EML2322L MOTOR INFORMATION (REVISED 8/18/17)
|
|
|
- Felicia McDowell
- 6 years ago
- Views:
Transcription
1 EML2322L MOTOR INFORMATION (REVISED 8/18/17)
2 4.5 RPM Double Reduction Globe Motor THRU; CSINK 0.57 X 90 ; 5 PLACES M6X mm; 4 PLACES THRU; BOLT CIRCLE 2.79 BOLT CIRCLE Current: 130mA (no load) Speed: 4.5 RPM (no load) Torque: 125 in-lb Back-drive Torque: 125 in-lb Weight: 4.5 lb
3 9 RPM Buehler Gear Motor (Long Shaft - Imperial) BOLT CIRCLE UNC 0.25; 3 PLACES Current: 20mA (no load) Speed: 9 RPM (no load) Torque: 120 in-oz Back-drive Torque: 30 in-oz (estimated) Weight: 0.6 lb
4 9 RPM Buehler Gear Motor (Long Shaft - Metric) BOLT CIRCLE M3X mm; 3 PLACES Current: 20mA (no load) Speed: 9 RPM (no load) Torque: 120 in-oz Back-drive Torque: 30 in-oz (estimated) Weight: 0.6 lb
5 11 RPM TRW Gearmotor BOLT CIRCLE UNC 3 PLACES 0.439; Current: 0.4 A (no load) Speed: 11 RPM (no load) Torque: 60 in-oz Back-drive Torque: 30 in-oz (estimated) Weight: 0.4 lb
6 15 RPM SEI Gearmotor M3X mm; 4 PLACES BOLT CIRCLE Current: 60mA (no load) Speed: 15 RPM (no load) Torque: 17.5 in-lbs Back-drive Torque: 30 in-oz (estimated) Weight: 0.4 lb
7 17.5 RPM Molon Motor UNF THRU; 4 PLACES Current: 175mA (no load) / 0.6A (full load, i.e. stall) Speed: 17.5 RPM (no load) Torque: 7.5 in-lb Back-drive Torque: 3.8 in-lb Weight: 0.8 lb
8 25 RPM Barber-Colman/Xerox Gearmotor THRU; 3 Places Speed: 25 RPM (no load) Torque: 21 in-oz Back-drive Torque: 30 in-oz (estimated Weight: 0.4 lb
9 30 IPM Spal Linear Actuator THRU; 2 PLACES S L Speed: 0.5"/second (no load) Dynamic Load: 110 lb Static Load: 500 lb Stroke (S): refer to table Model Length (L) Stroke (S) Weight (lb) 2" 7.61" 2" 2.4 4" 9.61" 4" 2.5 6" 11.61" 6" 2.7 8" 13.61" 8" " 15.61" 10" " 17.61" 12" 3.1
10 36 RPM Buehler Gear Motor (Short Shaft) M3X mm; 3 PLACES BOLT CIRCLE Current: 20mA (no load) Speed: 36 RPM (no load) Torque: 100 in-oz Back-drive Torque: 30 in-oz (estimated) Weight: 0.6 lb
11 Entstort Right Angle Drive Gearmotor BOLT CIRCLE M6 x mm; 3 Places (10MM) M8 x Current: 1.5A (no load) / 12A (full load, i.e. stall) Speed: 44 RPM (no load) Torque: 120 in-lb Back-drive Torque: 72 in-lb Weight: 2.5 lb
12 50.5 RPM Colman Motor BOLT CIRCLE UNF 0.9; 2 Places Current: 0.6A (no load) Speed: 50.5 RPM (no load) Torque: 92 in-oz Back-drive Torque: 30 in-oz (estimated) Weight: 1.4 lb
13 51 RPM Pitmann Gearmotor 4-40 UNC 0.220; 3 Places BOLT CIRCLE Current: 80mA (no load) Speed: 51 RPM (no load) Torque: 16 in-lbs Back-drive Torque: 30 in-oz (estimated) Weight: 0.4 lb
14 65 RPM Igarashi Gearmotor M3x mm Places BOLT CIRCLE Current: 0.4 A (no load) Speed: 65 RPM (no load) Torque: 60 in-oz Back-drive Torque: 30 in-oz Weight: 0.3 lb
15 150 RPM Denso Right Angle Gearmotor (Left) M4 x 0.7 THRU; 3 Places Current: 3.5A (no load) Speed: 150 RPM (no load) Torque: 30 in-lb Back-drive Torque: 11.4 in-lb Weight : 1.6 lb
16 150 RPM Denso Right Angle Gearmotor (Right) M4 x 0.7 THRU; 3 Places Current: 3.5A (no load) Speed: 150 RPM (no load) Torque: 30 in-lb Back-drive Torque: 11.4 in-lb Weight: 1.6 lb
17 200 RPM SYL Gearmotor BOLT CIRCLE M3X PLACES Current: 60mA (no load) Speed: 200 RPM (no load) Torque: 25 in-oz Back-drive Torque: 20 in-oz (estimated) Weight: 0.4 lb
18 1500 RPM Fan Motor BOLT CIRCLE; 180 APART UNC; 2 PLACES Current: 0.4A (no load) Speed: 1500 RPM (no load) Torque: 2.5 in-oz Back-drive Torque: N/A (no gearing) Weight: 2.0 lb Torque on Bolts: 20 in-lb
19 1800 RPM RETEK Motor BOLT CIRCLE A M4X0.7 2 PLACES Current: 1.5A (no load) / 5.5A (full load, i.e. stall) Speed: 1800 RPM (no load) Torque: 30 in-lb Weight: 2.6 lb DETAIL A SCALE 1 :
20 3500 RPM Globe Motor BOLT CIRCLE 6-32 UNC 0.276; 4 Places Current: 0.10A (no load) Speed: 3500 RPM (no load) Weight: 1.0 lb
21 5330 RPM CIM Motor UNF 0.380; 2 PLACES BOLT CIRCLE Current: 0.4 / 131A (no load / peak) Speed: 5330 RPM (no load) Torque: in-lb Back-drive Torque: N/A (no gearing) Weight: 2.8 lb
22 5840 RPM Mini CIM Motor UNF 0.380; 2 PLACES BOLT CIRCLE Current: 0.4 / 89A (no load / peak)3.0a (no load) Speed: 5840 RPM (no load) Torque: 12.4 in-lb Back-drive Torque: N/A (no gearing) Weight: 2.16 lb
Your Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
1, 2, 4, 6, 8, 10 and 12 in. (50, 100, 150, 200, 254, 300 mm) for all models Clevis Ends
M-Track DC Motor Acme Screw Up to 65 lb. (74 N) Rated Load Up to.75 in. (45 mm)/sec. Travel Speed M-Track compact units are completely self-contained and sealed to allow use in small spaces without sacrificing
Electric Motors and Drives
EML 2322L MAE Design and Manufacturing Laboratory Electric Motors and Drives To calculate the peak power and torque produced by an electric motor, you will need to know the following: Motor supply voltage:
TRITEX II SERIES. FULLY INTEGRATED SERVO DRIVE/MOTOR/ACTUATOR Linear or Rotary configurations AC or DC powered models Multiple networking options
Tritex II AC and DC TRITEX II SERIES FULLY INTEGRATED SERVO DRIVE/MOTOR/ACTUATOR Linear or Rotary configurations AC or DC powered models Multiple networking options Tritex II Linear AC Actuator Tritex
DC MOTORS 6 VDC MINI-MOTOR MINI-VIBRATING MOTOR VDC VIBRATING MOTOR 6 VDC 13,000 RPM MOTOR VDC MOTOR - SPECIAL PRICE 6-12 VDC MOTOR
DC MOTORS MINI-VIBRATING MOTOR Tiny motor with offset weighted shaft. Designed to vibrate in mobile communications devices. Operate on 1.5-4.5 Vdc. 15mm length including shaft. 4mm dia. without rubber.
Linear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
SERIES LVB Universal Globe Valve Linkage
SERIES LVB Universal Globe Valve Linkage Publication SLVB-101 Issue 08/14 Issue 08/14 Rev. A LVB series linkages are available for 1/2 through 6 globe valves made by most manufacturers like Johnson Controls,
UŽSISAKYKITE internetu telefonu el. paštu
Features Axial piston pump MA10VO in swashplate design is used in open loop circuits. Flow is proportional to drive speed and displacement. By adjusting the position of the swashplate it is possible to
EB Series Electro Brake
Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
Introduction to Armature Actuated Brakes (AAB) Operating Principle. Engaged Condition (power off) Disengaged Condition (power on)
Introduction to Armature Actuated Brakes (AAB) The Armature Actuated Brakes are spring-set, electrically released, friction devices, which develop holding and braking torque in the absence of electrical
Heavy Duty Actuator Type HDS and HDB With Ball Screw or Belt Drive
Heavy Duty Actuator Type HDS and HDB With Ball Screw or Belt Drive Catalog No. 0001-A Introducing Bearing Engineers new line of Heavy Duty Actuators Type HDS & HDB Construction 1. Base: Anodized Aluminum
Teknic ClearPath. Integral Horsepower Motors & Accessories D1198/B. ClearPath Integral HP Motors & Accessories
Teknic ClearPath NEM 56 Page 2 Foot Mount Kit Page 6 NEM 143/145 Page 3 IEC D100 Page 4 Regenerated Energy Shunt Page 7 and contain proprietary information. Blower Kit Page 5 Integral Horsepower Motors
Ball Slide Assemblies
NMS SERIES Ball Slide Assemblies Non-Magnetic Ball Slides Inch Version Non-Magnetic Linear Slides 6 Reasons to choose Del-Tron Non-Magnetic Ball Slides Del-Tron Ball Slides Load Ratings and Life Estimates
35 & 35D. P.O. Box 1388 West Sacramento, CA (916) Fax: (916)
35 & 35D P.O. Box 1388 West Sacramento, CA 95691 (916) 372-5411 Fax: (916) 373-0952 www.hecogear.com Model 35 Installation Dimensions Model 35CF2-66-1 (Illustrated with Code 2 Flanged Output Shaft) 1.10
Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
High Performance: EPR Series
High Performance: EPR Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPR Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications
LINEAR MOTION SYSTEMS
R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEMS User-assembled or Pre-assembled PIC now offers a comprehensive line of linear motion systems. Single sourcing eliminates the need for extensive, expensive
Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
Engineering Analysis. Team: 5 Guys Engineering + 1 Nathan Bessette, Rahul Bhatia, Andrew Cass, Glen Stewart
Engineering Analysis Presentation ME 4182 Team: 5 Guys Engineering + 1 Nathan Bessette, Rahul Bhatia, Andrew Cass, Zeeshan Saiyed, Glen Stewart YJ JChok Automatic Whiteboard Wiper Last Time Last Time Layout
Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
PERFORMANCE with: Duty Cycle Fi = 100 % over 10 min. at 25 C environment
5.1 BALL SCREW LINEAR ACTUATOR BSA 10 Compact ball screw linear actuator with integral electric motor suitable for push and pull motions. Rolled and hardened ball screw. Case hardened and ground ball nut.
KEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
Technical Service Parts Breakdown
Parts Breakdown Group: 4000 J10 6 Diode Notes: Form: SP1013 Refer to SP1013 -DWG for major component drawing. Date: December 1, 2009 Refer to TSB-30 for hardware kit breakdown for File: Alternator Parts
300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
EXPERTS IN MOTION CONTROL I N D U S T R I A L P R O D U C T S
EXPERTS IN MOTION CONTROL I N D U S T R I A L P R O D U C T S COMPANY-WIDE COMMITMENT TO QUALITY At Globe Motors, we re committed to providing customers with products and services that meet or exceed their
ElectroCraft RapidPower Xtreme Brushless DC Servo Motors
ElectroCraft RapidPower Xtreme Brushless DC Servo Motors Product Datasheets for RPX22 RPX32 RPX4 RPX52 About ElectroCraft is a global provider of dependable, application-engineered fractional-horsepower
EB Series Electro Brake
Shaft Mounted Brakes for Power-On Applications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
FBK-FRCA. Return Line Filters Low Pressure Filters In-Line up to 10 bar. Mix&Match to Get What You Need
Return Line Filters Low Pressure Filters In-Line up to 10 bar Mix&Match to Get What You Need Donaldson's Mix&Match system provides the great performance and functional advantages of custom-engineered filters
ANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
MOUNTING CARRIAGE TOPS
MOUNTING CARRIAGE TOPS Linear Motion Systems " I " Holes (4) are for customer mounting purposes. MOTOR TABLE TOPS USE M4X.7 TAPPED HOLES Material: Aluminum Alloy (6061) Finish: Black Anodized Note: Mounting
Y20EBA Linkage Kit, M100 to Barber-Colman 1/2 to 1-1/4 Inch Valves
Installation Sheets Manual 121 Also in FANs 977, 628.1 Technical Bulletin Issue Date 0893 Y20EBA Linkage Kit, M100 to Barber-Colman 1/2 to 1-1/4 Inch Valves lntroduction 2 Application Details *2 Glossary
DO NOT INSTALL, OPERATE, OR MAINTAIN AN ATI PRODUCT UNLESS TRAINED AND QUALIFIED IN PRODUCT AND ACCESSORY INSTALLATION, OPERATION AND MAINTENANCE.
IOM Supplement IOMS006 ATI SPLIT COUPLING VALVE STEM CONNECTION Scope of Supplement This supplement is intended to assist those who are involved with the installation, operation and maintenance of ATI
FT Series Linear Actuators
FT Series Linear Actuators Exlar FT Series force tube actuators use a planetary roller screw mounted inside a telescoping tube mechanism. The follower is attached to the moveable force tube, which then
Solutions. ydraulics. Manufacture. H y d r a u l i c s. Eaton Hydrostatic Transaxles. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton h y d r a u l i c s We Models 751, 851, 771, and 781 Manufacture Solutions S o l u t i o n s Models 751, 851, 771, and 781 Eaton Eaton Models 751, 771, 781, and 851
INDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Rugged, high load capacity mounts provide vibration, shock and noise protection A P P L I C A T I O N S Cabs/platforms Engines Generator sets Transmissions Compressors Fuel tanks
LINEAR ACTUATOR INDUSTRIAL DUTY 10B SERIES
Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame with stainless steel extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm],
Series PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
DC MOTORS 6-12 VDC MOTOR MINI-VIBRATING MOTOR VDC VIBRATING MOTOR 6-12 VDC MOTOR VDC MOTOR - SPECIAL PRICE 12 VDC MOTOR 8-16 VDC MOTOR
DC MOTORS MINI-VIBRATING MOTOR 6- Tiny motor with offset weighted shaft. Designed to vibrate in mobile communications devices. Operate on 1.5-4.5 Vdc. 15mm length including shaft. 4mm dia. without rubber.
Airflex. Airflex CBC Clutch/Brake Combination. Today s answer for high cyclic, heavy-duty industrial applications. Authorized Distributor
Airflex Airflex CBC Clutch/Brake Combination Today s answer for high cyclic, heavy-duty industrial applications. Authorized Distributor 26255 Groesbeck Hwy. Warren, MI 48089 U.S.A. 586.775.3000 586.775.3040
Escapements. AGE Series
GE Series Escapements merican Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 Fax: 203-452-5943 info@gi-utomation.com www.gi-utomation.com 1 GE-1 Feed Escapement uilt-in ir Cylinder
Pilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
MAP Sensor. Technical Spec COPY RIGHTS ECOTRONS ALL RIGHTS RESERVED ECOTRONS LLC. -Manifold Absolute Pressure Sensor
MAP Sensor -Manifold Absolute Pressure Sensor Technical Spec ECOTRONS LLC COPY RIGHTS ECOTRONS ALL RIGHTS RESERVED Note: If you are not sure about any specific details, please contact us at info@ecotrons.com.
ANALOG. PARAMETER SPECIFICATION Measured Variable: Displacement, Velocity (magnitude only) 16 bit or mm, whichever is greater
T E M P O S O N I C S I I I ANALOG P r o d u c t S p e c i f i c a t i o n s F e a t u r e s Superior resolution and repeatability Absolute displacement and velocity measurement Modular, non-contacting
Sold & Serviced By: ELECTROMATE. Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099
PITTMANEXPESS Welcome to Pittman ExpressSM The PittmanExpress program lets you choose from a selection of over 100 quality Pittman motors. PittmanExpress offers you a convenient source of quality products
PSI Series Features: Trouble-free design for long life. Simple mechanical actuation
CROSSOVER DRIVES Wrap Spring Clutches Ideal for Overrunning, Start- Stop, and Single Revolution Applications The Crossover Drives clutches are the basic form of wrap spring clutch design. For start-stop
INDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Features One piece bonded construction High load capacity Low natural frequency Non-linear stiffness Snubbing feature on bottom Benefits Consistent performance Rugged, high load
LINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES
Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],
TRITEX II SERIES FULLY INTEGRATED SERVO DRIVE/MOTOR/ACTUATOR
Tritex II AC and DC TRITEX II SERIES FULLY INTEGRATED SERVO DRIVE/MOTOR/ACTUATOR Linear or Rotary configurations AC or DC powered models Multiple networking options Tritex II Linear AC Actuator Tritex
E-TRAC. Power Wheel. Drive Systems AuburnGear.com
E-TRAC Power Wheel Drive Systems 260.925.3200 AuburnGear.com General Information Customer Application Model or Type Design Life Required L10 Power Source: Power Plant - Voltage Requirements: Wheel Drive
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders
13. Radial Piston Motors
Denison Calzoni - LSHT radial piston motors 13. Radial Piston Motors Fixed Displacement... Page 13-2 Maximum Pressure Cont. / Interm. () Displacement Range (in 3 /rev) Remarks Pages MR 3600 / 4400 2.0-426.8
Identifying the Motorized RGS part number codes when ordering
RGS04 Motorized with 28000 Series Size11 DS RGS04 Linear Rail for Hybird 28000 Series Size 11 Double Stacks and RGS04 for 43000 Series Size 17 Single and Double Stacks (See Page 4) RGS04 Linear Rail with
High quality nut and screw materials are precisely formed to reduce backlash, increase life, support maximum force, and increase efficiency
Linear Actuators owerlustechnology...03 Model Number System...04 Basic Styles Lead & Linear Travel...05 Optional Construction & Modifications...06 Size 8 -.8 - Lx08HY Series...07 Size -.8 - LxHS Series...0
LINEAR ACTUATOR INDUSTRIAL DUTY LACT BALL SCREW DRIVE
Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame with stainless steel extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [152mm], 8 [203mm], 12 [305mm],
Service Bulletin-04. Mechanical Dimensions of Vacuum Capacitors
Plasma Control Technologies Service Bulletin-04 Mechanical Dimensions of Vacuum Capacitors When installing or removing vacuum capacitors, extreme care must be taken to avoid damage to the body of the capacitor,
Flow Line Controls Positioner Specifications Series 55 3-15 psi Pneumatic Series 56 4-20 ma Electro-Pneumatic Series 55 Series 56 Flow Line Controls, Inc. P.O. Box 677 Schriever, LA 70395 Phone: 985-414-6003
50:1 Metal Gearmotor 37Dx54L mm with 64 CPR Encoder
50:1 Metal Gearmotor 37Dx54L mm with 64 CPR Encoder Pololu item #: 1444 23 in stock Price break Unit price (US$) 1 39.95 10 35.96 Quantity: 1 backorders allowed This 2.62" 1.45" 1.45" gearmotor is a powerful
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
Sold & Serviced By: ELECTROMATE. Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099
AVM Specifications Model Units AVM 12-6.4 AVM 19-5 AVM 20-10 AVM24-5 AVM24-10 Stroke mm 6.4 5 10 5 10 Force sensitivity (at mid stroke) N/A 0.57 1.75 2.00 3.00 3.90 Back EMF constant V/m/s 0.57 1.75 2.00
PARALLEL INDEX DRIVES TP Series
PARALLEL INDEX DRIVES TP Series Calculations J = moment of inertia Application examples Direct driven belt/chain = M B + M B M B = c a n 2π n x t² M R = µ g R m = M B + M R + (M ST )* M ST = m g R M AN
Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14
![Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14](/thumbs/85/92068474.jpg "Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14")
1.4 ACME SCREW LINEAR ACTUATORS Series ATL Technical features table Servomech SIZE FEATURES ATL 10 ATL 20 ATL 25 ATL 30 ATL 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55
EL Series Explosion Proof Linear Actuators
EL Series Explosion Proof Linear Actuators The EL Series linear actuators offer users all of the advantages of Exlar s patented inverted roller screw actuator designs in a Class I, div 1, Groups B, C or
Spring Mounts Damped Type To 200 lbs.
Spring Mounts Damped Type To 200 lbs. CO MP O NE NTS MATERIAL: Base Plate Mild Steel Spring igh-tensile Steel - Phosphated & Dyed Black End Cap Cast Light Alloy STAINLESS STEEL MES FOR LOADS OF 60 TO 200
M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications
FANs 268.1, 1628.3 Product Bulletin M100Q Issue Date 1099 M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications The M100Q is a temperature-controlled unit for
Globe Valve Retrofits
Globe Retrofits Contents How to Select the Globe Retrofit Solution... pg 33 Globe Retrofit Actuators... pg 34 Solutions for Specific Manufacturer and Part Number Honeywell... pg 37 Johnson Controls...
Globe Valve Retrofits
Globe Valve Retrofits Contents How to Select the Globe Valve Retrofit Solution... pg 33 Globe Valve Retrofit Actuators... pg 34 Solutions for Specific Manufacturer and Part Number Honeywell... pg 37 Johnson
Air Springs for Industrial Applications
Air Springs for Industrial Applications Air Spring Overview ITT air springs are air-tight and sturdy pneumatic actuators for demanding industrial applications. Air springs are highly durable, precisely
Linear actuators ILA Series
Linear Actuator ILA Series without input drive, with flange and input shaft Linear Actuator ILA Series with input drive - with 2 bevel gearmotors - with single bevel gearmotor - with helical coaxial or
THREADED INSERTS.
www.jergensinc.com 10 Bolster Plate Bushings... 10.5 Installation and Removal Instructions... 10.2 Internal Locking Thread Repair Insert... 10.8-10.9 Keylocking, Extra Heavy Duty Industrial Style... 10.6
Gearboxes & Motor Mounts
Gearboxes & Motor Mounts Contents Description Page Gearbox for BHD Series 162-164 Gearbox for OSP-E Belt 165-168 Motor Mounts 169-170 Belt Gear for OSP-E..S, SBR 171 161 PLANETARY GEARBOX FOR THE OSP-E
Pressure Sensor - EPT3100
Pressure Sensor - EPT3100 Up to 4000 Bar pressure range High strength, rugged stainless steel design Competitively priced The EPT3100 is a high quality all stainless steel pressure transducer, intended
Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14
![Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14](/thumbs/74/70970853.jpg "Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14")
1.4 ACME SCREW LINEAR ACTUATORS Series ATL Technical features table Servomech SIZE FEATURES ATL 10 ATL 20 ATL 25 ATL 30 ATL 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55
WIRE ROPE ISOLATORS C/CB SERIES APPLICATIONS HELICAL WIRE ROPE ISOLATORS FEATURES & BENEFITS
0.03-1.50 APPLICATIONS HELICAL The C/CB Series isolators are made up of helical, stranded-wire rope held with rugged metal retaining bars. This design provides excellent shock and vibration isolation in
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
Male Rod Ends. MP series 18. MH series 22. RM series 25. MB series 27. MS series 30. MSX series 34. MSX (Motor Sport) series 36.
16 Male Rod Ends MP series 18 MH series 22 RM series 25 MB series 27 MS series 30 MSX series 34 MSX (Motor Sport) series 36 MX series 38 MP-SERIES: MP - MPS - MP SS Description MP-Series is our 3-piece
TYPICAL APPLICATIONS FOR EL SERIES EXPLOSION-PROOF MOTORS ARE WELL-SUITED TO MANY APPLICATIONS SUCH AS:
EL Series Explosion Proof Linear Actuators The EL Series linear actuators offer users all of the advantages of Exlar s patented inverted roller screw actuator designs in a Class I, div 1, Groups B, C or
Keystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
Pilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
AGR Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Enhanced speed and load capacity
AGR Series Mechanical-Bearing, Worm-Driven Rotary Stage Enhanced speed and load capacity Innovative precision worm-gear assembly (patent pending) provides outstanding accuracy and repeatability over a
Biffi Morin S series actuators
Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 26890 Nm Features and benefits General applications For remote control of any quarter-turn application:
Gearboxes & Motor Mounts
Gearboxes & Motor Mounts Contents Description Page Gearbox for BHD Series 134-136 Gearbox for OSP-E Belt 137-140 Motor Mounts 141-142 Belt Gear for OSP-E..S, SBR 143 133 PLANETARY GEARBOX FOR THE OSP-E
Bettis CBB-Series Technical data sheet - Imperial
DOC.DSB.CBB.US Bettis Technical data sheet - Imperial Sheet No.: CBPI 1.01 RevB Date: February 2010 Torque Ratings (Pneumatic) All Published Torques are Guaranteed Minimum Values. Double-Acting s CBB 315
Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14
![Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14](/thumbs/89/97845709.jpg "Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14")
1.4 ACME SCREW LINEAR ACTUATORS Series ATL Technical features table Servomech SIZE FEATURES ATL 10 ATL 20 ATL 25 ATL 30 ATL 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
Bettis CBB-Series Technical data sheet - Metric
DOC.DSB.CBB. Bettis Technical data sheet - Metric Sheet No.: CBPM 1.01 RevB Date: February 2010 Torque Ratings (Pneumatic) All Published Torques are Guaranteed Minimum Values. Double-Acting s CBB 315 CBB
Globe Valve Retrofits
Globe Valve Retrofits Contents How to Select the Globe Valve Retrofit Solution... pg 33 Globe Valve Retrofit Actuators... pg 34 Solutions for Specific Manufacturer and Part Number Honeywell... pg 37 Johnson
Toll Free: 877/ Fax: 814/
Low Profile Avionics Mounts (AM ) Low profile, all-direction vibration and shock mounts for avionics equipment and other sensitive devices Lord Corporation low profile Avionics Mounts (AM ) set the standard
LINEAR ACTUATOR INDUSTRIAL DUTY LACT ACME DRIVE SERIES
Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [152mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],
Accessories Series PSB. Specifications
Catalog HY14-252/US Technical Information General Description electrohydraulic pressure switches are high performance devices that provide an electrical signal when sensed pressure rises above or falls
LINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES
Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],
Simplus
Simplus in Latin means Simple. We focus on making direct drive 1 actuators that are simple to use, plus the additional benefits of: small form factor higher performance better reliability 1 direct drive
DS4-SERIES POSITIONING TABLES
www.danahermotion.com/ds4 DS4-SERIES POSITIONING TABLES Performance & Versatility in a compact design For single- & multiaxis requirements, DS4 is your modular solution. PERFORMANCE DURABILITY FLEXIBILITY
FTP Series HIGH FORCE ELECTRIC PRESS ACTUATOR
FTP Series HIGH FORCE ELECTRIC PRESS ACTUATOR Ideal hydraulic press replacement Industry-leading power density Rugged and reliable Flexible and precise 952.500.6200 www.exlar.com 75 FTP Series High Force
Ultran Cylinders. Ultran Band Rodless Cylinders. Ultran High Load Slides. Ultran Application Checklist. Ultran High Load Electric Slides
5.3-5.4 5.5-5.12 5.13-5.23 5.24-5.32 Ultran Band Rodless 5.33-5.43 Ultran Application Checklist 5.44 Electric 5.45-5.53 Ultran Ultran Bimba Ultran SPACE SAVINGS OF ALMOST 50% IN MOST MODELS Two Models:
Proportional Control Valves
Proportional Control Valves www.humphrey-products.com ProControl Proportional Valves Humphrey ProControl Proportional Valves provide superior proportional control performance, versatility, and value. Utilizing
High-Performance Step Motors in a Wide Variety of Sizes and Voltages
High-Performance Step Motors in a Wide Variety of Sizes and Voltages The LV (Low Voltage) and HV (High Voltage) motor series provides outstanding performance at a competitive price. The LV 11, 14 and 17
Handwheels, Limit Stops and Lever Operators
Sizing & Selection 18 Handwheels, Limit Stops and Lever Operators LINEAR ACTUATOR HANDWHEELS Valtek linear actuators are available with two types of handwheel designs: the continuously connected handwheel
New! Parallel Actuators. In-line Actuators. Controls. Contents. Programming
Danaher Linear has long been the leader in ball bearing screws and linear actuators. This new line of Electrak programmable linear actuators offers an expanded range of performance in life, load carrying