F3 RE080 AM. RETRACTABLE TAIL-LIFT ALUMINUM SLIDING SYSTEM - 5 CYLINDERS

Transcription

1 RRACAL LIFS F3 R080 AM. RRACAL AILLIF ALUMINUM SLIDING SYSM 5 CYLINDRS LOAD CAPACIY 800 KG Fold platform R1 One fold platform APPLICAIONS F3R 080 AM with Aluium Slyders, so attractive pricing and ideal to equip rental vehicles, light duty commercial vehicles. he 5 cylinders F3R 080 AM is a very light strong and compact lift, with very high performances. Smooth hydraulic automatic tilt, high stiffness ideal to equip vehicles for customers that like high performances. he 5 cylinders a F3R 080 AM is available with a wide variety of versions, to suit most commercial vehicles and light trucks up to 7.5 GVW. F3R080 it s highly recommended for: Iveco DAILY Ford RANSI Mercedes SPRINR (double rear wheels) Mercedes VARIO Renault MASCO VolksWagen L/CRAFR Nissan ALON Nissan CASAR CHNICAL SPCIFICAIONS ilt cylinders: + 1 automatic tilt cylinder (1lift cylinder + 1tilt cylinder) Aluium sliding, hydraulic motor + pinion and rack single acting Aluium 2 folds mm 1 fold mm 2180 mm ( Max 2300) C H mm unit xterior control box with Fold platform R2 wo folds platform 998 mm 1000 mm 05 mm 5 mm 1050 mm 1425 mm Load capacity (center of gravity at 600 mm) A D D Le Le Weight* ** Kg F3 R080 C AM 800 kg F3 R080 H AM 800 kg *Approximate weight for taillift with platform dimensions 1205 mm x 2000 mm. Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight mm 32. anteo. product range 2013

2 F3 RCL 22 CC. DUAL PURPOS LIF CANILVR OR RRACAL 5 CYLINDRS LOAD CAPACIY 2200 KG RRACAL LIFS APPLICAIONS Anteo, always keeping in d the customers needs and anticipating the future. Anteo have manufactured a taillift which can be used both as a retractable taillift, remaining housed under the body when not required, and as a cantilever taillift allowing unloading to be quicker and easier than using standard retractable taillifts. his model of Anteo taillift has been developed with transport operators in d, particularly those on multidrop work. F3RCL 22 CC can remain stowed under the lorry when the vehicle loads on docks or in warehouses equipped with loading ramps and can be used as a cantilever taillift when it is used to unload the goods. he driver opens the retractable tail lift as normal at his first delivery, then uses the lift as a cantilever for the rest of his deliveries, and stows it away as a retractable after his final delivery or on returning to his depot.considering that it is an occasional cantilever taillift and can be regarded as a retractable taillift in every respect, F3RCL 22 CC has the great advantage of allowing the body manufacture and operator to utilise imum possible lengths allowed. CHNICAL SPCIFICAIONS Retraction IN / OU: Chromed guides and sliding brackets with scrapers and bronze bushings + double extension cylinders for a premium retraction always aligned with the lowest greasing. ilt cylinders: Platform opening: Locking system on Platform: depths: widths: + 1 automatic tilt cylinder Double acting Powered opening Aluium heel + Aluium tip Yes mm ( mm) mm H HS HSS 1230 mm Unit xterior control box with Not available in W 152 model ' Rigid vehicle 1 fold platform Load capacity (center of gravity at 600 mm) Platform Depth* (example) Weight Kg** F3R CL 22 H CC ( ) Kg. F3R CL 22 HS CC ( ) *For 1 fold platform: platforms depth available from 1333 mm to 1983 mm. **Approximate weight for taillift with platform width 2450 mm. Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. Platform lock system converts Retractable platform to cantilever anteo. product range

3 84.34 mm mm mm mm mm mm mm mm mm RRACAL LIFS F3 R 15/20 A. RRACAL AILLIF FOR DRAWAR COUPLING VHICLS CHROMD GUIDS 5 CYLINDRS LOAD CAPACIY 1500 KG 2000 KG () 1RIP ' () () CONROLAIO / SUFRAM / CONRACHASIS LAIO CHASSIS CHASIS mm APPLICAIONS he retractable taillift F3 R 15/20 A is the ideal taillift for vehicles with drawbar couplings. he taillift is stowed away under the vehicle making it ideal for dock loading. CHNICAL SPCIFICAIONS Lift frame: Custommade frame mounted between chassis & coupling + 1 automatic tilt cylinder Chromed Guides, Double xtension Cylinder Rigid vehicle 1 fold platform ilt cylinders: single acting Aluium 2 folds mm 1 fold mm mm (Max 2500) C H HS HSS 1230 mm 2RIP ' () () Unit xterior control box with CONROLAIO / SUFRAM / CONRACHASIS mm LAIO CHASSIS CHASIS () Rigid vehicle 2 folds platform 750 () 870 () 1 FOLDS PLAFORM Load Capacity (centre of gravity at 600 mm) F3R 15 HSA 1500 kg 1410 F3R 20 HSA 2000 kg 1410 Platform Depth * (example) Weight Kg** 1533 ( ) ( ) ( ) ( ) FOLDS PLAFORM Load Capacity (centre of gravity at 600 mm) Platform Depth * (example) F3R 15 HSA 1500 kg ( ) Weight Kg** F3R 20HSA 2000 kg ( ) *For 1 fold platform: platforms depth available from 1333 mm to 1983 mm. **Approximate weight for taillift with platform width 2450 mm. Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. Anteo are not responsible for the positioning and fixing of the drawbar coupling. 42. anteo. product range 2013

4 F3 R 15/20 LR LOAD CAPACIY. RRACAL LVLRID 2 CYLINDRS (4 CYLINDRS OPIONS) RRACAL LIFS 1500 KG 2000 KG SID FIING FOR RIGID VHICLS 900 [35.4 in] 1400 [55.1 in] A 650 [25.6 in] 1400 [55.1 in] D 750 [29.5 in] 900 [35.4 in] A 650 [25.6 in] 264 [10.4 in] D 750 [29.5 in] 264 [10.4 in] 2465 [97 in] 2465 [97 in] One piece steel platform QUICK FIING FOR SMIRAILRS 1300 [51 in] 1400 [55.1 in] A 425 [16.7 in] 1400 [55.1 in] D 975 [38.4 in] A 425 [16.7 in] 1300 [51 in] 489 [19.3 in] D 975 [38.4 in] 489 [19.3 in] 2465 [97 in] 2465 [97 in] AILLIF WIH ON PIC ALUMINIUM OR SL PLAFORM One piece aluium platform 1800 mm V AILLIF WIH SANDARD FOLDAL PLAFORMS: SL AS + ALUMINIUM FOLDING SCION H H FIXD LADING DG Z Z SL INIUM INIUM LAD ING DG All dimensions are in mm unless otherwise specified. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. SL ALUM ALUM FIXD 3 WAY HINGD RAMPS O FRON V O FR3 WAY HIN ON (3 GD R AM 00 mm le nght) V PS Foldable platforms: steel base + aluium folding section anteo. product range

5 RRACAL LIFS F3 R 15/20 LR. RRACAL LVLRID 2 CYLINDRS (4 CYLINDRS OPIONS) LOAD CAPACIY 1500 KG 2000 KG APPLICAIONS VRY SMOOH O US F3 R 15/20 LR is especially suited to Roll Cage operations, but more specifically to the typical ritish food industry operator. Anteo superb guide rail system eliates any Racking or ounce of the lift frame and platform during deployment and retraction. Available the platform at any level, a must where the operator loads or unloads on gradients (options). CHNICAL SPCIFICAIONS ilt cylinders: (option on demand) Aluium sliding, hydraulic motor + pinion and rack Single acting (option on demand) No (levelride platform) Aluium or steel 1 piece depths Steel Alu: Folded mm 2465 mm HS Unit xterior control box with 1 Fold platform 1 Piece platform 3 way hinged ramps to front fixed leading edge aluium platform with 3 way hinged ramps to front Load capacity (centre of gravity at 600 mm) V H Z Z V F3 R 15 LR 1500 Kg F3 R 20 LR 2000 Kg All dimensions are in mm unless otherwise specified. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. 40. anteo. product range 2013

6 F3 R30 CC. RRACAL AILLIF FOR HAVY DUY LOADS 5 CYLINDRS LOAD CAPACIY 2500 KG A 1000 MM 3000 KG A 600 MM RRACAL LIFS APPLICAIONS he 5 cylinders F3R 30 CC is the heavy duty retractable lift. he robust lift mechanism, the strong platform and hydraulic gear are designed for intensive, heavy duty applications and hostile environment operations. his lift is perfectly suited for the intensive distribution market, food distribution, drink and beverage distribution. F3 R 30 CC is the perfect retractable lift to use in combination of heavy electric transpallet. he taillift is stowed away under the vehicle making it ideal for dock loading operations, for demountable bodies, for occasional use, and all applications requiring quick and free access to the cargo space. Retraction system with chromed guides, smooth hydraulic automatic tilt, high stiffness ideal to equip vehicles for customers that like high performances with lower maintenance costs. CHNICAL SPCIFICAIONS ilt cylinders: + 1 automatic tilt cylinder Chromed Guides, Double xtension Cylinder Single acting Aluium 2 folds mm 1 fold mm ( 2300) mm (Max 2500) C H HS HSS mm Unit xterior control box with SID FIING FOR RIGID VHICL 1 FOLD PLAFORM ' QUICK FIING FOR SMIRAILR 1 FOLD PLAFORM ' Load capacity (centre of gravity at 600 mm) Std. Platform Dimensions Weight* Kg Depth Width F3 R 30 H CC 1630 ( ) Kg 2450 F3 R 30 HS CC 1730 ( ) *Approximate weight for taillift with platform dimensions 1630 mm x 2450 mm. Platforms depth from 1333 mm to 1983 mm. All dimensions are in mm unless otherwise specified. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. anteo. product range

7 RRACAL LIFS F3 R 15/20 CMC (COMPAC). RRACAL AILLIF CHROMD GUIDS 5 CYLINDRS LOAD CAPACIY 1500 KG 2000 KG ' 2 RIP Side fitting for rigid vehicle 2 folds platform APPLICAIONS he retractable taillift F3R 15/20 CMC COMPAC is the ideal taillift for distribution vehicles due to its versatility, large platforms and ease of use. he taillift is stowed away under the vehicle making it ideal for dock loading. F3R 15/20 CMC COMPAC is suggested and especially designed for rigid vehicles with very short overhang. CHNICAL SPCIFICAIONS ilt cylinders: + 1 automatic tilt cylinder Chromed Guides with hydraulic motor + rack and pinion drive Single acting Aluium 2 folds mm 1 fold mm ( 2300) ' mm (Max 2500) C H HS HSS 1230 mm Unit xterior control box with 1 RIP RIGID VHICL Side fitting for rigid vehicle 1 fold platform Load Capacity (centre of gravity at 600 mm) Platform Depth * (example) Weight ** (Kg) his lift slides in and out with hydraulic motor + rack and pinion drive No fixings beyond the rear of lift beam 1 FOLDS PLAFORM 2 FOLDS PLAFORM F3R15H ( ) kg 376 F3R15HS ( ) F3R20H ( ) kg 376 F3R20HS ( ) F3R15H ( ) kg 376 F3R15HS ( ) F3R20H ( ) kg 376 F3R20HS ( ) * 1 folds platform: platforms depth from 1333 mm to 1983 mm. **Approximate weight for taillift with platform width 2450 mm. Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. 38. anteo. product range 2013

8 F3 R 17/22 CC. RRACAL AILLIF CHROMD GUIDS, DOUL XNSION CYLINDR 5 CYLINDRS LOAD CAPACIY 1700 KG 2200 KG RRACAL LIFS he chromeplated guide can be adjusted longitudinally, horizontally and vertically olted double extension cylinder and olted assembly brakets to mainbeam he above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. Chromeplated guides and bushings, precise and durable, always aligned anteo. product range

9 RRACAL LIFS F3 R 17/22 CC. RRACAL AILLIF CHROMD GUIDS, DOUL XNSION CYLINDR 5 CYLINDRS LOAD CAPACIY 1700 KG 2200 KG ' Side fitting for rigid vehicle 1 fold platform ' APPLICAIONS he 5 cylinders F3R 17/22 CC are very strong lifts, with very high performances for intensive usage. F3R 17/22 CC with Chromed Guides, so premium quality, perfect alignment, low maintenance for demanding applications in the regular transport business, such as supermarket and food distribution. Smooth hydraulic automatic tilt, high stiffness ideal to equip vehicles for customers that like high performances. he 5 cylinders F3CL 17/22 are extremely versatile lifts suitable for commercial trucks above 7.5 GVW, rigids, trailers and semitrailers. CHNICAL SPCIFICAIONS ilt cylinders: + 1 automatic tilt cylinder Chromed Guides, Double xtension Cylinder Single acting Aluium 2 folds mm 1 fold mm ( 2300) mm (Max 2500) C H HS HSS mm Unit xterior control box with Side fitting for rigid vehicle 2 folds platform ' 1 FOLD PLAFORM 2 FOLDS PLAFORM F3 R 17 C CC Load capacity (center of gravity at 600 mm) Platform Depth* (example) SID FIING FOR RIGID VHICL Weight Kg** QUICK FIING FOR SMIRAILR ( ) F3 R 17 H CC 1700 kg ( ) F3 R 17 HS CC ( ) F3 R 22 C CC ( ) F3 R 22 H CC 2200 kg ( ) F3 R 22 HS CC ( ) F3 R 17 C CC ( ) F3 R 17 H CC 1700 kg ( ) F3 R 17 HS CC ( ) F3 R 22 C CC ( ) F3 R 22 H CC 2200 kg ( ) F3 R 22 HS CC ( ) Weight Kg** Quick fitting for semitrailer 1 fold platform *For 1 fold platform: platforms depth available from 1333 mm to 1983 mm. **Approximate weight for taillift with platform width 2450 mm. Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. 36. anteo. product range 2013

10 F3 R 10/17/22 AM. RRACAL AILLIF ALUMINIUM GUIDS 5 CYLINDRS LOAD CAPACIY 1000 KG 1700 KG 2200 KG RRACAL LIFS Hydraulic motor and brake (patented) Power pack Option: fully preassembled platform, controls and guides on request. Control box he above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. anteo. product range

11 RRACAL LIFS F3 R 10/17/22 AM. RRACAL AILLIF ALUMINIUM GUIDS 5 CYLINDRS LOAD CAPACIY 1000 KG 1700 KG 2200 KG Side fitting for rigid vehicle 1 fold platform APPLICAIONS F3R 10/17/22 AM with Aluium Slyders, so attractive pricing and ideal to equip rental vehicles. he 5 cylinders F3R 10/17/22 AM is a strong and compact lift, with very high performances. Smooth hydraulic automatic tilt, high stiffness ideal to equip vehicles for customers that like high performances. he 5 cylinders a F3R 10/17/22 AM is available with a wide variety of versions, to suit commercial trucks above 7.5 GVW, rigids, trailers and semitrailers. CHNICAL SPCIFICAIONS ilt cylinders: + 1 automatic tilt cylinder(1lift cylinder + 1tilt cylinder) Aluium sliding, hydraulic motor + pinion and rack Single acting Aluium 2 folds mm 1 fold mm ( 2300) mm (Max 2500) C H HS HSS mm Unit xterior control box with SID FIING FOR RIGID VHICL QUICK FIING FOR SMIRAILR Load capacity (center of gravity at 600 mm) Platform Depth* (example) Weight** Kg Weight* Kg Side fitting for rigid vehicle 2 folds platform 1 FOLD PLAFORM F3 R 10 C AM F3 R 17 C AM F3 R 22 C AM F3 R 10 H AM F3 R 17 H AM F3 R 22 H AM 1000 kg 1700 kg 2200 kg 1000 kg 1700 kg 2200 kg ( ) 1433 ( ) 1433 ( ) 1560 ( ) 1633 ( ) 1633 ( ) F3 R 10 HS AM F3 R 17 HS AM F3 R 22 HS AM 1000 kg 1700 kg 2200 kg ( ) 1633 ( ) 1633 ( ) FOLDS PLAFORM F3 R 17 C AM F3 R 22 C AM F3 R 10 H AM F3 R 17 H AM F3 R 22 H AM F3 R 10 HS AM F3 R 17 HS AM F3 R 22 HS AM 1700 kg 2200 kg 1000 kg 1700 kg 2200 kg 1000 kg 1700 kg 2200 kg ( ) ( ) 1283 ( ) 1283 ( ) 1600 ( ) 1583 ( ) 1583 ( ) Quick fitting for semitrailer 1 fold platform *Platforms depth from 1333 mm to 1983 mm. **Approximate weight for taillift with platform width 2450 mm. Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. 34. anteo. product range 2013

12 F3 R080 AM. RRACAL AILLIF LOAD CAPACIY 800 KG ALUMINUM SLIDING SYSM 5 CYLINDRS F3R080C R F3R080C R F3R080C R F3R080C R F3R080C R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R RRACAL LIFS F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3R080H R F3 R080 W58 AM F3 R080 W58 is the right choice for vehicles with pressed steel chassis. Ford RANSI 1000 mm 998 mm Mercedes SPRINR (single or double rear wheels) VolksWagen F3R080H R CRAFR G 405 mm 1050 mm M 765 mm 1425 mm F3 R080 W123 AM F3 R080 W123 is the best pick for vehicles with C chassis. 998 mm Iveco DAILY Iveco UROCARGO Renault MASCO Mercedes VARIO Nissan ALON Nissan CASAR 1000 mm G 405 mm 1050 mm M 765 mm 1425 mm *Approximate weight for taillift with platform dimensions 1205 mm x 2000 mm. Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). he above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight. anteo. product range