Structural Sections. Page 15

Transcription

1 Page 15

2 MILD STEEL CHANNELS Product Shortname: CH AS AS (on indent only) BS A Mass per Metre = area of section x = kg/m Metres per Tonne = 1000 = metres kg/m Size (A x B) Mass per Metre Flange thickness (T) Web thickness (t) Area of section kg/m (mm 2 ) TF 50 x PF 75 x PF 100 x PF 125 x PF 150 x PF 180 x PF 200 x PF 230 x PF 250 x PF 300 x PF 380 x Standard stock lengths available are 6, 9, 12, 15 metres. Mild Steel Channels are available on an ex-stock and indent basis. Not all sizes available exstock in all lengths. Out of Square Tolerance (Parallel Flange): 75mm x 40mm 1.15mm 100mm x 50mm 1.52mm 125mm x 65mm 1.95mm 150mm x 75mm 2.25mm For more detailed information and additional properties, please contact Easysteel. Page 16

3 COLD FORMED CHANNEL-LIPPED Product Shortname: CRCH Manufactured from steel to AS 1594-HA250 Depth A x Width of Section B x Thickness t Nominal Sizes Actual Dimensions Mass per Metre (kg/m) Width of Lip 50 x 25 x 3 50 x x 40 x 3 76 x x 50 x x Sizes outside this range can be obtained. Larger sizes are available in purlins. COLD FORMED CHANNEL-PLAIN Product Shortname: CRCH Manufactured from steel to AS 1594-HA250 Depth A x Width of Section B x Thickness t Nominal Sizes Actual Dimensions Mass per Metre (kg/m) 50 x 25 x 3 50 x x 40 x 3 76 x x 50 x x Sizes outside this range can be obtained. Larger sizes are available in purlins. Page 17

4 UNIVERSAL BEAMS Product Shortname: UB AS AS (on indent only) Depth of Section A x Mass per Metre (kg/m) Size Mass per Metre kg/m Depth of Section A Width of Section B Flange Thickness T Web Thickness t 150 x x x x x x x x x x x x x x x x x x x x x x x x x x x Stock lengths vary according to the size of the beam. Length range is 6, 9, 12, 15, 18 metres. Other lengths available on indent. Other sizes of sections are also available on an indent basis. For more detailed information and additional properties, please contact Easysteel. Page 18

5 Size Mass per Metre kg/m UNIVERSAL COLUMNS Product Shortname: UC Depth of Section A AS AS (on indent only) Flange Width B x Mass per metre (kg/m) Width of Section B Flange Thickness T Web Thickness t 100 x x x x x x x x x x x x x Stock lengths vary according to the size of the column. Length range is 6, 9, 12, 15, 18 metre. Other lengths available on indent. Other sizes of sections are also available on an indent basis. For more detailed information and additional properties, please contact Easysteel. WELDING BEAMS/COLUMNS Tapered and Parallel Flange available NZS 3404:2009 Plate Dimensions Minimum Maximum Flange Thickness Flange Width Web Thickness 5 50 Web Depth 200 2,400 Length 3,500 to 23,500* * 30,500 by special arrangement Page 19

6 Size Mass /metre (Kg/m) ROLLED STEEL JOISTS Product Shortname: RSJ AS Depth of section A x Mass per metre (kg/m) Depth of Width of Section A Section B Flange thickness T Web thickness t Length 100 x 45 x m 125 x 65 x m, 12m PLAIN CARBON RAIL Product Shortname: RAIL JISE1103 / AS1085, Part 1 Size Range: Available on indent. Common Sizes Available*: Kg/m *Sizes outside this range can be obtained. H BEARING PILES & LARGE STRUCTURAL SECTIONS Product Shortname: Specification: Size Range: Available on indent. UC / UB ASTM A36 AS BS A/50B EN10025 S355JR Page 20

7 DIMOND TOP NOTCH PURLINS AS 1397:2011 Depth D and Thickness t Top Notch Section Depth of Section D Width of Section B Thickness t Area of Section A (mm 2 ) Mass per unit length (kg/m) Centre of Gravity Y c Shear Centre Y e 60 x x x x x x x x Notes: Mass assumes a total coated weight for the standard zinc coating of Z 275 (275 g/m 2 ). Tabulated properties are based on full unreduced sections. Top Notch Specification and Tolerance Top Notch Base Metal Thickness (BMT) Steel Grade Yield Strength fy (MPa) Zinc Weight (Z) (g/m 2 ) 0.75 G G G Tolerances Size / Overall Depth ±1 ±2 ±3 Overall Width ±1 ±2 ±3 Top Web Width ±1 ±1 ±1 Notes: Dimond Hi-Span Purlins are manufactured by roll forming galvanized steel coil produced to AS 1397 : Z 450 zinc weight coil can be supplied with order lead times of up 12 weeks. Please discuss with Dimond on 0800 DIMOND. Page 21

8 DIMOND HI-SPAN PURLINS AS 1397:2011 Depth D and Rationalized Thickness t Swage Depth i DHS Section Depth of Section D Depth of Section B Thickness t Mass (kg/m) Weight (kn/m) d Swage Depth i b x c x o DHS 150/ DHS 150/ DHS 200/ DHS 200/ DHS 200/ DHS 250/ DHS 250/ DHS 250/ DHS 300/ DHS 300/ DHS 350/ DHS 400/ Notes: Mass assumes a total coated weight for the standard zinc coating of Z 275 (275 g/m 2 ) Tabulated properties are based on full unreduced sections. DHS Specification and Tolerance Base Metal Thickness (BMT) Steel Grade Yield Strength fy (MPa) Zinc Weight (Z) (g/m 2 ) DHS Purlins and Girts < 1.5 G Z 275 > 1.5 G Z 275 Tolerances Depth +/-2mm Width +/-2mm Hole Centres +/-1.5mm Length +/-6mm Web/Flange Angle degrees Notes: Dimond Hi-Span Purlins are manufactured by roll forming galvanized steel coil produced to AS 1397 : Z 450 zinc weight coil can be supplied with order lead times of up 12 weeks. Please discuss with Dimond on 0800 DIMOND. Page 22

9 DIMOND DHS PURLIN BRACING AS 1397:2011 Depth D and Rationalised Thickness t Fastbrace Bolted Channel Brace Channel Section Data: CODE D x B t Mass (kg/m) Weight (kn/m) Area (mm 2 ) I a DB 89 / x Notes: Mass assumes a total coated weight for the standard zinc coating of Z 450 (450 g/m 2 ). Tabulated properties are based on full unreduced sections. Bracing Specification and Tolerance Base Metal Thickness (BMT) Steel Grade Yield Strength fy (MPa) Zinc Weight (Z) (g/m 2 ) Bracing channel 1.15 G End cleats 2.00 G Tolerances Depth ±1mm Width ±1mm Length ±2mm Web/Flange Angle 89 to 93 degrees Note: Dimond DHS Purlin Bracing is manufactured by roll forming galvanized steel coil produced to AS 1397 : Page 23