Self-Propelled Track Beast Recyclers / Horizontal Grinders

Size: px

Start display at page:

Download "Self-Propelled Track Beast Recyclers / Horizontal Grinders"

Brent Fletcher
5 years ago
Views:

Self-Propelled Track Beast Recyclers / Horizontal Grinders Model 2680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders The Model 2680 Track Beast Recycler is designed for tree services,

1 Self-Propelled Track Beast Recyclers / Horizontal Grinders Model 2680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders The Model 2680 Track Beast Recycler is designed for tree services, loggers, governmental agencies, and land clearing contractors looking for a heavy-duty grinder that can be maneuvered around job sites. Production from the Model 2680 Track can exceed 300 yards per hour depending on the material being processed, which can include brush, logs, whole trees, stumps, logging waste, land clearing waste, construction and demolition debris, railroad ties, telephone poles, sawmill waste, pallets, slabs, bark, and chunk wood. This unit is effective in converting a variety of unwanted materials into usable products like compost, landscaping mulch, boiler fuel, animal bedding and more. It features a 24" diameter capacity with its 24" x 60" mill opening and engine options ranging from 440 to 540 horsepower. The Model 2680 Track sits atop a Caterpillar Model 320L steel track undercarriage with 600 mm, 23 5/8" wide track pads in either a single or double grouser format. The Model 2680 Track is equipped with the patented Bandit cuttermill, which has proven to be the most efficient means of breaking down a wide variety of materials. With a Bandit cuttermill you have the option of cutting, splitting, grinding and chipping with the opportunity to mix and match cutting devices to allow for the production of uniform material with varying sizes. The cuttermill turns downward, which not only helps to pull material into the mill but also allows it to be positioned for a decisive splitting action similar to an axe rather than a more violent, intensive, and less effective hammering action found on other grinding platforms. The result is less vibration, less fuel consumption, and more structural integrity when compared to machines that carry more weight and horsepower. The Model 2680 Track features a 60-tooth setup on its cuttermill, allowing it to process a wide array of materials with ease with its 48" diameter by 63" wide dimensions. Different combinations and styles of cutterbodies and teeth can be configured to control the amount of bite, assist in forwarding material through the screening system, and dial in the preferred size and consistency of the end product. A chipper knife set-up can also be equipped on the Model 2680 Track, allowing it to produce a dimensional, screened chip that can be used for fuel and other applications demanding a consistent, high-quality, precisely-sized chip. A single-speed 13'-6" long by 60" wide double slat design track-type infeed conveyor bed chain serves material to the cuttermill at 20 feet per minute on the Model 2680 Track, where it is captured by a 24" diameter x 60" wide internally driven floating top feed wheel. The cutting action is performed against the infeed chain which eliminates the need for an anvil, thus there is not a gap that is created between the chain and an anvil for materials to collect and wedge. Component weight is distributed and supported on a sturdy frame constructed from 1/4" thick steel with 20" deep formed high tensile steel plating and cross-section bracing using continuous welds for structural integrity as opposed to bolt-together techniques. Thus, the Model 2680 Track possesses the necessary physical reinforcement to stand tall for many years of service. With regard to how you want your material delivered, the Model 2680 Track offers plenty of choices when it comes to discharge options. The standard discharge conveyor is 18' long x 4' wide, single-speed at 280 feet per minute, and has an approximate stacking height of 12'-5". From this standard discharge you have the option of adding a 42" diameter hydraulic thrower for loading end opening chip vans or broadcasting chips over a site. This device is mounted at the end of the conveyor and will swing 25 degrees side-to-side (50 degrees total), 34 degrees up, and 12 degrees down to give you directional control of placing your chips. Furthermore, you can opt out of the standard discharge and thrower and go with a 27-1/2' long x 4' wide, two-speed (up to 480 feet per minute), height adjustable discharge system. This discharge can be moved down 20 degrees or up 32 degrees to reach a maximum stacking height of 15' and includes a magnetic head pulley located at the end of the discharge for retrieving metal fragments or nails out of the flow of ground product. Finally, there is an innovative swinging / pivoting discharge system that is controlled by radio remote control that features both a primary and secondary discharge. The secondary discharge pivots side-to-side 45 degrees with a maximum discharge height of 17'-6". This total folding discharge system can extend to 30' in length and also includes a magnetic head pulley. Controlling your mobile Model 2680 Track is easy with a user-friendly radio remote control. The remote, along with tether remote back-up and 50' of cord, controls the yoke, infeed conveyor, discharge conveyor, engine throttle, and track functions from a comfortable distance. Customize your Model 2680 Track to the fullest with many productivity enhancing options. While a tether remote control comes standard, a radio remote is also available permitting an operator to control the unit from an auxiliary loader feeding the grinder. For sizing material, select from a variety of square, rounded, baffled, or

2 diamond screens ranging from 5/8" to 7" in diameter and gates up to 5" in diameter. Other add-ons worth considering are a higher mill opening, feed speed drive package, engine pre-cleaner, reversing fan options, and an air compressor. A full palette of standard and custom paint colors give you the freedom to choose the look to fit your brand or company. The self-propelled Model 2680 Track, as with all Bandit Beast Recyclers, is designed and equipped with operator safety, user-friendly control, fuel efficiency, and simplified maintenance in mind. Components that are easily accessible save time on routine maintenance schedules and reduce downtime by being more serviceable out in the field. Feel free to contact a sales representative and ask about fuel savings statistics and production numbers based on your individual situation and needs. These factors, in combination with above-and-beyond factory support for your success, have proven over time that choosing a Bandit Beast Recycler is the best economical decision you can make for a long-term investment in a horizontal grinder.

3 STANDARD EQUIPMENT Horizontal feed with a 42" diameter cut radius and a 63" wide cutter mill Repaceable cutter anvil

4 24" diameter x 60" wide top feed wheel. Driven by (1) 12.2 cubic inch hydraulic motor with gearbox. Also features 1 3/4" feed wheel teeth located around and on sides of feed wheel. Reversing Auto Feed System Debris augers Radio remote control with tether remote back-up and 50' of cord (Controls yoke up, infeed conveyor forward/reverse, discharge conveyor start/stop, engine throttle, track functions, and engine e-stop). 13' 6" long x 60" wide double slat design track-type infeed conveyor bed chain with single speed drive (20 FPM). Driven by (1) 24 cu in hydraulic motor with gear box / chain drive combination. Electric over hydraulic shut down switches located on all four corners of machine High capacity fold away radiator debris screen 18' long x 4' wide single speed (280 FPM) stationary discharge system. (Has an approximate stacking height of 12' 5") 150 gallon hydraulic tank with magnetic drain plug and aluminum fluid sight gauge 250 gallon fuel tank with magnetic drain plug and aluminum fluid sight gauge Safety DVD, (2) 6" wide x 9" tall Bandit operator's manuals (one paper copy and one waterproof copy tethered to machine) and (1) engine operator's manual Fire extinguisher with mount Lockable control cabinets with engine control panel Screen changing arm Banded Kevlar drive belts with belt shield Liquid dust suppression system with spray nozzles (3) heat actuated fire suppression bombs PAINT SELECTION Standard Imron Industrial Urethane Bandit Yellow (For Whole Tree Chippers please specify Chipper Guard paint color) Standard Imron Industrial Urethane Alert Orange (For Whole Tree Chippers please specify Chipper Guard paint color) Standard Imron Industrial Urethane Cat. Yellow (For Whole Tree Chippers please specify Chipper Guard paint color) Standard Imron Industrial Urethane Green (For Whole Tree Chippers please specify Chipper Guard paint color) Standard Imron Industrial Urethane White (For Whole Tree Chippers please specify Chipper Guard paint color) Standard Imron Industrial Urethane Black (For Whole Tree Chippers please specify Chipper Guard paint color) Special Imron Industrial Paint (please specify paint color and number) Special Imron 5000 Paint (please specify paint color and number) BEAST PACKAGE SELECTION Swinging / pivoting discharge (controlled by radio remote control), features a primary and secondary discharge, secondary discharge pivots side to side 45 degrees with a maximum discharge height of 17' 6". Total discharge is 30' long x 4' wide single speed (280 FPM) folding discharge system. Also includes magnetic head pulley located at the end of the discharge. (Must select radio remote and tri-axle option). 42" diameter hydraulic thrower for loading end opening chip vans or broadcasting chips over a site. Unit is mounted at the end of the discharge conveyor and will swing 25 degrees side to side (50 degrees total), 34 degrees up and 12 degrees down. (Note discharge will be a stationary 18' long x 4' wide set-up). 27 1/2' long x 4' wide single speed (280 FPM) height adjustable discharge system. Discharge will go down 20 degrees and up 32 degrees. (Has a maximum approximate stacking height of 15'). (Magnetic head IS NOT is not included in price and will need selected separately if needed). ENGINE SELECTION Caterpillar C13, 440 horsepower without clutch - Tier 4i Caterpillar C15, 540 horsepower without clutch - Tier 4i Caterpillar C18, 765 horsepower without clutch - Tier 2 Caterpillar C18, 765 horsepower with reversing fan and without clutch (short package for overseas) - Tier 2 Cummins QSK-19, 800-HP without clutch (Includes Flexxaire reversing fan) - Tier 2 TRACK SELECTION Caterpillar Model 320L steel track undercarriage (600 MM, 23 5/8" wide track pads), double grouser Caterpillar Model 320L steel track undercarriage (600 MM, 23 5/8" wide track pads), single grouser CLUTCH SELECTION

5 HPTO14 PT Tech fluid clutch BEAST HEAD SELECTION 30 tooth cutterhead option in lieu of 60 BEAST CUTTERBODY SELECTION Standard Model 2680/3680 cutterbody - Swept Beam to be installed on machine (60 required for full set) Tooth holder cutterbody with replaceable raker insert holder (swept beam) (less insert) to be installed on machine (must select teeth, rakers, and raker insert bolts) Chipper knife holder cutterbody to be installed on machine (30 or 60 required for full set) BEAST TEETH/KNIFE SELECTION 1" XT carbide splitter tooth to be installed on machine (Used in most applications and is especially popular in land clearing applications and are often used by themselves or with carbide cutters, Butcher teeth, or G55 grinding teeth) XT Short Shingle tooth (pointed) to be installed on machine (A cutter style tooth with thicker carbide. Highly effective in processing shingles and are an excellent for grinding typical green waste) XT Short Shingle fan tooth (pointed) to be installed on machine (Regulates the amount of bite and pushes material through the screen, usually used in conjunction with shingle teeth) XT Helmet Head carbide tooth to be installed on machine (Excellent tooth for pallet and construction waste. Often used when processing light green waste, logging slash, and sawmill waste) XT blunt-nose carbide splitter fan forged tooth to be installed on machine (Thicker carbide splitter style tooth that will last longer than the 1" splitter tooth. Can be used in the same applications as the 1" splitter tooth) XT carbide forged splitter fan tooth to be installed on machine (features all of the benefits of a normal splitter tooth, plus the benefits of a fan tooth all in one. Very popular in land clearing and green waste applications and for processing pallets) XT Forged tooth with Lincor 55-G carbide impregnated weld to be installed on machine (Good tooth choice when grinding brush, light green waste, pallets, C & D. Good solution for material that contains contamination) 45 degree carbide raker insert (for logs and chunk wood) to be installed on machine 90 degree carbide raker insert (for leaves, and regrind) to be installed on machine Raker insert bolt (3/4-10 X 2 1/4" grade 8) to be installed on machine 34 1/2 degree Chipper knife (1/2" x 2 1/8" x 4") to be installed on machine (to be selected with knife style cutterbodies, p/n ) ((26 required for 1680, 2680 and 3680 can have 30 or 60. If 30 knives are selected, you must also select 30 blank weight blocks)) Counter knife blank to be installed on machine. To be used in most applications, including Bio-Sawdust. (To be selected in lieu of counter-knife for these applications). Counter knife (3/8" x 2" x 3") to be installed on machine (The counter-knife blank replaces this item, but this option should still be used to produce a larger product). Blank fan tooth for chipper knife set-up to be installed on machine Blank weight block to be installed on machine 3/4-16 flange hex nuts for chipper knives to be installed on machine (to be selected with p/n ) Double splitter tooth to be installed on machine (to be used on knife style cutterbody only p/n ) Double flat carbide tooth to be installed on machine (to be used on knife style cutterbody only p/n ) Double NR26 tooth to be installed on machine (to be used on knife style cutterbody only p/n ) XT 1" carbide tooth with double thick carbide to be installed on machine (Tooth of choice for processing big wood. These teeth require less power to drive the tooth through the material) SCREENS SELECTION 1/2" thick, 3/4" modified diamond screen to be installed on machine 3/4" thick, 1" modified diamond screen to be installed on machine 3/4" thick, 1-1/2" modified diamond screen to be installed on machine 3/4" thick, 2" modified diamond screen to be installed on machine 3/4" thick,3" modified diamond screen to be installed on machine 3/4" thick, 4" modified diamond screen to be installed on machine 3/4" thick, 5" modified diamond screen to be installed on machine 3/4" thick, 6" modified diamond screen to be installed on machine 3/4" thick, 7" modified diamond screen to be installed on machine 3/4" thick, 1" round screen to be installed on machine

6 3/4" thick, 2" round screen to be installed on machine 3/4" thick, 3" round screen to be installed on machine 3/4" thick, 4" round screen to be installed on machine 3/4" thick, 1" square screen to be installed on machine 3/4" thick, 2" square screen to be installed on machine 3/4" thick, 3" square screen to be installed on machine 3/4" thick, 4" square screen to be installed on machine Demo-green landclearing/c&d screen to be installed on machine 3/4" thick, 1" square baffle screen to be installed on machine 3/4" thick, 1 1/2" square baffle screen to be installed on machine 3/4" thick, 2" square baffle screen to be installed on machine 3/4" thick, 3" square baffle screen to be installed on machine 3/4" thick, 4" square baffle screen to be installed on machine GATES SELECTION 1/2" thick, 3/4" modified diamond drop gate to be installed on machine 3/4" thick, 1" modified diamond drop gate to be installed on machine 3/4" thick, 1-1/2" modified drop gate to be installed on machine 3/4" thick, 2" modified diamond drop gate to be installed on machine 3/4" thick,3" modified diamond drop gate to be installed on machine 3/4" thick, 4" modified diamond drop gate to be installed on machine 3/4" thick, 5" modified diamond drop gate to be installed on machine 3/4" thick, 1" round drop gate to be installed on machine 3/4" thick, 2" round drop gate to be installed on machine 3/4" thick, 3" round drop gate to be installed on machine 3/4" thick, 1" square drop gate to be installed on machine 3/4" thick, 2" square drop gate to be installed on machine 3/4" thick, 3" square drop gate to be installed on machine 3/4" thick, 1" square baffle drop gate to be installed on machine 3/4" thick, 2" square baffle drop gate to be installed on machine 3/4" thick, 3" square baffle drop gate to be installed on machine TRACK OPTIONS Rock guards for 320/325 steel track undercarriage FEED SYSTEM OPTIONS 29 1/2" diameter x 60" wide top feed wheel. Also features 1 3/4" feed wheel teeth located around and on sides of feed wheel. 35" high x 60" wide mill opening in lieu of standard Feed speed drive package for infeed and discharge conveyors. (Includes 3-speed infeed conveyor and 2-speed discharge conveyor drives). (Must select radio remote control option) Infeed and discharge speed toggle controls to be added to remote control (Must select radio remote option and feed speed drive package on Model 2680) INFEED OPTIONS Bolt on replaceable side infeed wings Hydraulic infeed chain lock Wide flair infeed (new style) Steel fold down infeed tray ENGINE RELATED OPTIONS 43" diameter Flexxaire full variable pitch auto reversing cooling fan for Caterpillar C15 engines (Prevents engine overheating, improves machine efficiency and reduces fuel consumption)

7 48" diameter Flexxaire full variable pitch auto reversing cooling fan for Caterpillar C18 engines (Prevents engine overheating, improves machine efficiency and reduces fuel consumption) (Available on Caterpillar C15 & C18 engines) Flexxaire full variable pitch auto reversing cooling fan for Cummins QSL9, QSM11 and QSX15 engines (Prevents engine overheating, improves machine efficiency and reduces fuel consumption) 110 volt engine block and 120 volt hydraulic tank heater for Cummins engines Proheat Engine Heater Engine pre-cleaner - Engine Air Replaceable roof made of abrasion resistant steel above cuttermill DISCHARGE OPTIONS 30' long x 4' wide single speed (280 FPM) folding discharge system. (Has an approximate stacking height of 17' 6") Magnetic head pulley HYDRAULIC OPTIONS Infeed and feed wheel flow control kit (Must select feed speed drive package option on Model 2680's) EXTENDED WARRANTY OPTIONS 5 year / 5,000 hour 'Platinum' Caterpillar engine warranty (C18 engines) (For Caterpillar C15 engines) MISCELLANEOUS OPTIONS Air compressor with 13 horsepower Honda gas engine, battery disconnect, 50' hose, and 24 gallon air tank. Also Includes: (1) Ingersol-Rand Model IR2141 (3/4" drive) air wrench, (1) 1 1/2" impact socket for cutterbody bolts, (1) 1 15/16" impact socket for tooth nuts, (1) 1 1/8" impact socket, and quick couplers and hose. Fan purge on controller 25' hose reel for air compressor Special side decal applied to each side of infeed hopper 44 point automatic greaser system with timer BEAST HEAD OPTIONS Chipper drum for Beast with knives & holders to be installed on machine (10 knife) (Note: this option does NOT include the standard mill) Chipper drum for Beast with knives & holders to be shipped loose (10 knife) (Note: this option DOES include the standard mill) BEAST CUTTERBODY OPTIONS Replaceable raker cutterbody with swept beam (to be shipped loose (60) required for full set) Tooth holder cutterbody with thicker web to be shipped loose Chipper knife holder cutterbody to be shipped loose BEAST TEETH/KNIFE OPTIONS XT carbide splitter tooth to be shipped loose XT 1" carbide cutter tooth with double thick carbide to be shipped loose XT carbide forged splitter fan tooth to be shipped loose XT blunt-nose carbide forged splitter fan tooth to be shipped loose XT Helmet Head carbide tooth to be shipped loose XT Oversized splitter carbide tooth to be shipped loose XT Forged tooth with Lincor 55-G carbide impregnated weld to be shipped loose 45 degree carbide raker insert (for logs and chunk wood) to be shipped loose 90 degree carbide raker insert (for shingles, leaves, and regrind) to be shipped loose Raker insert bolt (3/4-10 X 2 1/4" grade 8) to be shipped loose 34 1/2 degree chipper knife (1/2" x 2 1/8" x 4") to be shipped loose Counter knife blank to be shipped loose. To be used in most applications, including Bio-Sawdust. (To be selected in lieu of counter-knife for these applications). Counter knife (3/8" x 2" x 3") to be shipped loose (The counter-knife blank replaces this item, but should still be used to produce a larger product). Blank weight block to be shipped loose 3/4" x 3" stub for chipper knives to be shipped loose

8 3/4-16 flange hex nuts for chipper knives to be shipped loose Blank fan tooth for chipper knife set-up to be shipped loose Double splitter tooth to be shipped loose (to be used on knife style cutterbody only p/n ) Double flat carbide tooth to be shipped loose (to be used on knife style cutterbody only p/n ) Double NR26 tooth to be shipped loose (to be used on knife style cutterbody only p/n ) SCREEN OPTIONS 1/2" thick, 3/4" modified diamond screen to be shipped loose 3/4" thick, 1" modified diamond screen to be shipped loose 3/4" thick, 1-1/2" modified diamond screen to be shipped loose 3/4" thick, 2" modified diamond screen to be shipped loose 3/4" thick,3" modified diamond screen to be shipped loose 3/4" thick, 4" modified diamond screen to be shipped loose 3/4" thick, 5" modified diamond screen to be shipped loose 3/4" thick, 6" modified diamond screen to be shipped loose 3/4" thick, 7" modified diamond screen to be shipped loose 3/4" thick, 1" round screen to be shipped loose 3/4" thick, 2" round screen to be shipped loose 3/4" thick, 3" round screen to be shipped loose 3/4" thick, 4" round screen to be shipped loose 3/4" thick, 1" square screen to be shipped loose 3/4" thick, 2" square screen to be shipped loose 3/4" thick, 3" square screen to be shipped loose 3/4" thick, 4" square screen to be shipped loose Demo-green landclearing/c&d screen to be shipped loose 3/4" thick, 1" square baffle screen to be shipped loose 3/4" thick, 1 1/2" square baffle screen to be shipped loose 3/4" thick, 2" square baffle screen to be shipped loose 3/4" thick, 3" square baffle screen to be shipped loose 3/4" thick, 4" square baffle screen to be shipped loose BEAST GATE OPTIONS 3/4" thick, 1" modified diamond drop gate to be shipped loose 3/4" thick, 1-1/2" modified drop gate to be shipped loose 1/2" thick, 3/4" modified diamond drop gate to be shipped loose 3/4" thick, 2" modified diamond drop gate to be shipped loose 3/4" thick,3" modified diamond drop gate to be shipped loose 3/4" thick, 4" modified diamond drop gate to be shipped loose 3/4" thick, 5" modified diamond drop gate to be shipped loose 3/4" thick, 1" round drop gate to be shipped loose 3/4" thick, 2" round drop gate to be shipped loose 3/4" thick, 3" round drop gate to be shipped loose 3/4" thick, 1" square drop gate to be shipped loose 3/4" thick, 2" square drop gate to be shipped loose 3/4" thick, 3" square drop gate to be shipped loose 3/4" thick, 1" square baffle drop gate to be shipped loose 3/4" thick, 2" square baffle drop gate to be shipped loose 3/4" thick, 3" square baffle drop gate to be shipped loose For detailed specifications please contact your local authorized Bandit dealer. No used equipment listings of this model available at this time.

Drum-Style Hand Fed Brush Chippers

Search... Home Bandit Industries Corporate About Us Product Line Quality/Innovation Media News/Stories Guidance Service/Support Shop Used Equipment Contact Us Our Network Drum-Style Hand Fed Brush Chippers