Wedge Probe Cards PCBs, Connectors, Applications HTT Wedge Probe Cards
|
|
- Maximilian Everett Lewis
- 6 years ago
- Views:
Transcription
1 Wedge Probe Cards PCBs, Connectors, Applications Page 1
2 Wedge Probe Cards made by HTT Probe Card Division Wedge Probe Cards are defined as Probe Cards containing a Pin Count of less than 50 needles which can be mounted onto industry standard positioner arms. Currently, HTT provides the option to have the Wedge Probe Card mounted onto a HTT supplied 4.5 Probe Card Frame. Historically, Wedge Probe Cards were developed from the necessity to have more than a single probe mounted on a probe positioner arm. Additional advantages of Wedge Probe Cards: Wedge Probe Cards manufactured with HTT stocked standard PCBs enable short delivery times Connector types can be customized to match customer s existing cables High frequency (RF), low frequency (LF), and DC combinations can be accommodated on a single Wedge Probe Card Tungsten and BeCu material option for DC needles; metal, ceramic and microstrip blades combination of several Wedge Probe Cards on one Test Setup possible (same types or different types) Possibility of single probing solution via integration of identical and/or different Wedge Probe Cards Customization for applications and Wedge Probe Card PCB layouts can be completed quickly and are minimally priced See on the following pages HTT s Standard Wedge PCB s we have constantly in stock. The big image on the following pages placed on the left-hand side will show an application which is one possible configuration in Needle Count, Connector, holders as well as additional components mounted on the PCB. For any question feel free to call us directly! Hartmut Wauer Head of Development Probe Cards Division htt GROUP Probe Card Division Dresden Tel. +49 (0) HWauer@httgroup.eu Falk Schoene Production Manager Probe Cards Division htt GROUP Probe Card Division Zur Wetterwarte 50, Haus 337 b Tel. +49 (0) FSchoene@httgmbh.de Eberhard Siml CEO htt GROUP Landsberger Str Munich / Germany Tel. +49 (0) esiml@httgroup.eu Page 2
3 PCB WEDGE3 Size (mm) 50 x 37 x 1,5 Drill diameter and distance (mm) 3-20 Aperture angle 120 Example of a DC application: 5 metal blade needles (BeCu), boxed IDC header, bracket and SMD components Maximum Pin Count Connector 34 Maximum Needle Count Blade 17 SMX Connector ready Remarks Page 3
4 PCB WEDGE4 Size (mm) 55 x 48 x 1,5 Drill diameter and distance (mm) 3-20 Aperture angle 90 Example of a DC application: 12 needles (tungsten): epoxy technology, bracket, wire wrap connector, SMD components, 4.5 wedge frame and box Maximum Pin Count Connector 40 Maximum Needle Count Blade 20/40 Remarks Page 4
5 PCB WEDGE7 Size (mm) 50 x 50 x 1,5 Drill diameter and distance (mm) 3-20 Aperture angle 85 Example of a DC application: 22 needles (tungsten), epoxy technology, wire wrap connector Quadrant practicable - Maximum Pin Count Connector 40 Maximum Needle Count Blade - Remarks Page 5
6 PCB WEDGE6 Size (mm) 50 x 39 x 1,5 Drill diameter and distance (mm) 3-20 Aperture angle - Example of a DC application: 12 needles (BeCu ;epoxy technology), bracket, single row wire wrap connector, ceramic carrier ring, and 4.5 wedge frame Maximum Pin Count Connector 40 Maximum Needle Count Blade 40 Remarks Page 6
7 PCB WEDGE5 Size (mm) 50 x 30 x 1,5 Drill diameter and distance (mm) 3-5 Aperture angle - Maximum Pin Count Connector 40 Maximum Needle Count Blade 40 Example of a mixed RF/DC application: 40GHz IZI-Probe, 6needles (tungsten; metal blade) and boxed IDC header Remarks Can be cut to length < 50 mm Page 7
8 PCB WEDGE-PARALLEL Size (mm) 50 x 40 x 1,5 Drill diameter and distance (mm) 3 10 Aperture angle 2 x C Maximum Pin Count Connector 34 Maximum Needle Count Blade 10 Example of a DC application: Matching Pair left-right, needles (epoxy technology), boxed IDC header, and bracket Remarks Matching pair left-right Page 8
9 PCB URWEDGE Size (mm) 50 x 37 x 1,5 Drill diameter and distance (mm) 3-20 Aperture angle 120 Maximum Pin Count Connector Maximum Needle Count Blade Example of adc application: Urwedge PCB holder, assembled on blank PCB, Holder can be made on wire wrap connector Remarks request Page 9
10 PCB Mini Wedge Size (mm) 30 x 23 x 1,5 Drill diameter and distance (mm) 3-22 Aperture angle 90 Example of a DC application: Mini Wedge Probe Card, bracket, 9 needles (BeCu, epoxy technology) and wire wrap connector Quadrant practicable Maximum Pin Count Connector 22 Maximum Needle Count Blade Remarks Page 10
11 PCB DUAL WEDGE Size (mm) 50 x 22 x 1,5 Drill diameter and distance (mm) 2,3-23 Aperture angle 120 Maximum Pin Count Connector 8 Maximum Needle Count Blade 8 - Example of a RF/DC application: 50GHz dual Z -probe, needles (epoxy technology) and Remarks Assembly of additional wire wrap connector GND-Probes onto IZI Probes Page 11
12 PCB WEDGE KELVIN Size (mm) 50 x 37 x 1,5 Drill diameter and distance (mm) 3-20 Aperture angle 120 Maximum Pin Count Connector 34 Maximum Needle Count Blade 8 Micro Strip Example of a power bypass DC Kelvin application: needles (microstrip; BeCu), and Remarks Signal Trace splitted: F, S mounted power bypass components near the needle tip Page 12
13 PCB LED Card Size (mm) 50 x 80 x 3,2 Drill diameter and distance (mm) 3-20 Aperture angle 120 Example of a LED application: Led Card with probe spider and EEPROM assembled - Maximum Pin Count Connector 34 Maximum Needle Count Blade Remarks Page 13
14 Wedge Probe Card Frame Wedge Probe Card frame, shipment box Size (mm) 114 (4,5 ) x 185 x 3 Remarks Suitable for storage and shipment of Wedge Probe Cards. Can also be taken as Example of an application: mechanical adaptor for 4,5 Wedge Probe Card frame application on a 4,5 Probe Card fixture Probe Card fixtures. Page 14
Kelvin Testing Using a GHz socket for MLF/QFN packages
Kelvin Testing Using a GHz socket for MLF/QFN packages A measurement method called Kelvin probing for measuring resistance allows very accurate measurement of milliohm or sub-milliohm resistance. To accomplish
More informationVEROTEC Electronics Packaging
VEROTEC Electronics Packaging Eurotec Eurotec E u r o t e c c a s e f r a m e s Eurotec CASEFRAMES The Eurotec Caseframe is designed for applications that require the mounting / housing of Eurocard-style
More information3M Assembly Equipment
M Assembly Equipment M TM Presses and Accessories All M TM Assembly Presses are designed to provide proper assembly on M TM Cable and Connectors. These presses, along with a locator plate, achieve accurate
More informationConnectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
More informationQRPGuys Digital RF Probe
QRPGuys Digital RF Probe First, familiarize yourself with the parts and check for all the components. If a part is missing, please contact us and we will send one. This kit contains seventeen 1206 size
More informationAssembly Manual for ISDR-136-KIT
Assembly Manual for ISDR-136-KIT ICAS Enterprises Last Updated March 21 st, 2012 This SDR receiver kit is intended for the 136kHz band. The kit utilizes DIP IC components (no SMD) so that even a beginner
More informationINSTALLATION & OPERATING MANUAL RW SERIES WALL-MOUNT RECTIFIERS
INSTALLATION & OPERATING MANUAL RW SERIES WALL-MOUNT RECTIFIERS WWW.UNIPOWERTELECOM.COM Manual No. RW-1 2008 UNIPOWER Corp. 01/24/08 rw-man All Rights Reserved UNIPOWER Telecom, Division of UNIPOWER Corporation
More informationMaxi and Mini DC-DC Converter Evaluation Board
BRICK FAMILY USER GUIDE Maxi and Mini DC-DC Converter Evaluation Board Features...1 Introduction...2 Set Up + OUT, OUT...3 + S, S...3 Secondary Control (SC)...3 Primary Control (PC)...4 Parallel (PR)...4
More informationOur most IB-C80-HV slit system features an 80 mm x 80 mm aperture and a slit housing compatible with vacuum application of the slit (~1E -5 mbar).
Our most IB-C80-HV slit system features an 80 mm x 80 mm aperture and a slit housing compatible with vacuum application of the slit (~1E -5 mbar). As with our IB-C80-AIR slit, this slit features four individually
More informationOur Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
More informationWilliam Kenyon. Your Single Source For Paper Machine Threading
William Kenyon Your Single Source For Paper Machine Threading Your Single Source For Paper Machine Threading ROPE SHEAVES ROPE TENSIONERS KNIVES & SLITTERS CARRIER ROPE VACUUM CONVEYORS CALENDER THREADERS
More informationIDC-136II-KIT 136kHz DC RX Assembly Guide
IDC-136II-KIT 136kHz DC RX Assembly Guide ICAS Enterprises May 2 nd,2016 The IDC-136II-KIT is a 136kHz direct conversion receiver. Most of the SDR software can be used with this receiver. It is quite easy
More informationFrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
More informationMIG/MAG-Welding Torch Push-Pull Plus
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. MIG/MAG-Welding Torch Push-Pull Plus The "long-range torch" with the Plus The welding torches of the Push-Pull Plus series especially developed
More informationFiveFish Studios PSU-2448Plus+ Assembly Guide
FiveFish Studios PSU-2448Plus+ Assembly Guide Copyright 2015-2017 FiveFish Audio Revision 1.02-20171105 No part of this document may be reproduced, either mechanically or electronically, posted online
More information"Fusion Cuisine" Hybrid Technologies to address MEMS sensors, Magnetics and High Voltage Probing
"Fusion Cuisine" Hybrid Technologies to address MEMS sensors, Magnetics and High Voltage Probing Georg Franz, Dr. Rainer Gaggl T.I.P.S. Messtechnik GmbH Overview Probing Sensors Pressure Sensors Pressurized
More informationicon User s manual Table of Contents section 6 icon module installation and removal
icon User s manual Table of Contents SECTION 1 icon Part Identification SECTION 2 icon Receiver & ITA EnGAGEMENT & Disengagement SECTION 3 icon Receiver mounting SECTION 4 icon ITA cover removal and installation
More informationBuild Manual. for Studying Electrical Conductivity using a 3D Printed 4-Point Probe Station
Build Manual for Studying Electrical Conductivity using a 3D Printed 4-Point Probe Station 1 Materials 1. 3D printed parts Head support Trigger Front Probe head panel Right panel Middle panel Left panel
More informationSpeed For Sale LLC Website: Telephone: Location: 3100 Engineering
Speed For Sale LLC Website: www.speedforsale.com/nissangtrparts Email: Sales@SpeedForSale.com Telephone: 770-777-4774 Location: 3100 Engineering Parkway Alpharetta, GA 30004 SpeedForSale.com s Installation
More informationSMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
More informationIR Gun Assembly Instructions
IR Gun Assembly Instructions Rev 1.01 SenselessDevices.com 1 Description The IR Gun is part of a shooting Arcade project. Together with the target kits, a variety of shooting galleries can be constructed.
More informationPRODUCT PORTFOLIO CONTACT PROBES
PRODUCT PORTFOLIO CONTACT PROBES YOUR PARTNER IN THE CONTACT TECHNOLOGY What makes us special? FEINMETALL is an independent, medium-sized company with a high innovative capacity. Approximately 400 employees
More informationArlo Power Distribution Board Kit Rev B (#28996)
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
More informationHot Rolling Mill. previously possible. As an industry trendsetter, Everloy keeps raising the standard and advancing the Descaling nozzle technologies.
Descaling nozzles are an indispensable part in achieving surface quality in the steel making process. With energy costs rising, demand for difficult grades coming on strong, and an increased need for environmentally
More informationCOMPLETE AND FLEXIBLE SMT SOLUTIONS. dispense ALL. Innovation and quality made in Germany
COMPLETE AND FLEXIBLE SMT SOLUTIONS dispense ALL Innovation and quality made in Germany Basic machine Range of Applications Flexible system for dispensing of lines, dots and areas for underfill and coating
More informationNMNGMC MODULE LIGHTS
Material required for one 4 foot module: NMNGMC MODULE LIGHTS 2 each - Hampton Bay, R20 Black Step Cylinder Track Lighting Model #EC735BK, Home Depot Store SKU # 680-247. 1 package - EcoSmart 60W Equivalent
More informationTROUBLESHOOTING GENERAL SOFTWARE UPLOAD. Troubleshooting 1
TROUBLESHOOTING GENERAL FIXTURE DOES NOT RESET Blown fuse: LEDs on the printed circuit board light up to indicate the power supplies are working. Check / replace the fuses on the circuit board if one or
More informationDocument: LIT-MAN-UNV-2 Rev A 10/21/15
Document: LIT-MAN-UNV-2 Rev A 10/21/15 Limited Warranty This Product is warranted to be free from defects in manufacturing and workmanship and is guaranteed to work for three years or 36,000 miles, or
More informationNoran Tel. Fuse Panel Technical Practice N NCY 4/4TPA & 6/6 GMT NEBS Level 3 Certified
0406-03E August 11, 2005 Fuse Panel Technical Practice N215120-NCY 4/4TPA & 6/6 GMT NEBS Level 3 Certified FEATURES Compatible with +24V, +48V, -24V or -48V dc input voltages (battery voltages). 2 busses
More information1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
More information台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY
C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R
More informationOur Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
More informationSLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks
SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks Instructions June 2002 78-8130-2161-1-B 1 Contents: 1.0 General... 3 2.0 Kit Contents... 3 3.0 Cable Preparation...
More informationOutline diagram. Hopper. Seed drill. Ground. Work Frame. Supporting Frame. Platform. Wheel. Drawbar. 3P Hitch. Camera. Straw Divider.
Machine components Fan Drive shaft connection Platform Hopper Seed Bout Marker Camera Drawbar Supporting Work Frame Monitor Following Harrow Wheel Frame Outline diagram Hopper Seed drill Ground Work Frame
More informationLarge Area and Fine Pitch testing using Silicon Micro-cantilever
Large Area and Fine Pitch testing using Silicon Micro-cantilever June 3 rd 2003 Kim, DONG IL Tel : +82-31-217-6168 Fax : +82-31-217-6169 E-mail : dikim@amst.co.kr Contents 1. Company Introduction 2. Silicon
More informationSite Planning Guide. Staff Workstation Model M Library Systems. Printed in U.S.A. 3M 1999 July
Site Planning Guide Staff Workstation Model 995 3M Library Systems 3M Center, Building 209-1W-09 St. Paul, MN 55144-1000 800-328-0067 www.3m.com\\library Printed in U.S.A. 3M 1999 July 75-0500-2837-4 The
More informationConnector Systems Inc. SS-20 MACHINE MANUAL
Connector Systems Inc. SS-20 MACHINE MANUAL INTRODUCTION Your SS-20 machine comes to you fully equipped and set up to terminate the style of plug you have requested. Our SS-20N will accommodate those
More informationSpare Parts List Hydraulic Cutter
Spare Parts List Hydraulic Cutter CombiCutter CC 4000 CC 4000 002582 Valid from: 07/2002 GB Spare Parts List Hydraulic Cutter CombiCutter CC 4000 Atlas Copco Construction Tools GmbH Atlas Copco Construction
More informationMIG/MAG Welding Torch Push-Pull Plus
T e C h n O l O g y F O r T h e W e l d e r S W O r l d. MIG/MAG Welding Torch Push-Pull Plus The "long-range torch" with the Plus The welding torches of the Push-Pull Plus series especially developed
More informationPeel-off & Pull-out forces for WECO SMD-connectors State:
Peel-off & Pull-out forces for WECO SMD-connectors State: 02.2015 General note: The pull-out or peel-off forces of the solder joint are depending also on the quality of the solder joint and the PCB as
More informationPERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36
MLB610 Line Boring Machine Rev 1.0 Page 1 of 9 DESCRIPTION A versatile and modular line boring machine offering a choice of electric, hydraulic and pneumatic boring bar drive motors, with a mechanical
More informationYOU MUST WEAR SAFETY GLASSES DURING EACH STEP OF THESE INSTRUCTIONS
Machine Racer: Rally Preparation 1. Print the Working Drawing of the design you created and simulated in the Mousetrap Car 2.0 STEM Application. You can find your Working Drawing in the "Outputs" tab of
More informationSL FLAT FLEX CABLE TERMINATOR KIT FOR TM42 PRESS Instruction Manual Order No For and Series Connectors
SL FLAT FLEX CABLE TERMINATOR KIT FOR TM42 PRESS Instruction Manual Order No. 62201-8700 For 70430 and 70431 Series Connectors Œ Description Œ Operation Œ Maintenance Order No ATS-622018700 Release Date:
More informationDO NOT GRIND ANY WELDS! DO NOT QUENCH WELDS WITH WATER OR OIL. ALLOW TO AIR COOL.
1 READ FIRST! PLEASE READ THROUGH ALL OF THE INSTRUCTIONS AND ENSURE THAT YOU UNDERSTAND THEM. BE SURE THAT YOU HAVE ALL THE REQUIRED GSI COMPONENTS, BASIC TOOLS, AND SKILLS. CUTTING THIS KIT REQUIRES
More informationDual-Feed 600A Load Center Frame Power :: 600CB10 and 600CB12 User Manual
Power :: 600CB10 and 600CB12 User Manual 600CB10 - Front View 600CB10-C - Rear View Applies to : 600CB10 :: 600CB10-C :: 600CB10-VL :: 600CB10-CL :: 600CB12 :: 600CB12-C :: 600CB12-VL :: 600CB12-CL Table
More informationHOLE SAWS THE LENOX ADVANTAGE P O W E R T O O L A C C E S S O R I E S
P O W E R T O O L A C C E S S O R I E S HOLE SAWS 14 CUSTOMER SERVICE 877-438-5615 A complete line of premium hole making solutions For metal, wood and abrasives. Unique designs for performance and productivity
More informationengineered to connect Full Product Line
engineered to connect Full Product Line TEST solutions The technical data and specifications of the products shown in this catalogue are for reference only, and apply to products available at the time
More informationINSTALLATION INSTRUCTIONS
144F TABLE OF CONTENTS GENERAL... 2 SPECIFICATIONS... 2 PACKAGE CONTENTS... 2 PACKAGE CONTENTS: ACCESSORIES... 3 REQUIRED TOOLS... 3 ADD-ON COMPONENTS... 3 CABINET MOUNTING WALL MOUNT BRACKET ATTACHMENT...
More informationMultiGig RT Product Family Slot Pitch Density Data Rate RT lines/inch Gbps lines/inch Gbps RT lines/inch 6.50 Gbp
1 MultiGig RT Assembly! # # "$#! MultiGig RT Product Family Slot Pitch Density Data Rate RT1 0.8 113 lines/inch 3.125 Gbps 1.0 141 lines/inch 3.125 Gbps RT2 0.8 85 lines/inch 6.50 Gbps* 1.0 113 lines/inch
More informationInstallation Instructions
Installation Instructions For PTI STEZA C (2x2 Burner Configuration) & PTI STEZB C (3x1 Burner Configuration) Revision E Safe-T-Element Installation Instructions Table of Contents 1. PREPARATION..3 1.1
More informationSMX Lumi-Hub Installation Guide
SMX Lumi-Hub SMX Lumi-Hub Installation Guide 85mm (3.35in) 70mm (2.76in) 85mm (3.35in) 70mm (2.76in) 151mm (5.94in) Lid Removed 53mm (2.09in) Tools Required Small Flat-Blade Screwdriver Large Screwdriver
More informationSMT Place Manncorp 1610 Republic Road Huntingdon Valley, PA PIK-MANN ( )
SMT Place 2000 Benchtop Assembly Station with Integrated Dispense Manncorp 1610 Republic Road Huntingdon Valley, PA 19006 215-830-1200 800-PIK-MANN (800-745-6266) West Coast Office 858-490-6266 888-PIK-MANN
More informationSYSTIMAX GS3 and 1100GS6 Evolve Modular Panel Instructions
860584440 Issue 1, February 2015 SYSTIMAX 360 1100GS3 and 1100GS6 Evolve Modular Panel Instructions General The SYSTIMAX 360 1100GS3 (Cat 6) and 1100GS6 (Cat 6A) Evolve modular panels exceed ISO and TIA
More informationhousevolve Garage Door Controller User Manual and Installation Guide
housevolve Garage Door Controller User Manual and Installation Guide Introduction Thank you for purchasing a FREEVOLVE product. We designed it to provide you with years of reliable service. The following
More informationLG CORVETTE GT2 COIL OVERS
LG CORVETTE GT2 COIL OVERS THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963 Parts Inventory: 1. Assembled Front shock and spring 2. Assembled Rear shock and spring
More informationAutomotive. Breakdown voltage. Type = Popular type (Picture scale: DIN A4) Max. switching voltage. Switching current (Min.
Coil Breakdown s to coil PCB relays CT Single:17. x 7.2 x 13.5mm Twin:17. x 1 x 13.5mm Super miniature size ACT512 layout = layout of 2 x ACT112 H-bridge type (twin Quiet operation (N.O.) (N.C.) 1c, 8mW
More informationQuickstepper FSS Key features
Key features Description Pneumatic/mechanical sequencer with 12 steps and start logic circuits Ready-to-install sequence controller Acknowledgement-controlled motion sequences The Quickstepper is a mini
More informationFord 6.7L Installation of the Guardian Safety System
Ford 6.7L Installation of the Guardian Safety System Diesel Tech Industries Ltd. 14215-120 Avenue Edmonton, Alberta, Canada T5L 2R8 Phone: (780) 455-9876 info@dtiguardian.com www.dtiguardian.com DTI05-02.01/13
More informationEMLock 1500 Series. MEA Listed
EMLock 1500 Series SDC s patented EMLock design represents the pinnacle of magnetic lock evolution. The modular EMLock assembly makes them easy to stock, install, upgrade and maintain. Patented SDC 1500
More informationLouvre systems. Series WL Standard weather louvres. Incorporating. Standard range of single bank louvres as used in countless installations worldwide
Louvre systems Incorporating Series WL Standard range of single bank louvres as used in countless installations worldwide Good resistance to water ingress, with low resistance to airflow Approximately
More informationUno Compatible Pogobed Kit
Uno Compatible Pogobed Kit Intermediate Level The pogobed kit is a hardware fixture that enables you to temporarily connect from your Arduino development board to any Arduino shield. Using the springloaded
More informationSmall-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
More informationScrew-in melt thermocouples
JUMO Instrument Co. td. Data sheet 901090 Page 1/5 k Temperature range from -40... +600 C k Available with different thermocouples k Stainless steel thermowell and probe tip k Structure insulated or connected
More informationAgilent G5632 Valve Kit Instructions
Agilent G5632 Valve Kit Instructions Agilent G5632 Valve Kit Instructions Contents Typical Applications 2 Alternating Column Regeneration (2 position/10 port valves only) 2 Dual column selection 3 Sample
More informationAPPLICATION NOTES INTRODUCTION OBJECTIVE ISSUES
APPLICATION NOTES Sumanto Pal 11/13/2015 This application note is a document showing the uses and applications of the robot base built for the agbot. It will also showcase how the base was built, using
More informationThe N4YG DDS VFO and the Drake TR7
The N4YG DDS VFO and the Drake TR7 Overview This document describes the installation of a N4YG DDS VFO into my Drake TR7 transceiver. The VFO is a terrific improvement over the original PTO and adds function
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationINSTALLATION MANUAL FOR
MOUNTING LOCATION Reader RD- FOR RF CONTROLLER VIZIT-KTM60 R, EXIT 00M BUTTON This manual is intended as an addition to operating instructions on your access control system (ACS) units to guide through
More informationPHEV Conversion Kit User Manual
PHEV Conversion Kit User Manual for 2003-2009 Prius Warning: You are strongly recommended to have a specialist to undertake this installation! High Voltage (HV) Direct Current (DC) Warning: Traction battery
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationJBR MAZDASPEED
Page1 james Barone Racing Aftermarket Parts and Accessories JBR 2007 2009 MAZDASPEED 3 Front Mount Intercooler Piping Kit Installation Instructions for TR8 Intercooler Tooling: o Jack, Jack Stands, Ramps
More informationPlastic Diffusers & Grilles
Diffusers & Grilles No rust, no corrosion Won t fade or yellow Scratches don t show No painting or repainting Won t bend Mildew resistant Consistent smooth finish Indistinguishable from metal when installed
More information"Spreading in the broad sense" 5 ranges 22 models
Ref.: 2098761662 EN Muck Spreader Programme JOSKIN 2013. Non-contractual document. Data can change without notice. The pictures do not necessary correspond to standard equipment. www.joskin.com "Spreading
More informationEnDuraLast II Charging System Installation Guidlines
EnDuraLast II Charging System Installation Guidlines Notes & Disclaimers: The installation of this charging system assumes the installing technician has basic mechanical and electrical skills. Please understand
More informationEffective May 2017 Supersedes December 2004 (S )
Reclosers MN280054EN Effective May 2017 Supersedes December 2004 (S280-15-10) COOPER POWER Types L, V4L, E, 4E, and V4E; KA785L10S, KA785L20S, KA785L30S, and KA785L40S Automation upgrade kit installation
More informationHigh Pressure Access Systems
High Pressure Access Systems Operation and Maintenance Manual Metal Samples Company A Division of Alabama Specialty Products, Inc. 152 Metal Samples Rd., Munford, AL 36268 Phone: (256) 358-4202 Fax: (256)
More informationModular fully-automated folding machine. 6+4-buckle modular concept allows for a variety of fold patterns to cover many applications.
Modular fully-automated folding machine. 6+4-buckle modular concept allows for a variety of fold patterns to cover many applications. This folder is designed with Horizon s concept which leads the finishing
More informationINTELLIQUILTER INSTALLATION ON PRODIGY VERSION
INTELLIQUILTER INSTALLATION ON PRODIGY VERSION 05.09.16 1. COMPUTER BRACKET Remove the drop-in nuts from the tablet mounting bracket and insert them in the slots at the top of the upper arm, just behind
More information4-14 HD Line Boring Machine And Accessories Catalogue
4-14 HD Line Boring Machine And Accessories Catalogue Manual Hydraulic Bar Drive Used with 5HP power unit Proportional Hydraulic Bar Drive Used with 10HP power unit Portable - Powerful - Flexible - Easy
More informationU9810PD PANEL DISPLAY INSTALLATION INSTRUCTIONS
U9810PD DISPLAY INSTALLATION INSTRUCTIONS Panel Display Mounting and Installation The model U9810PD Panel Display (DCCI P/N 40879G-01) is an integral and necessary part of the Series 9800 System (ref.
More informationAMERICAN STOVE APPLICATION ARTICLE: DRAFT (Rev. 3: 2/27/08) Precision Dispensing of Epoxy for Engraved Parts
FISHMAN CORPORATION AMERICAN STOVE APPLICATION ARTICLE: DRAFT (Rev. 3: 2/27/08) Title: Precision Dispensing of Epoxy for Engraved Parts Author: Scott Beebe, President of Fishman Corporation The need to
More informationCAL EMI/EMC Testing History and Plans 14 April 2004
Testing History and Plans 14 April 2004 Johnson, Ampe, Dizon, Raynor, Lovellette Oscar Ferreira LLR Ecole Polytechnique wnjohnson 1 EM CAL Module Attempted LAT qualification program for EMI/EMC specifications.
More information2xVCX version 1.0. Calibration instructions can be found on the last page. Capacitor bypass MLCC X7R mm pin pitch
Produced by: Roll Your Own ljunggrenaudio.com Schematic & PCB Design by: KYMATICA DEVICES www.kymatica.com xvcx version.0 Bills Of Material Bold = PCB C C C3 C4 C5 C6 C7 C8 C9 C0 C C C3 C4 CON D D D3 D4
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer
More informationAgilent Valve Kit G4231A/B and G4232A/B/C
Agilent Valve Kit G4231A/B and G4232A/B/C Instructions Contents Typical Applications 2 Dual column selection (G4231A/B or G4232A/B/C) 2 Sample enrichment and sample cleanup (G4231A/B or G4232A/B/C) 2 Alternating
More informationELECTRONIC HID BALLASTS
Overview Just as electronic ballast technology enhanced fluorescent lighting systems, electronic HID ballasts bring significant performance improvements to HID lighting systems: Higher efficiency Greater
More informationINTELLIQUILTER INSTALLATION ON APQS MILENNIUM/FREEDOM/ULTIMATE-I VERSION
INTELLIQUILTER INSTALLATION ON APQS MILENNIUM/FREEDOM/ULTIMATE-I VERSION 10.18.13 If EdgeRider wheels are included in the conversion kit, install them first, following the instructions in the packaging
More informationIFC-BL02 Interface Free Controller Brushless Motor Card
IFC-BL02 Interface Free Controller Brushless Motor Card User s Manual V1.1 Apr 2008 Information contained in this publication regarding device applications and the like is intended through suggestion only
More informationHP Heat Exchanger Unit Heater
Unit Heater Ruffneck are extra heavy duty (including heavy gauge steel construction) to meet the most demanding service and long life requirements for rugged industrial applications, such as space heating
More informationWilliam Kenyon. Your Single Source For Paper Machine Threading
William Kenyon Your Single Source For Paper Machine Threading Your Single Source For Paper Machine Threading ROPE SHEAVES ROPE TENSIONERS KNIVES & SLITTERS CARRIER ROPE MOUNTING HARDWARE William Kenyon
More informationi3a Evaluation Board Manual
i3a Evaluation Board Manual TDK Lambda Evaluation Board P/N i3a5a8a-00-evk-dpp Table of Contents Getting Started with the i3a Before Using the Eval Board...3 Device Introduction... 4 Evaluation Board Introduction
More informationCCL LLC 88 Black Falcon Ave., Ste. 247, Boston, MA USA Contact: Antea Risso
88 Black Falcon Ave., Ste. 247, Boston, MA 02210 USA Contact: Antea Risso Digi-Key Corporation e-mail: antea@arduino.org 701 Brooks Ave.South PRODUCT CHANGE NOTIFICATION Thief River Falls, MN 5670 January
More informationUSING STANDARD x1 and x10 OSCILLOSCOPE PROBES WITH THE TEKTRONIX 222PS OSCILLOSCOPE:
USING STANDARD x1 and x10 OSCILLOSCOPE PROBES WITH THE TEKTRONIX 222PS OSCILLOSCOPE: & REPLACING the 222PS Battery Dr. H. Holden 2013. WARNING: The original Tektronix P850 and P400 probes(now hard to get)
More information.050 Allen key 1.5mm Allen key 1/16 Allen key 5/64 Allen key 3/32 Allen key Turnbuckle & 3/16 wrench
1 Thank you for purchasing the Outlaw 4 Sprint Car! The Outlaw sprint car platform has been developed for loose dirt buggy tire racing. In this kit you will find the 4 th evolution of the car which features
More informationLightened Thermal Clamps Amphenol Series LTC
Lightened Thermal Clamps Amphenol Series LTC MAIN CHARACTERISTICS MAXIMUM RELIABILITY QUICK LOCKING AND UNLOCKING : Unlike others on the market, Series LTC thermal clamps feature a quick, quarter-turn
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationShay Plumbing VII - Engine Steam & Exhaust Pipes
Shay Plumbing VII - Engine Steam & Exhaust Pipes Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 11/18/03 Last Revised: 06/06/2004 Fabricating the engine steam and exhaust pipes seem to be the last
More informationFeature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner
Wire Wound Chip Inductor-WL Series Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip
More informationJAMISON-B.M.P. INDUSTRIAL RAPID DOORS Frigo 2 Replacement Parts List
JAMISON-B.M.P. INDUSTRIAL RAPID DOORS Frigo 2 Replacement Parts List JAMISON DOOR COMPANY P.O. BOX 70 HAGERSTOWN, MARYLAND 21741 USA 1-800-532-3667 301-733-3100 INTERNET: http://www.jamisondoor.com E-MAIL:
More informationV2M1200/1290 Series Maglock Installation Instructions
Securitron Phoenix, AZ 85044 Tel: 1-800-624-5625 Mon-Fri: 6:00am - 4:00pm PDT Fax: 1-800-232-7329 www.securitron.com V2M1200/1290 Series Maglock Installation Instructions 1 Table of Contents Product Information...
More information