Stainless Steel Valves

Size: px
Start display at page:

Download "Stainless Steel Valves"

Transcription

1 Stainless Steel Valves For the Sanitar y Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves Compression and relief valves

2 Stainless Steel Valves for the Sanitary Industries Contents Sanitary Ball Valves Butterfly Valves Sanitary Ball Valves On-off (2-way) valves 316 SS construction Vertical Disk Check Valves Cavity-filled virgin PTFE seat Ball Check Valves ir Blow Check Valves ir Relief Valves C ompression and Relief Valves True inside-diameter bore Blowout-proof stem 1/2 to 4 in. Kwik-Clamp and butt weld end connections; TS series sanitary end connections also available ISO 5211 and DIN 3337 mounting Locking handle Materials of Construction Component 1 Body 2 Ball 3 Flange 4 Seat 5 Flange seal 6 Thrust washer 7 Stem packing 8 Packing bolt 9 Stem washer 10 Stem nut Wetted components listed in italics. Material Grade/ Specification CF8M/STM 351 PTFE 304 SS/ISI 11 Stem 316 SS/STM Bolt washer 13 Nut 14 Bolt 304 SS/ISI 15 Handle 304 SS/ISI 16 Handle sleeve PVC 17 Locking latch 316 SS

3 Stainless Steel Valves for the Sanitary Industries 3 Pressure-Temperature Ratings 1000 psig (68.9 bar) maximum working pressure at 72 F (22 C). Pressure ratings depend on temperature and materials of construction. Pressure ratings may be limited by the end connection. Ordering Information and Dimensions Select a sanitary ball valve ordering number. Dimensions are for reference only and are subject to change. C B s➀ Ordering Dimensions, in. (mm) Type Number Wall ID B C 1/2 in. 3/4 in. 1 in. 1 1/2 in. 2 in. 2 1/2 in. 3 in. 4 in. Tube butt weld JBV Kwik-Clamp JCBV650 (9.4) Tube butt weld JBV Kwik-Clamp JCBV675 (16.0) Tube butt weld JBV Kwik-Clamp JCBV610 (22.1) Tube butt weld JBV Kwik-Clamp JCBV615 (35.1) Tube butt weld JBV Kwik-Clamp JCBV620 (47.5) Tube butt weld JBV Kwik-Clamp JCBV625 (60.2) Tube butt weld JBV Kwik-Clamp JCBV630 (72.9) Tube butt weld JBV Kwik-Clamp JCBV640 (97.5) ISO 5211 Flange ➀ Swagelok TS series sanitary clamp end connections are also available. Contact your authorized Swagelok sales and service representative (88.9) 3.98 (101) 4.49 (114) 5.51 (140) 6.14 (156) 7.76 (197) 9.02 (229) 9.49 (241) 2.05 (52.1) 2.24 (56.9) 2.36 (59.9) 3.54 (88.9) 4.02 (102) 5.51 (140) 6.10 (155) 7.09 (180) 5.16 (131) 5.16 (131) 5.16 (131) 7.36 (187) 7.36 (187) 10.2 (259) 10.2 (259) 11.4 (290) F03 F03 F04 F05 F05 F07 F07 F10 Weight lb (kg) 1.55 (0.70) 1.95 (0.88) 2.80 (1.27) 7.00 (3.18) 9.50 (4.31) 19.5 (8.85) 29.5 (13.4) 43.0 (19.5) ctuation Torque in. lb (N m) 60 (6.8) 80 (9.1) 120 (13.6) 420 (47.5) 560 (63.3) 1100 (125) 1600 (181) 3200 (362)

4 4 Stainless Steel Valves for the Sanitary Industries Butterfly Valves 304 SS and 316L SS construction Silicone seat material standard; EPDM and fluorocarbon FKM also available 1 to 4 in. Kwik-Clamp and tube butt weld connections standard; cme threaded end connections also available Manual Butterfly Valves Multiposition Handle Pressure-Temperature Ratings Maximum working pressure 145 psig (10.0 bar) for 1 to 3 in. sizes and 115 psig (7.9 bar) for 4 in. size Maximum temperature 250 F (121 C), based on seal material manufacturer s rating Pneumatically ctuated Butterfly Valves Normally closed and double-acting models actuate at 87 to 116 psig (6.0 to 8.0 bar) air pressure 1/8 in. BSPP air inlet connection Optional proximity switch available: 24 V (dc), 6 ft (1.8 m) cable one- or two-switch assemblies Contact your authorized Swagelok representative for additional feedback signal options. Two-Position Handle Dimensions Dimensions, in inches (millimeters) are for reference only and are subject to change (150) 5.91 (150) 3.78 (96.0) C D E B Kwik- Clamp Tube Butt Weld Dimension, in. (mm) Wall B C D E 1 in (64.0) 1.58 (40.1) 3.42 (86.9) 3.55 (90.2) 9.17 (233) 1 1/2 in (97.3) 3.73 (94.7) 3.75 (95.2) 9.38 (238) 2.83 (71.9) 2 in (110) 3.97 (101) 4.06 (103) 9.64 (245) 1.97 (50.0) 2 1/2 in (127) 4.33 (110) 4.34 (110) 9.72 (247) 3.00 (76.2) 3 in (142) 4.61 (117) 4.64 (118) 10.0 (254) 4 in (104) 2.52 (64.0) (162) 5.05 (128) 5.03 (128) 10.7 (272) B

5 Stainless Steel Valves for the Sanitary Industries 5 Ordering Information Build a butterfly valve ordering number by combining the designators in the sequence shown below. JC10B E P1 Basic Ordering Number JC10B = Kwik-Clamp end connections J10B = Tube butt weld end connections Surface Finish 32 µin. (0.81 µm) max polished ID and OD Material Grade 4 = 304 SS 6 = 316L SS 10 = 1 in. 15 = 1 1/2 in. 20 = 2 in. 25 = 2 1/2 in. 30 = 3 in. 40 = 4 in. Optional Proximity Switch P1 = One switch assembly P2 = Two switch assemblies Omit for no proximity switch. Optional Seat Material E = EPDM V = Fluorocarbon FKM Omit for silicone. ctuation Manual MP = Multiposition 2P = Two-position Pneumatic 20 = Normally closed 30 = Double acting Replacement Parts Valve Seats dd an end connection size designator to a basic ordering number. Seat Material Silicone EPDM Fluorocarbon FKM Basic Ordering Number JC10BSX JC10BE JC10BV Example: JC10BSX10 Designator 1 in /2 in in /2 in in in. 40 Manual Valve Handles 1 through 3 in. 4 in. Handle Type Multiposition Two-position Multiposition Two-position Ordering Number JC10BHMP JC10BH2P JC10BHMP4 JC10BH2P4

6 6 Stainless Steel Valves for the Sanitary Industries Vertical Disk Check Valves Prevent product backflow in vertical applications 304 SS or 316L SS construction Metal seat standard; O-ring seats also available Buna N body seal material standard; EPDM and fluorocarbon FKM also available 1/2 to 4 in. Kwik-Clamp and tube butt weld and 1 to 4 in. cme threaded end connections available Disk check valves must be mounted vertically. Pressure-Temperature Ratings Cracking pressure 3 psig (0.2 bar) maximum Maximum operating pressure 150 psig (10.3 bar) Maximum operating temperature, based on seal material manufacturer s ratings: 250 F (121 C) for standard Buna N body seal and for optional EPDM body seal 350 F (176 C) for optional fluorocarbon FKM body seal Materials of Construction Valve Body Material 316L SS 304 SS Component Material Housing 316L SS 304 SS Clamp 304 SS Gasket Buna N Spring support, spring, plunger 316 SS Wetted components listed in italics. Dimensions Dimensions are for reference only and are subject to change. 1/2 in. 3/4 in. Kwik- Clamp, in. (mm) Tube Butt Weld cme Threaded 4.33 (109) 1 in (130) 5.12 (130) 6.50 (165) 1 1/2 in (130) 5.12 (130) 6.56 (167) 2 in (129) 5.06 (129) 6.50 (165) 2 1/2 in (159) 6.27 (159) 7.95 (202) 3 in (155) 6.12 (155) 7.94 (202) 4 in (171) 6.75 (171) 9.38 (239) Ordering Information Build a vertical disk check valve ordering number by combining the designators in the sequence shown below. 45HC 6 20 Basic Ordering Number 45HC = Kwik-Clamp end connections 45HB = Tube butt weld end connections 45H = cme threaded end connections Material Grade 4 = 304 SS 6 = 316L SS 50 = 1/2 in. (Kwik-Clamp only) 75 = 3/4 in. (Kwik-Clamp only) 10 = 1 in. 15 = 1 1/2 in. 20 = 2 in. 25 = 2 1/2 in. 30 = 3 in. 40 = 4 in. To order optional body seal and O-ring materials, contact your authorized Swagelok representative.

7 Stainless Steel Valves for the Sanitary Industries 7 Ball Check Valves Ordering Information and Dimensions Select a ball check valve ordering number. Dimensions are for reference only and are subject to change Limit product backflow 316L SS construction Buna N ball; nylon, EPDM, and fluorocarbon FKM also available 1 1/2 to 3 in. Kwik-Clamp end connections Ordering Number in. (mm) 1 1/2 in. JC45BY (305) 2 in. JC45BY (259) 2 1/2 in. JC45BY (356) 3 in. JC45BY (279) To order optional ball materials, contact your authorized Swagelok representative. 1/2 and 3/4 in. Ball Check Valves Valve bodies 316 stainless steel connections 316L stainless steel Body clamps 304 stainless steel Gaskets Buna N Ball polypropylene 3- compliant Ordering Information and Dimensions Dimensions are for reference only and are subject to change. in. (mm) 1/2 in (108) 3/4 in (102) To order, add 50 for 1/2 in. size or 75 for 3/4 in. size to basic ordering number JC45V. Example: JC45V50

8 Stainless Steel Valves for the Sanitary Industries 8 ir Blow Check Valves Flow Data Limit product backflow with simple air-to-open, spring-to-close operation ir Flow, std L/h 316L SS construction Bonded synthetic rubber plug assembly EPDM gasket Spun bonded polypropylene filter disc traps particles down to 1 µin. in size System Pressure, psig System Pressure, bar 1 1/2 to 4 in. Kwik-Clamp inlet end connections permit quick disassembly and reassembly for cleaning, replacing filter media, or inspection ir Flow, std ft 3 /h Polyline, rubber hose, and female NPT adapter air inlet 3- compliant Dimensions Dimensions, in inches (millimeters) are for reference only and are subject to change. in. (mm) 1 1/2 in (50.3) 2 in (64.0) 2 1/2 in (77.5) 3 in (90.9) 4 in (119) 3.06 (77.7) 3.88 (98.6) 1.88 (47.8) JC62 JC62B JC62C Ordering Information Build an air blow check valve ordering number by combining the designators in the sequence shown below. JC Basic Ordering Number JC62 = Polyline air inlet connection JC62B = Rubber hose adapter air inlet connection JC62C = Female NPT adapter air inlet connection 15 = 1 1/2 in. 20 = 2 in. 25 = 2 1/2 in. 30 = 3 in. 40 = 4 in. Material Grade 316L SS

9 9 Stainless Steel Valves for the Sanitary Industries ir Relief Valves Dimensions Dimensions, in inches (millimeters), are for reference only and are subject to change (171) 5.00 (127) Remove air from line or tank with minimal product loss 316L SS construction Polypropylene ball Standard Buna body gasket; other gasket materials available 1 1/2 to 4 in. Kwik-Clamp end connections ir relief valves must be mounted vertically. Ordering Information Build an air relief valve ordering number by combining the designators in the sequence shown below. JC60RV 6 20 Basic Ordering Number ir relief valve with Kwik-Clamp end connections Material Grade 316L SS 15 = 1 1/2 in. 20 = 2 in. 25 = 2 1/2 in. 30 = 3 in. 40 = 4 in. Contact your authorized Swagelok representative for optional gasket materials.

10 Compression and Relief Valves Dimensions Dimensions are for reference only and are subject to change. 316L SS construction 3/4 to 3 in. Kwik-Clamp and 1 to 3 in. cme threaded end connections Kwik- Clamp, in. (mm) cme Threaded 3/4 in (60.5) 1 in (60.5) 1.81 (46.0) 1 1/2 in (69.8) 2.38 (60.5) 2 in (88.9) 2.78 (70.6) 2 1/2 in (88.9) 3.19 (81.0) 3 in (95.2) 3.50 (88.9) Ordering Information Build a compression or relief valve ordering number by combining the designators in the sequence shown below. D60TMP 6 20 Basic Ordering Number Compression Valves D60TMP = Kwik-Clamp end connections D60TM = cme threaded end connections Relief Valves D60RTHMP = Kwik-Clamp end connections D60RTH = cme threaded end connections Material Grade 316L SS 75 = 3/4 in. (Kwik-Clamp only) 10 = 1 in. 15 = 1 1/2 in. 20 = 2 in. 25 = 2 1/2 in. 30 = 3 in. Contact your authorized Swagelok representative for optional O-ring and relief spring materials. Safe Product Selection When selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Caution: Do not mix or interchange parts with those of other manufacturers. Warranty Information Swagelok products are backed by The Swagelok Limited Lifetime Warranty. For a copy, visit swagelok.com or contact your authorized Swagelok representative. Swagelok TM Swagelok Company 2003, 2004, 2007, 2008 Swagelok Company Printed in U.S.., GLI pril 2008, R4 MS-03-06

Single-Seat Valves For the Sanitary Industries

Single-Seat Valves For the Sanitary Industries www.swagelok.com Single-Seat s For the Sanitary Industries Stainless steel construction Shutoff, divert, modulating, and specialty valves 1/2 to 4 sizes Kwik-lamp and tube butt weld end connections 3-

More information

ISO 5211-Compliant Actuators for Swagelok Ball Valves

ISO 5211-Compliant Actuators for Swagelok Ball Valves www.swagelok.com ISO 5211-Compliant s for Swagelok Ball s 40G, 40, 60, and 83 ; and AFS Ball s Pneumatic rack and pinion actuators s meet industry standards for interface: ISO 5211, NAMUR, and VDI/VDE

More information

Swagelok Alternative Fuel Ser vice (AFS) Ball Valves

Swagelok Alternative Fuel Ser vice (AFS) Ball Valves www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C

More information

Be llows-se aled Valve s

Be llows-se aled Valve s www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,

More information

Special Alloy Ball Valves

Special Alloy Ball Valves www.swagelok.com Special Alloy Ball Valves 60 Series 3/8 to 1 in. sizes Alloy 625, alloy 825, alloy 2507 super duplex stainless steel, and 6-moly materials On-off (2-way) valves Compensating seat design

More information

Medium-Pressure Ball Valves

Medium-Pressure Ball Valves www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem and end connection seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range

More information

Stream Selector System For Process Analyzer Applications

Stream Selector System For Process Analyzer Applications www.swagelok.com Selector System For Process Analyzer Applications SSV Series Provides double-block-and-bleed (DBB) operation in a single compact module Conventional NPT and ANSI/ISA 76.00.02 compatible

More information

Medium-Pressure Ball Valves

Medium-Pressure Ball Valves www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem and end connection seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range

More information

Medium-Pressure Ball Valves

Medium-Pressure Ball Valves www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range Bottom-loaded stem

More information

Bellows-Sealed Valves

Bellows-Sealed Valves www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and

More information

Toggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns

Toggle Valve s. OG, 1G, and 92 Series.   Manual and pneumatically actuated models. Straight, angle, and cross body patterns www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens

More information

PFA Needle Valves. 4RP Series

PFA Needle Valves. 4RP Series PFA Needle Valves 4RP Series High-purity PFA material Pressures up to 180 psig (12.4 bar) Temperatures up to 300 F (148 C) 1/4, 3/8, and 1/2 in. Swagelok PFA tube fitting end connections www.swagelok.com

More information

Be llows-se aled Valve s

Be llows-se aled Valve s www.swagelok.com Be llows-se aled s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel,

More information

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures

Check Valves. C, CA, CH, CP, and CPA Series.  Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass

More information

D iaphragm Valve s. for Atomic L aye r D e position. Atomic Layer Deposition (ALD) Diaphragm Valves.

D iaphragm Valve s. for Atomic L aye r D e position. Atomic Layer Deposition (ALD) Diaphragm Valves. www.swagelok.com D iaphragm Valve s for tomic L aye r D e position tomic Layer Deposition (LD) Diaphragm Valves Ultrahigh cycle life with high-speed actuation C v range from 0.27 to 0.62 Up to 392 F (200

More information

Diaphragm Valves. LD Series. Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service

Diaphragm Valves. LD Series.   Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service www.swagelok.com Diaphragm Valves LD Series Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service Cast, forged, and bar stock stainless steel body material 1/4

More information

Weir-Style Diaphragm Valves

Weir-Style Diaphragm Valves www.swagelok.com Weir-Style Diaphragm s DW Series Standard valve sizes 1/2 to 4 in. and minivalve sizes 1/4, 3/8, and Manual and pneumatic actuation Kwik-Clamp, TS series sanitary clamp, and tube butt

More information

Instrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds

Instrument Manifolds. V, VB, and VL Series.  2-, 3-, and 5-valve instrument manifolds www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to

More information

Be llows-se aled Valve s

Be llows-se aled Valve s www.swagelok.com Be llows-se aled Valve s BN Series Packless valves with all-metal seal to atmosphere Working pressures up to 500 psig (34.4 bar) Temperatures up to 200 F (93 C) 1/4 to 1/2 in. and 6 to

More information

Weir-Style Diaphragm Valves

Weir-Style Diaphragm Valves www.swagelok.com Weir-Style Diaphragm s GSI Series Available in sizes 1/2 to 4 Available with a variety of end connections, including Kwik-Clamp and TS series sanitary clamp and tube butt weld 2 Weir-Style

More information

Radial Diaphragm Valve

Radial Diaphragm Valve www.swagelok.com Radial Diaphragm DR Series 36L stainless steel and modified PTFE wetted parts Variety of compact multivalve, multiport configurations Choice of sanitary clamp and butt weld end connections

More information

Tr unnion Ball Valve s

Tr unnion Ball Valve s www.swagelok.com Tr unnion Ball Valve s 83 Series and H83 Series Working pressures up to 10 000 psig (689 bar) 1/8 to 1/2 in. and 6 to 12 mm Swagelok tube fitting or NPT end connections 316 stainless steel

More information

Stream Selector System

Stream Selector System www.swagelok.com Selector System For Process Analyzer Applications SSV Series Provides double-block-and-bleed (DBB) operation in a single compact module Conventional NPT and ANSI/ISA 76.00.02 compatible

More information

Springless Diaphragm Valves

Springless Diaphragm Valves www.swagelok.com Springless Diaphragm Valves for igh Performance DP Series Suitable for ultrahigh-purity applications 316L VIM-VAR stainless steel body Low-pressure and high-pressure models VCR, tube butt

More information

Swagelok Alternative Fuel Service (AFS) Ball Valves

Swagelok Alternative Fuel Service (AFS) Ball Valves Swagelok Alternative Fuel Service () Ball Valves 461 Swagelok Alternative Fuel Service () Ball Valves For High-Pressure, High-Flow Applications Swagelok Ball Valves Working pressures up to 6000 psig (413

More information

Pressure Regulators RHPS Series

Pressure Regulators RHPS Series Pressure Regulators Series 1 www.swagelok.com Pressure Regulators Series Pressure-reducing models Back-pressure models Spring-, dome-, and air-loaded 1/4 to 4 in. end connections Working pressures up to

More information

High-Pressure Needle Valves

High-Pressure Needle Valves www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design

More information

Modular Instrumentation System

Modular Instrumentation System www.swagelok.com Modular nstrumentation System Kenmac Series Modular 85 System Provides a standard modular instrumentation interface and mounting system: 2- and 4- valve pressure and differential pressure

More information

Instrument Ball Valves

Instrument Ball Valves www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option

More information

Actuated Ball Valve Se le ction Guide

Actuated Ball Valve Se le ction Guide www.swagelok.com Actuated Ball Se le ction Guide ISO 5211-Compliant Actuator Mounting Bracket K its 40G, 40, 60, and 83 s Calculate valve operating torque Choose actuators and related components Select

More information

Sample Probe Module. Application Guide

Sample Probe Module. Application Guide Sample Probe Module Application Guide A Swagelok Pre-Engineered Subsystem Pre-engineered subsystems available in weeks, not months. Field-tested design ensures optimum system performance. Wide range of

More information

Quick-Connects. QC, QF, QM, and QTM Series. No twisting, turning, or wrenching necessary

Quick-Connects. QC, QF, QM, and QTM Series.   No twisting, turning, or wrenching necessary www.swagelok.com Quick-Connects QC, Q, QM, and QTM No twisting, turning, or wrenching necessary Single-end shutoff, double-end shutoff, and full-flow models 2 Quick-Connects Contents Instrumentation Quick-Connects

More information

Evans SN Series. Evans. Sanitary & Vacuum Ball Valves

Evans SN Series. Evans. Sanitary & Vacuum Ball Valves SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN

More information

Process Ball Valve Handle O ptions

Process Ball Valve Handle O ptions www.swagelok.com Process Ball Handle O ptions Ha ndle K its a nd Factor y-installe d Ha ndle s Lever and oval handles Locking brackets for lever and oval handles Oval latch-lock handles Process Ball Handle

More information

Fluid Distribution Header

Fluid Distribution Header Fluid Distribution Header Application Guide A Pre-Engineered Subsystem Pre-engineered subsystems available in weeks, not months. Field-tested design ensures optimum system performance. Versatile manifold

More information

DL/DS Series Diaphragm Valve

DL/DS Series Diaphragm Valve DL/DS Series Diaphragm Valve Service Instructions DL Series (Lever Handle) Valve DS Series (Round Handle) Valve Valves are shown with tube butt weld ends. These instructions also apply to DL or DS series

More information

Bleed Valves and Purge Valves

Bleed Valves and Purge Valves www.swagelok.com Bleed Valves and Purge Valves Bleed Valves Pressures up to psig (689 bar) Temperatures up to 8 F ( C) 36 stainless steel, carbon steel, or alloy R- materials Purge Valves Pressures up

More information

Sanitary Solutions Valves/Product Recovery System Catalog Distributed By:

Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Air Blow Check Valves SSABCV-Size-Alloy SSABCV-FNPT-Size-Alloy SSABCV-RHB-Size-Alloy Air Blow, Y-Ball, Check Valve Sanitary Solutions

More information

Plug Valves. P4T and P6T Series. Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections

Plug Valves. P4T and P6T Series. Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections Plug Valves P4T and P6T Series 1 www.swagelok.com Plug Valves P4T and P6T Series Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections 1/8 through

More information

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass materials Check Valves

More information

Ball Valves. General Purpose and Special Application. 60 Series. 1/8 to 2 in. and 6 to 25 mm sizes

Ball Valves. General Purpose and Special Application. 60 Series. 1/8 to 2 in. and 6 to 25 mm sizes Ball s, General Purpose and Special Application60 1 www.swagelok.com Ball s General Purpose and Special Application 60 1/8 to 2 in. and 6 to 25 mm sizes Stainless steel, carbon steel, brass, and special

More information

Swagelok Ball Valve Actuation Options

Swagelok Ball Valve Actuation Options www.swagelok.com Swagelok Ball Valve Actuation Options Rack and pinion pneumatic actuators, solenoid valves, and limit switches ISO 5211-compliant pneumatic actuators, solenoid valves, limit switches,

More information

S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service

S, M, L, and 31 Series.  Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel

More information

Springless Diaphragm Valves (1.125 in.)

Springless Diaphragm Valves (1.125 in.) Springless Diaphragm Valves ( in.) DE Series 1 www.swagelok.com Springless Diaphragm Valves ( in.) For Modular Gas Systems DE Series in. C-seal and W-seal designs Available in two- and three-port configurations

More information

Bellows-sealed Valves

Bellows-sealed Valves ellows-sealed Valves ellows-sealed Valves V-64 SVH Series High Pressure ellows-sealed Valves Features Packless valves with all-metal seal to atmosphere ompact designed body with minimal dead space 16 SS

More information

Ultrahigh-Purity Fluoropolymer Diaphragm Valves

Ultrahigh-Purity Fluoropolymer Diaphragm Valves www.swagelok.com Ultrahigh-Purity Fluoropolymer Diaphragm s DRP Series DuPont Teflon modified PTFE wetted parts and polypropylene actuator Meet SEMI Standard F57-0301 for ultrahigh-purity system components

More information

Pressure Regulators K Series

Pressure Regulators K Series www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator

More information

Gaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings

Gaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings www.swagelok.com Gaugeable Alloy 400 Mechanically Attached and Fittings For use with MIL-T-16420K 70/30 and 90/10 copper-nickel tubing and pipe Excellent corrosion resistance in chloride-containing environments

More information

DR Series Radial Diaphragm Valves

DR Series Radial Diaphragm Valves DR Series Radial Valves Service Instructions Valves with Plastic Actuators (1/2 through 1 inch) Valves with Aluminum Actuators (1/2 through 2 inch) Manual model Pneumatic model Manual model Pneumatic model

More information

Ball Valves in investment cast stainless 2-way

Ball Valves in investment cast stainless 2-way Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out

More information

Manual and Actuated Butterfly Valves

Manual and Actuated Butterfly Valves Manual and ctuated Butterfly Valves Butterfly Valves offer great durability and ease of use for a wide range of services. Easy to install and maintain, butterfly valves close under pressure to form a leak-tight

More information

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures

Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Check Valves C, CA, CH, CP, and CPA Series 1 www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end

More information

Instrument Manifold Systems

Instrument Manifold Systems www.swagelok.com Instrument Manifold Systems Instrument, Direct, and Remote-Mount Manifolds and Modular Systems V, VB, and VL series 2-, 3-, and 5- instrument manifolds VE series 2-, 3-, and 5- direct-mount

More information

Manual Valves. Indianapolis Chicago San Juan

Manual Valves. Indianapolis Chicago San Juan Manual Valves Indianapolis Chicago San Juan www.hollandapt.com 800-800-8464 Check Valves 45 Spring Check Valves Waukesha Cherry-Burrell W45 Check Valves are wafer-style, where product flow pushes the valve

More information

TY-FLO 3 Piece Ball Valves

TY-FLO 3 Piece Ball Valves TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance

More information

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality

More information

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f. W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves

More information

DA Series Diaphragm Valve

DA Series Diaphragm Valve DA Series Diaphragm Valve Service Instructions Pneumatically Actuated Valve Toggle Valve Valve Valve Valves are shown with tube butt weld ends. These instructions also apply to DA series valves with any

More information

F low L ine 72/73 Wafer & Lug Style Sizes 2-24

F low L ine 72/73 Wafer & Lug Style Sizes 2-24 F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a

More information

Toggle Valves. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns

Toggle Valves. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns Toggle Valves OG,, and 92 1 www.swagelok.com Toggle Valves OG,, and 92 Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials 2 Needle and Metering

More information

25mm-500mm (1"- 20") SERIES 20/21 Wafer/Lug BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED. The High Performance Company

25mm-500mm (1- 20) SERIES 20/21 Wafer/Lug BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED. The High Performance Company BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 25mm-500mm (1"- 20") The High Performance Company SERIES 20 25mm 500mm (1" 20") Bray Controls is proud to offer a high quality

More information

Swing - Out Ball Valves. High Technology Valve & Fitting Series

Swing - Out Ball Valves. High Technology Valve & Fitting Series Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested

More information

Bleed Valves and Purge Valves

Bleed Valves and Purge Valves Bleed Valves and Purge Valves 1 www.swagelok.com Bleed Valves and Purge Valves Bleed Valves Working pressures up to 10 000 psig (689 bar) Temperatures up to 850 F (454 C) 316 stainless steel, carbon steel,

More information

STEEL & O BRIEN MANUFACTURING

STEEL & O BRIEN MANUFACTURING STEEL & O BRIEN MANUFACTURING VALVES, SIGHT GLASSES & SPRAY BALLS Don t See What You Need? We have more than 35,000 unique part numbers in our inventory. We ll be happy to help you find what you need or

More information

TY-FLO 3 Piece Ball Valves

TY-FLO 3 Piece Ball Valves OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular

More information

Dixon Sanitary General Products. dixonvalve.com Customer Service:

Dixon Sanitary General Products. dixonvalve.com Customer Service: UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU General Products dixonvalve.com Customer Service: 877.963.4966 : maintaining the standard of quality The

More information

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f. W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index

More information

Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves

Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2014. From the materials

More information

THREE-PIECE BALL VALVES H-500 SERIES

THREE-PIECE BALL VALVES H-500 SERIES THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel

More information

Swagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings

Swagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings www.swagelok.com Swagelok Medium-Pressure, Gaugeable Fit tings and dapte r Fit tings For Pre s sure s up to 15 0 0 0 psig (1034 ba r) asy installation, no special tools required ssembly by one full turn

More information

Transportation Products

Transportation Products Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient

More information

SSV Series. Assembly and Service Instructions. Contents. Tool Requirements

SSV Series. Assembly and Service Instructions. Contents. Tool Requirements SSV Series Assembly and Service Instructions Contents Tool Requirements................. 1 Components and Hardware.......... 2 Port and Mounting Dimensions....... 3 General SSV Assembly.............. 4

More information

Bellows-Sealed Valves

Bellows-Sealed Valves Bellows-Sealed sb 1 www.swagelok.com Bellows-Sealed s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass,

More information

Heavy compression closure option for high velocities. Choice of gasket materials: EPDM or

Heavy compression closure option for high velocities. Choice of gasket materials: EPDM or Manual Valves Check Valves 45 SPRING CHECK VLVES Waukesha Cherry-Burrell brand W45 Check Valves are wafer-style, where product flow pushes the valve disc away from the seat. In the absence of forward flow

More information

Instrument Ball Valves

Instrument Ball Valves Instrument Ball s 40 Series On-Off, Switching, and rossover 1/16 to 3/4 in. and 3 to 12 mm end connections Pressures to 3000 psig (206 bar) Virtually no dead space www.swagelok.com 40 Series s Features

More information

Stream Selector System

Stream Selector System Selector System Series 1 www.swagelok.com Selector System For Process Analyzer Applications Series Provides double-block-and-bleed (DBB) operation in a single compact module Conventional NPT and ANSI/ISA

More information

STC Manual & Actuated Process Valves

STC Manual & Actuated Process Valves STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2

More information

Dixon Sanitary 2008 Actuation Catalog

Dixon Sanitary 2008 Actuation Catalog Dixon Sanitary 008 Actuation Catalog Distributed By: Table of Contents Miscellaneous... -5 Ordering Instructions... - Seat and Seat Materials... Available Options...5 Standards and Finishes...5 Check Valves...

More information

Lug Style Butterfly Valve Type 578

Lug Style Butterfly Valve Type 578 Lug Style Butterfly Valve Type 58 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 Stainless steel Lugs:

More information

Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,

Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel, Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom

More information

DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS

DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve

More information

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves

More information

THREE-PIECE BALL VALVES H-500 SERIES

THREE-PIECE BALL VALVES H-500 SERIES THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel

More information

Section G Series 77 High Purity Ball Valve Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com

More information

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

2- 20 (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly

More information

SCREWED BONNET NEEDLE VALVES

SCREWED BONNET NEEDLE VALVES SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5

More information

Family of Products 1100 SERIES 1500 SERIES. 3 Piece Full Port Fire Safe Ball Valve ANSI Class WOG

Family of Products 1100 SERIES 1500 SERIES.   3 Piece Full Port Fire Safe Ball Valve ANSI Class WOG Family of Products 3210 S. Susan St, Santa Ana, CA 92704 Tel (714) 427-0877 Fax (714) 427-6392 www.avcovalve.com 1100 SERIES 3 Piece Full Port Fire Safe, PCTFE, PEEK, 1500 SERIES 3 Piece Full Port Fire

More information

BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001

BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001 Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial

More information

Ball Valves & Accessories

Ball Valves & Accessories Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with

More information

DY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动

DY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动 DY Series 1-Piece Ball Valves Catalog 1001C-A July 2012 欧陆传动 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents

More information

Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve

Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting

More information

Rising Plug Valves. 4P and 5P Series. Roddable, straight-through orifice for maximum flow. Working pressures up to 6000 psig (413 bar)

Rising Plug Valves. 4P and 5P Series. Roddable, straight-through orifice for maximum flow. Working pressures up to 6000 psig (413 bar) Rising Plug Valves4P and 5P Series 1 www.swagelok.com Rising Plug Valves 4P and 5P Series Roddable, straight-through orifice for maximum flow Working pressures up to 6000 psig (413 bar) Packing below the

More information

WARNING CAUTION. CAUTION Do not exceed 120 psig (8.3 bar) air-inlet pressure.

WARNING CAUTION. CAUTION Do not exceed 120 psig (8.3 bar) air-inlet pressure. 13966-100-BP SAFETY MANUAL READ FIRST! IMPORTANT: READ THESE WARNINGS AND SAFETY PRECAUTIONS PRIOR TO INSTALLATION OR OPER- ATION. FAILURE TO COMPLY WITH THESE INSTRUC- TIONS COULD RESULT IN PERSONAL INJURY

More information

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends 2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring

More information

Air Operated Stainless Steel 6000psi Ball Valve

Air Operated Stainless Steel 6000psi Ball Valve Type: PA2811 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,

More information

TY-FLO 3 Piece Ball Valves

TY-FLO 3 Piece Ball Valves TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance

More information

Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves

Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials

More information

Type 543. Three-way Ball Valve

Type 543. Three-way Ball Valve Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,

More information

Swing - Out Ball Valves. High Technology Valve & Fitting Series

Swing - Out Ball Valves. High Technology Valve & Fitting Series Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is

More information

A Type Double Acting Actuator Type: PA2911

A Type Double Acting Actuator Type: PA2911 Type: PA2911 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,

More information