Spec # Information Requested Answer

Transcription

1 Price quote for: Engine Driven Brush Chipper File: C Vendor Name: Contact Person: Street Address: City, State, Zip Phone #: Toll Free #: Fax #: Address: Tri-State Bobcat, Inc Nick Kentros 3101 Spruce St Little Canada, MN Spec # Information Requested Answer Furnish separate price quote for: Engine Driven Brush Chipper 1.0 Engine Driven Brush Chipper Make & Model Bandit 280XP HD Brush Bandit Chipper inch capacity 18" Weight 12,500 lbs (approximate) Engine type, model, HP, etc. Perkins 1106C, hp - Tier 3 *while supplies available Fuel tank size 60 gallons Battery size (CCA) 1,400 Instrumentation Voltage, Amp, Temperature gauges Trailer tires (4) 235/85R 16" Trailer suspension type & capacity Tandem 7000 pound Torflex EZ lube axles Trailer Brakes Electric Brakes Trailer hitch type 2-1/2" Pintle Ring Feed table length 66" Distance from feed roller to ground 88" Feed rate 100 FPM Feed roller size and configuration (2) 20" wide x 10-5/8" diameter, horizontal Chipper cutting wheel size 55" diameter x 2" thick Number of chipper knives 6 Knife description information (4) 1/2" thick x 4-1/2" wide x 7-1/4" long (2) 1/2" thick x 4-1/2" wide x 5-1/8" long Height of discharge chute 9' 6" Chute rotation Manual 345 degree w/12" adj. chip deflector Hydraulic tank capacity 32 gallons

2 Warranty 1 year or 2000 hrs plus 5 year Bandit manufactured related to disc, drum & slide box components Base Price $49,531.70

3 VENDOR NAME: Tri-State Bobcat, Inc MAKE AND MODEL OFFERED: Bandit 280XP HD (18" Disc Style) Brush Bandit Spec # Description Qty Price Subtotal ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with 2.1, 2.2, etc., until you have listed all engine options. Use as many numbers as you need. John Deere 4045HFC93, 173 horsepower engine with over center style clutch - Tier 4i (Includes Bandit control panel and reversing auto feed along with 2 year / 2,000 hour warranty) 1 10, $ $ 10, Caterpillar C6.6L, horsepower with over center style clutch - Tier 3 *while supplies available 1 $ $ John Deere 6068HFC08, 200 horsepower engine with over center style clutch - Tier 4 final (Includes Bandit control panel and reversing auto feed along with 2 year / 2,000 hour engine warranty) 1 $ 28, $ 28, Caterpillar C6.6L, 213 horsepower with over center style clutch - Tier 3 *while supplies available 1 $ 1, $ 1, Perkins 1206E-E70TTA, 225 horsepower engine with over center style clutch - Tier 4i (Includes Bandit control system and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 13, $ 13, Reversing Auto Feed with digital tach/hour meter (Units with heavy-duty or super-sized feed system) 1 $ 1, $ 1, Spark arrestor muffler (Available for diesel engines only) 1 $ $ Engine pre cleaner - Engine Air 1 $ $ Shut-off switch for engine shut-down located on both sides of infeed hopper 1 $ $ Restriction indicator on air cleaner, pop-up type. 1 $ $ Engine block heater 1 $ $ Tachometer and hour meter 1 $ $ Shut- off valve for fuel tank 1 $ $ Mesh strainer in fuel tank filler opening 1 $ $ TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different 3.0 hitches, number these items starting with 3.1, 3.2, etc. 3.1 Tandem 8,000 pound Torflex EZ lube axles with electric brakes 1 $ 1, $ 1, Tandem 10,000 pound Torflex axles with electric brakes 1 $ 2, $ 2, Tandem 10,000 pound Spring axles with air brakes 1 $ 5, $ 5, (4) 235/85R 16" tires mounted on 8-bolt aluminum rims 1 $ $ (4) 235/75R 17.5" tires mounted on 8-bolt heavy-duty gray rims 1 $ $ (4) 215/75R 17.5" tires mounted on 8-bolt heavy-duty gray rims 1 $ $ (4) 215/75R 17.5" tires mounted on 8-bolt aluminum rims 1 $ $ " Buyer's Product pintle hitch 1 $ $ " pintle hitch with Model 20 actuator for hydraulic brake axles 1 $ $ Bolt on spare tire mount 1 $ $ Spare tire mounted on heavy-duty gray rim (235/75R 17.5") 1 $ $ Spare tire mounted on white modular rim (235/85R 16") 1 $ $ Spare tire mounted on heavy-duty gray rim (215/75R 17.5") 1 $ $ Spare tire mounted on aluminum rim for (215/75R 17.5") 1 $ $ Orange fender markers to be mounted on each fender 1 $ $ (2) Mud Flaps (1/4" x 12" x 18") 1 $ $ PRONG (Flat Pin/RV-Style) Male trailer plug 1 $ $ PRONG (Round Pin) Male trailer plug 1 $ $ ,000 pound capacity tongue jack with spring return pad 1 $ $ Hydraulic tongue jack w/ multiple position drop leg 1 $ 1, $ 1, Frame / Fender supports 1 $ $ CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto 4.0 feed, etc. 4.1 Super sized spring loaded slide box feed system with (2) horizontal feed wheels. Top feed wheel is chain driven and is 15 3/4" diameter x 32" wide, and bottom feed wheel is 10 5/8" diameter x 32" wide. 1 $ 1, $ 1, Model 75 back hoe loader with swing-out operator's console, joystick controls, 57 gallon fuel and hydraulic tanks, and model 1850 tapered infeed hopper with 30" weld on tray. (Must select tandem 10,000 pound axle and (4) 235/75R 17.5" tire options.) 1 $ 25, $ 25, Tether remote control kit (Controls: lift cylinder up/down, discharge swivel left/right, discharge flipper up/down, feed forward/reverse, throttle and engine e-stop). (Price includes upgrade to a hydraulic swivel discharge and deflector) 1 $ 7, $ 7, Radio remote control kit with tether back-up (Controls: lift cylinder up/down, feed forward/reverse, discharge swivel left/right, discharge flipper up/down, throttle and engine e-stop). (Price includes upgrade to a hydraulic swivel discharge and deflector 1 $ 9, $ 9, Feed Wheel Engage (tethered version) for RIGHT side of machine only (Features 1 mechanical over hydraulic pedal that will allow for the activation of the feed wheels once pressure is placed on it). 1 $ 1, $ 1, Optional hydraulic bump bar for infeed tray with override buttons on each side of infeed (can be used to halt the forward motion of the feed wheels) 1 $ 1, $ 1, /2" high x 64" wide tapered infeed hopper with steel taillight covers and 30" weld on tray 1 $ $ /2" high x 64" wide tapered 1850 infeed hopper with lexan taillight covers and 30" weld on infeed tray 1 $ $ Clear curtains to be installed on infeed (Please specify whether last chance cables should be mounted in FRONT of or BEHIND curtains) 1 $ $ Rubber infeed curtain for infeed hopper (Please specify whether last chance cables should be mounted in FRONT of or BEHIND curtains) 1 $ $

4 4.11 Special over the top discharge (Folds back hydraulically for transport. Also includes hydraulic swivel and flipper) 1 $ 6, $ 6, Hand crank height adjustable discharge 1 $ $ degree hand crank swivel discharge with 12" adjustable chip deflector 1 $ $ Stops on discharge degree turn. 1 $ $ degree hydraulic controlled swivel discharge chute with manual 12" chip deflector 1 $ 1, $ 1, degree hydraulic controlled swivel discharge chute with hydraulic controlled 12" chip deflector 1 $ 1, $ 1, Special designed replaceable discharge elbow 1 $ $ HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic wench, etc. 5.1 Hydraulic winch mounted on infeed hopper (does not include cable or rope) (Please specify if winch end is to be set-up with aluminum fairlead or steel rollers) 1 $ 2, $ 2, /16" x 200' Amsteel Blue winch rope with HD steel thimble on end (shipped loose) 1 $ $ "Patented" Kar-Tech radio remote control kit for hydraulic winch only (Must also select hydraulic winch option) 1 $ 1, $ 1, "Patented" Kar-Tech radio remote for hydraulic lift cylinder (Note: In lieu of a manual lift cylinder bar, lift cylinder control switches will be mounted on each side of infeed to allow lift cylinder control if needed (must also select hydraulic lift cyli 1 $ 1, $ 1, "Patented" Kar-Tech radio remote control kit for hydraulic winch and hydraulic lift cylinder (Note: In lieu of a manual lift cylinder bar, lift cylinder control switches will be mounted on each side of infeed to allow lift cylinder control if needed. Must 1 $ 2, $ 2, Dual rear hydraulic stabilizers 1 $ 1, $ 1, Hydraulic pressure check system 1 $ $ Hydraulic flow control for feed wheel rate adjustment 1 $ $ Hydraulic oil cooler 1 $ $ Heavy-duty lockable filler cap covers 1 $ $ Mesh strainer in hydraulic tank filler opening 1 $ $ Gate valve for hydraulic tank 1 $ $ OTHER OPTIONS: Use this section to offer other options 6.1 Standard Imron Industrial Urethane Bandit Yellow (For Whole Tree Chippers please specify Chipper 6.2 Standard Imron Industrial Urethane White (For Whole Tree Chippers please specify Chipper 6.3 Standard Imron Industrial Urethane Alert Orange (For Whole Tree Chippers please specify Chipper 6.4 Standard Imron Industrial Urethane Cat. Yellow (For Whole Tree Chippers please specify Chipper 6.5 Standard Imron Industrial Urethane Green (For Whole Tree Chippers please specify Chipper 6.6 Standard Imron Industrial Urethane Black (For Whole Tree Chippers please specify Chipper 6.7 Special Imron Industrial Paint (please specify paint color and number) (Requires specification) 1 $ $ Special Imron 5000 Paint (please specify paint color and number) (Requires specification) 1 $ $ Additional dual-edge knife 1 $ $ Additional dual-edge knife 1 $ $ A.R. plate anvil in lieu of standard 1 $ $ Debris resistant bearing package in lieu of standard 1 $ $ Knife saver kit (includes sharpener, file, safety gloves, and carrying case) 1 $ $ Replaceable knife pocket wear plate - 2 pocket disc 1 $ 1, $ 1, Disc chipper tool kit to change knives 1 $ $ Model 280 wear kit (Includes 3 sets of knives, bolts, and nuts/washers, along with 1 anvil with hardware, knife sharpener, and anvil gauge) 1 $ $ Extra set of oil, air, and fuel filters for Caterpillar and Perkins engines ranging from to 213 horsepower 1 $ $ Tool kit for Handfed Chippers 1 $ $ Wheel chock holders on fenders (2) - Painted Steel (weld on) 1 $ $ Wheel chock holders on fenders (2) - Tread Bright aluminum (bolt on) 1 $ $ Rubber wheel chocks for tires (2) 1 $ $ Degree Amber Strobe Warning Light w/guard 1 $ $ Non skid coating on tongue and all step on areas 1 $ $ Pole style cone holder (weld on) 1 $ $ Special hoop style cone holder (Allows for more cones, click on option number for specs) 1 $ $ Extra chipper operators manual (standard version) 1 $ $ Extra engine operators manual 1 $ $ Wilton 5 1/2" swivel steel vice, w/ mount 1 $ $ Hydraulic Last Chance Cables 1 $ $ /2 pound fire extinguisher with mount 1 $ $ Spring loaded cleanout door (in lieu of standard) 1 $ $ Combination English / Canadian French decals (Note: these would be the safety decals only) 1 $ $ " x 6 1/2" inspection window on belt shield 1 $ $ EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 7.1,7.2, 7.3, etc. Price: 8.00 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip NA

5 PRICE PER LOADED MILE: No Charge 9.00 NEW EQUIPMENT RENTAL PROGRAM - SUMMER RATES - 4/1 THRU 9/30 If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $495/daily Weekly Rental Rate: $2,000 Monthly Rental Rate: $6,000 Percent (%) of Rental Fee applied to purchase price: % NEW EQUIPMENT RENTAL PROGRAM - WINTER RATES - 10/1 THRU 3/31 If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $495/daily Weekly Rental Rate: $2,000 Monthly Rental Rate: $5,000 Percent (%) of Rental Fee applied to purchase price: % If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 0% Discount (See Special Terms and Conditions) Price List Date and Number: 2015 MN State Contract