PRODUCT RANGE. since 1969

Size: px

Start display at page:

Download "PRODUCT RANGE. since 1969"

Maximilian Gibbs
6 years ago
Views:

1 PRODUC RNGE June anteo anniversar y since 1969

2 More than tail- worldwide

1969 2009 anteo anniversar y Know How - From 1969 Founded in 1969, nteo now produce the widest range of advanced loading tail available worldwide thanks to the experience developed over many

In 1989 nteo started tail-lift production and rapidly achieved outstanding the national and international recognition, soon becoming world leaders in the design and production of tail.

3 anteo anniversar y Know How - From 1969 Founded in 1969, nteo now produce the widest range of advanced loading tail available worldwide thanks to the experience developed over many years in the design and production of hydraulic components for the major European machinery manufacturers. In 1989 nteo started tail-lift production and rapidly achieved outstanding the national and international recognition, soon becoming world leaders in the design and production of tail. he factors that contributed and contribute still today to the enlargement of nteo s product image in the world are: - a wide range; - solutions that anticipate the costumer needs; - a high safety level; - reliability over time; - high quality components; - checks and tests on the finished products. 1

nteo, a passion for reliability nteo s considerable design capacity is one of the fundamental pillars for producing highly

- 3D designs together with structural calculations and finished components; - prototypes are fully tested with 50,000

over components and details; - Use of electrical parts without electronic components, which are much less sensitive to

production line to the final function tests carried out on all tail- before they are packed and dispatched to customers.

4 nteo, a passion for reliability nteo s considerable design capacity is one of the fundamental pillars for producing highly reliable products. - 3D designs together with structural calculations and finished components; - prototypes are fully tested with 50,000 fatigue cycles before the large-scale production is started; - Capacity to devise simple but functional designs; - Care over components and details; - Use of electrical parts without electronic components, which are much less sensitive to faults and are easy to maintain; - Strict controls start with the incoming raw materials and continue along the whole production line to the final function tests carried out on all tail- before they are packed and dispatched to customers. dvanced technology he industrial spirit of a leading-edge company which is always on the move and in search of new manufacturing technologies. ll the tail- main structures and most of the components are manufactured in the 3 nteo factories that offer customers a rapid and very flexible service. he personnel are highly qualified and constantly receive training to update their skills. hey use automatic robotized FMS machines so that a consistently high level of product quality can be maintained. 2

ll hydraulic steel parts are treated with KL hexacrylic

standardization - ll pins are made using steel which is

- Bushings have been treated so that they do not require

- Sandblasting, washing with phosphate liquids, painting and drying

resistance and a quality of finishing which has always

- Standardization of all electro-hydraulic components so that the

5 ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis Use of high quality components and standardization - ll pins are made using steel which is chromium-plated or treated with electrocataphoresis. - Bushings have been treated so that they do not require lubrication. - Rods with high corrosion-resistant chromium plating. - Sandblasting, washing with phosphate liquids, painting and drying at high temperature are processes which guarantee high corrosion resistance and a quality of finishing which has always distinguished nteo s products. - Standardization of all electro-hydraulic components so that the same valves and electric motors are used throughout the range, and the use of electric circuits without electronic parts are synonymous with quality and efficient post-sales service. 3

4 Cantilevers with PIEK Certificate F3 CLP 10-15-20-30 special cantilevers

It includes a silent power pack, sound-deadening platform coating and

Safety always comes first for nteo ll tail- are equipped with safety systems

comprising: - Control Panel made of shock-resistant material, requiring a

Electric motor with a thermal safety device which blocks the tail-lift in

limit the lowering speed in case of a pipe and/or valve burst; - Safety

the lowering phase until the platform reaches the ground; - utomatic tilting

night use; - Flags on the platform; - User operating area marked on the

6 4 Cantilevers with PIEK Certificate F3 CLP special cantilevers 1000 to 3000kgs capacity for quiet deliveries and night time operations. It includes a silent power pack, sound-deadening platform coating and automated trolley stops. Safety always comes first for nteo ll tail- are equipped with safety systems compliant with the 89/392 EEC standard and are supplied as a full kit comprising: - Control Panel made of shock-resistant material, requiring a 2-handed use (illuminated); - Silent sound-proofed hydraulic unit; - Electric motor with a thermal safety device which blocks the tail-lift in case of overheating; - Flow control valves integrated in the cylinders to limit the lowering speed in case of a pipe and/or valve burst; - Safety solenoid valves on every hydraulic cylinder; - ilt cylinders locked during the lowering phase until the platform reaches the ground; - utomatic tilting of the platform at ground level; - Back-lit remote and radio controls for night use; - Flags on the platform; - User operating area marked on the platform; - EEC type-approved tail- including antiunderrun bumper; - EC conformity mark - Operation and maintenance manual and tail-lift functional testing certificates included.

Service End users, large distribution fleets,

widespread and professional nteo Service Centre

and customer support with spare part depot; -

maintenance, repairs; - Delivery of tail- and

- heoretical and practical training on assembly,

accordance with EC regulations; - echnical

7 Service End users, large distribution fleets, carriers and assemblers can count on a widespread and professional nteo Service Centre network with a wide range of services: - Sales and customer support with spare part depot; - echnical support: assistance, planned maintenance, repairs; - Delivery of tail- and components; - ssembly and support for assembly; - heoretical and practical training on assembly, maintenance, repairs and regular inspections in accordance with EC regulations; - echnical support with supply of installation drawings; - Multi-function Website where you will find many services for customers as well as for the nteo sales and support network. 5

NEWS 2009 F3 CL30 page 19 F3 R page 33 F3HD IVF page 38 F3HD VS page 39 F3HD VSL page 40 F3HD IV page 41 panel van F3 IV 032 - F3 IV 050 page 7 F3 RE 032 page 8 F3 V050 page 9 F3V 075 page 10

F3 RE/CC page 22 F3 RE/M page 23 F3 RE/CM - COMPC page 24 F3 RE30 CC page 25 F2 B page 26 F3 RE-CL/CC page 27 F2 LR page 28 tuckaway REP LR page 29 REP/1 page 30 REP/2 - REP/4 page 31 COLUMN IL LIFS

8 NEWS 2009 F3 CL30 page 19 F3 R page 33 F3HD IVF page 38 F3HD VS page 39 F3HD VSL page 40 F3HD IV page 41 panel van F3 IV F3 IV 050 page 7 F3 RE 032 page 8 F3 V050 page 9 F3V 075 page 10 cantilever F3MH F3MHX 075 page 11 F3M F3M 10 page 12 F3 CL 075 page 14 F3 CL page 16 F3 CL FRIDGE page 17 F3 CL30 page 18 F3 CL30 page 19 REP CL 05 LR page 20 retractable RCE 075 page 21 F3 RE/CC page 22 F3 RE/M page 23 F3 RE/CM - COMPC page 24 F3 RE30 CC page 25 F2 B page 26 F3 RE-CL/CC page 27 F2 LR page 28 tuckaway REP LR page 29 REP/1 page 30 REP/2 - REP/4 page 31 COLUMN IL LIFS F3 CO page 32 RMPS F3 R page 33 OPIONS page 34 6 access for disabled persons F3 HD IVFL page 37 F3 HD IVF page 38 F3 HD VS page 39 F3 HD VSL page 40 F3 HD IV page 41 F3 HD RE page 42 SEPS page 43 OPIONS page 44

F3 IV 032 - F3 IV 050 INERNL IL-LIF - SNDRD PLFORM CLSSIC VERSION FOR COMMERCIL PNEL VNS load capacity: 320-500 kg FUUR ECHNICL D PPLICIONS he F3HD IV 032 tail-lift has been designed for van derived

Renault RFIC Volkswagen CRFER In order to avoid that sudden size changes from the vehicle manufacturers do not allow the tail-lift installation, we recommend checking the available space on the

9 F3 IV F3 IV 050 INERNL IL-LIF - SNDRD PLFORM CLSSIC VERSION FOR COMMERCIL PNEL VNS load capacity: kg FUUR ECHNICL D PPLICIONS he F3HD IV 032 tail-lift has been designed for van derived vehicles, especially: Citroen JUMPER Citroen RELY Fiat DUCO Ford OURNEO Ford RNSI Iveco DILY Mercedes Benz SPRINER Nissan INERSR Nissan PRIMSR Opel MOVNO Opel vivro Peugeot boxer COMBI Renault MSER Renault RFIC Volkswagen CRFER In order to avoid that sudden size changes from the vehicle manufacturers do not allow the tail-lift installation, we recommend checking the available space on the vehicle as regards to the overall dimensions of the tail-lift. F3IV F3IV F3IV E B B V L W W Z WEIGH SRING 145 kg! panel van SFEY DEVICES - BERY DISCONNEC DEVICE WIH KEY MIN SWICH - OE GURD PROECION BRIDGE PLE SNDRD FEURES - INERNL CONROL WIH SPIRL CBLE - PLFORM OF LUMINIUM OVERLY ON SEEL FRME WIH FIXED FRON RMP OPIONS - RDIO CONROL - HINGED RMP/SOP F3IV F3IV F3IV MX LOD CPCIY Kg WEIGH Kg MX POWER CONSUMPION 12 V mp V mp UP-SROKE SPEED (FULL LOD) m/min DOWN-SROKE SPEED (FULL LOD) m/min OIL NK CPCIY l 1,8 1,8 1,8 ELECRIC MOOR POWER 12 V Watt V Watt WORKING PRESSURE bar NOISE LEVEL (**) db <70 <70 <70 ** Equivalent continuous () weighted noise pressure level, in the working place. HE BOVE MENIONED COMPONENS RE INDICIVE ND MY VRY S REGRDS O HE PERFORMNCE. NEO RESERVES HE RIGH O CHNGE HE WEIGH ND HE ECHNICL SPECIFICIONS WIHOU PRIOR NOICE. NO INDEMNIY FOR DMGES MY BE CLIMED FROM NEO FOR ECHNICL SPECIFICION ND WEIGH CHNGES OR FOR INSLLION PROBLEMS DUE O LCK OF SPCE ON HE FOLLOWING VEHICLES. 7

panel van F3 RE 032 UNDER CHSSIS RERCBLE IL-LIF (electric deployment and stowage) VERSION FOR COMMERCIL PNEL VNS load capacity: 320 FUUR PPLICIONS he F3HD IV 032 tail-lift has been designed for van

Renault MSER Renault RFIC Volkswagen CRFER In order to avoid that sudden size changes from the vehicle manufacturers do not allow the taillift installation, we recommend checking the available space

ECHNICL D 8 F3RE 032-1100 F3RE 032-1200 MX LOD CPCIY Kg 320 320 WEIGH Kg 140 145 MX POWER CONSUMPION 12 V mp 100 100 24 V mp 50 50 UP-SROKE SPEED (FULL LOD) m/min 5 5 DOWN-SROKE SPEED (FULL LOD)

10 panel van F3 RE 032 UNDER CHSSIS RERCBLE IL-LIF (electric deployment and stowage) VERSION FOR COMMERCIL PNEL VNS load capacity: 320 FUUR PPLICIONS he F3HD IV 032 tail-lift has been designed for van derived vehicles, especially: Citroen JUMPER Citroen RELY Fiat DUCO Ford OURNEO Ford RNSI Iveco DILY Mercedes Benz SPRINER Nissan INERSR Nissan PRIMSR Opel MOVNO Opel vivro Peugeot boxer COMBI Renault MSER Renault RFIC Volkswagen CRFER In order to avoid that sudden size changes from the vehicle manufacturers do not allow the taillift installation, we recommend checking the available space on the vehicle as regards to the overall dimensions of the tail-lift. ECHNICL D 8 F3RE F3RE MX LOD CPCIY Kg WEIGH Kg MX POWER CONSUMPION 12 V mp V mp UP-SROKE SPEED (FULL LOD) m/min 5 5 DOWN-SROKE SPEED (FULL LOD) m/min 6 6 OIL NK CPCIY l 1,8 1,8 ELECRIC MOOR POWER 12 V Watt V Watt WORKING PRESSURE bar NOISE LEVEL (**) db <70 <70 SFEY DEVICES - BERY DISCONNEC DEVICE WIH KEY MIN SWICH - OE GURD PROECION BRIDGE PLE SNDRD FEURES - INERNL CONROL WIH SPIRL CBLE - PLFORM OF LUMINIUM OVERLY ON SEEL FRME WIH FIXED FRON RMP OPIONS - RDIO CONROL - HINGED RMP/SOP ** Equivalent continuous () weighted noise pressure level, in the working place. HE BOVE MENIONED COMPONENS RE INDICIVE ND MY VRY S REGRDS O HE PERFORMNCE. NEO RESERVES HE RIGH O CHNGE HE WEIGH ND HE ECHNICL SPECIFICIONS WIHOU PRIOR NOICE. NO INDEMNIY FOR DMGES MY BE CLIMED FROM NEO FOR ECHNICL SPECIFICION ND WEIGH CHNGES OR FOR INSLLION PROBLEMS DUE O LCK OF SPCE ON HE FOLLOWING VEHICLES.

F3 V050 IL-LIF FOR PNEL VNS - 2 CYLINDERS load capacity: 500 kg WEIGH SRING 179 kg!

5 ton panel van range and can be installed easily without modifications to the host vehicle. Installation is made quick and easy with individual mounting brackets for most vans.

boxer Renault MSER Renault RFFIC VolksWagen CRFER VolksWagen RNSPORER ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis Load Capacity Voltage Max Power

Width Weight for Complete ail-lift with Platform Depth 1400 mm 500 kg 12 V 130 mp 140 bar 5 m/min 8 m/min 2 litres < 70 db 1600 Watt 1400 mm - 1600 mm 1450 mm 179 kg Bolted assembly plates

11 F3 V050 IL-LIF FOR PNEL VNS - 2 CYLINDERS load capacity: 500 kg WEIGH SRING 179 kg! panel van LIGH COMMERCILS PPLICIONS he completely new cantilever tail-lift F3 V050 has been designed and built for the 3.5 ton panel van range and can be installed easily without modifications to the host vehicle. Installation is made quick and easy with individual mounting brackets for most vans. F3 V050 is especially designed for: Citroen JUMPER / RELY Fiat new DUCO Ford new RNSI Iveco DILY Mercedes new SPRINER Mercedes vio Nissan INERSR Nissan PRIMSR Opel MOVNO Opel vivro Peugeot boxer Renault MSER Renault RFFIC VolksWagen CRFER VolksWagen RNSPORER ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis Load Capacity Voltage Max Power Consumption Max Pressure Valve Setting Up-stroke Speed (Full Load) Down-stroke Speed (Full Load) Oil ank Capacity Noise Level Electric Motor Power Standard Platform Depth Standard Platform Width Weight for Complete ail-lift with Platform Depth 1400 mm 500 kg 12 V 130 mp 140 bar 5 m/min 8 m/min 2 litres < 70 db 1600 Watt 1400 mm mm 1450 mm 179 kg Bolted assembly plates Weight for Complete ail-lift with Platform Depth 1600 mm Mounting Platform Opening 185 kg Bolted assembly plates Powered opening of the platform with 1 double-acting tilting cylinder nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight. 9

panel van F3V 075 IL-LIF FOR PNEL VNS - 4 CYLINDERS load capacity: 750 kg WEIGH SRING 190 kg! LIGH COMMERCILS PPLICIONS he classic F3V 075 tail lift has been designed for factory panel vans above 3.

F3V 075 is especially designed for: Iveco Mercedes Renault DILY vrio MSCO ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis ECHNICL D B W 58 B W rm Length (mm) rm Width W58

12 panel van F3V 075 IL-LIF FOR PNEL VNS - 4 CYLINDERS load capacity: 750 kg WEIGH SRING 190 kg! LIGH COMMERCILS PPLICIONS he classic F3V 075 tail lift has been designed for factory panel vans above 3.5 tonnes. F3V 075 is especially designed for: Iveco Mercedes Renault DILY vrio MSCO ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis ECHNICL D B W 58 B W rm Length (mm) rm Width W58 (mm) E E F3V075C F3V075C Load capacity (centre of gravity at 600 mm) 750 Kg Standard Platform Dimensions Weight * Kg E B B Depth Width max min max min min * on demand *Indicative weight of tail-lift supplied in kit with a 1400 mm depth platform. he weight may vary according to width. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight.

F3MH 075 - F3MHX 075 HLF LIF - 2 CYLINDERS load capacity: 750 kg LIGH COMMERCILS ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis F3MH 075 F3MHX 075 PPLICIONS he classic

he particularly slim arms allows the fitting on very narrow vans of 2000mm/2100mm (van minimum width to be checked according to chassis width). SNDRD EQUIPMENS PLFORM - Platform in aluminium alloy.

13 F3MH F3MHX 075 HLF LIF - 2 CYLINDERS load capacity: 750 kg LIGH COMMERCILS ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis F3MH 075 F3MHX 075 PPLICIONS he classic F3M range of tail has been designed for bodied chassis cab vehicles with floor heights up to 1225mm. he particularly slim arms allows the fitting on very narrow vans of 2000mm/2100mm (van minimum width to be checked according to chassis width). SNDRD EQUIPMENS PLFORM - Platform in aluminium alloy. MECHNICL FUNCIONS - Mechanical hydraulic tilting of platform to ground. - ilt of platform in all positions. - nti-friction self-lubricating bushings and chromed pins. - Platform opening with 1 single-acting tilting cylinder and spring. HYDRULIC CHRCERISICS Compact power pack equipped with: - closing seal. - 1 single-acting lifting cylinder with lubrication. - 1 single-acting tilting cylinder. - Built-in safety solenoid valves on every cylinder. - ank with air filter. - Chrome-plated steel cylinder rods with high yield limit. - Flow adjusters compensated on all downward movements. CONROLS - External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - wo-hand use for operator s safety. - Motor with thermal safety device. - Motor relay with 80 silver pin (peak current). MOUNING With an adjustable bolted bracket and a bracket that has already been factory-welded in a fixed position. Quick fitting: rear bumper already bolted in 2 parts. PRODUC FINISHING - Material conform to EC standards. - Hard chromium-plated steel pins. - nti-friction self-lubricating bushings. - Delivered fully assembled and tested, it is to be mounted to the chassis by bolting, eliminating need to repaint. cantilever Load capacity Standard Platform Weight* E B (center of gravity Dimensions Kg at 600 mm) Depth Width min. max. max. min. F3MH 075 C Kg 1400* on demand F3MH 075 H *Indicative weight of tail-lift supplied in kit without rear bumper and with a 1400 mm depth platform. he weight may vary according to width. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight. 11

cantilever 12 F3M 075 - F3M 10 CNILEVER IL-LIFS - 2 CYLINDERS load capacity: 750 kg - 1000 kg LIGH COMMERCILS ECHNICL D Load capacity (center of gravity at 600 mm) Bolted brackets Standard Platform

14 cantilever 12 F3M F3M 10 CNILEVER IL-LIFS - 2 CYLINDERS load capacity: 750 kg kg LIGH COMMERCILS ECHNICL D Load capacity (center of gravity at 600 mm) Bolted brackets Standard Platform Dimensions Weight* Kg E B Depth Width min. max. max. min. F3M 075 C Kg 1400* on demand F3M 075 H F3M 10 H 1400* Kg 1600 on demand F3M 10 HS *Indicative weight of tail-lift supplied in kit without rear bumper and with a 1400 mm depth platform. he weight may vary according to width. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight. WEIGH SRING KG 234! ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis PPLICIONS he classic F3M range of tail has been designed for bodied chassis cab vehicles. Dedicated mounting brackets are available for every vehicle type. he assembly is quick, simple and does not require any modification to the chassis. F3M 075 and F3M 10 are especially designed for: Citroën JUMPER Fiat DUCO Ford RNSI Iveco DILY Mercedes SPRINER Nissan CBSR Nissan LEON Peugeot boxer VolksWagen L/CRFER SNDRD EQUIPMENS PLFORM - Platform in aluminium alloy. MECHNICL FUNCIONS - Mechanical hydraulic tilting of platform to ground. - ilt of platform in all positions. - Platform opening with 1 single-acting tilting cylinder and spring. HYDRULIC CHRCERISICS Compact power pack equipped with: - closing seal. - 1 single-acting lifting cylinder with lubrication. - 1 single-acting tilting cylinder. - Built-in safety solenoid valves on every cyl. - ank with air filter. - Chrome-plated steel cylinder rods with high yield limit. - Flow adjusters compensated on all downward movements. CONROLS - External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - wo-hand use for operator s safety. - Motor with thermal safety device. - Motor relay with 80 silver pin (peak current). CHOICE OF MOUNING djustable bolted brackets. Installation is made quick and easy with individual mounting brackets for every van. F3M 075: aluminium rear-bumper bolted to the arm. F3M 10: rear-bumper in 3 pieces bolted to the main beam. PRODUC FINISHING - Material conform to EC standards. - Hard chromium-plated steel pins. - nti-friction self-lubricating bushings. - Delivered fully assembled and tested, it is to be mounted to the chassis by bolting, eliminating need to repaint.

5 VERSIONS ND VRIOUS SOLUIONS CCORDING O WHEEL BSE ND OVERHNG F3M 075 - F3M 10 are available for all vehicles with double C chassis.

15 5 VERSIONS ND VRIOUS SOLUIONS CCORDING O WHEEL BSE ND OVERHNG F3M F3M 10 are available for all vehicles with double C chassis. cantilever ON-OFF POWER UNI F3M 075 can be installed on all vehicles with top hat section chassis and vans. FL PUSH-BUON PNEL Citroën Fiat Peugeot JUMPER DUCO BOXER F3M 075 Quick fitting without making holes in the chassis using the original holes. Note: he instructions reported refer to vehicles with original chassis that have not been lengthened. If the chassis has been lengthened, refer to the solution described at point 2. Ford RNSI (mm) (mm) F3M 075 C/H Quick fitting without making holes in the chassis using the original holes. Note: SC (mm) he instructions reported refer both to vehicles with original chassis and to vehicles with lengthened chassis, with rear-wheel drive. SC (mm) Mercedes SPRINER SPRINER 06 VolksWagen L/CRFER MB Sprinter BM 906 Wheel Base Bracket 3250 B F3M F3M 10 Quick fitting without making holes in the chassis using the original holes. F3M 075 2XX / 3XX 4XX / 5XX 3665 B 4325 B 3665 C 4325 D F3M E C E D 13

F3CL 075 CNILEVER IL-LIFS - 4 CYLINDERS load capacity: 750 kg WEIGH SRING 225 kg!

(centre of gravity at 600 mm) Standard Platform Dimensions Weight * Kg E B B1 Depth Width min.

min. F3CL075C 1200 225 235 430 985 448 523 190 750 Kg 1400* on demand F3CL075H 1600 230 295 495

16 F3CL 075 CNILEVER IL-LIFS - 4 CYLINDERS load capacity: 750 kg WEIGH SRING 225 kg! cantilever LIGH COMMERCILS PPLICIONS he cantilever lift F3CL 075 is suitable for vehicles up to 7.5 tonnes. ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis ECHNICL D rm Length (mm) W123. (mm) rm Width W58 (mm) F3CL075C W 123 B B F3CL075H E 14 Load capacity (centre of gravity at 600 mm) Standard Platform Dimensions Weight * Kg E B B1 Depth Width min. max. max. min. min. F3CL075C Kg 1400* on demand F3CL075H *Indicative weight of tail-lift supplied in kit without rear bumper and with a 1400 mm depth platform. he weight may vary according to width. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight.

17 VRIOUS SOLUIONS CCORDING O WHEEL BSE ND OVERHNG Opel MOVNO - Renault MSER F3CL 075 are available for all vehicles with double C chassis. W123 Standard (W58 not available) W58 W123 cantilever Citroën JUMPER 06 Fiat DUCO 06 Peugeot BOXER DUCO F3CL 075 W58 Quick fitting without making holes in the chassis using the original holes. 400 (mm) H C Note: he instructions reported refer to vehicles with original chassis that have not been lengthened Sc (mm) Ford RNSI 500 RNSI NB: the fitting is referred to chassis vehicles with front wheel drive only. 450 F3CL 075 W58 (W 123 on demand) Quick fitting without making holes in the chassis using the original holes. 400 H (mm) C Sc (mm) Mercedes SPRINER 06 VolksWagen CRFER 2006 SPRINER 2xx 3xx WB SPRINER 2xx 3xx WB F3CL 075 W58 (W 123 on demand) Quick fitting without making holes in the chassis using the original holes (mm) C H (mm) C H Sc (mm) Sc (mm) SPRINER 4xx 5xx WB SPRINER 4xx 5xx WB (mm) C H 400 (mm) C H Sc (mm) Sc (mm) 15

cantilever F3 CL CNILEVER IL-LIF load capacity: FUUR rm rm Length 1000 kg 1500 kg 2000 kg ECHNICL D Several arms type are available W 78 rm Width (centre to centre) W W W 82 118 123 W 152 F3 CL 10 C

18 cantilever F3 CL CNILEVER IL-LIF load capacity: FUUR rm rm Length 1000 kg 1500 kg 2000 kg ECHNICL D Several arms type are available W 78 rm Width (centre to centre) W W W W 152 F3 CL 10 C F3 CL 10 H F3 CL 10 HS F3 CL 15 C F3 CL 15 H F3 CL 15 HS F3 CL 15 HL F3 CL 20 C F3 CL 20 H F3 CL 20 HS F3 CL 20 HL PPLICIONS W B B he classical tail-lift F3CL is the ideal tail-lift for distribution and for vehicles for continuous use and several daily unloading operations. F3CL is suitable for trucks, semi-trailers and vehicle with low drawbar coupling. Cantilevers with PIEK Certificate F3 CLP special cantilevers 1000 to 3000kgs capacity for quiet deliveries and night time operations. It includes a silent power pack, sound-deadening platform coating and automated trolley stops. ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis E 16 Load capacity (centre of gravity at 600 mm) Weight * Kg E B B max min max min min F3 CL 10 C F3 CL 10 H 1000 Kg F3 CL 10 HS F3 CL 15 C F3 CL 15 H Kg F3 CL 15 HS F3 CL 15 HL F3 CL 20 C F3 CL 20 H Kg F3 CL 20 HS F3 CL 20 HL *pproximate weight for tail-lift equipped with aluminium platform dimensions 1600 x 2500 mm. Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight.

F3 CL FRIDGE Cantilever tail-lift with insulated platform (Patented) load capacity: 1500 kg 2000 kg FUUR PPLICIONS - nteo tail-lift, Fridge series, for insulated vans without rear doors: - Less

- n integrated structure consisting of aluminium and synthetic material gives to the tail-lift Fridge strength and lightness.

19 F3 CL FRIDGE Cantilever tail-lift with insulated platform (Patented) load capacity: 1500 kg 2000 kg FUUR PPLICIONS - nteo tail-lift, Fridge series, for insulated vans without rear doors: - Less weight, more useful capacity on the vehicle, faster unloading, and therefore more profit. - Weight of only 505 Kg for Kg capacity at 600 mm. - n integrated structure consisting of aluminium and synthetic material gives to the tail-lift Fridge strength and lightness. (Patented) - K less than 0,4 (W/m 2 K) ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis cantilever ECHNICL D Several arms type are available Model Platform dimensions W P G WxG = Insulated area F3 CL FRIDGE 15 C F3 CL FRIDGE 15 H F3 CL FRIDGE 15 HS F3 CL FRIDGE 15 HL F3 CL FRIDGE 20 C F3 CL FRIDGE 20 H F3 CL FRIDGE 20 HS F3 CL FRIDGE 20 HL 2600 Max 2600 Max G W P G Load capacity (centre of gravity at 600 mm) Weight * Kg E B B max min max min min F3 CL FRIDGE 15 C F3 CL FRIDGE 15 H Kg F3 CL FRIDGE 15 HS F3 CL FRIDGE 15 HL F3 CL FRIDGE 20 C F3 CL FRIDGE 20 H Kg F3 CL FRIDGE 20 HS F3 CL FRIDGE 20 HL *pproximate weight for tail-lift equipped with aluminium platform dimensions 1600 x 2500 mm. Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight. 17

cantilever 18 F3 CL30 CNILEVER IL-LIFS FOR HEVY DUY LODS load capacity: FUUR ECHNICL D B B 2500 kg at 1000 mm 3000 kg at 600 mm Load capacity (centre of gravity at 600 mm) E Std.

20 cantilever 18 F3 CL30 CNILEVER IL-LIFS FOR HEVY DUY LODS load capacity: FUUR ECHNICL D B B 2500 kg at 1000 mm 3000 kg at 600 mm Load capacity (centre of gravity at 600 mm) E Std. Platform Dimensions Weight* E B B Kg Depth Width max min. max. min min F3 CL 30 H Kg F3 CL 30 HS rm W rm Length rm Width (centre to centre) W 125 H HS ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis *Indicative weight of tail-lift supplied in kit without rear bumper and with a 1800 mm depth platform. he weight may vary according to width. ll dimensions are in mm unless otherwise specified. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight. PPLICIONS he classical tail lift F3 CL30 is the ideal tail lift for use in distribution where there is a need for continual use in loading and unloading heavy or specialist loads. F3 CL30 is suitable for trucks,semi-trailers and vehicle with low drawbar coupling. SNDRD EQUIPMEN PLFORM - Platform in aluminium alloy. - eflon wheels to prevent platform wear. MECHNICL FUNCIONS - Powered opening of the platform. - utomatic hydraulic tilting of platform to ground. - ilt of platform in all positions. - Mechanical stop of tail-lift arms against equipment (adjustable in 3 positions). - Support of pre-assembled control box on rear bumper. - ail-lift with approved rear bumper, factory-welded on the main beam of the tail-lift. HYDRULIC CHRCERISICS Power pack equipped with: - Closing seal, compact and soundproof. - Electrical connections by means of modular extractable board. - Electrical board for any type of connection. - 2 single-acting lifting cylinders with lubrication. - 2 double-acting tilting cylinders. - Cylinders protected by rubber gaitors. - Built-in safety solenoid valves on every cylinder. - ank with air filter. - Chrome-plated steel cylinder rods with high yield limit. - Flow adjusters compensated on all downward movements. CONROLS - External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - wo-hand use for operator s safety. - Motor with thermal safety device. - Motor relay with 350 silver pin (peak current) MOUNING - Bolted assembly plates. PRODUC FINISHING - ll steel parts of the hydraulic kit have been previously sandblasted, then treated with hexacrylic electrocataphoresis (except for cylinders, painted with bicomponent polyurethane enamel). - Material conform to EC standards. - Steel cataphoresis-treated pins. - nti-friction self-lubricating bushings. - Delivered fully assembled and tested, it is to be mounted to the chassis by bolting, eliminating need to repaint.

F3 CL30 SPECIL IL-LIFS FOR NIMLS load capacity: FUUR 2500 kg at 1000 mm 3000 kg at 600 mm Safety gates and anti-skid not supplied NEW 2009 ll hydraulic steel parts are treated with KL

F3 CL30 is suitable for trucks,semi-trailers and vehicle with low drawbar coupling. SNDRD EQUIPMEN PLFORM - Platform in aluminium alloy - eflon wheels to prevent platform wear.

21 F3 CL30 SPECIL IL-LIFS FOR NIMLS load capacity: FUUR 2500 kg at 1000 mm 3000 kg at 600 mm Safety gates and anti-skid not supplied NEW 2009 ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis PPLICIONS he tail lift F3 CL30 is the ideal tail lift for use in animals transportation. F3 CL30 is suitable for trucks,semi-trailers and vehicle with low drawbar coupling. SNDRD EQUIPMEN PLFORM - Platform in aluminium alloy - eflon wheels to prevent platform wear. cantilever ECHNICL D W B B max 520 min max E 1240 Load capacity (centre of gravity at 600 mm) Std. Platform Dimensions Weight* E B B Kg Depth Width max min. max. min min F3 CL 30 HS 3000 Kg *Indicative weight of tail-lift supplied in kit without rear bumper and with a 1800 mm depth platform. he weight may vary according to width. ll dimensions are in mm unless otherwise specified. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight. 19

cantilever REP CL 05 LR CNILEVER IL-LIF WIH MNUL OPENING load capacity: 500 kg REP CNILEVER PPLICIONS he REP CL 05 LR cantilever tail- with manual opening are the ideal tail- for logistic companies,

he folded platform allows a deep platform to be used without increasing the drag on the vehicle.

Standard platform dimensions Deep x Width Weight * ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis ***2000 mm (78 3/4) width available - weight 239 Kg (526 lbs).

22 cantilever REP CL 05 LR CNILEVER IL-LIF WIH MNUL OPENING load capacity: 500 kg REP CNILEVER PPLICIONS he REP CL 05 LR cantilever tail- with manual opening are the ideal tail- for logistic companies, vehicle rental companies and tool hire companies. REP CL 05 LR is very light and compact. herefore, it is suitable for smaller vehicles from 3.5 to 7 tons and pick-up. he folded platform allows a deep platform to be used without increasing the drag on the vehicle. vailable dimensions 1100 mm - (1300 mm) - (1500 mm) mm (700 mm) (800 mm) 500 mm (600 mm) (700 mm) 20 ECHNICL D REP CL 05 LR Load capacity (centre to centre at 600 mm 23 7/8) 500 Kg (1100 lbs) Standard platform dimensions Deep x Width Weight * ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis ***2000 mm (78 3/4) width available - weight 239 Kg (526 lbs). ***2300 mm (90 ) width max; decreased width available on request. Centre of gravity of the vehicle depending on the type of platform and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight. E D E B min. max. max. min x 2000 mm*** 225 Kg (43 x 78 3/4**) (496 lbs) 1300 x 2000 mm*** 240 Kg 350 mm 470 mm 1000 mm 907 mm (51 x 78 3/4**) (529 lbs) (13 3/4) (18 1/2) (39 3/8) (35 3/4) 1500 x 2000 mm*** 255 Kg (59 x 78 3/4**) (562 lbs) B 150 mm (5 7/8) GENERL INFORMION PLFORM - Platform in aluminium alloy MECHNICL FUNCIONS - ssisted opening of the platform. - utomatic adjustment of platform tilt between vehicle floor and ground. - Manually adjustable levelling of platform. - ail-lift with rear bumper already factory-welded on the main assembly of the tail-lift. - nti-friction self-lubricating bushings and chromeplated pins. HYDRULIC CHRCERISICS - Compact hydraulic group with security seal. - 1 single-acting lift cylinder with lubrication. - Built-in safety solenoid valves on the cylinder. - ank with air filter. - Chrome-plated steel cylinder rods with high yield. - Flow adjusters compensated on downward movements. CONROLS - Waterproof external control box fixed to the body. - Control with no electronic components, illuminated for night use. - Battery isolator with key. - wo-hand use for operator s safety. - Motor with thermal safety device. - Motor relay with 350 silver pin (peak current). RM - vailable with one type of arm. - REP CL 05 LR: distance between centres 678 mm (26 3/4). SSEMBLY Mounting plates to be welded to the beam by the installer. PRODUC FINISHING - Finish painted. - Material conform to EC standards. - Chrome-plated steel pins and self-lubricating bushings.

RCE 075 RERCBLE IL-LIF - 4 CYLINDERS load capacity: 750 kg LIGH COMMERCILS ECHNICL D PPLICIONS he retractable tail-lift F3RE is the ideal tail-lift for distribution vehicles due to its versatility,

SNDRD EQUIPMENS PLFORM - Platform in aluminum alloy MECHNICL FUNCIONS - ail-lift deployment by means of adjustable chromium plated guides of high yield steel.

23 RCE 075 RERCBLE IL-LIF - 4 CYLINDERS load capacity: 750 kg LIGH COMMERCILS ECHNICL D PPLICIONS he retractable tail-lift F3RE is the ideal tail-lift for distribution vehicles due to its versatility, large platforms and ease of use. he tail-lift is stowed away under the vehicle making it ideal for dock loading. RCE 075 is available for bodied chassis cab vehicles up to 7.5 tonnes GVW. SNDRD EQUIPMENS PLFORM - Platform in aluminum alloy MECHNICL FUNCIONS - ail-lift deployment by means of adjustable chromium plated guides of high yield steel. - ail-lift deployment and stowage under chassis by means of double extension cylinder. - utomatic hydraulic tilting of platform to ground. HYDRULIC CHRCERISICS Compact power pack equipped with: - closing seal, and soundproof. - 2 single-acting lifting cylinders with lubrication. - 2 single-acting tilt cylinders with lubrication. - Memory cylinder with automatic tilting at ground level. - 1 double ram for tail-lift deployment and stowage under chassis. - Built-in safety solenoid valves on every cylinder. - ank with air filter. - Chrome-plated steel cylinder rods with high yield. - Flow adjusters compensated on all downward movements. retractable Bushes to be welded CONROLS - External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - wo-hand use for operator s safety. - Motor with thermal safety device. - Motor relay with 350 silver pin (peak current) - Proximity switches for automatic positioning of tail-lift. Load capacity (center of gravity at 600 mm) Standard Platform Dimensions Weight* E B Kg Depth Width min. max. max. min. MOUNING - Bushes to be welded to the main beam. RCE 075 H 750 Kg 1200* 1500** *Indicative weight of tail-lift supplied in kit with a 1200 mm depth platform. he weight may vary according to width. **3 folds special platform. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight ** 273 PRODUC FINISHING - Material conform to EC standards. - Chromium-plated steel pins. - nti-friction self-lubricating bushings. - Delivered fully assembled and tested. 21

retractable F3 RE/CC RERCBLE IL-LIF - CHROMED GUIDES, DOUBLE EXENSION CYLINDER load capacity: FUUR RIGID VEHICLE 1 FOLD PLFORM B' B 1000 kg 1500 kg 2000 kg RIGID VEHICLE 2 FOLDS PLFORM B B' PPLICIONS

24 retractable F3 RE/CC RERCBLE IL-LIF - CHROMED GUIDES, DOUBLE EXENSION CYLINDER load capacity: FUUR RIGID VEHICLE 1 FOLD PLFORM B' B 1000 kg 1500 kg 2000 kg RIGID VEHICLE 2 FOLDS PLFORM B B' PPLICIONS he retractable tail-lift F3RE is the ideal tail-lift for distribution vehicles due to its versatility, large platforms and ease of use. he tail-lift is stowed away under the vehicle making it ideal for dock loading. he F3RE is available for trucks and semi-trailers. ll hydraulic steel parts are treated with KL hexacrylic electro-cataphoresis SEMI-RILER 1 FOLD PLFORM B B' E E E 22 1 FOLD PLFORM 2 FOLDS PLFORM Load capacity (center of gravity at 600 mm) E max Platform Depth* (example) F3 RE 10 C ( ) F3 RE 10 H 1000 kg ( ) F3 RE 10 HS ( ) F3 RE 15 C ( ) F3 RE 15 H ( ) 1500 kg F3 RE 15 HS ( ) F3 RE 15 HSS ( ) F3 RE 20 C ( ) F3 RE 20 H ( ) 2000 kg F3 RE 20 HS ( ) F3 RE 20 HSS ( ) F3 RE 10 H ( ) 1000 kg F3 RE 10 HS ( ) F3 RE 15 C ( ) F3 RE 15 H ( ) 1500 kg F3 RE 15 HS ( ) F3 RE 15 HSS ( ) F3 RE 20 C ( ) F3 RE 20 H ( ) 2000 kg F3 RE 20 HS ( ) F3 RE 20 HSS ( ) B min RIGID VEHICLE B min Weight Kg** B min SEMI-RILER B min Weight Kg** *For 1 fold platform: platforms depth available from 1333 mm to 1983 mm. **pproximate weight for tail-lift with platform width 2450 mm. Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. nteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from nteo for changes in technical specifications and/or in weight.

REP CL 06 LR. CANTILEVER TAIL-LIFT WITH MANUAL OPENING - 1 CYLINDER

REP CL 06 LR. CANTILEVER TAIL-LIFT WITH MANUAL OPENING - 1 CYLINDER CNILVR LIFS RP CL 06 LR. CNILVR IL-LIF WIH MNUL OPNING - 1 CYLINDR LOD CPCIY 600 KG PPLICIONS CHNICL SPCIFICIONS D he RP CL 06 LR cantilever tail-lifts with manual opening are the ideal tail-lifts for