets or exceeds NFPA58 and ANSI standards LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 139

145 APPLIANCE CONNECTORS Stainless Steel Gas Appliance Connectors DORMONT Length Description 1637NX NX NX NX NX NX NX NX NX NX NX NX /8 ID / 1/2 OD with 1/2 Female x 1/2 Male 1/2 ID / 7/8 OD with 3/4 Female x 3/4 Male 1637NX12 Dormont Residential Connectors are durable, flexible, and easy to install. Designed with built-in safety features, Supr-Safe connectors help prevent dangerous gas leaks and provide for a long and trouble-free service life. Super-Safe Connectors for Mobile Homes DORMONT Length Description 1675NPX /4 I.D. / 1 O.D. 1675NPX /4 I.D. / 1 O.D. I Dormont Black Appliance Connectors DORMONT Length Description /4 ID x 3/8 OD - 3/8 MPT x 1/2 FNPT Dormont Black Appliance Connectors are specifically designed for high-temperature applications such as gas logs, fireplace inserts, etc. They reduce glare and hide the connector from view. 1675NPX24 sales@mtankco.com

146 DOMESTIC TANK VALVES & ACCESSORIES Liquid Transfer Valves & Adapters Accessories Liquid Liquid Withdrawal Tank Valve Closing Withdrawal 1-5/8 UNF Male Material Excess Hydrostatic Vent Flow Flow/ Adapter 3/4 3/4 1-1/4 MNPT Relief Valve Valve GPM FNPT x 1-5/8 UNF MNPT Brass Steel* Brass Brass Steel* Stainless Steel* ME449 Brass No ME458 ME458S ME460*** ME462*** MEH225 MEH25/450 ME449H Brass No ME458 ME458S Factory Installed MEH225 ME449S Ductile Iron* No ME458S ME462S*** ME462SS*** MEH225SS/350 ME449EXS/22 Ductile Iron* Yes 22 MEH225SS/400 ME449EXS/28 Ductile Iron* Yes 28 MEH225SS/440 ME450** Brass No ME601-6 ME *Rated for LP-Gas and NH 3 ** MEJ400 Vent Valve factory installed *** Includes an excess flow feature MEJ400 MEJ400SC MEJ400/72 MEJ402S Liquid Transfer Valves and Adapters provide a safe means by which to transfer liquid from a tank during an emergency or container relocation. These valves can be equipped with an integral excess flow device for direct product transfer or without when used in conjunction with liquid withdrawal adapter (ME458 Series) and tank valve (ME460 and ME462 Series). WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. FEATURES: Double O-ring stem seal design ensures leak free operation 3/4 MNPT inlet x 3/4 FNPT outlet Double lead stem thread ensures quick and efficient operation J ME450 STEEL TRANSFER VALVES FEATURES: All stainless steel internal components Durable ductile iron valve body with automotive grade powder coat finish Equipped with convenient upstream and downstream 1/4 FNPT plugged ports for optional accessories TANK VALVE FEATURES: Provides excess flow protection in the event of a downstream connection or line failure Safety breakaway feature leaves valve seals intact in the event of truck roll-away 6-14 PSIG closing flow pressure differential for maximum product transfer Fully interchangeable with all existing valve models and adapters Meets requirements for installation into DOT storage containers like bobtails and transports Steel model features a rust inhibitor compound between the cap and body threads to prevent corrosion ME449EXS-22 ME462S LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 141

147 DOMESTIC TANK VALVES & ACCESSORIES Liquid Transfer Adapters Material Inlet Connection Outlet Connection ME458 Brass 1-5/8 UNF 3/4 FNPT ME458S* Steel 1-5/8 UNF 3/4 FNPT ME453 Brass 3/4 NGT 3/4 FNPT ME455 Brass 3/4 NGT 3/4 MNPT ME453 * Rated for LP-Gas and NH 3 Liquid Transfer Adapters are designed for use between the liquid transfer shutoff valve and the liquid withdrawal tank valve. These adapters enable the tank valve to open properly and allows a tight seal when transferring liquid. Special threads on the tank valve and the adapter help eliminate tampering. ME458 The ME458 Series fits all new underwriters laboratories listed valves. The ME453 and ME455 fit older style liquid withdrawal tank valves that are still in service and have not been replaced. They will not provide a positive seal during actuation of liquid withdrawal tank valve until fully seated. ME455 Combination Valves Container Two Service Dip Tube Accessories Material Connection Connection Connection Stainless Steel Stainless Steel MNPT FNPT FNPT Vent Valve Pressure Gauge* ME830 Ductile Iron 3/4 MNPT 1/4 FNPT 1/8 Included MEJ526 MEJ542 MEJ415 Steel 3/4 MNPT 1/4 FNPT 1/8 MEJ402S MEJ542 MEJ415G Steel 3/4 MNPT 1/4 FNPT 1/8 Included Included * PSIG Combination Valves have a pressure gauge and fixed tube liquid level gauge all in one valve. The shutoff portion of the valve increases the pressure gauge s life and accuracy by eliminating constant gauge pressure and allows for easy gauge replacement. To replace a gauge simply close the valve and open the vent valve to relieve pressure before disassembling pressure gauge. The valve can be installed at the maximum fill level or an 1/8 MNPT dip tube can be installed on the container connection side to set any liquid level desired. For use in ASME bulk storage containers and DOT transport tank installations. ME830 DJ FEATURES: All steel and stainless steel component construction Integral #54 orifice provides gauge dampening protection Durable ductile iron body with automotive grade powder coat finish or plated steel body MEJ415 MEJ415G sales@mtankco.com

148 DOMESTIC TANK VALVES & ACCESSORIES Multipurpose Valves Approximate Excess Flow Inlet Fill Connection *GPM/LPG Closing Flow Back Accessories (MNPT) (M. Acme) Fill Capacity Liquid* Vapor** Check Hydrostatic Vent GPM/LPG SCFH/LPG Relief Valve ME670DBC 1-1/4 1-3/4 100 N/A N/A Yes MEH225*** MEJ400*** MEH225SS MEJ402S ME670DEX**** 1-1/4 1-3/ ,000 No MEH225*** MEJ400*** MEH225SS MEJ402S * For NH 3 flow rates multiply by.90 ** For NH 100 PSI, Multiply by 1.6 *** Brass accessories cannot be used for NH 3 **** Available for 45 GPM NH 3 closing flow - e.i. ME670DEX/45 Multipurpose Valves are intended for use as a high capacity filler valve with a manual shutoff device in LPG or NH 3 containers. These valves can be equipped with either a soft seat back check or excess flow feature that is internal to the container. The excess flow version can also be used as a vapor equalizing valve typically found in NH 3 applicators and nurse tank applications. NOTE: For proper operation and performance of the excess flow feature the manual shutoff must be completely open and back seated. ME670DBC FEATURES: Plated ductile iron body with 1/4 NPT auxillary plugged port All stainless steel internal construction for maximum corrosion resistance Supplied with ACME cap and chain assembly V-cup Teflon packing stem seals Rated 400 PSI/WOG Removable data plate ME670DEX J ME671D-8 Multipurpose Withdrawal Valves Approximate Inlet Withdrawal Excess Flow Back Accessories (MNPT) (FNPT) Closing Flow Liquid Check Hydrostatic Vent GPM/LPG* Relief Valve MEJ400** ME671DIBC-6 3/4 50 MEJ402S MEJ400** ME671DIBC-8*** 1 58 MEJ402S ME671D-6 1-1/4 3/4 50 No MEH225** MEJ400** MEH225SS MEJ402S ME671D-8*** 1 58 MEH225** MEJ400** MEH225SS MEJ402S ME672D 1 78 MEH225** MEJ400** MEH225SS MEJ402S * For NH 3 flow rates multiply by.90 ** Brass accessories cannot be used for NH 3 service *** Available for 45 GPM NH 3 closing flow - e.i. ME671D-8/45 ME672D The ME671DIBC has an integrated back check (IBC) feature built into the lower portion of the seat disc assembly. This allows liquid pressure built upstream of the shut-off disc assembly to automatically be relieved back to the container when line pressures exceed PSI over container pressure. The (IBC) feature eliminates the need for hydrostatic relief valves to protect upstream piping or lines as well as greatly reducing product emissions and overall system safety. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 143

149 DOMESTIC TANK VALVES & ACCESSORIES Multipurpose Filler/Withdrawal Valves Approximate Excess Flow Inlet Fill Connection Withdrawal *Fill Capacity Closing Flow Back Accessories (MNPT) (M. Acme) (FNPT) GPM/LPG *Liquid **Vapor Check Hydrostatic Vent GPM/LPG SCFH/LPG Relief Valve ME673DEX-6**** 3/ ,000 No ME673DEX-8**** ,000 No 1-1/4 1-3/4 100 ME673DBC-6 3/4 Yes ME673DBC-8 1 Yes MEH225*** MEH225SS MEH225*** MEH225SS MEH225*** MEH225SS MEH225*** MEH225SS MEJ400*** MEJ402S MEJ400*** MEJ402S MEJ400*** MEJ402S MEJ400*** MEJ402S * For NH 3 Flow Rates Multiply by.90 ** For 100 PSI, Multiply by 1.6 *** Brass accessories cannot be used for NH 3 ****Available for 45 GPM NH 3 closing flow - e.i. ME673DEX-6/45 Multipurpose Filler/Withdrawal Valves are intended for use as a high capacity combination filler and liquid withdrawal valve with a manual shut off device in LPG or NH 3 containers. These valves can be equipped with either a soft seat back check or excess flow feature that is internal to the container. Ideally suited for use in dispensing applications as a dual purpose high capacity tank filler valve as well as a liquid return line from the pump bypass valve. ME673DEX NOTE: For proper operation and performance of the excess flow feature the manual shutoff must be completely open and back seated. FEATURES: Plated ductile iron body with 1/4 NPT auxillary plugged port All stainless steel internal construction for maximum corrosion resistance Supplied with ACME cap and chain assembly V-cup Teflon packing stem seals Rated 400 PSI/WOG Removable data plate ME673DBC ASME Tank Filler Valves Filler Valve Hose End M. Acme Protective Cap Additional MNPT Connection Included Keys ME600-6* 3/4 1-3/4 Yes ME ME600-10* 1-1/4 1-3/4 Yes ME ME /4 1-3/4 Yes ME /4 1-3/4 Yes *Manual Shutoff DJ ASME Tank Filler Valves allow maximum product transfer with its manually operated open throat design. They have an integral high flow primary soft-seat back check and a manually operated secondary shutoff valve for maximum protection against leaks. There is no need for a flow restricting fill check adapter when using these valves. FEATURES: Allows 25-50% more product flow during filling operations Manual valve portion assures operator when valve is open or closed Removable key provided Made with a durable Nitrile O-ring primary back check seal and reliable Teflon packing for secondary manual valve seal Durable all brass construction for maximum weather and spark resistance ASME Tank Filler Valves sales@mtankco.com

150 DOMESTIC TANK VALVES & ACCESSORIES ASME/ DOT Container Service Valves ME9101D-11.7 Description Dip Tube Length ME9101C1 3/4 MNPT X F. POL ASME/ DOT Service Valve (No Dip Tube) ME9101D /4 MNPT X F. POL ASME/ DOT Service Valve (with Dip Tube) 11.1 ME9101D /4 MNPT X F. POL ASME/ DOT Service Valve (with Dip Tube) 11.7 ASME/ DOT Container Service Valves are for use in vapor withdrawal service for ASME and DOT containers or as fuel line shutoff valves. NOTE: These valves do not have an integral pressure relief valve. Use them with containers that have a separate stand alone pressure relief valve sized to properly handle the container s capacity. FEATURES: One piece forged brass body construction Dual O-ring packing design Easy to repair/replace bonnet assembly Universal bonnet assembly Industry best fill flow rate Factory applied thread sealant Heavy duty replaceable zinc hand wheel ME9101C1 Double Check Fill Valves J ME601-6 ME Description 1-3/4 M. Acme x 3/4 MNPT Double Fill Valve w/cap and Lanyard 1-3/4 M. Acme x 1-1/4 MNPT Double Fill Valve w/cap and Lanyard Flow Rate LPG Accessories 10 PSI 20 PSI Cap and Lanyard ME ME ME601-6 Double Check Fill Valves are designed for DOT forklift, engine fuel and ASME residential tanks, these double check filler valves automatically open with pump pressure providing maximum product flow rates. Once flow ceases, both upper and lower check mechanisms close to prevent product loss from the container. The lower check serves as a secondary seat to limit product loss in the event that the primary upper seat fails to operate properly due to damage. FEATURES: Industry best flow rate Resilient bonded main valve seal Field repairable upper check seat Integral break away feature leaves primary check intact in the event of truck roll away Factory applied thread sealant ME LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 145

151 DOMESTIC TANK VALVES & ACCESSORIES Multi-Service Valve CAVAGNA GROUP Propane Liquid Capacity at Various Pressure Relief Valve Tank Filler Differential Pressure (GPM) Flow Capacity (SCFM) Air Vapor Service Fixed Liquid DT Connection Connection Connection Level Gauge Length PRV MNPT ACME PSIG PSIG PSIG PSIG Setting UL /4 POL (CGA 510) 1-3/4 Not Captive /4 POL (CGA 510) 1-3/4 Not Captive /4 POL (CGA 510) 1-3/4 Not Captive /4 POL (CGA 510) 1-3/4 Not Captive /4 POL (CGA 510) 1-3/4 Not Captive /4 POL (CGA 510) 1-3/4 Not Captive These Multi-Service Valves are multi-purpose and are suitable for lb. DOT containers. The can also be used for a 60 gallon tank. They are ideal for on site filling of DOT cylinder up to 200 lb. LPG capacity without interrupting service. FEATURES: Includes a service valve, back check filler valve, fixed maximum liquid level gauge (specify DT length when ordering) New high discharge flow capacity pressure relief valve (1123 UL listing) Reduced filler valve chamber reduces the waste of LPG during filling operation Increased high filling capacity Double O-ring replaceable stem Multivalve CAVAGNA GROUP Tank Vapor Service Filler Fixed Liquid DT PRV Connection Connection Connection Level Gauge Length Setting NPT POL (CGA 510) 1-3/4 ACME Not Captive PSIG DJ The 420 Multivalve is a multi purpose valve with double back check filler valve designed for use with 420 Ib. DOT containers. FEATURES: Includes a service valve, back check filler valve, fixed maximum liquid level gauge (specify DT length when ordering) Increased high filling capacity Reduced filler valve chamber reduces the waste of LPG during filling operation Double O-ring replaceable stem sales@mtankco.com

152 DOMESTIC TANK VALVES & ACCESSORIES Underground Multi-Service Valve CAVAGNA GROUP Propane Liquid Capacity at Various Pressure Relief Valve Tank Filler Differential Pressure (GPM) Flow Capacity (SCFM) Air Vapor Service DT Connection Connection Connection Length PRV MNPT ACME PSIG PSIG PSIG PSIG Setting UL ASME /2 POL (CGA 510) 1-3/ The Underground Multi-Service Valve with Integrated Evacuation Valve is designed for use in a single opening ASME container with a riser of 2-1/2 MNPT. A separate opening is NOT required for a liquid withdrawal valve. Internal threads accommodate 2-1/2 MNPT riser pipe connection and a 3/4 FNPT connection for the filling valve opening FEATURES: Double back check filler valve Vapor equalizing valve with excess flow Pressure relief valve with protective cap Service valve with Cavagna quality handwheel system Plugged 1/4 FNPT gauge boss Fixed liquid level gauge with 36 DT Junior size float gauge flange opening Double O-ring service valve; individual replacement system Underground Multi-Service Valve CAVAGNA GROUP Propane Liquid Capacity at Various Pressure Relief Valve Tank Filler Differential Pressure (GPM) Flow Capacity (SCFM) Air Vapor Service DT Connection Connection Connection Length PRV MNPT ACME PSIG PSIG PSIG PSIG Setting UL ASME /2 POL (CGA 510) 1-3/ J The Underground Multi-Service Valve with Integrated Evacuation Valve is designed for use in a single opening ASME container with a riser of 2-1/2 MNPT. A separate opening is NOT required for a liquid withdrawal valve. Internal threads accommodate 2-1/2 MNPT riser pipe connection and a 3/4 FNPT connection for the filling valve opening. Integrated liquid withdrawal valve in the body of the multi-service valve provides easy access. FEATURES: Double back check filler valve Vapor equalizing valve with excess flow Service valve with Cavagna quality handwheel system Pressure relief valve with protective cap Plugged 1/4 FNPT gauge boss Fixed liquid level gauge with 36 DT LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 147

153 DOMESTIC TANK VALVES & ACCESSORIES Multi-Service Valve CAVAGNA GROUP Tank Vapor Service Vapor Line Gauge Fixed Liquid Fixed Level Gauge Wrench Connection Connection Connection Boss Level Gauge DT Length Hex Flat /4 MNPT Female POL CGA /4 M.ACME 1/4 FNPT Yes 12 1 Multi-Service Valves are suitable for ASME tanks where a vapor service valve is required. This valve has in the same body a service valve, a vapor withdrawal valve and a fixed level gauge. FEATURES: Improved stem seal Redesigned Body Configuration Convenient Level Gauge Gauge connection can be plugged or left unplugged for installation of a pressure gauge Ever-Seal is pre-applied on the inlet thread Filler Valves & CAVAGNA GROUP Container Line Wrench Propane Liquid Capacity at Various Differential Pressure (GPM) Connection Connection Hex Flat 10 PSIG 20 PSIG 25 PSIG 30 PSIG 40 PSIG 50 PSIG 75 PSIG /4 MNPT 1-3/4 M.ACME 1-3/ /4 MNPT 1-3/4 M.ACME 1-3/ * 1-1/4 MNPT 1-3/4 M.ACME 1-3/ *Has a two-piece body Filler Valves & CAVAGNA GROUP DJ Tank Filler Wrench Propane Liquid Capacity at Various Differential Pressure (GPM) Connection Connection Hex Flat 10 PSIG 20 PSIG 25 PSIG 30 PSIG 40 PSIG 50 PSIG 75 PSIG /4 NPT 1-3/4 6 ACME Es. 46 mm /4 NPT 1-3/4 6 ACME Es. 46 mm FEATURES: Double back-check filler valve with integral emergency shut-off ball valve Soft seated upper back check Metal-to-metal lower back check seat No need for filler hose adapter Safe filler valve maintenance without tank evacuation For use under or above ground sales@mtankco.com

154 DOMESTIC TANK VALVES & ACCESSORIES Vapor Equalization Valve CAVAGNA GROUP Tank Connection Filler Connection Wrench Hex Flat /4 MNPT 1-1/4 5 ACME Es. 32 mm The Vapor Equalization Valve is an upper back check valve and lower excess flow valve combined. Filler Valves with Overfill Prevention Device CAVAGNA GROUP Tank Connection Filler Connection Wrench Hex Flat /4 NPT 1-3/4 ACME 1-3/ /4 NPT 1-3/4 ACME 1-3/ /4 NPT 1/2 SAE 11/ /4 NPT 1/2 SAE 11/16 The , , and are filler valves fitted with an OPD device are suitable for direct filling automotive applications. These valves incorporate a standard 1-1/4 flat wrenching hex allowing easy installation from the top with a socket wrench NOTE: When ordering it is necessary to specify tank dimension, mount angle, and diameter to determine correct part number : Filler valve for vertical ASME and DOT containers. Suitable for a 300 liter horizontal tank or 119VG tank. They can be fitted to other tank sizes upon request : Filler valve with OPD for Automotive Application and : Remote Filler valve with OPD for Automotive Application. J Filler Valves with Overfill Prevention Device CAVAGNA GROUP Tank Connection Filler Connection Wrench Hex Flat /4 NPT 1-3/4 ACME 1-3/ /4 NPT 1-3/4 ACME 1-3/ /4 NPT 1-3/4 ACME 1-3/4 The , , and are designed for horizontal and vertical LPG containers. All the valves are equipped with an overfill prevention device. Always specify type of tank (horizontal or vertical), diameter of the tank and location of the filler valve in the flange of the tank : Suitable for underground tank. The extended body allows an easier refilling operation : Filler valve with high flow capacity suitable for above ground containers. Specify tank size when ordering : As with other valves that incorporate an OPD, this valve has, in addition, an extended filler valve with ball shut-off valve manually operated. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 149

155 DOMESTIC TANK VALVES & ACCESSORIES Tank Equipment Spare Parts - Rain Caps Spare Part For Valve , , , , , , , , , , , Plastic CAVAGNA GROUP Plastic NOTE: Cavagna declines all responsibility for incorrect use or application. They recommend using original parts or to replace the whole valve. Plastic , , , Vinyl , , DJ Ug Wrench Kit & Valve Socket CAVAGNA GROUP C Description UG WRENCH KIT - Valve Socket - 3/4 Drive, Fits Cavagna Multiservice Valves for Asme Underground Propane Tank Valve Socket - 1/2 Drive, Fits Cavagna OPD Service Valves and Fork Lift Service Valves 51C Valve Socket UG Wrench Kit sales@mtankco.com

156 DOMESTIC TANK VALVES & ACCESSORIES PVE1876 Vapor Return Valve SHERWOOD LGP PRODUCTS Container Connection Filler Connection 100 PSIG PVE NPT ACME LPG Flow is 3100 CFH (Vertical), 2970 CFH (Horizontal) PVE1876 FEATURES: Has upper positive back check valve and lower excess flow valve Replacement kit available ( KIT) Attachment of the vapor hose coupling with its projecting nozzle opens the back check valve to permit flow in both directions Liquid Withdrawal Valves for ASME Bulk Tanks SHERWOOD LGP PRODUCTS Inlet Outlet Flow at 10 PSIG Excess Excess Flow - Approx. NGT FNPT Differential GPM Flow Valve Closing Flow GPM/LPG PV No PV2341A No PV2341X Yes 19.5 PV2341AX Yes 19.5 PV2341BX PV2341 Series PA5138 Adapter The PV2341 Series are primarily designed to withdraw liquid LPG from a stationary tank during an emergency or when relocation of the tank is necessary. The withdrawal valves incorporate an O-ring seal on the lower stem assembly, a back seat feature, and swivel seat construction for durability. The side outlet boss is tapped 1 4 FNPT and plugged. All tanks using a PV2341 Series transfer valve must be pre-fitted with a Sherwood Checkmate liquid excess flow valve. The PV2341 valve, when used with the newer style adapter PA5138 and Checkmate valves PVE5136 or PVE5137, is designed for permanent installation. The PVE valve, when used with the older style adapter PA5133 and Checkmate valves PVE5133S or PV5135S, is not recommended for permanent installation. All PV2341 Series valves are available with integral excess flow valves. Contact your MTankCo sales representative to find out which replacement parts/kits are compatible with your valves ( KIT or KIT). J Liquid Withdrawal Valves - Checkmate Series SHERWOOD LGP PRODUCTS Inlet Outlet Excess Excess Flow - Approx. NGT FNPT Flow Valve Closing Flow GPM/LPG PVE UN-2A Yes 22 PVE UN-2A Yes 30 PA UN Adapter PVE5136 CHECKMATE ADAPTER PA5138 FEATURES: Use with PVE2341 Series transfer valves and PA5138 adapter to evacuate liquid LPG from stationary bulk tanks Can be installed directly into any liquid withdrawal outlet location (top, end, or bottom of tank) Uses an excess flow valve with a soft rubber seat to minimize leakage when the cap is removed Designed for permanent installation when used with PVE5136 or PVE5137 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 151

157 CHECKMATE ACTIVATED LIQUID WITHDRAWAL EXCESS FLOW VALVE PVE5136 FEATURES: DOMESTIC TANK VALVES & ACCESSORIES 3 4 inlet UN-2A outlet Meets UL 125 Standard Designed for permanent installation when used with PVE5136 or PVE5137 Use with PA5138 adapter Approximate closing flow of the excess flow valve is 22 GPM liquid LPG Designed for permanent installation when used with PVE5138 PVE5136 CHECKMATE ACTIVATED LIQUID WITHDRAWAL EXCESS FLOW VALVE PVE5137 FEATURES: inlet UN-2A outlet Leak-free connection Use with PA5138 adapter Approximate closing flow of the excess flow valve is 30 GPM liquid LPG Designed for permanent installation when used with PA5138 PVE5137 Cluster Valves for ASME Underground Propane Tanks SHERWOOD LGP PRODUCTS Container Connection FNPT Service Connection Filler Connection ACME Pressure UL Listed Connection Baffle Pipe Dip Tube Relief Relief ASME Size Connection Length Valve Valve Listed Setting Capacity PV2098AT POL (CGA 510) 1, sq. ft. 2-1/2 1-3/ ACME 3 4 FNPT 30 * 250 PSIG PV2098PT** NGO LH SCFM/Air Underground * Dip tube not installed; may be cut by customer to desired length ** Includes 5136 liquid withdrawal valve These Cluster Valves are multi-purpose and designed for use on domestic ASME underground tanks that require a single opening except for a separate opening for liquid withdrawal. FEATURES: Combines standard Sherwood components into a compact and convenient system Replaceable valves enable retrofitting without replacing the complete unit Include a double back-check filler valve suitable for all filling requirements Vapor return valve is designed to satisfy the demand required by the system during the filling operation Service valve offers Dual Bonnet feature Gauge flange junior size configuration will accommodate a combination of gauges Gauge boss provided (contains a 1 4 NPT plug) Protective closures are provided for filler valve, vapor return valve, and pressure relief valve Economical coated ductile iron head with wrench floats 30 dip tube provided but not installed (customer may trim to desired length) ASME certified PSIG UL Listed closing flow Gauge flange opening fits Junior size 3 4 FNPT baffle pipe connection Cluster Valve DJ sales@mtankco.com

158 CYLINDERS Cylinders MANCHESTER J 5 lb. Cylinder 11 lb. Cylinder 20 lb. Cylinder Size/Pounds Service Material Valve CY414OPD 4-1/2 Vapor Steel OPD CY5OPD 5 Vapor Steel OPD CYAL6 6 Vapor Aluminum OPD CY10OPD 10-Tall Vapor Steel OPD CY11OPD 11-Short Vapor Steel OPD CY15MC 15 Vapor Steel Mower Cylinder LH Connector, Acme Fill, No Gauge CY20OPD 20 Vapor Steel OPD CY20SFG 20 Vapor Steel OPD and Sureflame Gauge CY20PL 20 Vapor Steel With Plumbers Pot Valve, OPD CYFL20 20 Liquid Steel Forklift w/coupler and Gauge CY20HOR 20 Vapor Steel Horizontal w/gauge OPD CY20BUF 20 Vapor Steel Verticle for Buffer Forklift w/coupler and Gauge CYAL20BUF 20 Vapor Alum. Buffer Verticle Only Forklift w/coupler and Gauge CY30OPD 30 Vapor Steel OPD CY30HOR 30 Vapor Steel Horizontal w/gauge OPD CY Liquid Steel Forklift w/coupler and Gauge CYAL Liquid Aluminum Forklift w/coupler and Gauge CYAL33.5FV 33.5 Liquid Aluminum Forklift w/coupler, Fill Valve and Gauge CYAL33.5MC 33.5 Vapor Aluminum Mower Cylinder LH Connector, Acme Fill, Gauge CY40OPD 40 Vapor Steel OPD CYAL40OPD 40 Vapor Aluminum OPD CY Liquid Steel Forklift w/coupler CYAL Liquid Aluminum Forklift w/coupler and Gauge CY50 50 Vapor Steel POL CY60 60 Vapor Steel POL CY Vapor Steel POL CY100L 100 Liquid Steel CGA555 Hopane CY100ASME 100 Vapor Steel POL and Gauge CY200DOT 200 Vapor Steel POL and Gauge CY200ASME 200 Vapor Steel POL and Gauge CY420DOT 420 Vapor Steel Multi-Valve Tankfoot tank stablizer part number A91725 is available to assist the consumer in transporting 20, 30 and 40 pound cylinders. 100 lb. Cylinder 420 lb. Cylinder LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 153

159 CYLINDERS 1 Pound Refillable Propane Tanks FLAME KING Size/Pounds Description FLMKNG164LP 16.4 oz. Refillable Camping Tank 1 lb. FLMKNG141LP 14.1 oz. Industrial Camping Tank YSNEZF E-Z Fill 1 lb. Refill Valve for Forklift Tank Portable Cylinders FLAME KING Size/Pounds Tank Type Valve YSN lb. YSN lb. YSN lb. BBQ Propane OPD and/or POL Valve Assembly YSN lb. BBQ/Home Heating 20 lb. Cylinder 30 lb. Cylinder 40 lb. Cylinder 100 lb. Cylinder Buffer Tanks FLAME KING Size/Pounds Description YSN201BT 20 lb. For Floor Burnishers, Vapor Draw, QuickFill valve, NO OPD Forklift Tanks FLAME KING DJ Size/Pounds Description YSN lb. Steel Forklift Tank ASME Vapor Draw Fuel Tanks FLAME KING Size/Gallons Description YSN ASME Vapor Draw Fuel Tanks YSN Horizontal Mount with Brackets YSN sales@mtankco.com

160 CYLINDER VALVES Forklift Cylinder & Engine Fuel Valves Description Excess Flow GPM ME9101P5 3/4 MNPT X 3/8 MNPT Forklift Service Valve 1.6 GPM ME9101P5H 3/4 MNPT X 3/8 MNPT Forklift Service Valve 2.6 GPM ME9101H4 3/4 MNPT X 3/8 M. Flare Motor Fuel Service Valve 1.6 GPM ME9101H6 3/4 MNPT X 3/8 M. Flare Motor Fuel Service Valve 2.6 GPM ME9101C5 3/4 MNPT X F. POL ASME/ DOT Container Service Valve 2.6 GPM These Cylinder Valves are intended for vapor or liquid withdrawal service on DOT forklift or engine fuel containers. Two closing flow rates are offered GPM for medium to light duty vehicles and 2.6 GPM for those with greater fuel demands. ME9101P5H NOTE: These valves do not incorporate an integral pressure relief valve and are intended for use in containers that have a separate pressure relief valve to adequately handle the container s capacity. Each of these valves incorporate an excess flow valve at the tanks inlet end to prevent excessive product loss in the event of a downstream fuel line failure. For the excess flow device to perform properly the service valve must be in the full open and back seated position. FEATURES: One piece forged brass body construction Dual O-ring packing design Easy to repair/replace bonnet assembly Universal bonnet assembly Industry best fill flow rate Factory applied thread sealant Replaceable, heavy duty zinc hand wheel featuring a universal design Engine Fuel Remote Fill Valve J Description Accessories Cap & Lanyard ME /4 M. Acme x 1/2 M. Flare Remote Fill Valve w/cap and Lanyard ME Engine Fuel Remote Fill Valves are specifically designed for remote filling applications where a standard tank type filler valve is not practical. Perfectly suited for motor fuel applications or other hard to reach remote tank applications. This single check fill valve is designed to provide maximum product fill rates along with an automatic shutoff once product flow ceases. ME602-8 FEATURES: Single check design allows maximum product flow rate Integral break away feature leaves check valve intact in the event of a vehicle roll away during filling Resilient bonded main valve seal Rear bulkhead mounting with quarter panel jam nut and lock washer Single piece main valve body for maximum strength and durability LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 155

161 CYLINDER VALVES Service Valves for DOT Fork Lift & ASME Motor Fuel Containers CAVAGNA GROUP Container Connection Outlet Connection Normal Application Excess Flow Closing /8 SAE Flare (70) ASME Motor Fuel 3.3 GPM /8 SAE Flare (90) ASME Motor Fuel 3.3 GPM 3/4 M.NGT POL (CGA 510) ASME Motor Fuel 1.5 GPM /8 18 NPT DOT Fork Lift 2.6 GPM /4-14 NPT 5/8 UNF RV - Automotive 1.4 GPM These Service Valves are designed for vapor or liquid withdrawal service on DOT fork lift truck containers ( ) and ASME containers. All these valves are equipped with an excess flow limiter with different settings. Since these valves do not have an integrated pressure relief valve, they may only be used as an accessory valve on containers that have an independent PRV suitable for that container s capacity. All these valves are supplied with pre-applied sealant on the inlets. The has also pre-applied sealant on the outlet. Two O-rings form the stem seal for improved resistance to leakage due to dirt or temperature extremes. FEATURES: Tamper proof design Sturdy quality handwheel brass handle Static seat disc eliminates abrasive wear on the disc improving service life Recessed excess flow valve reduces the possibility of mechanical damage or fouling from excess pipe compound DJ Fork Lift DOT Multivalve CAVAGNA GROUP Inlet Outlet Application M 34 3/8-18 NPT Dot Fork Lift Cavagna Group s is designed specifically as a One-Hole solution for composite LPG cylinders in DOT fork lift truck service. This One-Hole solution has fewer points for potential leaks. This valve has multi-functions acting as a PRD and Excess Flow Valve. Its straight threads reduce torque force into the composite cylinder wall sales@mtankco.com

162 CYLINDER VALVES Liquid Withdrawal Valves with Excess Flow CAVAGNA GROUP Container Outlet U.L. Closing Flow Wrench Connection Connection (Propane) Hex Flat /4 MNPT 5/8 FNPT 20 GPM 1-15/ /8 UNF 3/4 UNF /4 NPT 3/4 NPT 1-3/4 Withdrawal Valve is designed to liquid evacuation prior to moving the tank. This valve can also be used on permanent installations equipped with an excess flow limiter. Designed according to the latest UL standard. Withdrawal Valve performs as an excess flow valve Adapter is to be used with a liquid withdrawal valve. It is fully compatible with the new evacuation valves on the market J Service Valves for ASME, DOT Containers, & Fuel Line Application CAVAGNA GROUP Tank Vapor Service Fixed Liquid Fixed Level Connection Connection Level Gauge Gauge DT Length Not captive /4 NGT POL CGA Not captive Service Valve was created especially for vapor withdrawal service on ASME and DOT containers. Since this valve has no integral pressure relief valve, it may only be used as an accessory valve on containers that have an independent pressure relief valve sufficient for that container s capacity. This valve can also be used as a service valve on a 420 lb. vertical tank or a 300 liter horizontal tank. This valve also incorporates a fixed liquid level gauge. Specify DT length when ordering. Valve is an open-close valve with POL outlet and is designed for vapor withdrawal only. FEATURES: Double O-ring stem seal Sturdy quality handwheel brass handle Static seat disc eliminates abrasive wear on the disc improving service life LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 157

163 CYLINDER VALVES Service Valves for DOT Cylinders CAVAGNA GROUP Cylinder Outlet Normal Liquid DT Relief UL Rated Discharge Connection Connection Application Level Gauge Length Setting Flow Capacity (SCFM) Female DOT cylinder up to 100 lb. Yes /4 NGT POL Service valve on DOT cylinder Yes (CGA 510) DOT cylinder up to 100 lb. No 765 Service Valve is a DOT cylinder valve for vapor withdrawal up to 100 lb. LPG capacity. Specify dip-tube length when ordering. Service Valve is a heavy duty POL valve with pressure relief valve for 200 lb. propane cylinders. Different DT length Type 1 Acme Cylinder Valve with Overfill Prevention Device (OPD) CAVAGNA GROUP Cylinder Container Outlet Relief Dip Capacity Connection Connection Setting Tube lb lb. 3/4 14 NGT Type 1 ACME and POL 375 PSIG lb. 6.4 Type 1 Acme Cylinder Valves are intended for DOT cylinders up to 40 pounds LPG capacity (96 pounds water capacity). This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). FEATURES: Rapidly purges and fills; over one million BTU withdrawal capacity Tri-lobular one-piece forged aluminum handwheel Leak resistance double O-ring stem seal Pre-applied Ever-Seal sealant O-ring check valve seat opens only with positive seal Upward spray filling eliminates premature shutoffs Steel safety cage surrounding critical welds provides additional protection to components DJ LPG Valve Type 1 Overfill Prevention Device sales@mtankco.com

164 CYLINDER VALVES DOT Cylinder Valves for Vapor Withdrawal SHERWOOD LPG PRODUCTS Container Connection Service Connection Fixed Max. Valves Pressure Liquid Level Start-to-Discharge Excess Gauge Setting (PSIG) Flow Repair Kit PVE3250-C-375 No 375 PVE3250CLG Yes LH-KIT PVE3250ALG7T* POL(CGA510) Yes 375* No NGT PVE3250ADT-7* No 375* PVE3250BC-312 No LH-KIT PVE3250CLM-375 Male CGA555 Yes Yes PVE3329BDBT No KIT PVE3329BT POL(CGA510) No 375* LH-KIT NGT No PVE3329BDBLGT-X.X Male Yes KIT PVE3329BLGT-X.X Yes * Use where separate pressure relief device is provided. PV3250C-375 Valve is a integral relief device designed for cylinders rated at 240 PSIG. PV3250CLG Valve has the same features as the PV3250C-375 Valve but includes a fixed maximum liquid level gauge. PVE3250ALG7T Valve is a fixed maximum liquid level gauge designed for use where a separate pressure relief device is provided (for example, on a multiport 420 lb. cylinder). PVE3250AD-7 Valve is designed to be used where a separate pressure relief device is provided (for example, on a multiport 420 lb. cylinder). PVE3250BC-312 Valve is the replacement valve for small ASME engine fuel tanks with 20 sq. ft. or less in surface area. J PVE3250CLM-375 Valve is to be used in 100 lb. capacity cylinders where liquid withdrawal is required. Its fixed maximum liquid level gauge has a 11.6 dip tube for 100 lb. cylinder. The pressure relief device is set to relieve at 375 PSIG. Integral excess flow check valve closing flow liquid 1 GPM of LPG. Inlet is NGT and outlet is LH; male CGA 555. PVE3329BDBT and PVE3329BT Valves should be used where a separate pressure relief device is provided for ASME tanks or DOT cylinders. This valve has a dual bonnet with a plugged 1/8 FNPT tapped side boss. PVE3329BDBLGT-X.X Valve is to be used where a separate pressure-relief device is provided for ASME tanks or DOT cylinders. This valve has a dual bonnet with a 1 8 FNPT tapped side boss, plugged. This valve includes a fixed maximum liquid level gauge. PVE3329BLGT-X.X Valve is to be used where a separate pressure-relief device is provided for ASME tanks or DOT cylinders and includes a fixed maximum liquid level gauge. Its side boss is tapped 1 8 FNPT and plugged. PVE3329BLGT PVE3250CLG LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 159

165 CYLINDER VALVES PVE3250-C-375 PVE3250ADT-7* PVE3250BC-312 PVE3329BT Service Valves PVE1447 Series SHERWOOD LPG PRODUCTS Container Service Connection Connection (GPM) Kit Ecess Bonnet Handwheel Repair Handwheel Flow Assembly Screw Kit PVE1447B LH-KIT 1901S J12-F10-85AP L-KIT PVE1447C LH-65-KIT SAE PVE1447D 3250D-8LH-KIT 1901S J12-F10-85AP 3250D-8LH-KIT PVE1427B 3250D-8LH-KIT 1901S J12-F10-85AP 1.7 PVE1427CV NGT LH-65-KIT ? 3 8 NPT PVE LH-65-KIT ? PVE1449V LH-65-KIT ? PVE1447DMF 3 8 SAE D-8LH-KIT 1901S J12-F10-85AP 3250D-8LH-KIT PVE1427C 3 8 NPT LH-65-KIT ? Service Valves with Hydrostatic Relief recognize a pressure increase in the downstream line of approximately 25 to 50 PSIG differential. The LPG flows back into the tank and not into the atmosphere. These valves eliminate the need for an external hydrostatic relief valve between shutoff valves that could vent to the atmosphere therefore, connections are eliminated, reducing the number of potential leak points. PVE1447 Series ASME Service Valves for Engine Fuel Application FEATURES (PVE1447B and PVE1447C): Integral excess flow check at inlet Flow rated at 1.7 or 2.3 GPM LPG (approx.) For liquid or vapor withdrawal from engine fuel containers with a separate relief valve PVE1447B - standard full size straight 3 8 SAE flare outlet service valve PVE1447C - low profile; compact for easy installation PVE1447B DJ PVE1447 Series with Hydrostatic Relief for Engine Fuel Application FEATURES (PVE1447B, PVE1447CAH, and PVE1447DMF): Incorporates all features of the PVE1447 Series, plus internal hydrostatic relief, which vents trapped liquid with excessive line pressure back to the tank PVE1447D - standard full size straight 3 8 SAE flare outlet service valve PVE1447CAH - Canadian Standards Association (CSA) Certified low profile for easy installation PV1447DMF - angled 3 8 SAE flare outlet; uses shorter couplings and lower hoods; permits easy connection of flare nuts Eliminates the need for an external hydrostatic relief valve for liquid lines where liquid can be trapped between two shutoffs To ensure proper functioning of the excess flow feature, these valves should be fully open and backseated when in use PVE1447D sales@mtankco.com

166 CYLINDER VALVES Service Valves PVE1447 Series (continued) SHERWOOD LPG PRODUCTS Internal Excess Flow Valves are designed for both ASME engine fuel applications (PVE1447 Series) and DOT fork lift truck applications (PVE1427 and PVE1449 Series). Because Sherwood s excess flow device is internal to the valve body, it is unaffected by internal variations in cylinder construction, which can contribute to premature shutoff. These valves are designed with a low-pressure differential shutoff rated at 1.7 GPM. PVE1447DMF Angled SAE Outlet PVE1427 Series DOT Cylinder Service Valves for Fork Lift FEATURES (PVE1427B, PVE1449, and PVE1427C): Integral excess flow check at inlet Flow rated at approximately 1.7 GPM LPG For vapor or liquid withdrawal from fork lift truck containers PVE1427B - standard full size straight 3 8 NPT outlet service valve PVE smaller body and bonnet assembly, smaller diameter handwheel, and lower profile than the PVE1427B and PVE1427C valves PVE1427C - small body and bonnet assembly PVE1427B LH-KIT PVE1449 J LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 161

167 CYLINDER VALVES ACCESSORIES Cylinder Collars Size *Multi-Valve ME312-5MV 3-1/8 Yes ME /2 No ME350MV 3-1/2 Yes * Multi-valve style features cut-out in thread to provide clearance for assembly over container valve Steel propane cylinder collars are designed to protect the valve installed on a cylinder. An automotive grade powder coat finish provides maximum corrosion resistance. WARNING: It is illegal to fill a tank without a protective collar. Without a protective collar serious damage can occur to the cylinder valve which can lead to catastrophic events such as the tank becoming a dangerous projectile, an explosion and/or fire causing property damage, or personal injury or death. ME350 ME350MV Cylinder Valve Wrenches Thread Style MEP121 Male POL POL MEP /16 Female Acme Type I (QCC)/ OPD Designed to remove or install Type I (QCC)/OPD cylinder valves or POL service valves without damage to the valve base. MEP121 DJ MEP122 sales@mtankco.com

168 SAFETY EQUIPMENT Decals & Signs AA16/AA16 ROLL 2N1 Description A16 Custom Imprinted DOT Cylinder Labels Minimum Order 3500 AA16 DOT Cylinder Labels - Minimum Order 100 AA16ROLL DOT Cylinder Labels 500 Per Roll 2N1 For All Portable Cylinders Per Roll DOT 1075 / Warning ANSI / MFPA Pamphlet 58 V56R 3 in 1 Hazardous Material Label, 10 x 3-1/2 SP53R Warning Label, 3 Valves Black on Yellow P-101 Water Capacity Chart P102 Notice for Your Safety P-206 Cylinder Filling Instructions (ASME/DOT) - Poly V206 Cylinder Filling Instructions (ASME/DOT) - Vinyl V14 Cylinder Exchange Check List - Vinyl C37 Cylinder Exchange Check List - Coroplast P111 OPD Sign - Does your valve look like this P-114 OPD Retrofit Guide PMICH No Smoking - No Open Flame.. Warning: Filling the following V128 This Container is NOT Equipped with an OPD (For Horizontal Cylinders) RIN LABEL RIN DOT Cylinder Decal Label 50 Per Roll CUSTOM RIN RIN DOT Cylinder Decal Label 500 Per Roll SP53R C37 P102 K V56R P-206/V206 P114 P-101 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 163

169 SAFETY EQUIPMENT Decals & Signs Description M1075 Magnetic Diamond Placard LPG P1075 Plastic Placard Diamond LPG, Works with MPH69 Holder S1075 Scotchlite Reflective 1075 Decals V1075 Vinyl Placard Diamond Decal LPG MPH69 Placard Holder CG126FO Flip Placard Assembly Metal Frame 81-CLIP Stainless Steel Clip for CG126FO Metal Placard V83 Shipping Paper One Truck V83-CYL Shipping Paper for Cylinder Truck V83-TANK Shipping Paper One Storage Tank VDOT Operating Under 49 CFR White on Black Decal S22B 4 x 36 We Stop at all Railroad (RR) Crossings Decal S22C 8 x 12 We Stop at all Railroad (RR) Crossings Decal S500 3 x 5 Black Diamond PROPANE Decal HZ116 OSHA Commercial Cylinder Decal PROPANE SMV7 Slow Moving Vehicle Decal V92 Liquid/Clutch/PTO/Bypass Decal V8 Vapor/Relief/Liquid Decal V45 Valve ID Label Set 10 x 10 Decal V65 QT Decal V66 NQT Decal V31 HM-183 Annual Inspection Decal Kit V32 HM Yr. Inspection Decal Kit V33 Number Sheet Only for V31 and V32 Decal V90-5 Liquid Five Per Sheet 1 x 4 Decal V91-5 Vapor Five Per Sheet 1 x 4 Vinyl Decal V58C LPG Octane Label 2-1/2 x 3 Decal V75-20 Container Shutoff Decal V75-20 Tag Container Shut Off Warning Tag S500 M1075, P1075, S1075, V1075 SMV7 CG126FO V90-5 V91-5 V92 MPH69 V83-CYL NO OF CYLINDERS V-83 ONE TRUCK LOAD V83-TANK ONE STORAGE TANK HZ116 V45 K V32 V65 V66 S22B V8 V31 S22C sales@mtankco.com

170 SAFETY EQUIPMENT Decals & Signs V24A / V24BB / V24C V17B / V17C V28A / V28B / V28BB / V28C V288BB V23A / V23BB / V23B M23BB / V23C Description M97A 2 x 4 Aluminum Single Faced PROPANE FILLING STATION M97AD 2 x 4 Aluminum Double Faced PROPANE FILLING STATION M97AX 2 x 4 Aluminum Single Faced PROPANE CYLINDERS EXCHANGED M97AXD 2 x 4 Aluminum Double Faced PROPANE CYLINDERS EXCHANGED M97FR 2 x 4 Frame for Metal Signs V24A 6 Flammable Decal V24BB 3 Flammable Decal V24C 2 Flammable Decal V17B 4 Flammable Gas Vinyl Decal V17C 2 Flammable Gas Vinyl Decal V52 11 Flammable Gas Diamond Decal Red with White Letters, Class 2 V52S 4 Flammable Gas Diamond Decal Red with White Letters, Class 2 V28A Propane 6 Letters Decal V28B Propane 4 Letters Decal V28BB Propane 3 Letters Decal V28C Propane 2 Letters Decal V288BB Propane Gas 3 Letters Decal V39B 12 x 18 No Smoking or Open Flames 25 Decal M39B 12 x 18 Metal No Smoking Within 25 ft. V26A 12 x 18 No Smoking/Shut Off Motor Decal V23A 6 No Smoking Decal V23BB 3 No Smoking Decal V23B 4 No Smoking Decal M23BB 3 No Smoking on Metal V23C 2 No Smoking Decal V21 Concerned for Your Safety Cylinder Filling Decal V121 Port Cylinder Fill Instructions Decal P13 Emergency Contact # s 18 x 24 M97A M97AD M97AX M97AXD V52 K V39B/M39B V21 C37 V26A LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 165

171 SAFETY EQUIPMENT Decals & Signs Description P148 Plastic Sign Liquid Valve Emergency Shut Off Pull to Close 10 x 12 P149 Plastic Sign Liquid Valve Emergency Shut Off Push to Close 10 x 12 V81 Vinyl Sign Emergency Shut Off Pull to Close 10 x 12 V126 Vinyl Decal Emergency Shut Off Pull to Close 5 X 6 V129 Vinyl Decal Emergency Shut Off Push to Close 5 x 6 V302BB 3 Liquid Petroleum Gas Vinyl Decal V302C 2 Liquid Petroleum Gas Vinyl Decal V2A 2 Anhydrous Ammonia Vinyl Decal V5 4 Anhydrous Ammonia (Straight) Decal V5A 4 Anhydrous Ammonia (Curved) Decal V2B 2 Vinyl Inhalation Hazard Decal V1005 NH 3 Placard Diamond Vinyl Decal Green Stick on Diamond 1005 V41 2 Liquified - Green Letters Decal OSHA Diamond 7-1/2 X 7-1/2 Propane Decal OSHA Diamond 15 X 15 Propane Decal V30 Tank Filling Instructions 15 X 22 Motor Fuel Decal 7282Q Methanol Warning Decal 3 x 5 V1203 UN 1203 Gasoline Diamond Decal Placard V50 3N1 DOT Decal for Ragasco Forklift Cylinder V81 / V126 V129 P148 P149 V5 V2A V50 V2B K V / V1005 V302BB / V302C sales@mtankco.com

172 SAFETY EQUIPMENT Pressure Gauge Snubbers ME202SS Material Style Inlet (MNPT) Outlet (FNPT) ME202 Brass #54 Orifice ME202SS Stainless Steel #54 Orifice 1/4 1/4 ME204 Brass Sintered Metal Filter Disc Snubbers are designed for a pressure gauge to be threaded into their outlet. The snubber will reduce pressure fluctuations that can over pressurize or damage the gauge while maintaining a quick response time and a steady reading. ME204 Low Temperature Leak Detector ME-LD02 Size Description ME-LD02 2 oz. Marshall Excelsior Leak Detector Spray Bottle ME-LD1 8 oz. Marshall Excelsior Leak Detector Cap and Dauber ME-LD16 16 oz. Marshall Excelsior Leak Detector Cap and Brush ME-LD2 1 gal. Marshall Excelsior Leak Detector WIN EMPTY 8OZ 8 oz. Sherlock 5-Second Leak Detector Cap and Dauber WIN EMPTY PT 16 oz. Sherlock 5-Second Leak Detector Spray Bottle WIN GALLON LD 1 gal. Sherlock 5-Second Leak Detector Low Temperature Leak Detector is for all pressurized gases and designed to detect joint leaks within 5 seconds of proper application at temperatures down to -40 F. ME-LD2 ME-LD16 Win Empty 16 oz. K Winton Gallon Winton Empty LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 167

173 SAFETY EQUIPMENT Hose Barbs Brass Steel* Four Barb Seven Barb Four Barb Four Low High with 3/64 Barb Pressure Pressure Orifice Hole Hose I.D. Threads ME4631 1/4 1/8 FNPT ME4632 ME5632 1/4 1/4 FNPT ME4633 ME5633 1/4 3/8 FNPT ME4652 3/8 1/4 FNPT ME4653 ME5653 3/8 3/8 FNPT ME4654 3/8 1/2 FNPT ME4231 ME5231 1/4 1/8 MNPT ME4232 ME5232 1/4 1/4 MNPT ME4233 ME5233 1/4 3/8 MNPT A6132 A6133 3/8 1/8 MNPT ME4252 A1132 A1133 3/8 1/4 MNPT ME4253 ME5253 3/8 3/8 MNPT ME4254 3/8 1/2 MNPT A6138 A6139 1/2 1/8 MNPT A1138 A1139 1/2 1/4 MNPT ME4273 1/2 3/8 MNPT ME4274 ME5274 1/2 1/2 MNPT ME4293 5/8 3/8 MNPT ME4835 ME5835 1/4 3/8 Male Flare ME4855 3/8 3/8 Male Flare ME4857 3/8 1/2 Male Flare ME5133 1/4 1/4 Male Inverted Flare ME4333 1/4 1/4 Female Flare Swivel ME5334 ME43352 ME5335 1/4 3/8 Female Flare Swivel ME4355 ME ME5355 3/8 3/8 Female Flare Swivel ME4357 ME5357 3/8 1/2 Female Flare Swivel ME43774 ME5377 1/2 1/2 Female Flare Swivel *Rated for LP-Gas and NH 3 2 ME (barb only); ME (nut only) 3 ME (barb only); ME (nut only) 4 ME (barb only); ME (nut only) 5 ME (barb only) 6 Forged Nut ME4652 ME5632 ME5233 ME4252 A1132 ME4835 ME5133 ME5335 Hose Ferrules & Hose Menders Hose Ferrules I.D. OAL ME ME ME ME ME Hose Ferrules I.D. OAL ME ME ME ME ME Hose Menders Hose I.D. ME27C 1/4 x 1/4 ME27E 3/8 x 3/8 K ME27C ME7327 ME27E sales@mtankco.com

174 SAFETY EQUIPMENT High Pressure Test Blocks Inlet Outlet PSIG Factory Installed Vent Valve MEJ600 Male Hard Nose POL Female POL No MEJ601 Male Hard Nose POL Female POL Yes MEJ601-WOG* Male Hard Nose POL Female POL Yes * Without gauge MEJ600 High Pressure Test Blocks test high pressure lines downstream of the container valve for system leaks. The optional bleeder valve enables the line pressure to be adjusted to the desired test pressure. MEJ601 Low Pressure Test Kits Kit with Case Gauge and Gauge and Gauge and Adjustable Manometer Hose Hose Barb 1/4 MNPT Gauge Adapter Only Connection Connection ME60P-2 ME60P-5 ME60-2 Yes ME1328 (3/8 OD) ME1331 (1/2 OD) ME50P-2 ME50P-5 ME50-2 ME No ME1332 (5/8 OD) ME50-2 Low Pressure Test Kits are used to check for gas leaks by verifying the line pressure of an appliance. Each kit includes a case, gauge, and rubber hose with a bell on the end. TEST KIT FEATURES: Capacity 0-35 water column Three foot rubber hose with bell Adjustable gauge models can be reset to zero with provided screwdriver K ME50P-5 ME50P-2 ME60P-2 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 169

175 SAFETY EQUIPMENT Low Pressure Adapters Connection Connection METL051 5/16-32 Male / 1/8 MNPT / 1/2 MNPT Standard test hose fitting/1/8 MNPT METL052 5/16-32 Male / 1/8 MNPT / 1/4 MNPT Standard test hose fitting/1/8 MNPT METL051 METL051 and METL052 Adapters eliminate the hassle of carrying numerous bushing and fittings to job sites. These adapters have three threads on one end with a hose barb and an 1/8 MNPT on the other end. A hose can easily be attached to either end and can be connected to a manometer or other flow meters to check line pressure on an appliance. ME1332 Low Pressure Test Block Inlet PSIG MEJ610/ MEJ610/ /4 FNPT MEJ610/ MEJ610/ Marshall s Test Blocks are designed to test low pressure lines for system leaks. The factory installed check valve allows the line to be pressurized and adjusted to the desired test pressure. MEJ610/30 Pressure Test Gauge Inlet Outlet PSIG Factory Installed Vent Valve MEJ602* MEJ603LP 1/4 MNPT 1/4 FNPT 0-15 Yes MEJ603HP * Without gauge FEATURES: Reliable method to test high and low pressure tap installations Provides an effective method to bleed vapor for pressure equalization and more accurate gauge readings Allows for an effective method to bleed vapor from the testing equipment prior to disconnect High quality liquid filled pressure gauge MEJ603HP K sales@mtankco.com

176 SAFETY EQUIPMENT Pressure Test Accessories ME295-1 MEJ595 Port Hole with With Without Connection Connection #54 Orifice Plug Plug ME295 ME295-1 Male Hard Nose POL Female POL 1/8 FNPT ME295SN ME295SN-1 Male Soft Nose POL Female POL 1/8 FNPT ME296 ME /4 MNPT 1/4 FNPT 1/8 FNPT ME297 ME /8 MNPT 3/8 FNPT 1/8 FNPT ME298 ME /2 MNPT 1/2 FNPT 1/8 FNPT MEJ595 1/2 MNPT 1/2 FNPT 1/4 FNPT (No Orifice) ME299 ME /4 MNPT 3/4 FNPT 1/8 FNPT Connection Connection Description MEJ604 1/4 FNPT 1/8 MNPT Extension ME296-1 Marshall s Accessories provide an inexpensive way to permanently install a pressure tap upstream or downstream from the first stage regulator. The #54 orifice port provides controlled line pressure for more accurate readings and protects test equipment from pressure spikes while allowing easy installation of pressure test monitoring devices. MEJ604 Pressure Test Accessories MEJ608B-02 Connection Connection Thread Sealant MEJ /4 MNPT No MEJ /8 MNPT 5/16-32 Male No MEJ608B-02 1/8 MNPT Yes Connection Connection ME10BTK /8 FNPT 5/16-32 Female K ME10BTK-1-01 MEJ608B-02 Check Valve allows the line to be pressurized and adjusted to the desired pressure through the same valve. NOTE: To help eliminate valve failure, the valve cap should remain on the valve when line is not being pressurized or adjusted. Any dirt, debris, water or other contaminants can potentially jam the valve or compromise the sealing surface causing the valve to leak. Pressure Test Flexible Rubber Pigtail (1/4 Hose ID) Connection Connection Thread Sealant MER /8 MNPT 1/4 FNPT MER Flexible Rubber Pigtails are for hard to reach places and intended for first stage regulators with pressure taps in either upstream or downstream positions. MER432 Series LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 171

177 SAFETY EQUIPMENT Dwyer U-Tube Manometer Description U-Tube Manometer A126 3/4 oz. Replacement Green Dye D Oil Filled U-Tube Manometer A101 3/4 oz. Red Gauge Oil A102 4 oz. Red Gauge Oil A201 3 Tubing with Replacement Bell End A319 Flexible Red PVC Connector for 1222 Manometer Dwyer U-Tube Manometer are to be attached to a vertical steel surface with magnets behind scale. If necessary, attach using screws and bolts. A hose included with the manometer Dwyer U-Tube Manometer Kit - Series 1211 Description 1212 Slack Tube Manometer A Case A126 3/4 oz. Green Replacement Dye A201 3 Tubing with Replacement Bell End 1D4976 Rubber Bell Adapter 1212 KIT Adapter Kit A339 Brass Adapter 1/8 MPT x 1/8 Barb FEATURES: 1211 Rubber tubing adapter to fit standard 7/16 diameter spud 3 ft length 3/16 rubber tubing 3/4 oz. Bottle Fluorescein green color concentrate with wetting agent (Enlarged) Manometer - EM151 EM151 Description Electric Manometer with Hose FEATURES: Measures pressure to 20 Water Column with.05 resolution Rugged rubberized case with built-in magnet Simple two button operation Over pressure protection Auto reset feature Auto power off after 5 minutes no activity Battery life 50 hours with alkaline battery Optional AC319 soft sided carrying case available K EM151 sales@mtankco.com

178 SAFETY EQUIPMENT Gas Detectors CO71 CD100A CD200 LPKITPLUS Description Hand Held Carbon Monoxide Detector Combustible Gas Leak Detector Combustible Gas Leak Detector Complete LP Diagnostic Kit Carbon Monoxide Detector CO71 detects CO levels from 0 to 999 ppm. Its tri-color warning indicates three concentration levels. When dangerous CO levels are reached an audible alert sounds. This device is handheld and powered by a 9V battery. CO71 The CD100A is designed to detect combustible gas leaks in residential and small commercial applications. Semiconductor sensor responds instantaneously to all combustible gases. The easily adjusted, steady tic rate can be used in tight quarters where others might not fit. FEATURES: 50 ppm minimum detection Easy one hand operation Long 18 gooseneck Sensor provides accurate detection Tip light in sensor cover illuminates the area of the leak Audio and visual tic rate, fully adjustable Headphone jack CD100A The CD200 has a long, slim gooseneck probe and a bright LED tip light to find combustible gas leaks in tight areas. Its adjustable alarm, easy one-hand operation and impact resistant storage case add up to value and convenience. FEATURES: 50 ppm minimum detection Adjustable tick rate to locate leaks quickly and easily Visual leak detection by LED indicators Long 18 gooseneck Separate user adjustable alarm for predetermined level detection Precision sensor detects the smallest leaks Red LED located on the tip to illuminate search area Fast response of less than two seconds to 40% LEL Includes earphone K CD200 The LPKITPLUS is the complete tank to inside appliance test kit for installers and service technicians. Checks primary/secondary gas pressure, verify fittings are leak free, and tests for CO levels in the living space. Kit includes CD100A Combustible Gas Leak Detector, CO71A Carbon Monoxide Detector, and the EM151 Electronic Manometer. CD100A COMBUSTIBLE GAS LEAK DETECTOR FEATURES: Simple adjustable tic rate Sensor provides accurate detection Easy one hand operation Audio and visual tic rate Long 18 gooseneck Headphone jack Tip light in sensor cover illuminates the area of the leak LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 173

179 SAFETY EQUIPMENT CO71A CARBON MONOXIDE DETECTOR FEATURES: Preset alarms with 3-color warning light and audible alert MAX capture Low battery indicator CO detection to 999 ppm Backlit display One button auto zero EM151 ELECTRONIC MANOMETER FEATURES: Single input to measure positive and negative pressure to 20 wg Ruggedized, including rubber boot with integral magnet Measures in inches water gauge Auto power-off after 5 minutes of no activity LPKITPLUS Magnehelic Gauges Description 2020 Magnehelic Gauge 0-20 WC w/case and Access (2 Boxes) 2020LT Magnehelic Gauge 0-20 WC Low Temp to -20F w/case and Acc (2 Boxes) A432 Case and Accessories for 2020 Magnehelic Gauge 2020 Service Equipment - Pipe Thread Sealant PB04 SS04 SS08 SS16 NT08 NT16 Description 1/4 Pint Gasiola PLS 2 Premium Thread and Gasket Sealer with Teflon Brush 1/4 Pint Gasiola Soft-Set Thread Sealant with Teflon Brush Top 1/2 Pint Gasiola Soft-Set Thread Sealant with Teflon Brush Top 1 Pint Gasiola Soft-Set Thread Sealant with Teflon Brush Top 1/2 Pint Gasiola Non Teflon Blue Pipe Sealant with Brush Top 1 Pint Gasiola Non Teflon Blue Pipe Sealant with Brush Top SS04 PB04 K sales@mtankco.com

180 SAFETY EQUIPMENT Anode Bags #17 Description 17# 17 lb. Magnesium Anode Bag with 13 of No. 12 Lead Wire Attached, 1 for 500 Gallon Tank, 2 for 1,000 Gallon Tank 5# 5 lb. Magnesium Anode Bag with 13 of No. 12 Lead Wire Attached, Generally Used for Piping 9# 9 lb. Magnesium Anode Bag with 13 of No. 12 Lead Wire Attached, Generally Used for Piping Cathodic Protection Equipment Copper Sulfate Crystals Description 6A Copper Sulfate Half Cell Tester Sulfate Crystals Copper Sulfate Crystals - 12 oz Bottle Lug Copper Anode Lug for Attaching Anode to Tank Anode Test Kit Complete Kit - Digital Multimeter, Copper Sulfate Half Cell and Copper Sulfate Crystals RE-5 Electrode Flat Surface Ceramic Plug for General Use on Soil Surfaces, 1-3/8 x 6 Anode Extension Lead Red 12 ft. Extension Lead for Multi Meter MCM Telescoping Ball Top Anode Test Rod with Meter Adapter Plate DM200 Digital Multi Meter with Leads, 600 Volts AC/DC AC504 Carrying Case - 3 Place, Hard Sided Anode Test Kit RE-5C Electrode Anode Test Rod MCM Lock Caps and POL Locks K Description ME530 Saf-T-Lok Male POL Lock ME Saf-T-Lok Key for POL, Pipe and Barrell Locks ME530PL Saf-T-Lok, Male POL Lock with Padlock Cap, Soft Nose ME Locking Pipe Cap 1/2 FNPT ME Locking Pipe Cap 3/4 FNPT ME Locking Flare Plug 3/8 ME Locking Flare Plug 1/2 ME533 Locking Acme Cap 1-3/4 ME540 Hose End and Quick Acting Valve Lock - Use with ME540P ME540P-KA Master Padlock with 2-1/2 Deep Shackle - Keyed Alike ME540P-KD Master Padlock with 2-1/2 Deep Shackle - Keyed Differently Safe-T-Locks are designed to prevent tampering, product theft and/or accidental discharge of product. Fits any size tank valve with a POL or 1-3/4 Acme connection or gas plumbing. ME540, ME540-KA To install, securely screw the plug or cap to the valving or plumbing using the appropriate wrench. Snap locking mechanism into place over plug or cap. Locking mechanism will cover the installation hex or knurl and swivel freely until key is inserted and the lock is removed. LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 175

181 SAFETY EQUIPMENT Lock Caps and POL Locks (continued) FEATURES: All brass body for maximum durability Locking mechanism and key features durable chrome plating Locking mechanism swivels 360 when installed to prevent tampering or removal Locking mechanism cannot be removed without key Universal key for all sizes and styles ME531 Series ME530PL ME530, ME ME540-KA, ME540-KD ME533 ME532 Series Scales Description Capacity Platform Dimensions Shipping Weight 1100 Fairbanks Portable Utility Scale 1000 lb. 23-1/2 x 17-3/4 49 h x 21 w 175 lb Fairbanks Portable Beam Scale 1000 lb. 17-3/4 x 23-1/2 42-3/4 h 175 lb. 854F100P Detecto Portable Platform Scale 1000 lb. 19 x h x 24 w 132 lb Detecto Platform Bench Scale 350 lb. 10-1/2 x 14-1/2 27 h 46 lb. K Fairbanks Series 1100 Fairbanks Series 1124 Detecto 854F100P Detecto 4420 sales@mtankco.com

182 SAFETY EQUIPMENT Scale Parts 50 lb. Test Weight Description 55441BI Beam insert by Fairbanks, lb. x 1/2 lb., (set of 2) Counter Poise by Fairbanks 6P10021X Counter Poise by Detecto lb. Counter Poise Weight by Fairbanks lb. Counter Poise Weight by Fairbanks lb. Counter Poise Weight by Fairbanks 6PP100X 100 lb. Counter Poise Weight by Detecto 6PP200X 200 lb. Counter Poise Weight by Detecto 6PP500X 400 lb. Counter Poise Weight by Detecto C lb. Test Weight by Fairbanks 110-C006-0A 50 lb. Test Weight by Detecto TOOLS & ACCESSORIES Serviceman s Replacement Seal Kit MEW1 Replacement MEW1 Serviceman s Replacement Seal Kit Includes: Qty MEW4 1-1/4 Acme Motor Fuel Flat Gasket 9 MEW3 1-1/4 Acme Flat Gasket 10 MEW2 1-3/4 Acme Flat Gasket 10 MEW5 2-1/4 Acme Flat Gasket 10 MEW6 3-1/4 Acme Flat Gasket 10 ME220M-02 Male Motor Fuel Connector O-ring POL O-ring 12 FEATURES: Durable ABS plastic container with storage latch Labeled with each gasket/o-ring size and part number for easy identification and reorder purposes Preformed insert with individual spaces for each gasket/o-ring size All gaskets/o-rings manufactured from UL Listed approved compounds for LP-Gas and NH 3 services K MEW1 Layout L LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 177

183 TOOLS & ACCESSORIES Flairing Tools 945TH Parker Rolo-Flair Flairing Tool Description Rolo-Flair Flairing Tool 945TH is a single handle, automatic depth gauge, that burnishes and flares in one motion. 945TH Pipe Cutters Description 512 Rothenberger 3/16 Thru 1-1/8 Tubing Cutter with Reamer Rothenberger Replacement Cutter Wheel for Pipe Wrench Size Description RID RID RID Alum Heavy Duty Straight Pipe Wrench RID RID RID RID RID Steel Heavy Duty Straight Pipe Wrench RID RID Channellock Tongue and Groove Pliers Description # /2, 5 Adjustments, 1-1/2 Capacity #440 12, 7 Adjustments, 2-1/4 Capacity #460 16, 8 Adjustments, 4-1/4 Capacity NOTE: Right angle teeth grip in all directions. Undercut tongue and groove won t slip. Patented reinforced edge. Channellock blue comfort grips. #460 L sales@mtankco.com

184 TOOLS & ACCESSORIES Channellock Adjustable Wrenches Description #808 8 Wrench, Capacity 15/16 # Wrench, Capacity 1-3/16 # Wrench, Capacity 1-3/8 # Wrench, Capacity 1-3/4 FEATURES: #815 #815 Measurement scales on jaws ideal to determine size of nuts, pipe, etc. Chrome vanadium steel construction Ergonomic handle, non protruding jaw Methanol Injectors MEP700 MEP Description Marshall Excelsior Complete Vapor Return Methanol Injector Marshall Excelsior Injector Body Only Marshall Excelior s Methanol Injector MEP700 is gravity fed and provides a fast and efficient method to inject methanol into stationary ASME containers to help prevent condensation from freezing in the propane system. WARNING: Never attempt to refill the MEP700 injector with methanol while connected to a propane container. In order for the tank and methanol injector vapor equalization to occur, no more than 42 ounces of methanol can be contained within the methanol injector. MEP700 FEATURES: 1-1/4 female acme vapor connection Spark resistant brass connectors and valve Durable steel construction body Automotive grade powder coat finish for maximum corrosion resistance For use with all multi-valve applications or where vapor recovery systems are in place Maximum capacity = 42 ounces Maximum pressure = 250 PSIG MEP700 L LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 179

185 TOOLS & ACCESSORIES Gloves Size Color Description Lg Orange Textured Monkey Grip Glove, Coated Safety Cuff, Insulated Lg Orange Smooth Monkey Grip Glove, Fully Coated Safety Cuff, Foam Insulated Med Brown/Yellow Winter TUF-DUK Vinyl Glove 9-MED Foam Insulated, Driver s Style Lg Brown/Yellow Winter TUF-DUK Vinyl Glove 10-LRG Foam Insulated, Driver s Style Infinite Lighters INF Flexlight Description Infinite Lighter INF Flexlight L sales@mtankco.com

186 OUTDOOR & CAMPING ACCESSORIES Camping Tees M Packaged Inlet Auxiliary Inlet Outlet Outlet ME /16 Female Acme 1-20 Male ME413 ME413P* #60 Male Soft Nose POL 1-20 Male w/round Brass Handwheel 1-20 Male ME415 ME415P*.9 GPM Excess Flow Male Hard Nose POL Female POL ME416.9 GPM Excess Flow Male Hard Nose POL w/plastic Handwheel Female POL Female POL ME /16 Female Acme 1-5/16 Male Acme/Female POL w/quick Closing Poppet ME420 ME420P*.9 GPM Excess Flow Male 1/4 Female Inverted Flare Hard Nose POL with Check Female POL ME421.9 GPM Excess Flow Male 1-5/16 Male Acme/Female Hard Nose POL POL w/quick Closing Poppet 1-20 Male ME /16 Female Acme 1/4 Female Inverted Flare 1-5/16 Male Acme/Female POL w/quick Closing Poppet ME424 ME42.9 GPM Excess Flow Male 1/4 Female Inverted Flare 1-5/16 Male Acme/Female Hard Nose POL with Check POL w/quick Closing Poppet * Packaged option consists of a plastic clamshell WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. ME412 ME413 ME414 ME420P ME416 ME418 ME421 ME422 ME425 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 181

187 OUTDOOR & CAMPING ACCESSORIES Camping Elbows & Assemblies Packaged Inlet Outlet Outlet ME423 ME423P*.9 GPM Excess Flow Male 1-5/16 Male Acme/Female POL Hard Nose POL with Quick Closing Poppet 1-20 Male ME /6 Female Acme ME475 ME475P* #60 Male Soft Nose POL with Plastic Handwheel ME475AR #60 Male Soft Nose POL with Round Brass Handwheel 1-20 Male ME475B #60 Male Soft Nose POL ME477.9 GPM Excess Flow Male Hard Nose POL with Plastic Handwheel ME481 ME481P* 1-20 Female 1-5/16 Male Acme/Female POL with Quick Closing Poppet ME497 Male Soft Nose POL with Plastic Handwheel ME497AR Male Soft Nose POL with Round Brass Handwheel * Packaged option consists of a plastic clamshell 1-20 Male WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. M ME423 ME474 ME475 ME477 ME475AR ME475B ME497 ME497AR sales@mtankco.com

188 OUTDOOR & CAMPING ACCESSORIES Camping Fittings M ME487P Pack. Inlet Outlet ME417 1/4 MNPT 1-20 Male w/check and O-ring ME Female Cap with Strap ME Female 1/4 Hose Barb ME Female 1/4 FNPT ME487 ME487P* 1-20 Female Female POL ME488 ME488P* 1-20 Female 1/4 MNPT ME491 3/8 Male Flare 1-20 Male w/check and O-ring ME492 ME492P* 1/4 FNPT 1-20 Male - No Check ME493 9/16-18 Male Left Hand 1-20 Male w/check and O-ring ME494 9/16-18 Male Left Hand 1-20 Male - No Check ME496 1/4 Hose Barb 1-20 Male Swivel with Valve Stem and O-ring * Packaged option consists of a plastic clamshell ME417 ME483 ME484 ME485 ME487 ME488 ME491 ME492 ME493 ME494 ME496 LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 183

189 OUTDOOR & CAMPING ACCESSORIES Flow-Longer & Stay-Longer Kits Connection Description Hose Description MER470 Brass Tee.9 GPM Excess Flow Male Hard Nose POL x Female POL x 1-20 Male 12 ft Male x 1-20 Female MER471 Brass Elbow.9 GPM Excess Flow Male Hard Nose POL x 1-5/16 Male Acme/Female POL with Quick Closing Poppet x 1-20 Female 12 ft Male x 1-20 Female MER472 Brass Tee Stay-Longer Propane Kit -.9 GPM Excess Flow Male Hard Nose 5 ft. -.9 GPM Excess Flow Male POL x Female POL x 1-20 Male x 1/4 Female Inverted Flare POL x 1/4 Male Inverted Flare MER473 Brass Tee 5 ft. -.9 GPM Excess Flow Male Hard Stay-Longer Propane Kit -.9 GPM Excess Flow Male Hard Nose POL x Nose POL x 1/4 Male Inverted Flare, Female POL x 1-20 Male x 1/4 Female Inverted Flare and 12 ft Male x 1-20 Female M The Flow-Longer Propane Kits are designed to connect small, portable appliances, normally fueled by disposable LP-Gas cylinders, to the existing LP-Gas fuel supply of a recreational vehicle, cottage, backyard patio, etc. without interrupting the supply of regulated fuel to the system. Flow-Longer eliminates the need to purchase an extra LP-Gas cylinder or several small, disposable type cylinders. The Stay-Longer Propane Kits are designed to give you new flexibility on how you use your LP-Gas. You can stay longer by hooking up auxiliary LP-Gas cylinders, or you can tap into the RV s LP-Gas system to fuel portable high-pressure appliances. All kits include installation instructions and a convenient reusable box for storage. NOTE: The tee fitting must be installed between the vapor withdrawal valve on your LP-Gas container and the pressure regulator. This properly places the tee fitting in the high pressure portion of the LP-Gas system. Gas connections to the tee fitting are not designed for movement or rotation after installation. Flexing, twisting, or vibration should be avoided. MER470 (Boxed) WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. MER470 MER471 MER472 MER473 sales@mtankco.com

190 OUTDOOR & CAMPING ACCESSORIES Quick Connectors F F F F F Description Propane or Natural Gas Male Excess Flow Plug, 1/4 Male Pipe Thread x Male Plug Propane Cylinder Filling Plug, 7/8 Female POL x Male Plug Propane Gas Coupling Adapter Kit, 1/4 Male Pipe Thread x Male Plug/Quick Connect x POL Propane Gas Grill Quick Connect Adapter, Quick Connect x POL M F F F Propane Accessories F F Description F Replacement Propane BBQ Hose and Regulator Assembly w/appliance End Fitting x 3/8 Female Flare for Type 1 (QCC1) Gas Grill System F Propane Y Male Adapter w/handwheel, Throwaway Cylinder Threads x POL F Distribution/Lantern Post Male Throwaway Cylinder Threads x POL F Propane Y Female Adapter with Handwheel, 2 - Female QCC-1 x MPOL F Tank Stabilizer, Fits 20 lb., 30 lb., and 40 lb. Cylinders F Propane Adapter Tee w/cap and Plug, POL x 1-20 (w/check) Throwaway Cylinder Thread x Female POL F Propane Bulk Cylinder Adapter w/handwheel, 1-20 Throwaway Cylinder Thread x POL F Propane Bulk Cylinder Adapter (No Handwheel), 1-20 Throwaway Cylinder Thread x POL F º Propane Low Pressure Regulator w/90º Angle, 3/8 Female Pipe Thread x POL- 11 F Propane Low Pressure Regulator, 3/8 Female Pipe Thread x POL- 11 F º Elbow, POL x 1-20 Male Throwaway Cylinder Thread F Appliance End Fitting, Coupling Nut x 1/4 Male Pipe Thread G483 Propane Brass Cap F F F F F F F LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 185

191 OUTDOOR & CAMPING ACCESSORIES Propane Hoses F F F F F F F F Description 5 Propane Hose Assembly 12 Propane Hose Assembly, Swivel 1-20 Male Throwaway Cylinder Thread x Soft Nose Excess Flow POL w/handwheel 5 Propane Hose Assembly, 1/4 Male Pipe Thread x 3/8 Female Flare 12 Propane Hose Assembly, Swivel 1-20 Male Throwaway Cylinder Thread x Swivel 1-20 Female Throwaway Cylinder Thread 22 Propane Replacement Barbecue Hose, 3/8 Male Pipe Thread x 3/8 Female Flare 5 Propane Hose Assembly, 1/4 Female Pipe Thread x 1/4 Male Pipe Thread 12 Natural Gas Patio Hose Assembly, 3/8 Female Pipe Thread x 3/8 Male Flare Quick Connect/Disconnect with Dust Plug and Cap 5 Propane Hose Assembly, 3/8 Male Pipe Thread x 3/8 Female Pipe Thread F M F F F F F F Propane Brass Fittings F F F F F F F F Description 1/4 Male Pipe Thread x 1-20 Female Throwaway Cylinder Thread 1/4 Male Pipe Thread x 1-20 Male Throwaway Cylinder Thread 9/16 Left Hand Thread x POL w/handwheel 9/16 Left Hand Thread x POL 9/16 Left Hand Thread x 1-20 Throwaway Cylinder Thread w/shutoff 1/4 Male Pipe Thread x POL 1/4 Male Pipe Thread x POL w/handwheel Propane Male Throwaway Cylnder Adapter, Throwaway Thread x 1/4 Female Pipe Thread F F F F F F F F sales@mtankco.com

192 GENERAL INFORMATION Physical Properties of Propane & Butane Propane Butane N Formula C 3H 8 C 4H 10 Normal State, 60 F. 30 Mercury Gas Gas Freezing Point (or Melting) Degrees in Fahrenheit Boiling Point, Degrees in Fahrenheit Specific Gravity of Vapor (Air = 1) at 60º F, 30 Hg Specific Gravity of Liquid (Water = 1) 60/60 F Weight Per Gallon of Liquid at 60º F, lbs Gallons Per Pound of Liquid at 60º F BTU Per Gallon (Vapor) 91, ,600 BTU Per Pound (Vapor) 21,560 21,180 BTU Per Cubic Foot (Vapor) 2,520 3,260 Latent Heat of Vaporization at Boiling Point, BTU/lb Latent Heat of Vaporization at Boiling Point, BTU/gal Specific Heat of Gas, BTU/lb./ºF at 60º F Specific Heat of Liquid, BTU/lb./ºF at 60º F Density of Gas, Pounds Per Cubic Foot Density of Liquid, Pounds Per Cubic Foot Cu. Ft. of Gas/gal. Liquid at 60º F, 30 Hg Cu. Ft. of Gas/lb. Liquid at 60º F, 30 Hg Vapor Pressure, lbs./sq. in. Gauge Temperature -10º F 20 0º F 28 10º F 45 32º F 60 60º F º F º F º F Combustion Data Propane Butane Cubic Feet of Air Required to Burn 1 Cubic Foot of Gas Cubic Feet of Oxygen Required to Burn 1 Cubic Foot of Gas Cubic Feet of Air Required to Burn 1 lb. of Gas Ignition Temperature Maximum Flame Temperature Percent of Gas in Air for Maximum Flame Temperature Maximum Rate of Flame Propagation in 1 Tube, inches/second Limits of Inflammability, Percentage of Gas in Air Mixture Percent at Lower Limit Percent at Maximum Rate of Flame Propagation Percent at Upper Limit LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 187

193 GENERAL INFORMATION Products of Complete Combustion Propane Butane Cubic Feet of CO 2 per Cubic Foot of Gas Cubic Feet Water Vapor per Cubic Foot of Gas Cubic Feet N 2 per Cubic Foot of Gas Pounds of CO 2 per Pounds of Gas Pounds of H 2O per Pounds of Gas Pounds of N 2 per Pounds of Gas Ultimate CO 2 Percent by Volume Standard Domestic Propane Tank Specifications Capacity Diameter Length Tank Weight Gallons Liters Inches Millimeter Inches Millimeter Pounds Kilogram N Vaporization Capacities of Propane Tanks (Approximate) BTU Per Hour With 40% Liquid in Domestic Tank System Tank Size Water Capacity 20 F (-7 C) Prevailing Air Temp. 60 F (16 C) Prevailing Air Temp , , , , ,280 60, , , , , ,032 1,127, ,088,472 1,978,051 Removing Water from Tanks Tank Size Amount of Methanol to Add 150 Gallons One Pint 250 Gallons One Quart 500 Gallons Two Quarts 1000 Gallons One Gallon Water in LP-Gas tanks can reduce the efficiency of appliances powered by the propane. To remove water from tanks add one pint of pure methanol for every 100 gallons of the tank s water capacity. sales@mtankco.com

194 GENERAL INFORMATION Line Sizing Chart for Liquid Propane Flow in GPM N Pipe 1/2 3/ /4 1-1/ /2 3 4 (Feet) Based on 2 PSIG pressure drop. Propane at 60º F. Based on Schedule 40/80 steel/iron pipe Sizing Pipe Between First and Second Stage Regulators Length of Schedule 40 Pipe Nominal Size Copper Tubing Type L Nominal Size Pipe or (Inside Diameter) (Outside Diameter) Tubing (ft.) 1/2 3/ /4 1-1/ /2 4 1/4 3/8 1/2 5/8 3/ Reference: NFPA Pamphlet LEADERSHIP INTEGRITY COMMITMENT MTankCo.com 189

195 Plastic Pipe (Polyethylene) Sizing Between First and Second Stage Regulators GENERAL INFORMATION Length of Pipe (Feet) 1/2 CTS 3/4 IPS 1 IPS 1 1/4 IPS 1 1/2 IPS 2 IPS SDR 7.00 SDR 11.0 SDR SDR SDR SDR (0.445)* (0.860)* (1.077)* (1.328)* (1.554)* (1.943)* *Inside diameter of pipe Maximum undiluted propane capacities listed are based on a pressure of 10 PSIG first stage setting and 1 PSI pressure drop. Capacities listed are 1000 Btu/hr. N sales@mtankco.com

196 GLOSSARY Acme Fittings Adaptors Caps Plugs Actuators Accessories Rotary Angle Valve Anode Equipment Appliance Connectors ASME Cluster Valves ASME Tank Filler Valves Back Check Valves Back Pressure Valves Ball Valves Barb Inserts Brass Fittings ,186 Breakaway Couplings Bulkheads Bulkhead Fittings Bushings Bypass Valves Cable Controls... 27, 29, 35 Cadwelding Testing Equipment Camp Appliance Accessories Assemblies Elbows Fittings Flow-Longer Stay Longer Tees Carburetion Bulkhead Fittings Filler Coupling Cathodic Protection Equipment Channellocks Channellocks Adjustable Wrench Chock Blocks Cluster Valves Combination Valves Combustible Gas Indicators Con-Stab Fittings Copper Sulfate Crystals Copper Tubing Coated Copper Tubing Couplings Breakaway Crimped On Hose Ends Collar Valves Wrench Decals & Signs Dielectric Unions (Fittings) Dispenser Valves Double Check Fill Valves Emergency Shutoff Valves Accessories Actuators Air Tubing, Connectors, & Accessories Swing Check... 32, 33 Engine Fuel Remote Fill Valve Excess Flow Valves Filler Coupling...112, 118 Filler Hose Adapter...105, , , Filler Valve , Filler Valve Adapter Filler Adapters , Filling Heads Fittings Black Iron Brass Dielectric Unions Flare Fittings Forged Steel Last Chance Adapters Pipe Thread Adapters Flex Connectors Flanged Internal Valves , 27 Flaring Tools Flow-Longer Kits Forklift Cylinder Fuel Valve Forklift DOT Multivalve Fuel Line Hose Gas Detectors Gas Grill Accessories Gas Matches Gas Piping Couplings Fittings...134, 135 Manifold Meter Mounts Meter Termination Cylinders... LEADERSHIP 153 INTEGRITY Plastic Pipe COMMITMENT Protection Risers (Plastic Pipe) Underground Adapters Underground Couplings Underground System Gauges and Accessories Accessories Flanged Four Bolt Float Gauge...67, 71, 72, 73, 74 Float Gauge Accessories Gauge Ordering Information Road Master Gauges Rotary Stationary Float Test Threaded Universal Dial Kits Globe & Angle Valves Gloves Hex Plugs High Pressure Test Blocks Hogtails Hoses Assemblies Barbs Couplings (Clamp Style) Crimped On Hose Ends End Fill Check Adapters End Valves...105, 108 End Valve Holster End Valve Lock Filler Valves Reels Swivel Connectors Unloading Adapter Unloading Valves Hydrostatic Relief Valve...43, 160 Internal Valves Accessories Flanged... 22, 23, 24, 26, 27 Threaded... 20, 21, 25, 26 Latches for Internal Valves Leak Detector (Low Temp.) Liquid Transfer Adapters Liquid Transfer Valves Liquid Withdrawal Valves...151, 158 MTankCo.com Lock Caps

197 Low Pressure Adapters Low Pressure Test Blocks Low Pressure Test Kit Manometer Manometer Kit Meters Electronic Meter Liquid Meter Positive Displacement Meter Motors Multipurpose Valves Filler/Withdrawal Multi-Service Valve...146, 148 Withdrawal Nipples O-rings Outdoor & Camping Accessories Camping Assemblies Camping Elbows Camping Fittings Camping Tees Flow-Longer Kits Propane Accessories Propane Brass Fittings Propane Hoses Quick Connectors Stay-Longer Kits Pigtails...19, 20 Pipe Fittings (Polyethylene) Coupling Tools Couplings Elbows Gas Tubing Reducer couplings Reducing Tees Repair Couplings Risers Self-Tapping Tee Tees Pipe Fittings (Steel) Bushings Caps Couplings degree Elbow degree Elbow Nipples Square Head Plugs Tees Unions Pipe Thread Sealant Plant & Vehicle Remote Controls Plugs (Hex) POL Adapters POL Filler Couplings POL Cap & Plugs POL Locks Pressure Gauges Pressure Gauge Adapter Pressure Gauge Snubbers Pressure Test Accessories Pressure Test Gauge Pumps Blackmer Pump Blackmer Pump Part List Corken Pump Corken Pump Part List QCC Adapters QCC Cap QCC Connectors Quick Acting Dispensing Valves Quick Acting Toggle Valves Quick Closing Couplings Quick Connectors (For Camping) Quick Filler Couplings Rain Caps Reducing Couplings Reels Reel Anatomy Reel Part List Registers Regulators PSI Service PSIG...14 Automatic Changeover...13 Commercial / Ind. Second Stage. 8 Direct...17, 18 First Stage High Pressure... 4, 5 First Stage...11 First Stage Excela-Flo... 1 Governor...15, 16 High Pressure Integral Two Stage Compact... 9 Integral Two Stage Domestic... 2, 3 Liquid Backpressure...10 POL Double Stage GLOSSARY Pressure Reducing... 9 Second Stage...11 Second Stage Dielectric Union...12 Second Stage Domestic... 1 Second Stage Low Pressure... 7 Second Stage Light Commercial... 8 Single Stage Low Pressure... 8 Twin Stage...12, 13 Relief Valves External... 37, 40 Flanged Full Internal Full Internal... 38, 39, 43 Hydrostatic... 40, 43 Internal... 41, 42 Internal Spring-Type Pipeaways , 43 Quad-Port Manifold Rain Caps...38, Semi Internal Replacement Seal Kit Risers (Plastic Pipe) Safety Equipment Cathodic Protection Decals & Signs Gas Detectors High Pressure Test Blocks Hose Barbs Leak Detector (Low Temp.) Low Pressure Adapters Low Pressure Test Blocks Low Pressure Test Kit Manometer Manometer Kit Pipe Thread Sealant Pressure Gauge Snubbers Pressure Test Accessories Pressure Test Gauge Safety Shutdown Systems Scales Scale Parts Service Valves ASME Cylinder DOT Containers DOT Cylinders Sight Flow Swing Check Valves Stainless Flex Connector Stainless Steel Tubing Stay-Longer Kits

198 GLOSSARY Swing Check Valve Switches (Palm Valve) Swivel Connectors Tanks ASME Vapor Draw Buffer Home Heating Forklift Rain Caps Valves Test Gauges Tools & Accessories Channellocks Channellocks Adj. Wrench Flaring Tools Gas Matches Gloves Methanol Injector O-rings Pipe Cutters Pipe Wrench Replacement Seal Kit Underground Multi-Service Valve Valves Angle ASME/DOT Container Service , 157 ASME Tank Filler ASME Underground Tank Back Check , 145, 149, 151 Back Pressure Ball Bypass Combination Cylinder Dispenser Double Check Fill DOT Cylinder...158, 159 Emergency Shut-off Engine Fuel Engine Fuel Remote Fill Excess Flow , 184 Excess Flow Adapter...141, 145, , Filler , 148, 149 Flanged Internal Valves , 27 Forklift Cylinder Fuel Globe & Angle Hydrostatic Relief...141, 143,...144, 160 Hose End Internal Liquid Transfer Liquid Withdrawal...151, 157 Locking Handle...108, , Multipurpose Multipurpose Filler Multipurpose Withdrawal Multi-Service...146, 148 Multivalve (420) OPD, Inline , 158 Quick Acting Quick Acting Toggle Relief Relief Manifold (Quad Port) Relief Manifold (Hydrostatic) Service Swing Check... 32, 33, 65, 66 Tank Underground Multi-Service Vapor Vapor Equalization Vapor Return Vent Vapor Coupling Vapor Equalization Valve Vapor Return Valve Vapor Service Valve Vapor Withdrawal Cylinder Valve Vent Valves Wrenches LEADERSHIP Forklift DOT INTEGRITY COMMITMENT MTankCo.com 193

199

200 MTankCo Supply, LLC Industrial Dr. Southaven, MS ph fax MTankCo.com