Or d e r i ng In f o r m at i o n...page 4. sanitary Weld Fit ti ng s...pages Polished fittings for permanent installations

Transcription

1 Fittings & Clamps

2 Or d e r i ng In f o r m at i o n...page 4 Industry Cross Reference Guide...page 5 s-line Fit ti ng s...pages 9-2 Sanitary, Clamp-to-Clamp Fittings featuring the S-Clamp quick-disconnect union sanitary Weld Fit ti ng s...pages Polished fittings for permanent installations tube O. D. Weld Fit ti ng s...pages 27-0 Non-Polished fittings for permanent installations i-line Fit ti ng s...pages -8 Sanitary, Clamp-to-Clamp Fittings featuring the heavy-duty, I-Line quick-disconnect union sanitary Bevel Se at Fit ti ng s...pages 9-50 Sanitary Fittings featuring the bevel and nut union sanitary Q-Line Fit ti ng s...pages 5-55 Sanitary Fittings featuring the heavy-duty Q-Line, quick-disconnect, face-to-face union, Sch 5 I.P.S. Sch e d u le Fit ti ng s...pages S-Line Ferrules, Gaskets, dapters, Clamps I-Line Ferrules, Gaskets, Clamps hang e rs...pages Durable piping supports for controlled areas mi s c e l l a n e o u s Fit ti ng s...pages 6-66 Spools, Flange dapters, "Camlock", Pipe to Tube dapters John Perry, septic Fittings, Sweep Elbows fr i c t i o n Lo s s Ch a r t...page 67

3 High Quality For Superior Weldability and Fit Up WCB-Flow Products quality means dependable concentricity and dimensional correctness. WCB-Flow Products fittings fit and weldability is assured. Committment to Quality and Excellence in Manufacturing and Customer Service s a major supplier of Stainless Steel Fittings, Valves, Pumps and Process Equipment, WCB-Flow Products has established a record of precision engineering and quality manufacturing. WCB-Flow Products has a long-standing reputation for excellence in Technical and Customer Service. We re Close Technical and Customer Services are based in our Buffalo, New York facility, where we maintain large inventories of the fittings you need. We re More Responsive Standard parts have expedited delivery though 7:00 p.m. EST, Monday-Thursday, 6:00 p.m EST Friday No extra fees for overnight fittings shipments. Our Customer Service and pplications Engineers are available to answer your questions.

4 To specify the part completely, start with the description and select the additional options as shown below. Be sure to denote the material and polish combination. See the example below. Model Number Example 2 4 2CMP " 6L Description 2CMP- 90 Elbow /2 /4 ¼8 /2 7 ¼ ¼8 2 ¼2 5 ¼8 6 5 ¼ ¼6 2 Polish Combinations 7 Polished I.D. and O.D. Inside diameter is mechanically polished to 2Ra or 80 Grit finish. Outside diameter is mechanically polished with polish marks blended. Polished I.D. and Unpolished O.D. Outside diameter is mill or tumbled finish. Unpolished I.D. and Unpolished O.D. Both I.D. and O.D. are mill or tumbled finish. /2" /4" " /2" 2" 2 /2" " 4" 6" 8" 0" 2" 4 Material* T04 Stainless Steel T6L Stainless Steel *ll Fractional Fittings are T6L Stainless Steel. Notes The Dimension Tables ll Dimensions are in inches. Wall Thickness: Fittings /2"-.0" sizes are manufactured with 6 gauge (0.065") wall thickness. The 4.0" tube size are manufactured with 4 gauge (0.08") wall thickness. The 6.0" & 8.0" tube size are manufactured with 2 gauge (0.09") wall thickness. 4

5 Industry Cross reference GUIDE WCB-Flow lfa Laval DIXON ndron VNE TOPLINE Swagelok Products (Tri-Clover) (BRDFORD) CLMP ELBOWS, TEES, ND CROSSES 2CMP C2SX EG2C 2CMP B2CMP JC2 B2CMP 2FMP-4 C2F4 EG2FPR 2FMP-4 2FMP-4 JC2-4 B2FMP-4 2FMP-5 C2F5 EG2FTR 2FMP-5 2FMP-5 JC2-5 B2FM-5 2FMP- EG2C-PR 2FMP- 2FMP- JC CMP-MP C2C EG2C- SCMP- 2CMP- JC2-J --- MP MP 2EMP EG2-FPR 2EMP 2E-MP 2E-JC --- 2KMP C2KSX EG2K 2KMP B2KMP JC2K --- 7MP C7 EG7 7MP B7MP JC7 B7MP 7MPS 7MPS B7MPS JC7S --- 9MP C9 EG9 PMP B9MP JC9 B9MP CLMPS MHHM-7 PWMHHM MHHM-H MHHM MHHM JCHD MHHM-DP PMHHM CH MHHM LH MHM JCHC MHHM PMHHS MHHS MHHS JCHS MHHM-P MHP CHP MHP MHP MHP JCHP MHP KLH EG MHL MHL MHL MO MO CLMP FERRULES, CPS, ND DPTERS L4M7 C4 EG4M7 L4M7 L4M JC4M7 L4M7 4MPHR C4HR EG4RT 4MPHR 4MPHR JC4HR 4MPHR 4MPHT C4HT EG4HT 4MPHT 4MPHT JC4HT 4MPHT 4RMP EG4RT 4RMP 4RMP JC4EX 4RMP 4WMP C4X EG2CS 4WMP 4WMPS JC4X 4WMP 4MPW C4H EG4W 4MPW 4MPW JC4H 4MPW 4WLMP C4WL EG4WL 4WLMP 4WLMP JC4 4WLMP 6MP C6 EG6 6MP 6MP JC6 6MP 7MP-4 EG7PR 7MP-4 7MP-4 JC7-4 7MP-4 7MP-5 EG7TR 7MP-5 7MP-5 JC7-5 7MP-5 2MP C2 EG2 2MP 2MP JC2 2MP 22MP C22 EG22 22MP 22MP JC22 22MP 2BMP C2B EG2B 2BMP 2BMP JC2B 2BMP K WMP JC4XR --- 5

6 WCB-Flow lfa Laval DIXON ndron VNE TOPLINE Swagelok Products (Tri-Clover) (BRDFORD) CLMP REDUCERS -4MP C EGCC -4MP B-4MP JC B-4MP PMP EGPC PMP PMP J4-C B4-C MPP EGCP MPP MPP JC-4 B-4 TMP EGTC TMP TMP J5-C B5-C MPT EGCT MPT MPT JC-5 B-5 2-4MP C2 EG2CC 2-4MP B2-4MP JC2 G2-4MP 2PMP EG2PC 2PMP 2PMP J4-C2 B4-C2 2MPP EG2CP 2MPP 2MPP JC2-4 B2-4 2TMP EG2TC 2TMP 2TMP J5-C2 B5-C2 2MPT EG2CT 2MPT 2MPT JC2-5 B2-5 BEVEL SET ELBOWS, TEES & CROSSES 2C 2C 2C 2C 2C 2C B2C 2E 2E 2E 2E 2E 2E B2E 2F 2F 2F 2F 2F 2F B2F 2F- 2F- 2F- 2F- 2F- 2F F-2 2F-2 2F-2 2F-2 2F-2 2F K 2K 2K 2K 2K 2K B2K 2P 2P 2P 2P 2P 2P B2P B B7 7B 7B 7B 7B 7B 7B B7B B B9 BEVEL SET NUTS FERRULES, CPS & DPTERS H H H H H H H L HR 4HR 4HR 4HR 4HR 4HR 4MHR 4HT 4HT 4HT 4HT 4HT 4HT 4MHT 4PRF 4WF 4RP --- 4PRF 4WF 4PRF 5 5 EG L HR 5HR 5HR 5HR 5HR 5HR 5MHR 5HT 5HT 5HT 5HT 5HT 5HT 5HT 5TRF 5WF 5TR --- 5TRF 5WF 5TRF B 2B 2B 2B 2B 2B 2B B B22 2F B4-9 22F

7 WCB-Flow lfa Laval DIXON ndron VNE TOPLINE Swagelok Products (Tri-Clover) (BRDFORD) BEVEL SET REDUCERS TP TP TP TP TP TP BTP TT TT TT TT TT TT BTT -4F -4F -4F -4F -4F -4F B-4F -5F -5F -5F -5F -5F -5F B-5F 2-4F 2-4F 2-4F 2-4F 2-4F 2-4F B2-4F 2-5F 2-5F 2-5F 2-5F 2-5F 2-5F B2-5F -9F -9F F -9F -9F F -8F F -8F -8F --- SNITRY WELD ELBOWS 2CW 2S E2S L2S L2S J2S B2S 2TW 2C E2T --- L2C J2C B2T 2CKW C2C E2C --- L2CM J2CM B2CM 2FW 2F E2F L2F L2F J2F B2FP 2KW 2KS E2KS L2KS L2KS J2KS B2KS 2KT 2K E2KT L2K --- J2K B2KT 2KP 2P EK2P L2P --- J2P B2KP 2WU 2WU E2WU L2WU 2WUL J2WU B2WUL SNITRY WELD TEES & CROSSES 7W 7W E7WWW L7WWW B7WWW J7W B7WWW 7WWT --- E7WWT L7WWT --- J7WWT B7WWT 7WWK --- E7WWC L7WWM B7WWM J7WWM B7WWM 7WTW --- E7WTW L7WTW --- J7WTW B7WTW 7WKW --- E7WCW L7WTW --- J7WMW B7WMW 7WTT --- E7WTT L7WTT --- J7WTT B7WTT 7WKK --- E7WCC L7WMM --- J7WMM B7WMM 7TTW --- E7TTW L7TTW --- J7TTW B7TTW 7MMW --- E7CCW L7MMW --- J7MMW B7MMW 7WR 7WR E7RWWW L7RW B7RWWW J7WR B7WR 9W 9W E9WWWW L9WWWW B9WWWW J9W B9WWW SNITRY WELD REDUCERS W W EWW L L J BW P --- EPW LP LP JP BP KW --- ECW LMP LM JM BM 2W 2W E2WW L2 L2 J2 B2W 2P --- E2PW L2P L2P J2P B2P 2KW --- E2CW L2PMP L2M L2M B2M TUBE O.D. WELD FITTINGS (UNPOLISHED) B2WC 2SX V2WC 2WCL 2WCL J2SX B2WCL B2WK 2KSX V2WK 2WK 2WK J2KSX B2WK B2WU 2WU --- 2WUL 2WUL J2WU B2WUL B7W 7W V7W 7W B7WWW J7W B7WR 7WR V7WR 7WR B7RWWW J7WR --- B9W 9W V9W 9W B9WWWW J9W --- B9WR 9WR --- 9WR --- J9WR --- B9W 9W 9WB 9WB 9WB J9W B9WB B28W 28W E28W W J28W B28W BW W VW W L JW BW 7

8 WCB-Flow lfa Laval DIXON ndron VNE TOPLINE Swagelok Products (Tri-Clover) (BRDFORD) TUBE HNGERS K24FCF FCF TH 24H E24 SP24G B24FCF J24FCF B24RG 26CB THP 24HP D24FCF J24PVC B24P8 I-LINE FITTINGS 2CI --- EC2 --- HDI-2C --- B2CI 2FI --- E2FI --- HDI-2F --- B2FI 2EI --- E2EI --- HDI-2E --- B2EI 2KI --- E2KI --- HDI-2K --- B2KI 2PI --- E2PI --- HDI-2P --- B2PI 7I --- E7I --- HDI B7I 7I --- E7I B7I 7BI --- E7BI B7BI 9I --- E9I B9I IS --- EIS IS HDI--UD IS IL I IU WI Y4WI E4WI 4WI HDI-4W 4WI 4WI 5WI Y5WI E5WI 5WI HDI-5W 5WI 5WI 4WLI Y4WLI E4WLI 4WLI WLI 5WLI Y5WLI E5WLI 5WLI WLI 7-4I-5I --- E7-4I-5I I-5I 7-5I-5I --- E7-5I-5I I-5I 7-4I-4I --- E7-4I-4I I-4I 7-4I-4MP --- E7-4I I-4MP 4MP 7-4I-5I --- E7-4I-5I I-5I 7-5I E7-5I I-4 7-5I-5I --- E7-5I-5I I-5I 7-5I-4MP --- E7-5I I-4MP 4MP 6I-4I Y6I-4I E6I-4I 6I-4I HDI-6-4 6I-4I 6-I-4I 6I-5I Y6I-5I E6I-5I 6I-5I HDI-6-5 6I-5I 6I-5I BI-4FI --- EI-4I --- HDI--4F --- BI-4I BI-5FI --- EI-5I --- HDI--5F --- BI-5I B2I-4FI --- E2I-4I --- HDI-2-4F --- B2I-4I B2-5FI --- E2I-5I --- HDI-2-5F B2I-5I B2I-5FI --- E2I-5I --- HDI-2-5F B2I-5I 8

9 S-Line Fittings WCB-Flow Products S-Line versatile fittings were originally designed for both COP (clean-out of-place) and CIP (clean-inplace) applications. The WCB-Flow Products S-Line union is leak proof and free of crevices and also consist of two matching ferrules, a gasket, and a clamp. Utilizing these unions into a process piping system will ensure easy assembly and disassembly of process lines and equipment. The union is compact, which makes possible closer nesting of lines and more efficient use of production space. S-Line Fittings are available with a variety of I.D. and O.D. polishes or unpolished, in T04 or T6L Stainless Steel and in half-inch through 2" sizes. vailable in ½ through 2 Fittings are made of T04 & T6L stainless steel. Finishes are available in any standard combination. ID polish is 2Ra and Unpolished OD polish is 2Ra and Unpolished Electropolished S-Line Fittings are offered. Gaskets are available in Buna, EPDM, Teflon, FKM, and Silicone as a standard. Meets and FD requirements. 9

10 S-Line Elbows Note: ll /2" & /4" available in T6L only. ll dimensions are in inches. 2CMP 90 ELL 2KMP 45 ELL /2 /4 /2 25 /2 /4 5 /8 2 /2 2 /4 2 /2 2 /2 4 / /8 6 0 / /8 /4 /2 /8 /2 7 /6 2 /4 2 /2 2 /6 2 /8 4 /8 6 5 / /8 2FMP-4 90 ELL B 2 2 /6 /2 2 /4 2 /2 2 /2 2 /2 2 /2 4 /4 4 9 /2 5 5 / /8 7 7 /2 2FMP-5 90 ELL B 2 2 /6 /2 2 /4 2 /2 2 /2 2 /2 2 /2 4 /4 4 9 /2 5 5 / /8 7 7 /2 0

11 S-Line Tees & Crosses Note: ll /2" & /4" available in T6L only. ll dimensions are in inches. 7MP TEE B /2 /4 2 /2 /4 2 /8 4 /4 2 /8 4 /4 /2 2 /4 5 /2 2 /2 7 2 /2 /2 7 /4 7 /2 4 4 / / /8 9 /4 9MP CROSS B /2 /4 2 /2 /4 2 /8 4 /4 2 /8 4 /4 /2 2 /4 5 /2 2 /2 7 2 /2 /2 7 /4 7 /2 4 4 / /2 7ERMP & 7RMP REDUCING TEE B C /4 x /2 2 5 /8 5 /4 2 5 /8 x /2 2 5 /8 5 /4 2 5 /8 x /4 2 5 /8 5 /4 2 5 /8 /2 x /2 2 7 /8 5 /4 2 7 /8 /2 x /4 2 7 /8 5 /4 2 7 /8 /2 x 2 5 /2 4 5 /6 7 /8 2 x /2 2 9 /6 5 /8 2 /8 2 x /4 2 9 /6 5 /8 2 /8 2 x 2 9 /6 5 /8 2 /8 2 x /2 2 9 /6 5 /8 2 /2 2 /2 x / /2 5 /6 2 /8 2 /2 x / /2 5 /6 2 /8 2 /2 x 2 27 /2 5 /6 2 /8 2 /2 x / /2 5 /6 2 2 /2 2 /2 x /2 5 /6 2 /6 x /4 /2 6 /6 2 5 /8 x /2 6 /6 2 5 /8 x /2 /2 6 / /2 x 2 /6 6 /6 /2 x 2 /2 /2 6 /6 /2 4 x 4 /6 8 /8 /8 4 x /2 4 /6 8 /8 /2 4 x 2 4 /6 8 /8 9 /2 4 x 2 /2 4 /6 8 /8 9 /2 4 x 4 /6 8 /8 9 /2 6 x 5 7 /8 /4 5 /4 6 x /8 /4 5 /2

12 7RMPS TEE SHORT OUTLET B C /4 x /2 5 /4 2 5 /8 5 /6 x /2 5 /4 2 5 /8 /6 x /4 5 /4 2 5 /8 /6 /2 x /2 5 /4 2 7 /8 5 /6 /2 x /4 5 /4 2 7 /8 5 /6 /2 x 4 /8 2 /6 5 /6 2 x /2 5 /8 2 9 /6 9 /6 2 x /4 5 /8 2 9 /6 9 /6 2 x 5 /8 2 9 /6 9 /6 2 x /2 5 /8 2 9 /6 9 /6 2 /2 x /2 5 / /2 /6 2 /4 x /4 5 / /2 /6 2 /2 x 5 / /2 /6 2 /2 x /2 5 / /2 /6 2 /2 x 2 5 / /2 /6 x /2 6 /6 /2 2 /6 x /4 6 /6 /2 2 /6 x 6 /6 /2 2 /6 x /2 6 /6 /2 2 /6 x 2 6 /6 /2 2 /6 x 2 /2 6 /6 /2 2 /6 4 x /2 8 /8 4 /6 2 9 /6 4 x /4 8 /8 4 /6 2 9 /6 4 x 8 /8 4 /6 2 9 /6 4 x /2 8 /8 4 /6 2 9 /6 4 x 2 8 /8 4 /6 2 9 /6 4 x 2 /2 8 /8 4 /6 2 9 /6 4 x 8 /8 4 /6 2 9 /6 6 x 4 /4 5 7 /8 /6 9RMP REDUCING CROSS B C D /4 x /2 2 5 /8 5 /4 2 5 /8 2 5 /8 x /2 2 5 /8 5 /4 2 5 /8 2 5 /8 x /4 2 5 /8 5 /4 2 5 /8 2 5 /8 /2 x /2 2 7 /8 5 /4 2 7 /8 2 7 /8 /2 x /4 2 7 /8 5 /4 2 7 /8 2 7 /8 /2 x 2 5 /2 4 5 /6 2 5 /2 7 /8 2 x 2 9 /6 5 /8 2 9 /2 2 /8 2 x /2 2 9 /6 5 /8 2 9 /2 2 /2 2 /2 x 2 27 /2 4 /4 2 5 /6 2 /4 2 /2 x / /2 5 /6 2 5 /6 2 2 /2 2 /2 x /2 5 /6 2 5 /6 2 /6 x /2 6 /6 / 2 5 /8 x /2 /2 6 /6 / 2 29 /2 x 2 /2 6 /6 / /6 x 2 /2 /2 6 /6 / /2 4 x 4 /6 8 /8 4 /6 /8 4 x /2 4 /6 8 /8 4 /6 /2 4 x 2 4 /6 8 /8 4 /6 9 /6 4 x 2 /2 4 /6 8 /8 4 /6 9 /2 4 x 4 /6 8 /8 4 /6 9 /2 6 x 5 7 /8 /4 5 7 /8 5 /4 6 x /8 /4 5 7 /8 5 /2 2

13 S-Line Ferrules Note: vailable in No. 7 polish only. ll dimensions are in inches. 4MPW WELDING FERRULE TNK SPUD (HEVY) B C 5 /8 7 /8 5 /2 /2 5 /8 /8 /64 2 /4 7 /8 2 /6 2 /2 /4 2 / /64 /6 2 7 /8 7 /2 4 2 /8 5 /64 4 /4 4RMP Ferrule Roll-On /4 /2 /8 2 5 /6 2 /2 /8 7 /6 4 /2 4WMP SHORT WELDING FERRULE /2 /2 /4 /2 /2 /2 /2 2 /2 2 /2 /2 /2 4 5 /8 6 7 /8 8 7 /8 0 7 /8 2 7 /8 4WLMP BUTT WELDING FERRULE /2 2 2 / L4M7 Welding Ferrule Tank Spud (light) /2 /8 /4 /8 /8 /2 /8 2 /8 2 /2 /8 /8 4 /8 6 /2 8 /2 0 /2 2 /2

14 S-Line dapters Note: vailable in No. 7 polish only. ll dimensions are in inches. 4MPHR RUBBER HOSE DPTER /2 x /4 /2 /2 x /8 /2 4MPHT TYGON HOSE DPTER /2 /4 /4 /4 /2 /2 /4 x /4 /2 /4 x /8 /2 /4 x /2 /2 /4 /2 x /2 /2 x /4 /2 /6 /2 x /2 /2 /2 x /4 /2 /2 x /6 /2 / /6 2 x /8 2 /2 2 x /4 2 /2 2 x /8 2 /2 2 /2 2 /2 /2 4 / /2 /2 4 /2 2 4 /2 2 /2 4 /2 4 / /8 6 4 /2 8 4 /2 7MP-4 Bevel to S-line dapter /2 2 2 /2 /2 / MP-5 Bevel Ferrule to S-line dapter /6 /2 2 /2 2 2 /2 2 /2 27 /2 29 /2 4 2 /2

15 S-Line Caps Note: vailable in No. 7 polish only. ll dimensions are in inches. 6MP SOLID END CP /2 x /4 2 / /2 2 /2 /6 9 /6 4 4 / / / / /6 6MP-SG Sight Glass / /2 2 /2 /6 9 /6 4 4 /6 2BMP Cap (Thermometer) B 2 /2-4 /2 2 / /2 /4-4 2 /2 /6 /4-4 9 /6 / /6 /4-4 Note: The 2BMP Cap can also be used as a substitute for reducing #22MP i.e. - x /2, /2 x /4 through 4 x /4. *Other threads are available. S-Line DPTERS Note: ll /2" & /4" available in T6L only. ll dimensions are in inches. 2MP DPTER S-Line X MNPT /2 x /8 2 /2 x /4 2 /2 x /8 2 /2 x /4 2 /2 2 /4 x /8 2 /4 x /4 2 /4 x /8 2 /4 x /2 2 /4 2 /8 x /2 2 x /4 2 /8 2 /4 /2 x /2 2 /2 x /4 2 /8 /2 x 2 /4 /2 2 7 /6 2 x /2 2 2 x /4 2 /2 2 x 2 7 /6 2 x /2 2 7 / /2 2 /2 9 /2 2 /2 x /2 /2 4 /6 22MP DPTER S-Line X FNP /2 x /8 /4 /2 x /4 /2 /2 x /8 /2 /2 x /4 5 /8 /2 /2 /4 x 7 /8 /4 /4 x /4 /2 /4 x /8 /2 /4 x /2 /2 /4 5 /8 x /2 2 x /4 2 /8 5 /8 /2 x /2 2 /2 x /4 5 /8 /2 x 5 /8 /2 5 /8 2 x /2 2 2 x /4 2 /2 2 x 5 /8 2 x /2 5 /8 2 2 /2 2 /2 2 /2 2 /2 x 2 2 /2 2 / /8 See also: 2BMP Cap 5

16 S-Line Reducers Note: ll /2" & /4" available in T6L only. ll dimensions are in inches. -4MP CONCENTRIC REDUCER /4 x /2 2 x /2 /8 x /4 /8 /2 x /2 /4 /2 x /4 /8 /2 x /8 2 x /8 2 x /2 /8 2 /2 x /2 /8 2 /2 x 2 /8 x /2 4 5 /8 x /8 x 2 /2 4 5 /8 4 x 2 4 /4 4 x 2 /2 4 /4 4 x 4 /4 6 x 0 /8 6 x 4 0 /2 8 x 6 2 /4 2-4MP ECCENTRIC REDUCER /4 x /2 2 x /2 x /4 2 /2 x /2 5 /2 x /4 4 /2 x 2 x 5 2 x /2 2 /2 x /2 5 2 /2 x 2 x /2 7 x 2 5 x 2 /2 4 x 2 9 /8 4 x 2 /2 7 /8 4 x 5 /8 6 x 0 /8 6 x 4 0 /2 28BMP TRUE Y 6 /2 2 /2 /4 2 /2 /2 /2 /2 2 4 /2 2 /2 5 /2 6 / /8 6 8 /4 28MP Y-BRNCH 45 B C D 7 5 /2 /2 5 /2 /2 8 /8 6 /6 /6 6 /6 2 9 /4 7 5 /8 2 /8 7 5 /8 2 / /4 9 /8 2 /8 9 / /6 2 /6 5 /6 28IMP INSPECTION ELBOW B 2 7 /2 2 /2 2 9 /6 2 /4 2 /4 /2 2 /2 /8 4 / /8 6 5 /6

17 S-Line Clamps Pressure Ratings: Clamp vs. Union Which is the Critical Value to pply? Some manufacturers display pressure ratings of their clamp. But the clamp alone is not the critical value to apply. The Clamped Union is the critical element for evaluating pipeline pressure capacity. The Gasket is the weakest part of the Union. Clamps alone will always be rated to higher pressure and yet will not reflect the true pressure capacity of the piping system. Be certain your pressure ratings are for the Union - not just the clamp. Example: MHP High Pressure Clamp Maximum Maximum Pressure of the Pressure of the 70 F 70 F /2",220 psi,500 psi 2" 900 psi,000 psi 2 /2" 720 psi,000 psi " 600 psi,000 psi 4" 570 psi,000 psi } The Difference: 280 psi-40 psi in overstated pressure capacity! clamped union consists of: Two Ferrules, One Gasket, and One Clamp For safe, correct design, evaluate your selections using the pressure ratings of the clamped union and choose WCB-Flow Products clamps for quality and dependability. 7

18 S-Line heavy duty Clamps SINGLE PIN HIGH POLISH SINGLE PIN TUMBLED POLISH DOUBLE PIN MKE TUMBLED POLISH -SEGMENT TUMBLED POLISH MHHM /2" - 2" T04 & T6 PMHHM /2" - 6" T04 PWMHHM " - 4" T04 PMHHS " - 4" T04 /2 & / / / *lso available in " to 6" Schedule 5 Pipe s. Pressure Ratings of the Union Maximum Maximum Pressure Pressure SizE T 70 F at 250 F /2 & /4,500 psi,200 psi & /2 500 psi 250 psi psi 250 psi 2 /2 400 psi 200 psi 50 psi 50 psi psi 25 psi 6 50 psi 75 psi 8 00 psi 50 psi 0 75 psi 40 psi Note: For pressure not listed contact factory. See Fittings Price List and Ordering Information on page 4 for additional clamp offerings. 8

19 S- Line Clamps S-Line LIVE LOD NUT MHP HIGH PRESSURE CLMP Strong, cast 04SS clamp with SS hex screws and silicone bronze nuts to prevent galling. T04 & T6 available /2-4 /2 & /4.05 & / / For pressure ratings see below mhp Pressure Ratings of the Union Maximum Maximum Pressure Pressure SizE T 70 F at 250 F /2 & /4,500 psi,200 psi /2,220 psi,00 psi psi 80 psi 2 /2 720 psi 660 psi 600 psi 550 psi psi 525 psi 6 00 psi 200 psi Note: Pressure ratings are based on the following parameters: Nominal wall thickness (.065.5"-",.08 4"), use of elastomer type gasket*, weld ferrules, properly aligned and assembled joints (nuts torqued to 20 ft. lb.) and the absence of water hammer or shock loads. Remember, use the Clamped Union pressure rating above for safe, correct pipeline design. Pressure ratings of the clamp alone are generally higher yet do not take into account the full clamped assembly with gasket. PTFE gaskets are not recommended for use with MHP clamps. Consult factory for Solid PTFE and PTFE Envelope Gasket information. Higher pressure ratings for the clamp alone are available upon request. MHHMLL LIVE LODED CLMP NUT Maintains a constant tightening force on clamped unions. Used especially with Teflon (PTFE) gaskets. Teflon (PTFE) is chemically inert and so preferred in many applications. However, when a connection using a Teflon (PTFE) gasket is heated up and then cooled, it will leak. The metal expands when it is heated, which compresses the gasket. When the system is cooled, the metal contracts, but the Teflon (PTFE) does not return to its original size (no memory) and the connection leaks. The Live Loaded nut fits on standard S-Line clamps (5/6" - 8 thread). This nut consists of a two-piece outer housing, in which is contained a quantity of specially constructed springs. When the nut is tightened to 50 inch pounds on the clamp, the springs in the nut are compressed. s the product line is heated and cooled, the spring pressure maintains a constant force on the clamp to keep the gasket sealed between the two ferrules. The Live Loaded nut can be purchased as a separate item to retrofit existing clamps. Ordering Information: Clamps When ordering please specify Model* MHHM MHP *PWMHHM PMHHM PMHHS Description Blank: O.D. Tubing SCH5: Pipe s (where available) The above format is used for all WCB-FP clamps. Note: MHHMLL Live Loaded Clamp Nuts are sold separately from clamps. *Please refer to the price pages for Puriti Clamp Information. 9

20 S- Line Gaskets WCB-Flow Products Sanitary S-Line Gaskets are available in many basic designs in a variety of materials that are non-toxic and resistant to contact media. Information on general service characteristics of gasket materials will be furnished upon request. 40MP Standard-Molded, one-piece o-ring gaskets are economical and meet the FD requirements for use in food products (2CFR ). Part Description s vailable 40MP-U 40MP-X Buna (HYCR) Silicone Material 40MP-E EPDM** /2" - 2" Tube or Pipe 40MP-G 40MP-Y Solid PTFE (TEFLON - See below) (for all parts) FKM (Fluorel) 40MPF Flanged-Molded o-ring gaskets with a special rim that snaps on and stays in position. vailable from stock, -2". Not for use with MHP clamps. Part Description s vailable 40MPF-U Buna (HYCR) Material 40MPF-SFY FKM (Fluorel) /2" - 2" Tube or Pipe 40MPF-E EPDM** (for all parts) 40MPF-X Silicone 40MP-GR Envelope gasket has a PTFE* outer shell sandwiching an elastomer rubber insert. Part Description Material s vailable 40MP-GR PTFE* Outer Jacket Envelope with: No Suffix = BUN Insert Suffix V = VITON Insert /2" - 2" Tube or Pipe Suffix E = EPDM Insert (for all parts) Suffix WV = WHITE FKM * (PTFE) Poly Tetra Fluoro Ethylene, (MHHMLL Live Loaded Clamp nuts recommended) **Ethylene Propylene Diene Monomer VITON and TEFLON are trademarks of the E.I. DuPont DeNemaurs Company 20

21 Ordering Information: S-Line Gaskets When ordering please specify Model Number Example MP-FE 2" * EPDM Part # Description 2 4 Material BUN EPDM VITON TEFLON SILICONE * Be sure to include the appropriate material suffix i.e. 40MP-FE (Flanged EPDM) * Designation Blank: O.D. Tubing SCH5: Pipe s Special Note Concerning The Limited Use of PTFE Gaskets: Pressure Service Ratings shown on pages 8 & 9 for S-Line Clamps Do Not pply to connections utilizing PTFE material gaskets. s PTFE material by nature is virtually incompressible and tends to cold flow under normal operating conditions. PTFE gaskets, have significant lower holding pressures when used with any standard clamp. Unreinforced PTFE is not recommended for use at temperatures above 200 F (9 C). To avoid possible leakage problems, please contact WCB-Flow Products before considering the use of PTFE material. Please refer to our MHHMLL - LIVE LODED CLMP NUT which is designed to maintain a constant force on the clamp to prevent leakage as the line is heated and cooled. NOTE: PTFE gaskets are not recommended for use with MHP Clamps. 2

22 Sanitary Weld Fittings WCB-Flow Products Sanitary Weld fittings are in use around the world in dairies, distilleries, breweries, food processing plants and cosmetics wherever product purity and corrosion resistance are important. These fittings are also utilized in process piping systems where COP is not required or where CIP can be accomplished. Weld fittings also are available in /2" and /4" tube O.D. sizes in 6SS as shown in our BPE Fittings Data Sheet DS-60. SME BPE fittings are also available to use with the latest automatic welding equipment. These fittings can be welded manually or with automatic machines. Weld fittings are utilized to eliminate unnecessary joints and dead leg zones for product to become entrapped. vailable in ½ through 2 Fittings are made of T04 & T6L stainless steel. Finishes are available in any standard combination. ID polish is 2 Ra OD polish is 2 Ra Electropolished weld fittings are available upon request. Meets and FD requirements. 22

23 Sanitary Weld Elbows For /2" & /4" size fittings, see the DS-60 BPE Fittings Data Sheet. ll dimensions are in inches. 2CW 90 Tube Bend 2 /6 /2 2 5 /6 2 4 /6 2 /2 5 /6 6 5 / /6 6 8 /4 2CKW 90 ELL B 2 /6 2 9 /6 /2 2 5 /6 7 /6 2 4 /6 4 9 /6 2 /2 5 /6 5 /6 6 5 /6 6 / /6 8 5 /6 2KKW 45 ELL B /6 /6 /2 2 /8 5 /8 2 2 /6 2 5 /6 2 /2 /2 4 /6 / /6 4 /6 2KW 45 Tube Bend /6 /2 5 / /6 2 /2 /6 4 4 /6 6 7 /2 Sanitary Weld sweep elbows 2FW & 2TW 90 SWEEP ELBOW B 2 /6 2 /4 /2 2 5 /6 5 /8 2 4 / /2 2 /2 5 /6 6 /2 6 5 /6 7 / /6 9 7 /2 2KT & 2KP 45 SWEEP ELBOW B /6 7 /8 /2 5 /8 2 5 / /6 /2 2 /2 27 /2 /6 4 5 /8 4 4 /6 6 /2 2

24 Sanitary Weld Tees, Crosses & LTERLS For /2" & /4" size fittings, see the DS-60 BPE Fittings Data Sheet. ll dimensions are in inches. 7W B /8 2 /4 /2 2 /2 5 /6 2 2 /6 4 /8 2 /2 2 /2 4 /6 2 9 /2 5 /6 4 7 /6 6 7 / WWK TEE WITH S-LINE BRNCH CLMP SIZE B C /8 2 /4 5 /8 /2 2 /2 5 /6 2 5 /2 2 2 /6 4 /8 2 9 /6 2 /2 2 /2 4 / /2 2 9 /2 5 /6 /2 4 7 /6 6 7 /8 4 /6 7WR, 7ERWWK, 9RWWWW B C /2 x 2 /2 5 /6 /8 2 x 2 /6 4 /8 5 /8 2 x /2 2 /6 4 /8 29 /2 2 /2 x 2 /2 4 /6 7 /8 2 /2 x /2 2 /2 4 / 2 5 /2 2 /2 x 2 2 /2 4 /6 2 5 /6 x 2 9 /2 5 /6 2 /8 x /2 2 9 /2 5 /6 2 /2 x /2 5 /6 2 9 /6 x 2 /2 2 9 /2 5 /6 2 9 /2 4 x 7 /6 6 7 /8 2 5 /8 4 x /2 7 /6 6 7 / /2 4 x 2 7 /6 6 7 /8 /6 4 x 2 /2 7 /6 6 7 /8 /2 4 x 7 /6 6 7 /8 /2 6 x /4 6 x /8 24 7WR 7ERWWK 9RWWWW 7WWT TEE WITH BRNCH THREDED SIZE B C /8 2 /4 /6 /2 2 /2 5 /6 2 /8 2 2 /6 4 / /2 2 /2 2 /2 4 /6 /6 2 9 /2 5 /6 /2 4 7 /6 6 7 /8 4 2 /6 9W Cross B /8 2 /4 /2 2 /2 5 /6 2 2 /6 4 /8 2 /2 2 /2 4 /6 2 9 /2 5 /6 4 7 /6 6 7 /

25 Sanitary Weld Tees, Crosses & LTERLS For /2" & /4" size fittings, see the DS-60 BPE Fittings Data Sheet. ll dimensions are in inches. 28WWW 45 LTERL B C D 5 /8 /6 /2 /8 /2 4 /8 4 9 /6 7 /8 /2 2 5 /8 5 /8 4 2 /2 6 5 /8 6 /8 5 /8 5 8 /2 7 /4 2 6 /2 4 0 /2 9 /8 2 /8 8 /8 28IWWK INSPECTION ELBOW B /6 /8 /2 2 5 /6 /8 2 4 /6 5 /8 2 /2 5 /6 7 /8 6 5 /6 2 / /6 2 /4 28BWWW TRUE WYE / /

26 Sanitary Weld REDUCERS For /2" & /4" size fittings, see the DS-60 BPE Fittings Data Sheet. ll dimensions are in inches. W Concentric Reducer /2 x 2 /8 2 x 2 /8 2 x /2 2 /8 2 /2 x 2 /8 2 /2 x /2 2 /8 2 /2 x 2 2 /8 x 5 /4 x /2 5 /8 x 2 5 /8 x 2 /2 5 /8 4 x 2 5 /8 4 x 2 /2 5 /8 4 x 5 /8 6 x 9 6 x 4 9 WC Concentric Reducer /2 x 2 2 x 4 2 x /2 2 2 /2 x 6 2 /2 x /2 4 2 /2 x 2 2 x 8 x /2 6 x 2 4 x 2 /2 2 4 x 2 4 x /2 0 4 x x 2 /2 6 4 x 4 6 x 6 6 x 4 4 2W Eccentric Reducer /2 x 2 2 x 4 2 x /2 2 2 /2 x 6 2 /2 x /2 4 2 /2 x 2 2 x 8 x /2 6 x 2 4 x 2 /2 2 4 x 2 4 x /2 0 4 x x 2 /2 6 4 x 4 6 x 9 6 x 4 9 K, 2K, P, 2P CONCENTRIC REDUCER B C /2 x 2 / x 4 / x /2 2 / /2 x 6 / /2 x /2 4 / /2 x 2 2 / x 8 / x /2 6 / x 2 4 / x 2 /2 2 / x 2 5 / x /2 0 5 / x / x 2 /2 6 5 / x 4 5 / K P 2K 2P

27 Tube O.D. Weld Fittings Tube OD weld fittings are utilized in a wide variety of industrial and non-sanitary applications where corrosive environments are more of a concern than sanitation. Utilizing these fittings ensures a permanent, rigid, and chemical resistance process system. WCB-Flow Products Tube O.D. Butt-Weld Fittings are ideal for reliable, on-site fabrication of stainless steel process lines not requiring sanitary polish. lternate finishes available upon request. vailable in /2 through 2 Fittings are made of T04 & T6L stainless steel. Unpolished tumble finish Tube O.D. Weld Elbows ll dimensions are in inches. B2WC 90 ELBOW B2WK 45 ELBOW B2WU /2 /4 /2 9 /2 /2 /2 /4 /8 /2 /2 2 /4 2 2 /2 /4 4 / /4 5 /2 5 /8 /2 5 /6 2 /4 2 /2 9 /6 7 /8 4 2 /2 6 /4 /4 2 /4 /2 4 / /2 7 /

28 Tube O.D. Weld Tees & Crosses ll dimensions are in inches. B7W B /2 /4 /2 /4 7 /8 /4 7 /8 /4 /2 2 /4 4 / /2 6 /4 6 /2 4 7 /8 7 / B7WR C B /4 x /2 7 /8 2 /4 x /2 7 /8 /2 2 /4 x /4 7 /8 2 2 /4 /2 x /4 2 /4 2 /4 4 /2 /2 x 2 /4 2 /8 4 /2 2 x 2 /8 6 2 x /2 2 /2 6 2 /2 x /2 2 /4 6 2 /2 x 2 /4 6 x /2 /4 6 /2 x 2 /4 /2 6 /2 x 2 /2 /4 /4 6 /2 4 x 2 7 /8 4 7 /4 4 x 2 /2 7 /8 /4 7 /4 4 x 7 /8 /4 7 /4 6 x 5 4 /4 0 6 x /8 0 6 x /4 0 B9W B /2 /4 /2 /4 7 /8 /4 7 /8 /4 /2 2 /4 4 / /2 6 /4 6 /2 4 7 /8 7 / Tube O.D. Lap-Joint Connection ll dimensions are in inches. Lap-Joints utilize a weld-on, stub-end ferrule, and a back-up flange. Often used on vessels and heat-exchange equipment, lap-joints adapt tubing to flange connections. B4W Stub End Lap-Joint O.D. B C /2 /8 5 /8.098 /4 /8 / /8 2.0 /2 /4 2 7 /8.0 2 /2 5 /8.0 2 /2 2 4 /8.0 2 / /8 6 / /2.28 To be used with B8W Tube O.D. Back up Flange, following page. 28

29 Tube O.D. BCK UP Flanges Note: vailable in No. polish only. ll dimensions are in inches. B8W - 04 Stainless Steel Back-Up Flange Outside Diameter Bolt Circle Inside Diameter Thickness Bolt Hole Diameter Tube B C D E No. of Bolt Holes /2 /2 2 /8 9 /6 /8 /4 7 /8 2 /4 /6 /8 5 /8 4 5 /8 4 5 /8 4 5 /8 4 /4 4 /4 4 /4 4 /4 8 4 /4 /8 /6 /8 /2 5 7 /8 9 /6 / /4 2 /6 7 /6 2 /2 7 5 /2 2 9 /6 7 /6 7 /2 6 /6 / /2 4 /6 /2 6 9 /2 6 /4 /2 7 /8 8 Use with the B4W Stud-End Lap-Joint, see previous page. Tube O.D. Weld Cps ll dimensions are in inches. B6W /2 /4 /4 5 /6 /8 /2 9 /6 2 /4 2 /2 /4 4 /2 6 2 /4 29

30 Tube O.D. Weld dapters ll dimensions are in inches. B9W MNPT to Weld dapter /2 /2 9WBF FNPT TO WELD DPTER /2 /4 /4 5 /8 /4 /4 /4 /2 /4 2 /6 2 /2 2 5 /6 2 / /6 6 4 Tube O.D. Weld Laterals Note: ll dimensions are in inches. Reducing, other sizes and configurations upon request. Tube O.D. Weld Reducers ll dimensions are in inches. /8 /2 /2 2 7 /6 2 /2 /4 7 /8 4 5 / /2 B28W Lateral 45 B C /2 5 6 / /2 /6 6 /6 7 /8 2 5 /8 7 /8 8 /4 2 /2 /2 8 /2 0 7 /8 8 7 /8 0 /4 4 2 /6 0 /4 2 /6 BW Concentric Reducer 0 O.D. x /4 2 /8 /2 x /4 2 /8 /2 x 2 /8 2 x 2 /8 2 x /2 2 /8 2 /2 x /2 2 /8 2 /2 x 2 2 /8 x /2 5 /8 x 2 5 /8 x 2 /2 5 /8 4 x 2 5 /8 4 x 2 /2 5 /8 4 x 5 /8 6 x 9 6 x 4 9 BWC Concentric Reducer /2 x 2 2 x 4 2 x /2 2 2 /2 x 6 2 /2 x /2 4 2 /2 x 2 2 x 8 x /2 6 x 2 4 x 2 /2 2 4 x 2 4 x /2 0 4 x x 2 /2 6 4 x 4 6 x 5 /2 6 x 4 5 /2 B2W Eccentric Reducer O.D. x /4 /2 x /4 /2 x 2 2 x 4 2 x /2 2 2 /2 x /2 4 2 /2 x 2 2 x /2 6 x 2 4 x 2 /2 2 4 x x 2 /2 6 4 x 4 6 x 9 6 x 4 9 NOTE: 4" and smaller available "no tangent" only.

31 I-Line Fittings These are the original Cherry Burrell I-Line fittings and are made up of interlocking flat face ferrules, a flat gasket and a clamp. This interlocking, metal-to-metal design eliminates over compression by the clamp not allowing the gasket to be extruded into the product zone. I-Line fittings can withstand higher vibrations, temperatures and pressures than other available connections available. vailable in through 8 Fittings are made of T04 & T6L stainless steel. Finishes are available in any standard combination. ID polish is 2Ra OD polish is 2Ra Electropolished I-Line Fittings are available. Gaskets are available in Buna, EPDM, Teflon, FKM, an Silicone as a standard. Meets requirements Compressed Decompressed Gasket is compressed and fixed amount without hold up cavities. Metal-to-Metal stop controls gasket extrusion to the bore line. Eliminates liquid hold up and hard to clean pockets, while reducing pressure drop. Greater metal cross section for a robust ferrule, resists damage due to handling. Ideal for heavy duty applicators and vibration resistance.

32 I-Line Elbows Note: ll dimensions are in inches. 2CI 90 Elbow Both Ends Female 2 /2 2 7 /8 2 /4 2 / /2 5 7 /8 4 8 /6 6 0 /8 2FI 90 Elbow One End Male Other End Female B 2 /6 /2 2 7 /8 2 /6 2 /4 5 /2 2 / /2 4 7 /2 5 7 /8 5 9 /6 4 8 /6 7 /4 6 0 /8 9 /6 2EI 90 Elbow Both Ends male /6 /2 2 /6 2 5 /2 2 /2 4 7 /2 5 9 /6 4 7 /4 6 9 /6 2 2KI 45 Elbow Both Ends Female 5 /6 /2 2 /2 2 2 /8 2 /2 2 5 /8 /8 4 4 / /8 2PI 45 Elbow One End Male Other End Female B 5 /6 /8 /2 2 /2 7 /2 2 2 /8 7 /8 2 /2 2 5 /8 2 5 /6 /8 /8 4 4 /4 5 / /8 4 9 /6 8" available on Special Order. Other configurations on request.

33 I-Line Tees & Crosses Note: ll dimensions are in inches. 7I 9I 7I Tee & 9I cross ll ends Female /6 /2 2 / /2 2 /2 /6 / /2 6 6 /4 7RI Reducing Tee ll ends Female SIZE B C /2 x 2 9 /6 5 / /2 2 x /2 6 /6 7 /2 2 x /2 /2 6 /6 7 /2 2 /2 x /2 5 /2 6 5 /6 2 /2 2 /2 x 2 5 /2 6 5 /6 4 9 /2 x 2 25 /2 7 9 /6 4 /6 x 2 /2 25 /2 7 9 /6 4 /2 4 x 2 / /2 9 9 / /2 4 x 4 25 /2 9 9 /6 5 /6 I-Line Ferrules - male Note: ll dimensions are in inches. 4WI-cb Ferrule, Male, Welding 9 /2 /2 / / /2 /2 29 /2 4 /2 6 /6 8 /6 4WHI Ferrule, Male, Welding (Heavy Wall) B C 5 /6.870 /4 /2 7 /6.70 /6 2 / /4 2 /2 7 / /4 / /6 4 / / / / / /64 4WLI Ferrule, male, Welding, Long 9 /6 /2 27 /2 2 2 /6 2 /2 2 /6 2 /8 4 2 /6 6 /6 8 /6 8" available on Special Order. Other configurations on request.

34 I-Line Ferrules - Female Note: ll dimensions are in inches. 5WI-CB Ferrule, female, Welding 25 /2 5 /2 /6 2 /2 2 /2 5 /2 7 /2 4 /2 6 /8 8 /8 5WHI Ferrule, female, Welding (Heavy Wall) B C /2.870 /4 /2 5 /8.70 /6 2 / /4 2 /2 / /4 / /6 4 2 / / / /2 5WLI Ferrule, female, long True 5 /8 /4 /2 2 / /6 2 /2 2 /2 2 / I-Line dapters No. 7 polish only. ll dimensions are in inches. 4HRI Male to Rubber Hose dapter /6 /2 5 / /2 2 /2 2 /8 /6 4 5 /2 4HTI Male to tygon tube adapter 4 /6 /2 4 9 /2 2 4 /2 2 /2 4 /6 5 /6 4 5 /6 5HRI FeMale to Rubber Hose dapter 7 /8 /2 / /6 2 /2 2 /6 / /2 5HTI female to tygon tube adapter 4 /4 /2 4 5 /2 2 4 /4 2 /2 5 /8 5 /8 4 5 /2 4 8" available on Special Order. Other configurations on request.

35 I-Line Caps Note: ll dimensions are in inches. 6I-4I Cap Male 2 / /8 2 /2 5 /6 7 / /8 6 7 /2 8 9 /2 6I-4ISG Sight Glass Male 2 / /8 2 /2 5 /6 7 / /8 6 7 /2 8 9 /2 *crylic, maximum temperature: 95 F 6I-5I Cap Female 2 / /8 2 /2 5 /6 7 / /8 6 7 /2 8 9 /2 2BI Thermometer Cap Male B* /2-4NPT 2 /2 /4-4NPT 2 2 /4-4NPT 2 5 /8 2 /2 /4-4NPT 5 /6 /4-4NPT 7 /8 4 /4-4NPT 4 7 /8 *Other taps are available 8" available on Special Order. Other configurations on request. 5

36 I-Line dapters No. 7 polish only. ll dimensions are in inches. 7-4I-4I dapter Male by Male True /2 /6 /2 /2 2 9 /6 2 /2 /6 /6 4 2 /6 7-4I-4MP dapter Male by S-Line (L4M). /2 /2 27 /2 2 7 /8 2 /2 5 / /8 7-4I-5I dapter Male by FeMale True 5 /8 /2 /2 2 /2 2 /6 2 /2 /2 2 /2 4 2 /2 7-5I-5I dapter FeMale by FeMale True /4 9 /6 /2 7 /8 2 2 /6 2 /2 2 5 /6 2 7 /6 4 2 /6 7-5I-4MP dapter female by S-Line (L4M) 9 /2 /2 2 /2 2 2 /8 2 /2 2 /4 2 5 / /6 2FI-4I dapter Male By Male NPT x /2 2 /2 x /4 2 /2 x 2 /4 /2 x /4 2 7 /8 /2 x /2 2 /6 2 x /6 2 /2 x 2 / /2 x /2 4 x 4 /4 6 8" available on Special Order. Other configurations on request.

37 I-Line dapters No. 7 polish only. ll dimensions are in inches. 2I-5I dapter FeMale By Male NPT x /2 2 7 /2 x /4 2 7 /2 x 2 7 /6 /2 x /4 /6 /2 x /2 2 /8 2 x /6 2 /2 x 2 /2 5 /2 x /2 4 x 4 9 /6 22FI-4I dapter Male By female NPT x /2 2 5 /2 x /4 2 9 /2 x 7 /8 /2 x /4 /4 /2 x /2 27 /2 2 x 2 29 /2 2 /2 x 2 /2 2 9 /2 x 2 5 /2 4 x /8 22FI-5I dapter female By female NPT x /2 2 2 /2 x / /2 x 2 /6 /2 x /4 7 /6 /2 x /2 2 /2 2 x 2 2 /6 2 /2 x 2 /2 2 9 /2 x 2 25 /2 4 x /2 I-Line Reducers No. 7 polish only. ll dimensions are in inches. I-4FI Concentric reducer Both Ends Male I-5FI Concentric reducer Large End Male, Other End Female /2 x 5 /6 2 x /2 /4 2 /2 x 2 /8 x 2 4 /6 x 2 /2 4 /4 4 x 4 29 /2 /2 x /8 2 x /2 /2 2 /2 x 2 9 /2 x 2 5 /8 x 2 /2 7 /6 4 x 5 2 /2 28I Lateral ll Ends Male B 7 9 /6 5 2 /2 /2 9 /4 7 /8 2 0 /6 8 5 /2 2 /2 2 7 /6 9 2 /2 /6 0 /2 4 5 /2 2 /2 6 9 /8 5 5 /8 28BI true y ll Ends Male 8" available on Special Order. Other configurations on request. 25 /2 /2 5 /6 2 5 /2 2 /2 5 5 /2 7 7 /2 4 9 /2 6 9 /8 7

38 I-Line Clamps Rugged and dependable, designed for heavy duty applications and built to last. Made from cast 04 stainless steel in three basic styles. See page 0 for Ordering Information. IS I IU Wingnut Tightened Clamp vailable in "-4" sizes Bolted Clamp vailable in "-6" (6" has two bolt connection) Bolted, Unpolished Clamp vailable in "-8" (6"-8" has two bolt connection) Pressure Ratings: I-Line Clamped Unions Clamp P.S.I. Service Rating Tube O.D. Temp. " /2" 2" 2 /2" " 4" 6" Heavy 70 F I, IU & 250 F *6" available in I and IU only. gaskets WCB-Flow Products Sanitary I-Line Gaskets are available in a variety of materials that are non-toxic and resistant to contact media. Information on general service characteristics of gasket materials will be furnished upon request. Part Description Material s vailable 40IH BUN "-8" 40IV VITON "-8" 40IE EPDM "-8" 40IT TEFLON "-8" 40IX SILICONE "-8" WCB-Flow Products I-line gaskets are specially designed to not extrude into the interior diameter of the tubing when the clamp is tightened. 8 8" available on Special Order. Other configurations on request.

39 Bevel Seat Fittings WCB-Flow Products Bevel Seat Fittings are precision engineered and manufactured from stainless steel. Bevel Seat connections are made up of a plain bevel ferrule mating to a threaded bevel ferrule with a threaded hex nut. These fittings are designed and manufactured to withstand daily disassembly, COP (clean-out-of-place), and reassembly of process lines and equipment. gasket can be used to ensure a positive shutoff under higher pressures, however is not necessary in lower pressure applications. vailable in through 4 Fittings are made of T04 & T6L stainless steel. Finishes are available in any standard combination. ID polish is 2 Ra OD polish is 2 Ra Gaskets offered in Buna as a standard. Meets requirements Bevel Seat Elbows ll dimensions are in inches, No. 7 Sanitary Finish. 2C 90 SWEEP ELL 2 /2 2 5 /6 2 2 /2 2 / / /2 4 8 /6 2E 90 SWEEP ELL 2 /2 2 5 /6 2 2 /2 2 / / /2 4 8 /6 9

40 Bevel Seat Elbows ll dimensions are in inches, No. 7 Sanitary Polish. 2F 90 SWEEP ELL 2 /2 2 5 /6 2 2 /2 2 / / /2 4 8 /6 2F- 90 concentric Reducing elbow (non-tapered) B /2 X 2 /6 2 /6 2 X 2 /8 2 /6 2 X /2 2 7 /8 2 5 /6 2 /2 X / /2 2 5 /6 2 /2 X 2 2 /2 2 /2 X 2 7 /78 2 /6 X /2 2 /2 2 5 /6 X 2 2 /2 2 /2 X 2 /2 4 5 /2 4 9 /2 4 X 2 5 /6 2 /6 4 X /2 /6 2 5 /6 4 X 2 /6 2 /2 4 X 2 /2 4 9 /6 /4 4 X 5 5 /6 5 7 /6 2f-2 90 Eccentric Reducing elbow (non-tapered) 2K 45 Elbow 5 /6 /2 2 /2 2 2 /8 2 /2 2 5 /8 /8 4 4 /4 2P 45 ELL B 5 /6 2 /8 /2 2 /2 2 /8 2 2 /8 2 5 /6 2 /2 2 5 /8 2 9 /6 / /2 4 4 /4 7 /8 40

41 bevel seat tees & crosses 7 & 7B TEE B C /6 5 /8 2 /6 /2 2 /2 4 /6 / /2 5 9 /6 /6 2 /2 /6 6 /8 4 /4 7 /2 7 /6 4 5 / /2 9 5 /6 6 /8 7 TEE 7B TEE 9 CROSS & 7 - TEE B /6 5 /8 /2 2 /2 4 / /2 5 9 /6 2 /2 /6 6 /8 7 /2 7 / /2 9 5 /6 9 CROSS 7 TEE 9 CROSS B C D /6 5 /8 2 /6 4 /2 /2 2 /8 4 /4 / / /2 5 9 /6 /6 6 9 /2 2 /2 /6 6 /8 4 /4 7 7 /6 / /8 8 / /2 9 5 /6 6 / /2 Can be supplied with more than one end having a captive nut. 4

42 Bevel Seat Ferrules ll dimensions are in inches. 4 FERRULE PLIN RECESSED /4 7 /2 /8 2 /2 2 /2 /6 /8 4 /4 4R FERRULE Plain Roll-On /4 /2 2 2 /2 4 4 FERRULE Plain /8 /2 /2 2 /2 2 /2 /4 /4 4 /4 4PRF FERRULE Short welding /6 /2 /6 2 2 / /2 /2 5 /6 4 42

43 Bevel Seat adapters ll dimensions are in inches, No. 7 Sanitary Polish. 4W Plain ferrule tank spud (heavy) B 2 /8 5 /2 /2 2 7 /2 2 / /2 2 /6 2 /2 /6 2 /6 7 /2 7 / /6 4 /4 4HR Rubber Hose dapter 7 /8 /2 7 / /2 2 /2 2 /6 7 / /2 4WL Plain ferrule Tank Spud (Light) 2 /2 2 /4 2 2 /2 2 /2 2 / HT Tygon hose adapter 4 /6 /2 4 2 / /2 2 / / / /2 4

44 Bevel Seat Ferrules ll dimensions are in inches, No. 7 Sanitary Polish. 5 Threaded Recessed Ferrule /6 7 /2 /8 2 /2 2 /2 /8 /4 4 /8 5R Threaded Roll-On Ferrule /6 /2 2 /8 2 /2 /8 /8 4 /8 5 Threaded Tube Ferrule /8 /2 /2 2 /2 2 /2 /4 /4 4 /4 5TRF Threaded Ferrule, short Welding /6 /2 /6 2 2 / /2 /2 5 /6 4 44

45 Bevel Seat Ferrules and dapters ll dimensions are in inches, No. 7 Sanitary Polish. 5W threaded ferrule, tank spud (heavy) B /2 /4 /2 5 /8 /4 2 /4 2 5 /6 2 /2 /4 2 7 /8 /6 /8 4 2 /8 4 /4 5HR Rubber Hose dapter 7 /8 /2 7 / /2 2 /2 2 /6 7 / /2 5WL Threaded Ferrule Tank Spud (Light) 2 /2 2 /4 2 2 /2 2 /2 2 / HT Tygon HOse adapter 4 /6 /2 4 2 / /2 2 / / / /2 Bevel Seat Caps 6 CP 2B THERMOMETER CP 5 /6 /2 27 /2 2 2 /8 2 / /2 7 /6 4 4 /2 5 /6 /2 27 /2 2 2 /8 2 / /2 7 /6 4 4 /2 " tapped /2" NPT other sizes are tapped /4" NPT. 45

46 bevel seat tube assemblies TUBE SSEMBLIES NO. 7C NO. 7D NO. 7E /8 2 7 /8 2 7 /8 /2 7 /6 /8 /8 2 7 /6 /8 /8 2 /2 /6 /4 /4 /6 7 /8 7 / /6 4 5 /8 4 5 /8 NOTE: Minimum lengths 7C 7D 7E 7F 7G 7H REDUCING TUBE SSEMBLIES NO. 7F NO. 7G NO.7H NO. 7K /2 x /8 /8 /2 4 5 /6 2 x 7 /6 7 /6 9 /2 5 /8 2 x /2 5 /2 5 /2 /8 5 /8 2 /2 x 5 /2 5 /2 9 /6 5 /6 2 /2 x /2 /2 /2 2 /2 5 /6 2 /2 x 2 /2 /2 2 /2 5 /6 x 7 /2 7 /2 25 /2 6 /6 x /2 9 /6 9 /6 7 /8 6 /6 x 2 9 /6 9 /6 7 /8 6 /6 x 2 /2 /6 /6 29 /2 6 /6 4 x 5 /8 5 /8 4 9 /2 8 /8 4 x /2 2 /2 2 /2 4 /8 8 /8 4 x 2 2 /2 2 /2 4 /8 8 /8 4 x 2 /2 25 /2 25 /2 4 /2 8 /8 4 x 27 /2 27 /2 4 7 /6 8 /8 NOTE: Minimum lengths 7K 46

47 Bevel Seat Ferrules and dapters ll dimensions are in inches, No. 7 Sanitary Polish. 2 Threaded 5W ferrule to male npt adapter 2 /4 /2 2 7 / /2 2 /2 9 /2 /2 4 / W & Nut to male NPT adapter 2 29 /2 /2 2 5 /6 2 2 /2 5 /8 4 5 / /2 22 Female NPT to 5TRF adapter /6 /2 /6 2 5 /6 2 /2 2 7 /6 2 5 /8 4 Bevel Seat Wrenches W & Nut to FEmale NPT adapter 2 /2 /2 2 / /2 2 /2 /4 27 / /2 wrenches (aluminum) Part No. Description 79-25H Wrench - Hex Union Nut - " H Wrench - Hex Union Nut - /2" 79-25H Wrench - Hex Union Nut - 2" H Wrench - Hex Union Nut - 2 /2" H Wrench - Hex Union Nut - " H Wrench - Hex Union Nut - 4" H Wrench - Double End - /2" x " H Wrench - Double End - 2" x /2" H Wrench - Double End - 2" x " 79-8 W25HX Wrench - Pocket - /2" 79-9 W25HX Wrench - Pocket - 2" 25 25H W25HX 47

48 Bevel Seat Nuts H Union Nut, HEX B /6 29 /2 /2 2 /2 /2 2 /6 2 /2 9 /2 /6 4 /6 9 / /6 2 /2 bevel seat reducing elbows, laterals & true wyes 28 LTERL WYE B C D 7 /8 5 /6 /6 5 /6 /2 8 /4 6 7 /8 7 /8 6 7 / / /2 2 7 / /2 2 /2 25 /2 9 /2 2 7 /6 9 /2 2 5 /8 9 /6 2 /6 9 /6 4 4 /6 /4 /6 /4 28B TRUE Y /6 /2 2 / /2 2 / / / /2 48

49 bevel seat reducers -4F CONCENTRIC & ECCENTRIC DPTER REDUCER /2 x 4 /4 2 x 4 25 /2 2 x /2 4 7 /6 2 /2 x / /2 2 /2 x /6 x /2 6 /4 x /2 x 2 /2 6 /2 4 x 2 /2 6 5 /2 4 x 6 9 /6 2-4F CONCENTRIC & ECCENTRIC DPTER REDUCER /2 x 4 /2 2 x 6 /2 2 x /2 4 7 /6 2 /2 x /2 6 9 /6 2 /2 x 2 4 /4 x /2 8 5 /8 x 2 6 /6 x 2 /2 5 /6 4 x 2 /2 9 /8 4 x 7 7 /2-5F CONCENTRIC & 2-5F ECCENTRIC REDUCER DPTER /2 x /2 2 x 5 /2 2 x /2 7 /6 2 /2 x /2 5 9 /6 2 /2 x 2 9 /6 x /2 7 5 /8 x /8 x 2 /2 /4 4 x 2 /2 8 /6 4 x 6 /8-5F 2-5F 49

50 -8F REDUCER DPTER (Sanitary Plain Ferrule hex nut to female NPT) /2 x 4 /6 2 x 6 /6 2 x /2 4 /2 2 /2 x /2 6 5 /2 2 /2 x 2 4 /8 x /6 x 2 / /2 4 x 2 /2 9 5 /2 4 x 7 /2-9F REDUCER DPTER (Sanitary Plain Ferrule to male NPT) /2 x * 4 5 /2 2 x 6 5 /2 2 x /2 4 5 /2 2 /2 x /2 6 9 /2 2 /2 x 2 * 4 2 /2 x /2 x 2 * /2 5 7 /2 4 x 2 /2 9 7 /2 4 x 7 2 /2 * Hex nuts supplied on these sizes. TP DPTER - REDUCER (CONCENTRIC) 2TP DPTER - REDUCER (ECCENTRIC) /2 x 4 /2 2 x 6 /2 2 x /2 4 7 /6 2 /2 x /2 6 9 /6 TP 2 /2 x 2 4 /4 2 TP x /2 8 5 /8 x 2 6 /6 x 2 /2 5 /6 4 x 2 /2 9 /8 4 x 7 7 /2 TT DPTER - REDUCER (CONCENTRIC) 2 TT DPTER - REDUCER (ECCENTRIC) /2 x /8 2 x 5 /2 2 x /2 /2 2 /2 x /2 5 7 /2 2 /2 x 2 9 /6 TT x /2 7 5 /8 2 TT x /2 x 2 /2 25 /2 4 x 2 / /2 4 x 5 5 /6 50

51 Q-Line Fittings ll dimensions are in inches. WCB-Flow Products Q-Line Quick Clamp fittings are a more robust version of the S-Line. With thicker, beefier ferrules, Q-Line fittings are ideal for rough environments. The face-to-face design and quick disconnect clamp allow easy line assembly or dismantling. Q-LINE ELBOWS 2CQ 90 DEGREE 2kq 45 DEGREE 2 /2 /2 2 /6 2 /6 2 /2 4 /6 5 7 / /2 /2 /2 2 2 /6 2 /2 2 /2 2 / /2 5

52 q-line tees & hose ferrules 7Q TEE B 2 /8 4 /4 /2 2 /4 5 /2 2 /2 7 2 /2 /2 7 /4 7 / /6 8 5 /8 7XQ TEE B 2 /2 4 /6 /2 2 /6 5 5 /8 2 /6 7 5 /8 2 /2 4 /6 9 /8 5 7 /6 0 7 / HRQ RUBBER HOSE BRB 2 /2 /2 / /8 2 /2 25 /2 7 / /2 4HTQ TYGON HOSE DPTER 4 /2 4 / /2 2 / /2 5 /2 4 5 /2 52

53 Q-Line ROLL ON & WELD FERRULES 4RQ - UNION FERRULE /6 /2 /6 2 7 /8 2 /2 4 4WQ Welding ferrule Short Shank 7 /2 9 /2 /6 2 /6 2 5 /2 /6 5 /6 4 4WLQ Welding ferrule Light Wall, Long Shank /4 /2 2 / /6 2 /2 2 /2 2 /6 4 4WHQ Welding ferrule Heavy Wall B /2 /4 /2 5 /8 /6 2 /4 2 /4 2 /2 /4 2 /4 /6 5 /6 4 2 /8 4 /4 5

54 Q-Line Caps & PIPE DPTERS ll dimensions are in inches. 6Q-4Q Solid Cap Only 2 / /8 2 /2 5 /6 7 / /8 6QSG Transparent Cap Sight glass for tee or cross 2 / /8 2 /2 5 /6 7 / /8 crylic. maximum temperature rating: 95 F 2Q DPTER 2 9 /2 /2 2 5 / /8 2 /2 /4 7 /6 22Q DPTER 29 /2 /2 /2 2 2 /4 2 /2 2 /6 2 /6 Q-Line THERMOMETER CP & REDUCERS 2BQ Thermometer Ferrule I.P. Threaded 2 / /8 2 /2 5 /6 7 / /8 " tapped /2" NPT, /2"" thru 4" tapped /4" NPT. 54 Q-4FQ CONCENTRIC REDUCER /2 x 5 /2 2 x /2 /4 2 /2 x /2 7 /8 2 /2 x 2 4 /8 x 2 5 /8 x 2 /2 5 /2 4 x 2 /2 5 9 /6 4 x 5 9 /6 2Q-4FQ ECCENTRIC REDUCER /2 x /2 2 x /2 /8 2 /2 x /2 5 /2 2 /2 x 2 /4 x 2 5 /4 x 2 /2 7 /8 4 x 2 /2 7 5 /6 4 x 5 5 /6

55 Q-Line Clamps ll dimensions are in inches. Rugged and dependable, designed for heavy duty applications and built to last. Made from cast 04 stainless steel in three basic styles, See page 0 for Ordering Information. IS I QT Wingnut Tightened Clamp vailable in "-4" sizes Bolted Clamp vailable in "-6" (6" has two bolt connection) Hinged, -Piece Clamp For light duty applications djusting, latch screw closure "-4" See page 49 Pressure Ratings for IS and I Clamps See page 0 for Clamp Ordering Information Pressure Ratings: I-Line Clamped Unions P.S.I. Service Rating Tube O.D. Clamp Temp. " /2" 2" 2/2" " 4" 6" Heavy 70 F * I, IU & 250 F * *I and IU only. Shown on page F F Service Ratings are based on hydrostatic tests using standard elastomer gaskets, properly assembled joints, and no shock pressure. Please refer to PTFE statement. Q-Line Gaskets ll dimensions are in inches. For quick Clamp Fittings Part Description Material vailable 40QH BUN "-4" 40QS Silicone "-4" 40QT Teflon "-4" 55

56 I.P.S. Schedule Fittings I.P.S. (International Pipe ) vailable in schedules 5 and 0, as standard, other wall thicknesses upon request WCB-Flow Products offer these in S-Line and I-Line. I.P.S. S-Line s " - 6" vailable in 04 and 6L Standard Finish unpolished S-Line Ferrules 4WMP-5 FERRULE SIZE B C /2 / / /2 2 / / / / /8 L4M7V SIZE B C /8 / / /8 2 / / / / /2 4WLMPV SIZE B C / / MPV.944 / /

57 S-Line Gaskets vailable in standard, flanged, teflon envelope and in various elastomers, P/N 40 MPV (Identify elastomer). S-Line dapters See Miscellaneous section - "IPS dapters" (Page 6) S-Line Clamps PIPE SIZE DESCRIPTION PRT NUMBER DIMENSION () MHHM-5 " /2 MHHM-5 /2" MHHM-5 2" /2 MHHM-5 2 /2" MHHM-5 " MHHM-5 4" MHHM-5 6" NOTE: Sizing, for " > 2 /2" use next larger nominal tube O.D. S-Line clamp (i.e. use 2" MHHM for /2" IPS ferrule) I.P.S. I-Line s " - 4" vailalbe in 04 and 6L Standard Finish 2Ra I-Line Ferrules 4WI-5 FERRULE B 9 /2.5 /2 /6.9 2 / /2 27 / / WI-5 FERRULE B 25 /2.5 /2 5 /6.9 2 / /2 5 / /6.5 4 /

58 I-Line Caps 6I-4I-5 & 6I-5I-5 2 /2 5 /8 2 5 /6 2 /2 7 /8 4 7 / /8 6I-4I-5 6I-5I-5 I-Line Gaskets vailable in various elastomers, P/N 40I_-5 (_= identify elastomer) (i.e. 40IT05=Teflon, 40IH=BUN, 40IV-VITON) I-Line Clamps PIPE SIZE DESCRIPTION PRT NUMBER DIMENSION () I-5 " /2 I-5 /2" I-5 2" /2 I-5 2 /2" I-5 " I-5 4" NOTE: Sizing, for " > " use next larger nominal tube O.D. I-Line clamp (i.e. use 2" I for /2" IPS ferrule) 58

59 Hangers: HEX HNGERS (04 SS) TH MODEL PIPE HNGER O.D. Tubing Hex Hangers in T-04 S.S. with BUN grommets. Fluorocarbon Rubber (VITON) grommets are also available as TH-V. See note below on pplication Temperature. TH T HP Material /6 9 /6 8G x " /2 /6 /6 8G x " 2 /6 /6 8G x " 2 /2 5 /6 5 /6 8G x " 9 /6 9 /6 8G x " 4 2 /6 2 /6 8G x " 6 /6 /6 8G x 2" THP MODEL PIPE HNGER The THP line utilizes a split Polypropylene collar that is held in place by the S.S. frame, thereby preventing it from being pulled out. This hanger is available in sizes " through 4". Typical Unfilled Polypropylene: Melt Temperature 20 F (60 C) Deflection Temperature (@264 psi) 20 F Deflection Temperature (@66 psi) 225 F ll dimensions are in inches. Ordering Information: Hangers When ordering please specify *Model TH TH-V TH-P 26CB 26CB-V 26LC K24FCF K24FCV K24FC Blank: O.D. Tube SCH5: Pipe (where available) Refer to the appropriate tables for available sizes for the K24 Series Hangers. Note on pplication Temperature: BUN: Max. Temperature 250 F VITON: Max. Temperature 400 F 59

60 Hangers: Quick Connect/Disconnect hangers (04SS) with Rubber Inserts 26CB - Hanger O.D. Tubing Hanger with a split EPDM insert attachable via a wing nut. VITON inserts are also available as 26CB-V. Refer to pplication temperature in Ordering Information. I.D. B C Tube /2 Tube /2 /2 5 /6 5 2 Tube 2 2 /2 Tube 2 /2 Tube 4 /6 7 /8 6 /2 4 Tube 4 5 /2 2 /8 8 K24FCF - Hanger For take down Piping For tubing or pipe. Please specify. BUN inserts are standard. Fluorocarbon Rubber (Viton) is also available as K24FCV please specify. For the S.S. bracket alone, specify K24FC. Refer to pplication temperature in Ordering Information. B 7 /8 4 /8 /2 7 /8 4 /8 2 7 /8 4 /8 TUBE O.D. 2 /2 2 /2 4 /2 2 / 4 /2 4 /2 5 7 /8 6 4 /2 6 /4 " Pipe 7 /8 4 /8 /2" Pipe 7 /8 4 /8 2" Pipe 2 /2 4 /2 PIPE 2 /2" Pipe 2 /2 4 /2 " Pipe /2 5 7 /8 4" Pipe /2 5 7 /8 * Please specify either O.D. Tube or Pipe 26LC MODEL MINI-PIPE HNGER For fractional tubing /2" and /4" with a BUN Gasket. T-04 SS. 2/6 wide by /4". Refer to pplication temperature in Ordering Information. 60

61 Miscellaneous Fittings Flange adapters vailable in 04, 6L and higher alloys s /2" - 8" Standard Finish unpolished Other finishes and configurations available upon request B C /2 /2 2 /8 9 /6 /4 7 /8 2 /4 5 /8 4 /4 /8 /6 /2 5 7 /8 / /4 7 /8 2 /2 7 5 /2 2 4 /2 6 2 / /2 2 /6 6 9 /2 2 /2 8 /2 /4 2 5 /8 "CMlock" style fittings vailable in 6 s /2" - 6" Standard Finish 2Ra 2, 2C, 2E QUICK DISCONNECT 2 /2 29 /64 /4 6 / /64 /2 5 / /64 2 /2 6 2 / / / /8 ll adapters have a 2Ra finish. 2C 2E 6

62 "CMLOCK" style fittings 2B CLMP, 2D HOSE, 2F WELD X QUICK DISCONNECT COUPLER B C D /2 /64 /4.070 /4 /4 25 /2 2 / /8 55 /64 9 / /6 /2 4 6 / / /6 2 5 /2 2 7 / /4 2 /2 6 /2 2 / / / / / / / / / / /4 ll couplers have a 2Ra finish of shank, buffed coupler section. 2DC QUICK DISCONNECT CP /2 /4 2DP QUICK DISCONNECT PLUG /2 /2 /4 /4 /4 /8 /6 / /2 /6 / /8 6 /6 2Ra finished I.D., buffed O.D. /4 /2 /4 2 2 /6 2 /2 7 /8 2 /8 4 2 / /8 2Ra finished I.D. and O.D. 62

63 pipe to tube adapters Drawings for reference purposes only, reducers can vary greatly. The table is only a sampling of available reducers. vailable in 04, 6L and higher alloys. IPS schedules 5 and 0 are standard. 2R machine finish is standard. We can provide custom finishes, reductions, lengths, walls, and ferrule ends upon request. S-LINE X IPS B/W S-LINE IPS B /2 /2 2 / /4 /4 /2.05 /8.5 /2 /2 / / /2 2 /2 / / / / TUBE OD BW X IPS B/W TUBE OD IPS B C /2 /2 / /2 /4 /4 /2.05 /4 /8.5 /2 /2 /8.9 /2 2 2 / /2 2 /2 / /2 2 / /

64 john perry fittings vailalbe in 04 and 6L s " - 4" Standard Finish 2Ra Other finishes and configuration available upon request john perry nuts, Gaskets, CPS JPH Union Nut, HEx B /6 29 /2 /2 2 /2 /2 2 /6 2 /2 9 /2 /6 4 /6 9 / /6 2 /2 john perry ferrules JP4 - FERRULE 5 /6 /2 /8 2 /8 2 /2 5 /8 5 /8 4 5 /8 JP6 - CP 29 /2 /2 /2 2 /6 2 /2 /6 9 /2 4 2 /2 JP40 - GSKET* B /6 /8 /2 27 /2 2 /2 2 2 /8 2 /6 2 / /2 2 2 /2 /8 /6 4 4 /8 4 /6 *vailable in Silicone, BUN-N, VITON, EPDM, TEFLON JP4PRF - FERRULE 2 /2 4 /2 / / /2 /2 /6 4 /2 JP5 - FERRULE JP5TRF - FERRULE /8 /2 /2 2 /2 2 /2 /4 /4 4 /4 /6 /2 2 /2 2 2 /2 2 /2 27 /2 29 /2 4 /2 64

65 septic fittings SEPTIC UNION SIZE B C 7 / /2 2 /6 / / /2 2 7 /6 2 / / / NI-4 4WNI - MLE I-LINE FERRULE /4 /2 27 / /2 2 /2 29 /2 /2 4 /2 6NI-4I MLE CP 6NI-5I FEMLE CP 2 /2 2 5 /8 2 5 /6 2 /2 7 /8 4 7 / /8 6NI-5 5WNI - FEMLE I-LINE FERRULE 5 /6 /2 /2 2 5 /2 2 /2 7 /2 /2 4 /2 65

66 sweep elbows s /2" - 6" Tube O.D., Buttweld ends standard Standard 6 material Polished O.D. and I.D. 2Ra Other finishes and configuration available upon request Required Information to Order: * Polish Code * Tangent # length * Tangent #2 length * CLR - Center Line Radius * Bend ngle * Tube O.D. * Tube Material (6) * Connection Type SWEEP ELBOWS Std. DIM 2" CLR * 8" CLR * 24" CLR * 6" CLR * 48"CLR * B C D * CLR - Center Line Radius Spools, Fill ports Please see Bevel Seat Fittings section starting on page 45. /2" - 2" nominal ferrule sizes Finishes available, mill to 0Ra electropolished Standard 04 and 6L material Please, contact factory for available lengths. 7-KW 7-KK 66

67 For liquids with a viscosity and density similar to water. To convert inches vacuum into feet suction, multiply by.. lb. per sq. in. = 2. feet of head ft. of head =.4 lbs. per sq. in. U.S. gal. of water = 8.5 lbs. Stainless Steel Tubing Data U.S. gal. = 2 cu. in. in. of mercury =.49 lbs. per sq. in. in. of mercury =.60 inches of water cu. ft. of water = 7.48 U.S. gals. U.S. quart = 947 c.c. Standard (O.D.) inches /2 2 2 /2 4 Gals. water per ft. of length Volume in cu. in. per ft. of length Friction loss expressed in ft. per fitting and ft. per foot of stainless steel tubing Capacity O.D. " O.D. /2" O.D. 2" O.D. 2 /2" O.D. " O.D. 4" in U.S. I.D..870" I.D..70" I.D..870" I.D. 2.70" I.D " I.D..84" G.P.M. Tubing Elbow Tee Tubing Elbow Tee Tubing Elbow Tee Tubing Elbow Tee Tubing Elbow Tee Tubing Elbow Tee

68 See Literature Document FH-870 See Literature Document DS-60 See Literature Document DS-20 SPECILTY PRODUCTS Dedicated production cells for faster lead times Digital imaging equipment for quality validation BPE FITTINGS Manufactured in accordance to SME BPE standards vailable in /2 through 6 Made of T6L stainless steel. Other alloys available BUTTERFLY ND BLL VLVES Butterfly Valves vailable though 4 T04 & 6 construction Finishes are 2 Ra ID and OD position handle RELTED PRODUCTS Unique tangents and configurations Extensive metal working capabilities Electropolished fittings available MTR (Material Test Reports) provided with each shipment Packaged in resealable bags Ball Valves vailable /2 through 4 T6 construction Finishes are 2 Ra ID Meets and FD requirements Comes with standard locking handle See Literature Document FH-870 See Literature Document FH-75 Offering Rath manufactured tubing in T04 and T6L stainless steel Special alloy products in L6XN and Hastelloy T6 S-Line Clamps C-SERIES PUMPS Value priced pump offering strong performance Easy-cleaning, open type impeller delivers smooth pumping performance Common pplications: Food, Dairy, Beverage, Pharmaceutical, and Personal Care Hangers Sampling Valves Check Valves Special Gaskets Enlarged inlets available for larger suction lines Standard CIP capability Parts are interchangeable with other C-Series brands Your local contact: SPX Process Equipment 6 Sugar Creek Road Delavan, WI 55 Phone: (262) or (800) Fax: (262) or (800) wcb@spx.com For more information about our worldwide locations, approvals, certifications, and local representatives, please visit SPX Corporation reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Issued: 0/2008 FH-80 Copyright 2002, 2008 SPX Corporation