Standard Kerb, Channel and Edging BS Standard Concrete Kerb, Channel and Edging

Transcription

1 Sales Office: Technical Support: Manufacturing Standards: see page 19 KERB07 Q10 10 Q Paving... page 22 Block Paving... page 76 Machine Lay... page 114 Water Management... page 136 Kerb, Channel & Edging... page 212 Traffic Management... page 250 Walling & Masonry... page 342 Standard Kerb, Channel and Edging BS Standard Concrete Kerb, Channel and Edging n Marshalls uses hydraulic pressing in the manufacture of standard natural kerb*, channel and edging. n Provides consistent long-term performance as expected from Marshalls with a functional unit of this type. n All units are manufactured in accordance with BS EN 1340:2003 Concrete kerb units requirements and test methods, together with a range of non-standard sizes manufactured to the same specification offering greater flexibility in design. n All straight units are 914mm unless otherwise stated. n Marshalls recommends the use of appropriate handling equipment in the installation of these products, and that installers work in accordance with current health and safety legislation. For further information contact Marshalls Technical Support on *Some radius unit are manufactured in a wet cast production method. British Standard Products For easy identification, BS EN 1340:2003 sections are tinted thus Weights The approximate number of units per tonne is indicated in each section thus 20 = 20 units per tonne. Saxon Paving, Priora and Standard Kerb, The Green Building, Thorpe Park, Leeds 239

2 Half Battered STRAIGHT 150 x 305 HB1 Ref No. RK x 255 HB2 Ref No. RK (also available in 600mm lengths) 125 x 150 HB3 Ref No. RK (97kg) 10 (42kg) 24 RADIUS Convex (external) Concave (internal) Formula half battered radius kerb Note: ¼ circles can be constructed without cutting from units with a face length of 780mm. Units listed below are 780mm face length unless otherwise stated. For radii greater than 12m straights should be utilised. Radius Type Size Profile No. per Weight 1/4 Circle* kg (approx) External Rad 150 x 305 HB1 RK RK RK RK RK RK x 255 HB2 RK RK RK RK RK RK RK RK RK RK x 150 HB3 RK RK RK RK RK RK Internal Rad 125 x 255 HB2 RK RK RK RK RK RK RK RK External Rad 125 x 255/150 HB to BN (LH) RK RK RK Drop Kerb 125 x 255/150 HB to BN (RH) RK RK RK XXXXXXXXX = 950 face length XXXXXXXXX 914mm face length XXXXXXXXX BS EN 1340 Half Battered Radius Kerb available ex-stock. *Except droppers. 240

3 DROP KERBS 1:12 Gradient 1:9 Gradient 125 x 255/178 Left hand Ref No. RK x 255/178 Right hand Ref No. RK x 178 Centre Ref No. RK x 255/150 Left hand DL1 Ref No. RK x 255/150 Right hand DR1 Ref No. RK (59kg) 17 (49kg) 20 (59kg) 17 TRANSITIONS SIDE OFFLET 125 x 255 HB to BN Left hand Ref No. RK x 255 BN to HB Right hand Ref No. RK x 255 HB to 45º SP Left hand TL Ref No. RK x º SP to HB Right hand TR Ref No. RK For use with 125 x 255 HB Ref No. RK (62kg) 16 DOUBLE DROP KERB 1:24 Gradient 125 x 255/215 HB Left hand Ref No. RK x 255/215 HB Right hand Ref No. RK x 215/178 Left hand Ref No. RK x 215/178 Right hand Ref No. RK (54kg) 19 (63kg) 16 ANGLES QUADRANTS External 125 x 255 HBXA Ref No. RK Internal 125 x 255 HBIA Ref No. RK x 255 QHB Ref No. RK x 255 QHB Ref No. RK (43kg) 23 (99kg)

4 Bullnosed STRAIGHT 150 x 305 BN Ref No. RK x 255 BN Ref No. RK Also available in 600mm length 125 x 150 BN Ref No. RK (100kg) 10 (70kg) 14 (42kg) 24 RADIUS Convex (external) Concave (internal) Formula Note: ¼ circles can be constructed without cutting from units with a face length of 780mm. Units listed below are 780mm face length unless otherwise stated. For radii greater than 12m straights should be utilised. Radius Description Size Profile No. per Weight 1/4 Circle* kg approx Ext Rad Kerb 150 x 305 BN RK RK RK RK RK RK x 255 BN RK RK RK RK RK RK RK RK RK x 150 BN RK RK RK RK RK RK RK Int Rad Kerb 125 x 255 BN RK RK RK x 150 BN RK RK RK RK RK RK XXXXXXXXX BS EN 1340 Bullnosed Kerb available ex-stock. *Except droppers. 242

5 DROP KERBS 125 x 255/150 Left hand Ref No. RK x 255/150 Right hand Ref No. RK x 150 Centre Ref No. RK (59kg) 17 (42kg) 24 TRANSITION 125 x 255 HB to BN Left hand Ref No. RK x 255 BN to HB Right hand Ref No. RK ANGLES QUADRANTS Convex (external) 125 x 255 BNXA Ref No. RK Concave (internal) 125 x 255 BNIA Ref No. RK x 255 QBN Ref No. RK x 255 QBN Ref No. RK (37kg) 27 (37kg) 27 (45kg) 22 (99kg)

6 45 Splayed STRAIGHT 125 x 255 SP Ref No. RK Also available in 600mm length 125 x 150 SP Ref No. RK (64kg) 16 (36kg) 24 RADIUS Radius (mm) 125 x 255 SP Convex (external) No. per metre* No. per 1/4 circle Weight (kg) approx *Assumes inclusion of trowel width joint. 45 Splayed Kerb available ex-stock. Reference No. RK RK RK RK RK RK RK RK RK DROP KERB 125 x 255/150 Left hand DL2 Ref No. RK x 255/150 Right hand DR2 Ref No. RK x 150 Centre Ref No. RK (52kg) 19 (42kg) 24 TRANSITION SIDE OFFLET 125 x 255 Left hand (HB to 45 o SP) TL Ref No. RK x 255 Right hand (45 o SP to HB) TR Ref No. RK For use with 125 x 255 SP Ref No. RK (62kg)

7 45 Splayed QUADRANTS 455 x 255 QSP Ref No. RK x 255 QSP Ref No. RK (101kg) 24 (41kg) 10 ANGLES External 125 x 255 SPXA Ref No. RK Internal 125 x 255 SPIA Ref No. RK