bott vario In-Vehicle Equipment

Transcription

1 bott vario In- Equipment 2016 Full range of products and accessories

2 2016 Table of Contents 2

3 bott Table of contents bott vario, the in-vehicle equipment system Floors and linings Containers for flatbed vehicles- botttainer Load restraint blanket for flatbed vehicles 59 VarioCar - boot floor inserts for estate cars bott vario Modules Under-floor modules Heavy duty sliding platforms 100 variopin locking system for selected cabinets 101 Drawer dividers Mobile working and transport of long items Gas cylinder transport / Ventilation Window grilles Load restraint (lashing straps, anti-slip mats, clamping bars) Roof Rack Systems Accessories Light and Energy Case systems and boxes for cubio and bott vario bottbox - the new standard Euroboxes, aluminium transport cases Service cases and plastic storage boxes Service cases, aluminium and steel

4 Hiermit wird bescheinigt, dass das Qualitätsmanagementsystem der durch Intertek Certification GmbH auditiert und zertifiziert wurde in Bezug auf die Anforderungen der Geltungsbereich des Qualitätsmanagementsystems Entwicklung, Fertigung und Vertrieb von Betriebseinrichtungen, Fahrzeugeinrichtungen und Montagearbeitsplätzen Zertifikat-Reg.-Nr.: Gültigkeitszeitraum: bis Erst-Zertifizierung am: Ausstellungsdatum: Christina Weiglein, Zertifizierungsstelle Intertek Certification GmbH - Hanns-Martin-Schleyer-Straße 2, D Moenchengladbach, Deutschland In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate s validity is subject to the organization maintaining their system in accordance with Intertek s requirements for systems certification. Validity may be confirmed via at certificate.validation@intertek.com or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon request. Hiermit wird bescheinigt, dass das Umweltmanagementsystem der durch Intertek Certification GmbH auditiert und zertifiziert wurde in Bezug auf die Anforderungen der Geltungsbereich des Umweltmanagementsystems Entwicklung, Fertigung und Vertrieb von Betriebseinrichtungen, Fahrzeugeinrichtungen und Montagearbeitsplätzen Zertifikat-Reg.-Nr.: Gültigkeitszeitraum: bis Erst-Zertifizierung am: Ausstellungsdatum: Christina Weiglein, Zertifizierungsstelle Intertek Certification GmbH - Hanns-Martin-Schleyer-Straße 2, D Moenchengladbach, Deutschland In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate s validity is subject to the organization maintaining their system in accordance with Intertek s requirements for systems certification. Validity may be confirmed via at certificate.validation@intertek.com or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon request. High stability, sturdiness and durability: These are the main principles of bott. They provide the fundamental foundation for making your investment worthwhile. Furthermore, bott ensures its production and logistics process with internal and external guidelines and inspections. Our quality principles Certified according to DIN EN ISO 9001:2008 Certified environmental management according to ISO 14001:2009 Products have GS mark for TÜV-tested safety (German safety standard) Certified Quality Bott is a certified body builder for a few major commercial vehicle manufacturers. Therefore, bott must consistently demonstrate very high standards of service and guarantee the best quality of its products. Zertifikat Zertifikat Bott GmbH & Co. KG Bahnstraße 17, D Gaildorf Bott GmbH & Co. KG Bahnstraße 17, D Gaildorf DIN EN ISO 9001:2008 DIN EN ISO 14001:

5 Der Status EDITION-Partner steht für eine exklusive Zusammenarbeit im Einrechnungsgeschäft mit der PEUGEOT Deutschland GmbH. Der EDITION-Partner erfüllt die hohen Anforderungen der PEUGEOT Deutschland GmbH in Bezug auf Qualität, Sicherheit, Service und Marketing. Die Einhaltung der Standards wurde vor Ort geprüft. Köln, Carsten Schopf Direktion Vertrieb Businesskunden Peugeot Deutschland GmbH Alexander Kaiser Direktion Nutzfahrzeuge Umbauten und Sonderlösungen Peugeot Deutschland GmbH bott Quality and standards Values bott places great importance on the quality and durability of its products. Their robust design will pay for itself over the years. Steel components are powder-coated. These surfaces can withstand the heaviest loads, notes Thomas Rother from the protoype development Department. bott employs the most modern production process methods. Their installation methods follow the best technological stateof-the-art trends. This ensures the highest possible quality of the production process that we employ here, in Gaildorf. Being able to contribute to our customers' satisfaction every single day makes me really happy, Joachim White Berger, employee in the sheet metal centre. Experience ZERTIFIKAT Der Aufbauhersteller Bott GmbH & Co. KG ist EDITION-Partner der PEUGEOT Deutschland GmbH bott offers me security and good prospects for my future. The high demands of the company in regards to quality and durability of the products are also reflected in the favourable working climate. Many of my colleagues have already been working here for a very long time, Patrick Rosenberger, Team Leader, Incoming Goods Department 5

6 bott facilities and daughter companies Export partners bott. working efficiently. 6

7 bott An introduction bott international Personal consulting Customers worldwide recognise bott as a leading manufacturer of in-vehicle equipment, workstation storage solutions along with workshop equipment and use our innovative product ranges in all areas. Although bott products are highly diverse, they all share the system concept and professional application on the part of their users. With production facilities in Germany, the UK and Hungary, as well as other sales and distributions organisations in France, Austria, Denmark and Italy, bott can boast an extensive service network. With the help of license partners and importers who are located in various countries around the world, bott can cater to individual local needs of its clients - from planning to installation. At the bott group s German headquarters, the latest information is gathered from every market to enable the evolution of new and innovative strategies. Therefore, efficient work and customer safety is always a high priority. 7

8 bott vario The in-vehicle equipment individual planning and configuration optimal space organisation low weight crash tested 8

9 bott vario The in-vehicle equipment Conditioned for your success.. bott vario Order and cleanliness as optimal conditions for efficient work are essential for vehicle operation and service. bott vario in-vehicle equipment creates ideal conditions for mobile use to tackle all challenges and guarantee long-term success. bott vario in-vehicle equipment uses optimal loading space. It organises tools, machines and supplies in a systematic and clear manner. This saves time for the essential tasks and challenges that any service employee faces daily during their workday. The mix of materials made of steel, aluminium and plastic provide for a balanced harmony of lightweight, stability and durability. Moreover, numerous load-restraint elements provide great means for road safety. With bott vario in-vehicle equipment, any cargo can be lashed quickly, easily and securely. 9

10 bott vario Range of services Analysis, design and individual planning Installed and delivered at your local service partner Custom solutions available Fast, dependable delivery times Tested safety Availability guarantee ISO-certified 9001: :2009 International availability Crash tests in accordance with ECE R44 AFTER SALES Service Support before, during and after installation Year warranty* *bott grants the ultimate purchaser (end user), in addition to the statutory warranty, a 3-year product warranty in accordance with bott warranty conditions. bott guarantees for a period of 3 years from date of delivery that the supplied products are free from defects in terms of materials and workmanship. Warranty does not cover electronic components and modules. 10

11 bott vario Colour scheme for in-vehicle equipment Environmentally friendly, durable powder coating of steel parts Scratch-resistant surfaces thanks to anodised aluminium High-quality anodised aluminium surfaces and powder coated steel components with a finely textured finish characterise the distinctive design of bott vario in-vehicle equipment. Its neutral design makes it suitable for any vehicle colour. Accessories such as bottboxes, the practical variosort service case or the robust variosafe carry box can be easily integrated and perfectly blend into the overall visual appearance. bott vario Colour combination:.19 anodised aluminium anthracite grey RAL colour: 7016 Colours shown may not match the original colours due to printing-related reasons. 11

12 Endframe Sturdy construction made of highstrength steel Connecting link between the load and the vehicle Puncture-proof Optionally available with lashing rails Drawers Anodised aluminium surface Quick, organised access from above with convenient handling Ergonomically shaped, smooth-operating handle: easy to open, even with gloves Secure two-sided locking system with steel locking pins, with optional variopin Drawer slides with detente: stops open drawers from closing on a slope Ball-bearing full extension slide, load capacity up to 40 kg for standard duty or 70 kg for heavy duty 12

13 bott vario The in-vehicle equipment bott vario Trays bottboxes sliding shelves Anodised aluminium surface High load capacity Intelligent roll-formed and folded reinforcements Transparent viewing window Boxes secured in transport Box slides prevent boxes from falling out Easy box removal Boxes as either storage, bulk or grab boxes Optional transparent dividers and lids Highly convenient for carrying Smooth inner walls Label strip 13

14 Aluminium base unit drop front Anodised aluminium surface For the safe storage of cargo in the base compartment Drop-front height less than base compartment height: Allows full view of cargo when closed Strong enough for standing on Can be closed with the toe cap of the shoe vertical lashing rails In-vehicle equipment provides for integrated load-restraint solutions Easy to handle Suitable for all bott lashing straps with fitting Edge protection Protects loaded goods Protects occupants Soft PVC with cover cap Drop front storage pocket To make good use of the space in the wheel arch area Provides a safe means of transporting small to medium-sized goods With gas struts for comfortable operation 14

15 bott vario The in-vehicle equipment variocase service case Anodised aluminium surface Low weight Corner guards for smooth surfaces Ergonomic handle variosort Comfortable one-handed operation thanks to a patented locking mechanism Transparent lid Can be securely connected together with variosafe bott vario variosafe varioslide Clamping unit Carry box with lockable lid Interior compartments created using small parts storage boxes, dividers and die-cut foam inserts Integral latching mechanism allows several cases to be stacked and simultaneously secured together Smooth inner walls Drawer stop integrated in varioslide guides Easy removal Convenient, safe clamping of different case sizes For mounting between the endframes Clamping with cam lever Load can be clamped to left or right 15

16 Storage depot for small parts Adjustable guides Organised storage Items slide independently variocart Retractable/removable Open structure: improved ventilation Roll depot For holding cable, hose and belt rolls Adjustable roll width Convenient loading and unloading by opening the drop-front Winding when drop front closed perfo accessories perfo perforation on the side walls, endframes and perfo panels for attaching perfo hook kits and indispensable accessories from the bott perfo product range 16

17 bott vario The in-vehicle equipment Drop-front shelves Anodised aluminium surface protection - low weight Different drop-front heights are available Storage of tools and containers with convenient front access Reinforcing profile on the under side for high stability 180º opening angle: freedom of movement, convenient loading with no lip Eurobox shelf Integration and use of industry-standard containers Positioning aid for each box: Slip protection Includes Euroboxes in different dimensions bott vario Long-item top tray Anodised aluminium surface Low weight Rear access gained via latched drop-front Convenient to load and unload without entering the vehicle For storing long items Long-item holder Quick access High level of protection Secure transport 3 sizes 17

18 Lashing rail Gas cylinder restraint system Roller shutter system In-vehicle equipment provides for integrated load-restraint solutions Easy to handle Suitable for all bott lashing straps with fitting Crash-tested design Offers good adjustment options Ratchet strap For privacy and theft prevention For integration in shelving bays and base compartments Aluminium guide rails and handle for a highly sturdy construction Hinged door cupboard Lockable Inside of door with perfo perforations for attaching perfo tool holders Automatic locking mechanism when door closed Optionally available with variopin Sump shelf with drip tray For transporting containers with liquids Protects against leaking fluids and contamination thanks to the seam-welded shelf and drip tray Includes cargo restraint track and lashing strap for securing the load 18

19 bott vario The in-vehicle equipment Folding worktop Worktop made of beech multiplex Folding, thereby low centre of gravity Finger protection Optional support leg Retractable worktop Worktop made of beech multiplex Ergonomic clamping handle Optional support leg bott vario Heavy duty sliding platform Provides optimal access to and ergonomic loading and unloading of heavy items Locks automatically into position when fully extended or fully closed Integrated lashing points Wide handle Horizontal refrigerant shelf Secure transport of refrigerant bottles Can be easily accessed from the outside 19

20 bott vario 3D planning analysis design planning production installation support 20

21 bott vario Design, planning and realisation With its unique modularity, bott vario offers the perfect basis for in-vehicle equipment adapted exactly to your demands. bott personally designs the right solution for you Following detailed needs assessments, 3D drawings are used to create illustrative offers. bott already pinpoints initial ideas at the beginning of the consultation phase on the basis of demonstration vehicles. bott vario Together with bott planning specialists, you will decide where the equipment gets installed inside the vehicle. bott analyses the desired vehicle equipment and organises work space in the vehicle in an optimal manner. Only trained personnel can install bott vario in-vehicle equipment. Your safety is bott's top priority. 21

22 22

23 bott vario The in-vehicle equipment Proven security. bott engineers regularly conduct crash tests and demonstrate how safe the bott vario in-vehicle equipment is for the vehicle passengers. Independent experts carry out tests with fully loaded vehicles in such a way that loads on the components are distributed in the same manner as during a road accident. Such crash tests simulate an impact of a vehicle with an obstacle at a speed of 50 km/h - pursuant to ECE directive R44. In particular, testers go over the following questions: bott vario Does bott vario absorb the dynamic energy? Does the cargo stay where it belongs? Are the extreme forces successfully dissipated? bott vario in-vehicle equipment always meets the highest requirements of the tests. Results of the tests demonstrate that the driver and the front passenger can rely on bott vario in case of emergency. 23

24 bott vario In practice 24

25 bott vario Reference examples bott vario 25

26 bott vario In practice 26

27 bott vario Reference examples bott vario 27

28 bott vario In practice 28

29 bott vario Reference examples bott vario 29

30 bott vario Floors and linings sturdy body protection versatile attachments for load-restraint equipment easy-to-clean loading space 30

31 bott vario Floors and linings Side lining panels Precisely matching contours Minimal weight with high impact strength Optionally available as high-strength plastic, wood or perforated aluminium sheet Easy-to-clean surfaces bott vario Floor Sturdy materials Non-slip surfaces Edge protection near door openings Built-in lashing rails Access to factory-installed lashing points Cut-outs for ventilation Roof liners Easy-to-clean surface Can be fitted with lights For a holistic appealing look inside the vehicle 31

32 bott vario Roof liners Express delivery available vario protect-light roof liners Contoured roof-lining panels made from recyclable polypropylene (vario protect-light) Twin-wall sheets, 4 mm thick with a one-sided coarse texture Colour: light grey (RAL 7035) UV-stable, low weight, corrosion resistant, non-decomposable, chemical resistant Easy to clean Fixings included type Build year from Wheelbase packed Citroen Berlingo / Peugeot Partner Fiat Doblò / Opel Combo Maxi L2/H Ford Transit Custom L1/H Ford Transit Custom L2/H Ford Transit L2/H Ford Transit L3/H Mercedes-Benz Citan Mercedes-Benz Vito Compact Mercedes-Benz Vito Long Mercedes-Benz Vito Extra long Mercedes-Benz Sprinter / Volkswagen Crafter L1/H Mercedes-Benz Sprinter / Volkswagen Crafter L1/H Mercedes-Benz Sprinter / Volkswagen Crafter L2/H Mercedes-Benz Sprinter / Volkswagen Crafter L2/H Mercedes-Benz Sprinter / Volkswagen Crafter L2/H Mercedes-Benz Sprinter / Volkswagen Crafter L4/H * Opel Vivaro L1 / Renault Trafic L1/H Opel Vivaro / Renault Trafic L2/H Nissan NV400 / Opel Movano / Renault Master L2/H2 RWD/FWD Nissan NV400 / Opel Movano / Renault Master L3/H2 RWD/FWD / Renault Kangoo L Volkswagen Caddy Volkswagen T6 L1/H * with overhang Express delivery available 32

33 bott vario Floors and linings bott vario 33

34 bott vario Floors Express delivery available bott vario floor Light and moisture-repelling 12 mm birch multiplex floor Top side: robust and slip-resistant synthetic resin film coating with bott decoration Underside: synthetic resin film coating with smooth finish Edges: profiled, moisture-resistant grey finish with aluminium edge protection in the door area E1 class pollutant in accordance with EN Anti-slip R12, Taber value > 500 Fixings included Much simplified installation with hold-down cups now possible Installation with hold-down cups Citroën Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Nemo Berlingo Berlingo long Jumpy L1H * 2 Jumpy L2H * 3 Jumpy L2H Jumper L Jumper L Jumper L Jumper L * *with overhang 3 with tread edge protection Dacia Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Dokker Express Logan Van / Express Mounting without a bracket 3 with tread edge protection Express delivery available 34

35 bott vario Floors bott vario floor Fiat Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Fiorino Scudo L1H Scudo L2H Scudo L2H Doblò L * 3 Doblò L * 3 Ducato L Ducato L Ducato L Ducato L * *with overhang 3 with tread edge protection Ford Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Transit Courier Transit Connect L Transit Connect L Transit Custom L1H Transit Custom L1H Transit Custom L2H Transit Custom L2H Transit FA L Transit HA L Transit FA L Transit HA L Transit HA L L Mounting without a bracket 3 with tread edge protection bott vario 35

36 bott vario Floors Express delivery available bott vario floor Hyundai Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 H350 L H350 L with tread edge protection Iveco Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Iveco Daily L Iveco Daily L2H Iveco Daily L2H Iveco Daily L L* Iveco Daily L Iveco Daily L L* *with overhang 3 with tread edge protection Mercedes-Benz Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Citan Compact Citan Long Citan Extra Long Vito Compact Vito Compact Vito Long Vito Long Vito Extra Long Vito Extra Long Sprinter L Sprinter L Sprinter L Sprinter L * *with overhang 2 Mounting without a bracket 3 with tread edge protection 4 shortened floor with a lip for plastic fuel cans in the back Express delivery available 36

37 bott vario Floors bott vario floor Nissan Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Primastar L1/H Primastar L2/H NV NV 400 FWD-L NV 400 FWD-L NV 400 FWD-L NV 400 RWD-L NV 400 RWD-L Mounting without a bracket 3 with tread edge protection bott vario 37

38 bott vario Floors Express delivery available bott vario floor Opel Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Combo L * 3 Combo L * 3 Vivaro L1-H Vivaro L2-H Movano FWD-L Movano FWD-L Movano FWD-L Movano RWD-L Movano RWD-L Mounting without a bracket 3 with tread edge protection Peugeot Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Bipper Partner Partner long Expert L1H Expert L2H Expert L2H Boxer L Boxer L Boxer L Boxer L * *with overhang 1 H1 only 2 Mounting without a bracket 3 with tread edge protection Express delivery available 38

39 bott vario Floors bott vario floor Renault Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Kangoo Compact Kangoo Kangoo Maxi Trafic L1-H Trafic L2-H Master FWD-L Master FWD-L Master FWD-L Master RWD-L Master RWD-L Mounting without a bracket 3 with tread edge protection Toyota Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Proace L1H Proace L2H Proace L2H only H1 Volkswagen bott vario Build year from Wheelbase Floor without tread edge protection Floor with tread edge protection Floor with lashing rails across Number of lashing rails across Floor with lashing rails lengthwise 3 Caddy Caddy Maxi T6 L T6 L Crafter L Crafter L Crafter L Crafter L * *with overhang 1 H1 only 2 Mounting without a bracket 3 with tread edge protection 39

40 bott vario Side lining panels Express delivery available vario protect-light side lining options Side lining panels = Basic set Side lining panels 1 Side lining panels + 2 sliding door panel + 3 = rear door set Complete set with rear and sliding door 1 Side lining panels Complete set with tailgate and = Tailgate set sliding door sliding door panel Express delivery available 40

41 bott vario Side lining panels vario protect-light in-vehicle lining Contoured side lining panels made from recyclable polypropylene Twin-wall sheets, 4 mm thick with a one-sided coarse texture Colour: light grey (RAL 7035) UV-stable, low weight, corrosion resistant, non-decomposable, chemical resistant Easy to clean Fixings included Citroën Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Nemo Berlingo Berlingo long Jumpy L1-H1-H Jumpy L2-H1-H Jumper L1-H Jumper L1-H2 T* Jumper L2-H Jumper L2-H2 T* Jumper L3-H2 T* Jumper L3-H3 T* Jumper L4-H2 T* * Jumper L4-H3 T* * * with overhang T* Design with high roof lined over entire height bott vario Dacia Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Dacia Dokker

42 bott vario Side lining panels Express delivery available vario protect-light in-vehicle lining Fiat Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Fiorino Doblò L1-H Doblò L2-H Doblò L1-H Doblò L2-H Scudo L Scudo L Ducato L1-H Ducato L1-H2 T* Ducato L2-H Ducato L2-H2 T* Ducato L3-H2 T* Ducato L3-H3 T* Ducato L4-H2 T* * Ducato L4-H3 T* * * with overhang T* Design with high roof lined over entire height Ford Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Transit Courier Transit Connect L Transit Connect L Transit Custom L Transit Custom L Transit FWD / RWD L2-H Transit FWD / RWD L2-H Transit FWD / RWD L3-H Transit FWD / RWD L3-H Transit RWD L4-H * * with overhang T* Design with high roof lined over entire height Express delivery available 42

43 bott vario Side lining panels vario protect-light in-vehicle lining Hyundai Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door H350 L H350 L Iveco Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Daily L1-H Daily L2-H Daily L2-H Daily L3-H2-H L* Daily L4-H2-H Daily L5-H2-H L* * with overhang Mercedes-Benz Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Citan compact Citan long Citan extra long Vito compact Vito long Vito extra long Sprinter L1-H Crafter L1-H2 T* Sprinter L2-H Sprinter L2-H2-H3 T* Sprinter L3-H2-H3 T* Sprinter L4-H2-H3 T* * * with overhang T* Design with high roof lined over entire height bott vario 43

44 bott vario Side lining panels Express delivery available vario protect-light in-vehicle lining Nissan Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door NV ** Primastar L1-H Primastar L2-H NV 400 L1-FWD-H NV 400 L1-FWD-H2 T* NV 400 L2-FWD-H2-H3 T* NV 400 L3-FWD-H2-H3 T* NV 400 L3-RWD-H2-H3 T* NV 400 L4-RWD-H2-H3 T* T* Design with high roof lined over entire height ** also for versions with 2 sliding doors Opel Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Combo L1-H Combo L2-H Combo L1-H Combo L2-H Vivaro L1-H Vivaro L2-H Movano L1-FWD-H Movano L1-FWD-H2 T* Movano L2-FWD-H2-H3 T* Movano L3-FWD-H2-H3 T* Movano L3-RWD-H2-H3 T* Movano L4-RWD-H2-H3 T* T* Design with high roof lined over entire height Express delivery available 44

45 bott vario Side lining panels vario protect-light in-vehicle lining Peugeot Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Bipper Partner Partner long Expert L1-H Expert L2-H1-H Boxer L1-H Boxer L1-H2 T* Boxer L2-H Boxer L2-H2 T* Boxer L3-H2 T* Boxer L3-H3 T* Boxer L4-H2 T* * Boxer L4-H3 T* * * with overhang T* Design with high roof lined over entire height Renault Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Kangoo Compact Kangoo Kangoo Maxi Trafic L1-H Trafic L2-H Master L1-FWD-H Master L1-FWD-H2 T* Master L2-FWD-H2-H3 T* Master L3-FWD-H2-H3 T* Master L3-RWD-H2-H3 T* Master L4-RWD-H2-H3 T* T* Design with high roof lined over entire height bott vario 45

46 bott vario Side lining panels Express delivery available vario protect-light in-vehicle lining Toyota Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Proace L1-H1-H Proace L2-H1-H Volkswagen Build year from Wheelbase mm [ 1 ] Basic set Side lining panels [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Caddy Caddy Maxi T6 L1-H1-H T6 L2-H1-H T6 L2-H Crafter L1-H Crafter L1-H2 T* Crafter L2-H Crafter L2-H2-H3 T* Crafter L3-H2-H3 T* Crafter L4-H2-H3 T* * * with overhang T* Design with high roof lined over entire height Express delivery available 46

47 bott vario Side lining panels bott vario additional lining sets vario protect plus aluminium lining sets vario protect cargo wood composite lining sets 47

48 bott vario Side lining panels Express delivery available vario protect-light interior side lining for vehicles with 2 sliding doors Side lining panels + 2 sliding door panel + 3 = rear door set Complete set with rear and sliding door 1 Side lining panels + 2 sliding door panel + 4 = Tailgate set Complete set with tailgate and sliding door = Side lining panels sliding door panel Rear doors Tailgate set Complete set with tailgate, sliding door and rear doors Express delivery available 48

49 bott vario Side lining panels vario protect-light side lining for vehicles with 2 sliding doors Build year from Wheelbase mm [ ] complete set Rear doors + Sliding door [ ] complete set Tailgate + Sliding door Citroën Jumper / Fiat Ducato / Peugeot Boxer L1-H Citroën Jumper / Fiat Ducato / Peugeot Boxer L2-H Citroën Jumper / Fiat Ducato / Peugeot Boxer L2-H Citroën Jumper / Fiat Ducato / Peugeot Boxer L3-H Citroën Jumper L4-H2 / Fiat Ducato L5-H2 / Peugeot Boxer L4-H * Dacia Dokker Ford Courier Ford Transit Connect L Ford Transit Connect L Ford Transit FWD / RWD L2-H Ford Transit FWD / RWD L2-H Ford Transit FWD / RWD L3-H Ford Transit FWD / RWD L3-H Hyundai H Iveco Daily L1-H Iveco Daily L2-H Iveco Daily L2-H Iveco Daily L3-H2-H L Iveco Daily L4-H2-H Iveco Daily L5-H2-H L Mercedes-Benz Vito L Mercedes-Benz Vito L Mercedes-Benz Vito L Nissan NV Nissan NV400 L1-H1 FWD/Opel Movano/Renault Master Nissan NV400 L1-H1 FWD/Opel Movano/Renault Master Nissan NV400 L2-H2 FWD/Opel Movano/Renault Master Nissan NV400 L3-H2 FA/Opel Movano/Renault Master Nissan NV400 L3-H2 RWD/Opel Movano/Renault Master Nissan NV400 L4-H2 RWD/Opel Movano/Renault Master VW Caddy Maxi VW T6 short H1-H VW T6 long H1-H bott vario 49

50 bott Tainer Containers for flatbed vehicles Storage space organisation and load restraint on open loading areas 50

51 botttainer Containers for flatbed vehicles Order and convenience Stability High stability thanks to robust frame construction Hard-wearing surfaces: Sides and floors in galvanised sheet steel Body with edge protection profiles Optimal use of available space achieved using vario system components Drawer dividers for the organised storage of small parts Quick access to the most important equipment via side doors, roller shutters and internal drawers, without climbing onto the bed bott vario Protection and security Versatility Versatile versions with aluminium chequer plate lid or aluminium roller shutter Various storage space layouts and configurations Individual configuration also possible as alternative to package versions Easy securing of loads on the loading bed High weather and splash protection for tools and materials Theft protection for cargo through two-point locking mechanism Adjustable feet guarantee protection against floor dampness 51

52 botttainer Containers for flatbed vehicles botttainer For organising storage space and securing loads on flatbeds Systematic arrangement and securing of loads on the flatbed using subdivided storage compartments Quicker and more ergonomic access to the most important equipment via side doors, roller shutters, internal drawers without climbing onto the loading bed (depending on design) High stability thanks to robust frame construction Hard-wearing surfaces: Sides and floors in galvanised sheet steel, body with edge protection profiles. Tools and materials are splash-proof thanks to seals Theft protection for transport goods thanks to robust locks Raised feet guarantee protection from standing moisture Optimal use of available space achieved using vario system components Crash test verified pursuant to ECE R44 Individual configuration also possible as alternative to package versions 52

53 botttainer Containers for flatbed vehicles bott tainer with hinged lid Cover made of slip-resistant aluminium chequer plate Gas strut for securely keeping the cover open Secure safekeeping of transported goods via dual-interlock with robust locks External dimensions Internal dimensions Load capacity kg Weight kg 1750 x 650 x x 545 x M 1930 x 650 x x 545 x M botttainer with hinged lid and removable shelf Cover made of slip-resistant aluminium chequer plate Equipped with 2-piece, removable shelf Gas strut for securely keeping the cover open Secure transport goods safekeeping via dual-interlock with robust locks bott vario External dimensions Internal dimensions Load capacity kg Weight kg 1750 x 650 x x 545 x ( ) M 1930 x 650 x x 545 x ( ) M botttainer divider for shelves Divider for positioning above the shelf V 53

54 botttainer Containers for flatbed vehicles botttainer with a door and a hinged lid Cover made of slip-resistant aluminium chequer plate Side access doors available on either or both sides Equipped with 2-piece shelf Gas strut for securely keeping the cover open Secure safekeeping of transported goods via dual-interlock with robust locks External dimensions Internal dimensions Door position Load capacity kg Weight kg 1750 x 650 x x 545 x ( ) Both sides M 1930 x 650 x x 545 x ( ) Both sides M 1750 x 650 x x 545 x ( ) Left or right* M 1930 x 650 x x 545 x ( ) Left or right* M botttainer with doors and removable shelves Cover made of slip-resistant aluminium chequer plate Possible versions: left and right, each with 1 large door or each with 2 doors located one above the other with sturdy locks Firmly secured intermediate shelf Upper doors can also be opened even when the drop sides are up The lower compartment can optionally be equipped with drawers Drawer set* H x D mm Standard duty 40kg 1x 175 x 540 / 1x 300 x M Heavy duty 50kg 1x 175 x 795 / 1x 300 x M External dimensions Version Internal dimensions Load capacity kg Weight kg 1750 x 630 x doors 1610 x 545 x ( ) M 1930 x 630 x doors 1790 x 545 x ( ) M 1750 x 630 x doors 1610 x 545 x ( ) M 1930 x 630 x doors 1790 x 545 x ( ) M 54

55 botttainer Containers for flatbed vehicles botttainer available configurations behind hinged doors Kitted with * Drawer front height mm Load capacity kg Depth mm 1 drawer 1 x 300 mm M M 2 drawers plusproduct 1 x 125 / 1 x 175 mm M M 3 drawers 3 x 100 mm M M 1 variosort, 1 variosafe height L M * Drawer position (left or right) must be specified when placing an order. (A botttainer with width 1,750 mm allows a maximum combination of 1 x system depth 795 mm and 1 x system depth 540 mm). plus Delivery incl. perfo panel and hook kit botttainer divider for shelves Divider for positioning above the shelf V bott vario 55

56 botttainer Containers for flatbed vehicles botttainer with hinged lid for pick-ups Compact transport box for all conventional pick-up models Cover made of slip-resistant aluminium chequer plate Gas strut for securely keeping the cover open Secure safekeeping of transported goods thanks to robust lock External dimensions Internal dimensions Load capacity kg Weight kg 1030 x 650 x x 545 x M botttainer with roller shutters Weatherproof and lockable roller shutter made of robust aluminium Quick access to the complete usable volume plus Delivery incl. perfo panel and hook kit A B Illust. Configuration A 1365 x 710 x drawers, 2 trays, BottBoxen sliding shelves with bottboxen M B 1365 x 710 x drawers, drop-front shelves, BottBoxen sliding shelves with bottboxen plusproduct M 1365 x 710 x 1060 bottboxen sliding shelves with bottboxes M 1365 x 710 x 910 unkitted M 1365 x 710 x 910 drop-front shelves, bottboxen sliding shelves with bottboxen M 56

57 botttainer Containers for flatbed vehicles botttainer crane eyes 4 crane eyes for quick mobile transport Powder-coated Colour: jet black (RAL 9005) Fixings included botttainer forklift base Forklift base for quick mobile transport Galvanised Includes fixing kit For botttainer D x H mm with cover 650 x M with shutter 710 x M bott vario botttainer top tray Top tray for hanging in the botttainer Fixing in place over the lid Galvanised Optional 13 small part storage box kit For botttainer D x H mm Top trays 341 x 583 x Divider kit with 13 small parts storage boxes 325 x

58 botttainer Containers for flatbed vehicles bott flatbed storage compartment For mounting on the flatbed for fast and easy load securing For transporting shovels, brooms and other tools Width is adjustable from mm, thus suitable for almost all flatbeds Robust construction made of weather-resistant aluminium chequer plate is closed at the ends when the drop sides are up. External dimensions x 622 x V Fixing kit

59 botttainer Load-restraint blanket for flatbed vehicles Load-restraint blanket for flatbed vehicles For securing the load on the flatbed Especially well suited for loose or shapeless cargo Anti-theft protection thanks to the opaque fabric Tested according to VDI 2700 Load capacity up to 200 dan Colour: anthracite grey 4 blanket sizes for all common flatbed sizes Incl. lashing eyes for the drop sides Flatbed length Size / version S V M V L V XL V bott vario 59

60 bott vario Boot floor insert variocar boot floor inserts with lashing rails Plastic panel includes 2 lashing rails and 2 lashing straps with fitting and cam buckle Colour: black Strap length 2500 mm Fixed end of lashing strap 130 mm Attachment via 4 looped straps with cam buckle at lashing points in vehicle Build year Weight kg Audi A4 Avant from 06/ V BMW 3-Series Touring from 09/ V Ford C-Max from 05/ V Ford S-Max from 09/ V Ford Focus estate from 02/ V Mercedes Benz E-Class estate from 08/ V Opel Astra Sports Tourer from 11/ V Opel Insignia Sports Tourer from 04/ V Opel Zafira Tourer from 01/ V Renault Mégane Tourer from 06/ V Seat Alhambra from 10/ V Skoda Oktavia from 04/ V Volkswagen Caddy estate from 02/ V Volkswagen Golf estate from 04/ V Volkswagen Passat estate plusproduct from 10/ V Volkswagen Sharan from 09/ V Volkswagen Tiguan from 11/ V plus Delivery incl. perfo panel and hook kit 60

61 bott vario Base shelf infill variocar retaining rail for 4 variosafes on boot floor insert For mounting on boot floor insert Painted steel Colour: anthracite grey (RAL 7016) Includes 2 x fitting for rapid change of centre rail category 1: Audi A4 Avant, Ford S-Max, Ford Focus estate, Mercedes Benz C-Class estate, Mercedes Benz E-Class T-Model, Opel Astra Sports Tourer, Opel Insignia Sports Tourer, Seat Alhambra, Seat Exeo ST, VW Caddy estate, VW Golf estate, VW Passat estate, VW Sharan, VW Touran category 2: BMW Series-3 Touring, Opel Zafira, Renault Mégane Tourer, VW Tiguan Description System depth mm Matching vehicles Retaining rails for 4x variosafe 340 Group 1 60 x 890 x V Retaining rails for 4x variosafe 340 Group 2 60 x 780 x V variocar retaining rail for 1 variosafe on boot floor insert For mounting on boot floor insert Painted steel Colour: anthracite grey (RAL 7016) Description Matching vehicles Retaining rail for 1x variosafe, system depth 340 mm all types 29 x 331 x 22, V bott vario 61

62 bott vario Modules profit from experience pre-configured modules for every sector 62

63 bott vario Modules The modularity of the bott vario line makes it wonderfully suited to configuring in vehicle equipment exactly according to individual needs. Standardised modules represent a quick and convenient alternative to order-based planning. They pool the experiences of bott planners and offer solutions for all industries and applications, as the selection of modules shows. bott vario Driver's side Passenger's side 63

64 bott vario Category I modules for small vans Standard modules for small vans Model manufacturer Wheelbase mm Build year from 525 mm 775 mm 1025 mm M 231 T 331 T 341 M 331 M 341 T 431 T 432 T 441 Citroën Nemo Berlingo L 2008 Dacia Fiat Dokker Express Fiorino Ford Mercedes- Benz Opel Doblo Transit Courier Transit Connect Transit Connect Citan Compact Citan long Citan Extra long Combo Peugeot Bipper Renault Partner Kangoo Compact L Kangoo Kangoo Maxi Volkswagen Caddy Caddy Maxi Module suitable for use on the driver's side Module suitable for use on the passenger's side 64

65 bott vario Category I modules for small vans 1025 mm 1025 mm 1275 mm1275 mm 1525 mm1525 mm M 432 M 441 M 443 T 531 T 532 T 541 M 531 M 541 M 542 T 631 T 641 bott vario passende Matching Fahrzeuge vehicles Citroën Nemo Berlingo Dacia Dokker Fiat Fiorino Doblo Ford Transit Courier TransitConnect Mercedes-Benz Citan Opel Combo Peugeot Bipper Partner Renault Kangoo Volkswagen Caddy 65

66 bott vario Category II modules for medium vans manufacturer Standard modules for medium vans Model Wheelbase mm Build year from 1025 mm 1275 mm T 431 T 441 M 432 M 441 M 443 R 443 R 442 T 531 Citroën Fiat Ford Jumpy Scudo Transit Custom Hyundai H Iveco Mercedes- Benz Daily Vito L L 2014 Nissan Primastar NV Opel Peugeot Renault Toyota Volkswagen Vivaro Expert Trafic Proace T *front wheel drive + rear wheel drive Module suitable for use on the driver's side Module suitable for use on the passenger's side 66

67 bott vario Category II modules for medium vans M mm 1525 mm 1775 mm 2025 mm 2275 mm T 541 M 541 R 541 T 631 T 641 M 641 M 643 L 734 L 741 L 733 L 832 L 841 L 941 bott vario passende Matching Fahrzeuge vehicles Citroën Jumpy Fiat Scudo Ford Transit Custom Hyundai H1 Iveco Daily Mercedes-Benz Vito Nissan Primastar NV 200 Opel Vivaro Peugeot Expert Renault Trafic Volkswagen T5 67

68 bott vario Category III modules for large vans Standard modules for large vans Model manufacturer Wheelbase mm Build year from 1025 mm 1275 m T 441 M 432 M 441 M 443 T 531 T 541 M 541 M 542 Citroën Fiat Jumper Ducato Ford Transit* Hyundai H H Iveco Daily Mercedes- Benz Sprinter Nissan NV 400 L1 FWD NV 400 L2 FWD NV 400 L3 FA NV 400 L3 RWD Opel Peugeot Renault Volkswagen Movano L1 FWD Movano L2 FA Movano L3 FA Movano L3 RWD Boxer Master L1 FWD Master L2 FA Master L3 FA Master L3 RWD Crafter *front wheel drive + rear wheel drive Module suitable for use on the driver's side Module suitable for use on the passenger's side 68

69 bott vario Category III modules for large vans 1525 mm 2025 mm 2275 mm R 541 R 542 T 631 T 641 M 641 M 643 R 641 L 832 L 841 L 941 L 943 bott vario passende Matching Fahrzeuge vehicles Citroën Jumper Fiat Ducato Ford Transit Hyundai H350 Iveco Daily Mercedes-Benz Sprinter Nissan NV 400 Opel Movano Peugeot Boxer Renault Master Volkswagen Crafter 69

70 bott vario Modules Module T 331 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and divider 1x box shelf with 3 pull-out bottboxes 1x shelf with anti-slip mat and divider Weight kg 775 x 340/240 x M Installation kit V Module T 341 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and divider 1x box shelf with 3 pull-out bottboxes 1x shelf with anti-slip mat and divider Weight kg 775 x 440/340 x M Installation kit V 70

71 bott vario Modules Module T 431 Category I + II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and divider 1x box shelf with 4 pull-out bottboxes 1x shelf with anti-slip mat and divider Weight kg 1025 x 340 x M Installation kit V Module T 432 Category I + II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and divider 1x box shelf with 4 pull-out bottboxes 1x shelf with anti-slip mat and divider bott vario Weight kg 1025 x 340/240 x M Installation kit V 71

72 bott vario Modules Module T 441 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and divider 1x box shelf with 4 pull-out bottboxes 1x shelf with anti-slip mat and divider Weight kg 1025 x 440 x M Installation kit V Module T 531 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 2 dividers 1x box shelf with 5 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 340 x M Installation kit V 72

73 bott vario Modules Module T 532 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 2 dividers 1x box shelf with 5 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 340/240 x M Installation kit V Module T 541 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 2 dividers 1x box shelf with 5 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers bott vario Weight kg 1275 x 440 x M Installation kit V 73

74 bott vario Modules Module T 631 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 2 dividers 1x box shelf with 6 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1525 x 340 x M Installation kit V Module T 641 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 2 dividers 1x box shelf with 6 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1525 x 440 x M Installation kit V 74

75 bott vario Modules bott vario 75

76 bott vario Modules Module M 231 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 1 divider 1x pull-out/removable variosafe, height 190 mm 1x shelf with anti-slip mat and 1 divider Weight kg 525 x 340/240 x M Installation kit V Module M 331 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 2x drawer with anti-slip mat, height 125, 200 mm 2x variosort removable with 15 small parts boxes each 1x shelf with anti-slip mat and 1 divider Weight kg 775 x 340/240 x M Installation kit V 76

77 bott vario Modules Module M 341 Category I + II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 2x drawer with anti-slip mat, height 150, 200 mm 1x variosort case shelf, variosort with 20 small parts boxes 1x shelf with anti-slip mat and 1 divider Weight kg 775 x 440/340 x M Installation kit V Module M 432 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-frontand lashing rail 2x drawer with anti-slip mat, height 100, 200 mm 1x drop-front shelf with drop-front, height 125 mm 1x shelf with anti-slip mat and 1 divider bott vario Weight kg 1025 x 340 x 1000 plusproduct M Installation kit V plus Delivery incl. perfo panel and hook kit 77

78 bott vario Modules Module M 441 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and 1 divider 2x drawer with anti-slip mat, height 125 mm 1x shelf with anti-slip mat and 1 divider Weight kg 1025 x 440 x M Installation kit V Module M 443 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 1x variocart pull-out/removable 1x variosafe pull-out/removable, height 190 mm 1x variosort pull-out/removable with 20 small parts storage boxes 1x box shelf with 4 pull-out bottboxes 1x shelf with anti-slip mat and 1 divider Weight kg 1025 x 440/340 x M Installation kit V 78

79 bott vario Modules Module M 531 Category I Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 1x variosort pull-out/removable with 20 small parts boxes 1x variosafe pull-out/removable, height 125 mm 1x drawer with anti-slip mat, height 125 mm 1x box shelf with 5 pull-out bottboxes 1x drop-front shelf with drop-front, height 125 mm 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 340/240 x M Installation kit V bott vario 79

80 bott vario Modules Module M 541 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 1x drawer with anti-slip mat, height 175 mm 2x variosort pull-out/removable with 20 small parts storage boxes 1x box shelf with 5 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 440 x M Installation kit V Module M 542 Category I + II + III Module specification: Endframes with edge protection 1x base compartment with drop-front 1x drawer with anti-slip mat, height 200 mm 1x variocase, height 134 mm with dividers and cross dividers on a sliding shelf 1x variocase, height 83 mm, with 21 small parts storage boxes on a sliding shelf 2x box shelf with 3 bottboxes 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 440 x M Installation kit V 80

81 bott vario Modules Module M 641 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 3x drawer with anti-slip mat, height 150, 150, 200 mm 1x variosafe pull-out; height 190 mm 1x variocase height 83 mm with 21 small parts boxes, on a sliding shelf 1x variocase height 134 mm, with dividers and cross dividers on a sliding shelf 1x shelf with anti-slip mat with 2 dividers Weight kg 1525 x 440 x M Installation kit V Module M 643 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-frontand lashing rail 1x shelf with anti-slip mat and 1 divider 1x box shelf with lashing rail includes cam buckle strap 2x variosafe pull-out/removable, height 115, 190 mm 1x box shelf with 6 pull-out bottboxes 1x shelf with anti-slip mat and 2 dividers bott vario Weight kg 1525 x 440/340 x 1100 plusproduct M Installation kit V plus Delivery incl. perfo panel and hook kit 81

82 bott vario Modules Module R 442 Category II Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 3x drawer with anti-slip mat, height 100, 150, 200 mm, access from the sliding door 2x variosort removable with 20 small parts boxes 1x shelf with anti-slip mat and 1 divider Weight kg 1025 x 440 x M Installation kit V Module R 443 Category II Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 3x drawer with anti-slip mat, height 100, 150, 200 mm, access from the sliding door 1x variosort pull-out/removable, height 190 mm 1x variosort pull-out/removable with 20 small parts boxes 1x drawer with anti-slip mat, height 200 mm 1x shelf with anti-slip mat and 1 divider Weight kg 1025 x 440 x M Installation kit V 82

83 bott vario Modules Module R 541 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 3x drawer with anti-slip mat, height 100, 150, 200 mm, access from the sliding door 1x variosort pull-out/removable, height 190 mm 1x variosort pull-out/removable with 20 small parts boxes 1x drawer with anti-slip mat, height 200 mm 1x shelf with anti-slip mat and 2 dividers Weight kg 1275 x 440 x M Installation kit V Module R 542 Category III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 3x drawer with anti-slip mat, height 100, 150, 200 mm access via sliding door 1x variocase, height 83 mm, with 21 small parts storage boxes on a sliding shelf 1x variocase, height 83 mm, with dividers on a sliding shelf 1x drawer with anti-slip mat, height 225 mm 1x shelf with anti-slip mat and 2 dividers bott vario Weight kg 1275 x 440 x 1100 plusproduct M Installation kit V plus Delivery incl. perfo panel and hook kit 83

84 bott vario Modules Module R 641 Category III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 3x drawer with anti-slip mat, height 100, 150, 200 mm, access from the sliding door 1x shelf with anti-slip mat and 1 divider 2x drawer with anti-slip mat, height 125, 150 mm 1x shelf with anti-slip mat and 2 dividers Weight kg 1525 x 440 x M Installation kit V Module L 733 Category II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x drop-front shelf with drop-front, height 200 mm 1x box shelf with 4 pull-out bottboxes 1x load restraint set includes cam buckle strap 2x drawer with anti-slip mat, height 100, 150mm 1x drop-front shelf with drop-front, height 125 mm 1x shelf with anti-slip mat and 3 dividers Weight kg 1775 x 340 x M Installation kit V 84

85 bott vario Modules Module L 734 Category II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 3x shelf with anti-slip mat and 2 dividers 1x box shelf with 5 pull-out bottboxes 1x base compartment includes cam buckle strap 2x variosafe pull-out/removable, height 115, 190 mm 1x variosort pull-out/removable with 20 small parts boxes 2x shelf with anti-slip mat and 1 divider Weight kg 1775 x 340/240 x M Installation kit V Module L 741 Category II Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x Eurobox shelf with 3 Euroboxes 1x drop-front shelf with drop-front, height 200 mm 3x shelf with anti-slip mat and 1 divider 1x load restraint kit incl. cam buckle strap 2x box shelf with 3 pull-out bottboxes bott vario Weight kg 1775 x 440/340 x M Installation kit V 85

86 bott vario Modules Module L 832 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and 2 lashing rails 2x variosafe pull-out/removable, height 190 mm 2x variosort pull-out/removable with 20 small parts boxes 2x box shelf with 4 pull-out bottboxes 2x shelf with anti-slip mat and 1 divider 1x load restraint kit incl. cam buckle strap 1x drop-front shelf with drop-front, height 200 mm plus Delivery incl. perfo panel and hook kit Weight kg 2025 x 340/240 x 1100 plusproduct M Installation kit V Module L 841 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x Eurobox shelf with 3 Euroboxes 1x drop-front shelf with drop-front, height 125 mm 2x shelf with anti-slip mat and 1 divider 1x load restraint kit incl. restraint 2x box shelf with 4 pull-out bottboxes 1x Long-item top tray with side drop-front Weight kg 2025 x 440/340 x M Installation kit V 86

87 bott vario Modules Module L 941 Category II + III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 1x shelf with anti-slip mat and two dividers 2x box shelf with 5 bottboxes 1x load restraint kit incl. cam buckle strap 1x Eurobox shelf with 3 Euroboxes 1x shelf with anti-slip mat and 1 divider 1x drop-front shelf with drop-front, height 125 mm 1x long-item top tray with side drop-front Weight kg 2275 x 440/340 x M Installation kit V Module L 943 Category III Module specification: Endframes with edge protection 1x base compartment with drop-front and lashing rail 3x shelf with anti-slip mat and 2 dividers 1x box shelf with 5 bottboxes 1x load restraint kit incl. cam buckle strap 1x drop-front shelf with drop-front, height 200 mm 1x Eurobox tray with 3 Euroboxes 1x box shelf with 4 bottboxes 1x shelf with anti-slip mat and 1 divider plus bott vario Delivery incl. perfo panel and hook kit Weight kg 2275 x 440/340 x 1400 plusproduct M Installation kit V 87

88 bott vario Under-floor modules storage space organisation on 2 levels quick access to tools and materials generous space for large transported goods 88

89 bott vario Under-floor modules bott vario Lower level Convenient access to tools and materials via rear and side doors Drawers in 2 heights with high load capacity and side stability Clear organisation thanks to versatile drawer dividers Holds variosafe carry boxes for mobility at construction sites Space utilisation precisely adapted to the vehicle contour 100% full extension slides, 50 kg load capacity Upper level Space for large transported goods Sturdy floor panel with anti-slip surface High load bearing capacity (vehicle payload less the weight of the module) Integrated lashing eyes Ability to add bott vario modules, load-securing rails and heavy duty slides 89

90 bott vario Under-floor modules Bott vario underfloor modules in 2 construction heights (incl. pre-profiled flooring height) 210 mm 360 mm Free cargo area Theft protection, since the stored material is not visible from the outside Easy access via sliding and rear door Large storage space volume, lashing eyes on the raised floor panel Drawers with full extension slides Load capacity per drawer: 50 kg Info Please refer to page 268 onwards for matching dividers and cross dividers Citroën For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Nemo x 150 1x V Berlingo x 150 1x V Berlingo Maxi x 150 1x V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). Dacia For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Dokker x150 1x V 90

91 bott vario Under-floor modules Fiat For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Fiorino x 150 1x V Doblò* x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V 360 2x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V Doblò Maxi* x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V 360 2x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). *In vehicles with tailgate, the under-floor module must be propped up. Ford For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Transit Courier x 150 1x V Transit Connect x 150 1x V 360 2x 300 1x V 360 2x 300 2x V bott vario x 150 1x 300 2x 150 1x 300 1x V 2x V 360 4x 150 2x V Transit Connect x 150 1x V 360 4x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V 360 2x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). 91

92 bott vario underfloor modules Mercedes-Benz For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Citan x V Citan x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V 360 2x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V Citan x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V 360 2x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). Opel For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Combo* x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). *In vehicles with tailgate, the under-floor module must be propped up x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V Combo* x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V 360 2x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V 92

93 bott vario underfloor modules Peugeot For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Bipper x 150 1x V Partner x 150 1x V Partner Maxi x 150 1x V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). bott vario 93

94 bott vario Under-floor modules Renault For vehicle Build year from Wheelbase mm Construction heightmm Quantity of drawers, rear mm Quantity of drawers, side mm Kangoo x V Kangoo L x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V 360 2x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V Kangoo L x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V 360 2x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V In vehicles with different bulkhead configurations, the flooring panel must be cut to size during installation (cutting edge is marked). Volkswagen For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm Quantity of drawers, side mm Caddy x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V 360 2x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V Caddy Maxi x 150 1x V 360 2x 300 1x V 360 2x 300 2x V 360 2x 150 1x 300 1x V 360 2x 150 1x 300 2x V 360 4x 150 1x V 360 4x 150 2x V Caddy Life x V Caddy Maxi Life x V Caddy Maxi Life x V 1 with 2 lashing rails integrated in the drop-front shelf, variocar can also be installed, 2 for vehicles with factory-fitted VW bulkhead 94

95 bott vario Under-floor modules Volkswagen A long parts compartment with drop-front is located between the under-floor modules A hardtop must be in place over the loading surface, as the components are not weather-resistant. Includes anti-slip mat for drawers For vehicle Build year from Wheelbase mm Construction height mm Quantity of drawers, rear mm VW Amarok crew cab with hardtop x V 360 2x V VW Amarok crew cab with hardtop x x V 360 2x x V bott vario 95

96 bott vario In practice 96

97 bott vario Reference examples For vehicle occupants, putting on the safety belt is a matter of course. Every driver knows that being secured firmly to the vehicle is essential for safety. But what about the cargo behind the passengers? bott vario Even with minor evasive manoeuvres, slipping loads can impair the driving precision of the vehicle as well as the concentration of the driver. For this reason, load restraint is one of the most important tasks fulfilled by in-vehicle equipment. 97

98 bott Load restraint in practice 98

99 bott vario Reference examples bott vario Whether large and bulky, high and narrow, or thin and long bott vario offers the correct solution for safely securing any load or material for transportation. This way, vehicle owners and loaders, who like drivers must also follow strict legal requirements, are also on the safe side with respect to the law. 99

100 bott vario Heavy duty sliding platforms Heavy duty sliding platforms with 4 lashing eyes Platform locking mechanism engages automatically when closed: secures platform for transit Locks into position when fully open: allows for safe platform loading and unloading Smooth-operating telescopic slides: Easy one-handed operation Max load = 180 kg: high dynamic load capacity With 4 lashing eyes on the corners: secure fixing for tied-down loads System dimensions Actual dimensions approx. W x D mm Slide extension mm Weight kg 525 x 775 x x V 525 x 1040 x x V 525 x 1275 x x V 775 x 775 x x V 775 x 1040 x x V 900 x 900 x x V 1025 x 775 x x V Full extension heavy duty sliding platform 200 kg Multiplex worktop 30 mm 200 kg load capacity Full extension Locks automatically into position when fully extended or fully closed Slide extension mm Weight kg 620 x 1000 x

101 bott vario variopin locking system variopin, the electronic locking system for in-vehicle equipment Access authorisations are easily assigned without keys using a master code and PUK Up to 100 individual programmable 4- to 8-digit PIN codes Power supply via three 1.5 V AA batteries, included with delivery Battery service life up to 5 years Low-battery warning indicator Version for drawer cabinets Opened by entering code No additional unlocking device required Close by pressing the OK button or automatically after 8 hours The automatic closure time can be individually set between 30 seconds and 9 hours using the optional programming device Version for hinged door cupboards Opened by entering code Closed by rotating the lock PreLock function for opening and closing without code entry Info See page 44 for the corresponding programming software for advanced functions bott vario 101

102 bott vario Drawer dividers Small parts storage box kits Removal of individual boxes possible Colour: iron grey (RAL 7011) Height 75 mm For customised division of drawers Rounded corners for easy removal of small parts Cabinet dimensions width 425 x depth 440 mm A B Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes A from 100 mm 75 mm V B from 100 mm 75 mm V Cabinet dimensions width 425 x depth 540 mm rotated drawer version 525 x 440 C D Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes C from 100 mm 75 mm V D from 100 mm 75 mm V 102

103 bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 425 x depth 640 mm E F Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes E from 100 mm 75 mm V F from 100 mm 75 mm V Cabinet dimensions width 425 x depth 795 mm rotated drawer version 775 x 440 G H Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes G from 100 mm 75 mm V H from 100 mm 75 mm V bott vario 103

104 bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 525 x depth 340 mm I J Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes I from 100 mm 75 mm V J from 100 mm 75 mm V Cabinet dimensions width 525 x depth 440 mm K L Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes K from 100 mm 75 mm V L from 100 mm 75 mm V Cabinet dimensions width 525 x depth 540 mm rotated drawer version 540 x 525 M N Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes M from 100 mm 75 mm V N from 100 mm 75 mm V 104

105 bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 525 x depth 640 mm O P Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes O from 100 mm 75 mm V P from 100 mm 75 mm V Cabinet dimensions width 525 x depth 795 mm rotated drawer version 540 x 775 Q R Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes Q from 100 mm 75 mm V R from 100 mm 75 mm V bott vario 105

106 bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 775 x depth 340 mm S T Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes S from 100 mm 75 mm V T from 100 mm 75 mm V Cabinet dimensions width 775 x depth 440 mm U V Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes U from 100 mm 75 mm V V from 100 mm 75 mm V 106

107 bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 775 x depth 540 mm W X Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes W from 100 mm 75 mm V X from 100 mm 75 mm V Cabinet dimensions width 775 x depth 640 mm Y Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes Y from 100 mm 75 mm V bott vario Cabinet dimensions width 775 x depth 795 mm Z Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes Z from 100 mm 75 mm V 107

108 bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 1025 x depth 340 mm A B Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes A from 100 mm 75 mm V B from 100 mm 75 mm V Cabinet dimensions width 1025 x depth 440 mm C D Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes C from 100 mm 75 mm V D from 100 mm 75 mm V Cabinet dimensions width 1025 x depth 540 mm E F Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes E from 100 mm 75 mm V F from 100 mm 75 mm V 108

109 bott vario Drawer dividers Small parts storage box kits Cabinet dimensions width 1025 x depth 640 mm G Quantity of small parts storage boxes mm 50 x x x x x x x x 150 Front height of drawer Height of boxes G from 100 mm 75 mm V Labelling kit, for small parts storage boxes Downloadable label document templates are available free of charge at at Includes 30 label holders Contains 10 DIN A4 sheets, each with 40 label strips V bott vario 109

110 bott vario Drawer dividers Dividers and cross dividers Kits for dividing drawers Natural aluminium Each divider supplied with 2 holders 75 mm high dividers for drawer heights of 100/125 mm 125 mm high dividers for drawer heights of 150mm or above Dividers for longitudinal division of drawers Cabinet depth mm Pack quantity Front height of drawer mm Height of cross dividers mm / V from 150 mm V 100/ V from 150 mm V 100/ V from 150 mm V 100/ V from 150 mm V 100/ V from 150 mm V Dividers for transverse division of drawers Cabinet depth mm Pack quantity Front height of drawer mm Height of cross dividers mm / V from 150 mm V 100/ V from 150 mm V 110

111 bott vario Drawer dividers Cross dividers for customised division of drawers Cross divider width mm Pack quantity Front height of drawer mm Height of cross dividers mm / V from 150 mm V 100/ V from 150 mm V 100/ V from 150 mm V 100/ V from 150 mm V bott vario 111

112 bott vario Drawer dividers Divider and cross-divider kit Cabinet dimensions width 425 mm - rotated cabinet version 440 mm A Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm A / V from 150 mm V Cabinet dimensions width 425 mm rotated cabinet version 440 mm B C D Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm B 540/ C D 795/ / V from 150 mm V 100/ V from 150 mm V 100/ V from 150 mm V 112

113 bott vario Drawer dividers Divider and cross-divider kit Cabinet dimensions width 525 mm E F G Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm E F G / V from 150 mm V 100/ V from 150 mm V 100/ V from 150 mm V Cabinet dimensions width 525 mm - rotated cabinet version 540 mm - suitable for underfloor modules H Cabinet depth mm I Quantity Dividers H 540/ Quantity Cross dividers Front height of drawer mm Height of cross dividers mm 100/ V from 150 mm V bott vario I 795/ / V from 150 mm V 113

114 bott vario Drawer dividers Divider and cross-divider kit Cabinet dimensions width 775 mm J K Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm J K / V from 150 mm V 100/ V from 150 mm V Cabinet dimensions width 775 mm L M N Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm L M N / V from 150 mm V 100/ V from 150 mm V 100/ V from 150 mm V Cabinet dimensions width 1025 mm O P Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm O P / V from 150 mm V 100/ V from 150 mm V 114

115 bott vario Drawer dividers Divider and cross-divider kit Cabinet dimensions width 1025 mm Q R Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm Q R / V from 150 mm V 100/ V from 150 mm V Cabinet dimensions width 1025 mm S T Cabinet depth mm Quantity Dividers S T Quantity Cross dividers Front height of drawer mm Height of cross dividers mm 100/ V from 150 mm V 100/ V from 150 mm V bott vario Cabinet dimensions width 1025 mm U V Cabinet depth mm Quantity Dividers Quantity Cross dividers Front height of drawer mm Height of cross dividers mm U V / V from 150 mm V 100/ V from 150 mm V 115

116 bott vario Drawer dividers Shelf dividers Incl. 2 plastic divider holders per divider Natural aluminium Colour of the divider holder: anthracite grey (RAL 7016) Pack quantity 30 x 240 x V 30 x 340 x V 30 x 440 x V 30 x 540 x V 30 x 640 x V Drop front shelf dividers Incl. 1 plastic divider holder and fixing screw per divider Dividers up to 640 mm deep made of natural aluminium, 795 mm deep dividers made of from sheet steel Colour of the divider holder: anthracite grey (RAL 7016) Pack quantity 30 x 340 x V 30 x 440 x V 30 x 540 x V 30 x 640 x V 30 x 795 x V 116

117 bott vario Drawer dividers Desk panels for drawers For inserting into a drawer with drawer height 100 mm Includes 3 dividers Thickness 12 mm For system width mm For system depth mm 440* V 440* V V V 540* V V V V V *for rotated cabinet Suspended file frame for drawers Powder-coated steel suspended file frame, white aluminium (RAL 9006) For holding file holders DIN A4 Suitable for drawers with drawer height 300 mm Includes fixing material for mounting in drawer Suitable for drawers with system dimensions 525 x 440 mm, rotated drawer 440 x 525 mm bott vario 424 x 336 x V 117

118 bott vario Drawer dividers bott vario foam inlay for manual trimming Clear arrangement of tools Unique definition of storage locations and contents Missing items immediately noticed Cut-outs can be accurately made with the cutter set with a few simple steps Can be adjusted to other drawer sizes by trimming or by using multiple mats Perfect for use in combination with full extension slides Material/colour: Underlay: XPE 33, thickness 5 mm / red insert: PE 30, thickness 22 mm / black Properties: PE 30 laminated, heat-resistant up to 112 C, non-combustible, resistant to oils, petrol and detergents, environmentally friendly Actual dimensions approx. W x D mm Weight kg 525 x 440 x x V 525 x 540 x x V 775 x 440 x x V 775 x 540 x x V 1025 x 440 x x V 1025 x 540 x x V Cutter set for foam inlay with a storage case 3 cutters with protective covers 1x width 20 mm, 1x width 50 mm, 1x semicircular, 20 x 20 x 80 mm Cutter Folding ruler Weight kg 225 x 170 x V 118

119 bott vario Drawer dividers Inserts for drawers Spray can insert,for storing 13 spray cans, max. Ø 73 mm Cartridge insert,for storing 24 cartridges, max. Ø 53 mm Nozzle insert with 4 x 75mm high small parts storage boxes with space for 143 nozzles, max. Ø 22 mm For drawers W x D mm of the insert Aerosol can insert 525 x x 264 x V Cartridge storage insert 525 x x 264 x V Nozzle insert 525 x x 380 x V bott vario 119

120 bott vario Mobile working Folding worktop For working with materials outside of the vehicle Sheet steel, galvanised Cross-laminated beech multiplex worktop with an oiled finish Version with turntable and 125 mm vice 240 x 300 x V with 125 mm vice 220 x 300 x V without vice 155x 300 x V 120

121 bott vario Mobile working Retractable worktop For working with materials outside of the vehicle Sheet steel, galvanised Cross-laminated beech multiplex worktop with an oiled finish System width mm with turntable and 125 mm vice V without vice V with turntable and 125 mm vice V without vice V Slide with vice Vice slide for individual installation Clamping handle for infinately variable clamping of the slide Adjustment 600 mm Cross brace is required. bott vario Version Weight packed 920 x 125 x 110 incl. vice 75 mm V 945 x 125 x 150 incl. vice 100 mm V 945 x 135 x 165 incl. vice 100 mm + turntable V 121

122 122

123 bott vario Mobile workstation Heavy duty folding worktop Heavy duty folding worktop incl. stable support leg for heavy work Folding mechanism supported by 2 gas struts Adjustable working height mm Suitable for all bott vices up to a jaw width of 175 mm (turntable only up to jaw width of 150 mm) plus Delivery incl. perfo panel and hook kit Version 230 x 270 x 1100 Heavy duty worktop V 230 x 270 x 1100 plusproduct with turntable and vice S V Support leg with snap fastener For use with folding and sliding worktops Continuous height adjustment from mm Secured at chosen height with clamping handle Snap fastener bott vario Height mm

124 bott vario Mobile workstation Folding seat with upholstery Powder coated steel Colour: anthracite grey (RAL 7016) Upholstered cushion Height adjustable from mm Automatically folding support leg with gas strut support For mounting on an endframe or a wall mount Height-adjustable in 19 mm increments 300 x 80 x V Folding seat wall mount Powder coated steel Colour: anthracite grey (RAL 7016) Alternative attachment point when an endframe is not available 236 x 85 x V 124

125 bott vario Long-item transportation Long-item top tray Anodised aluminium: low weight with easy-to-clean surface Access gained via latched drop-front Convenient to load and unload without entering the vehicle Height 100 mm W x D mm x V x V x V x V x 300 x V 2060 x 300 x V Anti-slip mat for long-item top tray Mat thickness = 3 mm bott vario W x D mm 2595 x V 2595 x V 3845 x V 3845 x V 2035 x V 5295 x V 125

126 bott vario Long-item transportation Wall bracket for long-item top tray Used to secure long-item top tray to partition or side wall Powder coated steel Colour: anthracite grey (RAL 7016) Continuous angle adjustment from x 225 x V 126

127 bott vario Gas cylinder transportation Gas cylinder restraint system with lashing strap Provides a safe means of transporting up to 2 gas cylinders Strap length 1000 mm Load capacity up to 500 dan Design 1: with 1 retaining rail and 1 ratchet strap Design 2: with 2 retaining rails and 2 ratchet straps For system depth mm Version Rail length mm V V V V V V Gas bottle cabinet with ventilation For storing and safely transporting compressed gasses Housing: Powder-coated sheet steel Colour: anthracite grey (RAL 7016) Door made of anodised aluminium Supplied with vent for floor mounting Enclosed cabinet with rubber door seal Lockable bott vario 525 x 440 x V 127

128 bott vario Gas cylinder transportation Vertical refrigerant shelf For storing refrigerant bottles Includes 1 anodised aluminium storage shelf and anti-slip mat Endframes: Powder-coated sheet steel Colour: anthracite grey (RAL 7016) Bottles are secured with ratchet straps System dimensions Quantity Straps 850 x 340 x M 1025 x 340 x M 1100 x 340 x M 1275 x 340 x M 128

129 bott vario Ventilation Roof- or side-mounted vent Provides roof or side ventilation when transporting compressed gases Plastic: black Requires 76 x 216 mm cut-out Low-profile design means vehicle can still be cleaned in a car-wash 205 x 355 x V bott vario 129

130 bott vario Ventilation Floor-mounted vent square Provides floor ventilation when transporting compressed gas cylinders Sheet steel, galvanised With duct and water deflection plate Requires 130 x 130 mm cut-out 164 x 164 x Floor-mounted vent rectangular Provides floor ventilation when transporting compressed gas cylinders Stainless-steel vent grille With duct and water deflection plate Requires 250 x 72 mm cut-out 280 x 122 x

131 bott vario Window grilles Window grilles for sliding doors, tailgates and rear doors Protects against theft from vehicle Protects vehicle from possible damage from loaded goods Powder coated steel Colour: anthracite grey (RAL 7016) Grille spacing 25 mm Rear door design includes both left and right sides Additional variations available upon request type Build year from For door type: Citroën Jumper, Fiat Ducato, Peugeot Boxer 2006 Rear doors V Citroën Jumper, Fiat Ducato, Peugeot Boxer L Sliding door V Citroën Jumper L2-L4, Fiat Ducato L2-L4, Peugeot Boxer L2-L Sliding door V Fiat Doblo, Opel Combo H Rear doors V Ford Transit Courier L Rear doors V Ford Transit Courier L Right sliding door V Ford Transit Courier L Left sliding door V Ford Transit Courier L Left side window V Ford Transit Custom H Rear doors V Ford Transit Custom 2012 Right sliding door V Ford Transit Custom 2012 Left sliding door V Ford Transit Connect 2014 Rear doors V Ford Transit Connect L Right sliding door V Ford Transit Connect L Left sliding door V Ford Transit Connect L Right sliding door V Ford Transit Connect L Left sliding door V Ford Transit 2014 Rear doors V Ford Transit 2014 Right sliding door V Ford Transit 2014 Left sliding door V Iveco Daily L2-L Rear doors V Iveco Daily L2-L Right sliding door V Iveco Daily L2-L Left sliding door V Mercedes-Benz Vito 2014 Rear doors V Mercedes-Benz Vito 2014 Tailgate V Mercedes-Benz Vito 2014 Right sliding door V Mercedes-Benz Vito 2014 Left sliding door V Mercedes-Benz Sprinter, Volkswagen Crafter 2006 Rear doors V Mercedes-Benz Sprinter, Volkswagen Crafter L Sliding door V Mercedes-Benz Sprinter, Volkswagen Crafter L2-L Sliding door V Nissan Primastar, Opel Vivaro, Renault Trafic 2014 Rear doors V Nissan Primastar, Opel Vivaro, Renault Trafic 2014 Tailgate V Opel Vivaro, Renault Trafic 2014 Right sliding door V Opel Vivaro, Renault Trafic 2014 Left sliding door V Nissan NV400, Opel Movano, Renault Master 2010 Rear doors V Nissan NV400, Opel Movano, Renault Master L Sliding door V Nissan NV400, Opel Movano, Renault Master L2-L Sliding door V bott vario 131

132 bott vario Window grilles Window grilles for sliding doors, tailgates and rear doors Volkswagen type Build year from For door type: Volkswagen Caddy, Volkswagen Caddy Maxi 2015 Rear doors V Volkswagen Caddy, Volkswagen Caddy Maxi 2015 Tailgate V Volkswagen T Rear doors V Volkswagen T Tailgate V Volkswagen T Sliding door V Window grilles for the vehicle bulkhead For protecting driver and passenger Powder coated steel Colour: anthracite grey (RAL 7016) Grille spacing 25 mm type Build year from Citroën Jumpy, Fiat Scudo, Peugeot Expert V Citroën Jumper, Fiat Ducato, Peugeot Boxer V Fiat Doblo, Opel Combo V Ford Transit Connect V Nissan Primastar, Opel Vivaro, Renault Trafic V Nissan NV V Nissan NV 400, Opel Movano, Renault Master V Mercedes-Benz Vito V Mercedes-Benz Sprinter, Volkswagen Crafter V Volkswagen Caddy, Volkswagen Caddy Maxi V Volkswagen T V 132

133 bott vario Ladungssicherung bott vario Load-restraint bulkhead for securing loads in vehicles without a factory fitted bulkhead bott vario 133

134 bott vario Load-restraint bulkhead Load-restraint bulkhead For securing loads in vehicles without a factory fitted bulkhead Secured with two included ratchet straps with hooks The load-restraint bulkhead can be width-adjusted depending on the vehicle type Incl. anti-slip mat optional load-securing net made of strap W 1440 x D 1300 mm Load capacity up to 300 dan 4x hook, 4x cam buckle Adjustable for every vehicle type Description Load-restraint bulkhead x 500 x V Load-securing net

135 bott vario Load restraint perfo panel for vehicle bulkhead Creates an even, vertical surface on the vehicle bulkhead Powder coated steel Colour: anthracite grey (RAL 7016) Perforated for attaching hooks and accessories from the standard perfo accessory range Image shows panel and various accessories (accessories are not included) 1025 x 25 x V Adaptor rail for perfo panel -specific fixing kits for attaching the perfo panel to the vehicle bulkhead. W 1450 x D 40 x H 42 mm Powder coated steel Colour: anthracite grey (RAL 7016) bott vario For vehicle type Build year Ford Transit Custom from V Volkswagen T6 from V Iveco Daily from V Opel Vivaro, Renault Trafic, Nissan Primastar from V Mercedes-Benz Sprinter, Volkswagen Crafter, Hyundai H350 from V Citroën Jumpy, Fiat Scudo, Peugeot Expert, Toyota Proace from V Citroën Jumper, Fiat Ducato, Peugeot Boxer from V Nissan NV200 from V 135

136 bott vario Load restraint Load-securing pad with holder For positioning beneath loaded goods Coefficient of friction in line with VDI guideline 2700 (DEKRA test certificate supplied) Flame resistant (fire class Bfl-S1 in accordance with EN 13501) Anti-slip, dimensionally stable, tear resistant, durable, waterproof, oil and fat resistant, washable up to 60 C Colour: anthracite grey (RAL 7016) Optionally available with anodised aluminium storage pocket (160 x 45 x 160 mm) Pack quantity 6 Version Quantity Pad 152 x 152 x 4.5 incl. holder V 152 x 152 x V Strap protection pads and holder Protect loaded goods from strap abrasion Feed mats onto securing straps using the holes provided Coefficient of friction in line with VDI guideline 2700 (DEKRA test certificate supplied) Flame resistant (fire class Bfl-S1 in accordance with EN 13501) Anti-slip, dimensionally stable, tear resistant, durable, waterproof, oil and fat resistant, washable up to 60 C Colour: anthracite grey (RAL 7016) Optionally available with anodised aluminium storage pocket (160 x 45 x 160 mm) Pack quantity 6 Version Quantity Pad 152 x 152 x 4.5 incl. holder V 152 x 152 x V 136

137 bott vario Load restraint Load-securing mat with holder For supporting loaded goods Coefficient of friction in line with VDI guideline 2700 (DEKRA test certificate supplied) Flame resistant (fire class Bfl-S1 in accordance with EN 13501) Anti-slip, dimensionally stable, tear resistant, durable, waterproof, oil and fat resistant, washable up to 60 C Colour: anthracite grey (RAL 7016) Includes holder (114 x 114 x 500 mm) Version 620 x 820 x 4.5 incl. holder V 620 x 820 x V 1220 x 820 x 4.5 incl. holder V 1220 x 820 x V Lashing rails with anti-abrasion strips Contact surface with anti-abrasion strips, ideal for cargo with sensitive surfaces For straps with fitting Width 40 mm strap attachment points every 25 mm Load capacity up to 500 dan Includes end caps bott vario Rail length mm V V V V per metre* V *available in a 25 mm increments / max length 3000 mm 137

138 bott vario Load restraint Lashing rail - surface mounted For straps with fitting Width 65 mm Strap attachment points every 25 mm Protective end-cap (optional) Load capacity up to 500 dan Rail length mm V V V V per metre V End-cap *available in a 25 mm increments / max length 3000 mm Semi-circular lashing rail - surface mounted For straps with fitting Width 50 mm Strap attachment points every 25 mm Protective end-cap (optional) Load capacity up to 500 dan Rail length mm V V V V per metre V End-cap * available in a 25 mm increments / max. length 3000 mm 138

139 bott vario Load restraint Load-securing case for vehicles with lashing rails Ideal for vehicles with bott in-vehicle equipment including lashing components and/or lashing rails. The use of lashing straps with fittings allows cargo to be secured in a fast and reliable way by means of the lashing points or lashing rails of the vehicle. Set consisting of: 2x lashing strap, 3.5 m with cam buckle 2x lashing strap 3.5 m with fitting and ratchet 6x load-securing pad 6x edge protection pad includes important information about load restraint 454 x 318 x V Load-securing case for vehicles with lashing eyes and lashing rails Ideal for vehicles with bott in-vehicle equipment including lashing components and/or lashing rails. The use of lashing straps with fittings allows cargo to be secured in a fast and reliable way by means of the lashing points or lashing rails of the vehicle. Set consisting of: 2x lashing strap, 3.5 m with flat hook ends and clip 2x lashing strap 5 m with hook and ratchet 4x individual fitting 6x load-protection pad 6x edge protection pad includes important information about load restraint bott vario 454 x 318 x V 139

140 bott vario Load restraint Lashing rail with anti-abrasion strips and lashing strap with automatic winder Contact surface with anti-abrasion strips, ideal for cargo with sensitive surfaces Incl. lashing strap with automatic winder for screwing onto the lashing rail For quick and easy load restraint Rail length 1000 mm Strap length 2000 mm Load capacity up to 125 dan V Lashing strap with automatic winder For quick and easy load restraint Version with fittings without fixed ends, to be bolted onto in-vehicle equipment Branded strap in black Strap width 25 mm Strap length 2000 mm Load capacity up to 125 dan Version Fixed end mm Hook - ratchet Fitting - ratchet, to be bolted Fitting - Fitting

141 bott vario Load restraint Ratchet strap with fitting bott branded strap in anthracite grey Suitable for lashing rails Strap width 25 mm Load capacity 120 dan Strap length mm Fixed end mm Load capacity dan V V V V V V Ratchet strap with fitting and cam buckle bott branded strap in anthracite grey Suitable for lashing rails Strap width 25 mm Load capacity up to 150 dan bott vario Strap length mm Fixed end mm Load capacity dan V V V V V 141

142 bott vario Load restraint Threaded fitting with star-shaped handle grip Suitable for lashing rails Clamping capacity 0-29 mm Load capacity up to 500 dan M8 thread 45 x 25 x V Threaded fitting A B Suitable for lashing rails Load capacity up to 500 dan M8 thread Pack quantity: 2 pieces Pack quantity 2 Illust. Clamping capacity mm A 43 x 22 x V B 43 x 22 x V 142

143 bott vario Load restraint Aluminium lashing plate For straps with fitting Load capacity up to 500 dan Diameter x H mm 45 x Individual fitting without strap Suitable for use with lashing rails / lashing plate Load capacity up to 500 dan bott vario Colour 43 x 26 x 65 green V Design for bott vario in-vehicle equipment manufactured until 30/06/ x 25 x 65 grey V 143

144 bott vario Load restraint Bar-type lashing rail Designed for use with flat-hook-ended straps Aluminium Securing bars on a 100 mm increments Protective strip on leading edges to prevent abrasion of secured goods Load capacity up to 400 dan Rail length mm per metre *available in 100 mm increments, min. length 200 mm / max. length 3000 mm Cam buckle strap bott branded strap in anthracite grey Strap width 25 mm Load capacity up to 300 dan Strap length mm V V 144

145 bott vario Load restraint Ratchet strap with flat hook ends bott branded strap in anthracite grey For use with bar-type lashing rail Strap width 25 mm Load capacity up to 650 dan Strap length mm Fixed end mm V V V Cam buckle strap with flat hook ends bott branded strap in anthracite grey For use with bar-type lashing rail Strap width 25 mm Load capacity up to 150 dan bott vario Strap length mm Fixed end mm V V V 145

146 bott vario Load restraint Securing rails For straps with clip ends Aluminium Strap attachment points every 50 mm Load capacity up to 400 dan Rail length mm per metre *available in a 50 mm increments / max length 3000 mm Ratchet strap with clip bott branded strap in anthracite grey For securing rails Strap width 50 mm Load capacity up to 600 dan Strap length mm Fixed end mm V V 146

147 bott vario Load restraint Abrasion protection strip in an aluminium retaining channel Aluminium channel with rubber profile insert Rail length mm per metre * max. length 3000 mm Cam buckle strap with mounting plates bott branded strap in anthracite grey Strap width 25 mm Load capacity up to 150 dan bott vario Strap length mm Fixed end mm V 147

148 bott vario Load restraint 148

149 bott vario Load restraint Lashing eye Sheet steel, galvanised Flush-fitting Fixings included Load capacity up to dan 104 x 70 x V 145 x 100 x V Lashing eye Galvanised steel with plastic base Fixings included Load capacity up to 200 dan bott vario Diameter mm V 149

150 bott vario Load restraint Ratchet strap with hook end bott branded strap in anthracite grey Universal hook for use with lashing eyes Strap width 25 mm load capacity 400 dan Strap length mm Fixed end mm Load capacity up to dan V V Cam-buckle strap with plastic hooks bott branded strap in anthracite grey Suitable for perfo panels or components with perfo perforation Load capacity up to 100 dan Strap length mm Fixed end mm V 150

151 bott vario Load restraint Load restraint blanket For securing the load in the vehicle and on the flatbed Anti-theft protection thanks to the opaque fabric Tested according to VDI 2700 Load capacity up to 200 dan Colour: anthracite grey plus Delivery incl. perfo panel and hook kit Version W x D mm 4x cam buckle strap with flat hook ends 1250 x V 4x cam buckle strap with fitting 1250 x V 6x cam buckle strap with flat hook ends plusproduct 2290 x V 6x cam buckle strap with fitting 2290 x V Load-securing net Close-meshed knitted load-securing net Tested according to VDI 2700 Mesh width 45 x 45 mm Load capacity up to 400 dan Cam buckle strap around circumference bott vario Version W x D mm 4x hook 1250 x V 4x fitting 1250 x V 4x hook 2290 x V 4x fitting 2290 x V 151

152 bott vario Load restraint Load-restraint net made from webbing Load-securing net made from bott strap webbing in anthracite grey Tested according to VDI 2700 Mesh width 150 x 150 mm Load capacity up to 800 dan Ratchet strap around circumference Version W x D mm 4x hook 3000 x V 152

153 bott vario Load restraint Long-item tube holder Holder for storing long parts Pipe brackets The clamping range of the holder can be set individually using the included lashing strap and the holder roll. Cone for locating base tube for fixing standing tube in place Cone Ø 55 mm suitable for C steel tubes Cone Ø 75 mm suitable for B steel tubes Version Clamping range mm W x H mm Holder x V Cone - 55 x V Cone - 75 x V Snap fastener bott vario Version Max. clamping range mm Short rubber strap V Long rubber strap V 153

154 bott vario Load restraint Ladder holder, 3-part 3-part, for single and double ladders For attaching to roof spar in the vehicle by means of a central folding mechanism Colour: anthracite grey (RAL 7016) Suitable for use with ladder spars from - to mm V V 154

155 bott vario Load restraint Box shelves with bottboxes Aluminium box shelf Incl. bottboxes Max. load capacity 30 kg type Quantity bottboxes Ford Transit 2014 L2/H2/H x 234 x V Mercedes-Benz L2/H1/H2 / VW Crafter L2/H2/H x 234 x V Renault Master L2/H2 / Nissan NV 400 L2/H2 / Opel Movano L2/H x 234 x V Fiat Ducato L2/HH2 / Peugeot Boxer L2/H2 / Citroen Jumper L2/H x 234 x V Fiat Ducato L2/HH2 / Peugeot Boxer L2/H2 / Citroen Jumper L2/H x 234 x V Clamping bar holder set For securely storing 2 or 4 clamping bars while economising space Suitable for both versions of the clamping bars For mounting onto the lashing rails on the vehicle side wall or in the roof area Powder coated steel Colour: anthracite grey (RAL 7016) bott vario Version for 2 clamping bars 85 x 75 x for 4 clamping bars 85 x 75 x

156 bott vario Load restraint Height-adjustable clamping bars Used to secure large items in transit Telescopic bar can be shortened or extended easily without tools 4 different sizes available, each with a different adjustment range Guide value: Blocking capacity BC x 4 = max. perm. load weight for rear load restraint Clamping bar length mm Blocking capacity BC dan Height-adjustable clamping bars plus Used to secure large items in transit Telescopic bar can be shortened or extended easily without tools Simple operation with Click Lock when inserting. No axial preload force is necessary for clamping bar installation to ensure that there is no clamping pressure in the roof or the side wall For horizontal and vertical use Smooth contact surface over the entire length Continuous, uniform diameter of the clamping bar that always ensures flat contact surface with cargo Circumferential rubber coating for increased slip-resistance as well as additional protection for the load. Ø x H mm Blocking capacity BC dan 47 x x x x x

157 bott vario Load restraint Shovel and tool holder for the rear doors For holding multiple shovels or brooms Rear wall with perfo perforation Anodised aluminium Shovels fixed in place using 10 perfo hooks and 2 rubber straps Includes 2 height-adjustable mounting profiles for mounting the shovel holder to the vehicle door (only included with high-roof versions) Can be used for light parts such as aluminium ladders, brooms, shovels and other tools 500 x 240 x 1500 mm V Handle For safe entry into the vehicle For mounting in the sliding or rear door area Hole spacing 408 mm Colour: yellow-green (RAL 6018) anthracite grey (RAL 7016) bott vario Version yellow-green 40 x 75 x

158 bott vario Load restraint 158

159 bott vario Load restraint Holder for plate compactor For secure transportation of plate compactors in vans or on a flatbed Will accomodate a plate size of WxD: 280 x mm Handle height is adjustable Incl. lashing strap 315 x 560 x bott vario 159

160 bott vario Load restraint Clamping unit Convenient, safe clamping of different case sizes For assembly between endframes Clamping with cam lever Load can be clamped to left or right Suitable for all system depths 775 x 302 x V 1025 x 302 x V 1275 x 302 x V 1525 x 302 x V Hose holder Die-cast aluminium Fixings included 190 x 70 x x 110 x x 140 x x 190 x

161 bott vario In practice bott vario 161

162 bott vario Reference examples for accessories 162

163 bott vario In practice bott vario 163

164 bott vario Reference examples for accessories Accessories to suit every requirement bott vario offers many more accessories for vehicles and van racking than can be shown in this catalogue. decals, rear steps, roof racks, ramps, flashing beacons, telecommunications components, as well as complete stand-alone packages are only a few examples of the items offered by bott service partners to complement your in-vehicle equipment

165 bott vario Roof Rack Systems light, stable and safe for maximum storage space on vehicle roofs aerodynamic bott vario 165

166 bott vario Roof rack systems Simple roof rack systems Lightweight and sturdy roof rack system is made of weather-resistant anodized aluminium Lockable roof bar feet With 2 to 4 roof bars (depending on the vehicle) Ladder lift For fast, simple and secure loading and unloading of carried ladders Minimized physical stress and reduced risk of injury by providing support using adjustable gas struts during loading and unloading of ladders 3 versions for single, two-piece and extra-wide ladders Accessories Rear door ladder Rear ladder lift Aluminium ladder holder kit Ladder clamps Aluminium storage tube for long items 166

167 bott vario Roof rack systems and accessories Roof bar Lightweight and sturdy roof rack system is made of weatherresistant anodized aluminium Lockable roof bar feet With 2 to 4 roof bars (depending on the vehicle) Aerodynamic shape of individual components minimizes air resistance and wind noise Includes 2 pairs of load stops Load capacity: 75 kg per roof bar (maximum roof load is dependent upon the respective manufacturer specifications) Expandable with extensive accessories Rear loading roller fits to roof bar For fast, safe and easy loading and unloading of ladders and other cargo onto the roof rack Protects roof edge of the vehicle from damage Variably adjustable in depth Made from high quality stainless steel Maximum load capacity: 75 kg bott vario 167

168 bott vario Roof rack systems and accessories Roof racks for Citroën Build year from Wheelbase Length Height Version - rear of the vehicle Version Berlingo All H1 All 2x load carrier Berlingo All H1 All 3x load carrier Jumpy /3122 All H1 All 2x load carrier Jumpy /3122 All H1 All 3x load carrier Jumper /3450/4035/4035L All H1,H2,H3 Double doors 2x load carrier Jumper /3450/4035/4035L All H1,H2,H3 Double doors 3x load carrier Jumper /3450/4035/4035L All H1,H2,H3 Double doors 4x load carrier Rear loading rollers for Citroën Build year from Wheelbase Length Height Version - rear of the vehicle Berlingo L1 H1 Double doors Berlingo L2 H1 Double doors Jumpy /3122 All H1 Double doors Jumpy /3122 All H1 Tailgate Jumper /3450/4035/4035L All H1,H2,H3 Double doors Roof racks for Fiat Build year from Wheelbase Length Height Version - rear of the vehicle Version Doblo /3105 All H1 All 2x load carrier Doblo /3105 All H1 All 3x load carrier Scudo /3122 All H1 All 2x load carrier Scudo /3122 All H1 All 3x load carrier Ducato /3450/4035/4035L All H1,H2,H3 Double doors 2x load carrier Ducato /3450/4035/4035L All H1,H2,H3 Double doors 3x load carrier Ducato /3450/4035/4035L All H1,H2,H3 Double doors 4x load carrier Rear loading rollers for Fiat Build year from Wheelbase Length Height Version - rear of the vehicle Doblo /3105 All H1 Double doors Scudo /3122 All H1 Double doors Scudo /3122 All H1 Tailgate Ducato /3450/4035/4035L All H1,H2,H3 Double doors

169 bott vario Roof rack systems and accessories Roof racks for Ford Build year from Wheelbase Length Height Version - rear of the vehicle Version Transit Connect /3062 All H1 All 2x load carrier Transit Connect L2 H1 All 3x load carrier Transit Connect L1 H1 All 4x load carrier Transit Custom /3300 All H1 All 2x load carrier Transit Custom /3300 All H1 All 3x load carrier Transit Custom /3300 All H2 All 2x load carrier * Transit Custom /3300 All H2 All 3x load carrier * Transit /3750/3750L All H2/H3 Double doors 2x load carrier Transit /3750/3750L All H2/H3 Double doors 3x load carrier Transit /3750L L3, L4 H2/H3 Double doors 4x load carrier * When mounting a roof carrier for the vehicle height, H2 must be drilled. Maximum weight limit is 75 kg Rear loading rollers for Ford Build year from Wheelbase Length Height Version - rear of the vehicle Transit Connect /3062 All H1 Double doors Transit Costum /3300 All H1 Double doors Transit Costum /3300 All H2 Double doors Transit /3750 L2,L3 H2/H3 Double doors Roof racks for Mercedes-Benz Build year from Wheelbase Length Height Version - rear of the vehicle Version Citan /2697/3081 All H1 All 2x load carrier Citan L3 H1 All 3x load carrier Vito /3200L/3430 All H1 All 2x load carrier Vito /3200L/3430 All H1 All 4x load carrier Sprinter /3665 L1,L2 H1 Double doors 2x load carrier * Sprinter /3665 L1,L2 H1 Double doors 3x load carrier * Sprinter L2 H1 Double doors 4x load carrier * Sprinter /3665/4325/4325L All H2 Double doors 2x load carrier * Sprinter /3665/4325/4325L All H2 Double doors 3x load carrier * Sprinter /4325/4325L L2,L3,L4 H2 Double doors 4x load carrier * * Base load carrier is not suitable for fibre optic roofs (super-high roofs) and vehicles fitted with rear-view cameras bott vario Rear loading rollers for Mercedes-Benz Build year from Wheelbase Length Height Version - rear of the vehicle Citan /2697/3081 All H1 Double doors Vito L3 H1 Tailgate * Vito /3200L L1,L2 H1 Double doors Vito L3 H1 Double doors Sprinter /3665 L1,L2 H1 Double doors Sprinter /4325/4325L L2,L3,L4 H2 Double doors * Loading rollers are only possible with 4 load carriers 169

170 bott vario Roof rack systems and accessories Roof racks for Nissan Build year from Wheelbase Length Height Version - rear of the vehicle Version NV L1 H1 All 2x load carrier NV L1 H1 All 3x load carrier NV /3682/4332 All H1,H2 Double doors 2x load carrier * NV /3682/4332 All H1,H2 Double doors 3x load carrier * NV /3682/4332 All H1,H2 Double doors 4x load carrier * * Base load carrier is not suitable for fibre optic roofs (super-high roofs), since no assembly mounts for the roof carrier system are available Rear loading rollers for Nissan Build year from Wheelbase Length Height Version - rear of the vehicle NV All H1 Double doors NV /3682/4332 All H1,H2,H3 Double doors Roof racks for Opel Build year from Wheelbase Length Height Version - rear of the vehicle Version Combo /3105 All H1 All 2x load carrier Combo /3105 All H1 All 3x load carrier Vivaro /3498 All H1 All 2x load carrier Vivaro /3498 All H1 All 3x load carrier Vivaro /3498 All H1 All 4x load carrier Vivaro /3498 All H2 All 2x load carrier Vivaro /3498 All H2 All 3x load carrier Vivaro /3498 All H2 All 4x load carrier Movano /3682/4332 All H1,H2 Double doors 2x load carrier * Movano /3682/4332 All H1,H2 Double doors 3x load carrier * Movano /3682/4332 All H1,H2 Double doors 4x load carrier * * Base load carrier is not suitable for fibre optic roofs (super-high roofs), since no assembly mounts for the roof carrier system are available Rear loading rollers for Opel Build year from Wheelbase Length Height Version - rear of the vehicle Combo /3105 All H1 Double doors Vivaro /3498 All H1 Double doors Vivaro /3498 All H1 Tailgate Vivaro /3498 All H2 Double doors Movano /3682/4332 All H1,H2,H3 Double doors

171 bott vario Roof rack systems and accessories Roof racks for Peugeot Build year from Wheelbase Length Height Version - rear of the vehicle Version Partner All H1 All 2x load carrier Partner All H1 All 3x load carrier Expert /3122 All H1 All 2x load carrier Expert /3122 All H1 All 3x load carrier Boxer /3450/4035/4035L All H1,H2,H3 Double doors 2x load carrier Boxer /3450/4035/4035L All H1,H2,H3 Double doors 3x load carrier Boxer /3450/4035/4035L All H1,H2,H3 Double doors 4x load carrier Rear loading rollers for Peugeot Build year from Wheelbase Length Height Version - rear of the vehicle Partner L1 H1 Double doors Partner L2 H1 Double doors Expert /3122 All H1 Double doors Expert /3122 All H1 Tailgate Boxer /3450/4035/4035L All H1,H2,H3 Double doors Roof racks for Renault Build year from Wheelbase Length Height Version - rear of the vehicle Version Kangoo /2697/3081 All H1 All 2x load carrier Kangoo L3 H1 All 3x load carrier Trafic /3498 All H1 All 2x load carrier Trafic /3498 All H1 All 3x load carrier Trafic /3498 All H1 All 4x load carrier Trafic /3498 All H2 All 2x load carrier Trafic /3498 All H2 All 3x load carrier Trafic /3498 All H2 All 4x load carrier Master /3682/4332 All H1,H2 Double doors 2x load carrier * Master /3682/4332 All H1,H2 Double doors 3x load carrier * Master /3682/4332 All H1,H2 Double doors 4x load carrier * * Base load carrier is not suitable for fibre optic roofs (super-high roofs), since no assembly mounts for the roof carrier system are available bott vario Rear loading rollers for Renault Build year from Wheelbase Length Height Version - rear of the vehicle Kangoo /2697/3081 All H1 Double doors Trafic /3498 All H1 Double doors Trafic /3498 All H1 Tailgate Trafic /3498 All H2 Double doors Master /3682/4332 All H1,H2,H3 Double doors

172 bott vario Roof rack systems and accessories Roof racks for Toyota Build year from Wheelbase Length Height Version - rear of the vehicle Version Proace /3122 All H1 All 2x load carrier Proace /3122 All H1 All 3x load carrier Rear loading rollers for Toyota Build year from Wheelbase Length Height Version - rear of the vehicle Proace /3122 All H1 Double doors Proace /3122 All H1 Tailgate Roof racks for Volkswagen Build year from Wheelbase Length Height Version - rear of the vehicle Version Caddy /3000 All H1 All 2x load carrier Caddy L1 H1 All 3x load carrier Caddy Maxi L2 H1 All 4x load carrier T /3400 All H1 All 2x load carrier T /3400 All H1 All 4x load carrier Crafter /3665 L1,L2 H1 Double doors 2x load carrier * Crafter /3665 L1,L2 H1 Double doors 3x load carrier * Crafter L2 H1 Double doors 4x load carrier * Crafter /3665/4325/4325L All H2 Double doors 2x load carrier * Crafter /3665/4325/4325L All H2 Double doors 3x load carrier * Crafter /4325/4325L L2,L3,L4 H2 Double doors 4x load carrier * Rear loading rollers for Volkswagen Build year from Wheelbase Length Height Version - rear of the vehicle Caddy / Caddy Maxi /3000 All H1 Double doors T /3400 All H1 Tailgate T /3400 All H1 Double doors Crafter /3665 L1,L2 H1 Double doors Crafter /4325/4325L All H2 Double doors

173 bott vario More accessories for roof rack systems Aluminium ladder holder kit To secure ladders on vehicles with low roofs Comfortable operation from the floor Easy reloading with low-friction slides Height and width for ladders of different sizes and types are adjustable (height mm, width mm) Suitable for up to three-piece ladders Secured on the rear of the roof rack with multiple adjustable lashing straps Ladder clamps Patented clamping system for fast and safe handling Lockable Suitable for up to four-piece ladders With corrosion-resistant stainless steel anchor hook Pack quantity 2 bott vario Aluminium storage tube for long items For transport of pipes and other long cargo items Minimal air resistance thanks to an aerodynamic plastic front cap Lockable and puncture-resistant steel insert for both ends Made of powder coated aluminium Maximum load capacity: 50 kg Version for pipes up to 2 m Version for pipes up to 3 m

174 bott vario Basket carrier systems Basket carriers Lightweight and sturdy roof rack system is made of weatherresistant anodized aluminium Aerodynamic shape of individual components minimizes air resistance and wind noise With stainless steel loading rollers for fast, safe and easy loading and unloading of ladders and other cargo onto the basket carrier Expandable with extensive accessories Basket carrier for Citroën Build year from Wheelbase Length Height Version - rear of the vehicle Version Berlingo L1 H1 Double doors 1.25 x 2.4 m basket carrier Berlingo L1 H1 Tailgate 1.25 x 2.2 m basket carrier Berlingo L2 H1 Double doors 1.25 x 2.6 m basket carrier Berlingo L2 H1 Tailgate 1.25 x 2.4 m basket carrier Jumpy L1 H1 Double doors 1.40 x 2.6 m basket carrier Jumpy L1 H1 Tailgate 1.40 x 2.4 m basket carrier Jumpy L2 H1 Double doors 1.40 x 2.8 m basket carrier Jumpy L2 H1 Tailgate 1.40 x 2.6 m basket carrier Jumper L1 H1 Double doors 1.80 x 3.2 m basket carrier Jumper L2 H1 Double doors 1.80 x 3.4 m basket carrier Jumper L2 H2 Double doors 1.80 x 3.2 m basket carrier Jumper L3 H2 Double doors 1.80 x 3,8 m basket carrier Jumper L L4 H2 Double doors 1.80 x 4.2 m basket carrier Jumper L L4 H3 Double doors 1.60 x 4.2 m basket carrier Basket carrier for Fiat Build year from Wheelbase Length Height Version - rear of the vehicle Version Doblo L1 H1 Double doors 1.25 x 2.0 m basket carrier Doblo L2 H1 Double doors 1.25 x 2.4 m basket carrier Scudo L1 H1 Double doors 1.40 x 2.6 m basket carrier Scudo L1 H1 Tailgate 1.40 x 2.4 m basket carrier Scudo L2 H1 Double doors 1.40 x 2.8 m basket carrier Scudo L2 H1 Tailgate 1.40 x 2.6 m basket carrier Ducato L1 H1 Double doors 1.80 x 3.2 m basket carrier Ducato L2 H1 Double doors 1.80 x 3.4 m basket carrier Ducato L2 H2 Double doors 1.80 x 3.2 m basket carrier Ducato L4 H2 Double doors 1.80 x 3.8 m basket carrier Ducato L L5 H2 Double doors 1.80 x 4.2 m basket carrier Ducato L L5 H3 Double doors 1.60 x 4.2 m basket carrier

175 bott vario Basket carrier systems Basket carrier for Ford Build year from Wheelbase Length Height Version - rear of the vehicle Version Transit Connect L1 H1 Double doors 1.25 x 2.0 m basket carrier Transit Connect L2 H1 Double doors 1.25 x 2.4 m basket carrier Transit Custom L1 H1 Double doors 1.40 x 3.2 m basket carrier Transit Custom L1 H1 Tailgate 1.40 x 3.0 m basket carrier Transit Custom L2 H1 Double doors 1.40 x 3.6 m basket carrier Transit Custom L2 H1 Tailgate 1.40 x 3.4 m basket carrier Transit Custom L1 H2 Double doors 1.25 x 2.2 m basket carrier * Transit Custom L2 H2 Double doors 1.25 x 2.6 m basket carrier * Transit L2 H2 Double doors 1.60 x 3.0 m basket carrier Transit L3 H2 Double doors 1.60 x 3.4 m basket carrier Transit L3 H3 Double doors 1.60 x 3.2 m basket carrier Transit L L4 H3 Double doors 1.60 x 4.0 m basket carrier Transit L2 H3 Double doors 1.60 x 2.8 m basket carrier * When mounting a roof carrier for the vehicle height, H2 must be drilled. Maximum weight limit is 75 kg Basket carrier for Mercedes-Benz Build year from Wheelbase Length Height Version - rear of the vehicle Version Citan L1 H1 Double doors 1.25 x 2.0 m basket carrier Citan L2 H1 Double doors 1.25 x 2.2 m basket carrier Citan L3 H1 Double doors 1.25 x 2.6 m basket carrier Vito L1 H1 Double doors 1.40 x 3.0 m basket carrier Vito L1 H1 Tailgate 1.40 x 2.8 m basket carrier Vito L L2 H1 Double doors 1.40 x 3.2 m basket carrier Vito L L2 H1 Tailgate 1.40 x 3.0 m basket carrier Vito L3 H1 Double doors 1.40 x 3.4 m basket carrier Vito L3 H1 Tailgate 1.40 x 3.2 m basket carrier Sprinter L1 H1 Double doors 1.60 x 3.2 m basket carrier * Sprinter L1 H2 Double doors 1.60 x 2.8 m basket carrier * Sprinter L2 H1 Double doors 1.60 x 4.0 m basket carrier * Sprinter L2 H2 Double doors 1.60 x 3.4 m basket carrier * Sprinter L3 H2 Double doors 1.60 x 4.4 m basket carrier * Sprinter L L4 H2 Double doors 1.60 x 4.8 m basket carrier * * Basket carrier is not suitable for fibre optic roofs (super-high roofs) and vehicles fitted with rear-view cameras bott vario Basket carrier for Nissan Build year from Wheelbase Length Height Version - rear of the vehicle Version NV L1 H1 Double doors 1.25 x 2.2 m basket carrier NV L1 H1 Tailgate 1.25 x 2.0 m basket carrier NV L1 H1,H2 Double doors 1.60 x 3.0 m basket carrier * NV L2 H2 Double doors 1.60 x 3.4 m basket carrier * NV FA/3682 HA L3 H2 Double doors 1.60 x 3.8 m basket carrier * NV L4 H2 Double doors 1.60 x 4.4 m basket carrier * * Basket carrier is not suitable for fibre optic roofs, since no assembly mounts for the basket carrier system are available 175

176 bott vario Basket carrier systems Basket carrier for Opel Build year from Wheelbase Length Height Version - rear of the vehicle Version Combo L1 H1 Double doors 1.25 x 2.0 m basket carrier Combo L2 H1 Double doors 1.25 x 2.4 m basket carrier Vivaro L1 H1 Double doors 1.60 x 2.8 m basket carrier Vivaro L1 H1 Tailgate 1.60 x 2.6 m basket carrier Vivaro L2 H1 Double doors 1.60 x 3.2 m basket carrier Vivaro L2 H1 Tailgate 1.60 x 3.0 m basket carrier Vivaro L1 H2 Double doors 1.40 x 2.2 m basket carrier Vivaro L2 H2 Double doors 1.40 x 2.6 m basket carrier Movano L1 H1,H2 Double doors 1.60 x 3.0 m basket carrier * Movano L2 H2 Double doors 1.60 x 3.4 m basket carrier * Movano FA/3682 HA L3 H2 Double doors 1.60 x 3.8 m basket carrier * Movano L4 H2 Double doors 1.60 x 4.4 m basket carrier * * Basket carrier is not suitable for fibre optic roofs, since no assembly mounts for the basket carrier system are available Basket carrier for Peugeot Build year from Wheelbase Length Height Version - rear of the vehicle Version Partner L1 H1 Double doors 1.25 x 2.4 m basket carrier Partner L1 H1 Tailgate 1.25 x 2.2 m basket carrier Partner L2 H1 Double doors 1.25 x 2.6 m basket carrier Partner L2 H1 Tailgate 1.25 x 2.4 m basket carrier Expert L1 H1 Double doors 1.40 x 2.6 m basket carrier Expert L1 H1 Tailgate 1.40 x 2.4 m basket carrier Expert L2 H1 Double doors 1.40 x 2.8 m basket carrier Expert L2 H1 Tailgate 1.40 x 2.6 m basket carrier Boxer L1 H1 Double doors 1.80 x 3.2 m basket carrier Boxer L2 H1 Double doors 1.80 x 3.4 m basket carrier Boxer L2 H2 Double doors 1.80 x 3.2 m basket carrier Boxer L3 H2 Double doors 1.80 x 3.8 m basket carrier Boxer L L4 H2 Double doors 1.80 x 4.2 m basket carrier Boxer L L4 H3 Double doors 1.60 x 4.2 m basket carrier

177 bott vario Basket carrier systems Basket carrier for Renault Build year from Wheelbase Length Height Version - rear of the vehicle Version Kangoo L1 H1 Double doors 1.25 x 2.0 m basket carrier Kangoo L2 H1 Double doors 1.25 x 2.2 m basket carrier Kangoo L3 H1 Double doors 1.25 x 2.6 m basket carrier Trafic L1 H1 Double doors 1.60 x 2.8 m basket carrier Trafic L1 H1 Tailgate 1.60 x 2.6 m basket carrier Trafic L2 H1 Double doors 1.60 x 3.2 m basket carrier Trafic L2 H1 Tailgate 1.60 x 3.0 m basket carrier Trafic L1 H2 Double doors 1.40 x 2.2 m basket carrier Trafic L2 H2 Double doors 1.40 x 2.6 m basket carrier Master L1 H1,H2 Double doors 1.60 x 3.0 m basket carrier * Master L2 H2 Double doors 1.60 x 3.4 m basket carrier * Master FA/3682 HA L3 H2 Double doors 1.60 x 3.8 m basket carrier * Master L4 H2 Double doors 1.60 x 4.4 m basket carrier * * Basket carrier is not suitable for fibre optic roofs, since no assembly mounts for the basket carrier system are available Basket carrier for Toyota Build year from Wheelbase Length Height Version - rear of the vehicle Version Proace L1 H1 Double doors 1.40 x 2.6 m basket carrier Proace L1 H1 Tailgate 1.40 x 2.4 m basket carrier Proace L2 H1 Double doors 1.40 x 2.8 m basket carrier Proace L2 H1 Tailgate 1.40 x 2.6 m basket carrier Basket carrier for Volkswagen bott vario Build year from Wheelbase Length Height Version - rear of the vehicle Version Caddy L1 H1 Double doors 1.25 x 2.2 m basket carrier Caddy L1 H1 Tailgate 1.25 x 2.0 m basket carrier Caddy L2 H1 Double doors 1.25 x 2.6 m basket carrier Caddy L2 H1 Tailgate 1.25 x 2.4 m basket carrier T L1 H1 Double doors 1.40 x 3.0 m basket carrier T L1 H1 Tailgate 1.40 x 2.8 m basket carrier T L2 H1 Double doors 1.40 x 3.4 m basket carrier T L2 H1 Tailgate 1.40 x 3.2 m basket carrier Crafter L1 H1 Double doors 1.60 x 3.2 m basket carrier * Crafter L1 H2 Double doors 1.60 x 2.8 m basket carrier * Crafter L2 H1 Double doors 1.60 x 4.0 m basket carrier * Crafter L2 H2 Double doors 1.60 x 3.4 m basket carrier * Crafter L3 H2 Double doors 1.60 x 4.4 m basket carrier * Crafter L L4 H2 Double doors 1.60 x 4.8 m basket carrier * * Basket carrier is not suitable for fibre optic roofs (super-high roofs) and vehicles fitted with rear-view cameras 177

178 bott vario More accessories for roof rack systems Aluminium ladder holder kit To secure ladders on vehicles with low roofs Comfortable operation from the floor Easy reloading with low-friction slides Height and width for ladders of different sizes and types are adjustable (height mm, width mm) Suitable for up to three-piece ladders Secured on the rear of the roof rack with multiple adjustable lashing straps Ladder clamps Patented clamping system for fast and safe handling Lockable Suitable for up to four-piece ladders With corrosion-resistant stainless steel anchor hook Pack quantity Aluminium loading tube for long items For transport of pipes and other long cargo items Minimal air resistance thanks to an aerodynamic plastic front cap Lockable and puncture-resistant steel insert for both ends Made of powder coated aluminium Maximum load capacity: 50 kg Version for pipes up to 2 m Version for pipes up to 3 m

179 bott vario Rear ladder lifts Rear ladder lifts for roof rack and basket carrier systems For fast, simple and secure loading and unloading of carried ladders Minimized physical stress and reduced risk of injury by providing support using adjustable gas springs during loading and unloading of ladders 3 versions for single, two-piece and extra-wide ladders Particularly robust aluminium components with stainless steel elements Maximum load capacity: 60 kg Rear ladder lift for Citroën Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Berlingo All H1 Double doors 1x ladder 2.2 m * Berlingo All H1 Double doors 2x ladder 2.2 m * Berlingo All H1 Double doors 1x extra-wide ladder 2.2 m * Jumpy /3122 All H1 Double doors 1x ladder 2.2 m * Jumpy /3122 All H1 Double doors 2x ladder 2.2 m * Jumpy /3122 All H1 Double doors 1x extra-wide ladder 2.2 m * Jumpy L2 H2 Double doors 1x ladder 3.1 m * Jumpy L2 H2 Double doors 2x ladder 3.1 m * Jumpy L2 H2 Double doors 1x extra-wide ladder 3.1 m * Jumper /3450/4035/4035L All H1,H2,H3 Double doors 1x ladder 3.1 m * Jumper /3450/4035/4035L All H1,H2,H3 Double doors 2x ladder 3.1 m * Jumper /3450/4035/4035L All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m * * only available for at least 3 load carriers bott vario Rear ladder lift for Fiat Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Doblo /3105 All H1 Double doors 1x ladder 2.2 m * Doblo /3105 All H1 Double doors 2x ladder 2.2 m * Doblo /3105 All H1 Double doors 1x extra-wide ladder 2.2 m * Scudo /3122 All H1 Double doors 1x ladder 2.2 m * Scudo /3122 All H1 Double doors 2x ladder 2.2 m * Scudo /3122 All H1 Double doors 1x extra-wide ladder 2.2 m * Scudo L2 H2 Double doors 1x ladder 3.1 m * Scudo L2 H2 Double doors 2x ladder 3.1 m * Scudo L2 H2 Double doors 1x extra-wide ladder 3.1 m * Ducato /3450/4035/4035L All H1,H2,H3 Double doors 1x ladder 3.1 m * Ducato /3450/4035/4035L All H1,H2,H3 Double doors 2x ladder 3.1 m * Ducato /3450/4035/4035L All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m * * only available for at least 3 load carriers 179

180 bott vario Rear ladder lifts 180

181 bott vario Rear ladder lifts Rear ladder lift for Ford Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Transit Connect /3062 All H1 Double doors 1x ladder 2.2 m * Transit Connect /3062 All H1 Double doors 2x ladder 2.2 m * Transit Connect /3062 All H1 Double doors 1x extra-wide ladder 2.2 m * Transit Custom /3300 All H1/H2 Double doors 1x ladder 3.1 m * Transit Custom /3300 All H1 Double doors 2x ladder 3.1 m * Transit Custom /3300 All H1 Double doors 1x extra-wide ladder 3.1 m * Transit /3750/3750L All H2/H3 Double doors 1x ladder 3.1 m * Transit /3750/3750L All H2/H3 Double doors 2x ladder 3.1 m * Transit /3750/3750L All H2/H3 Double doors 1x extra-wide ladder 3.1 m * * only available for at least 3 load carriers Rear ladder lift for Mercedes Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Citan L3 H1 Double doors 1x ladder 2.2 m * Citan L3 H1 Double doors 2x ladder 2.2 m * Citan L3 H1 Double doors 1x extra-wide ladder 2.2 m * Vito /3200L/3430 All H1 Double doors 1x ladder 3.1 m ** Vito /3200L/3430 All H1 Double doors 2x ladder 3.1 m ** Vito /3200L/3430 All H1 Double doors 1x extra-wide ladder 3.1 m ** Sprinter /3665/4325/4325L All H1,H2,H3 Double doors 1x ladder 3.1 m * Sprinter /3665/4325/4325L All H1,H2,H3 Double doors 2x ladder 3.1 m * Sprinter /3665/4325/4325L All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m * * only available for at least 3 load carriers ** only available for at least 4 load carriers bott vario Rear ladder lift for Nissan Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders NV L1 H1 Double doors 1x ladder 2.2 m * NV L1 H1 Double doors 2x ladder 2.2 m * NV L1 H1 Double doors 1x extra-wide ladder 2.2 m * NV /3682/4332 All H1,H2,H3 Double doors 1x ladder 3.1 m * NV /3682/4332 All H1,H2,H3 Double doors 2x ladder 3.1 m * NV /3682/4332 All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m * * only available for at least 3 load carriers 181

182 bott vario Rear ladder lifts Rear ladder lift for Opel Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Combo /3105 All H1 Double doors 1x ladder 2.2 m * Combo /3105 All H1 Double doors 2x ladder 2.2 m * Combo /3105 All H1 Double doors 1x extra-wide ladder 2.2 m * Vivaro /3498 All H1,H2 Double doors 1x ladder 3.1 m ** Vivaro /3498 All H1,H2 Double doors 2x ladder 3.1 m ** Vivaro /3498 All H1,H2 Double doors 1x extra-wide ladder 3.1 m ** Movano /3682/4332 All H1,H2,H3 Double doors 1x ladder 3.1 m * Movano /3682/4332 All H1,H2,H3 Double doors 2x ladder 3.1 m * Movano /3682/4332 All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m * * only available for at least 3 load carriers ** only available for at least 4 load carriers Rear ladder lift for Peugeot Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Partner All H1 Double doors 1x ladder 2.2 m * Partner All H1 Double doors 2x ladder 2.2 m * Partner All H1 Double doors 1x extra-wide ladder 2.2 m * Expert /3122 All H1 Double doors 1x ladder 2.2 m * Expert /3122 All H1 Double doors 2x ladder 2.2 m * Expert /3122 All H1 Double doors 1x extra-wide ladder 2.2 m * Expert L2 H2 Double doors 1x ladder 3.1 m * Expert L2 H2 Double doors 2x ladder 3.1 m * Expert L2 H2 Double doors 1x extra-wide ladder 3.1 m * Boxer /3450/4035/4035L All H1,H2,H3 Double doors 1x ladder 3.1 m * Boxer /3450/4035/4035L All H1,H2,H3 Double doors 2x ladder 3.1 m * Boxer /3450/4035/4035L All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m * * only available for at least 3 load carriers Rear ladder lift for Renault Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Kangoo L3 H1 Double doors 1x ladder 2.2 m * Kangoo L3 H1 Double doors 2x ladder 2.2 m * Kangoo L3 H1 Double doors 1x extra-wide ladder 2.2 m * Trafic /3498 All H1,H2 Double doors 1x ladder 3.1 m ** Trafic /3498 All H1,H2 Double doors 2x ladder 3.1 m ** Trafic /3498 All H1,H2 Double doors 1x extra-wide ladder 3.1 m ** Master /3682/4332 All H1,H2,H3 Double doors 1x ladder 3.1 m * Master /3682/4332 All H1,H2,H3 Double doors 2x ladder 3.1 m * Master /3682/4332 All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m * * only available for at least 3 load carriers ** only available for at least 4 load carriers 182

183 bott vario Rear ladder lifts Rear ladder lift for Toyota Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Proace /3122 All H1 Double doors 1x ladder 2.2 m * Proace /3122 All H1 Double doors 2x ladder 2.2 m * Proace /3122 All H1 Double doors 1x extra-wide ladder 2.2 m * Proace L2 H2 Double doors 1x ladder 3.1 m * Proace L2 H2 Double doors 2x ladder 3.1 m * Proace L2 H2 Double doors 1x extra-wide ladder 3.1 m * * only available for at least 3 load carriers Rear ladder lift for Volkswagen Build year from Wheelbase Length Height Version - rear of the vehicle Version Number of ladders Caddy /3000 All H1 Double doors 1x ladder 2.2 m * Caddy /3000 All H1 Double doors 2x ladder 2.2 m * Caddy /3000 All H1 Double doors 1x extra-wide ladder 2.2 m * T /3400 All H1 Double doors 1x ladder 3.1 m ** T /3400 All H1 Double doors 2x ladder 3.1 m ** T /3400 All H1 Double doors 1x extra-wide ladder 3.1 m ** Crafter /3665/4325/4325L All H1,H2,H3 Double doors 1x ladder 3.1 m * Crafter /3665/4325/4325L All H1,H2,H3 Double doors 2x ladder 3.1 m * Crafter /3665/4325/4325L All H1,H2,H3 Double doors 1x extra-wide ladder 3.1 m * * only available for at least 3 load carriers ** only available for at least 4 load carriers bott vario 183

184 bott vario Rear door ladder Rear door ladder For mounting on rear doors of vehicles More secure access to vehicle roof is guaranteed with non-slip rungs and ergonomic handrails Load capacity up to max. of 100 kg Optimal grip thanks to vehicle-specific installation kit Galvanised and powder-coated for maximum corrosion resistance Rear door ladder for Citroën Build year from Wheelbase Length Height Version - rear of the vehicle Jumpy /3122 All H1 Double doors * Jumpy L2 H2 Double doors * Jumper /4035 L2, L3 H2 Double doors * * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Fiat Build year from Wheelbase Length Height Version - rear of the vehicle Scudo /3122 All H1 Double doors * Scudo L2 H2 Double doors * Ducato /4035 L2, L4 H2 Double doors * * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Ford Build year from Wheelbase Length Height Version - rear of the vehicle Transit Custom /3300 All H1/H2 Double doors * Transit /3750/3750L All H2/H3 Double doors * * Rear door ladder is not suitable for vehicle rear doors with windows 184

185 bott vario Rear door ladder Rear door ladder for Mercedes-Benz Build year from Wheelbase Length Height Version - rear of the vehicle Vito /3200L/3430 All H1 Double doors * Sprinter /3665/4325/4325L All H1 Double doors * Sprinter /3665/4325/4325L All H2 Double doors * * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Nissan Build year from Wheelbase Length Height Version - rear of the vehicle NV L1 H1 Double doors * NV /3682/4332 All H1 Double doors * NV /3682/4332 All H2 Double doors * * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Opel Build year from Wheelbase Length Height Version - rear of the vehicle Vivaro /3498 All H1 Double doors * Vivaro /3498 All H2 Double doors * Movano /3682/4332 All H1 Double doors * Movano /3682/4332 All H2 Double doors * * Rear door ladder is not suitable for vehicle rear doors with windows bott vario Rear door ladder for Peugeot Build year from Wheelbase Length Height Version - rear of the vehicle Expert /3122 All H1 Double doors * Expert L2 H2 Double doors * Boxer /4035 L2, L3 H2 Double doors * * Rear door ladder is not suitable for vehicle rear doors with windows 185

186 bott vario Rear door ladder Rear door ladder for Renault Build year from Wheelbase Length Height Version - rear of the vehicle Trafic /3498 All H1 Double doors * Trafic /3498 All H2 Double doors * Master /3682/4332 All H1 Double doors * Master /3682/4332 All H2 Double doors * * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Toyota Build year from Wheelbase Length Height Version - rear of the vehicle Proace /3122 All H1 Double doors * Proace L2 H2 Double doors * * Rear door ladder is not suitable for vehicle rear doors with windows Rear door ladder for Volkswagen Build year from Wheelbase Length Height Version - rear of the vehicle T /3400 All H1 Double doors * Crafter /3665/4325/4325L All H1 Double doors * Crafter /3665/4325/4325L All H2 Double doors * * Rear door ladder is not suitable for vehicle rear doors with windows 186

187 bott vario Accessories Clothes hooks Consists of 2 plastic holders, a plastic-coated steel tube and 4 hooks Black / galvanised hooks 457 x 26 x V Folding table fitting Galvanised steel Use to create a folding work surface 3-position angle adjustment Load capacity 200 kg bott vario System depth mm 30 x 300 x x 400 x

188 bott vario Accessories Document / first-aid kit holders Anodised aluminium Version From system depth mm DIN A4 portrait x 85 x V DIN A4 landscape x 85 x V DIN first-aid kits x 93 x V Long items x 114 x V Long items x 76 x V DIN A4 angled x 300 x V 188

189 bott vario Accessories Front loading deposit safe Safe for securely transporting money and valuables in the vehicle The deposit safe cannot be opened by the driver; the contents are removed at the main office Deposit drawer with anti-fishing protection Puncture proof security lock Colour: anthracite grey (RAL 7016) Version Safe with a deposit drawer 405 x 341 x Safe For vertical or horizontal use Puncture proof security lock Colour: anthracite grey (RAL 7016) bott vario Version Safe 420 x 200 x

190 bott vario Accessories Ring binder compartment For 2 or 6 DIN A4 ring binders, width 80 mm Anodised aluminium Dividers (optional) Version for 2 ring binders 163 x 311 x V for 6 ring binders 496 x 311 x V Dividers (pair) 284 x 218 x V Jerrycan compartment For 5L plastic fuel cans or 10L/20L steel fuel canisters For 5L canisters: made of anodised aluminium For 10L/20L canisters: made of powder-coated steel RAL 7016 Incl. cam buckle strap for securing canisters while driving Version for 1x 5l canister 163 x 311 x V for 1x 10L/20L jerrycan 173 x 342 x V for 3x 10L/20L canister 518 x 342 x V 190

191 bott vario Accessories Storage box for end frames Storage box for installing on bott vario end frames Incl. perfo clips and bolts for securing Colour: anthracite grey (RAL 7016) From system depth mm x 100 x V x 100 x V CarOffice Storage box with folding anti-slip writing surface For attaching to passenger seat using seat belt With different storage compartments Incl. removable box for small items bott vario 665 x 370 x V 191

192 bott vario Accessories bott vario CarOffice Practical way to store office supplies Ensures order in the passenger seat Two pockets for brochures, catalogues and other documents A storage box for small items that can be easily removed A folding, non-slip writing surface with magnetic holders and built-in bottle holders Simple and secure mounting in the passenger seat with a seat belt and a variably adjustable headrest adapter 340 x 520 x V Document holder A lighter plastic pocket for documents, brochures and small document folders A4 landscape format Incl. label clip for colour coordination Hole pattern matched to the perfo hole grid in the bott vario end frames for quick installation without drilling From system depth mm 340 x 100 x

193 bott vario Accessories ABC powder extinguisher 2 kg with vehicle mount 2 kg ABC dry powder acc. to DIN EN 3 Constant pressure device Secured against accidental use Approx. 4 m effective range One-handed operation Incl. vehicle mount V ABC powder extinguisher 6 kg with vehicle mount 6 kg ABC dry powder acc. to DIN EN 3 Charger Secured against accidental use Incl. vehicle mount With CO 2 gas cartridge bott vario V 193

194 bott vario Accessories Traffic cone with foot Height while folded: 60 mm With flashing and continuous light Incl. storage bag 280 x 280 x x 390 x V Rotating beacon 12/24 V A Latest LED technology Magnetic base version with 2.5m spiral power cable and 12V cigarette lighter plug Version with fixing screws with 2-wire connection cable 0.1 m B Version Power consumption Watt Ø x H mm A with magnetic base x V B for screw-on x V 194

195 bott vario Lighting and power LED flood light 12/24 V For lighting the vehicle surroundings Latest LED technology Protection class IP67 2-wire connection cable 0.35 m LED Lumen Power consumption Watt x 82 x V bott vario 195

196 bott vario Lighting and power LED Worklight 12/24 V Latest LED technology For outdoor use Scattering angle 90 Protection class IP69 Can be swivelled LED Lumen Power consumption Watt x 49.5 x V LED Worklight 12/24 V Latest LED technology For outdoor use Aluminium pressure-casted housing with impact-resistant plastic lens Protection class IP69K Can be swivelled 2-wire connection cable 2.5 m Fixings included LED Lumen Power consumption Watt x 29 x V 196

197 bott vario Lighting and power LED strip 12 V Latest LED technology Light colour: Neutral white 6000 Kelvin Protection class IP65 With waterproof, transparent silicone casing With 2-wire connection cable 0.5 m Self-adhesive with 3 m tape Can be shortened in 50 mm increments Power consumption Watt Length mm LED surface light 12 V Bright spread pattern to illuminate large surfaces Latest LED technology Scattering angle 90 Light colour: Neutral white 6000 Kelvin Protection class IP67 Housing made of robust polycarbonate 2-wire connection cable 0.5 m Fixings included bott vario LED Lumen Power consumption Watt x 170 x V 197

198 bott vario Lighting and power 12 V LED light with motion sensor On/off switch Latest LED technology Scattering angle 120 Light colour: Neutral white Kelvin Aluminium housing 2-wire connection cable 1m Fixings included LED Lumen Power consumption Watt x 30 x V x 30 x V 12 V LED light with motion sensor On/off switch Latest LED technology Scattering angle 120 Protection class IP40 LED Lumen Power consumption Watt x 40 x V 198

199 bott vario Lighting and power LED strip light 12V On/off switch State-of-the-art LED technology Scattering angle 160 Power consumption = 0.6 A Plastic housing LED Lumen x 32 x V 230 V LED light with motion sensor On/off switch Latest LED technology Scattering angle 120 Light colour: Neutral white 4000 Kelvin Aluminium housing Fixings included bott vario LED Lumen Power consumption Watt x 41 x V x 41 x V 3000 mm connection cable with schuko plug V 3-wire, 200 mm connection cable without plug for direct connection V 200 mm connection cable V 199

200 bott vario Lighting and power Work light with magnetic base 12V / Work light with magnetic base 12/24V LED A B Work light On/off switch H3 bulb Housing with integrated handle and glass lens For 12 V power socket 2.5m spiral power cable LED w Latest LED technology Aluminium housing with carrying handle Protection class IP67 Spiral cable with 12V plug, length 8m 1755 Lumen Illust. Version Power consumption Watt A H x 160 x B LED x 75 x LED battery-operated hand lamp Latest LED technology Li-Ion battery Lamphead can swivel 120 and turn 180 Magnetic lamp socket Retractable hanging hooks Batery life approx. 2.5 hrs. Incl. charger for 12-volt, 24-volt and 230-volt power sockets LED Ø x H mm 51 x

201 bott vario Licht und Energie LED work lamp with charging station Impact-resistant and dustproof Can be recharged from a 12V, 24V or 230V socket With emergency light function, flashing operation possible Lamp head can be swivelled 110 Lighting time 5 hours, with flashing light 10 hours and emergency light function 75 hours Illumination range = 150 m Scope of delivery: Work lamp with battery and 2 front panels (clear and orange), charging station with 230 V connection cable with Euro plug and 12/24 V connecting cable with 12V plug LED 104 x 120 x V EX LED work lamp with explosion protection and charging station For use in EX zone areas 1, 2, 21 and 22, which are potentially subject to gas and dust explosions Impact-resistant plastic Protection class IP64 Lamp head can be swivelled 110 Battery life of the main lamp in conditions of continuous operation is about 5 hours, about 10 hours for flashing operation, and 75 hours for emergency lighting. Illumination range approx. 150m Can be recharged from a 12V, 24V or 230V socket Scope of delivery: Work lamp with battery and 2 front panels (clear and orange), charging station with 230 V connection cable with Euro plug and 12/24 V connecting cable with 12V plug bott vario 104 x 120 x V 201

202 bott vario Lighting and power Socket 12/24 V 12V surface-mounted socket for installation in vehicles Protected against short-circuiting and reverse polarity USB port with a charging current up to 5000 ma (2x2500mA) and automatic voltage reduction from 12/24 V to 5 V Version 1x 12/24 V 35 x 33 x V 3x 12/24 V 95 x 33 x V 2x USB 35 x 33 x V 2 USB, 2x 12/24 V 95 x 33 x V Spiral cable 12V with fuse Safety plug and integrated fuse (8A) Max. cable length = 3 m V 202

203 bott vario Lighting and power 230 V socket strip On/off switch With 5 Schuko sockets 1.6 m power lead 462 x 45 x V 230 V socket strip with MCB / RCD protection and on/off switch With 4 Schuko sockets 1.6 m power lead With on/off switch With 30 ma MCB / RCD protection bott vario 462 x 45 x V 203

204 bott vario Lighting and power 230 V socket strip with external power feed 2 m connecting cable with power inlet and hinged cover as well as an earthing cable for vehicle-side installation With 4 Schuko sockets with a hinged lid With 30 ma MCB / RCD protection On/off switch 2.5 m connecting cable between vehicle power inlet and the external socket Cannot be used in conjunction with an inverter 462 x 45 x V 204

205 bott vario Lighting and power Sine wave inverter 350W Pure sine wave Input voltage = 12 volts Output voltage = 230 volts Continuous output = 350 watts Peak output = 700 watts With USB port for charging small, electronic devices Protected against short-circuiting and overload Incl. connection cable 2 m Only to be connected to a single device Info to permit an insulation fault shutdown, the installation must be performed in accordance with BGI x 199 x V Sine wave inverter 800 W Pure sine wave Input voltage = 12 volts Output voltage = 230 volts Continuous output = 800 watts Peak output = 1600 watts Protected from short-circuiting, overload, overheating, excessive or insufficient battery voltage Incl. connection cable 1.5 m Only to be connected to a single device bott vario Info to permit an insulation fault shutdown, the installation must be performed in accordance with BGI x 165 x V 205

206 bott vario Lighting and power Rear view camera with monitor 12 V Digital 7 (17.8 cm) TFT-LCD monitor in a 16:9 format 2 camera inputs Very good viewing angle (left/right 80, up/down 40 /60 ) High brightness Integrated loudspeaker W 200 x D 29 x 115 mm Coloured spherical camera for installation on vans and transport vehicles Viewing angle 110 High light sensitivity Integrated microphone Weatherproof and waterproof (protection class IP68) W 210 x D 135 x H 50 mm 20 m connection cable V 206

207 207 bott vario

208 bottbox the standard materials box for assembly and logistics 208

209 bott bottbox Applications Workshop Warehouse Assembly workstation Mobile systems High load capacity thanks to re-inforced base and side walls Secure and comfortable carrying due to the ergonomically-shaped front and back grippers Great feel and secure handling thanks to high-quality, finely textured surfaces Easy to clean thanks to smooth insides Robust design thanks to shock-resistant polypropylene, high levels of dimensional stability across all temperatures Stackable even boxes with lids and boxes of varying depths Cases / Boxes 209

210 bott bottbox Transparent hinged lid Transparent viewing window Hopper function Prevents content contamination and ensures safety during mobile use The handle box becomes a storage box with the maximum amount of usable storage thanks to an optional, transparent viewing window Viewing window may also be used to create a hopper, thereby creating ergonomical access at the front of the box whilst retaining the maximum usable volume at the rear of the box Drawer function Optional retaining clips can be fixed to the shelf allowing the box to be used as a drawer Integrated drawer stop device prevents box from falling out 210

211 bott bottbox Label strip Different coloured label strips allow for optional colour coding Options Secure box content separation thanks to reliable divider fixation Option to insert business cardsized warehouse and Kanban cards on the rear 7 different sizes Wide array of applications thanks to 7 different sizes Flexibility thanks to intelligent system dimensions: 2 narrow boxes can be replaced by a wide box ESD versions are available Cases / Boxes 211

212 bott bottbox bottbox kits for bott vario in-vehicle equipment bottbox including viewing window Colour: anthracite grey (RAL7016) Divider kit for shelves, drop-front shelves and bottbox shelves System width mm System depth mm Quantity of boxes W x D mm x V x V x , 1x V x V x , 1x V x , 1x V x V x V x , 2x V x V x , 2x V x , 2x V x V x V x , 3x V x V x , 3x V x , 3x V x V x V x , 4x V x V x , 4x V x , 4x V x V x V x , 5x V x V x , 5x V x , 5x V 212

213 bott bottbox bottbox multi-packs with viewing window Colour: anthracite grey (RAL 7016) Pack quantity 6-48 Description Pack quantity x 100 x x 198 x x 298 x x 298 x x 398 x x 398 x x 498 x bottbox multi-packs without viewing window Colour: anthracite grey (RAL 7016) / Colour ESD: black Pack quantity 6-48 Cases / Boxes Description Pack quantity ESD x 100 x x 198 x x 298 x x 298 x x 398 x x 398 x x 498 x

214 bott bottbox bottbox cross dividers Colour: transparent Material: PC (polycarbonate) Pack quantity 6 For use with bottbox Pack quantity 118 x 6 x , x 6 x , x 6 x , , bottbox viewing window Viewing window may also be used to create a hopper Colour: transparent Material: PC (polycarbonate) Pack quantity 6 For use with bottbox Pack quantity 118 x 12 x , x 12 x , x 12 x , ,

215 bott bottbox bottbox hinged lid For closing bottboxes Material: PC (polycarbonate) Colour: transparent Pack quantity 6 For use with bottbox Pack quantity 253 x 274 x x 374 x x 474 x Cases / Boxes 215

216 bott bottbox bottbox label clip 36 pieces in the selected colour Pack quantity 36 Colour RAL Pack quantity 103 x 11 x traffic yellow x 11 x gentian blue x 11 x signal red x 11 x traffic yellow x 11 x gentian blue x 11 x signal red bottbox label clip 12 pieces / per colour Different coloured label strips allow for optional colour coding Set consisting of all 3 colours traffic yellow gentian blue signal red Pack quantity 36 Colour RAL Pack quantity 103 x 11 x /5010/ x 11 x /5010/

217 bott bottbox bottbox labelling kit Packs of 36 (2x 18 strips) Downloadable label document templates are avaialble free of charge at Pack quantity 36 Version Pack quantity Paper strips Perforated sheets of paper for printing Cases / Boxes 217

218 bott Euroboxes Euroboxes Containers fit standard europallet sizes For all storage, production and transport needs Straight walls offer maximum volume with excellent strength Optional lids available Resistant to numerous acids and alkalis Temperature resistance -20 C to +60 C, short-term up to +90 C Material: Polypropylene Colour: anthracite grey Pack quantity 1-3 Width mm Depth mm Height mm Pack quantity V V V V V Lid for Eurobox (W 400 x D 300 mm) V V V V Lid for Eurobox (W 600 x D 400 mm)

219 bott Aluminium transport cases Aluminium transport cases Load capacity: 35 kg per handle Large-sized handles Snap lock for attaching padlocks Lid with stacking corners with guards Lid with rubber sealing profile on all sides Compatible with europallets External dimensions mm Internal dimensions mm Weight kg Contents Litre 585 x 385 x x 350 x x 385 x x 350 x x 385 x x 350 x x 585 x x 550 x x 585 x x 550 x x 485 x x 450 x x 785 x x 750 x Cases / Boxes 219

220 bott vario Case systems a standard in workshops, vehicles and assembly versatile dividers carrying comfort 220

221 bott vario Case Systems variosort Sturdy small parts storage case Comfortable one-handed operation thanks to a patented locking mechanism Many layout possibilities variocase One system, one standard variosafe Extremely light, robust service case made of aluminium or alternatively sheet steel For workshops, vehicles and construction sites In cabinets, vans and cars Quickly secured in vehicles for fast load securing solutions Securely clip together for safe transportation Carry box with lockable lid Interior compartments created using small parts storage boxes, dividers and die-cut foam inserts Integral latching mechanism allows several cases to be stacked and simultaneously secured together Ergonomic handle for comfortable carrying Sprung catches secure the lid automatically when closed Plastic corner guards Compartments created using small parts storage boxes, dividers and die-cut foam inserts Cases / Boxes 221

222 bott vario In practice 222

223 bott Case systems in practice Cases / Boxes 223

224 bott variosafe case systems variosafe carry box ABS plastic: high strength and low weight Colour: anthracite grey (RAL 7016) - consistent design Securely connects multiple stacked boxes: Effectively creates one container from several to ease transportation Handle position controls case access: Contents are automatically secured and access blocked when case is picked up Optional compartments created using small parts storage boxes, dividers and die-cut foam inserts: structured organisation For storage on guide-rails, on a shelf, or directly between vario endframes: numerous ways to integrate into storage design 224

225 bott variosafe case systems variosafe M with 11 boxes System depth 340 mm 11 boxes Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V variosafe M with 20 boxes System depth 340 mm 20 boxes Load capacity: 15 kg Cases / Boxes Internal dimensions 525 x 340 x x 275 x V 225

226 bott variosafe case systems variosafe L with 18 boxes System depth 340 mm 18 boxes in 2 levels Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V variosafe L with 27 boxes System depth 440 mm 27 boxes in 2 levels Load capacity: 15 kg Internal dimensions 525 x 440 x x 375 x V 226

227 bott variosafe case systems variosafe empty System depth 340 mm Case types M, L and X System depth 340 mm Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V 525 x 340 x x 275 x V 525 x 340 x x 275 x V variosafe empty System depth 440 mm Case type L System depth 440 mm Load capacity: 15 kg W x D x H mm Internal dimensions 525 x 440 x x 375 x V Cases / Boxes 227

228 bott variosafe case systems variosafe M with divider System depth 340 mm 1 divider Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V variosafe L with divider 1 divider Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V 525 x 440 x x 375 x V 228

229 bott variosafe case systems variosafe X with divider System depth 340 mm 1 divider Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V variosafe M with nozzle insert System depth 340 mm With 90 storage holes in a foam inlay Incl. 3 small parts storage boxes Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V Cases / Boxes 229

230 bott variosafe case systems variosafe M with die-cut foam insert System depth 340 mm 12 mm base mat and 63/69 mm thick insert with square perforations Foam: anthracite grey (RAL 7016) Die-cut squares for individual removal Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V variosafe L with die-cut foam insert 12 mm base mat and 63/69 mm thick insert with square perforations Foam: anthracite grey (RAL 7016) Die-cut squares for individual removal Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V 525 x 440 x x 375 x V 230

231 bott variosafe case systems Cases / Boxes 231

232 bott variosafe case systems variosafe M with protective padded insert System depth 340 mm Incl. protective padding for impact-sensitive transport goods Base mat 5 mm, top mat 22 mm Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V 232

233 bott variosafe case systems variosafe X with suspended file frame System depth 340 mm With suspended file frame for file folders DIN 821 Incl. lid bag, office design Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V variosafe X with cable storage insert System depth 340 mm For storing cable reels with max. diameter 250 mm Storage capacity (width) approx. 300 mm Incl. lid bag for tools Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V Cases / Boxes 233

234 bott variosafe case systems variosafe X with aerosol can storage insert System depth 340 mm For 13 aerosol cans with max. diameter 73 mm Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V variosafe X with cartridge storage insert System depth 340 mm For 24 cartridges with max. diameter 53 mm Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V 234

235 bott variosafe case systems variosafe divider Aluminium System depth 340 mm For case type Pack quantity M V L V X V Pack quantity 2 System depth 440 mm For case type Pack quantity L V variosafe die-cut foam insert For use with case type M 12 mm base mat and 63/69mm thick insert with square perforations Foam: anthracite grey (RAL 7016) Die-cut squares for individual removal System depth 340 mm Quantity die-cut mats Die-cut mats x 272 x V x 272 x V System depth 440 mm Quantity die-cut mats Die-cut mats x 372 x V Cases / Boxes 235

236 bott variosafe case systems variosafe X aerosol can storage insert System depth 340 mm A: for 13 aerosol cans with max. diameter 73 mm B: for 24 cartridges with max. diameter 53 mm Anthracite grey RAL 7016 A B Illust. A 393 x 264 x V B 393 x 264 x V variosafe cushion System depth 340 mm For use with case types M, L, X Foam: anthracite grey RAL 7016 Version Cushion V 236

237 bott variosafe case systems variosafe lid bags for office supplies For a system depth of 340 mm For use with case types M, L, X Anthracite grey RAL 7016 Height 276 mm A B C Illust. Version A Lid storage bag V B Office supplies V C Tool supplies V variosafe anti-slip mats For storing sensitive parts Thickness 2.5 mm Material: hard-wearing, tear-resistant PES glass fibre fabric with PVC coating both sides Anti-slip, dimensionally stable, waterproof, oil and fat resistant, washable up to 60 C Colour: anthracite grey (RAL 7016) Pack quantity: 5 pieces Pack quantity 5 System depth mm 395 x 268 x V 398 x 370 x V Cases / Boxes 237

238 bott Case systems accessories variosafe foam insert for manual trimming Clear arrangement of tools Unique definition of storage locations and contents Missing items immediately noticed The user can easily make precise cutouts with a standard cutting tool or a cutter set using simple handles A standard cutting tool or a cutter set Material: Underlay: XPE 33, thickness 5 mm Inlay: PE 30, thickness 22 mm Colour: Underlay: Red Inlay: black Properties: PE 30 laminated, heat-resistant up to 112 C, non-combustible, resistant to oils, petrol and detergents, environmentally friendly For case depth mm 369 x 271 x V 369 x 371 x V Cutter set for foam inlays 3 cutters with protective covers 1x width 20 mm, 1x width 50 mm, 1x semicircular, 20 x 20 x 80 mm Cutter Folding ruler Weight kg 225 x 170 x V 238

239 bott Case systems accessories variosafe vertical holder For securing variosafes in vehicles For use with all variosafes, system width 340 mm For mounting to vehicle floor and wall Max. stacking height 850 mm 450 x 165 x V Sack truck Sturdy aluminium / plastic construction Approx. loading area = W 490 x D 270 mm Folding base and wheels Telescopic handle Incl. bungee cord to secure goods in place Max. load capacity = 125 kg Cases / Boxes Extended Folded 490 x 490 x x 60 x V 239

240 bott variosort case systems variosort service case Comfortable one-handed operation thanks to a patented locking mechanism High-quality plastic housing with transparent lid: view of contents, reduces search times Inner compartment with small parts boxes or foam inlays: clear and adjustable organisation Profiled base and lid: secure case stacking Rounded-off edges to protect users and sensitive surfaces Can be securely connected together with variosafe Load capacity: 15 kg variosort with 11 boxes System depth 340 mm 11 small parts storage boxes Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V 240

241 bott variosort case systems variosort with 20 boxes System depth 340 mm 20 small parts storage boxes Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V variosort with 28 boxes System depth 340 mm 28 small parts storage boxes Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V Koffer / Boxen 241

242 bott variosort case systems variosort with die-cut foam insert System depth 340 mm 12 mm base mat and 63/69mm thick insert with square perforations Foam: anthracite grey (RAL 7016) Die-cut squares for individual removal Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V variosort with nozzle insert System depth 340 mm With 90 storage holes in a foam inlay Incl. 3 small parts storage boxes Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V 242

243 bott variosort case systems variosort empty System depth 340 mm Load capacity: 15 kg Internal dimensions 525 x 340 x x 275 x V variosort storage pocket Anodised aluminium holder variosort service case not included 95 x 335 x V Cases / Boxes 243

244 bott variosort case systems variosort with 15 small parts storage boxes System depth 340 mm Load capacity: 10 kg Internal dimensions 354 x 323 x x 237 x V variosort with storage pocket Anodised aluminium holder Load capacity. 10 kg 362 x 61 x V 244

245 bott variocase case systems variocase service case Anodised aluminium: low weight with surface protection Alternatively: sturdy, powder-coated sheet steel, colour: anthracite grey (RAL 7016) Intelligent structural folds: very high stability Ergonomic handle for comfortable carrying Sprung catches secure the lid automatically when closed: safety Plastic corner guards: protects valuable surfaces when put down Optional compartments created using small parts storage boxes, dividers and die-cut foam inserts: structured organisation Cases / Boxes 245

246 bott variocase case systems variocase S with 11 boxes System depth 340 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 284 x x 250 x V variocase S with 21 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 359 x x 325 x V 246

247 bott variocase case systems variocase M with 11 boxes System depth 340 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 284 x x 250 x V variocase M with 17 boxes System depth 340 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 284 x x 250 x V Cases / Boxes 247

248 bott variocase case systems variocase M with 13 boxes System depth 340 mm Load capacity: 15 kg Material: Anodised aluminium Internal dimensions 446 x 359 x x 325 x V variocase M with 21 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium or powder-coated steel RAL 7016 Internal dimensions 446 x 359 x x 325 x V Sheet steel design: 446 x 359 x x 325 x V 248

249 bott variocase case systems variocase M with 28 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 359 x x 325 x V Cases / Boxes 249

250 bott variocase case systems variocase L with 40 boxes System depth 440 mm Load capacity: 25 kg Aluminium or sheet steel design Internal dimensions 446 x 359 x x 325 x V Sheet steel design: 446 x 359 x x 325 x V variocase L with 32 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 359 x x 325 x V 250

251 bott variocase case systems variocase X with 32 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 359 x x 325 x V variocase X with 40 boxes System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 359 x x 325 x V Cases / Boxes 251

252 bott variocase case systems variocase M with dividers and cross dividers System depth 340 mm 4 cross dividers / 2 dividers Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 284 x x 250 x V variocase with dividers and cross dividers System depth 440 mm 4 cross dividers / 2 dividers Load capacity: 25 kg Aluminium or sheet steel design inkl. Incl. 4x Cross Steckwände, dividers, 2x Internal 2x Trennwände Dividers dimensions 446 x 359 x x 325 x V 446 x 359 x x 325 x V 446 x 359 x x 325 x V Sheet steel design: 446 x 359 x x 325 x V 446 x 359 x x 325 x V 446 x 359 x x 325 x V 252

253 bott variocase case systems Cases / Boxes 253

254 bott variocase case systems variocase M empty System depth 340 mm Load capacity: 25 kg Material: Anodised aluminium Internal dimensions 446 x 284 x x 250 x V variocase empty System depth 440 mm Load capacity: 25 kg Material: Anodised aluminium Type Internal dimensions M 446 x 359 x x 325 x V L 446 x 359 x x 325 x V X 446 x 359 x x 325 x V 254

255 bott variocase case systems variocase die-cut foam insert 12 mm base mat and 60 mm thick insert with square perforations Foam: anthracite grey (RAL 7016) Die-cut squares for individual removal Not suitable for case size S System depth 340 mm Base mat Die-cut mats 437 x 275 x x 251 x V System depth 440 mm Base mat Die-cut mats 437 x 350 x x 326 x V variocase holder for size M Anodised aluminium variocase service case not included System depth mm 95 x 334 x V 95 x 409 x V Cases / Boxes 255