THE NEXT GENERATION OF PERFORMANCE
|
|
- Basil Lane
- 6 years ago
- Views:
Transcription
1 Best Value Guaranteed THE NEXT GENERATION OF PERFORMANCE
2 1 HP Continuous-Duty Dust Collector (M I ) 1 HP, 110 V, 1 PH, 7 A 4 (102 mm) 750 CFM 10 (254 mm) 75 dba 15 (381 mm) Bag Capacity: 20 gal. (90 L) 6.5 of water (without bag) 55 lbs (25 kg) DUST COLLECTION HEPA Cans Available for All Machines 750 CFM Mobile Dust Collector with Anti-Spark Impeller 1 HP Dust Collector (MI-11150) 1 HP, 110 V, 1 PH, 7 A 4 (102 mm) 550 CFM 10 (254 mm) 80 dba Filter Area: sq-ft 15 (381 mm) Bag Capacity: 20 gal. (90 L) 6.5 of water (without bag) 67 lbs (30 kg) 1 Micron Canister Filter Traps Ultra-Fine Dust Particles 1.5 HP Dust Collector (MI-11200) 1.5 HP, 110/220 V, 1 PH, 14/7 A 1 x 6 (152 mm) or 2 x 4 (102 mm) 1,280 CFM 13 (330 mm) 80 dba Bag Capacity: 42 gal. (190 L) 9 of water (without bag) 107 lbs (49 kg) Delivers 1,280 CFM at a Great Price! 1.5 HP Dust Collector w/canister Filter (MI-11250) 1.5 HP, 110/220 V, 1 PH, 14/7A 1 x 6 (152 mm) or 2 x 4 (102 mm) 1,280 CFM 13 (330 mm) 80 dba Filter Area: 80 sq-ft Bag Capacity: 42 gal. (190 L) 9 of water (without bag) 130 lbs (59 kg) 1,280 CFM Dust Collector with Ultra-Fine Canister Filter
3 2 HP Dust Collector (MI-11300) 2 HP, 220 V, 1 PH, 9 A 1 x 6 (152 mm) or 2 x 4 (102 mm) 1,600 CFM 12 3/4 (323 mm) dba Bag Capacity: 42 gal. (190.9 L) 12 of water (without bag) 132 lbs (60 kg) Overall Dimensions: 39 3/8 x 31 1/2 x 74 3/4 2 HP, 220 V, 1 PH, 9 A 1 x 6 (152 mm) or 2 x 4 (102 mm) 1,600 CFM 12 3/4 (323 mm) 80 dba Filter Area: 80 sq-ft Bag Capacity: 42 gal. (190 L) 12 of water (without bag) 141 lbs (64 kg) Overall Dimensions: 39 3/8 x 31 1/2 x 74 3/4 3 HP Dust Collector (MI-11400) 3 HP, 220 V, 1 PH, 12 A 1 x 6 (152 mm) or 3 x 4 (102 mm) 2,300 CFM 12 (305 mm) dba Bag Capacity: 83 gal. (314 L) 16 of water (without bag) 165 lbs (75 kg) Overall Dimensions: 60 x 32 5/8 x 76 1,600 CFM Dust Collector with Anti-Spark Impeller 2 HP Dust Collector w/canister Filter (MI-11350) 2,300 CFM Dust Collector with Anti-Spark Impeller 3 HP Dust Collector w/canister Filters (MI-11450) 3 HP, 220 V, 1 PH, 12 A 1 x 6 (152 mm) or 3 x 4 (102 mm) 2,300 CFM 12 (305 mm) dba Filter Area: 80 sq-ft Bag Capacity: 83 gal. (314 L) 16 of water (without bag) 222 lbs (101 kg) Overall Dimensions: 61 x 21 5/8 x 74 3/4 Turbo Overhead Air Filter (MI-11700) 1/3 HP, 110 V, 1Ph, 2.8 A Air Volume (3 Speeds): 700/900/1250 CFM Filter Cycle (26/hr): 20 x 20 x 8 (6 x 6 x 2.44 m) Filters: 5 Microns Outer/ 1 Micron Inner Timer Settings: Continuous, 2, 4, 6, 8 min Sound Rating: 64 db Unit Size: 30 x 24 x 14 (762 x 609 x 355 mm) 86 lbs (39 kg) Super Quiet Ambient Air Filtration 1,600 CFM Dust Collector with Ultra-Fine Canister Filter 2,300 CFM Mobile Dust Collector with Ultra-Fine Canister Filters
4 Bench-Top Belt Oscillating Spindle Sander (MI-16100) 1/2 HP, 110 V, 7.5 A Spindle RPM: 1,720 Oscillations/min: 29 Oscillation Length: 15/16 (24 mm) Spindle Sizes: 1/4 to /2 x 14 1/2 (368 x 368 mm) Table Tilt: 0o to 45o 18 5/16 x 14 1/2 (465 x 368 mm) Dust Outlet: 2 (51 mm) with 4 adapter 14 1/2 x 14 1/2 (368 x 368 mm) 81 lbs (37 kg) SANDERS 1/2 HP Continuous Duty Motor Oscillating Spindle Sander (MI-16150) 1 Micron Canister Filter Traps Ultra-Fine Dust Particles 1 HP, 110/220 V, 1 PH, 10.5 A Spindle Speed: 1,725 R PM Spindles: 10 (1/4 to 4 ) Oscillation Length: 1.5 (36 mm) Oscillation Speed: 75 OPM 24 1/4 x 241 1/4 (616 x 6161 mm) Table Tilt Angle: 0 to (990 mm) Dust Outlet: 4 (102 mm) x 17.5 (445 x 445 mm) 319 lbs (145 kg) 2 x 42 Belt & 8 Disc Sander (MI-16210) 1/2 HP, 120 V, 6.2 A Belt Size: 2 x 42 or 1 x 42 (50 or 25 mm x 1066 mm) Belt Speed: 3,100 LFM Disc Size: 8 (203 mm) Disc Speed: 3,450 RPM Belt 10 x 6 (254 x 152 mm) Belt Table Tilt: Disc 10 3/4 x 7 1/2 (273 x 190 mm) Disc Table Tilt: lbs (28.05 kg) 1 & 2 Platens are included to allow for either size belt 1 & 2 Belt Option
5 Heavy-Duty Belt & Disc Sander (MI-16300) Belt Size: Disc Diameter: Belt Speed: Disc Speed: Belt Table Tilt: Disc Table Tilt: Belt Position: Disc Backing Plate: Dust Ports: 1 1/2 HP, 110/220 V, 1 PH, 13/6.5 A 6 x 48 (152 x 1219 mm) 12 (304 mm) 2,300 LFM 1,800 RPM 0o and 45o 45o outside Multi-angle Cast Iron 15 3/4 x 22 (400 x 558 mm) 1 x 5 (127 mm) 370 lbs (167 kg) Sands Metal & Wood 6 x89 Edge Sander w/tilting Head (MI-16400) Belt Size: Belt Speed: Front Aux. Dust Outlet: Overall Dimensions: Use Aluminum Oxide belts/discs for sanding metal 1/2 HP, 110 /220 V, 18/9 A 6 x 89 (152 x 2,260 mm) 3,900 LFM 9 7/8 x 29 5/8 (250 x 751 mm) 9 7/8 x 11 7/8 (250 x 300 mm) 4 (102 mm) 50 x 21 x 49 (1,270 x 533 x 1,245 mm) 275 lbs (123 kg) Versatile & Accurate Tilting Head 6 x 108 Edge Sander (MI-16500) 1.5 HP, 110/220 V, 1 PH, 14/7 A 1 x 6 (152 mm) or 2 x 4 (102 mm) 1,280 CFM 13 (330 mm) 80 dba Bag Capacity: 42 gal. (190 L) 9 of water (without bag) 107 lbs (49 kg) Versatile Commercial Duty Edge Sander 24 Double Drum Sander (MI-16750) Conveyor Max Sanding Width: Sanding Thickness: Min. Sanding Length: Drum Diameter: Drum Speed: Feed Speed: (variable) Dust Outlet: 3 HP, 220 V, 1 PH 15 A 1/6 HP 24 (610 mm) 1/4 to 5 (6 to 127mm) 5 (127 mm) 5 (127 mm) 1,150 RPM 3 to 20 FPM (.93 to 6.2 m/min) 4 (102 mm) 42 1/2 x 16 1/2 (1,080 x 419 mm) 515 lbs (234 kg) Variable Speed Double Sanding Durms
6 PLANERS 13 Helical Head Planer (MI-31160) 110 V, 15 A Carbide inserts: 26 Cutterhead Speed: 10,000 RPM Max Planing Width: 13 (330 mm) Planer Opening: 6 (152 mm) Minimum Thickness: 1/8 (3 mm) Minimum Stock Length: 5 (127 mm) Maximum Cutting Depth: 1/16 (1.5 mm) Feed Speed: 26 LMF Table w/extensions: 33 3/4 x 13 (857 x 330 mm) 79 lbs (35.8 kg) Helical Head with Carbide Inserts Main Inserts: Extension Wing Size: Max Planing Width: Cutterhead Speed: Maximum Thickness: Minimum Stock Length: Maximum Cutting Depth: Feed Speed: Dust Ports: Helical Head with Carbide Inserts 20 Heavy-Duty Planer (MI-31450) 5 HP, 220 V, 1 PH, 23.2 A 58 carbide two-sided inserts 15 x 21 1/4 (380 x 538 mm) 55 x 20 (1437 x 508 mm) 5,000 RPM 8 (202 mm) 6 3/4 (172 mm) 1/8 (3 mm) 16 & 20 LFM 5 (127 mm) 893 lbs (406 kg) 15 Helical Head Planer (MI-31250) 3 HP, 230 V, 1 PH, 15 A Carbide inserts: 42 Cutterhead Speed: 5,000 RPM Cutterhead Diameter: 2 7/8 (50.8 mm) Max Planing Width: 15 (380 mm) Planer Opening: 6 (152 mm) Minimum Thickness: 3/8 (9.5 mm) Minimum Stock Length: 6 1/2 (1.98 mm) Maximum Cutting Depth: 1/8 (3.175 mm) Feed Speed: 16 LMF & 20 LMF (4.87 & 6.1 M/min) Dust Ports: 1 x 5 (127 mm) 598 lbs (271 kg) Helical Head with Carbide Inserts 3 Phase Version Also Available (MI-31753)
7 Deluxe Router Lift & Table Package (MI-42150) Overall Dimensions: 35 1/2 x 24 x 41 (902 x 609 x 1041mm) 24 x 32 x 1 1/4 (609 x 812 x 32 mm) 36 1/2 (927 mm) Fence Size (each): 3 x 17 3/4 x 3/4 (76 x 451 x 19 mm) Max Fence Travel: 9 (229 mm) Dust Outlet: 4 (102mm) Dist. Between T-Slot & Spindle Center: 3/4 :5 5/8 (143 mm) / 3/8 : 7 3/16 (183 mm) Dist. Between Spindle Center to Front Edge of Table: 12 (305 mm) T-Slot Dimensions: 3/4 x 3/8 (19 x 10 mm) 3/8 x 1/4 (10 x 7 mm) Router Insert Plate: 9 1/4 x 11 3/4 (235 x 298 mm) Table Opening Sizes: 3 3/4 (95 mm) plate 1 1/2 (38 mm) insert ring 185 lbs (84 kg) Award Winning Router Lift 8 Bench-Top Jointer (MI-81180) JOINTERS/ ROUTER LIFT & TABLE Fence Safety Hold-downs Chain Drive Award Winning Router Lift Table Safety Hold-downs Moveable Safety Switch Thru-Hole crank eliminates buildup in the crank mechanism Dust Box Router Lift Available Separately (MI-42100) Micro Fence Cast Iron Table Retractable Mobile Base 1 HP, 120V, 12A Cutterhead Speed: 12,000 RPM Carbide Inserts: 16 (14 x 14 x 2 mm) Maximum Cutting Width: 8 (203 mm) Maximum Cutting Depth: 1/8 (3 mm) Fence Length: 33 1/2 x 8 (850 x 203 mm) Work Surface: 30 x 6 1/8 (762 x 155 mm) Dust Outlet: 4 (101 mm) w/ 2 Reducer 62 lbs (28kg) Helical Cutterhead with Double-Sided Carbide Inserts 8 Jointer with 73 Table (MI-81350) Helical Cutterhead with Quick-Change Carbide Inserts 2 HP, 230V, 10A Cutterhead Speed: 5,500 RPM Carbide Inserts: 22 (30 x 12 x 1.5 mm) Maximum Cutting Width: 8 (203 mm) Maximum Cutting Depth: 1/2 (13 mm) Fence: 5 x 37 (127 x 940 mm) Fence Tilt: 0-45o Table: 73 x 8 (1,854 x 203 mm) Dust Outlet: 4 (101 mm) 305 lbs (138kg)
8 TABLE SAWS 10 Cabinet Saw (MI-51100) Blade Diameter: Arbor Diameter: Arbor Speed: Max. Dado Cut: Dust Port Diameter: 2 HP, 115 V/230V, 19/9.5 A 10 (254 mm) 4,000 RPM 3/16 (21 mm) 4 (102 mm) 36 (914 mm) 44 x 27 (1,118 x 686 mm) 20 x 20 (508 x 508 mm) 330 lbs (150 kg) Forged One-Piece Arbor Continuous Duty 3HP Motor 10 Cabinet Saw w/3 HP Motor (MI-51250) 3 HP, 230 V, 13 A Blade Diameter: 10 (254 mm) Arbor Diameter: Arbor Speed: 4,000 RPM Arbor Tilt: 0 to 45 Dust Port Diameter: 4 (102 mm) 36 3/4 (914 mm) 44 x 27 (1,118 x 686 mm) 23 x 22 1/2 (584 x 572 mm) 371 lbs (168 kg) 10 Heavy-Duty Cabinet Saw w/3 HP Motor (MI-51350) 3 HP, 230 V, 1 PH,11.7 A Optional 5 HP, 220 V, 3 PH, 4 A Blade Diameter: 10 (254 mm) Arbor Diameter: Arbor Speed: 4,300 RPM Arbor Tilt 0 to 45 Maximum Dado Cut: 13/16 (21 mm) Dust Port Diameter: 4 (102 mm) 34 (863 mm) 42 x 29 (1,066 x 736 mm) 21 x 23 (533 x 584 mm) 540 lbs (245 kg) Magnum Industrials Toughest Saw 10 Overarm Blade Cover (MI-52100) Boom Diameter: 4 (102 mm) Range of Boom: 39 3/4-69 5/8 (1,010 1,770 mm) Boom Height: (above table) 13 3/8 (340 mm) Boom Height: (above floor) 33 3/4-33 3/4 (860 1,230 mm) Blade Cover Dimensions: 3 1/8 x 17 (80 x 432 mm) 58 lbs (26.5 kg) Version Also Available (MI-52150)
9 DRILL PRESSES 14 Bench Drill Press (MI-76100) 1/2 HP, 110 V, 8 A Drilling Capacity: Chuck Size: Spindle Travel: 3 1/8 (80 mm) 11 3/8 (289 mm) Spindle Speeds: (12) 280-3,000 RPM Spindle / Chuck Taper: MT2 / JT3 38 1/2 (978 mm) Base Size: 10 x 16 7/8 (254 x 429 mm) Swing: 13 3/8 (340 mm) 105 lbs (48 kg) Laser Light & Drill Chuck Guard Included 17 Floor Drill Press (MI-76350) 1 HP, 110 V, 12.5 A Drilling Capacity: 3/4 (19 mm) Chuck Size: Spindle Travel: 3 1/8 (80 mm) 12 (305 mm) Spindle Speeds: (12) 280-3,000 RPM Spindle / Chuck Taper: MT2 / JT3 64 1/2 (1638 mm) Base Size: 11 3/4 x 19 5/8 (302 x 500 mm) Swing: 17 (432 mm) 200 lbs ( 90 kg) Laser Light & Drill Chuck Guard Included 17 Electronic Variable Speed Drill Press (MI-76390) 1 HP, 110 V, 1 PH Drilling Capacity: 3/4 (19mm) Chuck Size: Spindle Travel: 5 7/8 (150 mm) Table Size (Diameter): 11 13/16 x 14 1/2 (300 x 370 mm) Spindle Speeds: 250 to 3,200 RPM Spindle / Chuck Taper: MT3 / JT3 68 (1,730 mm) Base Size: 14 x 22 5/8 (355 x 600 mm) Swing: 16 15/16 (430 mm) 275 lbs (125 kg) Electronic Variable Speed! 14 Floor Drill Press (MI-76150) 1/2 HP, 110 V, 8 A Drilling Capacity: Chuck Size: Spindle Travel: 3 1/8 (80 mm) 11 3/8 (289 mm) Spindle Speeds: (12) 280-3,000 RPM Spindle / Chuck Taper: MT2 / JT3 62 (1575 mm) Base Size: 10 x 16 7/8 (254 x 429 mm) Swing: 13 3/8 (340 mm) 125 lbs (56 kg) Laser Light & Drill Chuck Guard Included 17 Heavy-Duty Drill Press (MI-76370) 1 HP, 110 / 220 V, 12.5 / 6.25 A Drilling Capacity: 1 (21 mm) Chuck Size: 3/4 (19 mm) Spindle Travel: 6 (152 mm) 14 (355 mm) Spindle Speeds: (12) 255-2,750 RPM Spindle / Chuck Taper: MT3 / JT3 68 (1,730 mm) Base Size: 11 3/4 x 19 5/8 (302 mm x 500 mm) Swing: 16 15/16 (340 mm) 230 lbs (104 kg) Extra Long 6 Stroke 22 Floor Drill Press (MI-76450) 1 HP, 110 V, 14 A Drilling Capacity: 1 1/4 (32 mm) Chuck Size: 3/4 (19 mm) Spindle Travel: 4 1/2 (114 mm) 16 1/2 x 19 Spindle Speeds: (12) 120-2,270 RPM Spindle / Chuck Taper: MT4 / JT3 68 3/4 (1746 mm) Base Size: 19 1/2 x 22 1/2 (495 x 558 mm) Swing: 22 (559 mm) 380 lbs ( 171 kg) Laser Light & Drill Chuck Guard Included w/lockout Safety Feature
10 Radial Arm Drill Press (MI-76650) DRILL PRESS/ BORING MACHINES 1/2 HP, 110 V, 8 A Drilling Capacity: Chuck Size: Spindle Travel: 3 1/8 (80 mm) Spindle Distance to Table: 31 (790 mm) Spindle Distance to Base: 49 3/8 (1255 mm) 16 1/2 x 19 Column Diameter: 2 7/8 (v) / 2 5/16 (h) (73 / 59mm) Max Spindle Speed: 3,580 RPM Spindle / Chuck Taper: MT2 / JT3 68 (1730 mm) Base Size: 11 3/4 x 19 1/2 (300 x 495 mm) Swing: 8 5/8 to 31 7/8 (220 to 810 mm) 165 lbs (75 kg) Includes (13) 5mm Carbide Bits Bores 13 Holes In One Stroke Hinge Boring Machine (MI-77450) Drills at Compound Angles 13 Spindle Boring Machine (MI-77400) 1.5 HP, 110 V, 1 Phase, 12.6A Chuck Capacity: 1/2 (10 mm) shank Spindle Speed: 1,720 RPM Chisel Capacity: 1/4 to 1 (6 to 26 mm) Maximum Chisel Stroke: ` 8 (200 mm) Fence Size: 14 1/8 x 2 7/8 (360 x 73 mm) Distance-Fence to Centre Chisel: 3 (77 mm) Distance-Centre Chisel to Table: 6 1/2 to 10 3/16 (165 to 259 mm) 12 1/2 x 18 (318 x 458 mm) 12 x 12 (305 x 305 mm) 48 1/2 (1232 mm) 236 lbs (107.5 kg) Collet Size: Spindle Speed: Hinge Type: Maximum Stock Thickness: Fence Size: Maximum Depth of Stroke: Maximum Depth (Bit to Fence): Table Height (From Floor): 1 HP, 110 V, 1 Phase, 15A 3/8 (10 mm) 3,450 RPM Blum-Style 5 1/2 (140 mm) 66 1/8 x 105 1/2 (1,680 x 2,680 mm) 4 5/8 (120 mm) 3 1/2 (88 mm) 31 1/2 x 23 5/8 (800 x 600 mm) 12 x 12 (305 x 305 mm) 33 1/4 (845 mm) 210 lbs (95 kg) One Stroke Pre-Drilling for Blum-Style Hinges
11 MORTISERS 5/8 Heavy-Duty Mortiser (MI-77150) 1/2 HP, 110 V, 1 PH, 3.8A Spindle Chuck Capacity: 1/2 (13 mm) Spindle Speed: 1,720 RPM Chisel Capacity: 1/4 to 5/8 (6 to 16 mm) Maximum Chisel Stroke: 9 (228 mm) Fence Size: 14 1/8 x 2 7/8 (360 x 73 mm) Distance-Fence to Centre Chisel: 4 (101 mm) Distance-Fence to Centre Chisel: 6 to 9 (152 to 228 mm) 13 1/2 x 11 1/8 (343 x 230 mm) 14 1/8 x 10 3/8 (360 x 265 mm) 29 (736 mm) 106 lbs (48 kg) Tilting Head 5/8 Mortiser (MI-77100) Spindle Chuck Capacity: Spindle Speed: Chisel Capacity: Maximum Chisel Stroke: Fence Size: Distance-Fence to Centre Chisel: Table w/ Extensions: Sturdy Design for Optimal Performance 1 Heavy-Duty Mortiser (MI-77200) 1/2 HP, 110 V, 1 PH, 6A 1/2 (13 mm) 1,720 RPM 1/4 to 5/8 (6 to 16 mm) 5 (127 mm) 13 5/16 x 2 15/16 (355 x 75 mm) 4 (101 mm) 14 1/4 x 11 1/8 (362 x 283 mm) 35 x 11 1/8 (890 x 283 mm) 15 9/16 x 17 1/8 (396 x 435 mm) 24 3/8 (620 mm) 99 lbs (45 kg) 1.5 HP, 110 V, 1 Phase, 12.6A Chuck Capacity: 1/2 (10 mm) shank Spindle Speed: 1,720 RPM Chisel Capacity: 1/4 to 1 (6 to 26 mm) Maximum Chisel Stroke: 8 (200 mm) Fence Size: 14 1/8 x 2 7/8 (360 x 73 mm) Distance-Fence to Centre Chisel: 3 (77 mm) Distance-Centre Chisel to Table: 6 1/2 to 10 3/16 (165 to 259 mm) 12 1/2 x 18 (318 x 458 mm) 12 x 12 (305 x 305 mm) 48 1/2 (1232 mm) 236 lbs (107.5 kg) Optional Stand Also Available (MI-99772) Tilting Head
12 BAND SAWS 14 Wood Cutting Bandsaw (MI-91350) Max Cutting Height: Max Cutting Width: Wheel Size: Wheel Speeds: Blade Speeds: Blade Width: Blade Length: Table Tilt: Dust Collection Outlets: 1 HP, 110/220 V, 1 PH, 10.5 A 6 (150 mm) 13.5 (342 mm) 14 (355 mm) 495 & 825 RPM 1,800 & 3,000 LFM 1/8 to 3/4 (3mm to19 mm) 93.5 (2,375 mm) 16 x 16 (406 mm) 0o to 45o(right) 0o to 10o (left) 42 3/4 (1,086 mm) 4 (101 mm) 18 5/8 x 15 3/4 (460 x 400 mm) 224 lbs (102 kg) European Design with Big Resaw Capacity 14 HD Deluxe Bandsaw (MI-91500) Max Cutting Depth: Max Cutting Width: Wheel Size: Wheel Speeds: Blade Speeds: Blade Width: Blade Length: Table Tilt: Dust Collection Outlets: 1.5 HP, 110 V, 1 PH, 12.5 A 12 (304 mm) 13.5 (342 mm) 14 (355 mm) 588 & 840 RPM 2,300 & 3,250 LFM 1/8 to 3/4 (3mm to19 mm) 112 (2,844 mm) 16 x 20 (406 x 508 mm) 0o to 45o(right) 7o (left) 36 1/2 (927 mm) (2) 4 (101 mm) 25 x 15 (635 x 381 mm) 297 lbs (134 kg) European Design with Big Resaw Capacity 18 HD Deluxe Bandsaw (MI-91700) Max Cutting Depth: Max Cutting Width: Wheel Size: Wheel Speeds: Blade Speeds: Blade Width: Blade Length: Table Tilt: Dust Collection Outlets: Overall Dimensions: 3 HP, 220 V, 1 PH, 16 A 16 (406 mm) 17 (432 mm) 18 (457 mm) 500 & 840 RPM 2,820 & 3,936 LFM 1/4 to 1 1/2 (6 to38 mm) 153 (3,900 mm) 20 x 24 (508 x 610 mm) 0o to 45o(right) 37 3/8 (940 mm) (2) 4 (101 mm) 19 x 33 x 75 (635 x 381 x 1,905 mm) 605 lbs (275 kg) Continuous Duty 3 HP Motor
13 24 Heavy-Duty Helical Head Planer (MI-31753) ALSO AVAILABLE Main 15 HP, 220 V, 3 PH, 40 A Table 1/2 HP, 2 A / M3: 0.9A Feed 2 HP, 6.8 A / M3: 2.5A 35.5 x 25 1/4 (901 x 641mm) Max Planing Width: 24 (609 mm) Cutterhead Speed: 5,000 RPM Minimum Thickness: 11 3/4 (298 mm) Minimum Stock Length: 10 5/16 (268 mm) Maximum Cutting Depth: 1/8 (3.175 mm) Feed Speed: 16.5 to 72 LFM Dust Ports: 2 x 5 (127 mm) 2,550 lbs (1,156 kg) Helical Head with Carbide Inserts 16 Heavy-Duty Radial Arm Saw (MI-53400) Heavy-Duty & Loaded with Safety Features 3 HP, 220 V, 1 PH 4 HP, 220 V, 3 PH Blade Diameter: 16 (400 mm) Blade Arbor: 1 (25 mm) Crosscut Capacity: 24 (609 mm) Maximum Cutting Depth at 90 : 4 7/8 (124 mm) Maximum Cutting Depth at 45 : 2 1/2 (65 mm) Dado Capacity: 1 (25 mm) 32 (813 mm) Table Dimensions: 39 3/4 x 48 (1,010 x 1,220 mm) Overall Dimensions: 56 5/8 x 48 x 67 7/16 (1,439 x 1,220 x 1,713 mm) Shipping 799 lbs (363 kg) Net 572 lbs (260 kg) 14 Electronic Variable Speed Metal/Wood Bandsaw (MI-92100) Max Cutting Depth: Max Cutting Width: Wheel Size: Blade Speeds: Blade Width: Blade Length: Table Tilt: Dust Collection Outlets: 1 1/4 HP, 220 V, 1 PH 12 (304 mm) 13 1/2 (342 mm) 14 (355 mm) 150 to 3,000 LFM 3/8 to 1 (9 to 25 mm) 114 (2,895 mm) 16 x 20 (406 x 508 mm) -10o to 45o 36 (914 mm) (2) 4 (101 mm) 25 x 15 (635 x 381mm) 308 lbs (140 kg) Full Torque at Any Speed
14 ACCESSORIES Universal Mobile Base (MI-99001) Maximum Load: 50 lbs (250 lbs) Size Range for Machinery w/ Square Bases: 11 x 11 to 35 1/4 x 35 1/4 (279 x 279 mm to 895 x 895 mm) Size Range for Machinery w/ Rectangular Bases: 17 x 11 to 51 x 19 (431 x 279 mm to 1,295 x 482 mm) Cast-Iron Mitre Gauge (MI-99015) 550 lb Capacity Mitre Capacity: 60o (left/right) Steel Slide Bar: 3/4 (19 mm) T-Slo t: 29/32 (23 mm) Roller Table (MI-99020) T-Lock Fence Kit (MI & MI-99501) table board not included 250 lb or 500 lb Capacities Heavy-Duty Roller Table (MI-99021) With 32 or 50 Rail MI Short Rail MI Long Rail MagnaLock Deluxe Fence Kit (MI-99502) table board not included With 52 Rail Angular Mitre Gauge (MI-99520) 2 Independent rolling sides Triangular Design Adds Support
15 Best Value Guaranteed Tools For the Professional & Hobbyist Coquitlam Langley Abbotsford Chilliwack Kelowna Victoria Kamloops Calgary Grande Prairie Edmonton Red Deer kmstools.com Best Value Guaranteed We Will Beat Any Price, Right Down To Cost Web Sales Huge Selection We have the largest selection of tools & equipment anywhere Knowledgeable Service Experienced tool industry staff Industrial Sales Let our full team of professionals help with your commercial needs including insurance claims Financing Available Tool Clearance Centre Used Tools & Equipment Discontinued Damaged Goods Old Packaging Consignments / Trade-Ins Surplus Missing Parts Out Of Box Display Models TOOL CLEARANCE CENTRE Classes Welding & Bowl Turning Coquitlam Location Only C.A.R. Parts Just about any part you need for your Hot Rod or Restoration Project is in-stock, or available by special order Tool Corner Blog Check out our blog from Your Friends in the Tool Business for all the latest and greatest info on tools & equipment! Plus info on industry news or what is happening at KMS Gas Fills/Cylinder Sales Full gas filling service on all gas cylinders with gas fills - O 2, Ar, Ar/O 2, Acetylene & Tri Mix (coq only) We'll fill your cylinder while you shop Check your local store for availability Community Involvement Supporting local and international charities, car clubs, children's programs, and more, during every 3-Day Sale Events Show & Shine at KMS Coquitlam & Edmonton and Late Night Fridays at KMS Langley all through the summer Langley 5:30-9:00pm Late Night Fridays Follow Us Best Value Guaranteed Available in any amount, in-store or online kmstools.com Follow Us Tool Corner Automotive Construction Industrial Power Tools Welding Woodworking
10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationWOODWORKING & METALWORKING MACHINERY 2018 SPRING CATALOG
www.general.ca WOODWORKING & METALWORKING MACHINERY 2018 SPRING CATALOG 4.19.17 #10-005/10-005CF/10-005SCF M1 Dust collector - 1 HP General International General / General International product #10 005A
More informationJET FINISHING. Surface Grinders Bench Grinders Accessories
JET FINISHING Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE
More informationWOODWORKING MACHINERY
PRICE LIST NO. 56 Applying to the Complete Line of WOODWORKING MACHINERY SUPERSEDING AND CANCELLING ALL PREVIOUS ISSUES SUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE AUGUST 1, 2005 Over 84 Years of Continuous
More informationSANDERS AND ABRASIVES
22-44 PLUS DRUM SANDER Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload Patented conveyor belt
More information12" and 14" SAWS - 5 HP
12" and 14" SAWS - 5 HP MODEL K14SS These heavy-duty saws handle 2-1/2" solid round stock, 3" pipe with speed and efficiency. Extra-heavy Cast iron base, trunnion and arm. Sealed ball bearings, 1" wheel
More information8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP 10" WET SAW BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE. Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B
7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid round, 2" pipe. Adjustable
More information7" CUT-OFF SAW - 1 HP 10" SAWS - 3 HP 8" CUT-OFF SAW - 3 HP 10" WET SAW BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE
7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid round, 2" pipe. Adjustable
More informationSCAN TO VIEW WEBSITE
SCAN TO VIEW WEBSITE 7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid
More informationDRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm
DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20
More informationPower Equipment
Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:
More informationE M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM
E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM For a high-quality finish every time, experts rely on JET grinders, sanders and finishing machines. Because your complete satisfaction is
More informationUNIVERSAL PRODUCTION EDGE BELT SANDERS
UNIVERSAL PRODUCTION EDGE BELT SANDERS Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing
More informationElectric Power Tools Created :05 Revised :08 Page 1
2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric
More informationDIY (Personal Use Only)
1 DRILL ELECTRIC DRILL and IMPACT DRILL Standard Accessories KW0700026: 1pc Impact Drill 5pcs Masonry Drills 9pcs Twist Drills KW0700026 KW0701000 KW0701002 KW0701001 5pcs Grinding Stones 1pc Case KW0700026
More informationWoodworking Machinery Metalworking Machinery Air Compressors & More
Woodworking Machinery Metalworking Machinery Air Compressors & More 25-Feb-15 1 Who We Are History Table of Contents Organization Customer Base Operations Go GENERAL! General International Power Products
More informationBelt-and Disc Sanders ST-DS 300 M
Belt-and Disc Sanders ST-DS 300 M Sanders Powerfull Motors Self-adhesive abrasive discs Tiltable cast iron tables ST-DS 300 M ST-DS 300 M Article-no. 66.890.89002.11 230 V 750 W 735 W 1420 RPM Belt size
More information1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)
Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm
More informationM E T A L W O R K I N G
M E TA LW O R K I N G 2009/2010 JET: 50 years of experience 50 years of high-quality machines 1958 The foundation of JET The flight with the first Boeing jet aeroplane from Seattle (USA) to Japan with
More informationFINISHING. Finishing Index. Sanders Polishers Finishing Accessories
Finishing Index Sanders................... 33-34 Polishers...................... 34 Finishing Accessories........ 35-38 ACCESSORIES SPECIALTY PERCUSSIVE FINISHING ABRASIVE ASSEMBLY DRILLS The Best Way
More informationDust Collectors and Fume Exhausters
www.americanfan.com Bulletin DFM 1600 Dust Collectors and Fume Exhausters Howden Industrial Fan Group American Fan /Joy Fan /Garden City Fan Model DC DUST COLLECTOR The Model DC is a low cost packaged
More informationPhone: Toll Free: Main St. Millbank
DECEMBER UNTIL DEC 24, 2016 Phone: 519-595-4212 Toll Free: 1-866-595-5015 6980 Main St. Millbank Reg. $319 $549 Reg. $649 20V Max Compact Drill & Impact Driver Kit (1.5AH) 18V XRP 6-Tool Combo Kit $649
More informationJET FINISHING. Surface Grinders Bench Grinders Accessories
Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING
More informationCreusen Professional Floor-standing/Bench Drill Presses 8000
Creusen Professional Floor-standing/Bench Drill Presses 8000 A series of floor-standing and benchtop drill presses for the professional user featuring the qualitythat you can expect from Creusen. The models
More informationNote. Icons. Double Insulation. Variable Speed. Brake. Reversing. . New aesthetic design. Charger: . New aesthetic design. . Charging time: 60min
TOOL CATALOGUE 1 Index Cordless Driver Drill 1 MT070 1 MT90 3 Cordless Percussion Driver Drill 1 MT071 1 MT903 3 Cordless Impact Driver MT080 1 MT93 Drill MT081 1 MT9 Percussion Drill 3 MT191 5 MT961 3
More informationINDEX Hammers PICTOGRAPH. Drills. Drivers. Mixers. Grinders. Cutting Machines. Saws. Planers. Sanders. Sander Polishers.
INDEX Hammers Drills 2 Drivers Mixers 9 Grinders 15 Cutting Machines Saws 17 Planers Sanders 23 Sander Polishers 27 Other Machines High Pressure Washers 32 Vacuum Cleaners 36 Garden Tools PICTOGRAPH Double
More informationB DUAL DRUM SANDER
OWNER S MANUAL B2022-25 DUAL DRUM SANDER INDEX GENERAL SAFETY INSTRUCTIONS Page 3 Specifications Page 4 Features Page 5 Assembly Instructions Initial Assembly Page 6 Installing Abrasives Page 7 Adjusting
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationQuick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm Collet size: 6mm (1/4")
JTC-3101 M INI AIR DIE GRINDER JTC-3321 SPOT WELD CUTTER KIT JTC-3401 1/2" HEAVY DUTY AIR M INI IM PACT WRENCH Free speed: 25000 rpm Quick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm
More informationFast and Precise Rip Saws and Material Handling Systems
Fast and Precise Rip Saws and Material Handling Systems For solid wood cutting Kentwood rip saws and material handling for the woodworking industry 1 Quick Reference Overview 3 Rip Saws Professional Series
More informationTSi 150CC Compact Crawler SONIC DRILL RIG
,, US Patent XXXXXXXX TSi 150CC MODEL DESCRIPTION The TSi 150CC Sonic Drill Rig is a crawler mounted unit with a 225 HP (168 kw) diesel engine that powers all driving, drilling and accessory hydraulic
More informationWILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32
Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31
More informationPRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED
A L I F E T I M E O F R E L I A B I L I T Y PRODUCT GUIDE BROBO GROUP AND OWNED Certified System Quality ISO 91 TM All Brobo Machines & Parts include a 2 year Warranty S315D, S35D & S4B FERROUS METAL CUTTING
More informationUK RANGE CATALOGUE NEW 2016 RANGE
UK RANGE CATALOGUE 2016-17 NEW 2016 RANGE POWER TOOLS STATIONARY GARDEN TOOLS ACCESSORIES Purchase as a kit...or buy separately OUR ONE BATTERY FITS ALL FAMILY > > SAVE s > > SAVE s + + POWERS 14 POWER
More informationVW-18 OPTIONAL POWER TILT ADJUSTABLE CANTED HEAD
VERTICAL BAND SAWS VW-18 Photos may show optional equipment. OPTIONAL POWER TILT Allows the operator to enter a desired angle up to 60 in either direction and have the machine automatically move the head
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationHACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE
HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE HACKSAW MACHINE Coolant System Hydraulic Feeding Quick Clamping Vise Saw Size 14 Cutting Cap. 7 Saw Size 18 Cutting Cap. 10 Blade 10 KW1500415 CIRCULAR
More informationWhitton Supply. Woodworking Machinery. Air Filtration Jet Tools AFS-1000B 1000 CFM Air Filtration System 3 Speed with Remote Control
Air Filtration Jet Tools AFS-1000B 1000 CFM Air Filtration System 3 Speed with Remote Control Cycles per Inner Filter Speeds Timer Settings Motor Hour(20' x 20' x 8') Efficiency 708620B 19.58 1 556 / 702
More informationNEW. Smooth Play-Free Motion Superior Cut Quality Minimal Maintenance Machine Longevity
NEW Techno CNC Systems HD-II CNC Router is manufactured using global state-ofthe-art techniques with advanced engineering, workmanship and built to last with all steel construction and superior components
More informationMICHIGAN PNEUMATIC TOOL
MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders
More informationQuality tools at affordable prices
2010 Quality tools at affordable prices Over 45 years experience offering quality tools at affordable prices Power Tools Cordless Drills... 4-6 Corded Drills... 6-7 Multifunction Tools... 7 Table Saw...
More informationDual Post Horizontal Band Saw Model H-18A USAGÉE 2003 FABRICATION NORD AMÉRICAINE
FABRICATION NORD AMÉRICAINE PROMAX MACHINERIE INC. 255-N Chemin du Tremblay Boucherville, Québec, J4B 7M1 Tel : 1-877-761-0055 Fax : 1-450-641-3030 www.promaxmachinerie.com TECHNICAL SPECIFICATIONS Capacity
More informationFein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
More informationBrake Lathes and Accessories
Brake Lathes and Accessories Bosch Brake Lathes Faster. Better. Stronger. Faster: True one pass machining saves you time! Positive rake tooling to get OEM quality finish on a single pass Multi-speed motor
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationSPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm
BH 24 IE 24 MM SDS-Plus Rotary Hammer Powerful 800 watt motor 24 mm drilling capacity in concrete Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling
More informationATLAS. Smooth Play-Free Motion Superior Cut Quality Minimal Maintenance Machine Longevity
ATLAS EXTRAORDINARY VALUE & PERFORMANCE... Since 1986, Techno has provided economical CNC cutting solutions. Our engineering creativity has always yielded affordable, quality equipment. The new Atlas promises
More informationMETAL MACHINERY SOLUTIONS SAW SERIES
METAL MACHINERY SOLUTIONS Horizontal Metal Cutting Band Saws W1318S Features Swiveling head (for miter cutting) Built-in feed table (all models) Miter cutting up to 60 ; for WS-1318FA and WS-1824FA up
More informationCATALOG 2017
www.hpschou.com CATALOG 2017 PRESENTS A RANGE OF TOOLS Introducing the new Probuilder Power-tool concept The new Probuilder concept, one 18 V lithium battery platform for all Power-tools, designed for
More informationSeries B A N D S A W S. Armstrong-Blum Mfg. Co. Heavy Duty Vertical Production Band Saw Capacity 20 x TiltLeft and Right Servo Drive Bar Feed
Armstrong-Blum Mfg. Co. B A N D S A W S Heavy Duty Vertical Production Band Saw Capacity 20 x 25 60 TiltLeft and Right Servo Drive Bar Feed Series 2125 w w w.sawing.com Armstrong-Blum Mfg. Co. SERIES 2125
More information.com .cantekamerica 1300DA Heavy Duty Models (Micro-computer controlled with digital readout)
D Type A Type DA Type DDA Type DAA Type INSUFFICIENT PRESSURE PROTECTION In case insufficient working air pressure occurs, the machine brakes automatically. CHECK THESE OUTSTANDING STANDARD FEATURES Rugged
More informationPIPE CUTTERS. Service (Std) WT Soil Pipe XH Soil Pipe No-Hub Tile / Clay Weight
PIPE CUTTERS 590 AND 591 MANUAL PIPE CUTTER Service (Std) WT Soil Pipe XH Soil Pipe No-Hub Tile / Clay Weight 590-6 1 1 / 2 " 6" (38mm 150mm) 1 1 / 2 " 5" (38mm 125mm) 1 1 / 2 " 6" (38mm 150mm) 4" 6" (100mm
More informationABOUT. In 1973 Baertec Machinery took its place in Bursa Industry by producing Aluminium and Pvc & Metal Processing Machinery.
ABOUT US In 1973 Baertec Machinery took its place in Bursa Industry by producing Aluminium and Pvc & Metal Processing Machinery. In 1973 Baertec Machinery took its place in Bursa Industry by producing
More informationBosch Blue Power. Wood Professionals R EC2. Valid from 1st February to 30th April 2013
Bosch Blue Power Valid from 1st February to 30th April 2013 Wood Professionals Industrial Jigsaws + 16 FREE Blades GST 150CE / GST 150BCE Professional The most powerful Jigsaw in its class. } High power
More informationOur most popular press model. features. specifications model number capacity H-FRAME PRESSES. Hand operation for economical performance.
H-FRAME PRESSES Our most popular press model. Hand operation for economical performance. Rapid ram return starts as soon as release valve is opened and may be stopped at any point by closing the valve.
More informationSURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders
SURFACE GRINDERS PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 SURFACE GRINDERS A Line of Precision Low-cost, High Performance Surface Grinders Precision Manual Surface Grinders Precision Hydraulic
More informationWIN A WEBER Q2000 BARBEQUE & PORTABLE CART IN TIME FOR THE HOLIDAYS
WIN A WEBER Q2000 BARBEQUE & PORTABLE CART IN TIME FOR THE HOLIDAYS SPEND 50+ AT YOUR LOCAL POWERTOOL CENTRE STORE & ENTER IN THE DRAW BEFORE 20TH DECEMBER * *T & C apply Prizes drawn 20.12.18 One prize
More informationKST 16 KST 16V KST 25 KSS 25V KSS
F KST 16V shown KSS 32 shown 186 Industrial Drill Presses KST KSS Rigid table (KST) and column drill presses (KSS) with large work tables Specifications KST 16 KST 16V KST 25 KSS 25V KSS 32 drilling capacity
More informationRYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET
RYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET 1 FIGURE A 36 26 25 24 SEE FIGURE B 23 27 20 28 29 30 35 31 37 33 2 10 22 11 12 9 21 13 14 17 16 15 32 18 31 19 34 SEE FIGURE D 8 6 5 4 2
More informationTABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING
TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING Page DEFINITIONS...7-1 SAFEGUARDS...7-1 GUARDING...7-2 PULLEYS, BELTS AND BELT-SHIFTERS...7-3 CONTROLS...7-3 FLYWHEELS...7-3 GRINDING WHEELS...7-3
More informationExtraordinary Value & Performance Since 1986, Techno, has provided economical CNC cutting solutions. The new HDS Series promises to follow suit.
The HDS CNC Router is manufactured using global state-of-the-art techniques with advanced engineering and workmanship and built to last with all steel construction and superior components such as precision
More informationCLK Series Air Chain Hoist Distributed by Tri-State Equipment Company Inc. Web:
CLK Series Air Chain Hoist Distributed by Tri-State Equipment Company Inc. Email: sales@tsoverheadcrane.com Web: www.tsoverheadcrane.com PH: 314-869-7200 FAX: 314-869-7226 Industry-leading durability,
More informationCOMPETENCE IN PRECISION AND QUALITY HOLE SAWS
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard
More informationTHINK KING WHEN RENOVATING Spring &
THINK KING WHEN RENOVATING Spring & Brettwood Machinery Works Ltd. Find us on: Facebook, Google+ & YouTube Summer 2018 ULTRA-QUIET OIL-FREE KC-1410A 125 PSI maximum tank pressure ASME safety valve 1/4
More informationCNT-950 Series Machine Pricing
The CNT-950 Series CNC Router Packages include the following features: Bridge, Table and Z-Head; Router Spindles and Dust Boots; Electronics, Servo Motors and Drives; Thru-vacuum Hold-Down System; Computer,
More informationPOWER TOOLS 08. designed to do more. Dealer stamp: Ryobi Technologies (UK) Limited Medina House, Fieldhouse Lane, Marlow, Bucks.
designed to do more POWER TOOLS 08 Ryobi Technologies (UK) Limited Medina House, Fieldhouse Lane, Marlow, Bucks. SL7 1TB Tel: 01628 894 400 Fax: 01628 894 401 Email: sales@ryobipower.co.uk Web: www.ryobipower.co.uk
More informationULTRA-QUIET OIL-FREE AIR COMPRESSOR KC-1410A
HOLIDAY SAVINGS Find us on: Facebook, Google+ & YouTube RETRACTABLE AIR HOSE REEL WITH HYBRID POLYMER AIR HOSE K-5038FRL 50 ft. x 3/8 All-Weather Flexibility (-40ºC to 65ºC) Comes with wall mounting hardware
More informationCNC Double Column Machining Center. SDV-H Series SDV Series.
CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear
More informationNEW BELT & 8 DISC SANDER
HOLIDAY SAVINGS 2015 Manual brake quickly stops sanding disc Solid cast-iron body and steel base add stability and minimize vibration Integral 1-3/4 belt and 2 disc dust ports for shop vacuum hook-up $129.
More informationMT07 MT03 MHS100AG MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MEASURING TAPES MEASURING TAPES HEAVY DUTY DELUXE TYPE HACKSAW W/12" H.S.S.
MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MT07 ITEM NO. MT03 MEASURING TAPES HIGH IMPACT ABS CASE W/ RUBBER PROTECTED RUBBER COVERED CASE, COMFORTABLE SIZE MEASURING TAPES INNER PC/BOX PACKING
More informationequipment December January 2015 Prices do not include freight. Specifications, prices & availability are subject to change without notice.
December 2014 - January 2015 WWOORRKKSSHHOOPP equipment 3 A351.25 7 9 B006 3.95 34 1,0 4 44 85 11. W 8 68 81 53 121 M.45 5 3 3,4 L6.45 1,6 0 40 D1.25.50 159 A368 6 0 T738 19 A 34.35 70 92. 9.60 6 3 L107
More informationFein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
More information5 YEARS WARRANTY QUALITY & DURABILITY TESTS
5 YEAR WARRANTY 5 YEARS WARRANTY The quality of Powerplus XQ is highlighted by a warranty of no less than 5 years! This unique warranty advantage assures you that you made the right purchase and allows
More informationRAS-5E PART NO Date: 04/08/02
33-400, 33-401, 33-402, 33-403 14 RADIAL SAWS 33-410, 33-411, 33-412, 33-413 16 RADIAL SAWS 33-420, 33-421, 33-422, 33-423 18 RADIAL SAWS RAS-5E PART NO. 424-03-651-0018 Date: 04/08/02 Page1/ RAS-5E /DEB
More informationnew (2 X 1.3) 10 JOBSITE SAW WITH FOLDING STAND
SPRINg & summer savings 2014 ULTRA-QUIET OIL-FREE AIR COMPRESSORS new new 1.6 GALLON 2 HP (PEAK) (60 Decibels) 2 HP (PEAK) (60 Decibels) KC-1620A KC-4620A Light weight aluminum tank(s) 3.80 CFM @ 40 PSI
More informationUNDER-FLOOR WHEEL LATHE
Delta Manufacturing Address: 3707 19 th Avenue North, Escanaba, MI 49829 Phone: 906-233-1500 Fax: 906-233-1555 www.deltamfg.net 1 st Edition MACHINE OPERATION SPECIFICATIONS: Machine Function Simultaneous
More informationMachining Centre. CNC Lathes. Machining Centre, CNC Mills and Lathes, Turret Mills, Drills, Saws & Miscellaneous
Machining Centre, CNC Mills and Lathes, Turret Mills, Drills, Saws & Miscellaneous Machining Centre End of Line Gate Eclipse VMC-610 Vertical Machining Centre 3 Axis Anilam 6000M control Year of Manufacture:
More informationMachines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight
44 Dough Dividing & Moulding Machine Machines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight precision, solid design,
More informationDYNATECH INDUSTRIES PVT LTD
DYNATECH INDUSTRIES PVT LTD MCD SERIES Mobile core Drill MODEL MCD40 TECHNICAL SPECIFICATIONS Product Introduction DynatechIndustries MobileCoreDrill- MCD40 is a Underground versatile Tyre Version heavy
More informationTop Side Door Door Model Work Area Height Door Options Opening Opening Gun Options Weight
FLOOR MODEL STEEL CABINETS 40403 40413 Standard Features for All Models 100 CFM dust collector included with all steel cabinets HD 14 gauge steel - welded seams Full width top door Optional additional
More informationPortable work- and clamping system
CROC LOCK Portable work- and clamping system An amazing work bench for many applications such as for example holding doors, fences, wood, ceiling boards, bikes, metal, automotive components and many other
More informationInjection Logo (Optional) To improve brand and product image. Soft Grip For comfortable use and higher working efficiency
The range covers full range of portable power tools, including Cordless Screwdriver, Cordless Drills, Impact Drills, Impact Wrench, Rotary Hammers, Demolition Hammer, Angle Grinders, Sanders, Jig Saws,
More informationAccessories: Dust collector. Slope winch. Bit grinder Application: Water wells
Deltabase 430 - DTH drill rig Deltabase 430 - DTH drill rig Deltabase 430 is a compact, lightweight drill rig especially designed for DTH work on modern job sites. The DB 430 is optimised to drill 4 to
More informationBS-10LS - Swivel Head Metal Cutting Band Saw 468 x 250mm (W x H) Rectangle Capacity
BS-10LS - Swivel Head Metal Cutting Band Saw 468 x 250mm (W x H) Rectangle Capacity Ex GST Inc GST $4,890.00 $5,379.00 ORDER CODE: MODEL: Operation Type: Round @ 90º (mm): Round @ 45º (mm): Round @ 60º
More informationPrecision Radial Arm Drills
Precision Radial Arm Drills TPR-720A TPR-820A TPR-920A TPR-1100 TPR-1230 TPR-1250A TPR-C1600 TPR-1600H TPR-C2500 www.kentusa.com TPR-720A-1100 / 1230 / 1230H Adopts mechanic switch with forward / reverse
More informationCNC Vertical Machining Centers
CNC Vertical Machining Centers The Best Valued VMC in the Market Today... Take a Minute and Compare Whatever the requirement there is a Storm VMC for Every Application Storm CNC Vertical Machining Centers
More informationABOVE-FLOOR WHEEL LATHE
Delta Manufacturing Address: 3707 19 th Avenue North, Escanaba, MI 49829 Phone: 906-233-1500 Fax: 906-233-1555 www.deltamfg.net 1 st Edition MACHINE OPERATION SPECIFICATIONS: Machine Function Simultaneous
More informationFerax newsletter
Ferax newsletter 2010-07 1 COMPRESSED AIR Quick couplings Quick couplings with hose connection Quick couplings with male thread Quick couplings with female thread Insert nipple with hose connection Insert
More informationhole saws 260 PRECISION TOOLS
HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,
More informationBrake Lathes and Accessories
Brake Lathes and Accessories Choose a Lathe BL 8922L Essential Features: Positive rake tooling yields one pass finish with single cut every time Machines most drums, flywheels, and all types of rotors
More informationMulti-Purpose Milling Machine
Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,
More informationQP-L Series. High Speed Vertical Machining Center QP1620-L 2033-L 2040-L QP2440-L 2560-L
QP-L Series High Speed Vertical Machining Center QP16-L 33-L 40-L QP2440-L 2560-L QP-L Series High-Speed Vertical Machining Center Engineered for Precision, High Accuracy and Efficiency. Machine Features
More informationCutting, Drilling and Beveling
Pipe Hole Cutter JK150 The Hongli Model JK150 pipe hole cutter is designed to cut holes up to 152mm into steel pipe. The multiple hole sizes allow the use of Mechanical fittings for branching unpressurized
More informationThink KING when RENOVATING
Find us on: Think KING when RENOVATING THIS SPRING & SUMMER 2019 Proudly Canadian 1983-2018 2000W GASOLINE DIGITAL INVERTER GENERATOR KCG-2001i Sine wave digital inverter generator provides stable current
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationEDVC Velocity and Feed Controllers
EDVC Velocity and Feed Controllers Hydraulic Speed/Feed Controllers from Enertrols are selfcontained sealed units designed for precise control of speed in both directions of travel. The travel speed can
More informationIn Stock superabrasive tooling EXPRESS LINE.
In Stock superabrasive tooling EXPRESS LINE www.abrasive-tech.com INTRODUCTION Welcome to Abrasive Technology s Express Line Catalog This catalog is a listing of standard products that we carry in stock
More informationJIH-I MACHINERY CO., LTD. A Professional Manufacturer of Metal working Machinery, Non-ferrous Metal working Machinery, Aluminum, pvc door and Window
JIH-I MACHINERY CO., LTD. A Professional Manufacturer of Metal working Machinery, Non-ferrous Metal working Machinery, Aluminum, pvc door and Window working machinery. JIH-CNC MACHINING CENTER SERIES JIH-CNC
More information