STANDART PROJE STANDARD PROJECT BEDIZ ERGIN. Isim/Name. Imza/Sign. Ölçek/Scale Rev.No. Is No./Ünite No. MIS Makina, Insaat, Sanayi Ltd. Sti.
|
|
- Andra Reeves
- 6 years ago
- Views:
Transcription
1 ZINCIRLI IZGARA GRAB BAR SCREEN ÖN GÖRÜNÜS FRONT VIEW H3 H1 H ÖN GÖRÜNÜS FRONT VIEW H5=H2+H4 H4 H2=H PROJE NOTLARI: PROJECT NOTES MIS Makina, Insaat, Sanayi Ltd. Sti. Tel: Fax: Address:Ziya Gokalp Str. 36/22 Kizilay - ANKARA - TURKEY E.Mail: info@misindustry.com Isim/Name Imza/Sign BEDIZ ERGIN CEMAL ÇIM STANDARD PROJECT MEKANIK TEMIZLEMELI ZINCIRLI IZGARA GRAB BAR SCREEN Ölçek/Scale Rev.No. Is No./Ünite No. Job No./Unit No. Res.No./Drawing No.
2 HALATLI IZGARA ROPE TYPE SCREEN YAN GÖRÜNÜS SIDE VIEW TAHRIK ÜNITESI DRIVE UNIT SIYIRICI SCRAPER UNIT KÜREK RAKE ARM MIS Makina, Insaat, Sanayi Ltd. Sti. Tel: Fax: Address:Ziya Gokalp Str. 36/22 Kizilay - ANKARA - TURKEY E.Mail: info@misindustry.com Isim/Name Imza/Sign BEDIZ ERGIN NILÜFER DEMIRCI AKIS YÖNÜ FLOW DIRECTION 75 STANDARD PROJECT HALATLI IZGARA ROPE TYPE SCREEN Ölçek/Scale Rev.No.
3 MERDIVEN TIPI INCE IZGARA STAIR TYPE SCREEN GÖVDE PALET PALETTE SU SEVIYESI WATER LEVEL HELIS KONVEYÖR SCREW CONVEYOR A C A - B KESITI A - B SECTION C ZINCIR DISLI ZINCIR SPROCKET CHAIN TAHRIK DRIVE UNIT FIRÇA BRUSH D - D KESITI D - D SECTION FIRÇA BRUSH C - C KESITI C - C SECTION MIS Makina, Insaat, Sanayi Ltd. Sti. Isim/Name Imza/Sign BEDIZ ERGIN STANDARD PROJECT MERDIVEN TIPI INCE IZGARA STAIR TYPE SCREEN
4 BELT FILTRE PRES BELT FILTER PRESS ÖN GÖRÜNÜS FRONT VIEW TAHR IK DRIVE UNIT GERD IRME TIGHTENER UNIT YATAK BEARING TAMBUR ROLLER SIYIRICI SCRAPER BANT BAND HIDROLIK ÜNITE HYDRAULIC UNIT OLUK CHANNEL GÖVDE SASE CHASSIS YASLANDIRMA TANKI AGEING TANK AKMA OLUGU FLOW CHANNEL DN 80 GIRIS DN 80 ENTRANCE YATAK BEARING ÜST GÖRÜNÜS UPPER VIEW TAHR IK DRIVE UNIT TAMBUR KESITI ROLLER SECTION MiS MIS Makina, Insaat, Sanayi Ltd. Sti. Tel: Fax: Address:Ziya Gokalp Str. 36/22 Kizilay - ANKARA - TURKEY E.Mail: info@misindustry.com STANDARD PROJECT BELT FILTRE PRES BELT FILTER PRESS
5 ÇAMUR YOGUNLASTIRICI SLUDGE THICKENING TANK MOTOR + REDÜKTÖR DRIVE UNIT GÖVDE CHASSIS SKRAYPER SCRAPER Ø200 Ç.B VANA Ø200 VALVE SIZDIRMAZLIK FLANSI FLANGE DETAY - "A" DETAIL - "A" A-A KESITI A-A SECTION Isim/Name BEDIZ ERGIN Imza/Sign STANDARD PROJECT PLAN PLAN ÇAMUR YOGUNLASTIRICI
6 KUM TUTUCU SAND CLASSIFIER C-C KESIDI-C-C SECTION TEKNIK ÖZELLIKLER TECHNICAL SPECS GIRIS KAPASITESI INLET CAPACITY 70 m3/h MAX. KATI MADDE MIKTARI :% 1.5 MAX. DRY SOLID AMOUNT VIDA KAPASITESI : 1.2 m3/h SCREW CAPACITY VIDA HIZI : 5.9 d/d SCREW SPEED HAZNE HACMI : 2 m3 RESERVOIR VOLUME HELIS BOYU : 4400 mm SCREW LENGTH SPIRAL ÇAPI : 285 mm SPIRAL DIAMETER SPIRAL ET KALINLIGI : 15 mm SPIRAL THICKNESS SPIRAL VIDA MALZEMESI : ÖZEL YÜKSEK ÇEKME MUKAVEMETLI ALASIMLI ÇELIK SPIRAL SCREW MATERIAL : SPECIAL STEEL ÜST GÖRÜNÜS TOP VIEW SU TEMAS YÜZEYI : AISI 304 WATER SURFACE MATERIAL SPIRAL TIPI : SAFTSIZ SPIRAL TYPE : SHAFTLESS MiS STANDARD PROJECT MIS Makina, Insaat, Sanayi Ltd. Sti. Tel: Fax: Address:Ziya Gokalp Str. 36/22 Kizilay - ANKARA - TURKEY E.Mail: info@misindustry.com KUM TUTUCU SAND CLASSIFIER 0.00 YAN GÖRÜNÜS-SIDE VIEW C C
7
8 ARSIMET POMPASI ARCHIMEDIAN PUMP
9 SÜRGÜLÜ KAPAK PENSTOCK ÖN GÖRÜNÜS FRONT VIEW YAN GÖRÜNÜS SIDE VIEW TEKNIK ÖZELLIKLER KASA : Paslanmaz Çelik AISI 316 L 1 KASA PLATE 6 MIL SHAFT KAPAK : Paslanmaz Çelik AISI 316 L MIL : Paslanmaz Çelik AISI 329 SIZDIRMAZLIK YÜZEYI : Sert Lastik ( " P " TIPI ) AKTÜATÖR AYAGI : St 37, ÜZERI EPOKSI KAPLI TECHNICAL SPECS 3 KAPAK COVER 5 KIRIS BEAM MAX. SU KOTU MAX. WATER LEVEL PLATE : AISI 316 L COVER : AISI 316 L SHAFT: AISI 329 SEAT SURFACE : "P" TYPE RUBBER ACTUATOR SUPPORT : St 37, EPOXY COATED PENSTOK DIP KOTU PENSTOCK BOTTOM CODE KANAL DIP KOTU CHANNEL BOTTOM CODE 2 KASA COVER ÜST GÖRÜNÜS UPPER VIEW SU AKIS YÖNÜ WATER FLOW DIRECTION 1 3 KAPAK COVER KASA PLATE 4 KIRIS BEAM SIZDIRMAZLIK ELEMANI SEAT MATERIAL MiS MIS Makina, Insaat, Sanayi Ltd. Sti. Tel: Fax: Address:Ziya Gokalp Str. 36/22 Kizilay - ANKARA - TURKEY E.Mail: info@misindustry.com STANDARD PROJECT SÜRGÜLÜ KAPAK PENSTOCK
10 BAND KONVEYOR BELT CONVEYOR L= L+D MIS Makina, Insaat, Sanayi Ltd. Sti. Tel: Fax: Address:Ziya Gokalp Str. 36/22 Kizilay - ANKARA - TURKEY E.Mail: info@misindustry.com BAND KONVEYÖR BELT CONVEYOR MiS STANDARD PROJECT B-B KESITI B B+30 B+100
11 TELESKOBİK VALFLER TELESCOBICAL VALVES A B C D E 3 L F NØ DNØ STROK H MØ No Açõklama Malzeme 1 Flanş / Flange St 37 2 Boru / Pipe API SPEC 5L 3 Merkezleyici Mil Yuvasõ / Centring Shaft Hole St 37 4 Takviye Bayrağõ / Support St 37 5 Merkezleme Mili Pleyti / Centring Shaft Plate St 37 6 Ring Conta / Ring Washer Bronze 7 Çanak Conta / Bowl Washer Epidiem 8 Kayar Boru / Sliding pipe AISI 304 Satinless Steel 9 Kayma Mili / Sliding Shaft Bronz 10 Mil Kayma Yatağõ / Shaft Sliding Bearing AISI 304 Satinless Steel 11 Takviye Bayrağõ / Support AISI 304 Satinless Steel 12 Çan Ağzõ / Bowl Mouth AISI 304 Satinless Steel 13 Takviye Bayrağõ / Support AISI 304 Satinless Steel 14 Kaldõrma-İndirme Mekanizmasõ yatağõ / Lifting mechanism bearing AISI 304 Satinless Steel 15 Ayak destek saçõ / Support extension St Ayak Beton destek saçõ / Support extension concrete St Ayak Saçõ / Support extension St Saport Flanşõ / Support flange St Saport Borusu / Support pipe St Uzatma Borusu ve mili / Extension pipe and shaft St Kõlõf Boru / Covering Pipe St 37 or PVC 22 Rediktör / Reductor Variable 23 Aktüatör / Actuator Variable
12 DIP KLAPESI FOOT VALVE DIMENSION TABLE - PN10 No SIZE f D f C H H1 H2 f A Approx DN mm mm mm mm mm mm Weight-kg , , , , , , , , , , , , , , ,0 749 MATERIAL LIST No Description Material Standard These illustrations / drawings are for referral only. 1 Body Cast Iron BS 1452 Final details of dimensions and assembly will be 2 Bearing Polyamit calculated based on real project. 3 Shaft Cast Iron BS Screw&Nut Galvanized Steel M5 5 Disc Cast Iron BS Ring Rubber EPDM 7 Cover Cast Iron BS Screw&Nut Galvanized Steel M5 9 Strainer Galvanized Steel St37
13 DISMANTLING JOINT SÖKME TAKMA PARÇASI L1 d x n L STICK SAPLAMA F D Dc L3 a 25 Ds L2 OD B PN10 PN16 DN OD Ds D Dc L L1 L2 L3 a d n kg D Dc L L1 L2 L3 a d n kg 80 88, ,3 113, , , , , ,6 353, , ! Please note, PN25,PN40,PN64,PN100 increased proportionally with PN 25,PN40,PN64,PN100 Flanges.
14 ISO Dimensions of Flanges ÖN GÖRÜNÜŞ FRONT VIEW YAN GÖRÜNÜŞ SIDE VIEW DETAIL-A CİVATA DELİKLERİ RAİSED FACE FLANGE PN 6 Flange Nominal Outside Dia.of Pipe Dimensions Bolt Mass Dia- DN mm inches B G C D a b c Size d No kg 10 17,1 0, M , ,3 0, M , ,7 1,050 27, M , ,4 1,315 34, M , ,2 1,660 43, M , ,3 1,900 49, M , ,3 2,375 61, M , ,0 2,875 77, M , ,9 3,500 90, M , ,3 4, M , ,3 5, , M , ,3 6, , M , ,1 8, , M , ,1 10, , M , ,9 12, , M , , , M , , M , M , , M , M , , M , , M , , M , , M , , M27 29, , , M27 29, , , M27 29, , , M27 29, , , M30 32, , , M30 32, , , M33 35, , , M33 35, , , M33 35, , , M , , M , , M ,860 Note: Bolt holes shall be adjusted symmetrically to the vertical centerline through the flange fac To connect to Tee material, centerline is defined with the face of the branch flange held parallel to the vertical plane.
THOMAS. Large Diameter Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Large Diameter Couplings Dedicated Connections For Rigid Large Diameter Pipework F1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED
More informationPRE-DEWATERING BELTS
Pre-dewatering belts are the equipment which reduce sludge volume in several types of treatment plants. They can be used either before the belt press units, or as a separate sludge thickener. Especially
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationÖnemli Uyarı: Important Notice:
Önemli Uyarı: - u katalogda bulunan görsel resim, tasarım ve teknik çizimlerin her türlü hakkı Gemma Otomotiv Ltd. Şti ye aittir. İzinsin Kullanılamaz ve Kopyalanamaz. - Gemma Otomotiv ölçü ve teknik resimler
More informationProduct catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
More informationType / Material code Body* Disc Stem Lining**
Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationseries BUTTERFLY VALVE DOUBLE ECCENTRIC FLANGED FAF 3800 PRODUCTION STANDARDS DN100 DN2000 PN Design EN 593 EN ISO Flanged
PRODUCTION STANDARDS DN100 DN2000 PN 10-16-25 Design EN 593 Connection End Connection EN 1092-2 ISO 7005-2 - Flanged EN 558 Series 14 DIN 3202 F4 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationstart by imagining
www.efarge.com info@efarge.com PLAKA TRİMİNG EBATLAMA HATTI SLAB TRIMMING & DIMENSIONING LINE PTEH01 PLAKA TRİMİNG EBATLAMA HATTI (TEH01) SLAB TRIMMING & DIMENSIONING LINE PLAKA TRİMİNG MAKİNASI (TRIMMING
More informationNon Return Valves.
Non Return Valves Table of contents Product information Type 4010 & 4010HD Type 4010, with lever and weight Type 4010 HD, with lever and weight + hydraulic damper Type 4020, slanted seat with/without damper
More informationMAP Automatic Strainers In-Line Series
MAP Automatic Strainers In-Line Series flow rate filtration degrees inlet / outlet diameters min. operating pressure up to 4.500 m 3 /h (19.800 gpm) 5.000 200 micron up to DN800 (32 ) 1 bar (15 psi) Heavy
More informationPUMP, VALVE AND DAM EQUIPMENT PRODUCT CATALOGUE
PUMP, VALVE AND DAM EQUIPMENT PRODUCT CATALOGUE TSE www.semsan.com.tr Since 1984, SEMSAN PUMP is main mechanical equipment and specific process pumps manufacturer for most important projects of Turkey.
More informationJUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems
JUST PIPING, JUST FITTING A Comprehensive Integrated Solution For Piping Systems SF 01 DUCTILE IRON PIPE FITTINGS FD1011 FD1021 FD1022 FD1031 FD1102 FD1103 FD1111 FD1121 Double Flanged Piece Flanged spigot
More informationDOUBLE OFFSET FLANGED BUTTERFLY VALVES GRIP THAT HOLDS
GRIP THAT HOLDS SERIES 2E-3 // PN 10/16/25/40 // DN 150-3000 (6 118 ) // Hydraulic equipment // Industrial piping // Sanitary installations DOUBLE OFFSET FLANGED BUTTERFLY VALVES GENERAL INFORMATION GENERAL
More informationKeystone Double flanged butterfly valve Figure 55
Double flanged valve design for services in the water treatment industry Features General application Waterwork industries where a double flanged valve is required. Fire fighting systems. Sea water applications.
More informationDuctile Iron. Fittings and Accessories for pressure pipelines. 1 st issue
Ductile Iron Fittings and Accessories for pressure pipelines 1 st issue INTRODUCTION Tawakol Metal Industries is Egypt's main manufacturer of Grey and Ductile Cast Iron products since 1975. TMI's reputation
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More informationMaterials : Cast iron or stainless steel body
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges PN10/16 or PN25-10 C + 90 C for NBR, 110 C for EPDM,180 C for FKM Max Pressure : 10 to 16 Bars ( according
More informationNero Needle Valves. Nero Needle Valves
Nero Needle Valves Main Characteristic The needle valve is mainly designed for water flow rate and pressure regulation in a pipeline. The regulation takes place thank the axial movement of the piston,
More informationÖnemli Uyarı: Important Notice:
Önemli Uyarı: - Bu katalogda bulunan görsel resim, tasarım ve teknik çizimlerin her türlü hakkı Gemma Otomotiv Ltd. Şti ye aittir. İzinsin Kullanılamaz ve Kopyalanamaz. - Gemma Otomotiv ölçü ve teknik
More informationAVK UK GROSS PRICE LIST 2017
AVK UK GROSS PRICE LIST 2017 AVK UK GROSS PRICE LIST 2017 AVK UK PRICE LIST 2017 AVK UK is part of the globally renowned AVK Group, one of the leading manufacturers of valves for the water, gas and waste
More informationV4(V7)-ABFW-EPN16 Actuated Wafer type butterfly valves
V4(V7)-ABFW-EPN16 Actuated Wafer type butterfly valves FEATURES PRODUCT DATA Cast Iron (V4) or SUS304 (V7) Wafer Body Centric butterfly valve with elastomer liner Wide DN-range (DN 50 DN600) For On/Off
More informationMotorized Butterfly Valve Actuated Wafer type butterfly valves
Motorized Butterfly Valve Actuated Wafer type butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN600) For On-Off or Modulating Control Manual override non-clutch design. Manual operation can
More informationValves. BS Standard JINAN MEIDE CASTING CO., LTD.
Valves BS Standard JINAN MEIDE CASTING CO., LTD. Resilient Wedge Gate Valve XZ81X Grooved Resilient OS&Y Gate Valve Page 11 XZ51X Flanged x Grooved Resilient OS&Y Gate Valve Page 12 Z85X Grooved Resilient
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More informationBUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg
B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C
More informationCV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
More informationKV-3 BUTTERFLY VALVE/WAFER TYPE GENERAL FEATURES
KV-3 BUTTERFLY VALVE/WAFER TYPE GENERAL FEATURES The closing element in the butterfly valves is a rotating shaft that is placed on a vertical axis. The sealing is provided between the metal flap and the
More informationTILTING TYPE CHECK VALVES
lead water to the next level TILTING TYPE CHECK VALVES INDEX 1.GENERAL INFORMATION 1.1 Tips for Long Term operation 1.2 Instruction for Shipment &Werehousing 2. ASSEMBLY GUIDE &START UP INSTRUCTIONS 2.1
More informationDual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
More informationDatasheet for MATRE BLADDER TANK FOAM PROPORTIONERS
Datasheet for MATRE S Index 1 General product information...3 2 Flow range and interface guide...3 3 Dimensions and interfaces...3 4 Standard balanced proportioners...4 4.1 General models... 4 5 Pressure
More informationIndustrial Valves and Flanges
Industrial Valves and Flanges PN16 ANSI150 (B16.1) Industrial Valves highest demands. Butterfly Valves are made of ductile iron and a selection of high-grade materials for Lug Type Butterfly Valves VE200
More informationBerkeley 8T-550 Submersible Turbine
Berkeley 8T-55 9 3 Nominal RPM: 345 Maximum Working Pressure: 485 PSI 1 8 27 3 HP 9 7 24 25 HP 8 6 21 2 HP 7 5 4 3 18 15 12 9 15 HP 1 HP 6 5 4 3 Efficiency % 2 6 2 1 3 1 1 2 3 4 5 6 7 8.19" (with 6" mtr.)
More informationSpecial Kv available. Classification according pressure equipment Directive, 2014/68/UE
SELF-OPERATED PRESSURE REGULATORS PRESSURE REDUCING VALVE MODEL PRV45 PRODUCT FEATURES Self-actuating pressure reducing valve balancing by diaphragm used to provide a constant downstream still there being
More informationMotorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN600 for PN16 type, DN50 DN350 for PN25 type) For On-Off or Modulating Control Manual override non-clutch
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More information2-port seat valves PN16 with flanged connection
4 330 Acvatix 2-port seat valves PN16 with flanged connection VVF40.. Grey cast iron EN-GJL-250 valve body DN 15...150 k vs 1.9...315 m 3 /h Can be equipped with SAX..-electromotoric or SKD..-, SKB..-
More informationGreater Cairo Foundries. Concentric Rubber Lined Butterfly Valves
Greater Cairo Foundries مسابك القاهرة الكبرى Concentric Rubber Lined Butterfly Valves GCF Double Flanged Butterfly Valve Series 7100 for Water Works Application GCF butterfly Valve Series 7100 is a ductile
More informationWorcester 18/19 Series. Modular Multi-Way Ball Valves
Worcester 18/19 Series Modular Multi-Way Ball Valves The Modular Approach To Flexibility 2 Flowserve Worcester's modular Series 18/19 multi-way valve addresses the need for diverting media through a number
More informationRef ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref:
Model/Ref: 363-366 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. ISO PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications
More informationEUF/EUFS series. Fire Pump PSB Listed according to CP52(Singapore)
ANNEX 1: SPECIMEN OF LOGO and MARK A) SETSCO (Registered) Logo where innovation f l ow s B) SETSCO Mark for Ready-Mixed Concrete Cert No: RMC-YYYY-XXX-A C) SETSCO Mark for Fire Safety Products Fire Pump
More informationBKV 4000 Bottom Blowdown Control Valve Installation and Operating Instructions
BKV 4000 Bottom Blowdown Control Valve Installation and Operating Instructions BKV 4000 MKK v10.01-en 1 CONTENTS 1. SAFETY INFORMATIONS... 3 2. DESCRIPTION... 3 3. TECHNICAL SPECIFICATIONS... 4 3.1. BKV
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationOperating manual Keula gate valves DN PN10/16
Operating manual Keula gate valves DN40-400 PN10/16 Page - 1 Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str. 15 02957 Krauschwitz GERMANY Manufacture and sale of the slide valves: Slide valves according
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationData sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
More informationVALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationHS10S-FA. Water station. Product specification sheet
HS10S-FA Water station Product specification sheet Range of Application Medium Drinking water Inlet pressure Max. 16 bar Outlet pressure 1.5-6.5 bar Installation position Horizontal with filter bowl downwards
More informationSTRAIGHT PERFORATED TRAY
STRAIGHT PERFORATED TRAY RETURNED EDGE TYPE RETURNED FLANGE TYPE NOTE: Other sizes are available upon request WIDTH (W) HEIGHT (H) 50 15 15 150 15 15 15 400 15 500 15 600 15 STRAIGHT CABLE TRAY STANDARD
More informationData sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
More informationHygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
More informationBUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationHS10S-FA. Water station. Product specification sheet
HS10S-FA Water station Product specification sheet Range of Application Medium Drinking water Inlet pressure Max. 16 bar Outlet pressure 1.5-6.5 bar Installation position Horizontal with filter bowl downwards
More informationMaterials : ASTM A351 CF8M body
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
More informationMotorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN500) for PN16 type For On-Off Control Manual override non-clutch design. Manual operation can be operated
More informationEstablished in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling.
Modentic Industrial Corp. ISO 9001 Certified. Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Contents A view of valve process
More informationTwo-port seat valves with male thread, PN16
4 363 Two-port seat valves with male thread, PN6 VVG4... Two-port seat valves with male thread, PN6 Bronze Rg5 DN5... DN50 mm (½"... 2") k vs 0.63... 40 m 3 /h Stroke 20 mm Can be equipped with actuators
More informationSize : Ends : Min Temperature : Max Temperature : MADE OF STAINLESS... MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationLEVEL CONTROL 3
LEVEL CONTROL info@ayvaz.com www.ayvaz.com 3 LEVEL CONTROLLERS LEVEL CONTROLLERS FOR STEAM BOILERS FANTINI COSMI LEVEL REGULATORS Body Ductile Iron GGG 40.3 Stainless Steel AISI 316 Teflon Coated (Optional)
More informationSpare Parts MH Koltek Valve SP70735-GB
Spare Parts MH Koltek Valve SP70735-GB5 2000-05 Koltek Valve type MH, MHI and MHE Bearing and lid for bearing 2 Double shutter Reg.: 2000-05 Intro.: 9605 Koltek Valve type MH, MHI and MHE Type MH 25 mm
More information3-port seat valves PN16 with flanged connection
4 430 Acvatix 3-port seat valves PN16 with flanged connection VXF40.. Grey cast iron EN-GJL-250 valve body DN 15 150 k vs 1.9 315 m 3 /h Can be equipped with SQX.. electromotoric or SKD..-, SK..- and SKC..-
More informationMaterials : Ductile iron body EN GJS 500-7
Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 130 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
More informationKnife gate valve HG - Standard
Knife gate valve HG - Standard V R Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve HG Stafsjö s knife gate valve HG has excellent flow
More informationButterfly valves PN6, PN10, PN16
4 136 Butterfly valves PN6, PN10, PN16 VKF46... Butterfly valves for fitting between counter-flanges Nominal pressures PN6, PN10, PN16 For fitting between PN6, PN10 or PN16 counter-flanges to ISO 7005
More informationDN 50 to 300 Flanges GN10/16-10 C C Max Pressure : 16 Bars Specifications : Cast iron disc All positions Low head loss
Size : Ends : Min Temperature : Max Temperature : DN 50 to 300 Flanges GN10/16-10 C + 130 C Max Pressure : 16 Bars Specifications : Cast iron disc All positions Low head loss Materials : Cast iron Page
More informationMaterials : Ductile iron EN GJS body, EPDM seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck
More informationPRODUCT GUIDE AS/NZS ISO 9001:2000 A DIVISION OF ALLIANCE CASTING & ENGINEERING SOLUTIONS PTY LTD
PRODUCT GUIDE AS/NZS ISO 9001:2000 A DIVISION OF ALLIANCE CASTING & ENGINEERING SOLUTIONS PTY LTD www.briggsmarine.com.au Briggs Marine Products are manufactured in Australia from specified copper base
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationSoft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 50-300 2 components DN 350-500 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data 5 technical data 5 KA series 6 components DN 40-300 6
More informationEXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
More informationAVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
More informationStainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
More information2-Port Seat Valves with Flange, PN 25
OEM 2-Port Seat Valves with Flange, PN 25 VVF52...E Spheroidal cast iron EN-GJS-400-8-LT valve body DN 5...40 k vs 0.63 25 m 3 /h Can be equipped with SQX E- motoric or SKD E- or SKB - electrohydraulic
More informationFIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
More informationabcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG
abcdef SNG 09 where innovation flows EN7/DIN 22 End Suction Centrifugal Pumps www.euroflopumps.com Coding System Eg. EU 2 / 1 MBC DB EUM / 2 MBC A2-01 Series EU = Bareshaft pumps EUM = Monobloc pumps X
More informationHELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
More information3-port seat valves, external thread, PN16
4 464 3-port seat valves, external thread, PN6 VXG44.. ronze CC49K (Rg5) valve body DN 5..DN 40 k vs 0.25..25 m 3 /h Flat sealing connections with external thread G to ISO 228- Sets of ALG..3 screwed fittings
More informationV A L V E S. rice List of. Controlling fluids is our expertise TERMS & CONDITIONS : An ISO:9001 Co. PRICE LIST NO. : JMW / 3 0 W.E.
V A L V E S Controlling fluids is our expertise TERMS & CONDITIONS : This cancels our all previous issues. All prices are Ex. works, Jalandhar. Excise duty will be charged extra as applicable (presently
More information(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More information3-port seat valves PN10 with flanged connection
4 420 cvatix 3-port seat valves PN10 with flanged connection VXF31.. Grey cast iron EN-GJL-250 valve body DN 15 150 k vs 2.5 315 m 3 /h Can be equipped with SX..-electromotoric or SKD..-, SK..- and SKC..-
More informationSMA. Automatic Minimum Flow System PN 250-PN 400 ANSI look at info overview. 180 bar < < 400 bar
Automatic Minimum Flow System look at info overview PN 250-PN 400 ANSI 1500-2500 180 bar < < 400 bar 7 V R The Automatic Minimum Flow System SMA 63/64 is a protection device for pump protection. It automatically
More informationDescription. Functions. Technical data. Applications. Tests. Level control float valve, enabling the control of the filling level.
Level control float valve, enabling the control of the filling level. Description For general information concerning the operation of a Hydrobloc control valve, please consult our general manual (series
More informationT he -A900 series of automatic control
A00 Automatic Control Valve T he -A00 series of automatic control valves are Basic Valves to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Top and seat
More informationNorflow Controls Industrial Valves
MATERIAL OF CONSTRUCTION FOR PRESSURE CONTAINING PARTS FOR TRIM MATERIAL Carbon Steel Forged A-105 13% Cr. Steel A-217 Gr. CA15 Carbon Steel Cast A-216 Gr. WCB, WCC AISI 10 0.15% Moly Steel Cast A-217
More information3-Port Seat Valves with Male Thread, PN 16
6 3-Port Seat Valves with Male Thread, PN 6 VXG ronze CC9K (Rg5) valve body DN 5DN 0 k vs 02525 m 3 /h Flat sealing connections with external thread G to ISO 228/ Sets of ALG 3 screwed fittings with threaded
More information***************************************************************************************************************
15515 VALVES, HANGERS, AND SPECIALTIES *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number:23 21 16 ***************************************************************************************************************
More informationAVK DOUBLE ECCENTRIC BUTTERFLY VALVE, PN 10/16, INTEGRAL SEAT, IP 67 GEARBOX WITH HANDWHEEL
AVK OUBE EENTRI BUTTERFY VAVE, PN 10/16, INTEGRA SEAT, IP 67 GEARBOX WITH HANWHEE 00 019 ouble eccentric butterfly valve, for water to max. 70, designed according to EN 593, Face to face according to EN
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN10/16, ANSI150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
More informationMaterials : Ductile iron EN GJS body, EPDM seat
Reinforced lug from DN200 to DN1400 : Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications
More informationAVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)
AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO
More informationFIRE PROTECTION PRODUCTS
FIRE PROTECTION PRODUCTS Rev.0119 6 info@ayvaz.com www.ayvaz.com 1 FIRE PROTECTION PRODUCTS ANGULAR EXPANSION JOINTS GIMBAL TYPE SEISMIC EXPANSION JOINTS Bellow Material Stainless Steel AISI 321 (Opt.
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges PN10/16-15 C + 110 C ( 130 C C temporarily) Max Pressure : 16 Bars up to DN300, 10 bars over Specifications
More information3-port seat valves PN16 with flanged connection
4 440 Acvatix 3-port seat valves PN16 with flanged connection VXF41.. Grey cast iron EN-GJL-250 valve body DN 15...150 k vs 1,9...300 m 3 /h Can be equipped with SAX..-electromotoric or SKD..-, SK..- and
More informationDATA BOOKLET LSD SERIES. Suction Diffusers. Pumps Motors ISO 9001 Company. Catalogue Pumping Solution
SERIES DATA BOOKLET Suction Diffusers Pumps Motors ISO 9001 Company Catalogue 2011 Pumping Solution CONTENTS INTRODUCTION Page 3 FEATURES AND BENEFITS Page 3 DESIGN FEATURES Page 4 MATERIAL OF CONSTRUCTION
More informationDOUBLE ECCENTRIC DOUBLE FLANGED BUTTERFLY VALVES. TIS asia
DOUBLE ECCENTRIC DOUBLE FLANGED BUTTERFLY VALVES VALVES DEDICATED TO THE WATER DISTRIBUTION NETWORK AND HYDROPOWER SECTOR WE DO NOT SELL JUST VALVES, WE SELL A SOLUTION FOR THE EFFICIENCY OF THE WATER
More informationMADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 110 C ( 130 C temporarily ) Max Pressure
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More information