OUR STORY. Distributor of Gas Products

Transcription

1 A

2 OUR STORY A A A A A MTankCo Supply, LLC is an equipment distributor in the LP gas industry. We concentrate on offering our customers options when it comes to propane equipment. With a large assortment of products and the knowledge to support our customers we strive to be your dedicated distributor in the LP gas industry. Our mission is to provide the leadership to advance the propane industry, the commitment to provide the best products and services available, and the integrity to be a responsible and ethical industry leader. MTankCo has been distributing propane equipment and heaters for over 50 years and has always been customer oriented. We first started as McCarson Wholesale Supply in the late 1950 s out of a small building behind Mr. McCarson s house in Walls, MS. In April of 1981, Mr. McCarson decided to pass his legacy onto Minor and Terry Smith and operated out of the same small building in Walls, MS as Smith s LP Supply Company. The expansion of Smith s LP Supply Company was inevitable and in 1984 we strategically purchased a larger facility in Southaven, MS where it operates today. More recently in June 2013, Mississippi Tank Company acquired Smith s LP to create MTankCo. The creation of MTankCo will allow existing and new customers to receive the same quality service while offering the ability to choose from an expanding equipment line. Mississippi Tank Company lends over 65 years of experience in the propane gas industry as well as other compressed gases. They have been manufacturing tanks for trucks, transports, and storage facilities since the early 1950 s and offering services such as tests, inspections, and repairs. Mississippi Tank Company is the largest manufacturer of transports in the US and has continued to expand its Hattiesburg, MS and Vincennes, IN facilities to best serve their growing base of customers. The combined experience of Mississippi Tank Company and MTankCo Supply will allow our customers to have not only an array of products to choose from, but to have great service to assist them in their LP gas equipment needs. Distributor of Gas Products A MTankCo Supply, LLC Headquarters 3000 W. 7th St. Hattiesburg, MS Export Department MTC Export Dept Tel Fax sales@dega.com Main Office Industrial Dr. Southaven, MS Midwest Division 1301 E. Elkhorn Rd. Vincennes, IN Customer Service Fax Online Sales sales@mtankco.com

3 CONTENTS CONTENTS M H I J K L SECTION A PAGE Regulators Pigtails and Hogtails SECTION B Internal Valves and Accessories SECTION C Actuators and Accessories Emergency Shutoff Valves and Accessories SECTION D Relief Valves Bypass Valves Excess Flow Valves Back Check Valves Needle Valves Vent Valves Bolt & Socket Weld Adapters Globe and Angle Valves Y-Strainers SECTION E Ball Valves Hose Assemblies SECTION F Fittings (Galvanized, Black Iron, and Forged Steel) Sight Flow Swing Check Valves Gauges and Accessories SECTION G Pumps and Pump Parts Motors Meters and Registers SECTION H Plant and Vehicle Remote Controls Reels Hoses and Accessories Flex Connectors Turbo-Flo Dry Break Transfer System Hose End Valves and Accessories Chock Blocks & Utility Bracket Interlock Technology Hose End Adapters Filler and Vapor Couplings Acme Caps, Plugs, and Chains Dispenser Valves and Adapters Engine Fuel Bulkheads and Carb Fittings Filler Couplings and Adapters LPG Filling Heads Breakaway Couplings Autogas Dispensers Fuel Management Equipment Autogas Accessories Thermometers & Gauges QCC Caps, Adapters, and Connectors SECTION I POL Adapters Flare/Brass Fittings Copper Tubing Corrugated Stainless Steel Tubing Gas Piping Plastic Pipe Con-Stab Fittings Risers Appliance Connectors SECTION J Domestic Tank Valves and Accessories Cylinders, Tanks, Cylinder Valves, and Accessories SECTION K Safety Equipment Decals and Signs Pressure Gauge Snubbers and Leak Detectors Hose Barbs, Ferrules and Menders Pressure Test Blocks and Test Kits Low Pressure Adapters, Pressure Test Gauges, and Accessories Manometers Gas Detectors Magnehelic Gauges and Pipe Thread Sealant Anode Bags and Cathodic Protection Equipment Lock Caps and POL Locks Scales and Scale Parts SECTION L Tools and Accessories SECTION M Outdoor and Camping Accessories Camping Tees, Elbows, and Assemblies Camping Fittings Flow-Longer and Stay-Longer Kits Quick Connectors Propane Hoses and Accessories Propane Brass Fittings SECTION N General Information M H I DJ K L

4 REGULATORS REGULATORS First Stage Excela-Flo Domestic Regulators First Stage Excela-Flo Domestic Regulators Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Range (PSI) Outlet Set Point (PSI) Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Range (PSI) Outlet Set Point (PSI) A MEGR-1122H-AAJ MEGR-1222H MEGR-1622H-HGJ Series MEGR-1122H-AAJ Compact 1,000,000 1/4 FNPT 1/2 FNPT MEGR-1122H-AAJXB** Compact 1,000,000 1/4 FNPT 1/2 FNPT MEGR-1222H-BGF Compact 1,000,000 F. POL 1/2 FNPT MEGR-1222H-BGFXB** Compact 1,000,000 F. POL 1/2 FNPT MEGR-1622H-BGJ Compact 2,200,000 1/2 FNPT 1/2 FNPT MEGR-1622H-BGJ Full Size 2,200,000 1/2 FNPT 1/2 FNPT MEGR-1622H-DGJ Full Size 2,500,000 3/4 FNPT 3/4 FNPT MEGR-1622H-HGJ Full Size 2,300,000 F. POL 1/2 FNPT MEGR-1622H-JGJ Full Size 2,750,000 F. POL 1/2 FNPT *Based on 30 PSIG inlet pressure and 20% droop **Indicates vent orientation over pressure taps The MEGR-1122H Series Domestic Regulators are used to reduce LP gas tank pressures for second stage regulators (normally 10 PSIG). All MEC first stage regulators are red indicating high outlet pressure. The MEGR-1122H Series offers optimal relief performance that well exceeds UL test requirements providing double failure over pressure protection when used with MEC MEGR-1622 and MEGR-1652 Serious Sound Stage regulators. All MEC Excela-Flo domestic regulators feature a 25 year recommended replacement life and exclusive tear away leak check adhesive sticker. MEGR-1122H Series and MEGR-1222H - Offers a compact design perfect for tight applications such as underground tank domes. They feature an adjustment range from 9-12 PSIG (factory 10 PSIG), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms and large aluminum precision machined orifice to minimize corrosion resistance against weather or contaminated gas. Vents have 3/8 FNPT tapped ports and E-Z Grip screens located over the outlet. MEGR-1622H Series - Offers the same features as the compact MEGR-1122H Series in a full size version as well as having a reinforced diaphragm for superior downstream regulation, heavy duty wrench flats, and a large 3/4 FNPT tapped drip lip vent to help prevent relief vent blockage. TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSIG; Exerior Finish: Red powder coat; Orifice Size:.15 (compact) 7/32 (full); Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (2); Relief Travel Stop: Molded in adjustment cap - gray (compact), black (full size) MEGR-1622H-BGK Full Size 2,100,000 1/2 FNPT 1/2 FNPT MEGR-1622H-HGK Full Size 2,200,000 F. POL 1/2 FNPT MEGR-1622H-JGK Full Size 2,650,000 F. POL 3/4 FNPT *Based on 30 PSIG inlet pressure and 20% droop These First Stage Regulators are used to reduce LP gas tank pressures for a second stage regulator (5 PSIG). All MEC first stage regulators are red indicating high outlet pressure. First stage regulator vents have 3/4 FNPT tapped ports and E-Z Grip screens located over the outlet. The MEGR-1622H series offer optimal relief performance that well exceeds UL test requirements providing double failure overpressure protection when used with MEC MEGR-1622, MEGR-1642 and MEGR-1652 Series Second Stage regulators. All MEC Excela-Flo domestic regulators feature a 25 year recommended replacement life and our exclusive tear away leak check adhesive sticker. First Stage Excela-Flo Domestic Regulators Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Range (PSI) Outlet Set Point (PSI) MEGR-1222HT-BGF Compact 1,000,000 F. POL/Tee 1/2 FNPT MEGR-1622HT-HGJ Full Size 2,300,000 F. POL/Tee 1/2 FNPT MEGR-1622HT-JGJ Full Size 2,750,000 F. POL/Tee 3/4 FNPT *Based on 30 PSIG inlet pressure and 20% droop These first stage F. POL tee inlet regulators are used to reduce LP gas tank pressures for a second stage regulator (normally 10 PSIG) in a multiple tank manifold installation without adapters or tees. All MEC first stage regulators are red indicating high outlet pressure. Compact First stage regulator vents have 3/8 FNPT tapped ports and E-Z Grip screens located over the outlet. The MEGR-1222HT series offers optimal relief performance that well exceeds UL test requirements providing double failure overpressure protection when used with MEC MEGR-1622, MEGR-1642 and MEGR-1652 Series Second Stage regulators. All MEC Excela-Flo domestic regulators feature a 25 year recommended replacement life and our exclusive tear away leak check adhesive sticker. MEGR-1622H-JGK Full Size Series MEGR-1222HT Compact Tee Inlet Series A TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSIG; Exterior Finish: Red powder coat; Orifice Size: 0.15 (Compact) (Full); Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (2); Relief Travel Stop: Molded in adjustment cap - gray (compact), black (full size) 1 2

5 REGULATORS REGULATORS Second Stage Excela-Flo Domestic Regulators Integral Two Stage Excela-Flo Domestic Regulators A MEGR-1222-BAF Compact Series MEGR-1252-BAF Compact Series MEGR-1622 Full Size Series MEGR-1642-DFF with Side Outlet MEGR-1652 Back Mount Series Type Capacity in BTU/HLPG* *Based on 10 PSIG inlet pressure and 20% droop **Back mount configuration ***Vent over outlet ****Side outlet configuration These compact second stage regulators are used to reduce outlet pressures from first stage regulators (normally 10 PSI) to 11 WC in domestic installations. All MEC second stage regulators are green indicating low outlet pressure. All MEC second stage domestic regulators feature a stainless steel inlet filter screen to reduce debris from passing through the regulator. All MEC Excela-Flo domestic regulators feature a 25 year recommended replacement life and our exclusive 3-part tear away leak check adhesive sticker. MEGR-1222 and MEGR-1252 Series - Offers a second stage regulator design perfect for lower BTU applications. They feature an adjustable range from WC (factory 11 WC), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms and large aluminum precision machined orifices providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. The MEGR-1222 Series have both the inlet and outlet in line where the MEGR-1252 series have a rear discharge back mount outlet for convenient wall mount applications. MEGR-1622 and MEGR-1652 Series - Offers the same features as the compact MEGR-1222 Series in a full size, high capacity version. MEC full size second stage regulators have a large fabric reinforced diaphragm for superior downstream regulation, heavy duty wrench flats, and a large 3/4 FNPT tapped drip lip vent to help prevent relief valve blockage. The MEGR-1622 Series has the inlet and outlet in line where the MEGR-1652 Series has a back mount outlet. The MEGR-1642 Series Regulators features an adjustable range from 9-13 WC (factory 11 WC), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms and large aluminum precision machined orifices providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. Our full size second stage regulators have a large fabric reinforced diaphragm for superior downstream regulation, heavy duty wrench flats, and a large 3/4 FNPT tapped drip lip vent to help prevent relief valve blockage. The MEGR-1642 Series has the outlet at 90 degrees from the inlet making it ideal for vapor meter installations. Inlet Outlet Outlet Adj. Range ( WC) Outlet Set Point ( WC) MEGR-1222-BAF Compact 500,000 1/2 FNPT 1/2 FNPT MEGR-1222-CFF Compact 800,000 1/2 FNPT 1/2 FNPT MEGR-1222-DFF Compact 800,000 3/4 FNPT 3/4 FNPT MEGR-1252-BAF** Back Mount 500,000 1/2 FNPT 1/2 FNPT MEGR-1252-CFF** Back Mount 650,000 1/2 FNPT 3/4 FNPT MEGR-1252-DFF** Back Mount 700,000 3/4 FNPT 3/4 FNPT MEGR-1622-BCF Full Size 710,000 1/2 FNPT 1/2 FNPT MEGR-1622-CFF Full Size 1,300,000 1/2 FNPT 3/4 FNPT MEGR-1622-CFFXO*** Full Size 1,300,000 1/2 FNPT 3/4 FNPT MEGR-1622-DFF Full Size 1,300,000 3/4 FNPT 3/4 FNPT MEGR-1622-DFFXO*** Full Size 1,300,000 3/4 FNPT 3/4 FNPT MEGR-1642-DFF**** Side Outlet 900,000 3/4 FNPT 3/4 FNPT MEGR-1652-CFF** Back Mount 1,000,000 1/2 FNPT 3/4 FNPT MEGR-1652-DFF** Back Mount 1,000,000 3/4 FNPT 3/4 FNPT Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Range ( WC) Outlet Set Point ( WC) MEGR-1232-BBF Compact 450,000 1/4 FNPT 1/2 FNPT MEGR-1232-BBFXA** Compact 450,000 1/4 FNPT 1/2 FNPT MEGR-1232-HBF Compact 450,000 F. POL 1/2 FNPT MEGR-1232-HBFXA** Compact 450,000 F. POL 1/2 FNPT MEGR-1232-HFF Compact 625,000 F. POL 3/4 FNPT MEGR-1232-HFFXA** Compact 625,000 F. POL 3/4 FNPT MEGR-1632-BCF Full Size 700,000 1/4 FNPT 1/2 FNPT MEGR-1632-BCFXA** Full Size 700,000 1/4 FNPT 1/2 FNPT MEGR-1632-CFF Full Size 950,000 1/4 FNPT 3/4 FNPT MEGR-1632-CFFXA** Full Size 950,000 1/4 FNPT 3/4 FNPT MEGR-1632-HCF Full Size 700,000 F. POL 1/2 FNPT MEGR-1632-HCFXA** Full Size 700,000 F. POL 1/2 FNPT MEGR-1632-JFF Full Size 900,000 F. POL 3/4 FNPT MEGR-1632-JFFXA** Full Size 900,000 F. POL 3/4 FNPT *Based on 30 PSIG inlet pressure and 20% droop **Indicates regulator vents opposite pressure tap ports The MEGR-1232 Compact Series and the MEGR-1632 Full Size Series Regulators combine the first and second stage regulator set-up into one convenient unit converting tank pressure to 11 WC. All MEC integral two stage domestic regulators are gray indicating low outlet pressure. Integral two stage regulators are recommended for installations with short piping distances, but provide the same advantages of two stage regulation with a single unit. All MEC integral two stage regulator vents have tapped ports (7/ First Stage) 3/8 FNPT Second Stage Compact / 3/4 FNPT Second Stage Full Size) and an exclusive E-Z grip screen located over the outlet. The MEGR-1232 and the MEGR-1632 Series both offer optimal relief performance that well exceeds UL test requirements providing over pressure protection of no more than 2 PSI downstream pressure. MEC Excela-Flo integral two stage domestic regulators feature a 25 year recommended replacement life, an exclusive Tri-Tap (tank, 10 PSI, 11 WC) pressure port system, and tear away leak check adhesive sticker. MEGR-1232 Compact Series - Offers a compact integral two stage regulator design perfect for lower BTU applications and confined spaces. They feature an adjustable range from 8-14 WC (factory 11 WC). Stainless steel integral components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms, and large precision machined aluminum orifices providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. Compact series regulators feature 3/8 FNPT drip lip vent openings. MEGR-1632 Full Size Series - Offers the same features as the compact MEGR-1232 Series in a full size, high capacity version. The full size MEGR-1632 diaphragm provides superior downstream regulation, heavy duty wrench flats, and a large 3/4 FNPT tapped drip lip vent to help prevent relief vent blockage. MEGR-1232 Compact Series MEGR-1632 Full Size Series TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSIG; Exerior Finish: Gray powder coat; Orifice Size: 17 (Compact) 7/32 (Full); Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (3); Relief Travel Stop: Molded in adjustment cap - gray (compact), black (full size) A TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 10 PSIG; Exterior Finish: Green powder coat; Orifice Size:.14 (BAF),.17 (CFF & DFF); Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (2); Relief Travel Stop: Molded in adjustment cap - gray (compact), black (full size) 3 4

6 REGULATORS REGULATORS Integral Second Stage Excela-Flo Domestic Regulators Integral Two Stage 2 PSI Excela-Flo Service Regulators A MEGR-1232T Compact Series ME2130 Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Range ( WC) Accessory First Stage Pipe Away Elbow 1/4 M. Inverted Flare x 1/4 F. Inverted Flare Outlet Set Point ( WC) MEGR-1232T-HBF Compact 450,000 F. POL Tee 1/2 FNPT MEGR-1232T-HBFXA** Compact 450,000 F. POL Tee 1/2 FNPT MEGR-1632T-HFF Compact 625,000 F. POL Tee 1/2 FNPT MEGR-1632T-HFFXA** Compact 625,000 F. POL Tee 3/4 FNPT MEGR-1632T-HCF Full Size 700,000 F. POL Tee 3/4 FNPT MEGR-1632T-HCFXA** Full Size 700,000 F. POL Tee 1/2 FNPT MEGR-1632T-JFF Full Size 900,000 F. POL Tee 3/4 FNPT MEGR-1632T-JFFXA** Full Size 900,000 F. POL Tee 3/4 FNPT *Based on 30 PSIG inlet pressure and 20% droop **Indicates regulator vents opposite pressure tap ports Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Outlet Set Range ( WC) Point ( WC) MEGR-1232E-BBH Compact 500,000 1/4 FNPT 1/2 FNPT MEGR-1232E-BBHXA** Compact 500,000 1/4 FNPT 1/2 FNPT MEGR-1232E-HBH Compact 500,000 F. POL 1/2 FNPT MEGR-1232E-HBHXA** Compact 500,000 F. POL 1/2 FNPT MEGR-1632E-BCH Full Size 850,000 1/4 FNPT 1/2 FNPT MEGR-1632E-BCHXA** Full Size 850,000 1/4 FNPT 1/2 FNPT MEGR-1632E-CFH Full Size 850,000 1/4 FNPT 3/4 FNPT MEGR-1632E-CFHXA** Full Size 850,000 1/4 FNPT 3/4 FNPT MEGR-1632E-HCH Full Size 900,000 F. POL 1/2 FNPT MEGR-1632E-HCHXA** Full Size 900,000 F. POL 1/2 FNPT MEGR-1632E-JFH Full Size 850,000 F. POL 3/4 FNPT MEGR-1632E-JFHXA** Full Size 850,000 F. POL 3/4 FNPT *Based on 30 PSIG inlet pressure and 20% droop **Indicates regulator vents opposite pressure tap ports MEGR-1232E Compact Series A MEGR-1632T-HCF Full Size Series These integral two-stage regulators combine the first and second stage regulator set-up into one convenient unit converting tank pressure to 11 WC with the convenience of a F. POL Tee inlet for multiple tank applications. All MEC integral two-stage domestic regulators are gray indicating low outlet pressure. Integral two-stage regulators are recommended for installations with short piping distances, but provide the same advantages of two-stage regulation with a single unit. All MEC integral two-stage regulator vent have tapped ports (7/16-24-First Stage) (3/4 FNPT - Second Stage) and our exclusive E-Z Grip screens located over the outlet. Both the MEGR-1232T and MEGR-1632T series offer optimal relief performance that exceeds UL test requirements providing over pressure protection of no more than 2 PSI downstream pressure. MEC Excela-Flo integral twostage domestic regulators feature a 25 year recommended replacement life, our exclusive Tri-TapTM (tank, 10 PSI, 11 WC) pressure port system and tear away leak check adhesive sticker. MEGR-1232T Compact Series - Offers a compact integral two-stage regulator design perfect for lower BTU applications and confined spaces. They feature an adjustment range from 9-13 WC (factory 11 WC). Stainless steel integral components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms, and large precision machined aluminum orifices providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. MEGR-1632 Full Size Series - Offers all of the same features as the compact MEGR-1232 series in a full size high capacity version. The full size MEGR-1632 diaphragm provides superior downstream regulation, has heavy duty wrench flats and a large 3/4 FNPT tapped drip lip vent to help prevent relief vent blockage. TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSIG; Exerior Finish: Gray powder coat; Orifice Size:.17 (Compact).219 (Full); Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (3); Relief Travel Stop: Molded in adjustment cap - gray (compact), black (full size) The MEGR-1232E Compact Series and the MEGR-1632E Full Size Series Regulators combine the first and second stage regulator set-up into one convenient unit converting tank pressure to 2 PSI. All MEC integral two stage 2 PSI regulators are white indicating 2 PSI outlet pressure. Integral two-stage 2 PSI regulators are recommended for installations with short piping distances, but provide the same advantages of two stage regulation with a single unit. 2 PSI service regulators are used in conjunction with a LPG line regulator either at the indoor appliance or a remote manifold distribution header inlet. All MEC integral two stage regulator vent have tapped ports (7/ First Stage) (3/8 FNPT or 3/4 FNPT - Second Stage) and MEC s exclusive E-Z Grip screens located over the outlet. Both the MEGR-1232E and MEGR-1632E series offer optimal relief performance that well exceeds UL test requirements providing over pressure protection of no more than 4 PSI downstream pressure. MEC Excela-Flo integral two-stage domestic regulators feature a 25 year recommended replacement life, MEC s exclusive Tri-Tap TM (tank, 10 PSI, 2 PSI) pressure port system and tear away leak check adhesive sticker. MEGR-1232E Compact Series - Offers a compact integral two-stage 2 PSI regulator design perfect for lower BTU applications and confined spaces. They feature an adjustment range from PSI (factory 2 PSI). Stainless steel integral components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms, and large precision machined aluminum orifices providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. MEGR-1632E Full Size Series - Offers all of the same features as the compact MEGR-1232E series in a full size high capacity version. The full size MEGR-1632E diaphragm provides superior downstream regulation, has heavy duty wrench flats and a large 3/4 FNPT tapped drip lip vent to help prevent relief vent blockage. MEGR-1632E-BCH Full Size Series TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSIG; Exerior Finish: White powder coat; Orifice Size: 17 (Compact) 7/32 (Full); Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (3); Relief Travel Stop: Molded in adjustment cap - gray (compact), white (full size) 5 6

7 REGULATORS REGULATORS 2 PSI Outlet Service Regulators First Stage/High Pressure Industrial Regulators (continued) A MEGR-1622E Series Type Capacity in BTU/HLPG* Inlet Outlet Outlet Adj. Outlet Set Range (PSI) Point (PSI) MEGR-1622E-BCH Full Size 1,100,000 1/2 FNPT 1/2 FNPT MEGR-1622E-DCH Full Size 1,400,000 3/4 FNPT 3/4 FNPT MEGR-1652E-DFH Backmount 1,300,000 3/4 FNPT 3/4 FNPT * Based on 10 PSIG inlet pressure and 20% drop ** Indicates back mount configuration The MEGR-1622E and MEGR-1652E Series are used to reduce outlet pressures from first stage regulators (normally 10 PSI) to a nominal 2 PSI. 2 PSI service regulators are used in conjunction with an LPG line regulator either at the indoor appliance or a remote manifold distribution header inlet. All Marshall Excelsior s (MEC) 2 PSI service regulators are white with white adjustment caps. The full size 2 PSI service regulators have 3/4 FNPT tapped vents and our exclusive E-Z grip screens located over the inlet. All MEC 2 PSI service regulators feature a stainless steel inlet filter screen to reduce debris from passing through the regulator. Both the MEGR-1622E and MEGR-1652E series offer optimal relief performance that exceeds UL test requirements. All MEC Excela-Flo domestic regulators feature a 25 year recommended replacement life and our exclusive tear away leak check adhesive sticker. Inlet/Outlet Orifice PSIG Outlet PSIG Outlet Monitor BTU/HLPG@ BTU/HLPG@ Set Point Range 100 PSI Inlet 20 PSI Inlet MEGR /78 2 FNPT 1/ ,900 47,000,000 7,700,000 NOTE: Other configurations and materials available upon request. The MEGR-1630 Series First Stage Industrial Regulators are large capacity, high pressure units for use in conjunction with MEGR-S1202 Series regulators. They can also be used on final stage (pounds-to-pounds) service. These regulators are best suited for industrial applications where high flow capacity is required. TECHNICAL SPECIFICATIONS for the MEGR-1627 and MEGR-1630 Series: Max. Inlet Pressure: 10 PSI; Exterior Finish: Gray powder coat; Orifice Size: 3/8, 5/16 or 1/2 ; Orifice Material: Aluminum; Diaphragm: Fabric reinforced (NBR); Bonnet/Body Material: Die cast aluminum/iron; Regulator Spring: Steel; Listings: c UL us /UL144; Relief Travel Stop: Molded in adjustment cap - white; Temp. Range: -20 F / 180 F High Pressure Regulators - Adjustable MEGR-1630 Series A MEGR-1652E Series MEGR-1622E Series: Offers a full size high capacity molded lip fabric reinforced diaphragm, stainless steel internal components, fluorocarbon (FKM) seat discs, precision machined aluminum orifices, and an adjustment range from PSI (factory 2 PSI) providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. MEGR-1652E Series: Offers all of the same features as the MEGR-1622E Series but with a rear discharge back mount outlet for convenient wall mount applications. Inlet/Outlet Outlet Adj. Range PSIG MEGR MEGR Adj. High Pressure Regulator 1/4 FNPT 1-60 MEGR High Pressure Regulators - Fixed TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 10 PSI; Exterior Finish: Green powder coat; Orifice Size: 7/32 ; Seat Material: Fluorocarbon (FKM); Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum; Listings: c UL us /UL144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (2); Relief Travel Stop: Molded in adjustment cap - white First Stage High Pressure Industrial Regulators Inlet/Outlet Outlet Set Point PSIG MEGR MEGR MEGR MEGR High Pressure Fixed Regulator 1/4 FNPT 30 MEGR MEGR MEGR MEGR-6120 Series MEGR-1627 Series Inlet/Outlet Orifice PSIG Outlet PSIG Outlet BTU/HLPG@ BTU/HLPG@ Monitor Set Point Range 100 PSI Inlet 20 PSI Inlet MEGR-1627/497 1 FNPT 1/ No 36,600,000 6,050,000 MEGR-1627/576 2 FNPT 1/ No 45,000,000 6,003,000 MEGR-1627/5810 3/4 FNPT 3/ No 11,700,000 4,700,000 MEGR-1627/6210 3/4 FNPT 1/ No 12,400,000 6,700,000 MEGR-1627/ FNPT 1/ No 25,100,000 6,900,000 MEGR-1627M/267 2 FNPT 1/ Yes 36,100,000 6,003,000 MEGR-1627M/471 1 FNPT 1/ Yes 25,100,000 6,900,000 MEGR-1627R/113 3/4 FNPT 3/ Relief 9,800,000 4,200,000 MEGR-1627V/7710* 1 FNPT 1/ No 25,100,000 6,900,000 * Viton construction The MEGR-1627 Series Commercial/Industrial Regulator is a large capacity, high pressure unit for use in conjunction with MEGR-CS1200 or MEGR-S1202 Series regulators. It can also be used on final-stage (PSI to PSI) service. The diaphragm case and/or regulator body on the MEGR-1627 Series can be rotated in any of four positions to allow installation in locations with limited space. Available with a monitor or integral relief valve. The MEGR-1627 Series is perfectly suited for jurisdictional systems, grain dryers, direct fired vaporizers or other high capacity service applications. Outlet Set Point Capacities: BTU/H LPG (Vapor) Inlet Pressure BTU/HR 50 PSI 850, PSI 100 PSI 1,700, PSI 2,500, PSI 50 PSI 900, PSI 1,800, PSI 100 PSI 1,500, PSI 2,000, PSI 1,300, PSI 150 PSI 1,800, PSI 2,300,000 * Approximate BTU/H vapor capacities taking 10-20% droop into consideration NOTE: Side Outlet Connection Style (Plugged): 1/4 MNPT, pressure gauge (MEJ500 Series) can be installed The MEGR-6120 Series are UL listed highpressure regulators that meet a variety of applications for liquid or vapor service. The compact body design makes them useful in installations with space limitations. The basic MEGR-6120 Series come equipped with a handwheel adjustment. The ME6121 Series has a tamper-resistant spring case. The MEGR-6120 and MEGR-6121 Series are UL listed as high pressure, non-relief regulators. They contain brass materials that are not compatible with anhydrous ammonia service. MEGR-6121 Series TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSI (17, 2 bar); Gauge Port: 1/4 FNPT; Exterior Finish: Red wet coat; Diaphragm: Fabric reinforced Buna N; Body/Bonnet Material: Die cast aluminum; Liquid Capacity: 3-5 GPH; Listings: UL Listed /UL

8 REGULATORS REGULATORS Domestic Excela-Flo Automatic Changeover Regulators Automatic Changeover Regulators A Primary Cylinder Reserve Cylinder Mounting Covers BTU/Hr.** BTU/Hr.** Bracket MEGR-253* 2 Stage Auto Changeover Regulator 1/4 Inv. Flare x 3/8 FPT 225, ,000 MEGR-900 MEGR-253H* High Capacity 2 Stage Auto Changeover Reg. 1/4 Inv. Flare x 3/8 FPT 350, ,000 MEGR-862 or MEGR-RVB MEGR-253L* Low Capacity 2 Stage Auto Changeover Reg. 1/4 Inv. Flare x 3/8 FPT 150, ,000 * Packaged option consists of a plastic clamshell with barcode. To order add P at the end of the part number i.e. MEGR-253P ** BTU/H 20% Droop Note: MEGR-253 and MEGR-253H set point: 100 PSIG 11 WC Outlet 30 SCFH Air; MEGR-253L set point: 100 PSIG 11 WC outlet 10 SCFH Air The MEGR-253 Series Automatic Changeover Regulators automatically redirect LP gas vapor flow from an empty service cylinder to a reserve cylinder, without interruption of service. It features an easy to read green indicator which changes to red when the service cylinder needs to be refilled. Type *Based on 30 PSIG inlet pressure and 20% droop Primary Cylinder Capacity BTU/HLPG (1) Auxilary Cylinder Capacity in BTU/H LPG* These Two Stage, Automatic Changeover Regulators combine the first and second stage regulator into one unit converting full tank pressure to 11 WC. MEC Excela-Flo Automatic Changeover regulators prevent gas outages by switching supply cylinders over to the reserve cylinder automatically when the primary cylinder is near empty. When the primary cylinder is depleted causing the changeover to occur a red indicator will appear signifying the reserve cylinder in now in use and the primary cylinder can be refilled without loss of service. Inlet Outlet Outlet Adj. Range ( WC) Outlet Set Point ( WC) MEGR-175CS61222-BAF Compact 400, ,000 1/4 IF (2) 1/2 FNPT MEGR-175CS61622-BCF Full Size 650, ,000 1/4 IF (2) 1/2 FNPT MEGR-175CS61622E-BCH Full Size 625, ,000 1/4 IF (2) 1/2 FNPT PSI 2 PSI A MEGR-253 MEGR-253H High Capacity The MEGR-253H Two-stage High-pressure Regulator reduces container pressure to approximately 10 to 15 PSIG and then the second stage completes the process by reducing inlet pressure down to 11 inches of water column outlet pressure. The MEGR-253L is specifically intended for application with low BTU demands but still require two stage regulation. The Model MEGR-253L is ideally suited for RV, manufactured homes, cabins or other applications with a single appliance or low BTU multiple appliance applications while still permitting maximum range of output pressure adjustment. The MEGR-253, MEGR-293H and MEGR-253L Series Regulators meet UL, RVIA and NFPA requirements. TECHNICAL SPECIFICATIONS: Maximum Inlet Pressure: 250 PSIG; Exterior Finish: Raw Zinc (MEGR-253), Powder Coat (MEGR-253H); Inlet Connection: 1/4 Female inverted flare (2); Outlet Connection: 3/8 FNPT (1); Diaphragm: Fabric reinforced molded with O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast zinc; Listings: UL listed / UL 144; Mounting Holes: Standard 3-1/2 center; Pressure Taps: 1/8 FNPT plugged (1) MEGR-175CS61622-BCF Series: Offers all of the same features as the compact MEGR-175S61222 series but with a full size high capacity second stage regulator option. The full size second stage diaphragm provides superior downstream regulation and features heavy duty wrench flats and a large 3/4 FNPT tapped drip lip vent to help prevent relief vent blockage. This regulator is perfect for manifolding larger tanks together such as 420 LB cylinders. MEGR-175CS61222-BAF Series: Offers a compact two stage regulator option for lower BTU applications such as mobile or seasonal homes. They feature a second stage adjustment from 8-14 WC (factory 11 WC), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms, and large precision machined aluminum orifices providing superior downstream regulation and maximum resistance against weather or contaminated gas. The compact second stage features a 3/8 FNPT drip lip vent. TECHNICAL SPECIFICATIONS: Maximum Inlet Pressure: 250 PSIG; Exterior Finish: Green and gold powder coat; Orifice Size:.14 (compact).219 (full); Seat Material: (NBR) First stage, fluorocarbon (FKM) 2nd stage; Diaphragm: Fabric reinforced (NBR)/molded lip O-ring bonnet/body seal; Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast zinc/plastic first stage, die cast aluminum second stage; Listings: c UL us /UL144 2nd stage; Mounting Holes: Standard 3-1/2 center; Pressure Taps: #54 orifice 1/8 FNPT plugged (1); Relief Travel Stop: Molded in adjustment cap - gray (compact), black (full size) MEGR-175CS61222-BAF Compact Series MEGR-175CS61222-BCF Full Size Series MEGR-253L Low Capacity MEGR-175CS61622E-BCH Full Size Series 9 10

9 REGULATORS REGULATORS High Pressure Regulators High Pressure LP Gas Regulators A Inlet/Outlet Outlet Pressure Outlet Adj. BTU/HLPG@ Setting PSIG Range PSIG 100 PSI Inlet MEGR-164/ ,700,000 1/2 FNPT x 1/2 FNPT MEGR-164/ ,600,000 Adjustable High MEGR-164/36 Pressure Regulator ,200,000 MEGR-164/ ,300,000 MEGR-164SR/21 1/2 FNPT x 1/2 FNPT ,000,000 MEGR-164SR/22 Adj. High Pressure Regulator ,000,000 MEGR-164SR/23 w/ Internal Relief Valve ,600,000 MEGR-164-6/ ,700,000 MEGR-164-6/35 3/4 FNPT x 3/4 FNPT ,600,000 MEGR-164-6/36 Adj. High Pressure Regulator ,200,000 MEGR-164-6/ ,300,000 Type Max Inlet Pressure Inlet Outlet Outlet Adj. Range (PSI) 5 MEGR Fixed MEGR Fixed 10 MEGR Fixed 20 MEGR Fixed 30 MEGR Compact 50 MEGR Compact 250 PSIG 1/4 FNPT 1/4 FNPT 80 MEGR-350 Adjustable 0-10 MEGR Adjustable 0-20 MEGR Adjustable 0-30 MEGR-351 Adj. (Full Flow POL) 0-10 MEGR-360 Adj. (Black F. QCC) PSI 1,200,000 MEGR Pre-Set at 20 PSIG A MEGR-164 Series MEGR-164 Series - Offers a wide selection of available pressure ranges. High pressure regulators are typically used to reduce tank pressure to an intermediate pressure for use by another regulator. They may be used as high pressure regulators on distribution systems when used in conjunction with first stage downstream regulators. When equipped with an integral relief valve (MEGR-164SR Series), the regulator may be used as a final stage regulator on high pressure systems. It may also be used as a first stage regulator when set at 10 PSIG or less. The 1/4 FNPT tapped side outlet can be used to install a pressure gauge or a hydrostatic relief valve. This series contains brass materials that are not compatible with anhydrous ammonia service. TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSI; Inlet Connection: 1/2 FNPT or 3/4 FNPT; Outlet Connection: 1/2 FNP or 3/4 FNPT; Exterior Finish: Gray urethane; Regulator Spring: Steel; Stem Guide/Disk Holder: Stainless steel; Diaphragm: Fabric reinforced nirile (NBR); Bonnet/Body Material; Cast aluminum; Vent: Non-aluminum; Listings: UL Listed/UL 144. The MEGR-130 Series Fixed High Pressure Single Stage Regulators provide an economical solution for pounds to pounds service applications and regulates air and LP gas. Regulators must be installed in compliance with federal, state or local codes, or laws in accordance with NFPA 58. MEGR-350 Single Stage, Adjustable High Pressure Regulator. The body and bonnet of both the fixed and adjustable regulators are precisely machined and feature a crimped design and fabric reinforced rubber diaphragm creating a positive seal for leak-free performance. MEGR-360 Type I (QCC) is designed for appliances such as turkey fryers, camp stoves and torch applications that require pounds to pounds pressure instead of inches water column. They meet or exceed most requirements on a specific outlet setting (0-10 PSI) depending on the application. MEGR-350 Adjustable 0-10 PSIG TECHNICAL SPECIFICATIONS: Type: Adjustable or fixed/psi; Max. Inlet Pressure: 250 PSIG (17,2 bar); Orifice Diameter: ; Exterior Finish: Red anodized; Diaphragm: Fabric reinforced Buna N; Bonnet/Body Material: Die Cast Zinc; Listings: UL Listed/UL 144 High Pressure Regulator Type Inlet (1 Port) / Outlet Pressure Maximum Inlet Outlet (3 Ports) Range Pressure (PSIG) MEGR-11301F Adjustable 1/4 FNPT ,500 MEGR-11301F The MEGR-11301F is a reliable and accurate regulator making it ideal for numerous high pressure applications. This multi-purpose regulator can be used as a pilot supply or pressure-loading regulator where high pressure operating medium must be reduced for use by gas regulator pilots or pressure-loaded regulators. Its rugged design and multiple outlet ports offer versatility for a wide variety of applications. TECHNICAL SPECIFICATIONS: Type: Adjustable/PSI; Max. Inlet Pressure: 5,500 PSIG; Exterior Finish: Brass; Bonnet/Body Material: Brass; Bottom Cap and Spring Case: Brass; Gasket: Nitrile (NBR); Valve Spring: Stainless steel; Diaphragm: Stainless steel; Valve Disks: Nylon; Vent: 4 Holes (5/32 each); Temp. Rang: -40º F/225º F 11 12

10 REGULATORS REGULATORS Second Stage Low Pressure Industrial Excela-Flo Regulators Light Commercial Second Stage Excela-Flo Regulators A MEGR-CS1200 series Outlet Outlet Max BTU/H BTU/H Inlet/Outlet Orifice Pressure Pressure Operating LPG@ LPG@ Range Setting Inlet 25 PSI Inlet 10 PSI Inlet MEGR-CS1200IR6EC1 3/4 FNPT 1/2 2,100,000 1,600,000 MEGR-CS1200IR6EC3 1 FNPT 1/2 11 WC 2,500,000 1,900,000 MEGR-CS1200IR6EC6 1-1/4 FNPT 1/ WC 3,100,000 2,800,000 MEGR-CS1200IR7EC1 3/4 FNPT 5/16 ~1,250,000 ~985,000 7 WC 25 PSIG MEGR-CS1200IR7EC3 1 FNPT 5/16 ~1,620,000 ~1,525,000 MEGR-S1202G-BNC 1-1/2 FNPT 1 11 WC 14,700,000 10,800, WC MEGR-S1202G-CNC 2 FNPT 1 11 WC 30,000,000 23,000,000 MEGR-S1202H-CNK 2 FNPT PSI 2 PSI 22,200,000 10,300,000 NOTE: Other configurations and materials available upon request. ~ Flow Rates listed in BTU Natural Gas WC = Water Column Capacity in Outlet Adj. Outlet Set Inlet Outlet BTU/HLPG* Range (PSI) Point (PSI) MEGR-1HSRL-BFC 2,000,000 3/4 FNPT 3/4 FNPT MEGR-1HSRL-CFC 2,500,000 1 FNPT 1 FNPT *Based on 10 PSIG inlet pressure and 20% droop. MEGR-1HSRL Series: These light commercial second stage regulators are used to reduce outlet pressures from first stage regulators (normally 10 PSI) to 11 WC. They offer a full size, high capacity light commercial type regulator with a heavy duty cast iron body with a universal body to bonnet union for fast relocation of inlet to outlet vent location. MEGR-1HSRL Series TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 40 PSIG; Exterior Finish: Gray powder coat; Diaphragm: Fabric reinforced (NBR); Relief Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast aluminum/cast iron; Orifice Size: 3/8 A MEGR-S1202 Series The MEGR-S1202/MEGR-CS1200 Series commercial/industrial regulators are large capacity, low pressure second stage units for installation at schools, bakeries, and similar applications. They contain a limited capacity internal relief valve and can be used in conjunction with either MEGR-1627 Series or MEGR-1630 Series high-pressure regulators. For high capacity installations, the MEGR-1289H Series relief valve is required to be installed in the downstream system. TECHNICAL SPECIFICATIONS: Type: Adjustable/inches WC or PSI; Max. Inlet Pressure: 25 PSIG (17,2 bar); Orifice Diameter: 3/8, 5/16, 1/2 or 1 ; Exterior Finish: Gray powder coat; Body Material: Cast iron; Regulator Spring: Music wire; Spring Case/Stem Guide/ Disk Holder: Aluminum; Disk/Diaphragm and O-ring: Fabric reinforced Nitrile (NBR); Closing Cap Gasket: Neoprene Second Stage Commercial/Industrial Excela-Flo Regulators Inlet/Outlet Orifice Range of Adjustment NOTE: Other configurations available upon request Outlet Set Point 10 PSI Inlet BTU/H 20 PSI Inlet MEGR-1133H-2 Second Stage Regulator 2 FNPT PSI 2 PSI 27,405,000 52,700,000 MEGR-1133H-3 Second Stage Regulator 2 FNPT PSI 5 PSI 22,300,000 41,600,000 MEGR-1133L-4 Second Stage Regulator 2 FNPT WC 14 WC 45,600,000 77,100,000 MEGR-1133L-6 Second Stage Regulator 2 FNPT PSI 2 PSI 46,700,000 77,100,000 Low Pressure Single Stage Excela-Flo Regulators The MEGR-230 Single-Stage Regulators are approved for use in small portable applications and outdoor cooking appliances utilizing low pressure. Single stage regulators are not approved for RV use. Outlet Pressure Setting Vent Orientation 90 MEGR-218 Single Stage Regulator - SN FF POL w/ Plastic Handwheel x 3/8 FNPT - 90 Vent MEGR-230 Single Stage Regulator - 1/4 FNPT Inlet X 3/8 FNPT Outlet Over Outlet MEGR Single Stage Regulator - SN.9 GPM Excess Flow POL Inlet x 3/8 FNPT Outlet Over Outlet 11-inches w.c. MEGR Single Stage Regulator - 1/4 FNPT Inlet X 3/8 FNPT Outlet - 90 Vent 90 (27 mbar) MEGR Single Stage Regulator - Black F. QCC Inlet x 3/8 FNPT Outlet - 90 Vent 90 MEGR Single Stage Regulator - Black F. QCC Inlet (100,000 BTU/ H) x 3/8 FNPT Outlet Over Outlet MEGR-231 Single Stage Regulator - Hardnose FF POL Inlet x 3/8 FNPT Outlet - 90 Vent 90 The MEGR-1133 Series Second Stage Industrial Regulator is a manual, direct acting, self-operating, spring loaded, adjustable regulator. It is used in applications where pressure reduction is required. The regulator will reduce the risk of shock from abrupt changes of downstream conditions. This can help prevent safety equipment from shutting an operation down. The MEGR-1133 is equipped with external pressure registration; an external control line is needed to connect the output pressure port with the diaphragm chamber. The MEGR-1133 utilizes a balance diaphragm to reduce the effects of supply pressure changes on the output pressure. The external pressure registration of the standard MEGR-1133 also allows it to be used as a monitor regulator. MEGR MEGR-231 MEGR-1133 Series TECHNICAL SPECIFICATIONS: Type: Adjustable/PSI/WC; Max. Inlet Pressure: 60 PSIG; Exterior Finish: Gray powder coat; Body Material: Iron; Orifice Material: Aluminum; Regulator Spring: Steel; Stem Guide/Disk Holder: Aluminum; Diaphragm: Fabric reinforced Nitrile (NBR); Valve Stem: Aluminum; Bonnet Cap and Bonnet: Aluminum MEGR-230 Series TECHNICAL SPECIFICATIONS: Orifice Diameter: Diameter; BTU Capacity: 140,000 BTU (based on 25 PSI 9 WC delivery pressure); Max. Inlet Pressure: 250 PSI; Inlet Connection: 3/8 FNPT; Exterior Finish: Green wet coat; Diaphragm: Molded with O-ring bonnet/body seal; Bonnet/Body Material: Die cast aluminum; Listings: UL Listed/UL 144; Mounting Holes: 3-1/2 on center 13 14

11 REGULATORS REGULATORS A Pressure Reducing Regulators Inlet x Outlet Orifice Sizes, Outlet Pressure Ranges, Vent BTU/H Outlet Pressure Setting Connection Style Inches (mm) Inches WC (mbar) Orientation 100 PSI Inlet MEGR-1912/101 1/4 x 3/8 FNPT (1,8) 11-inches WC (27 mbar) (23-32) 242,953 MEGR-1912/104 1/4 x 1/4 FNPT (1,8) 11-inches WC (27 mbar) (23-32) 242,953 MEGR-1912/109 1/4 x 3/8 FNPT (1,8) 7-inches WC (17 mbar) 5-10 (12-25) 242,953 MEGR-1912/197 1/4 x 3/8 FNPT (2,4) 20-inches WC (50 mbar (30-60) 313,488 MEGR-1912H/108 1/4 x 3/8 FNPT (2,4) 1.5 PSI (103 mbar) PSI ( mbar) Over Outlet 297,814 MEGR-1912H/520 1/4 x 1/4 FNPT (2,4) 3.5 PSI (241 mbar) PSI ( mbar) MEGR-1912H/534 1/4 x 1/4 FNPT (1,8) 1.5 PSI (103 mbar) PSI ( mbar) MEGR-1912N/113 1/4 x 3/8 FNPT (1,8) 5-inches WC (27 mbar) 3-7 (7-17) MEGR-1912N/194 1/4 x 1/4 FNPT (1,8) 5-inches WC (27 mbar) 3-7 (7-17) *NOTE: Other configurations and materials available upon request. The MEGR-1912 Series UL Listed regulators are direct-operated, spring-loaded models designed for use in a variety of service and industrial applications. These regulators have limited capacity internal relief across the diaphragm to help minimize over pressurization. The MEGR-1912 Series, with capacity ratings of less than 320,000 BTU/HR (129 scfh), are often used on small portable outdoor appliances. The MEGR-291L Compact Integral Two Stage 2 PSI Low Capacity Regulator is specifically intended for application with low BTU demands but still require two stage regulation. The Model MEGR-291L is ideally suited for RV, manufactured homes, cabins or other applications with one appliance or low BTU multiple appliance applications while still permitting maximum range of output pressure adjustment. The MEGR-300 Compact Integral Two Stage 2 PSI Regulator is ideally suited for installations to reduce tank pressure to a nominal 2 PSI outlet pressure. 2 PSI systems typically incorporate a line service regulator within the home that further reduces the 2 PSI system pressure to approximately 11 WC prior to the appliance. (Red bonnet identifies 2 PSI model). MEGR-291, MEGR-291H and MEGR-300 Series meet UL, RVIA and NFPA requirements. TECHNICAL SPECIFICATIONS: Max. Inlet Pressure: 250 PSI; Inlet Connection: 1/4 FNPT; Exterior Finish: Raw zinc/powder coated; Diaphragm: Fabric reinforced molded with O-ring bonnet/body seal; Diaphragm Type: Internal relief - spring-loaded; Bonnet/Body Material: Die cast zinc; Listings: UL Listed/UL 144; Mounting Holes: 3-1/2 on center; Pressure Taps: 1/8 FNPT Plugged MEGR-291H MEGR-295 A MEGR-1912 Series Underwriters Laboratories requires horizontally mounted regulators to be installed with vent opening protection to prevent blockage by freezing rain. TECHNICAL SPECIFICATIONS: Type: Single stage; Max. Inlet Pressure: 250 PSI; Vent Screen: Monel; Gasket: CGR 2750; Relief Valve: Brass and zinc; Control and Relief Valve Spring: Plated steel; Diaphragm Assembly: Nitrile (NBR) with zinc disk; Spring Case: Die cast zinc; Spring Seat: Plated steel; Diaphragm Plate: Plated steel; Body Material/Lower Casting: Die cast zinc; Listings: UL Listed/UL 144 MEGR-298L Compact Integral Two Stage Excela-Flo Regulators BTU/H LPG@ 30 PSI Inlet* MEGR-291 1/4 FNPT Inlet x 3/8 FNPT Outlet 175,000 MEGR-298 1/4 FNPT Inlet x 3/8 FNPT Outlet - 90 Vent 175,000 MEGR-295 HN Excess Flow POL Inlet x 3/8 FNPT Outlet - 90 Vent 175,000 MEGR Green Type I QCC Inlet x 3/8 FNPT Outlet 175,000 MEGR Green Type I QCC Inlet x 3/8 FNPT Outlet - 90 Vent 175,000 MEGR-291H High Capacity Regulator 1/4 FNPT Inlet x 3/8 FNPT Outlet 225,000 MEGR-291L Low Capacity Regulator 1/4 FNPT Inlet x 3/8 FNPT Outlet 120,000 MEGR-298H High Capacity Regulator 1/4 FNPT Inlet x 3/8 FNPT Outlet - 90 Vent 225,000 MEGR-298L Low Capacity Regulator 1/4 FNPT Inlet x 3/8 FNPT Outlet - 90 Vent 120,000 MEGR-291H High Capacity Regulator Green Type I QCC Inlet x 3/8 FNPT Outlet 225,000 MEGR PSI Regulator 1/4 FNPT Inlet x 3/8 FNPT Outlet 225,000 MEGR PSI Regulator 1/4 FNPT Inlet x 3/8 FNPT Outlet - 90 Vent 225,000 *BTU/H 20% Droop MEGR-291 and MEGR-291H Setpoint: 100 PSIG 11 WC Outlet 30 SCFH Air MEGR-300 Setpoint: 100 PSIG 2 PSI Outlet 30 SCFH Air Accessories MEGR-900 (Z-Bracket) MEGR-861 (First Stage Cover) MEGR-862 (Second Stage Cover) MEGR-300 The MEC MEGR-291 Two Stage Regulators are approved for use in nearly all portable applications and outdoor cooking appliances utilizing low pressure. They feature all zinc body construction, high and low 1/8 NPT pressure tap ports, an integral second stage drip lip vent and optional standard or 90 degree vent locations. MEGR-291 The MEGR-291H High Capacity Compact Integral Two Stage Regulator is ideal for high demand RV, outdoor appliances, seasonal homes, gas fire places, water heaters, ranges or other moderate to low demand domestic home installations. (Green bonnet identifies high capacity model)

12 REGULATORS REGULATORS Liquid Backpressure Regulator/Relief Valve Excela-Flo Pilot Operated/Industrial Regulators A MEGR-198H Relief Capabilities GPM/LPG Relief Pressure Outlet PSIG Inlet/Outlet PSIG (BAR) (BAR) 10 PSI Over 50 PSI Over Set Point Set Point MEGR-198H-22 3/4 FNPT 100 (6.9) ( ) MEGR-198H-30 1 FNPT 100 (6.9) ( ) MEGR-198H-31 1 FNPT The MEGR-198H Series Liquid Service Valves are direct-operated relief valves for use on relief and back pressure applications involving large LP-Gas pumping systems and vaporizers. Internal pressure registration eliminates the need for a control line. TECHNICAL SPECIFICATIONS: Type: Adjustable/PSI; Max. Inlet Pressure: 250 PSIG; Exterior Finish: Gray powder coat; Regulator Spring: Plated steel; O-ring Seat: Nirile (NBR); Diaphragm: Neoprene; Body Material/Spring Case: Iron MEGR-1289 Series Excela-Flo Vapor Backpressure Regulator/Relief Valves Inlet/Outlet Max. Inlet Set Point SCFH/ Set Point PSIG Range Propane MEGR-1289H/1 2 FNPT 25 9 WC 7-18 WC 55,000 MEGR-1289H/2 2 FNPT 25 1 PSIG PSIG 55,500 MEGR-1289H/3 2 FNPT 25 3 PSIG PSIG 58,000 MEGR-1289H/4 2 FNPT 25 6 PSIG 4-10 PSIG 58,500 MEGR-1289H/5 2 FNPT PSIG PSIG 61,000 MEGR-1289H/41 1 FNPT PSIG PSIG 45,500 MEGR-1289H/42 1 FNPT PSIG 4-15 PSIG 46,000 MEGR-1289H/43 1 FNPT PSIG PSIG 48,000 MEGR-1289H/49 1 FNPT PSIG PSIG 49,000 MEGR-1289HH-1 1 FNPT PSIG PSIG 50,000 MEGR-1290H/43 3/4 FNPT X 1 FNPT PSIG PSIG 40,000 MEGR-1290H/49 3/4 FNPT X 1 FNPT PSIG PSIG 50,000 Note: Other configurations and materials available upon request. Inlet/Outlet Maximum Orifice Range of Pressure Adjustment Point Outlet Set Inlet BTU/H PSI MEGR P /8 7 WC-2 PSI 1 48,825,000 MEGR P Pilot Operated /8 1-5 PSI 5 55,125,000 MEGR P Low Pressure / PSI 10 61,425,000 Regulator MEGR P / PSI 15 63,000,000 MEGR P 250 7/8 7 WC-2 PSI 1 29,295,000 MEGR P 250 7/8 1-5 PSI 5 33,075,000 MEGR P 250 7/ PSI 15 37,800,000 MEGR P Pilot Operated 250 7/ PSI 10 36, MEGR P High Pressure 2 FNPT 250 7/ PSI 20 40,950,000 Regulator MEGR P 250 7/ PSI 30 44,100,000 MEGR PH /8 1-5 PSI 5 55,125,000 MEGR PH / PSI 10 61,425,000 MEGR PH / PSI 15 63,000,000 MEGR PH / PSI 20 67,725,000 MEGR PH Monitor Pilot / PSI 30 74,025,000 MEGR-199M-504PH Operated High / PSI 15 42,650,000 MEGR-199M-505PH Pressure Regulator / PSI 20 67,725,000 MEGR-199M-901PH / PSI 30 74,025,000 Capacity based on inlet pressures 20 PSIG greater than outlet pressure set point and 20% droop. The MEGR-199 Series Industrial Regulators are large capacity, pilot operated, low or high pressure units for use in applications with loads demanding up to 75,000,000 BTU/H capacity. These regulators are best suited for industrial applications where high flow capacity and a downstream monitor control line can be applied. The MEGR-199 series provides exceptional downstream control while operating at very high capacities with minimal droop under varying flow and inlet pressures. TECHNICAL SPECIFICATIONS: Type: Adjustable/PSI/WC; Max. Inlet Pressure: PSIG; Exterior Finish: Gray powder coat; Orifice Material: Stainless Steel; Regulator Spring: Steel; Diaphragm: Steel, Fabric Reinforced Nitrile (NBR); Body Material: Iron; Bonnet Cap & Bonnet: Iron A The MEGR-1289H Series Relief Valve is available in settings ranging between 1-75 PSIG for the 3/4 and 1 models and 7 WC to 15 PSI for the 2 models. This series is a throttling relief valve used downstream of pressure regulators to protect the downstream system from overpressure. A smooth throttling action minimizes pressure surges in the system during emergency operation. This unit features a pilot tube booster to achieve the highest possible relief capacity with a minimum buildup of system pressure. MEGR-199 Series The MEGR-1289H Series relief valve is installed between large second stage regulators and the burner to provide high capacity relief. They are ideal for low pressure settings due to the increased sensitivity provided by the large diaphragm area and are suitable as a pressure high capacity relief device when installed between a first and second stage regulator. TECHNICAL SPECIFICATIONS: Type: Adjustable/PSI/WC; Max. Inlet Pressure: 100 PSIG (1 Body), 25 PSIG (2 body); Exterior Finish: Gray powder coat; Diaphragm: Fabric Reinforced Nitrile (NBR); Bonnet/Body Material: 1 - All Aluminum, 2 - Aluminum Bonnet/Iron Body 17 18

13 REGULATORS REGULATORS Excela-Flo Regulator Accessories Flex-Vent Regulator Kit A MEGR-861 MEGR-861 MEGR-862 MEGR-900 MEGR-RVB MEGR-100C First Stage Regulator Cover for MEGR-291 and MEGR-300 Series Regulators Second Stage Cover for MEGR-253, MEGR-291 & MEGR-300 Series Regulators Z-Mounting Bracket for MEGR-253 and MEGR-291 Series Regulators L-Mounting Bracket for MEGR-253 Series Regulators Universal Slotted H Style Bracket for Both Full Size and Compact Domestic Regulators ME MEC Flex-Vent Kit - Fixed Ends - 3 ft. ME MEC Flex-Vent Kit - Fixed Ends - 4 ft. ME MEC Flex-Vent Kit - Fixed Ends - 6 ft. ME MEC Flex-Vent Kit - Universal Outlet (not crimped) - 10 ft. ME C MEC Flex-Vent Kit - Universal Outlet (crimped) - 10 ft. *Custom lengths available upon request. 90 Regulator Vent Assembly ME900-6 The MEC Flex-Vent provides a safe and easy solution to vent LP Gas regulators away from open sources of ignition or other potential fi re hazards. Meets all requirements of the new flexible material allowance in the 2011 NFPA-58, section (3). Durable, UV stable flexible PVC hose material suitable for use with LP Gas vapor 3/4 NPT swivel inlet for easy installation Mounting clamps and coated masonry screws supplied Crimped ends for maximum durability ME900-6 A MEGR-862 MEGR-900 Standard 90 vent assembly with screen Available in 3, 4, 6 and 10 ft. lengths* MEGR-100C MEGR-RVB For more information on Marshall Excelsior products or installation instructions contact your MTankCo. representative or go to ME960 Series 19 20

14 REGULATORS REGULATORS First Stage Regulators CAVAGNA GROUP Second Stage Regulators with Incorporated Dielectric Union CAVAGNA GROUP A 984HP Type 988HP Type Capacities in BTU\HR Outlet Adj. Range Outlet Pressure Inlet Outlet (SCMH) propane PSIG (bar) Setting, PSIG (bar) 984HP ,000,000 (11.26) 1/4 NPT 1/2 NPT No adjustment 10 (0.69) 988HP ,000,000 (22.51) 1/2 NPT 1/2 NPT 4-6 ( ) 988HP ,000,000 (22.51) POL 3/4 NPT 4-6 ( ) 5 (0.34) 988HP ,250,000 (25.33) POL 3/4 NPT 4-6 ( ) 988HP ,100,000 (23.64) 1/2 NPT 1/2 NPT 8-12 ( ) 988HP ,400,000 (27.01) 3/4 NPT 3/4 NPT 8-12 ( ) 10 (0.69) 988HP ,100,000 (23.64) POL 1/2 NPT 8-12 ( ) 988HP ,250,000 (25.33) POL 3/4 NPT 8-12 ( ) The 984HP and 988HP First Stage Regulators reduce the inlet pressure to a medium level to feed a second stage regulator. The 984HP and 988HP regulators are designed for Type A installations or for installations Type C. They have to be used outdoors in correct mounting position with vent-hole turned downwards. In their standard version, the 984HP regulators are delivered with vent-hole turned in line with the outlet fitting. TECHNICAL SPECIFICATIONS: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: ; Cover Screws: Stainless steel; Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 100 PSIG, 140,000 BTU, outlet pressure 10 PSIG; Provided Flows: Flow based on 25 PSIG (1,725 Bar) inlet pressure and 20% drop (in accordance with UL144 standard) Second Stage Regulators CAVAGNA GROUP Capacities in BTU\HR Outlet Pressure Outlet Pressure Inlet Outlet (SCMH) Propane WC (bar) Setting, WC (bar) 988LP ,000 (9.01) 998LP /2 NPT 998LP ,000,000 (11.26) 1/2 NPT 998LP - 41* 998LP ,400,000 (15.76) 3/4 NPT (27) 998LP - 32 (22-32) 3/4 NPT 998LP ,000 (10.36) 3/4 NPT LAT 998LP /2 NPT 998LP - 42* 1,000,000 (11.26) 3/4 NPT 90 3/4 NPT 998LP TP ,000 (7.88) 1/2 NPT 1/2 NPT Non-adjustable 998TP ,680,000 (18.91) 3/4 NPT 3/4 NPT 998TP ,500,000 (16.88) 3/4 NPT TP ,460,000 (16.43) 1/2 NPT 1/2 NPT *Vent-hole in line with the outlet fitting PSIG ( bar) 2 PSIG (0.14 bar) The Guardian KOSAN+ Regulator incorporates a dielectric insulation and is an all-in-one solution. There is no need to buy separate dielectric unions. In Accordance with NFPA 58: Underground metallic piping, tubing, or both that convey LP-Gas from a gas storage container shall be provided with dielectric fittings at the building to electrically isolate it from the above ground portion of the fixed piping system that enters a building. Such dielectric fitting shall be installed above ground and outdoors. 998LP Type A 988LP Type 998LP Type Capacities in BTU\HR Outlet Pressure Outlet Pressure Inlet Outlet (SCMH) Propane WC (bar) Setting, WC (bar) 988LP LP ,000 (9.01) 1/2 NPT 998LP ,000,000 (11.26) 1/2 NPT 998LP LP - 28* 1,400,000 (15.76) 3/4 NPT 998LP /4 NPT 998LP ,000 (10.36) 3/4 NPT LAT 998LP /2 NPT 998LP ,000,000 (11.26) 3/4 NPT LP - 29* 3/4 NPT 998LP /4 NPT 2,300,000 (25.89) 998LP NPT 1 NPT *Vent-hole in line with the outlet fitting (22-32) 11 (27) The 988LP Series Regulator reduces the pressure coming from a first stage regulator directly to the inlet pressure of the user appliance or to a medium pressure value in case of installations with pressure governors. These regulators are designed for Type A installations and are to be used outdoors in correct mounting position with vent-hole turned downwards. In the standard version these regulators are delivered with vent-hole in line with the inlet fitting. Three other configurations of the inlet and outlet fittings for the 998 LP model are available: Back Mount 998 LP-03, 998 LP-04 and 998LP-29 Angle Body 998 LP-05 In line inlet and outlet Flange 998 LP-09 and 998LP-10 TECHNICAL SPECIFICATIONS: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: 5-15 PSIG; Cover and Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 10 PSIG, 140,000 BTU, outlet pressure 11 inch WC; Provided Flows: Flow based on 10 PSIG (0.69 bar) inlet pressure and 20% drop (in accordance with UL144 standard) TECHNICAL SPECIFICATIONS FOR LP TYPE: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: 5-15 PSIG; Cover and Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 10 PSIG, 140,000 BTU, outlet pressure 11 inch WC; Provided Flows: Flow based on 10 PSIG (0.69 bar) inlet pressure and 20% drop (in accordance with UL144 standard) TECHNICAL SPECIFICATIONS FOR TP TYPE: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: 5-15 PSIG; Cover and Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 10 PSIG, 140,000 BTU, outlet pressure 2 PSIG; Provided Flows: Flow based on 10 PSIG (0.69 bar) inlet pressure and 20% drop (in accordance with UL144 standard) Twin Stage Regulators CAVAGNA GROUP Capacities in BTU\HR Outlet Pressure Outlet Pressure Inlet Outlet (SCMH) Propane WC (bar) Setting, WC (bar) 988TW /2 NPT 988TW - 16* 750,000 (8.44) 998TW /4 NPT 998TW ,400,000 (15.76) 998TW - 12* 3/4 NPT 988TW TW ,000 (8.44) 988TW - 18* POL 1/2 NPT 998TW (22-32) 11 (27) 998TW TW - 14* 1,400,000 (15.76) 3/4 NPT 988TW ,000 (16.43) PSIG 2 PSIG (0.14 bar) bar) 1/4 NPT 3/4 NPT PSIG 998TW ,460,000 (16.43) 2 PSIG (0.14 bar) ( bar) *First and Second Stage spring case vents opposite gauge taps. 988TW Type 21 22

15 REGULATORS REGULATORS Twin Stage Regulators (continued) CAVAGNA GROUP 2-PSIG Regulators CAVAGNA GROUP A 998TW Type The 998TW Type Double Stage Regulator (Twin Stage) consists of two regulation levels, which regulates the inlet pressure, coming from the withdrawal cylinder or tank directly to the inlet pressure of the user appliance. 988 TW Type regulators are designed for Type B installation. They are to be used outdoors in correct mounting position with vent-hole turned downwards. TECHNICAL SPECIFICATIONS: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: PSIG; Cover and Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 10 PSIG, 140,000 BTU, Outlet pressure: 11 inch WC; Provided Flows: Flow based on 10 PSIG (0.69 bar) inlet pressure and 20% drop (in accordance with UL144 standard); 988TW Type Dimensions: L x W 4.33 x H 4.94; 988TW Type Weight: oz.; 998TW Type Dimensions: L x W x H 4.964; 998TW Type Weight: oz. Automatic Changeover Regulators - 524AC Type CAVAGNA GROUP Capacities in BTU\HR Outlet Adjustment Outlet Pressure Inlet Outlet (SCMH) Propane Range PSIG (bar) Setting, PSIG (bar) 988TP ,000 (7.88) 1/2 NPT 1/2 NPT 998TP ,680,000 (18.91) 3/4 NPT /4 NPT 998TP ,500,000 (16.88) 3/4 NPT 90 ( ) 998TP ,460,000 (16.43) 1/2 NPT 1/2 NPT 2 (0.14) 988 TP Regulators are designed for Type C of installations. They are to be used outdoors in correct mounting position with vent-hole turned downwards. In the standard version 988 TP regulators are delivered with the vent-hole turned in line with the outlet fitting. There is a special configuration of inlet and outlet fittings for the 998 TP model: Back Mount 998 LP-07 TECHNICAL SPECIFICATIONS: Body and Cover: Aluminium; Diaphragm: Reinforced; Supplying Pressure: 5-15 PSIG; Cover and Inlet Fitting Screws: Stainless Steel; Gas Type: Propane; Setting Point: Inlet Pressure 10 PSIG, 140,000 BTU, Outlet Pressure: 2 PSIG; Provided Flows: Flow based on 10 PSIG (0.69 bar) inlet pressure and 20% drop (in accordance with UL144 standard) 988TP Type L x W 4.33 x H 4.94 A Capacities in BTU\hr (SCMH) Propane Inlet Outlet Vent Size 524AC 600,000 (6.75) 1/2 NPT 3/4 NPT 528B 450,000 (5.07) 1/4 Inverted Flare 3/8 NPT 3/8 NPT 924N 160,000 (1.80) 3/8 NPT 998TP Type L x W x H AC Type 528B Type The Double Stage Automatic Changeover Regulator 524 AC is a combination of an automatic changeover working as a first stage coupled to a second stage regulator. The regulator body is made of zinc alloy and it is necessary to use the proper plastic mounting bracket. Please contact your sales representative for additional information. 524 AC TYPE TECHNICAL SPECIFICATIONS: Body and Cover: ZAMAK; Diaphragm: Reinforced; Supplying Pressure: PSIG; Cover Screws: Stainless steel; Fittings: Brass; Gas: Propane; Setting Point: Inlet pressure 100 PSIG, 140,000 BTU, outlet pressure: 11 WC; Provided Flows: Flow based on 25 PSIG (1.725 bar) inlet pressure and 20% drop (in accordance with UL144 standard); Dimensions: L x W x H B TYPE TECHNICAL SPECIFICATIONS: Body and Cover: ZAMAK; Diaphragm: Reinforced; Supplying Pressure: PSIG; Fittings: Brass; Gas: Propane; Setting Point: Inlet pressure 100 PSIG, 140,000 BTU, outlet pressure: 11 WC; Provided Flows: Flow based on 25 PSIG (1.725 bar) inlet pressure and 20% drop (in accordance with UL144 standard); Dimensions: L x W x H POL Double Stage Capacities in BTU\HR (SCMH) Propane Inlet Outlet 524AS 160,000 (1.80).880 POL 3/8 NPT CAVAGNA GROUP TECHNICAL SPECIFICATIONS: Type: ASME double stage regulator; Body and Cover Material: ZAMAK; Diaphragm: Reinforced; Supplying Pressure: PSIG; Fittings: Brass; Gas: Propane; Setting Point: Inlet pressure 100 PSIG, 70,000 BTU, outlet pressure: 11 WC; Provided Flows: Flow based on 25 PSIG (1.725 bar) inlet pressure and 20% drop (in accordance with UL144 standard); Dimensions: L x W 3.11 x H AS Type 924N TYPE TECHNICAL SPECIFICATIONS: Body and Cover: ZAMAK; Supplying Pressure: PSIG; Fittings: Brass; Gas: Propane; Setting Point: Inlet pressure 100 PSIG, 70,000 BTU, outlet pressure: 11 WC; Provided Flows: Flow based on 25 PSIG (1.725 bar) inlet pressure and 20% drop (in accordance with UL144 standard); Dimensions: L x W 3.11 x H N Type 23 24

16 REGULATORS REGULATORS Governor Regulator - Type 90/2-PSIG - Pressure Drop CAVAGNA GROUP Governor Regulators - Type 95/2-PSIG - Pressure Drop CAVAGNA GROUP Pressure 7.0 PSIG= 1/2 PSIG= 3/4 PSIG= 1 PSIG= Drop 17 mbar 34.5 mbar 52 mbar 69 mbar Flow Rate CFH (m3/h) (4.3) (6.1) (7.8) (8.7) Pressure Drop sp gr gas expressed in CFH (m3/h) Pressure 7.0 PSIG= 1/2 PSIG= 3/4 PSIG= 1 PSIG= Drop 17 mbar 34.5 mbar 52 mbar 69 mbar Flow Rate CFH (m3/h) (10.1) (14.3) (17.7) (20.3) Pressure Drop sp gr gas expressed in CFH (m3/h) A Type 90 / 2-PSIG Governor Regulator - Type 90/2-PSIG - Capacities Model Flow Rate CFH (m3/h] CAVAGNA GROUP Outlet 1/2 PSIG= 3/4 PSIG= 1 PSIG= 2 PSIG= 5 PSIG= Pressure 34.5 mbar 52 mbar 69 mbar 138 mbar 345 mbar 6 WC 160 (4.5) 200 (5.6) 235 (6.6) 285 (8.0) 350 (9.8) 7 WC 155 (4.3) 200 (5.6) 230 (6.4) 280 (7.8) 345 (9.7) 8 WC 155 (4.3) 195 (5.5) 230 (6.4) 270 (7.6) 335 (9.4) 9 WC 145 (4.1) 190 (5.3) 215 (6.0) 260 (7.3) 325 (9.1) 10 WC 135 (3.8) 180 (5.0) 205 (5.7) 245 (6.7) 310 (8.7) 11 WC 125 (3.5) 170 (4.8) 195 (5.5) 235 (6.6) 300 (8.4) 12 WC 125 (3.5) 165 (5.5) 195 (5.5) 230 (6.4) 295 (8.3) Capacities based on 1 WC pressure drop from set point 0.64 sp gr gas expressed in CFH (m3/h) Governor Regulators - Type 95/2-PSIG - Capacities Model Outlet 1/2 PSIG= 3/4 PSIG= 1 PSIG= 2 PSIG= 5 PSIG= Pressure 34.5 mbar 52 mbar 69 mbar 138 mbar 345 mbar 7 WC 364 (10.3) 403 (11.4) 447 (12.7) 517 (14.6) 645 (18.3) 8 WC 359 (10.2) 394 (11.2) 447 (12.7) 509 (14.4) 636 (18.0) 95 9 WC 342 (9.7) 381 (10.8) 430 (12.2) 500 (14.2) 636 (18.0) 10 WC 329 (9.3) 377 (10.7) 403 (11.4) 496 (14.0) 627 (17.8) 11 WC 302 (8.5) 360 (10.2) 372 (10.5) 473 (13.4) 614 (17.8) CAPACITIES based on 1 WC pressure drop from set point 0.64 sp gr gas expressed in CFH (m3/h) Governor Regulators - Type 95/2-PSIG - Conversion Table CAVAGNA GROUP CAVAGNA GROUP Type 95 / 2-PSIG A Governor Regulator - Type 90/2-PSIG - Conversion Table Model Item Pipe Inlet Number Size Pressure CAVAGNA GROUP Setting NG LPG PSIG WC PSIG WC PSIG WC /2 2 PSIG WC PSIG WC PSIG WC PSIG WC The Type 90 OARA Pressure Regulators are manufactured to supply the highest performances both as line pressure regulators and as gas appliance regulators. All models are approved by IAS, in accordance with the two different standards. Precise regulating control of both full flow and of tiny pilot flows Fulfills utility specifications for usage in residential, commercial and industrial applications All component parts are corrosion-resistant Diaphragm and washers are made of Nitrile rubber and are resistant to combustible gases Rubber works at ambient temperatures of - 40/205 F (-40/96 C) Rugged die-cast aluminium housings Regulators have vent limiter type thread 1/8 NPT which limits gas leakage in case of diaphragm rupture Manufacturing of the regulators in terms of balancing capacity guarantees excellent control of the outlet pressure TECHNICAL SPECIFICATIONS: Rated Inlet Pressure: 2 PSIG (138 mbar); Outlet Pressure Setting: Type WC; Type WC; Type WC; Type WC; Type WC.; Gases: Natural or LP gas; Code: The four digit code indicates the year and the calendar week, in which the regulator was manufactured; (i.e. 1012: in twelfth week of 2010); Ambient Temp. Range: -40/205 F (-40/96 C); Pipe size NPT: x ; Venting: Vent limiter /8 NPT; Emergency Exposure Limits: 65 PSIG (4.5 BAR) inlet side only; Dimensions: L x W x H 3.492; Weight: oz. Model Item Pipe Inlet Number Size Pressure Setting NG LPG PSIG WC /4 2 PSIG WC PSIG WC PSIG WC The Type 95 OARA Pressure Regulators are manufactured to supply the highest performances both as line pressure regulators and as gas appliance regulators. All models are approved by IAS, in accordance with the two different standards. Precise regulating control of both full flow and of tiny pilot flows Fulfills utility specifications for usage in residential, commercial and industrial applications Materials of all component parts are corrosion-resistant Diaphragm and washers are made of Nitrile rubber and are resistant to combustible gases Rubber is selected to work at the following ambient temperatures: - 40/205 F (-40/96 C) Rugged die-cast aluminium housing Brass vent limiter Regulators have vent limiter type thread 1/8 NPT which limits gas leakage in case of diaphragm rupture Manufacturing of the regulators in terms of balancing capacity guarantees excellent control of the outlet pressure TECHNICAL SPECIFICATIONS: Rated Inlet Pressure: 2 PSIG (138 mbar); Outlet Pressure Setting: Type WC.; Type WC.; Outlet Pressure Setting: Type at 200 CFH; Type at 200 CFH; Gases: Natural or LP gas; Code: The four digit code indicates the year and the calendar week, in which the regulator was manufactured (i.e. 1012: in twelfth week of 2010); Ambient Temp. Range: -40/205 F (-40/96 C); Pipe Size NPT: x / 1 x 1 ; Venting: Vent limiter /8 NPT; Emergency Exposure Limits: 65 PSIG (4.5 BAR) inlet side only; Dimensions: L x W x H 5.196; Weight: oz 25 26

17 REGULATORS REGULATORS Direct Operated Regulators - 942HP Type CAVAGNA GROUP Direct Operated Regulators - 49HP Type CAVAGNA GROUP A 942HP Type Inlet/Outlet Connection Outlet Pressure Setting (PSIG) Outlet Adjustment Range (PSIG) Capacity BTU/HR 942HP ,600, HP ,600,000 1/2 NPT 942HP ,200,000 Basic Regulator 942HP ,250, HP ,800,000 3/4 NPT 942HP ,500, HP ,600, HP - 02 With Internal 1/2 NPT ,000, HP - 03 Relief Valve ,600, HP /4 NPT ,800,000 The 94 Series Direct Operated Regulators are designed for high-pressure service and can be used on either on vapor or liquid applications. Outlet pressure ranges from PSIG. High pressure regulators reduce tank pressure to a lower pressure for use by another regulator. They may also be used for final stage service on specific applications such as high pressure burners or other medium sized commercial industrial applications. It is not equipped with limited relief valve. Type 9482HP Regulator is an adjustable high pressure regulator with a wide range of outlet pressures. It is equipped with a limited relief valve. Both types are equipped with a FNPT side outlet which is normally plugged and provides an opening for an outlet pressure. TECHNICAL SPECIFICATIONS: Body and Cover: Aluminum; Diaphragm: Reinforced; Supplying Pressure: PSIG; Cover Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 100 PSIG, 350,000 BTU, outlet pressure 20 PSIG; Provided Flows: Flow based on inlet pressure 20 PSIG (1.38 bar) greater than outlet with 20% drop (in accordance with UL144 standard); Dimensions: L 4.33 x W 4.72 x H 8.26 Outlet Outlet Capacity Pressure Adjustment BTU/HR Setting (PSIG) Range (PSIG) 492HP , HP ,000 Basic Regulator 492HP - 03 (Handwheel ,200, HP - 04 Adjustment) ,000, HP - 05* , HP , HP - 01 Basic Regulator , HP - 03 (Wrench ,200, HP - 04 Adjustment) ,000, HP - 05* , HP , HP - 01 Non-adjustable 15 Non-adjustable 400, HP , HP ,000 Dial Cap 495HP ,000 Adjustment 495HP ,200,000 *Inlet M POL The 49 Series Direct Operated Regulators are designed for high-pressure service and can be used on either vapor or liquid applications. Their outlet pressure ranges from PSIG. High pressure regulators usually reduce tank pressure to an intermediate pressure for use by another regulator. NOTE: 49 Series Regulators do not have internal relief valves, and can not be installed in fixed piping serving 0.5 appliance systems. The 492HP Regulator is an adjustable high pressure regulator with hand wheel adjustment. The 493HP Regulator is an adjustable high pressure regulator with wrench adjustment and 3 spring ranges from PSIG. The 494HP is a fixed high pressure regulator, has no field adjustment, and is very compact. Type 495HP Regulator is an adjustable high pressure regulator with a dial cap adjustment. This cap eliminates the need for a gauge on portable applications. Type 492 Type 493 Type 494 A Direct Operated Regulators - 81HP Type Orifice CAVAGNA GROUP Inlet/Outlet Outlet Pressure Outlet Pressure Capacity Connection Range (PSIG) Setting BTU/HR 812HP /8 3/4 NPT 6,100, HP /2 3/4 NPT 10,700, HP /2 1 NPT 10,700, HP - 02² 1/2 1 NPT 5-20 PSIG 10 PSIG 10,700, HP - 02³ 1/2 3/4 NPT 10,700, HP - 01³ 1/2 1 NPT 10,700, HP - 11¹ 3/8 3/4 NPT 6,100, HP /2 2 NPT 10,700,000 ¹ = Has Internal Relief ² = Fluorocarbon Trim (GLT Viton) ³ = w/monitoring Type 495 TECHNICAL SPECIFICATIONS: Body and Cover: Aluminum; Diaphragm: Reinforced; Supplying Pressure: PSIG; Cover Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 100 PSIG, 200,000 BTU, outlet pressure 20 PSIG; Provided Flows: Flow based on inlet pressure 20 PSIG (1.38 Bar) greater than outlet with 20% drop (in accordance with UL144 standard); Dimensions: L 2.56 x W 2.89 x H HP Type The 81 Series Direct Operated Regulators are designed for high-pressure service with large loads like factories, office buildings, etc. They reduce tank pressure to an intermediate pressure for use by another regulator. They are also used for final stage service on particular application (pounds to pounds). The 81HP series has a wide range of outlet pressures and can be equipped with a limited relief valve. They have a FNPT side outlet which is normally plugged and provides an opening for an outlet pressure gauge. Type 81 regulators can be equipped with Viton trim. For more information on Cavagna Group products or installation instructions contact your MTankCo. representative or go to TECHNICAL SPECIFICATIONS: Body and Cover: Aluminum; Diaphragm: Reinforced; Supplying Pressure: PSIG; Cover and Inlet Fitting Screws: Stainless steel; Gas Type: Propane; Setting Point: Inlet pressure 100 PSIG, 350,000 BTU, outlet pressure 10 PSIG; Provided Flows: Flow based on inlet pressure 20 PSIG (1.38 bar) greater than outlet with 20% drop (in accordance with UL144 standard); Dimensions: L 7.67 x W 4.72 x H

18 PIGTAILS & HOGTAILS PIGTAILS & HOGTAILS Copper Pigtails and Hogtails Bent Copper Pigtails and Hogtails A Long Nipple Short Nipple 1/4 Inverted Flare 1/4 MNPT Male Hard Nose POL x Male Hard Nose POL, 7/8 Nut Male Hard Nose POL x Male Hard Nose POL, 1-1/8 Nut 1/4 Male Inverted Flare x Male Hard Nose POL, 7/8 Nut 1/4 Male Inverted Flare x Male Hard Nose POL, 1-1/8 Nut 1/4 MNPT x Male Hard Nose POL, 7/8 Nut 1/4 MNPT x Male Hard Nose POL, 1-1/8 Nut 1/2 MNPT x Male Hard Nose POL, 7/8 Nut X 1/4 Tube OD 3/8 Tube OD Long Nipple Short Nipple Long Nipple Short Nipple 6 X X X 12 ME * X X X 20 ME * ME * ME1680L-20* ME * 30 ME ME ME1680L-30 ME ME ME ME1680L-36 ME ME ME ME1680L-48 ME ME ME1680HD ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME ME * ME * ME1689L-12 ME ME ME * 20 ME * ME ME1689L-20 ME ME ME ME1689L-30 ME ME ME ME ME ME ME ME1679HD ME1679HD ME1684L-12 ME ME1684L-20 ME Item Number Approx. Length 1/4 Tube OD Short Nipple 3/8 Tube OD Short Nipple 90º 90º 270 Right 360 Male Hard Nose POL x Male Hard Nose POL, 12 ME B90 ME B270R ME B360 7/8 Nut 1/4 MNPT x Male Hard 5 ME1669-5B90 ME1689-5B90 Nose POL, 7/8 Nut 6 ME1669-6B90 ME1689-6B90 90 Bend 270 Bend Right Hand A * NOTE: Dielectric option available. Add D after the prefix part number i.e. ME1662D-12 Male Hard Nose POL, 7/8 Nut Pigtail and Hogtail Assemblies come with two brass connectors brazed onto a heavy wall annealed copper tube with a 250 PSIG pressure rating. The 1/4 has a pull test rating of 500 and the 3/8 tube has a pull test rating of 750 pounds. Listed and tested in accordance with UL 569. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed. Dielectric Version *ME1600D Series Dielectric Pigtails/Hogtails are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/hogtail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current

19 INTERNAL VALVES INTERNAL VALVES 1-1/4 Threaded Internal Valve 1-1/4 Threaded Tee Body Internal Valves ME X ME990A-10- X Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - Only Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - with Pnuematic Actuator ME X ME992A-10- X Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - Only Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - with Pnuematic Actuator ME990AR-10- X Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - with Rotary Actuator ME992AR-10- X Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - with Rotary Actuator ME990M-10- X Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - with Manual Latch ME992M-10- X Excelerator TM 1-1/4 MNPT x 1-1/4 FNPT Internal Valve - with Manual Latch B ME Series To order Kalrez add K for Kalrez after the prefix part number i.e. ME990K To order Neoprene add N for Neoprene after the prefix part number i.e. ME990N To order Viton add V for Viton after the prefix part number i.e. ME990V Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME (85 GPM) Marshall Excelsior 1-1/4 Threaded Internal Valves are intended for use on bobtail trucks and storage tanks with 1-1/4 threaded connections in directional or bidirectional flow applications. Provides both manual shut-down and excess flow, closing in the event of the piping being separated from the valve. May be equipped with manual latch, pneumatic or rotary actuator, open/closing devices. Valves are equipped with a break-away feature in the cast body which permits the piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. For liquid or vapor service applications. Standardized 316 stainless steel cast body for maximum durability and corrosion resistence All stainless internal component construction Hexagonal installation flats to fit standard 2-3/8 hex socket wrench Precision machined hard coated stem Fully retained Nitrile seat disc Large variety of excess flow closing values X 1-1/4 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals UL Listed for LPG and NH 3 service Rulon TM bearing on stub shaft X 1-1/4 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 To order Kalrez add K for Kalrez after the prefix part number i.e. ME992K To order Neoprene add N for Neoprene after the prefix part number i.e. ME992N To order Viton add V for Viton after the prefix part number i.e. ME992V Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME (85 GPM) The 1-1/4 Threaded Tee Body Internal Valve is intended for use on bobtail trucks and storage tanks with 1-1/4 threaded connections in directional or bi-directional flow applications. Provides both manual shut-down as well as excess flow closing in the event of the piping being separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator, open/ closing devices. All valve models are equipped with a break-away feature in the cast body which permits the piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. The tee body features an additional FNPT side discharge port. For liquid or vapor service applications. Standardized 316 stainless steel cast body for maximum durability and corrosion resistence All stainless internal component construction Precision machined hard coated stem Fully retained Nitrile seat disc Largest variety of excess flow closing values Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals UL LISTED for LPG & NH 3 service Rulon bearings on stem and stub shafts ME /4 NTP Tee Body Internal Valve w/ Manual Latch B 31 32

20 INTERNAL VALVES 1-1/4 MNPT x 4 Bolt Flange 1-1/2 Threaded Tee Body Internal Valves INTERNAL VALVES ME X ME991A-10- X ME991AR-10- X ME991M-10- X Excelerator TM 1-1/4 NPT x 4 Bolt Flange Internal Valve - Only Excelerator TM 1-1/4 NPT x 4 Bolt Flange Internal Valve - with Pneumatic Actuator Excelerator TM 1-1/4 NPT x 4 Bolt Flange Internal Valve - with Rotary Actuator Excelerator TM 1-1/4 NPT x 4 Bolt Flange Internal Valve - with Manual Latch ME X ME992A-12- X ME992AR-12- X ME992M-12- X Excelerator TM 1-1/2 MNPT x 1-1/2 FNPT Internal Valve - Only Excelerator TM 1-1/2 MNPT x 1-1/2 FNPT Internal Valve - with Pneumatic Actuator Excelerator TM 1-1/2 MNPT x 1-1/2 FNPT Internal Valve - with Rotary Actuator Excelerator TM 1-1/2 MNPT x 1-1/2 FNPT Internal Valve - with Manual Latch B To order Kalrez add K for Kalrez after the prefix part number i.e. ME991K To order Neoprene add N for Neoprene after the prefix part number i.e. ME991N To order Viton add V for Viton after the prefix part number i.e. ME991V Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME (85 GPM) X 1-1/4 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 X 1-1/4 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 To order Kalrez add K for Kalrez after the prefix part number i.e. ME992K To order Neoprene add N for Neoprene after the prefix part number i.e. ME992N To order Viton add V for Viton after the prefix part number i.e. ME992V Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME (85 GPM) ME SERIES 1-1/2 NTP Tee Body Internal Valve B ME Series The ME Series Valves feature the new modular Excel-Flange 4 bolt outlet flange design that can be easily adapted to both NTP thread or socket weld companion flanges (ME842 and ME843 series) ranging from 1-1/4 to 2 in diameter making it universal to piping sizes within this range. This innovative system allows installers the ability to eliminate unnecessary connections as well as possible leak points by integrating a convenient 4 bolt flange union at the valve outlet. Intended for use on bobtail trucks and storage tanks with 1-1/4 threaded connections in directional or bi-directional flow applications. Provides both manual shut-down as well as excess flow closing in the event of the piping being separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator, and open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. For liquid or vapor service applications. The 1-1/2 Threaded Tee Body Internal Valve is intended for use on bobtail trucks, storage tanks and nurse wagons with 1-1/2 threaded connections in directional or bi-directional flow applications. Provides both manual shut-down as well as excess flow closing in the event of the piping being seperated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator, open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. The tee body features an additional FNPT side discharge port. FOR LIQUID OR VAPOR SERVICE APPLICATIONS. Durable ductile iron body All stainless internal component construction Precision machined hard coated stem Fully retained Nitrile seat disc Largest variety of excess flow closing values Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals UL LISTED for LPG & NH 3 service Rulon bearings on stem and stub shafts Supplied with hex socket 1-1/2 port plug for single discharge applications Durable 316 stainless steel body All stainless internal component construction Precision machined hard coated Fully retained Nitrile seat disc Largest variety of excess flow closing values Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts 4 Bolt universal outlet flange for built in union joint 33 34

21 INTERNAL VALVES 2 X 300 LB - Single and Double Flanged Internal Valve Excela-Flange LB X 2-8 Bolt Companion Flange INTERNAL VALVES B ME990S-2F-16- X ME990SA-2F-16- X ME990SAR-2F-16- X ME990S-2DFM- X ME990SA-2DFM- X ME990SAR-2DFM- X ME990S-2F-16 Series lb. x 2 FNPT Excelerator TM lb. Modified Single Flange x 2 FNPT Internal Valve - Only Excelerator TM lb. Modified Single Flange x 2 FNPT Internal Valve - with Pneumatic Actuator Excelerator TM lb. Modified Single Flange x 2 FNPT Internal Valve - with Rotary Actuator Excelerator TM lb. Modified Double Flange Internal Valve - Only Excelerator TM lb. Modified Double Flange Internal Valve - with Pneumatic Actuator Excelerator TM lb. Modified Double Flange Internal Valve - with Rotary Actuator To order Kalrez add K for Kalrez after the X 2 Valve Liquid Closing Flow Values prefix part number i.e. ME990SK-2F GPM LPG Closing Flow To order Neoprene add N for Neoprene after GPM LPG Closing Flow the prefix part number i.e. ME990SN-2F GPM LPG Closing Flow To order Viton add V for Viton after the prefix part number i.e. ME990SV-2F For NH 3 Multiply GPM by.90 Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME990S- 2F (260 GPM) The ME990S Series Valves are intended for use on bobtail delivery trucks, transport trucks and large storage tanks with 2 flanged connections in directional or bi-directional flow applications. Provides both manual shut-down and excess flow closing in the event of the piping being separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the pump or piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem and stem guide Fully retained Nitrile seat disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals Available with 316 Stainless Steel bodies UL Listed for LPG & NH 3 service Rulon TM bearings on stem and stub shafts Weight (lbs.) ME994S-2F-16- X Excelerator TM lb. Modifi ed Single Flange x 2-8 Bolt Flange Internal Valve - Only 21.6 ME994SA-2F-16- X Excelerator TM lb. Modifi ed Single Flange x 2-8 Bolt Flange Internal Valve - with Pneumatic Actuator 35.5 ME994SAR-2F-16- X Excelerator TM lb. Modifi ed Single Flange x 2-8 Bolt Flange Internal Valve - with Rotary Actuator 28.9 X 2 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 To order Kalrez add K for Kalrez after the prefix part number i.e. ME994SK-2F To order Neoprene add N for Neoprene after the prefix part number i.e. ME994SN-2F To order Viton add V for Viton after the prefix part number i.e. ME994SV-2F Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME994S-2F (260 GPM) The ME994S-2F Series Valves feature our new modular Excela-FlangeTM 2-8 bolt outlet flange design that can be easily adapted to either 2 NPT or socket weld companion flanges (MEP994S-2F-2SW) making it universal to either piping construction. Durable steel body with cadmium surface plating Universal 2-8 bolt outlet flange connection for threaded or welded piping Universal 2-8 bolt outlet flange provides a built-in union joint for easy servicability All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem and stem guide Fully retained nitrile seat disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes nitrile seals Available with Neoprene, Viton, or Kalrez seals UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts RulonTM bearings on stem and stub shafts Fits standard 2-300# flanged tank openings ME994S-2F-16 Series B ME990S-2DFM Series lb. Double Flanged Internal Valve 35 36

22 INTERNAL VALVES 2 and 3 Threaded Internal Valve 2 and 3 Threaded Tee Body Internal Valves INTERNAL VALVES B ME990M-16 Series ME Series ME X ME990A-16- X To order Kalrez add K for Kalrez after the prefix part number i.e. ME990K To order Neoprene add N for Neoprene after the prefix part number i.e. ME990N To order Viton add V for Viton after the prefix part number i.e. ME990V Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME (250 GPM) Excelerator TM 2 MNPT x 2 FNPT Internal Valve - Only Excelerator TM 2 MNPT x 2 FNPT Internal Valve - with Pnuematic Actuator ME990AR-16- X Excelerator TM 2 MNPT x 2 FNPT Internal Valve - with Rotary Actuator ME990M-16- X Excelerator TM 2 MNPT x 2 FNPT Internal Valve - with Manual Latch ME X Excelerator TM 3 MNPT x 3 FNPT Internal Valve - Only ME990A-24- X Excelerator TM 3 MNPT x 3 FNPT Internal Valve - with Pnuematic Actuator ME990AR-24- X Excelerator TM 3 MNPT x 3 FNPT Internal Valve - with Rotary Actuator ME990M-24- X Excelerator TM 3 MNPT x 3 FNPT Internal Valve - with Manual Latch Marshall Excelsior s 2 and 3 Threaded Internal Valves are intended for use on transport trucks and large storage tanks with 2 or 3 threaded connections in directional or bidirectional flow applications. Provides both manual shut-down and excess flow closing in the event of the piping being separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. For liquid or vapor service applications. X 2 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 ME X ME992A-16- X ME992AR-16- X ME992M-16- X ME X ME992A-24- X ME992AR-24- X ME992M-24- X Excelerator TM 2 MNPT x 2 FNPT Tee Body Internal Valve - Only Excelerator TM 2 MNPT x 2 FNPT Tee Body Internal Valve - with Pnuematic Actuator Excelerator TM 2 MNPT x 2 FNPT Tee Body Internal Valve - with Rotary Actuator Excelerator TM 2 MNPT x 2 FNPT Tee Body Internal Valve - with Manual Latch Excelerator TM 3 MNPT x 3 FNPT Tee Body Internal Valve - Only Excelerator TM 3 MNPT x 3 FNPT Tee Body Internal Valve - with Pnuematic Actuator Excelerator TM 3 MNPT x 3 FNPT Tee Body Internal Valve - with Rotary Actuator Excelerator TM 3 MNPT x 3 FNPT Tee Body Internal Valve - with Manual Latch X 2 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 Side discharge increases differential to close by approximately 2 PSIG To order Kalrez add K for Kalrez after the prefix part number i.e. ME992K To order Neoprene add N for Neoprene after the prefix part number i.e. ME992N To order Viton add V for Viton after the prefix part number i.e. ME992V Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME (250 GPM) The 2 and 3 Threaded Tee Body Internal Valves are intended for use on transport trucks and large storage tanks with 2 or 3 threaded connections in directional or bidirectional flow applications. They provide manual shut-down and excess flow closing should a pipe separate from the valve. A manual latch, pneumatic or rotary actuator open/closing devices are available. All valve models have a break-away feature in the cast body allowing the piping to shear off in the event of side impact, leaving the valve poppet intact. The tee body features an additional FNPT side discharge port. Valves are for liquid or vapor service applications. ME992M-16 2 NTP Tee Body Internal Valve w/ Manual Latch ME992M-24 3 NTP Tee Body Internal Valve w/manual Latch B Durable ductile body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem Fully retained Nitrile seat disc Largest variety of excess flow closing values Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals UL listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts Ductile body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem Fully retained Nitrile seat disc Largest variety of excess flow closing values Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals 37 38

23 INTERNAL VALVES 2 & 3 - Flanged Tee Body Internal Valve Series 2 and 3 MNPT x 300 LB Flanged Internal Valve INTERNAL VALVES B ME992S-2F-16- X ME992SA-2F-16- X ME992SAR-2F-16- X ME992S-3F-24- X ME992SA-3F-24- X ME992SAR-3F-24- X ME992S-2F-16 Excelerator TM lb. Modified Single Flange x 2 FNPT Tee Body Internal Valve - Only Excelerator TM lb. Modified Single Flange x 2 FNPT Tee Body Internal Valve - with Pneumatic Actuator Excelerator TM lb. Modified Single Flange x 2 FNPT Tee Body Internal Valve - with Rotary Actuator Excelerator TM lb. Modified Single Flange x 3 FNPT Tee Body Internal Valve - Only Excelerator TM lb. Modified Single Flange x 3 FNPT Tee Body Internal Valve - with Pneumatic Actuator Excelerator TM lb. Modified Single Flange x 3 FNPT Tee Body Internal Valve - with Rotary Actuator To order Kalrez add K for Kalrez after the prefix part number i.e. ME992SK-3F To order Neoprene add N for Neoprene after the prefix part number i.e. ME992SN-3F To order Viton add V for Viton after the prefix part number i.e. ME992SV-3F Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME992S-3F (250 GPM) X 2 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 X ME X ME991A-16- X ME991AR-16- X ME991M-16- X ME X ME991A-24- X ME991AR-24- X ME991M-24- X X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 Excelerator TM 2 MNPT x 2 300# Flange Internal Valve - Only Excelerator TM 2 MNPT x 2 300# Flange Internal Valve - with Pnuematic Actuator Excelerator TM 2 MNPT x 2 300# Flange Internal Valve - with Rotary Actuator Excelerator TM 2 MNPT x 2 300# Flange Internal Valve - with Manual Latch Excelerator TM 3 MNPT x 3 300# Flange Internal Valve - Only Excelerator TM 3 MNPT x 3 300# Flange Internal Valve - with Pnuematic Actuator Excelerator TM 3 MNPT x 3 300# Flange Internal Valve - with Rotary Actuator Excelerator TM 3 MNPT x 3 300# Flange Internal Valve - with Manual Latch 2 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow To order Kalrez add K for Kalrez after the prefix part number i.e. ME991K To order Neoprene add N for Neoprene after the prefix part number i.e. ME991N To order Viton add V for Viton after the prefix part number i.e. ME991V Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME (250 GPM) ME B ME992S-3F-24 These 2 and 3 Flanged Tee Body Internal Valves are intended for use on bobtail delivery trucks, transport trucks and large storage tanks with 2 and 3 flanged connections in directional or bi-directional flow applications. Provides both manual shut-down and excess flow closing in the event of the piping being separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuat or open/closing devices. All valve models are equipped with a breakaway feature in the cast body which permits the pump or piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. The tee body features an additional FNPT side discharge port for liquid service applications. Durable steel body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem and stem guide Fully retained Nitrile seat disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals Available with 316 Stainless Steel bodies UL Listed for LPG & NH 3 service Rulon TM bearings on stem and stub shafts Marshall Excelsior s 2 and 3 Flanged Internal Valves are intended for use on transport trucks and large storage tanks with 2 or 3 threaded connections in directional or bi-directional flow applications. The ME and ME Series feature standard 300# outlet flanges for fast reliable piping connections downstream of the tank. Ideally suited for existing tanks with NPT threaded couplings but downstream welded piping is desirable. Provides both manual shut-down and excess flow closing in the event of the piping being separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. For liquid or vapor service applications. Durable ductile body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem Fully retained Nitrile seat disc Largest variety of excess flow closing values Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts Xylan coated corrosion resistant mounting studs and gaskets included ME

24 INTERNAL VALVES INTERNAL VALVES 2 & LB 3-Way Flanged Tee Body Series 3 Flanged Internal Valve ME993S-16- X Excelerator TM lb. Modified Single Flange x (2) lb. Tee Body Internal Valve - Only ME990S-3DF - X Excelerator TM 3 - Double Flange Bobtail Internal Valve - Only ME993SA-16- X Excelerator TM lb. Modified Single Flange x (2) lb. Tee Body Internal Valve - with Pneumatic Actuator ME990SA-3DF - X Excelerator TM 3 - Double Flange Bobtail Internal Valve - with Pneumatic Actuator ME993SAR-16- X Excelerator TM lb. Modified Single Flange x (2) lb. Tee Body Internal Valve - with Rotary Actuator ME990SAR-3DF - X Excelerator TM 3 - Double Flange Bobtail Internal Valve - with Rotary Actuator ME993S-24- X Excelerator TM lb. Modified Single Flange x (2) lb. Tee Body Internal Valve - Only ME990S-3DFM- X Excelerator TM lb. Modified Double Flange Internal Valve - Only ME993SA-24- X Excelerator TM lb. Modified Single Flange x (2) lb. Tee Body Internal Valve - with Pneumatic Actuator ME990SA-3DFM- X Excelerator TM lb. Modified Double Flange Internal Valve - with Pneumatic Actuator ME993SAR-24- X Excelerator TM lb. Modified Single Flange x (2) lb. Tee Body Internal Valve - with Rotary Actuator ME990SAR-3DFM- X Excelerator TM lb. Modified Double Flange Internal Valve - with Rotary Actuator ME990S-3F -24- X Excelerator TM lb. Modified Single Flange x 3 FNPT Internal Valve - Only B ME993S-16 SERIES To order Kalrez add K for Kalrez after the prefix part number i.e. ME993SK To order Neoprene add N for Neoprene after the prefix part number i.e. ME993SN To order Viton add V for Viton after the prefix part number i.e. ME993SV Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME993S (250 GPM) X 2 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow ME990SA-3F -24- X ME990SAR-3F -24- X X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 Excelerator TM lb. Modified Single Flange x 3 FNPT Internal Valve - with Pneumatic Actuator Excelerator TM lb. Modified Single Flange x 3 FNPT Internal Valve - with Rotary Actuator To order Kalrez add K for Kalrez after the prefix part number i.e. ME990SK-SDF-300 To order Neoprene add N for Neoprene after the prefix part number i.e. ME990SN-SDF-300 To order Viton add V for Viton after the prefix part number i.e. ME990SV-SDF-300 Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME990S-3SF-250 (250 GPM) B Marshall Excelsior s 2 & LB 3-Way Flanged Tee Body Valves are inntended for use on bobtail delivery trucks, transport trucks and large storage tanks with 2 and 3 flanged connections in directional or bi-directional flow applications. Provides both manual shut-down and excess flow closing in the event of the piping being separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the pump or piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. The flanged tee body features an additional 300 lb. flanged side discharge port for liquid service applications. Durable steel body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem and stem guide Fully retained Nitrile seat disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs For NH 3 Multiply GPM by.90 Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals Available with 316 Stainless Steel bodies UL Listed for LPG & NH 3 service Rulon TM bearings on stem and stub shafts These 3 Flanged Internal Valves are intended for use on bobtail delivery trucks, transport trucks and large storage tanks with 3 flanged connections in directional or bidirectional flow applications. Provides both manual shut-down and excess flow closing in the event of the piping being separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the pump or piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. Durable steel body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem and stem guide Fully retained Nitrile seat disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals Available with 316 Stainless Steel bodies UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts ME990S-3F-24 Series ME990S-3DF Series ME990S-3DF Series 41 42

25 INTERNAL VALVES LB Flanged Internal Valves INTERNAL VALVES LB X 3-8 Bolt Universal Companion Flange Series B ME990-3F SERIES ME990-3F- X ME990A-3F- X To order Kalrez add K for Kalrez after the prefix part number i.e. ME990K-3F-500 To order Neoprene add N for Neoprene after the prefix part number i.e. ME990N-3F-500 To order Viton add V for Viton after the prefix part number i.e. ME990V-3F-500 Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME990-3F-500 (650 GPM) Excelerator TM 3 Single Flange Internal Valve - Only ExceleratorTM 3 Single Flange Internal Valve - with Pneumatic Actuator X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow Marshall Excelsior s LB Flanged Internal Valves are intended for use on transport trucks, bobtail trucks and large storage tanks with 3 flanged connections in directional or bi-directional flow applications. Provides both manual shut-down as well as excess flow closing in the event of the piping being separated from the valve. Can be equipped with a pneumatic actuator open/closing device. All stainless construction Precision machined stem and stem guide Fully retained Nitrile seat disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs Removable data plate For NH 3 Multiply GPM by.90 Threaded packing gland with seal ejector spring Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals UL Listed for LPG & NH 3 service Rulon TM bearings on stem and stub shafts Weight (Lbs.) ME994S-3F-24- X Excelerator TM lb. Modified Single Flange x 3-8 Bolt Companion Flange Internal Valve - Only 38.3 ME994SA-3F-24- X Excelerator TM lb. Modified Single Flange x 3-8 Bolt Companion Flange Internal Valve - w/pneumatic Actuator 52.8 ME994SAR-3F-24- X Excelerator TM lb. Modified Single Flange x 3-8 Bolt Companion Flange Internal Valve - w/rotary Actuator 45.9 X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 To order Kalrez add K for Kalrez after the prefix part number i.e. ME994SK-3F To order Neoprene add N for Neoprene after the prefix part number i.e. ME994SN-3F To order Viton add V for Viton after the prefix part number i.e. ME994SV-3F Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME994S-3F (260 GPM) The ME994S-3F Series Valves feature our new modular Excela-Flange 3-8 bolt outlet flange design that can be easily adapted to either 3 NPT or socket weld companion flanges (MEP994S-3F-3SW) making it universal to either piping construction. Durable steel body with cadmium surface plating Universal 3-8 bolt outlet flange connection for threaded or welded piping Universal 3-8 bolt outlet flange provides a built-in union joint for easy servicability All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem and stem guide Fully retained Nitrile seat disc Largest variety of excess flow closing values Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals Available with 316 Stainless Steel bodies UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts Fits standard 3-300# flanged tank openings ME994S-3F-24 SERIES B Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs 43 44

26 INTERNAL VALVES INTERNAL VALVES LB Double Flanged Offset Internal Valves LB Flanged Internal Valves ME990S-3DFO- X Offset Bobtail Internal Valve - Only ME990-4F- X Excelerator TM 4 Single Flange Internal Valve - Only ME990SA-3DFO- X Excelerator TM 3 Double Flange Offset Bobtail Internal Valve (Pneumatic Actuator) ME990A-4F- X Excelerator TM 4 Single Flange Internal Valve - with Pneumatic Actuator ME990SAR-3DFO- X Excelerator TM 3 Double Flange Offset Bobtail Internal Valve (Rotary Actuator) ME990AR-4F- X Excelerator TM 4 Single Flange Internal Valve - with Rotary Actuator B ME990-4F Series Alternate Gland Ports (Plugged) To order Kalrez add K for Kalrez after the prefix part number i.e. ME990SK-3DFO-300 To order Neoprene add N for Neoprene after the prefix part number i.e. ME990SN-3DFO-300 To order Viton add V for Viton after the prefix part number i.e. ME990SV-3DFO-300 Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME990S-3DFO-250 (250 GPM) The 3 Double Flanged Off-Set Internal Valves are intended for use on bobtail delivery trucks with 3 flanged connections in directional or bidirectional flow applications. The 3 offset outlet flange prevents pump installation interference with truck frame rails, cross members, PTO covers, drive shafts, and other common obstacles when remounting bobtail vessels onto new chassis. In order to reduce the amount of offset from the 2 maximum to 1-1/4, simply rotate the inlet flange connection by 1 bolt hole either direction. To eliminate the offset entirely, simply rotate 1 more bolt hole. The Excelerator TM offset is equipped with three separate packing gland locations to prevent interference while mounting the valve actuator regardless of how you choose to mount the valve. Provides both manual shut-down and excess flow closing in the event of the valve being separated from the tank. Can be equipped with pneumatic or rotary actuator open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the pump or piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. Body outlet flange offset 2 from inlet flange Standard with 3 gland ports for stem relocation (2 plugged) X 3 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 Xylan coated corrosion resistant mounting studs Roller cam actuation ME990M-4F- X X 4 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 4 Flanged Internal Valves are for use on transport trucks and large storage tanks with 4 flanged connections in directional or bidirectional flow applications. The all stainless construction valves provide manual shut-down and excess flow closing should the piping become separated from the valve. Can be equipped with manual latch, pneumatic or rotary actuator open/closing devices. Precision machined stem and stem guide Fully retained disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs Available with standard or #5 mesh filter screen Excelerator TM 4 Single Flange Internal Valve - with Manual Latch For #5 Mesh screen add/5 e.i. ME990-4F-650/5 To order Kalrez add K for Kalrez after the prefix part number i.e. ME990AK-4F-500 To order Neoprene add N for Neoprene after the prefix part number i.e. ME990AN-4F-500 To order Viton add V for Viton after the prefix part number i.e. ME990AV-4F-500 Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME990-4F-650 (650 GPM) Removable data plate Threaded packing gland with seal ejector spring Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts ME990-4F Series ME990-4F Series Cutaway View B Each gland port can accept pneumatic or rotary type actuators Durable steel body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem and stem guide Fully retained Nitrile seat disc Largest variety of excess flow closing values Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals Available with 316 Stainless Steel bodies UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts Corrosion resistant sleeved flange bolt holes 45 46

27 INTERNAL VALVES LB & LB Double Flanged Internal Valves Threaded Internal Valves INTERNAL VALVES CAVAGNA GROUP B ME990SAR-4DFM- X ME990SAR-6DFM- X ME990SAR-4DFM Excelerator TM lb. Modified Double Flange Internal Valve - with Rotary Actuator Excelerator TM lb. Modified Double Flange Internal Valve - with Rotary Actuator To order Kalrez add K for Kalrez after the prefix part number i.e. ME990SKAR- 4DFM-375 To order Viton add V for Viton after the prefix part number i.e. ME990SVAR- 4DFM-375 Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Indicate desired excess flow closing value when ordering - see chart for values i.e. ME990SAR-4DFM-375 (375 GPM) Marshall Excelsior s 4 & LB Double Flanged Internal Valves are intended for use on transport trucks and large storage tanks with 4 or 6 flanged connections in directional or bidirectional flow applications. Provides both manual shut-down and excess flow closing in the event of the piping being seperated from the valve. Equipped standard with a rotary actuator open/closing devices. All valve models are equipped with a break-away feature in the cast body which permits the pump or piping to shear off in the event of side impact, leaving the valve poppet intact and protecting the tank from catastrophic product loss. Durable steel body with cadmium surface plating All stainless internal component construction One piece threaded packing gland Precision machined hard coated stem and stem guide Fully retained Nitrile seat disc Largest variety of excess flow closing values Corrosion resistant sleeved flange bolt holes Xylan coated corrosion resistant mounting studs X 4 Valve Liquid Closing Flow Values GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow GPM LPG Closing Flow For NH 3 Multiply GPM by.90 Roller cam actuation Industry s fastest bleed time Removable data plate Industry s easiest valve to service Standard construction utilizes Nitrile seals Available with Neoprene, Viton, or Kalrez seals Available with 316 Stainless Steel bodies UL Listed for LPG and NH 3 service Rulon TM bearings on stem and stub shafts Inlet Outlet Closing Flow GPM Propane LPG Vapor Capacity Closing Flow Material Connection Connection Half Full (SCFH/Propane) GPM Ammonia One Way Two ways Coupling Coupling 25 PSIG 100 PSIG NH 3 + LPG /4 M NPT 1-1/4 F NPT 30 5,800 9, /4 M NPT 1-1/4 F NPT , /4 M NPT 1-1/4 F NPT ,950 18, M NPT 2 F NPT ,550 36, M NPT 2 F NPT ,600 57, Steel 2 M NPT 2 F NPT M NPT 3 F NPT ,600 48, M NPT 3 F NPT ,500 73, M NPT 3 F NPT ,500 87, M NPT 3 F NPT , , M NPT 3 F NPT Cavagna s Threaded Internal Valves, designed as primary shut-offs to control product discharge in LP-Gas service, are predominantly used in the liquid and vapor openings of bobtail and other transport vehicles. All valves satisfy the requirements of NFPA 58 and can also be used in stationary storage tank applications. All internal valves have a robust, one-piece body design and an incorporated excess flow function. Each valve has a weak section that allows the pump or piping to shear in the event of an accident, thereby leaving the valve mechanism intact. Cavagna threaded valves are compact and can be operated either manually or remotely via cable or pneumatic control. Valves contain spring-loaded, PTFE packing providing excellent leakage protection and the standard disc material provided is Nitrile. Flanged Internal Valve 3 1-1/4 Threaded Internal Valve CAVAGNA GROUP Closing LPG Vapor Capacity Closing Flow Inlet Outlet Material Flow GPM (SCFH/Propane) GPM Ammonia Connection Connection Single Double Propane 25 PSIG 100 PSIG NH3 + LPG ,100 42, ,900 62, lb. ANSI RF lb Steel ,200 71, Modified (4-7/8 ) ANSI RF , , B Cavagna Flanged Valves, equipped with a built-in excess flow valve to prevent uncontrolled product release, are perfect for mounting a pump or other similar piping connections. Mounting bolts weakened section, provided, allow the pump or piping to shear in the event of an accident, thereby leaving the valve intact. Cavagna flanged valves have a protection filter to avoid pump contamination from dirt and particles, easily removable when the valve is installed on the filling piping line. Cavagna flanged valves contain PTFE packing providing excellent leakage protection and the standard disc material provided is Nitrile, they can be operated manually or remotely via cable or pneumatic control. 3 Flanged Internal Valve 3 Double Flanged Internal Valve 47 48

28 INTERNAL VALVES & ACCESSORIES INTERNAL VALVE ACCESSORIES Flanged Internal Valve 4 CAVAGNA GROUP Flanged Internal Valve Accessories for 3 Single Flanged Valve CAVAGNA GROUP Material Inlet Outlet Closing Flow Connection Connection GPM Propane lb. ANSI RF lb Steel Modified (4-7/8 ) ANSI RF , Screws - 3/4-10 UNC Nuts (8 Up + 8 Down) 3/4-10 UNC Upper Gasket Lower Gasket Screws - M 20 x 2, Nuts (8 Up + 8 Down) M 20 x Screws 1 Upper Gasket 4 Flanged Internal Valve Cavagna Flanged Internal 4 Valves come equipped with a built-in excess flow valve to prevent uncontrolled product release, and are ideal for mounting a pump or other similar piping connections. Mounting bolts allow piping to shear in the event of an accident, leaving the valve intact. Flanged valves have a protection filter to avoid pump contamination from dirt, contain PTFE packing to provide excellent leakage protection, disc material is Nitrile, and can be operated manually or remotely via cable or pneumatic control. 16 Nuts (8 up and 8 down) 1 Lower Gasket B Flanged Internal Valve Accessories for 3 Double Flanged Valve CAVAGNA GROUP B ME Latches ME MEP MEP990-4F Excelerator TM Manual Latch Assembly for 1-1/4 Threaded Internal Valves Excelerator TM Manual Latch Assembly for ME and Series Excelerator TM Manual Latch Assembly for ME990-4F Series Screws (8 Up + 8 Down) 3/4-10 UNC Nuts (8 up + 8 down) 3/4-10 UNC Upper Gasket Lower Gasket 16 Screws (8 up and 8 down) 1 Upper Gasket 16 Nuts (8 up and 8 down) 1 Lower Gasket MEP Flanged Internal Valve Accessories for 4 Single Flanged Valve CAVAGNA GROUP MEP990-4F Releases MEP650 MEP651 Excelerator TM Open/Close Cable Control Release with 50 Cable Excelerator TM Open/Close Cable Control Release - Only Screws - 3/4-10 UNC Nuts (8 Up + 8 Down) 3/4-10 UNC Upper Gasket Lower Gasket 8 Screws 1 Upper Gasket MEP Nuts (8 up and 8 down) 1 Lower Gasket 49 50

29 INTERNAL VALVE ACCESSORIES ACTUATORS Latch/Remote Release Mechanisms CAVAGNA GROUP Internal Valve Actuators Powerstroke & Fastroke Series Fuse Latch Threaded Internal Valve 2 and Fuse Latch Threaded Internal Valve 1-1/4 X 1-1/ Dual Latch/Remote Release for Internal Valve 1-1/4 X 1-1/ Manual Lever and Release for 4 Internal Valve ME205 ME205R ME206 ME207 Actuator Type Airstroke TM by Firestone Airstroke TM by Firestone #9 Chamber #9 Chamber Fits MEC* Fits* Internal Valve ME Fisher C /4 Threaded REGO A3209R 1-1/4 Threaded ME990-16, ME990-24, Fisher C402, C421, C471, 2 and 3 ME990S-3F-24 C427, C477 Threaded ME990S-3DF Fisher C Double ME990S-3DFM C Series Flange ME207SF #9 Chamber Fisher C Series 3 Single Flange Fisher ME208SF #24 Chamber ME990-4F C Single C Series Flange ME710 Airstroke TM REGO Flowmatic Three-Way Valve ME ACTUATORS Internal Valve Actuators PowerTorq Series * Also fits Cavagna Series internal valves PowerStroke and FASTroke Actuators are designed with a heavy duty stainless steel frame to withstand the toughest conditions. These actuators are intended to be used at remote locations or operated directly off the air brake system in bobtail or transport applications. Smooth acting cam opens the internal valve lever when air, nitrogen, or carbon dioxide is applied to the line. When line pressure is released, the internal valve automatically closes. In case of a fire, the thermal plug melts at 212 F, releasing pressure allowing the internal valve to close. ME205R C ME225 Internal Valve Not Included Actuator Type Fits MEC* Fits Fisher* Internal Valve ME225 ME990-10, ME991-10, ME Fisher C /4 Threaded ME226 ME227 ME228 Direct Drive ME990-16, ME990-24, ME990S-3F-24, ME990S-2DFM, ME991-16, ME991-24, ME992-16, ME992-24, ME993S-16, ME993S-24 ME990S-3DF & ME990S-3DFM ME990-4F Fisher C402, C421, C427, C471, C477 Fisher C & C Series Fisher C & C Series 2 & 3 Threaded 3 Double Flange 4 Single Flange *Also fits Cavagna Series internal valves Fisher and Fisher Internal Valves are the trademarks of Emerson Process Management Cavagna is the trademark of Cavagna Group Direct Drive Actuators are designed to maximize the life of the internal valve by eliminating side pressure on the valve s packing stem. These actuators are intended to be used at remote locations or operated directly off the air brake system in bobtail or transport applications. Stainless steel all weather bracket Field repairable without complete disconnect from internal valve Repairable with common automotive brake chamber High gloss auto grade black epoxy coating Installation hardware is provided Standard disc material is Nitrile No modification required ME710 C The low temperature factory installed seals allow these actuators to be used with air, nitrogen, carbon dioxide or LP-Gas vapor. In case of a fire, the factory-provided thermal plug melts at 212 F., releasing pressure allowing the internal valve to close. The factory set rotation of these actuators require no modification and can be oriented in any direction. ME206 ME207 ME208SF ME227 Stainless steel all weather mounting hardware Field repairable under full tank pressure Anodized aluminum actuator body with easy to see open/close indicator No pinch points for operator safety Includes mounting bracket for ME707 Quick Release Valve NOTE: ME707 is not required for operation Installation hardware is provided 51 52

30 ACTUATORS EMERGENCY SHUTOFF VALVES Rotary Cams Actuators CAVAGNA GROUP 3/4 and 1 Emergency Shutoff Valves 1-1/4 and 1-1/2 Actuator 2 and 3 Actuator Fits O-205 Actuator 1-1/4 and 1-1/ O-206 Actuator 2 and O-207 SF Actuator 3 Single Flanged O-207 Actuator 3 Double Flanged O-208 SF Actuator 4 Single Flanged Cavagna s Rotary Cams Actuators are pre-assembled, ready for quick installment, and can be attached to the valve in four separate positions. The direct drive design does not apply side load to internal valve stem packing, which maximizes valve life. An internal cam mechanism guarantees high performance, optimizing the opening torque. The return torque movement relies only on the spring and is independent from the supply pressure. The actuator guarantees complete opening of the valve and is equipped with a limit switch. Latch Type OAL ME /4 FNPT Emergency Shutoff Valve (ESV) Pneumatic 4-3/4 ME FNPT Emergency Shutoff Valve (ESV) Pneumatic 4-3/4 ME980C-6 3/4 FNPT Emergency Shutoff Valve (ESV) Cable 4-3/4 ME980C-8 1 FNPT Emergency Shutoff Valve (ESV) Cable 4-3/4 Emergency Shutoff Valves (ESVs) provide rapid and positive shutdown of gas lines should a down stream rupture or piping break occur. Due to the presence of a built-in fusible element, the ESV will automatically close when exposed to heat between 212 F F. These valves are suited for installation at direct fired vaporizer inlets for automatic emergency shutdown as a result of fire or at dispensing pump inlets to provide immediate and positive remote shutdown. ME980C-6 3 Single Flanged Actuator Immediate and automatic closing in absence of air (rapid discharge accessories are not needed) Open/close indicator Compact design and lightweight Stainless steel valve anchoring bracket Aluminum body, stainless steel and aluminum components Self-lubricating with PTFE carbon-graphite seals Operating media: compressed filtered air, not necessarily lubricated 500,000 opening cycles guaranteed Powder coated ductile iron body with cast hexagonal ends Integral swing away check valve with soft seat to promote maximum product flow and minimize product loss in the event line failure All stainless steel, corrosion resistant internal component construction Indicator clearly shows if valve is open/closed UL Listed for use with LP Gas and Anhydrous Ammonia PSI WOG Integral fusible element for automatic closure when exposed to fire Durable Teflon packing gland and resilient seals provide long lasting service life Available with pneumatic or cable style latch mechanism C 3 Double Flanged Actuator 4 Single Flanged Actuator C ACTUATOR ACCESSORIES Actuator Accessories Inlet Outlet ME707 3/8 FNPT 3/8 FNPT (2 Ports) ME708 1/4 FNPT 1/4 FNPT ME709 1/4 FNPT 1/4 MNPT ME707 ME707 - The quick release valve is used in conjunction with Marshall Excelsior s air actuators to decrease the response time when closing actuators. They are particularly effective when long distances (75 feet or more) exist between the actuator and the actuator control valve. ME707 - The PSIG air pressure regulator prolongs the life of the air actuator and air system by allowing the air pressure to be set and regulated at the minimum required operating pressure for each individual system. ME709 - The gas/air filter is used to filter foreign materials and/or particles from LP-Gas systems such as motor fuel/carburetion systems. These filters to be used on air supply lines for internal and emergency shutoff valve actuator systems. ME708 ME

31 EMERGENCY SHUTOFF VALVES 1-1/4-3 Emergency Shutoff Valves Emergency Shutoff Valve Actuators EMERGENCY SHUTOFF VALVES ME ME F Latch Type Flange Material OAL ME /4 FNPT Emergency Shutoff Valve (ESV) Pneumatic Ductile Iron 5-3/8 ME980C /4 FNPT ESV Cable Ductile Iron 5-3/8 ME FNPT ESV Pneumatic Cast Steel 6-7/8 ME980C-16 2 FNPT ESV Cable Cast Steel 6-7/8 ME FNPT ESV Pneumatic Ductile Iron 9-5/8 ME980C-24 3 FNPT ESV Cable Ductile Iron 9-5/8 ME F lb. Flange ESV Pneumatic 11-7/8 ME980C-16-2F lb. Flange ESV Cable 11-7/8 ME F lb. Flange ESV Pneumatic 14-1/8 Ductile Iron ME980C-24-3F lb. Flange ESV Cable 14-1/8 ME F lb. Flange ESV Pneumatic 14-1/4 ME980C-24-4F lb. Flange ESV Cable 14-1/4 Emergency Shutoff Valve (ESV) To order ESV with Pneumatic Actuator add A after the prefix part number i.e. ME980A-10 To order ESV with Rotary Actuator add AR after the prefix part number i.e. ME980AR-10 Emergency Shutoff Valves (ESVs) are designed to provide rapid and positive shutdown of gas lines should a down stream rupture or piping break occur. Due to the presence of a built-in fusible element at the valve operating hub, the ESV will automatically close when exposed to heat between 212 F F. These valves are ideally suited for installation at bulkheads or inline plumbing for automatic emergency shutdown as a result of fire or to provide immediate and positive manual or remote shutdown. Actuator Type Fits MEC Fits ESV ME551 Airstroke TM by ME980-10, ME980-16, ME F, Fisher N /4, Firestone ME980-24, ME F, ME F Series 2, 3 ME552 Direct Drive ME980-10, ME980-16, ME F, Fisher N /4, ME980-24, ME F, ME F Series 2, 3 Airstroke TM is a trademark of Firestone Industrial Products Company Fisher and Fisher Internal Valves are trademarks of Emerson Process Management Emergency Shutoff Valve Actuators are to be used with emergency shutoff valves in remote locations. Pressure to the line enables a smooth acting cam to completely open the emergency shutoff valve for full flow operation. When line pressure is released, the emergency shutoff valve automatically closes. In case of a fire a thermal plug melts at 212 F, allowing the ESV to close. Modification is not required to actuators and all installation hardware is provided. The PowerTorq direct drive actuator maximizes the life of the emergency shutoff valve, eliminating side pressure on the packing stem. ME551 Operating Pressure Limits Minimum Maximum Recommended 20 PSIG 125 PSIG PSIG ME552 Operating Pressure Limits Minimum Maximum Recommended 25 PSIG 125 PSIG PSIG ME551 ME552 C ME Durable powder coated ductile iron body Removable flanged ends for easy field service Integral swing-away check valve with soft seat to promote maximum product flow and prevent reverse product flow All stainless steel, corrosion resistant internal component construction UL Listed for use with LP Gas and Anhydrous Ammonia PSI WOG Integral fusible element for automatic closure when exposed to fire Durable Teflon packing gland and resilient seals provide long lasting service life Available with pneumatic or cable style latch mechanism ME551 Heavy duty stainless steel all weather bracket Use with air, nitrogen or carbon dioxide Uses existing Fisher thermal plug ME552 Stainless steel, all weather mounting hardware Field repairable under full tank pressure Low temperature seals allow use with air, nitrogen, carbon dioxide or LP-Gas vapor Anodized aluminum actuator body with easy to see open/close indicator No pinch points for operator safety Factory installed thermal plug C Includes mounting bracket for ME707 Quick Release Valve NOTE: ME707 is not required for operation ME

32 EMERGENCY SHUTOFF VALVES EMERGENCY SHUTOFF VALVES Flanged Adapting Spool Kits High Flow Railcar ESV MEP990-4DFM/3DFM Fits Internal Valve Models MEP990-4DFM/3DFM 4-300LB x 3-300LB Flanged ACF/ESV/ISC Adapting Spool Kit ME990S-4DFM Series Flanged Adapting Spool Kits are used in conjunction with MEC s flanged internal valves for excess flow protection on inline or drop down weld neck tank construction to safely increase or decrease tank connections or line sizing in accordance to NFPA #58 code requirements. Each bell housing is carefully contoured to allow ample unrestricted flow around the internal valve closing poppet for accurate and reliable excess flow protection in the event of a downstream line failure or separation. Ideally suited for protection of weld neck tank openings, as replacements to traditional emergency shut off (ESV) installations or to adapt flanged vapor relief tank openings from 4 to 3 or vice versa such as needed to replace ACF type relief valves. Cadmium plated ductile iron body for maximum durability Precise interior contour for maximum flow around internal valve poppet Includes all studs/nuts and gaskets Suitable for use as inline ESV when used in conjunction with Excelerator TM Internal Valves (internal valve sold separately) For use with LPG and NH3-400 PSI WOG Closing Flow GPM/LPG ME983-16/150 High Flow Railcar ESV 2 FNPT X 2 FNPT 150* ME983-16/250 High Flow Railcar ESV 2 FNPT X 2 FNPT 250 ME983-16/500 High Flow Railcar ESV 2 FNPT X 2 FNPT 500 ME High Flow Railcar ESV 2 FNPT X 2 FNPT ~ * Recommended for vapor service - approx. closing flow 71,000 SCFH/LPG ~ Availlable with Kalrez, Viton and Neoprene seal materials ~ For NH3 multiply GPM by.90 Excelerator Railcar Emergency Shutoff Valves (ESV s) are designed to provide rapid and positive shutdown of gas lines should a downstream rupture or piping break occur during product transfer. Featuring a built-in fusible element at the valve operating hub to ensure the ESV will automatically close when exposed to heat between 212 F F. In addition to the fusible element, the Excelerator Railcar ESV s are equipped with a poppet design similar the MEC internal safety valves that provides an integral excess flow feature. MEC offers a variety of closing flow values ranging from very high liquid flow rates to more moderate vapor flow rates depending on the application. MEC Excelerator Railcar ESV s are equipped standard with quick disconnect internal pneumatic operators for rapid and reliable open/close of the poppet allowing for convenient on site or remote shutdown of the valve. ME983 Series C ME980SAR-4DFM High Capacity - Flanged Actuator Type ME980SAR-4DFM 4-300LB Flange Emergency Shutoff Valve (ESV) Rotary ME980SAR-6DFM 6-300LB Flange Emergency Shutoff Valve (ESV) Rotary Emergency Shutoff Valves (ESV s) are designed to provide rapid and positive shutdown of gas lines should a downstream rupture or piping break occur. Due to the presence of a built-in fusible element at the valve operating hub the ESV will automatically close when exposed to heat between 212 F F. These valves are ideally suited for installation at bulkheads or inline plumbing for automatic emergency shutdown as a result of fire or to provide immediate and positive manual or remote shutdown. 316 stainless steel body All stainless steel internal component construction provides maximum corrosion resistance Hardened stainless steel flanged end connection for durability and ease of field service UL Listed for LPG and Anhydrous Ammonia PSI WOG Integral fusible element for automatic closure when exposed to fire Durable PTFE packing gland with resilient seals providing long lasting service 100% field repairable - no special tools required E-Z grip ribs for installation even with heavy protective hand wear ME983 Series Cutaway View C ME980SAR-4DFM Cutaway View Cadmium plated steel/ductile iron body for maximum durability Long stroke internal valve poppet for maximum product flow All stainless steel internal component construction provides maximum corrosion resistance Flanged end connection for ease of field service UL Listed for LPG and Anhydrous Ammonia PSI WOG Integral fusible element for automatic closure when exposed to fire Durable Teflon packing gland and resilient seals provide long lasting service life Pre-mounted inlet bell housing for quick and easy installation All mounting hardware included High Capacity - Flanged Accessories/Repair Kits MEP990-4DFM Bell Housing MEP990-4DFM MEP990-6DFM 4-300LB Double Flange ESV/ISC Bell Housing Converstion Kit - fits ME990S-4DFM 6-300LB Double Flange ESV/ISC Bell Housing Converstion Kit - fits ME990S-6DFM 57 58

33 EMERGENCY SHUTOFF VALVES ACCESSORIES RELIEF VALVES ESV/Internal Valve Accessories Quad-Port Relief Valve Manifold ME ME Universal ESV/Internal Valve Remote Release/No Cable ME Universal ESV/Internal Valve Remote Release with 25 Cable ME Universal ESV/Internal Valve Remote Release with 50 Cable ME Remote Release Cable Assy. 5/16-24UNF - 25 OAL ME Remote Release Cable Assy. 5/16-24UNF - 50 OAL ESV Accessories /4 ESV Palm Valve MEP980PN-100 MEC Complete Pneumatic Controls / E-Stop Kit w/ Placards & 100 Poly Tubing MEP980PN-105 Compression Tube Extension Adapter - 1/8 MNPT x 1/4 CC, Brass MEP980PN-106 Compression Tube Extension Tee - 1/4 CC, Brass MEP980PN-113 Tubing Extension 1/4 x 100 Ft Roll, Poly The ESV Palm Valve is a mechanical, poppet valve. Their compact size requires little mounting space. The VM series offers a wide variety of actuator styles and flow capacity up to 1.0 Cv. Flange Size No. of Flow Capacity Factory Installed Relief Valve Accessory Relief Application SCFM/Air** Seal Start-to-Discharge Part No. 8 Stud/Nut Universal Valves 120% Set Pressure Material* Setting PSIG Mounting Kit ME903S-3F/250VM 3 LPG 20,400** Viton 3-300#** MEV250VM/250 ME903S-3F/250CN 3 LPG & NH 3 20,400** Nitrile MEV250CN/ ME903S-4F/250VM 3 LPG 20,400** Viton 4-300# MEV250VM/250 ME903S-4F/250CN 3 LPG & NH 3 20,400** Nitrile MEV250CN/250 ME904S-3F/250VM 4 LPG 27,740*** Viton 3-300# ** MEV250VM/250 ME904S-3F/250CN 4 LPG & NH 3 27,740*** Nitrile MEV250CN/ ME904S-4F/250VM 4 LPG 27,740*** Viton 4-300# MEV250VM/250 ME904S-4F/250CN 4 LPG & NH 3 27,740*** Nitrile MEV250CN/250 ME904SK ME903S-3F/265VM 3 LPG 20,555** Viton 3-300# ** MEV250VM/265 ME903S-3F/265CN 3 LPG & NH 3 20,555** Nitrile MEV250CN/265 ME903S-4F/265VM 3 LPG 20,555** Viton 4-300# MEV250VM/265 ME903S-4F/265CN 3 LPG & NH 3 20,555** Nitrile MEV250CN/ ME904S-3F/265VM 4 LPG 28,550*** Viton 3-300# ** MEV250VM/265 ME904S-3F/265CN 4 LPG & NH 3 28,550*** Nitrile MEV250CN/265 ME904S-4F/265VM 4 LPG 28,550*** Viton 4-300# MEV250VM/265 ME904S-4F/265CN 4 LPG & NH 3 28,550*** Nitrile MEV250CN/265 * Nitrile not UL Listed ** For use with modified 300 # ANSI Flange with 4 port *** Flow rating based on number of valves indicated in parenthesis () Flow rates are shown as bare relief valves, pipe-aways will reduce flow Teflon is a trademark of DuPont Company Viton is a trademark of DuPont Performance Elastomers. C 3330 ESV Palm Valve MEC s Pneumatic Control / E-Stop Kit is designed to be used in conjunction with MEC s pneumatic controlled emergency shutoff valves (EVS) or internal valves to remotely open and close using compressed gas. Each kit includes all necessary components for connecting and charging a pneumatic control system complete with brackets, mounting hardware, and necessary placarding in a variety of orientations for fast reliable remote system shutdown. Heavy duty pneumatic control and charging valves Predrilled mounting plates and hardware Large easy to read placards / instruction labels Built in leak detection gauge Easy to install Includes 100 Ft of 1/4 poly tubing and necessary compression connectors Additional extension tubing and connectors available Suitable for use with dry air, nitrogen or LPG vapor Quad-Port Relief Valve Manifolds are designed for use with large LP-Gas and NH 3 stationary storage containers with flanged openings. These relief manifolds have an additional relief valve excluded from the flow rating, which allows for service and/or exchange of any one relief valve without evacuating the tank. The large port selection handle allows for each specific valve port to be closed off so the relief valve may be removed while the remaining valves remain under pressure, protecting the tank and contents. Each manifold model is rated based on the flow through the relief valves with one valve removed from service. Heavy duty ductile iron body Corrosion resistant finish Durable V-cup Teflon packing stem seals Molded rubber weather guard for manifold rotary gear with port plug Integral breakaway feature leaves seat and seal intact Includes weep hole deflector and hex socket plugs Integrated pilot equalizing feature Includes convenient lifting chain 3-1/2 - eight outlet thread accepts 3 MNPT pipe-away ME903S-3F/250VM D MEP980PN-100 MEP980PN-100 Installed Pressure source and regulator not included ESV and actuator not included 59 60

34 EMERGENCY SHUTOFF VALVES ACCESSORIES RELIEF VALVES Mini Quad-Port Relief Manifold Mini Quad-Port Tank Sizing Chart Relief Valve STD Application Tank Connection Size Relief Valve ***Flow Rating 120% of set pressure LPG NH3 # of Valves UL Rating ME902S-16B/ PSIG Yes No 2 MEV125B/250 5,115 (1) ME902S-16/ PSIG No Yes 2 MEV125/250 5,115 (1) ME902S-16/ PSIG No Yes 2 MEV125/265 5,855 (1) ME903S-16B/ PSIG Yes No 3 MEV125B/250 9,320 (2) ME903S-16/ PSIG No Yes 2 MNPT 3 MEV125/250 9,320 (2) ME903S-16/ PSIG No Yes 3 MEV125/265 10,795 (2) ME904S-16B/ PSIG Yes No 4 MEV125B/250 12,481 (3) ME904S-16/ PSIG No Yes 4 MEV125/250 12,481 (3) ME904S-16/ PSIG No Yes 4 MEV125/265 13,630 (3) *** Flow rating based on number of valves indicated in parenthesis () Flow rates shown are for bare relief valves, pipe-aways will reduce flow rates Note: For 265 PSIG set pressure change part number suffix - i.e. ME903S-16/265 To order Viton seal materials add VM for Viton after the prefix part number - i.e. ME904S-16B/250VM LPG NH3 Relief Valve 30,000 Gallon 30,000 Gallon 18,000 Gallon 30,000 Gallon 30,000 Gallon 18,000 Gallon STD 109 O.D. 131 O.D. 109 O.D. 131 O.D. 131 O.D. 109 O.D. ME902 Series 250 PSIG N/A PSIG N/A N/A ME903 Series 265 PSIG PSIG ME902 Series 250 PSIG PSIG * Number indicates quantity of relief manifolds to adequated relief vapor overpressure conditions for listed tank surface areas. Mini Quad-Port Relief Valve Manifold Application Tank Connection Relief Valve Port N N Size # of Valves ME904S-16 Yes Yes 2 MNPT 1-1/4 FNPT (4) Mini Quad-Port Relief Manifold are for use with large LPG & NH3 stationary storage containers with 2 FNPT openings. These Relief Manifolds have an additional relief valve excluded from the flow rating, which allows for service and/or exchange of any one relief valve without evacuating the tank. Our large port selection handle allows for each specific valve port to be closed off so that the relief valve may be removed while the remaining valves stay under pressure protecting the tank and contents. Each manifold model is rated based on the flow through the relief valves with one valve removed from service. Application LPG NH 3 MEV125/ /4 MNPT External Relief Valve-Nitrile 250PSI - 6,328 SCFM No Yes MEV125/ /4 MNPT External Relief Valve-Nitrile 265PSI - 6,542 SCFM No Yes MEV125B/ /4 MNPT External Relief Valve-Nitrile 250PSI - 6,328 SCFM Yes No MEV125B/ /4 MNPT External Relief Valve-Nitrile 265PSI - 6,542 SCFM Yes No D ME903S-16B/250VM Heavy duty ductile iron body All stainless steel internal components Durable V-cup Teflon packing stem seals Large diameter port selection handle and port indicator Molded rubber weather guard for manifold rotary gear with port plug Available with 250 PSIG and 265 PSIG relief valve set pressures Accessories MEP178 MEP178K MEP123 Vapor equalizing feature for easy port to port rotation Includes tank stabilizer nut for maximum strength at container connection Covers most 30,000 gallon tanks with only two manifolds Pipeaway Adapter for MEV125 Series with 2 FNPT Outlet - Aluminum Pipeaway Adapter Kit with Stabilizer Bracket for ME904S-16 Installation/Removal Tool for MEV125 Series Relief Valves Mini Quad-Port Relief Valve Manifold are for use with large LPG & NH3 stationary storage containers with 2 FNPT openings. These Relief Manifolds have an additional relief valve excluded from the flow rating, which allows for service and/or exchange of any one relief valve without evacuating the tank. Our large port selection handle allows for each specific valve port to be closed off so that the relief valve may be removed while the remaining valves stay under pressure protecting the tank and contents. Each manifold model is rated based on the flow through the relief valves with one valve removed from service. Heavy duty ductile iron body All stainless steel internal components Durable Teflon V-pack stem seals Large diameter port selection handle and port indicator Molded rubber weather guard for manifold rotary gear with port plug Vapor equalizing feature for easy port to port rotation Includes tank stabilizer nut for maximum strength at container connection ME904S-16 MEV125/250 D MEP178K (Pipeaway Adapter and Stabilizer Kit) 61 62

35 RELIEF VALVES 1/4 NPT - 1 NPT External Pressure Relief Valves RELIEF VALVES 1-1/4 & 2-1/2 NPT External Pressure Relief Valves D Container Connection MNPT Seal Material* Start-to- Discharge Setting PSIG 60 OAL Wrench Hex Flow Capacity SCFM/Air** 120% Set Pressure MEV25/60 MEV25/ /4 1-59/64 7/8 MEV25/ MEV25/ MEV50/250 Nitrile /2 2-1/2 MEV50/ MEV75/ /8 MEV75/312 3/ /32 MEV75/ MEVS-PVE431B/250 3/ /32 Nitrile 1-3/4 MEVS-PVE431/ ,740 Application LPG Accessories MEP173 Pipe-away Adapter MEP174 Pipe-away Adapter 1,740 MEP173 Pipeaway Adapter * Nitrile and Kalrez not UL Listed ** Flow rates are shown for bare relief valves, pipe-aways will reduce flow *** Per NFPA 58, table area shown is for UL or ASME flow rating, which ever is greater Viton and Kalrez are trademarks of DuPont Performance Elastomers. NOTE: Kalrez option available These External Pressure Relief Valves are designed for installation in stationary ASME applications such as bulk plant, skid tanks, underground and above ground containers, as the primary pressure relief valve. MEVS-PVE431/250 NOTE: This valve and all working parts are to be installed outside the container. Therefore, to ensure proper operation of the valve, the valve must be protected from damage and inspections performed as prescribed by Marshall Excelsior. Brass construction for LP-Gas application Compact design to fit any application Stainless steel spring Specially designed internal components to increase flow at discharge Custom start-to-discharge settings available upon request Non-adjustable, tamper resistant design Container Connection MNPT Seal Material* Start-to- Discharge Setting PSIG OAL Wrench Hex Flow Capacity SCFM/Air** 120% Set Pressure Suitable for tanks w/ surface area up to: *** Application LPG NH 3 Accessories MEV125B/250 Nitrile 250 6, Sq. Ft. MEV MEV125B/265 Nitrile 265 6, Sq. Ft. YES NO Replacement Cap MEV125BVM/250 Viton 250 6, Sq. Ft. MEV125BVM/265 Viton 265 6, Sq. Ft. MEP178 1/4 2-11/16 Pipeaway Adapter MEV125/250 Nitrile 250 6, Sq. Ft. NO YES MEV125/265 Nitrile 265 6, Sq. Ft. MEP /2 MEV125VM/250 Viton 250 6, Sq. Ft. Installation / Removal Tool MEV125VM/265 Viton 265 6, Sq. Ft. NO MEV250VM/250 Viton , Sq. Ft. MEP170 YES MEV250CN/250 Nitrile , Sq. Ft. YES Relief Valve Adapter 2-1/2 4-1/8 MEP250 MEV250VM/265 Viton , Sq. Ft. NO Installation/ MEV250CN/265 Nitrile , Sq. Ft. YES Removal Tool ** Flow rates are shown for bare relief valves, pipe-aways will reduce flow *** Per NFPA 58, table area shown is for UL or ASME flow rating, which ever is greater Viton and Kalrez are trademarks of DuPont Performance Elastomers. MEV125 Series are for use with large LPG & NH3 storage containers as a primary pressure relief valve on ASME above and below ground bulk plant installations. All working components are external to the container connection away from possible product contaminants. Compatible with 1-1/4 FNPT multiple head units including ME902S-16, ME903S-16 and ME904S-16 Series Mini Quad-Port Manifolds. MEV250 Series are designed for use with storage containers as a primary pressure relief valve on ASME above and below ground installations. All working components and external to the container connection away from possible product contaminants. Compatible with all standard LPG pressure vessels with NPT couplings. Durable single piece anodized aluminum or brass forged body Stainless steel internal components Standard Seal Material: HNBR Outlet thread accepts MEP178 pipeaway for 2 FNPT pipeaway Includes plastic weather cap for relief valve outlet MEV125/250 (Aluminum) MEV125B/250 (Brass) D Available Seal Material: Viton or Kalrez MEV50/250 MEV250VM/250 MEP250 MEV250VM/250 Top View MEP

36 RELIEF VALVES RELIEF VALVES Semi Internal Pressure Relief Valves DOT Full Internal Pressure Relief Valve Container Connection MNPT Pipeaway MNPT Seal Material* Start-to- Discharge Setting PSIG Wrench Hex Flow Capacity SCFM/Air** 120% Set Pressure 4,870 Application LPG NH 3 MEV200SIR/125 Nitrile 125 NO MEV200SIR/250 Nitrile ,925 NO MEV200SSIR/250 Nitrile ,925 YES MEV200SIR/265 Nitrile ,475 NO MEV200SSIR/265 Nitrile ,475 YES MEV200SIRV/125 Viton 125 4,870 NO MEV200SIRV/250 Viton ,925 NO MEV200SSIRV/ Viton /2 10,925 YES YES MEV200SIRV/250 Viton ,925 NO MEV200SSIRV/250 Viton ,925 YES MEV200SIRK/125* Kalrez 125 4,870 NO MEV200SIRK/250* Kalrez ,925 NO MEV200SSIRK/250* Kalrez ,925 YES MEV200SIRK/265* Kalrez ,475 NO MEV200SSIRK/265* Kalrez ,475 YES Accessories MEV200SIR-106 (Cap & Lanyard) MEP (Pipeaway adapter) see page 104 Start-to- UL Flow Capacity Accessories Container Container Seal Discharge SCFM/Air** Relief Discharge Vents Application Protective Type Connection Material* Setting Per CGA S1.1 Valve Cap PSIG Plug Angle Angle MEV75FIR* DOT 3/4 MNPT Viton LPG MEP175C MEP175P MEP MEP * UL Listed in accordance with Compressed Gas Association Pamphlet S-1.1, Pressure Device Standard for Cylinders; Meets requirements for use on DOT containers with 242 lb. or less weight of water or 122 lb. or less of LP-Gas ** Flow rates are shown for bare relief valves, pipe-aways will reduce flow Viton is a trademark of DuPont Performance Elastomers Full Internal Pressure Relief Valves are designed for use on forklift cylinders and other DOT removable cylinders up to 122 pounds of LP-Gas capacity. The working components of this valve are located inside the tank reducing possible malfunction caused by outside debris or other foreign materials. NOTE: NFPA #58 states, All containers used in industrial trucks (including fork lift truck cylinders) service shall have the container pressure relief valve replaced by a new or unused valve within 12 years of the date of manufacture of the container and every 10 years thereafter. MEV75FIR * Seat Material not UL Listed ** Flow rates are shown as bare relief valves *** Size relief capacity per NFPA , table Viton and Kalrez are trademarks of DuPont Performance Elastomers NOTE: For stainless steel add S to part to part number - i.e. MEV200SSIR/265 MEP175C Semi Internal Pressure Relief Valves are designed for use in large stationary LPG containers as a primary pressure relief valve. These pressure relief valves have been specifically designed to provide optimum performance when installed in either a 2 half or full coupling making them perfect for most large stationary tank installations. MEP MEP /4 & 2-1/2 NPT External Pressure Relief Valves D Durable forged brass body with 3 NPT outlet pipe-away thread All steel and stainless steel stem, spring, and valve gasket holder for maximum corrosion resistance Custom set pressures available Available with Nitrile, Viton, or Kalrez valve seals Large seating surface for superior seal performance and reliability Available with 125, 250, 265 PSI UL Listed set pressures Flow Capacity STD Container Installation SCFM/Air ** Tank Surface Pipeaway Setting Connection Hex 120% Area (Sq. Ft.) Adapter (PSIG) Set Pressure MEVS-UVE445AM/ MNPT 1-5/ MEPS MEVS-PVE445AT/375* MNPT 1-5/ MEPS MEVS-445AT is classified by Underwriters Laboratories Inc. in accordance with CGA Pamphlet S-1.1. ** Flow rates are shown as bare relief valves D MEV200SIR MEV200SSIR Used as pressure relief device on larger ASME engine fuel containers and recreational vehicle containers Use MEVS-PVE445AT on multiport 420-lb. DOT containers Protective cap MEPS-UEP16 included Supplied with Everseal pre-applied thread sealant Dimensions (Approx.) - see Fig. 1 A B C D Hex 5-9/16 1-3/ /32 1-5/16 Figure 1 MEVS-UVE445A Series 65 66

37 RELIEF VALVES RELIEF VALVES Full Internal Pressure Relief Valves Semi-Internal Pressure Relief Valves STD/ PSIG Container Connection Installation Hex Flow Capacity SCFM/Air** Set Pres. Service Seat Material LPG NH3 Cap Acessory Hex Installation Tool MEV200FIR/ Yes Nitrile MEV200FIR/ Yes Nitrile MEV200FIRV/ No Viton 2 MNPT 1-1/2 4,460 MEV200FIRV/ No Viton MEV200FIR-09 MEP200FIR MEV200FIRK/250* 250 Yes Kalrez ~ MEV200FIRK/265* 265 Yes Kalrez ~ Yes MEV300FIR/ ,865 Yes Nitrile MEV300FIR/ ,600 Yes Nitrile MEV300FIRV/ ,865 No Viton 3 MNPT 2-1/2 MEV300FIRV/ ,600 No Viton MEV300FIR-09 MEP300FIR MEV300FIRK/250* ,865 Yes Kalrez ~ MEV300FIRK/265* ,600 Yes Kalrez ~ * Seat Material not UL Listed ** Flow rates are shown for bare relief valves, pipe-aways will reduce flow *** Size relief capacity per NFPA , table ~ Recommended for LPG and NH 3 dual service applications Full Internal Pressure Relief Valves are for use in mobile LPG and NH 3 containers as a primary pressure relief valve for bobtail and transport trailer installations. All working components are internal to the container connection preventing damage to the valve should a roll-over occur. STD/ PSIG Container Connection Installation Hex Flow Capacity SCFM/Air** UL@120% Set Pres. Tank Surface Area (Sq. Ft.) MEVS-UVE433AM/ /4 MNPT 1-1/16 1, MEVS-UVE433AC/275* 275 3/4 MNPT 1-1/16 1, MEVS-UVE443AM/ MNPT 1-7/8 2, MEVS-UVE443AC/275* MNPT 1-7/8 2, MEVS-UVE453AM/ /4 MNPT 2-7/16 4, MEVS-UVE453AC/275* /4 MNPT 2-7/16 4, * California setting 275 psig ** Flow rates are shown for bare relief valves NOTE: Size relief capacity per NFPA58, table Semi-Internal Pressure Relief Valves are for used as a pressure relief device on stationary ASME containers and domestic tanks. Durable all brass body Sturdy construction; made with non-corrosive internal materials Furnished with rain/dust cap for protection against contamination Rain cap also available separately Supplied with Everseal pre-applied thread sealant Replacement Rain Cap MEPS A MEV200FIR/MEV300FIR Stainless steel body construction All stainless steel internal components for maximum corrosion resistance Nitrile, Viton, or Kalrez seals available Large seating surface for superior seal performance and reliability 250 and 265 PSI set pressures available Custom set pressures available MEVS-UVE433A MEVS-UVE453A Flanged Full Internal Pressure Relief Valves D Container Flow Capacity Service Seat Accessories STD/PSIG SCFM/Air** Connection Material 120% Set Pressure LPG NH 3 Cap MEV300FIR-3F/ ,865 Yes Nitrile MEV300FIR-3F/ ,600 Yes Nitrile MEV300FIRV-3F/ ,865 No Viton lb. Flange Yes MEV300FIRV-3F/ ,600 No Viton MEV300FIR-09 MEV300FIRK-3F/250* ,865 Yes Kalrez ~ MEV300FIRK-3F/265* ,600 Yes Kalrez ~ * Seat Material not UL Listed ** Flow rates are shown for bare relief valves *** Size relief capacity per NFPA , table ~ Recommended for LPG and NH 3 dual service applications Viton and Kalrez are trademarks of DuPont Performance Elastomers Universal Relief Valve Covers MEH502 Adjustable Relief Valve Cover 1/2 to 3/4 MEH503 Adjustable Relief Valve Cover 3/4 to 1-1/4 MEPS A Rain/Dust cap with lanyard to minimize cap loss. Protects against contamination. Application LPG Yellow Vinyl Semi-Internal Pressure Relief Valves are for used as a pressure relief device on stationary ASME containers and domestic tanks. MEVS-UVE443A MEH502 D MEV300FIR-3F Flanged Full Internal Pressure Relief Valves are for use in mobile LPG and NH 3 containers as a primary pressure relief valve for bobtail and transport trailer installations. All working components are internal to the container connection preventing damage to the valve should a roll-over incident occur. Marshall Excelsior s unique design incorporates a standard 3 ANSI lb. raised face flange connection to assure a 100% leak free connection for rugged over-the-road applications. This eliminates problems associated with NPT threaded connections and/or tank coupling wear due to vibration from over-the-road transit, providing maximum tank and relief valve service life. Durable all brass body Sturdy construction; made with non-corrosive internal materials Furnished with rain/dust cap for protection against contamination Marshall Excelsior s FlangeFull Internal Pressure Relief Valves have the same features as their Full Internal Pressure Relief Valves above. MEH

38 RELIEF VALVES RELIEF VALVES Hydrostatic Pressure Relief Valves Internal Pressure Relief Valves for ASME and DOT Containers CAVAGNA GROUP Body Material Seal Material Start-to- Discharge Setting PSIG Accessory Inlet MNPT A B C D Pipe-away Adapter MEH225 Brass Nitrile 440 1/4 1-1/16 13/16 1/4 9/16 Hex MEH225SS/350 Stainless Steel Nitrile 350**** 1/4 1-1/16 13/16 1/4 9/16 Hex MEH225SS/400 Stainless Steel Nitrile 400 1/4 1-1/16 13/16 1/4 9/16 Hex MEH225SS Stainless Steel Nitrile 440 1/4 1-1/16 13/16 1/4 9/16 Hex MEH25/450 Brass Nitrile 450 1/4 1-59/ /64 1/4 7/8 Hex MEP173* MEH25K/450 Brass Kalrez 450 1/4 1-59/ /64 1/4 7/8 Hex MEP173* MEH25V/450 Brass Viton 450 1/4 1-59/ /64 1/4 7/8 Hex MEP173* MEH50/460 Brass Nitrile 460 1/2 2-1/2 2-1/8 3/8 1-1/8 Hex MEP174** MEH75/460 Brass Nitrile 460 3/4 2-21/32 2-5/32 1/2 1-1/8 Hex MEP174** MEJ602H*** Brass Nitrile 440 1/4 * 1/4 FNPT Outlet ** 1/2 FNPT Outlet *** Factory Installed Vent Valve **** Special Applications Hydrostatic Pressure Relief Valves are designed to protect piping and shutoff valves from overpressure situations where liquid LP-Gas or NH 3 has the potential to be trapped. Valves provide pressure relief and protect against line or plumbing system failures. Container Start-to-Discharge UL* Flow ASME* Flow Wrench Connection Setting PSIG capacity SCFM/AIR capacity SCFM/AIR Hex Flat NPT 375 1, / /4 NPT 250 2,007 1, / NPT 250 2,757 2, / /4 NPT 250 4,312 3, / ** 1 NPT / ** 1 NPT / /4 NPT /16 *(at 120% of set pressure) **Fully internal Cavagna s Internal Pressure Relief Valves for ASME and DOT Containers are designed specifically for use as a primary pressure relief device on ASME containers up to 2,000 gallon water capacity. Furnished with rain cap for protection against contamination. See ordering information for part numbers. All these valves have a pre-applied sealant on the container connection. All these valves are ASME approved. Valve Cap MEH75 MEH50 MEH25 MEH225SS MEP173 Compact design to fit any application Stainless steel spring Non-adjustable, tamper resistant design Stainless steel models rated for LP-Gas and NH 3 Designed to increase flow at discharge Internal Pressure Relief Valves for DOT Fork Lift Cylinders Rain Cap CAVAGNA GROUP D External Pressure Relief Valves Bottom Male Connection Wrench Grip Hexagon CAVAGNA GROUP Thread PRV - Start to PRV-OVERPRESSURE 10% PRV Type Discharge CAPACITY Nm3/min. Approval Orifice (mm) Setting (PSIG) (If not specified otherwise) (mm) PRV 1/4-18 NPT 22 Taper (at 120% O.P.SCFM-AIR) UL/ASME PRV 1/4-18 NPT 22 Taper (at 120% O.P.SCFM-AIR) UL EU19 3/4 NPT Taper (at 20% O.P.SCFM-AIR) UL/ASME Container Start-to-Discharge UL (at 120% of Set Pressure) Wrench Connection Setting (PS) Flow Capacity SCFM/AIR Hex Flat 3/4 NPT /16 Internal Pressure Relief Valve for DOT Fork Lift Cylinders are designed specifically for use as primary relief valve on fork lift cylinders. A 45 deflector adapter is already included into the body of the valve. The design of the valve is a one-piece hot forged brass body. Internal Pressure Relief Valve for DOT Fork Lift Cylinders are designed specifically for use as primary relief valve on fork lift cylinders D Pressure Relief Valves are designed for small containers and on-line pipe installations. Setting point: 250 PSIG Pressure Relief Valves are for small containers and on-line pipe installations. Setting point: 375 PSIG

39 BYPASS VALVES BYPASS VALVES Bypass Valves for Bobtail Truck/Plant Applications High Flow Bypass Valves for Dispensing Applications ME840-16/125 Standard Spring Range* ME /4 FNPT High Flow Bypass Valve PSI ME /4 Socket Weld High Flow Bypass Valve PSI ME /2 FNPT High Flow Bypass Valve PSI ME /2 Socket Weld High Flow Bypass Valve PSI ME FNPT High Flow Bypass Valve PSI ME840C FNPT Classic Flow Bypass Valve PSI ME Socket Weld High Flow Bypass Valve PSI ME /4-2 Universal High Flow Bypass without Flanges PSI *Alternate spring ranges available Marshall Excelsior s High Flow Bypass Valves for Bobtail Truck/Plant Applications are specifically designed to protect truck and plant pumps from damage due to excessive pressure while providing the industry s best bypass flow rates across a full range of set pressures. They feature wide open flow channels with an orifice weep hole chamber to prevent the valve from slamming open/closed. The weep hole chamber also helps prevent valve seat chatter by allowing constant pressure communication between both the upstream and downstream side of the seat. Standard Spring Range* ME /4 FNPT High Flow Bypass Valve PSI ME FNPT High Flow Bypass Valve PSI * Alternate spring ranges available. These Marshall Excelsior Valves are intended for use in small cylinder filling applications as a bypass and primer valve for turbine style dispensing pumps. These bypass valves feature a special check ball mechanism that helps eliminate vapor from liquid while keeping the pump flooded and properly primed. The priming and vapor elimination features, in combination with the high flow bypass design, significantly reduces pump wear and promotes seal longevity. Ductile iron body and bonnet construction Large range of set pressure springs Two 1/4 FNPT plugged auxiliary pressure ports (outlet side) Stainless steel main valve poppet Heavy duty protective stem cap Available in 3/4 and 1 FNPT threaded versions Factory set at 125 PSI Durable powder coat finish ME840-6/150 All ductile iron body and bonnet Weldable steel NPT and socket weld flanges ME All stainless steel wetted component Heavy duty protective stem cap Wide open flow channels for industry best flow rates Orifice weep hole to maintain constant pressure above and below valve seat Large range of set pressure springs Zinc dichromate finish for maximum corrosion resistance Available with or without flanges factory assembled Flanges available 1-1/4 through 2 NPT and socket weld construction Universal 4 bolt, flanged body configuration Two 1/4 FNPT plugged auxiliary pressure ports Factory set at 125 PSI High Flow 3 Bypass Valve for Plant Applications Stainless Steel Integral Check Ball Seat ME D Standard Spring Range* ME FNPT High Flow Bypass Valve PSI ME FNPT High Flow Bypass Valve PSI D * Alternate spring ranges available. ME840C The 3 Bypass Valve is specifically designed for plant systems where maximum bypass flow is necessary to protect the pump from rapid pressure changes or over pressurization. Perfectly suited for 4 base mount pumps or larger pump applications. Ductile iron body and bonnet construction All stainless steel internal wetted components Bonnet/seat positioned at 35 angle for maximum product flow Downstream bleed port to boost product flow during bypass Two 1/4 FNTP plugged auxiliary pressure ports Heavy duty protective stem cap Factory set at 100 PSI Durable powder coat finish ME840-24/

40 BYPASS VALVES BYPASS VALVES High Flow Maximum Flow Through Bypass Valves BLACKMER Bypass Valve CORKEN BV0.75 BV1 BV1.25 BV1.5 Ports 3 4 NPT Tapped 1 NPT Tapped 1-1/4 NPT Tapped 1-1/2 NPT Tapped Maximum Rated Flow* - GPM 20 PSI 50 PSI 80 PSI 120 PSI (1.38 Bar) (3.45 Bar) (5.52 Bar) (8.27 Bar) 25 (95) 40 (151) 50 (189) 60 (227) 60 (227) 80 (303) 100 (379) 125 (473) BV2 2 NPT Companion Flanges** 150 (568) 180 (681) 220 (833) 250 (946) *Normal maximum bypass flow rates without significantly exceeding the set pressure limit ** inch and inch NPT and WELD bolt-on flanges are available Standard Spring Range* ZV200 2 NPT Low Pressure Build-up Bypass Valve PSI *Alternate spring ranges available Corken s Low Pressure Build-up Bypass Valves are specifically designed for applications requiring protection for positive displacement pumps. The valves protect pumps with capacities up to 250 GPM (946 L/min). The continuous internal bleed will assist in the operation of systems with air or electric operated internal valves, equalizing pressure. Typical applications include bobtail, transport and stationary loading and unloading of LPG, NH 3 and other light liquids. BV.075 / BV1 Blackmer Bypass Valves provide exceptionally close pressure control, even under widely varying bypass flow conditions. They are designed to protect pumps and system components from excessive pressure damage, and no LP gas pump installation is complete without one. The valves do not have small, easily plugged, sensing passages; and with only two moving parts, their operation is simple and reliable. They open precisely at the preset spring pressure, and they close smoothly and quietly, thanks to a patented dash-pot design. A small chamber in the valve stem fills with liquid when the valve opens. This liquid then provides a hydraulic cushion preventing the valve from slamming shut if pressure is suddenly released. It also minimizes chatter and valve seat wear when pressures hover around the crucial limit. All ductile iron body Flow rates up to 250 GPM (946 L/min) at 120 PSI (8.3 bar) differential Multiple spring options to select required pressure for truck or stationary application Multiple flange options: 1-1/4, 1-1/2, 2, 2-1/2 NPT and weld flanges Dual inlet and outlet gauge openings No unions necessary for installation ZV200 BV0.75 and BV1 Bypass Valves Used for cylinder-filling system May be used with 1-1/4 or 1-1/2 Blackmer pump models BV1.25 and BV1.5 Used for bobtail trucks and smaller bulk plant systems May be used with 2 or 3 Blackmer pump models BV2 Used for transports or larger bulk plant systems PSI is set at 125 Recommended for use with 3 and 4 Blackmer pump models Automatic Dual-Purpose, Bypass Valve Inlet Outlet Slip-on Weld Flange Differential Pressure Range PSI B166 3/4, 1 3/4, 1 No ( ) CORKEN Automatic Dual-Purpose, Bypass Valves are typically used for cylinder filling pumps and aerosol propellant feed pumps. The valves are a combination bypass and priming valve specifically designed for small cylinder-filling-type pumps, especially of the regenerative turbine type, such as the Corken Coro-Flo pump series with flows up to 40 GPM (9.1 m3/hr). The patented vapor elimination system keeps liquefied gas pumps primed to increase system reliability and decrease pump and seal wear. The B166 is a smooth operating bypass with moderate pressure buildup. D Bypass/Pressure Relief Valve BLACKMER B166 D Porting Max. Flows RV18 DN 25/1 flanged ANSI 300 screwed NPT(F) 200 L/min (52.83 gpm) RV19 DN 38/1-1/2 flanged ANSI 300 screwed NPT(F) 600 L/min (158.5 gpm) Pump Flow Control Valve CORKEN The Ebsray Bypass/Pressure Relief Valves are specifically designed for a wide variety of industrial services. The easily adjustable differential-pressure settings provide accurate and repeatable performance that enables full pump flow while maintaining controlled preset maximum pressure. Inlet Outlet Slip-on Weld Flange Differential Pressure Range PSI T /4, 1-1/2 1-1/4, 1-1/2 No ( ) RV Series Features & Benefits 90º porting arrangement Flanged ANSI Class 300 or threaded (NPT) ports available for most models Adjustable pressure setting within spring range for optimum dispensing flow rates Low pressure rise Pressure Casings: Ductile iron to ASTM A395 Elastomers - Viton as standard Diff. pressures to 14 bar (200 psi) Hydrostatic test pressure: 70 bar (1,016 psi) Optional valve types-application dependent: CBS - Constant Bleed System VRS - Vapour Removal System NRV - Non-Return Valve Pump Flow Control Valves are typically used for large-capacity pumps filling variable size tanks and bottles such as those used with delivery trucks or multiple cylinder filling plants. A highpressure build-up valve for smooth acting flow control. The T166 is specifically designed for bypass protection for pumps in the GPM ( m3/hr) range, such as those used on delivery trucks. In contrast to the B177, the T166 valve opens gradually as pressure builds up to modulate the flow, bypassing the excess capacity smoothly and silently back to the supply tank. A continuous internal bleed in this valve assists in eliminating vapors. T

41 BYPASS VALVES EXCESS FLOW VALVES Differential Bypass Valve CORKEN Excess Flow Valves Excela-Flange Series B177 Inlet Outlet Slip-on weld flange Differential Pressure Range PSI B177 EXCESS FLOW VALVES 1-1/4, 1-1/2 1-1/4, 1-1/2 No , 2-1/2 2, 2-1/2 (0.7-11) Differential Bypass Valves are typically used in liquefied-gas bulk-plant installations for loading and unloading pumps. The B177 is a low-pressure build-up bypass valve specifically designed for applications requiring protection for positive displacement pumps in the GPM ( m3/hr) range. It can also be used as a differential back-pressure valve to assure adequate pressure on meters, etc. To function properly, this valve requires a pressure sensing line from the storage tank. Material Closing Flow ME883S-16/80 80 ME883S-16/ ME883S-16/114 Excela-Flange 2 MNPT x 4 Bolt Type A Flange Excess Flow Ductile 114 ME883S-16/ MEP873 MEP Mating Flange Type 4 Bolt Type A Flange Valve Installation Tool with 1 Square Drive Replacement Torque Posts Weight (lbs.) B 4.23 **WARNING - Reducing outlet pipe size below 2 nominal diameter could result in excess flow feature failing to close as designed Liquid Butane Capacity = Flow Rate x.94 Liquid Anhydrous Ammonia Capacity = Flow Rate x.90 D ME880 Series ME880S Series Excess Flow Valves Inlet Closing Flow Porting Brass Steel* Stainless Steel* MNPT GPM Propane ME880-4/1.8 1/4 1/4 1.8 ME880-6/4.6 ME880S-6/4.6 ME880SS-6/4.6 3/4 3/4 4.6 ME880-6/14 ME880S-6/14 ME880SS-6/14 3/4 3/4 14 ME880-6/17 ME880S-6/17 ME880SS-6/17 3/4 3/4 17 ME880-6/22 ME880S-6/22 ME880SS-6/22 3/4 3/4 22 ME880-6/28 ME880S-6/28 ME880SS-6/28 3/4 3/4 28 ME880-10/32 ME880S-10/32 ME880SS-10/32 1-1/4 1-1/4 32 ME880-10/42 ME880S-10/42 ME880SS-10/42 1-1/4 1-1/4 42 ME880-12/95 1-1/2 1-1/2 95 ME880-16/80 ME880S-16/80 ME880SS-16/ ME880-16/105 ME880S-16/105 ME880SS-16/ ME880-16/114 ME880S-16/114 ME880SS-16/ ME880-16/140 ME880S-16/140 ME880SS-16/ ME882S-16/ MNPT 80 ME882S-16/ MNPT 105 ME882S-16/ MNPT 114 ME882S-16/ MNPT 140 ME880S-24/ ME880S-24/ ME882S-24/ MNPT/2 FNPT 265 ME882S-24/ MNPT/2 FNPT 350 Liquid Butane Capacity = Flow Rate x.94 Liquid Anhydrous Ammonia Capacity = Flow Rate x.90 Marshall Excelsior offers the largest closing flow selection in the industry. These excess flow valves are intended for use in liquid or vapor LP-Gas or NH 3 systems. These valves can be used for filling, withdrawal and vapor equalization in containers or line applications, specifically long lines or branch piping. This product is designed to protect against excessive discharge as a result of a break in the hose or piping system. The excess flow feature is designed to remain closed after activation until the system pressure equalizes on both sides of the shutoff poppet. The ME883S-16 Series valves feature our new modular Excela-flange 4 bolt inlet flange design that can be easily adapted to both NPT thread or socket weld type B companion flanges ranging from 1-1/4 to 2 in diameter making it universal to piping sizes within this range. This innovative system allows installers the ability to eliminate unnecessary extra connections as well as possible leak points by integrating a convenient 4 bolt flange union at the valve inlet. All models feature stainless steel stem, spring and valve guide Valve body: Ductile Iron/Shutoff poppet assembly: zinc plated steel and stainless steel Available 2 NPT x 4 Bolt Type A Flange All models can be used with LP Gas or NH 3 Available in a wide variety of closing flow rates ME883S-16/105 2 NPT x 4 Bolt Flange Excess Flow Valve D ME882S Series Marshall Excelsior s Excess Flow Valves in the industry. These valves are used in liquid or vapor LP-Gas or NH 3 systems as well as for filling, withdrawal and vapor equalization in containers or line applications, specifically long lines or branch piping. This product protects against excessive discharge as a result of a break in the hose or piping system. The excess flow feature remains closed after activation until the system pressure equalizes on both sides of the shutoff poppet. MEP873 WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. (For more information: Integral breakaway feature leaves valve assembly intact with internal hex broach for easy removal All stainless steel internal components Internal Hex Broach 75 76

42 EXCESS FLOW VALVES BACK CHECK VALVES Excess Flow Valve for Liquid or Vapor CAVAGNA GROUP High Flow Back Check Valves Material Material Inlet Outlet Wrench Connection Connection Hex Flats Inlet Outlet Wrench Connection Connection Hex Flats Approximate Closing Flows Length Liquid (GPM Propane) PSIG Inlet PSIG Inlet Steel 1-1/4 1-1/ / ,750 9, Steel 1-1/4 1-1/ / ,500 13, Steel 1-1/4 1-1/ / ,800 15,970 Excess Flow Valve Excess Flow Valve for Liquid or Vapor Withdrawal Cavagna Excess Flow Valves are designed for liquid or vapor fill/withdrawal and for vapor equalization in containers or line applications. They are intended to close when the liquid or vapor passing through the hose or the piping system exceeds the prescribed flow rate. Valves are available in different sizes and body configurations. Once the flow exceeds the valve s setting, the valve closes and will remain closed until the system equalizes. Once the pressure on both sides of the poppet is equal, a built-in equalizing passage automatically opens the valve. CAVAGNA GROUP Approximate Closing Flows Liquid (GPM Propane) PSIG Inlet PSIG Inlet Steel 1-1/4 1-1/4 1-7/ ,600 18, Steel 1-1/4 1-1/4 1-7/8 55 3,830 6,760 Excess Flow Valves for Liquid or Vapor Withdrawal are designed to be mounted on the bottom of storage tanks for liquid service. They may also be mounted on the top for vapor service. Outlet Propane 10 PSIG Inlet FNPT Brass Steel* Stainless Steel* MNPT Pressure Differencial ME870-6 ME870S-6 ME870SS-6 3/4 3/4 24 ME ME870S-10 ME870SS /4 1-1/4 61 ME /2 1-1/2 112 ME ME870S-16 ME870SS ME872S-16 2 MNPT ME870S ME872S-24 2 FNPT/ 3 MNPT ME872S-24SP** 2 FNPT *Rated for LP-Gas & NH 3 **Includes removable o-ring High Flow Back Check Valves with Bonded Soft Seat Outlet Propane 10 PSIG Inlet FNPT Brass Steel* Stainless Steel* MNPT Pressure Differencial ME870SBN /4 1-1/4 61 ME870SBN ME872SBN-16 2 MNPT ME870SBN-24** ME872SBN-24 2 FNPT/ 3 MNPT ME872SBN-24SP 2 FNPT *Rated for LP-Gas & NH 3 **Includes removable o-ring Liquid Butane Capacity = Flow Rate x.94 Liquid Anhydrous Ammonia Capacity = Flow Rate x.90 Marshall Excelsior s Back Check Flow Valves lead the industry with up to 20% more flow than the nearest competitor. These valves provide flow protection to container openings or liquid lines where flow is intended for one direction. The valve is normally closed until pressure activates the valve when flow is directed into piping or containers causing the back check to open. When flow stops or reverses, the check returns to the closed position. ME870 Series Shown with O-ring Soft Seat ME870S Series Shown with O-Ring Removed for Metal-to-Metal Seat ME870SBN-24 Shown with Bonded Soft Seat D These valves come with dual seating capabilities or an optional bonded soft seat on 2 and 3 models. With the dual seating capabilities, the factory installed O-ring provides a leak-free, soft seat seal which enables repair and maintenance to be done on depressurized plumbing. Remove the O-ring to allow metal-to-metal seating with a minimal leak seal to restrict flow in case of a break in the line. ME872S-16 D NOTE: Leaving the O-ring soft seat installed on the valve will require a minimum of 15 PSIG pressure differential between the transfer line and container to unseat the valve and allow it to fully open. Excess Flow Valves Up to 20% More Flow than nearest competitor Maximum flow achieved by full port and increased stem travel design All stainless steel internal components Integral breakaway feature leaves valve assembly intact with internal hex broach for easy removal Dual purpose seat reduces inventory from 2 to

43 BACK CHECK VALVES BACK CHECK FILL VALVES High Flow Back Check Valves - Excela-Flange Series High Flow Double Back Check Fill Valves D Material Propane 10 PSIG Pres. Dif. Mating Flange ME873S-10 Excela-Flange TM 1-1/4 MNPT x 4 Bolt Type A Flange Back Check Valve ME873SBN-10 Excela-Flange TM 1-1/4 MNPT x 4 Bolt Type A Flange Back Check Valve (SBN) Bonded Seat ME873S-16 Excela-Flange TM 2 MNPT x 4 Bolt Type A Flange Back Check Valve Ductile B ME873SBN-16 Excela-Flange TM 2 MNPT x 4 Bolt Type A Flange Back Check Valve (SBN) Bonded Seat ME873S-24 Excela-Flange TM 3 MNPT x 4 Bolt Type A Flange Back Check Valve ME873SBN-24 Excela-Flange TM 3 MNPT x 4 Bolt Type A Flange Back Check Valve (SBN) Bonded Seat Liquid Butane Capacity = Flow Rate x.94 Liquid Anhydrous Ammonia Capacity = Flow Rate x.90 Replacements o-rings available upon request. See Replacement Parts section. ME873S-24 ME873SBN -24 (SBN - Bonded Seat) ME873S-16 Weight (lbs.) The ME873S Series valves feature our new modular Excela-flange 4 bolt inlet flange design that can be easily adapted to both NPT thread or socket weld type B companion flanges ranging from 1-1/4 to 2 in diameter making it universal to piping sizes within this range. This system allows installers to eliminate unnecessary connections as well as possible leak points by integrating a convenient 4 bolt flange union at the valve inlet. These valves provide back flow protection to container openings or liquid lines where flow is intended for one direction. The valve is normally held closed until pressure activates the valve when flow is directed into piping or containers causing the back check to open. When flow stops or reverses, the check returns to the closed position. All MEC High Flow Back Check valves are supplied with o-ring soft seats, which can be removed for metal to metal seating. Universal seat - Remove O-ring seal to create metal to metal seating surface or (SBN) bonded seat Up to 20% MORE FLOW than nearest competitor Maximum product flow achieved by full port and stem travel design All models feature stainless steel stem, spring and valve guide High Flow Back Check Valves - Excela-Flange Series - Socket Weld Inlet Socket Weld Outlet Socket Weld Valve body: Ductile Iron/Shutoff poppet assembly: steel and stainless steel Available in 1-1/4 NPT, 2 NPT and 3 NPT x 4 Bolt Type A Flange All models can be used with LP Gas or NH 3 Universal 4 bolt flange inlet type A Available with permanently bonded on main valve seals (SBN) Propane 10 PSIG Pressure Differetial Weight (lbs.) ME870SW-16 2 Female 2 Male Liquid Butane Capacity = Flow Rate x.94 Liquid Anhydrous Ammonia Capacity = Flow Rate x.90 Propane Flow Differential Pressure 10 PSI 25 PSI 50 PSI ME869-10/10 1-1/4 MNPT x 2-1/4 M. Acme ME869-10/8 1-1/4 MNPT x 1-3/4 M. Acme ME MNPT x 3-1/4 M. Acme ME MNPT x 3-1/4 M. Acme High Flow Double Back Check Valves provide back flow protection to container openings or liquid lines where flow is intended in one direction. The valve is normally held closed until pressure activates the valve when flow is directed into piping or containers causing the double back check to open. When flow stops or reverses, both checks return to the closed position. All MEC High Flow Double Back Check Valves are supplied with the correct ACME cap and chain assembly, as well as factory installed hydrostatic relief protection. Primary seat creates metal-to-metal seating surface Secondary seat is bonded Nitrile soft seat for a leak free seal Up to 20% more flow than nearest competitor High Flow Single & Double Back Check Fill Valves Maximum product flow achieved by full port and stem travel design Stainless steel stem, spring and valve guide in body check assembly Built-in hydrostatic relief valve ONLY for use with LP Gas Differential Flow 10 PSI ME3194C Single Back Check Fill Valve 3-1/4 M. Acme x 3 MNPT 365 ME3197C Double Back Check Fill Valve 3-1/4 M. Acme x 3 MNPT 285 NOTE: For use with LPG only Marshall Excelsior High Flow Single and Double Back Check Fill Valves provide back flow protection to container openings or liquid lines where flow is intended in one direction. The valve is normally held closed until pressure activates the valve when flow is directed into piping or containers causing the back check to open. When flow stops or reverses, the check returns to the closed position. All MEC high flow back check Valves are supplied with the correct ACME cap and chain assembly. ME869-10/8 ME ME ME3197C D ME870SW-16 Excela-Flange High Flow Socket Weld Back Check Valves provide flow protection to container openings or liquid lines where flow is intended for one direction. The valve is normally closed until pressure activates the valve when flow is directed into piping or containers causing the back check to open. When flow stops or reverses, the check returns to the closed position. Featuring socket weld connection points, these valves are ideally suited for inline applications where welded piping construction is desired. Only available with metal-to-metal seat. Maximum flow achieved by full port and increased stem travel design Integral breakaway feature leaves valve assembly intact All stainless steel internal components High temperature Inconel spring withstands heat from welding Double check primary seat creates metal to metal seating surface Double check secondary seat is a soft seat for a leak free seal Up to 30% MORE FLOW than nearest competitor Maximum product flow achieved by full port and maximum stem travel design All models feature a brass stem, stainless steel spring and bronze valve guide in body check assembly For use with LP Gas Only ME3194C 79 80

44 BACK CHECK VALVES VENT VALVES Back Pressure Valves CAVAGNA GROUP Vent Valves Material Inlet Outlet Wrench Connection Connection Hex Flats Length Propane Liquid Capacity at different r Pressure 5 PSIG 10 PSIG 25 PSIG Steel 3/4 F NPT 3/4 M NPT 1-3/8 1-15/16 (49.2 mm) Steel 1-1/4 F NPT 1-1/4 M NPT 2 2-1/2 (63.5 mm) Steel 2 F NPT 2 M NPT 3 3 3/8 (83.5 mm) Cavagna Back Pressure Valves are intended to prevent liquid discharge when the desired flow is directed into the vessel thereby allowing the flow in only one direction. When coupled with the appropriate single check filler valve, the combination forms a double check filler valve suitable for use in filling of bulk storage tanks. Brass Brass Replacement Stems Stainless Steel* Type MEJ400/72 MEJ401 Low Emission #72 Orifice MEJ400SC MEJ401SC Self-Cleaning, Low Emission #54 Orifice MEJ400 MEJ401, MEJ401SC MEJ402S Standard #54 Orifice MEJ400C Captured Stem, Standard #54 Orifice MEJ602H*** MEJ400, MEJ401, MEJ401SC 90 Elbow w/hydrostatic Relief MEJ606 MEJ400, MEJ401, MEJ401SC 90 Elbow, 1/4 MPT x 1/4 M. Flare MES-PVE10ARF 1/4 MNPT X, 1/4 M. Flare * Rated for LP-Gas and NH 3 **Factory Installed Vent Valve Marshall Excelsior is the only manufacturer in the industry that offers three types of vent valves Low Emission, Self-Cleaning Low Emission, and Standard Vent Valves. All of these vent valves are designed to minimize loss of product while allowing the operator to effectively bleed down connections and detect liquid levels while filling containers. Vent valves provide an effective means to verify valves have closed in the transfer system when installed into the downstream auxiliary port on the Marshall Excelsior globe and angle valves. Opening the vent valve until liquid or vapor stops venting indicates it is safe to disconnect. D Back Pressure Valve NEEDLE VALVES ME831S ME832 Back Pressure Valve Needle Valves Back Pressure Valve Material ME831 Needle Valve 1/4 MNPT x 1/4 FNPT Brass ME832 Needle Valve 1/4 MNPT Outlet x #80 Orifi ce 1-20 F. Inlet Brass ME833 Needle Valve 1/4 MNPT Outlet x 1-20 F. Inlet Brass ME834 Needle Valve 1/4 MNPT x 9/16-18 LH Male Brass ME831S Needle Valve 1/4 MNPT x 1/4 FNPT Plated Steel ME831SS Needle Valve 1/4 MNPT x 1/4 FNPT Stainless Steel Needle Valves are intended for applications where precise control of gas output is required. These precision machined valves offer a wide range of adjustment without stem galling. Perfect for isolating pressure gauges from bulk storage containers or upstream shutoff valves for torches and/or outdoor burner applications. Available in brass, plated steel and stainless steel construction Tapered valve body seat and stem for precision accuracy Various inlet/outlet configurations available ME831 and ME834 series valves approved for bi-directional flow All brass versions have knurled stems that completely unscrew from the valve making the stems replaceable. The stainless steel version has a t-handle stem that is non-removable. The Low Emission Vent Valve and the Self-Cleaning Low Emission Vent Valve reduce emissions by 70% during normal container filling operations. The Self-Cleaning Low Emission Vent Valve cleans out the orifice hole each time it is operated. The hole is cleaned out with a #54 orifice drill that reams the valve s orifice hole each time the adjusting screw is loosened or tightened, eliminating nuisance orifice clogging. The reduced venting emissions is achieved by forcing product to pass between the #54 orifice hole and the flutes of the captured self-cleaning apparatus. The self-cleaning replacement screw (MEJ401SC) is compatible with all existing standard vent valve bodies allowing a standard vent valve to be converted into a self-cleaning low emission vent valve without reinstalling the valve body. The Standard Vent Valve has a #54 orifice with no self-cleaning apparatus. The Low Emission Vent Valve has a #72 orifice. 70% emission reduction with self-cleaning and low emission vent valves 1/4 MNPT Connection Available with dip tubes MES-PVE10ARF MEJ602H MEJ400SC Patent Pending MEJ401 Self-Cleaning D Self-Cleaning MEJ606 MEJ402S MEJ400/72 MEJ400 MEJ401SC Patent Pending 81 82

45 VENT VALVES 4 BOLT & SOCKET WELD ADAPTERS Fixed Maximum Liquid Level Gauges High Flow Socket Weld Bodies Excela-Flange Series Type 5.4 Tube Length Brass 5.7 Tube Length Brass 6.6 Tube Length Brass 6.9 Tube Length Brass 12 Tube Length Brass 12 Tube Length Stainless Steel* Low Emission #72 Orifice MEJ410/ MEJ410/ MEJ410/ MEJ410/ MEJ410/ Self-Cleaning Low Emission #54 Orifice MEJ410SC-5.4 MEJ410SC-5.7 MEJ410SC-6.6 MEJ410SC-6.9 MEJ410SC-120 #54 Orifice MEJ MEJ MEJ MEJ MEJ MEJ402S-120 Captured Stem #54 Orifice MEJ410C-5.4 MEJ410C-5.7 MEJ410C-6.6 MEJ410C-6.9 MEJ410C-120 * Rated for LP-Gas and NH 3 MEJ410 Series Fixed Maximum Liquid Level Gauges are designed to provide a way to visually determine that a tank has reached maximum allowable fill capacity. The dip tube end of a fixed liquid level gauge should be set equal to 80% of the liquid level tank capacity and installed in the vapor space of the tank. The vent valve should be opened before filling begins during which time vapor will be discharged. Once the tank reaches maximum liquid fill capacity (80% of tank capacity), liquid will begin to discharge from the vent valve telling the operator the tank has reached maximum allowable fill capacity and the filling operation should cease immediately. MEC Excela-Flange High Flow Socket Weld Tees Weight (lbs.) MEP995S-16 Excela-Flange 2 x 2 x 2 Socket Weld High Flow Tee Body-Steel 6.1 MEP995SBW-16 Excela-Flange 2 x 2 x 2 Butt Weld High Flow Tee Body-Steel 4 MEP995S-24/16 Excela-Flange 3 x 2 x 2 Socket Weld High Flow Tee Body-Steel 7.8 MEC Excela-Flange High Flow Socket Weld Elbows Weight (lbs.) MEP996S-16 Excela-Flange 2 x 2 Socket Weld High Flow Elbow Body-Steel 3.8 MEP996SBW-16 Excela-Flange 2 x 2 Butt Weld High Flow Elbow Body-Steel 2.5 MEP996S-24 Excela-Flange 3 x 3 Socket Weld High Flow Elbow Body-Steel 6.7 NOTE: Available in Stainless Steel i.e. MEP995SS-16 These Tees and Elbows are available in both 2 and 3 socket weld or butt weld pipe configuration and maximize flow through system piping where a 90 turn must be made. Flow rates are maximized by an optimized flow path as well as nearly seamless piping joints reducing turbulence and focusing flow through the system. Ideally suited for pump discharge lines, transport loading/unloading tee assemblies, spray fill lines or any other piping application where piping is welded and high flow rates are desired. MEP996S-16 2 F. Socket Weld X 2 F. Socket Weld Tee MEP995S-24/16 3 F. Socket Weld X (2 ) -2 F. Socket Weld Tee All steel construction for maximum durability and weldability Available in 2 and 3 socket weld or butt weld configurations Coated for maximum corrosion resistance Approved for use in LPG or NH 3 service Rated 400 WOG MEP995SBW-16 3 F. Butt Weld X (2 ) -2 F. Butt Weld Tee D Fixed Liquid Level Gauges Container Connection Outlet Connection DT Length /4 MNPT Without /4 NPTF 1/4 SAE Flare Without Special DT length can be ordered Optional instruction plate may be ordered CAVAGNA GROUP Valves incorporate a No. 54 drill size orifice High Flow 4 Pump Auxiliary Suction Intake Flange Adapters Weight (lbs.) MEP998 Excela-Flange 3-4 Bolt (Type A) x 2-4 Bolt (Type A) Auxiliary Suction Intake 6.25 MEC s Excela-Flanger High Flow 4 Pump Auxiliary Suction Intake Flange Adapters are specifically designed to bolt directly to 3-4 bolt flange auxiliary suction intake openings on standard 4 flange mount mobile transport trailer pumps to eliminate unwanted threaded joints. The MEP998 is equipped with a 4 bolt type A flange inlet for mounting to either ME842 or ME843 series Excela-Flange companion flanges where additional piping is desired or direct bolt onto ME819P Series Excela-Flange globe valves for a worry-free easy to maintain auxiliary intake assembly. Zinc plated ductile iron body Approved for use in LPG or NH3 service Rated 400 WOG For use with all Type B (ME842 and ME843 Series) companion flanges MEP998 D 83 84

46 4 BOLT & SOCKET WELD ADAPTERS High Flow Cross-Over Self Loading Intake Adapter 4 BOLT & SOCKET WELD ADAPTERS 4 Bolt Unions & Companion Flanges MEP997-24/16 3 Socket Weld X (2) 2 Socket Weld X 2-4 Bolt (Type B) Flange Adapter MEC Excela-Flange High Flow Cross-over Self Load Intake Adapter Weight (lbs.) MEP997S-24/16 Excela-Flange 3 Socket Weld x (2) 2 Socket Weld x 4 Bolt (Type B) Flange Intake Adapter - Steel 10 NOTE: Available in Stainless Steel construction. To order Stainless Steel add SS after the prefix part number - i.e. MEP995SS-16 MEC s Excela-Flange Series 3 X 2 X 2 X 4-Bolt Flange High Flow Cross-Over Self Loading Intake Adapters are specifically designed to allow for high flow liquid transfer in auxiliary self load cross-over line applications on mobile transport trailers. The MEP997S-24/16 is equipped with a 3 socket weld connection, to allow direct connection to ME994S-3F Series Excela-Flange Internal Valves and (2) 2 socket weld discharge ports as well as an auxiliary 4 bolt (type B) intake flange. The 4 bolt (type B) intake flange allows for maximum product flow, while providing a convenient flange union for system maintenance. Zinc plated steel body Approved for use in LPG or NH 3 service Rated 400 WOG For use with all Type A (ME840 and ME841 Series) companion flanges MEC Flat Face Flanges Flange Weight Type (lbs.) ME /4 FNPT Tapped 4 Bolt Flat Face Flange Adapter B 2.7 ME /4 Socket Weld 4 Bolt Flat Face Flange Adapter B 2.6 ME /2 FNPT Tapped 4 Bolt Flat Face Flange Adapter B 2.6 ME /2 Socket Weld 4 Bolt Flat Face Flange Adapter B 2.5 ME FNPT Tapped 4 Bolt Flat Face Flange Adapter B 2.2 ME Socket Weld 4 Bolt Flat Face Flange Adapter B 2.0 MEC Universal Flange Kit Flange Weight Type (lbs.) ME840-10F 1-1/4 FNPT 4 Bolt Flange Adapter Plate w/bolts & O-Ring A 3.0 ME841-10F 1-1/4 Socket Weld 4 Bolt Flange Adapter Plate w/bolts & O-Ring A 2.9 ME840-12F 1-1/2 FNPT 4 Bolt Flange Adapter Plate w/bolts & O-Ring A 2.8 ME841-12F 1-1/2 Socket Weld 4 Bolt Flange Adapter Plate w/bolts & O-Ring A 2.7 ME840-16F 2 FNPT 4 Bolt Flange Adapter Plate w/ Bolts & O-Ring A 2.5 ME841-16F 2 Socket Weld 4 Bolt Flange Adapter Plate w/bolts & O-Ring A 2.3 MEP /4 FNPT 4 Bolt 90 Flange Adapter Elbow w/bolts & O-Ring A 4.8 MEP /4 Socket Weld 4 Bolt 90 Flange Adapter Elbow w/bolts & O-Ring A 4.7 MEP /2 FNPT 4 Bolt 90 Flange Adapter Elbow w/bolts & O-Ring A 4.6 MEP /2 Socket Weld 4 Bolt 90 Flange Adapter Elbow w/bolts & O-Ring A 4.6 MEP FNPT 4 Bolt 90 Flange Adapter Elbow w/bolts & O-Ring A 4.3 MEP Socket Weld 4 Bolt 90 Flange Adapter Elbow w/bolts & O-Ring A 4.2 NOTE: Flanges available in Stainless Steel i.e. ME841SS-16F D The 4 Bolt Unions can be used anywhere system piping needs to be joined together between shut off valves. Using piping unions such as these significantly improves the ease by which maintenance can be performed particularly where long runs or multiple directional changes are necessary. Our flange unions feature a captured o-ring design, hardened mounting bolts, and are available in NTP or Socket Weld configurations. Suitable for use in mobile or stationary applications. All steel construction for maximum durability and weldability Available in 1-1/4 to 2 FNPT or Socket Weld configurations Zinc plated flange faces for maximum corrosion resistance No plating on weld surfaces for improved weld quality with minimum weld prep Approved for use in LPG or NH3 service Rated 400 WOG D ME841-16F Type A Flange (Requires purchase of flat face flange) ME Type B Flange (Requires purchase of mating kit) MEP997-24/16 MEP840/MEP

47 4 BOLT & SOCKET WELD ADAPTERS GLOBE & ANGLE VALVES High Capacity 3 Bobtail Pump Discharge Elbows Excela-Flange Series High Flow Globe & Angle Valves Overview MEC Excela-Flange High Capacity Pump Discharge Elbows Fits Pump Model(s) MEP840H-16 2 FNPT 4 Bolt Type A High Capacity 90 Flange Adapter Elbow with 1/2-13 Bolts and O-Ring MEP841H-16 2 Socket Weld 4 Bolt Type A High Capacity 90 Flange Adapter Elbow with 1/2-13 Bolts and O-Ring TLGLF3 MEP840HC-16 2 FNPT 4 Bolt Type A High Capacity 90 Flange Adapter Elbow with 3/8-16 Bolts and O-Ring MEP840HC-16 2 Socket Weld 4 Bolt Type A High Capacity 90 Flange Adapter Elbow with 3/8-16 Bolts and O-Ring Z3200 NOTE: Flanges available in Stainless Steel i.e. ME841SS-16F Marshall Excelsior offers three types of globe and angle valves a (standard, integrated pilot feature (P) or integrated back check feature (IBC)) depending on the intended application. All Marshall Excelsior globe and angle valves are designed to withstand extreme temperatures and can increase flow up to 70 percent over a standard globe valve. The 35 degree seat angle on the 1-1/4 and larger globe valves make them ergonomically designed for bobtail, transport and bulk plant applications. This 35 degree seat angle also allows up to 70 percent more flow. The 1-1/4 and larger globe and angle valves have an optional 360 degree rotating ME829 knob. MEP841H-16 These High Capacity Bobtail Pump Discharge Elbows are designed to maximize the efficiency and flow rate at the outlet of the pump while minimize pressure loss due to the 90 degree directional change at the pump outlet needed to direct product to the rear of the vehicle where it is being dispensed. The MEP840H has carefully modeled radiuses and contours that allow it to flow over 50% more than other standard discharge elbows with 50% less pressure differential, thereby minimizing pump wear and maximizing pumping efficiency. When paired with other Excela-FlangeTM products the bobtail can perform up to its full potential. The MEP840H series is standard with a 1/4 FNPT plugged test port and is available with NPT or socket weld outlet. Suitable for use in mobile or stationary applications. All steel construction for maximum durability and weldability Available in 2 FNPT or 2 Socket Weld configurations Zinc plated for maximum corrosion resistance Approved for use in LPG or NH 3 service Rated 400 WOG Includes mounting bolts and O-ring 1/4 FNPT plugged test port To increase the longevity of the seal, all Marshall Excelsior globe and angle valves have a 360 degree rotating seal that stops rotating when it contacts the sealing surface while the valve continues to be tightened. The 1-1/4 and larger models feature ball bearings to facilitate increased seal life. All 1-1/4 and larger globe and angle valves come with an upstream and downstream plugged port. The boss of these ports are large enough to drill and tap a 3/4 FNPT hole for a jumper line or standard by-pass valve. These valves are mainly used in piping systems to control liquid or vapor flow in bulk plants, bobtails, transports, pumps or compressors. Globe valves are designed to be installed in a straight section of piping and angle valves are designed to be installed when a 90 degree directional change is needed in the piping. Change the sealing compound and Marshall Excelsior s globe and angle valves can be used in numerous industries including, but not limited to LP-Gas, anhydrous ammonia, petrochemical and chemical applications. The standard seal compound is Nitrile with Teflon or Viton also available. Contact us if you have a need for a different seal compound. Marshall Excelsior valves are designed to be hand tightened. Using wrenches or excess force to open or close the valve can cause damage to the seal, decreasing the valve s life. D Standard Elbow 310 GAL/MIN INSTALLATION NOTE: Before installing a globe or angle valve, the piping system and container must be free of dirt, debris, foreign matter and other particles, large or small, that could damage the sealing surface or seal of the valve. A minimal amount of pipe sealant should be used on the mating part. Excess pipe sealant can also cause damage to the seal surface or seal. Damage to the sealing surface or the seal will cause the valve to leak. To avoid damage to the valve or piping, due to pressure build-up from temperature changes, a hydrostatic relief valve should be installed where liquid can be trapped between two shutoff valves. New packing design for improved reliability D 5 PSI Differential Liquid Propane MEP841H GAL/MIN A vent valve should be installed on the downstream side of the globe or angle valve if the angle valve is used as a shutoff valve at the end of a loading hose. This allows the operator to vent the rapped liquid before disconnect. 35 seat angle increases flow & improves ergonomics Stainless steel internal components ME829 E-Z Turn Knob Rotating seat disc increases life of seal Up to 70% more flow Black hard coat for increased durability 87 88

48 GLOBE & ANGLE VALVES GLOBE & ANGLE VALVES High Flow Globe & Angle Valves Excela-Flange Series High Flow Globe & Angle Valves D Angle Globe ME ME /4-4 Bolt Full Flow Double Flange Valve 1/4 FNPT Bolt Flange ME Bolt Full Flow Double Flange Valve 1/2 FNPT Bolt Flange Type B ME ME Bolt Full Flow Double Flange Valve 1/4 FNPT Type B A ME Bolt Full Flow Single Flange Valve 1/2 FNPT 2 FNPT 17.7 ME /4-4 Bolt Full Flow Single Flange Valve 1/4 FNPT 1-1/4 FNPT 14.0 ME Bolt Full Flow Single Flange Valve 1/4 FNPT 2 FNPT 17.7 Viton and Teflon are trademarks of DuPont Performance Elastomers. ME Double Flange Angle Valve The ME813, ME818, ME819 and ME823 Series Valves feature our new modular Excela-Flange 4 Bolt inlet/outlet design that can be easily adapted to both NTP thread or socket weld type A companion flanges (ME840 & ME841 Series) ranging from 1-1/4 to 2 in diameter making it universal to piping sizes within this range. This innovative system allows installers the ability to eliminate unnecessary connections as well as possible leak points by integrating a convenient 4 bolt flange union at the valve inlet/outlet connections. Side Ports All stainless steel internal components with rotating seat disc design and V-cup Teflon packing stem seals Double lead acme stem thread ensures quick and efficient operation Durable ductile iron valve body with zinc plating finish 1-1/4 and larger globe valves have 35 seat angle for maximum product flow 1-1/4 and larger globe valve designed ergonomically correct for bobtail transport and bulk plant applications Inlet Outlet Mating Flange Type Weight (lbs.) Angle Globe Rated for 400 WOG Operating temperature 40 to +212 Fahrenheit Up to 70% MORE FLOW than the nearest competitor 1/4 FNPT or 1/2 FNPT plugged accessory ports upstream and downstream of valve seat Standard Nitrile seat, optional Teflon or Viton seat No. of Flange Inlet Outlet Side Side Style Angle Globe (FNPT) Port T E-Z Turn Ports Bonnet Knob To order Teflon or Viton Seal add T for Teflon and V for Viton after the prefix part number, i.e. ME815T-10 or ME815V-10 Teflon is a trademark of DuPont Company and Viton is a trademark of DuPont Performance Elastomers. All stainless steel internal components with rotating seat disc design and V-cup Teflon packing stem seals Double stem seal design ensures leak free operation Double lead stem thread ensures quick and efficient operation Durable ductile iron valve body with automotive grade powder coat finish 1-1/4 and larger globe valves have 35 seat angle for maximum product flow 1-1/4 and larger globe valve designed 1-3/4, 2-1/4, and 3-1/4 Acme threads available on globe valves Rated for 400 WOG Operating temperature 40 to +212 F Push-To- Turn Locking Handwheel Kit Accessories Hydrostatic Relief Valves Vent Valves ME815-4 ME /2 1/2 FNPT 1/4 2 No ME815-6 ME /4 3/4 FNPT 1/4 2 No ME815-8 ME FNPT 1/4 2 No MEH225 MEJ400 ME ME /4 1-1/4 FNPT 1/4 2 Yes ME829 ME815-16LHK MEH225SS MEJ400SC ME /4 1-3/4 M. Acme 1/4 2 Yes ME829 ME815-16LHK MEH25/450 MEJ402S ME /4 2-1/4 M. Acme 1/4 2 Yes ME829 ME815-16LHK ME ME /2 1-1/2 FNPT 1/4 2 Yes ME829 ME815-16LHK ME ME FNPT 1/4 2 Yes ME829 ME815-16LHK ME FNPT 1/2 2 Yes ME829 ME815-16LHK MEH50/460 ME815-2F ME825-2F 2-300LB 2-300LB 1/4 2 Yes ME829 ME815-16LHK Flanged Flanged MEH225 MEJ400 ME ME FNPT 1/4 2 Yes Included MEH225SS MEH25/450 MEJ400SC MEJ402S ME815-3F 3-300LB Flanged 3-300LB Flanged 1/4 2 Yes Included ME825-6 Vent Valve Not Included ME825-6 with MEP449S-101 Replacement Protective Weather Boot D ME829 E-Z Turn Knob ME Double Flange Globe Valve ME Flange x NPT Globe Valve ME ME Patent Pending ME815-6 Vent Valve Not Included ME Patent Pending 89 90

49 GLOBE & ANGLE VALVES GLOBE & ANGLE VALVES High Flow Globe & Angle Valves - Excela-Flange 2 Bottom Port / Integrated Pilot Valves High Flow Globe & Angle Valves - Next Generation Excela-Flange Series 1/4 FNPT Side Port A 1/4 FNPT Side Port B Side Ports Inlet Outlet Mating Flange Type ME822P-16-4* Plugged Plugged Plugged 4 Bolt Flange Type B A 20.2 ME823P-16-4 Plugged Plugged Plugged 4 Bolt Flange Type B A 20.2 ME823P-16H-4 Plugged MEH225 Plugged 4 Bolt Flange Type B A Full Flow 4 Bolt ME823P-16HSS-4 Plugged MEH225SS Plugged 4 Bolt Flange Type B A Bolt Flange Flange ME818P-16-4* Plugged Plugged Plugged 2 FNPT A 18.2 (P) Valve Type B ME819P-16-4 Plugged Plugged Plugged 2 FNPT A 18.2 ME819P-16H-4 Plugged MEH225 Plugged 2 FNPT A 18.2 ME819P-16HSS-4 Plugged MEH225SS Plugged 2 FNPT A 18.2 Weight (lbs.) Angle Globe Side Ports Inlet Outlet Mating Weight (lbs.) Flange Type Angle Globe A ME813IBC-16 ME823IBC-16 2 Full Flow 4 Bolt Double Flange (IBC) Valve 1/4 FNPT 4 Bolt ME822IBC-16 2 Full Flow 4 Bolt Double Flange (IBC) Valve 1/2 FNPT A 19.7 Flange ME813P-16 ME823P-16 2 Full Flow 4 Bolt Double Flange (P) Valve 1/4 FNPT A Bolt Type B ME822P-16 2 Full Flow 4 Bolt Double Flange (P) Valve 1/2 FNPT A 20.1 Flange ME818IBC-16 2 Full Flow 4 Bolt Single Flange (IBC) Valve 1/2 FNPT A 18.2 Type B ME818P-16 2 Full Flow 4 Bolt Single Flange (P) Valve 1/2 FNPT A FNPT ME819IBC-16 2 Full Flow 4 Bolt Single Flange (IBC) Valve 1/4 FNPT A 18.1 ME819P-16 2 Full Flow 4 Bolt Single Flange (P) Valve 1/4 FNPT A 18.1 Excela-Flange 2 Bottom Port / Integrated Pilot Valves provide a positive shut-off valve that is highly reliable with full flow performance while providing bi-directional flow. Ideally suited for use on transport trailers with 1/2 blow down lines to provide rapid and complete product evacuation prior to disconnecting transfer hose. Valves can be purchased with hydrostatic relief valves pre-installed on the out board side port of the globe valve main seal. All of the same great features of the original full flow MEC globe valves with additional product performance enhancements. Pilot Feature (P): This globe valve model incorporates a pilot orifice feature to facilitate pressure equalization in sections of system piping that have bidirectional flow or high differential pressures. This greatly reduces the opening torque required and prevents premature wear of the valve seat. The Excela-Flange 2 Bottom Port Operated Flanged Globe Valves feature our new modular Excela-Flange 4 bolt inlet/outlet flange design that can be easily adapted to both NPT thread or socket weld Type A companion flanges (ME840 and ME841 Series) ranging from 1-1/4 to 2 in diameter making it universal to piping sizes within this range. This innovative system allows installers the ability to eliminate unnecessary connections as well as possible leak points by integrating a convenient 4 bolt flange union at the valve inlet/outlet connections. The Next Generation Flanged 2 Globe and Angle Valves feature our new modular Excela-Flange 4 Bolt inlet/outlet design that can be easily adapted to both NTP thread or socket weld type A companion flanges (ME840 and ME841 Series) ranging from 1-1/4 to 2 in diameter making it universal to piping sizes within this range. This innovative system allows installers the ability to eliminate unnecessary connections as well as possible leak points by integrating a convenient 4 bolt flange union at the valve inlet/outlet connections. All of the same great features of the original Full Flow MEC Globe Valves with additional product performance enhancements. Pilot Feature (P): This globe valve model incorporates a pilot orifi ce feature to facilitate pressure equalization in sections of system piping that have bidirectional flow or high differential pressures. This greatly reduces the opening torque required and prevents premature wear of the valve seat. Integrated Back Check Feature (IBC): These globe and angle valve models incorporate an integrated back check feature to allow trapped downstream pressure to automatically bypass to the upstream side of the valve. These valves are designed for systems with flow in one direction, creating a closed loop system that prevents the product from relieving to the atmosphere making for a low emission, more environmentally friendly option. ME819P Flange x NPT Globe Valve D D Pilot Feature Pilot Feature ME819P Flange x NPT Pilot Globe Valve ME823P Double Flange Pilot Globe Valve Integrated Back Check Feature Pilot Feature Port A 1/4 FNPT Port C 1/2 FNPT Port B 1/4 FNPT ME823IBC-16 ME823P

50 GLOBE & ANGLE VALVES GLOBE & ANGLE VALVES Next Generation High Flow Globe and Angle Valves High Flow Globe & Angle Valves - 2 Next Generation - 1/2 Bottom Port Integrated Back Check Angle Pilot Feature Integrated Back Check Globe Pilot Feature Inlet (FNPT) Outlet Side Port T No. of Side Ports Flange Style Bonnet E-Z Turn Knob Accessories Hydrostatic Relief Valves ME815IBC-16 ME815P-16 ME825IBC FNPT 1/4 2 Yes ME829 MEH225 ME828IBC /4 Male Acme 1/4 2 Yes ME829 MEH225S MEH25/450 Vent Valves MEJ400 MEJ400SC MEJ402S ME824IBC FNPT 1/2 2 Yes ME829 MEH50/460 Marshall Excelsior s Next Generation High Flow Globe and Angle Valves have the same great features of the original High Flow Marshall Excelsior globe and angle valves with additional product performance enhancements. These globe and angle valves provide a positive shutoff that is highly reliable with High Flow performance, bidirectional flow, or reduced product emissions. The Integrated Back Check Feature (IBC) is designed for use in sections of piping where the trapped liquid pressure may exceed 100 PSIG between two valves. When trapped liquid pressure exceeds 100 PSIG, the integrated back check feature automatically bypasses trapped downstream system pressure through the valve seat to the upstream side of the valve into the product container or piping. A closed looped system is created because the 100 PSIG is far below the PSIG set pressure of a hydrostatic relief valve keeping the product in the system and reducing product emissions. WARNING: NFPA 58 requires that a hydrostatic relief valve be installed into any section of piping that could allow liquid to become trapped between two shutoff valves. 1/4 FNPT Side Port A 1/4 FNPT Side Port B ME825P-16-4 Full Flow Valve with Integrated Pilot Feature Plugged Plugged ME825P-16H-4 Full Flow Valve with Integrated Pilot Feature Plugged MEH225 ME825P-16HSS-4 Full Flow Valve with Integrated Pilot Feature Plugged MEH225SS Next Generation 2 Bottom Port Globe Valves provide a positive shut-off valve that is highly reliable with full flow performance while providing bidirectional flow. Ideally suited for use on transport trailers with 1/2 blow down lines to provide rapid and complete product evacuation prior to disconnecting the transfer hose. Valves can be purchased with hydrostatic relief valves pre-installed in the side port of the globe valve downstream of the main seal. The valves include a pilot orifice feature to facilitate pressure equalization in sections of system piping that have bidirectional flow or high differential pressures, greatly reducing the opening torque required and preventing premature wear of the valve seat. These valves have all of the great features of the original full flow MEC Globe Valves with additional product performance enhancements. Pilot Feature (P): These globe valve models incorporate a pilot orifice feature to facilitate pressure equalization in sections of system piping that have bidirectional flow or high differential pressures. This greatly reduces the opening torque required and prevents premature wear of the valve seat. Pilot Feature 1/2 FNPT Bottom Port Inlet/ Outlet Accessories E-Z Turn Knob Plugged 2 FNPT ME829 D The Integrated Pilot Feature (P) is designed for sections of piping that have bidirectional flow. Standard globe and angle valves installed in bidirectional systems can have a potential for back pressure to build-up on the upstream side of a closed valve. This pressure adds to the force required to open the valve causing additional wear to the valve stem and seat material. The integrated pilot feature allows the first portion of stem travel to unseat the pilot orifice, automatically equalizing the system pressure prior to unseating the valve holder seal. This greatly reduces the opening torque required in bidirectional systems and prevents premature wear of the primary valve seat material and valve components. ME825P-16HSS-4 Port B 1/4 FNPT Port C 1/2 FNPT Port C 1/4 FNPT D Globe and Angle Valves Push-to-Turn Locking Handwheel Kit ME815-16LHK s Push-To-Turn Locking Handwheel Kit for all 1-1/4, 1-1/2 and 2 MEC Angle / Globe Valves Integrated Back Check Feature (IBC) Integrated Pilot Feature (P) Marshall Excelsior s Push-to-Turn Locking Handwheel Kit helps prevent accidental opening of any 1-1/4, 1-1/2, or 2 MEC angle or globe valve configuration. Once installed the kit requires the operator to push down on the hand wheel to engage the valve stem in order to open or fully close the valve making it a deliberate action to actuate. The ejection spring disengages the handwheel from the stem when released, preventing unintentional opening of the valve. ME825IBC-16 U.S. and Canada Patented Up to70% More Flow ME825P-16 U.S. and Canada Patented Up to70% More Flow 93 94

51 GLOBE & ANGLE VALVES Y-STRAINERS Flanged Full Port Globe Valves Y-Strainers Side Ports No. of Side Ports Inlet Outlet ME825-3F Full Port Globe Valve with Integrated Pilot Feature 1/4 FNPT LB LB ME825-4F Full Port Globe Valve with Integrated Pilot Feature 1/4 FNPT LB LB ME825-3F ME829 ME980SK-24 ME904S-3F-027 ME904S-4F-027 Accessory s Black Handwheel E-Z Turn Knob Kit 3 & lb. ESV & Globe Valve Flange Stud Kit lb. Spiral Ring Flange Gasket-Carbon Steel lb. Spiral Ring Flange Gasket-Carbon Steel Full Port Flanged Globe Valves provide all the servicability features of a traditional globe valve with the full port flow capacity of a ball valve. Flanged end connections facilitate easy servicing along with a replaceable valve seat providing long service life for your investment. The valve also features an integrated pilot feature allowing pressure equalizing across the valve seat for bi-directional system flow. Pilot Feature (P): These globe valve models incorporate a pilot orifice feature to facilitate pressure equalization in sections of system piping that have bidirectional flow or high differential pressures. This greatly reduces the opening torque required and prevents premature wear of the valve seat. Has same great reliable and durable teflon stem packing glands as our other globe valves Features exclusive slip cam construction for full port flow rates Removable bonded main seat disc assembly All stainless steel internal component construction for maximum corrosion resistance Same overall length as ANSI ball valve Blow-Off Inlet & Outlet 20 Mesh Screen 40 Mesh Screen 80 Mesh Screen Plug Size FNPT ME650S/20 ME650S ME650S/80 1/2 1/2 ME651S/20 ME651S ME651S/80 1/2 3/4 ME652S/20 ME652S ME652S/80 3/4 1 ME653S/20 ME653S ME653S/80 3/4 1-1/4 ME654S 1 1-1/2 ME655S/20 ME655S ME655S/ ME655S-2F LB Flange ME656S ME656S/80 1-1/4 3 ME656S-3F 1-1/ LB Flange ME656S-4F 1-1/ LB Flange * To add a factory installed plug use a P after the prefix number i.e. ME650SP/20 Y-Strainers are designed for flow in one direction to guard against debris in pipelines that could cause damage to pumps, valves or other equipment. They can be installed horizontally or vertically and are available in three stainless steel mesh sizes. The mesh size equals the number of holes per square inch (i.e. the smaller the number the larger the holes). A shutoff valve installed on the filter basket outlet allows for convenient blow-off cleaning of Y-Strainer while under pressure. The ME656S Series Ductile Iron Strainers are available in 3 or lb ANSI flange sizes with threaded blow-off ports. All strainers come standard with 40 mesh stainless steel reinforced screens for maximum durability and protection of downstream equipment. Plugs for the threaded blow-offs are available at additional cost.* Durable ductile iron body with automotive grade powder coat finish Rated 600 PSI / WOG Optional factory installed plug* Designed for LP-Gas or NH 3 ME653S ME653SP D ME655S D ME656S ME656S-3F-901 ME656S-3F Replacement Screen ME656S-3F 95 96

52 BALL VALVES BALL VALVES Ball Valves JOMAR Carbon Steel Gas Ball Valve T-CS-1001N-SS JOMAR T-204DU FIP X FIP Input Output Type Side Tap T-204DU FIP X FIP 1/2 FNPT* 1/2 FNPT T-204DU FIP X FL 1/2 FNPT 1/2 Flare Dielectric T-203DU FIP X FIP 1/2 FNPT* 1/2 FNPT 1/8 T-203DU FIP X FL 1/2 FNPT 1/2 Flare T-204 FIP X FIP 1/4 FNPT* 1/4 FNPT Threaded T-203 FIP X FIP 3/8 FNPT* 3/8 FNPT* 1/8 T-204 FL X FL 3/8 Flare* 3/8 Flare T-204 FL X FIP 3/8 Flare* 1/2 FNPT Flare T-203 FL X FL 3/8 Flare* 3/8 Flare 1/8 T-203 FL X FIP 1/2 Flare 1/2 FNPT Size / / / /4 Size / / The T-CS-1001N-SS is a 1/4 turn, latch-lock, lever handle operated, two-piece body designed, gas ball valve. This valve has a WCB carbon steel body with stainless steel ball and stem. It is 100% full port with a blow-out proof stem. T-CS-1001N-SS *Size listed is the smallest size in the series. Larger sizes are available. More gas valves are available upon request. Speak to your MTankCo representative for more information. Carbon Steel Gas Ball Valve S-CS-1000N-SS-4B JOMAR T-203 FL X FL Ideal for use outside in extremely cold climates 2 Viton O-rings 100% leak tested Made in Italy Leakproof stem - LIFETIME WARRANTY Size / / Size / / S-CS-1000N-SS-4B Carbon Steel Gas Ball Valve FL-CS JOMAR S-CS-1000N-SS-4B is a 1/4 turn, latch lock, lever handle operated gas ball valve. This valve has a three-piece WCB carbon steel body with four-bolt (swing-out pattern). It is 100% full port, with a stainless steel solid ball and blow-out proof 316 stainless steel stem. FL-CS Size Carbon Steel Gas Ball Valve T-CS-2002N-SS-DUE Size The FL-CS is a full port, API 607 fire safe certified, NACE MR0175 approved 1/4 turn flanged ball valve. It has a WCB carbon steel body, stainless steel ball and stem, RPTFE seats, blow-out proof stem, and actuator mounting pads. JOMAR Stainless Steel Flanged Gas Ball Valve FL-SS Size Size JOMAR The FL-SS is a 100% full port, API 607 fire safe certified, NACE MR0175 approved, 1/4 turn flanged ball valve. It has a stainless steel body, ball and stem, RPTFE seats, blow-out proof stem, and actuator mounting pads. FL-SS E T-CS-2002N-SS-DUE Size / / / /4 Size / / The T-CS-2002N-SS-DUE is a 1/4 turn, lever handle operated, WCB carbon steel body with stainless steel ball and stem. It has a five-piece, double-union end body design, is 100% full port, with a blow-out proof stem. Stainless Steel Gas Ball Valve T-SS-2002N-DUE Size / / / /4 Size / / JOMAR The T-SS-2002N-DUE is a double union ball valve that is UL approved for flammable liquids including liquid propane, LP gas, anhydrous ammonia, natural and manufactured gas. These valves are designed for industrial applications of steam, water, oil, gas, and corrosive materials. T-SS-2002N-DUE E 97 98

53 BALL VALVES BALL VALVES Stainless Steel Gas Ball Valve T-SS-1000N-4B JOMAR Brass Threaded Gas Ball Valve T-100NE JOMAR T-SS-1000N-4B Size / / / / Size / / The T-SS-1000N-4B is a quarter turn, lever handle operated, stainless steel gas ball valve. Its latch lock handle can be locked in open or closed positions. It has a three-piece body design, four-bolt (swing-out pattern), full port, stainless steel solid ball, and blow-out proof stainless steel stem. Size / / / / /4 Brass Gas Ball Valve T-100FMN Size / / JOMAR T-100NE T-SS-1000N-4B-VB Stainless Steel Gas Vented Ball Valve T-SS-1000N-4B-VB Size VB 1/ VB 3/ VB 1/ VB 3/ VB 1 Size VB 1-1/ VB 1-1/ VB VB VB 4 JOMAR The T-SS-1000N-4B-VB is a quarter turn, lever handle operated, stainless steel body, three-piece, four-bolt (swing-out pattern), full port, with threaded connection. This valve has a stainless steel vented solid ball, with blow-out proof stainless steel stem. The latch lock handle can be locked in open or closed positions. Size / / /2 Size / / Brass Threaded Gas Ball Valve T-100S TN with Side Tap Size / Size / / JOMAR T-100NE Stainless Steel Gas Ball Valve T-SS-1001N JOMAR S-100FMN E T-SS-1001N T-SS-1001N-VB Size / / / /4 Size VB 1/ VB 3/ VB 1/ VB 3/4 Size / / The T-SS-1001N is a two-piece, stainless steel body design with threaded connection. It has a quarter turn, latch-lock, and is lever handle operated. Its ball and stem are stainless steel, has a 100% full port, and blow-out proof stem. Stainless Steel Gas Ball Valve T-SS-1001N-VB Size VB VB 1-1/ VB 1-1/ VB 2 JOMAR Brass Gas Ball Valve T-82 Mini Input /4 FIP x 1/4 MIP (Screwdriver Slot Handle) /4 FIP x 1/8 MIP (Screwdriver Slot Handle) /8 FIP x 1/8 MIP /4 FIP x 1/8 MIP /4 FIP x 1/4 MIP /4 FIP x 1/4 FIP Bronze Substitute Gas Ball Valve T-100NEG Size NGDZ 1/ NGDZ 3/ NGDZ 1 Size NGDZ 1-1/ NGDZ 1-1/ NGDZ 2 JOMAR JOMAR T-82 Mini E The T-SS-1001N-VB is a quarter turn, latch-lock, lever handle operated, two-piece stainless steel gas ball valve with a stainless steel vented ball. It has a 100% full port with a stainless steel blow-out proof stem. T-100NEG

54 BALL VALVES HOSE ASSEMBLIES Blue Top Gas Ball Valves T-3000 LEGEND Hose Assemblies T-3000 T-3 1/2 FL X FL Size / /2 Size /4 The T-3000 is one-piece, heavy duty forged brass valve designed as a gas appliance connector for use with natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures. Blue Top Gas Ball Valves T-3100 Input Output Type Side Tap T-3 1/2 FP X FP 1/2 FNPT 1/2 FNPT T-3 3/4 FP 3/4 FNPT 3/4 FNPT FNPT X FNPT 1/8 T-3 1 FP X FP 1 FNPT 1 FNPT T-3 3/8 FL X 1/2 FIP 3/8 FL 1/2 FIP T-3 1/2 FL X 1/2 FIP 1/2 FL 1/2 FIP T-3 1/2 FL X 3/4 FIP 1/2 FL 3/4 FIP T-3 5/8 (16) FL X 1/2 FIP 5/8 (15/16-16) FL 1/2 FIP Flare X FIP T-3 5/8 (14) FL X 3/4 FIP 5/8 (7/8-14) FL 3/4 FIP T-3 5/8 (16) FL X 3/4 FIP 5/8 (15/16-16) FL 3/4 FIP T-3 3/8 (24) FL X 1/2 FIP 3/8 (9/16-24) FL 1/2 FIP T-3 3/8 FL X 1/2 MP 3/8 FL 1/2 MP T-3 1/2 FL X 1/2 MP 1/2 FL 1/2 MP Flare X MIP T-3 3/8 FL X 3/8 FL 3/8 FL 3/8 FL T-3 1/2 FL X 1/2 FL 1/2 FL 1/2 FL Flare X Flare T-3 5/8 FL X 5/8 FL 5/8 FL 5/8 FL LEGEND Size SLP 1/4 2 2 ft. SLP 1/4 3 3 ft. SLP 1/4 4 4 ft. SLP 1/4 5 5 ft. SLP 1/4 6 6 ft. 1/4 Hose Assembly, 3/8 FL EL SLP 1/4 8 8 ft. SLP 1/ ft. SLP 1/ ft. SLP 1/ ft. SLP 3/8 6 6 ft. SLP 3/ ft. SLP 3/ ft. 3/8 Hose Assembly, 3/8 FL EE SLP 3/ ft. SLP 3/ ft. 3/8 Hose Assembly 1/4 Hose Assembly T-3 1/2 FL X FIP The T-3100 Series is one-piece, heavy duty forged brass valve designed as a gas appliance connector. This valve is for use with natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures. E T-3100 FL X FL E

55 FITTINGS FITTINGS Pipe Fittings Couplings, Hex Head Plugs, Caps, and Unions Product Material Galvanized Black Iron Forged Steel (Extra Heavy) Ordering Abbreviation GAL BLK FS ORDERING NOTE: Symbols on the Product Chart to the left denote the materials in which fittings are available. When ordering, add the corresponding prefix to the Item Number to indicate the product material. For example, when ordering a Black Iron, 1/4, 45º Elbow, FIP X FIP order number will be BLK 1/4 45 EL. 1/4 3/8 1/2 3/ /2 Couplings 1/4 CO 3/8 CO 1/2 CO 3/4 CO 1 CO 1-1/2 CO Hex Plugs 1/4 PLUG 3/8 PLUG 1/2 PLUG 3/4 PLUG 1 PLUG 1-1/2 PLUG Caps 1/4 CAP 3/8 CAP 1/2 CAP 3/4 CAP 1 CAP 1-1/2 CAP Unions 1/4 UNION 3/8 UNION 1/2 UNION 3/4 UNION 1 UNION 1-1/2 UNION Contact your MTankCo representative if you are unable to find the part or parts you are looking for. F 1/8 1/4 3/8 1/2 90 Elbow, FIP X FIP 1/8 90 EL 1/4 90 EL 3/8 90 EL 1/2 90 EL 90º Street Elbow, FIP X MIP 1/8 ST EL 1/4 ST EL 3/8 ST EL 1/2 ST EL 45º Elbow, FIP X FIP 1/8 45 EL 1/4 45 EL 3/8 45 EL 1/2 45 EL 45º Street Elbow, FIP X MIP 1/8 45 ST EL 1/4 45 ST EL 3/8 45 ST EL 1/2 45 ST EL 90º Elbow, Side Outlet, FIP X FIP X FIP 1/8 90 EL SO 1/4 90 EL SO 3/8 90 EL SO 1/2 90 EL SO Tee - Straight, FIP X FIP X FIP 1/8 TEE 1/4 TEE 3/8 TEE 1/2 TEE Service Tee, MIP X FIP X FIP 1/8 SRV TEE 1/4 SRV TEE 3/8 SRV TEE 1/2 SRV TEE Tee, Side Outlet FIP X FIP X FIP X FIP 1/8 SO TEE 1/4 SO TEE 3/8 SO TEE 1/2 SO TEE Cross, FIP X FIP X FIP X FIP 1/8 CRS 1/4 CRS 3/8 CRS 1/2 CRS 3/ /4 1-1/2 90 Elbow, FIP X FIP 3/4 90 EL 1 90 EL 1-1/4 90 EL 1-1/2 90 EL 90º Street Elbow, FIP X MIP 3/4 ST EL 1 ST EL 1-1/4 ST EL 1-1/2 ST EL 45º Elbow, FIP X FIP 3/4 45 EL 1 45 EL 1-1/4 45 EL 1-1/2 45 EL 45º Street Elbow, FIP X MIP 3/4 45 ST EL 1 45 ST EL 1-1/4 45 ST EL 1-1/2 45 ST EL 90º Elbow, Side Outlet, FIP X FIP X FIP 3/4 90 EL SO 1 90 EL SO 1-1/4 90 EL SO 1-1/2 90 EL SO Tee - Straight, FIP X FIP X FIP 3/4 TEE 1 TEE 1-1/4 TEE 1-1/2 TEE Service Tee, MIP X FIP X FIP 3/4 SRV TEE 1 SRV TEE 1-1/4 SRV TEE 1-1/2 SRV TEE Tee, Side Outlet FIP X FIP X FIP X FIP 3/4 SO TEE 1 SO TEE 1-1/4 SO TEE 1-1/2 SO TEE Cross, FIP X FIP X FIP X FIP 3/4 CRS 1 CRS 1-1/4 CRS 1-1/2 CRS 2 2-1/ Elbow, FIP X FIP 2 90 EL 2-1/2 90 EL 3 90 EL 4 90 EL 90º Street Elbow, FIP X MIP 2 ST EL 2-1/2 ST EL 3 ST EL 4 ST EL 45º Elbow, FIP X FIP 2 45 EL 2-1/2 45 EL 3 45 EL 4 45 EL 45º Street Elbow, FIP X MIP 2 45 ST EL 2-1/2 45 ST EL 3 45 ST EL 4 45 ST EL 90º Elbow, Side Outlet, FIP X FIP X FIP 2 90 EL SO 2-1/2 90 EL SO 3 90 EL SO 4 90 EL SO Tee - Straight, FIP X FIP X FIP 2 TEE 2-1/2 TEE 3 TEE 4 TEE Service Tee, MIP X FIP X FIP 2 SRV TEE 2-1/2 SRV TEE 3 SRV TEE 4 SRV TEE Tee, Side Outlet FIP X FIP X FIP X FIP 2 SO TEE 2-1/2 SO TEE 3 SO TEE 4 SO TEE Cross, FIP X FIP X FIP X FIP 2 CRS 2-1/2 CRS 3 CRS 4 CRS Street Elbow 90º Elbow Tee Cross Bushings, Threaded Pipe, Street Elbow, and Tee Fittings Galvanized Nipple 1/4 3/8 1/2 1 Bushing - 3/8 3/8 x 1/4 BU 3/8 x 3/8 BU 3/8 x 1/2 BU 3/8 x 1 BU Bushing - 1/2 1/2 x 1/4 BU 1/2 x 3/8 BU 1/2 x 1/2 BU 1/2 x 1 BU Bushing - 3/4 3/4 x 1/4 BU 3/4 x 3/8 BU 3/4 x 1/2 BU 3/4 x 1 BU Threaded Pipe 18 Long 18 x 1/4 THRD Pipe 18 x 3/8 THRD Pipe 18 x 1/2 THRD Pipe 18 x 1 THRD Pipe Threaded Pipe 24 Long 24 x 1/4 THRD Pipe 24 x 3/8 THRD Pipe 24 x 1/2 THRD Pipe 24 x 1 THRD Pipe Threaded Pipe St. Elbow 1/4 ST EL 3/8 ST EL 1/2 ST EL 1 ST EL Tee 1/4 TEE 3/8 TEE 1/2 TEE 1TEE Nipples Coupling Plug Nipple 1/4 3/8 1/2 3/4 1 Close 1/4 CL 3/8 CL 1/2 CL 3/4 x CL 1 x CL 1-1/2 Long 1/4 x 1-1/2 3/8 x 1-1/2 1/2 x 1-1/2 3/4 x 1-1/2 1 x 1-1/2 2 Long 1/4 x 2 3/8 x 2 1/2 x 2 3/4 x 2 1 x 2 2-1/2 Long 1/4 x 2-1/2 3/8 x 2-1/2 1/2 x 2-1/2 3/4 x 2-1/2 1 x 2-1/2 3 Long 1/4 x 3 3/8 x 3 1/2 x 3 3/4 x 3 1 x 3 3-1/2 Long 1/4 x 3-1/2 3/8 x 3-1/2 1/2 x 3-1/2 3/4 x 3-1/2 1 x 3-1/2 4 Long 1/4 x 4 3/8 x 4 1/2 x 4 3/4 x 4 1 x 4 4-1/2 Long 1/4 x 4-1/2 3/8 x 4-1/2 1/2 x 4-1/2 3/4 x 4-1/2 1 x 4-1/2 5 Long 1/4 x 5 3/8 x 5 1/2 x 5 3/4 x 5 1 x 5 6 Long 1/4 x 6 3/8 x 6 1/2 x 6 3/4 x 6 1 x 6 7 Long 1/4 x 7 3/8 x 7 1/2 x 7 3/4 x 7 1 x 7 8 Long 1/4 x 8 3/8 x 8 1/2 x 8 3/4 x 8 1 x 8 9 Long 1/4 x 9 3/8 x 9 1/2 x 9 3/4 x 9 1 x 9 10 Long 1/4 x 10 3/8 x 10 1/2 x 10 3/4 x 10 1 x Long 1/4 x 11 3/8 x 11 1/2 x 11 3/4 x 11 1 x Long 1/4 x 12 3/8 x 12 1/2 x 12 3/4 x 12 1 x Long 1/4 x 18 3/8 x 18 1/2 x 18 3/4 x 18 1 x Long 1/4 x 24 3/8 x 24 1/2 x 24 3/4 x 24 1 x Long 1/4 x 30 3/8 x 30 1/2 x 30 3/4 x 30 1 x 30 Cap Union F

56 SIGHT FLOW SWING CHECK VALVES SIGHT FLOW SWING CHECK VALVES ME875S-16 Sight Flow Swing Check Valves Inlet and Outlet FNPT Seal Material OAL ME875S-16 2 Nitrile 5-3/4 ME875SN-16 2 Neoprene 5-3/4 ME875SV-16 2 Viton 5-3/4 ME875S-24 3 Nitrile 7-3/8 ME875SN-24 3 Neoprene 7-3/8 ME875SV-24 3 Viton 7-3/8 ME875S-3F* 3-300LB Flange Nitrile 10-1/2 * NC indicates no check e.i. ME875SNC-16 Viton is a trademark of DuPont Performance Elastomers * Not a UL Listed Configuration Marshall Excelsior s Sight Flow Swing Check Valves are designed with the most durable, impact resistant glass in the industry. This sight flow valve allows bulk plant operators an inspection point to visually monitor liquid flow conditions which allows the operator to achieve maximum pump efficiency. They also feature a soft seat swing away check valve which limits flow to one direction. This check valve is usually closed until pressure activates the valve when flow is directed into piping or containers causing the valve to open. When flow stops or reverses, the check returns to the closed position minimizing product loss in the event of a line failure. Installing a sight flow valve upstream of a plant pump, allows the operator to observe product flow and make pump adjustments for maximum flow without the liquid forming vapor bubbles causing uneven flow patterns and significantly reducing efficiency. Additionally, installing a sight flow valve at the loading arm of a plant allows the operator to maintain consistent observation of pump conditions. This valve is suitable for stationary and mobile applications. Installing this valve on a compressor operation will provide a visual indication of when the tank car or transport is emptied of liquid and ready for vapor recovery. 4 bolt universal inlet/outlet flanges Specially formulated, large diameter, impact resistant sight glass with O-ring packing seals for maximum safety and visibility Durable ductile iron body with cadmium plated finish for maximum durability Integral swing check valve with soft seat for maximum product flow - minimizing product loss in the event of a line failure All stainless steel internal components for maximum corrosion resistance Standard nitrile seat, available in Viton or Kalrez Listed for use with LP Gas and NH3-400 PSI/ WOG For use with all Type A (ME840 and ME841 Series) companion flanges ME875S-3F Installing a sight flow valve upstream of a plant pump, allows the operator to observe product flow and make pump adjustments for maximum flow without the liquid forming vapor bubbles causing uneven flow patterns and significantly reducing efficiency. Additionally, installing a sight flow valve at the loading arm of a plant allows the operator to maintain consistent observation of pump conditions. This valve is suitable for stationary and mobile applications. Installing this valve on a compressor operation will provide a visual indication of when the tank car or transport is emptied of liquid and ready for vapor recovery. Specially formulated, large diameter impact resistant sight glass with O-ring packing seals for maximum safety and visibility Durable ductile iron body with cadmium plated finish All steel and stainless steel construction Rated up to 400 PSI/ WOG Hexagon cast ends for ease of installation 1-1/4-4 Flow Indicating Swing Check Valves Material Flange Material OAL ME /4 FNPT Flow Indicating Check Valve 4-3/4 ME FNPT Flow Indicating Check Valve Ductile Iron 4-3/4 ME /4 FNPT Flow Indicating Check Valve 5-3/8 ME FNPT Flow Indicating Check Valve Cast Steel 6-7/8 ME FNPT Flow Indicating Check Valve Ductile Iron 9-5/8 ME /4 FNPT Non-Indicating Check Valve Ductile Iron 5-3/8 ME FNPT Non-Indicating Check Valve Ductile Cast Steel 6-7/8 ME FNPT Non-Indicating Check Valve Iron 9-5/8 ME F lb. Flange Flow Indicating Check Valve 11-7/8 ME F lb. Flange Flow Indicating Check Valve 14-1/8 Ductile ME F lb. Flange Flow Indicating Check Valve 14-1/4 Iron ME F lb. Flange Flow Non-Indicating Check Valve 11-7/8 ME F lb. Flange Flow Non-Indicating Check Valve 14-1/8 ME F lb. Flange Flow Non-Indicating Check Valve 14-1/4 ME Indicating Check Valve ME F ME874S-16 Sight Flow Swing Check Valves Excela-Flange Series Inlet Outlet ME874S Bolt Double Flange Sight Flow Valve 4 Bolt Flange Type B 4 Bolt Flange Type B Mating Flange Type Weight (lbs.) A 16.0 * NC indicates no check e.i. ME874SNC-16 Viton is a trademark of DuPont Performance Elastomers The ME874S-16 Sight Flow Swing Check Valves feature our new modular Excela-Flange 4-Bolt Inlet/Outlet design that can be easily adapted to both NPT thread or socket weld type A companion flanges (ME840 & ME841 Series) from 1-1/4-2 in diameter making it universal to piping sizes within this range. MEC Sight flow valves are designed with the most durable, impact resistant glass in the industry. This sight flow valve allows bulk plant operators an inspection point to visually monitor liquid flow conditions which allows the operator to achieve maximum pump efficiency. They also features a soft seat swing away check valve which limits flow to one direction. This check valve is usually closed until pressure activates the valve when flow is directed into piping or containers causing the valve to open. When flow stops or reverses, the check returns to the closed position minimizing product loss in the event of a line failure. Flow Indicating Swing Check Valves promotes maximum pump efficiency by providing system operators with a visual inspection point for monitoring liquid flow conditions as well as providing a soft seat back check valve to prevent reverse product flow. Installation of a flow indicating swing check valve upstream of the pump allows the operator to observe product flow and make pump adjustments for maximum flow without cavitation. Suitable for stationary and mobile applications. Powder coated ductile iron body for maximum durability Removable flanged ends for easy field service Integral swing away check valve with soft seat to promote maximum product flow and prevent reverse product flow All stainless steel, corrosion resistant internal component construction Magnetically coupled flow indicator for maximum protection against leaks and minimal resistance to product flow Easy to read flow indicator with Glow arrow shows if valve is open/closed UL Listed for use with LP Gas and Anhydrous Ammonia PSI WOG ME981-6 ME F F

57 GAUGES & ACCESSORIES ACCU-MAX Lift Truck Float LPG Gauge Float for Gauges Dot Horizontal - FG3981 Series or Vertical Tank Orientation GAUGES & ACCESSORIES ACCU-MAX 1 NPT Above LPG Ground Float Float Gauges Gauges - FG3981 for ASME Series Horizontal Domestic Tanks & Dot Cylinders MES-FG U MES-FG U MES-FG U MES MES Propane Capacity and Mounting Style Nominal Cyli nder Diameter 33-1/2 lb. Universal 12 Replacement Parts Gauge Head Style Junior Brass Head Threaded 3/4 NPT Brass Head Threaded 1-1/4 NPT Brass Head Universal ASME / DOT Lift Truck Float Gauge Dial Screw Junior Float Gauge Head Gasket 1-1/4 NPT or junior head mounting Junior mounting head includes gasket Solid brass mounting head - LPG SERVICE ONLY Ultra low friction, smooth acting, non-jamming gear design Replacement Dial w/ 2 Mounting Screws MES KIT Hermetically sealed, easy to read dial Teflon coated, free-floating shaft Solid float; no metal shell to corrode or leak ACCU-MAX LPG Float Gauges are for above ground, horizontal tanks and DOT Cylinders with 1 NPT mounting. Refer to ordering information for correct size gauge. Remote ready Container Capacity (Gallons of Water) Solid brass mounting head - LPG SERVICE ONLY Ultra low friction, smooth acting, non-jamming gear design Nominal Cylinder Diameter MES-FG R MES-FG R MES-FG R MES-FG R MES-FG R* 420# Vertical 30 Gauge Style Head Threaded 1 NPT Brass Head Hermetically sealed, easy to read dial Teflon coated, free-floating shaft Solid float; no metal shell to corrode or leak Remote Ready Replacement Dial with 2 Mounting Screws MES R-KIT MES R-KIT (% of total volume) Standard Replacement Dial with 2 Mounting Screws MES KIT MES KIT (% of total volume) MES-FG U Lift Truck Float Gauge (Junior Head Mounting) MES-FG U Lift Truck Float Gauge (1-1/4 NPT Mounting) Gauge Face MES-FG3981 Series 1 NPT AG Float Gauges F F

58 GAUGES & ACCESSORIES GAUGES & ACCESSORIES ACCU-MAX LPG Float Gauges - for FG3981 Above Series Ground Horizontal Domestic Tanks ACCU-MAX LPG Float Float Gauges Gauges for ASME - FG3981 Above Series Ground Horizontal Domestic Tanks Container Capacity (Gallons of Water) ACCU-MAX Remote Ready Float Gauges are for above ground, domestic, horizontal tanks with 1-1/4 NPT mounting. Please refer to ordering information for correct size gauge. Nominal Cylinder Diameter MES-FG R MES-FG R MES-FG R MES-FG R Gauge Style Head Threaded 1-1/4 NPT Brass Head Solid brass mounting head - LPG SERVICE ONLY Ultra low friction, smooth acting, non-jamming gear design Remote Ready Replacement Dial with 2 Mounting Screws MES R-KIT Standard Replacement Dial with 2 Mounting Screws MES KIT Hermetically sealed, easy to read dial Teflon coated, free-floating shaft Solid float; no metal shell to corrode or leak Container Capacity (Gallons of Water) Nominal Cylinder Diameter MES-FG R MES-FG R MES-FG R MES-FG R MES-FG R MES-FG R Brass junior head mounting Solid brass mounting head - LPG SERVICE ONLY Ultra low friction, smooth acting, non-jamming gear design Hermetically sealed, easy to read dial Teflon coated, free-floating shaft Remote Ready Replacement Dial with 2 Mounting Screws MES R-KIT Solid float; no metal shell to corrode or leak Standard with remote ready dial Gasket included Remote ready Standard Replacement Dial with 2 Mounting Screws MES KIT FG2281 Series FG2281 Series F F

59 GAUGES & ACCESSORIES GAUGES & ACCESSORIES ACCU-MAX Junior Underground LPG Float Float Gauges Gauges - FG3981 for Underground Series Horizontal Domestic Tanks Accu-Max Float Gauges MES-FG R Container Capacity (Gallons of Water) Nominal Cylinder Diameter 24 MES-FG R MES-FG R MES-FG R MES-FG R MES-FG R MES-FG R MES MES Gauge Head Style Junior Brass Head Gauge Riser Lengths 8-1/2 15-1/2 Brass junior head mounting Solid brass mounting head - LPG SERVICE ONLY Ultra low friction, smooth acting, non-jamming gear design Remote Ready Replacement Dial with 2 Mounting Screws MES R-KIT Replacement Parts Universal ASME / DOT Lift Truck Float Gauge Dial Screw Junior Float Gauge Head Gasket Standard Replacement Dial with 2 Mounting Screws MES KIT Hermetically sealed, easy to read dial Teflon coated, free-floating shaft Solid float; no metal shell to corrode or leak Gasket included Type Style Dial Face Dial Size Tank Diameter ME Standard Glow/Black 72 ME Standard Glow/Black 79 ME Standard Glow/Black 84 DOT 4 ME930C-72 Classic Silver/Black 72 ME930C-79 Classic Silver/Black 79 ME930C-84 Classic Silver/Black 84 ME Standard Glow/Black 108 ME Standard Glow/Black 130 ASME 8 ME940C-108 Classic Silver/Black 108 ME940C-130 Classic Silver/Black 130 Accu-Max Limited Warranty: Marshall Excelsior warrants Accu-Max float gauges and repair kits to the original buyer to be free of defects in material and workmanship under normal service and use for two years from manufactured date. Accu-Max Float Gauges are designed to measure liquid levels within horizontal DOT and Stationary ASME Tanks with fluid capacities above 2,300 gallons. For maximum gauge life, the float arm features an integral spring-loaded shock absorber for harsh over-the-road applications. The standard dial face features a black background for reduced glare with glow technology providing an easy to read glow in the dark dial face, perfect for low light situations. An optional classical style dial face is available. These gauges are suitable for use in bobtail, transport, railcar and bulk storage applications. NOTE: Gauges must be installed on the centerline of the tank s side or end for accurate readings. All stainless steel construction Welded tube to coupling design for maximum strength and durability Dial face 100% sealed and argon filled to prevent moisture build-up and fogging Factory set and precision tuned for superb accuracy Dial face and mounting hardware universal with other industry standard gauges Mounts to all standard 8 bolt tank flange adapters Custom length tank configurations available upon request for 30 to 300 I.D. tank ME Glow Technology Standard Dial ME940 ASME Series 8 Dial Shown as Standard Glow Dial ME930 DOT Series Classic Dial MES-FG1281 Series Junior UG Float Gauges Float Gauge Accessories Connection Connection ME /2 MNPT 1/2-13 Female ME932 Weld 1/2-13 Female * Alternate spring ranges available. These Float Gauge Accessories are designed for mounting float gauges in DOT or ASME tanks. These zinc plated steel 8 bolt mounting flanges feature 1/2-13 threads for easy installation. ME931 F F

60 GAUGES & ACCESSORIES GAUGES & ACCESSORIES Accu-Max TM Float Gauges Top Mount Series Trans-Max DOT & ASME Stationary Float Gauges ME940TM ASME Series 8 Dial Dial Dial Tank Riser Face Size Diameter ME930TM ME930TM ME930TM Accu-Max ME930TM Glow/ Stationary ASME ME940TM Black Top Mount Gauge ME940TM ME940TM ME940TM Custom configurations available upon request. Accessories ME /2 MNPT Flange Adapter ME932 Weld Type Flange Adapter Dial Face Tank Diameter ME930WG ME930WG-79 DOT Float Gauge Assembly Glow/Black 79 ME930WG ME930CWG ME930CWG-79 DOT Float Gauge Assembly (Classic) Silver/Black 79 ME930CWG ME940WG Stationary Float Gauge Assembly Glow/Black ME940WG ME940CWG Stationary Float Gauge Assembly (Classic) Silver/Black ME940CWG ME930WG DOT Series ME940WG ASME Series ME930TM ASME Series 4 Dial Accu-Max Float Gauges Top Mount Series measure liquid levels within horizontal Stationary ASME Tanks with fluid capacities above 2,300 gallons. Suitable for use in bulk storage vessels equipped with either 2-1/2 NPT 6000 lb. or 8 bolt 3-1/2 on center tank openings located on the top of the vessel such as underground or buried applications. All stainless steel construction for use with LPG and NH 3 applications Welded tube to coupling design for maximum strength and durability Integral spring-loaded shock absorber for arduous over-the-road application Exclusive easy to read glow in the dark dial face perfect for low light situations Dial face 100% sealed and argon filled to prevent moisture build-up and fogging Easy to assemble Factory set and precision tuned for superb accuracy Dial face and mounting hardware universal with other industry standard gauges Mounts to all standard 8 bolt tank flange adapters Custom configurations available upon request Accu-Max Limited Warranty: Marshall Excelsior warrants Accu-Max float gauges and repair kits to the original buyer to be free of defects in material and workmanship under normal service and use for two years from manufactured date. Accu-Max Float Gauges Trans-Max Series measure liquid levels within horizontal DOT and Stationary ASME Tanks with 1 FNPT tank gauge port openings. Designed to replace rotary style gauges in tanks with fluid capacities greater than 2,300 gallons. Suitable for use in bobtail, transport, and bulk storage applications. Marshall Excelsior s exculsive wedge design allows for easy installation while greatly reducing time spent inside the vessel. NOTE: The heavy duty design of this gauge requires entering vessel through manway during installation. All stainless steel construction for use with LPG and NH 3 applications Welded tube to coupling design for maximum strength and durability Installation requires manway Converts rotary style gauge to heavy duty Accu-Max style for both mobile and stationary applications Integral spring-loaded shock absorber for arduous over-the-road application Easy to read flow indicator with Glow arrow shows if valve is open/closed Easy to assemble Dial face 100% sealed and argon filled to prevent moisture build-up and fogging Factory set and precision tuned for superb accuracy Dial face and mounting hardware universal with other industry standard gauges Mounts to all standard 1 NPT tank coupling adapters Custom lengths available upon request Available with classic style dial face Patent Pending Wand F F

61 GAUGES & ACCESSORIES GAUGES & ACCESSORIES ORDERING INFORMATION for Taylor Products - Visible Gauges Order Visible Gauges by their code/item number. Code/item numbers are stamped on the heads of all gauges. Gauges produced before 2008 are stamped on the top of the head and those produced after 2008 are stamped on the sides of the head. Old Style Location of code/item number New Style Float Gauges for Lift Truck Cylinders TAYLOR PRODUCTS Tank Type Junior Head 3/4 NPT 1-1/4 NPT Size No. Service JD060A TD060A 20, 33, 43 Horizontal JU160B UU160B TU160B 33 Universal JU212A UU212A TU212A 43 Universal JA216A 43 Vertical JU086B TU086B 20 Universal JU160B 2-1/32 Bolt Circle Junior Head - 4 Bolt GAUGE SIZE MOUNTING LOCATION 2-1/2 Bolt Circle Senior Head - 4 Bolt ORDERING INFORMATION for other gauges and pressure vessel gauges If the code is not easily visible, specify the following when ordering: 1. Type of Service - LP-Gas or Anhydrous Ammonia (NH 3 ). 2. Gauge Size or Head Type - Specify Junior Size, Senior Size, Visible 4, 3/4 Threaded, 1 Threaded, 1-1/4 Threaded, Roadmaster or Master Gauge Model (4 bolt or 8 bolt). Domestic Gauge TAYLOR PRODUCTS Tank Tank Junior Senior Screw In 1 Screw In 1-1/4 Size No. Diameter JA124l TA130AP Horz 420# 24 JA154A SA160A HA156AP* TA156AP* 250, JA192J SA194A HA194AP TA194AP JA206l SA214A HA210AP TA210AP JA250J SA230E HA254JP TA254NS Vert 420# 30 *Denotes drop in dial JA1241 (Top Mount) H Dimension H (End Mount) (Side Mount) VERTICAL DOT X Distance H (Angel Mount) 3. Type Mounting - Top, side, end, or angle (if angle, specify angle above horizontal center line). 4. Provide Dimensions H = Distance from tank surface to gasket surface. D = Inside diameter of tank or cylinder. 5. Dimensions for Vertical Cylinders only: X = Distance from center of adaptor to nearest inside wall. O = Cylinder height. H = Distance from tank surface to gasket surface. Universal Dial Kits Dial Size TAYLOR PRODUCTS 13000S Junior Squibb Senior Squibb Junior Squibb Kit Senior Squibb Kit Junior JR Blank Flange Senior SR Blank Flange H Dimension Hemispherical O Height Semi-Ellip. Distance Angle Horizontal Centerline Road Master Gauges TAYLOR PRODUCTS Part No. Tank Diameter F Footing RM RM RM RM RM RM RM RM RM RM RM RM Road Master Gauge F

62 GAUGES & ACCESSORIES GAUGES & ACCESSORIES Eliminator Direct-reading Float Gauge TAYLOR PRODUCTS LPG Threaded Float Gauges CAVAGNA GROUP Eliminator Gauge Back of Eliminator Gauge Part No. Tank Diameter EL EL EL EL EL EL EL EL EL EL EL EL EL EL EL EL EL The Eliminator Direct-reading Float Gauges are used to determine when the maximum fill level has been reached in large tanks up to 96. These gauges are not to be used in filling tanks. Nominal Diameter Tank Container Capacity Dimension (mm) Container Ø Inches Ø mm Type Gallons Liters A B Connection 2069.U U / /1, U Horizontal 500 1, U1 41 1, ,000 3, U1 48 1, U Vertical 2076.U SO.U1 Horizontal * * 20SV.U1 Vertical * * 2069.U1-1/ U1-1/ / /1, U1-1/ Horizontal 500 1, / U1-1/4 41 1, ,000 3, U1-1/4 48 1, All Level Gauges are produced in compliance with the CEN TC 286-prEN standard. The float is made in SPANSIL rubber. This kind of material cannot be detached from its lodging when in touch with caustic soda. These level gauges have been manufactured in accordance with the best available technology: a tropicalized zamac has been used both for the head and the gearing. LPG Float Gauges Flanged Four Bolt Model CAVAGNA GROUP Nominal Diameter Tank Container Capacity Dimension (mm) Ø Inches Ø mm Type Gallons Liters A B 2069.U U / /1, U Horizontal 500 1, U 41 1, ,000 3, U 48 1, U Vertical Float gauges flanged four bolt models include a mounting. Rotary Gauge System Length in Inches (Diameter of Tank) Model Number 68 O-31 L O-31 L O-31 L O-31L Dial only LP O-323 CAVAGNA GROUP F Cavagna Group rotary gauges can be used on stationary or mobile tanks to visually indicate the amount of LP-Gas in the container. They are also used in filling the tank to the proper liquid level. On mobile applications and some large stationary storage tanks, hangers are recommended to support the horizontal length of the dip tube. The gauge is operated by opening the small bleed orifice when the tube is in the vapor space of the tank. Moving the pointer on the dial causes the end of the tube to move until it contacts liquid in the container. At that point, discharge from the bleed orifice turns from vapor to liquid and the rotary gauges dial gives the volume percentage of liquid in the tank. Gauges fit 1 coupling container connections. All gauges have stem and dip tubes with an extra large inside diameter. This assures that the correct liquid level can be obtained quickly. F

63 PUMPS PUMPS 1 Pumps BLACKMER 1-1/4 and 1-1/2 Pumps BLACKMER G FG1281 Series Capacity Pump Delivery in GPM Range Speed 50 PSI 100 PSI (GPM) (RPM) DIFF DIFF LGF1 LGB1 LGF1P LGB1P 1 Flanged Mounted 1 Bracket Mounted 1 Flanged Mounted 1 Bracket Mounted Blackmer s 1 Pumps are ideal for cylinder-filling, motor fueling and for supplying small vaporizers. These pumps are fitted for both LP-Gas and anhydrous ammonia service. Capacity Pump Delivery in GPM Range Speed 50 PSI 100 PSI (GPM) (RPM) DIFF DIFF LGL /4 Foot Mounted LGL /2 Foot Mounted Blackmer s 1-1/4 and 1-1/2 Pumps offer higher capacities than the LFG1/B1 Series pumps. They are suited to a variety of small transfer jobs, but are especially popular for multi-purpose cylinder-filling systems. LGL125 G 1 Pump Assemblies with Base Mounting BLACKMER Standard Pump Delivery in GPM Motor Speed 50 PSI 100 PSI Size (HP) (RPM) DIFF DIFF 1LGB1D1 1 Bracket Mounted LGL /2 Foot Mounted /2 High Pressure LPG Pump BLACKMER Capacity Range (GPM) Inlet Discharge LGL158A 1-1/2 Foot Mounted , 300# Flanged 1-1/2, 300# Flanged APPLICATIONS: Single and dual hose fuel dispenser Above ground tank applications LGB Series LGB Series Pumps have brackets for foot mounting to a conventional baseplate. Motors ordered for these units are furnished to customer specifications. Standard motors listed here are single phase and explosion-proof. Aerosol filling Vaporized feed Underground tank applications Other high differential pressure liquefied gas applications LGL158A 1 Pump Assemblies with C-Face Mounting BLACKMER 2, 3 and 4 Pump Assemblies with Base Mounting BLACKMER LGF Series Motor Size (HP) Appox. Delivery in GPM Motor 50 PSI 100 PSI Speed DIFF DIFF 1LGF11 1LGF1P1 1 Flanged Mounted LGF1P The LGF Series Pumps mount directly to standard C-face, 1750 rpm motors with flexible coupling. They are UL Listed and are suitable for continuous duty. An explosion-proof switch for remote mounting is provided. Motor Size* Pump Delivery in GPM Speed 50 PSI 100 PSI (RPM)** DIFF DIFF 2LGLD2VB HP 660, , 50 57, 41 2 Base Mounted with V-Belt Drive 2LGLD2VB5 5 HP 420, , 30 30, 23 3LGLD3VB15 15 HP 640, , , 84 3 Base Mounted with V-Belt Drive 3LGLD3VB10 10 HP 420, ,59 60, LGLD4VB20 20 HP Base Mounted with V-Belt Drive LGLD4VB15 15 HP *Recommended motor size **With 1750 RPM Motor 1-1/4 and 1-1/2 Pump Assemblies with Base Mounting BLACKMER Standard Pump Delivery in GPM Motor Speed 50 PSI 100 PSI (GPM) (RPM) DIFF DIFF 3LGL125D2 1-1/4 Foot Mounted LGL150D3 1-1/2 Foot Mounted Blackmer s 2 and 3 Pump Assemblies with Base Mounting units have high-torque V-belts and quick disconnect sheaves. Units come complete with belt guard, pump mounted to base plate, and mounted to standard motor. The 4 Pump Assemblies with Base Mounts have high-torque V-Belts and quick disconnect sheaves. Sheaves and hubs are a two-part assembly that comes apart easily. Units come complete with belt guard, pump mounted to base plate, and mounted to standard motor. 3LGLD3VB10 LGL Series The 3LGL125D2 and 3LGL150D3 is the foot-mounted version of the LGL125 and LGL150 Series Pumps. The pump is mounted to a steel baseplate and furnished with a flexible shaft coupling and connected to a standard motor. A coupling guard is included. Listed motors are three phase and explosion-proof

64 PUMPS PUMPS 2 and 3 Pumps - Double Ended Shaft BLACKMER 4 Truck Pump BLACKMER G LGLD2 Capacity Pump Delivery in GPM Range Speed 50 PSI 100 PSI (GPM) (RPM) DIFF DIFF LGLD2 1-1/4 Foot Mounted LGLD3 1-1/2 Foot Mounted The 2 and 3 Double Ended Shaft Pumps are ideal for bulk plant service, multiple cylinder filling applications, vaporizers, bobtails, and transports. 3 Truck Pump BLACKMER TLGLF4 Delivery in GPM Capacity Pump 50 PSI HP 100 PSI HP Range Speed DIFF REQD. DIFF REQD. (GPM) (RPM) Flange Mounted The TLGLF4 Series Transport Pump is designed to mount to 4 internal valves. It is suitable for both LP-Gas and anhydrous ammonia service. Ideal intake conditions assure maximum pumping rates and the shortest possible transport turnaround time. TLGLF4 G TLGLF3 TLGLF3 Delivery in GPM Capacity Pump Range Speed 50 PSI HP 100 PSI HP (GPM) (RPM) DIFF REQD. DIFF REQD Flange Mounted The TLGLF3 Series Pump flange mounts directly to the truck tank in combination with the flanged internal control valve. Because it eliminates the intake line and related restrictions to flow, it also eliminates the cavitation problems caused by them. That means longer pump life and higher effective pump capacity. Regenerative Turbine Pumps for Liquefied Gas Applications BLACKMER Capacity Range (GPM) Inlet Discharge RC20 Regenerative GPM DN 25/1 NPT(F) DN 25/1 in. NPT(F) RC25 Turbine GPM DN 25/1 NPT(F) DN 25/1 in. NPT(F) RC40 Pump 52.8 GPM 1 NPT, Flanged to 1-1/2 NPT, Flanged to suit 1 ANSI Class suit 1-1/2 ANSI Class 300 and DN25 DIN 300 and DN40 DIN PN40 PN40 The Ebsray Model RC20 & RC25 Regenerative Turbine Pumps are designed and precision-built for high-pressure transfer of LPG, autogas, propane, butane, DME and anhydrous ammonia. RC25 4 Pump - Double Ended Shaft BLACKMER Capacity Pump Delivery in GPM Range Speed 50 PSI 100 PSI (GPM) (RPM) DIFF DIFF LGLD4 4 Foot Mounted The Ebsray Model RC240 Regenerative Turbine Pumps are single-stage regenerative turbine pumps designed for handling LPG and other gaseous liquids including Autogas, DME, Aerosols, CO2, Industrial refrigerants and Anhydrous ammonia. RC40 LGLD4 The LGLD4 Pump Series is suitable for handling both LP-Gas and anhydrous ammonia. These models are used in bulk plant applications where high transfer rates are desirable. For more information on Blackmer products or installation instructions contact your MTankCo. representative

65 PUMPS PUMPS Pump Parts List BLACKMER Pump Parts List BLACKMER G G Blackmer Parts List for pump models: LGF1E, LGB1E, LGF1PE, LGB1PE, LGF1D, LGB1D, LGF1PD, LGB1PD, LGF1C, LGB1C, LGF1PC, LGB1PC Mechanical Seal Mounting Bracket Ref Part Parts Per Part Name No. No. Pump Adjusting Screw Relief Valve (R/V) Locknut Adjusting Screw Cover R/V 1 4A O-ring Spring Guide Spring Guide R/V Spring R/V Valve R/V 1 9A Disc R/V O-ring R/V Cover Cylinder LGF1, LGB Cylinder LGF1P, LGB1P Rotor and Shaft Assembly, Six Vane 2 (Includes Ref. Numbers 24A and 24B) Vane Duravane (Std.) 3 4, Head Capscrews Head Ball Bearing 2 24A Locknut Bearing 2 24B Lockwasher Bearing Gasket Bearing Cover Bearing Cover Capscrews Bearing Cover 4 Ref Part Parts Per Part Name No. No. Pump 28A Bracket Mounting Screws 4 28B Bracket Mounting Screws 4 28C Guard Screw Coupling Half Pump Coupling Half Motor (56C) Coupling Half Motor ( TC/184C) Coupling Spider Key Shaft O-ring Head Gage Plug (1/4 ) 2 73A Gage Plug (3/4 ) Grease Fitting 2 76A Grease Relief Fitting Grease Seal Bracket - (Base Mount) - LGB1(P)D Bracket (C-Faced Footless) - LGF1(P)D 1 108A Capscrews Bracket 4 108B Bracket (C-Faced Footed) Guard Tool - Locknut Kit Maintenance (4-Vane) Kit Maintenance (6-Vane) 1 Included in Maintenance Kit 2 Discontinued D and C models shipped with a 4-vane rotor. The current 6-vane rotor is fully interchangeable as long as the slotted vanes (pn ) are used. The current slotted vanes (pn ) may be used in either the 6-vane or 4-vane rotors. The discontinued solid vanes may be used in the 4-vane rotors ONLY. Always install the vanes with the slot facing the direction of rotation. 3 To fit the LGB1(P)C, LGF1(P)C use: Ref. No / respectively, Ref. No , Ref. No , Ref. No , Ref. No , Ref. No. 28A and B , Ref. No. 73A , and Ref. No / respectively. Pump Parts - Mechanical Seal BLACKMER Pump Parts - Mounting Bracket BLACKMER Ref Part Parts Per Part Name No. No. Pump Mechanical Seal Assembly 2 153A Jacket Assembly Seal 2 153B Stationary Seat (Steel) 2 153D O-ring Stationary Seat (Buna-N) 2 153F Seal Face (Carbon) 2 153G O-ring Rotating (Buna-N) 2 1 Included in Maintenance Kit * Reference numbers 153A, 153B, and 153F are not available Blackmer Mechanical Seal Parts List for pump models: LGF1E, LGB1E, LGF1PE, LGB1PE, LGF1D, LGB1D, LGF1PD, LGB1PD, LGF1C, LGB1C, LGF1PC, LGB1PC Ref Part Parts Per Part Name No. No. Pump 108B Bracket (C-faced footed) LGF1(P)D

66 PUMPS PUMPS Pump Parts List for Pump Model TLGLF3C BLACKMER Mechanical Seal Parts for Pump TLGLF3C BLACKMER G Ref Part Parts Per Part Name No. No. Pump Mechanical Seal Assembly 2 153A ** Stationary Seat (Steel) 2 153B ** Seal Face (Carbon) 2 153C ** Jacket Assembly 2 153D O-ring - Stationary (Buna-N) 2 153E O-ring - Rotating (Buna-N) 2 1 Included in Maintenance Kit and Rebuild Kit **Mechanical Seal Ref. No. 153 is only sold as a complete assembly. Ref. No. 153A, 153B, and 153C are not available as separate replacement parts. Mechanical Seal Parts G Optional Hydraulic Motor Adapter Parts for Pump TLGLF3C BLACKMER Ref Part Parts Per Part Name No. No. Pump Cover - Relief Valve (R/V) Capscrew - R/V Cover Spring - R/V Valve - R/V O-ring - R/V Cover Casing Rotor and Shaft Assembly Vane - Duravane Head Capscrews - Head Ball Bearing 2 24A Locknut - Bearing 2 24B Lockwasher - Bearing Gasket - Bearing Cover Bearing Cover Capscrews - Bearing Cover Key - Shaft Liner Flange - 2 NPT Flange - 2 Slip-on Weld Flanged Elbow - 2 NPT Flanged El - 2 Socket Weld Blank Flange for Auxiliary Inlet 1-2 Ref Part Parts Per Part Name No. No. Pump 42A ,3 O-ring Flange 2-5/8 x 2-7/8 (current) O-ring Flange 2-1/2 x 2-3/4 (older pumps) 2 42B Capscrew - Flanges Disc O-ring - Head Gage Plug Key - Liner Grease Fitting 2 76A Grease Relief Fitting Push Rod Grease Seal Dirt Shield Shaft Protector Tool - Locknut Kit Maintenance Kit Maintenance with R/V Kit Rebuild Kit Rebuild with R/V 1 Included in Maintenance Kit and Rebuild Kit 2 Included in Rebuild Kit 3 Larger O-ring introduced October Additional parts included in Kits with R/V 5 Includes reference number 24A and 24B Ref No. Part No. Part No. Parts 1-1/4 Hyd 1-1/4 Hyd Part Name Per Motor Shaft Motor Shaft Pump * Hydraulic Motor Adapter Kit * 26A Gasket Hydraulic Motor Adapter 1 28A Capscrew Hydraulic Motor Adapter/Head Coupling w/ Setscrew Straight Key Hyd. Motor Shaft N/A Key Coupling Grease Fitting 1 76A Grease Relief Fitting Hydraulic Motor Adapter SAE A Flange 1 135A Capscrew Adapter/Motor 2 *Hydraulic Motor Adapter Kits shipped prior to Spring 2002 were a two two-piece design. Optional Hydraulic Motor Adapter Parts

67 PUMPS PUMPS Coro-Flo C Model CORKEN Z3200 and ZH3200 Truck Pumps CORKEN G C-Model C-Models Gal/Min On-Off FNPT FNPT at 50 lb. HP PH Volts Switch Inlet Outlet Differential C /4 6.5 C /230 Yes 15 1 C /2 22 C /460 No 32 Corken s LPG Coro-Flo C Model Series are regenerative turbine liquid pumps with NPT or 300# ANSI flange connections. They are for cylinder filling, bottle filling, and dispenser cabinet applications. Handles liquefied gasses without flashing Floating impeller has long life and low maintenance Heavy duty bearings Space saving compact design Pump Differential Approximate Delivery Brake HP Pump Torque Speed Pressure of Propane* Required Required RPM PSI (KPA) GPM (L/Min) BHP (KW) T LB (N M) Z3200 and ZH3200 *Delivery times are approximate (345) 112 (424) 6.2 (4.6) 43.4 (58.9) (689) 99 (375) 9.9 (7.4) 69.3 (94.0) (345) 95 (360) 5.2 (3.9) 42.0 (57.0) (689) 84 (318) 8.2 (6.1) 66.3 (89.9) (345) 86 (326) 5.0 (3.7) 41.3 (56.0) (689) 76 (288) 7.8 (5.9) 64.8 (87.9) (345) 70 (265) 3.8 (2.8) 39.9 (54.1) (689) 62 (235) 5.8 (4.3) 60.9 (82.6) Corken s Z3200 and ZH3200 Model Series control thrust loads and cavitation to ensure extended pump life. The Z pump thrust bearing design is rated up to 4,000 lb. of thrust. These pumps last longer, are superiorly quiet, and need service less often than other pumps because of their new materials and design. Z3200 G TECHNICAL SPECIFICATIONS: Inlet: C10: 1-1/4 NPT, C12 through C14: 1-1/2 NPT, 300# ANSI optional; Outlet: 1 NPT, 300# ANSI optional; RPM: 60 Hz, limited use in RPM; Max. Working Pressure: 400 PSIG (27.6 bar); Max. Differential Pressure: C10: 75 PSIG (5.2 bar), C12: 100 PSIG (6.9 bar), C13,C14: 125 PSIG (8.6 bar); Driver Range: 1-3 hp (0.75 to 2.2 kw); Temperature Range: -25 to 225 F (-32 to 107 C); Flow Range: 3 to 8 GPM (7.6 to L/min) F-Model Coro-Flo F Model FNPT Inlet FNPT Outlet Gal/Min at 20 lb. Differential F /4 12 F F / F CORKEN Corken s LPG Coro-Flo F Model Series are regenerative turbine liquid pumps with NPT or 300# ANSI flange connections. The pumps are either foot mounted (F-Models) or direct mounted (DS- or DL- Models). Applications for these pumps include under and aboveground, autogas dispensing, multiple cylinder filling stations, vaporizer feed-high pressure, and direct, high pressure asphalt burner feed. Z4200 Truck Pumps Pump Differential Approximate Delivery Brake HP Pump Torque Speed Pressure of Propane* Required Required RPM PSI (KPA) GPM (L/Min) BHP (KW) T LB (N M) (345) 369 (1,397) 12.5 (9.3) 87 (118.0) (689) 325 (1,230) 25.1 (18.6) 175 (237.3) Z (345) 316 (1,196) 10.8 (8.0) 87 (118.0) (689) 278 (1,052) 21.7 (16.1) 175 (237.3) (345) 289 (1,094) 9.9 (7.3) 87 (118.0) (689) 254 (961) 20.0 (14.8) 175 (237.3) (345) 236 (893) 8.3 (6.2) 87 (118.0) (689) 208 (787) 16.7 (12.4) 175 (237.3) *Delivery times are approximate The Z4200 Truck Pump is used on transports requiring capacities of GPM. It is designed with 300 lb. ANSI flanges for maximum strength. The belly-mount flange design minimizes cavitation and increases pumping efficiency. CORKEN Z4200 Handles liquefied gasses without flashing High flows and differential pressures are ideal for dual hose and multiple dispensers Heavy duty bearings Single mechanical seal allows easy replacement and maintenance Floating impeller has long life and low maintenance TECHNICAL SPECIFICATIONS: Inlet: F/DS/DL 9 through 10, 1-1/4 NPT; F/DS/DL 12 through 14, 1-1/2 NPT; 1 NPT, 1 or 1-1/2 300# ANSI optional; Outlet: 1 NPT, 300# ANSI optionai; RPM: 60 Hz, 50 Hz; Rotation: Clockwise only; Max. Working Pressure: 400 PSIG (27.6 bar); Max. Differential Pressure: 150 PSIG (10.3 bar)1; Optional Driver range: 1-10 hp (0.75 to 7.5 kw); Temperature Range: -25 to 225 F (-32 to 107 C); Flow Range: 2 to 36 GPM (7.6 to L/min); Maximum Viscosity: 400 SSU (88 cst)

68 PUMPS PUMPS Coro-Vane Stationary Pump 521E Series CORKEN Coro-Vane Stationary Pump Z Series CORKEN G E21E Inlet Outlet Internal Relief Shipping Weight 521E 2, 2-1/4 2, 2-1/2, 1-1/2 Yes 132 lb. NOTE: Add 103 after the prefix Item Number to indicate baseplate-motor slide base, v-belt, and pulleys with belt guard, i.e. 521E103. Corken s Coro-Vane Pumps are positive displacement pumps typically used for cylinder filling, loading and unloading of bulk trucks, and transport trailers. They produce a maximum differential pressure of 125 PSIG. Floating rotor requires no adjusting or shims Hydraulically actuated vanes O-ring gasket construction Ductile iron pump body Self-adjusting sliding vanes RPM Gal/Min (5 HP Motor) Differential Pressure No troublesome pins or springs behind blades Run up to 950 RPM Replaceable liner RPM Temperature Maximum Range Range Working Maximum Maximum Flow Differential Driver Range Pressure Pressure Size Z F 400 PSIG 150 PSID 20 HP PGM Z F 400 PSIG 125 PSID 25 HP PGM The Z3500 Stationary and Truck Pump is a 3 pump designed for stationary and foot mounted truck applications. It has a locked rotor design to ensure long pump life and excellent performance. With higher flow rates than other 3 pumps, the Z3500 retrofits Corken s and other competitive pumps with little or no change in piping. The Z3500 Pump is used for loading and unloading single and dual bobtails and road tankers. The Z4500 Stationary Pump is a 4 pump designed for transport loading and multiple bobtail loading applications. If you have two or more bulkheads to load bobtails and transports and would like to shorten your fill times, then the Z4500 is the stationary pump for you. The Z4500 can fill two 3,000 gallon bobtails in 20 minutes or less at typical operating RPMs. Z3500 AND Z4500 Large diameter non-metallic pins allows higher RPM operation Easy inspection and maintenance Patented needle roller thrust bearings rated for 4,000 lb. minimizing sideplate wear No field adjustment is required Z3500 G Coro-Vane Stationary Pump FF Series Inlet Outlet Mounting Shipping Weight FF075 FF /2 ANSI 1 ANSI Frame Mount 63 lb. CORKEN Cam and blades are made of high tech materials, extending the life of the pump Reversible side-plates add twice the life Up to 7% or more capacity at 640 RPM Rated up to 800 RPM Replaceable liner Z4500 Corken s FF075 and FF150 Series are are positive displacement pumps. They produce a maximum differential pressure of 125 PSIG and are typically used for cylinder filling, loading and unloading of bulk trucks, and transport trailers. These pumps have the option of belt drive or gear drive with reducer. FF075 Stainless steel impeller, sleeve, seal housing, and shaft Ductile iron pump body and rotors Self-adjusting sliding vanes Run up to 950 RPM Replaceable liner FF

69 CORKEN PUMP REPAIR PARTS CORKEN PUMP REPAIR PARTS Coro-Flo Pump Repair Parts - C and F Models CORKEN Pump Parts CORKEN G Coro-Vane LPG Z Series Pump Repair Kits Part Pump No. Seal Kit Brass Impeller C Model Motors Motor HP C10 F10 C12 F12 C13 F13 C14 F14 113CXA CORKEN Z200 Z3200 Z3500 Z4200 and Z4500 Repair Kit No. 3193X1 Repair Kit No. 3195X1 Repair Kit No. 3195X2 Repair Kit No. 3197X1 Seal Assembly (Qty) 4431XA2 (2) 4431XA2 (2) 4431XA2 (2) 4464XA2 (2) Roller Bearing (Qty) 2754X (2) 2754X (2) 2754X (2) 4460X (2) Outer Race Thrust Bearing (Qty) 4432 (2) 4432 (2) 4432 (2) 4453 (2) Thrust Bearing Mtg Ring (Qty) 4435 (2) 4435 (2) 4435 (2) 4454 (2) Grease Seals (Qty) 4441 (2) 4441 (2) 4441 (2) 4463 (2) Blades/Vanes (Qty) 4428 (6) 4232 (6) 3936 (6) 4448 (6) Blade/Vane Driver (Qty) 4262X (3) 4262X (3) 5554X (2) 4449X (5) Sideplates (Qty) *4427 (2) *4231 (2) *3938 (2) *4446 (2) Case O-ring (Qty) *2-261A (2) *2-262A (2) *2-268A (2) *2-270A (2) Inlet Flange O-ring 2-231A *2-259A Aux Inlet Flange O-ring 2-234A Outlet Flange O-ring (Qty) 2-231A (2) 2-234A (2) *2-245A 2-231A R Valve Cap O-ring 2-224A 2-224A 2-228A 2-234A Bearing Cap Shim (0.002) (Qty) 4439 (8) 4439 (8) 4439 (8) 4458 (8) Bearing Cap Shim (0.010) (Qty) (2) (2) (2) (2) Bearing Cap Shim (0.020) (Qty) (2) (2) (2) (2) Shaft Key Cam/Liner *4414 *4242 *5539 *4443 Rotor and Shaft 4430X2R *4495X2R *12081X6R *4444X *C model motors are single phase, except for the C HP * 3 Part Models Standard Optional Material Material Case, Cover Ductile Iron ASTM A536 Impeller Copper Alloy ASTM B584, UNS C92300 Steel and (Also Known as Navy Bronze) Stainless Steel Impeller Key Steel, Zinc Plated Seal Seat All Silicon Carbide Seal Rotor Carbon Seal Metal Parts Stainless Steel Seal Sleeve Aluminum Seal Housing Nickel-Aluminum-Bronze Shaft Steel Stainless Steel Frame FF/FD Gray Iron ASTM A48. Class 30 DLF/DLD DLF/DLD: Ductile Iron ASTM A536 Bearing Cap Ductile Iron ASTM A536 O-rings *Neoprene Buna-N, Viton, All Buna-N, Kalrez Retainer Rings Steel Bearings Ball * Neoprene and Viton are registered trademarks of the DuPont Company. G *Items not included in Kit Coro-Vane Stationary Pump 521E Repair Kit Part 521E Stationary Pump Repair Kit No. 2904X2 Seal Assembly (Qty) 1769XRA (2) Bearings (Qty) 2754X (2) Grease Seals (Qty) 1358 (2) Blades/Vanes (Qty) (10) Sideplates (Qty) (2) Case O-ring (Qty) 2-261A (2) *Items not included in Kit, but may be ordered Part 521E Stationary Pump Repair Kit No. 2904X2 Inlet Flange O-ring 2-234A Outlet Flange O-ring 2-234A R Valve Cap O-ring 2-224A RV Adj Screw O-ring 2-112A Cam/Liner* Rotor and Shaft* 11661X1R CORKEN

70 MOTORS METERS & REGISTERS Three Phase Explosion Proof Motors BALDOR Positive Displacement Meters MA 7 LIQUID CONTROLS G EM7174T L5018 HP RPM Volts Frame Full Load Amps Weight EM7018T-1 1-1/ / T EM7042T / T EM7044T / T EM7072T / T EM7047T-1 7-1/ / T EM7170T / T EM7174T / T EM7054T / T EM7056T / T EM7058T / T Single Phase Explosion Proof Motors HP RPM Volts Frame Full Load Amps Weight VL5023A* /230 56C VL5024A * 1-1/ /230 56C 8 76 L5030T 1-1/ / T L / L5028T / T L *C faced motors for Blackmer pumps METERS & REGISTERS BALDOR MA-7-GY-10 MA-7-GY-10-LCR2 MA-7-GY-10-LCRP MA-7-GY-10-LCR2-EV MA-7-GY-10-LCRPV 2 Meter with Mechanical Totalizer/Printer, TVC, 100 Mesh Strainer, L - R 2 Meter with LCR2, ETVC, 100 Mesh Strainer, L - R, ST221 Software Same as Above with Preset 2 Meter with LCR2, ETVC, 100 Mesh Strainer, L - R, ST221 Software, Electronic Vapor Eliminator Same as Above with Preset The MA-7 Positive Displacement Meter is designed for LPG truck and bulk loading applications. Accessories may be rotated 180º or covers swapped to reverse direction of flow. 100 GPM (380 L/min.) capacity Precision machined parts Class 10 construction Class 12 construction for NH 3 (Anhydrous Ammonia) service is available upon request Offers mounting flexibility Positive Displacement Meters MA 5 and MA4 Choice of 2 NPT standard, and 1-1/2 optional companion flanges Accessories: Vapor eliminator, strainer (100 or 200 mesh), screen, diaphragm valve Mechanical or electronic registration Optional temperature/volume compensation LIQUID CONTROLS MA-5-CX-10 Standard Meter w/air Eliminator, Strainer, Differential Valve, and Counter MA-5-CY-10 Same as MA-5-CX-10 Except: with Temperature Volume Compensator MA-5-GX-10 Same as MA-5-CX-10 Except: with Printer MA-5-GY-10 Same as MA-5-CX-10 Except: with Printer and Temperature Volume Compensator MA-4-CX-10 Standard Meter w/air Eliminator, Strainer Differential Valve and Counter MA-4-CY-10 Same as MA-4-CX-10 Except: with Temperature Volume Compensator MA-4-GX-10 Same as MA-4-CX-10 Except: with Printer MA-4-GY-10 Same as MA-4-CX-10 Except: with Printer and Temperature Volume Compensator METER MA-7 G RL100108A12 Liquid Meters In/Out Min/Max Temperature Register Size Gal/Min Compensation RL100108A12, 1 3/4 FNPT 3-18 GPM 600 (AAAAD) No RL100118A23 3/4 FNPT 3-18 GPM 600 (AAAAF) RL12521RGD1 1-1/4 FNPT 5-30 GPM RL15021RGD1 1-1/2 FNPT GPM Yes RL20021RGD2 2 FNPT GPM RL2002N21RGD2* 2 FNPT GPM *Ductile iron body, all others are aluminum NEPTUNE The MA-5 Positive Displacement Meter is designed for LPG truck and high speed motor fuel applications. Rate of flow GPM ( L/min.) capacity range. The MA-4 Positive Displacement Meter is designed for LPG motor fuel applications. Rate of flow 5-30 GPM ( L/min.) capacity range. MA 5 AND MA4 METERS Carbon insert bearings reduce friction and wear Precision machined parts Low pressure loss increases maximum flow rate system No planned obsolescence allows rebuild rather than replace Offers mounting flexibility For operation at any non-shock working pressure up to 350 PSI Choice of 1-1/2 NPT standard, and 2 optional companion flanges Accessories may be rotated 180º Covers may be swapped to reverse direction of flow METER MA-5 (MA-5-CX-10)

71 METERS & REGISTERS PLANT & VEHICLE REMOTE CONTROLS LectroCount TM Electronic Meter LIQUID CONTROLS ProControl 2 Remote Readout BASE ENGINEERING INC. G LectroCount Meter LectroCount is an electronic register that replaces the mechanical register, calibration gears and/or adjuster mechanism traditionally used on many flow meters. It is designed to meet, even adapt to, your flow meter and process control instrumentation requirements. Weights and Measures (custody transfer) approved advanced microprocessor based electronic registration, presetting and printing control systems Accepts pulse input from most flow meters Electronic Registers E1000 and E4000 Rated NEMA-4 non-incentive Class 1, Division 2, Group C and D RS communications capable NEPTUNE Neptune s Electronic Registers automate transaction operations for deliveries of LPG, commercially distributed liquids, and distillate fuels through flow meters on bulk delivery trucks. The ProControl 2 Remote Readout is an all-in-one controller that greatly improves delivery efficiency and reduces costly fueling mistakes. Easily retrofitted to existing trucks or installed on new equipment, this patented system is ATEX certified for use throughout the world in hazardous locations. A RFID option is available with the ProControl 2. RFID Option allows customer tank interlock, fleet refueling, ID capture, product manifold interlock and asset tracking. Handheld LCD display shows the exact meter reading to 1/10th of a unit in real time Direct serial interface with meter register shows a volume identical to the truck mounted register Exact programable delivery amount Kits available for all types of electronic and mechanical registers, including dual metered double pumper trucks Allow simultaneous control of up to eight custom truck operations Hose reel remote control Tank valves can be opened with automatic delay feature to engage PTO/Cargo Pumps Engine RPM can be remotely controlled to increase or decrease pump volume Emergency Stop feature closes all tank valves and stops truck engine Available with 5-minute Query automatic emergency shut-down feature ProControl 2 Remote Readout with RFID H E1000 Direct retrofit to RL100 Electronic calibration with K factor Displays volume or flow rate in gallons, liters, or barrels Automatic reset Programmable time-out between deliveries Easy to read six digit display with up to three decimal places Two year replaceable 3.6V lithium battery Non-resettable totalizer Operating temperature range -13 to 158 F NEMA 4x enclosure E4000 Compatible with automation technologies Easy to use, menu driven display Start with simple pump and print (imitate your mechanical register) Electronic temperature compensation provides accurate, rapid response Stand-alone pricing (print invoices directly from the truck) Configure register from laptop computer Add data collection devices without the need for additional register hardware Interface with popular industry office software packages NOTE: Emergency Stop requires manual system reset at truck. Internal valves and pumps cannot be reactivated with the handheld following e-stop. Pressing the e-stop button repeatedly sends the same shut-down signal. Driver can be safely moving away from the truck and be assured of shut-down. E1000 E4000 ASKW Series Remote BASE ENGINEERING INC. ASKW Series LPG and Refined Fuels Remote Control Systems offer unrestricted hose end control greatly increasing productivity and improving safety over conventional truck mounted manual controls. ASKW Series are specifically for fuel delivery truck applications requiring explosion proof, severe-service remote controls. The system is available with one to eight control buttons in a rugged, compact package. Receiver units install easily Prewired electrical harness supplied External antenna/coax provides up to 1,000 ft. (300m) operating range Powerful receiver picks up signal through brick, concrete, and metal walls Receivers are energized only during pumping operations Systems are factory married with unique 32 bit ID codes ensuring the receiver will not work with any other transmitter Internal diagnostic LEDS monitor battery levels, signal connection, and wiring faults for easy troubleshooting Built-in fail-safe feature closes all tank valves with any power loss or truck movement Emergency Stop feature closes all tank valves, and kills the truck engine and pump. The safety latched signal causes the tank valves and pump to remain inoperative until a manual system reset is performed. Pressing the E-Stop button repeatedly will send the same shut-down signal. This system meets International regulatory requirements and is available for all types of pneumatic, cable operated or Flowmatic type tank valves and all truck engines. Emergency Stop ASKW Series

72 PLANT & VEHICLE REMOTE CONTROLS PLANT & VEHICLE REMOTE CONTROLS ASKW Series Remote Controls (continued) BASE ENGINEERING INC. E-Stop Bulk Plant System BASE ENGINEERING INC. H Query Remote Control ASKW Series Engine RPM Remote Control ASKW Series The ASKW Series Query Option is required on LPG delivery vehicles in some countries and is available on all ASKW systems. This feature requires the operator to periodically press a QUERY button on the remote control to keep the pumping system active. If the operator fails to press the QUERY button within a factory specified time an audible warning is first sounded followed by activation of the trucks EMERGENCY STOP system. The operator can press the QUERY button at any time during the delivery or audible warning period and reset the timer. The ASKW Series Engine RPM or Throttle Option allows the operator to increase/decrease truck engine RPM and correspond pump volume from the customers tank/hose-end of the delivery. Operator can begin delivery process, ensure product is flowing safely, then increase pump speed until tank is nearly full. Connections are available for any electronic or mechanical engine control system. The PTO(s) or Pump Option for the ASKW Series Remote extends pump life and increases safety by allowing the operator to engage and disengage the PTO and pump from hose end at the storage tank. Truck PTO shaft is not turning, pump is not running in by-pass, and hose is not charged unless connected to the tank. PTO connection can be electric, pneumatic, hot shift or clutch shift. Remote PTO Delay option automatically opens tank internal valve 5 seconds prior to engaging PTO, allowing pump and product lines to equalize pressure. This feature prevents an excess flow slug situation which when happens, starves the pump of product, and may lead to pump failure. The Hose Reel Option for the ASKW Series Remote remotely unwinds and/or rewinds the hose on or off the reel. Easy to install prewired hose reel motor solenoids and 70 amp breaker is included with this option. System design prevents Unwind and Rewind circuits from being energized at the same time. The E-Stop Bulk Plant Wireless Emergency Shutdown System eliminates costly hard wiring of fixed location emergency stop switches. Any number of wireless remote E-Stop switches can be installed within the plant facility and communicate with one receiver/controller unit. These systems will work in conjunction with existing, hard-wired, manual E-Stop switches and plant safety controls. Operator worn E-Stop remotes can also be added to these systems. NOTE: Daily E-Stop transmitter battery tests and scheduled battery replacement interval is strongly recommended. The E-Stop transmitters and receiver/controller shut-down will NOT operate when the remote E-Stop transmitter batteries are exhausted. ASKM100-AC E-Stop Remote has a fixed-frequency switch that operates at 433mHz using two double A batteries. The transmitter is energized only when E-Stop switch is activated. Battery test button shows a low battery flashing LEd on the E-Stop switch as well as on the receiver/ controller unit. FEATURES AND SPECIFICATIONS: Frequency of Operation: mHz Method of Transmission: 56 bit DES encryption key Rugged weatherproof polymer enclosure External rubber flex antenna 1,000 ft. (300m) operating range Up to 2 miles high powered signal option Operational in 20º F to 185º F Operates on common AA batteries 300 hours battery life with continuous use Intrinsically safe for use in hazardous environments H PTO Remote Control ASKW Series ASKW Series Remote Enable Option can be specified to create a two step process for activating certain buttons to further prevent unintended button operation. The Turn-Key Plug & Play System is available with pre-wired pneumatic solenoids, relays, electric solenoids, and actuators. This system simplifies conversion of existing manual truck controls or up-fit new chassis and tanks. Modular components allow for easy installation and field replacement. Air solenoids are extremely rugged and can be direct mounted to chassis allowing hose-end PTO, tank valve, and cargo pump interlock. DSSF 100-AC System is a direct sequence, spread-spectrum remote E-Stop switch that operates at 2.4GHz using a rechargeable battery pack. The E-Stop switch and receiver/controller unit are connected via SafeLink, a continuous monitoring feature exclusive to BASE Engineering. Any loss of signal connection between the remote E-Stop switch and receiver/controller results in an automatic E-Stop trigger until the signal is restored. High powered E-Stop transmitters have an operating range of up to two miles. Transmitters must be connected to a back-up power supply as the battery pack will operate for only seven days. Back up power can be 12/24VDC, 120/240VAC, and solar powered where practical. FEATURES AND SPECIFICATIONS: Frequency of Operation: 2.4GHz DSS (869.7 and mHz available) Method of Transmission: 56 bit DES encryption key Rugged weatherproof polymer enclosure External rubber flex antenna 1,000 ft. (300m) operating range Up to 2 miles high powered signal option Operates on rechargeable lithium ion batteries (included with 12/24VDC charger) Operational in 20º F to 185º F 30 hours battery life with continuous use Modular Din Rail Components Hose Reel Remote Control ASKW Series Enable Remote Control ASKW Series Turn-Key Remote Control ASKW Series

73 PLANT & VEHICLE REMOTE CONTROLS PLANT & VEHICLE REMOTE CONTROLS E-Stop Bulk Plant System (continued) BASE ENGINEERING INC. Wireless Deadman Series Remote Control (continued) BASE ENGINEERING INC. Standard Wall Mount E-Stop Switch E-Stop Transmitter is a low powered, intrinsically safe device suitable for use in Zone 2, Class 1, Div 2, Group D hazardous environments. Pressing the Emergency Stop button causes the receiver/controller unit to trigger a plant shut-down. The system cannot be rebooted until the E-Stop button is pulled out and a manual receiver/controller reset is performed. E-Stop buttons are dual contact, dual channel, and comply with global E-Stop switch requirements. Systems will fail safe, triggering an automatic E-Stop with any loss of main line electrical power supply to the receiver/controller unit. All systems are CSA, CE, and FCC approved. E-Stop Receiver/Controller easily interface with electrical, pneumatic, nitrogen, or mechanical plant shut-off equipment. RECEIVER FEATURES AND SPECIFICATIONS: Power supply: 12/24VDC (Optional 120VAC systems available) Current load is up to 4 amps per channel or 10 amps total Constructed of impact resistant polycarbonate, IP67 rated Rugged weatherproof polymer enclosure Internally protected and encased antenna (external antenna/coax available) Pre-wired to OEM requirements, quick connect fittings supplied Up to12 programmable channels Optional CAN bus interface is available Mounted Receiver/Controller H NOTE: Standard receiver/controller units are NOT rated explosion proof and are typically installed in non-hazardous electrical control equipment areas. Receiver/controller units are provided with antenna and coax cable for outside antenna mounting providing maximum operating range. Explosion-proof electrical enclosures are available on request. FEATURES AND SPECIFICATIONS: Crane and Service Truck Radio Remote Control BASE ENGINEERING INC. Crane and Service Truck Radio Remote Controls greatly increase jobsite safety by providing the operator the safest vantage point for tank delivery. One-man control eliminates a second person instructing the operator where to position the tank. Operator has freedom of movement around entire worksite while setting tank precisely into position. H Optional Handheld E-Stop Available for any System Operates with 12/24VDC or 120/240VAC power supplies Receiver/controller outputs can be specified as 12/24VdC, 120/240VAC, dry contact, RS232, or J1939 CAN bus Constructed of IP67 rated, impact resistant polycarbonate External antenna/coax included Pre-wired to meet customer requirements Serial Communication: Optional J1939 CAN bus/rs232 interface to OEM serial networks Electric/pneumatic solenoids are available upon request ASKR Model was developed for Crane and Service truck applications. FHSR Model is designed for crane applications requiring interference-free, fail-safe machine control. Operator handheld and machine mounted transceiver continuously communicates to ensure signal validity and strength. Any loss of signal results in all active functions automatically shutting down and failing safe. The FHSR system incorporates a secure frequency hopping, spread-spectrum radio link that greatly reduces outside electrical or RF interference. ASKR Model Deadman Trigger Switch Radio Tansmitter Wireless Deadman Series Remote Control BASE ENGINEERING INC. The Deadman Series Trigger Switch Remote Control is specifically for industrial applications requiring positive operator-to-machine contact. A wireless trigger-switch is used to send RF command signals to the pump. The operator is unencumbered by cables and wires normally used in deadman fueling operations. The Deadman Series incorporates a secure frequency hopping, spread-spectrum radio link that is virtually immune to outside electrical or RF interference. Operations fail safe (shutdown) with any loss of signal from transmitter. Deadman Transmitters are available with Hose Reel, PTO (pump), Engine RPM (throttle), Emergency Stop, and Enable options. TRANSMITTER FEATURES AND SPECIFICATIONS: Frequency of Operation: mHz FHSS (433.92mHz, 869.7mHz and 2.4GHz radios available) Transmitter Power: 100mW Method of Transmission: 56 bit DES encryption key Rugged weatherproof polymer enclosure Internal antenna on card PCB mount Operational in 20º F to 185º F Up to 500 feet operating range (higher power available) Operates on common AA batteries 30 hours battery life with continuous use with audible low battery warning and flashing LED indicator Rechargeable lithium ion cell with 12/24VDC charger Intrinsically safe for hazardous environments DSST Model is designed for proportional hydraulic crane applications requiring up to twelve radio remote control functions. Toggle switch controls with trigger provides variable speed control of hydraulic pump solenoids. Split signal capability allows combined boom movements including up and sideways and extend and winch down. Weatherproof receiver can be crane mounted and interfaces easily to crane electrical system with OEm style plug-in connector. ASKW Model allows up to 8 control functions. Two AA batteries provide 300 hours of continuous use. Parts replacement is simplified with quick connect plugs and simple learn button to link handheld and receiver. Transmitter has low battery warning indicator and button text is printed to customer specifications at time of order. TRANSMITTER FEATURES AND SPECIFICATIONS: Handheld transmitters are available with up to twelve crane control buttons Rechargeable lithium ion cell with 12/24VDC charger RECEIVER FEATURES AND SPECIFICATIONS: Up to twelve pre-programmed high-side outputs available Outputs can be selectively interlocked to other operations for safety reasons Modular components allow for easy installation and field replacement Specifications are similar to the Deadman Series Remote Control Transmitter Interface to OEM crane controls can be simplified with factory installed, direct-plug connectors or through J1939 serial communication (other protocols available) Specifications are similar to the Deadman Series Romote Control Receiver DSST Model ASKW Model

74 PLANT & VEHICLE REMOTE CONTROLS PLANT & VEHICLE REMOTE CONTROLS Passive Transport Leak Detection System BASE ENGINEERING INC. Driver Authorization System (continued) BASE ENGINEERING INC. H LDS 60 LDS 100 Passive Transport Leak Detection Systems are designed for propane, anhydrous ammonia and butane transports. These systems continually monitor the off-loading process looking for a rapid change in discharge pressure. They detect a separated hose or failed connection and close the tank internal valve within half a second. FEATURES AND SPECIFICATIONS: Easy to install No calibration or adjustment Options include multi-pipe or multitrailer sensors, automatic truck engine or PTO shut-down Test button determines a unit s readiness DCE certified to comply with all US DOT and Canadian Transport Canada regulations for Passive Shut Off Power source: 12 volts DC Model LDS 60 is a fully automatic leak detection system for propane and anhydrous ammonia transports. The low powered intrinsically safe control unit continually monitors piping and hose assemblies during the off-loading process. A failed pipe, or hose separation will cause the tank s internal valve to close instantly and sound an audible air-horn alarm. A simple reset button returns the unit to the monitoring state. Model LDS 100 is an automatic leak detection and shut down system designed specifically for LPG and Anhydrous Ammonia bulk transfer. Intrinsically safe unit continually monitors the off-loading process for rate of change parameters signifying broken or damaged hoses, fittings and piping. A leak is instantly detected and stopped by the closure of the tank internal valve(s). The truck s engine can also be stopped and PTO disengaged if desired. This system automatically activates at the end of each load. This ensures that the system is fully operational and helps reduce the possibility of a damaged cargo pump due to product run out. This unit also fails safe and closes the internal valve with a loss of power or the release of the trailer parking brakes. Model DAS1000IGN prevents unauthorized engine start. System is armed automatically each time the key is turned off. Entry of correct user code disarms system and allows engine to be started. Used on all types of vehicles and equipment. Model DAS1000AT prevents unauthorized vehicle movement on vehicles with automatic transmissions. System arms automatically when shifting transmission into park. Shifting the vehicle into drive without entering a valid user ID causes engine to stall. Entry of correct code disarms system and allows engine start. Well suited for any vehicle that needs to be left unattended with engine running. Model DAS1000AB operates the same as Model DAS1000AT with the addition of being armed with the application of the truck s parking brake. This system requires the vehicle to be equipped with air brakes. Releasing the parking brake without entering a valid ID code will cause the engine to stall. Entering a valid ID code disarms the system and allows engine start. Well suited for large trucks with air brakes and engines that need to be left running while the vehicle is unattended. Model DAS1000ABT is similar to Model DAS1000AB, but designed for tractor trailer units with a dedicated trailer parking brake. System is armed with application of tractor or trailer parking brake. Prevents deliberate bypass of authorization system by drivers using trailer brakes verses tractor brakes to park vehicle (see above). Attempting to bypass, disable, or damage any BASE Driver Authorization System will cause the ignition to lock out until repairs are made and a valid code entered. Auxiliary Fuse Panel BASE ENGINEERING INC. H LDS 200AQRF Model LDS 200AQRF is designed to comply with DOT requirements for transports with both metered and bulk discharge capability. Combines all of the features described above for the LDS100 but includes a handheld with remote control Query and Emergency Stop buttons. An audible alarm sounds every 4:30 seconds giving the operator 30 seconds to respond by pushing the Query button. Failure to push the Query button results in automatic activation of the passive shut-down system. Pushing the Query button refills the timer to allow 5 more minutes of offloading. Additionally, the remote E-Stop button gives the operator the ability to activate the passive shut down at any time during the offloading process. Driver Authorization System BASE ENGINEERING INC. Auxiliary Fuse Panels are designed for new or existing truck chassis requiring additional fused connections. Ideal for adding radio controls, work lights, GPS systems, electronic meters to truck electrical system. FEATURES AND SPECIFICATIONS: Adds (6) additional 10 amp fuse connections under dash or on firewall IP67 rated enclosure is sealed against weather and pressure washers Includes: - built-in isolation relays for keyed and fused power supply - battery connection cables and wire harness for six fused input/outputs - all required wire connections Driver Authorization Systems are designed specifically for commercial vehicles and machinery. The system protects the vehicle from unauthorized engine start or movement depending on the customer s application. Keypad unit with hidden enclosure screws Sealed parking brake low pressure switch with DOT quick connect T fitting Sealed engine kill relay sensors, automatic truck engine or PTO shut-down Air line fittings supplied Components are pre-wired with quick connect electrical. Trucks with existing parking brake air pressure switches and engine kill relays, (radio shut down systems) may be able to use some of these components. Contact BASE Engineering at to confirm

75 REELS REELS Pump Hose Reel Parts Anatomy List BLACKMER HANNAY Pump Guidemaster Parts List Parts List (model GM-700) BLACKMER HANNAY H COMPONENTS 1 Bearings - Weight of spool and hose is supported by bearings. 1a Back Bearing 1b Front Bearing 2 Disc - Rolled edges prevent hose damage and add rigidity to disc. Additional strength is provided by a concentric rib. 3 Drum - Roll formed steel with full-length weld. 4 Tie Rods - Join discs and drum to form spool. Reinforced with pipe spacers for rigidity and strength. 5 Chain and Sprocket Drive - Provides smooth positive rewinding on powered reels. H This cutaway illustration shows a typical power rewind reel with an optional auxiliary crank rewind mechanism. All Hannay reels are assembled from combinations of the basic components shown here. Since components are taken from a large inventory, each reel is assembled to the buyer s particular requirements. This cutaway illustration shows a typical power rewind reel with an optional auxiliary crank rewind mechanism. All Hannay reels are assembled from combinations of the basic components shown here. Since components are taken from a large inventory, each reel is assembled to the buyer s particular requirements. CONSTRUCTION Frames, discs, and drum are fabricated of heavy-gauge steel. Bearings are self-aligning. Malleable iron and steel are used for hose reel hub assembly, outlet riser, and swivel joints. Stainless steel, aluminum, and special swivel joint packing can be supplied to meet special requirements. FINISH Standard finish is oven-cured enamel. Finishes other than standard, such as special primers, may be specified at extra cost. TEMPERATURES AND PRESSURES Standard reel construction will handle most liquids or gases at temperatures ranging from -20 to +400 F (-29 to +204 C). Operating pressures available up to 10,000 PSI (690 bar) depending on the specific reel series. These operating pressures and temperatures are shown on descriptive pages in each product catalog. Reels to operate at pressures and temperatures other than standard are available at extra cost. SHIPPING Reels are shipped completely assembled, ready to install. Installation instructions are supplied with each reel. 6 Rewind Motor - Electric rewind motor is shown. Compressed air or hydraulic motors can be used. 6a Electric Junction Box 7 Hub assembly - Includes the fluid hub, the outlet riser, and the reel axle. Fluid passes from the swivel joint inlet through the hub assembly, to the hose. 7a Outlet riser - Contoured to match the curve of the reel drum so hose will wrap smoothly. 7b Fluid hub 8 Swivel joint inlet - Permits reel to rotate freely while connected to the fluid source. Joint is not used as a bearing. Straight or 90 swivel joints are available for most models. (Flexible connector must be used between swivel joint and inlet piping or warranty will be void.) 9 Brake/rewind assembly - Bevel gear rewind has an adjustable tension brake. Rewind and braking devices vary with different models. 10 Front Frame 11 Back Frame 12 Front Foot 13 Back Foot Ref Part Parts Per Part Name No. No. Pump Roller Body Casting w/mounting Bolts* Guide Arm Casting* Mounting Yoke with Bronze Bushings Switch Mounting Bracket* EPS-1 Explosion-Proof Switch Guidemaster Pinlock Assembly, S/S* SST Pivot Pin (with 1/4 Cap Screw and Lock Washer) GM-609 Roller (with 2 Pressed-in Ball Bearings) GM-608 Ball Bearing Guidemaster Bottom Roller Plate* /2 Lock Washer /2-13 Hex Nut 2 1 ORDERING INFORMATION Be sure to specify complete model number, serial number of reel, and part number. Ref Part Parts Per Part Name No. No. Pump /4-20 x 3/4 Socket Head Cap Screw /16-24 x 2-1/2 Plated Bolt with Nut /16-24 Hex Nut Oil-impregnated Bronze Bushing for Yoke /4-20 x 3/4 SST Socket Head Cap Screw /2 Flat Washer Roller Mounting Bolt (Threaded)* /4-20 x 5/8 SST Socket Head Cap Screw and Lock Washer /4-20 X 5/16 Set Screw /8 Flat Washer /8-16 x 3/4 Button Socket Head /8-16 Hex Acorn Nut

76 REELS REELS Reel Series PB/DPB HANNAY Spring Rewind Reel Series PB800 HANNAY PB Series Manual or Power Rewind, 1 to 1-1/2 I.D. Hose, Standard Pressures to 350 PSI (24 Bar) PB800 Handles 3/4 or 1 I.D. Hose, Standard Pressures to 2,000 PSI, Available Up to 6,000 PSI H Series PB Electric Rewind Series PB are explosion-proof reels that are used individually or in pairs for liquid and vapor return hoses. These reels are available in a gear-driven crank rewind, #40 chain and sprocket drive powered by an electric, hydraulic or compressed air motor, or direct drive hydraulic rewind motor. Crank rewind and direct drive reels are supplied with pinion brakes. Power rewind reels (chain and sprocket driven) are supplied with a strap brake. Other sizes and/or threads can be furnished and must be specified when ordering as well as the roller position. 90 ball bearing swivel joint inlet with 1-1/2 female NPT threads Handles pressures to 350 PSI (24 bar) Performs in temperatures -40 F to +350 F Steel inlet, outlet riser, and hub assembly Reel Series PBGMT with Bottom-Mounted Guidemaster PBGMB Standard outlet is a flanged riser with 1 female NPT threads Accessory items include rollers and roller mounting brackets Alternate brake and locking devices available Handles 1 to 1-1/2 I.D. Hose, Standard Pressures to 350 PSI (24 Bar) HANNAY Non sparking ratchet locks reel Declutching arbor prevents rewind damage Available with channel frames for heavy-duty applications 90 ball bearing swivel joint inlet with 1-1/2 female NPT threads Hose Reel Control Switch Covers Material Performs in temperatures from -40 F to +350 F Standard outlet is a flanged riser with 1 female NPT threads Narrow version available upon request MEP-GMC1 Black EPDM Hose Reel Control Switch Cover for Guidemaster Control Arm MEP-RDC1 Black EPDM Hose Reel Control Switch Cover for Red DOT EPS Hose Reel Control Switch Covers are intended to protect Hannay Hose Reel Control Switches from moisture and/or other contaminants during over-the-road transit. The MEP-GMC1 is specifically designed to fit Hannay Guidemaster control switches while the MEP-RDC1 fits Hannay red DOT EPS style control switches. MEP-GMC1 Series PB800 H Series PBGMB Electric Rewind Series PBGMT with Bottom-Mounted Guidemaster are ideal for open-deck or compartment mounting. Reels are available with #40 chain and sprocket drive powered by an electric, hydraulic or compressed air motor, or direct drive hydraulic rewind motor. Direct drive hydraulic rewind reels are supplied with pinion brakes. Electric powered rewind reels are supplied with a strap brake. Other sizes and/or threads can be furnished and must be specified when ordering as well as the roller position. 90 ball bearing swivel joint inlet with 1-1/2 female NPT threads Standard outlet is a flanged riser with 1 female NPT threads Performs in temperatures -40 F to +350 F Alternate brake and locking devices available Top-mounted guidemaster available Made with durable UV stable black low temperature EPDM material Includes security lanyard to help prevent loss of the cap Control switch can be operated through cover without removing MEP-RDC

77 HOSES & ACCESSORIES HOSES & ACCESSORIES 1 Bobtail Hose Smart-Hose Transfer Assemblies Series 7132 Length Min Bust PSI Cold Weather Flex 1, Cold Weather Flex 1, Cold Weather Flex 1, XTCLAR16MP Flex Low Temp 7132XTCLAR16MP Flex Low Temp 1 Bobtail Delivery Hose, Factory Crimped Ends, Tested and Certified Inside Diameter Working PSI Burst PSI R /2 R R R Smart-Hose Assemblies are designed and engineered with a valve integrated in each end fitting. If the hose assembly experiences a catastrophic hose failure, the Smart-Hose Safety System is designed to instantaneously shut off the flow in both directions. Designed as a passive safety device, the Smart-Hose Safety System needs no human intervention to activate. H Series 7232 Propane Hose Hose I.D. Hose O.D. # of Braids Ft/Reel * / / / / / / / * Estimated - some reels may be different lengths The LP Gas Hose 7132 Series is heavy duty, flexible, and designed for liquid or vapor transfer. The 7132 Series has a black neoprene cover, continuous labeling, and has a maximum recommended working pressure of 350 PSIG. UL Listed Hose is available in cut lengths by the foot, or in reel lengths. Order by inside diameter. The Smart-Hose Safety System is integrated into Petroleum transfer hose assemblies and are designed for use in tank truck and in-plant operations to transfer gasoline, oil, ethanol blends and other petroleum base products up to 50% aromatic content. It is designed for pressure, gravity flow, or full-suction service. Hose cover is synthetic rubber (oil resistant), has a smooth cover with wrapped finish Hose is reinforced - spiral-plied synthetic fabric with wire helix Hose tube is made with Nitrile synthetic rubber RMA Class A (high oil resistant) Hose is efficient in temperatures from -35 F to 200 F Each hose is tested under water with dry air or nitrogen to working and test pressure Each hose is serial numbered Shipped with a test certificate and operating booklet Smart Hose H Crimped On Hose Ends Crimped On Hose End Hose Size Hose End MP04TY 1/4 I.D. 1/4 MNPT FJ04TY 1/4 I.D. 1/4 Female Flare S101HY-6-6 3/8 I.D. 3/8 MNPT S108HY-6-6 3/8 I.D. 3/8 Female Flare MP08TY 1/2 I.D. 1/2 MPT FJ08TY 1/2 I.D. 1/2 Female Flare S101HY /4 I.D. 3/4 MNPT MP16LAR 1 I.D. 1 MNPT S101HY /4 I.D. 1-1/4 MNPT S /2 I.D. 1-1/2 MNPT NP32LA 2 I.D. 2 MNPT Smart Hose Cut-away Views Smart Hose Cut-away Side Views

78 HOSES & ACCESSORIES FLEX CONNECTORS Clamp Style Hose Couplings Stainless Steel Flex Connectors H ME B ME S Hose Barb Outlet MNPT ME /2 1/2 ME /4 3/4 ME S 3/4 1-3/4 F. Acme Steel ME /4 1 ME ME S 1 1-3/4 F. Acme Steel ME /4 ME /4 1 ME /4 1-1/4 ME S 1-1/4 1-3/4 F. Acme Steel ME S 1-1/4 2-1/4 F. Acme Steel ME /2 1-1/2 ME S 1-1/2 2-1/4 F. Acme Steel ME ME B* 2 3-1/4 F. Acme Brass ME S 2 3-1/4 F. Acme Steel * Rated for LP-Gas Marshall s Clamp Style Hose Couplings are user friendly and easy to install in the field. A steel or ductile hose barb is inserted into the hose and two outer clamps, positioned on the outside of the hose, have a boss to keep the bolts from rotating while the clamps compress the hose for a leak free seal. Pipe Size Overall Length No. of Steel Braids /2 MNPT /4 MNPT 16 Single MNPT /4 MNPT /2 MNPT Double MNPT MNPT 22 NOTE: Never use a flexline to correct bad plumbing. Flexline must be kept straight. Do not use on mobile installations - use high pressure Parker rubber hose, with pressed on ends, certified. Braided stainless steel for liquid propane service 350 PSI rated Prevents piping damage from vibration and thermal expansion Schedule 80 ends Custom made flexlines to your specifications The length shown in the chart is the minimum. Maximum length is 36. H NOTE: Clamps must be installed with clamp lip fully engaged into flange groove on hose barb body. Rubber Flex Connectors ME Hose barbs are constructed of zinc plated steel or ductile iron with automotive grade powder coat finish Hose clamps are ductile iron with automotive grade powder coat finish Optional integrated female Acme swivel eliminates weight of additional couplings Includes hose barb, two clamps, nuts and bolts Hose Size Coupling Length Min. Overall Length 1/2 ID 2-7/8 3/4 ID ID 3-1/ /4 ID 4 1-1/2 ID ID 5-1/2 Rubber Flex Connectors are custom made and certified rubber flex connectors. Maximum length available is

79 TURBO-FLO LE DRY BREAK TRANSFER SYSTEM TURBO-FLO LE DRY BREAK TRANSFER SYSTEM Turbo-Flo LE Dry Break Transfer Valves Turbo-Flo LE Acme Adapters H ME ME ME ME ME806S-16 ME ME807S-16 ME ME808A-16 ME808S-16 ME808SA-16 Low Emission Transfer Valve 2 FNPT x 3-1/4 F. Acme Swivel Low Emission Transfer Valve 2 FNPT x 3-1/4 M. Acme Swivel Low Emission Transfer Valve 4 Bolt Type B Flange x 3-1/4 M. Acme Fixed Low Emission Transfer Valve 4 Bolt Type B Flange x 3-1/4 M. Acme Fixed - w/screen Low Emission Transfer Valve 4 Bolt Type B Flange x 3-1/4 M. Acme Fixed Low Emission Transfer Valve 4 Bolt Type B Flange x 3-1/4 M. Acme Fixed - w/screen Discharge at Disconnect.09CC 3.2 CC Material Ductile/Brass Ductile/Steel Ductile/Brass Ductile/Steel Ductile/Brass Ductile/Brass Ductile/Steel Ductile/Steel The Turbo-Flo LE (Low Emission) Transfer System is the industry s most efficient and costeffective way to transfer LP-Gas in bobtail, transport, railcar, and bulk plant applications. This product will pay for itself through gas savings during disconnect and its increased flow rate. While any part of this system is interchangeable with other standard systems, to receive maximum savings, all three products (LE Transfer Valve, LE Acme Adapter, and MEC Globe Valve) must be used simultaneously. The ME807 Turbo-Flo LE Shut-Off Valve is designed for use with LPG and LH3 Tranfer Systems. This system provides a safe, ergonomic and efficient solution to transfer applications while increasing productivity. For use with bobtail, transport, railcar and bulk plant applications. The ME Series Valves feature our new modular Excela-Flange 4-bolt inlet flange design that can be easily adapted to both NTP thread or socket weld type A companion flanges (ME840 and ME841 Series) ranging from 1-1/4 to 2 in diameter making it universal to piping sizes within this range. This innovative system allows installers the ability to eliminate unnecessary connections as well as possible leak points by integrating a convenient 4 bolt flange union at the valve inlet. The Turbo-Flo LE system provides a safe, ergonomic and efficient solution for liquid or vapor transfer applications while increasing productivity and dramatically reducing fugitive product emissions. For use with bobtail, transport, railcar and bulk plant applications. Inlet (M. Acme) Outlet Factory Discharge (MNPT) Installed at Material Screen Disconnect Accessories Mechanical Brake Electronic Back Check Interlock Proximity Test Retro-Fit Interlock Kit Adapter ME /4 1 No.16 CC Brass ME866A-8 1-3/4 1 Yes.16 CC Brass ME /4 1-1/4 No.16 CC Brass ME866A /4 1-1/4 Yes.16 CC Brass ME /4 1-1/4 No 1.96 CC Brass ME867A /4 1-1/4 Yes 1.96 CC Brass ME868-16* 3-1/4 2 No 3.11 CC Brass ME868A-16* 3-1/4 2 Yes 3.11 CC Brass ME868-24* 3-1/4 3 No 3.11 CC Brass ME868MIB ME868PIB MEP105 ME868A-24* 3-1/4 3 Yes 3.11 CC Brass * Not for use in conjunction with soft seat back check To determine payback and cost savings visit ME868BLK Bypass Line Kit creates a one-way closed loop between the up and down stream sides of a Marshall Excelsior 2 globe valve when used in conjunction with a ME868 Series low emission Acme adapter. The Bypass Line Kit features a brass one-way check valve and heavy wall copper tubing with brazed end fittings for durability. The kit prevents over pressurization of the ME868 Series low emission Acme adapters and greatly reduces pressure within the ME868 Series adapters which decreases wear that may occur to the shutoff valves or the low emission Acme adapter. ME868MIB Mechanical Interlock Bracket allows for a standard Parker style pneumatic air roller valve, typically used with standard bobtail brake interlock systems, to be retro-fit to the ME868 Series low emission Acme adapters. This bracket system moves the standard brake interlock system and connections forward to the end of the low emission adapter thus allowing normal contact with the ME441F8 flange Acme cap. All bracketing and mounting hardware are included in the kit however, the Parker style pneumatic roller valve is not included. ME and ME825IBC-16 are to be used with LPG and LH3 Tranfer Systems. This system provides a safe, ergonomic and efficient solution for transfer applications while increasing productivity and dramatically reducing fugitive product emissions. For use with bobtail, transport, railcar and bulk plant applications. ME Patent Pending ME868BLK H ME /4 F. Acme x 2 MNPT Filler Coupling F. Acme MNPT LPG NH3 ME135 Brass Nut/Steel Stem and S.S. Hose Assembly 3-1/4 2 Yes No ME135S Steel Nut/Steel Stem and S.S. Hose Assembly 3-1/4 2 Yes Yes The ME135 Discharge Hose Adapter allows transport hoses to be adapted to work with the ME807 LE Shutoff Valve while providing a flexible connection in the transport trailer hose bleed down lines. It is intended to be used with ME in applications where ME Turbo-Flo LE Valve is not practical due to space or lack of fixed loading or unloading lines. The ME135 allows for normal use of on board passive shutdown hoses and traditional product blow down discharge lines in instances where LE hose end valves are not practical. Acme connection comes fully assembled with an stainless steel hose, fittings, self-closing ball valve and quick disconnect for easy installation. TURBO-FLO LE DRY BREAK TRANSFER SYSTEM Reduces product emissions over 99.6% 100% compatible with all existing acme transfer connections Safety latch prevents accidental valve opening Cam operated vapor equalization feature for smooth valve operation All stainless internal components Factory installed hydrostatic relief valve Low temperature valve seals for maximum performance under all operating conditions Hardend steel bearing race with stainless steel ball bearings (ME806 Series Only) Integrated Back Check (IBC) feature allows trapped liquid to be forced back upstream of the valve if liquid is trapped downstream of the valve seat (ME807 Series Only) Brass or steel acme connections (ME806 and ME807 Series) Designed for bi-directional flow of product Integrated pilot feature allows the ME807 to equalize and open only when connected to ensuring maximum safety Bi-directional flow of product (ME806 and ME807 Series) ME868-16/ ME825IBC-16 NOTE: Quick Disconnect is 3/8 FNPT

80 HOSE END VALVES & ACCESSORIES HOSE END VALVES & ACCESSORIES H MEP105 ME868MIB (ME & ME441F8 not included) Turbo-Flo LE Acme Adapters (continued) The ME868PIB Proximity Interlock Bracket uses the new MEC Smart Interlock Technology which connects with the Allison automatic transmission Auxiliary Function Range Inhibit thus preventing operation of the bobtail while this connection is engaged. MEC s Smart Interlock Technology incorporates a high grade Turck proximity switch that senses the presence of the flange on the ME441F8 Acme cap when secured tightly to the ME868 Series low emission Acme adapter. Mounting hardware and wiring harness that reaches 5 below the deck of the bobtail is included in the kit. The MEP105 Adapter makes possible periodic evacuation and testing of a bobtail s internal back check valve. The adapter fits snuggly into the female Acme side of a ME130 which then can be threaded onto the ME868 Series low emission Acme adapter. The adapter pushes the valve poppet to the open position and depressurizes the system for testing purposes. NOTE: Before using, consult the MEP105 test adapter instruction manual. The GG10-45 is the same nozzle as the GG10 with a 45º dual-axis swivel which allows the driver more flexibility when connecting the nozzle with hard to reach fill points, such as underground tanks or overhead fill points. The dual plane swivel reduces the moment load on the nozzle/fill point. The hose also follows path of least resistance and minimizes the strain and kinking force on the hose after the hose tail. The G11R is used for the containment of leaking fill points during and after each delivery. Gas is released by unscrewing GG10 + GG11 >1 turn. Gas is released through an external screw. The dual spool safety feature to positively seal to fill point even when unit is unwound ¾ of a turn. The safety feature of the GG10 is maintained with the nozzle attached. The nozzle valve will remain closed even when the lever is actuated in an uncoupled position. GG1EHS & GG20HS High strength aluminium alloy Stainless steel components Long service without distortion Nozzle will safely seal with filler valve, even if seal gasket is missing Used with reed switch nozzle boot systems Guided extended ACME 1-3/4 thread minimizes cross-threading and unsafe connections Latching option (not UL approved) GG20HS GG10 H GG10 Light weight and robust design Stainless Steel used throughout, increasing the lifetime of the nozzle Integrated 360 rotating swivel as standard Anodised aluminium parts for protection against salt and dirt contamination Completely repairable Nozzle will safely seal with filler valve, even if seal gasket is missing Long reach to access deeply recessed fill point GG10-45: 45º swivel version of the GG10 ME868PIB Patent Pending GG10-45 G11R Elaflex Nozzles and Valves GASGUARD Flow Rate Release Volume GG1EHS Elaflex Light Duty LPGas Nozzle gal/min 1.7 cm³ 1-3/4 ACME x 6 TPI Form GG20HS Elaflex Light Duty LPGas Nozzle gal/min 1.7 cm³ 1-3/4 ACME x 6 TPI Form Uses an external screw to discharge the release volume Valve will only open when connected to a 1-3/4 ACME fill point Minimal pressure drop GG10 Elaflex High Flow LPGas Nozzle gal/min 11 cm³ 1-3/4 ACME x 6 TPI Form GG10-45 Elaflex High Flow LPGas Nozzle with 45º Dual-axis Swivel gal/min 11 cm³ 1-3/4 ACME x 6 TPI Form G11R Elaflex Safety Back-check Valve 23 cm³ 1-3/4 ACME ZVG 2 EURO UL Elaflex EURO Push-on Connection Autogas Dispenser 13,2 gal./min < 1 cm3 The ZVG 2 EURO UL is the most advanced system is the EURO push-on connection to European Standard EN and UN R 67. Compared to common threaded couplings, EURO connectors incorporate a variety of advantages, such as easy one-handed operation, enhanced safety features and very low gas release upon uncoupling. This nozzle is UL certified. G11R NB-ZVG Elaflex Nozzle Booth Aluminium The GG1EHS has a new hybrid single nose piece and is used for the refueling of light duty/ Autogas vehicles and storage tanks. The GG1 series has outstanding operational performance and low maintenance requirements. This nozzle cannot discharge LPGas to the atmosphere when not coupled and lever is actuated. The Elaflex Nozzle Booth NB-ZVG is made of aluminium, is easy to mount and serves for an optimal fit of the nozzle. A Reed contact switch can be attached to the rear side of the nozzle booth. To establish contact-less on- and off switching of the dispenser, the nozzle is fitted with a block Magnet ( additional product code...m ) in the nozzle guard. ZVG 2 EURO UL Effortless single-handed operation Low weight of 3.1 Lbs. (1.41 kg) including swivel Ergonomic contoured composite lever ZVG 2 EURO UL GG1EHS The GG20HS was designed to reach into, and connect to, deep-seated filler valves, as associated with forklift truck cylinders and RV filler valves in similarly difficult locations The GG10 has been designed to fit to hose reels for dispensing bulk LPGas to small / medium tank and industrial storage facilities. The nozzle is robust and exhibits a high level of operator safety. With the GG10 it is impossible to open the valve and release gas into the atmosphere if the nozzle is not connected to a certified 1-3/4 ACME fill point. The technology within the GG10 removes the possibility of serious injury or the misuse of LPG during the transport and handling phases of refueling. Low hold-open force Durable easy-rotating swivel for improved handling NB-ZVG

81 HOSE END VALVES & ACCESSORIES HOSE END VALVES & ACCESSORIES High Flow & Low Emission Hose End Valves Hose End Valve Holster H ME800G ME800EXTWS ME800 ME800GWS High Flow Model Inlet (FNPT) Outlet (F. Acme) Handle Style Handle Material Factory Installed E-Z Turn Swivel ME800 1 Standard Aluminum No ME /4 Standard Aluminum No ME800WS 1 Standard Aluminum Yes ME800C 1 Standard Composite No ME800CWS 1 Standard Composite Yes ME800G 1 Fluted Aluminum No 1-3/4 ME800G-6 3/4 Fluted Aluminum No ME800GWS 1 Fluted Aluminum Yes ME800GC 1 Fluted Composite No ME800GCWS 1 Fluted Composite Yes ME800EXT 1 Standard Aluminum No ME800EXTWS 1 Standard Aluminum Yes Extended Version No Yes Accessories Holster MEP801 Marshall s High Flow Low Emission Hose End Valves are leading the industry in minimal product loss during disconnect without sacrificing flow. They have instant full-on flow with the added protection of a quick closing, self-locking handle to prevent accidental opening of the valve during transport. They are designed to be used at the end of a filling hose on a bobtail, dispensing system or nurse tank. All stainless steel component construction Molded and riveted on valve main seal Vents less than.50 cc for minimal loss of product at disconnect Self-locking toggle handle prevents accidental valve opening Toggle handle & stem assembly rotate 360 Durable ductile iron valve body with automotive grade powder coat finish Stainless steel 1-3/4 female Acme insert cast into the handle No No additional adapters or connectors needed for operation Optional extended version offers 6 of additional reach for filling underground containers or other hard to reach applications Optional composite style offers a durable lightweight handle that is resistant to frosting and cold transfer during the filling operation Optional factory installed EZTurn stainless steel swivel Fits Accessories MEP801 Bobtail Hose End Valve Holster-Aluminum ME800 Series MEP802 MEP804 Bobtail Hose End Valve Holster-Aluminum with All Weather Hood Bobtail Quick-Jaw Hose End Valve Holster - Aluminum with All Weather Hood Hose End Swivel Connections ME800 Series ME800 Series, AL363 or AL366 (Squibb Taylor) MEP801H (Urethane Weather Hood) MEP (Urethane Holster Strap) MEP801H (Urethane Weather Hood) MEP (Urethane Holster Strap) The Hose End Valve Holster is designed to provide a durable and convenient receptacle to store bobtail hose end delivery valves during over-the-road transit. This holster can be mounted fully above deck or partially below deck in left or right hand hose reel applications with an ergonomic angle providing optimum conditions for delivery personnel. All aluminum and stainless steel construction Urethane anti-vibration valve sleeve to prevent incidental damage to delivery valve Machined adjustment ribs for easy, secure height adjustment Deck backing plate and all mounting hardware supplied Inlet (FNPT) Outlet (MNPT) ME850SS-6 3/4 3/4 ME850SS-6/8 3/4 1 ME850SS ME850SS-8/6 1 3/4 ME850SS-10/8 1-1/4 1 The Hose End Swivel Connector allows the hose end valve to rotate 360 creating an easier connection to the tank filler valve while under pressure. It also promotes hose life by preventing twisting and kinking during reeling and unreeling from hose reel. MEP801H MEP801 MEP804 H Hose End Valve Lock Accessories Fits 2-1/2 Deep Shackle Padlock Keyed Alike Keyed Different ME540 ME800, ME810, ME820 Series ME540P-KA ME540P-KD All stainless steel construction for maximum durability and corrosion resistance Large bearing surface for increased strength and durability 360 rotation under maximum working pressure of 400 PSIG UL Listed seal pack design allows for long life with no maintenance required ME850SS Series Hose End Valve Locks are designed to prevent valve operation while in place, eliminating the possibility of accidental discharge and/or theft of product. Simply slide the lock over the handle/bonnet of the hose end or quick acting dispensing valve. For maximum security a common padlock can be installed. Grounding Stud ME4H 3/8-16 ME540 3/8 diameter through holes for standard 2-1/2 shackle style padlock All stainless steel construction The Grounding Stud is designed to help prevent static electricity from being generated due to friction from the pump. In some cases static electricity can build-up enough to create an ignition source and cause an explosion. ME4H

82 CHOCK BLOCKS & UTILITY BRACKET INTERLOCK TECHNOLOGY Wheel Chock Smart Interlock Technology ME200 Height Length Width ME Marshall Excelsior s Wheel Chocks are designed with a Double Grip handle for easy carrying and dual traction grips for the road and tire. The aluminum material makes the wheel chock lightweight and able to withstand the toughest environments. Turn the wheel chock upside down and the points on top of the wheel chock will dig into the snow, ice and mud to prevent sliding. Durable safety yellow powder coat finish. Wheel Chock Bracket Wheel Accessory H Height Length Depth Chocks Standoff Included Extension Kit ME200B 7-3/ No ME200EXT ME200BK 9-3/ Yes ME200EXT ME200PIB ME200PIBK ME217PIB ME503PIB ME807PIB ME808PIB ME868PIB MEP801PIH MEP802PIH MEP804PIH MEP801PIK MEP- 801PIKL ME890PIB Sensor Bracket Assembly for ME200 Wheel Chocks Sensor Bracket Assembly with ME200 Wheel Chocks Sensor Bracket Assembly for ME217 Series Sensor Bracket Assembly for ME & ME Sensor Bracket Assembly for ME807 Series Sensor Bracket Assembly for ME808 Series Sensor Bracket Assembly for ME868 Valve Series Sensor Assembly with MEP801 Hose End Valve Holster Holster W/Proximity Interlock Sensor Assembly with All Weather Hood Bobtail Quick-Jaw Hose End Valve Holster with Proximity Interlock Sensor Assembly Interlock Retro Fit Kit for MEP801 Hose End Valve Holster Low Temperature Interlock Retro Fit Kit for MEP801 Hose End Valve Holster Universal Sensor Bracket Assembly for Enclosures Temperature Range -20 to +160 F. -50 to +160 F. -20 to +160 F. Accessories ME200EXT (Standoff Extension Kit) MEP801PC/20 (20 Proximity Cable) MEP801PC/30 (30 Proximity Cable) Includes Water Tight Receptacle Plug ME200PIBK MEP801PIH H ME200BK Wheel Chock Brackets are designed to provide a durable and convenient receptacle to store wheel chocks during over-the-road transit. Durable aluminum construction and molded inserts prevent damage to wheel chocks. For installations that require additional mounting clearance a standoff extension kit is available. Universal Utility Bracket ME890PIB ME217PIB MEP801PIK MEP082 Universal Spring Loaded Utility Bracket Smart Interlock Technology Wiring Harness Kits MEP082 Universal Utility Brackets provide a safe and secure method to mount and retain hand tools such as shovels, picks, brooms or other equipment for bobtail or utility vehicles during over the road transit. Cast aluminum body for maximum durability Vinyl coated for maximum security All stainless steel spring and mounting hardware No. of Relays LED Power Indicator Inline Fuse MEP801PCK/20 1 MEP801PCK/ MEP802PCK/20 2* 20 MEP802PCK/30 2* Yes Yes 30 MEP803PCK/30 3** 30 * One additional cable required (MEP801PC/20 or MEP801PC/30) ** Two additional cables required (MEP801PC/20 or MEP801PC/30) Cable Length Accessories 20 MEP801PC/20 (20 Proximity Cable) MEP801PC/30 (30 Proximity Cable) Includes Water Tight Receptacle Plug MEP802PCK/

83 HOSE END ADAPTERS FILLER & VAPOR COUPLINGS Hose End Fill Check Adapters Filler and Vapor Couplings H Filler Valve Hose End F. Acme M. Acme Connection Connection Handle Handle Swivels Factory Extended Additional Style Material Vent Valve Installed Version Keys ME570 No No No ME571 Yes* No No ME571H Standard Brass Yes* No No ME572 Yes No No ME572EXT Yes No Yes ME572EXTHD 1-3/4 1-3/4 Heavy Duty Cast Aluminum Yes No Yes ME574 Standard Brass Yes Yes No ME574EXT Standard Brass Yes Yes Yes ME574EXTHD Heavy Duty Cast Aluminum Yes Yes Yes ME578 Standard Brass Yes No No ME ME578C Heavy Duty Brass Yes No No ME * ME571 and ME571H allows the hose end valve to swivel while connected to the filler hose end adapter ME570 Hose End Fill Check Adapters are intended to be attached to the LP-Gas delivery truck hose outlets. They feature minimal flow restriction which allows for fast delivery while providing an integral check valve to prevent further product loss if the tank fill valve fails to close. In the event the tank fill valve should fail, leave the fill adapter connected to the fill valve and disconnect the filler hose end valve. Then place the filler valve cap onto the fill adapter. The tank fill valve should be repaired immediately. To increase flow up to 30 percent over standard hose end filler adapters use the ME578 hose end fill adapter. It is a full-flow, manually operated hose end fill adapter where the user controls whether the valve is open or closed, providing maximum protection against product discharge. Service Type Liquid Vapor Brass Brass Wing Steel* F. Knurled Wing Nut/Steel Knurled Wing Extended Handle Acme MNPT Nut Nut Nipple Nut Nut Standard Fluted ME /4 3/8 ME /4 1/2 ME110 ME110C ME635-4 ME635G-4 1-3/4 1/2 ME111 ME111C ME111S ME111SC ME635-6 ME635G-6 1-3/4 3/4 ME113SC 1-3/4 3/4 FNPT ME112 ME112C ME112S ME112SC ME635-8 ME635G-8 1-3/4 1 ME ME635G /4 1-1/4 ME120** ME120S** ME121S** ME120WR ME120SWR ME121SWR 2-1/4 1-1/4 ME130** ME130B** ME130S** ME130A*** ME130BWR ME130SWR ME130WR 3-1/4 2 ME /4 3/8 ME141 ME141S ME645G-4 1-1/4 1/2 ME645G-6 1-1/4 3/4 ME646-4 ME646G-4 1-3/4 1/2 ME150 ME150C ME150S ME150SC ME646-6 ME646G-6 1-3/4 3/4 ME151 ME151C ME151S ME151SC ME646-8 ME646G-8 1-3/4 1 ME ME646G /4 1-1/4 ME160 ME160S 2-1/4 1-1/4 *Rated for LP-Gas and NH 3 **Does not include a factory installed retaining ring *** Includes factory installed filter screen Pressure rated for 400 WOG H ME571 ME572 ME571H Integral breakaway feature in the event of truck roll away leaving check intact on tank ME570, ME572, ME574, ME578 shortest overall height in the industry allowing adapters to fit inside tank hood ME571 has a floating internal seat design which allows check to swivel freely when installed on hose end valve ME571H has same features as standard ME571 but with 30% MORE FLOW ME578 has a full-port design which allows for full flow - Removable shutoff key and key ring supplied Extended versions provide an additional 7 for use on underground tanks - Prevents pinching or cutting of the delivery hose on the protective tank collar - Eliminates dangerous extensions that do not incorporate the appropriate fill check device - Eliminates unsafe stacking of multiple fill check adapters to obtain the desirable fill connection height - Overall length allows adapter to fit inside protective tank collar - Optional heavy duty aluminum handle with a stainless steel 1-3/4 female Acme insert cast into the handle Filler and Vapor Couplings are used as connections between the hose and transfer valve. The filler coupling is designed to provide different connections for the end of a hose (inlet) or an angle, globe or quick acting valve (outlet) when transferring liquid. The vapor coupling is designed to be used with valves having an upper check mechanism. The nose piece on the vapor coupling opens the check valve allowing vapor equalization. The extended style has a stainless steel female Acme nut insert cast into the heavy duty aluminum handle. All filler and vapor couplings come with a factory installed retaining ring unless noted. The retaining ring limits the travel of the handle or nut during disconnect reducing spin-offs and promoting proper venting of the captured product. Filler Coupling ME110 Knurled Nut Vapor Coupling ME150 ME574 Wing Nut ME578 ME574EXT ME572EXTHD ME130S ME130A ME635 Series ME635G Series

84 ACME ADAPTERS ACME ADAPTERS Acme Adapters Acme Adapters H ME215S Brass Steel* 1/8 Factory 1/8 M. Acme MNPT FNPT No Screen FNPT Side Port Installed Screen No Screen FNPT Side Port ME498-4/2 1-1/4 1/2 1/4 ** ME498-6/3 1-1/4 3/4 3/8 ** ME520S-8 1-1/4 1 ME521S-4 1-3/4 1/2 ME215 ME215S 1-3/4 3/4 ME216 ME216S 1-3/4 1 ME217 ME217J ME217A ME217S ME217SJ 1-3/4 1-1/4 ME233 ME233J ME233S ME233SJ 2-1/4 1-1/4 ME502-12/8 2-1/4 1-1/2 1 ** ME502-16/10 ME502S-16/10 2-1/ /4 ** ME502-16/12 2-1/ /2 ** ME ME503A-16 ME503S /4 2 ME ME503A /4 2-1/2 ME262 ME262A ME262S 3-1/4 3 * Rated for LP-Gas and NH 3 ** Male thread outside and female thread inside Brass M. Acme FNPT MNPT Steel* No Screen Installed Screen ME498-4/2 1/4 1/2 ** ME498-6/3 3/8 3/4 ** 1-1/4 ME192 1/2 ME193 3/4 ME210 1/4 ME211 3/8 ME /4 1/2 ME213 ME213S 3/4 ME214 ME214S 1 ME502-12/ /2 ** ME502-16/10 ME502S-16/10 2-1/4 1-1/4 2 ** ME502-16/12 1-1/2 2 ** ME250 ME250A 1-1/4 ME251 ME251A 1-1/2 3-1/4 ME ME252A-16 ME252S-16 2 ME ME508A-24 ME508S-24 3 * Rated for LP-Gas and NH 3 ** Male thread outside and female thread inside ME192 ME212 H ME ME209 ME270 Acme Adapter with Screen M Acme M Acme Brass Steel * ME209 ME209S 1-3/4 3/8-16 *Rated for LP-Gas and NH 3 The ME209 Series is designed to hold the hose end valve secure when it is not in use. MEP503 MEP503K Part No. M. M. Brass Steel * Acme Acme ME /4 1-1/4 ME273 ME273S 1-3/4 1-3/4 ME275 ME275S 2-1/4 2-1/4 ME277 ME277S 3-1/4 3-1/4 *Rated for LP-Gas and NH 3 Conical Filter Screen Only for 3-1/4 M Acme Adapters 30 Mesh - Stainless Steel Conical Filter Screen and Retainer for 3-1/4 M Acme Adapters 30 Mesh - Stainless Steel ME503J-16 ME503JB-16 ME503JS-16 Acme Adapters ME252S-16 Brass Steel* M. FNPT/ Factory Machined Factory Installed Factory Factory Machined Factory Factory Installed Acme MNPT 1/4 FNPT Brass Vent Installed Stainless 1/4 FNPT Installed Brass Stainless Steel with Vent Hole Valve Steel Vent Valve with Vent Hole Vent Valve Vent Valve ME252J-16 ME252JB-16 ME252JS-16 ME252SJ-16 ME252SJB-16 ME252SJS /4 2 FNPT ME503J-16 ME503JB-16 ME503JS-16 ME503SJ-16 ME503SJB-16 ME503SJS /4 2 MNPT * Rated for LP-Gas and NH 3 To add a factory installed screen use an A after the prefix number i.e. ME252AJB-16 Pressure rated for 400 WOG MEP503 ME503K ME233S

85 ACME CAPS, PLUGS, & CHAINS ACME CAPS, PLUGS, & CHAINS Acme Caps Acme Caps with Flange Brass Steel* Cap Cap with Cap with Cap Cap with Cap with Only Chain Cable Only Chain Cable F. Acme Style Chain Only** Accessory ME229 ME229-1 ME229S ME229S-1 1-3/4 Pin Hole MEP148 ME229F ME229F-1 ME229F-1C ME229FS ME229FS-1 ME229FS-1C 1-3/4 Knob MEP167 MEP168 ME431F ME431F-1 ME431FS ME431FS-1 2-1/4 Knob MEP167 MEP168 ME431R ME431R-1 2-1/4 Tapped Hole MEP167 MEP168 ME441F ME441F-1 ME441F-1C ME441FS ME441FS-1 ME441FS-1C 3-1/4 Knob MEP167 MEP168 ME441R ME441R-1 ME441RS ME441RS-1 3-1/4 Tapped Hole MEP167 MEP168 *Rated for LP-Gas and NH 3 **MEP147 ring fits over 3/4 MNPT; MEP148 ring fits over 1-1/4 MNPT NOTE: Red and yellow versions available. Cable Only Cap with Flange Accessory Brass Steel* Flange Cap with Cap with Cap with Cap with F. Acme Style Chain Cable Cap Diameter Flange Flange Flange Flange Only Only Only and Chain and Cable and Chain and Cable ME229F5 ME229F5-1 ME229F5-1C ME229FS5 ME229FS5-1 ME229FS5-1C 1-3/4 Knob 5 MEP167 MEP168 ME441F8 ME441F8-1 ME441F8-1C ME441FS8 ME441FS8-1 ME441FS8-1C 3-1/4 Knob 8 MEP167 MEP168 ME441RS ME441R /4 Tapped Hole 8 MEP167 MEP168 *Rated for LP-Gas and NH 3 The Flange allows for easy operation of pneumatic or proximity interlock switches which control the safety systems of transport vehicles. The stainless steel flange is flush mounted to the Acme cap. H Pin Hole Tapped Hole Knob Flange H ME229 ME441RS ME441F-1 Chain Included ME441F8 DISPENSER VALVES & ADAPTERS Quick Acting Dispensing Valves - Series ME810 ME229-EL 1-3/4 F. Acme x 1/2 Male Flare 90 ME441FS-1C Cable Included Angle Globe ME810-4 ME /2 1 ME810-6 ME /4 1 ME810-8 ME *Rated for LP-Gas and NH 3 Accessories Inlet and No. of MNPT x 1-3/4 F. Acme Adapter Outlet Side Ports Short Short Extended Brass Steel* Steel* ME110 ME635-4 ME110C ME635G-4 ME111 ME111S ME635-6 ME111C ME111SC ME635G-6 ME112 ME112S ME635-8 ME112C ME112SC ME635G-8 ME810 Series ME106 ME109-NH3 Accessory Plastic F. Acme Style Chain Cap Only Cap with Chain Only** ME108 ME /4 Pin Hole MEP147 ME109 or ME109-1 or 1-3/4 Pin Hole MEP148 ME109-NH3* ME109-NH3-1* ME106 ME /4 Pin Hole MEP183 *Rated for NH 3 ** MEP147 ring fits over 3/4 MNPT; MEP148 ring fits over 1-1/4 MNPT Dispensing valves are designed to be used at the end of a filling hose for bobtail, dispensing system or nurse tank filling operations. These valves have instant full-on flow with the added protection of a quick closing, self-locking handle to prevent accidental opening of the valve during transport. LV440 AND LV440L SERIES All stainless steel internal components Self-locking toggle handle prevents accidental operation Durable ductile iron valve body with automotive grade powder coat finish Toggle handle and stem assembly rotate 360 Stainless steel factory installed vent valve ME820 Series

86 DISPENSER VALVES & ADAPTERS DISPENSER VALVES & ADAPTERS Quick Acting Dispensing Valves Vapor Service Engine Fuel Valves and Connectors ME821-4 Body Style Inlet & Outlet (FNPT) 1/2 ME /4 Globe ME821B-4** 1/2 ME821B-6** 3/4 No. of Side Ports *Rated for NH 3 ** Includes MEJ400 Brass Vent Valve 2 Accessories MNPT x 1-3/4 F. Acme Adapter Short Brass Short Steel* Extended Steel* ME110 ME635-4 ME110C ME635G-4 ME111 ME111S ME635-6 ME111C ME111SC ME635G-6 ME110 ME635-4 ME110C ME635G-4 ME111 ME111S ME635-6 ME111C ME111SC ME635G-6 ME220FL Moto-Seal Part No. ME220FLSN Inlet Outlet Application 1-1/4 Female Left Hand Acme ME220ML 3/8 FNPT ME790L ME790LSN 1-1/4 Female Left Hand Acme Protective Brass Cap 1/4 FNPT Fuel Line 1-1/4 Female Left Hand Acme Service Valve ME220FLP 1/4 MNPT Filler Valve The CGA 789 Quick Closing Couplings are designed for use with vapor service motor fuel applications. Incorporates all the same features as the standard and Moto-Seal motor fuel filler valves and connectors. The left hand Acme thread allows service on outdoor motor fuel propane equipment including lawn mowers, etc. ME220ML H ME821 Series All stainless steel internal components Reduced size and weight for easier handling Self-locking toggle handle prevents accidental operation Durable ductile iron valve body with automotive grade powder coat finish Toggle handle and stem assembly rotate 360 Factory installed 1/4 FNPT plugged ports Moto-Seal Replaceable Tip (ME ) ME790LSN ME220FLSN H Engine Fuel Filler Valves and Connectors ME220FSN ME220F Moto-Seal Part No. Inlet Outlet Application Protective Brass Cap ME220F ME220FSN 1-1/4 Female Acme 1/4 FNPT Fuel Line ME220M 3/8 FNPT 1-1/4 Female Acme Service Valve ME220FP ME790 ME790SN 1-1/4 Female Acme 1/4 MNPT Filler Valve Knurled body on the fuel line connector and filler valve allows for an easy hand tight connection even under tank pressure Works in conjunction with all mating forklift connectors and filler valves ME220F series has a durable riveted valve stem, chrome plated body and wrench flats for easy installation ME220M has two seals an O-ring to minimize product loss during connection and a gasket to seal the two connectors during filling operations Moto-Seal connector and filler offers - Replaceable tip for maximum service life - Positive seal every time with less than.3 CC product loss at disconnect - 3 layers of security against possible leaks or connection failures when the O-ring and flat gasket are intact on the male connector Quick Acting Toggle Valves Non-Locking Locking Factory Inlet Outlet Installed Vent Valve ME791C ME792C 1/2 FNPT 1/4 FNPT No ME791CJ ME792CJ 1/2 FNPT 1/4 FNPT Yes ME791D ME792D 1/2 FNPT 1/2 FNPT No MD791DJ ME792DJ 1/2 FNPT 1/2 FNPT Yes Quick Acting Toggle Valves are primarily used on cylinder filling operations and industrial applications where quick and precise on/off operation is necessary. NOTE: This valve flows in one direction. Installing the valve in the opposite direction of the arrow may cause the valve to not close properly and/or pump pressure may open the valve. Positive shutoff ME791C Corrosion resistant brass construction One hand operation Optional factory installed vent valve for safe release of captured product ME220M ME790SN ME792C ME791CJ

87 DISPENSER VALVES & ADAPTERS DISPENSER VALVES & ADAPTERS Quick Acting Hose End Valves - High Flow Low Emission POL Filler Couplings & Adapters H 1/2 High Flow Low Emission Quick Acting Hose End Valves Propane Flow Propane PSIG Inlet Outlet Pressure Pressure Differential Differential ME777-4 Male SN POL Filler Valve Handle Style Handle Material M. POL Spin on Brass ME778-4 Female QCC (Type I) Filler Valve F. QCC Spin on Brass 1/2 ME779N-4 Female QCC Quick Connect Filler Valve FNPT F. QCC Quick Connect Composite Heavy Duty Female QCC Quick ME779-4 F. QCC Quick Connect Aluminum Connect Filler Valve 3/4 High Flow Low Emission Quick Acting Hose End Valves Propane Flow Propane PSIG Inlet Outlet Pressure Pressure Differential Differential ME777-6 Male SN POL Filler Valve Handle Style Handle Material M. POL Spin on Brass ME778-6 Female QCC (Type I) Filler Valve F. QCC Spin on Brass 3/4 ME779N-6 Female QCC Quick Connect Filler Valve FNPT F. QCC Quick Connect Composite Heavy Duty Female QCC Quick ME779-6 F. QCC Quick Connect Aluminum Connect Filler Valve Accessories ME850SS-6 POL Filler Couplings Inlet Outlet Handle Style Body/Nipple Material OAL ME388 1/4 MNPT Male Soft Nose POL Knurled - 2 Dia. Bass/Brass 2-11/16 ME390 1/4 MNPT Male Soft Nose POL Heavy Duty Forged Bass/Brass 6 ME390S 1/4 MNPT Male Soft Nose POL Heavy Duty Forged Brass/Stainless Steel 6 Adapters Inlet Outlet Handle Style Converts POL Filler Coupling to ME392 Female POL 1-5/16 Female Acme Knurled Type I (QCC) Filler Coupling ME393-2 Female POL 1-5/16 Male Acme Male Type II / Quick Fill Connector ME /16 Male Acme/Female POL 1-1/4 Female Acme Knurled Motor Fuel Filler Coupling ME568 Female POL 1-3/4 Female Acme Knurled Tank Filler Coupling * Replacement M. QCC/F. POL gasket - Part No. MEW3 These POL Filler Couplings make filling DOT propane cylinders with a POL connection quick and easy. A few turns allow the soft nose POL to seal and unseal from the mating POL connection with minimal effort and loss of product. The long body models allow the filler coupling handle to remain outside the fixed collar of the cylinder. Can be used on manual, electric or hydraulic system. In a manual system a shutoff valve (ME791C, ME791CJ, ME792C or ME792CJ) should be used with the filler coupling. ME390 Coupling ME388 Coupling H ME777-4 L.E. Quick Acting M. POL x 1/2 FNPT Inlet These Quick Acting Hose End Valves are leading the industry in minimal product loss during disconnect without sacrificing flow. They have instant full-on flow with the added protection of a quick closing, self-locking handle to prevent accidental opening of the valve during handling or storage. They are designed to be used at the end of a filling hose on dispensing systems equipped for filling containers with QCC Type I OPD or F. POL type valves. All stainless steel internal component construction Molded then retained and captured for field repair-ability on valve main seal Vents less than.04 cc for minimal loss of product at disconnect Self-locking toggle handle prevents accidental valve opening Toggle handle and stem assembly rotate 360 for maximum ergonomic flexibility and comfort Available in Male POL and Female Type I/QCC fill connections Type I F. QCC features composite quick connect option for easy on/off and reduced repetitive motion These Adapters allow for quick conversion from a POL connection to various filling applications for retailers who fill multiple cylinder types through the same Type I (QCC) connection. Simply hand tighten the adapter to the POL filler connection (ME388 or ME390 Series). The ME393-2 allows for quick conversion from M. QCC (ME516) or F. POL (ME390) Fill Adapter to a Male Type II/Quick Fill Connector. ME392 Adapter ME394 Adapter ME393-2 Adapter ME390S Coupling ME568 Adapter ME778-4 L.E. Quick Acting F. QCC x 1/2 FNPT Inlet ME779N-4 L.E. Quick Connect Filler F. QCC x 1/2 FNPT Inlet ME777 M. POL ME778 F. QCC ME779N F. QCC Quick Connect Filler

88 ENGINE FUEL BULKHEADS & CARB FITTINGS FILLER COUPLINGS & ADAPTERS Engine Fuel Bulkheads Type I (QCC) Filler Couplings and Adapters Connection Connection MET443 3/8 Male Flare 1/4 FNPT (2 Ports) MET444 3/4-16 Male / 1/4 FNPT 1/4 FNPT (2 Ports) MET445 3/4-16 Male / 1/4 FNPT 1/4 FNPT (3 Ports) Inlet Outlet Handle Style Body/Nipple Material ME515 Knurled Brass/Brass 7 ME516 1/4 MNPT 1-5/16 Female Acme Heavy Duty Forged Brass/Brass 6 ME516S Heavy Duty Forged Brass/Stainless Steel 6 OAL ME516S H MET443 ME709 MET444 Marshall Excelsior s Engine Fuel Bulkheads provide a stationary point for motor fuel lines to pass thru sections of sheet metal. Carburetion Filter and Fittings Inlet Outlet Side Port ME709 1/4 FNPT 1/4 MNPT ME229-EL 1-3/4 F. Acme 1/2 Male Flare ME8346 5/16 ID 3/8 Female Flare 1/4 FNPT The Gas/Air Filter is used to filter foreign materials and/or particles from LP-Gas systems such as motor fuel/carburetion systems. Also designed to be used to filter air supply lines for internal and emergency shutoff valve actuator systems. Carburetion Hose Fitting ME8346 enables the installation of a 1/4 MNPT hydrostatic relief valve in a safe, protected area. This two-piece carburetion hose fitting fits all stainless steel braided LP-Gas hose with a 5/16 ID. The tank valve side has a 3/8 female flare swivel and zinc plated for maximum corrosion resistance. These full size Type I (QCC) Filler Couplings make filling DOT propane cylinders with a QCC connection quick and easy. Just a few turns allows the filler to attach and remove the coupling with minimal effort and loss of product. A longer body allows the filler coupling handle to remain outside the fixed collar of a cylinder. Can be used on a manual, electric or hydraulic system. In a manual system a shutoff valve (ME791C, ME791CJ, ME792C or ME792CJ) should be used with the filler coupling. WARNING: It is illegal to fill a 40 lb. or less DOT propane cylinder that has a standard POL connection. Inlet Outlet Handle Style Converts Type 1 (QCC) Filler Coupling to ME393 Male Soft Nose POL Knurled POL Filler Coupling ME393HD Male Soft Nose POL Heavy Duty Forged POL Filler Coupling 1-5/16 Male Acme/Female POL ME /4 Female Acme Knurled Motor Fuel Filler Coupling ME /4 Female Acme Knurled Tank Filler Coupling The Type I (QCC) Thread replaces the POL connection on 40 lb. or less DOT propane cylinders. Marshall Excelsior has developed numerous adapters to allow quick conversion from Type I (QCC) to different fill applications for retailers who fill both 40 lb. or less and larger propane cylinders through the same line. Simply hand tighten the adapter to the Type I (QCC) filler coupling (ME515 or ME516 Series). ME515 H ME229-EL 90 Angle ME8346 Marshall s Fitting ME229-EL allows connection of a motor fuel service line from 1-3/4 female Acme vapor outlet. ME569 Type I (QCC) Quick Filler Coupling Inlet Outlet ME796 1/4 MNPT 1-5/16 Female Acme Quick Connect NOTE: A quick closing shutoff valve must be used with this coupling. Type I (QCC) Quick Filler Coupling Type I (QCC) Quick Filler Coupling designed to provide a fast, reliable connection for filling cylinders with Type I (QCC) style valves. The snap on/snap off design is intended to reduce labor and repetitive motion associated with threaded type filler couplings. This easy to operate filler coupling is durable, lightweight and will withstand the harshest working conditions while reducing cylinder valve thread wear. ME393 ME393HD ME394 (ME791CJ Not Included) Durable glass filled nylon handle Easy snap on/off action for quick fill operation All stainless steel internal components Large bore stainless steel stem for increased flow Right or left hand operation Universal filler connection for all Type I (QCC) service valves

89 LPG FILLING HEADS BREAKAWAY COUPLINGS Kosan LPG Filling Heads CAVAGNA GROUP Breakaway Couplings H Inlet Connection Outlet Connection 129A001 LPG 1/4 Air 3/8 NPT Standard Handwheel Valve, Male Thread Without SRV 129A002 Refrigerant 1/4 NPT - Air 3/8 NPT Standard Handwheel Valve, Male Thread, With and Without SRV 129A003* LPG 1/4 NPT Air 3/8 NPT Standard Handwheel Valve, POL Outlet, Female POL Thread Valves With and Without SRV 129A006 LPG 1/4 NPT Air 3/8 NPT Omeca Coupling, A009 LPG 1/4 Air 3/8 OPD - Female POL Thread Valve with Check-Lock With and Without SRV *Left hand version is available Cavagna Group s Filling Heads are made of corrosion-resistant materials such as stainless steel, brass, aluminum and special polymers. The rubber materials are developed and manufactured according to the requirements of EN 549 as well as Kosan s own strict specifications. The Cavagna Group quality control system carries as minimum an ISO 9001 certification and is continuously assessed by QCB. Filling Head Connection OAL Accessory Bracket Style Lanyard Style FNPT Length Reassembly Tool ME860S-6 ME861S-6 3/4 6 MEP128-6 ME860S-8 ME861S /4 ME860S-10 ME861S /4 7-3/4 Breakaway Couplings are designed to provide a safe way to transfer LP-Gas and NH 3 without sacrificing flow. The FloKill TM Breakaway Coupling flows both directions and protects against expensive loss of product or equipment damage if a pull-away occurs during a transfer operation. One end of the breakaway coupling should be attached to a fixed or sturdy point. In the event of an excessive amount of pull force, the breakaway coupling will separate and immediately shutoff product flow in both directions. To reconnect the valve, pressure needs to be relieved from both ends of the line, therefore it is recommended that a safe way to bleed down the line is provided upstream and downstream. After the lines have been depressurized use Marshall Excelsior s re-installation tool (MEP128-6) for 3/4 or slide the male end into the female side and pull the collar back until they lock. After reconnection the line must be tested using Marshall Excelsior Leak Detector to check for leaks before any product is transferred. The breakaway coupling may be used on vapor or liquid lines on transports, delivery trucks, motor fuel containers, fill cabinets and other miscellaneous filling operations. H NOTE: It is recommended that breakaway couplings be safety tested monthly to confirm that proper separation occurs in the event of a pull-away. Dry air is suggested for a source of pressure during testing. Nitrile soft seat provides positive shutoff both upstream and downstream of source lb. of force required for disconnect Approximately 100 lb. of force to reconnect Large internal bore for increased flow Durable plated steel construction Rated for LP-Gas and NH 3 ME860S-6 ME861S-6 MEP128-6 Coupling Not Included

90 AUTOGAS DISPENSERS FUEL MANAGEMENT EQUIPMENT Autogas Dispensers LPG Control Panels P4-100 Single Hose Dispenser for Meters and Fuel Management Systems P4-150 Dual Product Dispenser for Meters and Fuel Management Systems P4-200 Dual Hose Dispenser for Meters and Fuel Management Systems P4-SECP-E P4-SECP VFD P4-SECP Economy Series Integrated Station Control Panel Fully Integrated Station Control Panel Single and Three Phase Full Control Panels H P4-100 P4-150 All P4 Dispensers are full retail capable autogas dispensers designed to be used with cylinder and/or Gasguard fill nozzles. The P4 Series is functional, durable and fully NETP certified for installation with NTEP approved meters and fuel management systems. The dispensers are skid mountable to most dispensing skid systems as well as island mountable for multi-dispenser fuel islands, with or without pit. The P4 Series can be mounted within 5 of other product dispensers in accordance with NFPA 58 for low emissions dispensers. They can also be mounted remotely from the pump for remote fueling points and mounted with third party fuel management pedestals. Electronic display, fully NCWM retail approved Push-to-Start / Stop button Illuminated On button Electronic calibration and totalizer Automatic electronic temperature compensation METER OPTIONS: Liqua-Tech LPM102, Neptune 4DMD, or Liquid Controls MA4 Optional 2 receipt printer, 3 roll Dual product pricing or 5 level pricing Pre-wired for connection to most card reader systems Solenoid flow control for accuracy and theft prevention Built in accordance with UL 495 / 1238, and NFPA 58 / 30A Optional integrated Motor-starter with overload protection Optional upgrade to proprietary P4-ParaFUEL fuel management system The P4-SECP-E integrates all the electrical control elements into a single panel mount box and is designed specifically for filling small bottles or single/dual hose autogas dispensers. This unit is available in single or three phase, from hp, and has a mounting size of 12 x 9 x 9. The P4-SECP requires a properly rated circuit breaker in the supply panel (20-30 amps). The P4-SECP is a single panel mount box designed for running larger autogas fleets and retail stations with 2 or more dispensers and 1 pump with 5-7.5hp three phase motors. Base models have a mounting size of 41 x 24 x 12. The VFD gives the additional benefit of soft starts with programmable ramp up, contributing to longer pump and motor life. The dispenser isolation relays to protect dispensers from back feed voltage. The P4-SECP also has a single panel mount box and is capable of single or 3 phase service (from 5-10 hp), 120/230/240 and 480 vac. It is designed for running large autogas fleets and retail stations with 2 or more dispensers and 1-3 pumps. Mounting size is 20 x 16 x 10. P4-SECP-E and P4-SECP models have a NEMA 4X fiberglass enclosure. P4-SECP have NEMA 4/12 metal exterior enclosure Galvanized back plane with DIN rail mounted components for easy connections Motor starter/disconnect with current limit integrated Manual reset on overload protection Through door disconnect Hooded emergency stop button, breaks all power to the station when depressed Optional HOA switch for manual over-ride testing 1-10 second delay in motor start to delay pump start when opening internal valves 6 Amp breaker for dispenser Optional auxiliary 6 Amp breaker for third party card readers Optional LED Pilot light for run indication All connection points labeled Satisfies all NFPA and NEC requirements for single point station electrical integration Can be prewired and assembled to individual station specifications Units built to order based on site specifications P4-SECP-E P4-SECP VFD P4-SECP-E H Internal Valve System P4-ECO Air Internal Valve System for Tanks The P4-Eco-Air Internal Valve System is designed for the rigors of propane internal valve operation and is safer, less costly, and better for the environment than gas or nitrogen systems. P4-200 Industrial grade compressor - oil free and maintenance free Vertical 2 gallon reservoir, with self-drain solenoid, PLC controlled Heavy duty regulator and filter with auto drain Computerized controls and pressure sensors Continues to operate with Small Leak Detection after warning light Automatic shut-down with Major Leak Detection and flashing warning indicator P4-ECO

91 AUTOGAS ACCESSORIES THERMOMETERS & GAUGES LPG/NH 3 High Capacity Dispensing Filter Container Thermometers H ME680 ME680-8-ERK ME680-8 Replacement Filter Elememt ME206 ME709 Inlet Outlet Filter Element Flow Rate * ME680-8 High Capacity Dispensing Filter 1 FNPT 1 FNPT 20 micron 35 GPM/LPG ME204 ME709 Inline Filters 1/4 MNPTx1/4 FNPT Brass Gauge Dampener/Filter 1/4 FNPT x 1/4 MNPT Inline Fuel Filter The new ME680 LPG/NH3 Dispenser Filter is designed to remove 99.9% of solid contaminants. These contaminants can be introduced into the system during the refining process from holding tanks as well as the delivery trucks used to transport the liquid fuel. This filter is used to protect critical engine components such as fuel injectors on propane powered vehicles which include: shuttle buses, delivery trucks and vans, taxi cabs, lift trucks, as well as turf maintenance vehicles. The filter housing is constructed from high strength forged aluminum. The entire housing is powder coated for long term outdoor use. There are two internal primary seals inside the filter element used to prevent contaminants from entering into the downstream. There is a 1 hex nut located on the bottom of the bowl for easy removal and maintenance. The element is constructed of pleated micro glass media, reinforced with an epoxy coated wire for added strength and corrosion resistance. This pleated element design offers a higher contaminant-loading capacity and offers a lower pressure drop than other standard elements. The element also has a pleated steel inner retainer for additional strength and durability. High-grade forged aluminum body construction Durable powder coated exterior 5/16-18 UNC tapped mounting holes for easy installation 1 hex nut on bottom of bowl for easy maintenance Pleated element offers higher contaminant loading capacity and lower pressure drop SPECIFICATIONS: Port Size: 1 NPT Max Pressure: 350 PSIG Max. Temp: 175 F (79 C) Head Material: Aluminum Internal Components: Stainless Steel Bowl: Aluminum Seals: Nitrile Weight: 5.5 lbs Length: 8.07 Width: PSI pressure differential Removes solid contaminants from LPG/ NH 3 (20 micron rated element) 1 FNPT inlet/outlet connections 350 PSI maximum pressure 1/4 FNPT plugged ports both upstream and downstream of the filter element Dial Diameter Probe Length MEJ MEJ MEJ MEJ These thermometers are designed for use in LP-Gas or NH 3 storage tanks, nurse tanks, bobtails and transports. These stainless steel, dust and water proof thermometers feature a 1/2 MNPT connection with a temperature range from 40 to +120 Fahrenheit. Accuracy +/- 1 percent full range. Pressure Gauges 1/4 MNPT Bottom Mount 1/4 MNPT Back Mount PSIG Dial Size Fill Type MEJ /2 Dry MEJ500 MEJ Dry MEJ603LP-01* /2 Glycerin MEJ501 MEJ Dry ME10BTK /2 Glycerin ME50ECO WC 2-1/2 Dry MEJ502 MEJ Dry MEJ503 MEJ Dry MEJ Dry MEJ Dry MEJ MEJ Dry MEJ603HP-01* /2 Glycerin MEJ580*** Dry MEJ542** /2 Glycerin MEJ524* /2 Glycerin MEJ552* MEJ526** /2 Glycerin *Brass Pipe Thread; Stainless Steel Bezel ** Stainless Steel Gauge *** Plated Steel Gauge These Pressure Gauges are designed to measure the pressure of gas or liquid. Marshall Excelsior offers two types of gauges, dry and glycerin filled. With a glycerin filled gauge, the life of the gauge is extended, vibration of the pointer is minimized and condensation, caused by humid air inside the gauge, is eliminated. To determine the correct gauge, environment along with normal operating system pressure must be considered. The pressure range of the gauge should be twice the normal system pressure to maximize gauge life and accuracy. Pressure Gauge Protective Boot MEJ2.5GB Fits 2-1/2 Dial, Bottom Mount Pressure Gauge MEJ701 Back Mount Bottom Mount Protective Boot MEJ502 MEJ513 MEJ542 H The Protective Boot fits over the pressure gauge dial to extend the life and accuracy of dry and liquid pressure gauges. This boot helps protect the dry pressure gauge s internal components and helps prevent dents on liquid pressure gauges which cause the gauge to leak. MEJ

92 QCC CAPS, ADAPTERS, & CONNECTORS QCC CAPS, ADAPTERS, & CONNECTORS Type I (QCC)/OPD Valve Cap Gas Box Convenience Outlet ME392P ME392P installed on 20 lb. cylinder Brass Black Vinyl ME392P Fits ME /16 Female Acme Type I (QCC) / OPD Valve Cap is designed to protect the 1-5/16 male Acme threads on Type I (QCC) or OPD type cylinder valves. Using a cap will reduce the likelihood of inadvertent damage to the valve s threads, shutoff mechanisms and sealing surfaces during storage or refurbishment. Color Black Gray Ivory Inlet Outlet No. of Color Outlets ME951BLK ME951GRY ME951IVY 1/2 FNPT 1-5/16 Male Acme/Female POL Single ME952BLK ME952GRY ME952IVY 1/2 FNPT 1-5/16 Male Acme/Female POL Dual Accessories MER = 60 Extension Hose MER = 120 Extension Hose (Male QCC/Female POL x Female QCC) MER = 60 Extension Hose MER = 120 Extension Hose (Male QCC/Female POL x Red Female QCC-400,000 BTU/H) H Type I (QCC) Connector Outlet Inlet Flow Capacity 1/4 MNPT 1/4 Hose Barb 3/8 Hose Barb Inlet Flow Capacity Handwheel Color Thermal Protection Handwheel Color Thermal Protection ME517 ME517-25H ME517-38H 1-5/16 Female Acme 50 SCFH Air/100,000 BTUH Black Yes ME518 ME518-25H ME518-38H 1-5/16 Female Acme 100 SCFH Air/200,000 BTUH Green Yes ME519 ME519-25H ME519-38H 1-5/16 Female Acme 200 SCFH Air/400,000 BTUH Red Yes ME517 ME ME518-25H ME517EV 1-5/16 Female Acme Full Flow Black Yes Evacuation Coupling The Type I (QCC) Connectors ( ME517, ME518 and ME519 Series) are designed with a built-in excess flow feature and a positive shutoff that will not allow gas to flow until the connector is fully engaged. In case of a fire the built-in thermal protection on the QCC connector melts allowing the nipple to disengage from the tank connection and stop the flow of propane. These QCC connectors also provide a positive back check seal at disconnect to eliminate the propane in the hose from being released into the atmosphere. To connect a Type I (QCC) connector to a cylinder, close the cylinder valve and the control valves to all connected appliances. Hand tighten the QCC onto the cylinder and slowly open the cylinder valve. If the valve is opened too quickly, the excess flow device will be activated closing the flow of propane to the appliance. If the excess flow device is activated, close appliance control valves and wait 60 seconds to allow pressure in the line to equalize. Additional equalization time may be needed depending on the length of the hose. Turn on appliances by following the manufacturer s suggested lighting procedures. MEC s Gas Box Convenience Outlet are designed to eliminate the need for a 20 LB cylinder or modifications generally needed to plumb an outdoor appliance to a DOT or ASME stationary tank. The Gas Box utilizes the standard LP-Gas outdoor appliance regulator and connector. Simply hard plumb a gas line from the first stage regulator into the Gas Box. Then thread the standard Type I (QCC) or POL connector onto the Gas Box, turn on the shutoff valve and enjoy continuous LP-Gas flow. Both models provide full capacity operation at 10 PSIG or higher inlet pressures for all outdoor appliances without modifications. The Gas Box is an easy way to guarantee increased propane sales. It eliminates the need for 20 pound cylinders, allowing the customer to purchase any appliance without modifications. Universal Type I (QCC) / female POL outlet connection Primary shutoff valve for each outlet connection Secondary safety shutoff poppet at each outlet for zero discharge at disconnect For use with PSIG inlet pressure Universal mounting hardware Hinged cover with latching mechanism Weather resistant high density polyethylene case FLOW RATE/CAPACITY SPECIFICATIONS: Model ME951 Single outlet* 750,000 BTU/HR 100 PSIG inlet pressure / Outlet in. W.C. (11 nom.) 450,000 BTU/HR 10 PSIG inlet pressure / Outlet in. W.C. (11 nom.) Model ME952 Dual outlet * One outlet closed 750,000 BTU/HR 100 PSIG inlet pressure / Outlet in. W.C. (11 nom.) 450,000 BTU/HR 10 PSIG inlet pressure / Outlet in. W.C. (11 nom.) Both outlets open (at each outlet) 750,000 BTU/HR 100 PSIG inlet pressure / Outlet in. W.C. (11 nom.) 325,000 BTU/HR 10 PSIG inlet pressure / Outlet in. W.C. (11 nom.) ME951BLK ME952GRY ME952IVY H ME519 NOTE: The Type I (QCC) thread replaces the POL connection on 40 pound or less DOT propane cylinders. WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. ME517EV MER

93 QCC CAPS, ADAPTERS, & CONNECTORS QCC CAPS, ADAPTERS, & CONNECTORS Low Pressure Quick Disconnect Couplings Type I (QCC) Installation Adapters H ME-GMCL4 ME-GMC4 ME-GMC4 ME-GMCL-4 ME-GMC4-02 ME-GMC4-03 ME-GMC6 ME-RVSDC-4 Quick Disconnect Assy - 1/4 FNPT x 1/4 MNPT Nipple 1/4 Quick Disconnect Ball Valve Coupler - 1/4 FNPT with Dust Cap 1/4 Quick Disconnect Nipple x 1/4 MNPT Adapter 1/4 Quick Disconnect Nipple x 1/4 Hose Barb Adapter 3/8 Quick Disconnect Assembly - 3/8 FNPT Coupler x 3/8 FNPT Nipple Replacement Dust Cap - 1/4 QD Coupler with Lanyard The Low Pressure Quick Disconnect Couplings are designed to provide convenient quick connect and disconnect for low pressure gas appliances with 100% positive gas shut off at female coupler end of the connection. Maximum operating pressure 1/2 PSIG. Convenient wrench flats for securing connection points One piece coupler body Durable all brass construction Approved for all low pressure gas applications For indoor and outdoor applications Packaged Inlet Outlet Shutoff Device ME /4 FNPT 1-5/16 Male Acme/Female POL ME393EX 1/4 FNPT 1-5/16 Male Acme/Female POL.9 GPM Excess Flow* ME393EX1.8 1/4 FNPT 1-5/16 Male Acme/Female POL 1.8 GPM Excess Flow* ME398 ME398P** Male Soft Nose POL 1-5/16 Male Acme/Female POL Quick Closing ME399 1/4 MNPT 1-5/16 Male Acme/Female POL Quick Closing *An excess flow device does not provide a 100% shutoff, a small amount of propane may leak if disconnected ** Packaged option consists of a plastic clamshell Type I (QCC) Installation Adapters provide a safe permanent outlet when installed into the household LP-Gas system. This permanent outlet eliminates the need for smaller containers when operating outdoor LP-Gas equipment. It is recommended that a shutoff valve be installed upstream from the adapter inlet to facilitate future servicing. The adapters can be used with both Type I (QCC) and male POL connections. ME398 and ME399 include an internal shutoff valve which provides a leak free means for outdoor equipment to be safely connected and disconnected without shutting down the entire system. NOTE: To use the female POL on the ME393 series, simply remove the internal gasket. The gasket must be in place to use the Type I (QCC) connection. H ME-GMC6 ME-306 CGA 555 Fittings Inlet Outlet ME306 Female CGA 555 1/4 MNPT ME307 Female CGA 555 9/16-18 Male Left Hand ME308 Female CGA 555 Female POL WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. ME398P Cap with Chain ME309-1 CGA 555 The CGA 555 Adapters are standard cylinder valve outlet connections for liquid butane or propane withdrawal. They are designed to withstand pressures up to 3,000 PSIG. ME399 ME393-1 ME-308 ME

94 POL ADAPTERS POL ADAPTERS Male POL x 1/4 MNPT Single Piece POL Adapters I Male Hard Nose POL Male Soft Nose POL Plastic Handwheel Male Hard Nose POL Male Hard Nose POL 90 Angle Male Soft Connection Male POL Nose POL ME318, ME318P* ME345 ME1629 7/8 Nut ME322 7/8 Nut, 3-1/2 OAL ME1654 Plastic Handwheel ME1654AH Hex Handwheel ME1654AR Round Handwheel ME319 ME /8 Nut ME1690, ME1690P* ME1641 1/4 MNPT.9 GPM Excess Flow, 7/8 Nut ME GPM Excess Flow, Plastic Handwheel ME1653AH.9 GPM Excess Flow, Hex Handwheel ME1653AR.9 GPM Excess Flow, Round Handwheel ME GPM Excess Flow, 1-1/8 Nut ME1690-EX18 ME1641EX GPM Excess Flow, 7/8 Nut ME1638 #60 Orifice Hole, 7/8 Nut *Packaged option consists of a plastic clamshell ME345 POL x Male Flare POL Excess Male Connection Flow Flare ME353 Male Hard Nose 3/8 ME353-SN Male Soft Nose 3/8 ME353EX9.9 GPM 3/8 ME353EX18 Male Hard Nose 1.8 GPM 3/8 ME355 1/2 ME355-SN Male Soft Nose 1/2 ME355EX9.9 GPM 1/2 ME355EX18 Male Hard Nose 1.8 GPM 1/2 ME356 5/8 ME356-SN Male Soft Nose 5/8 ME356EX9.9 GPM 5/8 Male Hard Nose ME356EX GPM 5/8 POL x FNPT POL Connection FNPT ME300 1/8 ME301 1/4 ME302 Female 3/8 ME303 1/2 ME304 3/4 ME351 Male Hard Nose 1/4 ME357 1/2 POL x MNPT POL Excess Male Connection Flow Flare ME284 1/4 ME285 3/8 Female ME286 1/2 ME287 3/4 ME352 3/8 ME354 1/2 Male Hard Nose ME354EX9.9 GPM 1/2 ME354EX GPM 1/2 ME285 ME353EX18 I Hex Handwheel Round Handwheel Male POL x Hose Barbs Male Hard Nose POL Male Hard Nose POL Hose I.D. Male POL 90 Angle ME5930 ME N 1/4 7/8 Nut ME N ME SN 3/8 7/8 Nut ME N ME N 1/4 1-1/8 Nut ME5931 ME5931-SN 3/8 1-1/8 Nut ME1656 1/4 Plastic Handwheel ME1656AH 1/4 Hex Handwheel ME1656AR 1/4 Round Handwheel ME1683 ME N 1/4.9 GPM Excess Flow, 7/8 Nut ME5931EX-78N ME5931SNEX-78N 3/8.9 GPM Excess Flow, 7/8 Nut ME1684 1/4.9 GPM Excess Flow, 1-1/8 Nut ME1655 1/4.9 GPM Excess Flow, Plastic Handwheel ME1655AH 1/4.9 GPM Excess Flow, Hex Handwheel ME1655AR 1/4.9 GPM Excess Flow, Round Handwheel ME1655EX18-78N 1/4 1.8 GPM Excess Flow, 7/8 Nut ME1657 1/4 #60 Orifice Hole, 7/8 Nut POL x MNPT POL Connection POL Connection ME305 Female Female WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. POL Cap and Plugs Brass Plastic Style Body Only Body With Chain Body Only ME1691 ME ME970P Male Hard Nose POL Plug ME1699 Female POL Cap ME353 ME1699 ME303 ME1691 WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. ME970P

95 POL ADAPTERS POL ADAPTERS POL Thread Clean Out Tool Multiple Cylinder Tee Block Manifolds POL Thread Clean Out Tool is designed for use with any female POL thread or valve inlet opening. Allows operator to safely remove debris and other foreign material from female NGO left hand threads (female POL) without damaging threads. Simply thread clean out tool into female POL threads using handwheel until the tool reaches the final thread. Reverse and remove tool carefully. Reverse tool and use attached 7/8 diameter bottle brush to perform final clean out operation. Blow out any remaining debris by using a compressed air line. Constructed from hardened tool steel and plated for maximum product life Four clearance flutes to allow debris to be channeled away from threads Convenient 7/8 diameter wire brush for final clean out Inlet Inlet Outlet Nut Size ME1701 Female POL Female POL 1/4 FNPT ME1701B Female POL Female POL Male Hard Nose POL 7/8 ME1702B Female POL Female POL Male Hard Nose POL 1-1/8 ME1701B-SN Female POL Female POL Male Hard Nose POL 7/8 ME1701X Female POL Female POL Male.9 GPM Excess Flow Hard Nose POL 7/8 ME1701B-X-SN Female POL Female POL Male.9 GPM Excess Flow Hard Nose POL 7/8 ME1704B Female POL Female POL Female POL 1-1/8 ME1700B 1/4 Female 1/4 Female Inverted Flare Inverted Flare 1/4 MNPT ME-T /4 FNPT 1/4 FNPT 1/4 MNPT ME1701B MEP100 WARNING: The POL thread clean out tool is strictly intended for use as a cleaning device and in no way should be used as a gauge to determine the usability of the thread. (Always refer to NFPA 58 and follow the appropriate guidelines prior to installing LP-Gas lines). These Manifolds are designed to connect multiple cylinders to automatic changeover regulators. These manifolds have no check and are primarily for systems requiring more than one cylinder to be in operation at a time. The appropriate pigtail must be used to connect the manifold inlet to the service cylinder valve. I MEP456A Tee Check Manifolds Packaged Part No. Inlet Inlet Outlet Nut Size ME1701A Female POL Female POL Male Hard Nose POL 7/8 ME1702A Female POL Female POL Male Hard Nose POL 1-1/8 ME1705A Female POL Female POL 1/4 MNPT ME1700A ME1700A-P** 1/4 Female 1/4 Female Inverted Flare Inverted Flare 1/4 MNPT MEP456A* 1/4 Female 1/4 Female Inverted Flare Inverted Flare 1/4 MNPT * Manual change over ** Packaged option consists of a plastic clamshell WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. ME1704B I The Tee Check Manifolds are designed to connect two cylinders. The check keeps the two tanks equalized and allows each tank to be changed without disrupting the flow of propane to appliances or dispensing large amounts of LP-Gas into the atmosphere from the other tank. When changing out a tank, simply close the tank valve and disconnect. The check will automatically move to the closed tank valve side to seal off the inlet of that tank allowing minimal LP-Gas discharge into the atmosphere. Primary uses are for mobile homes, single appliances, recreational vehicles or summer cottages. ME-T9-444 ME1701A The manual changeover works the same as the check except it requires the consumer to manually close the manifold valve on the side of the tank being changed over. ME1705A ME1700A

96 POL ADAPTERS FLARE/BRASS FITTINGS High Pressure Gas Connections MEC Space Saver Dielectric Unions ME23C Soft Nose POL Hard Nose POL Hose Barb Hose Barb Assembly Only Nut Only Hose I.D. Threads ME23C ME23C-1 ME23C-2 1/4 9/16-18 Female Left Hand ME23E ME23E-1 ME23C-2 3/8 9/16-18 Female Left Hand Male Hard Male Soft Connection POL Nose POL Nose POL ME1650 ME1650SN 7/8 Nut ME /8 Nut ME1689 ME N ME1645 9/16-18 Male Left Hand.9 GPM Excess Flow, 7/8 Nut.9 GPM Excess Flow, Plastic Handwheel ME GPM Excess Flow, 1-1/8 Nut ME1689-EX GPM Excess Flow, 7/8 Nut Outlet Bushings Male Left Hand Thread Thread ME24C 9/ /4 MNPT ME24E 9/ /8 MNPT ME24F 9/ /2 MNPT ME26C 9/ /16-18 Male Left Hand OAL ME Dielectric Union 1/2 MNPT x 3/8 Male Flare 3-3/8 ME Dielectric Union 3/4 MNPT x 3/8 Male Flare 3-1/2 ME Dielectric Union 1/2 MNPT x 1/2 Male Flare 3-1/2 ME Dielectric Union 3/4 MNPT x 1/2 Male Flare 3-5/8 ME Dielectric Union 1/2 MNPT x 5/8 Male Flare 3-5/8 ME Dielectric Union 3/4 MNPT x 5/8 Male Flare 3-3/4 The ME690 Series Dielectric Unions are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion. The ME690 dielectric union would typically be installed at the ASME tank directly downstream of the first stage regulator but prior to underground piping and/or at the inlet of the second stage regulator above ground at the dwelling. Thus, it protects the underground metallic piping from corrosion and electrical current. Heavy duty brass construction Convenient Male NPT x Male SAE flare connection to minimize potential piping leak points and extra fittings Compact size for tight spaces Wide wrench flats for easy installation Will not conduct an electrical charge from one side of the union to the other ME I ME24C WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. I FLARE/BRASS FITTINGS Last Chance Adapters ME480 Packaged Part No. Inlet Outlet ME Female 1-5/16 Male Acme/Female POL Full Flow ME480EX 1-20 Female 1-5/16 Male Acme/Female POL.9 GPM Excess Flow ME480EX Female 1-5/16 Male Acme/Female POL 1.8 GPM Excess Flow ME481 ME481P** 1-20 Female 1-5/16 Male Acme/Female POL Shutoff Poppet ME480EX * An excess flow device does not provide a 100% shutoff, small amounts of propane may leak if disconnected ** Packaged option consists of a plastic clamshell with insert card Last Chance Adapters provide a quick way to change from a 20 pound cylinder to a 1 pound disposable cylinder. Can be used to connect a small 1 pound disposable cylinder to a gas grill or other appliance. NOTE: To use the male POL on the ME393 series, simply remove the internal gasket. The gasket must be in place to use the Type I (QCC) connection. ME481P WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices

97 FLARE/BRASS FITTINGS FLARE/BRASS FITTINGS Flare Fittings and Pipe Thread Adapters Flare Fittings and Pipe Thread Adapters Reducing Unions O.D. Tube Size MEF /2 x 3/8 MEF /8 x 3/8 MEF /8 x 1/2 Reducing Forged Swivel Nuts O.D. Tube Size ME-US /2 x 3/8 ME-US /8 x 1/2 Forged Swivel Nuts O.D. Tube Size ME-US4-6 3/8 ME-US4-8 1/2 ME-US4-10 5/8 Forged Female Elbows O.D. Tube Size FNPT MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /2 3/8 MEF /2 1/2 MEF /2 3/4 MEF /8 1/2 MEF /8 3/4 Forged Male Elbows O.D. Tube Size MNPT MEF /4 3/8 MEF /8 1/4 MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /2 1/4 MEF /2 3/8 MEF /2 1/2 MEF /2 3/4 MEF /8 1/2 MEF /8 3/4 2 Way Forged Elbows O.D. Tube Size MEF55-6 3/8 MEF55-8 1/2 MEF /8 MEF /4 Male Tee O.D. Tube Size MEF /8 MEF /2 MEF /8 I I Male Connectors O.D. Tube Size MNPT Female Connectors O.D. Tube Size FNPT Pipe Threads Unions MNPT MNPT Flare Caps O.D. Tube Size Flare Plugs O.D. Tube Size Female Tee FNPT MEF /4 1/8 MEF /4 1/4 MEF /8 1/8 MEF /8 1/4 MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /2 1/4 MEF /2 3/8 MEF /2 1/2 MEF /2 3/4 MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /4 1/2 MEF /4 3/4 MEF /4 1/4 MEF /8 1/4 MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /2 3/8 MEF /2 1/2 MEF /2 3/4 MEF /8 3/8 MEF /8 1/2 MEF /8 3/4 MEF /8 1/8 MEF /4 1/4 MEF /8 3/8 MEF /8 1/2 MEF /2 1/2 MEF /4 3/4 Tube Nut O.D. Tube Size MEF41-6 3/8 ME /4 ME /8 ME /2 ME /4 Short Forged Nuts O.D. Tube Size ME-NS4-4 1/4 ME-NS4-6 3/8 ME-NS4-8 1/2 ME-NS4-10 5/8 ME-NS4-12 3/4 MEP2-4 1/4 MEP2-6 3/8 MEP2-8 1/2 MEP2-12 3/4 Full Unions O.D. Tube Size MEF /4 MEF /8 MEF /2 MEF /8 ME /4 Reducing Forged Nuts O.D. Tube Size ME-NS /8 x 1/4 ME-NS /2 x 1/4 ME-NS /2 X 3/8 ME-NS /8 X 1/

98 COPPER TUBING COATED COPPER TUBING Refrigeration Copper Tubing, O.D. Coated Type L Copper Tubing, I.D. O.D. Tube Size Length Wall Thickness CT0450 1/ CT0650 3/ CT / CT0850 1/ CT / CT1050 5/ CT / This item is sold by outside diameter (O. D.) I. D. Tube Size Length Wall Thickness GTL0460 1/ GTL / GTL0660 3/ GTL / GTL0860 1/ GTL / This item is sold by inside diameter (I. D.) I CT0650 Type K Copper Tubing, I.D. I. D. Tube Size Length Wall Thickness KT0460 1/ KT / KT0660 3/ KT / KT0860 1/ KT / This item is sold by inside diameter (I. D.) Type L Copper Tubbing I. D. Tube Size Length Wall Thickness LT0460 1/ LT / LT0660 3/ LT / LT0860 1/ LT / This item is sold by inside diameter (I. D.) COATED COPPER TUBING TracPipe CounterStrike Tubing CORRUGATED STAINLESS STEEL TUBING Size Reel Length Reel Weight (lb.) FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS / FGP-CS FGP-CS FGP-CS FGP-CS FGP-CS FGP-CS FGP-CS FGP-CS OMEGAFLEX TracPipe I GT0650 Coated Refrigeration Copper Tubing, O.D. O.D. Tube Size Length Wall Thickness GT0650 3/ GT / GT0850 1/ GT / GT1050 5/ GT / This item is sold by outside diameter (O. D.) NOTE: Other lengths of TracPipe CounterStrike Tubing are available. Contact your MTankCo representative for more information. Heavy one piece abrasion and lightning resistant jacket Up to 125 PSI working pressure Highest Capacity Rating (EHD) Auto Flare Fitting is both self-flaring and self-piloting to pipe s inner diameter Meets ASTM E84 with respect to flame spread and smoke density

99 GAS PIPING GAS PIPING Underground System PS-II Reels TRACPIPE Reducing Fittings TRACPIPE FGP-UGP Size Reel Length FGP-UGP /8 250 ft. TracPipe PS-II 3/8 Reel FGP-UGP /2 250 ft. TracPipe PS-II 1/2 Reel FGP-UGP /2 100 ft. TracPipe PS-II 1/2 Reel FGP-UGP /4 250 ft. TracPipe PS-II 3/4 Reel FGP-UGP /4 100 ft. TracPipe PS-II 3/4 Reel FGP-UGP ft. TracPipe PS-II 1 Reel FGP-UGP ft. TracPipe PS-II 1 Reel Size FGP-RST /2-3/4 NPT AutoFlare Reducing 1/2 FGP-RST /4-1/2 NPT AutoFlare Reducing 3/4 FGP-RST /4 NPT AutoFlare Reducing 1 Female Straight Fittings TRACPIPE Reducing Fitting I Coupling FGP-UGC-750 AutoSnap Straight Fitting Male Adapter FGP-UGF-750 Underground System PS-II Adapters and Couplings Size FGP-UGF-375 3/8 NPT Male TracPipe PS-II 3/8 Male Adapter FGP-UGF-500 1/2 NPT Male TracPipe PS-II 1/2 Male Adapter FGP-UGF-750 3/4 NPT Male TracPipe PS-II 3/4 Male Adapter FGP-UGF NPT Male TracPipe PS-II 1 Male Adapter FGP-UGC-375 3/8 T/P Cplg TracPipe PS-II 3/8 Coupling FGP-UGC-500 1/2 T/P Cplg TracPipe PS-II 1/2 Coupling FGP-UGC-750 3/4 T/P Cplg TracPipe PS-II 3/4 Coupling FGP-UGC T/P Cplg TracPipe PS-II 1 Coupling AutoSnap Straight Fittings Size FGP-SFST-375 3/8 AutoSnap 3/8 FGP-SFST-500 1/2 AutoSnap 1/2 FGP-SFST-750 3/4 AutoSnap 3/4 FGP-SFST AutoSnap 1 FGP-SRING-375 3/8 FGP-SRING-500 1/2 FGP-SRING-750 3/4 Spare Snap Rings FGP-SRING TRACPIPE TRACPIPE Size FGP-FSTF-375 3/8-1/2 NPT AutoFlare Female Straight 3/8 FGP-FSTF-500 1/2 AutoFlare Female Straight 1/2 FGP-FSTF-750 3/4 AutoFlare Female Straight 3/4 FGP-FSTF AutoFlare Female Straight 1 FGP-FSTF /4 AutoFlare Female Straight 1-1/4 FGP-FSTF /2 AutoFlare Female Straight 1-1/2 Couplings Size FGP-CPLG-375 3/8 Coupling 3/8 FGP-CPLG-500 1/2 Coupling 1/2 FGP-CPLG-750 3/4 Coupling 3/4 FGP-CPLG Coupling 1 FGP-CPLG /4 Coupling 1-1/4 FGP-CPLG /2 Coupling 1-1/2 FGP-CPLG Coupling 2 Flange Fittings Size FGP-BFF-375 3/8 Flange Fitting 3/8 FGP-BFF-500 1/2 Flange Fitting 1/2 FGP-BFF Flange Fitting 1 FGP-BFF /4 Flange Fitting 1-1/4 FGP-TERM-BRAC All Flange L Bracket FGP-ELLB-375 3/8 90 Flange Fitting 3/8 FGP-ELLB-500 1/2 90 Flange Fitting 1/2 FGP-BF90V-375 3/8 90 Flange Valve 3/8 FGP-BF90V-500 1/2 90 Flange Valve 1/2 FGP-BF90V-750 3/4 90 Flange Valve 3/4 TRACPIPE TRACPIPE Female Straight Fitting Coupling Flange Fitting I

100 GAS PIPING GAS PIPING Meter Termination and Mounts TRACPIPE Protection TRACPIPE Meter Termination Size FGP-MT /2 x 6 6 Meter Termination 1/2 FGP-MT /4 x 6 6 Meter Termination 3/4 FGP-MT x 6 6 Meter Termination 1 FGP-MT Meter Termination 1 FGP-MT /2 x Meter Termination 1/2 FGP-MT /4 x Meter Termination 3/4 FGP-MT x Meter Termination 1 FGP-MT-BRAC All Meter Termination Bracket FGP-TM-375 3/8 Termination Mount 3/8 FGP-TM-500 1/2 Termination Mount 1/2 FGP-TM-750 3/4 Termination Mount 3/4 FGP-TM /4 x 1/2 Termination Mount 3/4 x 1/2 FGP-TM Termination Mount 1 FGP-90TM-375 3/8 90 Termination Mount 3/8 FGP-90TM-500 1/2 90 Termination Mount 1/2 FGP-TM90V-375 3/8 90 Termination Valve 3/8 FGP-TM90V-500 1/2 90 Termination Valve 1/2 FGP-TM90V-750 3/4 90 Termination Valve 3/4 Size FGP-SP x 2 Quarter Striker Plate FGP-SP x 7 Half Striker Plate FGP-SP x 9 Three Quarter Striker Plate FGP-SP x 12 Full Striker FGP-SP /2 x 17 Striker Plate FGP-FPY-375CT 3/4 Floppy, Fits 3/8 Cut 1 ft. FGP-FPY-500CT 1 Floppy, Fits 1/2 Cut 1 ft. FGP-FPY-750CT 1-1/4 Floppy, Fits 3/4 Cut 1 ft. FGP-FPY-1000CT 1-1/2 Floppy, Fits 1 Cut 1 ft. FGP-FPY /4 Floppy, Fits 3/8 FGP-FPY Floppy, Fits 1/2 FGP-FPY /4 Floppy, Fits 3/4 FGP-FPY /2 Floppy, Fits 1 FGP-FPY Floppy, Fits 1-1/4 FGP-FPY /2 Floppy, Fits 1-1/2 FGP-FPY Floppy, Fits 2 FGP H-12BL 1 x 12 yd. Tape, Black FGP-LCS 1 Quart Non-Corrosive Leak Check Solution Three Quarter Striker Plate FGP-SP-075 Full Striker FGP-SP-100 I Termination Mounts Tee Fitting Manifold Tee Fittings Size FGP-T /2 x 3/4 Male Tee - Male 3/4 FGP-T /2 Female Tee - Female 1/2 FGP-T /4 x 1/2 Female Tee - Female 1/2 FGP-T /4 Female Tee - Female 3/4 FGP-T Female Tee - Female 1 FGP-TF500-T500 1/2 x 1/2 Tee - TracPipe 1/2 FGP-TF750-T750 3/4 x 3/4 Tee - TracPipe 3/4 FGP-TF1000T x 1 Tee - TracPipe 1 Manifolds Size FGP-MI-PC 3/4 x 1/2 x 1/2 (4) Coated Manifold FGP-MB2 Fits MI-PC Manifold Bracket FGP-MI-ST-500 1/2 F- M x 1/2 (2) Stackable Manifold FGP-MI-ST-750 3/4 F- M x 1/2 (2) Stackable Manifold FGP-MI-ST Fits MI-ST Stackable Manifold Bracket FGP-LC Load Center w/ Bracket FGP-MI-PC-1X 1-1/4 x 1 x 3/4 (4) Large Coated Manifold FGP-MI-PC-2X 2 x 1-1/2 x 1 (4) Large Coated Manifold TRACPIPE Tee Reducer Fittings are available in various sizes. Contact your MTankCo representative for more information. TRACPIPE Protection Size FGP-GC-1 1/2-1 IPS Bonding Clamp for 3/8, 1/2 TracPipe CounterStrike FGP-TC-15 3/8-1 Cutter No. 15 FGP-QDS 1/2 Sturgis Quick Disconnect FGP-ITAG-50 All Installation Tags FGP-TAG-20 All High Pressure Tags FGP-ITAG-50 Installation Tags Plastic Pipe PP08 1/2 CTS Tubing, 500 Roll - SDR 7 PP12 3/4 IPS Tubing, 500 Roll - SDR 11 PP16X500 1 IPS Tubing, 500 Roll - SDR 11 PP20X /4 IPS Tubing, 500 Roll - SDR 10 PP32X250 2 IPS Tubing, 250 Roll - SDR 11 PP32X500 2 IPS Tubing, 500 Roll - SDR 11 This item is sold in CTS (copper tube size) and IPS (iron pipe size). TRACPIPE PLASTIC PIPE I

101 CON-STAB FITTINGS CON-STAB FITTINGS Reducing Tee CON-STAB Couplings CON-STAB Repair Couplings CON-STAB Tees CON-STAB /2 CTS x 1/2 CTS x 3/4 IPS /4 IPS x 3/4 IPS x 1/2 CTS IPS x 1 IPS x 3/4 IPS /2 CTS /4 IPS IPS /4 IPS IPS /2 CTS x 8 long /2 CTS x 12 long /2 CTS x 24 long /4 IPS x 8 long /4 IPS x 12 long /4 IPS x 24 long IPS x 8 long IPS x 12 long /2 CTS /4 IPS IPS /4 IPS IPS Reducing Tee Coupling Repair Coupling Tee 90 Elbow CON-STAB Reducing Couplings CON-STAB Self-Tapping Tee CON-STAB Chamfer Tool CON-STAB I /2 CTS /4 IPS IPS /4 IPS IPS /4 IPS x 1/2 CTS IPS x 1/2 CTS IPS x 1 CTS IPS x 3/4 IPS /4 IPS Main x 1/2 CTS /4 IPS Main x 3/4 IPS IPS Main x 1/2 CTS IPS Main x 3/4 IPS IPS Main x 1 IPS /4 IPS x 1/2 CTS Chamfer Tool (5/8 O.D.) /4 IPS Chamfer Tool IPS Chamfer Tool IPS x 1 CTS Chamfer Tool I Reducing Tee Reducing Coupling Chamfer Tool Self-Tapping Tee

102 RISERS APPLIANCE CONNECTORS Plastic Pipe Risers CON-STAB Stainless Steel Gas Appliance Connectors with Constab Size (MPT X PE) Wall Vertical Length Horizontal Length , ,2 1/2 MPT X 1/2 CTS (5/8 OD) PE , ,2 3/4 MPT X 1/2 CTS (5/8 OD) PE ,2 3/4 MPT X 1/2 CTS (5/8 OD) PE , /4 MPT X 1/2 IPS PE SDR-9.3 (.090) , ,2 3/4 MPT X 3/4 IPS PE SDR-11 (.095) , /4 MPT X 1 CTS (1-1/8 OD) PE.099/ , ,2 1 MPT X 1 CTS (1-1/8 OD) PE.099/ , ,2 1 MPT X 1 IPS PE SDR-11 (.119) , /4 MPT X 1-1/4 IPS PE SDR-10 (.166) A 1, /4 MPT X 1-1/4 IPS PE SDR-11 (.151) , ,2 1-1/2 MPT X 1-1/2 IPS PE SDR-11 (.173) , MPT X 2 IPS PE SDR-11 (.216) CSA Approved 2 IAPMO/UPC Listed Plastic Pipe Risers are designed to meet or exceed pressure rating of PE pipe per 49 CFR Part 192 and ASTM D2513. It is recommended to use Continental s Bladed Chamfering Tool. Part numbers listed are for 2406 medium density polyethylene pipe. For part numbers with 3408 high density pipe, contact your MTankCo representative. Length 1637NX NX NX NX NX NX NX NX NX NX NX NX /8 ID / 1/2 OD with 1/2 Female x 1/2 Male 1/2 ID / 7/8 OD with 3/4 Female x 3/4 Male Residential Connectors are durable, flexible, and easy to install. Designed with built-in safety features, Supr-Safe connectors help prevent dangerous gas leaks and provide for a long and trouble-free service life. 1637NX12 I Plastic Pipe Riser Plastic Pipe Riser with Con-Stab ID Seal Couplings Flex Pipe Risers Size (MPT X PE) Wall CON-STAB /2 MPT X 1/2 CTS (5/8 OD) PE /2 MPT X 1/2 IPS PE SDR-9.3 (.090) /4 MPT X 1/2 CTS (5/8 OD) PE /4 MPT X 1/2 IPS PE SDR-9.3 (.090) /4 MPT X 3/4 CTS (7/8 OD) PE /4 MPT X 3/4 IPS PE SDR-11 (.095) /4 MPT X 1 CTS (1-1/8 OD) PE.099/ MPT X 1/2 CTS (5/8 OD) PE MPT X 1/2 IPS PE SDR-9.3 (.090) MPT X 3/4 CTS (7/8 OD) PE MPT X 3/4 IPS PE SDR-11 (.095) MPT X 1 CTS (1-1/8 OD) PE.099/ /4 MPT X 1 CTS (1-1/8 OD) PE.099/ MPT X 1 IPS PE SDR-11 (.119) * 1-1/4 MPT X 1-1/4 IPS PE SDR-10 (.116) * This item does not include a liner sleeve, all other risers come with a liner sleeve. Super-Safe Connectors for Mobile Homes Length 1675NPX /4 I.D. / 1 O.D. 1675NPX /4 I.D. / 1 O.D. Dormont Black Appliance Connectors Length /4 ID x 3/8 OD - 3/8 MPT x 1/2 FNPT DORMONT Black Appliance Connectors are specifically designed for high-temperature applications such as gas logs, fireplace inserts, etc. They reduce glare and hide the connector from view. 1675NPX24 I ORDERING NOTE: All Risers come in 36, 60, 72, 84, and 96 lengths. When ordering, add a dash then the riser length after the prefix Item Number, i.e. XXXXXX-72 indicates a 72 inch length riser. NOTE: Slide the plastic tubing through the riser to the end and make your connection there, above ground. No connections underground, no coupling needed. Flex Pipe Riser Simplified compression style anodized service head Reusable fitting with Buna seal, strengthened with a spiral steel stiffener Integral swivel for easy installation Complete with poly liner and lower moisture seal Meets or exceeds NFPA58 and ANSI standards

103 DOMESTIC TANK VALVES & ACCESSORIES DOMESTIC TANK VALVES & ACCESSORIES Liquid Transfer Valves and Adapters Liquid Transfer Adapters Accessories Liquid Liquid Withdrawal Tank Valve Closing Withdrawal 1-5/8 UNF Male Material Excess Hydrostatic Vent Flow Flow/ Adapter 3/4 3/4 1-1/4 MNPT Relief Valve Valve GPM FNPT x 1-5/8 UNF MNPT Brass Steel* Brass Brass Steel* Stainless Steel* ME449 Brass No ME458 ME458S ME460*** ME462*** ME449H Brass No ME458 ME458S ME449S Ductile Iron* No ME458S ME462S*** ME462SS*** ME449EXS/22 Ductile Iron* Yes 22 ME449EXS/28 Ductile Iron* Yes 28 ME450** Brass No ME601-6 ME *Rated for LP-Gas and NH 3 ** MEJ400 Vent Valve factory installed *** Includes an excess flow feature MEH225 MEH25/450 Factory Installed MEH225 MEH225SS/350 MEH225SS/400 MEH225SS/440 MEJ400 MEJ400SC MEJ400/72 MEJ402S Material Inlet Connection Outlet Connection ME458 Brass 1-5/8 UNF 3/4 FNPT ME458S* Steel 1-5/8 UNF 3/4 FNPT ME453 Brass 3/4 NGT 3/4 FNPT ME455 Brass 3/4 NGT 3/4 MNPT * Rated for LP-Gas and NH 3 Liquid Transfer Adapters are designed for use between the liquid transfer shutoff valve and the liquid withdrawal tank valve. These adapters enable the tank valve to open properly and allows a tight seal when transferring liquid. Special threads on the tank valve and the adapter help eliminate tampering. The ME458 Series fits all new underwriters laboratories listed valves. The ME453 and ME455 fit older style liquid withdrawal tank valves that are still in service and have not been replaced. They will not provide a positive seal during actuation of liquid withdrawal tank valve until fully seated. ME458 ME453 ME455 J ME450 Liquid Transfer Valves and Adapters provide a safe means by which to transfer liquid from a tank during an emergency or container relocation. These valves can be equipped with an integral excess flow device for direct product transfer or without when used in conjunction with liquid withdrawal adapter (ME458 Series) and tank valve (ME460 and ME462 Series). WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Contact the manufacturer for more information regarding the use of excess flow devices. Double O-ring stem seal design ensures leak free operation 3/4 MNPT inlet x 3/4 FNPT outlet STEEL TRANSFER VALVES All stainless steel internal components Durable ductile iron valve body with automotive grade powder coat finish Equipped with convenient upstream and downstream 1/4 FNPT plugged ports for optional accessories Double lead stem thread ensures quick and efficient operation TANK VALVE Provides excess flow protection in the event of a downstream connection or line failure Safety breakaway feature leaves valve seals intact in the event of truck roll-away 6-14 PSIG closing flow pressure differential for maximum product transfer Fully interchangeable with all existing valve models and adapters Meets requirements for installation into DOT storage containers like bobtails and transports Steel model features a rust inhibitor compound between the cap and body threads to prevent corrosion Combination Valves Container Two Service Dip Tube Accessories Material Connection Connection Connection Stainless Steel Stainless Steel MNPT FNPT FNPT Vent Valve Pressure Gauge* ME830 Ductile Iron 3/4 MNPT 1/4 FNPT 1/8 Included MEJ526 MEJ542 MEJ415 Steel 3/4 MNPT 1/4 FNPT 1/8 MEJ402S MEJ542 MEJ415G Steel 3/4 MNPT 1/4 FNPT 1/8 Included Included * PSIG Combination Valves have a pressure gauge and fixed tube liquid level gauge all in one valve. The shutoff portion of the valve increases the pressure gauge s life and accuracy by eliminating constant gauge pressure and allows for easy gauge replacement. To replace a gauge simply close the valve and open the vent valve to relieve pressure before disassembling pressure gauge. The valve can be installed at the maximum fill level or an 1/8 MNPT dip tube can be installed on the container connection side to set any liquid level desired. For use in ASME bulk storage containers and DOT transport tank installations. All steel and stainless steel component construction Integral #54 orifice provides gauge dampening protection Durable ductile iron body with automotive grade powder coat finish or plated steel body ME830 MEJ415 DJ ME449EXS-22 ME462S MEJ415G

104 DOMESTIC TANK VALVES & ACCESSORIES DOMESTIC TANK VALVES & ACCESSORIES Multipurpose Filler Bypass Return Valve for Dispensing Applications Multipurpose Filler/Withdrawal Valves Approximate Excess Flow Tank Fill Bypass Closing Flow Hydrostatic Connection Connection Return Port *Liquid **Vapor Relief (MNPT) (M. Acme) (FNPT) GPM/LPG SCFH/LPG ME673DEX-6SP 1-1/4 1-3/4 3/ ,000 MEH225 For use with LPG only. The ME673DEX-6SP is Ideally suited for use as a high capacity combination double check fill and liquid bypass return line shut-off valve. These valves are equipped standard with an integrated excess flow feature that is internal to the tank protecting against tank separation. The preinstalled side mounted ME601-6 double check fill valve allows for safe low emissions container filling at a convenient right angle orientation. The top mount 3/4 FNPT port above integrated shut-off valve seat allows for maximum liquid bypass return flow rates without adding an external line shut-off valve. NOTE: For proper operation and performance of the excess flow feature the manual shutoff must be completely open and back-seated. For use with LPG only. Plated ductile iron body with preinstalled MEH225 hydrostatic relief valve All stainless steel internal construction for maximum corrosion resistance V-cup Teflon packing stem seals Rated 400 PSI / WOG Preinstalled ME601-6 double Inlet (MNPT) Fill Connection (M. Acme) Withdrawal (FNPT) *Fill Capacity GPM/LPG Approximate Excess Flow Closing Flow *Liquid **Vapor GPM/LPG SCFH/LPG ME673DEX-6**** 1-1/4 1-3/4 3/ ,000 No ME673DEX-8**** 1-1/4 1-3/ ,000 No ME673DBC-6 1-1/4 1-3/4 3/4 100 N/A N/A Yes ME673DBC-8 1-1/4 1-3/ N/A N/A Yes Back Check Hydrostatic Relief MEH225*** MEH225SS MEH225*** MEH225SS MEH225*** MEH225SS MEH225*** MEH225SS Accessories Vent Valve MEJ400*** MEJ402S MEJ400*** MEJ402S MEJ400*** MEJ402S MEJ400*** MEJ402S * For NH 3 Flow Rates Multiply by.90 ** For NH 100 PSI, Multiply by 1.6 *** Brass accessories cannot be used for NH 3 ****Available for 45 GPM NH 3 closing flow - e.i. ME673DEX-6/45 Multipurpose Filler/Withdrawal Valves are intended for use as a high capacity combination filler and liquid withdrawal valve with a manual shut off device in LPG or NH3 containers. These valves can be equipped with either a soft seat back check or excess flow feature that is internal to the container. Ideally suited for use in dispensing applications as a dual purpose high capacity tank filler valve as well as a liquid return line from the pump bypass valve. NOTE: For proper operation and performance of the excess flow feature the manual shutoff must be completely open and back seated. ME673DEX ME673DEX-6SP Plated ductile iron body with 1/4 NPT auxillary plugged port All stainless steel internal construction Supplied with ACME cap and chain assembly V-cup Teflon packing stem seals Rated 400 PSI/WOG Removable data plate ME673DBC J DJ

105 DOMESTIC TANK VALVES & ACCESSORIES DOMESTIC TANK VALVES & ACCESSORIES Multipurpose Valves ASME Tank Filler Valves Approximate Excess Flow Accessories Inlet Fill Connection *GPM/LPG Closing Flow Back (MNPT) (M. Acme) Fill Capacity Liquid* Vapor** Check Hydrostatic Vent GPM/LPG SCFH/LPG Relief Valve ME670DBC 1-1/4 1-3/4 100 N/A N/A Yes MEH225*** MEJ400*** MEH225SS MEJ402S ME670DEX**** 1-1/4 1-3/ ,000 No MEH225*** MEJ400*** MEH225SS MEJ402S * For NH 3 flow rates multiply by.90 ** For NH 100 PSI, Multiply by 1.6 *** Brass accessories cannot be used for NH 3 **** Available for 45 GPM NH 3 closing flow - e.i. ME670DEX/45 Filler Valve Hose End M. Acme Protective Cap Additional MNPT Connection Included Keys ME /4 1-3/4 Yes ME ME /4 1-3/4 Yes ME ASME Tank Filler Valves allow maximum product transfer with its manually operated open throat design. These valves have an integral high flow primary soft-seat back check and a manually operated secondary shutoff valve for maximum protection against leaks. Because these valves provide a manually operated shutoff device, the need for a flow restricting fill check adapter has been eliminated. Multipurpose Valves are intended for use as a high capacity filler valve with a manual shutoff device in LPG or NH 3 containers. These valves can be equipped with either a soft seat back check or excess flow feature that is internal to the container. The excess flow version can also be used as a vapor equalizing valve typically found in NH 3 applicators and nurse tank applications. NOTE: For proper operation and performance of the excess flow feature the manual shutoff must be completely open and back seated. Allows 25-50% more product flow during filling operations Manual valve portion assures operator when valve is open or closed Removable key provided to prevent tampering Durable all brass construction for maximum weather and spark resistance Constructed with a durable Nitrile O-ring primary back check seal and reliable Teflon packing for secondary manual valve seal ASME Tank Filler Valves ME670DBC Plated ductile iron body with 1/4 NPT auxillary plugged port All stainless steel internal construction for maximum corrosion resistance Supplied with ACME cap and chain assembly V-cup Teflon packing stem seals Rated 400 PSI/WOG Removable data plate ME670DEX J ME671D-8 Multipurpose Withdrawal Valves Approximate Inlet Withdrawal Excess Flow Back Accessories (MNPT) (FNPT) Closing Flow Liquid Check Hydrostatic Vent GPM/LPG* Relief Valve ME671DIBC-6 3/4 50 ME671DIBC-8*** 1 58 ME671D-6 1-1/4 3/4 50 No ME671D-8*** 1 58 ME672D 1 78 MEH225** MEH225SS MEH225** MEH225SS MEH225** MEH225SS MEJ400** MEJ402S MEJ400** MEJ402S MEJ400** MEJ402S MEJ400** MEJ402S MEJ400** MEJ402S DJ * For NH 3 flow rates multiply by.90 ** Brass accessories cannot be used for NH 3 service *** Available for 45 GPM NH 3 closing flow - e.i. ME671D-8/45 ME672D The ME671DIBC has an integrated back check (IBC) feature built into the lower portion of the seat disc assembly. This allows liquid pressure built upstream of the shut-off disc assembly to automatically be relieved back to the container when line pressures exceed PSI over container pressure. The (IBC) feature eliminates the need for hydrostatic relief valves to protect upstream piping or lines as well as greatly reducing product emissions and overall system safety

106 DOMESTIC TANK VALVES & ACCESSORIES DOMESTIC TANK VALVES & ACCESSORIES Double Check Fill Valves ASME/ DOT Container Service Valves ME601-6 ME ME601-6 ME Double Check Fill Valves are designed for DOT forklift, engine fuel and ASME residential tanks, these double check filler valves automatically open with pump pressure providing maximum product flow rates. Once flow ceases, both upper and lower check mechanisms close to prevent product loss from the container. The lower check serves as a secondary seat to limit product loss in the event that the primary upper seat fails to operate properly due to damage. Industry best flow rate Resilient bonded main valve seal Field repairable upper check seat 1-3/4 M. Acme x 3/4 MNPT Double Fill Valve with Cap & Lanyard 1-3/4 M. Acme x 1-1/4 MNPT Double Fill Valve with Cap & Lanyard Flow Rate LPG Accessories 10 PSI 20 PSI Cap & Lanyard ME ME Integral break away feature leaves primary check intact in the event of truck roll away Factory applied thread sealant Dip Tube Length ME9101C1 3/4 MNPT X F. POL ASME/ DOT Service Valve (No Dip Tube) 4,000 SCFH/LPG ME9101D /4 MNPT X F. POL ASME/ DOT Service Valve (with Dip Tube) 11.1 ME9101D /4 MNPT X F. POL ASME/ DOT Service Valve (with Dip Tube) 11.7 ASME/ DOT Container Service Valves are for use in vapor withdrawal service for ASME and DOT containers or as fuel line shutoff valves. NOTE: These valves do not have an integral pressure relief valve. Use them with containers that have a separate stand alone pressure relief valve sized to properly handle the container s capacity. One piece forged brass body construction Dual O-ring packing design Easy to repair/replace bonnet assembly Universal bonnet assembly Industry best fill flow rate Factory applied thread sealant Heavy duty replaceable zinc hand wheel ME9101D-11.7 ME9101C1 Vapor Equalizing Valves Closing Flow ME663 Double Check Vapor Return Valve 3/4 MNPT x 1-1/4 M. ACME with Plastic Cap 4,000 SCFH/LPG ME664 Single Check Vapor Return Valve 3/4 MNPT x 1-1/4 M. ACME with Plastic Cap N/A ASME/ Tank Manifolding Service Valves Excess Flow GPM ME9101C5 3/4 MNPT X F. POL ASME/ DOT Container Service Valve 2.6 GPM ASME Tank Manifolding Service Valves are intended for use in vapor withdrawal service for ASME tanks where more than one vessel is installed. The internal excess flow device at the inlet of the shutoff valve provides excess flow protection in the event of a downstream line break. J ME663 Double Check Valve MEC Vapor Equalizing Valves can be purchased in single or double check versions. The single check version can be used to facilitate pressure equalization of lines or containers but must not be installed directly into the container. A properly sized excess flow device must first be installed into container openings for compliance with NFPA Pamphlet #58. Double check versions consist of both an upper and lower check assembly. The upper check can be opened with vapor equalizing hose couplings equipped with projecting nozzle tips where the lower check is a normally open excess flow type. The lower excess flow check assembly automatically closes when flow out of the container exceeds its rated capacity. MEC double check vapor equalizing valves feature a two piece body construction where the upper check can be repaired while in service with minimal leakage from the container. NOTE: These valves do not incorporate an integral pressure relief valve or double check fill valve and are intended for use in containers that have a stand-alone pressure relief valve sized to properly handle the container s capacity and a separate double check fill valve. One piece forged brass body construction Dual O-ring packing design Easy to repair/replace bonnet assembly Universal bonnet assembly Industry best fill flow rate Factory applied thread sealant Heavy duty replaceable zinc hand wheel ASME Compliant ME9101C1 DJ ME664 Single Check Valve High flow construction Resilient bonded main valve seal Field repairable upper check seat Integral break away feature leaves primary check intact in the event of a line pull away ME9101C5 Service Valve 500 Gallon Tank ME1680 Series Copper Pigtail ME1701B Tee Fitting 500 Gallon Tank ME9101C5 Service Valve MEGR-1622 Series First Stage Regulator

107 DOMESTIC TANK VALVES & ACCESSORIES DOMESTIC TANK VALVES & ACCESSORIES Multi-Service Vapor Valves for ASME Cylinders Multi-Service Vapor Valves ME /2 MNPT Multi-Service Valve Inlet Outlet Vent Type Diptube Length ME /2 MNPT F. POL MEJ401 ME662SC 1-1/2 MNPT F. POL MEJ401SC 16 ME665 3/4 MNPT F. POL MEJ401 ME665SC 3/4 MNPT F. POL MEJ401SC 12 The ME662 Series Multi-Service Valve is intended for use in vapor withdrawal service for ASME containers or as fuel line shutoff valves in combination with an integral double check fill and vapor equalization valve. The ME665 Series Multi-Service Valve is intended for use in vapor withdrawal service for ASME containers or as fuel line shutoff valves in combination with an integral double check vapor equalization valve. NOTE: ME662 and ME665 series valves do not incorporate an integral pressure relief valve or double check fill valve and are intended for use in containers that have a stand-alone pressure relief valve sized to properly handle the container s capacity and a separate double check fill valve. Filler Connection Inlet Inlet Inlet Inlet Inlet MES-PVE2035AT /4 ACME 1 NGT F. POL MES-PVE2035ATSC /4 ACME 1 NGT F. POL MEJ401SC MES-PVE2035AT /4 ACME 1 NGT F. POL MES-PVE2035ATSC /4 ACME 1 NGT F. POL MEJ401SC MES-PVE2035AT /4 ACME 1 NGT F. POL MES-PVE2035ATSC /4 ACME 1 NGT F. POL MEJ401SC MES-PVE2035AT /4 ACME 1 NGT F. POL MES-PVE2035ATSC /4 ACME 1 NGT F. POL MEJ401SC MES-PVE2035AT /4 ACME 1 NGT F. POL MES-PVE2035ATSC /4 ACME 1 NGT F. POL MEJ401SC Multi-Service Vapor Valves Indended for use in vapor withdrawal service for DOT or ASME containers ranging from 420 lbs. to 100 gallons LPG capacity as fuel line shutoff valves in combination with a fill and vapor relief valve. Ideal for on-site filling without interruption of service by combining all functions into a single 1 tank opening. One piece forged brass body construction Dual O-ring packing design Easy to repair/replace bonnet assembly Universal bonnet assembly Heavy duty replaceable zinc hand wheel Plugged test port: ME662 Series - 1/4 FNPT ME665 Series - 1/8 FNPT SC model features optional self-cleaning LE thumb screw vent One piece forged brass body construction Integral fill valve Easy to repair/replace bonnet assembly Integral 375 PSI or 250 PSI relief valve Heavy duty replaceable zinc hand wheel 1/8 FNPT plugged test port Optional MEJ401SC self-cleaning LE fixed liquid level vent screw Liquid splash tube to prevent liquid in vapor opening F. POL vapor outlet with shutoff ME665 3/4 MNPT Multi-Service Valve J MES-PVE2035AT Multi-Service Valve DJ

108 DOMESTIC TANK VALVES & ACCESSORIES DOMESTIC TANK VALVES & ACCESSORIES Underground Tank Cluster Manifold Multi-Service Valve CAVAGNA GROUP Container Connection Filling Connection These Multi-Purpose Valves are designed for use on domestic ASME underground tanks that require a single opening except for a separate liquid withdrawal port. Service Connection Size Closing Flow Epoxy coated ductile iron manifold Durable o-ring service valve packing Easy to repair/replace bonnet Standard 1/4 NPT plugged gauge port Gauge Flange Opening Fits Junior Size Fits Junior Size Pressure Relief Valve Setting Relief Valve Capacity Fixed Liquid Level Type MEJ400C MES-PVE2098AT MES-PVE2098ATSC 2-1/2 FNPT 2-1/2 FNPT 1-3/4 ACME 1-3/4 ACME F. POL F. POL PSIG 250 PSIG 250 PSIG 1740 SCFM/air MEJ400SC MES-PVE2098PT* 2-1/2 FNPT 1-3/4 ACME F. POL 4000 CFH 250 PSIG 1740 MEJ400C MES-PVE2098PTSC* 2-1/2 FNPT 1-3/4 ACME F. 100 PSIG 250 PSIG SCFM/air MEJ400SC * Includes ME460 Liquid withdrawal valve packed seperately in carton. MES-PVE2098AT Supplied with 30 diptube that can be cut to length Optional LE vent valve available Tank Connection MNPT Vapor Service Connection Filler Connection ACME Propane Liquid Capacity at Various Pressure Relief Valve Differential Pressure (GPM) Flow Capacity (SCFM) Air Fixed Liquid DT Level Gauge Length PRV PSIG PSIG PSIG PSIG Setting UL /4 POL (CGA 510) 1-3/4 Not Captive /4 POL (CGA 510) 1-3/4 Not Captive /4 POL (CGA 510) 1-3/4 Not Captive /4 POL (CGA 510) 1-3/4 Not Captive /4 POL (CGA 510) 1-3/4 Not Captive /4 POL (CGA 510) 1-3/4 Not Captive These Multi-Service Valves are multi-purpose and are suitable for lb. DOT containers. The can also be used for a 60 gallon tank. They are ideal for on site filling of DOT cylinder up to 200 lb. LPG capacity without interrupting service. Includes a service valve, back check filler valve, fixed maximum liquid level gauge (specify DT length when ordering) New high discharge flow capacity pressure relief valve (1123 UL listing) Reduced filler valve chamber reduces the waste of LPG during filling operation Increased high filling capacity Double O-ring replaceable stem Underground Tank Cluster Valve Removal Tool MEP126 Underground Tank Cluster Valve Removal Tool The Underground Tank Cluster Valve Removal Tool is a universal design for convenient removal of underground tank cluster valves using a standard 3/4 drive socket wrench. 420 Multivalve CAVAGNA GROUP J MEP126 Durable cast steel construction Powder coat finish for maximum corrosion protection 3/4 drive Tank Vapor Service Filler Fixed Liquid DT PRV Connection Connection Connection Level Gauge Length Setting NPT POL (CGA 510) 1-3/4 ACME Not Captive PSIG The 420 Multivalve is a multi purpose valve with double back check filler valve designed for use with 420 Ib. DOT containers. DJ Includes a service valve, back check filler valve, fixed maximum liquid level gauge (specify DT length when ordering) Increased high filling capacity Reduced filler valve chamber reduces the waste of LPG during filling operation Double O-ring replaceable stem

109 DOMESTIC TANK VALVES & ACCESSORIES DOMESTIC TANK VALVES & ACCESSORIES Underground Multi-Service Valve CAVAGNA GROUP Multi-Service Valve CAVAGNA GROUP Tank Connection MNPT Vapor Service Connection Filler Connection ACME Propane Liquid Capacity at Various Pressure Relief Valve Differential Pressure (GPM) Flow Capacity (SCFM) Air DT Length PRV PSIG PSIG PSIG PSIG Setting UL ASME /2 POL (CGA 510) 1-3/ Underground Multi-Service Valve The Underground Multi-Service Valve with Integrated Evacuation Valve is designed for use in a single opening ASME container with a riser of 2-1/2 MNPT. A separate opening is NOT required for a liquid withdrawal valve. Internal threads accommodate 2-1/2 MNPT riser pipe connection and a 3/4 FNPT connection for the filling valve opening. Double back check filler valve Vapor equalizing valve with excess flow Pressure relief valve with protective cap Service valve with Cavagna quality handwheel system Plugged 1/4 FNPT gauge boss Fixed liquid level gauge with 36 DT Junior size float gauge flange opening Double O-ring service valve; individual replacement system CAVAGNA GROUP Tank Vapor Service Vapor Line Gauge Fixed Liquid Fixed Level Gauge Wrench Connection Connection Connection Boss Level Gauge DT Length Hex Flat /4 MNPT Female POL CGA /4 M.ACME 1/4 FNPT Yes 12 1 Multi-Service Valves are suitable for ASME tanks where a vapor service valve is required. This valve has in the same body a service valve, a vapor withdrawal valve and a fixed level gauge. Improved stem seal Redesigned Body Configuration Convenient Level Gauge Filler Valves and Gauge connection can be plugged or left unplugged for installation of a pressure gauge Ever-Seal is pre-applied on the inlet thread CAVAGNA GROUP Container Line Wrench Propane Liquid Capacity at Various Differential Pressure (GPM) Connection Connection Hex Flat 10 PSIG 20 PSIG 25 PSIG 30 PSIG 40 PSIG 50 PSIG 75 PSIG /4 MNPT 1-3/4 M.ACME 1-3/ /4 MNPT 1-3/4 M.ACME 1-3/ * 1-1/4 MNPT 1-3/4 M.ACME 1-3/ *Has a two-piece body Propane Liquid Capacity at Various Pressure Relief Valve Tank Filler Differential Pressure (GPM) Flow Capacity (SCFM) Air Connection Vapor Service Connection DT MNPT Connection ACME Length PRV PSIG PSIG PSIG PSIG Setting UL ASME /2 POL (CGA 510) 1-3/ J The Underground Multi-Service Valve with Integrated Evacuation Valve is designed for use in a single opening ASME container with a riser of 2-1/2 MNPT. A separate opening is NOT required for a liquid withdrawal valve. Internal threads accommodate 2-1/2 MNPT riser pipe connection and a 3/4 FNPT connection for the filling valve opening. Integrated liquid withdrawal valve in the body of the multi-service valve provides easy access. Double back check filler valve Vapor equalizing valve with excess flow Pressure relief valve with protective cap Plugged 1/4 FNPT gauge boss Filler Valves and CAVAGNA GROUP Tank Filler Wrench Propane Liquid Capacity at Various Differential Pressure (GPM) Connection Connection Hex Flat 10 PSIG 20 PSIG 25 PSIG 30 PSIG 40 PSIG 50 PSIG 75 PSIG /4 NPT 1-3/4 6 ACME Es. 46 mm /4 NPT 1-3/4 6 ACME Es. 46 mm DJ Service valve with Cavagna quality handwheel system Fixed liquid level gauge with 36 DT Double back-check filler valve with integral emergency shut-off ball valve Soft seated upper back check Metal-to-metal lower back check seat No need for filler hose adapter Safe filler valve maintenance without tank evacuation For use under or above ground

110 DOMESTIC TANK VALVES & ACCESSORIES DOMESTIC TANK VALVES & ACCESSORIES Vapor Equalization Valve CAVAGNA GROUP Tank Connection Filler Connection Wrench Hex Flat /4 MNPT 1-1/4 5 ACME Es. 32 mm The Vapor Equalization Valve is an upper back check valve and lower excess flow valve combined. Filler Valves with Overfill Prevention Device CAVAGNA GROUP Tank Connection Filler Connection Wrench Hex Flat /4 NPT 1-3/4 ACME 1-3/ /4 NPT 1-3/4 ACME 1-3/ /4 NPT 1/2 SAE 11/ /4 NPT 1/2 SAE 11/16 Tank Equipment Spare Parts - Rain Caps CAVAGNA GROUP The , , and are filler valves fitted with an OPD device are suitable for direct filling automotive applications. These valves incorporate a standard 1-1/4 flat wrenching hex allowing easy installation from the top with a socket wrench. NOTE: When ordering it is necessary to specify tank dimension, mount angle, and diameter to determine correct part number : Filler valve for vertical ASME and DOT containers. Suitable for a 300 liter horizontal tank or 119VG tank. They can be fitted to other tank sizes upon request. Spare Part For Valve , , , , , , , , , , , Plastic Plastic : Filler valve with OPD for Automotive Application and : Remote Filler valve with OPD for Automotive Application. NOTE: Cavagna declines all responsibility for incorrect use or application. They recommend using original parts or to replace the whole valve. J Plastic , , , Vinyl , , DJ Filler Valves with Overfill Prevention Device CAVAGNA GROUP Ug Wrench Kit and Valve Socket CAVAGNA GROUP Tank Connection Filler Connection Wrench Hex Flat /4 NPT 1-3/4 ACME 1-3/ /4 NPT 1-3/4 ACME 1-3/ /4 NPT 1-3/4 ACME 1-3/4 The , , and are designed for horizontal and vertical LPG containers. All the valves are equipped with an overfill prevention device. Always specify type of tank (horizontal or vertical), diameter of the tank and location of the filler valve in the flange of the tank C UG WRENCH KIT - Valve Socket - 3/4 Drive, Fits Cavagna Multiservice Valves for Asme Underground Propane Tank Valve Socket - 1/2 Drive, Fits Cavagna OPD Service Valves and Fork Lift Service Valves 51C Valve Socket : Suitable for underground tank. The extended body allows an easier refilling operation : Filler valve with high flow capacity suitable for above ground containers. Specify tank size when ordering : As with other valves that incorporate an OPD, this valve has, in addition, an extended filler valve with ball shut-off valve manually operated UG Wrench Kit

111 CYLINDERS CYLINDERS Cylinders MANCHESTER 1 Pound Refillable Propane Tanks FLAME KING J 5 lb. Cylinder 11 lb. Cylinder 20 lb. Cylinder Size/Pounds Service Material Valve CY414OPD 4-1/2 Vapor Steel OPD CY5OPD 5 Vapor Steel OPD CYAL6 6 Vapor Aluminum OPD CY10OPD 10-Tall Vapor Steel OPD CY11OPD 11-Short Vapor Steel OPD CY15MC 15 Vapor Steel Mower Cylinder LH Connector, Acme Fill, No Gauge CY20OPD 20 Vapor Steel OPD CY20SFG 20 Vapor Steel OPD and Sureflame Gauge CY20PL 20 Vapor Steel With Plumbers Pot Valve, OPD CYFL20 20 Liquid Steel Forklift w/coupler and Gauge CY20HOR 20 Vapor Steel Horizontal w/gauge OPD CY20BUF 20 Vapor Steel Verticle for Buffer Forklift w/coupler and Gauge CYAL20BUF 20 Vapor Alum. Buffer Verticle Only Forklift w/coupler and Gauge CY30OPD 30 Vapor Steel OPD CY30HOR 30 Vapor Steel Horizontal w/gauge OPD CY Liquid Steel Forklift w/coupler and Gauge CYAL Liquid Aluminum Forklift w/coupler and Gauge CYAL33.5FV 33.5 Liquid Aluminum Forklift w/coupler, Fill Valve and Gauge CYAL33.5MC 33.5 Vapor Aluminum Mower Cylinder LH Connector, Acme Fill, Gauge CY40OPD 40 Vapor Steel OPD CYAL40OPD 40 Vapor Aluminum OPD CY Liquid Steel Forklift w/coupler CYAL Liquid Aluminum Forklift w/coupler and Gauge CY50 50 Vapor Steel POL CY60 60 Vapor Steel POL CY Vapor Steel POL CY100L 100 Liquid Steel CGA555 Hopane CY100ASME 100 Vapor Steel POL and Gauge CY200DOT 200 Vapor Steel POL and Gauge CY200ASME 200 Vapor Steel POL and Gauge CY420DOT 420 Vapor Steel Multi-Valve Tankfoot tank stablizer part number A91725 is available to assist the consumer in transporting 20, 30 and 40 pound cylinders. Size/Pounds FLMKNG164LP 16.4 oz. Refillable Camping Tank 1 lb. FLMKNG141LP 14.1 oz. Industrial Camping Tank YSNEZF E-Z Fill 1 lb. Refill Valve for Forklift Tank Portable Cylinders FLAME KING Size/Pounds Tank Type Valve YSN lb. YSN lb. BBQ Propane YSN lb. OPD and/or POL Valve Assembly YSN lb. BBQ/Home Heating 20 lb. Cylinder 30 lb. Cylinder 40 lb. Cylinder 100 lb. Cylinder Buffer Tanks FLAME KING Size/Pounds YSN201BT 20 lb. For Floor Burnishers, Vapor Draw, QuickFill valve, NO OPD Forklift Tanks FLAME KING DJ Size/Pounds YSN lb. Steel Forklift Tank ASME Vapor Draw Fuel Tanks FLAME KING Size/Gallons YSN ASME Vapor Draw Fuel Tanks YSN Horizontal Mount with Brackets YSN lb. Cylinder 420 lb. Cylinder

112 CYLINDER VALVES CYLINDER VALVES Vapor Withdrawal Valves for Dot 100 LB. Cylinders Liquid Withdrawal Valves for Dot 100 LB. Cylinders s Container Relief Type STD PSI Vent Type Diptube MES-PVE3250BC-312 Service Vapor 3/4 NGT X F. POL (705 SCFM) ASME 312 N/A N/A MES-PVE3250C-375 Service Vapor 3/4 NGT X F. POL DOT 375 N/A N/A MES-PVE3250CV-435 Propylene Service Vapor 3/4 NGT X F. POL DOT 435 N/A N/A MES-PVE3250CLG-375 Service Vapor 3/4 NGT X F. POL DOT 375 MEJ401 N/A MES-PVE3250CLGV-435 Propylene Service Vapor 3/4 NGT X F. POL DOT 435 MEJ401 N/A MES-PVE3250CLGSC-375 Service Vapor 3/4 NGT X F. POL DOT 375 MEJ401SC N/A MES-PVE3250CLG-10.6 Service Vapor 3/4 NGT X F. POL DOT 375 MEJ MES-PVE3250CLGV-10.6 Propylene Service Vapor 3/4 NGT X F. POL DOT 435 MEJ MES-PVE3250CLGSC-10.6 Service Vapor 3/4 NGT X F. POL DOT 375 MEJ401SC 10.6 MES-PVE3250CLG-11.6 Service Vapor 3/4 NGT X F. POL DOT 375 MEJ MES-PVE3250CLGV-11.6 Propylene Service Vapor 3/4 NGT X F. POL DOT 435 MEJ MES-PVE3250CLGSC-11.6 Service Vapor 3/4 NGT X F. POL DOT 375 MEJ401SC 11.6 MES-PVE3250CLG LB. Vapor Service Valve Vapor Withdrawal Valves for Dot 100 LB. Cylinders are indended for use in vapor withdrawal service for DOT containers up to 100 lb. LPG capacity as fuel line shutoff valves in combination with a liquid fill and vapor relief valve. One piece forged brass body construction Easy to repair/replace bonnet assembly Integral 375 PSI relief valve (Propylene service PSI) Optional MEJ401SC self-cleaning LE fixed liquid level vent screw Heavy duty replaceable zinc hand wheel F. POL vapor outlet with shutoff Available in vapor seal construction for propylene service Diptubes can be cut to length for specific tank needs s Container Type Relief STD PSI Withdrawal Tube Width Vent Type MES-PVE3250CLM-375 Service Liquid 3/4 NGT X M. CGA555 DOT 375 1/4 MEJ401 N/A MES-PVE3250C-375 Service Liquid 3/4 NGT X M. CGA555 DOT 375 1/4 MEJ401SC N/A MES-PVE3250CV-435 Service Liquid 3/4 NGT X M. CGA555 DOT 435 1/4 MEJ MES-PVE3250CLMSC-11.6 Service Liquid 3/4 NGT X M. CGA555 DOT 375 1/4 MEJ401SC 11.6 Liquid Withdrawal Valves for Dot 100 LB. Cylinders are indended for use in liquid withdrawal service for DOT containers up to 100 lb. LPG capacity as fuel line shutoff valves in combination with a liquid fi ll and vapor relief valve. One piece forged brass body construction Easy to repair/replace bonnet assembly Integral 375 PSI relief valve Optional MEJ401SC self-cleaning LE fixed liquid level vent screw Heavy duty replaceable zinc hand wheel Male CGA555 liquid outlet with shutoff Integral 1.0 GPM/LPG excess flow valve Diptubes can be cut to length for specific tank needs Diptube MES-PVE3250CLG LB. Vapor Service Valve J DJ

113 CYLINDER VALVES CYLINDER VALVES Multi-Service Vapor Valves for Dot 200 LB. Cylinders Forklift Cylinder and Engine Fuel Valves Fill Connection Inlet Outlet Vent Type Diptube Length Relief STD PSI MES-PVE2030BC /4 ACME 3/4 NGT MES-PVE2030BCSC /4 ACME 3/4 NGT MEJ401SC MES-PVE2030BC /4 ACME 3/4 NGT MES-PVE2030BCSC /4 ACME 3/4 NGT F. POL MEJ401SC MES-PVE2030BC /4 ACME 3/4 NGT w/ Shutoff MES-PVE2030BCSC /4 ACME 3/4 NGT MEJ401SC MES-PVE2030BC /4 ACME 3/4 NGT MES-PVE2030BCSC /4 ACME 3/4 NGT MEJ401SC Excess Flow GPM ME9101P5 1.6 GPM 3/4 MNPT X 3/8 MNPT Forklift Service Valve ME9101P5H 2.6 GPM ME9101H4 1.6 GPM 3/4 MNPT X 3/8 M. Flare Motor Fuel Service Valve ME9101H6 2.6 GPM These Cylinder Valves are intended for vapor or liquid withdrawal service on DOT forklift or engine fuel containers. Two closing flow rates are offered GPM for medium to light duty vehicles and 2.6 GPM for those with greater fuel demands. MES-PVE2030BC Multi-Service Valve Multi-Service Vapor Valves for Dot 100 LB. Cylinders are intended for use in vapor withdrawal service for DOT containers up to 200 lb. LPG capacity as fuel line shutoff valves in combination with a fill and vapor relief valve. Ideal for on-site filling without interruption of service by combining all functions into a single 3/4 NPT tank opening. One piece forged brass body construction Easy to repair/replace bonnet assembly Integral 375 PSI relief valve Optional MEJ401SC self-cleaning LE fixed liquid level vent screw Heavy duty replaceable zinc hand wheel F. POL vapor outlet with shutoff Diptubes can be cut to length for specific tank needs Liquid splash tube to prevent liquid in vapor opening NOTE: These valves do not incorporate an integral pressure relief valve and are intended for use in containers that have a separate pressure relief valve to adequately handle the container s capacity. Each of these valves incorporate an excess flow valve at the tanks inlet end to prevent excessive product loss in the event of a downstream fuel line failure. For the excess flow device to perform properly the service valve must be in the full open and back seated position. One piece forged brass body construction Dual O-ring packing design Easy to repair/replace bonnet assembly Universal bonnet assembly Industry best fill flow rate Factory applied thread sealant Replaceable, heavy duty zinc hand wheel featuring a universal design ME9101P5H MEP125 This heavy duty designed wrench features a 1/2 drive socket extension for removing and installing motor fuel cylinder valves. Engine Fuel Remote Fill Valve J Accessories Cap and Lanyard ME /4 M. Acme x 1/2 M. Flare Remote Fill Valve w/cap and Lanyard ME Engine Fuel Remote Fill Valves are specifically designed for remote filling applications where a standard tank type filler valve is not practical. Perfectly suited for motor fuel applications or other hard to reach remote tank applications. This single check fill valve is designed to provide maximum product fill rates along with an automatic shutoff once product flow ceases. DJ Single check design allows maximum product flow rate Integral break away feature leaves check valve intact in the event of a vehicle roll away during filling Resilient bonded main valve seal Rear bulkhead mounting with quarter panel jam nut and lock washer Single piece main valve body for maximum strength and durability ME

114 CYLINDER VALVES CYLINDER VALVES Service Valves for DOT Fork Lift and ASME Motor Fuel Containers CAVAGNA GROUP Liquid Withdrawal Valves with Excess Flow CAVAGNA GROUP Container Connection Outlet Connection Normal Application Excess Flow Closing /8 SAE Flare (70) ASME Motor Fuel 3.3 GPM /8 SAE Flare (90) ASME Motor Fuel 3.3 GPM 3/4 M.NGT POL (CGA 510) ASME Motor Fuel 1.5 GPM /8 18 NPT DOT Fork Lift 2.6 GPM /4-14 NPT 5/8 UNF RV - Automotive 1.4 GPM These Service Valves are designed for vapor or liquid withdrawal service on DOT fork lift truck containers ( ) and ASME containers. All these valves are equipped with an excess flow limiter with different settings. Since these valves do not have an integrated pressure relief valve, they may only be used as an accessory valve on containers that have an independent PRV suitable for that container s capacity. All these valves are supplied with pre-applied sealant on the inlets. The has also pre-applied sealant on the outlet. Two O-rings form the stem seal for improved resistance to leakage due to dirt or temperature extremes. Container Outlet U.L. Closing Flow Wrench Connection Connection (Propane) Hex Flat /4 MNPT 5/8 FNPT 20 GPM 1-15/ /8 UNF 3/4 UNF /4 NPT 3/4 NPT 1-3/4 Withdrawal Valve is designed to liquid evacuation prior to moving the tank. This valve can also be used on permanent installations equipped with an excess flow limiter. Designed according to the latest UL standard. Withdrawal Valve performs as an excess flow valve. Adapter is to be used with a liquid withdrawal valve. It is fully compatible with the new evacuation valves on the market Tamper proof design Sturdy quality handwheel brass handle Static seat disc eliminates abrasive wear on the disc improving service life Recessed excess flow valve reduces the possibility of mechanical damage or fouling from excess pipe compound Service Valves for ASME, DOT Containers, & Fuel Line Application CAVAGNA GROUP Tank Vapor Service Fixed Liquid Fixed Level Connection Connection Level Gauge Gauge DT Length J Not captive /4 NGT POL CGA Not captive DJ Fork Lift DOT Multivalve CAVAGNA GROUP Inlet Outlet Application M 34 3/8-18 NPT Dot Fork Lift Cavagna Group s is designed specifically as a One-Hole solution for composite LPG cylinders in DOT fork lift truck service. This One-Hole solution has fewer points for potential leaks. This valve has multi-functions acting as a PRD and Excess Flow Valve. Its straight threads reduce torque force into the composite cylinder wall. Service Valve was created especially for vapor withdrawal service on ASME and DOT containers. Since this valve has no integral pressure relief valve, it may only be used as an accessory valve on containers that have an independent pressure relief valve sufficient for that container s capacity. This valve can also be used as a service valve on a 420 lb. vertical tank or a 300 liter horizontal tank. This valve also incorporates a fixed liquid level gauge. Specify DT length when ordering. Valve is an open-close valve with POL outlet and is designed for vapor withdrawal only. Double O-ring stem seal Sturdy quality handwheel brass handle Static seat disc eliminates abrasive wear on the disc improving service life

115 CYLINDER VALVES CYLINDER VALVES ACCESSORIES Service Valves for DOT Cylinders CAVAGNA GROUP Cylinder Collars Cylinder Outlet Normal Liquid DT Relief UL Rated Discharge Connection Connection Application Level Gauge Length Setting Flow Capacity (SCFM) Female DOT cylinder up to 100 lb. Yes /4 NGT POL Service valve on DOT cylinder Yes (CGA 510) DOT cylinder up to 100 lb. No Service Valve is a DOT cylinder valve for vapor withdrawal up to 100 lb. LPG capacity. Specify dip-tube length when ordering. Service Valve is a heavy duty POL valve with pressure relief valve for 200 lb. propane cylinders. Different DT length. 765 Size *Multi-Valve ME312-5MV 3-1/8 Yes ME /2 No ME350MV 3-1/2 Yes * Multi-valve style features cut-out in thread to provide clearance for assembly over a container valve. Steel propane cylinder collars are designed to protect the valve installed on a cylinder. An automotive grade powder coat finish provides maximum corrosion resistance. WARNING: It is illegal to fill a tank without a protective collar. Without a protective collar serious damage can occur to the cylinder valve which can lead to catastrophic events such as the tank becoming a dangerous projectile, an explosion and/or fire causing property damage, or personal injury or death. ME350 ME350MV Cylinder Valve Wrenches Type 1 Acme Cylinder Valve with Overfill Prevention Device (OPD) CAVAGNA GROUP Cylinder Container Outlet Relief Dip Capacity Connection Connection Setting Tube lb lb. 3/4 14 NGT Type 1 ACME and POL 375 PSIG lb. 6.4 Thread Style MEP121 Male POL POL MEP /16 Female Acme Type I (QCC)/ OPD Designed to remove or install Type I (QCC)/OPD cylinder valves or POL service valves without damage to the valve base. MEP121 J LPG Valve Type 1 Overfill Prevention Device Type 1 Acme Cylinder Valves are intended for DOT cylinders up to 40 pounds LPG capacity (96 pounds water capacity). This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). Rapidly purges and fills; over one million BTU withdrawal capacity Tri-lobular one-piece forged aluminum handwheel Leak resistance double O-ring stem seal Pre-applied Ever-Seal sealant O-ring check valve seat opens only with positive seal Upward spray filling eliminates premature shutoffs Steel safety cage surrounding critical welds provides additional protection to components MEP122 DJ

116 SAFETY EQUIPMENT SAFETY EQUIPMENT Decals and Signs Decals and Signs AA16/AA16 ROLL 2N1 SP53R A16 Custom Imprinted DOT Cylinder Labels Minimum Order 3500 AA16 DOT Cylinder Labels - Minimum Order 100 AA16ROLL DOT Cylinder Labels 500 Per Roll 2N1 For All Portable Cylinders Per Roll DOT 1075 / Warning ANSI / MFPA Pamphlet 58 V56R 3 in 1 Hazardous Material Label, 10 x 3-1/2 SP53R Warning Label, 3 Valves Black on Yellow P-101 Water Capacity Chart P102 Notice for Your Safety P-206 Cylinder Filling Instructions (ASME/DOT) - Poly V206 Cylinder Filling Instructions (ASME/DOT) - Vinyl V14 Cylinder Exchange Check List - Vinyl C37 Cylinder Exchange Check List - Coroplast P111 OPD Sign - Does your valve look like this P-114 OPD Retrofit Guide PMICH No Smoking - No Open Flame.. Warning: Filling the following V128 This Container is NOT Equipped with an OPD (For Horizontal Cylinders) RIN LABEL RIN DOT Cylinder Decal Label 50 Per Roll CUSTOM RIN RIN DOT Cylinder Decal Label 500 Per Roll M1075 Magnetic Diamond Placard LPG P1075 Plastic Placard Diamond LPG, Works with MPH69 Holder S1075 Scotchlite Reflective 1075 Decals V1075 Vinyl Placard Diamond Decal LPG MPH69 Placard Holder CG126FO Flip Placard Assembly Metal Frame 81-CLIP Stainless Steel Clip for CG126FO Metal Placard V83 Shipping Paper One Truck V83-CYL Shipping Paper for Cylinder Truck V83-TANK Shipping Paper One Storage Tank VDOT Operating Under 49 CFR White on Black Decal S22B 4 x 36 We Stop at all Railroad (RR) Crossings Decal S22C 8 x 12 We Stop at all Railroad (RR) Crossings Decal S500 3 x 5 Black Diamond PROPANE Decal HZ116 OSHA Commercial Cylinder Decal PROPANE SMV7 Slow Moving Vehicle Decal V92 Liquid/Clutch/PTO/Bypass Decal V8 Vapor/Relief/Liquid Decal V45 Valve ID Label Set 10 x 10 Decal V65 QT Decal V66 NQT Decal V31 HM-183 Annual Inspection Decal Kit V32 HM Yr. Inspection Decal Kit V33 Number Sheet Only for V31 and V32 Decal V90-5 Liquid Five Per Sheet 1 x 4 Decal V91-5 Vapor Five Per Sheet 1 x 4 Vinyl Decal V58C LPG Octane Label 2-1/2 x 3 Decal V75-20 Container Shutoff Decal V75-20 Tag Container Shut Off Warning Tag S500 M1075, P1075, S1075, V1075 SMV7 CG126FO V90-5 V91-5 V92 MPH69 C37 P102 K V56R V83-CYL NO OF CYLINDERS V-83 ONE TRUCK LOAD V83-TANK ONE STORAGE TANK HZ116 V45 K V32 V65 V66 P-206/V206 P114 P-101 S22B V8 V31 S22C

117 SAFETY EQUIPMENT SAFETY EQUIPMENT Decals and Signs Decals and Signs V24A / V24BB / V24C V17B / V17C V28A / V28B / V28BB / V28C V288BB V23A / V23BB / V23B M23BB / V23C M97A 2 x 4 Aluminum Single Faced PROPANE FILLING STATION M97AD 2 x 4 Aluminum Double Faced PROPANE FILLING STATION M97AX 2 x 4 Aluminum Single Faced PROPANE CYLINDERS EXCHANGED M97AXD 2 x 4 Aluminum Double Faced PROPANE CYLINDERS EXCHANGED M97FR 2 x 4 Frame for Metal Signs V24A 6 Flammable Decal V24BB 3 Flammable Decal V24C 2 Flammable Decal V17B 4 Flammable Gas Vinyl Decal V17C 2 Flammable Gas Vinyl Decal V52 11 Flammable Gas Diamond Decal Red with White Letters, Class 2 V52S 4 Flammable Gas Diamond Decal Red with White Letters, Class 2 V28A Propane 6 Letters Decal V28B Propane 4 Letters Decal V28BB Propane 3 Letters Decal V28C Propane 2 Letters Decal V288BB Propane Gas 3 Letters Decal V39B 12 x 18 No Smoking or Open Flames 25 Decal M39B 12 x 18 Metal No Smoking Within 25 ft. V26A 12 x 18 No Smoking/Shut Off Motor Decal V23A 6 No Smoking Decal V23BB 3 No Smoking Decal V23B 4 No Smoking Decal M23BB 3 No Smoking on Metal V23C 2 No Smoking Decal V21 Concerned for Your Safety Cylinder Filling Decal V121 Port Cylinder Fill Instructions Decal P13 Emergency Contact # s 18 x 24 P148 Plastic Sign Liquid Valve Emergency Shut Off Pull to Close 10 x 12 P149 Plastic Sign Liquid Valve Emergency Shut Off Push to Close 10 x 12 V81 Vinyl Sign Emergency Shut Off Pull to Close 10 x 12 V126 Vinyl Decal Emergency Shut Off Pull to Close 5 X 6 V129 Vinyl Decal Emergency Shut Off Push to Close 5 x 6 V302BB 3 Liquid Petroleum Gas Vinyl Decal V302C 2 Liquid Petroleum Gas Vinyl Decal V2A 2 Anhydrous Ammonia Vinyl Decal V5 4 Anhydrous Ammonia (Straight) Decal V5A 4 Anhydrous Ammonia (Curved) Decal V2B 2 Vinyl Inhalation Hazard Decal V1005 NH 3 Placard Diamond Vinyl Decal Green Stick on Diamond 1005 V41 2 Liquified - Green Letters Decal OSHA Diamond 7-1/2 X 7-1/2 Propane Decal OSHA Diamond 15 X 15 Propane Decal V30 Tank Filling Instructions 15 X 22 Motor Fuel Decal 7282Q Methanol Warning Decal 3 x 5 V1203 UN 1203 Gasoline Diamond Decal Placard V50 3N1 DOT Decal for Ragasco Forklift Cylinder V5 V81 / V126 V129 P148 P149 M97A M97AD M97AX M97AXD V52 V2A V50 K V39B/M39B V2B K V / V1005 V21 C37 V26A V302BB / V302C

118 SAFETY EQUIPMENT SAFETY EQUIPMENT Pressure Gauge Snubbers Hose Barbs ME-LD2 ME202SS ME204 ME-LD02 ME-LD16 Material Style Inlet (MNPT) Outlet (FNPT) ME202 Brass #54 Orifice ME202SS Stainless Steel #54 Orifice 1/4 1/4 ME204 Brass Sintered Metal Filter Disc Snubbers are designed for a pressure gauge to be threaded into their outlet. The snubber will reduce pressure fluctuations that can over pressurize or damage the gauge while maintaining a quick response time and a steady reading. Low Temperature Leak Detector Size ME-LD02 2 oz Marshall Excelsior Leak Detector Spray Bottle ME-LD1 8 oz Marshall Excelsior Leak Detector Cap and Dauber ME-LD16 16 oz Marshall Excelsior Leak Detector Cap and Brush ME-LD2 1 gal Marshall Excelsior Leak Detector WIN EMPTY 8OZ 8 oz Sherlock 5-Second Leak Detector Cap and Dauber WIN EMPTY PT 16 oz Sherlock 5-Second Leak Detector Spray Bottle WIN GALLON LD 1 gal Sherlock 5-Second Leak Detector Low Temperature Leak Detector is for all pressurized gases and designed to detect joint leaks within 5 seconds of proper application at temperatures down to -40 F. Brass Steel* Four Barb Seven Barb Four Barb Four Low High with 3/64 Barb Pressure Pressure Orifice Hole Hose I.D. Threads ME4631 1/4 1/8 FNPT ME4632 ME5632 1/4 1/4 FNPT ME4633 ME5633 1/4 3/8 FNPT ME4652 3/8 1/4 FNPT ME4653 ME5653 3/8 3/8 FNPT ME4654 3/8 1/2 FNPT ME4231 ME5231 1/4 1/8 MNPT ME4232 ME5232 1/4 1/4 MNPT ME4233 ME5233 1/4 3/8 MNPT A6132 A6133 3/8 1/8 MNPT ME4252 A1132 A1133 3/8 1/4 MNPT ME4253 ME5253 3/8 3/8 MNPT ME4254 3/8 1/2 MNPT A6138 A6139 1/2 1/8 MNPT A1138 A1139 1/2 1/4 MNPT ME4273 1/2 3/8 MNPT ME4274 ME5274 1/2 1/2 MNPT ME4293 5/8 3/8 MNPT ME4835 ME5835 1/4 3/8 Male Flare ME4855 3/8 3/8 Male Flare ME4857 3/8 1/2 Male Flare ME5133 1/4 1/4 Male Inverted Flare ME4333 1/4 1/4 Female Flare Swivel ME5334 ME43352 ME5335 1/4 3/8 Female Flare Swivel ME4355 ME ME5355 3/8 3/8 Female Flare Swivel ME4357 ME5357 3/8 1/2 Female Flare Swivel ME43774 ME5377 1/2 1/2 Female Flare Swivel ME4652 ME5632 ME5233 ME4252 A1132 ME4835 ME5133 *Rated for LP-Gas and NH 3 2 ME (barb only); ME (nut only) 3 ME (barb only); ME (nut only) 4 ME (barb only); ME (nut only) 5 ME (barb only) 6 Forged Nut ME5335 K Win Empty 16 oz. Hose Ferrules & Hose Menders Hose Ferrules I.D. OAL ME ME ME ME ME Hose Ferrules I.D. OAL ME ME ME ME ME Hose Menders Hose I.D. ME27C 1/4 x 1/4 ME27E 3/8 x 3/8 K Winton Gallon ME27C Winton Empty ME7327 ME27E

119 SAFETY EQUIPMENT SAFETY EQUIPMENT High Pressure Test Blocks Serviceman s Friend Inlet Outlet PSIG Factory Installed Vent Valve MEJ600 Male Hard Nose POL Female POL No MEJ601 Male Hard Nose POL Female POL Yes MEJ601-WOG* Male Hard Nose POL Female POL Yes Connection Connection METL051 5/16-32 Male / 1/8 MNPT / 1/2 MNPT Standard test hose fitting/1/8 MNPT METL052 5/16-32 Male / 1/8 MNPT / 1/4 MNPT Standard test hose fitting/1/8 MNPT METL051 MEJ600 * Without gauge High Pressure Test Blocks test high pressure lines downstream of the container valve for system leaks. The optional bleeder valve enables the line pressure to be adjusted to the desired test pressure. METL051 and METL052 Adapters eliminate the hassle of carrying numerous bushing and fittings to job sites. These adapters have three threads on one end with a hose barb and an 1/8 MNPT on the other end. A hose can easily be attached to either end and can be connected to a manometer or other flow meters to check line pressure on an appliance. ME1332 Low Pressure Test Block Inlet PSIG MEJ601 MEJ610/ MEJ610/ /4 FNPT MEJ610/ MEJ610/ Low Pressure Test Kits Kit with Case Gauge and Gauge and Gauge and Adjustable Manometer Hose Hose Barb 1/4 MNPT Gauge Adapter Only Connection Connection ME60P-2 ME60P-5 ME60-2 Yes ME1328 (3/8 OD) ME1331 (1/2 OD) ME50P-2 ME50P-5 ME50-2 ME No ME1332 (5/8 OD) Marshall s Test Blocks are designed to test low pressure lines for system leaks. The factory installed check valve allows the line to be pressurized and adjusted to the desired test pressure. MEJ610/30 ME50-2 Low Pressure Test Kits are used to check for gas leaks by verifying the line pressure of an appliance. Each kit includes a case, gauge, and rubber hose with a bell on the end. TEST KIT Capacity 0-35 water column Three foot rubber hose with bell Adjustable gauge models can be reset to zero with provided screwdriver Pressure Test Gauge Inlet Outlet PSIG Factory Installed Vent Valve MEJ602* MEJ603LP 1/4 MNPT 1/4 FNPT 0-15 Yes MEJ603HP * Without gauge K Reliable method to test high and low pressure tap installations Provides an effective method to bleed vapor for pressure equalization and more accurate gauge readings Allows for an effective method to bleed vapor from the testing equipment prior to disconnect High quality liquid filled pressure gauge MEJ603HP K ME50P-5 ME50P-2 ME60P

120 SAFETY EQUIPMENT SAFETY EQUIPMENT Gauge Assemblies Leak Check and Regulator Testing Kits TG30A or TG30B TG30A TG30B KVA KVB SKVA SKVB Single Point Gauge Assembly - 30 PSIG Gauge Single Point Gauge Assembly - 30 PSIG Gauge Gauge Assembly with 30 PSI Gauge and Built-In Regulator with Type A Valves Gauge Assembly with 30 PSI Gauge and Built-In Regulator with Type B Valves Gauge Assembly with 35 W.C. Gauge and Built-In Regulator with Type A Valves Gauge Assembly with 35 W.C. Gauge and Built-In Regulator with Type B Valves QTG127A QTG128B QTG16A QTG16B SQTG4A SQTG4B Dual Gauge Leak Check Kit - 30 and 300 PSI Gauges with Type A Valves Dual Gauge Leak Check Kit - 30 and 300 PSI Gauges with Type B Valves Dual Gauge Leak Check Kit - 30 PSI and 35 Water Column Gauges w/ Type A Valves Dual Gauge Leak Check Kit - 30 PSI and 35 Water Column Gauges w/ Type B Valves Four Gauge Kits (Includes 5, 30, and 300 PSI Gauges) with Type A Valves Four Gauge Kits (Includes 5, 30, and 300 PSI Gauges) with Type B Valves Koch & Associates Gauge Assemblies TG and QTG Series are intended for bobtail drivers who are trained to conduct out of gas leak check tests. The SQTG Series gauge assembly give the service technician what is needed to test pressure regulators for flow set point and lock-up pressure in addition to leak check testing. Koch & Associates s Test Kit KV Series is intended for bobtail drivers who are trained to conduct out of gas leak check tests. The SKV series test kit is intended for service technicians, which gives them the ability to test pressure regulators for flow set point and lock-up pressure in addition to leak check testing. QTG127A or QTG128B KVB NOTE: Model number suffix A or B designates which type of pressure tap valve will be used. The A designates the type VA valve (Schrader) and B designates the type VB valve (1/4 flare). NOTE: Model number suffix A or B designates which type of pressure tap valve will be used. The A designates the type VA valve (Schrader) and B designates the type VB valve (1/4 flare). ME-SKVA or ME-SKVB TG30A and TG30B Single Point Gauge Assemblies come with a 30 PSIG gauge and are used for leak check tests at intermediate pressure at outlet of first stage regulator or inlet to second stage regulator. KVA and KVB Multi Point Kits are gauge assemblies with 30 PSI gauges and built in regulators that limit the pressure to the gauge to 12 PSI so the gauge can be used for leak check testing at intermediate pressure taps or at tank pressure using the high pressure test block. Kit includes twelve 1/8 NPT valves and six 1/4 NPT pressure tap valves. SKVA and SKVB Universal Kits are gauge assemblies with 35 W.C. gauges and built-in regulators that limit the pressure to the gauge to 22 W.C. so the gauge can be used for leak check testing anywhere in the system. It can also be used to measure second stage, low pressure regulator set point and lock up pressure or appliance manifold pressure. Kit includes twelve 1/8 npt and six 1/4 npt pressure tap valves. QTG127A and QTG128B Dual Gauge Kits are used for leak check tests at intermediate pressure using the 30 PSI gauge and also leak check tests at tank pressure using the 300 PSI gauge and the high pressure test block supplied with the kit. The hose assembly connection to the system pressure tap valve incorporates a quick disconnect fitting to either pressure gauge. Kit includes six pressure tap valves, either type A or type B depending on which kit is specified. QTG16A and QTG16B Dual Gauge Kits are used for leak check test at intermediate pressure using the 30 PSI gauge and testing first stage regulator. The 35 water column gauge is used for testing low pressure second stage regulator set point and lock up pressure. SQTG4A and SQTG4B Four Gauge Kits include a 30 PSI gauge, a 300 PSI gauge, a 5 PSI gauge, a 35 water column gauge, and a high pressure test block plus six pressure tape valves either type A or type B depending on which kit is specified. The hose quick disconnect allows for attachment of any one of the gauges. A leak check pressure tap valve can be anywhere in the system with the proper gauge attached for leak check testing. This kit also allows the service technician to test all pressure regulators, including the first stage, using the 30 PSI gauge, a 2 PSI regulator using the 5 PSI gauge, and low pressure 11 W.C. regulators or appliance manifold pressure using the 35 WC gauge. ME-QTG16B SQTG4A or SQTG4B K SKVA or SKVB K Gauge Assembly Valves VA1 VA1/VA2 VB1 VB2 HAS/HSB VA1 VA2 VB1 VB2 HSA HSB 1/8 MNPT Valve 1/4 MNPT Valve 1/8 MNPT Valve 1/4 MNPT Valve Hose Swivel Connector to Type VA Valve Hose Swivel Connector to type VB Valve

121 SAFETY EQUIPMENT SAFETY EQUIPMENT Pressure Test Accessories Dwyer U-Tube Manometer ME295-1 MEJ595 With Without Connection Connection Plug Plug Port Hole with #54 Orifice ME295 ME295-1 Male Hard Nose POL Female POL 1/8 FNPT ME295SN ME295SN-1 Male Soft Nose POL Female POL 1/8 FNPT ME296 ME /4 MNPT 1/4 FNPT 1/8 FNPT ME297 ME /8 MNPT 3/8 FNPT 1/8 FNPT ME298 ME /2 MNPT 1/2 FNPT 1/8 FNPT MEJ595 1/2 MNPT 1/2 FNPT 1/4 FNPT (No Orifice) ME299 ME /4 MNPT 3/4 FNPT 1/8 FNPT Connection Connection MEJ604 1/4 FNPT 1/8 MNPT Extension U-Tube Manometer A126 3/4 oz. Replacement Green Dye D Oil Filled U-Tube Manometer A101 3/4 oz. Red Gauge Oil A102 4 oz. Red Gauge Oil A201 3 Tubing with Replacement Bell End A319 Flexible Red PVC Connector for 1222 Manometer Dwyer U-Tube Manometer are to be attached to a vertical steel surface with magnets behind scale. If necessary, attach using screws and bolts. A hose included with the manometer ME296-1 MEJ604 Marshall s Accessories provide an inexpensive way to permanently install a pressure tap upstream or downstream from the first stage regulator. The #54 orifice port provides controlled line pressure for more accurate readings and protects test equipment from pressure spikes while allowing easy installation of pressure test monitoring devices. Pressure Test Accessories Dwyer U-Tube Manometer Kit - Series Slack Tube Manometer A Case A126 3/4 oz. Green Replacement Dye A201 3 Tubing with Replacement Bell End 1D4976 Rubber Bell Adapter 1212 KIT Adapter Kit A339 Brass Adapter 1/8 MPT x 1/8 Barb MEJ608B-02 Connection Connection Thread Sealant MEJ /4 MNPT No MEJ /8 MNPT 5/16-32 Male No MEJ608B-02 1/8 MNPT Yes 1211 Rubber tubing adapter to fit standard 7/16 diameter spud 3 ft length 3/16 rubber tubing (Enlarged) Connection Connection ME10BTK /8 FNPT 5/16-32 Female 3/4 oz. Bottle Fluorescein green color concentrate with wetting agent MEJ608B-02 Check Valve allows the line to be pressurized and adjusted to the desired pressure through the same valve. Manometer - EM151 K ME10BTK-1-01 NOTE: To help eliminate valve failure, the valve cap should remain on the valve when line is not being pressurized or adjusted. Any dirt, debris, water or other contaminants can potentially jam the valve or compromise the sealing surface causing the valve to leak. Pressure Test Flexible Rubber Pigtail (1/4 Hose ID) Connection Connection Thread Sealant MER /8 MNPT 1/4 FNPT MER EM151 Electric Manometer with Hose Measures pressure to 20 Water Column with.05 resolution Rugged rubberized case with built-in magnet Simple two button operation Over pressure protection Auto reset feature Auto power off after 5 minutes no activity Battery life 50 hours with alkaline battery Optional AC319 soft sided carrying case available K Flexible Rubber Pigtails are for hard to reach places and intended for first stage regulators with pressure taps in either upstream or downstream positions. EM151 MER432 Series

122 SAFETY EQUIPMENT SAFETY EQUIPMENT CO71 Gas Detectors CO71 CD100A CD200 LPKITPLUS Hand Held Carbon Monoxide Detector Combustible Gas Leak Detector Combustible Gas Leak Detector Complete LP Diagnostic Kit Carbon Monoxide Detector CO71 detects CO levels from 0 to 999 ppm. Its tri-color warning indicates three concentration levels. When dangerous CO levels are reached an audible alert sounds. This device is handheld and powered by a 9V battery. CO71A CARBON MONOXIDE DETECTOR Preset alarms with 3-color warning light CO detection to 999 ppm and audible alert Backlit display MAX capture One button auto zero Low battery indicator EM151 ELECTRONIC MANOMETER Single input to measure positive and Measures in inches water gauge negative pressure to 20 wg Auto power-off after 5 minutes of no activity Ruggedized, including rubber boot with integral magnet LPKITPLUS The CD100A is designed to detect combustible gas leaks in residential and small commercial applications. Semiconductor sensor responds instantaneously to all combustible gases. The easily adjusted, steady tic rate can be used in tight quarters where others might not fit. 50 ppm minimum detection Easy one hand operation Long 18 gooseneck Sensor provides accurate detection Tip light in sensor cover illuminates the area of the leak Audio and visual tic rate, fully adjustable Headphone jack Magnehelic Gauges 2020 Magnehelic Gauge 0-20 WC w/case and Access (2 Boxes) 2020LT Magnehelic Gauge 0-20 WC Low Temp to -20F w/case and Acc (2 Boxes) A432 Case and Accessories for 2020 Magnehelic Gauge 2020 CD100A The CD200 has a long, slim gooseneck probe and a bright LED tip light to find combustible gas leaks in tight areas. Its adjustable alarm, easy one-hand operation and impact resistant storage case add up to value and convenience. 50 ppm minimum detection Adjustable tick rate to locate leaks quickly and easily Visual leak detection by LED indicators Long 18 gooseneck Separate user adjustable alarm for predetermined level detection Precision sensor detects the smallest leaks Red LED located on the tip to illuminate search area Fast response of less than two seconds to 40% LEL Includes earphone Service Equipment - Pipe Thread Sealant PB04 1/4 Pint Gasiola PLS 2 Premium Thread and Gasket Sealer with Teflon Brush SS04 1/4 Pint Gasiola Soft-Set Thread Sealant with Teflon Brush Top SS08 1/2 Pint Gasiola Soft-Set Thread Sealant with Teflon Brush Top SS16 1 Pint Gasiola Soft-Set Thread Sealant with Teflon Brush Top NT08 1/2 Pint Gasiola Non Teflon Blue Pipe Sealant with Brush Top NT16 1 Pint Gasiola Non Teflon Blue Pipe Sealant with Brush Top SS04 K CD200 The LPKITPLUS is the complete tank to inside appliance test kit for installers and service technicians. Checks primary/secondary gas pressure, verify fittings are leak free, and tests for CO levels in the living space. Kit includes CD100A Combustible Gas Leak Detector, CO71A Carbon Monoxide Detector, and the EM151 Electronic Manometer. CD100A COMBUSTIBLE GAS LEAK DETECTOR Simple adjustable tic rate Sensor provides accurate detection PB04 K Easy one hand operation Audio and visual tic rate Long 18 gooseneck Headphone jack Tip light in sensor cover illuminates the area of the leak

123 SAFETY EQUIPMENT SAFETY EQUIPMENT Anode Bags Lock Caps and POL Locks (continued) #17 17# 17 lb. Magnesium Anode Bag with 13 of No. 12 Lead Wire Attached, 1 for 500 Gallon Tank, 2 for 1,000 Gallon Tank 5# 5 lb. Magnesium Anode Bag with 13 of No. 12 Lead Wire Attached, Generally Used for Piping 9# 9 lb. Magnesium Anode Bag with 13 of No. 12 Lead Wire Attached, Generally Used for Piping All brass body for maximum durability Locking mechanism and key features durable chrome plating Locking mechanism swivels 360 when installed to prevent tampering or removal Locking mechanism cannot be removed without key Universal key for all sizes and styles ME531 Series Cathodic Protection Equipment Copper Sulfate Crystals 6A Copper Sulfate Half Cell Tester Sulfate Crystals Copper Sulfate Crystals - 12 oz. Bottle Lug Copper Anode Lug for Attaching Anode to Tank Anode Test Kit Complete Kit - Digital Multimeter, Copper Sulfate Half Cell and Copper Sulfate Crystals RE-5 Electrode Flat Surface Ceramic Plug for General Use on Soil Surfaces, 1-3/8 x 6 Anode Extension Lead Red 12 ft. Extension Lead for Multi Meter MCM Telescoping Ball Top Anode Test Rod with Meter Adapter Plate DM200 Digital Multi Meter with Leads, 600 Volts AC/DC AC504 Carrying Case - 3 Place, Hard Sided ME530PL ME540-KA, ME540-KD ME532 Series ME530, ME ME533 Scales Anode Test Kit RE-5C Electrode Anode Test Rod MCM Capacity Platform Dimensions Shipping Weight 1100 Fairbanks Portable Utility Scale 1000 lb. 23-1/2 x 17-3/4 49 h x 21 w 175 lb Fairbanks Portable Beam Scale 1000 lb. 17-3/4 x 23-1/2 42-3/4 h 175 lb. 854F100P Detecto Portable Platform Scale 1000 lb. 19 x h x 24 w 132 lb Detecto Platform Bench Scale 350 lb. 10-1/2 x 14-1/2 27 h 46 lb. Lock Caps and POL Locks K ME530 Saf-T-Lok Male POL Lock ME Saf-T-Lok Key for POL, Pipe and Barrell Locks ME530PL Saf-T-Lok, Male POL Lock with Padlock Cap, Soft Nose ME Locking Pipe Cap 1/2 FNPT ME Locking Pipe Cap 3/4 FNPT ME Locking Flare Plug 3/8 ME Locking Flare Plug 1/2 ME533 Locking Acme Cap 1-3/4 ME540 Hose End and Quick Acting Valve Lock - Use with ME540P ME540P-KA Master Padlock with 2-1/2 Deep Shackle - Keyed Alike ME540P-KD Master Padlock with 2-1/2 Deep Shackle - Keyed Differently K ME540, ME540-KA Safe-T-Locks are designed to prevent tampering, product theft and/or accidental discharge of product. Fits any size tank valve with a POL or 1-3/4 Acme connection or gas plumbing. To install, securely screw the plug or cap to the valving or plumbing using the appropriate wrench. Snap locking mechanism into place over plug or cap. Locking mechanism will cover the installation hex or knurl and swivel freely until key is inserted and the lock is removed. Fairbanks Series 1100 Fairbanks Series 1124 Detecto 854F100P Detecto

124 SAFETY EQUIPMENT TOOLS & ACCESSORIES Scale Parts Flairing Tools 50 lb. Test Weight 55441BI Beam insert by Fairbanks, lb. x 1/2 lb., (set of 2) Counter Poise by Fairbanks 6P10021X Counter Poise by Detecto lb. Counter Poise Weight by Fairbanks lb. Counter Poise Weight by Fairbanks lb. Counter Poise Weight by Fairbanks 6PP100X 100 lb. Counter Poise Weight by Detecto 6PP200X 200 lb. Counter Poise Weight by Detecto 6PP500X 400 lb. Counter Poise Weight by Detecto C lb. Test Weight by Fairbanks 110-C006-0A 50 lb. Test Weight by Detecto 945TH Parker Rolo-Flair Flairing Tool Rolo-Flair Flairing Tool 945TH is a single handle, automatic depth guage, that burnishes and flares in one motion. Pipe Cutters 945TH TOOLS & ACCESSORIES Serviceman s Replacement Seal Kit 512 Rothenberger 3/16 Thru 1-1/8 Tubing Cutter with Reamer Rothenberger Replacement Cutter Wheel for 512 Replacement MEW1 Serviceman s Replacement Seal Kit Includes: Qty MEW1 MEW4 1-1/4 Acme Motor Fuel Flat Gasket 9 MEW3 1-1/4 Acme Flat Gasket 10 MEW2 1-3/4 Acme Flat Gasket 10 MEW5 2-1/4 Acme Flat Gasket 10 MEW6 3-1/4 Acme Flat Gasket 10 ME220M-02 Male Motor Fuel Connector O-ring POL O-ring Durable ABS plastic container with storage latch Labeled with each gasket/o-ring size and part number for easy identification and reorder purposes Preformed insert with individual spaces for each gasket/o-ring size All gaskets/o-rings manufactured from UL Listed approved compounds for LP-Gas and NH 3 services Pipe Wrench Size RID RID RID Alum Heavy Duty Straight Pipe Wrench RID RID RID RID RID Steel Heavy Duty Straight Pipe Wrench RID RID K MEW1 Layout Channel Lock Tongue and Groove Pliers # /2, 5 Adjustments, 1-1/2 Capacity #440 12, 7 Adjustments, 2-1/4 Capacity #460 16, 8 Adjustments, 4-1/4 Capacity L NOTE: Right angle teeth grip in all directions. Undercut tongue and groove won t slip. Patented reinforced edge. Channel lock blue comfort grip. #460 L

125 TOOLS & ACCESSORIES TOOLS & ACCESSORIES Channellock Adjustable Wrenches Methanol Injectors #815 #808 8 Wrench, Capacity 15/16 # Wrench, Capacity 1-3/16 # Wrench, Capacity 1-3/8 # Wrench, Capacity 1-3/4 Measurement scales on jaws ideal to determine size of nuts, pipe, etc. Chrome vanadium steel construction Ergonomic handle, non protruding jaw MEP700 MEP Marshall Excelsior Complete Vapor Return Methanol Injector Marshall Excelsior Injector Body Only Marshall Excelsior s Methanol Injector MEP700 is gravity fed and provides a fast and efficient method to inject methanol into stationary ASME containers to help prevent condensation from freezing in the propane system. WARNING: Never attempt to refill the MEP700 injector with methanol while connected to a propane container. In order for the tank and methanol injector vapor equalization to occur, no more than 42 ounces of methanol can be contained within the methanol injector. MEP700 Heavy Duty Acme Spanner Wrenches Length MEP120C EZ-Turn Ergonomic Aluminum Acme spanner wrench for 3-1/4 female Acme caps 13-3/4 MEP120B Aluminum Acme spanner wrench for 1-3/4, 2-1/4, 3-1/4 and 4-1/4 female Acme caps 17-1/2 MEP /4 female acme vapor connection Spark resistant brass connectors and valve Durable steel construction body Automotive grade powder coat finish for maximum corrosion resistance Gloves For use with all multi-valve applications or where vapor recovery systems are in place Maximum capacity = 42 ounces Maximum pressure = 250 PSIG MEP120C Size Color Lg Orange Textured Monkey Grip Glove, Coated Safety Cuff, Insulated Lg Orange Smooth Monkey Grip Glove, Fully Coated Safety Cuff, Foam Insulated Med Brown/Yellow Winter TUF-DUK Vinyl Glove 9-MED Foam Insulated, Driver s Style Lg Brown/Yellow Winter TUF-DUK Vinyl Glove 10-LRG Foam Insulated, Driver s Style MEP120B Infinite Lighters INF Flexlight Infinite Lighter INF Flexlight L L

126 OUTDOOR & CAMPING ACCESSORIES OUTDOOR & CAMPING ACCESSORIES Camping Tees Camping Elbows and Assemblies M Packaged Inlet Auxiliary Inlet Outlet Outlet ME /16 Female Acme 1-20 Male ME413 ME413P* #60 Male Soft Nose POL 1-20 Male w/round Brass Handwheel 1-20 Male ME415 ME415P*.9 GPM Excess Flow Male Hard Nose POL Female POL ME416.9 GPM Excess Flow Male Hard Nose POL w/plastic Handwheel Female POL Female POL ME /16 Female Acme 1-5/16 Male Acme/Female POL w/quick Closing Poppet ME420 ME420P*.9 GPM Excess Flow Male 1/4 Female Inverted Flare Hard Nose POL with Check Female POL ME421.9 GPM Excess Flow Male 1-5/16 Male Acme/Female Hard Nose POL POL w/quick Closing Poppet 1-20 Male ME /16 Female Acme 1/4 Female Inverted Flare 1-5/16 Male Acme/Female POL w/quick Closing Poppet ME424 ME42 * Packaged option consists of a plastic clamshell.9 GPM Excess Flow Male 1/4 Female Inverted Flare 1-5/16 Male Acme/Female Hard Nose POL with Check POL w/quick Closing Poppet WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. Packaged Inlet Outlet Outlet ME423 ME423P*.9 GPM Excess Flow Male 1-5/16 Male Acme/Female POL Hard Nose POL with Quick Closing Poppet 1-20 Male ME /6 Female Acme ME475 ME475P* #60 Male Soft Nose POL with Plastic Handwheel ME475AR #60 Male Soft Nose POL with Round Brass Handwheel 1-20 Male ME475B #60 Male Soft Nose POL ME477.9 GPM Excess Flow Male Hard Nose POL with Plastic Handwheel ME481 ME481P* 1-20 Female 1-5/16 Male Acme/Female POL with Quick Closing Poppet ME497 Male Soft Nose POL with Plastic Handwheel ME497AR Male Soft Nose POL with Round Brass Handwheel * Packaged option consists of a plastic clamshell 1-20 Male WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. M ME412 ME413 ME414 ME423 ME474 ME475 ME477 ME420P ME416 ME418 ME421 ME475AR ME475B ME497 ME497AR ME422 ME

127 OUTDOOR & CAMPING ACCESSORIES OUTDOOR & CAMPING ACCESSORIES Camping Fittings Flow-Longer and Stay-Longer Kits M ME487P Pack. Inlet Outlet ME417 1/4 MNPT 1-20 Male w/check and O-ring ME Female Cap with Strap ME Female 1/4 Hose Barb ME Female 1/4 FNPT ME487 ME487P* 1-20 Female Female POL ME488 ME488P* 1-20 Female 1/4 MNPT ME491 3/8 Male Flare 1-20 Male w/check and O-ring ME492 ME492P* 1/4 FNPT 1-20 Male - No Check ME493 9/16-18 Male Left Hand 1-20 Male w/check and O-ring ME494 9/16-18 Male Left Hand 1-20 Male - No Check ME496 1/4 Hose Barb 1-20 Male Swivel with Valve Stem and O-ring * Packaged option consists of a plastic clamshell Connection Hose MER470 Brass Tee.9 GPM Excess Flow Male Hard Nose POL x Female POL x 1-20 Male 12 ft Male x 1-20 Female MER471 Brass Elbow.9 GPM Excess Flow Male Hard Nose POL x 1-5/16 Male Acme/Female POL with Quick Closing Poppet x 1-20 Female 12 ft Male x 1-20 Female MER472 Brass Tee Stay-Longer Propane Kit -.9 GPM Excess Flow Male Hard Nose 5 ft. -.9 GPM Excess Flow Male POL x Female POL x 1-20 Male x 1/4 Female Inverted Flare POL x 1/4 Male Inverted Flare MER473 Brass Tee 5 ft. -.9 GPM Excess Flow Male Hard Stay-Longer Propane Kit -.9 GPM Excess Flow Male Hard Nose POL x Nose POL x 1/4 Male Inverted Flare, Female POL x 1-20 Male x 1/4 Female Inverted Flare and 12 ft Male x 1-20 Female The Flow-Longer Propane Kits are designed to connect small, portable appliances, normally fueled by disposable LP-Gas cylinders, to the existing LP-Gas fuel supply of a recreational vehicle, cottage, backyard patio, etc. without interrupting the supply of regulated fuel to the system. Flow-Longer eliminates the need to purchase an extra LP-Gas cylinder or several small, disposable type cylinders. M The Stay-Longer Propane Kits are designed to give you new flexibility on how you use your LP-Gas. You can stay longer by hooking up auxiliary LP-Gas cylinders, or you can tap into the RV s LP-Gas system to fuel portable high-pressure appliances. ME417 ME483 ME484 All kits include installation instructions and a convenient reusable box for storage. NOTE: The tee fitting must be installed between the vapor withdrawal valve on your LP-Gas container and the pressure regulator. This properly places the tee fitting in the high pressure portion of the LP-Gas system. Gas connections to the tee fitting are not designed for movement or rotation after installation. Flexing, twisting, or vibration should be avoided. MER470 (Boxed) WARNING: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. ME485 ME487 ME488 ME491 MER470 ME492 ME493 ME494 ME496 MER471 MER472 MER

128 OUTDOOR & CAMPING ACCESSORIES OUTDOOR & CAMPING ACCESSORIES Quick Connectors Propane Hoses M F Propane or Natural Gas Male Excess Flow Plug, 1/4 Male Pipe Thread x Male Plug F Propane Cylinder Filling Plug, 7/8 Female POL x Male Plug F F Propane Gas Coupling Adapter Kit, 1/4 Male Pipe Thread x Male Plug/Quick Connect x POL F Propane Gas Grill Quick Connect Adapter, Quick Connect x POL F F F F F F F F F F F Propane Hose Assembly 12 Propane Hose Assembly, Swivel 1-20 Male Throwaway Cylinder Thread x Soft Nose Excess Flow POL w/handwheel 5 Propane Hose Assembly, 1/4 Male Pipe Thread x 3/8 Female Flare 12 Propane Hose Assembly, Swivel 1-20 Male Throwaway Cylinder Thread x Swivel 1-20 Female Throwaway Cylinder Thread 22 Propane Replacement Barbecue Hose, 3/8 Male Pipe Thread x 3/8 Female Flare 5 Propane Hose Assembly, 1/4 Female Pipe Thread x 1/4 Male Pipe Thread 12 Natural Gas Patio Hose Assembly, 3/8 Female Pipe Thread x 3/8 Male Flare Quick Connect/Disconnect with Dust Plug and Cap 5 Propane Hose Assembly, 3/8 Male Pipe Thread x 3/8 Female Pipe Thread F M Propane Accessories F F F Replacement Propane BBQ Hose and Regulator Assembly w/appliance End Fitting x 3/8 Female Flare for Type 1 (QCC1) Gas Grill System F Propane Y Male Adapter w/handwheel, Throwaway Cylinder Threads x POL F Distribution/Lantern Post Male Throwaway Cylinder Threads x POL F Propane Y Female Adapter with Handwheel, 2 - Female QCC-1 x MPOL F Tank Stabilizer, Fits 20 lb., 30 lb., and 40 lb. Cylinders F Propane Adapter Tee w/cap and Plug, POL x 1-20 (w/check) Throwaway Cylinder Thread x Female POL F Propane Bulk Cylinder Adapter w/handwheel, 1-20 Throwaway Cylinder Thread x POL F Propane Bulk Cylinder Adapter (No Handwheel), 1-20 Throwaway Cylinder Thread x POL F º Propane Low Pressure Regulator w/90º Angle, 3/8 Female Pipe Thread x POL- 11 F Propane Low Pressure Regulator, 3/8 Female Pipe Thread x POL- 11 F º Elbow, POL x 1-20 Male Throwaway Cylinder Thread F Appliance End Fitting, Coupling Nut x 1/4 Male Pipe Thread G483 Propane Brass Cap F F F F F F Propane Brass Fittings F F F F F F F F F F F F /4 Male Pipe Thread x 1-20 Female Throwaway Cylinder Thread 1/4 Male Pipe Thread x 1-20 Male Throwaway Cylinder Thread 9/16 Left Hand Thread x POL w/handwheel 9/16 Left Hand Thread x POL 9/16 Left Hand Thread x 1-20 Throwaway Cylinder Thread w/shutoff 1/4 Male Pipe Thread x POL 1/4 Male Pipe Thread x POL w/handwheel Propane Male Throwaway Cylnder Adapter, Throwaway Thread x 1/4 Female Pipe Thread F F F F F F F F F F F

129 GENERAL INFORMATION GENERAL INFORMATION Physical Properties of Propane and Butane Products of Complete Combustion Propane Butane Propane Butane N Formula C 3H 8 C 4H 10 Normal State, 60 F. 30 Mercury Gas Gas Freezing Point (or Melting) Degrees in Fahrenheit Boiling Point, Degrees in Fahrenheit Specific Gravity of Vapor (Air = 1) at 60º F, 30 Hg Specific Gravity of Liquid (Water = 1) 60/60 F Weight Per Gallon of Liquid at 60º F, lbs Gallons Per Pound of Liquid at 60º F BTU Per Gallon (Vapor) 91, ,600 BTU Per Pound (Vapor) 21,560 21,180 BTU Per Cubic Foot (Vapor) 2,520 3,260 Latent Heat of Vaporization at Boiling Point, BTU/lb Latent Heat of Vaporization at Boiling Point, BTU/gal Specific Heat of Gas, BTU/lb./ºF at 60º F Specific Heat of Liquid, BTU/lb./ºF at 60º F Density of Gas, Pounds Per Cubic Foot Density of Liquid, Pounds Per Cubic Foot Cu. Ft. of Gas/gal. Liquid at 60º F, 30 Hg Cu. Ft. of Gas/lb. Liquid at 60º F, 30 Hg Vapor Pressure, lbs./sq. in. Gauge Temperature -10º F 20 0º F 28 10º F 45 32º F 60 60º F º F º F º F Combustion Data Propane Butane Cubic Feet of Air Required to Burn 1 Cubic Foot of Gas Cubic Feet of Oxygen Required to Burn 1 Cubic Foot of Gas Cubic Feet of Air Required to Burn 1 lb. of Gas Ignition Temperature Maximum Flame Temperature Percent of Gas in Air for Maximum Flame Temperature Maximum Rate of Flame Propagation in 1 Tube, inches/second Limits of Inflammability, Percentage of Gas in Air Mixture Percent at Lower Limit Percent at Maximum Rate of Flame Propagation Percent at Upper Limit Cubic Feet of CO 2 per Cubic Foot of Gas Cubic Feet Water Vapor per Cubic Foot of Gas Cubic Feet N 2 per Cubic Foot of Gas Pounds of CO 2 per Pounds of Gas Pounds of H 2O per Pounds of Gas Pounds of N 2 per Pounds of Gas Ultimate CO 2 Percent by Volume Standard Domestic Propane Tank Specifications Capacity Diameter Length Tank Weight Gallons Liters Inches Millimeter Inches Millimeter Pounds Kilogram Vaporization Capacities of Propane Tanks (Approximate) BTU Per Hour With 40% Liquid in Domestic Tank System Tank Size Water Capacity 20 F (-7 C) Prevailing Air Temp. 60 F (16 C) Prevailing Air Temp , , , , ,280 60, , , , , ,032 1,127, ,088,472 1,978,051 Removing Water from Tanks Tank Size Amount of Methanol to Add 150 Gallons One Pint 250 Gallons One Quart 500 Gallons Two Quarts 1000 Gallons One Gallon N Water in LP-Gas tanks can reduce the efficiency of appliances powered by the propane. To remove water from tanks add one pint of pure methanol for every 100 gallons of the tank s water capacity

130 GENERAL INFORMATION GENERAL INFORMATION Line Sizing Chart for Liquid Propane Flow in GPM Plastic Pipe (Polyethylene) Sizing Between First and Second Stage Regulators N Pipe 1/2 3/ /4 1-1/ /2 3 4 (Feet) Based on 2 PSIG pressure drop. Propane at 60º F. Based on Schedule 40/80 steel/iron pipe Sizing Pipe Between First and Second Stage Regulators Length of Schedule 40 Pipe Nominal Size Copper Tubing Type L Nominal Size Pipe or (Inside Diameter) (Outside Diameter) Tubing (ft.) 1/2 3/ /4 1-1/ /2 4 1/4 3/8 1/2 5/8 3/ Reference: NFPA Pamphlet Length of Pipe (Feet) 1/2 CTS 3/4 IPS 1 IPS 1 1/4 IPS 1 1/2 IPS 2 IPS SDR 7.00 SDR 11.0 SDR SDR SDR SDR (0.445)* (0.860)* (1.077)* (1.328)* (1.554)* (1.943)* *Inside diameter of pipe Maximum undiluted propane capacities listed are based on a pressure of 10 PSIG first stage setting and 1 PSI pressure drop. Capacities listed are 1000 Btu/hr. N

131 GLOSSARY GLOSSARY Acme Fittings Adaptors Caps, Plugs & Chains Actuators Accessories Rotary Angle Valve Anode Equipment Appliance Connectors ASME Cluster Valves ASME Tank Filler Valves Autogas Dispensers Fuel Management Equipment Gasguard Nozzles Back Check Valves Back Pressure Valves Ball Valves Barb Inserts Brass Fittings , 192 Breakaway Couplings Bulkheads Bulkhead Fittings Bushings Bypass Valves Cable Controls... 49, 51, 59 Caugthodic Testing Equipment Camp Appliance Accessories Assemblies Elbows Fittings Flow-Longer Stay Longer Tees Carburetion Bulkhead Fittings Filler Coupling Cathodic Protection Equipment Channel Locks Channel Locks Adjustable Wrench Chock Blocks Cluster Valves Combination Valves Combustible Gas Indicators Con-Stab Fittings Con-Stab Risers (Plastic Pipe) Copper Sulfate Crystals Copper Tubing Coated Copper Tubing Breakaway Crimped On Hose Ends Cylinders Collar Valves Wrench Decals and Signs Dielectric Unions (Fittings) Dispenser Valves Double Check Fill Valves Dry Break Valves Emergency Shutoff Valves Accessories Actuators Air Tubing, Connectors, and Accessories Swing Check Engine Fuel Remote Fill Valve Excess Flow Valves Filler Coupling...160, 170 Filler Hose Adapter...159, Filler Valve...165, Filler Valve Adapter...159, Filling Heads Fittings Black Iron Brass Dielectric Unions Flare Fittings Forged Steel Last Chance Adapters Pipe Thread Adapters Flex Connectors Flanged Internal Valves... 33, Flaring Tools Flow-Longer Kits Forklift Cylinder Fuel Valve Forklift DOT Multivalve Fuel Line Hose Fuel Management Equipment Gas Detectors Gas Dispensers Gasguard Nozzles Gas Grill Accessories Gas Piping Fittings Manifold Meter Mounts Meter Termination Plastic Pipe Protection Risers (Plastic Pipe) Underground Adapters Underground Couplings Underground System Gauges and Accessories Accessories Flanged Four Bolt Float Gauge , Float Gauge Accessories Gauge Ordering Information Road Master Gauges Rotary Stationary Float Test Threaded Universal Dial Kits Globe and Angle Valves Gloves Hex Plugs High Pressure Test Blocks Hogtails Hoses Assemblies Barbs Couplings (Clamp Style) Crimped On Hose Ends End Fill Check Adapters End Valves End Valve Holster End Valve Lock Reels Smart Hoses Swivel Connectors Hydrostatic Relief Valve Internal Valves Accessories Flanged Internal Valves.. 33, Threaded , 34, 37-38, 48 Latches for Internal Valves Leak Detector (Low Temp.) Liquid Transfer Adapters Liquid Transfer Valves Liquid Withdrawal Valves Lock Caps Low Pressure Adapters Low Pressure Test Blocks Manometer Manometer Kit Meters Electronic Meter Liquid Meter Positive Displacement Meter Methanol Injectors Motors Multipurpose Valves Filler/Withdrawal Multi-Service Valve , Withdrawal Needle Valves Nipples O-rings Outdoor and Camping Accessories Camping Assemblies Camping Elbows Camping Fittings Camping Tees Flow-Longer Kits Propane Accessories Propane Brass Fittings Propane Hoses Quick Connectors Stay-Longer Kits Pigtails Pipe Fittings (Polyethylene) Coupling Tools Couplings Elbows Gas Tubing Reducer couplings Reducing Tees Repair Couplings Risers Self-Tapping Tee Pipe Fittings, Valves, & Strainers (Steel) 45 Degree Elbow Degree Elbow Bushings Caps Couplings Globe and Angle Valves Nipples Square Head Plugs Tees Unions Y-Strainers Pipe Thread Sealant Plant and Vehicle Remote Controls Plugs (Hex) Pneumatic Control / E-Stop Kit POL Adapters POL Filler Couplings POL Cap and Plugs POL Locks Pressure Gauges Pressure Gauge Adapter Pressure Gauge Snubbers Pressure Test Accessories Pressure Test Kit , Pressure Test Gauge Pumps Blackmer Pump Blackmer Pump Part List Corken Pump Corken Pump Part List QCC Adapters QCC Cap QCC Connectors Quick Acting Dispensing Valves Quick Acting Toggle Valves Quick Closing Couplings Quick Connectors (for Camping) Quick Filler Couplings Rain Caps Reducing Couplings Reels Reel Anatomy Reel Part List Registers Regulators PSI Service PSIG Couplings LEADERSHIP INTEGRITY Couplings COMMITMENTLeak Check MTankCo.com Kit , sales@mtankco.com Tees Automatic Changeover Commercial / Industrial , , 18 Direct First Stage High Pressure... 8, First Stage First Stage Excela-Flo Governor High Pressure Integral Two Stage Compact Liquid Backpressure...17 POL Double Stage Pressure Reducing...15 Second Stage Second Stage Dielectric Union Second Stage Domestic... 3 Second Stage Low Pressure...13 Second Stage Light Commercial.. 14 Single Stage Low Pressure...14 Twin Stage Relief Valves External , 66, 69 Flanged Full Internal Full Internal Hydrostatic Internal Pipe-aways Quad-port Manifold Rain Caps... 42, 45-46, 214 Semi Internal Replacement Seal Kit Risers (Plastic Pipe) Safety Equipment Cathodic Protection Decals and Signs Gas Detectors High Pressure Test Blocks Hose Barbs Leak Detector (Low Temp.) Low Pressure Adapters Low Pressure Test Blocks Manometer Manometer Kit Pipe Thread Sealant Pressure Gauge Snubbers Pressure Test Accessories Pressure Test Kit , Pressure Test Gauge

132 GLOSSARY TERMS & CONDITIONS Safety Shutdown Systems Scales Scale Parts Service Valves Sight Flow Swing Check Valves Smart Hoses Spanner Wrench Stainless Flex Connector Stainless Steel Tubing Stay-Longer Kits Swing Check Valve Switches (Palm Valve) Swivel Connectors Tanks ASME Vapor Draw Buffer Home Heating Forklift Rain Caps Valves Test Gauges Tools and Accessories Channel Locks Channel Locks Adj. Wrench Flaring Tools Gas Matches Gloves Methanol Injector O-rings Pipe Cutters Pipe Wrench Replacement Seal Kit Spanner Wrench Underground Multi-Service Valve Valves Angle ASME/DOT Container Service ASME Tank Filler ASME Underground Tank , 211 Autogas Back Check , 205, 212 Back Pressure Ball Bypass Combination Dispenser Double Check Fill... 80, 205 DOT Cylinder Dry Break Emergency Shut-off Engine Fuel Engine Fuel Remote Fill Excess Flow Filler...160, , , 213 Flanged Internal Valves , 35-36, Forklift Cylinder Fuel Forklift DOT Multivalve Globe and Angle Hydrostatic Relief Hose End , 159 Internal Liquid Transfer Liquid Withdrawal , 218, 222 Locking Handle , , 239 Multipurpose Multipurpose Filler Multipurpose Withdrawal Multi-Service Multivalve (420) Needle OPD , 223 Quick Acting Quick Acting Toggle Relief Relief Manifold(s) Service Swing Check Tank Underground Multi-Service Vapor , Vapor Equalization Vapor Return Vent Vapor Coupling Vapor Equalization Valve Vapor Return Valve Vapor Service Valve Vapor Withdrawal Cylinder Valve , Wrenches Y-Strainers SELLER S TERMS & CONDITIONS All sales by MTankCo Supply, LLC ( MTankCo or Seller ) are subject to all of the terms and conditions contained herein and upon no other terms and conditions. Seller s acceptance of Buyer s order is expressly made conditional upon Buyer s assent to all of Seller s terms and Seller objects to any terms or conditions at variance with, different from or additional to the terms set forth herein, unless such terms are set forth in a writing signed by an officer of Seller. 1. PRICES & PAYMENT Seller, MTankCo Supply, LLC ( MTankCo or Seller ) will invoice Buyer and Buyer will pay Seller for Goods sold by Seller. Buyer will also pay the amount of any sales, use, excise or other tax now or hereafter imposed by reason of any sale, delivery, charge or furnishing of any Goods by Seller. Terms of payment, unless otherwise agreed, are cash or cash equivalent before or upon delivery of Goods sold. All prices are subject to change without notice. Credit terms may be extended solely at the discretion of Seller. If Seller agrees to credit terms and Buyer fails to make timely payment in accordance with those terms or any other agreement separately agreed to by Seller, or Buyers financial condition becomes otherwise impaired or Buyer is unable or unwilling to provide reasonable assurance to Seller of its ability to pay, Seller reserves the right, in its sole discretion, among other remedies, to refuse to supply Goods except upon receipt of cash with order and/or payment in full of all outstanding charges and/or assess and collect from Buyer a monthly late charge at the rate of one and one-half (1½%) per month on any delinquent balance to the extent permitted by law, and/or terminate or suspend the supply of Goods. The Buyer hereby agrees to pay, in addition to all charges indicated, reasonable attorney fees and costs of collection in the event it is necessary to place this sale in the hands of an attorney to collect any amounts owed by Buyer to Seller. Seller retains a security interest in all items or Goods sold on credit terms for which full payment has not been received by Seller including the right to recover possession of any Goods for which payment has not been made in full. 2. SHIPPING, RISK OF LOSS & RESTOCKING All sales are made F.O.B. Point of Shipment. In all cases, title shall pass upon delivery to the carrier at point of shipment and thereafter all risk of loss or damage shall be upon Buyer. Any item that is specially ordered for Buyer that Buyer, for any reason, decides not to purchase is subject to a restocking fee. The deposit on any special order not purchased will be returned to Buyer less the restocking fee, which will be charged by Seller up to 30% of the purchase price of the specially ordered item or items. This restocking fee applies to any items sold and delivered on credit terms for which full payment is not made and such items are returned or recovered by Seller due to non-payment. 3. CONTINGENCIES Neither party hereto will be liable to the other for default or delay in the performance of any of its obligations hereunder (except any obligation to make payments when due) due to act of God, accident, fire, flood, storm, riot, war, sabotage, explosion, strike, concerted acts of workers, national defense requirements, governmental law, ordinance, rule or regulation, whether valid or invalid, inability to obtain electricity or other type of energy, raw material, labor, equipment or transportation, unavailability of Goods, or any similar or different contingency beyond its reasonable control which would make performance commercially impracticable whether or not the contingency is of the same class as those enumerated above, it being expressly agreed that such enumeration shall be nonexclusive. In the event Seller is unable to provide Goods ordered or fill any order, Seller will under no circumstances be liable to Buyer or anyone else for any damages, fees or any other claims beyond return of any deposit or payment. Buyer shall not, under any circumstances, be entitled to claim or recover for any consequential damages, lost profits, loss of business or income, increased expense or any other type damage due to the failure of Seller to deliver Goods ordered by Buyer regardless of the circumstances. 4. SPECIFICATIONS Seller does not manufacture Goods it sells and is only a distributor of such Goods for others who manufacture the Goods. Seller makes no alteration to any Goods sold (including packaging, instructions, warnings and product specifications and descriptions). Accordingly, Seller provides no separate warranty regarding Goods sold to Buyer. Goods sold are only warranted to the extent of any warranty by the manufacturer. Buyer is solely responsible for determining whether or not any Goods ordered or purchased are appropriate for the use or application needed by Buyer. No statements, unless made in writing and signed by Seller, may be relied upon by Buyer regarding any merchantability, fitness for a particular purpose, specification, warranty, description or other representation as to any characteristics of any Goods sold by Seller to Buyer. Seller will provide reasonably available information upon request regarding Goods to Buyer, but Buyer is solely responsible for determining if such Goods are appropriate for the use Buyer intends to make of the Goods purchased. Buyer may reject any Goods which do not meet specification(s) of the manufacturer of the Goods. Buyer must inspect all Goods purchased and notify Seller of any unconformity within five (5) days of the delivery of the Goods to Buyer. Seller will make refund of Buyer s payment, if any, for such Goods properly rejected contingent upon the agreement of the manufacturer or supplier of the Goods to Seller agreeing that specifications for the Goods were not met and the Goods were properly rejected. If the manufacturer or supplier of Goods to Seller refuses to or supplier of the Goods to Seller and not against Seller. Under no circumstances will any claim of any kind with respect to the conformance of Goods to Specification(s), descriptions or any other characteristic of the Goods, whether or not based on negligence, warranty, strict liability or any other theory of law, result in Buyer being entitled to any amount greater than the amount actually paid for the nonconforming Goods. The foregoing shall constitute Buyer s exclusive remedy and Seller s sole obligation with respect to any such claim. THERE ARE NO EXPRESS WARRANTIES BY SELLER OTHER THAN THOSE SPECIFIED IN THIS ARTICLE. NO WARRANTIES BY SELLER (OTHER THAN WARRANTY OF TITLE AS PROVIDED IN THE UNIFORM COMMERCIAL CODE) SHALL BE IMPLIED OR OTHERWISE CREATED UNDER THE UNIFORM COMMERCIAL CODE, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. 5. LIABILITY Buyer acknowledges that there are hazards associated with the use, installation, incorporation and application of certain Goods and Buyer agrees that Buyer shall be solely responsible for any use, installation, incorporation or application of any Goods purchased and for complying with all relevant reporting obligations under all applicable laws. Buyer also assumes all responsibility for the suitability and the results of using Goods purchased, and incorporation into larger systems, machines, vehicles or anything else. Seller shall not be liable hereunder for any incidental, consequential, indirect or special damages. Buyer hereby agrees to indemnify and hold Seller harmless from any action, lawsuits, demands, claims, losses, expenses, costs, including but not limited to legal fees, and damages, arising from the injury, illness or death of the Buyer s employees or anyone else while engaged in the use, installation, incorporation, application or any other activities related to any Goods supplied by Seller hereunder, whether or not such injury, illness, or death is claimed to have been caused by, resulted from, or was in any way connected with the negligence of the Seller. 6. PATENT INFRINGEMENT Seller shall have no responsibility for patent, trademark or copyright infringement for the manufacture, use or sale of the Goods herein which are considered as the design or specification of any other third party, nor shall Seller have responsibility for the structural design or the operating performance of Goods manufactured according to designs and specifications of Buyer, or any other third party, Seller shall have no responsibility for patent infringement of Goods sold by it, which are manufactured or distributed by others. 7. THIRD PARTY USERS If the user of the Goods sold is not the Buyer, then Buyer agrees to indemnify and hold Seller harmless for any and all loss, damage, and/or expense which may at any time be sustained by the Seller by reason of any claims by the user against which the Seller would have a partial or total legal defense or additional legal rights had notice of Seller s terms and conditions of sale been made part of any sale made by the Buyer to the user. 8. ARBITRATION Your acceptance of any Goods purchased from Seller constitutes your agreement to submit any dispute of any kind related in any way to the Product purchased, charges made, and any related action arising from the transaction, including any claims for torts, negligent or intentional breach of contract or otherwise, to binding arbitration pursuant to the then Rules of the American Arbitration Association for arbitration of commercial disputes. The arbitrator shall be the sole judge of whether a claim is subject to arbitration. This agreement is binding on you, your agents, employees, successors, assigns and any others claiming through you. The arbitration shall be held in Hattiesburg, Forrest County, Mississippi and the arbitrators shall be selected as follows regardless of any contrary provisions of the American Arbitration Association: All arbitrators shall be selected from an area within 100 miles of Hattiesburg, Forrest County, Mississippi and each side shall appoint one arbitrator and the two (2) arbitrators appointed shall agree on a third (3rd) arbitrator. All arbitrators are to be licensed and practicing attorneys. Arbitrators shall apply the law of the State of Mississippi. In the event any party is successful in avoiding the agreement to arbitrate or Seller seeks collection of a debt or open account or claims of Buyer against Seller that would otherwise be subject to arbitration are less than $20,000, Buyer agrees that any lawsuit will be filed only in state or federal courts located in Hattiesburg, Forrest County, Mississippi and Buyer agrees to the personal jurisdiction of those courts over the parties and waives any objections to venue. Mississippi law is to apply to any dispute. 9. ENTIRE CONTRACT, MODIFICATION, SEVERABILITY These terms and conditions constitute the entire understanding between the parties with respect to the terms governing the subject transaction and supersede all prior negotiations, discussions and preliminary agreements, if any. Except for representations set forth herein, neither party has relied on any promises or representations made by the other as an inducement to enter the subject transaction. This Agreement may be supplemented, amended, or modified only by the mutual agreement of the parties. No supplement, amendment, or modification of this Agreement shall be binding unless it is in writing and signed by all parties. If any term or condition herein, or application thereof to any person or circumstance, shall be deemed to be invalid or unenforceable, the remainder of these terms shall be affected thereby, and all such terms, covenants or conditions shall be valid and shall be enforced to the fullest extent permitted by law. LEADERSHIP Cylinder INTEGRITY Vent Valves...82 COMMITMENT - 83 MTankCo.com accept sales@mtankco.com Buyer s rejection of the Goods, Buyer s only remedy is against the manufacturer /2018

133 MTankCo Supply, LLC Industrial Dr. Southaven, MS ph fax MTankCo.com